SHARR

srs W0W HD

SrS_ is a trad .... k of SRS Labs, Inc.

WOW HI

ENERGY STAR e Program information

Products that have earned

the ENERGY STAR _ are

designed to protect the

environment through

superior energy efficiency.

ENERGY STAR e is a U.S. registered mark,

WOW HD technology is incorporated under licensefrom SRS Labs, Inc.

Note: This product is recommended for flat panel TV (LCD and plasma),

Pleaseconfirmthat only thefollowingaccessoriesareincluded.

Remote control x 1

(RRMCGA235AWSA)

Wail mount angle x 2

(LANGKA167AWFW)

RCA cable

(2 pins - 2 pins) x 1

(QCNWGA041AWPZ)

©©©©

Foot cushion x 4

(PCUSSA118AWZZ)

AC/DC adaptor x r

(RADPAA061AWZZ)

Pattern paper x 1

(TCAUHA022AWZZ)

AC power cord x 1

(QACCDA005AWZZ)

_ _ Nut

( Spike + Nut ) x 4

(CLEGMA005AW02.

Length: 25 mm)

SHARP CORPORATION

Printed in MalaysiaTINSZA877AWZZ 10M RAS

equipment does cause harmful interferenceCAUTION to radio or television reception, which can

be determined by turning the equipmentoff and on, the user is encouraged to try to

correct the interference by one or more ofthe following measures:

The Eightnk_g flash with arrowhead symbol, O Reorient or relocate the receivingwit hk_ an equilateral t riangEe, Js intended toalert the u_r to the presef_ce of uninsulated antenna._dangerous voltage" within the product's O increase the separation between theenclosure that may be of sufficient

magf_itude to constitute a risk of electric equipment and receiver.shock to persons.

_1_ The exclamation p3k_t within an equilateral _ Connect the equipment into an outlettriangle is k/tended to aler[ the u_r to on a circuit different from that to whichthe presen_ of imi:_or[ant operatin 9 af_d

mainte{_a{_ce (_rvicing)instructions in the the receiver is connected.literature a_ompaf_ying the appliaf_ce.

.........................................................................................................................................................................® Consult the dealer or an experienced

WARNING : TO REDUCE THE RISK OF radio/TV technician for help.

FIRE OR ELECTRIC SHOCK, DO NOT WARNING

EXPOSE THISAPPLIANCE TO RAIN OR FCC Regulations state that anyMOISTURE. unauthorized changes or modifications

to this equipment not expressly approvedNOTE by the manufacturer could void the user's

This equipment has been tested and found authority to operate this equipment.to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC FOR YOUR RECORDSRules. These limits are designed to provide For your assistance in reporting this unit inreasonable protection against harmful case of loss or theft, please record belowinterference in a residential installation, the model number and serial number

which are located on the rear of the unit.This equipment generates, uses, and can Please retain this information.radiate radio frequency energy and, if not Model number .............................installed and used in accordance with the Serial number .............................instructions, may cause harmful interference Date of purchase .............................to radio communications. However, there Place of purchase .............................

is no guarantee that interference will not

occur in a particular installation, if this

Explanation of Graphical Symbols:

TMSRS WOW HD significantly improves the playback quality of audio, delivering a dynamic 3Dentertainment experience with deep, rich bass and high frequency clarity for crisp detail.

Electricityisusedtoperformmanyusefulfunctions,butitcanalsocausepersonalinjuriesandpropertydamageifimproperlyhandled.Thisproducthasbeenengineeredandmanufactured13)withthehighestpriorityonsafety.However,improperusecanresultinelectricshockand/orfire.Inordertopreventpotentialdanger,please14)observethefollowinginstructionswheninstalling,operatingandcleaningtheproduct.Toensureyoursafetyandprolongtheservicelifeofthisproduct,pleasereadthefollowingprecautionscarefullybeforeuse.1) Readtheseinstructions.2) Keeptheseinstructions.3) Heedallwarnings.4) Followallinstructions.5) Donotusethisapparatusnearwater.6) Cleanonlywithdrycloth.7) Donotblockanyventilationopenings.Installinaccordancewiththemanufacturer's

instructions.8) Donotinstallnearanyheatsourcessuch

asradiators,heatregisters,stoves,orotherapparatus(includingamplifiers)thatproduceheat.

9) Donotdefeatthesafetypurposeof 16)thepolarizedorgrounding-typeplug.Apolarizedplughastwobladeswithonewiderthantheother.Agroundingtypeplughastwobladesandathirdgrounding17)prong.Thewidebladeorthethirdprongareprovidedforyoursafety.Iftheprovidedplugdoesnotfitintoyouroutlet,consultanelectricianforreplacementoftheobsoleteoutlet.

10)Protectthepowercordfrombeingwalked18)onorpinchedparticularlyatplugs,conveniencereceptacles,andthepointwheretheyexitfromtheapparatus.

11)Onlyuseattachments/accessoriesspecifiedbythemanufacturer.

12)Useonlywiththecart,stand,tripod,bracket,ortablespecifiedbythemanufacturer,orsoldwith

theapparatus.Whenacartisused,usecautionwhenmovingthecart/apparatuscombinationtoavoidinjuryfromtip-over.Unplugthisapparatusduringlightningstormsorwhenunusedforlongperiodsoftime.Referallservicingtoqualifiedservicepersonnel.Servicingisrequiredwhentheapparatushasbeendamagedinanyway,suchaspower-supplycordorplugisdamaged,liquidhasbeenspilledorobjectshavefallenintotheapparatus,theapparatushasbeenexposedtorainormoisture,doesnotoperatenormally,orhasbeendropped.

AdditionalSafetyInformation15)PowerSources- Thisproductshould

beoperatedonlyfromthetypeofpowersourceindicatedonthemarkinglabel.Ifyouarenotsureofthetypeofpowersupplytoyourhome,consultyourproductdealerorlocalpowercompany.Forproductintendedtooperatefrombatterypower,orothersources,refertotheoperatinginstructions.Overloading-Donotoverloadwalloutlets,extensioncords,orintegralconveniencereceptaclesasthiscanresultinariskoffireorelectricshock.ObjectandLiquidEntry- Neverpushobjectsofanykindintothisproductthroughopeningsastheymaytouchdangerousvoltagepointsorshort-outpartsthatcouldresultinafireorelectricshock.Neverspillliquidofanykindontheproduct.DamageRequiringService- Unplugthisproductfromthewalloutletandreferservicingtoqualifiedservicepersonnelunderthefollowingconditions:a) WhentheACcordorplugis

damaged,b) Ifliquidhasbeenspilled,orobjects

havefallenintotheproduct,c) Iftheproducthasbeenexposedto

rainorwater,

19)

2o)

21)

22)

d) If the product does not operatenormally by followingthe operatinginstructions. Adjust only thosecontrols that are covered by theoperatinginstructionsasan improperadjustment of other controls mayresult in damage and wil] oftenrequireextensivework by a qualifiedtechnicianto restoretheproductto itsnormaloperation,

e) If the product has been dropped ordamagedin anyway,and

f) When the product exhibitsa distinctchangein performance- this indicatesaneedfor service.

ReplacementParts - When replacementparts are required, be sure the servicetechnician has used replacement partsspecified by the manufactureror have thesame characteristicsas the original part.Unauthorizedsubstitutions may result infire, electricshock,or otherhazards.

Safety Check - Upon completion of anyservice or repairs to this product,ask theservicetechnicianto performsafety checksto determine that the product is in properoperatingcondition.Wall or ceiling mounting- When mountingthe producton awalt or ceiling,be suretoinstaltthe productaccordingto the methodrecommendedbythe manufacturer.PowerLines - An outsideantennasystemshould not be located in the vicinity ofoverhead power linesorother electric lightor powercircuits, or where it can fall intosuchpower linesorcircuits.Wheninstallingan outsideantenna system,extreme careshouldbe takento keepfromtouchingsuchpower linesor circuitsascontactwiththemmight befatal.

23)

24)

ProtectiveAttachmentPlug- Theproductisequipped with an attachmentplug havingoverloadprotection.This isa safetyfeature.See instructionManualfor replacementorresettingofprotectivedevice.If replacementof the plug is required,be surethe servicetechnician has used a replacement plugspecifiedby the manufacturerthat has thesame overload protectionas the originalplug.

Stand - Do not place the product on anunstablecart,stand,tripod or table. Placingthe productonan unstablebasecan causethe product to fall, resulting in seriouspersonal injuries as well as damage tothe product.Use only a cart, stand, tripod,bracket or table recommended by themanufacturerorsoldwiththeproduct.Whenmountingthe producton a walt,be sure tofollowthe manufacturer'sinstructions.Use

only themountinghardwarerecommendedby themanufacturer.

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that tMs Sharp brand product (the"Product"), when shp n its orig hal container, will be free from defective workmansh p and materials, and agrees that t wlL

at ts option, either repar the defect or replace the defective Product or part thereof wth a new or remanufactured equ valent

at no charge to the purchaser for parts or labor for the period(s) set forth below

Ths warranty does not apply to any appearance items of the Product nor to the add tional excluded tern(s) set forth below

nor to any Product the exterior of which has been damaged or defaced, which has been subjected to mproper voltage orother m suse, abnormal service or handling, or whch has been altered or mod fied n design or construction

In order to enforce the rights under ths Imted warranty, the purchaser should follow the steps set forth below and provide

proof of purchase to the servicer

The lim ted warranty described herein is n add tion to whatever mplied warranties may be granted to purchasers by law

ALL iMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABiLiTY AND FITNESS FOR USE ARE

LIMITED TO THE PER]OD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW Some states do not allowIim tations on how long an mplied warranty lasts, so the above lim tation may not apply to you

Neither the sales personnel of the seller nor any other person s authorized to make any warranties other than thosedescribed herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp

The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and

exclusive remedy avalable to the purchaser Correction of defects, in the manner and for the period of time describedhere n, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the

Product, and shall constitute full satisfaction of all cla ms, whether based on contract, negligence, strict liability or othel_wise

In no event shall Sharp be liable= or n any way responsible, for any damages or defects in the Product which were causedby repairs or attempted repa rs peHormed by anyone other than an authorized servicer Nor shall Sharp be liable or in any

way responsible for any ncidental or consequential econom c or property damage Some states do not allow the exclusionof ncidental or consequential damages, so the above exclusion may not apply to you

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY

FROM STATE TO STATE

Modet Specific Section

Your Product Model Number & Description:

Warranty Period for this Product:

Additionai Item(s) Excluded from Warranty Coverage

(if any):

Where to Obtain Service:

HT-SB25O(BK) Sound Bar System

(Be sure to have ths nformation available when you need

sew_ce for your Product)

One ( 1) year parts and labor from the date of purchase

Nomfunctional accessories, supplies, and consumableitems

At a Sharp Authorized Servicer located in the Unted StatesTo find a location of the nearest Sharp Authorized Servicer,

call Sharp toll free at 1-sg0=BE-SHARP

Shp prepa d or carry n your Product to a Sharp AuthorizedServicer Be sure to have Proof of Purchase available If

you shp the Product, be sure }t }s }nsured and packaged

securely

TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwa_], N_ Jersey 074951163

® Usetheuniton afirm,levelsurfacefreefrom

Please ensure that the equipment ispositioned in a well-ventilated area andensurethat there is at least 4" (10 cm) offree space along the sides and top of theequipment.

®

10cm (4") •10cm (4") 10cm (4") _ ®

vibration.

Keep the unit away from direct sunlight,strong magnetic fields, excessive dust,humidityand electronic/electricalequipment(home computers, facsimiles, etc.) whichgenerateelectricalnoise.Donot placeanythingon topof theunit.Do not expose the unit to moisture, totemperatureshigherthan 140°F (60°C) orto extremelylowtemperatures.

• If your system does not work properly,

disconnecttheACpowercordfromtheACoutlet.PlugtheACpowercordbackin,andthenturnonyoursystem.

® Incaseofanelectricalstorm,unptugtheunitforsafety.

® HoldtheACpowerplugbytheheadwhenremovingitfromtheACoutlet,aspullingthecordcandamageinternalwires.

® TheACpowerplugisusedasadisconnectdeviceandshallalwaysremainreadilyoperable.

® Donotremovetheoutercover,asthismayresultinelectricshock.ReferinternalservicetoyourlocalSHARPservicefacility.

® Thisunitshouldonlybeusedwithintherangeof41°F-95°F(5°0-35°C).

foranydamageresultingfromuseofthisunitwithavoltageotherthanthatwhichisspecified.

® ThesuppliedAC/DCadaptorcontainsnouserserviceableparts.Neverremovecoversunlessqualifiedtodoso.Itcontainsdangerousvoltages,alwaysremovemainsplugfromthemainoutletjackbeforeanyserviceoperationorwhennotinuseforalongperiod.

® TheAC/DCadaptorsuppliedwiththeHT-SB250(BK)mustnotbeusedwithotherequipment.

® NeveruseanAC/DCadaptorotherthantheonespecified.Otherwise,problemorserioushazardsmaybecreated.

Warning:® Thevoltageusedmustbethesameasthat

specifiedonthisunit.UsingthisproductThesoundlevelatagivenvolumesettingdependswithahighervoltageotherthanthatwhichonunitefficiency,location,andvariousotherisspecifiedisdangerousandmayresultfactors.Itisadvisabletoavoidexposuretohighinafireorothertypeofaccidentcausingvolumelevels,whichoccurswhileturningtheunitdamage.SHARPwillnotbeheldresponsibleonwiththevolumecontrolsettinguphigh,orwhilecontinuallylisteningathighvolumes.

Reference page

1. Standard Indicator .................................. 122. Qnema/Game Indicator ......................... 123. Information Display ................................ 124. Sport Indicator ........................................ 125. News Indicator ........................................ 126. On/Stand-by Button ................................ 117. Volume Down Button ............................. 11

_2_3 _4 _4 _3_ 8. Volume Up Button ..................................11

,_._l_l 9. SurroundButton.....................................1210. Function Button......................................1211. Remote Sensor12. Left Front Speaker13. Bass Reflex Duct14. Subwoofers15. Right Front Speaker

Referencepage1.AudioLineIn2Jack.................................92.LineIn1Jacks.........................................93.DCInputJack........................................10

RemotecontrolfPlasticshield

Referencepage1.RemoteControlTransmitter2.Cinema/GameButton.............................123.StandardButton.....................................124.VolumeUpButton..................................125,SubwooferLevelDownButton.............126.VolumeDownButton.............................127.Bass/TrebleButton.................................128.TVOperationButtons..............................69.On/Stand-byButton................................1110.SportButton............................................1211.NewsButton...........................................1212.SubwooferLevelUpButton..................1213.DimmerButton.......................................1114.MuteButton.............................................1215.LineButton..............................................12

Note: BatteryhoiderBeforeusingremotecontrol,pleaseremoveplasticshieldatbatteryhoider.TVOperationButtons(OnlySHARPTV):On/Stand-bySetstheTVpowerto InputSelectButtonPressthebuttonButton "ON"or"STAND-BY". (TV) to switchtheinput

_,2#_y source.Q

VolumeUpand Turnup/downtheTV ChannelUp and Down Switchup/downtheDownButtons volume. Buttons TVchannels.

®

Note: • Some modelsof SHARPTV maynotbe operable.• SHARPTV remotecontrolwill notworkwith HT-SB250(BK)system.

MakesuretounplugtheACpowercordbeforeinstalling the unit or changing theposition.

Selectfrom threeinstallationmethodsaccordingto thepreferredposition.

Nuts (securedon spikes) must be used wheninstallingspikes.The unit can be levelledby adjustingthe spikesand nuts.

Note:

Option 1oroption2foot cushionpositionsbasedon LCDTV stand.

To mount the unit on the wall ]

Caution:

® Bevery carefulto preventthe unit [4.19Ibs.(1.90kg)] from fallingwhenmountingon thewall,

® Beforemounting,checkthewallstrength,(Donotputon theveneerplasterorwhitewashedwall. The unitmay fall.) If unsure,consultaqualifiedservicetechnician.

® Mounting screws are not supplied. Useappropriateones.

® Check all wall mount angle screws forlooseness.

® Selectagood location.If not, accidentsmayoccuror theunitmaygetdamaged.

® SHARP is not responsible for accidentsresulting from improper installation.

Tightenall spikes asshownNotes:

® Option1oroption2indicatesspike positionsbasedon LCDTV stand.

® Whenattachingthespikes,placetheunit onacushionor softcloth to avoiddamage.

Caution:

When usingthese spikes on glossy or slipperytable such ason glass top, stickfoot cushionsatthe bottomof thespikesto avoidslippage.

SHARPdesignedtheunitssoyoumayhangthemon thewall. Useproperscrews(notsupplied).Seebelowfor sizeand type.

1/8"(3.2mm)

(5 mm)_ 3/8"(9 mm)

Min.7/8"(22 ram)

I Usingfoot cushions I

1 Fixthe patternpaperto thewall in horizontal

positionas below.44 mm

509

Wall surface 44 mm 29 mm

29 mmAttachfoot cushionsas shown __

Pattern paper

2 Makeaholeonthewallfollowingthescrewpointmarksonthepatternpaperbyusingadrill.

1-1/4"(32ram)

Fixawallmountplugintotheholeusingahammer,untilit isflushwiththewallsurface.

1-1/4"(32ram)

4 Screwthewallmountangletothewallasshownintheillustration.(Totalscrewis8pieces)

1 Alignthewallmountslotattheunittothe23

wallmountangle.

Slot theunit into thewallmountangle.

Fix themsecurely.

Wallsurface ....

Installation image:

Place the unit as shown.

Note:

Make sure all screws are fully tightened.(screws are not supplied)

Notes:® As the sound from the unit is omni-

directional, you can place the unitanywhere you like. However, it isrecommended to place it as close tothe TV as possible.

® The front panel of the unit is notremovable.

Caution:

® Do not change the installation directionwhen the unit is turned on.

® Do not stand or sit on the unit as youmay be injured.

Safety wires (not supplied) are useful to preventthe unit from falling off the table.

_ Loop the safety wires (not supplied) into each

.... _ hole as shown and tie the safety wires to the..... I LCD TV stand.

Caution: Notes:Tum off all other equipment before making any ® To connect to TV, use either LiNE IN 1connections, jacks or AUDIO LINE IN 2 jack only.

Tuner receiving for other audio system ® Refer the operation manual of the® Placing the antenna near the unit AC equipment to be connected.

power cord may cause noise pick up. ® Fully insert the plugs to avoid fuzzyPlace the antenna away from the unit for pictures or noises.better reception.

If theTV/monitorhasan audiooutput,connect itto the LINE IN 1jacks on the rearof the unit. IftheTV/monitorhasheadphonejack,connectit to

the LINEIN 2jack onthe rearof the unit.

Sound bar Sound bar

To selectLINEIN1function:• On the unit:PressFUNCTIONbuttonrepeatedly

until"LI" isdisplayed.• On remotecontrol:PressLINEbuttonrepeatedly

until"LI" isdisplayed.

To select LINE IN 2 function:

• On the unit:Press FUNCTIONbutton repeatedlyuntil"L2" is displayed.

• On remotecontrol:Press LINE buttonrepeatedlyuntil"L2" is displayed.

Notes:

• if the TV volume iscontinuously in low level,the unitwill automatically power off. Increase the TV outputvolume to enjoy the soundfrom the unit.

• If the unitvolume is continuouslyinveryhigh level,theunit will mute andrecoverafter 3 seconds.

Aftercheckingalltheconnectionshavebeenmadecorrectly,connectthe AC power cord to the ACpowerinput jack, thento the ACoutlet.

_ Plug the AC power cord into the AC/DCadaptor.Plug the AC/DC adaptorcable into the DCINPUTjackon the unit.

(_) PlugtheAC powercordinto anACoutlet.

AC/DCAdaptor

DC INPUTjack(DC 12V)

AC outlet ~ 50/60 Hz)

Caution:If this product is to be used in otherthan 120Vregion,please changethe ACpowercord to suitthe region.

The AC powercord part codes for 220 - 240 Vregionareasfollow :1) QACCEAOg2Awog (For Europe and Latin

Americaregion)2) QACOBAO05AWgO(Per United Kingdom

region)3) QACOLAO02Awgg(ForAustraliaregion)

Notes:

® There will be no indication during powerstand-by mode unless the ON/STAND-BYbuttonis pressed.

® Unplug the AC/DC adaptor from the ACoutlet if the unit will not be used for a

prolongedperiodof time.® Useonly thesuppliedAC/DCadaptor.Using

otherAC/DC adaptormaycausean electricshockor fire.

This productcontainsaCR CoinLithiumBatterywhich contains Perchlorate Material - specialhandling may apply, California residents, seewww.dtsc.ca.gov/hazardouswaste/perchlorate/

1 Insertpin intothe holeas shownand pull to

openthebatteryholder.

remotecontrol __'_l

2 Remove the old battery from the battery

holder, insert the new battery and thenslidethebatteryholderbackinto theremotecontrol.

Batteryholder ___ Batterytype

-I-- LockingtabPolarity (+)symbol

(+) siie up

@

Precautions for battery use:Removethe batteryif theunitwill notbe usedfora longperiod of time. This witl prevent potentialdamagedue to battery leakage.

Caution:

• Do not use rechargeable battery (nickel-cadmiumbattery,etc.).

® Dangerof explosion if battery is incorrectlyreplaced.

® Replace only with the same or equivalenttype.

® Batteries(batterypackorbatteriesinstalled)

@shallnotbe exposedto excessiveheatsuchassunshine,fire or the like.

® Installingthe battery incorrectlymay causetheunit to malfunction.

Notes concerning use: VOL.+® Replacethebattery if theoperatingdistance ON,STANO-B_" I

iS reduced or if the operation becomes Terratic. Purchase "OR 2025", coin lithium ÷_

battery.® Periodically clean the transmitter on the Press the ON/STAND-BYbutton.

remote control and the sensor on the unit Thesoundmodeindicatorand displaylight up.witha softcloth.

® Exposingthe sensor on the unit to strong Note:light may interfere with operation.Change If thepowerdoes not turnon, checkwhether thethelighting or thedirectionof the unit if this powercordis pluggedin properly.

occurs. To set the unit to stand-by mode:® Keeptheremotecontrolawayfrom moisture, ® Pressthe ON/STAND-BYbuttonagain.

heat,shock,andvibrations.

PresstheDIMMERbuttonto adjustthebrightnessof thedisplayand soundmode indicator.

i ound mode indicatorand displaybright

Soundmode indicatorand displaydim

Soundmodeindicatoranddisplayoff.Pressingany button will light up the display for 3secondsonly.

Ifyou turnoff and on theunit withthevolumesetto 40 orhigher,the volumestartsat 20 and fadesin to the last set level.

Unit operation:Pressvolumeup (VOL.+ ) to increasethevolumeand pressvolumedown(VOL.- ) to decreasethevolume.

00_01_02 ..... _59_60

Remotecontrol operation:PresstheVOLUME+ buttonto increasethevolumeandtheVOLUME- buttonto decreasethevolume.

The volumeis muted temporarily ._ _ _ ,_/

when pressingthe MUTE button i_ontheremotecontrol.Pressagainto restorethe volume. _, _ , _ _

Pressthe _ _5BASS/TREBLE ---_

buttontoselect _"BASS".

Within 5 seconds, press the VOLUME(+ or -) button to adjust the bass.

1 Pressthe

Main unit operation: BASS/TREBLETo change to a different mode, press the buttonto selectSURROUNDbutton repeatedlyuntil the desired "TREBLE".

soundmodelights up. 2

Remote control operation:Press a desired sound mode on the remotecontrol.

STA"'DARD WOWHDis onfor nominal

r effect

ClNEM_/GAMEWOWHDonfor cinema/gamesoundeffect

WOWHDon for sport

L SPORT broadcasting

N_a WOWHDon for news

The unitlevelcan beadjusted.To increase the level, press I !-':llthe SUBWOOFER LEVEL/_ button. -s_-4. _ 4_s

To decrease the level, pressthe SUBWOOFERLEVELx/button.

Note:

When soundfrom theunit is distorted,decreasethe subwooferlevel.

Within 5 seconds, press the VOLUME(+ or -) button to adjust the treble.

iiiiiiii iii_!_i_i!i!iiiill

When the FUNCTION LINE1 [_

button on unit or LINE _ !button on the remote

control is pressed, the LIE 2

inputsourcewillchange. |Press the FUNCTION

buttonon unitorLINEbuttonon theremotecontrol

repeatedlyto selectdesiredinput source.

Note:The backupfunction will protect the memorizedfunction mode for a few hours should there be

a power failureor the AC power cord becomesdisconnected.

Auto power on function:When you pressthe LINE buttonon the remotecontrol,theunit wiltturnson at last function.

Auto power off and auto detect signal:® tfno signalisdetectedfor 20 minutesduring

poweron, the unit will automaticallygo tostand-by mode. The STAND-BYindicatorturns red.

® The unit will automatically power ON ifit detects audio signal from connectedequipment,unlessit is turned offmanually.

Manypotentialproblemscanberesolvedbytheownerwithoutcallingaservice--technician.

Ifsomething iswrong with this product, checkthe following before calling your authorizedSHARP dealer or service center.

Symptom

No sound isheard.

Possible cause

• Is the input signal(selection) setproperly?

® lsthe volumelevel set to "0"?

• Is mutingactivated?

Noise is ®

heard duringplayback.

When a button •

is pressed, theunit does not

respond.

The power is ®not turned on.

O

Move the unit

away from anycomputers ormobile phones.

Set this unit to

the stand-bymode and thenturn it back on.

Is the unit

unplugged?(Refer to page10.)The protectioncircuit may beactivated. Unplugand plug in thepower cord againafter 5 minutes ormore.

Symptom

The remotecontrol does

not operateproperly.

Possible cause

The unitcannot ®be turned onwith the remotecontrol. •

TV cannot be ®

operated withthe remotecontrol.

® Isthe batterypolarity correct?

® Isthe batterydead?

® Is the distance or

angle incorrect?® Arethere any

obstructions infront of the unit?

® Is there a stronglight shiningon the remotesensor?

• Isthe remotecontrol foranother

equipment usedsimultaneously?

Is the AC powercord of the unit

plugged in?Is the batteryinserted?

Depending onthe model, someor all functions

may not be

operable usingthe remotecontrol of this

unit. In this case,use the remote

control suppliedwith the TV.

Suddentemperaturechanges,storageoroperationinanextremelyhumidenvironmentmaycausecondensationinsidethecabinetoronthetransmitterontheremotecontrol.Condensationcancausetheunittomalfunc-tion.tfthishappens,leavethepoweronuntilnormalplaybackispossible(about1hour).Wipeoftanycondensationonthetransmitterwithasoftclothbeforeoperatingtheunit.

Whenthisproductissubjecttostrongexternalinterference(mechanicalshock,excessivestaticelectricity,abnormalsupplyvoltageduetolightning,etc.)orifitisoperatedincorrectly,itmaymalfunction.Ifsuchaproblemoccurs,dothefollowing:1 Settheunittothestand-bymode

andturnthepoweronagain.2 If the unit is not restored in the

previous operation, unplug andplug in the unit, and then turn the

power on.

Periodically wipe the cabinet with a softcloth.

Caution:

® Do not use chemicals for cleaning(gasoline, paint thinner, etc.). It maydamage the cabinet finish.

® Do not apply oil to the inside of eachcomponent. It may cause malfunctions.

Make sure to disconnect all audio inputcables attached to the unit before performingthe factory reset.1. Press the ON/STAND-BY button to enter

the power stand-by mode.2. While pressing the SURROUND button,

press and hold the ON/STAND-BY buttonuntil "CL" appears.

SURROUND ON/STA_D BY |

Caution:

This operation will erase all data stored inmemory.

Whenyoufailtoperformoperationsproperly,thefollowingmessagesaredisplayedontheunit.

Display Meaning® Malfunctionofthesurroundcircuit.Placetheunit

_or _ or_ awayfromnoisesourceandplugtheAOpowercordintoanotherACoutlet.(*)i

_1 ® When the protection circuit of the amplifier isactivated.

Power indicator (blinks red)

(*): Should the same message appear even if the unit is unplugged and plugged in or 'set to the stand-by mode and on again, contact your local dealer where you purchasedthe unit.

As part of our policy of continuous improvement,SHARP reserves the right to make design andspecification changes for product improvement without prior notice, The performance specifica-tion figures indicated are nominal values of production unit.There may be some deviations fromthese values in individual unit,

2,1-waySpeakerSystemFrontSpeakers:1-1/2"(40mm) Full RangeImpedance:12ohms/Channel

Subwoofer:2-1/4"(57 mm)Woofer(x4)Impedance:3ohms

Input Analog input(LINE1):terminals RCAtype x 1pair (L/R)

500mV / 47 kohms

Analog input(LINE2):Stereominijack _ 3.5mm100mV/47 kohms

Dimensions Width: 33-1/2"(851 mm)Height:3-3/4"(96 mm)Depth:2-3/4"(70 mm)

Weight 4.19 Ibs.(f.90 kg)