20
Distribution User Manual Sika ®

Sika User Manual for PDF - · PDF fileWaterproofing of roof slabs, sunken slabs, basements, water tanks,sunshades etc.in combinationwithcement As a bonding agent for ... Sika User

  • Upload
    ngongoc

  • View
    228

  • Download
    2

Embed Size (px)

Citation preview

Dist

ribut

ion

User ManualSika®

Index

Waterproofing Admixtures

Tile Adhesives & Grouts

Bonding Agent

Sika Plastocrete Super 1

Sikacim

Sika Noleek

SikaTop Seal 107

Sika Raingard

Sika Damprof

Sika Latex Power / Sika SBR 100

Sika Raintite I

Sika Cracksil Acrylic Paste /

Sika Rustoff 100

Sika Rustop

Sika Multigard

Sika Wall Décor / Sika Wall Décor #/ Sika Wall Décor I

Sika Tilofix/ Sika Ceram Grey/ Sika Ceram White

Sika Tilogrout / Sika Epoxy Tilogrout

Sika Hibond

®

®

®

®

®

®

® ®

®

®

®

®

®

® ® ®

® ® ®

® ®

®

2

3

4

5

6

7

8

Sika Cracksil 9

10

11

Sika MultiSeal 12

13

14

15

16

17

Repair & Waterproofing

Paint Protection & Surface Treatments

®

® ®

Available Pack Sizes: 100 gm; 500 gm; 1 kg; 5 kg; 10 kg; 20 kg; 100 kg

Sika Plastocrete Super®

1

Water reducing and water�proofing admixture for alltypes of concrete andmortar.

Roof slab casting, DPC,beams, columns, watertanks, culverts, tunnels,sewerage works etc.

Internal and externalplaster of buildings etc.

Repairs

Application Areas:�

Features:Compatible with all varieties of

Portland cement including SlagCement

To be added to gauging water beforeadding to the mix

Required at a very small dosagehence convenient to handle andgreater economy

Improves water tightness to a greatextent

Improves workability withoutincreased water content

Rebound loss is low

No added chloride

100 gm per cement

Dosage:50 kg bag of

Sikacim®

2Available Pack Sizes: 200 gm; 1 kg; 5 kg; 10 kg; 20 kg

L iquid integra l waterreduc ing and wa te r �proofing admixture for alltypes of concrete andmortar.

Casting of roof slabs,DPC, beams, columns,water tanks, culverts,tunnels, sewerage worksetc.

Excellent for internal andexternal plaster of buildingsetc.

Repairs

Application Areas:�

Features:

Dosage:

Compatible with all varieties ofPortland Cement Including SlagCement

To be added to gauging water beforeadding to the mix

Rebound loss is very low

Required at a very small dosage,hence convenient to handle andgreater economy

Improves water tightness to a greatextent

Improves workability withoutincreased water content

Acts to disrupt the leakage causingcapillary structures formed in concreteto cause leakages

No added chloride

200 gm for two 50 kg bags of cement

Sika Noleek®

3Available Pack Sizes: 1 kg

Integral waterproofingadmixture in powder formfor concrete and mortar.

Casting of roof slabs,DPC, beam, columns, watertanks, culverts, tunnel,sewerage works etc.

Specially suitable forsloped roof casting

Excellent for internal andexternal plaster of buildingsetc.

Repairs

Application Areas:�

Features:

Dosage:

Compatible with all varieties ofPortland Cement including SlagCement

To be added directly to the mix

Effective pore filler to prevent waterseepage

Easy compaction resulting in denserconcrete

Reduced shrinkage,better finish

No added chloride

1 kg per 50 kg bag of cement

SikaTop Seal�107®

4Available Pack Sizes: 5 kg 25 kgSystem; System

Two component ready touse acrylic based water�proof coating system.

For waterproofing of structuralelements like:

Water tanks

Basements

Roof slabs

Terraces

Balconies

Sunshades

Sunken toilets

Swimming pools

Retaining walls

Sea walls etc.

Application Areas:

Features:

Coverage:

Easy to apply by brush or in thintrowel applications

Prebatched, no additional cement,sand and water required to make theslurry

Easy and fast mixing

Very good adhesion with sound andprepared substrates

Protects concrete against waterpenetration,chloride and carbonation

Approved for potable water contact

Flexible enough to bridge hairlinecracks

3 kg/m for 2 coats (upto 1mpressure head), higher dosage forgreater pressure heads

2

Sika Raingard®

5Available Pack Sizes: 12 kg System

Single component glassfibre reinforced acrylicwaterproofing cum heatreflecting type membrane.

Suitable for all types of :

Water tanks

Basements

Roof s labs( f la t andsloped)

Terraces and balconies

Sunshades

Sunken toilets

Swimming pools andother exposed wet areas.

Application Areas:

Features:

Coverage:

Surface to be primed with SikaRaingard Primer before application ofcoating

Highly flexible and crack�bridging

UV rays and weather resistant

Provides cooling effect to homeinteriors

Bonds well to all types of concrete,brickwork, corrugated asbestos, brick�bat�coba substrates etc.

No screeding required for normalfoot traffic

Sika Raingard Primer: Approx. 200gm / m / coat

Sika Raingard:Approx 1.5 kg / m /3 coats (with Sika Fab1)

®

®

2

® 2

®

Sika Damprof®

6Available Pack Sizes: 500 gm

Injectable inorganic liquidfor arresting rising damp�ness.

Failure of damp proofcourse (DPC) at plinth level

Absence of damp proofcourse at plinth level

Application Areas:�

Features:

Mixing Ratio:

Dosage:

Comes with injection syringe andnipple

Spacing of injection ports to bebased on the extent of the problem

Needs no replastering whenexisting plaster is intact

No decay inside concrete/masonrydue to inorganic nature

Economical

Long lasting effect

Dilute 500 gm pack Sika Damprofwith 5�6 kg water (1:10�12 dilution)

250�350 ml diluted Sika Damprofper injection port

®

®

Sika Latex Power / Sika SBR 100® ®

7Available Pack Sizes: 250 gm 500 gm 1 kg 5 kg 10 kg 20 kg; ; ; ; ;

SBR based multipurposepolymer for waterproofingand repair.

For waterproofing of roofs labs , sunken s labs ,basements, water tanks,sunshades etc. in combinationwith cement

As a bonding agent foruses in repair and plastering

For making polymermortar for repairs mortarsetc.

Treatment for leachingand salt petre action

Multipurpose mortaradmixture for injectiongrouts

Application Areas:�

Features:

Coverage:Approx. 10�15% by weight of cement

depending on nature of work.

Improves elasticity, flexibility, tensilestrength of cement and reduces cracking

Makes the mortar waterproof andreduces susceptibility to acids andgases, salt petre action etc.

Mortar with Sika Latex Power /Sika SBR 100 shows extremely goodbonding to bases like concrete, stone,brick etc.

Reduces viscosity of cementinjection grout and improves bond ofcured injected materials withsubstrates

Sika Latex Power can be diluted withwater (1 : 4 � 6) and Sika SBR 100 canbe diluted with water (1 : 4 – 8)depending on the type of application

®

®

Sika Raintite I®

8Available Pack Sizes: 250 gm 500 gm 1 kg 5 kg 10 kg 20 kg; ; ; ; ;

Acrylic based polymer forwaterproofing and repair

Waterproofing of roof slabs,sunken slabs, basements,water tanks, sunshades etc. incombination with cement

As a bonding agent foruses in repair and plastering

For making polymermortar for repairs mortarsetc.

Treatment for leachingand saltpetre action

Multipurpose mortaradmixture for injectiongrouts.

Additive to cement basedpaints for waterproofing

Application Areas:�

Features:

Coverage:

Ensures low water:cement ratio.Improved impermeability against water

ingress.Extremely good bonding to moist

subst ra tes , ex t remely improvedmechanical, flexural strength andabrasion resistance properties.

UV resistant & suitable for externalcoating

When used as an additive to cementbased paint improves impermeability,water repellency and anti fungal propertyof the painted surface (site trials arealways advised before application forshade variations, if any).

As 10�20% by weight of cementdepending on the nature of application.

� Sika Raintite I can be diluted with water(1 : Nil to 1 : 2) depending on the type ofapplication

Available Pack Sizes: Sika CracksilAcrylic Paste� ; Sika Cracksil ;® ®500 gm 1 kg & 1 kg 5kg

Sika Cracksil AcrylicPaste

Sika Cracksil

Application Areas:

®

®

is an acrylic basedready to use non�shrinkcrack filling mortar in pasteform.

is a ready touse non�shrink crack fillingmortar in powder form.

For repairing cracks onplasters and walls

Suitable for both verticaland horizontal applicationswherever hairline cracksare observed

Features:

Coverage:

Sika Cracksil Acrylic Paste

Sika Cracksil

Non�shrink

For both internal and externalsurfaces

Hairline cracks should be opened toat least 1mm for ease of application

For non�moving cracks upto 5 mmwide in plasters and walls

Not suitable for typical stress cracksat junctions of wall and columns, intelbeam and masonry etc. whereSikaflex Construction (J) should beused

1kg pack covers�40�50 rm (6 mm x6 mm)

1kg pack covers�30�40 rm (6 mm x6 mm)

®

®

®

Sika Cracksil Acrylic Paste /Sika Cracksil

®

®

9

Sika Rustoff 100®

Available Pack Sizes: 250 gm 500 gm 1 kg 5 kg 20 kg; ; ; ;

R u s t r e m o v e r c u mpassivator.

C leans new or o ldreinforcement steel inconstruction

Cleaning various steelstructures like tanks, waterpipelines, effluent pipelines,Trusses, purlins, rafters etc.shops

Cleaning ball bearings,valves, tools etc. in machineshops and auto repair shops

Application Areas:�

Features:

Sika Rustoff 100

Coverage:

Completely removes rust

Prevents further rusting byproviding a passivating coat

To be applied with brush, cottonwaste swab or spray gun on theaffected metal surface

For repairable structures whenapplied with brush /spray gun canreach even the most difficult rustedareas with congested reinforcements

After application on the rusted arealeave

Apply a preventive coating like SikaRustop once rust is cleaned

Approx one pack of 1 kg covers 30sft for 2 coats depending on thediameter of the rods.

®

®

10

Sika Rustop®

Available Pack Sizes: 1.25 kg 2.50 kgSystem; System

Anti corrosive coating forsteel & concrete

Protects new or oldreinforcement steel inconstruction from corrosion

Ideal for protect ingr e i n f o r c e m e n t s w i t hinsufficient cover or in thinsections

Protects concrete againstthe action of CalciumChlorides and de�icing salts

Application Areas:�

Features:

Coverage:

Impervious anti corrosive coating toprevent ingress of water, chlorides andcarbon dioxide

Excellent adhesion to steel andconcrete and mortar

Contains corrosion inhibitors

For structures under repair orrehabilitation the corroded surfacesmust be cleaned from rust using SikaRustoff 100

Approx one pack of 2.5 kg covers 6sft for 2 coats depending on thediameter of the rods

®

11

Sika MultiSeal® ®

Available Pack Sizes: 10 m 5 cm 10 m 10 cmx ; x

Multipurpose self�adhesivebituminous sealing tape forwaterproofing and repair.

Seal ing and repair ingagainst water ingress anddraughts in:

Roofs, including sheetmetal work, asbestos sheet,tarfelt etc.building cracks

Pipe joints and perimeter

Junction of roof andparapet walls

Miscellaneous applica�tions

Application Areas:

Features:

Coverage:

Painted aluminum foil with siliconerelease film,matt grey finish

Good adhesion to various kind ofsubstrates

Weather and waterproof

Self�adhesive

UV�resistant

Bitumen�resistant

Can be over�paintedCan be applied at low and high

temperatures

Not intended to withstand foot orvehicular traffic

1 roll of 10 m x 5 cm covers 0.5 m ,1 roll of 10 m x 10 cm covers 1.0 m .

2

2

12

Sika Multigard®

Available Pack Sizes: 600 gm System

Water based breathableepoxy undercoat for indoorpaints.

Can be appl ied onabsolutely damp surfaceswithout peeling off

Used as an undercoat forwall putty/paint on internaldamp patches on walls etc.

Can be appl ied onconcrete, stone, plaster,rendering etc.

Application Areas:�

Features:

Coverage:

For indoor application only

No solvent ,no fire hazard

Breathing out characteristic allowsentrapped moisture to breath outthrough the coating

Excellent finish in base white color

No sagging in vertical application

Can be stained with good qualitywater based stainer for light shades tomatch the background color in case noovercoat of paint is to be applied

Overcoat of Sika Wall Décor or wallputty can be applied before paintingonce the entrapped moisture breathesout

Approx one pack of 600 gm covers20 sqft for 2 coats.

®

13

Sika Wall Décor / Sika Wall Decor # /Sika Wall Decor I

® ®

®

Available Pack Sizes: 5 kg 20 kg;

A ready to use waterproofsurfacing material forfinishing works for indoorand outdoor applications.

White cement basedfinishing / smootheningmaterial for indoor andoutdoor plastered surface

Renders a smooth anddurable surface and acts asan under layer for all kind ofdecorative paints

Application Areas:�

Features:

Coverage:

Good adhesion to substrate, doesnot stick to the palm when rubbed

Excellent waterproofing capability

Easy to clean

Prevents flaking of paints

Excellent white colour

Can be stained with a good qualitywater based stainer for light shades

Excellent coverage

One bag of 20 kg covers approx100�110 sft in 2 coats for maximumthickness of 1.5 mm depending onsurface level.

14

Sika Tilofix / Sika Ceram Grey /Sika Ceram White

® ®

®

Available Pack Sizes: 5 kg 20 kg;

Ready to use tile adhesivefor wall and floor tile fixing.

is suitablefor fixing ceramic andmosaic new tiles on wall andfloor.

Must for tile on tileapplication for repair andrehabilitation works

issuitable for fixing vitrified,ceramic and mosaic tiles onwall and floor

isideal for fixing vitrified,ceramic, glass mosaic andmarble tiles

Application Areas:

Sika Tilofix

Sika Ceram Grey

Sika Ceram White

®

®

®

Features:

Minimum thickness:

Coverage

Ready to use,only water to be added

Contains special chemicals toobtained non�shrink, waterproof andexcellent adhesion properties

Fast setting and quick strengthdevelopment

3 mm forSika Tilofix and 5 mm for SikaCeram Grey and White using anotched trowel

Must for fixing tile on existing tilewithout removal of old tiles

After laying the newly laid floor canbe used after 24 hrs

1 bag of 20 kg (Sika Ceram Greyand White) covers approx 50�60 sqft.

1 bag of 20 kg (Sika Tilofix) coversapprox 70�80 sqft.

® ®

®

®

15

Sika Tilogrout / Sika Epoxy Tilogrout® ®

Available Pack Sizes: Sika Tilogrout � ; Sika EpoxyTilogrout � System® ®500 gm 1kg & 4.8 kg

It is a ready to use water�proof coloured tile joint filler.

Sika Tilogrout is a gapfilling material betweendifferent wall and floor tileslike ceramic, glazed, vitrified, mosaic, glass mosaic andmarble tiles etc.

Sika Epoxy Tilogrout isalso suitable for heavy dutyjoint filling applications likeindustrial floor joint fillingalong with domestic andcommercial buildings

Application Areas:®

®

Features:Sika Tilogrout

Sika Epoxy Tilogrout

Coverage: Sika Tilogrout

Sika Epoxy Tilogrout

®

®

®

®

Cementitious, only water to beadded

Available in standard Sika shades.Excellent bond with tiles

Extremely rigid on setting andwithstands high degree of wear andtear

Mixed material must be consumed in30 mins

Approx 1 kg of Sika Tilogrout covers70�80 sqft (vitrified tiles) 90�100 sqft(Ceramic tiles) for 3 mm joint width.

Approx 1 kg of mixed system ofSika Epoxy Tilogrout covers 60�90 sqftdepending on the type of tiles for 3 mmjoint width.

®

®

16

Sika Hibond®

Available Pack Sizes: 600 gm 1.2 kgSystem; System

As a structural bondingagent between old and newconcrete to prevent coldjoints and other similarpurposes.

To be applied on cold jointsduring old�new concretebonding for:

Roof slabs, Retainingwalls,Water tanks,Columns

Also acts as a bondingagent for :

Steel

Iron

Epoxy Mortar

Application Areas:

Features:

Coverage:

Solvent free pre�batched system

Greater tensile strength thanconcrete

Long pot life and open time allowssufficient time for placement of newconcrete

Can be applied on moist surfacealso

Once the two components of thematerial are mixed the material mustbe used within its potlife of approx. 3hrs (at 30 C)

1 Pack of 600 gm covers approx.170�180 sqft.

0

17

Swiss Technology with Indian Values

Know�howfrom Site to Shelf

Waterproofing andConstruction Chemicalsfrom Sika Since 1910

Sika India Pvt. Ltd.301�302, Interface Building No. 16,Off Link Road, Malad (W),Mumbai – 400064Tel : +91 22 40384038Fax : +91 22 40384039Email : [email protected] : www.sika.in

An ISO 9001 : 2000

Company

1000

0/M

arch

200

9