SGJ-UV1100 Automatic UV Spot coating machine

Performance And Characteristics: This Machine is used for both flood and spot varnishing on printing works with UV coating and water-based coating (optional), with blanket or flexo.. It is suitable for spot or full coating on words and graphics in books, advertisement sheets, color paperboard to enhance its dimensional quality. Many safeguards and human-based operating procedures ensure user safety and convenience.

Imported elements for main bearings and electrical components are adopted in the machine.

1.Feeding section High-speed feeder free from maintenance, lubrication, controlled by simple cam, easy concentrated adjustment is adopted as well as paper deflexion system monitored by bonding of mechanical action and imported needle sensors for front and side paper stoppers to ensure sheets well-positioning, correct register. When sheets are found deflexion, pneumatic paper-pressing mechanism will be in action and feeding stops to protect plate roller and avoid waste. ● Pre-stack table for machine non-stop is optional.

2.Varnishing section Grippers transportation system. Impression roller and plate roller is released and pressed pneumatically. UV varnish supply system composed of reverse running rollers makes coating more smooth. UV tank is of automatic temperature control by water. ● Chamber doctor blade system with ceramic anilox is optional. 3.IR drying section This is used for water-based varnish (optional).

4.UV curing section This section is composed of high-volt lamps, reflectors, electrical control, cooling, air-exhausting systems. Automatic temperature control system is equipped to avoid sheets deformation. Full-capacity and half-capacity are designed for lamps，that is to say, all lamps work for normal running, if lack of sheets, all the lamps will switch into half capacity to save power.

5.Delivery section Turnover safety door is designed greatly convenient for operator. Speed-regulating suction roller mechanism assistant for delivery, cooling paper-pressing fans ensure big-size sheet delivered smoothly. ●Air cooling system is optional to keep coating quality.

Main technical parameters: Model SGJ-UV1100 SGJ-UV1300 Max. sheet size 850x1100mm 850x1285mm Max. coating size 760x1060mm 800x1260mm Min. sheet size 310x400mm 310x400mm Max. working speed 5000sph 5000sph Total electric consumption 45kw 45kw No. x UV power 3x9.75kw 3x9.75kw No. x IR power(optional) 15x1.5kw 15x2kw Paper weight 80-600g/m2 80-600g/m2 Weight 6.6t 7.5t Overall dimensions 7600×2600×1950mm 7600×2900×1950mm

Note: the speed is based on the paper size and paper weight

basic components:

〔1〕 Feeding Section 〔2〕 Varnishing Section 〔3〕 IR Drying Section 〔4〕 UV Curing Section 〔5〕 Delivery Section

1.4 the production place of main parts 〔1〕the main electrical components and the PLC system: adopting the Schneider from From; the PLC from China . 〔2〕the bearings：the NSK from Japan 〔3〕main motor：the motor is from China , or from Siemens or ABB. 〔4〕the belt：from Switzerland HABASIT. 〔5〕air compressor：made in China. Packing list:

spare parts and documents number name amount unit note

1 blanket 1 pc 1100 model: 1000×1100（length ×width） 1300 model: 1000×1300（length ×width）

2 air compressor 1 pc V0.08/7 3 vacuum pump 1 pc ZYBW80E 4 heating oil tank 1 pc whole suit 5 oil tank 1 pc whole suit 6 handle 1 pc diagram no.：GUVJ1100.2.6-11 7 handle 1 pc diagram no.：GUVJ1100.2.8-16 8 handle 1 pc diagram no.：GUVJ1100.2.9-38

9 big oil pan under the main part

1 pc diagram no.：GUVJ1100.5-3

10 foot plate 6 pc diagram no.：GUVJ1100.5.5 11 base plate 14 pc diagram no.：GUVJ1100.5-32 12 AL blowpipe 2 pc Φ150 13 service manual 1 pc operation instruction

14 Other components 1 pc The service manual of the inverter and temperature controller

15 quality certificate 1 pc

instruments number name amount unit note

1 oil gun 1 pc

2 6″6”two-claw shackle

1 pc

3 Melting device for conveyer belt

1 pc SY-99

4 adjustable spanner 2 pc 6”、12”

5 spanner with two heads(a whole suit)

7 pc 6×7、8×10、13×16、12×14、17×19、24×27、32×36，

6 test pencil 1 pc

7 spanner with 6 corners

1 suit 2.5;3;4;5;6;8;10;12.

8 Wooden Philips and straight screwdriver

2 pc 6”

9 sleeve 1 pc 24 spare part: steel blade ( one piece ) number amount amount unit note 1 micro switch 1 pc XCJ-125 2 micro switch 1 pc XCJ-128 3 relay 2 pc MY2NJ.24VDC 4 time relay 1 pc H3Y-2-10S.220VAC 5 relay 1 pc MY2NJ.220VAC 6 oil hole 5 pc 3/8″XФ4 7 joint-type oil cup 5 pc M6

8 rubber ring of suction mouth

20 pc

9 gripper spring 15 pc diagrams no.：GUVJ1100.3.2-12 10 lower clamping plate 2 pc diagram no.：GUVJ1100.2.8-17 11 Upper clamping plate 2 pc diagrams no.：GUVJ1100.2.8-18 12 gripper 2 pc diagrams no.：GUVJ1100.2.9-12 13 spring 1 pc diagrams no.：GUVJ1100.2.9-17 14 gripper shaft 1 pc diagrams no.：GUVJ1100.2.9-27 15 gripper cushion 17 pc diagrams no.：GUVJ1100.2.9-35 16 spring 4 pc diagrams no.：GUVJ1100.4.3-14 17 chain head 4 pc diagrams no.：GUVJ1100.3.2-11

18 torsion spring（ left, right one each five）

10 pc diagrams no.：GUVJ1100.3.2-7

19 UV lamp 1 pc

20 glue for junction of conveyer belt

1 bottle

21 conveyer belt 3 pc 1.2(thickness)X25(width)X2250(length)mm

Optional parts：

（1）non-stop feeder and delivering one set （2）IR drying one set （3）air conditioner cooling two pieces （4）magic doctor blade and anilox roller one set （5）anilox roller （6）Touch screen one set USD900.00NOTE: A) the standard machine configuration is rubber roller coating system which could adjust varnish according to need. B) the advantage of anilox roller: make coating more even; but cannot change varnish amount. If change varnish amount , it have to change a new anilox roller with high cost.

After sale services and component replacement

During the period of quality guarantee, we supply the spare part in free for replacement.

Packaging

Adopts moisture-proof and shock-proof packaging which is suitable for long-distance road transportation and various types of weather conditions. A full set of maintenance and operation manuals is included.

Delivery Date

Within 60 days after payment of deposit.

Terms of Transportation

Seller shall deliver equipment at its factory and may arrange transportation for Buyer but freight shall be for Buyer’s account.

Terms of Payment

50% deposit by T/T upon final confirmation; balance by T/T before shipment.

Quality Assurance

Seller provides a 12-month guarantee period.

Training, Installation and Test Run

A. Seller shall provide training in seller’s factory; or Seller send the engineer to buyer’s factory,

but Buyer shall pay the round-trip air fare, accommodation, food and so on.

Behbud Sanat Shams AsiaAddress: no 22, floor 8, Alborz complex department, Baq Zamani Street, Beheshti sq,Kamalshahr, karaj, AlborzWeb: www.behbud-sanat.comTel: +98-2634718944Phone: Mr.Rahmani +98-9123634015Ms.Baghernia +98-9197863408