Upload
others
View
21
Download
0
Embed Size (px)
Citation preview
www.usseamless.com | 3
Siding ProfilesPlatinum Series™ ............................................................... 20-21Mountain Cedar® Collection ............................................... 20-21Northwoods Collection™ ...........................................................22
Color Palette ..........................................................23
Rainware & AccessoriesPlatinum Series™ Steel Downspouts & Elbows .........................24 Platinum Accessories™ Aluminum Downspouts & Elbows .........24Platinum Accessories™ Aluminum Brickledge Offset .................25 Aluminum Drop Outlet..............................................................25 Platinum Series™ Steel Miters & End Caps ...............................26 Platinum Accessories™ Aluminum Miters & End Caps ......... 27-28 Platinum Series™ Steel Gutter Coil ...........................................28 Platinum Accessories™ Aluminum Gutter Coil ...........................29 Platinum Series™ Steel Mini Gutter Coil ....................................29Platinum Accessories™ Aluminum Mini Gutter Coil....................30
Touch-Up PaintPlatinum Series™ Touch-Up Paint Pens & Spray Can .................31 Mountain Cedar® & Northwoods™ Touch-Up Paint Pens ............31 Touch-Up Paint Bottle ..............................................................31
Tools & MachinesPowerpole by Reechcraft™ .......................................................32Seamless Roll Forming Machines ...........................................33
Care & Maintenance ..............................................34
Environmentally Friendly .......................................35
Architectural SpecificationsPlatinum Series™ .................................................................. 5-6Mountain Cedar® & Northwoods Collection™ ........................... 7-8Platinum Accessories™ Aluminum Trim Products .......................9
Soffit & AccessoriesPlatinum Accessories™ Aluminum Soffit Panels ........................12 Platinum Accessories™ Aluminum Soffit Starter Strips ..............12
Fascia & Roof EdgePlatinum Series™ Steel Fascia ..................................................13 Mountain Cedar® Steel Fascia ..................................................13Platinum Series™ Steel Roof Edge ............................................13Mountain Cedar® Steel Roof Edge ............................................13
Steel Siding & AccessoriesPlatinum Series™ Steel Siding Accessories ...............................14 Mountain Cedar® Steel Siding Accessories ...............................14Mill Finish Steel Siding Accessories ........................................15
Steel Shake & Shingle Accent SidingPlatinum Series™ Steel Shake Accent Siding & Accessories ......16Platinum Series™ Steel Shingle Accent Siding & Accessories ....17
Steel Siding CoilPlatinum Series™ Steel Siding Coil ...........................................18 Mountain Cedar® & Northwoods™ Steel Siding Coil...................18
Trim CoilPlatinum Series™ Steel Trim Coil ..............................................19 Mountain Cedar® & Northwoods™ Steel Trim Coil......................19Platinum Accessories™ Aluminum Trim Coil ..............................19
4 | Note: All thicknesses expressed in this product guide are nominal thickness.
Architectural Specifications
Architectural Specifications For:
Platinum Series™ Seamless Steel Siding
Mountain Cedar® Seamless Steel Siding
Northwoods Collection™ Seamless Steel Siding
Platinum Accessories™ Aluminum Trim Products
www.usseamless.com | 5
Characteristics of FinishCeramic Hybrid Product Bulletin
Ceramic hybrid premium coil coating is based on a unique proprietary resin system. Designed as a premium finish to provide outstanding protection from acid rain and corrosive environments. Ceramic hybrid coatings provide excellent color retention and resistance to chalking and fading for a long lasting finish.
Available in a wide variety of colors, ceramic hybrid incorporates high quality exterior grade and durable, color fast ceramic pigments. An efficient custom color matching process provides quick delivery of special colors to meet customer needs.
Ceramic hybrid is designed for application to hot dipped Galvanized, Zinc-Aluminum Alloy Steel (i.e. Zincalume®, Galvalume®) and Aluminum substrates. Ceramic hybrid is a fully warranted coating system designed to be applied as two-coat primer/finish systems by certified applicators. DC401Y55 primer should be utilized to provide exceptional corrosion protection and is more green friendly.
The special Acrylic resin has improved Newtonian flow. Better rheology results in a smoother finish with all roll coating equipment, which provides more consistent color, hide and film build at high line speeds. Our special base resin resists dirt pick up and has a durable stain, chemical and marr resistant surface.
Ceramic hybrid is formulated with Cool Roof pigmentation to meet high and low slope ENERGY STAR specification and is excellent for many building product end uses such as roofing panels, building panels, soffit, roof profiles and other exterior applications that require a high quality long lasting exterior finish.
Scope of WorkUnited States Seamless® will furnish all labor, materials and necessary equipment to complete the installation of United States Seamless® steel siding and accessories and related work on drawings or specifications contained herein.
MaterialsA. Steel siding and accessories shall be made from a nominal thickness of .0171 primed galvanized lock form quality coated steel complying with ASTM A653. Material is designed for markets requiring roll-form ability and as a result, the steel substrate is a low carbon alloy designed to take a 2T bend radius. Chemical and mechanical properties of the steel are detailed in addendum 1. The ASTM standards have been approved for use by government agencies.
B. Siding panels will contain weep holes spaces approximately every 12 3/4” in the leg of the panel bottom to allow condensation and water vapor to be released from the wall. Nailing hem of the panel shall be approximately 3/4” and contain nailing holes uniformly spaced approximately 1/8” from the edge and approximately 1 1/4” on center to provide for expansion and contraction of siding wall.
C. The coating applied to the substrate shall be a roll-coating paint system designed for use with roll-form machinery. Specific data regarding weatherability and other performance specifications are detailed below.
D. United States Seamless® uses domestic steel sources using a minimum of 70% recycled steel.
Typical physical properties of steelTensile 45-60 max KSIYield 33 min KSIElongation 30-35 percent KSI
Chemical composition as detailed by ASTM A653Carbon (max) .015 percentManganese (max) .600 percentPhosphorus (max) .035 percentSulfur .040 percent
(Physical properties can vary from batch to batch, but the above is average expected results.)
Addendum II
SPECIFICATIONS TEST RESULTSASTM D-523
ASTM D-3363
ASTM D-4145
ASTM D-2794
ASTM G-154
ASTM D-2247
ASTM B-117
ASTM D-2244
ASTM D-4214
60° Specular Gloss
Pencil Hardness
Coating Flexibility
Reverse Impact, 60-80 inch pounds
Q.U.V. Weatherometer, 1000 hours
Humidity, 1000 hours at 100°F and 100% Humidity
Salt Spray 1000 hours 5% Salt Solution
45° So. Florida Exposure 40 years, color retention
45° So. Florida Exposure 40 years, chalk resistance
10-80
H - 3H
1 - T to 2 - T
Passes
Passes
Passes
Passes
Passes
Passes
Gardner 60° meter or equivalent
No break in the film
No pick off with Scotch #610 tape
No pick off with Scotch #610 tape
No objectionable chalking per ASTM D-4214, color change per ASTM D-2244 or blistering per ASTM D-714
Less than 5% NO. 8 blisters
Less than 5% No. 6 blisters and Less than 1/8" creep or tape off from the scribe per ASTM D-1654
No objectionable, color change
No objectionable, gloss loss or chalking
Addendum I
Products SpecificationsUnited States Seamless® steel siding and accessory products are produced in a wide range of colors and are manufactured for residential, new construction and commercial exteriors or as replacement siding for existing residential and commercial buildings. With steel siding from United States Seamless® you get the strength of steel and the durability of our exclusive ceramic hybrid paint finish enhanced with DuPont™ Teflon® Surface Protector. Because of it’s toughness and U.V., chemical and heat resistance, it is guaranteed not to rust, crack, blister, chip, peel, flake or fade. All siding panels and accessories are covered by a Limited Lifetime Warranty.
United States Seamless® Platinum Series™ Steel Siding, Steel Shake & Shingle Accent Panel, Fascia & Accessories
Premium Exterior Coil Coating System
6 | www.usseamless.com
United States Seamless, Inc.474 45th Street South, Fargo, ND 58103, 701-241-8888, FAX: 701-232-6666www.usseamless.com • [email protected]
Teflon® is a registered Trademark of E. I. du Pont de Nemours Company and is used under license by United States Seamless®, Inc.
Platinum Series™ finish consists of the following layers permanently adhered to a galvanized steel core. Applied with a unique 10-step thermo bonding coil-coating process.
United States Seamless® introduces its super durable ceramic coil coating finish which provides a new level of long term exterior performance for building product applications. The paint system is formulated with a proprietary super durable polyester resin which provides superior resistance to chalking, fading and environmental weathering. This proprietary system only uses the highest quality of exterior grade and ceramic pigmentation to insure the best available long term high U.V. radiation color and gloss retention with cool roof formulations to meet minimum solar reflectance requirements for Energy Star approval criteria.
The long term exterior weathering performance makes this paint system a cost effective choice for commercial, monumental and residential applications. Ideally used on all building components especially roof and side panels, soffit, fascia, etc. The improved coating hardness and abrasion resistance along with Dupont™ Teflon® Surface Protector for cleanability makes this system a true hybrid.
Available in a wide variety of standard colors. This hybrid custom coating finish is designed for application to primed hot dipped galvanized, zinc-aluminum alloy steel (i.e. Zincalum®, Galvalume®), cold rolled steel and aluminum substrates.
The coating system is a custom warranted coating system designed to be applied as a two-coat primer/finish system. This system imparts exceptional physical properties and corrosion protection. Our backer completes the system and provides excellent "wet stack" corrosion protection and its internal lubricants assist roll forming.
United States Seamless® Platinum Series™ Steel Siding, Steel Shake & Shingle Accent Panel, Fascia & Accessories
Premium Exterior Coil Coating System
Ceramic Hybrid Coating Primary Color
Cool Paint Technology™ Infrared Reflective Pigments
DuPont™ Teflon® Surface Protector
Nylon Fibers
Pretreatment Layer - properly prepares the raw steel to receive the next three layers of finish.
Corrosion-Inhibitive Primer - applied to the solid steel core for corrosion protection.
Water Resistant Backer - applied to the back for added corrosion protection.
Galvanized Coating - Corrosion resistant galvanized steel provides strength and durability.
Solid Steel Core
www.usseamless.com | 7
SPECIFICATIONS TEST RESULTSASTM D-523
ASTM D-3363
ASTM D-4145
ASTM D-2794
ASTM G-154
ASTM D-2247
ASTM B-117
ASTM D-2244
ASTM D-4214
60° Specular Gloss
Pencil Hardness
Coating Flexibility
Reverse Impact, 60-80 inch pounds
Q.U.V. Weatherometer, 1000 hours
Humidity, 1000 hours at 100°F and 100% Humidity
Salt Spray 1000 hours 5% Salt Solution
45° So. Florida Exposure 40 years, color retention
45° So. Florida Exposure 40 years, chalk resistance
10-80
H - 3H
1 - T to 2 - T
Passes
Passes
Passes
Passes
Passes
Passes
Gardner 60° meter or equivalent
No break in the film
No pick off with Scotch #610 tape
No pick off with Scotch #610 tape
No objectionable chalking per ASTM D-4214, color change per ASTM D-2244 or blistering per ASTM D-714
Less than 5% NO. 8 blisters
Less than 5% No. 6 blisters and Less than 1/8" creep or tape off from the scribe per ASTM D-1654
No objectionable, color change
No objectionable, gloss loss or chalking
(Physical properties can vary from batch to batch, but the above is average expected results.)
Addendum II
Addendum ITypical physical properties of steelTensile 45-60 max KSIYield 33 min KSIElongation 30-35 percent KSI
Chemical composition as detailed by ASTM A653Carbon (max) .015 percentManganese (max) .600 percentPhosphorus (max) .035 percentSulfur .040 percent
Characteristics of FinishCeramic Hybrid Product Bulletin
Ceramic hybrid premium coil coating is based on a unique proprietary resin system. Designed as a premium finish to provide outstanding protection from acid rain and corrosive environments. Ceramic hybrid coatings provide excellent color retention and resistance to chalking and fading for a long lasting finish.
Available in a wide variety of colors, ceramic hybrid incorporates high quality exterior grade and durable, color fast ceramic pigments. An efficient custom color matching process provides quick delivery of special colors to meet customer needs.
Ceramic hybrid is designed for application to hot dipped Galvanized, Zinc-Aluminum Alloy Steel (i.e. Zincalume®, Galvalume®) and Aluminum substrates. Ceramic hybrid is a fully warranted coating system designed to be applied as two-coat primer/finish systems by certified applicators. DC401Y55 primer should be utilized to provide exceptional corrosion protection and is more green friendly.
The special Acrylic resin has improved Newtonian flow. Better rheology results in a smoother finish with all roll coating equipment, which provides more consistent color, hide and film build at high line speeds. Our special base resin resists dirt pick up and has a durable stain, chemical and marr resistant surface.
Ceramic hybrid is formulated with Cool Roof pigmentation to meet high and low slope ENERGY STAR specification and is excellent for many building product end uses such as roofing panels, building panels, soffit, roof profiles and other exterior applications that require a high quality long lasting exterior finish.
Scope of WorkUnited States Seamless® will furnish all labor, materials and necessary equipment to complete the installation of United States Seamless® steel siding and accessories and related work on drawings or specifications contained herein.
MaterialsA. Steel siding and accessories shall be made from a nominal thickness of .0171 primed galvanized lock form quality coated steel complying with ASTM A653. Material is designed for markets requiring roll-form ability and as a result, the steel substrate is a low carbon alloy designed to take a 2T bend radius. Chemical and mechanical properties of the steel are detailed in addendum 1. The ASTM standards have been approved for use by government agencies.
B. Siding panels will contain weep holes spaces approximately every 12 3/4” in the leg of the panel bottom to allow condensation and water vapor to be released from the wall. Nailing hem of the panel shall be approximately 3/4” and contain nailing holes uniformly spaced approximately 1/8” from the edge and approximately 1 1/4” on center to provide for expansion and contraction of siding wall.
C. The coating applied to the substrate shall be a roll-coating paint system designed for use with roll-form machinery. Specific data regarding weatherability and other performance specifications are detailed below.
D. United States Seamless® uses domestic steel sources using a minimum of 70% recycled steel.
Products SpecificationsUnited States Seamless® steel siding and accessory products are produced in a wide range of colors and are manufactured for residential, new construction and commercial exteriors or as replacement siding for existing residential and commercial buildings. With steel siding from United States Seamless® you get the strength of steel and the durability of our exclusive ceramic hybrid paint finish enhanced with DuPont™ Teflon® Surface Protector. Because of it’s toughness and U.V., chemical and heat resistance, it is guaranteed not to rust, crack, blister, chip, peel, flake or fade. All siding panels and accessories are covered by a Limited Lifetime Warranty.
United States Seamless® Mountain Cedar® and Northwoods Collection™ Steel Siding, Fascia & Accessories
General Architectural Specifications
8 | www.usseamless.com
Log Siding Backer is manufactured from Expanded Polystyrene (EPS), a common component used in the construction industry. EPS is a rigid closed cell plastic resin made from a petrochemicals derived from crude oil.
Compressive StrengthType 1 EPS has a compressive strength of 10 psi (pounds per square inch), where 10 lbs on one square inch of surface area will result in a 10% deformation of the surface plane.
R-Value At a 75° F test, the Type 1 EPS provides a minimum R-value of 3.60 per inch of thickness.
FlammabilityLike many construction materials, EPS is combustible. It should not be exposed to flame or other ignition sources. All EPS used in the construction industry has a flame retardant that is incorporated into the individual beads during the manufacturing process.
Water Vapor TransmissionType 1 EPS has a perm rating (the measurement of water vapor transmission) of 5.0 perms. EPS is not considered a vapor barrier.
Water AbsorptionIf fully immersed in water, Type 1 EPS will absorb a maximum of 4.0% (by volume). Moisture takes the path of least resistance and travels around individual bead rather than through them; the interconnecting cell structure prevents capillary absorption.
Products PackingThe log siding backer is fabricated to the appropriate profile at 6'0" length and packaged one square (100 sq ft) per poly bag.Other Expanded Polystyrene facts:• EPS does not contain CFC's, HCFC's, or formaldehyde.• EPS does not contribute to the growth of mold or mildew.• EPS is considered to be no more toxic that Douglas Fir wood under the worst case fire scenario.• EPS is manufactured in accordance with ASTM C578.• EPS is recyclable.
Log Siding Backer
Ceramic Hybrid Coating Primary Color
Cool Paint Technology™ Infrared Reflective Pigments
DuPont™ Teflon® Surface Protector
Nylon Fibers
Pretreatment Layer - properly prepares the raw steel to receive the next three layers of finish.
Corrosion-Inhibitive Primer - applied to the solid steel core for corrosion protection.
Water Resistant Backer - applied to the back for added corrosion protection.
Galvanized Coating - Corrosion resistant galvanized steel provides strength and durability.
Solid Steel Core
United States Seamless® Mountain Cedar® and Northwoods Collection™ Steel Siding, Fascia & Accessories
General Architectural Specifications
United States Seamless® introduces its super durable ceramic coil coating finish which provides a new level of long term exterior performance for building product applications. The paint system is formulated with a proprietary super durable polyester resin which provides superior resistance to chalking, fading and environmental weathering. This proprietary system only uses the highest quality of exterior grade and ceramic pigmentation to insure the best available long term high U.V. radiation color and gloss retention with cool roof formulations to meet minimum solar reflectance requirements for ENERGY STAR approval criteria.
The long term exterior weathering performance makes this paint system a cost effective choice for commerical, monumental and residential applications. Ideally used on all building components especially roof and side panels, soffit, fascia, etc. The improved coating hardness and abrasion resistance along with Dupont™ Teflon® Surface Protector for cleanability makes this system a true hybrid.
Available in a wide variety of standard colors. this hybrid custom coating finish is designed for application to primed hot dipped galvanized, zinc-aluminum alloy steel (i.e. Zincalum®, Galvalume®), cold rolled steel and aluminum substrates.
The coating system is a custom warranted coating system designed to be applied as a two-coat primer/finish system. This system imparts exceptional physical properties and corrosion protection. Our backer completes the system and provides excellent "wet stack" corrosion protection and its internal lubricants assist roll forming.
Mountain Cedar® finish and Northwoods Collection™ finish consists of the following layers permanently adhered to a galvanized steel core. Applied with a unique 10-step thermo bonding coil-coating process, Mountain Cedar® and Northwoods Collection™ captures the texture and woodgrain of real cedar.
www.usseamless.com | 9
Log Siding Backer
The Platinum Accessories™ Aluminum trim products finish provides excellent long term gloss retention and corrosion protection in severe environments. Platinum Accessories™ Aluminum products are formulated with a proprietary high durability resin for resistance to chalking and fading and contains high quality exterior grade and ceramic pigmentation to provide superior color stability.
The long term exterior weathering performance makes Platinum Accessories™ your cost effective choice for residential and light commercial applications. Ideal for use on all building components especially soffit and rain carrying systems. The Platinum Accessories™ Aluminum coating features our special stain resistant resin that also improves scratch and metal marking resistance. Platinum Accessories™ Aluminum carries a 35 year warranty.
ASTM D-523 60° Specular Gloss 10-80 Gardner 60° meter or equivalent
ASTM D-3363 Pencil Hardness H - 2H No break in the film
ASTM D-4145 Coating Flexibility 1 - T to 2 - T No pick off with Scotch #610 tape
ASTM D-2794 Reverse Impact, 60-80 inch pounds Passes No pick off with Scotch #610 tape
ASTM G-53 Q.U.V. Weatherometer, 1000 hours PassesNo objectionable chalking per ASTM D-4214, color change
per ASTM D-2244 or blistering per ASTM D-714
ASTM D-2247Humidity, 1000 hours at 100°F
and 100% Humidity Passes Less than 5% NO. 8 blisters
ASTM B-117 Salt Spray 1000 hours 5% Salt Solution PassesLess than 5% No. 6 blisters and less than 1/8" creep
or tape off from the scribe per ASTM D-1654
45° So. Florida Exposure 35 years, color retentionASTM D-2244 Passes No objectionable, color change
ASTM D-421445° So. Florida Exposure 35 years,
chalk resistancePasses No objectionable, gloss loss or chalking
SPECIFICATIONS TEST RESULTS
EMMAQUA Accelerated Weathering 2,000,000 Langleys, Sun 10 Arizona exposure
Passes No objectionable, gloss loss, chalking, color change or blistering
MaterialsPlatinum Accessories™ Aluminum trim products shall be made from 3105 or equivalent aluminum alloy and H-24, H-26 or equivalent hardness. Aluminum is a building product grade, tension leveled coil stock, specifically produced to be roll-formed in a consistent manner. All aluminum used for coating is produced in accordance to the aluminum standards and data 2006 edition. The ASTM standards have been approved for use by government agencies. 16” center vent soffit panels have a minimum calculated ventilated area (NFOA) of 6.60 square inches per lineal foot. 16” full vent soffit panels have a minimum calculated ventilated area (NFOA) of 13.2 square inches per lineal foot.
Characteristics of Platinum Accessories™ Aluminum FinishThe Platinum Accessories™ Aluminum finish applied to the substrate has a dry film thickness of 0.80 - 1.30 mills. Accelerated and physical testing has indicated that this finish meets color, gloss, film thickness, and other specification guidelines as set by the American Society for Testing and Materials, and the National Coil Coaters Association.
Platinum Accessories™ Aluminum trim products are manufactured for residential and light commercial exterior building applications. Products are manufactured in the U.S.A. United States Seamless® uses domestic aluminum sources using 100% recycled aluminum.
Thickness0.019” nominal - soffit & accessories 0.019” nominal - trim coil0.032” nominal - gutter coil
• Meets performance requirements of AAMA 1402-86
United States Seamless® Platinum Accessories™ Aluminum Trim ProductsGeneral Architectural Specifications
Soffit & Accessories
Fascia & Roof Edge
Steel Coil & Accessories
Siding Profiles
Color Palette
Trim Coil
Rainware & Accessories
Product Directory
Product Directory For:
12 | Note: All thicknesses expressed in this product guide are nominal thickness.
Platinum Accessories™ • Aluminum Soffit Panels
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White, Wicker
Soffit & Accessories
16” Solid Soffit Panel.019 thickness
Specifications:12’ in length16” wide192 square ft./ctn.12 pcs./ctn.60 lbs.
Part #:277402
16” Center Vented Soffit Panel(NFOA) 6.6 sq. inches per linear foot.019 thickness
Specifications:12’ in length16” wide192 square ft./ctn.12 pcs./ctn.60 lbs.
Part #:277401
16” Full Vented Soffit Panel(NFOA) 13.2 sq. inches per linear foot.019 thickness
Specifications:12’ in length16” wide192 square ft./ctn.12 pcs./ctn.60 lbs.
Part #:277400
1/2” J ChannelSoffit Starter Strip
Specifications:12’ in length300 linear ft./ctn.25 pcs./ctn.18 lbs.
Part #:277207
F ChannelSoffit Starter Strip
Specifications:12’ in length300 linear ft./ctn.25 pcs./ctn.30 lbs.
Part #:277208
Platinum Accessories™ • Aluminum Soffit Starter Strips
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White, Wicker
www.usseamless.com | 13
Fascia & Roof Edge
Style LL Roof Edge
Specifications:12’ in length240 linear ft./ctn.20 pcs./ctn.75 lbs.
Part #:268414
6” Steel Woodgrain Fascia
Specifications:12’ in length120 linear ft./ctn.10 pcs./ctn.51 lbs.
Part #:267316
8” Steel Woodgrain Fascia
Specifications:12’ in length120 linear ft./ctn.10 pcs./ctn.68 lbs.
Part #:267318
6” Steel Woodgrain Fascia
Specifications:12’ in length120 linear ft./ctn.10 pcs./ctn.51 lbs.
Part #:268316
8” Steel Woodgrain Fascia
Specifications:12’ in length120 linear ft./ctn.10 pcs./ctn.68 lbs.
Part #:268318
Style LL Roof Edge
Specifications:12’ in length240 linear ft./ctn.20 pcs./ctn.75 lbs.
Part #:267414
Mountain Cedar® • Steel Fascia & Roof Edge
Available Colors:Cedar Gray, Dark Natural, Driftwood, Pecan, Redwood, Sahara, White Oak
Platinum Series™ • Steel Fascia & Roof Edge
Special Order Item
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White, Wicker
14 | Note: All thicknesses expressed in this product guide are nominal thickness.
Steel Siding Accessories
Mountain Cedar® • Steel Siding Accessories
Available Colors:Cedar Gray, Dark Natural, Driftwood, Pecan, Redwood, Sahara, White Oak
Sill Trim
Specifications:12’ 6” in length300 linear ft./ctn.24 pcs./ctn.46 lbs.
Part #:268355
Corner Post Cap
Specifications:10’ in length100 linear ft./ctn.10 pcs./ctn.49 lbs.
Part #:268360
3/4” J Channel
Specifications:12’ 6” in length300 linear ft./ctn.24 pcs./ctn.46 lbs.
Part #:268353
1 1/8” J Channel
Specifications:12’ 6” in length300 linear ft./ctn.24 pcs./ctn.52 lbs.
Part #:268354
Platinum Series™ • Steel Siding Accessories
Sill Trim
Specifications:12’ 6” in length300 linear ft./ctn.24 pcs./ctn.46 lbs.
Part #:267355
Corner Post Cap
Specifications:10’ in length100 linear ft./ctn.10 pcs./ctn.49 lbs.
Part #:267360
3/4” J Channel
Specifications:12’ 6” in length300 linear ft./ctn.24 pcs./ctn.46 lbs.
Part #:267353
1 1/8” J Channel
Specifications:12’ 6” in length300 linear ft./ctn.24 pcs./ctn.52 lbs.
Part #:267354
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White,
Wicker
www.usseamless.com | 15
Steel Siding Accessories
Steel Siding Accessories • Starter Strips
Available Colors:Mill Finish
2 1/2” Steel Starter Strip
Specifications:10’ in length2 1/2” in height300 linear ft./ctn.30 pcs./ctn.50 lbs.
Part #:261355
3 1/2" Steel Starter Strip
Specifications:10’ in length3 1/2” in height300 linear ft./ctn.30 pcs./ctn.65 lbs.
Part #:261356
4 1/2" Steel Starter Strip
Specifications:10’ in length4 1/2” in height250 linear ft./ctn.25 pcs./ctn.70 lbs.
Part #:261357
3/4” Narrow Corner Post Base
Specifications:10’ in length100 linear ft./ctn.10 pcs./ctn.44 lbs.
Part #:261358
1 1/8” Wide Corner Post Base
Specifications:10’ in length100 linear ft./ctn.10 pcs./ctn.44 lbs.
Part #:261359
Steel Siding Accessories • Corner Post Bases
Available Colors:Mill Finish
16 | Note: All thicknesses expressed in this product guide are nominal thickness.
Steel Shake Accent Siding & Accessories
Platinum Series™ • Steel Shake Accent Siding Accessories
Available Colors:Autumn Brown, Bronze, Cedar, Khaki, Northwood, Red, Sable, Slate, Wedgewood Blue
1 1/2” J-ChannelSpecifications:12’ 6” in length10 pcs./ctn.30 lbs.
Part #:267954
Platinum Series™ • Steel Shake Accent Siding Fastening Clip
Available Colors:N/A
Clip FastenerSpecifications:75 pcs./ctn.
Part #:26136199
Platinum Series™ • Steel Shake Accent Siding
Available Colors:Autumn Brown, Bronze, Cedar, Khaki, Northwood, Red, Sable, Slate, Wedgewood Blue
Steel Shake12” x 48”
Specifications:12 pcs./ctn.48 sqft./ctn.45 lbs.
Part #:267902
www.usseamless.com | 17
Steel Shingle Accent Siding & Accessories
Platinum Series™ • Steel Shingle Accent Siding Accessories
Available Colors:Autumn Brown, Bronze, Canyon Red, Desert Sand, Evening Gray, Khaki, Northwood, Sage, Slate
3/4” J-ChannelSpecifications:12’ 6” in length300 linear ft./ctn.24 pcs./ctn.46 lbs.
Part #:267353
Platinum Series™ • Steel Shingle Accent Siding Fastening Clip
Available Colors:N/A
Clip Fastener
Specifications:100 pcs./ctn.
Part #:26136099
Platinum Series™ • Steel Shingle Accent Siding
Available Colors:Autumn Brown, Bronze, Canyon Red, Desert Sand, Evening Gray, Khaki, Northwood, Sage, Slate
Steel Shingle12” x 60”
Specifications:10 pcs./ctn.50 sqft./ctn.45 lbs.
Part #:267901
Back of the clip is shown.
18 | Note: All thicknesses expressed in this product guide are nominal thickness.
Steel Siding Coil
Mountain Cedar® and Northwoods Collection™ • Steel Siding Coil
Available Colors:Cedar Gray, Dark Natural, Driftwood, Pecan, Redwood, Sahara, White Oak
Seamless Steel Coil
Specifications:9 5/64” width700 approx. lbs.
Part #:781509070
Seamless Steel Coil
Specifications:10 5/8” width700 approx. lbs.
Part #:781510625
Seamless Steel Coil
Specifications:13 1/4” width700 approx. lbs.
Part #:781513250
Platinum Series™ • Steel Siding Coil
Seamless Steel Coil
Specifications:9 5/64” width700 approx. lbs.
Part #:771509070
Seamless Steel Coil
Specifications:10 5/8” width700 approx. lbs.
Part #:771510625
Seamless Steel Coil
Specifications:13 1/4” width700 approx. lbs.
Part #:771513250
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White, Wicker
www.usseamless.com | 19
Steel Trim Coil
Platinum Accessories™ • Aluminum Trim Coil
Aluminum Trim Coil24” x 50’
Specifications:1 coil/ctn.28 lbs.
Part #:277413
Platinum Series™ • Steel Trim Coil
Steel Trim Coil24.5” x 50’
Specifications:1 coil/ctn.69 lbs.
Part #:267366
Steel Trim Coil13.25” x 50’
Specifications:1 coil/ctn.37 lbs.
Part #:267367
Mountain Cedar® and Northwoods Collection™ • Steel Trim Coil
Available Colors:Cedar Gray, Dark Natural, Driftwood, Pecan, Redwood, Sahara, White Oak
Steel Trim Coil24.5” x 50’
Specifications:1 coil/ctn.69 lbs.
Part #:268366
Steel Trim Coil13.25” x 50’
Specifications:1 coil/ctn.37 lbs.
Part #:268367
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White,
Wicker
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White,
Wicker
20 | Note: All thicknesses expressed in this product guide are nominal thickness.
Profiles
Dutch Lap and Horizontal Siding Profile
Available Collections:Platinum Series™ and Mountain Cedar®
Double, Double Dutch, Colonial Dutch Siding Profile
Available Collections:Platinum Series™ and Mountain Cedar®
103/4”81/16”67/16”
*5/16”
*5/16”
*7/16”
21/2”
81/2”
11/2”
61/2”
11/2”
5”
3”
3”
313/16”
313/16”
51/8”
51/8”
33/4” 51/16”
Dutch Lap 10”
103/4”81/16”67/16”
*5/16”
*5/16”
*7/16”
21/2”
81/2”
11/2”
61/2”
11/2”
5”
103/4”81/16”67/16”
*5/16”
*5/16”
*7/16”
21/2”
81/2”
11/2”
61/2”
11/2”
5”
103/4”81/16”67/16”
*5/16”
*5/16”
*7/16”
21/2”
81/2”
11/2”
61/2”
11/2”
5”
103/4”81/16”67/16”
*5/16”
*5/16”
*7/16”
21/2”
81/2”
11/2”
61/2”
11/2”
5”
103/4”81/16”67/16”
*5/16”
*5/16”
*7/16”
21/2”
81/2”
11/2”
61/2”
11/2”
5”
Dutch Lap 8”Dutch Lap 6” Horizontal 10”Horizontal 8”Horizontal 6”
3”
3”
313/16”
313/16”
51/8”
51/8”
33/4” 51/16”3”
3”
313/16”
313/16”
51/8”
51/8”
33/4” 51/16”3”
3”
313/16”
313/16”
51/8”
51/8”
33/4” 51/16”3”
3”
313/16”
313/16”
51/8”
51/8”
33/4” 51/16”3”
3”
313/16”
313/16”
51/8”
51/8”
33/4” 51/16”3”
3”
313/16”
313/16”
51/8”
51/8”
33/4” 51/16”
Colonial Dutch 5”
Colonial Dutch 4”
Double 5” Dutch
Double 4” Dutch
Double 5”Double 4”Double 3” Double 3”Dutch
3”
3”
313/16”
313/16”
51/8”
51/8”
33/4” 51/16”
3”
3”
313/16”
313/16”
51/8”
51/8”
33/4” 51/16”3”
3”
313/16”
313/16”
51/8”
51/8”
33/4” 51/16”3”
3”
313/16”
313/16”
51/8”
51/8”
33/4” 51/16”
3”
3”
313/16”
313/16”
51/8”
51/8”
33/4” 51/16”
www.usseamless.com | 21
Profiles
Vertical Board & Batten, Inverted Board & Batten, Half Board & Batten Siding Profile
Available Collections:Platinum Series™ and Mountain Cedar®
Full Board & Batten, Beaded Dutch Siding Profiles
Available Collections:Platinum Series™ and Mountain Cedar®
31/2”
31/2”
51/8”
51/8”
313/16”
313/16”
515/16”
21/16”
715/16”
21/16”
63/4”
3/4”
1”
5”
11/2” 11/2”
1”
61/2”
11/2”
1”
81/2”
Vertical Board & Batten 8”
Vertical Board & Batten 10”
Inverted Board& Batten 5”
Half Board & Batten 5”
Half Board & Batten 4”
Full Board Beaded Dutch 6” Beaded Dutch 8” Beaded Dutch 10” & Batten
63/4”
3/4”
1”
5”
11/2” 11/2”
1”
61/2”
11/2”
1”
81/2”63/4”
3/4”
1”
5”
11/2” 11/2”
1”
61/2”
11/2”
1”
81/2”63/4”
3/4”
1”
5”
11/2” 11/2”
1”
61/2”
11/2”
1”
81/2”
22 | Note: All thicknesses expressed in this product guide are nominal thickness.
Profiles
Expanded Polystyrene (EPS) Siding Backer
Log Siding Profile
71/8"
1"
Log Siding Profile
Available Collections:Northwoods Collection™
www.usseamless.com | 23
White Oak Sahara Pecan Driftwood Cedar Gray Redwood Dark Natural
Colors
Available Collections: Platinum Series™, Northwoods Collection™ & Platinum Accessories™
Colors
Available Collections: Mountain Cedar® & Northwoods Collection™
White Shell Sandstone Raffia Beige Desert Sand Birchwood Wicker
Khaki Northwood Slate Bronze Sable Autumn Brown Royal Brown
Cedar Light Blue Wedgewood Blue
Dove Gray Evening Gray Light Yellow Light Green
Sage Grecian Green Red Canyon Red Black
24 | Note: All thicknesses expressed in this product guide are nominal thickness.
Rainware & Accessories
Platinum Series™ • Steel Downspouts & Elbows
3” x 3” Downspouts
Specifications:10’ in length80 linear ft./ctn.8 pcs./ctn.52 lbs.
Part #:267434
3” x 3” Elbows
Specifications:20 pcs./ctn.20 lbs.
Part #:267836
Special Order Items
Platinum Accessories™ • Aluminum Downspouts & Elbows
3” x 3” Downspouts
Specifications:10’ in length80 linear ft./ctn.8 pcs./ctn.24 lbs.
Part #:277434
3” x 3” Elbows
Specifications:20 pcs./ctn.6 lbs.
Part #:277836
2” x 3” Downspouts
Specifications:10’ in length100 linear ft./ctn.10 pcs./ctn.26 lbs.
Part #:277433
2” x 3” ElbowsA: A Style B: B Style
Specifications:20 pcs./ctn.5 lbs.
Part #:A: 277435 B: 277437
3” x 4” Downspouts
Specifications:10’ in length100 linear ft./ctn.10 pcs./ctn.35 lbs.
Part #:277423
3” x 4” ElbowsA: A Style B: B Style
Specifications:20 pcs./ctn.9 lbs.
Part #:A: 277425 B: 277427
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White,
Wicker
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White,
Wicker
www.usseamless.com | 25
Rainware & Accessories
Coil
Aluminum Drop Outlet
Available Colors:Mill Finish
Drop Outlet2” x 3”
Specifications:50 pcs./ctn.4 lbs.
Part #:28003299
Drop Outlet3” x 4”
Specifications:50 pcs./ctn.4 lbs.
Part #:28003298
Platinum Accessories™ • Aluminum Brickledge Offset
Available Colors:Bronze, Khaki, Royal Brown, White
2” x 3” Brickledge Offset
Specifications:2 pcs.12 sets/ctn.5 lbs.
Part #:277436
3” x 3” Brickledge Offset
Specifications:2 pcs.12 sets/ctn.9 lbs.
Part #:277837
3” x 4” Brickledge Offset
Specifications:2 pcs.12 sets/ctn.12 lbs.
Part #:277426
26 | Note: All thicknesses expressed in this product guide are nominal thickness.
ColorsRainware & Accessories
Platinum Series™ • 5" Steel Box Miters & End Caps
Platinum Series™ • 6" Steel Box Miters & End Caps
Available Colors:Primed
Available Colors:Primed
Outside Miters5” K-Style - Box
Specifications:10 pcs./ctn.10 lbs.
Part #:26744021
Outside Miters6” K-Style - Box
Specifications:10 pcs./ctn.12 lbs.
Part #:26744421
Inside Miters5” K-Style - Box
Specifications:10 pcs./ctn.10 lbs.
Part #:26743921
Inside Miters6” K-Style - Box
Specifications:10 pcs./ctn.12 lbs.
Part #:26744321
End Caps5” Left
Specifications:10 pcs./ctn.4 lbs.
Part #:26744221
End Caps6” Left
Specifications:10 pcs./ctn.4 lbs.
Part #:26744621
End Caps5” Right
Specifications:10 pcs./ctn.4 lbs.
Part #:26744121
End Caps6” Right
Specifications:10 pcs./ctn.4 lbs.
Part #:26744521
www.usseamless.com | 27
Rainware & Accessories
Platinum Accessories™ • Aluminum 5” Box Miters & End Caps
Outside Miters5” K-Style - Box
Specifications:10 pcs./ctn.3 lbs.
Part #:277440
Inside Miters5” K-Style - Box
Specifications:10 pcs./ctn.3 lbs.
Part #:277439
End Caps5” Left
Specifications:10 pcs./ctn.1 lbs.
Part #:277442
End Caps5” Right
Specifications:10 pcs./ctn.1 lbs.
Part #:277441
Platinum Accessories™ • Aluminum 6” Box Miters & End Caps
Available Colors:Bronze, Khaki, Royal Brown, White
Outside Miters6” K-Style - Box
Specifications:10 pcs./ctn.3.5 lbs.
Part #:277444
Inside Miters6” K-Style - Box
Specifications:10 pcs./ctn.3.5 lbs.
Part #:277443
End Caps6” Left
Specifications:10 pcs./ctn.1 lbs.
Part #:277446
End Caps6” Right
Specifications:10 pcs./ctn.1 lbs.
Part #:277445
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White,
Wicker
28 | Note: All thicknesses expressed in this product guide are nominal thickness.
Rainware & Accessories
Platinum Accessories™ • Aluminum 5” & 6” Strip Miters
Available Colors:Bronze, Khaki, Royal Brown, White
Outside Miters5” Strip
Specifications:10 pcs./ctn.1.5 lbs.
Part #:277448
Inside Miters5” Strip
Specifications:10 pcs./ctn.1.5 lbs.
Part #:277447
Outside Miters6” Strip
Specifications:10 pcs./ctn.2 lbs.
Part #:277450
Inside Miters6” Strip
Specifications:10 pcs./ctn.2 lbs.
Part #:277449
Platinum Series™ • Steel Gutter Coil
Steel Gutter Coil
Specifications:11 7/8” wide450 approx. lbs.
Part #:771511875
Steel Gutter Coil
Specifications:13 1/4” wide700 approx. lbs.
Part #:771513250
Steel Gutter Coil
Specifications:15” wide700 approx. lbs.
Part #:771515000
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White, Wicker
www.usseamless.com | 29
Rainware & Accessories
Platinum Accessories™ • Aluminum Gutter Coil
Aluminum Gutter Coil
Specifications:11 7/8” wide1 coil350 approx. lbs.
Part #:873211875
Aluminum Gutter Coil
Specifications:13 1/4” wide1 coil400 approx. lbs.
Part #:873213250
Aluminum Gutter Coil
Specifications:15” wide1 coil450 approx. lbs.
Part #:873215000
Platinum Series™ • Steel Mini Gutter Coil
Steel Mini Gutter Coil
Specifications:150’ in length11 7/8” wide1 coil105 approx. lbs.
Part #:267832
Steel Mini Gutter Coil
Specifications:150’ in length15” wide1 coil135 approx. lbs.
Part #:267833
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White,
Wicker
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White,
Wicker
30 | Note: All thicknesses expressed in this product guide are nominal thickness.
Rainware & Accessories
Platinum Accessories™ • Aluminum Mini Gutter Coil
Aluminum Mini Gutter Coil
Specifications:150’ in length11 7/8” wide1 coil65 approx. lbs.
Part #:277832
Aluminum Mini Gutter Coil
Specifications:150’ in length13 1/4” wide1 coil75 approx. lbs.
Part #:277834
Aluminum Mini Gutter Coil
Specifications:150’ in length15” wide1 coil85 approx. lbs.
Part #:277831
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White,
Wicker
www.usseamless.com | 31
Touch-Up Paint
Mountain Cedar® & Northwoods Collection™ • Touch-Up Paint Pens
Available Colors:Cedar Gray, Dark Natural, Driftwood, Pecan, Redwood, Sahara, White Oak
Touch-Up Paint Bottle
Touch-Up Paint PenTop
Specifications:1 each - pen style
Part #:280093T
Touch-Up Paint PenBase
Specifications:1 each - pen style
Part #:280093
Platinum Series™ & Northwoods Collection™ • Touch-Up Paint Pens & Spray Can
Touch-Up Paint Bottle
Specifications:1 each
Part #:280091
Touch-Up Paint Pen
Specifications:1 each - pen style
Part #:280036
Touch-Up Paint Spray Can
Specifications:12 oz. spray can
Part #:280094
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White,
Wicker
Available Colors:Autumn Brown, Birchwood, Black, Bronze, Canyon Red, Cedar, Desert Sand, Dove Gray, Evening Gray, Grecian Green, Khaki, Light Blue,
Light Green, Light Yellow, Northwood, Raffia Beige, Red, Royal Brown, Sable, Sage, Sandstone, Shell, Slate, Wedgewood Blue, White,
Wicker
Note: Use the touch-up paint pens for Mountain Cedar®, Platinum Series™ and Northwoods™ products, the spray can for mount blocks, fasteners, end caps and miters and the touch-up bottle for nails and screws.
32 | Note: All thicknesses expressed in this product guide are nominal thickness.
Tools & Machines
24’ PowerPole KitItem# 4022463
(Qty. 2)
AttachmentsPowerPort Item # 4022343Includes: Outrigger Base & V-Brace
PowerLatchItem # 4022005Includes: 2 Connectors & 4 PowerLatches
PowerMidrailItem # 4022030Includes: 4 Midrail Posts
PowerEndrailItem # 4022071Includes: 2 Endrails
Accessories12' Pole Assembly Item # 4022084
Stand-Off AssemblyItem # 4022432
Traveler Bench AssemblyItem # 4022400
6' Pole AssemblyItem # 4022435
Super StandOffItem # 4022178
Traveler Platform AssemblyItem # 4022402
Pole Coupler AssemblyItem # 4022096
Call 1-888-600-6160 to Order
PowerPole® by ReechCraft™
Tools & Machines
SEVERAL PROFILES AVAILABLE
Seamless Roll-Forming Machines
Eagle 5”Seamless K-Style Gutter Machine
Part #:100002
FasciaSeamless Fascia Gutter Machine
Part #:100003
EM 6/8/10Seamless Siding Machine
Part #:300500
LEAFAWAY®
Seamless Gutter Machine
Part #:100006
EM LOG-8Seamless Siding Machine
Part #:6060000
Visit www.eastsidemachine.com for machine specifications and more information.
Care & Maintenance
Care and Maintenance Instructions
The Platinum Series™, Mountain Cedar®, Northwoods Collection™ and Platinum Accessories™ finish is highly resistant to UV rays and most man-made pollutants. In most cases, normal rainfall is sufficient to keep it clean. But if your product should need cleaning, the following procedures are recommended. Particular attention should be given to areas under eaves, porches, awnings and other overhangs that have limited exposure to the Dark Natural washing effect of rainfall.
1. Moderate atmospheric dirt
An occasional washing with clear water using a garden hose and soft-bristled brush is recommended (a long-handled, car washing brush is ideal for this purpose).
2. Heavy industrial atmospheric dirt
Wash in the manner indicated above, but use the following solution: a. 1/3 cup detergent (Tide®, for example) b. 2/3 cup trisodium phosphate (Soilax®, for example) c. 1 gallon water
3. Mildew accumulation
Mildew can collect on surfaces of all types of building products and is often evident on surfaces that have not been properly cared for and maintained. Normally, mildew will appear as black spots. Mildew is easy to remove by using the basic cleaning solution above with the addition of sodium hypochlorite as follows: a. 1/3 cup detergent (Tide®, for example) b. 2/3 cup trisodium phosphate (Soilax®, for example) c. 1 quart sodium hypochlorite 5% solution (Clorox®, for example) d. 3 quarts water
4. Caulking compounds, tar and similar substances -Use mineral spirits in reasonable amounts and apply directly to the foreign substance. Immediately after cleaning, rinse the area thoroughly with water.
CAUTION: Do not exceed the recommended concentrations of cleaners. To do so can cause damage to the Product’s surface. Avoid skin and eye contact with the solution, and in all cases follow manufacturer’s instructions for the use of cleaning compounds and solutions. Avoid use of abrasive-type cleaners and strong solvents. Test any cleaner on an inconspicuous area before applying to major areas. To minimize streaking, always clean from the bottom to the top and follow with a rinsing of clean water. Excessive scrubbing is unnecessary and can be harmful to the products.
PAINTING: As provided in the warranty, painting will void the warranty unless authorized in writing by United States Seamless®, Inc.
Any minor product adjustments should be discussed with your authorized United States Seamless® franchisee who performed the work. These adjustments can best be made by your authorized United States Seamless® franchisee, since he or she is most familiar with your particular installation.
www.usseamless.com | 35
Environmentally Friendly
United States Seamless® Uses The World’s Most Recycled Material
Ninety-five to one hundred percent of steel and aluminum is recycled globally and the life expectancy is far greater for steel and aluminum products compared to most other materials such as vinyl, wood or fiber cement. Steel siding and aluminum soffit and
rain carrying systems are 100% recyclable at the end of a long useful life; and on job-sites, steel and aluminum material waste is easily separated and recyclable. We strive to manufacture products that promote a healthier environment for all. From the stringent eco-guidelines followed by our paint line to our commitment to using recycled steel and aluminum. United States Seamless keeps
moving forward with the environment.
Recycling steel and aluminum on a job-site is also compensated by the value given when recycling in addition, due to the incredible long life and documented durability, steel siding makes an attractive investment not to mention it is aesthetically pleasing. United States Seamless is focused on promoting and supporting our environment in all that we do. We are committed to finding ways that
we can lead the industry in reduced environmental impact.
P.O. Box 2426 • Fargo, North Dakota 58108-2426701-451-5340 • Fax 701-232-6666www.usseamless.comE-Mail: [email protected]