Shakers - kromat.hukromat.hu/UserFiles/files/labormuszer/Jeiotech síkrázók.pdf · Cat. No. AAH31105K AAH31205K AAH31305K Electrical Requirements (120V, 50 / 60Hz) 0.4A 0.4A 0.4A

Advanced Orbital ShakersMini ShakersRocking & Waving Shakers

Dual-Action ShakersEconomic Shakers

Shakers

Selection GuideShakers

Description Speed Range [RPM]

MaximumAmplitude Size

[mm / inch, dia]

Net Weight[kg/Ibs] Page

Benchtoptype- Open-Air

SKC-6075

Advanced Orbital Shaker 10 to 500

19 / 0.7465 / 143.3

90

SKC-6100 25 / 0.98SKC-6200 50 / 1.96SKC-7075 19 / 0.74

75 / 165.4SKC-7100 25 / 0.98SKC-7200 50 / 1.96SK-300

Dual-Action Shaker 10 to 300

40 / 1.624 / 52.9

92SK-600 29 / 63.9SK-71 70 / 2.4 50 / 110.2SKF-2025

Economic Shaker

10 to 500 7 / 0.3

20 / 44.1

93

SKF-2050 10 to 400 13 / 0.5SKF-2075 10 to 300 19 / 0.7SKF-2025R 10 to 450 7 / 0.3SKF-2050R 10 to 350 13 / 0.5SKF-2075R 10 to 250 19 / 0.7SKF-3050 10 to 400 13 / 0.5

33.68 / 74.25

SKF-3075 10 to 300 19 / 0.7SKF-3100 10 to 300 25 / 1.0SKF-3050R 10 to 350 13 / 0.5SKF-3075R 10 to 250 19 / 0.7SKF-3100R 10 to 250 25 / 1.0CMS-350 Mini Shaker 50 to 300 13 / 0.5 8 / 17.6 94CRS-350 Rocking Shaker

10 to 100[ Tilt 7~13° adjustable] 3.68 / 8.11

95CWS-350 Waving Shaker [ Tilt 0~13° adjustable] 3.75 / 8.27

Separatory Funnel Shakers

Description Speed Range [RPM]

VerticalStroke Length

[mm / inch]

Net Weight[kg/Ibs] Page

Benchtoptype RS-1 Separatory Funnel

Shakers 50 to 300 40 / 1.6 24.0 / 52.9 96

Accessories & OptionsDescription Page

for Shaker - Open-Air 97 - 101

Safety functions1) Self-protecting cut-off function :

- Over-current fuses for user safety.

2) User setting functions: Select automatic run or manual run after power has been interrupted.

3) Acceleration / deceleration circuit : (Excludes RS, CMS, CWS and CRS models)

- The shaker units stops and starts at the always same position.

- To prevent spillage from flasks and tubes the shaker gently starts up and gently stops.

4) If the load sensor detects any type of imbalance from the shaker it will reduce the shaking motion . (only SKC models)

Optimum control performance1) Easy to use, comes in a wide range of rpm setting

which covers most applications.

2) Professional electronic and program control. - Microprocessor PID controls. - Self-diagnostic function identifies any errors

and advises the user on how to correct the errors.

3) Multi-function shaking system: - Timer

SK SKF SKCWait on - • •Wait off • • •Program mode - - •

- Forward & Backward, Pause.

4) Similar key arrangements to the temperature humidity chamber, bath, circulator, and shaker.

- User-friendly controls, splash proof / easy to clean keypad and clear LED display.

(Only SK and SKF models) - Colorful and bright VFD display with interactive

touch keys. (SKC, CMS, CWS and CRS models)

5) End of shaking session unit stops while an audible alarm sounds. (Only RS models)

Ideal construction1) Dual shaking action- select from orbital or recip-

rocating shaking motion. (Only SK models)

2) Slim and low-profile design, reduces the vibration and sliding caused by the high speed shaking motion.

3) Brushless DC motor creates a smooth and quiet uniformed shaking motion.

4) Innovative triple-cam shaking system. (SKC models)

5) DD(Direct drive) motor allows the shaker to hold heavy loads, is quiet, high rpm, and durable.

(SKC models)

6) Dirt repellent powder coated external surface.

7) Wide range of accessories.

Technical Benefits

General ApplicationsGeneral applications

Open-Air and Separatory funnel ShakersSKC series SK. SKF series RS series CMS CRS / CWS

Bacterial suspensions • •Cell culture • • • •Diagnostic tests • • •Drug analysis • • • • •ELISA • • • •

Environmental technology (waste water and soil analysis) • • •

Enzyme immunoassays • • • •Extraction procedures • • • •General mixing • • • • •Hemolyzing blood sparation • • • •Hybridization • • • •Inorganic solvent extraction •Soil compound extraction •Solubility studies • • •

Solvent extraction for water quality analysis •

Staining and destaining • • • •Perparation for metal analysis •Pharmaceutical profiling • • • • •Protein synthesis • • • •

* For general purpose use applications.

88

ShakersShakers - Open - Air

Please visit .comFor further information on Jeio Tech´s Shaker productsInformation is readily available on our website.

89

Convenient and unique Shaking FunctionsThis unique shaker stops and starts at the always same position. This shaker is beneficial for semi-automated dosing or sampling of samples. Select between clockwise and counterclockwise shaking motion.

- These durable shaking systems are able to function stably at low rpm settings. (between 10-25rpm) Usually the SK models-10rpm (SKC models-30rpm) setting is great for low damage biological mixing tests and cell cultivation.

Shaking SystemShakers

only start / stop here

Power offPower off

Reciprocating motion

Orbital motion

Dual-action Shaking SystemAll SK, SI, and IS shaking units are dual-action. The user is able to select between orbital and reciprocating shaking motion. Simply change the type of shaking motion by changing the way the platform is connected.

Multi-function Shaking SystemIntensive multi-function shaking system surpasses all the previous levels of shaker units. Mix and match clockwise, counterclockwise, start, and stop motions. (Making 6 possible combinations - refer to each model spec.)

90

SKC-7075Optional Accessories •Universalplatforms,Dualuniversalplatforms,

see page 97-101 •Rubbermats,Universalattachments •Flaskclamps,Funnelclamps •Testtuberacks,Springwireracks,HalfSpringwireracks •Microplateholders •Labsticker

SKC Control Display

Advanced Orbital ShakersShakers

Please visit .comFor further information on Jeio Tech´s Shaker products Information is readily available on our website.

91

Advanced Orbital ShakersInnovative triple-cam shaking system with compact design and superior fabrications.Exclusive SKC shaker series can carry out low maintenance applications that demand heavy duty, continuous operation, and high reliability testing.

Shakers

Constructional features • Microprocessor PID controller provides feedback to motor to

maintain constant speed during operation. • Ideal DD(Direct Drive) Brushless Motor supports heavy loads, quiet

(beltless, brushless, and gearless), maintenance free, and delivers high torque at high speeds, smooth rotation.

• Slim and low-profile design (height of 122mm) useful for various applications for example usage in confined areas.

• Highly chemically resistant and durably manufactured. • Convenient universal platform exchange sliding. • Maintenance-free, triple cam system, able to handle heavy loads

with reduced vibration. • To prevent spillage from flasks and tubes the shaker gently starts

up and gently stops. • This unique shaker stops and starts at the always same position.

This shaker is beneficial for semi-automated dosing or sampling of samples.

• A wide range of accessories are available for attachment of any flask or vessel.

• If the load sensor detects any type of imbalance from the shaker it will reduce the shaking motion.

Operating features • Precise Orbital shaking action. • Powerful speed range :

30~500RPM-Vibration free.

Programmable shaking motion

Programming parametersMaximum Number of segments in one (1) pattern (Cycle) 20Maximum Number of Patterns (Cycle) saved 20

Shaking Motion-Forward & Backward, PauseTime 1min to 99hr 59minRPM 10 to 500

• Adopted bright VFD display, and capacitive touch sensor button. • Digital timer : 1min 99hr 59min, delayed ON / OFF.

Specifications & Ordering Informations

Model SKC-6075 SKC-6100 SKC-6200 SKC-7075 SKC-7100 SKC-7200Control system FeedbackcontrolPIDDisplay VFD

Shaking system

Motion type OrbitalSpeed range1) (RPM) 30 to 500Accuracy at 100 RPM ±1Amplitude size (mm / inch, dia) 19 / 0.74 25 / 0.98 50 / 1.96 19 / 0.74 25 / 0.98 50 / 1.96

Dimensions

Platform (W×D) (mm / inch)

Small 580×520 / 22.8×20.5 755×520 / 29.7×20.5Large 660×520 / 26.0×20.5 885×520 / 34.8×20.5

Overall (W×D×H) (mm / inch)582.8×618 ×122.2 754.8×662×122.2

22.9×24.3×4.8 29.7×26.1×4.8Net weight (kg / Ibs) 65 / 143.3 75 / 165.4

Electric requirements (230V, 50 / 60Hz) 0.4ACat. No. AAH30105 AAH30115 AAH30125 AAH30205 AAH30215 AAH30225Electric requirements (120V, 50 / 60Hz) 0.8ACat. No. AAH30106 AAH30116 AAH30126 AAH30206 AAH30216 AAH30226

1)Duetohigherspeedrangebetween350rpmand500rpm,werecommendthattheshakersneedextraattachmenttobefixedontheflooroftheworkingplace.

92 Operating features

• Select between orbital or reciprocating motion.

• Speed range: 10 to 300 rpm.

• Programmable shaking motion. - Run time: 10 sec to 999 hr 59 min 59 sec. - Forward & Backward, Pause: 10 sec to 59 min 59 sec.

• Maximum orbit size. - 40mm dia. (1.6″ dia.) for SK-300, 600. - 70mm dia. (2.8″ dia.) for SK-71.

• Digital LED display for speed and shaking motion.

Constructional features • Brushless DC motor creates a smooth and quiet uniformed shaking

motion. • To prevent spillage from flasks and tubes the shaker gently starts

up and gently stops. • This unique shaker stops and starts at the always same position.

This shaker is beneficial for semi-automated dosing or sampling of samples.

• Low-profile design useful makes it possible to stack multiple units on one rack.

• Highly chemically resistant and durably manufactured. • Wide range of accessories are available.

SK-300Optional Accessories •Universal/Dedicatedplatforms,Rubber

mats,Universalattachments. see page 97-101 •Flaskclamps,Funnelclamps

•Testtuberacks,Springwireracks •Microplateholders •Labsticker •Stagerack(max.4stages)

Dual-Action ShakersBenchtop platform shakers with advanced dual-shaking features, for flask up to maximum 6L.Performances orbital or reciprocating action and variable-speed control provided gentle to vigorous agitation. Offers user-friendly operating and safety features for reliable shaking of lab glassware.

Shakers


Model SK-300 SK-600 SK-71

Shaking system

Motion type OrbitalorReciprocatingmotionselectableSpeed range (RPM) 10 to 300

Timer Runtime:10secto999hr59min59secForward&Backward,Pause:10secto59min59sec

Amplitude size (mm / inch, dia.) 20,30,40/0.8,1.2,1.6Available-Standard30/1.2 30,40,50,60,70/1.2,1.6,2.0,2.4,2.8 Available - Standard 30 / 1.2

Recip stroke length (mm / inch) 20,30,40/0.8,1.2,1.6Available-Standard30/1.2 30,40,50,60,70/1.2,1.6,2.0,2.4,2.8 Available - Standard 30 / 1.2

Dimensions

Platform (W×D) (mm / inch) 350×350 / 13.8×13.8 450×450 / 17.7×17.7 755×481 / 29.7×18.9

Overall (W×D×H) (mm/inch)410×490×150 / 16.1×19.3×5.9

510×595×150 / 20.1×23.4×5.9

820×610×166 / 32.3×24.0×6.5

Net weight (Kg / lbs) 24.0 / 52.9 29.0 / 63.9 50.0 / 110.2Electrical Requirements (230V, 50 / 60Hz) 0.2A 0.2A 0.2ACat. No. AAH31105K AAH31205K AAH31305KElectrical Requirements (120V, 50 / 60Hz) 0.4A 0.4A 0.4ACat. No. AAH31106U AAH31206U AAH31306U

93

Economic ShakersThe Distinctive and economical SKF models offer the most felicitous shaking motionTwo types of shaking motions (orbital or reciprocating), four types of an orbit or reciprocating lengths. The compact and interchangeable platform design accommodates various types and sizes of vessels and suitable for use in chambers.

Shakers

Operating features • 12 options with different amplitude sizes and shaking motion

(orbital or reciprocating) are available.

• Speed range: selective Max. RPM for each models. - 10 to 500, 450, 400 300, 350, 250 rpm.

• Programmable shaking motion. - Delay On / Off Time: 10 sec to 999 hr 59 min 59 sec. - Forward & Backward, Pause: 10 sec to 59 min 59 sec.

• Max. orbit or reciprocating size. (Factory fixed) - 7, 13, 19 mm dia, [0.3″, 0.5″, 0.75″ dia.] for SKF-2000 series. - 13, 19, 25 mm dia, [0.5″, 0.75″, 1.0 dia.] for SKF-3000 series.


• A large selection of attachments is provided for the use of various vessels and sizes.

- Interchangeable top platforms for flasks, dishes or microplates available separately. (Dual Stacking Tray)


Model SKF-2025 SKF-2050 SKF-2075 SKF-2025R SKF-2050R SKF-2075R

Shaking system

Motion type Orbital Orbital Orbital Reciprocating Reciprocating ReciprocatingSpeed range (RPM) 10 to 500 10 to 400 10 to 300 10 to 450 10 to 350 10 to 250Accuracy at 100 RPM ± 2

Timer DelayOn/OffTime:1minto999hr59min Forward&Backward,Pause:10secto59min59sec

Amplitude size (mm / inch) 7 / 0.3 13 / 0.5 19 / 0.7 7 / 0.3 13 / 0.5 19 / 0.7

DimensionsPlatform (W×D) (mm / inch) 320×260 / 12.6×10.2Exterior (W×D×H) (mm / Inch) 355×375×140 / 14.0×14.8×5.5Net weight (kg / Ibs) 20 / 44.1

Electrical Requirements (230V, 50/60Hz) 0.2 A 0.2 A 0.2 A 0.2 A 0.2 A 0.2 ACat. No. AAH3A105 AAH3A115 AAH3A125 AAH3A205 AAH3A215 AAH3A225Electrical Requirements (120V, 50/60Hz) 0.4 A 0.4 A 0.4 A 0.4 A 0.4 A 0.4 ACat. No. AAH3A106 AAH3A116 AAH3A126 AAH3A206 AAH3A216 AAH3A226

Model SKF-3050 SKF-3075 SKF-3100 SKF-3050R SKF-3075R SKF-3100R

Shaking system

Motion type Orbital Orbital Orbital Reciprocating Reciprocating ReciprocatingSpeed range (RPM) 10 to 400 10 to 300 10 to 300 10 to 350 10 to 250 10 to 250Accuracy at 100 RPM ± 2

Timer DelayOn/OffTime:1minto999hr59min Forward&Backward,Pause:10secto59min59sec

Amplitude size (mm / inch) 13 / 0.5 19 / 0.7 25 / 1.0 13 / 0.5 19 / 0.7 25 / 1.0

DimensionsPlatform (WxD) (mm / inch) 350×350 / 13.8×13.8Exterior (WxDxH) (mm / Inch) 410×490×140 / 16.1×19.3×5.5Net weight (kg / Ibs) 30 / 74.25

Electrical Requirements (230V, 50/60Hz) 0.2 A 0.2 A 0.2 A 0.2 A 0.2 A 0.2 ACat. No. AAH3A305K AAH3A315K AAH3A325K AAH3A405K AAH3A415K AAH3A425KElectrical Requirements (120V, 50/60Hz) 0.4 A 0.4 A 0.4 A 0.4 A 0.4 A 0.4 ACat. No. AAH3A306U AAH3A316U AAH3A326U AAH3A406U AAH3A416U AAH3A426U


• Microprocessor PID controller provides feedback to the motor to maintain constant rpm.

• Suitable at even low speeds for low rpm sensitive experimental tests.

- Speed range : 50 to 300 rpm • One-touch timer facilitative for time-dependent studies. - 1 min to 99 hour 59 min • Orbit size: 13mm dia. [0.51″ dia.]


Constructional features • Brushless DC motor creates a smooth, quiet, and uniformed

shaking motion. • The VFD controller display is quick and easy to view set up speed

and operational speed. • Designed for Portability, constructed with a lightweight plastic

body for facilitative use in experimental chamber. (incubator and etc)

• Removable rubber mat can be used to transport well-pates (Max. 6 ea) and dishes-optional.

• Brushless DC motor creates a smooth, quiet, and uniformed shaking motion.

• Highly chemically resistant and durably manufactured. • Wide range of accessories are available.

CMS-350Optional Accessories •UniversalRubbermats,Universal

attachments. see page 97-101 •Flaskclamps,Funnelclamps

•Testtuberacks,Springwireracks •Microplateholders •Labsticker

Mini ShakersCompact and lightweight design for easy mobility and for use in areas with limited space.The real-time RPM controlling is responsive with the speed control knobIdeal for hybridization, immunocytochemistry, gel staining/destaining, and other bioscience applications.

Shakers


Model CMS-350Control system FeedbackcontrolPIDDesplay VFD

Shaking system

Motion type OrbitalSpeed range (RPM) 50 to 300Accuracy at 100 RPM ±5Timer 1min. to 99hrs. 59min.Orbit size (mm / inch, dia) 13 / 0.51Max. load (kg / Ibs) up to 4 / 8.81

MaterialRubber mat (standard) PP+RubberBody PP

Dimensions

Rubber mat (W×D) (mm /inch) 276×276 / 10.87×10.87Platform (W×D) (mm /inch) 250×250 / 9.8×9.8Overall (W×D×H) (mm /inch) 276×334×130 / 10.9×13.1×5.1Net weight (Kg / lbs) 8 / 17.6

Permissible relative temperature (℃ / ℉) 5~40 / 41~104Electrical Requirements AV100~240V,50/60Hz

Cat. No. KR Plug AAH3B1115KUS Plug AAH3B1115U

95

Adjustable tilt angle and variable digital speed controller provides any possible movement for outstanding rocking or waving results. Removable tray and digital timer can be applied to variety purposes- Ideal for ELISA, enzyme immunoassays, protein synthesis, hybridization staining or

destaining gels, pharmaceutical profiling, and among other laboratory applications.

Operating features • Suitable at even low speed (10rpm) for sensitive experimental tests.

• Digital speed control provides a gentle to vigorous motion. - Rocking shaker: 5 to 100 rpm. - Waving shaker: 8 to 100 rpm.

• User friendly, tilt angle setting can be adjusted to fit user’s exper-imental needs.

- Rocking shaker: Tilt 7 ~ 13° adjustable. - Waving shaker: Tilt 0~ 13° adjustable.

• One-touch timer facilitative for time-dependent studies. - 1 min to 99 hour 59 min.

Constructional features • Brushless DC motor creates a smooth and quiet uniformed

shaking motion.

• The controller display adopts VFD. It is easy to indicate speed set up and operating condition.

• Designed for Portability, constructed with lightweight materials for convenient use in an experiment chamber.

• 3 type of removable trays surface can be used to transport tubes, well-pate and etc.

(Included Dimpled mat, and optional Rubber mat, Universal harness)

CRS-350 / CWS-350Included Accessories •DimpledMatOptional Accessories •RubberMat

see page 97-101 •UniversalHarness

Specifi cations & Ordering Informations

MODEL CRS-350 CWS-350Control system FeedbackcontrolwithPIDDesplay VFD

Shaking system

Motion type Rockingtype Waving TypeSpeed range (RPM) 5 ~ 100 8 ~ 100Accuracy at 100 RPM ±5Tilt angle 7 ~ 13° 0 ~ 13°Max. load (kg / Ibs) 5 / 11.02

MaterialDimpled mat (standard) PP (Polypropylene)+SiliconeBody PP (Polypropylene)

Permissible ambient temperature (℃/℉) 5~60 / 41~140

DimensionTray (W×D) (mm / inch] 276×276×10.87×10.87Overall (W×D×H) (mm / inch) 276×320×150 / 10.87×12.6×5.91Net weight (kg / Ibs) 3.7 / 8.16

Electrical Requirements AV100~240V,50/60Hz

Cat. No.KR Plug AAH391115K AAH381115KUS Plug AAH391115U AAH381115U

Rocking & Waving ShakersShakers


• Vertical reciprocating action.

• Speed range: 50 to 300 rpm.

• Time range: 0~60min / continuos operation.

• Maximum shaking width: 40mm. (1.6″)

• Digital LED speed indicator.

Constructional features • Easy to use, comes in a wide range of rpm setting which covers

most applications.

• Precision of speed control, feedback loop to a digital controller.

• Standard timer range 0-60 minutes, can be overridden upon request.

• End of shaking session unit stops while an audible alarm sounds.

• Easily adjustable holder/maximum of 5 holders per each side. (10 total)

* Funnel capacities (per each side)

Capacity Round type funnel Slim type funnelunder 500ml 3-5 5500ml 3 31L - 3

RS-1 Included Accessories •Funnelholder6sets

(Orderinginformation-Cat.No.:AAA32501)

Separatory Funnel ShakersIntensive vertical reciprocating quick solvent extraction shaking unit.

The separatory funnel shaker is able to shake six samples in identical conditions for any series or comparative protocols in chemistry, biotech, and medical labs.

Shakers


Model RS-1

Shaking system

Motion type Vertical reciprocatingSpeed range (RPM) 50 to 300Timer 60 min or continuous operationVertical stroke length (mm / inch) 40 / 1.6

DimensionsOverall (W×D×H) (mm / inch) 445×730×505 / 17.5×28.7×19.9Max. load per each side (kg / lbs) 3.0 / 6.6Net weight (Kg / lbs) 24.0 / 52.9

Electrical Requirements (230V) 50Hz,0.4A 60Hz,0.4ACat. No. AAH32012K AAH32015K

97

Accessories & Options for ShakersShakers

Universal platforms & Flask clamps, Funnel clamps The universal platforms provide flexibility for mixing different sized assortment of test tubes and glassware on a single platform. Available in

different size assortment of clamps for Erlenmeyer flasks and Separatory funnels.

Description SK-300 SK-600 SK-71 CMS-350 SKF-2000 [R] SKF-3000 [R]Universal platform Cat. No. AAA31501-V1 AAA31502-V1 AAA31503-V1 AAA3B501 AAA3A501 AAA31501-V1

Max. mountable funnel clamps *Cat. No.

Erlenmeyer flask sizeSteel Plastic

AAA23550 AAA30570 for 50mL 36 55 99 16 21 36AAA23551 AAA30571 for 100mL 28 44 74 9 14 28AAA23552 AAA30573 for 250ml 13 24 39 9 8 13AAA23556 AAA30574 for 300mL 13 24 39 9 8 13AAA23553 AAA30575 for 500ml 10 16 25 5 5 10AAA23554 AAA30576 for 1L 5 8 14 4 3 5AAA23555 AAA30577 for 2L 4 5 9 1 - 4AAA23557 - for 2.8L 2 4 6 - - 2AAA23558 - for 4L 1 2 4 - - - AAA23559 - for 6L 1 2 4 - - -

Max. mountable funnel clamps *Cat. No. Separating funnel size

AAA23562 for 250mL 4 6 11 3 4 4AAA23563 for 500ml 3 4 9 2 3 3AAA23564 for 1L 2 3 5 2 2 2AAA23565 for 2L 1 2 4 - - 1

Description SKC-6000 Series SKC-7000 SeriesUniversal platform Cat. No. AAA30501 AAA30503 AAA30502 AAA30504

Dual universal platform Cat. No. - - AAA30541 1) AAA30542 1)

Universal platform size (mm / inch) 580×520 / 22.8×20.5 660×520 / 26.0×20.5 755×520 / 29.7×20.5 885×520 / 34.8×20.5Cat. No.

Erlenmeyer flask sizeSteel Plastic

AAA23550 AAA30570 for 50mL 84 96 108 (under 108) 126 (under 126)AAA23551 AAA30571 for 100mL 54 66 72 (under 72) 84 (under 84)AAA23552 AAA30573 for 250ml 33 39 42 (under 42) 51(under 51)AAA23556 AAA30574 for 300mL 28 32 36 40AAA23553 AAA30575 for 500ml 20 24 27 30AAA23554 AAA30576 for 1L 14 16 18 20AAA23555 AAA30577 for 2L 8 11 12 13AAA23557 - for 2.8L 6 7 9 11AAA23558 - for 4L 4 6 8 9AAA23559 - for 6L 3 4 6 7

Max. mountable funnel clamps *Cat. No. Separating funnel size

AAA23562 for 250mL 14 16 18 20AAA23563 for 500ml 9 10 11 14AAA23564 for 1L 7 8 9 12AAA23565 for 2L 5 6 7 8

* Flask clamps and funnel clamps for universal platform are sold separately.1)Universalplatformattachmentsaremountedonthedualuniversalplatform,Underthedualuniversalplatformaremountedonly50ml,100ml200ml-Refertotheabovechart.(Distancebetween

platforms is 175mm)

Universal Platforms Flask Clamps Funnel Clamps

98


Spring wire racks Ideal for holding a wide variety of tubes, flasks, and other glassware. All component are made of stainless steel.

Description SK-300 SK-600 SK-71 CMS-350 SKF-2000 [R] SKF-3000 [R]Spring wire racks Cat. No. AAA31521 AAA31522 AAA31523 AAA3B511 AAA3A521 AAA31521-V1

Max. inserting flask clampsErlenmeyer flask size

for 50mL 16 25 40 12 12 16for 100mL 9 16 28 6 6 9for 250ml 4 9 15 3 3 4for 300mL 4 9 15 3 3 4for 500ml 4 5 10 3 3 4

for 1L 2 4 8 2 2 2for 2L 1 2 4 - - 1

for 2.8L 1 2 4 - - 1

Description SKC-6000 Series SKC-7000 SeriesSpring wire racks Cat. No. AAA30521 AAA30522 AAA30523 AAA30524

Max. inserting flask clampsErlenmeyer flask size

for 50mL 30 35 45 50for 100mL 20 24 28 32for 250ml 12 15 18 21for 300mL 12 15 18 21for 500ml 9 12 15 18

for 1L 6 8 10 12for 2L 4 5 6 7

for 2.8L 3 3 4 5

Universal Platforms (for SKC)

Spring wire racks (for SKC)

Dual Universal Platforms (for SKC)

Spring wire rack (for SKF)

99


Universal attachments (for SKC)

Test Tube Racks

Dimpled mats (for CRS / CWS)

Universal attachments (Utility carriers) Several adjustable clamping bars to quickly secure a variety of glassware or tubes on non-skid rubber mat. Suitable for different sizes of flat

bottomed flasks.

Models SK-300 SK-600 SK-71 CMS-350 SKF-2000 [R] SKF-3000 [R] SKC-6000 Series SKC-7000 SeriesCat. No. AAA31511 AAA31512 AAA31513 AAA3B521 AAA3A511 AAA31511 AAA30511 AAA30512 AAA30513 AAA30514

Test tube racks Highly durable stainless steel racks with adjustable angle and tube height support. Simply release and mount racks. Requires an universal

platform which are sold separately.

Cat. No. Description Mountable capacity of racks*AAA23581 for 86 test tubes 8mm dia. (0.3”)

AAA23582 for 86 test tubes 10mm dia. (0.4”)






* No declination※Wecanmanufactureothersizeoftesttuberackstomeetyourspecificrequirements.Contactusfordetails.

Dimpled Mat

Models SKF-2000 [R] CWS/CRS-350Cat. No. AAA3A532 AAA38502

SK-300 SK-600 SK-71 CMS-350 SKF-2000[R],3000[R]Series SKC-6000 Series SKC-7000 Series2EA 4EA 6EA 2EA 2EA 8EA 9EA 9EA 12EA

Universal Harness

Models CWS/CRS-350Cat. No. AAA38503

100


Dedicated platforms If using a single flask size only, the dedicated platforms provide maximum capacity, and come with clamps installed. Provided standard clamp

size are 250mL and 500mL, but possibly provide the other size of clamps also.

Cat. No. DescriptionAAA31551 AnuniversalplatformforSK-300,SKF-3000serieswith250mLflaskclamps13ea

AAA31552 AnuniversalplatformforSK-300,SKF-3000serieswith500mLflaskclamps10ea

AAA31561 AnuniversalplatformforSK-600with250mLflaskclamps24ea

AAA31562 AnuniversalplatformforSK-600with500mLflaskclamps16eaAAA23631 AnuniversalplatformforSK-71with250mLflaskclamps39eaAAA23632 AnuniversalplatformforSK-71with500mLflaskclamps25eaAAA23611 AnuniversalplatformforSI-300serieswith250mLflaskclamps13eaAAA23612 AnuniversalplatformforSI-300serieswith500mLflaskclamps9eaAAA23621 AnuniversalplatformforSI-600serieswith250mLflaskclamps18eaAAA23622 AnuniversalplatformforSI-600serieswith500mLflaskclamps13eaAAA23631 AnuniversalplatformforIS-971serieswith250mLflaskclamps39eaAAA23632 AnuniversalplatformforIS-971serieswith500mLflaskclamps25ea

*Adedicatedplatformissoldwithsettingeachmax.mountableamountofflaskclampson.

Rubber mats The non-skid rubber mats are designed for low-speed applications, allow for quick addition or removal of flasks, plates or tubes.

Models SK-300 SK-600 SK-71 SKF-2000 [R] SKF-3000 [R] SKC-6000 Series SKC-7000 SeriesCat. No. AAA31531 AAA31532 AAA23533 AAA3A531 AAA31531 AAA30531 AAA30532 AAA30533 AAA30534

Models CMS-350 CWS-350 CRS-350Cat. No. AAA38501

Plastic Clamps Dedicated Platform

Rubber mats (for SKC)

101


Microplate holders Available in three styles. A Tower type holder, two Flat types (small and large) and a Single type. The large flat holders will hold 4 standard or deep

well plates. The small flat holders will hold 3 standard or deep well plates. The single holders will hold only 1 standard or deep well plate.

Microplate holders Tower type Flat-A type (large) Flat-B type (small) Single typeCat. No. AAA23651 AAA23652 AAA23653 AAA23654

Max. mountable holdersSK-300 6 - 2 8SK-600 10 2 3 15SK-71 16 3 5 25

CMS-350 6 - - 6SKF-2000 (R) 4 - 1 6SKF-3000 (R) 6 - 2 8

SKC-6000 SeriesAAA30501 16 3 4 20AAA30503 19 4 5 23

SKC-7000 SeriesAAA30502 22 5 6 25AAA30504 25 6 7 28

*Microplateholdersneedtobemountedonanuniversalplatformwhichissoldseparately.

Dual stacking tray for Microplate

Models CMS-350 SKF-2000 [R]Cat. No. AAA3B531 AAA3A541

Dual stacking tray size 319×285×96 / 12.6×11.2×3.8

319×285×96(105) / 12.6×11.2×3.8

Max. mountable Microplate

Total 12EA(each try for 6EA)

Total 12EA(each try -6EA)

Lab Sticker Alternative to flask clamps for securing vessels to a shaker platform the ideal way to secure containers such as bottles and dishes on the universal

platform is that cannot be held with conventional flask clamps. The lab sticker can be re-generated to a new condition by washing it with mild detergent and water. It cannot be used in water baths. For safe operation, suggest increasing the RPM gradually.

Description Lab StickerLab Sticker Cat. No. AAA30551Size (mm / inch, W×D×H) 200×200×5 / 7.9×7.9×0.2

*LabStickerneedtobemountedonanuniversalplatformwhichissoldseparately.

Large tray for Microplate

Models CMS-350 SKF-2000 [R]Cat. No. AAA3B532 AAA3A542

Tray size 396×273×21 / 15.6×10.7×0.8

396×273×21 / 15.6×10.7×0.8

Max. mountable Microplate Total 9EA Total 9EA

Dual stacking tray for microplate Microplate Holders Lab Sticker

Documents

Shakers - kromat.hukromat.hu/UserFiles/files/labormuszer/Jeiotech síkrázók.pdf · Cat. No. AAH31105K AAH31205K AAH31305K Electrical Requirements (120V, 50 / 60Hz) 0.4A 0.4A 0.4A