Embed Size (px)
Citation preview
Siddaganga Institute of Technology, Tumkur 572103
(An autonomous institute,Affiliated to VTU Belgum, Approved by AICTE, Programmes Accredited by NBA)
Department of Industrial Engineering and Management
Dr.Rajeshwar.S.Kadadevaramath
Professor [email protected],[email protected]
Phone: +919742693869,+918162214045
+919742693869,+918162214045
Educational Qualification
Ph.D, from Anna University (PSG Tech, Coimabattore) Chennai.
M.E. (BEC Bagalkot) from KarnatakaUniversity, Dharwad.
B.E.(BVB Hubli) from Karnataka University, Dharwad.
Teaching Experience
Sl. No
Position Name of the college Period No. of year Experience
3. Lecture Siddaganga Institute of Technology, Tumkur
1.7.1987 – 14.12.1989 1 – years 08–Months
4. Lecture Siddaganga Institute of Technology, Tumkur
19.8.1991 – 18.9.1999 08-Years
5. Senior Lecturer Siddaganga Institute of Technology, Tumkur
19.9.1999 – 6.03.2005 04-Years
7. Assistant Professor
Siddaganga Institute of Technology, Tumkur
7.3.2005 – 22.3.2009 04-Years
8. Professor Siddaganga Institute of Technology, Tumkur
27.02.2009 – Till date 08-Years
Total 26 Years
Subject Taught
1 .Elements Of Mechanical Engineering( MES) 12. Database Management System(DBMS)
2 .Engineering Drawing 13 .Marketing Management
3. Numerical Methods & Fortran IV 14 .Operations Management
4. Fluid Mechanics And Power Plant Engg 15 .Software Engineering And Management
5 .Manufacturing Process I 16 .Quality Assurance
6 .Manufacturing Process II 17. Management Information System (MIS)
7 .Manufacturing Process II 18. Enterprise Resource Planning(ERP)
8 .Industrial Engineering I 19 .Supply Chain Management(SCM)
9 .Industrial Engineering II 20. Non Traditional Machining Process(NTM)
10 .Engg Economics& Marketing Management 21 .Principles Of Management
11. Engg Management And Entrepreneurship 22 .Entrepreneurship Development
23 Rapid Prototyping(RP)
Research Topic:
Application of PSO algorithm in supply chain network optimization
Area of Interests / Research
1. Interest/Research1:IndustrialEngineeringAndManagement
2. Interest/Research1:SupplyChainManagement
3. Interest/Research1:EvolutionaryAlgorithm&Optimization
Administrative Posts Held
1. Head of the Department of Industrial Engineering and Management 2010-2013.
2. Chairman BOS in Industrial Engineering and Management from 2010 -2012.
RESEARCH GUIDANCE: PHD / MSC ENGG BY RESEARCH AT DI FFERENT UNIVERSITIES:
SI
No.
Name and address
Research scholar
PhD / MSc by Researc
h
Date of Registration
Name of University
Research
Topic/Area
Status
1 Boby John.
( 1SI11PMM01)
Technical Officer. SQC & OR Unit, Indian Statistical Institute. 8th Mile, Mysore Road, Bangalore - 560 059.
PhD 01-05-2011 VTU Belgaum
Software relibilty Completed Pre PhD Vivavoci
on 4/11/14
2 Srinivasan
( 1SI11PMN02) Dept on Mech Engg, B S Abdur Rahman University, Chennai, Tamil Nadu
PhD Jan 2011 VTU Belgaum
Machinabilty studies of Aluminum based composites
Completed Course work
3 Mohan R Sangli ( ISI11MMM02) Vice President Data Entity Bnaglore
M Sc (Engg) by Research
01-05-2011 VTU Belgaum
ERP Applications for SME
Awarded May 2015
4 Dushyanth kumar, ( (1SI10PMN02)Mechanical Engg Dept MCE Hassan
PhD 01-11- 2010 VTU Belgaum
Application of lean Mfg in SCM
Completed PrePhD Vivavoci
5 Smt Latha Shankar, IEM,SIT
PhD 25-06-2009 Kuvempu Supply chain Management
Awarded Feb 2014
6 Dr Sathish Patil,
(2010HSMV002)
SIT Health Canter
M Phil 01-07-2010 BIT Pilani Rajasthan
Hospital Administarion Management
Awarded 2013
7 CP Lohith, Asst Professor Mechanical Engg Dept SIT Tumkur
Guide: Prof R Srinivasan
PhD 31.07.2013 IISC Bangalore
Management Studies Awarded in May 2017
8 Mohan R Sangli ( ISI16PMJ03) Vice President Data Entity Bnaglore
PhD 21-11-2015 VTU Belgaum
Business Modelling And Analytics
Course work
AWARDS /APPRECIATIONS:
Sl No. Name of the Awards /Appreciations Organization – Awarded by
1. Outstanding-One of top 100 Educators in the world-2014-International Biographical center Great Britain, Cambridge, England.
2 Leading engineers of the world-2015-Research and editorial department of the International Biographical center Great Britain, Cambridge, England
3. Appreciation awarded- Who’s Who in the world -2015-Publisher of Who’s Who in America-USA
4. Appreciation- Recognition Citation(Member of the organizing committee54th National Convention and International Conference on Tuesday the 30th October 2012)Indian Institute of Industrial Engineering (IIIE) Chapter Bangalore.
5. Appreciation Award-2013 Industry Institute Interactions by QC circle, Bangalore and Fitwell tools, Tumkur.
6. Certificate Excellance-2010 Indian Institute of Industrial Engineering (IIIE) Chapter Bangalore.
7. Certificate of appreciation -2013 Organizing kaizen workshop for industries in collaboration with Fitwel Tools And Forgings Pvt Ltd Tumkur
Editorial Board Member of Journals
• Editor , International Journal of Business and Systems Research (IJBSR), 2009-12 present, http://www.inderscience.com/ijbsr
• Editorial Board Member , International Journal of Revenue Management (IJRM), 2007-08 present, http://www.inderscience.com/ijrm
• Editorial Board Member , Journal of Industrial Engineering and Management (International)
OMICS Publishing Group 5716 Corsa Ave, Suite 110,Westlake, Los Angeles, , USA
• Editorial Board Member , International Journal Of Advanced Research In Management Engineering And Technology, 2017-18 (IJARMET) present, http://www.ijarmet.in/
JOURNALS PUBLISHED AS GUEST EDITOR/ BOOKS : 1 Lead Guest Editor Special Issue On : Advances In Engineering Management Vol 7,No2,2013 In
International Journal Of Business Systems And Systems Research Inderscience Publications Enterprises Ltd ,UK
2 Lead Guest Editor Special Issue On : Evidence Based Management (special issue under review and in press) In International Journal Of Business Systems And Systems Research Inderscience Publications Enterprises Ltd ,UK
3 Lead Guest Editor Special Issue On : Applications Of Evolutionary Computation, Swarm Intelligence And Decision Support For Sustainability Management in Industrial Engineering and Operations Management (Special issue called for the papers ) Industrial Engineering and Management OMICS Publishing Group USA
4 Lead Guest Editor Special Issue On : “Applications of meta heuristics and arterial intelligence in operations and supply chain management (Special issue called for the papers ) Science Publishing Group USA
5 Book chapter : Achieving Alignment in Production and logistic Operations in three echelon Supply chain Network through new heuristic Optimizer, 2010, , PP. 278-303 Title of the book: Enterprise information systems and implementing IT Infrastructures, Challenges and issues
6 Book :Practical Application of PSO in Supply Chain Network Optimization (Book under review and in press) Lap Lambert Academic Publishing Heinrich-Böcking-Str. 6-8, 66121, Saarbrücken, Germany
PROFESSIONAL BODY MEMEBRSHIP : 1 Fellow , Indian Institute of Engineers(INDIA) ,
2 Representative Institutional Member- Indian Institution Of Industrial Engineering , Navi Mumbai
3 Representative Institutional Member - Indian Institute of Materials Management , Navi Mumbai
4 Life Member- Indian Society For Technical Education-New Delhi
5 Co-Opted Member- Indian Institution Of Industrial Engineering Bangalore Chapter 2013-14
ORGANIZING COMMITTEE MEMBER /TECHNICAL PROGRAMME COMMITTEE MEMBER FOR NATIONAL /INTERNATIONAL CONFER ENCES. 1 Organizing Committee Member : International Conference on signal processing communication
and computational research (ICSPCCR-2016) organized by Vidya Vikas Institute of Engg and Tech. Mysore 12-13th May 2016
2 Technical Programme Committee Member from India for : International Conference on Logistics and Supply Chain Management (LSCM 2015) November 20-22, 2015 Guilin, China
3 Technical Programme Committee Member from India for : International Conference on applied science and technology (ICAST 2015) December19-20, 2015 Sanya, China
4 Advisory Committee Member National Conference on Emerging Trends in Engineering Management, JSS Academy of Technical Education Bangalore INDIA 2013 & 2014
5 Organizing Committee Member International Conference on international Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences 18-19 Nov 2010[AMMMT – 2010] SIT, TUMKUR, India
6 Organizing Committee Member Int. Conf. on Advanced Materials, Manufacturing, Management & Thermal Sciences-2013, May 03-04 ,2013 ,SIT, TUMKUR, India
7 Organizing Committee Member International conference on QUALITY AND RELIABILTY 20 - 22 December 20 - 22 December 2011 BANGALORE INDIA
8 Organizing Committee Member :Indian Institution Of Industrial Engineering 54th National Convention And International Conference Paradigms For Global Challenges And Opportunities: Vision – 2025, 29-31 October 2012,Bangalore
Journal Papers:
1. Rajeshwar.S. Kadadevaramath, K.M.Mohanasudaram “Multi-Objective Trade-off Analysis: State of art: Methods, Applications, and future Research Directions” in Production and Operations Management, 2007, Vol.2, No.4, PP. 70-78.,The International Journal Manufacturing Engineering
2. Rajeshwar.S. Kadadevaramath, Mohanasudaram K.M., Rameshkumar K., B.Chandrasekar “Multi Echelon Supply Chain Optimization Using Particle Swarm Intelligence Algorithm” 2007, Vol.8, No.2-4, PP. 199-21, International Journal of Manufacturing science and Production.
3. Rajeshwar.S. Kadadevaramath, Mohanasudaram K.M. “Lead Time Analysis Of Linear Supply Chain”, 2007, Vol.1, No.1, PP. 98-115, International e-Journal of Logistics and Supply Chain Management (IJLSCM) PSG Tech , Coimbatore INDIA
4. Rajeshwar.S. Kadadevaramath, Mohanasudaram K.M. “An overview of Evolutionary Multi-criteria Analysis: Applications in Management of Operations in Supply Chain” 2007, Vol.4, No.3, PP. 7-19. The ICFAI Journal of Supply Chain Management (National journal)
5. Rajeshwar.S. Kadadevaramath, Mohanasudaram K.M. “Evolutionary Multi-objective Decision Making in Supply Chain Revenue Management” A Literature Review, 2008, Vol.2, No.2, PP. 137-179. (Scopus Indexed) International Journal of Revenue Management (IJRM) Special Issue on: "Revenue Management in Practice: The Execution of Optimal Solutions" Inderscience Publications Enterprises Ltd, UK
6. Rajeshwar.Kadadevaramath, Mohanasudaram K.M., P.S.Sarath Chandra, Rameshkumar K.”Optimizing Manufacturing and Supply Chain Operations in Logistics Management”, 2008, Vol.5, No.1, PP. 54-68. The ICFAI Journal of Supply Chain Management (National journal)INDIA
7. Rajeshwar S. Kadadevaramath, Mohanasudaram K.M., Rameshkumar K., Latha Shankar B. “Supply chain network modeling and optimization using swarm intelligence” 2008, Vol.7, No.5, PP. 3-9. Journal of Manufacturing Technology Today (National journal) INDIA
8. Rajeshwar S. Kadadevaramath, Mohanasudaram K.M., Rameshkumar K., Prasad P.S.S., Chandrasekar B. “Strategic Level Production and Distribution Scheduling Optimization of Three Echelon Supply Chain Structure”, 2008, Vol.4 No.3, PP. 37-46,National journal of technology PSG TEC, INDIA
9. Rajeshwar Kadadevaramath, Edinbarough A. Immanuel, Mohanasundaram K.M, “Synchronized production planning & scheduling in supply chain network through new heuristic optimizer” – PSO 2008, Vol.3, No.1, PP. 18-23, International journal of Manufacturing Engineering
10. Rajeshwar S. Kadadevaramath, Edinbarough A. Immanuel, Mohanasundaram K.M., Prasad P.S.S., Rameshkumar K, “Profit optimization in three echelon supply chain revenue management through new heuristic optimizer” 2009, Vol.3, No.1, PP. 79 -101.(Scopus Indexed), International journal on Revenue management (IJRM) Inderscience Publications Enterprises Ltd ,UK.
11. Rajeshwar S Kadadevaramath,“Performance analysis of multi-echelon supply chain network through new DSS optimizer”, 2009, Vol.36, PP. 233-245,(Scopus Indexed),International journal Computer Applications in Technology (IJCAT) Inderscience Publications Enterprises Ltd ,UK.
12. Rajeshwar S Kadadevaramath, Mohanasudaram K.M., Rameshkumar K., Chandrashekhar B, “Production and distribution scheduling of supply chain structure using intelligent particle swarm optimization algorithm”,2009, Vol.6, PP. 249-268. (Scopus Indexed), International journal Intelligent Technologies and Applications. (IJITA) Inderscience Publications Enterprises Ltd ,UK.
13. Rajeshwar S Kadadevaramath, Mohanasudaram K.M., Gunasekar. “ Performance Evaluation of Serial Supply Chains for Multi products in Multi stage supply chains” 2009, Vol.5, No.1&2, PP.48-55. International journal of Manufacturing technology & research BITS RANCHI
14. Rajeshwar S. Kadadevaramath, Jason C.H. Chen, K. M. Mohanasudaram, “Achieving Alignment in Production and logistic Operations in three echelon Supply chain Network through new heuristic Optimizer”, 2010, Book chapter, PP. 278-303, Enterprise information systems and implementing IT Infrastructures, Challenges and issues
15. Rajeshwar S. Kadadevaramath, Latha Shankar B., Basavarajappa S, Jason C.H.Chen. “Supply Chain Network Optimization Using New Hybrid,PSO Optimizer” 2011, Vol. X , No.1, PP. 44-48. International journal of Manufacturing Engineering
16. Dayanand Mallapur, K.Rajendra Udupa, S.A.Kori, Rajeshwar S Kadadevaramath, “Influence of Grain Refining And Modification On Microstructure And Mechanical Properties Of Cast And Forged A356 ALLOY” –A Comparative Study, 2011, Vol. X , No. 4, PP 21-25,International Journal Of Manufacturing & Industrial Engineering
17. Latha Shankar B, Rajeshwar S Kadadevaramath, Basavarajappa S. “A Stochastic Model For Inventory Cost Calculation With Fuzzy Demand” 2011, Vol. 10, No. 10, PP 23-30. Journal Of Manufacturing Technology Today(MTT) (National journal)
18. Rajeshwar S. Kadadevaramath , Jason C.H.Chen , Latha Shankar B., Rameshkumar K. “Application of particle swarm intelligence algorithms in supply chain network architecture optimization” 2012, Vol.39, PP. 10160–10176,(SCI Imp Factor 5yrs Avg 2.254 & Scopus Indexed) Expert Systems with Applications Science Direct Elsevier
19. Latha Shankar B, Basavarajappa S, Rajeshwar S. Kadadevaramath, Jason C.H.Chen, “Bi-objective optimization of distribution scheduling using MOPSO optimizer” 2012, Vol. 7,
20. Latha Shankar B., Basavarajappa S., Rajeshwar S. Kadadevaramath, Jason C.H.Chen, “Location and allocation decisions for multi-echelon supply chain network –A multi-objective evolutionary approach”, 2013, Vol. 40, PP. 551–562,(SCI Imp Factor 5yrs Avg 2.254 & Scopus Indexed),Expert Systems with Applications Science Direct Publications
21. Latha Shankar B., Basavarajappa S., Rajeshwar S. Kadadevaramath, Jason C.H.Chen, “A bi-objective optimization of supply chain design and distribution operations using non-dominated sorting algorithm”, A case study, 2013, Vol. 40, PP. 5730-5739,(SCI Imp Factor 5yrs Avg 2.254 & Scopus Indexed), Expert Systems with Applications- An International Journal, Science Direct( Elsewear) Publications
22. Latha Shankar B., Basavarajappa S., Rajeshwar S. Kadadevaramath, Jason C.H.Chen, “Constrained optimization of distribution network using new hybrid PSO optimiser” 2013, Vol.7, No.2, PP. 105-120. (Scopus Indexed), Int. J. Business and Systems Research, Inderscience Publications Enterprises Ltd ,UK
23. K.R.Dushyanth Kumar, Rajeshwar S. Kadadevaramath, Edinbarough A. Immanuel, “Effective product efficiency using advanced manufacturing techniques”, 2013, Vol.7, No. 2, PP. 121-124. (Scopus Indexed) Int. J. Business and Systems Research, Inderscience Publications Enterprises Ltd ,UK
24. Rajeshwar S. Kadadevaramath, “Optimization Solution to Supply Chain Network Architecture using new PSO Algorithm” 2013, Vol.2, No.3, PP. 1-3. (Scopus Indexed), Industrial Engineering and Management
25. K.R.Dushyanth Kumar, G.S. Shivashankar, Rajeshwar S. Kadadevaramath, “Complete evolution and Success Factor of Lean Manufacturing” 2013, Vol.1, No.1, PP. 24-28. International journal of theoretical Research and Letters
26. Boby John, R S Kadadevaramath, “A methodology for achieving design review defect density goals in software development process”, 2014, Vol. 2, No.1,PP. 181 – 191, © Delton Books http://www.deltonbooks.com, International Journal of Manufacturing, Industrial and Management Engineering
27. Gunti Ranga Srinivas, Anindya Deb, Malhar N. Kumar, Yathin Chandre Gowda, R S Kadadevaramath .“A study on polyethylene stresses in fixed-bearing total knee arthroplasty with and without inferior surface porosity” 2014, Vol. 2, No.1, pp.151-158, © Delton Books http://www.deltonbooks.com.International Journal of Manufacturing, Industrial & Management Engineering.
28. Gunti Ranga Srinivas,Sachin Phalaksha, Anindya Deb, R S Kadadevaramath, “DOE Based Multidisciplinary Design Optimization of a Vehicle Frontal Structure”, 2014, Vol.2, No.1, pp.87-94© Delton Books http://www.deltonbooks.com, International Journal of Manufacturing, Industrial & Management Engineering. Inderscience Publications Enterprises Ltd ,UK
29. Rajeshwar S Kadadevaramath, Jason CH Chen,Mohan Sangli1, Rajiv Kumar Raj and HarshaVardhan “A Study on Implementation of IT Tools in SME’S in India” Volume 3 • Issue 4 • pp 1-6.Journal of Industrial Engineering & Management OMICS Publishing Group
30. Rajeshwar S Kadadevaramath, Jason CH, Chen,Mohan Sangli, “Attitude of small and medium enterprises towards implementation and use of information technology in India – an empirical study, Vol.9, No.2, pp.123-137(2015) Indexing at Scopus, Google Scholar etc Int. J. Business and Systems Research, Inderscience Publications Enterprises Ltd ,UK
31. Rajeshwar S. Kadadevaramath, G.V. Prabhushankar, K. Kruthika, Souradeep, Pramanik, “Lean manufacturing system implementation in Indian automotive components manufacturing sector- an empirical study”,Vol.9,No.2, pp.179-194(2015) Indexing at Scopus, Google scholor etc Int. J. Business and systems Research
32. Rajeshwar S. Kadadevaramath, Boby John, “ A methodology for quantitatively managing the bug fixing process using Mahalanobis Taguchi system” (2015) 1081-1090 (2015) Indexing at Scopus,ProQuest, DOAJ, EBSCO and Scimago Management Science letters 5
33. Rajeshwar S. Kadadevaramath, Sachin Srinivasan, Vijay kumar, Suresh kumar P.K, “Optimization of Master Removal Rate and Surface Roughness in Laser Cutting Machine by Taguchi Method”, Vol.4, Issue 6, June 2015, DOI:10.15680/.2015.0406162, (2015) Google Scholar,Scirus, Proquest,Etc IJIRSET
34. Dushyanth Kumar K.R., G.S Shivashankar., Rajeshwar S Kadadevarmath, “Application of value stream mapping in pump assembly process: A case study”, “Volume 4, No.3, pp. 1-11, 162. doi:10.4172/2169-0316.1000162, Dec.2015, Indexed in Scopus /Google Scholar, International Journal of Industrial Engineering and management (IJIEM)
35. R.Srinivasan, Lohith C.P, Rajeshwar S Kadadevaramath, S Shrisha, “Strategic Marketing and Innovation Performance of Indian MSMEs”, Number: CFP15766-USB PICMET ISBN USB: 978-1-890843-32-8, Vol 24th , pp 127-133(2015), Indexing at PubMed (partial), Scopus, EBSCO, Index Copernicus and Google Scholar etc IEEE Catalog (IEEE Explore)
36. R.Srinvasan, Lohith C.P, Rajeshwar S Kadadevaramth, S Shrisha, “Innovation and Marketing Strategy for Medium Enterprises- An Indian Study”, ISSN: 1450-2194, ISBN: 978-9963-711-37-6, Vol 8th,PP 1914-1926 (2015) Indexing at PubMed (partial), Scopus, EBSCO, Index Copernicus and Google Scholar etc (Thomson Reuters): EuroMed Journal of Business Science, Scopus), Journal of Materials Science and Engineering
37. Harishchandra*, R.S. Kadadevaramath, and K.C. Anil. “Effect of tool material on machinability of TiCp reinforced Al-1100 composite” IConAMMA-2016 IOP Publishing IOP Conf. Series: Materials Science and Engineering 149 (2016) 012026 doi:10.1088/1757-899X/149/1/012026(OP Conference Series: Materials Science And Engineering (MSE):Conference Proceedings Citation Index – Science (CPCI-S),Thomson Reuters, Web Of Science, Scopus), Journal of Materials Science and Engineering
38. R.S.Kadadevaramath, M.C.Kotresh, D.Srinivasan, “Effect of Weight Percentage and Cutting Parameter on Surface Finish of SiC Reinforced Aluminium Composite”, IConAMMA-2016 IOP Publishing IOP Conf. Series: Materials Science and Engineering 149 (2016) 012030 doi:10.1088/1757-899X/149/1/012030(OP Conference Series: Materials Science And Engineering (MSE):Conference Proceedings Citation Index – Science (CPCI-S),Thomson Reuters, Web Of Science, Scopus) Journal of Materials Science and Engineering.
39. T.R.Veena, R.S.Kadadevaramath, P.M.Nagaraj, S V Madhusudhan. “Design and Fabrication of Automatic Glass Cutting Machine” IConAMMA-2016 IOP Publishing, IOP Conf. Series: Materials Science and Engineering 149 (2016) 012144 doi:10.1088/1757-899X/149/1/012144(OP Conference Series: Materials Science And Engineering (MSE):Conference Proceedings Citation Index – Science (CPCI-S),Thomson Reuters, Web Of Science, Scopus), Journal of Materials Science and Engineering
40. Rajeshwar SK, Latha Shankar B, Nagaraj PM and Jason CHC, “An PSO Algorithm for Multi Objective Optimization of Multi-Echelon Supply Chain” 2016, 5:2, http://dx.doi.org/10.4172/2169-0316.1000e135, ((Journal Impact Factor 0.403) (Index Copernicus, Google Scholar, Open J Gate,Genamics JournalSeek)) Industrial Engineering & Management
41. Boby John, Rajeshwar S Kadadevaramath, “A methodology for quantitatively managing the coding phase of software development process”, 2016, Vol.5, No.16, pp. 13 – 20 (Google scholar,index Copernicus (international & Impact Factor( ISRA)=3.935) International Journal of Research in Engineering and Technology
42. Boby John1, R. S. Kadadevaramath and Edinbarough A. Immanuel, “Recent Advances in software quality management”: A review, 2016, Vol. 4, No.3, pp. 018-026, ISI (International Scientific Indexing) Impact Factor (IF) = 0.526, Merit Research Journal of Business and Management.
43. K.R Dushyanth Kumar, Dr. G.S Shivashankar and Dr. Rajeshwar S Kadadevarmath, “A review on new strategy developments in SMEs for competitiveness”, Volume 4, No.2, pp. 6-15, (ISSN: 2350-2266), Feb.2016(IJRET is indexed in Google Scholar, Index Copernicus, CiteseerX, getCITED and many more IJRET Impact Factor 3.935, IJRET Impact Factor for 2014-2015 by ISRA 3.935), Merit Research Journal of Environmental Science and Toxicology (MRJES&T).
44. K.R. Dushyanth Kumar, Dr.G.S Shiva Shankar, Rajeshwar S. Kadadevaramutt, “Process Efficiency Improvement in Small Organization through Lean Supply Chain Approach”, Volume 18, Issue 6 .Ver. I (Jun. 2016), PP 61-68, e-ISSN: 2278-487X, p-ISSN. (Indexed in google scholar.J-Gate and NASA) International Journal of Business and Management (IOSR-JBM).
45. K.R Dushyanth Kumar, G.S Shivashankar, Rajeshwar S Kadadevarmutt, “Minimization of work process time using Lean manufacturing tool” Volume 05, Special Issue 16. (Sept. 2016), PP 55-62, eISSN: 2319-1163 | pISSN: 2321-7308( (MRJEST) ( indexed in Directory of Research Journals Indexing’ Eye Source, Google Scholar, J-Gate), International Journal of Research in Engineering and Technology (IJRET).
Conference papers
1. Rajeshwar S. Kadadevaramath, “Design & Development software for maintenance management system”, National Conference on Recent trends in condition monitoring NITTE4,5-March 2002
2. Rajeshwar S. Kadadevaramath, “Role of information technology in SCM”, Industrial engineering students conference, IIT KHARAGPUR15 March 2002
3. Rajeshwar S. Kadadevaramath, “JIT” (Philosophy of seeking excellence) International conference POMS, Sanfrancissco USA4-6 April 2002
4. Rajeshwar S. Kadadevaramath, “E-business is strategic weapon in winning competitive advantage in e- manufacturing”, International conference on e- manufacturing Bhopal, India17-19,Nov. 2002
5. Rajeshwar S. Kadadevaramath, “An introduction to concurrent Engineering” National Seminar On Resent Trends In Production & Industrial Engineering. G.Pulla Reddy Eng College. Kurnool (A.P) 9. Dec, 2002
6. Rajeshwar S. Kadadevaramath, “Bench marking – the supply chain management”, National Seminar on Resent Trends in Production & Industrial engineering. G.Pulla Reddy Eng College. Kurnool (A.P) 9. Dec, 2002
7. RajeshwaS. Kadadevaramath, “E-business in supply chain management” International conference On OR –ICORD, CHENNIA29-30,Dec,2002.
8. Rajeshwar S. Kadadevaramath, “Changing the trends in the Indian manufacturing scenario-traditional to
lean manufacturing”, National conference on Recent trends in Mechanical engineering JNTU college of engg Anathpur21.12.02.
9. Rajeshwar S. Kadadevaramath, “Total quality management” National conference on Recent trends in Mechanical engineering, JNTU college of engg Anathpur ,21.12.02.
10. Rajeshwar S. Kadadevaramath, “Role Of It In Internet Worked E-Business Enterprise” National Conferences On Advances In Manufacturing Technology Palakkad. Kerala15&16 Feb 2003.
11. Rajeshwar S. Kadadevaramath, “Agile manufacturing state of art” National Conferences On Advances In Manufacturing Technology Palakkad. Kerala15&16 Feb 2003.
12. Rajeshwar S. Kadadevaramath, “TQM –a journey towards achieving excellence” International conference – POMS 2003, POM in service economy, savannah, Georgia, USA4-7, April 2003.
13. Rajeshwar S. Kadadevaramath, “Todays winner: ERP& Supply Chain Management - a networked economy”, International conference – POMS 2003 POM in service economy, savannah, Georgia, USA4-7, April 2003
14. Rajeshwar S. Kadadevaramath, “Cryogenic Processing-is an advanced trend in Manufacturing”National Conference on recent developments in Mechanical Engineering, Held at Pathiala, Punjab31st Oct-01 Nov 2003
15. Rajeshwar S. Kadadevaramath, “Enterprise collaboration”, National Conference on Recent trends in Manufacturing, Modeling & Analysis-MMA-2004 Held at St.Joseph College of Engg ,Madras 2 & 3 Feb 2004
16. Rajeshwar S. Kadadevaramath, “Role of JIT in internet worked e-business enterprise” National conferences on advances in manufacturing technology PALAKKAD. KERALA 15&16 Feb 2003
17. Rajeshwar S. Kadadevaramath, “Agile manufacturing state of art”, National conferences on advances in manufacturing technology PALAKKAD. KERALA15&16 Feb 2003
18. Rajeshwar S. Kadadevaramath, “Cryogenic Processing-is an advanced trend in Manufacturing”
19. National Conference on recent developments in Mechanical Engineering Held at Pathiala, Punjab31st Oct-01 Nov 2003
20. Rajeshwar S. Kadadevaramath, “Role of the internet in enterprise collaboration”, National Conference on Recent trends in Manufacturing , Modeling & Analysis-MMA-2004 Held at St. Joseph College of Engg, Channai2 & 3 Feb 2004
21. Rajeshwar S. Kadadevaramath, “E-Commerce Applications In Business operations”, International Conference on supply chain management held at P.S.G. College of Technology- Coimbatore3rd to 5th Aug 2004
22. Rajeshwar S. Kadadevaramath, “MEMS- its applications and challenges”, National Conference on Mechanical Engineering,GCE, Ramnagar11-12 March 2005
23. Rajeshwar S. Kadadevaramath, Mohanasundaram K.M. Shankar T.B.U., Aradya and Lathashankar B., “Lead Time Analysis Of Supply Chain Using Statistical Concepts”, International Conference on logistics and supply chain management August 2-4, 2006 PSG. College of Technology Coimbatore, Tamilnadu, India.
24. Rajeshwar S. Kadadevaramath, Mohanasundaram, “Supply chain network optimization”, National conference, Bannariamman college, satyamangala March27-28,2007
25. 24. Rajeshwar S. Kadadevaramath, UdayaShankar T.B. Aradhya and Latha Shankar B.“A Need Of RFID Technology In Improving Quick Response on E-Supply Chain Management”. International Conference on Advances in Manufacturing, July 27-29, 2006 CIT Coimbatore, Tamilnadu, India
26. Rajeshwar S. Kadadevaramath Gnasekar S.K. Mohanasundaram K.M. “Optimization of Total Supply Chain Cost in a Supply Chain using Genetic Algorithm and Simulated Annealing”, Second National conference on’, Global Technologies in manufacturing and thermal sciences GTMTS-2007, March 29-30,2007, Sethu Institute of Technology Pulloor, Kariapatti, Virudhunagar Tamilnadu India.
27. Rajeshwar S. Kadadevaramath, Chandrasekhar B. and Gandhinathan R. “A Multi Echelon Logistics Optimization Using Swarm Intelligence”,Second National conference on Global Technologies in manufacturing and thermal sciences-GTMTS-2007, March,29-30, Sethu Institute of Technology Pulloor, Kariapatti, Virudhunagar, Tamilnadu India.
28. Rajeshwar S. Kadadevaramath, Chandra Sekhar B, Mohanasudaram K.M., Lathashankar B, Udayashankar Aradya,”Network Optimization Modeling and Analysis of a Production/ Distribution System Using Particle Swarm Optimization”, International Conference on modeling and simulation (Emerging Methods towards Frontier technologies) CITICOMS 2007, 27-29 August, 2007 Coimbatore Institute of Technology, Coimbatore - 641 014, India.
29. Rajeshwar S. Kadadevaramath, Mohanasundaram K.M., Rameshkumar K, Udayashankar Aradhya T.B. and LathashankarB, “Multi Echelon Supply Chain Optimization Using Particle Swarm Intelligence Algorithm”, Fifth Annual International Symposium on Supply Chain Management October17-19, 2007.The Grand Hotel & Suites, Toronto, Ontario, Canada.
30. Rajeshwar Kadadevaramath S. Mohanasundaram K.M., Udayashankar Aradhya, Lathashankar B.“Modeling And Analysis of A Production/Distribution System in Supply Chain”, National Conference on Advances in Materials and Manufacturing Processes, 5-6. October 2007, University BDT College of Engineerin, Davangere-04, Karnataka, India
31. Rajeshwar S. Kadadevaramath Mohanasundaram K.M., Udayashankar T.B., Aradhya, Lathashankar .“Determination of Base Stock Level And Total Supply Chain Cost in a Supply Chain Network”, National Conference on Advances in Materials and Manufacturing Processes, 5-6. October 2007 University BDT College of Engineering, Davangere-04, Karnataka India.
32. Rajeshwar S. Kadadevaramath Mohanasundaram K.M., Udayashankar T.B., Aradhya, Lathashankar B. “Determination of Base Stock Level And Total Supply Chain Cost in a Supply Chain Network”, National Conference on Advances in Materials and Manufacturing Processes, 5-6. October 2007 University BDT College of Engineering, Davangere-04, Karnataka India.
33. Rajeshwar S. Kadadevaramath, Chandra Sekhar B, Mohanasudaram K.M.,Lathashankar B, Udayashankar Aradya, “Network Optimization Analysis of a Manufacturing And Distribution Using Spread Sheet Applications”: A Case Study, Second International Conference Resource Utilization and Intelligent Systems INCRUIS–2008,3-5,January 2008 Kongu Engineering College Perundurai, ErodeTamilnad, India.
34. Rajeshwar S. Kadadevaramath, Gunasekar.S, Mohanasudaram K.M., Udayashankar Aradya T.B., Latha Shankar B. “Measure of performance and Determination of optimal base stock Level for a serial supply chain for a product in multi-products supply chain network”, Fourth International
Conference On “Logistics And Supply Chain Management” ILSCM–2008, August7-9, 2008, PSG College of Technology Coimbatore Tamilnadu, India .
35. Rajeshwar Kadadevaramath S., Sridhar M., Manivannan A.,Mohanasudaram K.M. “Design and Optimization of Network Analysis of A Manufacturing And Distribution using new heuristic optimizer”, Fourth International Conference On Logistics And Supply Chain Management-ILSCM–2008, August7-9, 2008 PSG College of Technology, Coimbatore Tamilnadu, India.
36. Rajeshwar S. Kadadevaramath, Mohanasudaram K.M. “A new heuristic approach to determine optimal flow of goods in a three stage supply chain logistics network”, ISCO-2008-2nd International Conference on intelligent systems and control, Feb1-2, 2008, Karpagam College of Engineering, Coimbatore, Tamilnadu, India
37. Dr Rajeshwar Kadadevaramath B.Latha Shankar& ,S Basavarajappa Jason C.H. Chen, “Study on Three-Echelon Supply Chain network Optimization Using a Hybrid PSO Optimizer”, International Conference On “Operational Excellence For Global Competitiveness” (ICOEGC - 2011) RVCE, Bangalore,03-05 Feb2011
38. Dr Rajeshwar Kadadevaramath B.Latha Shankar& ,S Basavarajappa,Jason C.H. Chen, “Constrained Optimization Of Production Distribution Scheduling Using New Hybrid PSO Optimizer” International Conference on international Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences [AMMMT – 2010] SIT, TUMKUR,18-19 Nov 2010
39. Dr Rajeshwar Kadadevaramath & Dushanthkumar K R., “Achieving productivity Goals through Quality Control Techniniqes”, International Conference on international Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences [AMMMT – 2010] SIT, TUMKUR,18-19 Nov 2011
40. K.R Dushyanth Kumar, Dr. G.S Shivashankar, Dr. Rajeshwar S Kadadevarmutt, “An Overview of Lean Manufacturing and its Tools”,Indian Institution Of Industrial Engineering 54th national convention and international conference paradigms for global challenges and opportunities: vision – 2025, 29-31 October 2012,Bangalore
41. B. Latha Shankar, S Basavarajappa, Rajeshwar S Kadadevaramath, Jason.C.H.Chen, “Bi-objective Optimization of Location-Allocation Decisions for Three-Echelon Supply Chain Architecture using Multi-Objective Hybrid Particle Swarm Optimizer” Indian Institution Of Industrial Engineering 54th national convention and international conferenceparadigms for global challenges and opportunities: vision – 2025, 29-31 October 2012,Bangalore.
42. Rajiv kumar raj, Harsh vardhan, Dr. R.S. Kadadevara math, “Developing An Approach For Use Of Information For Business Growth Through Adoption Of It In Small And Medium Business Enterprises”
43. Int. Conf. on Advanced Materials, Manufacturing, Management & Thermal Sciences-2013, May 03-04 ,SIT, TUMKUR, India
44. K.R Dushyanth Kumar , Dr. G.S Shivashankar , Dr. Rajeshwar S Kadadevarmutt, “Application Of Lean Concepts To Supply Chain Management”: Review Int. Conf. on Advanced Materials, Manufacturing, Management & Thermal Sciences-2013, May 03-04, SIT, TUMKUR, India
45. Immanuel Edinbarough, Mohan Sangli. R.S. Kadadevara Math,“A Literature Review On Need Of Enterprise Solutions In Small And Medium Scale Manufacturing Industries”, Int. Conf. on Advanced Materials, Manufacturing, Management & Thermal Sciences-2013, May 03-04, SIT, TUMKUR, India
46. Dr Rajeshwar Kadadevaramath,Jason C.H. Chen, “Profit maximization of multi-echelon supply chain network architecture using new heuristic approach” National conference organized by IIT Gowahati India on 12th and 13th October 2013, India
47. Dr Rajeshwar.S.Kadadevarmath, Latha Shankar B., Jason C.H. Chen, “Application of swarm intelligence algorithm for multi objective optimization of multi echelon supply chain” International Conference on Applied Business and Economics (ICABE), City University of New York USA, 2nd - 4th October, 2013.
48. Dr Rajeshwar.S.Kadadevarmath, Dushyanth Kumar K. R., Dr. G S ShivaShankar, “Lean supply chain strategies in small and medium enterprises” International Conference on Applied Business and Economics (ICABE), City University of New York USA, 2nd - 4th October, 2013.
49. T. B. U.S. Aradhya, Dr Rajeshwar.S.Kadadevarmath, Nagraj P. M., Vishwas M., Jayasimha S.L.N. “Application of group technology in Automobile component manufacturing company” National conference on manufacturing: Vision for Future (MVF), Indian Institute Of Technology Guwahati, 12th - 13th October, 2013
50. Dr.Rajeshwar S. Kadadevaramath, “Optimization of supply chain network architecture using NLIW-PSO algorithm” International conference organized by Management department of VIT Vellore on 19th and 20th April 2013, India
51. Boby John & R S Kadadevaramath, “A methodology for quantitatively managing the bug fixing process using Mahalanobis Taguchi system”, 2nd International Conference on Robust Quality Engineering (ICRQE), 15 – 17 December, 2014, NIQR, Bangalore
52. Boby John & R S Kadadevaramath, “A methodology to achieve requirement review defect density goals in software development process”, in 2nd International Conference on Business Analytics and Intelligence (ICBAI), 18 – 20 December, 2014, Indian Institute of Science, Bangalore
53. Gunti Ranga Srinivas & Anindya Deb, Malhar N. Kumar, Yathin Chandre Gowda & Dr. Rajeshwar S Kadadevara Math, “A Study On Polyethylene Stresses In Fixed-Bearing Total Knee Arthroplasty With And Without Inferior Surface Porosity”, International Conference On Recent Advances In Engineering Sciences ICRAES -2014, 4-5 SEPT 2014
54. Gunti Ranga Srinivas,Sachin Phalaksha, Dr. Anindya Deb, Dr. R S Kadadevaramath, “DOE Based Multidisciplinary Design Optimization Of A Vehicle Frontal Structure”, International Conference On Recent Advances In Engineering Sciences ICRAES -2014, 4-5 SEPT 2014
55. R Srinivasan, Lohith C P (Indian Institute of Science, India) & Rajeshwar S Kadadevaramth (Siddaganga Institute of Technology, India), “Strategic marketing and innovation performance of organizations : a study on Indian MSMEs”. International conference (NASMI-North American Society for Marketing in India)2014, Great Lakes Institute of Management ,Chennai
56. Lohith C.P R.Srinivasan, , Rajeshwar S Kadadevaramath, S Shrisha, “Strategic marketing and innovation performance of organizations : a study on Indian MSMEs” International conference (NASMI-North American Society for Marketing in India)2014, Great Lakes Institute of Management ,Chennai.(pp 121-128)
57. Lohith C.P R.Srinivasan, , Rajeshwar S Kadadevaramath, S Shrisha, “Impact of Innovation and Strategic Marketing on Indian MSMEs”, IIMB-SJSU-ICL International Conference on Transnational Entrepreneurs and International SMEs in Emerging Economies: Drivers and Strategies held in IIMB, on
21st-22nd May 2015. ISBN 978-93-84743-81-9, pp 672-682
58. Lohith C.P R.Srinivasan, , Rajeshwar S Kadadevaramath, S Shrisha,“Strategic Marketing and Innovation Performance of Indian MSMEs”, PICMET 2015(Portland International Conference on Engineering and Technology Management) held at Portland ,Oregon, USA on 2nd – 6th Aug 2015. Vol 24th , pp 127-133
59. Lohith C.P R.Srinivasan, , Rajeshwar S Kadadevaramath, S Shrisha,“Innovation and Marketing Strategy for Medium Enterprises- An Indian Study”, EUROMED Academy of Business (EMAB) -2015 an International conference held at Verona, Italy on 16th -18th Sept 2015. The paper was published in EUROMED Journal of Business. Vol 8th,pp 1914-1926
60. Sachin Srinivasan, Rajeshwar S Kadadevaramath, “Optimization of Material Removal Rate and Surface Roughness in Laser Cutting Machine by Taguchi Method”, International Conference on Emerging Trends in Engineering and Technology – 21st June 2015 at IFERP Bengaluru.
61. Pramod T R, Rajeshwar S Kadadevaramath, Kiran T S, Suresh kumar P K, “Optimization of Material Removal Rate and Surface Roughness in Wire Electric Discharge Machining by Taguchi Method”Technical paper has been accepted and selected for IRJET-2015 Conference which is going to be held in - NOV 2015.
62. Boby John & R S Kadadevaramath,”A methodology for quantitatively managing the coding phase of software development process”, International Conference on Recent Advances in Engineering Sciences (ICRAES - 2016), 8 - 9 September 2016, MSRIT, Bangalore
63. Boby John & R S Kadadevaramath, “A fuzzy optimization approach for software reliability estimation”International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences (AMMMT-2016), 23 - 24 September 2016, SIT, Tumkur
64. Boby John & R S Kadadevaramath, “A methodology for quantitatively managing agile software projects 3rd International Conference on Robust Quality Engineering (ICRQE), 19 – 21 December, 2016, NIQR, Mumbai, (Received Best paper Award)
65. Dushyanth Kumar K.R., G.S Shivashankar., Rajeshwar S Kadadevarmath, “A review on new strategy developments in SMEs for competitiveness”, Merit Research Journal of Environmental Science and Toxicology (MRJES&T), Volume 4, No.2, pp. 6-15, (ISSN: 2350-2266), Feb.2016.
66. Dushyanth Kumar K.R., G.S Shivashankar., Rajeshwar S Kadadevarmath, “Process Efficiency Improvement in Small Organization through Lean Supply Chain Approach”, International Journal of Business and Management (IOSR-JBM), Volume 18, Issue 6 .Ver. I (Jun. 2016), PP 61-68, e-ISSN: 2278-487X, p-ISSN.
67. Dushyanth Kumar K.R., G.S Shivashankar., Rajeshwar S Kadadevarmath,”Minimization of work process time using Lean manufacturing tool”, International Journal of Research in Engineering and Technology (IJRET), Volume 05, Special Issue 16. (Sept. 2016), PP 55-62, eISSN: 2319-1163 | pISSN: 2321-7308.
68. Harishchandra, Dr. R.S. Kadadevaramath and Anil K.C, “Effect of tool material on machinability of TiCp reinforced Al-1100 composite”, International Conference on Advances in Materials and Manufacturing Applications (IConAMMA) held at Amrita School of Engineering, Kasavanahalli, Carmelaram, Bengaluru,Karnataka-560035 on 14th-16th July 2016. (International journal, Paper ID- IConAMMA_2016_paper_179).
69. T.R.Veena, R.S.Kadadevaramath, P.M.Nagaraj, S V Madhusudhan, “Design and Fabrication of Automatic Glass Cutting Machine”, International Conference on Advances in Materials and Manufacturing Applications (IConAMMA) held at Amrita School of Engineering, Kasavanahalli, Carmelaram, Bengaluru,Karnataka-560035 on 14th-16th July 2016. (International journal, Paper ID- IConAMMA_2016_paper_179).
70. Harishchandra, Dr. R.S. Kadadevaramath and Anil K.C., “Experimental investigation on Surface roughness in dry machining of TiCp reinforced Al-1100 with Different Tool material”, International Conference on Applied Science Engineering and Technology (ICASET-16) held at Sri Sairam College of Engineering (SSCE), Bengaluru, Karnataka on 6th-7th June 2016.
INVITED LECTURE DELIVERED AS RESOURCE PERSON AT OTH ER COLLEGES
SNO TOPIC DATE PLACE
1) Green Supply Chain Management
JULY 2008 AICTE-ISTE Sponsored Short Term Training Programme on “Product Design for Environment”
Amruta School Of Engineering Coimbattore, Tamilnadu
2) PSO APPLICATIONS IN SCM
JAN 2009 AICTE-ISTE Sponsored Short Term Training Programme on “Heauristics In Engineering
Applications ”
Karpagum Of Engineering Coimbattore , Tamilnadu
3) Understanding the Supply Chain
08-08-2011
VTU-EDUSAT,Programme-15,The live classes transmitted through satellite from the VTU Studio
to all colleges affiliated to VTU , DSERT,Campus, 100 ft. Ring Road,
Hosakerehalli, BSK III Stage, Bangalore
4) Supply chain processes 09-08-2011
5) Supply chain performance achieving strategic fit and scope
11-08-2011
6) Supply chain drivers-supply chain performance measure
16-08-2011
7) Supply chain networks 17-10-2011
8) Financial factors 18-10-2011
influencing supply chain decisions
9) Coordination in supply chain
20-10-2011
10)Information technology in supply chain
31-10-2011
11)E Business and supply chain 03-11-2011
12)Dell ,wall mart, LL Bean, Toyota, Nike case studies
08-11-2011
13)Energy Management 24-06-2011 AICTE/ISTE work shop organized by Mech dept SIT Tumkur
14)Industrial safety in organization
25 May 2011 NTTF , SIT Tumkur
15)‘Quantitative Research
Techniques’
29.03.2012 Department of Mechanical Engineering, University B.D.T. College of Engineering, Davangere (A Constituent College of Visvesvaraya Technological University, Belgaum)
16)Optimization using PSO 30-07-2013 Department of Mechanical Engineering, Canara Engineering College ,Mangalore
17)Reviewing and Presenting Literature Review in Research work
25-05-2015 Faculty development programme- Research Methodology-I, Organised by The Department of Industrial Engineering and Management is organizing a Workshop on “Research Methodology-I” in association with Post Graduate Department of Management Studies Of SIT from 25th to 30th May 2015, for faculty members of the various colleges.
18)Data COLLECTION, interview & pilot study
26-05-2015 Faculty development programme- Research Methodology-I,Organised by The Department of Industrial Engineering and Management is organizing a Workshop on “Research Methodology-I” in association with Post Graduate Department of Management Studies Of SIT from 25th to 30th May 2015, for faculty members of the various colleges.
19)Genetic Algorithm and Particle Swarm Optimization (PSO) Algorithm and Its Application in
03-06-2015 AICTE Sponsored Two Week (May25th To June6th 2015) Faculty development programme on “Formulation, Modeling And Practical Applications Of Or” Malnad College Of Engineering, Hassan
Engineering - Optimization
20)Modeling And Analysis Of Multi-Echelon Supply Chain Architectures Using Particle Swarm Optimization Algorithms
04-06-2015 AICTE Sponsored Two Week (May25th To June6th 2015) Faculty development programme on “Formulation, Modeling And Practical Applications Of Or” Malnad College Of Engineering, Hassan
21)Literature Review in Research work
24-06-2015 One week (22th to 27th June 2015)Faculty development programme on “Research Methodology” organized by BMSIT, Bangalore
22)Data Collection, Interview & Pilot Study
25-06-2015 One week (22th to 27th June 2015)Faculty development programme on “Research Methodology” organized by BMSIT, Bangalore
23) Applications of Advanced Manufacturing Processes
15th July 2016 One week (14-19 July 2016,)Faculty development programme on “Advanced Manufacturing Processes” Organsid by dept MED & IEM, SIT Tumkur( state level workshop all engg college faculty )
FACULTY DEVELOPMENT WORKSHOPS ATTENDED (IN HOUSE & O UTSIDE)
Workshop
Topic Period Organized by
1. Professional Development programme for Teachers of SIT
26-08-91 to 31-08-91 College for all staff
2. Engineering Graphics. 07-09-92 to 12.09.92 Mech &IEM
3. Control Engineering 14-06-93 to 19.06.93 Mech &IEM
4. Computer Oriented Numerical Techniques
16-08-93 to 21.08.93 Mech &IEM
5. DOM 17-01-94 to 22.01.94 Mech &IEM
6. Machine Design 02-06-94 to 09.06.94 Mech &IEM
7. Industrial Metrology and Quality Control
01-03-95 to 07.03.95 Mech &IEM
8. CAD/CAM & Robotics 04-09-95 to 09.09.95 Mech &IEM
9. Operations Research 04-03-96 to 09.03.96
10. Thermodynamics and Heat transfer 08-07-96 to 13.07.96 Mech &IEM
11. Production Operation Mngt. 06-01-97 to 11-01-97 IEM
12. Material Science & Metallurgy 03-10-97 to 09.10.97 Mech &IEM
13. Database Management Systems 09-03-98 to 14.03.98 IEM
14. ‘C’ Programming Part – I 17-08-98 to 22.08.98 IEM
15. ‘C’ Programming Part – II 08-02-99 to 13.02.99 IEM
16. CAD 14-9-99 to 19.9.99 Mech &IEM
17. C++ programming 13-04-01 to 16.04.01 Mech &IEM
18. Finite Element Methods 25-2-02 to 2-3-02 Mech &IEM
19. Mechatronics 26-8-02 to 31.8.02 Mech &IEM
20. Total Quality Management 23.2.03 to 28.2.03 IEM
21. One day workshop on TQI for SIT Teachers
24-1-2003 College for all staff
22. Professional Communication 21-8-03 to 27-8-03 College for all staff
23. Nano Technology and Applications 23- 8-04 to 28-8 -2004 Mech &IEM
24. Six sigma Programme & Design of Experiments
27- 2-2005 to 4-3-2005 IEM
25. Mechatronics & MEMS 16-8-2005 to 21-8-2005 Mech &IEM
26. Finite Element Techniques 6-2-2006 to 11-2-2006 Mech &IEM
27. Computer Aided Engineering Drawing 4-8-2006to 12-8-2006 Mech &IEM
28. Instructional Methodology and Pedagogy
29-1-2007 to 3-2-2007 Centralized
29. Academic Autonomy 6-8-2007 to 11-8-2007 Centralized
30. Computer Aided Machine Drawing 29.1.2008 to 2. 2.2008 Mech &IEM
31. CAED, CAMD USING SMART Board & Foundry metallurgy
01.8.2008 to 7.8.2008 Mech &IEM
32. Modeling Simulation & Analysis Using Arena
19.1.2009 to 24.1.2009 IEM
33. Engineering Economics 24-1-2010 to 30.1.2010 IEM
34. Probability & statistics 26.6.2010 to 30.6.2010 IEM
35. Software Applications in Industrial Engineering
20.1.2011 to 27.1.2011 IEM
36.
Rapid Prototyping and Manufacturing Technologies (for faculty and students)
5-12- 2011
IEM&MED
(RAPI-TECH SOLUTIONS Inc . Banglr
37.
Entrepreneurship development ( for 6th sem-all braches)
17-02-2012 Dept of industries and commerce, Govt of Karnataka
38.
Work shop on out come based education (PEO & program outcome –NBA)
3-4,feb -2012 By college for all Professors
39. Training on work study Professional software and Mini Tab software
25th to 30th 2012 IEM
40.
Six Sigma Black Belt July 22nd to 27th, 2013 IEM/INDUSTRIES/OTHER DEPT OF SIT/ COLLEGES
41.
Industry Institute Interaction
1. Workshop on “Improvement Culture building through people involvement”
28th September 2013 IEM faculty and students /Industries/Other Depts Of SIT/ Colleges
42. One day workshop on Innovation, Product Design & Development
21st Feb 2014 IEM (faculty and students )
43.
Training the trainer on intellectual property rights
29th May 2014 By college from WTO & IPR RELAY CELL Banglr
( for all Professors)
44.
Formulation of research & development initiatives for engineering faculty
26&27th June 2014 By college from ESCI Hyderabad
( for all Professors)
45.
Workshop on Research Methodology – I
May 25-30, 2015 Organsid by dept of IEM& MBA SIT Tumkur
46. Data analytics July 17-19,2015 Organsid by dept of
IEM, SIT Tumkur
47. Word class manufacturing systems Nov 23-28,2015 Organsid by dept of
IEM, SIT Tumkur
48. Advanced Manufacturing Processes 14-19 July 2016 Organsid by dept
MED & IEM, SIT
Tumkur
49.
Applications Of Lab View And Solid Modeling Softwares In Mechanical Engg Design
Dec 21st to Dec 25th, 2016 Organsid by dept MED & IEM, SIT Tumkur
50.
Attendee 7 AICTE Sponsored faculty development workshops
2000 to 2005. PES Madya , BEC Bagalkot, BIET Davangere and colleges of Karnataka from
RAJESHWAR .S.KADADEVARAMATH Professor & Co-Ordinator –PG CIM & Research Centre IEM
Department Of Industrial Engineering And Management
Siddaganga Institute Of Technology
( An Autonomous Institute , Affiliated to Vishweswaraya Technological University ) ,
Tumkur - 572103, Karnataka State India **********************************************************************
Department of Industrial Systems Engineering and Management. CHEW Ek Peng. Contact. 6516 6554. [email protected]. Location.E1A – 06 – 06. Department of Industrial Systems Engineering and Management & The Logistics Institute - Asia Pacific. FRESEMichael. Professor (Courtesy appointment). Provost's Chair. FRESE Michael. Contact. 6516 1500. Studies in the Department ofIndustrial Engineering and Management. Bachelor's and Master’s studies. We combine classical industrial engineering, whichemphasizes understanding and developing operational processes and complex systems, with a focus on strategic and entrepreneurialleadership. Department of Industrial Engineering and Management. Doctoral studies at the department. The deparment's research focusareas on strategy and venturing, operations and service management, and entrepreneurial leadership offer our doctoral students a wideselection of research opportunities, paradi
