Signature 100S

IGN

ATU

RE S

ER

IES

The Excel® Signature 100 Series bales the following materials:Office Paper, Newspaper, OCC, Magazines, PET, HDPE, Aluminum Cans, Tin Cans, Painted Aluminum Siding, Insulated Wire, Aluminum Extrusions, Radiators, Misc. Non-Ferrous, Solid Waste

Standard Features Include:• Two (2) 50 HP TEFC Motors, Standard Voltage - 460 Volt, 60 Hertz, 3 Phase• Bale Separation Door• Energy Savings Baling Operation • Programmable Touch Screen Display• Allen Bradley Programmable Logix Controller• Optional Mobile Command Remote Control• Bale Counter and Throughput Reporting• Hardox® 450 Replaceable Wear Liners• 24" of True Bale Chamber Penetration (Allowing 8" of Overcharge)• Automatic Bale Release Door & Automatic Shear Jam Correction• Excel Manufacturing Autonetics™ with Absolute Ram Position Sensor• USB Modem for On-Line Diagnostics and Program Upgrades• Air to Oil Heat Exchanger• NEMA 12 Rated Enclosures and Controls• Safety Interlocking Entry System• Rotatable Heat Treated Tool Steel Shear Blades• 675 Gallon Hydraulic Reservoir with Regenerative Circuit• Hour Meter• UL, CUL, CSA Approved • Integrated Steel Platen Wiper• Sandblasted, Primed, Painted and then Assembled for Long Lasting Durability• Bale Discharge Platform • One Year Excel Manufacturing Limited Warranty (Parts & Labor)• Available with Excel Manufacturing Integrated Conveyors with Rubber or Steel Belts for a Turn-key System

Signature 100Excel Manufacturing takes durable interlocking chassis construction and efficient high volume baling to the next level. Vowing to never compromise on components or on quality in structure, Excel Manufacturing has revolutionized hands off “operatorless” two ram baling with the Signature Series baler.

GENERAL SPECIFICATIONS Signature 100 TWIN RAM SERIES

LENGTH 33' with Stairs & Platform WIDTH 25' HOPPER OPENING 70" W x 76" L FEED OPENING 55" W x 76" L CHAMBER FLOOR 1-1/4" Plate Plus 3/8" Hardox 450 Liner CHAMBER SIDEWALLS 1-1/4" Plate Plus 3/8" Hardox 450 Liner SHIPPING WEIGHT 88,000 lbs. (32,850 kg)

MAIN CYLINDER High Force, High Speed Design (10" Bore x 130" Stroke x 7" Chrome Rod)

EJECT CYLINDER 9" Bore x 7" Chrome Rod OIL RESERVOIR 675 Gal. (2,555 liters) INDEPENDENT PUMPS 237 GPM (897 LPM) w/Separate Cooling Loop

MOTORS 2-50HP (112KW) TEFC; 460v, 3 Phase SYSTEM PRESSURE 4,000 PSI (293 bar) OVERALL PLATEN FORCE 314,160 lbs. (142.50 tonnes) PLATEN PSI 204 PSI (14.07 bar) CYCLE TIME ADJUSTABLE 15 Seconds (60Hz) BALE SIZE 60"L x 30"H X 39"- 49" W

OCC 1,550 lbs. (579 kg) 16 TPH MAGAZINES 2,200 lbs. (821 kg) 26 TPH NEWSPAPER 1,700 lbs. (635 kg) 28 TPH ALUM CANS (UBC’S) 1,000 lbs. (373 kg) 10 TPH HDPE PLASTICS 1,350 lbs. (504 kg) 9 TPH PET PLASTICS 1,325 lbs. (495 kg) 10 TPH SOLID WASTE 2,200 lbs. (821 kg) 26 TPH TIN CANS 2,200 lbs. (821 kg) 26 TPH ALUMINUM EXTRUSIONS 1,500 lbs. (579 kg) 11 TPH PAINTED ALUM SIDING 2,100 lbs. (784 kg) 14 TPH ALUM RADIATORS 2,000 lbs. (747 kg) 14 TPH INSULATED COPPER WIRE 3,700 lbs. (1,381 kg) 28 TPH MISC. NON-FERROUS 1,700 lbs. (635 kg) 12 TPH

• Automatic Tie System• Bale Discharge Platform• Lower, Middle & Upper Photo Eyes• Complete Factory On-line Diagnostics• Automatic Oversized Bale Release

• “Hands Off” Operatorless Design• Absolute Ram Position Sensor (No Limit Switches or External Sensors)• Automatic Bale Release Door• 24” Bale Chamber Penetration

• Conveyor Starter with Controls • Replaceable Hardox Wear Liners • Allen Bradley Programmable Touch Screen

STRUCTURAL

PERFORMANCE DATA

BALE WEIGHTS*

FEATURES

*Bale weights are based on actual customer surveys and may differ with moisture content, material density, etc.

*To provide our customers with the best possible equipment & offer the latest in product improvements, these specifications are subject to change without notice and without incurring responsibility to units sold previously.

Form 1 Revised March 2011

EXCEL Manufacturing, Inc.(800) 475-8812

P.O. Box 428 • 778 W. 12th St. • St. Charles, MN 55972(507) 932-4680 • fax (507) 932-4683 • www.excelmfg.com