Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
1U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
Session 3 - Renewable Energy Case Study Gerald Robinson
Tuesday August 15th 4:00-5:30 pm
2U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
Case Study in Solar PV Module Quality
Factoring Quality into Procurements
3U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
Delamination
Photo by The Green Home.com
Photo by Renewable Energy World.com
Junction Box Shorts
Photo by NREL
Diode Failure
Common Manufacturing Defects
Photo by Rising-power.de
Delamination
4U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
Field or Specification Issues
Puncture-Flexible Module
Photo by Gerald Robinson, LBL
Photo by ECMWEB.com
Field Abuse
Hail Damage
Photo by GTM
ASTM E1038 - 10
5U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
10 Largest Module Makers TC600 Test Results
DNV GL 2017 PV Module Reliability Scorecard
6U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
• Addressable: Greatly increase the odds of long-term project success with simple specifications
• Quality and safety issues go together
• Warranties are hard to enforce
• Liquidated bankruptcies and new entrants
Why Care About Module Quality?
7U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
Intense Price Pressures
8U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
Existing Test Standards – Predicting Survivability?
• IEC 61215 for Crystalline Silicon Modules
• IEC 61646 for Thin Film Modules
• IEC 62108 for CPV Modules
9U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
Actions You Can Take Selection process using NREL-Qualification Plus
https://www.nrel.gov/docs/fy14osti/60950.pdf
Specify for site conditions: Hail Marine Wind Snow loads
Third party owned – performance warranties in contract
Insurance Backed Guarantee (IBG) – provides warranty claims even in cases of liquidation, receivership, or closure of a dealer
O&M practices – Use NREL Best Practices Guide https://www.nrel.gov/docs/fy17osti/67553.pdf
10U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
Technical Specification Table of Contents
11U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
NREL Qualification Plus – Selection Criteria
https://www.nrel.gov/docs/fy14osti/60950.pdf
12U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
Qualification Plus Sampling Requirements:
1. 5 random modules from production line
2. If any module fails, the overall test is failed
3. Tests repeated at least annually
4. Certification by ILAC or IECEE laboratory
NREL Qualification Plus – Sampling
13U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
NREL Qualification Plus – Quality Management
Guide for Quality Management
• System for PV Module Manufacturing:
• Supplemental Requirements to ISO 9001 - 2008”
• ANAB or IAF approved Certification Body
14U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY & RENEWABLE ENERGY
Contact Information
Gerald RobinsonLBL, Sustainable Federal [email protected]
Rachel ShepherdFEMP, Renewable Energy Program [email protected]
https://energy.gov/eere/femp/federal-renewable-energy-projects-and-technologies