Upload
others
View
78
Download
1
Embed Size (px)
Citation preview
page1
SIG
NA
L IN
TEG
RIT
Y M
EASU
REM
ENT
SOLU
TIO
N
Signal Integrity Measurement Solutions
Bit Error Rate Tester • ML4039,ML4039B,ML4039A/ML4009
–4x30Gbps/1x30Gbps BERT
• ML4039-JIT/ML4039B-JIT/ML4009-JIT
– BERT with Jitter Generation
• ML4039B-EQL/ML4009-EQL
– BERT with 9-Tap Emphasis
• ML4009-HV
– BERT with High Amplitude to 4V
• ML4039C
–4x30G BERT with NRZ/PAM4 Support
Time Domain Analyzers • ML4004
–3.1-5, 6.2-15 and 18.6-32 Gbps BERT
and50 GHz BW DSO
• ML4004-JIT
–With jitter Generation
• ML4004-PAM
–2x60 Gbps PAM4 BERT with 50 GHz BW
Scope
• ML4004-HV
–With High Amplitude to 4V
• ML4003B
–BERT and twin Scope combo
PORTjack • Portable Tester Platform & Plug-ins
–ML4004-JIT
– 8x TDR
–400G BERT ML4054-CFP8 with adapters:
- CFP8 – OSFP
- CFP8 – CFP2-DCO
- CFP8 – QSFP-DD
- CFP8 - uQSFP
Module Compliance Board • CFP: ML4018
• CFP2: ML4043
• CFP2-ACO: ML4027-ACO
• CFP2-DCO: ML4027-DCO
• CFP4: ML4049
• CFP8: ML4057
• MicroQSFP: ML4044
• QSFP28: ML4041-K&ML4021-K
• QSFP+: ML4021
• QSFP-DD: ML4062-MCB
• SFP28: ML4024
• OSFP: ML4064-MCB
• CXP2: ML4063-MCB
Host Compliance Board • CFP: ML4014
• CFP2: ML4028
• CFP2-ACO: ML4028-ACO
• CFP2-DCO: ML4028-DCO
• CFP4: ML4052
• CFP8: ML4058
• MicroQSFP: ML4045
• QSFP28/QSFP+: ML4020 & ML4020-N
• QSFP-DD: ML4062-HCB-Tx/Rx
• SFP28: ML4023& ML4023-N
• OSFP: ML4064-HCB-Tx/Rx
• CXP2: ML4063-HCB
Adapter • CFP2 to QSFP28: ML4086
400G BERT • ML4054/DCO/CFP8/QSFP-DD
Services • Compliance Test Suite
• Compliance Services
Digital Sampling Oscilloscope • ML4025/ML4006
–4x50 GHz/1x50 GHz DSO
Optical Sampling Oscilloscope • ML4025C/ML4005C
–4x10GHz/1x10GHz Optical Scope
• ML4005D/ML4025D
–25GHz Optical Scope
page2
SIG
NA
L IN
TEG
RIT
Y M
EASU
REM
ENT
SOLU
TIO
N
cPCI Chassis Based Instruments
Standalone Instruments
ATE Instruments
4-Lane Digital Sampling Oscilloscopes
ML4025-50 50 GHz Differential 4-LaneDigital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement
ML4025-32 32GHzDifferential 4-LaneDigital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement
ML4025C 9.5 GHz Optical /32 GHz Electrical, Differential 4-Lane Sampling Scope, 780-1600nm
ML4025D 25 GHz Optical/50GHz Electrical 4-Lane Digital Sampling Oscilloscope, Jitter decomposition, PAM4 meas.
4-Lane Bit Error Rate Testers
ML4039 8.5- 15 and 21- 30Gbps BERT for production testing, Pre-emphasis, Post-emphasis, Bathtub, Eye Contour, CTLE
ML4039-JIT 8.5- 15 and 21- 30 Gbps BERT with Phase Modulation, Amplitude Modulation Jitter Generation, Skew Control
ML4039A-JIT 3.1-5, 6.2-15 and 18.6-32Gbps BERT with Phase and Amplitude Modulation Jitter Generation, Skew Control
ML4039B 1 to 32GbpsBERT continuous bit rate coverage and 4 independent time bases.
ML4039B-JIT 1 to 32 Gbps BERT continuous bit rate coverage and 4 independent time bases with jitter generation
ML4039B-EQL 1 to 32 Gbps BERT with 9-tap equalizer characterization and pre-emphasis with 20dB range
ML4039C 3.1-5, 6.2-15 and 18.6-30 Gbaud BERT. Supports NRZ & PAM4
BERT and Scope combo
ML4003B 1 to 30 Gbps BERT with SFP28 Port, 32GHz DSO & 10GHz Optical Scope
ML4003BX PON tester with 25 GHz O/E ref. receiver and H/W filters for 1.25, 2.5 and 10G. AWG for burst control. SFP28 and XFP ports. 32 GHz DSO. 1 – 30 Gbps BERT
1-Lane Bit Error Rate Testers
ML4009 8.5- 15 and 21- 30Gbps BERT for production testing, Pre-emphasis, Post-emphasis, Bathtub, Eye Contour, CTLE
ML4009-JIT 8.5- 15 and 21- 30 Gbps BERT with Phase Modulation, Amplitude Modulation Jitter Generation, Skew Control
ML4009-HV 8.5- 15 and 21- 30 Gbps BERT with High voltage output up to 4Vdiff
ML4009-EQL 8.5- 15 and 21- 30 Gbps BERT with 9-tap equalizer characterization and pre-emphasis with 20dB range
Time Domain Analyzers
ML4004 3.1-5, 6.2-15 and 18.6-32Gbps BERT and 50GHz DSO
ML4004-JIT 3.1-5, 6.2-15 and 18.6-32Gbps BERT and 50GHz DSO with jitter generation
ML4004-PAM 2x60Gbps PAM4 BERT with 50GHz BW Scope
ML4004-HV 3.1-5, 6.2-15 and 18.6-32Gbps BERT and 50GHz DSO with high amplitude up to 4V
1-Lane Digital Sampling Oscilloscopes
ML4005C 9GHz (12Gbps)Optical /32GHz Electrical Sampling Scope, 780-1600nm
ML4005D 25GHz Optical /32GHz Electrical Sampling Scope, 780-1600nm
ML4006-50 50GHz Digital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement
ML4006-32 32GHz Digital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement
4-Lane Digital Sampling Oscilloscopes
ML4025-ATE 32GHz Digital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement
4-Lane Bit Error Rate Testers
ML4039-JIT-ATE 30GBERT with Phase Modulation, Amplitude Modulation Jitter Generation, Skew Control
page3
SIG
NA
L IN
TEG
RIT
Y M
EASU
REM
ENT
SOLU
TIO
N
Portable Tester
Interconnect Test Products
Module Model # Description
CFP2 Breakout Module/ HCB
ML4028 10x10 Gbps with high-density connector rows
4x25G Retimed Loopback Module
ML4029 4x25-28 Gbps CDR, MSA compliant, PRBS generator and detector, temperature monitor, custom memory maps, input & DFE adaptation to optimize eye opening
10x10G Passive Loopback Module
ML4030-SR10 10x10 Gbps. MSA compliant with programmable power dissipation up to 12W, insertion counter, custom memory maps
10x10G Passive Host/MCB
ML4042 10x10 Gbps, current sense, 18 GHz Right Angle SMA connectors. Comes with Windows GUI
10x10G Retimed Loopback Module
ML4043-SR10 10x10-14.5 Gbps, customized memory maps, input & DFE adaptation to optimize eye opening, insertion counter, wide range CRU
4x32G ACO Passive Host/MCB
ML4027-ACO 4x32 Gbps, MSA compliant master, current sense with 2.92mm connectors, provide an easy solution for programming CFP2-ACO
Breakout Module/ HCB
ML4028-ACO 4x32 Gbps, 40GHz with high-density connector rows featuring an insertion loss of 2.4dB at 16GHz
Breakout Module/ HCB
ML2028K-ACO 4x32 Gbps, 40 GHz with K connectors featuring an insertion loss of 1.1 dB at 16 GHz
4x32GPassive Loopback Module
ML4030-ACO 4x32 Gbps, MSA compliant housing offering heat dissipation up to 12W, programmable to different
power levels
4x25G Passive Loopback Module
ML4030-LR4 4x25 Gbps, MSA compliant housing offering heat dissipation up to 12W, programmable to different
power levels 8x25G DCO Passive Host/MCB
ML4027-DCO 8x25 Gbps, MSA compliant master, current sense with 2.92mm connectors, provide an easy solution for programming CFP2-DCO
Breakout Module/ HCB
ML4028-DCO 8x25 Gbps, 40GHz with high-density connector featuring low insertion loss
8x25GPassive Loopback Module
ML4030-DCO 8x25 Gbps, MSA compliant housing offering heat dissipation up to 24W, programmable to different power levels
Coherent Modulation Analyzer
ML4065 4x50GHz Sampling Scope with Phase and Amplitude measurement for calibrating CFP2 ports line cards
CFP
Passive Host/MCB ML4018 10x10 Gbps, MSA compliant, current sense/limit monitor with insertion loss of 0.65dB at 5.15 GHz. Comes with Windows GUI
Breakout Module/ HCB
ML4014 10x10Gbps, featuring a low insertion loss of 0.625 dB at 5.13 GHz
Passive Loopback Module
ML4013 10x10 Gbps, MSA compliant, programmable power dissipation up to 24W, temperature sensing, customized memory maps
Passive Loopback Module
Ml4013-HP 10x10 Gbps, MSA compliant, programmable power dissipation up to 40W, temperature sensing, customized memory maps
CFP4 Passive Host/MCB ML4049 4x28 Gbps, 40 GHz with 2.92 mm K connectors, MSA compliant with low insertion loss,
Breakout Module/ HCB
ML4052 4x28 Gbps, high-density connector rows with low insertion loss of 0.9 dB at 16 GHz
Passive Loopback Module
ML4050 4x28 Gbps, customized memory map, MSA compliant, programmable power dissipation up to 6.5W
PORTjack Portable Tester with Plug-ins: ML4004-JIT, 8x TDR, and 400G BERT ML4054-CFP8 with: CFP8-OSFP, CFP8-CFP2 DCO, CFP8-QSFPDD, and CFP8- uQSFP adapters
page4
SIG
NA
L IN
TEG
RIT
Y M
EASU
REM
ENT
SOLU
TIO
N
CFP8
Passive Host/MCB ML4057 Supports 16x25 Gbps, 8x50G PAM and CFP8-ACO, MSA compliant master, 2x8 40GHz Huber & Suhner _2x8 Connectors with a low insertion loss 1.4 dB at 16 GHz
Breakout Module/ HCB
ML4058 MSA compliant, supports 16x25 Gbps, 8x50 Gbps PAM and CFP8-ACO. 1x8 40GHz Huber & Suhner Connectors with low insertion loss 1.9 dB at 16 GHz
Breakout Module/HCB
ML4058-N MSA compliant, supports 16x25 Gbps, 8x50 Gbps PAM and CFP8-ACO. 1x8 40GHz Huber & Suhner Connectors with low insertion loss at 16 GHz: 2.7 dB for the longest path and 1.3 dB for the shortest path
Passive Loopback Module
ML4059 Supports 16x25 Gbps, 8x50 Gbps PAM and CFP8-ACO, MSA compliant, Superior SI performance and supports 28 Gbps Analog Coherent, programmable power dissipation up to 21W
Eye Opener Active Loopback
ML4059-EO Transmit data from the host is passing through the eye opener and is electrically routed, (internal to the loopback module), to the receive data outputs and back to the host.
QSFP-DD
Passive Host/MCB ML4062-MCB 8x50 Gbps, 49 GHz with 2.92 mm k connectors, current sense/limit monitor with low insertion loss. Comes with Windows GUI
Breakout Module/HCB
ML4062-HCB-Tx ML4062-HCB-Rx
8x50 Gbps, K connector rows with low insertion loss
Passive Loopback Module
ML4062-R ML4062-S
Supports 8x50 Gbps electrical interface, built with advanced PCB material and programmable power dissipation up to 14 W. Comes with ribbed or smooth shell.
Eye Opener Active Loopback
ML4062-EO Transmit data from the host is passing through the eye opener and is electrically routed, (internal to the loopback module), to the receive data outputs and back to the host.
Controller ML4062-CNT host board to supply power to the QSFP-DD modules, and an I2C master that allows to read/write the registers, it comes with a GUI
Analyzer ML4062-ANA QSFP-DD I2C and State Machine Host Tester with PS noise monitor
Breakout ML4062-BO 8x50 Gbps, 2x8 Huber+Suhner MXP Connector rows with low insertion loss
MicroQSFP
Passive Host/MCB ML4044 Supports 4x28 Gbps interfaces.,40 GHz Grooved 2.92 mm K connectors with low insertion loss 0.5 dB at 16 GHz, and high performance signal integrity traces from K connectors to MicroQSFP host connector
Breakout Module/HCB
ML4045 High Performance signal integrity traces and supports 4x28 Gbps TX & RX Lanes, 40 GHz Grooved 2.92 mm K connectors with low insertion loss 1.2 dB at 18 GHZ
Passive Loopback Module
ML4046 Support 4x28 Gbps, I2C slave interface compliant with SFF 8679, programmable power dissipation up to 5 W and high performance signal integrity traces
Analyzer ML4046-ANA MicroQSFP I2C and State Machine Host Tester with PS noise monitor
QSFP28
Passive Host/MCB ML4041-K 4x28 Gbps, MSA compliant, 40 GHz with K connectors, current sense/limit monitor with low insertion loss of 0.5 dB at 16 GHz. Comes with Windows GUI
Breakout Module/ HCB
ML4020 4x28 Gbps, high-density connector rows with low insertion loss of 1.5 dB at 16 GHZ
Passive Loopback Module
ML4002-28 MSA Compliant, programmable power dissipation up to 3.5 W
ML4012-28-LC Low cost Loopback Module featuring superior signal integrity
ML4002-28-C5 4x28 Gbps, Insertion Counter, Power dissipation up to 5W, with programmable power ramp up
QSFP+
Passive Host/MCB ML4021 4x14 Gbps, MSA compliant functionality, current monitoring and a programmable power supply 16 SMA connectors,
Passive Loopback Module
ML4002 4x14 Gbps, MSA compliant programmable power dissipation
SFP28
Passive Host/MCB ML4024 28 Gbps, 40 GHz with 2.92 mm K connectors, current sense/limit monitor with low insertion loss of 0.5 dB at 16 GHz. Comes with Windows GUI
Breakout Module/ HCB
ML4023 28 Gbps, 4 2.92 mm 40 GHz K connectors with low insertion loss of 1 dB at 16 GHz
Breakout Module/ HCB ML4023-N 28 Gbps, K connector rows with low insertion loss
Passive Loopback Module
ML4026-28 MSA Compliant, programmable power dissipation up to 6 W
page5
SIG
NA
L IN
TEG
RIT
Y M
EASU
REM
ENT
SOLU
TIO
N
OSFP
Passive Host/MCB ML4064-MCB 8x50 Gbps, 2.92 mm K connectors, current sense/limit monitor with low insertion loss. Comes with Windows GUI
Breakout Module/ HCB
ML4064-HCB-Tx ML4064-HCB-Rx
8x50 Gbps, OSFP MSA Compliant, high-density connector rows with low insertion loss
Passive Loopback Module
ML4064 Supports 8x50 Gbps electrical interface, built with advanced PCB material and programmable power dissipation up to 16 W.
Eye Opener Active Loopback
ML4064-EO Transmit data from the host is passing through the eye opener and is electrically routed, (internal to the loopback module), to the receive data outputs and back to the host.
Breakout ML4064-BO 8x50 Gbps, high-density connector rows.
Analyzer ML4064-ANA OSFP I2C and State Machine Host Tester with PS noise monitor
page6
SIG
NA
L IN
TEG
RIT
Y M
EASU
REM
ENT
SOLU
TIO
N
Adapter
ML4086 CFP2 to QSFP28, MSA compliant passive adapter
ML4086-Ret CFP2 to QSFP28, MSA compliant retimed adapter
ML4086-Fec CFP2 to QSFP28, MSA compliant retimed with Forward Error Correction adapter
ML4054-QSFP28 Combination of a dual 4-lane BERT with two QSFP28 MCBs, Ultra Compact: Stand Alone. Tests QSFP28 transceivers and cables, handles data Rates: 3.1–5, 6.2–15 and 18.6 – 30.2 Gbps and air-tight and robust shell. Low Cost.
400G BERT
ML4054-CFP8 400G CDAUi-8 & CDAUi-16 BERT. 3 Variants: Portable, EVB or Benchtop. Low cost. Full-fledged BERT and CFP8 analyzer. 16 x 28G NRZ or 8 x 56G PAM4 Channels
ML4054-DCO Adapter CFP8 to CFP2-DCO. Supports 8x25G or 8x50G. Ultra Compact: Stand Alone. Low cost.
ML4054-QSFP-DD Combination of a dual 4-lane BERT with QSFP-DD. Ultra Compact: Stand Alone. Low cost.
ML4054-OSFP Combination of a dual 8-lane BERT with OSFP. Ultra Compact: Stand Alone. Low cost.
SERVICES
Compliance Test Suite
OIF-CEI3.1 or CAUI-4
Reduce your DUT testing time from days to less than an hour with the ML automated compliance test suite. Comes in two flavors: IEEE802.3bm or OIF-CEI3.1
Compliance Services Send us your DUT and we do the compliance tests for you and generate a comprehensive report
Worldwide MultiLaneSAL Houmal Technology Park 141 Main Road Houmal, Lebanon +961 5 941668 Website: www.multilaneinc.com E-mail: [email protected]
North America & Europe
MultiLane Inc 2000 Wyatt Drive, Suite 6 Santa Clara CA 95054 USA +1 408890 2234
Asia MultiLane AsiaInc No. 18, Prosperity Rd. 2 Hsinchu Science Park, 30078 Taiwan +88636686667