Upload
shikha-tiwary
View
232
Download
1
Embed Size (px)
Citation preview
7/28/2019 Shikha Tata Steel
1/35
A STUDY OF THE
TRANING & DEVELOPMENT
WITH SPECIAL
REFERENCE TO
TATA STEEL
In the partial fulfilment of therequirement for
the award of MBA degree
Submitted by:
1
7/28/2019 Shikha Tata Steel
2/35
Shikha kumari
CUJ/I/2010/MBA/32
DECLARATION
I Shikha hereby declare that this Industry project titled A STUDY OF
THE TRANING & DEVELOPMENT WITH SPECIAL
REFERENCE TO TATA STEEL is a bona fide work out by me.
I state that no portion of this project report is published or submitted to
any other organization. This study is done with the help of my guide, for
the fulfilment of my internship project. I hereby acknowledge that the
information is genuine to the best of my knowledge and has been collected
from reliable sources, the Internet, and the annual reports and corporate
sustainability reports of the TATA STEEL.
2
7/28/2019 Shikha Tata Steel
3/35
Certificate of Guide
This is to certify that Miss SHIKHA, Enroll No: CUJ/01/2010/MBA/32, student of
Semester VII of the IMBA Program has undertaken the project titled A STUDY OF
TRANING & DEVELOPMENT WITH SPECIAL REFERENCE TO TATA
STEEL under guidance OF MISS DEEBA ABMAD, Sr. Manager/IR of Wire Rod
Mill.
No portion of this project report is published or submitted to any other
University or organization. This study was done for the fulfillment of the requirements
of an internship project for the IMBA Program.
The information in the report is genuine to the best of my knowledge and has been
collected from reliable sources, the Internet, and the annual reports and corporate
sustainability reports of the Tata STEEL. The analysis and compilation was the
original work of the student based on secondary data.
She has completed his project satisfactorily. This certificate is being issued for academic
purpose.
3
7/28/2019 Shikha Tata Steel
4/35
Acknowledgement
There are times when one feels a sense of accomplishment combined with a
sense of gratitude. Writing the acknowledgement page in this project is one
among them.
I would like to thankProf. Tapas Ghoshal (Dean, School of
Management Sciences) who provided us a golden chance for doing an
internship. MISS DEEBA ABMAD MAM & B.K MISHRA SIR He constant
help throughout the project and there guidance was a key reason for the
success of this project. .
I am also very grateful to all the members whose constant motivation
and support has helped me to complete this project. Last but not the least I
thank all my team members whose constant hard work and brainstorming
sessions has led to the successful completion of this project work.
My project has become a reality only because of cooperation
of these among many other people who had helped me in successfully
completing this project.
4
7/28/2019 Shikha Tata Steel
5/35
Table of contents
Topic Page no.
Introduction
Scope of study
Objective of study
Executive summary
6
7
Overview of Tata steel
- Introduction
-Company history
-Operation of Tata steel
-Vision & mission
-Policy of Tata steel
8
9
10
11
12-13
Wire road mill
-introduction
-Department chart
-procedure of training
-wire mill flow chart
-Training flow chart
Training and development
-Traditional & modern approach
-Importance &objective
- model of training
14
15
16
17
18
19-20
21-22
23-34
5
7/28/2019 Shikha Tata Steel
6/35
INTRODUCTIONEmployee training tries to improve skills, or add to the existing level of knowledge
so that employee is better equipped to do his present job, or to prepare him for a
higher position with increased responsibilities. However individual growth is not
and ends in itself. Organizational growth need to be measured along with individualgrowth. Training refers to the teaching /learning activities done for the primary
purpose of helping members of an organization to acquire and apply the knowledge
skills, abilities, and attitude needed by that organization to acquire and apply the
same. Broadly speaking training is the act of increasing the knowledge and skill of
an employee for doing a particular job. In todays scenario change is the order of the
day and the only way to deal with it is to learn and grow. Employees have become
central to success or failure of an organization they are the cornucopia of ideas. So it
high time the organization realize that train and retain is the mantra of new
millennium.
SCOPE OF THE STUDY
The scope of the study covers in depth, the various training practices, modules,
formats being followed and is limited to the company Reliance Money and its
employees. The different training programmes incorporated/facilitated in Reliance
Money through its faculties, outside agencies or professional groups. It also judgesthe enhancement of the knowledge & skills of employees and feedback on its
effectiveness.
OBJECTIVE OF THE STUDY
The broad objective of the study of training policies in Reliance Money is to study
the impact of training on the overall skill development of workers. The specific
objectives of the study are:
1. To examine the effectiveness of training in overall development of skills of
workforce.
2. To examine the impact of training on the workers.
3. To study the changes in behavioural pattern due to training.4. To measure the differential change in output due to training
5. To compare the cost effectiveness in implanting training programmes.
6
7/28/2019 Shikha Tata Steel
7/35
EXECUTIVE SUMMARY
Every organization needs to have well trained and experienced people to perform theactivities that have to be done. If current or potential job occupants can meet this
requirement, training is not important. When this not the case, it is necessary to raise
the skill levels and increase the versatility and adaptability of employees. It is being
increasing common for individual to change careers several times during their
working lives. The probability of any young person learning a job to day and having
those skills go basically unchanged during the forty or so years if his career is
extremely unlikely, may be even impossible. In a rapid changing society employee
training is not only an activity that is desirable but also an activity that an
organization must commit resources to if it is to maintain a viable and
knowledgeable work force. The entire project talks about the training anddevelopment in theoretical as well as new concepts, which are in trend now. Here
we have discussed what would be the input of training if we ever go for and how can
it be good to any organization in reaping the benefits from the money invested in
terms like (ROI) i.e. return on investment. What are the ways we can identify the
training need of any employee and how to know what kind of training he can go for?
Training being covered in different aspect likes integrating it with organizational
culture. The best and latest available trends in training method, the benefits which
we can derive out of it. How the evaluation should be done and how effective is the
training all together. Some of the companies practicing training in unique manner a
lesson for other to follow as to how to train and retain the best resource in the worldto reap the best out of it. Development is integral part of training if somebody is
trained properly and efficiently the developments of that individual and the company
for whom he is working. Here we discussed about development of employee, how to
identify the needs, and after developing how to develop executive skill to sharpen
their knowledge. Learning should be the continuous process and one should not
hesitate to learn any stage. Learning and Developing is fast and easy at TATA
STEEL.
7
7/28/2019 Shikha Tata Steel
8/35
TATA STEEL
Tata Steel (BSE: 500470), formerly known as TISCO and Tata Iron and Steel
Company Limited, is the world's sixth largest steel company, with an annual crude
steel capacity of 31 million tones. It is the largest private sector steel company in
India in terms of domestic production. Ranked 258th on Fortune Global 500, it is
based in it is based in Jamshedpur, Jharkhand , India. It is part of Tata Group of
companies. Tata Steel is also India's second-largest and second-most profitable
company in private sector with consolidated revenues of Rs 1,32,110 crore and net
profit of over Rs 12,350 crore during the year ended March 31, 2008. Its main plant
is located in Jamshedpur, Jharkhand, with its recent acquisitions; the company has
become a multinational with operations in various countries. The Jamshedpur plant
contains the DCS supplied by Honeywell .The registered office of Tata Steel is in
Mumbai. The company was also recognized as the world's best steel producer by
World Steel Dynamics in 2005. The company is listed on Bombay Stock Exchange
and National Stock Exchange of India, and employs about 82,700 people (as of
2007).
8
http://en.wikipedia.org/wiki/Fortune_Global_500http://en.wikipedia.org/wiki/Fortune_Global_5007/28/2019 Shikha Tata Steel
9/35
COMPANY HISTORY
Tata Iron & Steel Company Ltd. (TISCO) is the iron and steel production
company associated with the Tata group of some 80 different industrial and other
business enterprises in India, founded by members of the Tata family. TISCO
operates as India's largest integrated steel works in the private sector with a market
share of nearly 13 percent and is the second largest steel company in the entire
industry. Its products and services include hot and cold rolled coils and sheets, tubes,
construction bars, forging quality steel, rods, structural, strips and bearings, steelplant and material handling equipment, Ferro alloys and other minerals, software for
process controls, and cargo handling services. Through its subsidiaries, TISCO also
offers tinplate, wires, rolls, refractorys, and project management services.Tata's
Early Beginnings in the 1800s Jamsetji Nusserwanji Tata was born into a well-
to-do family of Bombay Parsees in 1839. Tata Steel was established by Indian Parse
businessman Jamsetji Nusserwanji Tata in 1907 (he died in 1904, before the project
was completed). Tata Steel introduced an 8-hour work day as early as in 1912 when
only a 12-hour work day was the legal requirement in Britain. It introduced leave-
with-pay in 1920, a practice that became legally binding upon employers in India
only in 1945. Similarly, Tata Steel started a Provident Fund for its employees as
early as in 1920, which became a law for all employers under the Provident Fund
Act only in 1952. Tata Steel's furnaces have never been disrupted on account of a
labor strike and this is an enviable record.
9
7/28/2019 Shikha Tata Steel
10/35
OPERATIONS OF TATA STEEL
Tata Steel is one of the ventures of the Tata Group but it has many successful
companies under one umbrella. Some of the other notable Tata concerns and
their line of business is as follows:-
10
7/28/2019 Shikha Tata Steel
11/35
VISION AND MISSION
Vision
We make the difference through:-
Our people, by fostering team work, nurturing talent, enhancing leadership
capability and acting with pace, pride and passion.
Ouroffer, by becoming the supplier of choice, delivering premium products
and services, and creating value for our customers.
Our innovative approach, by developing leading edge solutions in
technology, processes andproducts.
Mission
Consistent with the vision and values of the founder Jamsetji Tata, Tata Steel
strives to strengthen Indias industrial base through the effective utilization of
staff and materials.
Tata Steel recognizes that while honesty and integrity are the essential
ingredients of a strong and stable enterprise, profitability provides the main
spark for economic activity.
Overall, the Company seeks to scale the heights of excellence in all that it
does in an atmosphere free from fear, and thereby reaffirms its faith in
democratic values.
VALUES
1. Respect for individuals.
2. Integrity.
11
7/28/2019 Shikha Tata Steel
12/35
3. Credibility.
4. Trusteeship
5. Excellence
POLICY OF TATA STEEL
Overall, the Company seeks to scale the heights of excellence in all that it
does in an atmosphere free from fear, and thereby reaffirms its faith in
democratic values.
Corporate social responsibility
Tata Steel believes that the primary purpose of a business is to improve
the quality of life of people.
Tata Steel shall conduct its business ever mindful of its social
accountability, respecting applicable laws and with regard for human
dignity.
Tata Steel shall positively impact and influence its partners in fostering
a sense of social commitment for their stakeholders.
Quality policy
Consistent with the group purpose, Tata Steel constantly strives to improve
the quality of life of the communities it serves through excellence in all facets
of its activities.
We are committed to create value for all our customers and key stakeholders
by continually standardizing, improving and innovating our offerings,
systems and processes involving all our employees.
12
7/28/2019 Shikha Tata Steel
13/35
This policy shall form the basis of establishing and reviewing the Business
Objectives and Strategies and shall be communicated across the organization.
The policy will be reviewed to align with business direction and to comply
with all the requirements of TQM Principles.
Human Resource Policy
Tata Steel is an equal opportunity employer.
Tata Steel recognizes that its people are the primary source of itscompetitiveness.
It will pursue management practices designed to enrich the quality of life of
its employees, develop their potential and maximize their productivity.
It will aim at ensuring transparency, fairness and equality in all its dealings
with its employees.
Tata Steel shall strive continuously to foster a climate of openness, mutual
trust and teamwork.
In the process Tata Steel shall strive to be the employer of choice by
attracting the best available talent and ensuring a cosmopolitan workforce.
Safety Policy
Tata Steels safety and occupational responsibilities are driven by our
commitment to ensure zero harm to people we work with and society at largeand are integral to the way we do business.
Safety Principles
Safety is a line management responsibility.
All injuries can be prevented.
13
7/28/2019 Shikha Tata Steel
14/35
Felt concern and care for the employee on 24 hours safety shall be
demonstrated by Leaders.
Employees shall be trained to work safely.
Working safely shall be condition of employment.
Every job shall be assessed for the risk involved and shall be carried out as
per authorized procedures/checklist/necessary work permit and using
necessary work permit and using necessary personal protective equipment.
We are committed to continual improvement in our S&OH performance.
We shall set objective-targets, develop, implement and maintain management
standards and systems, and go beyond compliance of the relevant industry
standards, legal and other requirements. .
INTRODUCTION OF WIRE ROD MILL
Wire Rod Mill is a flagship and haring single strand continuous Mill. Commissioned on
2nd March 1987 with a capacity of 300000 tonnes per annum with a mill availability of 68%presently this Mill is producing 421000 tonnes with a mill availability of 84%.
Wire Rod Mill certified according to the ISO:9002 Standards by Indian Register Quality
in the year 1995. This has ensured consistent performance through a documented quality
system.
Location & Unit size: Wire Rod Mill is situated of south east of Tata Steel works adjacent
to LD#1. Total area of WRM is 14500 Sqmt. & it has well laid railway network to
facilitate of smooth inflow of billets and out flow of coils (Finished product) and also as
well connected with the Road Highways.
Market Segment
WRM has its major market segment both in domestic as well as in the international
area with the key customers mainly in the domestic market.
WRM is principally producing Wire Rod of two different categories.
1. Plan Rod : 5.5 to 13 mm
2. Rebar (TMT) 8 TO 16 mm
Overview
14
7/28/2019 Shikha Tata Steel
15/35
Table : 1 Specification of WRM
DEPARTMENTAL CHART
15
Mill Capacity 4,21,000 tonnes per annum on specified product mix.
Range of Section
Round 5.5 mm to 13.0 mm dia
Re-bare 8.00 mm to 12 mm dia
Mill Speed 100 m/sec for 5.5 mm dia
Inputs BilletsSize : 130 mm x 130 mm x 12.25 m
Weight : 1590 Kgs.
Chief WRM T K Chakraborty
Head Process/
Rolling
Ramesh
Shankar
Senior Manager
F & S
A K P Sin h
Head Maint.
Binod Kumar
Manager
HR/IR
Deeba
Ahmad
Sr.Mgr.
Maint.
A N Jha
Sr.Manager
Technical Services
V Sridhar
Manager Mill
Providing &
Heating
Sr.Mgr. (IEM)
A N Jha
Sr.Manager,
Mech.Maint.
I Sengupta
7/28/2019 Shikha Tata Steel
16/35
PROCEDURE 0F TRAINING IN WRM
STEP 1: Training Executive, Training coordinator and all sectional heads are
responsible for the implementation of this procedure.
STEP 2: Identification of training needs of all designations for workers and
supervisors are done by concerned sectional heads in the Form.
STEP 3: Training requirements of officers are identified based on the managerial and
functional competency by Chief/ Head of the section and recorded as Personal
Development Plan (PDP). Such records are maintained at V.P. (LP) office.
STEP 4: Skill gap matrix is prepared for training identification ofeach individual.
STEP 5: An Annual training plan is prepared based on skill gap matrix.
STEP 6: A monthly training plan is prepared by Training coordinator in consultation
with concerned sectional heads.
STEP 7: The records of all training imparted at SNTI are maintained at TATA Intranet.
Records of internal training are maintained by Training coordinator.
STEP 8: The Training coordinatormonitors the compliance of training.
16
Manager
IEM
Asst.Manager
IEM
Asst Manager
Mechanical D K
Singh
Manager
Mechanical
7/28/2019 Shikha Tata Steel
17/35
STEP 9: It assess the effectiveness of training through an interview of a sample of trainees
and findings are recorded on Form. This exercise is carried out once in a year.
STEP 10: Training coordinator in the M.R. Meeting for review reports a monthly status
of training.
STEP 11: Training procedure is reviewed once in a year for its continuing suitability and
effectiveness. Records of such review are maintained.
WRM TRAINING FLOW CHART
17
Employee Cluster
TNS Formation
Plan
Officers
Training need (PDP)
Training Plan
Department SNTI / TMDC Others SNTI TMDC &Others
Outside
Acceptance
Recombination
Y
N NAcceptance
Training Execution
Training EffectivenessEvaluation
Training Execution
Training EffectivenessEvaluation
Y
YY
N
7/28/2019 Shikha Tata Steel
18/35
7/28/2019 Shikha Tata Steel
19/35
TRAINING AND DEVELOPMENT
It is a subsystem of an organization. It ensures that randomness is reduced and
learning or behavioural change takes place in structured format.
TRADITIONAL AND MODERN APPROACH OF TRANING AND DEVLOPMENT
Traditional Approach Most of the organizations before never used to believe in
training. They were holding the traditional view that managers are born and not
made. There were also some views that training is a very costly affair and not worth.
Organizations used to believe more in executive pinching. But now the scenario
seems to be changing.The modern approach- of training and development is that Indian Organizations
have realized the importance of corporate training. Training is now considered as
more of retention tool than a cost. The training system in Indian Industry has been
changed to create a smarter workforce and yield the best results.
TRAINING DEFINED
It is a learning process that involves the acquisition of knowledge, sharpening of
skills, concepts, rules, or changing of attitudes and behaviours to enhance the
performance of employees.
Training is activity leading to skilled behaviour
Its not what you want in life, but it knows how to reach it.
Its not where you want to go, but it knows how to get there.
Its not how high you want to rise, but it knows how to take off.
It may not be quite the outcome you were aiming for, but it will be an outcome.
19
4Q index: 3
Above
60%
4Q index: 2
PERFORMED AS MENTOR
4Q index:
4
7/28/2019 Shikha Tata Steel
20/35
Its not what you dream of doing, but its having the knowledge to do it.
It's not a set of goals, but its more like a vision.
Its not the goal you set, but its what you need to achieve it.
Training is about knowing where you stand (no matter how good or bad the current
Situation looks) at present, and where you will be after some point of time.Training is about the acquisition of knowledge, skills, and abilities (KSA) through
Professional development.
Importance of Training and Development
Optimum Utilization of Human Resources Training and Development helps in
optimizing the utilization of human resource that further helps the employee to
achieve the organizational goals as well as their individual goals.
Development of Human Resources Training and Development helps to provide
an opportunity and broad structure for the development of human resources
technical and behavioural skills in an organization. It also helps the employees in
attaining personal growth.
Development of skills of employees Training and Development helps in
increasing the job knowledge and skills of employees at each level. It helps to
expand the horizons of human intellect and an overall personality of the employees
Productivity Training and Development helps in increasing the productivity of the
employees that helps the organization further to achieve its long-term goalTeam spirit Training and Development helps in inculcating the sense of team
work, team spirit, and inter-team collaborations. It helps in inculcating the zeal to
learn within the employees
Organization Culture Training and Development helps to develop and improve
the organizational health culture and effectiveness. It helps in creating the learning
culture within the organization.
Organization Climate Training and Development helps building the positive
Perception and feeling about the organization. The employees get these feelings
from leaders, subordinates, and peers.
20
7/28/2019 Shikha Tata Steel
21/35
7/28/2019 Shikha Tata Steel
22/35
of the training program. Training objectives are of great significance from a number
of stakeholder perspectives.
1. Trainer
2. Trainee
3. Designer4. Evaluator
Trainer The training objective is also beneficial to trainer because it helps the
trainer to measure the progress of trainees and make the required adjustments. Also,
trainer comes in a position to establish a relationship between objectives and
particular segments of training.
Trainee The training objective is beneficial to the trainee because it helps inreducing the anxiety of the trainee up to some extent. Not knowing anything or
going to a place which is unknown creates anxiety that can negatively affect
learning. Therefore, it is important to keep the participants aware of the happenings,
rather than keeping it surprise.
Secondly, it helps in increase in concentration, which is the crucial factor to make
the
Training successful. The objectives create an image of the training program in
trainees mind that actually helps in gaining attention. Thirdly, if the goal is set to be
challenging and motivating, then the likelihood of achieving those goals is much
higher than the situation in which no goal is Set. Therefore, training objectives helps
in increasing the probability that the participants will be successful in training.
Designer The training objective is beneficial to the training designer because if the
Designer is aware what is to be achieved in the end then hell buy the training
package according to that only. The training designer would then look for the
training methods, training equipments, and training content accordingly to achieve
those objectives.
Furthermore, planning always helps in dealing effectively in an unexpected
situation.
Consider an example; the objective of one training program is to deal effectively
with
22
7/28/2019 Shikha Tata Steel
23/35
Customers to increase the sales. Since the objective is known, the designer will
design a training program that will include ways to improve the interpersonal skills,
such as verbal and non verbal language, dealing in unexpected situation i.e. when
there is a defect in a product or when a customer is angry. Therefore, without any
guidance, the training may not be designed appropriately.Evaluator It becomes easy for the training evaluator to measure the progress of
the trainees because the objectives define the expected performance of trainees.
Training objective is an important to tool to judge the performance of participants.
Training and Human Resource Management
The HR functioning is changing with time and with this change, the relationship
between the training function and other management activity is also changing. The
training and development activities are now equally important with that of other HR
functions. Gone are the days, when training was considered to be futile, waste oftime, resources, and money. Now-a-days, training is an investment because the
departments such as, marketing & sales, HR, production, finance, etc depends on
training for its survival. If training is not considered as a priority or not seen as a
vital part in the organization, then it is difficult to accept that such a company has
effectively carried out HRM. Training actually provides the opportunity to raise the
profile development activities in the organization To increase the commitment level
of employees and growth in quality movement (concepts of HRM), senior
management team is now increasing the role of training. Such concepts of HRM
require careful planning as well as greater emphasis on employee development and
long term education. Training is now the important tool of Human ResourceManagement to control the attrition rate because it helps in motivating employees,
achieving their professional and personal goals, increasing the level of job
satisfaction, etc. As a result training is given on a variety of skill development and
covers a multitude of courses.
Role of HRD Professionals in Training
This is the era of cut-throat competition and with this changing scenario of business;
the role of HR professionals in training has been widened. HR role now is:
1. Active involvement in employee education2. Rewards for improvement in performance
3. Rewards to be associated with self-esteem and self-worth
4. Providing pre-employment market oriented skill development education and post-
employment support for advanced education and training
6. Flexible access i.e. anytime, anywhere training.
Models of Training
Training is a sub-system of the organization because the departments such as,marketing & sales, HR, production, finance, etc. depends on training for its survival.
23
7/28/2019 Shikha Tata Steel
24/35
Training is a transforming process that requires some input and in turn it produces
output in the form of knowledge, skills, and attitudes (KSAs).
THE TRAINING SYSTEM
A System is a combination of things or parts that must work together to perform a
particular function. An organization is a system and training is a sub system of the
organization. The System Approach views training as a sub system of an
organization. System Approach can be used to examine broad issues like objectives,
functions, and aim. It establishes a logical relationship between the sequential stages
in the process of training need analysis (TNA), formulating, delivering, and
evaluating. There are 4 necessary inputs i.e. technology, man, material, time
required in every system to produce products or services. And every system must
have some output from these inputs in order to survive. The output can be tangible
or intangible depending upon the organizations requirement. A system approach totraining is planned creation of training program. This approach uses step-by-step
procedures to solve the problems. Under systematic approach, training is undertakenon planned basis. Out of this planned effort, one such basic model of five steps is
system model that is explained below. Organization are working in open
environment i.e. there are some internal and external forces, that poses threats and
opportunities, therefore, trainers need to be aware of these forces which may impact
on the content, form, and conduct of the training efforts. The internal forces are the
various demands of the organization for a better learning environment; need to be up
to date with the latest technologies.
The three model of training are:1. System Model
2. Instructional System Development Model
3. Transitional model
System Model Training
The system model consists of five phases and should be repeated on a regular basis
to make further improvements. The training should achieve the purpose of helpingemployee to perform their work to required standards. The steps involved in System
Model of training are as follows:
1. Analyse and identify the training needs i.e. to analyse the department, job,
2. Employees requirement, who needs training, what do they need to learn,
estimating training cost, etc. The next step is to develop a performance measure on
the basis of which actual performance would be evaluated.
3. Design and provide training to meet identified needs. This step requires
developing objectives of training, identifying the learning steps, sequencing and
Structuring the contents.
4. Develop- This phase requires listing the activities in the training program that will
24
7/28/2019 Shikha Tata Steel
25/35
Assist the participants to learn, selecting delivery method, examining the training
Material, validating information to be imparted to make sure it accomplishes all the
goals & objectives.
5. Implementing is the hardest part of the system because one wrong step can lead to
the failure of whole training program.6. Evaluating each phase so as to make sure it has achieved its aim in terms of
Subsequent work performance. Making necessary amendments to any of the
Previous stage in order to remedy or improve failure practices.
Instructional System Development Model (ISD)Model
Instructional System Development model was made to answer the training problems.This model is widely used now-a-days in the organization because it is concerned
with the training need on the job performance. Training objectives are defined on thebasis of job responsibilities and job description and on the basis of the defined
objectives individual progress is measured. This model also helps in determining
and developing the favourable strategies, sequencing the content, and delivering
media for the types of training objectives to be achieved. The Instructional System
Development model comprises of five stages:
1. ANALYSIS This phase consist of training need assessment, job analysis, and
Target audience analysis.
25
7/28/2019 Shikha Tata Steel
26/35
2. PLANNING This phase consist of setting goal of the learning outcome,
Instructional objectives that measures behaviour of a participant after the training,
Types of training material, media selection, methods of evaluating the trainee,
Trainer and the training program, strategies to impart knowledge i.e. selection of
content, sequencing of content, etc.3. DEVELOPMENT This phase translates design decisions into training material.
It consists of developing course material for the trainer including hand-outs,
Workbooks, visual aids, demonstration props, etc., course material for the trainee
including hand-outs of summary.
4. EXECUTION This phase focuses on logistical arrangements, such as arranging
Speakers, equipments, benches, podium, food facilities, cooling, lighting, parking,
and other training accessories.
5. EVALUATION The purpose of this phase is to make sure that the training
Program has achieved its aim in terms of subsequent work performance. This phase
Consists of identifying strengths and weaknesses and making necessary amendments
to any of the previous stage in order to remedy or improve failure practices.
The ISD model is a continuous process that lasts throughout the training program. Italso highlights that feedback is an important phase throughout the entire training
program. In this model, the output of one phase is an input to the next phase.
Transitional model focuses on the organization as a whole. The outer loop describes
the vision, mission and values of the organization on the basis of which training
model i.e. inner loop is executed.
Vision focuses on the milestones that the organization would like to achieve after
the defined point of time. A vision statement tells that where the organization sees
itself few years down the line. A vision may include setting a role mode, or bringing
some internal transformation, or may be promising to meet some other deadlines.
Mission explain the reason of organizational existence. It identifies the position inthe community. The reason of developing a mission statement is to motivate, inspire,
26
7/28/2019 Shikha Tata Steel
27/35
and inform the employees regarding the organization. The mission statement tells
about the identity that how the organization would like to be viewed by the
customers, employees, and all other stakeholders.
Values is the translation of vision and mission into communicable ideals. It
reflects the deeply held values of the organization and is independent of currentindustry environment. For example, values may include social responsibility,
excellent customer service, etc. The mission, vision, and values precede the
objective in the inner loop. This model considers the organization as a whole. The
objective is formulated keeping these three things in mind and then the training
model is further implemented.
LEARNING AND TRAININGIrrespective of the type or method of training, a trainer has to keep in mind some of
the principles of learning or motivation, which would enhance internationalization of
what is taught.
Motivation
A trainee needs to have a desire to learn and benefit from the programme. If the is
not interested, or is de-motivated, the learning outcome is going to be insignificant
and the company will have spent its money badly. On the other hand, being too
intense about learning and outcome may result in setting over ambitious goals for
the individual.
27
7/28/2019 Shikha Tata Steel
28/35
Reinforcement
Following on the concept of motivation is that of reinforcement. For learning to take
place and be internalized to the desired extent, a trainee is rewarded or given some
encouragement. This reinforcement, or the acknowledgement that what has been
acquired is desirable, can be either an extrinsic or intrinsic reward-external praise orsome tangible reward, or the individuals feeling of a sense of progress. Current
stress is on positive support and helpful behaviour, even when mistakes are made.
Feedback
During the training process, it is useful for the trainee to be told how he is
progressing. Several researchers have confirmed that knowledge of results is an
effective motivator. Constant and periodic feedback has positive effects on the
trainees learning. Unless the trainee knows how close his performance comes to the
desired standard, he will not have an opportunity to improve. Feedback therefore
provides a basis for correcting oneself.
Secondly, feedback helps to sustain the trainees interest in the task, or in each
learning that is taking place, by bringing greater involvement with the learning
process. If feedback is to be meaningful, it should follow a learning segment as
quickly as possible.
TRAINING INPUTS
There are three basic types of inputs;
(I)Skills
(ii)Attitude(iii)Knowledge.
The primary purpose of training is to establishing a sound relationship is at its best
when the workers attitude to the job is right, when the workers knowledge of the job
is adequate, and he has developed the necessary skills. Training activities in an
industrial organization are aimed at making desired modifications in skills, attitudes
and knowledge of employee so that they perform their jobs most efficiently and
effectively.
BEST TIME TO IMPART TRAINING TO EMPLOYEE
1. NEW RECRUITS TO THE COMPANY
These have a requirement for induction into the company as a whole in terms of its
Business activities and personnel policies and provisions, the terms, conditions andBenefits appropriate to the particular employee, and the career and advancement
Opportunities available.
2. TRANSFEREES WITHIN THE COMPANY
These are people who are moved from one job to another, either within the samework area, i.e. the same department or function, or to dissimilar work under a
28
7/28/2019 Shikha Tata Steel
29/35
different management. Under this heading we are excluding promotions, which take
people into entirely new levels of responsibility.
3. PROMOTIONS
Although similar to the transferee in that there is a new job to be learned in new
Surroundings, he is dissimilar in that the promotion has brought him to a new levelof
Supervisory or management responsibility. The change is usually too important and
Difficult to make successfully to permit one to assume that the promotes will pick it
up as he goes along and attention has to be paid to training in the tasks and the
responsibilities and personal skills necessary for effective performance.
4. NEW PLANT OR EQUIPMENT
Even the most experienced operator has everything to learn when a computer and
Electronic controls replace the previous manual and electro-mechanical system on
the process plant on which he works. There is no less a training requirement for the
Supervisors and process management, as well as for technical service production
control and others.
5. NEW PROCEDURES
Mainly for those who work in offices in commercial and administrative functions
but also for those who we workplace is on the shop floor or on process plant on any
occasion on which there is a modification to existing paperwork or procedure for,
say the withdrawal of materials from stores, the control of customer credit the
approval of expense claims, there needs to be instruction on the change in the way of
working in many instances, a note bringing the attention of all concerned the change
is assume to be sufficient, but there are cases, such as when total new systems in
corporation IT up dates are installed, when more thorough training is needed.6. NEW STANDARDS, RULES AND PRACTICES
Changes in any one these are likely to be conveyed by printed note or by word ofmouth by the manager to his subordinates, and this can be the most satisfaction way
of dealing with the change from the point of view of getting those affected to
understand their new responsibility. However not all changes under this heading can
be left to this sort of handling. Even the simplest looking instruction may be
regarded as undesirable or impracticable by whoever has to perform it he may not
understand the purpose behind the change and lose confidence in a management
which he now believes to be messing about, or he may understand the purpose and
have a better Alternative to offer if it is not too late.
7. NEW RELATIONSHIP AND AUTHORITIES
These can arise, as a result of management decisions, in a number of ways. In
examples, the recognition of the accounts department can result in a realization of
responsibilities between the section leaders of credit control, invoicing and customer
records, although there is no movement of staff between the sections (i.e. no
transfers). Although the change in work content for each clerk and supervisor is
defined clearly for each person in the new procedures, there is nevertheless a need
for each person to know where he stands in the new set up, which is responsible forwhat, and where to direct problems and enquiries as they arise in the future.
29
7/28/2019 Shikha Tata Steel
30/35
8. MAINTENANCE OF STANDARDS
We are here concerned with maintenance of standards through training, for it must
be remembered that supervision and inspection and qualify control are continuously
responsible for standards and exercise their own authorities to this end. Although it
isgenerally agreed that some retraining from time to time, taking varied forms even
for the one group of employees, does act as both a reminder and a stimulus, there is
not much agreement on the next frequency and form that such retraining should
take, of there is as yet little scientific knowledge on this subject which is of much
use in industrial situations.
9. THE MAINTENANCE OF ADAPTABILITY
Again, whilst there is little scientific study of the loss of ability to learn new skills in
Those cases where people spend a long time without change, and without the need to
learn, there is increasing evidence in current experience to suggest that this is the
case in industrial employment. Add, of course, there is the inference arising from the
laboratory experiments of psychologists.
10. THE MAINTENANCE OF MANAGEMENT SKILLS & STANDARDS
Skills in supervising, employee appraisal, communications, leadership etc are
important in all companies. Some of these skills are seen to be critical to major
developments in company organisation, culture, employee empowerment and so on.
Initial training in these skills is not uncommon in the largest companies on
appointment into management and supervision. But continuous training and
performance monitoring is rare, despite the common knowledge that standards are as
varied as human nature.
11. RETIREMENT AND REDUNDANCY
Employees of any position in the company who are heading towards retirement willBenefit from learning about health, social life, work opportunities money
management etc. Internal or external courses are best attended a year or two before
retirement date, in a few companies a member of Personnel will act as a counsellor
as required.BENEFITS OF TRAINING
Employees and the organization need to realize the importance of contribution and
Learning for mutual growth and development. Training is the answer to deal with
Stagnation stage by constantly updating it in every field. Other benefits of trainingInclude:
Hiring appeal: companies that provide training attract a better quality
Workforce.
Assessing and addressing any performance deficiency.
Enhancing workforce flexibility. Cross-cultural training is essential for them
for better adjustment in the new environment.
Increasing commitment: Training acts as a loyalty booster. Employee
motivation is also enhanced when the employee knows that the organization
would provide them opportunities to increase their skills and knowledge.
30
7/28/2019 Shikha Tata Steel
31/35
It gives the organization a competitive edge by keeping abreast of the latest
changes; it acts as a catalyst for change.
Higher customer satisfaction and lower support cost results through
improved service, increased productivity and greater sufficiency.
Training acts as benchmark for hiring promoting and career planning. It acts act as a retention tool by motivating employee to the vast
Opportunities for growth available in an organization.
THE EVALUATION OF TRAINING
There are a number of expressions used to describe steps taken by management and
by training offices at the conclusion of training and during the days or weeks
afterwards. These expressions include validation, evaluation, follow-up and
implementation, as well as cost benefit, which have appeared in more recent years.We are interested in all of these and have already tackled one of the,
implementation, and we start by giving our definitions in order to establish a clearer
picture of what each is, and how they relate to each other.
Evaluation of training, or, indeed of anything, consists simply of putting a value to
it. To evaluate training means undertaking a search for the effect that it has had on
the people and the situations, which it influences, and then trying to measure or
estimate whether this is advantageous or disadvantageous. We shall see that at the
level of pure training there is an evaluation to be made, but that the principal
evaluation is at a higher level in the chain. First the chain of intentions is clear at the
outset1. The forecourt attendants were to receive training to a defined level of
Competence.
2. They were then to apply their new capability correctly during the service that theygave to motorists.
3. The motorists would respond to this with a reaction of pleasure and would tend to
use that particular station rather more, thus increasing the amount of gasoline
sold.
4. The increased sales, and negligible increased costs, would improve the revenue
and the profits.
A TRAINING TOOL: INSPIRING OTHERS
31
7/28/2019 Shikha Tata Steel
32/35
In the new era new era, challenges for the trainer are to create learning environment.
Trainer needs to innovate new ways design and deliver the training inputs. Wide
range of technique like interactive methods like teaching, experiential learning cases
inventories games, including humour. Whereas we have the ancient way ofstorytelling as a powerful tool to create learning for adult managers of industry.
Sharing ones own perception, experience and ideas learning value can be increased
exponentially.
Methods of Training
There are various methods of training, which can be divided in to cognitive and
Behavioral methods. Trainers need to understand the pros and cons of each method,
also its impact on trainees keeping their background and skills in mind before giving
training. Cognitive methods are more of giving theoretical training to the trainees.
The various methods under Cognitive approach provide the rules for how to do
something, written or verbal information, demonstrate relationships among concepts,etc. These methods are associated with changes in knowledge and attitude by
stimulating learning. The various methods that come under Cognitive approach are:
LECTURES A Method of Training
It is one of the oldest methods of training. This method is used to create
understanding of a topic or to influence behaviour, attitudes through lecture. A
lecture can be in printed ororal form. Lecture is telling someone about something. Lecture is given to enhance
the knowledge of listener or to give him the theoretical aspect of a topic. Training is
basically incomplete without lecture. When the trainer begins the training session bytelling the aim, goal, agenda, processes, or methods that will be used in training that
means the trainer is using the lecture method. It is difficult to imagine training
without lecture format. There are some variations in Lecture method. The variation
here means that some forms of lectures are interactive while some are not.
Straight Lecture: Straight lecture method consists of presenting information, which
the trainee attempts to absorb. In this method, the trainer speaks to a group about a
topic. However, it does not involve any kind of interaction between the trainer and
the trainees. A lecture may also take the form of printed text, such as books, notes,
etc. The difference between the straight lecture and the printed material is the
trainers intonation, control of speed, body language, and visual image of the trainer.The trainer in case of straight lecture can decide to vary from the training script,
based on the signals from the trainees, whereas same material in print is restricted to
what is printed. A good lecture consists of introduction of the topic, purpose of the
lecture, and priorities and preferences of the order in which the topic will be
covered.
Main Features of Lecture Method Some of the main features of lecture method are:
Inability to identify and correct misunderstandings
Less expensive
Can be reached large number of people at once
Knowledge building exercise
32
7/28/2019 Shikha Tata Steel
33/35
Less effective because lectures require long periods of trainee inactivity
Demonstration Training Method
This method is a visual display of how something works or how to do something. As
an example, trainer shows the trainees how to perform or how to do the tasks of thejob. In order to be more effective, demonstration method should be should be
accompanied by the discussion or lecture method.
To carry out an effective demonstration, a trainer first prepares the lesson plan by
Breaking the task to be performed into smaller modules, easily learned parts. Then,
the trainer sequentially organizes those modules and prepares an explanation for
why that part is required. While performing the demonstration, trainer:
Demonstrates the task by describing how to do, while doing
Helps the focusing their attention on critical aspects of the task
Tells the trainees what you will be doing so they understand what you will be
showing them Explains why it should be carried out in that way
The difference between the lecture method and the demonstration method is thelevel of involvement of the trainee. In the lecture method, the more the trainee is
involved.
The financial costs that occur in the demonstration method are as follows:
Cost of training facility for the program
Cost of materials that facilitate training
Food, travel, lodging for the trainees and the trainers
Compensation of time spent in training to trainers and trainees
Cost related to creating content, material Cost related to the organization of the training
After completing the demonstration the trainer provide feedback, both positive and
or
Negative, give the trainee the opportunity to do the task and describe what he is
doing and why.
Discussion Training Method
This method uses a lecturer to provide the learners with context that is supported,
elaborated, explains, or expanded on through interactions both among the traineesand between the trainer and the trainees. The interaction and the communication
between these two make it much more effective and powerful than the lecture
method. If the Discussion method is used with proper sequence i.e. lectures,
followed by discussion and questioning, can achieve higher level knowledge
objectives, such as problem solving and principle learning.
The Discussion method consists a two-way flow of communication i.e. knowledge
in the form of lecture is communicated to trainees, and then understanding is
conveyed back by trainees to trainer.
Understanding is conveyed in the form of verbal and non-verbal feedback that
enables the trainer to determine whether the material is understood. If yes, then
33
7/28/2019 Shikha Tata Steel
34/35
definitely it would help out the trainees to implement it at their workplaces and if
not, the trainer may need to spend more time on that particular area by presenting
the information again in a different manner.
Questioning can be done by both ways i.e. the trainees and the trainer. When the
trainees ask questions, they explain their thinking about the content of the lecture. Atrainer who asks questions stimulates thinking about the content of the lecture.
Asking and responding questions are beneficial to trainees because it enhance
understanding and keep the trainees focused on the content. Besides that,
discussions, and interactions allow the trainee to be actively engaged in the material
of the trainer. This activity helps in improving recall.
Computer-Based Training (CBT)
With the world-wide expansion of companies and changing technologies, the
demands for knowledge and skilled employees have increased more than ever,which in turn, is putting pressure on HR department to provide training at lower
costs. Many organizations are now implementing CBT as an alternative to classroombased training to accomplish those goals.
Some of the benefits of computer-based training are:
34
7/28/2019 Shikha Tata Steel
35/35