14 Prices Subject To Change Without Notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.

SHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENTBlowers

300 CFM Blower FanSKU 396540 9999 MSC20300

Heater Attachment for 300 CFM BlowerSKU 396571 4999 MSC20300-HTR • Converts Your 300 CFM

Portable Blower Into a Heater for Your Garage or Work Space

• 1320 Watts, 5000 BTU

1200 CFM Blower Fan14999 SKU 396546 MSC21200

48” Evaporative CoolerSKU 110318 3,99999 CLSCS5-48-2B

Portable Evaporative CoolerSKU 110319 1,19999 CLSCS5-16-2D • Fan 16” Industrial Three-Blade Propeller• Fan Motor – High Efficiency, Totally Enclosed 1/3 HP• 2 – Speed: 2,400 CFM @ .0” S.P. High: 2,100 CFM @

.15” S.P. Low: 1,380 CFM @ .15” S.P.• 2 – Speed Direct Drive: 115 Volt / 1 Ph / High 6.1

Amps / Low 3.4 Amps• Water Supply – Garden Hose Connection or Portable

Supply Tank, Level Regulated by Float Valve• Water Reservoir – Internal 16 Gallon Capacity• Cooling Coverage Area – Approx. 500 Sq/Ft• Low Water Shutoff to Extend Pump Life

Evaporative Coolers

36” Evaporative CoolerSKU 110316 2,69999 CLSCS5-36-VD

CTT-EC Scale Treatment TabletsSKU 110321 3999CLSCS-T101

Refresh Algae Treatment TabletsSKU 110322 3999 CLSCS-T102

Cool-Space Portable Evaporative Coolers Are a Great Solution for Keeping Your Garage Cool Without the High Cost of Conventional Air Conditioning. Simply Plug Into Your Standard Outlet and Add Water.

Zone 11K, 36” Evaporative CoolerSKU 342427 2,19999 PLC6622-0000 • 36” Evaporative Cooler Provides Effective Spot Cooling That

Normally Would Be Too Costly to Cool with Refrigerated Air• Resin Housing, 38 Gallon Reservoir, Automatic Low Water

Pump Shut-off and Integrated Touch Pad Interface with LED Indicators Cooling Area (est): 3000 Sq-Ft

36” Stainless Steel Evaporative CoolerSKU 342429 3,19999 PLC6622-2502 • Stainless Steel Housing, Large Wheels, Hinged Top Cover,

Easy Access and Maintenance; Controls and Valves in Protected Location

• Cooling Area (est): 3000 Sq-Ft

48” Stainless Steel Evaporative CoolerSKU 342430 3,79999 PLC6622-3502 • Stainless Steel Housing, Large Wheels, Hinged Top

Cover, Easy Access and Maintenance; Controls and Valves in Protected Location

• Cooling Area (est): 4000 Sq-Ft

• Great for Use in Shops, Offices, Homes, and Other Locations

• Variable Speed Switch: 900-1500 RPM

• (2) 11 Amp Grounded Receptacles with Over Current Protection

• Great for Larger Jobs and Open Workspaces

• Moves 1,200 CFM of Air Up to 30’ Away• Variable Speed Switch: 900-1500 RPM• (2) 11 Amp Grounded Receptacles with Over Current Protection

TurN Your BloWEr FAN INTo

A HEATEr BY ATTAcHINg THATATTAATTAA cHINg THAT

Evaporative Coolers

15Prices Subject To Change Without Notice.Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.

24” Direct Drive Heavy Duty Tilt FanSKU 110307 17499 VENBF24TFYEL

36” Direct Drive BarrelSKU 110309 31999 VENBF36DDRED

42” Belt Drive Industrial Barrel FanSKU 110310 41999VENBF42BDRED

4000 CFM Carpet FanSKU 110314 33499VENHVCF4000 • Heavy Duty 1 HP Induction

Motor Designed for Extended Use

22” High Velocity Oscillating Pedestal Fan21999 SKU 110312 VENHVPF22OSC • Heavy Duty 3-Speed

Thermally Protected Motor• Fan Head

Oscillates 90°

20” High Velocity Floor FanSKU 110311 7999 VENHVFF20 • Three-Speed

Energy Efficient PSC Motor

Barrel Fans

Fans

SHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENT

Crushproof 2.5"x 11' Flarelock HoseSKU 977557 12999ACSFLT250• Exclusively for Cars and Small Trucks• Each End is Flared to Permit

Connection of Two or More Links at a Time

Crushproof 3” x 11” Flarelock Hose

SKU 977559 ACSFLT300 14999

Crushproof 3.5” x 11” Flarelock Hose

SKU 977589 ACSFLT350 20499

Crushproof 4” x 11” Flarelock Hose

SKU 977590 ACSFLT400 24499

Crushproof 2.5" Service Station KitSKU 977547 26999ACSDSS25• Includes:

(2) Each - 4’ x 2-1/2” Hoses (1) Each - 6’ x 2-1/2” Hose (1) Each - 2-1/2” Rubber “Y” Connector (2) Each - Straight Tailpipe Adapter, Hook and Chain (1) Each - Splice Connector

Crushproof 3” Service Station KitSKU 977548 ACSDSS30 32499

Crushproof 2.5" Y-Assembly Kit with F250 AdapterSKU 977549 18499ACSYA250• Designed for Converting

Single Hose into Dual Exhaust System Vehicle Purposes

3” Y-Assembly Kit with F300 Adapter

SKU 977550 ACSYA300 22499

Crushproof Door Port for 2-1/2" Hose (Rubber)SKU 977551 3999ACSDF25• Rubber Garage

Door Port Adapter• Designed for

2-1/2” ID

Exhaust Hoses

2-1/2" Crushproof Bell Hose AdapterSKU 977544 4999ACSRA250• Designed for Easy Adapting

to All Sorts of Tailpipes• Connects with Ball and Snap

3” Crushproof Bell Hose AdapterSKU 977545 4999ACSRA300

Crushproof Door Port for 3" Hose (Aluminum)SKU 977552 4999ACSADF30• Aluminum Port Allows

Hose to be Vented Through the Door

Crushproof Door Port for 4” Hose (Aluminum)SKU 977554 6999 ACSADF40

Crushproof 2.5" Straight Tailpipe Adapter with Hook and ChainSKU 977591ACSF250

2999• Designed for Easy

Adapting to All Sorts of Tailpipes

3” Straight Tailpipe Adapter with Hook and Chain ........SKU 977539 ACSF300 ......3999

3.5” Straight Tailpipe Adapter with Hook and Chain....SKU 977540 ACSF350 ......5999

4” Straight Tailpipe Adapter with Hook and Chain ........SKU 977541 ACSF400 .......7499

3” x 6” Oval Tailpipe Adapter ...............................................SKU 977542 ACSF475 .......5499

3.5” x 8.5” Oval Tailpipe Adapter ......................................SKU 977543 ACSF575 .......6499

BONUSKershaw Knife*

KER1820GRY, KER1820RD orKER1820BL**

with Purchase of SKU 110313 VENHVPF30

Value: $19.99

30” Heavy Duty Pedestal Fan SKU 110313 24999VENHVPF30 • Heavy Duty 3-Speed Thermally

Protected Motor• Fan Head Tilts 90°

** Actual Knife model number delivered depends on available inventory.

Offer Good Through June 30, 2014

*Some products advertised may be considered illegal and may not be lawful to sell, purchase, or own in specific areas.

16 Prices Subject To Change Without Notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.

GeneratorsGeneratorsGenerators

Generator 3600 Watts SKU 409467 66999MTMGEN360MM0• Rated AC Output: 3000 Watts • Engine: 212CC Mi-T-M OHV with Low-Oil

Shutdown • Receptacles: (2) 120V, 20A GFCI

Duplex and 120V, 30A Twist Lock • Run Time: 8.5 Hours at Full Load

Generator 6000 Watts SKU 409470 99999MTMGEN60MM0• Rated AC Output: 5500 Watts • Engine: 389CC Mi-T-M OHV with Low-Oil

Shutdown • Receptacles: (2) 120V, 20A GFCI Duplex and

120V, 30A Twist Lock/120V/240V, 30A Twist Lock • Run Time: 6.5 Hours at Full Load

Generator 8000 Watts SKU 409471 1,19999MTMGEN80MME• Rated AC Output: 5500 Watts • Engine: 420CC Mi-T-M OHV with Low-Oil

Shutdown Electric Start (Battery Included • Receptacles: (2) 120V, 20A GFCI Duplex and

120V, 30A Twist Lock/ 120V/240V, 30A Twist Lock • Run Time: 6.0 Hours at Full Load

GP5000 Portable GeneratorSKU 973239 69999GENGP5000

XG8000E Portable Electric Start GeneratorSKU 462986 1,39999GENXG8000E

GP3250 Portable GeneratorSKU 973238 47999GENGP3250

XG7000E Portable Electric Start GeneratorSKU 432330 1,26999GENXG7000E

Free Delivery!in Continental United States

(except California)

Commercial - Job Site Pressure Washers

Performance Under Pressure

Pressure WashersPressure WashersPressure Washers

Pump• Brass and Stainless-Steel Unloader• Built-In Low Pressure Detergent Injection• Thermal Relief Valve Pump Protection• In-Line Water Strainer

Engine• Mi-T-M Series Engine with Low-Oil Shutdown• All Models are Carb Compliant in all Fifty States

Frame• 1-Inch Powder Coated Steel Tube Handle

Allows for Increased Portability• Powder Coated Steel Base Plate• Quick Release Gun/Wand Holder and Hose Wrap• Pneumatic Tires with Solid Steel Axle• Dual Rubber Isolators

Units Include:• Quick Connect Nozzles (15°, 25° and Detergent Nozzle)• 25' x 3⁄8" Wire-Braided Pressure Hose

(50' on MTMCM3501MMB and MTMCM401MMB Models)• Professional-Grade Insulated Trigger Gun with Safety Lock-Off• 36-Inch Lance with Rubber Grip

PRESSURE WASHERSPORTABLE GENERATORS

2700 PSI Cold Water Pressure Washer SKU 409456 MTMCM270MLB

64900

3500 PSI Cold Water Pressure Washer SKU 409463 MTMCM3501MMB

1,14900

3000 PSI Cold Water Pressure Washer SKU 409457 MTMCM30MLB

73900

4000 PSI Cold Water Pressure Washer SKU 409464 MTMCM401MMB

1,19999

SKU Part # PSI GPM DISPLACEMENT/ENGINE

409456 MTMCM270MLB 2700 2.4 212cc Mi-T-M OHV409457 MTMCM30MLB 3000 2.4 212cc Mi-T-M OHV409463 MTMCM3501MMB 3500 2.8 280cc Mi-T-M OHV

409463 MTMCM401MMB 4000 3.4 420cc Mi-T-M OHV

Vertical Cold Water Pressure Washer 2600 PSI SKU 409480 MTMCV260MMC

44999

Vertical Cold Water Pressure Washer 2400 PSI SKU 410036 39999MTMCV240MMC

• PSI: 2400 GPM: 2.0 Engine 170CC Mi-T-M OHV Includes: Professional Grade Trigger Gun, Two Piece Lance, 30’ X 1/4” Nylon-Braided Pressure Hose and Quick Connect Nozzles (15, 25-Degree and Detergent Nozzle)

• Direct Drive Axial Piston AR Pump

NEW

PRESSURE WASHERSPORTABLE GENERATORS

Maximum Output Under Any Given Situation. Durable and Reliable Featuring a Mi-T-M OHV Engine

We Carry the Full Line of Generac Generators*

Usage: 1-2 Hours Per Week

THESE

GREAT LITTLE

MACHINES

REALLY PACK

A PUNCH!

• Rated Watts: 5000• Runtime at 1/2 Load: 10 Hours• Outlets: (2) Duplex, 5-20R;

(1) Twistlock L14-30R• Low-Oil Level Shutdown

Automatically Safeguards Engine

• Rated Watts: 3250• Runtime at 1/2 Load: 9.7 Hours• Outlets: (1) 120V 20A 5-20R

Duplex Outlet; (1) 120/240V 20A L14-20R Twist Lock Outlet

• Gas Tank: 3.5 Gallon• Low-Oil Level Shutdown

Automatically Safeguards Engine

• Rated Watts: 8000• Run Time at 1/2 Load: 10 Hours• Outlets: (1) 120/240V 30A

L14-30R Twist Lock Outlet; (2) 120V 20A GFCI 5-20R Duplex

• Includes: First Oil and Maintenance Kit

• Gas Tank: 9 Gallon• Low-Oil Level Shutdown

Automatically Safeguards Engine• PowerBar™ Easily Monitors

Power Being Consumed and Available

• Rated Watts: 7000• Runtime at 1/2 Load: 12 Hours• Outlets: (2) 120V 20A GFCI

5-20R Duplex Outlets; (1) 120/240V 30A L14-30R Twist Lock Outlet

• Gas Tank: 9 Gallon• Low-Oil Level Shutdown

Automatically Safeguards Engine• PowerBar™ Easily Monitors

Power Being Consumed and Available

Usage: 2-5 Hours Per Week

Residential and Light Commercial

• Direct Drive Crankshaft Mi-T-M Pump with Adjustable Pressure

• Direct Drive Axial Piston AR Pump

Usage: 5-10 Hours Per Week

• Direct Drive Crankshaft Mi-T-M Pump with Adjustable Pressure

Usage: 5-10 Hours Per Week

• Direct Drive Crankshaft Mi-T-M Pump with Adjustable Pressure

• Direct Drive Crankshaft Mi-T-M Pump with Adjustable Pressure

Usage: 5-10 Hours Per Week

*The Generac Generators Listed Above are Not for Sale in California

17Prices Subject To Change Without Notice.Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.

121 Floor and General Cleaner 5 Gallon SKU 227560WWSKC-5G

12599

• Concentrated Floor Cleaning Solution Removing Grease and Grime from Shop Floors

• Mop and Bucket or Floor Scrubbing Machines• Concentrated for Cost Effectiveness• Safe on Sealed Floors

Heavy-Duty Degreaser Concentrate12 Spray Bottels (32 oz. Bottles) SKU 222841 17499WWSHD-32CS4 Gallons (4) 1 Gallon JugsSKU 222846 12999WWSHD-1GCS5 Gallon SKU 227558 14699WWSHD-5G

Storm Ultra Spray Wash Solution 4 Gallons (4) 1 Gallon Jugs SKU 222861 14799WWSSU-1GCS5 Gallon SKU 227559 16999WWSSU-5G• Professional Wash Solution for

Heated Spray Cabinet/Jet Cabinet Style Parts Washing Equipment

• Super Concentrated for Cost Effectiveness• Quickly Blasts Away Grease, Oil, Carbon and Grime

Designed to Effectively Replace Hazardous Solvent in Water Based Parts Washers• Concentrated to Be

Powerful and to Save You Money

• Quickly Removes Grease, Oil, Carbon and Grime While Safe for the Technician and Your Parts

Portable BlasterSKU 094831 11999DEEPB1 Ideally Suited for Small Abrasive Jobs. Simply Fill with Abrasive, Attach Your Air Hose and Begin Blasting.• Sand Reservoir – 4 Lbs Capacity• Cast Aluminum Gun• 70-110 PSI Operating Range

Degreaser and Wash Solution

Replacement Washer PumpSKU 462476 399924803-1• Fits OEM 24803

Water-Based Parts Washer

Replacement Washer PumpSKU 462476 349924800-1• Fits OEM 24800 and OEM 24801 Water-Based Parts Washer

40 Gallon Parts Washer SKU 300118 2799924803• Use with Non-Flammable

Water-Based Degreaser or Cleaning Agent• Includes a Large Compartment Shelf and Small Parts Tray• Tanks are Made of Powder Coated 20 Gauge Steel

for Durability and Rust Resistance• Fully Flexible Nozzle and Fusible Link Which

Automatically Closes the Lid in Case of Fire• Dimensions: 44.75” x 20.5” x 35”• 6’ Electical Cord

Water-Based Parts Washers

Jake Torches

106 Piece Waterproof Heat Shrink Tube SetSKU 420334 2999 68164• Tubes Shrink to Fit Over Cable Splices and Can Be Used for Wire

Harnessing, Covering, Marking and Bundling of Wires• Adhesive Lined Inner Wall to Seal Out Moisture• 3:1 Shrink Ratio• Waterproof

171 Piece Heat Shrink Tube SetSKU 420335 1999 68165• Protection and Insulation of Components and Wires• Protection Against Water and Moisture Ingress Preventing Corrosion• Color Coordinated Sizes• Quick and Simple to Shrink by Heat Gun

5-Speed Bench Drill PressSKU 46248024825

13999 • 5-Speed 1/3 HP

620-3100 RPM Motor• Drilling Depth: 2"• Chuck: 1/16" - 1/2"• Distance Spindle/

Table 7-7/8"• Distance Spindle

to Base 11-7/16"

15" Heavy Duty 16-Speed Floor Drill PressSKU 462481 49999 24826• Swing: 15"• Drilling Capacity 3/4"• 16 Speed Spindle:

240-3200 RPM• Vertical Stroke:

3-11/64"• Motor: 1 HP 110

VAC 12A• Dimensions:

15" x 25-1/3" x 63-1/3"

Heat Shrink Tube Sets

3 1/2 Gallon Parts Washer SKU 300128 699924800• Water Based Parts Washer with

325 Gallon Per Hour Electric Pump• Steel Work Basin is 18” Wide X 13.5” Deep

and 9” High

ORIFLO Flow Through Parts BrushSKU 3423361999PBC50001• Long-lasting, Stiff Trialoy® Polyester

Filament Can be Used with Either Petroleum or Water-Based Cleaning Solutions

• Length: 10.25” (26 cm)

Atlasta Parts Cleaning Brush SKU 3423391499PBC50003• A Tough Brush That will Last and Last• Length: 9.75” (25 cm)

Flow Through Brush w/Hose SKU 459114 2499PBC50001H• Hose: O.D. 5/8”, I.D.

1/4” Molded Cap to Fit 0.500”– 0.600” Parts Washer Nozzles

BONUS171 Piece Heat Shrink Tube Set

SKU 420335 68165

with Purchase of SKU 420339 Part# 24356

Value: $19.99

Professional 3-in-1 Soldering Iron KitSKU 420338 3499 24355• 3-in-1 Design Can Be Used as a Soldering Iron,

Torch or Hot Air Blower• Soldering Iron Kit Includes: Soldering Iron, Metal

Tip Wicking Cup with Sponge, Solder Wire, Protective Tip Cap, Heat-Shrink Deflector, Chisel Point Tip, Anvil Solder Tip, Needle Tip and Hot Air/Soldering Tip

• Compact Design, Easy to Carry and Cable Free• Ideal for Electrical Repair, Tin and Plastic

Melting, Heat Shrinkable Tubing, Auto Repair and Hobby, Jewelry Repair

• Power Range: 30w - 125w

Soldering Iron

Sand Blasting

Drill Presses

Abrasive Blast Cabinet (Bench Top)SKU 300119 1799924815• Easily Remove Paint, Rust and Oxidation• Fits on Bench or Cabinet• Dimensions H: 19.3”; W: 19.3”; Cubic Inches: 28.6”

REPAIR IT RIGHT

* While Supplies last

NEW

99NEW

NEWNEW

NEW

Automatically Closes the Lid in Case of Fire

NEW

Replacement Washer PumpSKU 462484 349924800-1• Fits OEM 24800 and OEM 24801 Water-Based Parts Washer

20 Gallon Parts Washer SKU 300117 1799924801• Water Based Parts Washer with 325 Gallon Per Hour Electric Pump• Steel Work Basin is 31” Wide X 2” Deep and 34.5” High• Lid Includes Fusible Link for Fire Safety

Professional 3-in-1 Butane Micro Torch KitSKU 420339 3499 24356• 3-in-1 Design Can Be Used as a Soldering Iron, Torch, or Hot Air

Blower• Easy to Set on Table Top with the Base• Micro Torch Kit Includes: Torch, Metal Tip Wicking Cup with

Sponge, Heat-Shrink Deflector, Chisel Point Tip, Anvil Solder Tip, Needle Tip and Hot Air/Soldering Tip and Base

• Compact Design, Easy to Carry and Cable Free• Ideal for Electrical Repair, Tin and Plastic Melting, Heat

Shrinkable Tubing, Auto Repair, Hobby Repair and Jewelry Repair• Power Range: 30w - 125w

SHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENT

Offer Good Through June 30, 2014

18 Prices Subject To Change Without Notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.

Welding Helmets

Welding Accessories

Welding/CuttingMedium Duty Oxy-Acetylene Outfit

Welding and Cutting ToteSKU 237672 THE03840990 37999

SKU 514020 29999THE0384-2530

• Ergonomic, Color-Coded Knobs that Identify Gas Type• Fabric Reinforced Neoprene Diaphragm• 250 Series Regulators• WH270FC-V Torch Handle• CA 270-V Cutting Attachment with Series 3 Cutting Tip

• Cuts Up to 1/2" (Up to 5" with Optimal Tips)• Welds up to 5/64"/1.9 mm (1-1/4"/31 mm with

Optimal Nozzles)• 2 Year Warranty Includes: Welding and Cutting

Torches, Flash Back Arrestors, Regulators, Dual Gas Line Spark Lighter and #5 Welding Goggles

Welder's GlovesSKU 972316 THE14230051

2499

Plasma Cutter CUTMASTER 42 SKU 301766 THE1-4200 1,44999• Includes: CUTMASTER 42 Power

Supply, All New SL40 Torch, Safety Gloves and Glasses, Instructional Plasma Cutting DVD, Consumables Set, Heavy-Duty Carrying Case and Power Plug Adapters

Pro Tac WelderSKU 255799 39899 SHA17030• Eco-Friendly Plastic Welder that is Great for Repairing Virtually

Anything Made of Plastic• Kit Includes: 4 Staple Styles, 2 Ironing Blades, Plastic Box for

Staples and Plastic Storage Case

250 Piece Welding Stud AssortmentSKU 271198 149968130• 250 Pc 3/40” Size • Use with Stud Welder or Stud Gun• Copper Coated Steel Construction

• Lightweight Outfit Allow You to Take the Torch to the Job • #0 Cutting Tip Cuts Up to 1/2’’ • #0 Welding Nozzles Welds Up to 5/64’’ • Check Valves and Flashback Arrestors

Tig Torch and AccessoriesSKU 295859 14499 THEW4013802(Required for TIG Welding)

Fabricator® 141i 3 in 1SKU 463249 69999 THEW1003141

• TIG Torch, 17V, 13 Ft, 8 Pin and Accessory Kit with 1/16”, 3/32”, 1/8” Thoriated

• Tungstens; 1/16”, 3/32”, 1/8” Collets; 1/16”, 3/32”, 1/8” Collet Bodies

• No. 5, 6, 7 Alumina Nozzle; Short Back Cap; Long Back Cap

• Comes Complete with: Fabricator 141i Power Supply, 10 Ft Tweco Fusion™ 140 Amp, MIG Gun, Bonus Contact Tips (1Ea): .023 (0.6mm), .030 (0.8mm) Installed, .035 (0.9 mm), Victor® Argon Regulator/Gauge & 12.5 Ft (3.8m) Hose, Electrode Holder, with 13 Ft (4m) Lead, Ground Clamp with 10 Ft (3m) Lead, Drive Rolls: .023"/.030" , 0.6mm/0.8mm), V Groove (Installed), .030"/.035" (0.8mm/0.9mm) for Flux Cored Wire, 4 General Purpose Stick Electrodes (E6013), Operator’s Manual & CD, 10 Ft (3m) Power Cord and NEMA, 5-15P 115V AC Plug, Power Adapter - 115V, 20A to 15A, Shoulder Strap

• Optional: TIG Torch and Accessories, Required for TIG Welding THEW4013802

Flat Square SKU 255808 SHA17031Outside Corner Sm. Wave SKU 255809 SHA17032Outside Corner/No Wave SKU 255820 SHA17033Inside Corner Sm. Wave SKU 255839 SHA17034Inside Corner/ No Wave SKU 255843 SHA17035Flat Small Wave SKU 255845 SHA17036Flat “S” Type SKU 255851 SHA17037

Fabricator 181i Auto Pak 3 in 1 Multi-Process Welding KitSKU 222748 89999 THEW1003188• Rated Output: 180A / 23V @ 20% Duty Cycle 145A / 22.5V @ 30%

Duty Cycle• Auto Pak Includes: Fabricator 181i Package PLUS: - E70S-6 Welding

Wire, .023”, 2 lb. - E70S-6 Welding Wire, .030”, 2 lb. - Welding Gloves -Tweco® 11-23 Tips, .023”, (25 qty) - Tweco 11-30 Tips, .030”, (25 qty) - Welder MIG Pliers- Auto-Darkening Welding Helmet*

(*Helmet Ships Separately After Completion of Form)

Core-Cut Staples – 100 Pack 5099ea.

Mini-Ductor Induction Heater KitSKU 436079 IDIMD-600

47500• Flameless Heating of Frozen Nuts,

Bearings, O2 Sensors and Other Seized Hardware

• No Collateral Damage as with a Torch

Flameless Heating of Frozen Nuts, Bearings, O2 Sensors and Other

No Collateral Damage as with a Torch

Auto Darkening Welding HelmetSKU 362974 499924357• Variable Shade 9-13, Variable

Sensitivity and Delay Controls• Viewing Area (3.54” x 1.37”) • Battery Powered with Solar Assist • Includes Replacement Cover Lenses

Auto Darkening Welding Helmet with Grinding FunctionSKU 347233 799924358• Variable Shade 9-13, Variable

Sensitivity and Delay Controls• Viewing Area (3.62” x 1.65”) • Battery Powered with Solar Assist • Includes Replacement Cover Lenses

Mini-Ductor

NEW

SHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENTSHOP EQUIPMENT

• Coverage for almost all vehicle makes and models• Universal coverage for RV, AG, marine, tool boxes and more…

Remember That Replacement is a Safety Issue. As lift supports lose pressure over time, they will fail to support the weight of the hood, hatch or trunk. This situation will not improve, and failure to replace the lift support could cause serious injury.

Add on Sales! Check Lift Supports While Performing Any Under Hood Service

Replacement of a Pair of Lift Supports Takes Only Minutes to Perform!

Rated Output: 180A / 23V @ 20% Duty Cycle 145A / 22.5V @ 30%

Reg. 949.99

SAVE$50

WIRE Welder's Combo Pack SKU 459159 SHA14526 3499

MIG Solid Wire E70S6 - .023 - 2 lbs. SKU 459160 SHA12000 1299

MIG Solid Wire E70S6 - .023 - 11 lbs. SKU 459162 SHA12001 3499

MIG Solid Wire E70S6 - .030 - 11 lbs. SKU 459164 SHA12003 2999

MIG Solid Wire E70S6 - .035 - 33 lbs. SKU 459173 SHA12007 9799

Flux Core Welding Wire - .030 - 2 lbs. SKU 459175 SHA12008 2999

Flux Core Welding Wire - .035 - 2 lbs. SKU 459180 SHA12009 2499

ELECTRODES E6011 1/8” Electrode 5 Lb SKU 988902 THE14400106 1699

E7018 1/8” Electrode 5 Lb SKU 988904 THE14400186 1799

25 PACK TIPS Lincoln Mig Contact .030 Tips SKU 343402 SHA12874 2499

Lincoln Mig Contact .035 Tips SKU 343403 SHA12875 2499

Miller Mig Contact .030 Tips SKU 343404 SHA12877 2499

Benzel & Tweco Mig Contact .023 Tips SKU 343399 SHA12937 1999

Benzel & Tweco Mig Contact .030 Tips SKU 343401 SHA12938 2499

SKU

MIG Solid Wire E70S6 - .023 - 2 lbs.

NEW