60

Brcker OPAL Spinning-Rings the SWISS solution;

Custom-built exclusively for Chinesering spinning frames

The Brcker OPAL ring is the answerto the demands of todays fast pacedspinning industry, where the spinningmills have to work with very tight costcontrol, whilst adapting quickly to theever changing markets.

The Brcker OPAL features thefollowing advantages: They are custom-designed and suit-

able exclusively for Chinese ringspinning frames to produce best pos-sible yarn quality.

They do not require a special run-ning-in time and offer high produc-tivity from the very installation of thering.

With an attractive price / perform-ance ratio, they correspond to SwissBrcker quality parameters anddesigned for a lifetime of about 5years.

In combination with Brckertravellers, it produces yarn qualities whichcustomers are used to achieving only withthe well-known Brcker TITAN ring.

30 Million TITAN Spinning Rings

Brcker has been able to maintain itsleadership position in spinning rings withtheir TITAN ring, with sale of more than30 million pieces around the world.

Brcker Ring / Traveller systems - withbest value for money

Brcker will also exhibit the provenaccessories such as: TITAN and ORBIT spinning rings and

the relevant travellers PYRIT and ZIRKON travellers for

especially demanding applications Cost saving tools such as the Brcker

RAPID for easy and time saving inser-tion of travellers

The well-known and appreciatedrange of BERKOL Cots and Aprons

BERKOL supergrinder grindingmachine

Brcker OPAL Spinning Ring Custom-built exclusively for Chinesering spinning frames.

Graf + Cie AG

Supplier of premium components forkey processes in the short staple spinningindustry and nonwoven applications, Grafis the leading manufacturer of metalliccard clothing, stationary flats and flexibleflat clothing, circular - and top combs formajor producers of carding and combingmachines, roller cards as well as spinningmills. Graf provides convenience at work,superior performance with focuson highquality yarn output.

Hipro metallic wire

Due to innovative geometry, excellentmaterial and firstclass processing, Hiprometallic card clothings ensure topperformance and precision and anexceptionally long working life. They aresuitable for all standard man-made fibresin the nonwoven sector and wool. Theycan be used on doffer, worker, stripperand condenser rollers. These robustclothings are available with normal profileand as interlinked clothings.

Resist-O-top flexible flat clothing

The resist-O-top generation offlexible flat clothings for processing ofcotton, man-made -, and regenerated

fibres as well as for blends and swingapplications, is another of Grafsinnovations with a noticeable impact inthe market. The resist-O-top settingpattern favours the extraction of shortfibres and trash as well as the eliminationof neps. This flat series is progressively setwithout straight gaps between the rowsof teeth. The wire dimensions for all Cand M-types are selected with adifference of 5 numbers. The wholerange of flats is available for all differenttypes of cards.

Ri-Q-Comb for Rieter E80 comber

The latest series of circular combs isexclusively designed for the new combingmachine of Rieter type E80. Taking intoaccount latest technologicaldevelopments and requirements, it has anenlarged combing area in excess of 130and will be available in three versions:Ri-Q-Comb i400 for short and mediumstaple, Ri-Q-Comb i500 for medium andlong staple and Ri-Q-Comb i700 for verylong staple. The benefit of the new seriesof combs to the customer is the markedimprovement in quality and production.

Novibra Boskovice s.r.o.

Novibra is the leader in spindle technologyand the only 100% in-house spindle maker. In1988, the revolutionary HPS design changedthe classical ring spinning and opened newprospects for spinning in speed up to 25 000RPM. Till now this design maintainsunsurpassed position and is popular for highspeed spindle design.

A wide range of spindles has beendeveloped to meet all requirements ofyarn producers and spinning machinemanufacturers world-wide. Besidescomplete spindles, Novibra also suppliesindividual inserts.

Brcker, Graf, Novibra and Suessen Experiencethe differenceThe 4 companies Brcker, Graf,Novibra and Suessen joined theirsales forces, uniting the world'sleading brands for the supply oftechnology components to the textileindustry, forming the only globalprovider of components for allspinning technologies. AtShanghaiTex 2013 the latestdevelopment to improve fibre yieldand productivity will be presented.

OPAL ring.

Hipro Clothing.

Almost all renownedmanufacturers of ringspinning machinesspecify Novibra spindlesfor high performance.Novibra has alwaysbeen focused onreducing spindlevibrations, higher speed,constant yarn quality,low maintenance andlonger life time.

Double housingNASA HPS 68 spindles feature uniqueNoise Absorbing System Assembly thatensures top performance with minimumneck bearing load, vibration and noiselevel even at speeds above 20 000 RPM.NASA HPS 68 is the most used spindle inpremium spinning machines.

The high performance of spindles onmodern automated ring frames requiresstate of the art clamping device for aneffective and reliable doffing.

New Novibra clamping crownCROCOdoff ensures improved cutting(no yarn underwindings) and brings thereduction of yarn breakage during startup. Other benefits are reduced aterialloss, lower energy consumption andreduction of maintainance costs (lesscleaning). Improved CROCO teethdesign further evolves well provensolution of clamping of yarn.

The machine contamination isminimized, no uncontrolled yarn-endflying leads to reduction of yarn breakageat start up and also to reduction ofenergy consumption. Reliable clampingand yarn cutting brings considerableadvantages to the spinners duringdoffing.CROCOdoff has been designedfor use on new machines as well as forold machines upgrade.

Spindelfabrik Suessen GmbH

SUESSEN is the acknowledged Leaderin Open-End Rotor Spinning andCompact Ring Spinning Technology.

The well-known Open-End SpinBoxesSE 7, SE 8, SE 9 and SE 10 weredeveloped and manufactured bySUESSEN. The latest SpinBox generations,SC and SQ series, are delivered to themanufacturers of rotor spinning machinesRieter in Switzerland and Savio in Italy,but also retrofitted into existing rotorspinning equipment. In total, SUESSEN

has manufacturedover 3,000,000SpinBoxes.

SUESSENsEliTeCompactSpinning System hasbeen sold for over6,000,000 spindlesand has establisheditself as the mostversatile compact ringspinning system.Existing ring spinning

machines of various manufacturers canbe upgraded to compact spinning, usingSUESSEN EliTeCompactSet. In theupcoming ShanghaiTex 2013, Suessenwill demonstrate:

Technology leadership in spinning

The many benefits they providecustomers in terms of improvedtechnology and productivity. Impressivereturn on investments achieved by theacquisition of modernization packages.

At SUESSEN, considerableinvestments in continuous R&D,combined with applied research that isdirectly carried out at their customersmills are made. This ensures that they areable to further develop their technical andtechnological components. In particular,the focus is on universal applicability,improved yarn quality, increased servicelife, reduced maintenance and provenreliability in industrial application.

EliTeCompactSet V5

HP-GX 3010 Top Weighting Arm forshort-staple ring spinning machines.

HP-GX 4010 Top Weighting arm forroving machines.

ACP Quality Package with newPINSpacer NT and the NEW EliVAC-CDS vacuum system.

Premium Parts - SpinningComponents and Spare Parts.

EliVAC-CDS - Central Duct Solution

The central suction duct is located ontop of the ring spinning machine, thevacuum is generated by one motor withfilter box. The main advantages are: Easy and fast installation, with no

rotating drive shafts, pulleys, belts,bearings.

No individual fans for groups ofEliTubes and a reduction of energyconsumption by approx. 20%.

With less maintenance fewer spareparts are required.

The yarn quality remains unchanged.

ACP Quality Package with newPINSpacer NT

The Active Cradle with the PINSpacerNT improves the drafting process by anenhanced interfiber friction in the maindraft zone. The Active Cradle withflexible leading edge and optimised pinposition improves the values of the mostimportant yarn parameters and is suitablefor all popular top weighting arms.

Premium Parts

Spinning components and spare partsfor Autocoro Rotor Spinning Machinesincluding the new type of SOLIDRINGS43 3.6 for special applications and theSpinBox SE 9 Performance Kit will beshown at Shanghaitex.

Crocodoff.

ELiTe Compact device.