Upload
phamdiep
View
224
Download
6
Embed Size (px)
Citation preview
Welcome
SevenCs Beijing Workshop18 October 2016
Cliff Lim, SevenCsBeijing Situo Ocean, SevenCs Reseller
Agenda
SevenCs and ChartWorld
ENC Tools
New Products
ECS
ECS Demo
Q&A
Welcome
Introduction
Founded in 1992
Ex-UKHO owned company
Created S-57 and S-52 Standard as used today for
the IHO
Part of the core working group for defining S-100
and beyond, along with Transas, Jeppesen, Esri, IIC,
Furuno, Geomod, and Caris.
Experience along the entire value chain of ENCs –
Production Software, Production and Encryption,
Data Management, Distribution and Navigation
SevenCs and ChartWorld
Company structure
ChartWorld International
ChartWorld Europe
SevenCs Germany
ChartWorld Germany
ChartWorld Asia Pacific
SevenCs and ChartWorld
Founded: 1992Staff: 85+ Offices:
Expertise• More than 20 years an active member in various IHO working groups for S-57, S-52, S-63 and S-100• Member of Inland ENC Harmonization Group (IEHG) and IENC Harmonization WG• Regular participant at TSMAD • EU Efforts project (Port ECDIS) • CIRM member
SevenCs and ChartWorld
Locations
Product scope
S-57 Kernel
ChartServer
ECDIS as a service
Electronic charts and publications
Customized chart production
Chart Distribution Solutions
Specialized ECS software for Pilots, Inland and Navy
Hydrographic ENC Tools
SevenCs and ChartWorld
Products
Overview
ENC Designer with ENC Manager
ENC Contour Generator
ENC Optimizer
ENC Analyzer
ENC Cartographer
ENC Encryptor
ENC Designer with ENC Manager
ENC Designer is a graphical tool which allows you to create, edit and
update ENCs, IENCs and AMLs;
The powerful software allows S-57 data or geo-referenced raster data
objects to be created, modified, and edited whilst providing a plot
function for visual data verification.
ENC Manager is a workflow environment for the maintenance of S-57
data.
It can be used in the production of new ENCs, IENCs, AMLs, updates,
new editions and S-57 Exchange Sets.
Products
ENC Designer with ENC Manager
Products
ENC Contour Generator
ENC Contour Generator allows automatic generation of depth contours at user defined intervals from xyz data;
3D visualisation of source data and contouring results;
Includes a comprehensive Coordinate Reference System (CRS) Manager;
Supports “safe side” contour smoothing and contour generalisation.
Products
ENC Optimizer
RENC recommended tool to reduce data volumes and maximize display performance;
Automatic setting of official or user defined SCAMIN values;
Automatic correction of digitizing errors, e.g. duplicate geometry, non significant characters etc.
Logfile allows single optimizations to be stepped through in ENC Designer;
Filter function allows the application of single optimization functions to particular objects.
Products
ENC Analyzer
ENC Analyzer is a joint development between L-3 Oceania and
SevenCs;
Powerful data validation tool which performs over 600 checks
according to IHO S-58 (Recommended ENC validation checks);
Works as a stand alone tool or in combination with ENC Designer
and ENC Manager;
Individual results can be checked via the log file and highlighted in
ENC Designer.
Products
ENC CartographerENC Cartographer allows the derivation of INT1/INT2 paper charts from one or more S-57 ENC cells;
Creation of Zones of Confidence (ZOC) diagrams using S-57 quality objects;
Support of INT2 borders and graticules, & generation of marginalia and text;
Tidal Stream and Compass Rose paper symbols derived from S-57objects;
*Supports Chinese characters
Products
ENC Encryptor
ENC Encryptor allows S-57 ENC producers to encrypt and sign their data according to the IHO S-63 Data Protection Scheme;
ENC Encryptor is delivered together with the ENC Permit Generator;
ENC Permit Generator generates the respective chart keys needed by the data users to access the data. A Data Client database can also be created and maintained;
Supports S-63 1.0 and 1.1
Products
ENC S-57 Writer
Products
Safe Software FME including S-57 Writer Plug-In allows you toconvert any Geo-Information into S-57 format;
FME = integrated collection of spatial ETL (Extract, Transform, and Load) tools for data transformation and translation.
• Create contour lines and selected soundings for incorporation in ENCs or other digital hydrographic chart products
• Detailed statistics about input data and processing result
• Import of gridded bathymetry files (e.g. BAG) or xyz input data
• Fast Contour Generation from Nautical Elevation Model
• Sounding selection function
ENC Bathymetry Plotter
orange line: nautical elevation modelblue line: realtime ground situation
Bathymetry Plotter – Nautical Elevation Model
New Tools coming up
Outlook to Nautilus
Nautilus Viewer
Nautilus Validator
S-101 reader/writer for FME
S-100 Data Manager
New Tools coming up
Outlook to Nautilus
Create your own Bathymetry ENCs within seconds!
EC2007 ECDIS Kernel
EC 2007 Kernel
SevenCs has more than 20 years of Kernel experience
The development is done in Germany, a stable EU and NATO
country which is member of IMO and IHO
More than 500 Kernel customers have chosen our product
Available on Windows and Linux
80% of all defence companies utilize EC 2007 ECDIS Kernel
For more than 20 years SevenCs is member of:
• TSMAD, DIPWG and DPSWG of IHO
• InlandENC Harmonization Group
• NATO GMWG
EC2007 ECDIS Kernel
EC2007 Kernel
Over 1000 functions for chart display, chart handling, and navigation
Integrated in many type-approved ECDIS applications
Prefilled with SevenCs own small scale world data set
Constantly updated to reflect the latest chart display standards
Available for Windows and LinuxLow entry development and run-time software licenses
ENC with suppressed land areas on satellite
imageAML 3.0
EC 2007 ECDIS Kernel
EC 2007 Kernel
Electronic Navigational Chart (ENC)
ARCS and BSB Raster Charts
IENC Inland Module
3D Module
Satellite Image Overlay
EC 2007 ECDIS Kernel
EC 2007 Kernel
AML Display Module
MIL-2525 Module
VMap Display Module
DNC / TOD Module
DTED
ARINC 424-18
EC 2007 ECDIS – Major Changes since 5.14
5.18.2 released in January 2015
5.20 released in July 2015
Improved chart rendering performance by 10 to 20% with help of multi-threading
Dedicated versions for Visual Studio 2010 and 64bit
A new set of raster symbols for very high resolutions (Full HD) is available
AIS and ARPA target symbol adjustments according to IEC 62288 Ed.1.0
New display category “Primary Chart Information Set”
for Chart Radar Systems
Optional shift of centered chart symbols to avoid overlapping
with own ship symbol
Translation functions for chart texts and pick reports
Improved AIS target managementEC 2007 Kernel
EC 2007 ECDIS – Major Changes since 5.14
New S-63 convenience functions
Handling of S-63 data servers chart portfolio, i.e. the S-63 products.txt
Routes or leg lines with corridors of different widths are supported
Support of Digital Terrain Elevation Data (DTED)
Support of ARINC 424 aviation charts
Revised and extended exception handling (SharpCoat)
EC 2007 Kernel
EC 2007 ECDIS – Major Changes since 5.14
Released in January 2015
Improved danger highlight (IEC 62288, Ed.2)
Improved display of centered symbols and texts
Graphical indication of ENCs with expired chart permits
Support of new AML 3 presentation
CLB
FAI
SED
QRT
SBO
EC 2007 Kernel
EC 2007 ECDIS – Major Changes since 5.14
EC 2007 Kernel
Released in July 2015
Driven by new editions of IEC and IHO standards
IEC 61174, Ed.4
• Definition of „Dangerous objects“ and
areas for which special conditions exists
• Danger highlight
• Revision of viewing groups
IHO S-52 Presentation Library, Ed. 4
• Indication of date dependent objects
• Indication of update history
• Pick report (displayed objects only)
EC 2007 ECDIS – Major Changes since 5.14
EC 2007 Kernel
Danger Detection and Highlight
Preslib 3.4
Preslib 4.0
EC 2007 ECDIS – Major Changes since 5.14
EC 2007 Kernel
IHO S-64, Ed. 3 (test procedures for S-63 chart handling and S-52 chart display)
• ENC Update history
• Revised and clarified tests
Support of Visual Studio 2013, openSUSE 13 and Red Hat 7
Includes test application for all S-64 Ed.3 chart display tests
EC 2007 ECDIS Kernel 5.20 / SharpCoat 1.8
EC 2007 Kernel
Includes new ChartHandler 3
ChartHandler 3
ChartHandler
Released in January 2015
Type-approved (DNV) S-63 Ed. 1.1 chart handling
• Indication of available but not installed charts (products.txt)
• Indication of expired or upcoming (30 days) expired charts
• ENC status report
Operate by touch screen or mouse
Chart installation during run-time of main application
Chart installation from remote ChartWorld ftp server
ChartHandler 3
ChartHandler
Includes “Manual Updates” and “Chart-1”
EC2007 / SharpCoat / Roadmap
EC2007 / SharpCoat
EC2007 5.22 / SharpCoat 1.10
Release April 2016
Latest Changes for S-64 Ed. 3.0.1 Compliance
DNV approved chart display
AML 3.0
ChartHandler 3.3 (DNV approved chart import, route based ENC status
report)
EC2007 5.24 / SharpCoat 1.12
Release Q4 2016
Preslib 4.0.2 (clarifications only, new editions 4.1 for Preslib and 3.1 for S-64
expected for 2017)
Nautilus
Outlook to Nautilus
Nautilus
Outlook to Nautilus
C++, C# and Java programming interfaces
Support of :
• Desktop OS Windows, Linux and MacOS
• Mobile OS Android and iOS
Use of hardware accelerated drawing by supporting individual graphical
engine programming for dedicated graphic interfaces
Use of multi-threading technology
Nautilus
Outlook to Nautilus
New SENC format, optimized with respect to
• File size, i.e. uncompressed two times smaller than AVCS ENCs,
compressed four times
• Access time
Encapsulated chart product version handling (Feature Catalogues,
Presentation Libraries)
Advanced geographic calculation engine, based on EPSG
Nautilus
Outlook to Nautilus
Technical preview
• Release in April 2016 (C++), May (C#)
• Support of S-57 chart import and S-52 chart display
Version 1.0
• Release in Q4 2016
• Support of S-63 chart encryption, automatic chart loading
Version 2.0
• Release in Q4 2017
• Support of S-100 based products, i.e.
S-101 (ENC), S-102 (Bathymetric Surface)
• Compliance with S-52 Presentation Library 4.1
Nautilus Viewer
Outlook to Nautilus
Use of GPU for drawing/rendering
Antialiasing
Support of touch gestures
IMO Layers
Day / Night
Lights on/off
Text on/off
EC2007 / SharpCoat / Nautilus – What‘s next?
IHO S-52
IEC 61174
IEC 62288
Bug-fixes, releases when required
EC2007
2016
S-52 Ed 4.0, IEC-61174 Ed 4
SharpCoat
Nautilus C++
Nautilus C#
Nautilus Java
S-100/101
Ed.4.02017 2018
Ed.4
S-100 S-101
1.8
5.20
1.14
5.26
Technical Preview 1.0
1.0
2.0
Technical Preview
1.0
1.10
5.22
Ed.4.1
DNV approved Presentation
1.12
5.24
S-52 Ed 4.1
Timeline
ChartServer
WMS
WMS Server (1.1.1 and 1.3.0) for maritime and naval chart products
Provided for Windows and Linux
Extended proprietary GetMap parameter to support:
• IHO S-52 chart settings (safety values, display categories, etc)
• Object filtering
• Chart Rotation
Support of navigation related projections, e.g. Gnomonic
Support of multiple maritime and naval chart products, i.e.
ENC, IENC, ARCS, AML, DNC/VMap, DTED and ARINC 424
Includes ChartHandler 3, desktop chart viewer and “The Chart”
ChartServer
ChartServer
New features since first version of ChartServer 4
Indication of geographic pick position in xml pick report
Optional drawing of centered symbols and text at fixed positions
(beneficial for tiling)
„The Chart“
Chart rotation
Extended parameters for client screen properties
Negation of object filter (display all except …)
Since version 4.4.4 compliant to new edition 4.0 of IHO S-52
Presentation Library
ChartServer
WMS
SevenCs World Data Set
World Overview – Web (Pseudo) Mercator (EPSG 3857) click
Mediterainean Sea – „The Chart“ click
Chart Settings
Elbe mouth click
Elbe mouth with chart settings click
ENC Overlay – Object Filter
Elbe mouth – no land areas click
Elbe mouth – object filter (only aids to navigation) click
ChartServer
WMS
Chart Products
AML 1.0/2.1 test data click
AML3 – Northsea click
DTED - Europe click
ARINC over DTED over ENC - Nice click
Vmap 1 - Mobile click
GetFeatureInfo (Pick report) click
WebAdmin click
ChartServer Roadmap
ChartServer
ChartServer 4.5
Planned release Q4 2016
DNV type approved chart display for new edition 4.0 of IHO S-52
Presentation Library
ChartHandler 3.3
- Based on latest type approved eGlobe G2
- Chart display (now for Linux as well)
Professional Touchscreen Navigation Software:- ORCA PILOT G2- ORCA NAVY G2
- ORCA RIVER
Meets all IMO standards and requirements.
Intended for both touchscreen and keyboard/ trackball operation.
Offshore, inshore and inland operation.
Software available to OEM partners.
ORCA Master G2 is a high-endECS (Electronic Chart System)specially developed for profes-sional and safe marine naviga-tion, using intuitive touchscreenoperation.
Route planning: ECDIS compliant; customizableroute parameters; revolutionary XTE lines ar-rangement; highlighted alarms while planningand sailing.
Profiles: Individualuser settings accord-ing to differentmodes, various usersor other specific re-quirements.
Info labels: All required information can bearranged (moved or adjusted) on the screenaccording to the mariner‘s needs.
Manual Fix position: Can be created from both RADARfixes and / or visual bearings. Used in special circum-stances, when GPS support is not available or doublecheck is required.
ChartLoader:Easy and fastonline chartloading, weeklyupdates andpermits.
S-mode: Simple and intuitiveoperation mode for even inex-perienced users in a demandingenvironment.
Other versions of our popular ECS designed for
Military use, use by Pilots, and Commercial use
include ORCA PILOT G2, ORCA NAVY G2 and
ORCA RIVER:
Auto-adjust of GUI controls for different
screen dimensions
Symbol filter to avoid clutter on the screen
Adjustable colors and line thicknesses for
safety contours, ships outline, EBL and VRM
Recording of ships positions and AIS targets
Supports use of official and private ENCs,
Inland ENCs, AML, bENCs and Port ENCs
ORCA NAVY G2 is planned forlater in 2016 and has all thesame functionality as ORCAMASTER G2 but is designedspecifically for smaller militarycraft such as fast patrol boats,where it isn't practical to installa full WECDIS systems but it isstill necessary to display tacticalinformation overlays such asAMLs.
Q&A
Questions?