2257 SeriesSide-Flexing Modular Belts

TM

20+yearsexperience

20 years success in dry running

3150

6.0W

3.00.5

1.0

0.25

R.R.

Pin material: POM (white)Open surface: 29% (straight)Standard length: belt width ≤ 24 inch: 10 ft belt lengthbelt width > 24 inch: 5 ft belt length

Width W

(in.)

Side Flex R. min.

(in.)

Max load capacity Back flex radius

(in.)

WeightLbs/ft2Straight

lb/ftCurve

lbf9.00 17.13

2050 450 0.98 7.75

12.00 22.8315.00 28.5418.00 35.0421.00 40.9524.00 49.21

NG™ evo 2257 Series Side-Flexing Modular Plastic Belts This patent pending side flexing belt features a universal design that enables use in left hand, right hand and “S” turns – all with the same product. This allows for ease of selection and minimal inventory requirements. Efficient transport of individual or packaged products throughout curved conveyor sections is provided while maintaining product orientation, thus reducing the possibilities of product jams or damage while conveying. Its modular width design and various clip retention methods also create design flexibility for a multitude of food, beverage or unit material handing applications. This 2257 series belt also features our innovative NG evo belt material. This is an advanced low-friction resin that greatly reduces the coefficient of friction and provides a sustainable advantage over “industry standard” materials. Designed for “dry running”, its improved sliding properties enable reduced power consumption, increased wear life, reduced dust generation and the ability to run at higher speeds.

TM

2257 SeriesModular Belts

XPGExtra

Performance

TM

Standard Belt Material:

Optional Belt Material:

Without TAB"C" version

Just a clip for pin retention.

0.5

0.25

Width W (in.)

Item Description Item Number

9.00 NGE2257FT-K900 AA250045212.00 NGE2257FT-K1200 AA250045315.00 NGE2257FT-K1500 AA250045418.00 NGE2257FT-K1800 AA250045521.00 NGE2257FT-K2100 AA250045624.00 NGE2257FT-K2400 AA2500457

With slider shoe "S" version

Attached to the pin retention clip is a slider shoe that can reduce friction and act as a wear part.

.12

0.5

0.25

Width W (in.)

Item Description Item Number

9.00 NGE2257FT-S-K900 AA250046812.00 NGE2257FT-S-K1200 AA250046915.00 NGE2257FT-S-K1500 AA250047018.00 NGE2257FT-S-K1800 AA250047121.00 NGE2257FT-S-K2100 AA250047224.00 NGE2257FT-S-K2400 AA2500473

TM

2257 SeriesModular Belts

.22

.37

0.5

.12

With TAB“T” version

Attached to the pin retention clip is a TAB that holds the belt down in the curves.

Width W (in.)

Item Description Item Number

9.00 NGE2257FT-TAB-K900 AA250046012.00 NGE2257FT-TAB-K1200 AA250046115.00 NGE2257FT-TAB-K1500 AA250046218.00 NGE2257FT-TAB-K1800 AA250046321.00 NGE2257FT-TAB-K2100 AA250046424.00 NGE2257FT-TAB-K2400 AA2500465

.33

.19

.37

.05

.12

With TAB & positioner“TP” version

Attached to the pin retention clip is a TAB-Positioner combination that holds the belt down in the curves but also guides the belt on straight sections.

Width W (in.)

Item Description Item Number

9.00 NGE2257FT-TP-K900 AA250047612.00 NGE2257FT-TP-K1200 AA250047715.00 NGE2257FT-TP-K1500 AA250047818.00 NGE2257FT-TP-K1800 AA250047921.00 NGE2257FT-TP-K2100 AA250048024.00 NGE2257FT-TP-K2400 AA2500481

.71

.50

1.33

.53

.38

.56

.41

MBG GuideNolu-S insert and aluminum guide.

Length(ft.) Item Description10 VG-MBG-50-NS-10

.561.0

.48.70

SSUT Side GuideSelf lubricating Nolu-S UHMW insert and stainless steel sheath, 14 gauge.

Length(ft.) Belt Thickness Item Description10 1/2” VG-SSUT-1.00-S-10

1.0.41

.81

.13

.50

.44

.71

.50

1.031.25

.87

.38

SBG Side GuidesUHMW insert and aluminum guide.

Length(ft.) Item Description10 VG-SBG-50-10

Length(ft.) Item Description10 VG-BWS-125-10

Wear tracks are available per application. Please contact Application Engineering for assistance.

Wear tracks are available per application. Please contact Application Engineering for assistance.

Machined drive sprockets - Split - Fixed

ZØ 1” Ø 1.25” Ø 1.5”

Item Description Item Description Item Description10 2256-10R1-DMS-SS 2256-10R1.25-DMS-SS -12 2256-12R1-DMS-SS 2256-12R1.25-DMS-SS 2256-12R1.5-DMS-SS15 2256-15R1-DMS-SS 2256-15R1.25-DMS-SS 2256-15R1.5-DMS-SS18 2256-18R1-DMS-SS 2256-18R1.25-DMS-SS 2256-18R1.5-DMS-SS

Machined return sprockets - Split

ZØ 1” Ø 1.25” Ø 1.5”

Item Description Item Description Item Description10 2256-10R1-RMS 2256-10R1.25-RMS -12 2256-12R1-RMS 2256-12R1.25-RMS 2256-12R1.5-RMS15 2256-15R1-RMS 2256-15R1.25-RMS 2256-15R1.5-RMS18 2256-18R1-RMS 2256-18R1.25-RMS 2256-18R1.5-RMS

ZØ P(in.)

Ø OD (in.)

M(in.)

S(in.)

10 3.24 3.28 2.57 1.3012 3.86 3.94 3.23 1.6115 4.81 4.89 4.19 2.0918 5.76 5.82 5.08 2.56

S+

1+

0

Ø P Ø O

D

0.73

M

DF

Machined Sprockets

Material: polyamide, stainless steel screws, zinc plated steel nuts.

Regal Power Transmission Solutions7120 New Buffington RoadFlorence, KY 41042Customer Service: 800-626-2120Fax: 800-262-3292Technical Service: 800-626-2093

www.RegalPTS.com

APPLICATION CONSIDERATIONS

The proper selection and application of power transmission products and components, including the related area of product safety, is the respon-sibility of the customer. Operating and performance requirements and potential associated issues will vary appreciably depending upon the use and application of such products and components. The scope of the technical and application information included in this publication is necessarily limited. Unusual operating environments and conditions, lubrication requirements, loading supports, and other factors can materially affect the application and operating results of the products and components and the customer should carefully review its requirements. Any technical advice or review furnished by Regal-Beloit America, Inc. and its affiliates with respect to the use of products and components is given in good faith and without charge, and Regal assumes no obligation or liability for the advice given, or results obtained, all such advice and review being given and accepted at customer’s risk.

For a copy of our Standard Terms and Conditions of Sale, Disclaimers of Warranty, Limitation of Liability and Remedy, please contact Customer Servi-ce at 1-800-626-2120. These terms and conditions of sale, disclaimers and limitations of liability apply to any person who may buy, acquire or use a Regal Beloit America Inc. product referred to herein, including any person who buys from a licensed distributor of these branded products.

Regal, NG, and System Plast are trademarks of Regal-Beloit Corporation or one of its affiliated companies.©2015 Regal-Beloit Corporation, All Rights Reserved. MCB15006E • Form# 9866E • Printed in USA