1
© 2021 Eaton All Rights Reserved Pub. No. PT161007EN / GG January 2021 Eaton is a registered trademark. All other trademarks are property of their respective owners. Eaton 9390 UPS Service Life Extension Program (SLEP) Eaton can install all new and improved electronics inside the shell of your existing UPS. Manufactured from 2004-2019, the 9390 was Eaton’s first modular UPS. With proper maintenance, it can last more than 10 years. However, all electronics have an increasing risk of wear-out failure over time as components are susceptible to heat, humidity, and dust/dirt collection. For example, see this close up photo of an open circuit on a 13-year-old 9390 printed circuit board. The trace opened due to over-current as a result of a compromised electronic component, switching the UPS to bypass where the critical load is unprotected. The Eaton 9390 SLEP is for customers with 10+ year old 9390s who want to reset the clock and get 10 more years of service life. There are numerous benefits to this program, including: Interested in this new program? Learn more and contact Eaton at Eaton.com/UPSservices Additional services included: Cleaning of contactors and wiring (replacement as necessary) UPS system calibration, functional testing and reporting 1-year warranty (7x24, 8 hour response, parts and labor) PredictPulse Remote Monitoring (1-year subscription) 10-year minimum entitlement to purchase full-service coverage Optional services: ESS Upgrade to 99% efficiency (as applicable) kVA Upgrade for additional capacity Full onsite commissioning/load bank testing services Replaced during SLEP (electronics) Optionally replace at same time (consumables) Stays (replacement not necessary) Color key: Control board Interface board Power modules Inside view of 9390 120–160 kVA UPS Fans Capacitors Mini CSB Power supplies Power supplies Fans Terminal blocks Contactors Static switch Quick implementation / minimal downtime (1 day) No change to existing footprint No electrical installation Reuse existing accessories & battery cabinets Supports corporate sustainability objectives 24 hours = >

Service Life Extension Program (SLEP)

  • Upload
    others

  • View
    13

  • Download
    0

Embed Size (px)

Citation preview

© 2021 Eaton All Rights Reserved Pub. No. PT161007EN / GG January 2021 Eaton is a registered trademark. All other trademarks are property of their respective owners.

Eaton 9390 UPS

Service Life Extension Program (SLEP)

Eaton can install all new and improved electronics inside the shell of your existing UPS.

Manufactured from 2004-2019, the 9390 was Eaton’s first modular UPS. With proper maintenance, it can last more than 10 years.

However, all electronics have an increasing risk of wear-out failure over time as components are susceptible to heat, humidity, and dust/dirt collection.

For example, see this close up photo of an open circuit on a 13-year-old 9390 printed circuit board. The trace opened due to over-current as a result of a compromised electronic component, switching the UPS to bypass where the critical load is unprotected.

The Eaton 9390 SLEP is for customers with 10+ year old 9390s who want to reset the clock

and get 10 more years of service life.

There are numerous benefits to this program, including:

Interested in this new program?

Learn more and contact Eaton at Eaton.com/UPSservices

Additional services included:• Cleaning of contactors and wiring

(replacement as necessary)• UPS system calibration, functional

testing and reporting• 1-year warranty (7x24, 8 hour

response, parts and labor)• PredictPulse Remote Monitoring

(1-year subscription)• 10-year minimum entitlement to

purchase full-service coverage

Optional services:• ESS Upgrade to 99% efficiency (as

applicable)• kVA Upgrade for additional capacity• Full onsite commissioning/load bank

testing services

Replaced during SLEP (electronics)Optionally replace at same time (consumables) Stays (replacement not necessary)

Color key:

Control board

Interface board

Power modules

Inside view of 9390 120–160 kVA UPS

Fans

Capacitors

Mini CSB

Powersupplies

Power supplies

Fans

Terminal blocks

Contactors

Static switch

Quick implementation / minimal downtime

(1 day)

No change to existing footprint

No electrical installation

Reuse existing accessories &

battery cabinets

Supports corporate sustainability

objectives

24hours

= >