Specialists in suction tables and cartridge dust collectors for thermal cutting since 1981.
Specialists in suction tables and cartridge dust collectors for thermal cutting since 1981
HIGH EFFICIENCY CARTRIDGE DUST COLLECTORSFOR THERMAL CUTTING INSTALLATIONS: PLASMA, OXY AND LASER CUTTING DUST EMISSIONS FILTERING EFFICIENCY COMPACT FEAUTURE AUTOMATIC CLEANINGAlways guaranteed < 8.5 * 10-4 gr/ft. Tests made on working installations showed that those values are even included between 2,12 and 4,25 * 10 -4 gr/ft.
Constant and guaranteed during the whole cartridge life at 99,999% on particles up to 1.97 * 10-5 in. The filtering medias features and building technology together with the really wide filtering surface of each cartridge (226 ft 2) assure in standard models almost a 40% space gain, compared with conventional dust collector having the same capacity. It is performed through compressed air jets acting in countercurrent, automatically activated by the efficient system called Delta P Board. A pressure gauge placed inside the filter surveys the clogging level of the cartridges sending the value to the Delta P board.
Almost unnecessary until the cartridges replacement. Anyway, it is extremely simple and quick, with a great reduction in standstill times (nearly 70% less than traditional dust collectors).
SIDEROS ENGINEERING USA - 265 Eastchester Dr - Suite 133-303 HIGH POINT, NC 27262 U.S.A. Tel.: +1 336-882-4490 Fax: +1 336-882-4491 firstname.lastname@example.org
Made of plain cellulose, Top Grade cartridges are treated in order to combine a structuraly stable filtering substatum with a thin layer of ultrafine fibers which are able to block submicron particles on the medias outer surface. Average cartridge lifespan: about 4.000 workhours. FILTERING SURFACE (ft2) 452 904 1,356 2,034 2,712 3,616 5,424
MODEL ECO 2C
N OF CARTRIDGES 2 4 6 9 12 16 24
WEIGHT (lb) 710 1100 1450 2900 3300 4000 5250
CAPACITY ft/min 1,100 1,200 1,800 1,800 2,700 2,700 4,000 3,600 5,400 4,700 6,500 6,500
STANDARD PRODUCT RANGE
ECO 4 HC ECO 6 HC ECO 9 CT ECO 12 CT ECO 16 CT ECO 24 CT
Reinforced version of standard dust collectors designed for applications with explosion risk, like aluminium or light alloys cutting.