Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
www.glasdon.ie
Shelters
There are a large number of companies offering shelters and we recognise that for potential customers this can make the task of selecting the most suitable product and supplier a difficult and even confusing one. We would therefore like to help you in making your decision by highlighting some of the reasons for buying from Glasdon.
We are proud to offer an unrivalled standard of customer service and believe that our products offer the very best value for money over the long term.
Why Choose a Glasdon Shelter?
Zone™ Shelter - Wind tunnel testing at MIRAThe new Glasdon Innovation & Export Centre
Proven Track Record• Glasdonhasbeenestablishedforover50years.
• WehavebeensupplyingShelterstoanextensive portfolio of satisfied customers for over 30 years.
• Theexperiencewehavegained,combinedwithour policy of ongoing product development to meet the demands of our customers, means that today’s products have evolved and stood the test of time.
Product Development• AllGlasdonproductsaredesignedandbuilttoISO9001QAstandards.
• Newproductsarecertifiedbystructuralstabilityandstressanalysisasappropriate.
• Manyproductsfeatureenhancedsecurityfeaturestodeterpotentialthieves.
• Ourtopqualitycorrosion-resistantfinishesretaintheirpristineappearancefor many years and help to reduce maintenance costs.
Company Accreditation
Health & Safety• Goodhealth&safetypracticesarevitalthroughoutallaspectsofourbusiness. Our high working standards have been recognised by approval from the CHAS scheme.
• AllGlasdonsitestaffareCSCScardholders,withvariousoperativesandsupervisors also carrying a safety passport as regulated by the CCNSG.
Groundworks• Weofferagroundworksserviceforthosecustomerswhorequire the installation of a concrete base as part of a complete package.
Choice• Anextensivechoiceoftraditionalandcontemporarystylestosuitany environment.• Variousproductsareavailableinkitformtosuitsiteswithrestrictedaccess.• Non-standardcoloursarenormallyavailableforco-ordinationwith corporate themes.
Customer Service• Aprompt,courteousandefficientservicefromourinternalandexternal sales teams.
• FreesitesurveysandCADdrawingsareavailabletohelpyoufindtheright solution for your project.
• Ourin-houseTechnicalDepartmentprovidessupportfromthespecification stage through to site installation.
• Ourfleetofcrane-equippedvehiclesensures safe delivery and offloading.
• Acomprehensiveafter-salesserviceprovidesour customers with peace of mind.
Index 5-6 Bi-Store™
Shelters with Quadrant Ends
32-35 Carleton™
Waiting Shelters
36-39 Heritage Waiting Shelters
40-41 Modus™
Budget Beating Shelters
42-43 Zone™
Multi-Purpose Shelters
44-47 Carleton 50™
Smoking Shelters
48-49 Carleton™ Canopy Wall Mounted Canopies
50-51 Eclipse™ Canopy Wall & Post -Mounted Canopies
7-8 Corral™
Compounds with Gates
9-11 Bi-Rak™
Cantilever Shelters
12-13 Bi-Port™
Cantilever Canopy Shelters
14-15 Midi Bi-Minder™
Cycle Storage Canopy
16-17 BikeZone™
One-Piece Moulded Shelters
18 Bi-Shelter™
Enclosed Shelters
19 Bi-Safe™
Enclosed Shelters with Gates
20-23 Bikeminder®
Bicycle Lockers
24-27 Bi-Stander™
Bicycle Hoops & Stands
28-29 Cyclone™
Bicycle Stands
30 CyclePad™
Bicycle Stands
31 Cyclemaster™
& Cycleguard™
Bicycle Parking Bollards
Cycle Storage Other Shelters
www.glasdon.ie 5
Bi-Store™
Shelters with Quadrant Ends
transparent cladding option for improved security surveillance....
The contoured styling of Bi-Store makes it a perfect choice for any environment be it industrial, commercial, urban or rural.
Its steel framework is post-finished with a high-quality and corrosion-resistant Armortec® coating. This produces a pristine finish which lasts for years with minimal maintenance.
The shelter cladding is offered in profiled plastic-coated steel or, for locations where security surveillance is important, clear thermoplastic glazingcanprovideapracticalsolution.Weatherprotectionforcyclescanbe enhanced with optional cladding to the end panel frames.
Offered in a choice of models featuring front wheel rings for semi-secure areas and hoops for improved security, Bi-Store shelters are normally delivered as pre-assembled structures and offloaded ready for immediate base fixing by our customers. Your prepared concrete base should be a minimum thickness of 200mm on to hardcore.
Kit form delivery is also available, with site assembly by Glasdon at additional cost, to overcome the challenge of restricted site access.
Technical InformationCOLOURSFRAMEWORK GreyBS4800(00.A.09) Green RAL 6005 Red RAL 3020 BlackRAL9005Alternative colours are available upon request at additional cost.
CLADDINGPlastic-coated steelThe weather-face is available in a choice of: nearest equivalent OceanBlue BS4800(18.C.39) GoosewingGrey BS4800(10.A.05)
Alternative colours are available at additional cost. The reverse-face is always light grey.ThermoplasticClear.
CONSTRUCTIONFRAMEWORKArmortec® coated steel.
CLADDINGPlastic-coated steelProfiled, hot-dipped galvanised steel panels with an embossed plastic coating to the weather-face and a protective paint finish to the reverse-face.Thermoplastic4mm high-impact thermoplastic glazing.Protects against UVA and UVB radiation.
DELIVERYIn assembled form for installation by our customers. Alternatively, in kit form for site assembly and installation by Glasdon at additional cost.
INSTALLATIONBi-Store Shelters are supplied ready for immediate surface fixing on to concrete using the expanding anchor bolts supplied.The minimum base size required is 3800 x 2400mm. The prepared concrete base should be flat, level and a minimum thickness of 200mm on to hardcore.
Specifying1. Decide whether bicycles or motorcycles are to be stored. 2. Wheretherequirementistoprovidebicyclestoragefacilities, select either the ring or hoop versions. Models RH601 and RG651 will accommodate up to 4 motorcycles.3. Specify the type of cladding required, i.e. plastic-coated steel or clear thermoplastic.4. Specify optional end cladding panels if required.5. Specify the weather-face colour required for plastic-coated steel, i.e. blue or grey.
DimensionsSIDE ELEVATION
2430
1750
1870
750
2230
240
8 PLACE HOOPS for Standard Bicycles
FRONT ELEVATION
240
3682
876
Models
SHELTER ONLY 5 PLACE RINGSfor Standard Bicycles
8 PLACE HOOPSfor Standard Bicycles
10 PLACE RINGSfor Standard Bicycles
HOOPSBicycle Shelters with hoops, which allow the frame and both wheels to be secured using proprietary security devices for maximum theft-protection in any situation.
Plastic-coated steel MODEL RH601 MODEL RH615 MODEL RH628 MODEL RH630 Clear thermoplastic MODEL RG651 MODEL RG665 MODEL RG678 MODEL RG680
RINGSBicycle Shelters with front wheel rings, which are extremely popular for use in semi-secure areas.
MODEL REFERENCES WITH CLADDING OPTIONS
Optional FeaturesDIMENSIONS
1780
2230
650
END CLADDING PANELS Plastic-coated steel Clear thermoplastic Extra weather protection can be provided to each of the standard models by the addition of cladding panels to either one or both ends of the shelter.
Usually within 4-6 weeks of order.
Availability
SHELTER ONLYShelters with no racking, which are ideal for motorcycle storage.
6 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Bi-Store - Shelters with Quadrant Ends
www.glasdon.ie 7
Corral™
Compounds with GatesThe modular design of our Corral Compounds makes them an ideal choice for larger capacity cycle parking areas. Made by linking individual shelters together to form a secure compound, the system offers infinite possibilities for both size and layout.
Enhanced security is provided at the end of each compound by vertically-barred gates and panels with a padlock facility.
Cladding is available in plastic-coated profiled steel or, for locations where security surveillance is important, clear thermoplastic glazing can provide a practical solution.
The steel framework, panels and gates are post-finished with an Armortec® coating to produce a pristine finish which lasts for years with minimal maintenance.
modular design for infinite choice in size and layout....
Corral Compounds are normally delivered as individual pre-assembled shelters and offloaded ready for bolting together and base fixing by our customers. Your prepared concrete base should be a minimum thickness of 200mm on to hardcore.
8 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Technical InformationCOLOURSFRAMEWORK AND GATES GreyBS4800(00.A.09) Green RAL 6005 Red RAL 3020 BlackRAL9005Alternative colours are available upon request at additional cost.
CLADDINGPlastic-coated steelThe weather-face is available in a choice of: nearest equivalent OceanBlue BS4800(18.C.39) GoosewingGrey BS4800(10.A.05)
Alternative colours are available at additional cost. The reverse-face is always light grey.ThermoplasticClear.
CONSTRUCTIONFRAMEWORK AND GATESArmortec® coated steel.CLADDINGPlastic-coated steelProfiled, hot-dipped galvanised steel panels with an embossed plastic coating to the weather-face and a protective paint finish to the reverse-face.Thermoplastic4mm high-impact thermoplastic glazing.Protects against UVA and UVB radiation.
DELIVERYIn assembled form for installation by our customers. Alternatively, in kit form for site assembly and installation by Glasdon at additional cost.
INSTALLATIONCorral Compounds are supplied as individual pre-assembled shelters ready for bolting together and surface fixing on to concrete using the expanding anchor bolts supplied. The prepared concrete base should be flat, level and a minimum thickness of 200mm on to hardcore.The minimum base size required will vary according to the layout of the compound - please refer to our sales office for more information.
1. Decide upon the number of bicycles and motorcycles to be stored. 2. Wheretherequirementisto provide bicycle storage facilities, select either the ring or hoop versions. Models LH601 and LG651 will accommodate up to 4 motorcycles.3. Corral Compounds are specified with a minimum of 2 individual shelters being positioned front-to- front. The total quantity of shelters should always be in a multiple of 2.4. Specify the type of cladding required, i.e. plastic-coated steel or clear thermoplastic.4. Specify optional end cladding and roof link panels as required.5. Select optional vertically-barred gates and panels as required.6. Specify the weather-face colour required for plastic-coated steel, i.e. blue or grey.
Models
HOOPSBicycle Shelters with hoops, which allow the frame and both wheels to be secured using proprietary security devices for maximum theft-protection in any situation.
Plastic-coated steel MODEL LH601 MODEL LH615 MODEL LH628 MODEL LH630 Clear thermoplastic MODEL LG651 MODEL LG665 MODEL LG678 MODEL LG680
MODELS WITH CLADDING OPTIONS
SHELTER ONLY 5 PLACE RINGSfor Standard Bicycles
8 PLACE HOOPSfor Standard Bicycles
10 PLACE RINGSfor Standard Bicycles
Optional FeaturesSIDE ELEVATION
1780
2230
650END CLADDING The addition of cladding panels to either one or both ends of the compound can provide extra weather protection and security. Available in plastic-coated steel or clear thermoplastic.
SIDE ELEVATIONGATESThe addition of vertically-barred single gates and infill panels to either one or both ends of the compound provides extra security. The gates have a padlock facility.
Specifying
RINGSBicycle Shelters with front wheel rings, which are extremely popular for use in semi-secure areas.
SHELTERS ONLYShelters with no racking, which are ideal for motorcycle storage.
Dimensions
FRONT ELEVATION8 PLACE HOOPS
for Standard Bicycles
240
3682
876
Usually within 4-6 weeks of order.
Availability
2400
6501750
2215
1400 2400
1400
6200
650 1750
212
ROOF LINKThe roof link panel offers additional weather protection and security by linking the opposite sides of the shelter. Available with clear thermoplastic glazing.
ROOFLINK
Corral - Compounds with Gates
www.glasdon.ie
Bi-Rak Shelters are regularly specified in the industrial, commercial, architectural and public service markets to satisfy cost, appearance and service-life criteria.
Site installation time is kept to a minimum as Bi-Rak Shelters are conveniently delivered in one-piece and offloaded with vehicle crane for immediate installation by our customers.
Shelters are available in standard colour schemes of grey frames with blue or grey cladding. They are also available to special order at additional cost with other cladding and frame colours to co-ordinate with corporate themes.
robust and structurally certified design with a proven track record...
HIGH VOLUME STORAGEBi-Raks can be linked together to provide larger storage facilities for high volume sites.
9
Bi-Rak™
Cantilever SheltersBi-Rak is widely considered to represent the benchmark by which other cycle shelters are judged. With a robust and structurally-certified design, it has been used successfully for 25 years in urban, rural and industrial environments.
Robust steel framework and cladding are protected by an Armortec® coating that helps to prevent corrosion and eliminates the need for costly painting and maintenance.
For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Models (With Roof Only)
BK201
SHELTER ONLY
BK215
5 PLACE RINGSfor Standard Bicycles
BK237
7 PLACE RINGS for Postal Bicycles
BK248
8 PLACE HOOPSfor Standard Bicycles
BK226
6 PLACE RINGSfor Postal Bicycles
BK250
10 PLACE RINGSfor Standard Bicycles
Models (With Roof & Back)
BC302
SHELTER ONLY
BC325
5 PLACE RINGSfor Standard Bicycles
BC347
BC358
7 PLACE RINGS for Postal Bicycles
8 PLACE HOOPSfor Standard Bicycles
BC336
6 PLACE RINGSfor Postal Bicycles
BC360
10 PLACE RINGSfor Standard Bicycles
HOOPSBicycle Shelters with hoops, which allow the frame and both wheels to be secured using proprietary security devices for maximum theft-protection in any situation.
RINGSBicycle Shelters with front wheel rings, which are extremely popular for use in semi-secure areas.
SHELTER ONLYShelters with no racking, which are ideal for motorcycle storage.
Variations
Base Fixing
Alternative fixing method
Bi-Rak Shelters can also be supplied with extended legs for setting below ground into concrete pockets.
An additional cost applies to this option.
Bi-Rak Shelters are supplied as standard with base plates for surface fixing on to concrete using expanding anchor bolts.The minimum base size required is 3800 x 2400mm. The base should be flat, level and a minimum thickness of 200mm concrete on to hardcore.
2230
695
1116 20
86
275
1650
750
90
1016200
2230
2150
695
1116 20
86
200
275
500
750
450
725
90
1650
Optional Features
END PANELS Extra weather protection can be provided to each of the standard models by the addition of a cladding panel to either one or both ends of the shelter.
2230
1895
275
2086
DIMENSIONS CAPPING STRIPSForlayoutswheretwoormoresheltersarelinked to form a continuous run, an external cladding capping strip is available to cover the joint between each shelter. Capping strips are supplied loose for installation by our customers.
Bi-Rak - Cantilever Shelters
10
www.glasdon.ie
DimensionsSpecifying1. Decide whether bicycles or motorcycles are to be stored. Models BK201 and BC302 will accommodate up to 4 motorcycles.2. Wheretherequirementistoprovidebicycle storage facilities, select either the ring or hoop versions. The 6 and 7 place ring versions(BK226,BK237,BC336andBC347) are designed to accommodate Postal Service bicycles.3. Decide whether a shelter with roof only is required from models BK201 - BK250, or whether the additional protection offered by the roof and back of models BC302 - BC360 is desirable.4. Specify optional end panels and capping strips as required.5. Specify the weather-face cladding colour required, i.e. blue or grey.
Technical InformationCOLOURSFRAMEWORK Grey BS4800(00.A.09) Green RAL 6005 Red RAL 3020 Black RAL9005Alternative colours are available upon request at additional cost.
CLADDINGThe weather-face is available in a choice of: nearest equivalent OceanBlue BS4800(18.C.39) GoosewingGreyBS4800(10.A.05)
Alternative colours are available at additional cost.The reverse-face is always light grey.
CONSTRUCTIONFRAMEWORKArmortec® coated steel.
CLADDINGProfiled, hot-dipped galvanised steel panels with an embossed plastic coating to the weather-face and a protective paint finish to the reverse-face.
DELIVERYDelivered in assembled form for installation by our customers.
Installation
Bi-Rak Shelters are supplied ready for immediate surface fixing on to concrete using the expanding anchor bolts supplied.The minimum base size required is 3800 x 2400mm. The base should be flat, level and a minimum thickness of 200mm concrete on to hardcore.
Availability
Usually within 4-6 weeks of order.
SIDE ELEVATIONS FRONT ELEVATIONS
6 PLACE RINGS for Postal Bicycles
8 PLACE HOOPS for Standard Bicycles
10 PLACE RINGS for Standard Bicycles
3670
590
275
200
3670
87527
520
0
2230
695
1116 20
86
275
200
1016
90
2230
695
1116 20
86
275
200
1016
90 3670
275
200
300
Bi-Rak - Cantilever Shelters
2230
695
1116 20
86
275
1650
750
90
1016200
11
Bi-Port Shelters offer the ultimate in contemporary design and are ideally suited to ‘front of house’ and high profile locations.
The impressive steel framework is post-finished with an Armortec® coating. The end result is a gloss coating that maintains its pristine look over many years and helps to prevent corrosion.
contemporary shelter for high profile locations....
Offered with a standard frame colour choice of grey, green, red and black, any other colours from the BS or RAL ranges can be selected at additional cost to achieve co-ordination with your corporate theme or existing architecture. The canopy cladding is clear thermoplastic glazing.
Bi-Ports are delivered to site as pre-assembled shelters and offloaded with a vehicle crane ready for immediate base fixing by our customers. Your prepared concrete base should be a minimum thickness of 200mm on to hardcore.
12 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Bi-Port™
Cantilever Canopy Shelters
Technical InformationCOLOURSFRAMEWORK GreyBS4800(00.A.09) Green RAL 6005 Red RAL 3020 BlackRAL9005Alternative colours are available upon request at additional cost.CLADDING
ThermoplasticClear.
CONSTRUCTIONFRAMEWORKArmortec® coated steel.
CLADDINGThermoplastic4mm high-impact thermoplastic glazing. Protects against UVA and UVB radiation.
DELIVERYDelivered in assembled form for installation by our customers.
INSTALLATIONBi-Port Shelters are supplied ready for immediate surface fixing on to concrete using the expanding anchor bolts supplied.The minimum base size required is 4300 x 2400mm. The prepared concrete base should be flat, level and a minimum thickness of 200mm on to hardcore.
Dimensions
Models
Usually within 4-6 weeks of order.
Availability 8 PLACE HOOPS for Standard Bicycles
FRONT ELEVATION
2585
3864
876
2480
SIDE ELEVATION
187075
0
2585
8 PLACE HOOPS for Standard Bicycles
SHELTER ONLY 8 PLACE HOOPSfor Standard Bicycles
HOOPSBicycle Shelters with hoops, which allow the frame and both wheels to be secured using proprietary security devices for maximum theft-protection in any situation.
MODEL PG551 MODEL PG578
SHELTER ONLYShelters with no racking, which are ideal for motorcycle storage.
Specifying
1. Decide whether bicycles or motorcycles are to be stored. Models PH501 and PG551 will accommodate up to 4 motorcycles.2. Specify the frame colour required, i.e. grey, green, red or black.
www.glasdon.ie 13
Bi-Port - Cantilever Canopy Shelters
The compact footprint of Midi Bi-Minder makes it more suitable for installation in smaller spaces than other types of shelter.
Midi Bi-Minder is easy to install, with minimal costs. Delivered on a pallet, shelters can be easily moved with a pallet truck or fork lift truck. The smallsizeandlowweightalsomeansthatnocranageisrequiredduringinstallation.Groundfixings(plustamper-resistantcovercaps)aresuppliedfor installation on to a concrete base.
The 2 metre Durapol® hood offers excellent weather protection and the low profile design will withstand high winds. The open design of Midi Bi-Minder provides good visual security, as bicycles can be seen from all angles. The corrosion-resistant Armortec®-coated steel frame incorporates a cycle frame shaped locking stand, which allows the bicycle frame and both wheels to be secured.
An incredibly cost effective and flexible solution for cycle storage...
New Midi Bi-Minder is an incredibly cost effective and flexible solution for cycle storage. Each shelter accommodates 2 bicycles, so you only buy the shelter space you need. Additional shelters can be installed to increase capacity when required.
14 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Midi Bi-Minder™
Cycle Storage Canopy
An incredibly cost effective and flexible solution for cycle storage...
Technical InformationCOLOURSHOOD
FRAMEDark Grey
CONSTRUCTIONHOOD: Durapol®
CYCLE HOOPS & RINGS: Armortec® coated mild steel
WEIGHTMIDI BI-MINDER SHELTER:59kg
INSTALLATIONMidi Bi-Minder Shelters are supplied in fully assembled form ready for immediate surface fixing on to concrete using the expanding anchor bolts supplied.The minimum base size required is 1610 x 1350mm. The prepared concrete base should be flat, level and a minimum thickness of 200mm on to hardcore.It is recommended that Midi Bi-Minder Shelters are permanently sited and fixed down to your prepared concrete base at the time of delivery. If installation does not take place immediately, suitable storage arrangements must be made to prevent damage from adverse weather conditions or other influences.
RedRAL 3020
Dark BlueRAL 5003
Dark GreyRAL7009
Cool GreyRAL 7038
BlackRAL9010
Dimensions1160
740
1980
1000 fixing centres
Ø42.4
1050
1210 fixing centres
1400
1005
1950 20
00
Optional ExtrasCYCLE PARKING SIGNAGEAvailable as a vinyl sticker or thermoplastic sign.
Supplied affixed to sign recess on the front underside of the hood.
Alternative signage can be supplied. Please contact our Sales Office for more information.
Usually within 3-4 weeks of order.
Availability
www.glasdon.ie 15
Midi Bi-Minder - Cycle Storage Canopy
The exciting new Zone system from Glasdon redefines the traditional concept of how a shelter should look. Its sleek styling and cantilevered one-piece design offer a unique and dynamic solution for cycle parking.
cantilevered one piece design with sleek styling....
BikeZone is designed to meet the exacting demands of today’s cyclists and is equally at home in an industrial, commercial, public service or architectural setting.
Its curved shape provides excellent weather protection for all kinds of cycles.
A floor-mounted stand with front wheel rings accommodates up to 5 bicycles whilst each hoop stand allows 2 bicycles to be secured. Stands and hoops can be purchased as separate items.
Cycle Hoops
Cycle Rings
16 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
BikeZone™
One-Piece Moulded Shelters
Technical InformationCOLOURSSHELTER
CYCLE HOOPS & RINGSGrey(asstandard)BS4800(00.A.09)
CONSTRUCTIONSHELTER: Durapol®
CYCLE HOOPS & RINGS: Armortec® coated mild steel
WEIGHTSHELTER: 160kg CYCLE RINGS: 12kg CYCLE HOOPS: 19.5kg
INSTALLATIONBikeZone Shelters are supplied as one-piece mouldings ready for immediate surface fixing on to concrete using the expanding anchor bolts supplied.The minimum base size required is 2500 x 2500mm. The prepared concrete base should be flat, level and a minimum thickness of 200mm on to hardcore.Adequate space must be available behind the shelter to allow access to the rear fixing points.It is recommended that BikeZone Shelters are permanently sited and fixed down to your prepared concrete base at the time of delivery. If installation does not take place immediately, suitable storage arrangements must be made to prevent damage from adverse weather conditions or other influences.
Grey
Models
MODEL BZ1A Shelter with no rings or hoops, which is ideal for motorcycle storage.
5 PLACE RINGSFront wheel bicycle rings, which are extremely popular for use in semi-secure areas.
HOOPSBicycle hoops, which allow the frame and both wheels to be secured using proprietary security devices for maximum theft-protection in any situation.
SHELTER ONLY 5 PLACE RINGS
2 PLACE HOOP
5 PLACE RINGS
2 PLACE HOOP
STANDS ONLYMODEL
BZ5
MODEL BZ6
MODEL BZ1
MODELBZ2
MODELBZ3
4 PLACE HOOPS
MODELBZ4
Dimensions
BIKE
ZON
E SH
ELTE
R
CYCL
E RI
NGS
CYCL
E HO
OPS
1612
763
990
1612
763
990
1550 560
600
6030 30
635
335
990
1612
763
2190
2300
2010 Front Hole Centres1938 Rear Hole Centres 1248 Hole Centres
2358
WHITE OUTLINE drawing below
1612
763
990
1612
763
990
1550 560
600
6030 30
635
335
990
1612
763
2190
2300
2010 Front Hole Centres1938 Rear Hole Centres 1248 Hole Centres
2358
WHITE OUTLINE drawing below
600
30 30
1550 560
635
335
1612
763
990
1612
763
990
1550 560
600
6030 30
635
335
990
1612
763
2190
2300
2010 Front Hole Centres1938 Rear Hole Centres 1248 Hole Centres
2358
WHITE OUTLINE drawing below
1612
990
763
2190
2300
2010FrontHoleCentres1938RearHoleCentres
2358
1248 Hole Centres
Usually within 3-4 weeks of order.
Availability
www.glasdon.ie 17
BikeZone - One-Piece Moulded Shelters
Technical InformationCOLOURSSHELTERThe weather-face of the panels is available in a choice of: nearest equivalent OceanBlue BS4800(18.C.39)VandykeBrown BS4800(08.B.29)
TherooftrimsaregreyBS4800(10.A.05)Alternative colours are available at additional cost.The reverse-face of the panels is always light grey.
BICYCLE STAND GATE (BI-SAFE ONLY)GreyBS4800(00.A.09). Greygalvanised.
CONSTRUCTIONSHELTERProfiled, hot-dipped galvanised steel panels with an embossed plastic coating to the weather-face and a protective paint finish to the reverse-face.
BICYCLE STANDArmortec® coated steel.
GATE (BI-SAFE ONLY)Galvanised steel vertically-barred double gate with padlock facility.
BL435
5 PLACE RINGS
for Standard Bicycles
BL403
Shelter Only
BL446
6 PLACE RINGS
for Postal Bicycles
BL457
7 PLACE RINGS
for Postal Bicycles
BL468
8 PLACE HOOPS
for Standard Bicycles
BL470
10 PLACE RINGS
for Standard Bicycles
RINGSBicycle Shelters with front wheel rings which are extremely popular for use in semi-secure areas.
Dimensions
1970
2200
190
60
SIDE ELEVATION
SHELTER ONLYShelters with no racking which are ideal for motorcycle storage.
ModelsWIDE CHOICEThe Bi-Shelter and Bi-Safe ranges consist of enclosed models with a choice of stands for the accommodation of standard and Postal Service bicycles. In addition, the shelter-only version provides space for up to 4 motorcycles.
LONG SERVICE LIFEThe plastic-coated steel panels and Armortec® coated steel stands help to prevent corrosion and achieve a long service-life without the need for costly painting and maintenance.
SIMPLE SELF ASSEMBLYBi-Shelter and Bi-Safe are always delivered in kit form for simple assembly by our customers.
18 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Bi-Shelter™
Enclosed Shelters
DELIVERYThe Bi-Shelter and Bi-Safe range are designed to be delivered in kit form for simple self-assembly by our customers.It is appreciated that some of our customers may not have facilities for site assembly and we will be pleased to quote for our site team to provide this service if required. Please contact our Sales Office on 1800 656 606 for details and prices.
INSTALLATIONThe minimum base size required is 4050 x 2250mm. Assuming no suitable existing surface, the base is to be a minimum thickness of 125mm concrete on to hardcore. The base should be flat, level and square, and preferably be raised slightly above the surrounding ground level.Base fixing is accomplished using the expansion bolts supplied. 10mm holes are to be drilled in the concrete base through pre-drilled holes in theshelterplinthtoaminimumdepthof90mm.
AvailabilityUsually within 4-6 weeks of order.
BS545
5 PLACE RINGS
for Standard Bicycles
BS504
Shelter Only
BS556
6 PLACE RINGS
for Postal Bicycles
BS567
7 PLACE RINGS
for Postal Bicycles
BS578
8 PLACE HOOPS
for Standard Bicycles
BS580
10 PLACE RINGS
for Standard Bicycles
HOOPSBicycle Shelters with hoops which allow the frame and both wheels to be secured using proprietary security devices for maximum theft-protection in any situation.
4000
2160
105
FRONT ELEVATION
EXTRA SECURITYTo further combat the ever-increasing problem of cycle theft, Bi-Safe models have a double gate with padlock facility.
COLOUR CO-ORDINATIONAlthough normally supplied in standard colour schemes of blue or brown, Bi-Shelter and Bi-Safe are also available to special order in other colours for co-ordination with corporate colours or existing architecture.
www.glasdon.ie 19
Bi-Safe™
Enclosed Shelters with Gates
With more people regularly using bicycles as a convenient and environmentally-friendly form of transport, secure bicycle storage facilities are essential at key locations such as the workplace, city centre sites and busy commuter links such as railway stations.
The Bikeminder range provides an ideal solution consisting of single bicycle lockers, which are available in various configurations to suit your particular site layout.
SECURE & EASY TO USEA single door leaf and lift-up access panel provide for easy manoeuvring of bicycles into and out of the locker. The door is fitted with a flush-fitting lock assembly and individual wheel security devices can be used with the guide rail as an additional security measure.
reinforced steel panel bicycle lockers for strength, security and user confidence...
IMPACT & FIRE RESISTANTMaintenance is kept to a minimum with the use of stainless steel components, Armortec® coated steel plinth and plastic-coated steel panels, which also provide a high level of fire-resistance. Impact-resistance is achieved with reinforcement to all door, roof and outer wall panels.
LOCK ASSEMBLY
BICYCLE GUIDE RAIL
20 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Bikeminder®
Bicycle Lockers
DOUBLE BIKEMINDER - STORE 2 BICYCLES PER LOCKERDouble Bikeminder lockers are fitted with doors at both ends and a diagonal partition to create two secure compartments within each locker. Double Bikeminder lockers are only slightly larger than the standard models, so as a result, more bicycles can be fitted into a smaller floor area.
Bicycles are manoeuvred into the locker in reverse i.e. rear wheel first.
‘VERTICAL’ MODELSForlocationswhichhavelimitedfloorspaceavailableorwhere pedestrian access is paramount, e.g. passenger transport terminals, our range of vertical Bikeminder models provides the solution. Constructed to the same high standard as the conventional Bikeminder designs, vertical models save on floor space by allowing bicycles to be easily manoeuvred into an almost vertical resting position in the guide rail with no risk of damaging the wheels.
OPEN GRILLE DOORA stainless steel open-grille door option is available to aid visual inspection by security personnel.
www.glasdon.ie 21
Bikeminder - Bicycle Lockers
Side-by-Side Models (availableashorizontalorverticalversion)
8 Bicycle Lockers6 Bicycle Lockers4 Bicycle Lockers2 Bicycle Lockers1 Bicycle Locker
HORIZONTAL MODELS WITH PLAN DIMENSIONS
BM1 765 x 1855mm
BM21510 x 1855mm
BM43000 x 1855mm
BM64490x1855mm
BM85980x1855mm
VERTICAL MODELS WITH PLAN DIMENSIONS
VBM1765 x 1400mm
VBM21510 x 1400mm
VBM43000 x 1400mm
VBM64490x1400mm
VBM8 5980x1400mm
Double Bikeminder Models (availableashorizontalversiononly)1 Locker
for 2 bicycles2 Lockers
for 2 bicycles3 Lockers
for 6 bicycles4 Lockers
for 8 bicycles
3500 o/a
MODELS WITH PLAN DIMENSIONS
DB21000 x 2000mm
DB42000 x 2000mm
DB63000 x 2000mm
DB84000 x 2000mm
1820
Side Elevation
35
1210
SIDE-BY-SIDE MODELS
1150
Clea
r Ope
ning
650Clear Opening
1615
min
imum
cle
aran
ce
Front Elevation
1740
Clea
r Ope
ning
650Clear Opening
VERTICAL MODELSFront Elevation
Side Elevation
1800
1400
DOUBLE BIKEMINDER MODELS
1930
Side Elevation
35
1210
1000Front Elevation
2000
750Clear Opening
Dimensions
Double Bikeminder - Plan View
22 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Bikeminder - Bicycle Lockers
Technical Information
COLOURSWall and Roof Panels Standard: nearest equivalent GoosewingGrey BS4800(10.A.05)Door Panel Standard choice of: nearest equivalent MerlinGrey BS4800(18.B.25) PoppyRed BS4800(04.E.53) Heritage Green RAL 6002 SolentBlue BS4800(18.E.53)
LOCKER CONSTRUCTIONComprising of stainless steel components, Armortec® coated steel plinth and hot-dipped galvanised steel panels with an embossed plastic coating.All door, roof and outer wall panels are reinforced to provide impact resistance.
DOORSingledoorleafandlift-upaccesspanel(foreasymanoeuvringofbicycle)areoutward opening only and fitted with continuous hinges.The single door leaf has a flush-fitting lock assembly with a folding handle and impact buffer.Locks can be suited upon request.A stainless steel open-grille door option is available to aid visual inspection by security personnel.
VENTILATIONProvided by a fixed ventilator positioned at low level in both the door leaf and the rear panel.
BICYCLE GUIDE RAIL (not fitted to Double Bikeminder)
A centrally-positioned Armortec® coated steel channel section at floor level along the full length of the locker.As an additional security measure, holes are provided at the door end of the bicycle guide rail to allow the user to fasten the wheel with their own locking device.
FIRE RATINGThe steel external skin conforms to BS 476 Part 7 Class 1.
WEIGHTTheapproximateweightofeachsinglelockeris98kg.
DELIVERYBikeminder lockers are delivered as fully assembled single units. Bolting together into their respective model configuration and base fixing is normally undertaken by our customers.
INSTALLATIONThe minimum base size for each model illustrated should be 50mm greater than the overall length and width shown.Assuming no suitable existing surface, the base is to be a minimum of 125mm concrete on to hardcore. The base should be flat, level and square and preferably be raised slightly above the surrounding ground level.Base fixing is accomplished using the expansion anchor bolts supplied. 10mm holes are to be drilled in the concrete base through pre-drilled holes in the locker plinthtoaminimumdepthof90mm.
Standard Door ColoursSpecifying1. Decide upon the number of bicycles to be stored.2. Select from the models illustrated, i.e. Side by Side or Double Bikeminder. Please note that side by side models are available as a horizontal or vertical version.3. Specify the colour required for the door panel.4. Specify optional open-grille to door as required.
Optional Feature
Usually within 4-6 weeks of order.
Availability
A stainless steel open-grille to the door to aid visual inspection by security personnel.
www.glasdon.ie 23
Bikeminder - Bicycle Lockers
Manufactured from Armortec® coated steel framework, the Bi-Stander range provides the ideal solution where uncovered bicycle parking facilities are required.
Available in a wall-mounted or ground-fixed format, the range offers a comprehensive choice of single and double-sided stands and hoops.
smooth Armortec® coating helps prevent damage to cycles...
24 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Bi-Stander™
Bicycle Hoops & Stands
GROUND-FIXEDDOUBLE-SIDED MODELS
GROUND-FIXEDSINGLE-SIDED MODELS
WALL-MOUNTED SINGLE-SIDED MODELS
SW15 5 PLACE RINGSfor Standard Bicycles
SW26 6 PLACE RINGSfor Postal Bicycles
SW37 7 PLACE RINGSfor Postal Bicycles
SW48 8 PLACE HOOPSfor Standard Bicycles
SW50 10 PLACE RINGSfor Standard Bicycles
SF25 5 PLACE RINGSfor Standard Bicycles
SF36 6 PLACE RINGSfor Postal Bicycles
SF47 7 PLACE RINGSfor Postal Bicycles
SF58 8 PLACE HOOPSfor Standard Bicycles
SF60 10 PLACE RINGSfor Standard Bicycles
SD212 12 PLACE RINGSfor Postal Bicycles
SD314 14 PLACE RINGSfor Postal Bicycles
SD416 16 PLACE HOOPSfor Standard Bicycles
SD52020 PLACE RINGSfor Standard Bicycles
HoopsBicycle Stands with hoops which allow the frame and both wheels to be secured using proprietary security devices for maximum theft-protection in any situation.
RingsBicycle Stands with front wheel rings which are extremely popular for use in semi-secure areas.
Bicycle Stand Models
Specifying1. Decide upon the number of bicycles to be stored.2. Decide if the wall-mounted or ground-fixed format is required.3. Select either the ring or hoop versions. The hoop versions provide scope for extra bicycle security. The 6, 7, 12 and 14 place ring versions are designed to accommodate Postal Service bicycles.
SD110 10 PLACE RINGSfor Standard Bicycles
www.glasdon.ie 25
Bi-Stander - Bicycle Hoops & Stands
Technical InformationCOLOURSGrey BS4800(00.A.09)Green RAL 6005Red RAL 3020Black RAL9005Alternative colours are available upon request at additional cost.
CONSTRUCTIONArmortec® coated steel.
DELIVERYIn assembled form for installation by our customers.TheexceptionsaremodelsSW48,SF58&SD416wherethehooplegsaresupplied loose ready for our customers to bolt to the frame (using the fixings supplied)priortowallmountingorgroundfixing.
INSTALLATIONWALL-MOUNTED MODELSFixthestandtothewallbyusingthe4no.10mmdia.pre-drilledholesinthewall brackets. Please note that fixings are not supplied as the requirements can vary dependent on the wall construction.
GROUND-FIXED MODELS Fixthestandtoasuitableflatsurface,eg.125mmthickconcrete.Basefixingis accomplished using the expansion bolts supplied. 10mm holes are to be drilled in the concrete base through pre-drilled holes in the base plates to a minimum depth of 100mm.
AvailabilityUsually within 3-4 weeks of order.
Dimensions
Ground-fixed single & double-sided models
Wall-mounted single-sided models
350
ModelSW15
350
ModelsSF25&SD110
650
350
3567
ModelSW50
35065
0
ModelsSF58&SD416
3755
35065
0
ModelsSF60&SD520
FRONT ELEVATIONS
Ground-fixed double-sided models
Ground-fixed single-sided models
SIDE ELEVATIONS
ModelSF58
1650
ModelSF60
550
183
Model SD520
1050
334
650
Base Fixing Detail
50
200
130
200 sq. Plate
4no. 10mmdia. holes
100mm x 50mm R.H.S.
75
100
1no. 10mmdia. holes
Stanchion Leg to all Ground-fixed Models
Hoop Leg to Models SW48, SF58 & SD416
26 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Bi-Stander - Bicycle Hoops & Stands
SH2
SH3
SH4
750
750
5 14
5 20
0 40
0 750
750
5 14
5 20
0 40
0
750
650 5050
750
50695
5
SH2
SH3
SH4
750
750
5 14
5 20
0 40
0
750
750
5 14
5 20
0 40
0
300
700
1050
750
650 5050
50
Model SH2ASurface fixing to concrete
Model SH2B Sinking into concrete pockets
Model SH3ASurface fixing to concrete
Model SH3B Sinking into concrete pockets
Model SH4ASurface fixing to concrete
Model SH4B Sinking into concrete pockets
FRONT ELEVATION SIDE ELEVATION
MODEL SH2Ground-fixed hoop
MODEL BZ55 place bicycle stand with front wheel rings
MODEL SH3Ground-fixed hoop c/w tapping bar
MODEL SH4Ground-fixed hoop c/w tapping bar & signage
COLOURSMid grey as standard.Alternative colours available subject to a minimum order quantity.
CONSTRUCTIONArmortec® coated mild steel.
PLAN VIEW
MODEL BZ6Ground-fixed angled hoop
SIDE ELEVATION
COLOURSMid grey as standard.Alternative colours available subject to a minimum order quantity.
CONSTRUCTIONArmortec® coated mild steel.
STANDARD MATERIALSModels SH2, SH3 AND SH4• Option 1 Silver galvanised steel.• Option2 Armortec® coated steel in colour choice of: Grey BS4800(00.A.09) Green RAL 6005 Red RAL 3020 Black RAL9005. Alternative colours are available upon request at additional cost.• Option3 Naturalbrushedsatinstainlesssteel(316grade).
DELIVERYAll ModelsIn assembled form for installation by our customers.
INSTALLATIONAll ModelsFixthestandtoasuitableflatsurface,eg.125mmthickconcrete.Basefixing is accomplished using the expansion bolts supplied. 10mm holes are to be drilled in the concrete base through pre-drilled holes in the base plates to a minimum depth of 100mm.
Technical Information
300
1050
SH2
SH3
SH4
750
750
5 14
5 20
0 40
0
750
750
5 14
5 20
0 40
0
SH2
SH3
SH4
750
750
5 14
5 20
0 40
0
750
750
5 14
5 20
0 40
0
750
650 5050
50
750
650 5050
750
5035
05
200
145
350
200
145
300
1050
SH2
SH3
SH4
750
750
5 14
5 20
0 40
0
750
750
5 14
5 20
0 40
0
SH2
SH3
SH4
750
750
5 14
5 20
0 40
0
750
750
5 14
5 20
0 40
0
750
650 5050
50
750
650 5050
750
5035
05
200
145
350
200
145
1612
763
990
1612
763
990
1550 560
600
6030 30
635
335
990
1612
763
2190
2300
2010 Front Hole Centres1938 Rear Hole Centres 1248 Hole Centres
2358
WHITE OUTLINE drawing below
600
30 30
1550 560
635
335
1612
763
990
1612
763
990
1550 560
600
6030 30
635
335
990
1612
763
2190
2300
2010 Front Hole Centres1938 Rear Hole Centres 1248 Hole Centres
2358
WHITE OUTLINE drawing below
1612
990
763
AvailabilityAll models usually within 3-4 weeks of order.
www.glasdon.ie 27
Bi-Stander - Bicycle Hoops & Stands
The self-coloured Durapol® base plinth allows for a choice of either a stainless steel or Armortec® coated hoop for storing two bicycles.
Each plinth is filled with sand ballast for extra weight to help prevent any unauthorisedmovement.Foraddedsecurity,concealedfixingpointsallowforpermanently bolting down to a concrete base or pavings.
Cyclone has been designed with a wedge shaped base plinth, which allows for the formation of various layouts. Tamper-resistant linking brackets are used for securing each Cyclone stand together.
wedge shape base plinth allows for formation of different layouts...
Cyclone is a unique cycle stand that needs no groundwork and is ready to use in minutes.
28 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Cyclone™
Bicycle Stands
Dimensions
830
1241868
820
Ø38mm
Note: the leading edge of a Cyclone base plinth should always be positioned at least 400mm away from any existing wall or structure to give sufficient room for the bicycle wheel.
Example Layouts
Linear 6 stands
Circle12 stands
Semi-Circle6 stands
Curve6 stands
Technical InformationCOLOURSBASE PLINTH
HOOPAnthracite Grey or Stainless Steel
CONSTRUCTIONBASE PLINTH: Durapol®
CYCLE HOOP: Armortec® coated mild steel or Stainless steelFIXINGS COVER PLATE: Stainless steel WEIGHTWithout sand ballast: 15kgWith sand ballast: 92kg
INSTALLATIONCyclone Stands are delivered as individual units (ready filledwithsandballast)foroffloadingbyGlasdon.Subject to adequate access on site, Glasdon can usually manoeuvre each Cyclone to its final location at the time ofdelivery.Fittingoflinkingbracketsandbasefixingetc. is then undertaken by our customers.
Millstone Sandstone906
2408
2408
1241 1035 1035
1035
953
AvailabilityUsually within 3-4 weeks of order.
www.glasdon.ie 29
Cyclone - Bicycle Stands
Dimensions
700
848
997
843
Wall
SIDE ELEVATION FRONT ELEVATION
PLAN VIEW
The approximate weight of a CyclePad is 140kg
700 Repeat
700 Repeat
550
Technical InformationCOLOURSHOOPNatural brushed satin stainless steel or grey Armortec® coating.BASE PLINTHGranite-effect surface with grey borders.
CONSTRUCTIONHOOP50mmtubularstainlesssteel(316grade)orArmortec® coated steel.BASE PLINTHAggregate-finish concrete with curved shape to facilitate positioning side by side as a continuous run of individual pads.
WEIGHTThe approximate weight of a CyclePad is 140kg.
DELIVERYCyclePads are always delivered as individual pads for offloading by Glasdon. Subject to adequate access on site, Glasdon can usually manoeuvre each CyclePad into the final site location at the time of delivery.
INSTALLATIONCyclePads are free-standing and self-supporting structures which are suitable for positioning on any flat and even surface, e.g. tarmac, concrete slabs,blockpavingetc.WhereamultiplequantityofCyclePadsispositioned side by side in a continuous run, the hoops can be front or back facing. A concealed locking bar system is used to securely connect each CyclePad.
All of the best ideas are simple and CyclePad* falls firmly into this category. It offers a revolutionary design which reduces the time and cost of site installation to the absolute minimum.
It is particularly suited to street furniture applications because there is no need to excavate and re-lay existing ground surfaces such as blockpaving or concrete. If your site layout changes in the future then CyclePad can be simply moved with lifting aids and relocated as required.
Each CyclePad is manufactured and delivered to site as a ready-made freestanding concrete plinth complete with a single hoop in stainless steel or Armortec® coated steel. The contoured shape of the concrete plinth allows each CyclePad to be easily manoeuvred and interlinked together in a continuous line to form your desired layout. A concealed locking bar system is provided for improved security.
The standard concrete plinth is offered in a grey granite-effect finish, although other colours are available upon request for co-ordination with the surrounding architecture. Being manufactured from high-quality and maintenance-free materials, CyclePad will provide years of trouble-free service.
*CyclePad is a Registered EU Design
*Note: The front or rear leading face of a CyclePad base plinth should always be positioned at least 550mm away from any existing wall or structure.
30 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
CyclePad™
Bicycle Stands
Availability
Usually within 4-6 weeks of order.
Models
CYCLEMASTER/CYCLEGUARD•WithMillstone,SandstoneorGraniteBollardHead•WithBlackBollardHead•AchoiceofDecorativeBandingorReflectiveBandingatadditionalcost.
Dimensions
Anchor Bar 100mm(minimum)thickness gravel
Concrete
Block Paving(65mmthick)
30mm Thickness
Clean Sharp Sand30
0900
Technical InformationCOLOURS OPTIONAL FEATURESHEAD OF BOLLARD DECORATIVE REFLECTIVE Choice of: BANDING BANDING Choice of:
LEGS: dark grey
Black Millstone
Sandstone Granite Gold White Red Red/White
CONSTRUCTIONHEAD OF BOLLARD: Durapol® polyethylene.BANDING: Reflective option in white, red or red/white is to Class BS873 Part 6.LEGS: Armortec® coated mild steel tubular sections.
DELIVERY AND INSTALLATIONIn assembled form for installation by our customers.
Cyclemaster & Cycleguard are two high-quality bollards which offer secure cycle parking facilities within any cycle infrastructure, place of employment and town centre location.
The versatility of individual bollards means that they can be positioned to suit the available space in any environment. Two cycles can be locked parallel on either side of each bollard.
Each bollard is manufactured from durable materials and a cycle logo is incorporated on both sides.
CYCLEGUARDOffers a straight-legged style ideal for narrow locations. The slim yet robust design allows a number of different types of cycle lock to be used with ease.
CYCLEMASTERFeaturesawidetubularleg configuration which allows the frame and both wheels of the cycle to be securely and easily locked.
Availability
Usually within 3-4 weeks of order.
www.glasdon.ie 31
Cyclemaster™ & Cycleguard™
Cycle Parking Bollards
SELF-ASSEMBLY SHELTERSPatentnumberGB2429468
Formultipleroll-outprogrammes,remotelocationsandsites with restricted access, Carleton models up to a size of 3 bay x 1 bay with flat roofs can be supplied in self-assembly form for quick and simple assembly by our customers. Comprehensive assembly instructions and a DVD are provided.
www.glasdon.ie
Carleton™
Waiting Shelters
32
ARCHITECTURAL STYLEFeaturingthreedifferentroofstyles;flat,domedandpitched,CarletonShelters enhance any environment and complement modern architectural styles.
SIMPLE INSTALLATIONFullyassembleddeliveryassiststhepromptandsimpleinstallationofCarleton Shelters by our customers. They can either be base fixed using the adjustable spigoted legs to accommodate uneven ground surfaces or set below ground with the legs fully extended into concrete pockets.
AESTHETIC APPEALParish,TownandCountyCouncils;SchoolsandColleges;HealthandLocalAuthorities;TransportUndertakings,allspecifyfromtheCarletonrangetosatisfy aesthetic, functional and economic criteria.
MINIMAL MAINTENANCEManufactured from low-maintenance materials, the Carleton Shelter’s anodised or Armortec®-coated aluminium framework offers a high degree of corrosion resistance as well as eliminating routine painting requirements.
For public transport applications our range of Carleton Waiting Shelters can be adapted in size and configuration to meet the needs of disabled persons, particularly wheelchair users, in accordance with the relevant Department for Transport guidelines.
ROOF STYLES3 bay long x 1 bay wide Nominal Dimensions
3245mm long x 1115mm wide
2 bay long x 1 bay wide Nominal Dimensions
2180mm long x 1115mm wide
Model 225
Open FrontEntry
Model 230
FrontLeft and Right Side Entry
Model 235
FrontRightand Left Side Entry
Model 245
FrontRight Entry
Model 355
DoubleFrontEntry
Model 360
Staggered Entry
Model 240
FrontLeft Entry
Model 350
*Cantilever with half width sides
Model 220
*Cantileverwith half width sides
In assembled form and normally within 4 - 6 weeks of order. Flatroofmodelsuptoasizeof3bayx1baycanbesuppliedin‘Self-Assembly’ form.
*Cantilever models 220 & 350 are only suitable for setting below ground into concrete pockets.
Flat Roof
Domed Roof
Pitched Roof
Standard Models
Delivery
Specifying
ModelCF 245
Toughened Glass Upper&BlankLower
Toughened Glass Upper&BlankLower
Toughened Glass Upper
&LowerFlatRoof
Toughened GlassUpper&Lower
1115
1265
2330
2180
Toughened Glass Upper &Lower
Personalised Crest
Timetable
1. Select the model which best suits the application, eg. 2 bay with front right entry - model 245.2. Select the roof style required. All Carleton flat roof models up to 3 bay x 1 bay can be supplied in ‘Self-Assembly’ form. Comprehensive assembly instructions are provided.3. Specify whether the shelter is: a) Framewithtoughenedglassupperandlowerpanels. b) Framewiththermoplasticglazedupperandlowerpanels. c) Framewithtoughenedglassupperandblanklowerpanels. d) Framewiththermoplasticglazedupperandblanklowerpanels. e) Framewithanycombinationofglass,thermoplasticandblank upper and lower panels.4.Selectthecolourscheme(ifrequired).5. Carleton shelters are normally ordered in sketch plan form with panel selections and optional features identified as applicable.
Optional Features
LightingComprising of external-quality fluorescent luminaire and “dusk to dawn” sensor switch all wired in surface-mounted steel conduit to a terminal box at low level. Finalsiteconnectionandfusingbyourcustomers.
Timetable BoardArmortec®-coated aluminium display board, with thermoplastic glazing, fixed to intermediate mullions.
SeatingGRP perch seat incorporated into lower blank panel.
PersonalisationYour logo, crest or name can be etched on to the inside surface of glass panels. All we require from you is your personalisation graphic.
www.glasdon.ie 33
Carleton - Waiting Shelters
For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected] 34
Carleton - Waiting Shelters
1 bay wide flat roof elevation
ColoursFRAMEWORKNatural anodised aluminium.Armortec®-coated framework available at additional cost.
ROOF Flat:AlaskaGrey,RAL7000(nearestequivalentBS480018.B.21).Domed&Pitched: Greytinted
BLANK PANELSChoice of BS 4800 colours for internal and external faces:Green 14.C.39Light grey 00.A.05 Red 04.E.53
SEAT LightGreyBS4800(00.A.05)asstandardwithchoiceofexternal colour from above.
TIMETABLE BOARDBlack case.
Any external/internal colour combination from the blank panel colours above can be chosen at no additional cost. Any other BS 4800 colours are available at a nominal additional cost.
ConstructionSTANDARD FRAMEWORKVertical 50mm x 50mm anodised aluminium section.Horizontal 38mm x 38mm anodised aluminium section.
SELF-ASSEMBLY FRAMEWORKVertical 56mm x 56mm anodised aluminium jointed section.Horizontal 38mm x 38mm anodised aluminium section.
ROOF Flat:0.5mmpre-finishedsteelexternalskin,32mmhigh-densityfoam core, 0.5mm pre-finished steel internal skin. Domed&Pitched:3mmtintedhigh-impact thermoplasticsheet.
GLAZED PANELSStandard choices of: 6mm toughened glass.6mm clear high-impact thermoplastic sheet.
ALTERNATIVE GLAZINGTintedortexturedglass&high-impactthermoplasticsheetisavailable to special order.
BLANK PANELS6mm textured GRP sheet.
TIMETABLE BOARD770mm high x 320mm wide.Armortec®-coated in Black.
InstallationCarleton shelters are supplied with adjustable spigoted legs to enable them to be either base fixed or set into concrete pockets.
METHOD1. BASE FIXING TO A LEVEL CONCRETE BASE. Ensure the shelter is correctly aligned prior to drilling through the pre-drilled holesinthebaseplateandinsertingtheM10x90mmexpandinganchorbolts supplied. The concrete base should be a minimum thickness of 125mm on to hardcore.
2. FIXING TO AN UNEVEN OR SLOPING CONCRETE BASE. Set the shelter down and adjust the spigoted legs as appropriate prior to aligning and base fixing (asinMethod1above). Adjustment is in 20mm steps up to 100mm(seedrawing). The concrete base should be a minimum thickness of 125mm on to hardcore.
3. SETTING INTO CONCRETE POCKETS BELOW GROUND. Whilsttheshelteriselevated,lower the spigoted legs into extended position to provide a 400mm leg projection and set into concrete pockets as appropriate.
126
100
adju
stm
ent
Whensettingintoconcrete pockets extend leg to use this fixing position.(400mm leg projection).
Fixingscrewsinthis position in outer frame.
SPIGOT LEG
516
Dimensions
1265
1115
2300
1 bay wide domed roof elevation3395
3245
2300
500
650
1065 500
3 bay long flat roof elevation
1165
2613
1 bay wide pitched roof elevation
1115
2608
1165
1115
www.glasdon.ie 35
Carleton - Waiting Shelters
TRADITIONAL APPEARANCEWhatbetterwaytoimproveourgenerallandandstreetscapesthantoprovide elegance and style to all forms of waiting shelters throughout our towns and countryside?
Glasdon Heritage Shelters will restore the traditional effect.
MINIMAL MAINTENANCEManufactured from low-maintenance materials, Heritage Shelters offer a high degree of corrosion resistance as well as eliminating routine painting requirements.
SIMPLE INSTALLATIONFullyassembleddeliveryassiststhepromptandsimpleinstallationofHeritage Shelters by our customers. They can either be base fixed using the adjustable spigoted legs to accommodate uneven ground surfaces or set below ground with the legs fully extended into concrete pockets.
For public transport applications our range of Heritage Waiting Shelters can be adapted in size and configuration to meet the needs of disabled persons, particularly wheelchair users, in accordance with the relevant Department for Transport guidelines.
36 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
HeritageWaiting Shelters
Optional Features
In assembled form and normally within 6-8 weeks of order.
Delivery
Specifying1. Select the model which best suits the application, eg. 2 bay with front right and left side entry - model 235.2. Specify whether the shelter is: a) Framewithtoughenedglassupperandlowerpanels. b) Framewiththermoplasticglazedupperandlowerpanels. c) Framewithtoughenedglassupperandblanklowerpanels. d) Framewiththermoplasticglazedupperandblank lower panels. e) Framewithanycombinationofglass,thermoplasticand blank upper and lower panels.3. Select the colour scheme required.4. Heritage shelters are normally ordered in sketch plan form with panel selections and optional features identified as applicable.
ModelHG 235
Toughened glass upper and blank lower panels in maroon colour RAL 3003 with gold decorative relief
1115
2180
2570
1505
Seat Seat
Standard ModelsHeritageWaitingSheltersconsistofanArmortec®-coated aluminium framework, glazing and blank GRP panels in a choice of four standard colours, a decorative moulding to each blank panel which is highlighted in a gold colour and a GRP over-roof in a standard light grey colour.
3 bay long x 1 bay wide Nominal Dimensions
3245mm long x 1115mm wide
2 bay long x 1 bay wide Nominal Dimensions
2180mm long x 1115mm wide
Model HG230
FrontLeft and Right Side Entry
Model HG235
FrontRightand Left Side Entry
Model HG245
FrontRight Entry
Model HG240
FrontLeft Entry
Model HG360
Staggered Entry
Model HG355
DoubleFrontEntry
Model HG225
Open FrontEntry
LightingComprising of external-quality fluorescent luminaire and “dusk to dawn” sensor switch all wired in surface-mounted steel conduit to a terminal box at low level. Finalsiteconnectionandfusingbyourcustomers.
Timetable BoardArmortec®-coated aluminium display board, with thermoplastic glazing, fixed to intermediate mullions.
SeatingGRP perch seat incorporated into lower blank panel.
PersonalisationYour logo, crest or name can be etched on to the inside surface of glass panels. All we require from you is your personalisation graphic.
www.glasdon.ie 37
Heritage - Waiting Shelters
For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected] 38
Heritage - Waiting Shelters
ColoursFRAMEWORKArmortec® coating in a choice of: Maroon RAL 3003 Black RAL9005 Dark Green RAL 6005 Dark Blue RAL 5003ROOF Alaska Grey, RAL 7000, to internal face and LightGrey,BS4800(18.B.25),toexternalface.BLANK PANELSChoice of: Maroon RAL 3003 Black RAL9005 Dark Green RAL 6005 Dark Blue RAL 5003Decorative moulding highlighted in gold.SEAT Choice of: Maroon RAL 3003 Black RAL9005 Dark Green RAL 6005 Dark Blue RAL 5003 Grey BS4800(18.B.21)
TIMETABLE BOARDBlack case.
InstallationHeritage shelters are supplied with adjustable spigoted legs to enable them to be either base fixed or set into concrete pockets.
METHOD1. BASE FIXING TO A LEVEL CONCRETE BASE. Ensure the shelter is correctly aligned prior to drilling through the pre-drilled holesinthebaseplateandinsertingtheM10x90mmexpandinganchorbolts supplied. The concrete base should be a minimum thickness of 125mm on to hardcore.
2. FIXING TO AN UNEVEN OR SLOPING CONCRETE BASE. Set the shelter down and adjust the spigoted legs as appropriate prior to aligning and base fixing (asinMethod1above). Adjustment is in 20mm steps up to 100mm(seedrawing). The concrete base should be a minimum thickness of 125mm on to hardcore.
3. SETTING INTO CONCRETE POCKETS BELOW GROUND. Whilsttheshelteriselevated,lower the spigoted legs into extended position to provide a 400mm leg projection and set into concrete pockets as appropriate.
126
100
adju
stm
ent
Whensettingintoconcrete pockets extend leg to use this fixing position.(400mm leg projection).
Fixingscrewsinthis position in outer frame.
SPIGOT LEG
516
Dimensions
2570
2714
170
3635
3245
2714
500
650
1065 500
170
3 bay long elevation
1505
2714
170
1 bay wide elevation
1115
2 bay long elevation
2180
ConstructionFRAMEWORKVertical 50mm x 50mm aluminium section.Horizontal 38mm x 38mm aluminium section.
ROOF Comprising of 33mm thick composite panel with pre-finished steel internal face and GRP over-roof.
GLAZED PANELSStandard choices of: 6mm toughened glass.6mm clear high-impact thermoplastic sheet.
ALTERNATIVE GLAZINGTintedortexturedglass&high-impactthermoplasticsheet is available to special order.
BLANK PANELS6mm GRP with textured internal face and smooth semi-gloss external face with decorative moulding.
TIMETABLE BOARD
Armortec®-coated aluminium case.Display area measures 720 x 270mm.
www.glasdon.ie 39
Heritage - Waiting Shelters
40 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Modus™
Budget-Beating Shelters
• Robust,doubleskinnedDurapol® roof
• Ecoboard ™ 100% recycled plastic panels
• Vandalex™ anodised aluminium frame
• PETGglazing
• Availablein2sizes
• Differentpaneloptions
• Optionalroofsignagepanel
• Suppliedfullyassembledorasaself-assemblykit
The New Modus Shelter is ideal for customers where space or budgets are limited and is suitable for a wide range of applications, e.g.
• Pay&disPlaymachinecovers
• Waitingshelters
• smokingshelters
• sentryPosts
• mobilePhonePoints
• Pointofsalekiosks
• vendingmachineenclosures
ENVIRONMENTALLY FRIENDLYThe environmentally friendly Ecoboard™ panels are produced using 100%Post-ConsumerWaste(mixedplastics).Theframeextrusionsand spigot legs contain recycled aluminium and steel.
QUICK INSTALLATIONModus Shelters are supplied in fully assembled form, ready for fixing down to a prepared concrete base immediately upon delivery. Shelters can also be supplied as a self assembly kit for multiple roll out programmes or sites with restricted access.
www.glasdon.ie 41
Modus - Budget-Beating Shelters
Carleton™ Perch Seatwith Enviropol® slats
Polycarbonate Graphic
Durapol® Blank Panel1200
1171
244
224
SIGNAGEA Durapol® signage panel can be fixed to the shelter roof, which can be fitted with a polycarbonate graphic or left blank to allow graphics to be attached at a later date.
The ‘Smoking area’ graphic (below) is available from stock. Personalised signage to suit a particular application can also be supplied.
PERCH SEATINGModus Shelters (770 & 1280 Standard Models only*) can be fitted with Carleton™ Perch Seats.Shelters can be fitted with 1 no. Perch Seat 1200 to the rear panel, or 1 no. Perch Seat 600 to each of the side panels.*Perch Seating is not suitable for Modus Smoking Shelters because of the reduced height lower panels.
BLANK REAR PANELThe rear glazing panel can be replaced with an Ecoboard panel if the Modus Shelter is to be located against a wall.
SELF-ASSEMBLY KIT FORM DELIVERYModus Shelters are normally delivered on a pallet in fully assembled form.However, shelters can be delivered in flat pack form for simple self assembly. This is ideal for sites with restricted access, remote locations or multiple roll-out programmes.
Modus Smoking SheltersModus Smoking Shelter models feature reduced height panels to provide 50% open wall area, for full compliance with UK Smoking Shelter legislation.Smokingareasignageisavailableasanoptionalextra(seebelowfordetails).
Modus Smoking Shelters can also be supplied with Glasdon Ashmount™ or Ashmount SG® cigarette bins fitted to the Ecoboard™ panels. Please contact our sales office for details.
Optional Features (Please contact our Sales Office on tel 1800 656 606 for further details.)
Technical InformationCOLOURSVandalex Extrusions (Frame): SilverDurapol® Roof: Anthracite GreyEcoboard Panelling: GreySpigot Legs: Anthracite GreyGlazing: ClearDurapol® Blank Signage Panel: Light Grey
DimensionsCONSTRUCTIONVandalex Extrusions (Frame): Anodised aluminium*Durapol® Roof: Self-coloured polymerEcoboard Panelling: 100% recycled post-consumer waste(mixedplastics)Spigot Legs: Armortec®-coated mild steel*Glazing: 5mm PETGDurapol®GlazingStrips: Self-coloured polymerDurapol® Blank Signage Panel: Self-coloured polymer
* The frame extrusions and spigot legs contain recycled aluminium/steel
14001615
720925
10501255
1085 1415
2040 23
55
Modus 770 & 1280FrontElevation
Modus 770Side Elevation
Modus 1280Side Elevation
The exciting new Zone system from Glasdon redefines the traditional concept of how a shelter should look. Its sleek styling and cantilevered one-piece design offer a unique and dynamic solution for a variety of applications.
•cycleParking(seepage16-17)
•seating
•sunshades
•Playgroundshelters
•Waitingareas
•smokingstations
BUY WITH CONFIDENCETo ensure that the Zone Shelter meets the demands of our customers it has been subjected to rigorous wind tunnel and abuse testing.
COLOUR CHOICEManufactured in Durapol® material, which is self-coloured and never chips or rusts.
ENVIRONMENTALLY FRIENDLYMinimal maintenance for our customers is a key feature of all Glasdon products and Zone Shelters are also 100% recyclable when they reach the end of their working life.
QUICK INSTALLATIONBeing conveniently supplied as one-piece mouldings, Zone Shelters are ready for fixing down to a prepared concrete base immediately upon delivery.
42 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Zone™ ShelterMulti-Purpose Shelters
See page 16-17 for more details of BikeZone Models
DimensionsDeliveryNormally within 3-4 weeks of order.
InstallationZone Shelters are supplied as one-piece mouldings ready for surface fixing on to concrete using the expanding anchor bolts supplied.The minimum base size required is 2500 x 2500mm. The prepared concrete base should be flat, level and a minimum thickness of 200mm on to hardcore.Adequate space must be available behind the shelter to allow access to the rear fixing points.
It is recommended that Zone Shelters are pemanently sited and fixed down to your prepared concrete base at the time of delivery. If installation does not take place immediately, suitable storage arrangements must be made to prevent damage from adverse weather conditions or other influences.
SIDE ELEVATIONFRONT ELEVATION
Technical InformationCOLOURSSHELTER Self-coloured Durapol in:
(Alternativecoloursavailablesubjecttoaminimumorderquantity.)
MATERIALSSHELTER: Durapol®
WEIGHTSSHELTER: 160kg
Grey
Durapol®
Durapol is an extremely robust material, which makes it ideal for use in the manufacture of various products. Durapol material is a polymer formulated to withstand extremes of temperatureandisimpact-testedinourQualityAssuranceLaboratoryaspartofourBSENISO9001:2008testprocedure.
Durapol material will not chip or rust, is easy to clean and never needs painting. Available in a choice of self-coloured options, including Black which contains recycled material.
1612
763
990
1612
763
990
1550 560
600
6030 30
635
335
990
1612
763
2190
2300
2010 Front Hole Centres1938 Rear Hole Centres 1248 Hole Centres
2358
WHITE OUTLINE drawing below
2190
2300
2010FrontHoleCentres1938RearHoleCentres
2358
1248 Hole Centres
Zone Smokers’ Station
Smokers’ Stations provide the ideal way to purchase a complete package for a designated smoking area.
TheZoneSmokers’Station(ModelSS8)includes a Zone Shelter, Ashguard SG cigarette disposal bin and Smoking Area signage.
Smokers’ Stations offer the added benefit of a price saving when compared to purchasing each item individually.
Ashguard SG
www.glasdon.ie 43
Zone Shelter - Multi-Purpose Shelters
For many years the Glasdon range of Smoking Shelters has been the popular choice for organisations wishing to control smoking in the workplace by providing a designated external smoking area.
Our Carleton 50 range offers full compliance with the latest UK smoke-free legislation. This requires that all smoking shelters are not wholly or substantially enclosed and have a minimum of 50% open wall area.
Carleton 50 Smoking Shelters feature reduced height glazing panels on all models to achieve compliance. To help provide greater protection from the weather, each roof style has a perimeter roof canopy.
SELF-ASSEMBLY SHELTERSPatentnumberGB2429468
Formultipleroll-outprogrammes,remotelocationsandsites with restricted access, Carleton models up to a
size of 3 bay x 1 bay with flat roofs can be supplied in self-assembly form for quick and simple assembly by our customers. Comprehensive assembly instructions and a
DVD are provided.
• Excellentweatherprotectionprovided by perimeter roof canopy• Choiceofflat,curvedandpitched roof styles• Extensivecolourchoiceforharmonisationwith surroundings and corporate themes• Low-maintenancematerialsfora cost-effective solution• Optionallightingforimproved visibility during dark winter months• Cigarettebinsforeffectivecontrol of litter• Self-assemblyoptionforsiteswith restricted access
44 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Carleton 50™
Smoking Shelters
Model 5312LLeft Hand Entry
Model 5314MMiddle Entry
Model 5313RRight Hand Entry
Model 5315DLeft & Right Hand Entry
Model 5323LLeft Hand Entry
Model 5212RRight Hand Entry
Model 5223LLeft Hand Entry
Model 5325MMiddle Entry
Model 5224RRight Hand Entry
Model 5326DLeft & Right Hand Entry
Model 5324RRight Hand Entry
2 bay long x 1 bay wide Roof - Nominal Overall Dimensions 2800mm long x 1735mm wideWalls - Nominal Overall Dimensions 2180mm long x 1115mm wide
2 bay long x 2 bay wideRoof - Nominal Overall Dimensions 2800mm long x 2800mm wideWalls - Nominal Overall Dimensions 2180mm long x 2180mm wide
3 bay long x 1 bay wideRoof - Nominal Overall Dimensions 3865mm long x 1735mm wideWalls - Nominal Overall Dimensions 3245mm long x 1115mm wide
3 bay long x 2 bay wideRoof - Nominal Overall Dimensions 3865mm long x 2800mm wideWalls - Nominal Overall Dimensions 3245mm long x 2180mm wide
Model 5211LLeft Hand Entry
Roof Line =
Self-Assembly Shelters PatentnumberGB2429468Formultipleroll-outprogrammes,remotelocationsandsiteswithrestrictedaccess, Carleton 50 flat roof models indicated with an asterisk (*)canbesupplied in self-assembly form for quick and simple assembly by our customers. Comprehensive assembly instructions and a DVD are provided.
1. MODEL Select the model which best suits your application, eg. 3 bay x 2 bay with middle entry – model 5325M.
In addition to the standard models shown, Carleton 50 Shelters can be manufactured in other sizes and layouts to meet your specific requirements. Please contact our Sales Office for further details.
2. ROOF STYLE Select your preferred roof style ie. flat, curved or pitched. Various Carleton 50 flat roof models can be supplied in self-assembly form for quick and simple assembly by our customers. Comprehensive assembly instructions and a DVD are provided.
3. GLAZING Select whether the shelter has: a)toughenedglasspanelsb)blankpanels
Please use the following sequence to specify your Carleton 50 Smoking Shelter or, alternatively, call our Sales Office on 1800 656 606 and we will be happy to assist.
Carleton 50 Shelters are normally specified in sketch plan form with the required features identified as applicable. Please see the typical example section on page 46.
4. LIGHTING Specify lighting for 1 bay or 2 bay wide shelters if required.
5. SMOKING AREA SIGNS Select the quantity of signs if required – we normally recommend one sign per elevation.
6. CIGARETTE-DISPOSAL UNITS Select the quantity of cigarette-disposal units if required. Wenormallyrecommendwall-mountedASHMOUNTunitsfor convenience and maximum utilisation of floor space, however, floor-standing ASHGUARD units or INTEGRO combined litter containers/cigarette disposal units are available as alternatives.
7. COLOURS Select your preferred colour scheme for the shelter and blank panels as appropriate.
Specifying
Models
www.glasdon.ie 45
Carleton 50 - Smoking Shelters
Optional Features For Carleton 50™ Shelters
Typical ExampleColours
Size & LayoutIn addition to the standard models shown, Carleton 50 Smoking Shelters can be manufactured in other sizes and layouts to meet your specific requirements. Please contact our Sales Office for further details.
Carleton 50 Smoking Shelters are supplied as standard with natural anodised aluminium framework, clear panel glazing and a choice of standard colours for blank panels.
Harmonisation with existing architecture and corporate themes can be achieved by choosing Armortec® coated framework, tinted panel glazing and non-standard colour blank panels. Please contact our Sales Office for further details.
This example illustrates a typical shelter.
•ModelD5315Dasshownonsketchbelow with curved roof, toughened glass panels and natural anodised frames •2no.Ashmountcigarette-disposalunits •3no.SmokingAreasigns
Ashmount Ashmount
Sign
Sign
Sign
CIGARETTE DISPOSAL UNITS
ASHMOUNT SG®
Wall-mounted units which are factory-fitted.Manufactured with black Durapol® polymer body and anodised
aluminium domed top.
ASHGUARD SG®
Floor-standing units which are supplied loose for ground fixing by others.
Manufactured with black Durapol® polymer body and anodised aluminium domed top.
INTEGRO™
Floor-standing units which are supplied loose for ground fixing by others.Standard stone-effect colour of millstone and fitted with fire extinguishing plate within the bin hood.
COMBINED LITTER CONTAINER & CIGARETTE DISPOSAL UNIT
ASHMOUNT™
Wall-mounted units which are factory-fitted. Manufactured with Vandalex®, a vandal-resistant anodised aluminium.
ASHGUARD™
Floor-standing units which are supplied loose for ground fixing by others. Manufactured with dark grey Armortec®-coated steel body and stainless steel stubbing grille.
* Ashmount SG® and Ashguard SG® cigarette bins are fitted with SmokeGuard®, an ingenious smoke-dampening device. In the event of a smouldering cigarette being deposited in the unit, SmokeGuard will ensure that the majority of smoke being generated will remain within the unit.
Ergonomically-designed perch seat manufactured with Armortec® coated aluminium.
SEATING
LIGHTINGComprising of external-quality fluorescent luminaire and PIR sensor switch all wired in surface-mounted conduit to a terminal box at low level. Final connection and fusing by others.
1 bay wide shelter - 1 no. luminaire 2 bay wide shelter - 2 no. luminaires
Self-adhesive Smoking Area signs.
Free of charge when factory-fitted to a Carleton 50 Smoking Shelter
SIGNS
For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected] 46
Carleton 50 - Smoking Shelters
COLOURSFramework Natural anodised aluminium. Armortec® coated coloured framework is available at additional cost.Roof (Flat) Alaskagrey,RAL7000,nearestequivalentBS4800(18.B.21).Roof (Curved and Pitched) Grey tinted.Glazing Clear glazing. Tinted glazing is available at additional cost.Blank panels A standard choice of the three BS 4800 colours: Green (14.C.39) Lightgrey (00.A.05) Red (04.E.53). Any other BS 4800 colour can be chosen at additional cost.Perch Seat Lightgrey,RAL9006.
CONSTRUCTIONFramework Vertical 50mm x 50mm anodised aluminium section. Horizontal 38mm x 38mm anodised aluminium section.Roof (Flat) Comprising of 33mm thick composite panel with 0.5mm pre-finished steel external skin, 32mm high-density foam core and 0.5mm pre-finished steel internal skin.Roof (Curved and Pitched) 3mm high-impact thermoplastic sheet.Glazing 6mm toughened glass. High-impact thermoplastic sheet is available at additional cost.Blank panels 6mm textured GRP sheet.Perch Seat Extruded aluminium seat pan and aluminium plate ends, all Armortec® coated.
Technical Information
Dimensions
2800
1151
700
2540
2880
1151
700
2850
2850
310310
500
150
3865
1151
700
336
2300
500 565 500
1151
700
336
2300
310
1735
310
SIDE ELEVATION OF 3 BAY LONG SHELTER
WITH FLAT ROOF
END ELEVATION OF 1 BAY WIDE SHELTER
WITH FLAT ROOF
END ELEVATION OF 2 BAY WIDE SHELTER WITH CURVED ROOF
END ELEVATION OF 2 BAY WIDE SHELTER WITH PITCHED ROOF
END ELEVATION OF 1 BAY WIDE CANTILEVER
SHELTER WITH CURVED ROOF
SIDE ELEVATION OF 3 BAY LONG CANTILEVER SHELTER WITH FLAT ROOF
500 565 500 1058
3395 1165
3245
2300 26
08
608
500
150
500
150
Delivery
Installation
In assembled form and normally within 4/6 weeks of order. Flatroofmodelsuptoasizeof3bayx1baycanbesuppliedinself-assemblyform for quick and simple assembly by our customers.
Carleton 50 Smoking Shelters are supplied with spigoted legs to enable them to be either base fixed or set into concrete pockets.
METHODS1. BASE FIXING TO A LEVEL CONCRETE BASE. Ensure the shelter is correctly aligned prior to drilling through the pre-drilledholesinthebaseplateandinsertingtheM10x90mm expanding anchor bolts supplied. The concrete base should be a minimum thickness of 125mm on to hardcore. 2. FIXING TO AN UNEVEN OR SLOPING CONCRETE BASE. Set the shelter down and adjust the spigoted legs as appropriate prior to aligning and base fixing. Adjustment is in 20mm steps up to 100mm(seedrawing). The concrete base should be a minimum thickness of 125mm on to hardcore.3. SETTING INTO CONCRETE POCKETS BELOW GROUND. Whilsttheshelteriselevated,lowerthespigotedlegsintoextended position to provide a 400mm leg projection and set into concrete pockets as appropriate.
TYPICAL SPIGOT LEG DETAIL
Whensettinginto
concrete pockets extend leg
to use this fixing position
(400mmlegprojection)
Fixingscrewsinthis
position in outer frame
126
51610
0Ad
just
men
t
2800
1151
700
2540
2880
1151
700
2850
2850
310310
500
150
3865
1151
700
336
2300
500 565 500
1151
700
336
2300
310
1735
310
SIDE ELEVATION OF 3 BAY LONG SHELTER
WITH FLAT ROOF
END ELEVATION OF 1 BAY WIDE SHELTER
WITH FLAT ROOF
END ELEVATION OF 2 BAY WIDE SHELTER WITH CURVED ROOF
END ELEVATION OF 2 BAY WIDE SHELTER WITH PITCHED ROOF
END ELEVATION OF 1 BAY WIDE CANTILEVER
SHELTER WITH CURVED ROOF
SIDE ELEVATION OF 3 BAY LONG CANTILEVER SHELTER WITH FLAT ROOF
500 565 500 1058
3395 1165
3245
2300 26
08
608
500
150
500
150
2800
1151
700
2540
2880
1151
700
2850
2850
310310
500
150
3865
1151
700
336
2300
500 565 500
1151
700
336
2300
310
1735
310
SIDE ELEVATION OF 3 BAY LONG SHELTER
WITH FLAT ROOF
END ELEVATION OF 1 BAY WIDE SHELTER
WITH FLAT ROOF
END ELEVATION OF 2 BAY WIDE SHELTER WITH CURVED ROOF
END ELEVATION OF 2 BAY WIDE SHELTER WITH PITCHED ROOF
END ELEVATION OF 1 BAY WIDE CANTILEVER
SHELTER WITH CURVED ROOF
SIDE ELEVATION OF 3 BAY LONG CANTILEVER SHELTER WITH FLAT ROOF
500 565 500 1058
3395 1165
3245
2300 26
08
608
500
150
500
150
www.glasdon.ie 47
Carleton 50 - Smoking Shelters
The new range of Carleton Canopies provides weather-protection for occupants in a variety of applications, e.g. passenger waiting areas, ATM Covers, Parent meeting point for schools and smoking stations.
• Contemporary,stylishdesign.
• Threestandardmodels in lengths of 1400mm, 2800mm and 4200mm.
• 100% recycled cast aluminium framework.
• HighqualityArmortec® coating for low maintenance and long-term durability.
• Wall-mountedinstallation.
• Twin-walledpolycarbonatesheet for added strength.
• Curveddesign to help natural fall-off of rain and snow.
Models
Model 1400
Model 2800
Model 4200
1400mm length
2800mm length
4200mm length
All Carleton Canopies are delivered in fully assembled form ready for wall-mounting by our customers.
Carleton Canopy Model 1400
Carleton Canopy Model 4200
Carleton Canopy Model 2800 and Carleton Perch Seat Model 1800 c/w stainless steel
48 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Carleton™ CanopyWall-Mounted Canopies
www.glasdon.ie 49
Carleton Canopy
Optional Features for Smoking Applications
CIGARETTE DISPOSAL UNITS
ASHMOUNT™
Wall-mounted units Manufactured with Vandalex®, a vandal-resistant anodised aluminium.
ASHMOUNT SG®*Wall-mounted units
Manufactured with black Durapol® polymer body and anodised
aluminium domed top.
* Ashmount SG® and Ashguard SG® cigarette bins are fitted with SmokeGuard®, an ingenious smoke-dampening device. In the event of a smouldering cigarette being deposited in the unit, SmokeGuard will ensure that the majorit y of smoke being generated will remain within the unit.
Please refer to page 51 for options available
SMOKING AREA SIGNS
ASHGUARD™
Floor-standing unitsManufactured with dark grey Armortec®-coated steel body and stainless steel stubbing grille.
ASHGUARD SG®*Floor-standing units
Manufactured with black Durapol® polymer body and anodised
aluminium domed top.
ColoursCast ends: Silver. Connector tubes: Silver.Roof: Bronze tinted.
MaterialsCast ends: Recycled cast aluminium with Armortec® coating. Connector tubes: Aluminium extrusion with Armortec® coating.Roof: Twin-walled polycarbonate sheet.
WeightsModel 1400: 24kg Model 2800: 41kgModel 4200: 58kg
Armortec® CoatingNew ARMORTEC® coating gives even more durability. If any metal component surface is damaged by scratching, corrosion will not spread further than the immediate area.
Bothpostsshownweresubjected,firstlytorepeatedimpactwithametalhammer,followedbysixmonthsinasaltspraycabinetintheGlasdonQualityAssuranceLaboratory. The salt spray cycle is a very aggressive test, designed to accelerate the corrosion process, to simulate long term weathering in an outdoor environment.
Without Armortec®
Coating
With Armortec®
Coating
In comparative salt spray tests the
sample with Armortec® coating lasted 5 times longer than the powder-coated steel sample.
Results of salt spray and impact tests on mild steel with and without Armortec® coating
Technical Information
Dimensions
A
216
305
A
981
385
The recommended height to the top of each canopy above ground is 2485mm
Dimension A
Model 1400 1400mmModel 2800 2800mmModel 4200 4200mm
DeliveryNormally within 3-4 weeks of order.
All Carleton Canopies are delivered in fully assembled form ready for wall-mounting by our customers.
Fullinstallationandwall-mountinginstructionsareprovided.
InstallationCarleton Canopies are supplied with wall fixings suitable for general brickwork that is in good condition.
Fixingmustbecarriedoutbyacompetentperson.
Please note that due to the various forms of wall materials and construction available, it is recommended that professional advice is sought should any doubt exist regarding fixing arrangements.
Carleton Canopy™ Model 2800
Back-to-BackDouble Eclipse Canopy
Side-to-Side Eclipse Canopies
ModelsConcrete-in
mounting postsSurface mounting
postsWall Mounted
Surface mounting postsConcrete-in mounting posts
SingleCanopy
Back-to-BackDoubleCanopy
All Eclipse Canopies are delivered ready for mounting/installation by our customers.
The new Eclipse Canopies are one-piece mouldings that offer partial weather-protection for a variety of applications, e.g. vending machine covers, waiting shelters, smokingstations,pay&displaycanopiesandATMcovers.
• Simpleandstylish one-piece design.
• Curveddesign to help natural fall-off of rain and snow.
• Manufactured using Durapol® material.
• Choiceoffourstandardcolours.
• Containsrecycledmaterial(inblackonly).
• Wall-mountedinstallation.
• Postmountedoptions for surface fixing or concreting in.
• MountingpostshaveanArmortec® coating.
Eclipse Canopies are moulded in Durapol®, which gives excellent weather resistance and rigidity.
The Eclipse Canopy has the option of being sited side-to-side orback-to-backtosuittheapplication.Whensitedinanyconfigurations a thick foam sealing strip is applied to create a watertight seal between the canopies, or the wall and the canopy.
Side-to-Side Eclipse Canopies
50 For more information please contact our sales office on Freephone: 1800 656 606,
Freefax: 1800 656 607, or email: [email protected]
Eclipse™ CanopyWall & Post Mounted Canopies
www.glasdon.ie 51
Eclipse Canopy - Wall & Post Mounted Canopies
Durapol®
Durapol is an extremely robust material, which makes it ideal for use in the manufacture of various products. Durapol material is a polymer formulated to withstand extremes of temperature and is impact-testedinourQualityAssuranceLaboratoryaspartofourBSENISO9001:2008testprocedure.Durapol material will not chip or rust, is easy to clean and never needs painting. Available in a choice of self-coloured options, including Black which contains recycled material.
Technical InformationColoursCanopy: Self-coloured Durapol in options of:
MaterialsCanopy: Durapol®.Mounting Posts: Armortec® coated Mild Steel.
WeightsSingle Canopy: 17kgSurface Mounted Posts (for single canopy): 21kgSurface Mounted Posts (for back-to-back canopies): 26kg
Black Millstone Sandstone Whitestone
Normally within 3-4 weeks of order.
Eclipse Canopies are delivered ready for installation by our customers.
1400
100020
00
2455
2050
500
1029
450
1000
29
2005
500
2000
2455800
Single Canopy: Post Mounted Single Canopy: WallMounted
Dimensions
Delivery
Armortec® CoatingNew ARMORTEC® coating gives even more durability. If any metal component surface is damaged by scratching, corrosion will not spread further than the immediate area.
Both posts shown were subjected, firstly to repeated impact with a metal hammer, followed by sixmonthsinasaltspraycabinetintheGlasdonQualityAssuranceLaboratory.The salt spray cycle is a very aggressive test, designed to accelerate the corrosion process, to simulate long term weathering in an outdoor environment.
Without Armortec®
Coating
With Armortec®
Coating
In comparative salt spray tests the
sample with Armortec® coating lasted 5 times longer than the powder-coated
steel sample.
Results of salt spray and impact tests on mild steel with and without Armortec® coating
Smoking Ban SignsEmployers and managers are required by law to display ‘No Smoking’ signs in or on any premises affected by the ban, so that they can be seen and read by people within and approaching the premises.
Wesupplyfivedifferentsigns,whichcomplywiththelawrelatingtoNoSmokingSignsforpremises.Sign variants 1, 2, 3 and 4 can be supplied as either an A4 polycarbonate plaque or an A4 vinyl sticker. The polycarbonate plaques are rear printed to protect the sign face from impacts or scratches, and are weather, UV and vandal-resistant. The vinyl stickers are durable and hard wearing and are suitable for indoor use. Sign variant 5 is available as a front and rear printed 88mm diameter sticker, which is ideal for mounting on glass where the sign is required to be viewed from both sides.
51 2 3
SmokingArea
NOSMOKINGIt is against the law to
smoke in these premises
NOSMOKING
These are no smoking premises.It is an offence to smoke or
knowingly to permit smoking in these premises.
If you observe someone smoking here, a complaint can be made to:
No Smoking
Foruseindesignated Smoking Areas.
Smoking Area Sign
SmokingArea
NOSMOKINGIt is against the law to
smoke in these premises
NOSMOKING
These are no smoking premises.It is an offence to smoke or
knowingly to permit smoking in these premises.
If you observe someone smoking here, a complaint can be made to:
No Smoking
Conforms to Scottish smoking sign legislation for displaying at entrances to smoke-free premises.
Legal Sign for Scotland
SmokingArea
NOSMOKINGIt is against the law to
smoke in these premises
NOSMOKING
These are no smoking premises.It is an offence to smoke or
knowingly to permit smoking in these premises.
If you observe someone smoking here, a complaint can be made to:
No Smoking
Forgeneraluse around smoke-free premises.
No Smoking Sign
Fordisplayingin smoke-free vehicles and ideal for use on glass doors throughout smoke-free premises.
SmokingArea
NOSMOKINGIt is against the law to
smoke in these premises
NOSMOKING
These are no smoking premises.It is an offence to smoke or
knowingly to permit smoking in these premises.
If you observe someone smoking here, a complaint can be made to:
No Smoking
No Smoking Sign4
SmokingArea
NOSMOKINGIt is against the law to
smoke in these premises
NOSMOKING
These are no smoking premises.It is an offence to smoke or
knowingly to permit smoking in these premises.
If you observe someone smoking here, a complaint can be made to:
No Smoking
Conforms to English and Northern Ireland smoking sign legislation for displaying at entrances to smoke-free premises.
Legal Sign for England and Northern Ireland
Fullinstallationandmountinginstructionsareprovided.
Wall-mountedEclipseCanopiesaresuppliedwithwallfixings suitable for general brickwork that is in good condition.
Fixingmustbecarriedoutbyacompetentperson.
Please note that due to the various forms of wall materials and construction available, it is recommended that professional advice is sought should any doubt exist regarding fixing arrangements.
Installation
Back-to-Back Double Canopy: Post Mounted
Concrete-in mounting posts Surface mounting posts
Glasdon Group Limited Is An Equal Opportunities Employer.© Glasdon UK Ltd. 01/2013. Glasdon reserve the right to alter price and specification without prior notice. PT/NB
In accordance with our policy of continuous development and improvement, we reserve the right to make changes in design and specification without notice.
We reserve the right to amend our prices without notification.
Glasdon UK Limited products are manufactured under license worldwide and various components of the models are patented and design registered.
Glasdon UK is part of the Glasdon Group of CompaniesGlasdon Group is engaged in the design, manufacture and marketing of a diverse range
of building systems, industrial housings and passenger & cycle shelters, as well as award winning environmental litter & waste collection and
road & water safety products sold through various Group Companies in the UK and in Europe.
VISIT OUR WEBSITES:www.glasdon.ie
Our websites are regularly updated. Check out our New Products section and our user Case Studies page. Downloadable versions of other product literature, video clips and product instruction leaflets are also available.
GS231
Glasdon U.K. LimitedPreston New Road BLACKPOOLLancashire FY4 4ULUnited Kingdom
Freephone: 1800 656 606Freefax: 1800 656 607e-mail: [email protected]: www.glasdon.ie
Glasdon Ireland Division
, Armortec, Ashguard, Ashguard SG, Ashmount, Ashmount SG, Bikeminder, BikeZone, Bi-Port, Bi-Rak, Bi-Safe, Bi-Shelter, Bi-Stander, Bi-Store, Carleton, Carleton 50, Corral, Cycleguard, Cyclemaster, CyclePad, Cyclone, Durapol, Eclipse, EcoBoard, Integro, Midi Bi-Minder, Modus, Vandalex and Zone are trademarks or registered trademarks of GLASDON GROUP or its subsidiaries in the UK and other countries.