Series MS2 Magnesense II Differential Pressure … Series MS2 Magnesense ® II Differential Pressure Transmitter with BACnet Communication Protocol combines the proven stable Hall

Bulletin P-MS2-B

The Series MS2 Magnesense® II Differential Pressure Transmitter withBACnet Communication Protocol combines the proven stable Hall Effectsensing technology of our original MS Series with additional features to reduceinstallation time and simplify ordering. When using the pluggable integral display,either Metric or English engineering units can be selected by changing the dipswitch position. A major benefit of the communications is the transmitters can bedaisy-chained together to reduce wiring time and installation cost. Thecommunications allow for the transmitter to integrate seamlessly into the existingbuilding automation control.

Like the original Series MS, the second generation transmitter can display pressureor velocity with the square root extraction internal to the transmitter. Additionalparameters have been included to expand the square root capability to include flowmeasurements.

INSTALLATION

Surface Mount:The transmitter should be mounted on a vertical surface with the connectionsdirected down to prevent moisture from entering either the pressure ports or theelectrical cable entry. The diaphragm must be vertical to minimize gravity effects onthe diaphragm. Attach the mounting flange to a flat surface using three #8 x 1/2˝pan head sheet metal screws. Do not over tighten.

Duct Mount:The transmitter should be mounted away from fans, corners, heating and coolingcoils and other equipment that will affect the measurement of the pressure.1. To mount the transmitter, drill a 9/16˝ (12.70 mm) diameter hole into the duct.2. Insert transmitter probe into the duct.3. Mark location of three mounting holes on duct using mounting flange as

template. Drill holes.4. Attach mounting flange to duct with three #8 x 1/2˝ pan head sheet metal

screws. Do not over tighten screws.

DWYeR INSTRUMeNTS, INC. Phone: 219/879-8000 www.dwyer-inst.com P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. fax: 219/872-9057 e-mail: [email protected]

SPeCIfICATIONSService: Air and non-combustible, compatible gases.Wetted Materials: Consult factory.Accuracy: ±1% FS for 0.25˝ (50 Pa), 0.5˝ (100 Pa), 2˝ (500 Pa), 5˝ (1250 Pa),10˝ (2 kPa), 15˝ (3 kPa), 25˝ (5 kPa); ±2% FS for 0.1˝ (25 Pa), 1˝ (250 Pa), andall bi-directional ranges.Stability: ±1% / year FSO.Temperature Limits: 0 to 150°F (-18 to 66°C).Pressure Limits: 1 psi max., operation; 10 psi burst.Power Requirements: 10 to 36 VDC or isolated 21.6 to 33 VAC.Output Signals: BACnet MS/TP communication protocol.Response Time: Averaging, adj 0 to 240 s.Zero & Span Adjustments: Digital push buttons.Current Consumption: 40 mA max.Display (optional): 5-digit LCD.electrical Connections: 5-wire terminal block, 22 to 28 AWG.electrical entry: 1/2˝ NPS thread; Accessory (A-151): Cable gland for 5 to 10mm diameter cable.Process Connection: 3/16˝ ID tubing (5 mm ID); Max. OD 9 mm.enclosure Rating: NEMA 4X (IP66).Mounting Orientation: Diaphragm in vertical position.Weight: 8.0 oz (230 g).Agency Approvals: CE.

Specifications - Installation and Operating Instructions

Series MS2 Magnesense® II Differential Pressure Transmitterwith BACnet Communication

3-1/2[88.90]

3-11/32[84.84]

2-11/64[55.12]

21/32[16.51]

21/32[16.51]

29/32[23.02]

57/64[22.60]

1/2[12.76]

1-41/64[41.71]

25/64[9.97]

2-41/64[67.24]

ø3-7/16[ø87.31] 1/2 NPT

ø3-7/16[ø87.31]

2-41/64[67.16]

21/32[16.55]

21/32[16.55] 29/32

[23.02]

57/64[22.67]

1/2[12.77]

1/2 NPT

[3] 3/16 [4.76] HOLESEQUALLY SPACED ON A

4.115 [104.52] B.C.

2-9/16[65.12]

2-11/64[55.25]

7-41/64[194.06]15/64[6.00]

Wall Mount Bracket

Duct Mount Bracket

DIN Mount Bracket

electrical Wiring

Figure 1 shows how to connect the MS2 in a network containing a common powersupply. Use a cable containing two twisted pairs. One pair is to be used for B(+)and A(-). The other pair is to be used for power and common. This configuration isnot suitable for AC supplies. Use a DC supply only. Care should be taken that thereare not too many devices powered from the same supply as voltage drops willoccur in the wiring. If you have many devices, or have long cable runs, the localsupply configuration may be a better choice.

Figure 2 shows how to connect the MS2 in a network containing individual localsupplies. Use a cable containing a twisted pair and a single conductor. The pair isto be used for B(+) and A(-). The single conductor is to be used for common. BothAC and DC supplies are suitable for this configuration.

In either configuration you must use shielded cable. The MS2 has a shield terminalfor a convenient location to make connections. It is not electrically connected to theMS2. Connect the shield to earth ground at one location only to prevent groundloops.

All devices in the network should be daisy chained. Star connections and Tconnections are not permitted.

The B(+) and A(-) lines must be terminated at both ends with a 120 ohm resistor.If the MS2 is an end device it has an on-board resistor that may be used. See DIPSWITCH SETTINGS to enable it.

The network must be biased properly. If needed, there are bias resistors on-boardthe MS2. No more than two sets of bias resistors should be enabled in the network.See DIP SWITCH SETTINGS to enable them.

Dip Switch Configurations

Use the left DIP Switch SW1 to configure the BACnet MS/TP MAC communicationprotocol address of the device. The LCD will show the address when thetransmitter is powered on. Valid addresses range from 1 to 127. By default, thedevice is shipped with the address 127 (as shown in Figure 3). A valid and unusedaddress should be set before connecting to an existing network. However, theaddress can be changed while the device is operational. If the address is changed,the device will stop responding to the currently configured address immediately.The device waits 15 seconds after the last switch change before applying the newaddress. The device will not function properly if an invalid address is set. The redLED will periodically blink once indicating an invalid address. The LCD will display“A Err” when the transmitter is powered on if the address is invalid. See AppendixI for setting the BACnet MS/TP MAC address of the device.

Use the right DIP Switch SW2 to configure other hardware and software options.

Table 1: DIP Switch SW2 functions

Table 2: Display Units Selection

Wiring should comply with Electrical Characteristics ofGenerators and Receivers for Use in Balanced Digital Multipoint

Systems, TIA/EIA-485-A-1998, Telecommunications Industry Association, 1998.

NOTICe

Wiring should comply with ANSI/ASHRAE Standard 135-2010BACnet A Data Communication Protocol for Building

Automation and Control Networks, American Society of Heating, Refrigerating andAir-Conditioning Engineers, Inc., 2010.

NOTICe

Communications wiring must be in a daisy-chain fashion. Starconnections are not permitted.

NOTICe

Cable shield must be connected to earth ground at one locationonly.

NOTICe

COMMON POWER SUPPLY

B(+) A(-) PWR COM SHIELD

TO NEXTDEVICE

TO PREVIOUSDEVICE

B(+)A(-)PWRCOM

B(+)A(-)

PWRCOM

figure 1

B(+) A(-) PWR COM SHIELD

POWERSUPPLY

LOCAL POWER SUPPLY

+ -

B(+)A(-)

COM

B(+)A(-)

COM

figure 2

ON

1 2 3 4 5 6 7 8

figure 3

figure 4

Switch1-2 – Display Units

Selection(See Table 2)

3-4 – Reserved5 - Reset BACnetConfiguration tofactory defaults6 - B(+) NetworkResister7 - A(-) NetworkResister8 - TerminatingResister

On

Reset settings at Power On

511Ω Pull-up to 5V

511Ω Pull-down to GND

120Ω between A(-) and B(+)

When using the on-board buttons, there is a 5 second delayfrom the time the zero or span calibration button is released until

the time that the change in calibration takes place. This delay is used to preventstress related offsets on the lower ranges.

NOTICe

The security level that is set in the Programming Menu Sectionof the manual will determine which calibrations, if any, may be

adjusted by the user through the on-board buttons, but the calibration can bechanged at any time through the communications.

NOTICe

Off

Settings Preserved

Pull-up not connected

Pull-down not connected

Open

Switch 1OFFONOFFON

Switch 2OFFOFFONON

UnitInches of Water Column (in WC)Pascal (Pa)Millimeters of Water Column (mm WC)Kilo-Pascal (kPa)

Zero CalibrationThe zero calibration can be set by applying zero pressure to both the pressure portsand pressing the zero button for 3 seconds. If the local LCD is present, the displaywill read Sero and then sequence back to the home display.

Span CalibrationThe span calibration can be adjusted only after setting the zero adjustment. It mustbe completed within 5 minutes of the last zero calibration. The span calibrationbutton will be ignored until the zero calibration is completed. Apply pressure to theport of the transmitter that is associated with the maximum end of the transmitterrange. Press and hold the span button for 3 seconds. If the local LCD is present,the display will read SPAn and then sequence back to the home display. If the spancalibration is attempted before adjusting the zero calibration, the FAIL error messagewill flash on the display.

LCD DisplayThe Magnesense® II Differential Pressure Transmitter can be ordered with anoptional, integral LCD. If the display is not needed for normal operation, thetransmitter can be ordered without the LCD. A Model A-MS2-LCD field upgradeabledisplay is available. It comes with a housing cover with the overlay cut out for thedisplay. The display will plug into the pins as shown in Figure 5.

Display error MessagesovEr = The applied pressure is greater than the maximum span value causing anOver Range Error.UndEr = The applied pressure is less than the minimum span value causing anUnder Range Error.FAiL = When the span or zero buttons are pressed, the pressure value is out of therange to allow a correct setting. This may be due to a sensor failure or incorrectpressure being applied.Err1 = The sensor is damaged.

PROGRAMMING MeNUS

Home MenuDuring normal operation, the display will be in the Home Menu and will display thecurrent measured pressure and the engineering units.

Menu Access SecurityWhile in the Home Menu, press and hold the Zero and Span buttonssimultaneously until SECUr appears on the display in order to access the otherprogramming menus. Upon releasing the buttons, the display will indicate thecurrent security level.

If the current security level is the security level desired (i.e. Security Level 0), pressand hold the span button for three seconds to enter the Pressure, Velocity, or AirFlow Menu.

If the security level is not the desired level, it can be changed temporarily to a lowersecurity level or permanently to a higher level of security by pressing the zerobutton. A security code will be shown on the display and it can be changed to oneof the codes listed in the below table. The span button chooses which digit and thezero button increments the value of that digit. Pressing and holding the span buttonwill store the value.

The level of access to the programming menus and the calibration is limited basedon the security level. The above table details the level of access for each securitylevel.

Programming Via BACnet MS/TP Communication Protocol

Supported BACnet Communication Protocol MS/TP Configurations

Auto-Baud Serial ConfigurationAuto-baud serial configuration enables the device to determine the baud ratedirectly from the serial traffic. This allows a device to be quickly and easily deployedafter a valid BACnet Communication Protocol MS/TP address is chosen.

To activate auto-baud serial configuration, set a valid BACnet CommunicationProtocol MS/TP address using the left DIP switch SW1, connect the serial bus andpower wires, and then apply power. The device will power up and begin examiningthe serial bus for communication. The Red LED will repeatedly flash twice,indicating that auto-baud serial configuration is in progress.

If the device is setup offline or away from the main network, it is necessary togenerate BACnet Communication Protocol MS/TP traffic in order to configure theserial communication. Initiating a WhoIs command is a good method to generateBACnet Communication Protocol MS/TP traffic and verify the device is workingproperly. Note that while serial configuration is in progress, the device may notrespond to requests. The device may require multiple requests to complete theserial configuration process.

The auto-baud serial configuration process will complete once a WhoIs orReadProperty command is successfully received and processed.

The auto-baud serial configuration procedure is started after a power-cycle andafter a change to the MS/TP address.

SecurityLevel0123

View MenuYesYesNoNo

Setting000111222333

edit MenuYesNoNoNo

SpanYesNoNoNo

ZeroYesYesYesNo

Access

Data Size8

SupportedBaud Rates960019200384005760076800115200

ParityNone

Stop Bits1

figure 5

DIP SwitchSW1 DIP Switch

SW2

LCD Pins LCD Pins

BACnet Communication Protocol Object OverviewThe device supports the following objects

Device Information

The default device object identifier is 607xxx, where xxx is replaced by the MS/TPMAC address set by the left DIP switch SW1. The object identifier value will changeas the MS/TP MAC address changes. However, if a specific object identifier iswritten via BACnet Communication Protocol, then that value is stored and changesto the MS/TP MAC address will no longer affect the object identifier. See AppendixII for the device object property table.

Accessing the Measurements

The analog input object AI1 through AI4 are for viewing the pressure measurementin the desired engineering units. The object property tables for these analog inputobjects can be found in Appendix III.

Analog value object AV1 through AV4 are for viewing the Air Velocity or Air Flowcalculated values in the desired engineering units. The object property tables forthe analog value objects can be found in Appendix IV.

Setting the K factor and Area

There is an additional analog object value (AV5) for setting the K factor used tocalculate the velocity and air flow. The present value would be the value of the Kfactor and can be set from 0 to 9.999.

For flow measurements, the area will also have to be set using analog value objectAV6. The present value would be the area in square feet. The area can be set from0.01 to 999.99 square feet.

The object property tables for the analog value objects can be found in AppendixIV.

From the factory, a K factor and the area are preset to be 1.000. Binary value object(BV1) must be set to 0 (INACTIVE) in order to use K factor/area value for actualvelocity/flow values with units. Otherwise, the device uses the default values tooutput range 0-1.0 based on the full scale of the instrument. The object propertytables for the binary value objects can be found in Appendix V.

Zero Calibration

Zero calibration can be done either with the push buttons or using BACnetcommunications. Both pressure ports should either be vented to atmosphericpressure or should have no pressure applied. When using BACnetcommunications, the binary value object (BV2) will be used to signal the transmitterto zero the reading. The present value of this object will be set to ACTIVE (1) toinitiate the re-calibration of the zero point of the sensor. The zero function will onlywork if the current pressure is within ±2% of the span pressure of the previous zero.If the current pressure is outside of this valid band, the zero function will fail and thepresent value will be changed to INACTIVE (0). The zero function takes at most 10seconds to complete. If after this time the present value remains ACTIVE (1), thenthe command was executed successfully. The object property tables for the binaryvalue objects can be found in Appendix V.

Span Calibration

In order to adjust the span calibration, apply pressure to the ports of the transmitterthat is associated with the maximum end of the transmitter range. The binary valueobject (BV3) will be used to signal the transmitter to adjust span. The present valuewill be set to ACTIVE (1) to initiate the span calibration. The span calibration canbe adjusted only after setting the zero adjustment. It must be completed within 5minutes of the last zero calibration. The span calibration command will fail until thezero calibration is completed and the present value will be returned to INACTIVE(0). The span function takes at most 10 seconds to complete. If after this time, thepresent value remains ACTIVE (1), then the command was executed successfully.The object property tables for the binary value objects can be found in Appendix V.

Reset factory Defaults

Present values for the zero, span, K factor, area, and Use Default K Factor can berestored to the factory settings using the binary value object (BV4). The presentvalue will be set to ACTIVE (1) to initiate the factory default procedure. The factorydefault takes at most 10 seconds to complete. If after this time, the present valueremains ACTIVE (1), then the command was executed successfully. The objectproperty tables for the binary value objects can be found in Appendix V.

BACnet Communication Protocol Services

Device Communication Control Service (DM-DCC-B)

This device supports the Device Communication Control Service BIBB. Theoptional time duration in minutes is also supported. This device is configured witha password that must be provided to successfully execute this command. Thepassword is “Dwyer”.

Reinitialize Device Service (DM-RD-B)

This device supports the Reinitialize Device Service BIBB. The supported devicestates are COLDSTART and WARMSTART. All other states return error. Thisdevice is configured with a password that must be provided to successfully executethis command. The password is “Dwyer”.

LeD Status

The device provides three LEDs to indicate status and activity. The LEDs arelocated to the right of the terminal block and are arranged from left to right as green,yellow, and red. The green LED indicates communication with the pressure sensor.This LED will flash very quickly most of the time, even without requests from theBACnet Communication Protocol interface. The yellow LED indicates BACnetCommunication Protocol MS/TP communication addressed to this specific device.The frequency and duration of this LED depends on the baud rate and size ofrequest sent. The red LED indicates error states by flashing specific error codesperiodically.

MAINTeNANCe/RePAIRUpon final installation of the Series MS2 Differential Pressure Transmitter, noroutine maintenance is required. The Series MS2 is not field serviceable and it isnot possible to repair the unit. Field repair should not be attempted and may voidwarranty.

WARRANTY/ReTURNRefer to “Terms and Conditions of Sales” in our catalog and on our website. Contactcustomer service to receive a Return Goods Authorization number before shippingthe product back for repair. Be sure to include a brief description of the problemplus any additional application notes.

DynamicallyCreatableNoNo

No

No

ObjectTypeDeviceAnalog Input

Analog Value

Binary Value

DynamicallyDeletableNoNo

No

No

ObjectIdentifier607xxxAl1Al2Al3Al4AV1AV2AV3AV4AV5AV6AV7BV1BV2BV3BV4

ObjectNameMS2 PressurePressure inWCPressure PascalsPressure Kilo-PascalsPressure mmWCVelocity FPMVelocity MPSFlow CFMFlow CMHVelocity K ValueFlow Area SqFtSensor PresentUse Default K ValueZeroSpanRestore FactoryPressure Values

Number of flashesSolid On (not flashing)12

3

error DescriptionInvalid Factory ConfigurationInvalid BACnet Communication Protocol MS/TP AddressAuto Baud Configuration in progress, unit may notrespond to requestsCommunication with pressure sensor failed

Changes to Max Master and Max Info frames require a powercycle/reset to take effect.

NOTICe

Appendix I: Setting BACnet Communication Protocol MS/TP MACAddress of Unit

The address assignment is determined by adding the values for each of theswitches that are in the ON position. The transmitter comes from the factory with allof the dip switches, except position 1, in the ON position as shown in Figure 6below. The address of the transmitter would be 127 as it would be64+32+16+8+4+2+1 = 127. Another example would be if the address desired was008, the only dip switch position in the ON position would be position 5 as shownin Figure 7 below.

Appendix II: Device Object Property Table

Switch PositionAddress Value

264

332

416

58

64

72

81

1128

ON

1 2 3 4 5 6 7 8

figure 6: Address of Transmitter is 127

ON

1 2 3 4 5 6 7

A

8

figure 7: Address of Transmitter is 008

Though the minimum possible address would be address 0when all the dip switch positions were set to OFF, and the

maximum possible address would be address 255 when all of the dip switches wereset to ON, the transmitter only has valid address from 1 to 127. Any address outsideof this range will give an error code.

NOTICe

PropertyObject IdentifierObject NameObject TypeSystem StatusVendor NameVendor IdentifierModel NameFirmwareRevisionApplicationSoftware VersionLocationDescriptionProtocol VersionProtocol RevisionProtocol ServicesSupportedProtocol ObjectTypes SupportedObject ListMaximum APDULength AcceptedSegmentationSupportedAPDU TimeoutNumber of APDURetriesMax MasterMax Info FramesDevice AddressBindingDatabaseRevision Serial Number(1000)Sensor Serial Number (1001)

DefaultValue607xxxMS2 PressureDEVICE(8)Operational(0)“Dwyer Instruments, Inc.”607“MS2”“X.X.X”

“X.X.X.X”

“Diff. Pressure Transmitter”112See PICS

See Table on page 4

See Table on page 4128

NO_SEGMENTATION (3)

00

1271Empty

0

Property DataTypeBACnetObjectIdentifierCharacterString(32)BACnetObjectTypeBACnetDeviceStatusCharacterStringUnsignedCharacterStringCharacterString

CharacterString

CharacterString(32)CharacterString(32)UnsignedUnsignedBACnetServicesSupportedBACnetObjectTypesSupportedBACnetArrayUnsigned

BACnetSegmentationUnsignedUnsigned

UnsignedUnsignedBACnetAddressBindingUnsigned

CharacterString

CharacterString

AccessRead/WriteRead/WriteReadReadReadReadReadRead

Read

Read/WriteRead/WriteReadReadRead

Read

ReadRead

Read

ReadRead

Read/WriteRead/WriteRead

Read

Read

Read

Appendix III: Analog Input Object Property Table

PropertyObject IdentifierObject NameObject TypePresent ValueStatus FlagsEvent StateReliabilityOut Of ServiceUnits

DefaultValueAI1Pressure inWCANALOG_INPUT (0)Current reading0NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)Inches-of-water (58)

Property DataTypeBACnetObjectIdentifierCharacterStringBACnetObjectTypeRealBACnetStatusFlagsBACnetEventStateBACnetReliabilityBooleanBACnetEngineeringUnits

AccessReadReadReadReadReadReadReadRead/WriteRead


DefaultValueAI2Pressure PascalsANALOG_INPUT (0)Current reading0NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)pascals (53)




DefaultValueAI3Pressure Kilo-PascalsANALOG_INPUT (0)Current reading0NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)kilopascals (54)




DefaultValueAI4Pressure mmWCANALOG_INPUT (0)Current reading0NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)Millimeters-of-water (206)



Analog Input (AI1): Pressure in inches of water column.

Analog Input (AI2): Pressure in Pascals.

Analog Input (AI3): Pressure in Kilo-Pascals.

Analog Input (AI4): Pressure in millimeters of water column.


DefaultValueAV6Flow Area SqFtANALOG_VALUE (2)10NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)Square-feet (1)


AccessReadReadReadRead/WriteReadReadReadRead/WriteRead


DefaultValueAV7Sensor PresentANALOG_VALUE (2)Model Specific0NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)No units (95)



Analog Value (AV6): Setting Area in Square Feet (0.01 to 999.99).

Analog Value (AV7): Detecting if the Sensor is Working properly.

The present value of this object represents the type of pressuresensor used in the specific model and can indicate if there is a

problem with the sensor. See Sensor Table for sensor types.

NOTICe

Present Value0123

SensorNo Sensor (Error)Hall Effect SensorPiezo SensorCapcell Sensor

Sensor Types for AV7.

Appendix IV: Analog Value Object Property Table


DefaultValueAV1Velocity FPMANALOG_VALUE (2)Current reading0NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)Feet-per-minute (77)




DefaultValueAV2Velocity MPSANALOG_VALUE (2)Current reading0NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)Meters-per-second (74)




DefaultValueAV3Flow CFMANALOG_VALUE (2)Current reading0NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)Cubic-feet-per-minute (84)




DefaultValueAV4Flow CMHANALOG_VALUE (2)Current reading0NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)Cubic-meters-per-hour (135)




DefaultValueAV5Velocity K ValueANALOG_VALUE (2)10NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)No units (95)


AccessReadReadReadRead/WriteReadReadReadRead/WriteRead

Analog Value (AV1): Velocity in Feet per Minute.

Analog Value (AV2): Velocity in Meters per Second.

Analog Value (AV3): Volumetric Flow in Cubic Feet per Minute.

Analog Value (AV4): Volumetric Flow in Cubic Meters per Hour.

Analog Value (AV5): Setting K Factor Range (0 to 9.999).

Appendix V: Binary Value Object Property Table

PropertyObject IdentifierObject NameObject TypePresent ValueStatus FlagsEvent StateReliabilityOut Of Service

DefaultValueBV1Use Default K ValueBINARY_VALUE (5)ACTIVE (1)0NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)

Property DataTypeBACnetObjectIdentifierCharacterStringBACnetObjectTypeBACnetBinaryPVBACnetStatusFlagsBACnetEventStateBACnetReliabilityBoolean

AccessReadReadReadRead/WriteReadReadReadRead/Write


DefaultValueBV2ZeroBINARY_VALUE (5)INACTIVE (0)0NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)




DefaultValueBV3SpanBINARY_VALUE (5)INACTIVE (0)0NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)



PropertyObject IdentifierObject Name

Object TypePresent ValueStatus FlagsEvent StateReliabilityOut Of Service

DefaultValueBV4Restore Factory PressureValuesBINARY_VALUE (5)INACTIVE (0)0NORMAL (0)NO_FAULT_DETECTED(0)FALSE (0)

Property DataTypeBACnetObjectIdentifierCharacterString

BACnetObjectTypeBACnetBinaryPVBACnetStatusFlagsBACnetEventStateBACnetReliabilityBoolean

AccessReadRead

ReadRead/WriteReadReadReadRead/Write

Binary Value (BV1): Use Default K Factor and Area.

Binary Value (BV2): Zero Calibration.

Binary Value (BV3): Span Calibration

Binary Value (BV4): Restore Factory Default Present Values.

ZEROZZEZERZERO

ZERO

ZERO

Z

ZERO

ZE

ZERO

ZER

ZERO

ZERO

ZERO

ZERO

ZERO

Z

ZERO

ZERO

ZE

ZERO

ZERO

ZER

ZERO

ZERO

ZERO

ZEROZZEZERZERO

ZEROZZEZERZERO

ZEROZZEZERZERO

ZEROZZEZERZERO

ZEROZZEZERZERO ZEROZZEZERZERO

ZEROZZEZERZERO

SPANSSPSPASPAN

SPANSSPSPASPAN

SPANSSPSPASPAN

SPANSSPSPASPAN

SPANSSPSPASPAN

SPANSSPSPASPANSPANSSPSPASPAN

SPANSSPSPASPAN

SPANSSPSPASPAN

SPANSSPSPASPAN SPANSSPSPASPANSPANSSPSPASPAN

SPAN

SPAN

S

SPAN

SP

SPAN

SPA

SPAN

SPAN

SPAN

SPAN

SPAN

S

SPAN

SPAN

SP

SPAN

SPAN

SPA

SPAN

SPAN

SPAN

ZEROZZEZERZERO

SPANSSPSPASPAN

ZEROZZEZERZERO

SPANSSPSPASPAN

ZEROZZEZERZERO

SPANSSPSPASPAN

ZEROZZEZERZERO

SPANSSPSPASPAN

BUTTONBBUBUTBUTTBUTTOBUTTON PRESSBUTTON PBUTTON PRBUTTON PREBUTTON PRESBUTTON PRESS LEGENDBUTTON PRESS LBUTTON PRESS LEBUTTON PRESS LEGBUTTON PRESS LEGEBUTTON PRESS LEGENBUTTON PRESS LEGEND= PRESSPPRPREPRESPRESS ZEROPRESS ZPRESS ZEPRESS ZERPRESS ZERO BUTTONPRESS ZERO BPRESS ZERO BUPRESS ZERO BUTPRESS ZERO BUTTPRESS ZERO BUTTOPRESS ZERO BUTTON= PRESSPPRPREPRESPRESS SPANPRESS SPRESS SPPRESS SPAPRESS SPAN BUTTONPRESS SPAN BPRESS SPAN BUPRESS SPAN BUTPRESS SPAN BUTTPRESS SPAN BUTTOPRESS SPAN BUTTON= PRESSPPRPREPRESPRESS ANDPRESS APRESS ANPRESS AND HOLDPRESS AND HPRESS AND HOPRESS AND HOLPRESS AND HOLD ZEROPRESS AND HOLD ZPRESS AND HOLD ZEPRESS AND HOLD ZERPRESS AND HOLD ZERO BUTTONPRESS AND HOLD ZERO BPRESS AND HOLD ZERO BUPRESS AND HOLD ZERO BUTPRESS AND HOLD ZERO BUTTPRESS AND HOLD ZERO BUTTOPRESS AND HOLD ZERO BUTTON= PRESSPPRPREPRESPRESS ANDPRESS APRESS ANPRESS AND HOLDPRESS AND HPRESS AND HOPRESS AND HOLPRESS AND HOLD SPANPRESS AND HOLD SPRESS AND HOLD SPPRESS AND HOLD SPAPRESS AND HOLD SPAN BUTTONPRESS AND HOLD SPAN BPRESS AND HOLD SPAN BUPRESS AND HOLD SPAN BUTPRESS AND HOLD SPAN BUTTPRESS AND HOLD SPAN BUTTOPRESS AND HOLD SPAN BUTTON

= PRESSPPRPREPRESPRESS ANDPRESS APRESS ANPRESS AND HOLDPRESS AND HPRESS AND HOPRESS AND HOLPRESS AND HOLD ZEROPRESS AND HOLD ZPRESS AND HOLD ZEPRESS AND HOLD ZERPRESS AND HOLD ZERO ANDPRESS AND HOLD ZERO APRESS AND HOLD ZERO ANPRESS AND HOLD ZERO AND SPANPRESS AND HOLD ZERO AND SPRESS AND HOLD ZERO AND SPPRESS AND HOLD ZERO AND SPAPRESS AND HOLD ZERO AND SPAN BUTTONSPRESS AND HOLD ZERO AND SPAN BPRESS AND HOLD ZERO AND SPAN BUPRESS AND HOLD ZERO AND SPAN BUTPRESS AND HOLD ZERO AND SPAN BUTTPRESS AND HOLD ZERO AND SPAN BUTTOPRESS AND HOLD ZERO AND SPAN BUTTONPRESS AND HOLD ZERO AND SPAN BUTTONS

MENU

PRESS AND HOLD ZERO AND SPAN BUTTONS

M


ME


MEN


MENU CONVENTIONS


MENU C


MENU CO


MENU CON


MENU CONV


MENU CONVE


MENU CONVEN


MENU CONVENT


MENU CONVENTI


MENU CONVENTIO


MENU CONVENTION


MENU CONVENTIONS

ENTEREENENTENTEENTER MENUENTER MENTER MEENTER MENENTER MENU DISPLAYENTER MENU DENTER MENU DIENTER MENU DISENTER MENU DISPENTER MENU DISPLENTER MENU DISPLAENTER MENU DISPLAY

IN

ENTER MENU DISPLA Y

I

ENTER MENU DISPLAY

IN HOME

ENTER MENU DISPLA Y

IN H

ENTER MENU DISPLA Y

IN HO

ENTER MENU DISPLA Y

IN HOM

ENTER MENU DISPLA Y

IN HOME POSITION:

ENTER MENU DISPLA Y

IN HOME P

ENTER MENU DISPLA Y

IN HOME PO

ENTER MENU DISPLA Y

IN HOME POS

ENTER MENU DISPLA Y

IN HOME POSI

ENTER MENU DISPLA Y

IN HOME POSIT

ENTER MENU DISPLA Y

IN HOME POSITI

ENTER MENU DISPLA Y

IN HOME POSITIO

ENTER MENU DISPLA Y

IN HOME POSITION

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE

ENTER MENU DISPLA Y

IN HOME POSITION:

C

ENTER MENU DISPLA Y

IN HOME POSITION:

CA

ENTER MENU DISPLA Y

IN HOME POSITION:

CAL

ENTER MENU DISPLA Y

IN HOME POSITION:

CALI

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIB

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBR

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRA

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRAT

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE U

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UN

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNI

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT T

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO ZERO

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO Z

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO ZE

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO ZER

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO ZERO PRESSURE.

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO ZERO P

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO ZERO PR

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO ZERO PRE

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO ZERO PRES

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO ZERO PRESS

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO ZERO PRESSU

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO ZERO PRESSUR

ENTER MENU DISPLA Y

IN HOME POSITION:

CALIBRATE UNIT TO ZERO PRESSURE

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE

ENTER MENU DISPLA Y

IN HOME POSITION:


C

ENTER MENU DISPLA Y

IN HOME POSITION:


CA

ENTER MENU DISPLA Y

IN HOME POSITION:


CAL

ENTER MENU DISPLA Y

IN HOME POSITION:


CALI

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIB

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBR

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRA

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRAT

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE U

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UN

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNI

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT T

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO SPAN

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO S

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO SP

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO SPA

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO SPAN PRESSURE.

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO SPAN P

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO SPAN PR

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO SPAN PRE

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO SPAN PRES

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO SPAN PRESS

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO SPAN PRESSU

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO SPAN PRESSUR

ENTER MENU DISPLA Y

IN HOME POSITION:


CALIBRATE UNIT TO SPAN PRESSURE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN

ENTER MENU DISPLA Y

IN HOME POSITION:



I

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU

ENTER MENU DISPLA Y

IN HOME POSITION:



IN M

ENTER MENU DISPLA Y

IN HOME POSITION:



IN ME

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MEN

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU D

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DI

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DIS

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISP

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPL

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLA

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

S

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQ

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQU

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUEN

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENC

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES T

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO N

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEX

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT M

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MA

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAI

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN M

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN ME

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MEN

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM,

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU I

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU IT

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, A

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AN

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND I

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A M

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A ME

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MEN

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU I

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU IT

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM I

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS C

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CH

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHA

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHAN

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANG

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED T

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEM

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMP

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPO

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPOR

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORA

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORAR

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARI

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARIL

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVES

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY S

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SA

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAV

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVES THE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVES T

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVES TH

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVES THE SELECTION

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVES THE S

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVES THE SE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVES THE SEL

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVES THE SELE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVES THE SELEC

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVES THE SELECT

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVES THE SELECTI

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:

SEQUENCES TO NEXT MAIN MENU ITEM, AND IF A MENU ITEM IS CHANGED TEMPORARILY SAVES THE SELECTIO

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


S

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQ

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQU

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUEN

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENC

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES T

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES TH

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THR

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THRO

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROU

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUG

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH S

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SU

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB M

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB ME

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MEN

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU S

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SEL

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELEC

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECT

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTI

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIO

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTION

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS O

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCREMENTS

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR I

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR IN

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INC

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCR

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCRE

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCREM

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCREME

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCREMEN

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCREMENT

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCREMENTS DIGITS

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCREMENTS D

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCREMENTS DI

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCREMENTS DIG

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCREMENTS DIGI

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCREMENTS DIGIT

ENTER MENU DISPLA Y

IN HOME POSITION:



IN MENU DISPLAY:


SEQUENCES THROUGH SUB MENU SELECTIONS OR INCREMENTS DIGITS

DISPLAYDDIDISDISPDISPLDISPLADISPLAY ISDISPLAY IDISPLAY IS NOTDISPLAY IS NDISPLAY IS NODISPLAY IS NOT NECESSARYDISPLAY IS NOT NDISPLAY IS NOT NEDISPLAY IS NOT NECDISPLAY IS NOT NECEDISPLAY IS NOT NECESDISPLAY IS NOT NECESSDISPLAY IS NOT NECESSADISPLAY IS NOT NECESSARDISPLAY IS NOT NECESSARY

SEQUENCE

DISPLAY IS NOT NECESSARY

S


SE


SEQ


SEQU


SEQUE


SEQUEN


SEQUENC


SEQUENCE TO


SEQUENCE T


SEQUENCE TO NEXT


SEQUENCE TO N


SEQUENCE TO NE


SEQUENCE TO NEX


SEQUENCE TO NEXT DIGIT.


SEQUENCE TO NEXT D


SEQUENCE TO NEXT DI


SEQUENCE TO NEXT DIG


SEQUENCE TO NEXT DIGI


SEQUENCE TO NEXT DIGIT


SEQUENCE TO NEXT DIGIT. ACTIVE


SEQUENCE TO NEXT DIGIT. A


SEQUENCE TO NEXT DIGIT. AC


SEQUENCE TO NEXT DIGIT. ACT


SEQUENCE TO NEXT DIGIT. ACTI


SEQUENCE TO NEXT DIGIT. ACTIV


SEQUENCE TO NEXT DIGIT. ACTIVE DIGIT


SEQUENCE TO NEXT DIGIT. ACTIVE D


SEQUENCE TO NEXT DIGIT. ACTIVE DI


SEQUENCE TO NEXT DIGIT. ACTIVE DIG


SEQUENCE TO NEXT DIGIT. ACTIVE DIGI


SEQUENCE TO NEXT DIGIT. ACTIVE DIGIT WILL


SEQUENCE TO NEXT DIGIT. ACTIVE DIGIT W


SEQUENCE TO NEXT DIGIT. ACTIVE DIGIT WI


SEQUENCE TO NEXT DIGIT. ACTIVE DIGIT WIL


SEQUENCE TO NEXT DIGIT. ACTIVE DIGIT WILL BLINK.


SEQUENCE TO NEXT DIGIT. ACTIVE DIGIT WILL B


SEQUENCE TO NEXT DIGIT. ACTIVE DIGIT WILL BL


SEQUENCE TO NEXT DIGIT. ACTIVE DIGIT WILL BLI


SEQUENCE TO NEXT DIGIT. ACTIVE DIGIT WILL BLIN


SEQUENCE TO NEXT DIGIT. ACTIVE DIGIT WILL BLINK


SEQUENCE TO NEXT DIGIT. ACTIVE DIGIT WILL BLINK.

0.000.0.0

0.0

0.0

0

0.0

0.

0.0

0.0

W

W

CC

C

C

C

in C

C

i C

C

in

in

C

C

in

i

C

C

in

in

SECUrSSESECSECUSECUr

SEC

SECUr

S

SECUr

SE

SECUr

SEC 0

SECUr

SEC 0

PrES

SECUr

SEC0

P

SECUr

SEC0

Pr

SECUr

SEC0

PrE

SECUr

SEC0

PrES uEL

SECUr

SEC0

PrES u

SECUr

SEC0

PrES uE

SECUr

SEC0

PrES uEL FLo

SECUr

SEC0

PrES uEL F

SECUr

SEC0

PrES uEL FL

SECUr

SEC0

PrES uEL FLo

S

SECUr

SEC0

PrES uEL FLo

S 345

SECUr

SEC0

PrES uEL FLo

S 3

SECUr

SEC0

PrES uEL FLo

S 34

SECUr

SEC0

PrES uEL FLo

S 345

3

SECUr

SEC0

PrES uEL FLo

S 34 5

3

LoCKLLoLoCLoCK

FACtFFAFACFACt

000000000A

000A VG

HOMEHHOHOMHOME POSITIONHOME PHOME POHOME POSHOME POSIHOME POSITHOME POSITIHOME POSITIOHOME POSITION

FACTORY

HOME POSITION

F

HOME POSITION

FA

HOME POSITION

FAC

HOME POSITION

FACT

HOME POSITION

FACTO

HOME POSITION

FACTOR

HOME POSITION

FACTORY SETTINGS

HOME POSITION

FACTORY S

HOME POSITION

FACTORY SE

HOME POSITION

FACTORY SET

HOME POSITION

FACTORY SETT

HOME POSITION

FACTORY SETTI

HOME POSITION

FACTORY SETTIN

HOME POSITION

FACTORY SETTING

HOME POSITION

FACTORY SETTINGSRESTORED,

HOME POSITION

FACTORY SETTINGSR

HOME POSITION

FACTORY SETTINGSRE

HOME POSITION

FACTORY SETTINGSRES

HOME POSITION

FACTORY SETTINGSREST

HOME POSITION

FACTORY SETTINGSRESTO

HOME POSITION

FACTORY SETTINGSRESTOR

HOME POSITION

FACTORY SETTINGSRESTORE

HOME POSITION

FACTORY SETTINGSRESTORED

HOME POSITION

FACTORY SETTINGSRESTORED, THEN

HOME POSITION

FACTORY SETTINGSRESTORED, T

HOME POSITION

FACTORY SETTINGSRESTORED, TH

HOME POSITION

FACTORY SETTINGSRESTORED, THE

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNS

HOME POSITION

FACTORY SETTINGSRESTORED, THEN R

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RE

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RET

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETU

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETUR

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURN

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNST

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO H

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HO

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOM

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME POSITION

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME P

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME PO

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME POS

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME POSI

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME POSIT

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME POSITI

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME POSITIO

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME POSITIONHOLD

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME POSITIONH

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME POSITIONHO

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME POSITIONHOL

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME POSITIONHOLD 7

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME POSITIONHOLD 7

SECONDS

HOME POSITION

FACTORY SETTINGSRESTORED, THEN RETURNSTO HOME POSITIONHOLD7

S

HOME POSITION


SE

HOME POSITION


SEC

HOME POSITION


SECO

HOME POSITION


SECON

HOME POSITION


SECOND

HOME POSITION


SECONDS

HOME

HOME POSITION


SECONDS

H

HOME POSITION


SECONDS

HO

HOME POSITION


SECONDS

HOM

HOME POSITION


SECONDS

HOME POSITION

HOME POSITION


SECONDS

HOME P

HOME POSITION


SECONDS

HOME PO

HOME POSITION


SECONDS

HOME POS

HOME POSITION


SECONDS

HOME POSI

HOME POSITION


SECONDS

HOME POSIT

HOME POSITION


SECONDS

HOME POSITI

HOME POSITION


SECONDS

HOME POSITIO

HOME POSITION


SECONDS

HOME POSITION

WHENWWHWHEWHEN BUTTONSWHEN BWHEN BUWHEN BUTWHEN BUTTWHEN BUTTOWHEN BUTTONWHEN BUTTONS AREWHEN BUTTONS AWHEN BUTTONS ARWHEN BUTTONS ARERELEASEDWHEN BUTTONS ARERWHEN BUTTONS AREREWHEN BUTTONS ARERELWHEN BUTTONS ARERELEWHEN BUTTONS ARERELEAWHEN BUTTONS ARERELEASWHEN BUTTONS ARERELEASEWHEN BUTTONS ARERELEASED DISPLAYSWHEN BUTTONS ARERELEASED DWHEN BUTTONS ARERELEASED DIWHEN BUTTONS ARERELEASED DISWHEN BUTTONS ARERELEASED DISPWHEN BUTTONS ARERELEASED DISPLWHEN BUTTONS ARERELEASED DISPLAWHEN BUTTONS ARERELEASED DISPLAYWHEN BUTTONS ARERELEASED DISPLAYS CURRENTWHEN BUTTONS ARERELEASED DISPLAYS CWHEN BUTTONS ARERELEASED DISPLAYS CUWHEN BUTTONS ARERELEASED DISPLAYS CURWHEN BUTTONS ARERELEASED DISPLAYS CURRWHEN BUTTONS ARERELEASED DISPLAYS CURREWHEN BUTTONS ARERELEASED DISPLAYS CURRENWHEN BUTTONS ARERELEASED DISPLAYS CURRENTSECURITY

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTS

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTSE

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTSEC

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTSECU

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTSECUR

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTSECURI

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTSECURIT

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTSECURITY LEVEL

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTSECURITY L

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTSECURITY LE

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTSECURITY LEV

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTSECURITY LEVE

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTSECURITY LEVEL

WHILE

WHEN BUTTONS ARERELEASED DISPLAYS CURRENTSECURITY LEVE L

W


WH


WHI


WHIL


WHILE BUTTONS


WHILE B


WHILE BU


WHILE BUT


WHILE BUTT


WHILE BUTTO


WHILE BUTTON


WHILE BUTTONS ARE


WHILE BUTTONS A


WHILE BUTTONS AR


WHILE BUTTONS AREPRESSED


WHILE BUTTONS AREP


WHILE BUTTONS AREPR


WHILE BUTTONS AREPRE


WHILE BUTTONS AREPRES


WHILE BUTTONS AREPRESS


WHILE BUTTONS AREPRESSE


WHILE BUTTONS AREPRESSED

TOTTO CHANGETO CTO CHTO CHATO CHANTO CHANGTO CHANGESECURITYTO CHANG ESTO CHANGESETO CHANG ESECTO CHANG ESECUTO CHANG ESECURTO CHANG ESECURITO CHANG ESECURITTO CHANG ESECURITY LEVELTO CHANG ESECURITY LTO CHANG ESECURITY LETO CHANG ESECURITY LEVTO CHANG ESECURITY LEVETO CHANG ESECURITY LEVEL

= BLINKINGBBLBLIBLINBLINKBLINKIBLINKINBLINKING DIGITBLINKING DBLINKING DIBLINKING DIGBLINKING DIGIBLINKING DIGIT

SECURITYSSESECSECUSECURSECURISECURITSECURITY LEVELSECURITY LSECURITY LESECURITY LEVSECURITY LEVESECURITY LEVEL SETTINGSECURITY LEVEL SSECURITY LEVEL SESECURITY LEVEL SETSECURITY LEVEL SETTSECURITY LEVEL SETTISECURITY LEVEL SETTINSECURITY LEVEL SETTING0

SECURITY LEVEL SETTING01




000000000111000100011000111222

0001112

00011122

000111222333

0001112223

00011122233

000111222333

IFIIF SECURITYIF SIF SEIF SECIF SECUIF SECURIF SECURIIF SECURITIF SECURITY ISIF SECURITY IIF SECURITY IS SETIF SECURITY IS SIF SECURITY IS SEIF SECURITY IS SET TOIF SECURITY IS SET TIF SECURITY IS SET TO0,1,IF SECURITY IS SET TO0IF SECURITY IS SET TO0,IF SECURITY IS SET TO0,1IF SECURITY IS SET TO0,1, ORIF SECURITY IS SET TO0,1, OIF SECURITY IS SET TO0,1, OR 2IF SECURITY IS SET TO0,1, OR 2 IFIF SECURITY IS SET TO0,1, OR 2 IIF SECURITY IS SET TO0,1, OR 2 IF SECURITYIF SECURITY IS SET TO0,1, OR 2 IF SIF SECURITY IS SET TO0,1, OR 2 IF SEIF SECURITY IS SET TO0,1, OR 2 IF SECIF SECURITY IS SET TO0,1, OR 2 IF SECUIF SECURITY IS SET TO0,1, OR 2 IF SECURIF SECURITY IS SET TO0,1, OR 2 IF SECURIIF SECURITY IS SET TO0,1, OR 2 IF SECURITIF SECURITY IS SET TO0,1, OR 2 IF SECURITY ISIF SECURITY IS SET TO0,1, OR 2 IF SECURITY IIF SECURITY IS SET TO0,1, OR 2 IF SECURITY IS SETIF SECURITY IS SET TO0,1, OR 2 IF SECURITY IS SIF SECURITY IS SET TO0,1, OR 2 IF SECURITY IS SEIF SECURITY IS SET TO0,1, OR 2 IF SECURITY IS SET TOIF SECURITY IS SET TO0,1, OR 2 IF SECURITY IS SET TIF SECURITY IS SET TO0,1, OR 2 IF SECURITY IS SET TO 3IF SECURITY IS SET TO0,1, OR 2 IF SECURITY IS SET TO 3

PRESS

IF SECURITY IS SET TO0,1, OR 2 IF SECURITY IS SET TO3

P


PR


PRE


PRES


PRESS ANY


PRESS A


PRESS AN


PRESS ANY KEY


PRESS ANY K


PRESS ANY KE


PRESS ANY KEYOR


PRESS ANY KEYO


PRESS ANY KEYOR WAIT


PRESS ANY KEYOR W


PRESS ANY KEYOR WA


PRESS ANY KEYOR WAI


PRESS ANY KEYOR WAIT 5


PRESS ANY KEYOR WAIT 5 SECONDS


PRESS ANY KEYOR WAIT 5 S


PRESS ANY KEYOR WAIT 5 SE


PRESS ANY KEYOR WAIT 5 SEC


PRESS ANY KEYOR WAIT 5 SECO


PRESS ANY KEYOR WAIT 5 SECON


PRESS ANY KEYOR WAIT 5 SECOND


PRESS ANY KEYOR WAIT 5 SECONDS

SECURITYSSESECSECUSECURSECURISECURITSECURITY LEVELSECURITY LSECURITY LESECURITY LEVSECURITY LEVESECURITY LEVELSELECTIONSECURITY LEVELSSECURITY LEVELSESECURITY LEVELSELSECURITY LEVELSELESECURITY LEVELSELECSECURITY LEVELSELECTSECURITY LEVELSELECTISECURITY LEVELSELECTIOSECURITY LEVELSELECTION

MODE

SECURITY LEVELSELECTION

M


MO


MOD


MODE SELECTION


MODE S


MODE SE


MODE SEL


MODE SELE


MODE SELEC


MODE SELECT


MODE SELECTI


MODE SELECTIO


MODE SELECTIONPRESSURE,


MODE SELECTIONP


MODE SELECTIONPR


MODE SELECTIONPRE


MODE SELECTIONPRES


MODE SELECTIONPRESS


MODE SELECTIONPRESSU


MODE SELECTIONPRESSUR


MODE SELECTIONPRESSURE


MODE SELECTIONPRESSURE, VELOCITY,


MODE SELECTIONPRESSURE, V


MODE SELECTIONPRESSURE, VE


MODE SELECTIONPRESSURE, VEL


MODE SELECTIONPRESSURE, VELO


MODE SELECTIONPRESSURE, VELOC


MODE SELECTIONPRESSURE, VELOCI


MODE SELECTIONPRESSURE, VELOCIT


MODE SELECTIONPRESSURE, VELOCITY


MODE SELECTIONPRESSURE, VELOCITY,OR


MODE SELECTIONPRESSURE, VELOCITY,O


MODE SELECTIONPRESSURE, VELOCITY,OR FLOW


MODE SELECTIONPRESSURE, VELOCITY,OR F


MODE SELECTIONPRESSURE, VELOCITY,OR FL


MODE SELECTIONPRESSURE, VELOCITY,OR FLO



ADJUST



A



AD



ADJ



ADJU



ADJUS



ADJUST AVERAGING



ADJUST A



ADJUST AV



ADJUST AVE



ADJUST AVER



ADJUST AVERA



ADJUST AVERAG



ADJUST AVERAGI



ADJUST AVERAGIN



ADJUST AVERAGING

TO



ADJUST AVERAGING

T



ADJUST AVERAGING

TO SELECT



ADJUST AVERAGING

TO S



ADJUST AVERAGING

TO SE



ADJUST AVERAGING

TO SEL



ADJUST AVERAGING

TO SELE



ADJUST AVERAGING

TO SELEC



ADJUST AVERAGING

TO SELECT MODE



ADJUST AVERAGING

TO SELECT M



ADJUST AVERAGING

TO SELECT MO



ADJUST AVERAGING

TO SELECT MOD



ADJUST AVERAGING

TO SELECT MODE

INCREMENTIININCINCRINCREINCREMINCREMEINCREMENINCREMENTDIGITINCREMENTDINCREMENTDIINCREMENTDIGINCREMENTDIGIINCREMENTDIGIT

INCREMENT

INCREMENTDIGIT

I

INCREMENTDIGIT

IN

INCREMENTDIGIT

INC

INCREMENTDIGIT

INCR

INCREMENTDIGIT

INCRE

INCREMENTDIGIT

INCREM

INCREMENTDIGIT

INCREME

INCREMENTDIGIT

INCREMEN

INCREMENTDIGIT

INCREMENTDIGIT

INCREMENTDIGIT

INCREMENTD

INCREMENTDIGIT

INCREMENTDI

INCREMENTDIGIT

INCREMENTDIG

INCREMENTDIGIT

INCREMENTDIGI

INCREMENTDIGIT

INCREMENTDIGIT

SELECT

INCREMENTDIGIT

INCREMENTDIGIT

S

INCREMENTDIGIT

INCREMENTDIGIT

SE

INCREMENTDIGIT

INCREMENTDIGIT

SEL

INCREMENTDIGIT

INCREMENTDIGIT

SELE

INCREMENTDIGIT

INCREMENTDIGIT

SELEC

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

INCREMENTDIGIT

INCREMENTDIGIT

SELECTD

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDI

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIG

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGI

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECT

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

S

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SE

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SEL

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELE

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELEC

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDIGIT

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTD

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDI

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDIG

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDIGI

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDIGIT

TOTTO " PRESSURE,PPRPREPRESPRESSPRESSUPRESSURPRESSUREPRESSURE, VELOCITY,PRESSURE, VPRESSURE, VEPRESSURE, VELPRESSURE, VELOPRESSURE, VELOCPRESSURE, VELOCIPRESSURE, VELOCITPRESSURE, VELOCITYPRESSURE, VELOCITY, ORPRESSURE, VELOCITY, OPRESSURE, VELOCITY, OR FLOWPRESSURE, VELOCITY, OR FPRESSURE, VELOCITY, OR FLPRESSURE, VELOCITY, OR FLOPRESSURE, VELOCITY, OR FLOW " MENUSMMEMENMENUMENUS

Appendix VI: Menu flow Chart

uoHuuouoH

SPAN

SPANSSPSPASPAN


SPANSSPSPASPAN

SPAN

SPANSSPSPASPAN

SPANSSPSPASPAN

FROM

SPAN

F

SPAN

FR

SPAN

FRO

SPAN

FROM AVERAGING

SPAN

FROM A

SPAN

FROM AV

SPAN

FROM AVE

SPAN

FROM AVER

SPAN

FROM AVERA

SPAN

FROM AVERAG

SPAN

FROM AVERAGI

SPAN

FROM AVERAGIN

SPAN

FROM AVERAGING MENU

SPAN

FROM AVERAGING M

SPAN

FROM AVERAGING ME

SPAN

FROM AVERAGING MEN

SPAN

FROM AVERAGING MENU

VELOCITYVVEVELVELOVELOCVELOCIVELOCITVELOCITY MODEVELOCITY MVELOCITY MOVELOCITY MODVELOCITY MODE MENUVELOCITY MODE MVELOCITY MODE MEVELOCITY MODE MENVELOCITY MODE MENU

ADJUSTAADADJADJUADJUSADJUST VELOCITYADJUST VADJUST VEADJUST VELADJUST VELOADJUST VELOCADJUST VELOCIADJUST VELOCITADJUST VELOCITYOUTPUTADJUST VELOCITYOADJUST VELOCITYOUADJUST VELOCITYOUTADJUST VELOCITYOUTPADJUST VELOCITYOUTPUADJUST VELOCITYOUTPUT HIGHADJUST VELOCITYOUTPUT HADJUST VELOCITYOUTPUT HIADJUST VELOCITYOUTPUT HIGADJUST VELOCITYOUTPUT HIGH

UPONADJUST VELOCITYOUTPUT HIGH

UADJUST VELOCITYOUTPUT HIGH

UPADJUST VELOCITYOUTPUT HIGH

UPOADJUST VELOCITYOUTPUT HIGH

UPON RELEASEADJUST VELOCITYOUTPUT HIGH

UPON RADJUST VELOCITYOUTPUT HIGH

UPON READJUST VELOCITYOUTPUT HIGH

UPON RELADJUST VELOCITYOUTPUT HIGH

UPON RELEADJUST VELOCITYOUTPUT HIGH

UPON RELEAADJUST VELOCITYOUTPUT HIGH

UPON RELEASADJUST VELOCITYOUTPUT HIGH

UPON RELEASE

UPON

ADJUST VELOCITYOUTPUT HIGH

UPON RELEASE

U


UPON RELEASE

UP


UPON RELEASE

UPO


UPON RELEASE

UPON RELEASE


UPON RELEASE

UPON R


UPON RELEASE

UPON RE


UPON RELEASE

UPON REL


UPON RELEASE

UPON RELE


UPON RELEASE

UPON RELEA


UPON RELEASE

UPON RELEAS


UPON RELEASE

UPON RELEASE

UPON


UPON RELEASE

UPON RELEASE

U


UPON RELEASE

UPON RELEASE

UP


UPON RELEASE

UPON RELEASE

UPO


UPON RELEASE

UPON RELEASE

UPON RELEASE


UPON RELEASE

UPON RELEASE

UPON R


UPON RELEASE

UPON RELEASE

UPON RE


UPON RELEASE

UPON RELEASE

UPON REL


UPON RELEASE

UPON RELEASE

UPON RELE


UPON RELEASE

UPON RELEASE

UPON RELEA


UPON RELEASE

UPON RELEASE

UPON RELEAS


UPON RELEASE

UPON RELEASE

UPON RELEASE

ZERO


UPON RELEASE

UPON RELEASE

UPON RELEASE

Z


UPON RELEASE

UPON RELEASE

UPON RELEASE

ZE


UPON RELEASE

UPON RELEASE

UPON RELEASE

ZER


UPON RELEASE

UPON RELEASE

UPON RELEASE

ZERO

ZEROZZEZERZERO

ZEROZZEZERZERO

ZEROZZEZERZERO

SPANSSPSPASPAN

SPANSSPSPASPAN


INCREMENT

INCREMENTDIGIT

I

INCREMENTDIGIT

IN

INCREMENTDIGIT

INC

INCREMENTDIGIT

INCR

INCREMENTDIGIT

INCRE

INCREMENTDIGIT

INCREM

INCREMENTDIGIT

INCREME

INCREMENTDIGIT

INCREMEN

INCREMENTDIGIT

INCREMENTDIGIT

INCREMENTDIGIT

INCREMENTD

INCREMENTDIGIT

INCREMENTDI

INCREMENTDIGIT

INCREMENTDIG

INCREMENTDIGIT

INCREMENTDIGI

INCREMENTDIGIT

INCREMENTDIGIT

SELECT

INCREMENTDIGIT

INCREMENTDIGIT

S

INCREMENTDIGIT

INCREMENTDIGIT

SE

INCREMENTDIGIT

INCREMENTDIGIT

SEL

INCREMENTDIGIT

INCREMENTDIGIT

SELE

INCREMENTDIGIT

INCREMENTDIGIT

SELEC

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

INCREMENTDIGIT

INCREMENTDIGIT

SELECTD

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDI

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIG

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGI

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECT

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

S

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SE

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SEL

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELE

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELEC

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDIGIT

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTD

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDI

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDIG

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDIGI

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDIGIT

TOTTO "TO " UPDATETO " UTO " UPTO " UPDTO " UPDATO " UPDATTO " UPDATE SECURITYTO " UPDATE STO " UPDATE SETO " UPDATE SECTO " UPDATE SECUTO " UPDATE SECURTO " UPDATE SECURITO " UPDATE SECURITTO " UPDATE SECURITYANDTO " UPDATE SECURITYATO " UPDATE SECURITYANTO " UPDATE SECURITYAND SAVETO " UPDATE SECURITYAND STO " UPDATE SECURITYAND SATO " UPDATE SECURITYAND SAVTO " UPDATE SECURITYAND SAVE " MENUMMEMENMENU

02330020230233

0233

0233

0

0233

02

0233

023

0233

0233

o

0233

0233

o AdJ

0233

0233

o A

0233

0233

o Ad

0233

0233

o AdJ AdJ

0233

0233

o AdJ A

0233

0233

o AdJ Ad

0233

0233

o AdJ AdJ AdJ

0233

0233

o AdJ AdJ A

0233

0233

o AdJ AdJ Ad

0233

0233

o AdJ AdJ AdJu

0233

0233

o AdJ AdJ AdJu P

0233

0233

o AdJ AdJ AdJu P

diSP

0233

0233

o AdJ AdJ AdJu P

d

0233

0233

o AdJ AdJ AdJu P

di

0233

0233

o AdJ AdJ AdJu P

diS

0233

0233

o AdJ AdJ AdJu P

diSP d1000

0233

0233

o AdJ AdJ AdJu P

diSP d

0233

0233

o AdJ AdJ AdJu P

diSP d1

0233

0233

o AdJ AdJ AdJu P

diSP d10

0233

0233

o AdJ AdJ AdJu P

diSP d100

0233

0233

o AdJ AdJ AdJu P

diSP d1000

Unit

0233

0233

o AdJ AdJ AdJu P

diSP d1000

U

0233

0233

o AdJ AdJ AdJu P

diSP d1000

Un

0233

0233

o AdJ AdJ AdJu P

diSP d1000

Uni

0233

0233

o AdJ AdJ AdJu P

diSP d1000

Unit Unit

0233

0233

o AdJ AdJ AdJu P

diSP d1000

Unit U

0233

0233

o AdJ AdJ AdJu P

diSP d1000

Unit Un

0233

0233

o AdJ AdJ AdJu P

diSP d1000

Unit Uni

0233

0233

o AdJ AdJ AdJu P

diSP d1000

Unit Unit

FP

FP

MM

M

M

M

M

M

K

S

SSELECTEDSSESELSELESELECSELECTSELECTESELECTED UNITSSELECTED USELECTED UNSELECTED UNISELECTED UNITSELECTED UNITSDISPLAYEDSELECTED UNIT SDSELECTED UNITSDISELECTED UNIT SDISSELECTED UNIT SDISPSELECTED UNIT SDISPLSELECTED UNIT SDISPLASELECTED UNIT SDISPLAYSELECTED UNIT SDISPLAYESELECTED UNIT SDISPLAYED OR UNITSUUNUNIUNITUNITS SELECTEDUNITS SUNITS SEUNITS SELUNITS SELEUNITS SELECUNITS SELECTUNITS SELECTEUNITS SELECTED

BYUNITS SELECTEDBUNITS SELECTEDBY DIPUNITS SELECTEDBY DUNITS SELECTEDBY DIUNITS SELECTEDBY DIP SWITCHUNITS SELECTEDBY DIP SUNITS SELECTEDBY DIP SWUNITS SELECTEDBY DIP SWIUNITS SELECTEDBY DIP SWITUNITS SELECTEDBY DIP SWITCUNITS SELECTEDBY DIP SWITCHSETTING

UNITS SELECTEDBY DIP SWITCHS

UNITS SELECTEDBY DIP SWITCHSE

UNITS SELECTEDBY DIP SWITCHSET

UNITS SELECTEDBY DIP SWITCHSETT

UNITS SELECTEDBY DIP SWITCHSETTI

UNITS SELECTEDBY DIP SWITCHSETTIN

UNITS SELECTEDBY DIP SWITCHSETTING

ADJUSTAADADJADJUADJUSADJUST DISPLAYADJUST DADJUST DIADJUST DISADJUST DISPADJUST DISPLADJUST DISPLAADJUST DISPLAYKADJUST DISPLAYK FACTORADJUST DISPLAYK FADJUST DISPLAYK FAADJUST DISPLAYK FACADJUST DISPLAYK FACTADJUST DISPLAYK FACTOADJUST DISPLAYK FACTOR

SELECTSSESELSELESELECSELECT MAXIMUMSELECT MSELECT MASELECT MAXSELECT MAXISELECT MAXIMSELECT MAXIMUSELECT MAXIMUM OUTPUTSETSSESET BY PRESSUREPPRPREPRESPRESSPRESSUPRESSURPRESSURE ORPRESSURE OPRESSURE ORVELOCITY

PRESSURE ORV

PRESSURE ORVE

PRESSURE ORVEL

PRESSURE ORVELO

PRESSURE ORVELOC

PRESSURE ORVELOCI

PRESSURE ORVELOCIT

PRESSURE ORVELOCITY

FPMFFPFPM ORFPM OFPM OR M/SFPM OR MFPM OR M/FPM OR M/S BASEDFPM OR M/S BFPM OR M/S BAFPM OR M/S BASFPM OR M/S BASEFPM OR M/S BASEDONFPM OR M/S BASEDOFPM OR M/S BASEDON DIPFPM OR M/S BASEDON DFPM OR M/S BASEDON DIFPM OR M/S BASEDON DIP SWITCHFPM OR M/S BASEDON DIP SFPM OR M/S BASEDON DIP SWFPM OR M/S BASEDON DIP SWIFPM OR M/S BASEDON DIP SWITFPM OR M/S BASEDON DIP SWITCFPM OR M/S BASEDON DIP SWITCH SETTINGFPM OR M/S BASEDON DIP SWITCH SFPM OR M/S BASEDON DIP SWITCH SEFPM OR M/S BASEDON DIP SWITCH SETFPM OR M/S BASEDON DIP SWITCH SETTFPM OR M/S BASEDON DIP SWITCH SETTIFPM OR M/S BASEDON DIP SWITCH SETTINFPM OR M/S BASEDON DIP SWITCH SETTING

TOTTO PoHTO PTO PoTO PoH , PRESSUREPPRPREPRESPRESSPRESSUPRESSURPRESSUREMODE

PRESSUREM

PRESSUREMO

PRESSUREMOD

PRESSUREMODE MENU

PRESSUREMODE M

PRESSUREMODE ME

PRESSUREMODE MEN

PRESSUREMODE MENU

K

K

K

PoHPPoPoH

PoH

PoH

P

PoH

Po

PoH

PoH n

PoH

PoH n PoH

PoH

PoH n P

PoH

PoH n Po

PoH

PoH n PoH Y

PoH

PoH n PoH Y

SPANSSPSPASPAN

SPANSSPSPASPAN

SPAN SPANSSPSPASPAN

FROM

SPAN

F

SPAN

FR

SPAN

FRO

SPAN

FROM AVERAGING

SPAN

FROM A

SPAN

FROM AV

SPAN

FROM AVE

SPAN

FROM AVER

SPAN

FROM AVERA

SPAN

FROM AVERAG

SPAN

FROM AVERAGI

SPAN

FROM AVERAGIN

SPAN

FROM AVERAGING MENU

SPAN

FROM AVERAGING M

SPAN

FROM AVERAGING ME

SPAN

FROM AVERAGING MEN

SPAN

FROM AVERAGING MENU

PRESSUREPPRPREPRESPRESSPRESSUPRESSURPRESSURE MODEPRESSURE MPRESSURE MOPRESSURE MODPRESSURE MODE MENUPRESSURE MODE MPRESSURE MODE MEPRESSURE MODE MENPRESSURE MODE MENU

ADJUSTAADADJADJUADJUSADJUST PRESSUREADJUST PADJUST PRADJUST PREADJUST PRESADJUST PRESSADJUST PRESSUADJUST PRESSURADJUST PRESSUREOUTPUTADJUST PRESSUREOADJUST PRESSUREOUADJUST PRESSUREOUTADJUST PRESSUREOUTPADJUST PRESSUREOUTPUADJUST PRESSUREOUTPUT HIGHADJUST PRESSUREOUTPUT HADJUST PRESSUREOUTPUT HIADJUST PRESSUREOUTPUT HIGADJUST PRESSUREOUTPUT HIGH

UPON

ADJUST PRESSUREOUTPUT HIGH

U


UP


UPO


UPON RELEASE


UPON R


UPON RE


UPON REL


UPON RELE


UPON RELEA


UPON RELEAS


UPON RELEASE

SET


UPON RELEASE

S


UPON RELEASE

SE


UPON RELEASE

SET PoH


UPON RELEASE

SET P


UPON RELEASE

SET Po


UPON RELEASE

SET PoH TO


UPON RELEASE

SET PoH T


UPON RELEASE

SET PoH TO DESIRED


UPON RELEASE

SET PoH TO D


UPON RELEASE

SET PoH TO DE


UPON RELEASE

SET PoH TO DES


UPON RELEASE

SET PoH TO DESI


UPON RELEASE

SET PoH TO DESIR


UPON RELEASE

SET PoH TO DESIRE


UPON RELEASE

SET PoH TO DESIRED VALUE


UPON RELEASE

SET PoH TO DESIRED V


UPON RELEASE

SET PoH TO DESIRED VA


UPON RELEASE

SET PoH TO DESIRED VAL


UPON RELEASE

SET PoH TO DESIRED VALU


UPON RELEASE


PoH


UPON RELEASE


P


UPON RELEASE


Po


UPON RELEASE


PoH = DIPDDIDIP SWITCHDIP SDIP SWDIP SWIDIP SWITDIP SWITCDIP SWITCH FULLDIP SWITCH FDIP SWITCH FUDIP SWITCH FULDIP SWITCH FULL SCALEDIP SWITCH FULL SDIP SWITCH FULL SCDIP SWITCH FULL SCADIP SWITCH FULL SCALDIP SWITCH FULL SCALE SETTINGDIP SWITCH FULL SCALE SDIP SWITCH FULL SCALE SEDIP SWITCH FULL SCALE SETDIP SWITCH FULL SCALE SETTDIP SWITCH FULL SCALE SETTIDIP SWITCH FULL SCALE SETTINDIP SWITCH FULL SCALE SETTING

288228288WWCWCin

ZEROZZEZERZERO

SPANINCREMENTIININCINCRINCREINCREMINCREMEINCREMENINCREMENTDIGITINCREMENTDINCREMENTDIINCREMENTDIGINCREMENTDIGIINCREMENTDIGIT

SELECT

INCREMENTDIGIT

S

INCREMENTDIGIT

SE

INCREMENTDIGIT

SEL

INCREMENTDIGIT

SELE

INCREMENTDIGIT

SELEC

INCREMENTDIGIT

SELECTDIGIT

INCREMENTDIGIT

SELECTD

INCREMENTDIGIT

SELECTDI

INCREMENTDIGIT

SELECTDIG

INCREMENTDIGIT

SELECTDIGI

INCREMENTDIGIT

SELECTDIGIT

UNITS

INCREMENTDIGIT

SELECTDIGIT

U

INCREMENTDIGIT

SELECTDIGIT

UN

INCREMENTDIGIT

SELECTDIGIT

UNI

INCREMENTDIGIT

SELECTDIGIT

UNIT

INCREMENTDIGIT

SELECTDIGIT

UNITS SET

INCREMENTDIGIT

SELECTDIGIT

UNITS S

INCREMENTDIGIT

SELECTDIGIT

UNITS SE

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY

INCREMENTDIGIT

SELECTDIGIT

UNITS SET B

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY D

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DI

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWITCH

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP S

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SW

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWI

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWIT

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWITC

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWITCHWILL

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWITCHW

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWITCHWI

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWITCHWIL

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWITCHWILL BLINK

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWITCHWILL B

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWITCHWILL BL

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWITCHWILL BLI

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWITCHWILL BLIN

INCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWITCHWILL BLINK

THISINCREMENTDIGIT

SELECTDIGIT

UNITS SET BY DIP SWITCHWILL BLIN K

TINCREMENTDIGIT

SELECTDIGIT


THINCREMENTDIGIT

SELECTDIGIT


THIINCREMENTDIGIT

SELECTDIGIT


THIS MENUINCREMENTDIGIT

SELECTDIGIT


THIS MINCREMENTDIGIT

SELECTDIGIT


THIS MEINCREMENTDIGIT

SELECTDIGIT


THIS MENINCREMENTDIGIT

SELECTDIGIT


THIS MENU DEPENDS ONOONDIP

OND

ONDI

ONDIP SWITCH

ONDIP S

ONDIP SW

ONDIP SWI

ONDIP SWIT

ONDIP SWITC

ONDIP SWITCH SETTING

ONDIP SWITCH S

ONDIP SWITCH SE

ONDIP SWITCH SET

ONDIP SWITCH SETT

ONDIP SWITCH SETTI

ONDIP SWITCH SETTIN

ONDIP SWITCH SETTING

TO " UPDATEUUPUPDUPDAUPDATUPDATE SECURITYUPDATE SUPDATE SEUPDATE SECUPDATE SECUUPDATE SECURUPDATE SECURIUPDATE SECURITUPDATE SECURITYAND

UPDATE SECURITYA

UPDATE SECURITYAN

UPDATE SECURITYAND SAVE

UPDATE SECURITYAND S

UPDATE SECURITYAND SA

UPDATE SECURITYAND SAV

UPDATE SECURITYAND SAVE " MENUMMEMENMENU

ZERO

MENU

Z

MENU

ZE

MENU

ZER

MENU

ZERO ZEROZZEZERZERO

AdJAAdAdJ PAdJ P" "FROMFFRFROFROM MENUSFROM MFROM MEFROM MENFROM MENUFROM MENUS

SAuESSASAuSAuE noSAuE nSAuE no YESSAuE no YSAuE no YESAuE no YES

SEC

SAuE no YES

S

SAuE no YES

SE

SAuE no YES

SEC 0

SAuE no YES

SEC 0 SEC

SAuE no YES

SEC 0 S

SAuE no YES

SEC 0 SE

SAuE no YES

SEC 0 SEC 1

SAuE no YES

SEC 0 SEC 1 SEC

SAuE no YES

SEC 0 SEC 1 S

SAuE no YES

SEC 0 SEC 1 SE

SAuE no YES

SEC 0 SEC 1 SEC 2

SAuE no YES

SEC 0 SEC 1 SEC 2 SEC

SAuE no YES

SEC 0 SEC 1 SEC 2 S

SAuE no YES

SEC 0 SEC 1 SEC 2 SE

SAuE no YES

SEC 0 SEC 1 SEC 2 SEC 3

SAuE no YES


FROM

SAuE no YES


F

SAuE no YES


FR

SAuE no YES


FRO

SAuE no YES


FROM "

SAuE no YES


FROM " UPDATE

SAuE no YES


FROM " U

SAuE no YES


FROM " UP

SAuE no YES


FROM " UPD

SAuE no YES


FROM " UPDA

SAuE no YES


FROM " UPDAT

SAuE no YES


FROM " UPDATE SECURITY

SAuE no YES


FROM " UPDATE S

SAuE no YES


FROM " UPDATE SE

SAuE no YES


FROM " UPDATE SEC

SAuE no YES


FROM " UPDATE SECU

SAuE no YES


FROM " UPDATE SECUR

SAuE no YES


FROM " UPDATE SECURI

SAuE no YES


FROM " UPDATE SECURIT

SAuE no YES


FROM " UPDATE SECURITYAND

SAuE no YES


FROM " UPDATE SECURIT YA

SAuE no YES


FROM " UPDATE SECURIT YAN

SAuE no YES


FROM " UPDATE SECURIT YAND SAVE

SAuE no YES


FROM " UPDATE SECURIT YAND S

SAuE no YES


FROM " UPDATE SECURIT YAND SA

SAuE no YES


FROM " UPDATE SECURIT YAND SAV

SAuE no YES


FROM " UPDATE SECURIT YAND SAVE "

SAuE no YES


FROM " UPDATE SECURIT YAND SAVE " MENU

SAuE no YES


FROM " UPDATE SECURIT YAND SAVE " M

SAuE no YES


FROM " UPDATE SECURIT YAND SAVE " ME

SAuE no YES


FROM " UPDATE SECURIT YAND SAVE " MEN

SAuE no YES


FROM " UPDATE SECURIT YAND SAVE " MENU

UPDATEUUPUPDUPDAUPDATUPDATE SECURITYUPDATE SUPDATE SEUPDATE SECUPDATE SECUUPDATE SECURUPDATE SECURIUPDATE SECURITUPDATE SECURITYLEVELUPDATE SECURITYLUPDATE SECURITYLEUPDATE SECURITYLEVUPDATE SECURITYLEVEUPDATE SECURITYLEVEL

SAVE

UPDATE SECURITYLEVEL

S


SA


SAV


SAVE CHANGES


SAVE C


SAVE CH


SAVE CHA


SAVE CHAN


SAVE CHANG


SAVE CHANGE


SAVE CHANGES

ZEROUPDATE SECURITYLEVEL

SAVE CHANGES

ZUPDATE SECURITYLEVEL

SAVE CHANGES

ZEUPDATE SECURITYLEVEL

SAVE CHANGES

ZERUPDATE SECURITYLEVEL

SAVE CHANGES

ZERO ZEROZZEZERZERO

ZEROZZEZERZERO

ZEROZZEZERZERO

ZEROZZEZERZERO

ZEROZZEZERZERO

SPANSSPSPASPAN SPANSPAN SSPAN SPSPAN SPASPAN SPAN

SPAN

SPAN SPAN

S

SPAN SPAN

SP

SPAN SPAN

SPA

SPAN SPAN

SPANSPAN

SPAN SPAN

SPANS

SPAN SPAN

SPANSP

SPAN SPAN

SPANSPA

SPAN SPAN

SPANSPAN

SPANSPAN SPAN

SPANSPAN

SSPAN SPAN

SPANSPAN

SPSPAN SPAN

SPANSPAN

SPASPAN SPAN

SPANSPAN

SPANSPANSPAN SPAN

SPANSPAN

SPANSSPAN SPAN

SPANSPAN

SPANSPSPAN SPAN

SPANSPAN

SPANSPASPAN SPAN

SPANSPAN

SPANSPAN

SPANSSPSPASPAN UPONUUPUPOUPON RELEASEUPON RUPON REUPON RELUPON RELEUPON RELEAUPON RELEASUPON RELEASE

0.000.0.0W

0.0WC

0.0WCin

0.0WCi

0.0WCin

HOME0.0WCin

H0.0WCin

HO0.0WCin

HOM0.0WCin

HOME POSITION0.0WCin

HOME P0.0WCin

HOME PO0.0WCin

HOME POS0.0WCin

HOME POSI0.0WCin

HOME POSIT0.0WCin

HOME POSITI0.0WCin

HOME POSITIO0.0WCin

HOME POSITION

SPAN

SPANSSPSPASPAN

FROM

SPAN

F

SPAN

FR

SPAN

FRO

SPAN

FROM AVERAGING

SPAN

FROM A

SPAN

FROM AV

SPAN

FROM AVE

SPAN

FROM AVER

SPAN

FROM AVERA

SPAN

FROM AVERAG

SPAN

FROM AVERAGI

SPAN

FROM AVERAGIN

SPAN

FROM AVERAGING MENU

SPAN

FROM AVERAGING M

SPAN

FROM AVERAGING ME

SPAN

FROM AVERAGING MEN

SPAN

FROM AVERAGING MENU

FLOWFFLFLOFLOW MODEFLOW MFLOW MOFLOW MODFLOW MODE MENUFLOW MODE MFLOW MODE MEFLOW MODE MENFLOW MODE MENU

UnitUUnUniUnit UnitUnit UUnit UnUnit UniUnit UnitSELECTED Unit UnitS Unit UnitSE Unit UnitSEL Unit UnitSELE Unit UnitSELEC Unit UnitSELECT Unit UnitSELECTE Unit UnitSELECTED UNITS Unit UnitSELECTED U Unit UnitSELECTED UN Unit UnitSELECTED UNI Unit UnitSELECTED UNIT Unit UnitSELECTED UNITSDISPLAYED Unit UnitSELECTED UNITSD Unit UnitSELECTED UNITSDI Unit UnitSELECTED UNITSDIS Unit UnitSELECTED UNITSDISP Unit UnitSELECTED UNITSDISPL Unit UnitSELECTED UNITSDISPLA Unit UnitSELECTED UNITSDISPLAY Unit UnitSELECTED UNITSDISPLAYE Unit UnitSELECTED UNITSDISPLAYED ORUnit UnitSELECTED UNITSDISPLAYED OUnit UnitSELECTED UNITSDISPLAYED OR

UNITSUnit UnitSELECTED UNITS

DISPLAYED ORU

Unit UnitSELECTED UNITSDISPLAYED OR

UNUnit UnitSELECTED UNITS

DISPLAYED ORUNI


UNITUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECTED


UNITS SUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SE


UNITS SELUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELE


UNITS SELECUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECT


UNITS SELECTEUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECTEDBYUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECTEDBUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECTEDBY DIPUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECTEDBY DUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECTEDBY DIUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECTEDBY DIP SWITCHUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECTEDBY DIP SUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECTEDBY DIP SWUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECTEDBY DIP SWIUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECTEDBY DIP SWITUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECTEDBY DIP SWITCUnit UnitSELECTED UNITS

DISPLAYED ORUNITS SELECTEDBY DIP SWITCHSETTING


UNITS SELECTEDBY DIP SWITC HS


UNITS SELECTEDBY DIP SWITC HSE


UNITS SELECTEDBY DIP SWITC HSET


UNITS SELECTEDBY DIP SWITC HSETT


UNITS SELECTEDBY DIP SWITC HSETTI


UNITS SELECTEDBY DIP SWITC HSETTIN


UNITS SELECTEDBY DIP SWITC HSETTING

10001101001000

1000

1000

1

1000

10

1000

100

1000

1000

ArEA 1000

1000

A 1000

1000

Ar 1000

1000

ArE 1000

1000

ArEAARE

ARE

AA

A

A

A

M

M

MC

F

FF H33

SPANSSPSPASPAN

UPONUUPUPOUPON RELEASEUPON RUPON REUPON RELUPON RELEUPON RELEAUPON RELEASUPON RELEASE

SQ.SSQSQ. FEETSQ. FSQ. FESQ. FEESQ. FEET ORSQ. FEET OSQ. FEET OR SQ.SQ. FEET OR SSQ. FEET OR SQSQ. FEET OR SQ. METERSSQ. FEET OR SQ. MSQ. FEET OR SQ. MESQ. FEET OR SQ. METSQ. FEET OR SQ. METESQ. FEET OR SQ. METERSQ. FEET OR SQ. METERS BASEDSQ. FEET OR SQ. METERS BSQ. FEET OR SQ. METERS BASQ. FEET OR SQ. METERS BASSQ. FEET OR SQ. METERS BASESQ. FEET OR SQ. METERS BASEDONSQ. FEET OR SQ. METERS BASEDOSQ. FEET OR SQ. METERS BASEDON DIPSQ. FEET OR SQ. METERS BASEDON DSQ. FEET OR SQ. METERS BASEDON DISQ. FEET OR SQ. METERS BASEDON DIP SWITCHSQ. FEET OR SQ. METERS BASEDON DIP SSQ. FEET OR SQ. METERS BASEDON DIP SWSQ. FEET OR SQ. METERS BASEDON DIP SWISQ. FEET OR SQ. METERS BASEDON DIP SWITSQ. FEET OR SQ. METERS BASEDON DIP SWITCSQ. FEET OR SQ. METERS BASEDON DIP SWITCH SETTINGSQ. FEET OR SQ. METERS BASEDON DIP SWITCH SSQ. FEET OR SQ. METERS BASEDON DIP SWITCH SESQ. FEET OR SQ. METERS BASEDON DIP SWITCH SETSQ. FEET OR SQ. METERS BASEDON DIP SWITCH SETTSQ. FEET OR SQ. METERS BASEDON DIP SWITCH SETTISQ. FEET OR SQ. METERS BASEDON DIP SWITCH SETTINSQ. FEET OR SQ. METERS BASEDON DIP SWITCH SETTING

ZERO

SQ. FEET OR SQ. METERS BASEDON DIP SWITCH SETTING

Z


ZE


ZER


ZERO

SPAN


SELECT

INCREMENTDIGIT

S

INCREMENTDIGIT

SE

INCREMENTDIGIT

SEL

INCREMENTDIGIT

SELE

INCREMENTDIGIT

SELEC

INCREMENTDIGIT

SELECTDIGIT

INCREMENTDIGIT

SELECTD

INCREMENTDIGIT

SELECTDI

INCREMENTDIGIT

SELECTDIG

INCREMENTDIGIT

SELECTDIGI

INCREMENTDIGIT

SELECTDIGIT

FoHFFoFoH

SPANSSPSPASPAN


SPANSSPSPASPAN

SPANSSPSPASPAN

SPANSSPSPASPAN

SPANSSPSPASPAN

ADJUSTAADADJADJUADJUSADJUST FLOWADJUST FADJUST FLADJUST FLOADJUST FLOWOUTPUTADJUST FLO WOADJUST FLOWOUADJUST FLO WOUTADJUST FLO WOUTPADJUST FLO WOUTPUADJUST FLO WOUTPUT HIGHADJUST FLO WOUTPUT HADJUST FLO WOUTPUT HIADJUST FLO WOUTPUT HIGADJUST FLO WOUTPUT HIGH

UPONADJUST FLO WOUTPUT HIGH

UADJUST FLO WOUTPUT HIGH

UPADJUST FLO WOUTPUT HIGH

UPOADJUST FLO WOUTPUT HIGH

UPON RELEASEADJUST FLO WOUTPUT HIGH

UPON RADJUST FLO WOUTPUT HIGH

UPON READJUST FLO WOUTPUT HIGH

UPON RELADJUST FLO WOUTPUT HIGH

UPON RELEADJUST FLO WOUTPUT HIGH

UPON RELEAADJUST FLO WOUTPUT HIGH

UPON RELEASADJUST FLO WOUTPUT HIGH

UPON RELEASE

UPON

ADJUST FLO WOUTPUT HIGH

UPON RELEASE

U


UPON RELEASE

UP


UPON RELEASE

UPO


UPON RELEASE

UPON RELEASE


UPON RELEASE

UPON R


UPON RELEASE

UPON RE


UPON RELEASE

UPON REL


UPON RELEASE

UPON RELE


UPON RELEASE

UPON RELEA


UPON RELEASE

UPON RELEAS


UPON RELEASE

UPON RELEASE

UPON


UPON RELEASE

UPON RELEASE

U


UPON RELEASE

UPON RELEASE

UP


UPON RELEASE

UPON RELEASE

UPO


UPON RELEASE

UPON RELEASE

UPON RELEASE


UPON RELEASE

UPON RELEASE

UPON R


UPON RELEASE

UPON RELEASE

UPON RE


UPON RELEASE

UPON RELEASE

UPON REL


UPON RELEASE

UPON RELEASE

UPON RELE


UPON RELEASE

UPON RELEASE

UPON RELEA


UPON RELEASE

UPON RELEASE

UPON RELEAS


UPON RELEASE

UPON RELEASE

UPON RELEASE

ZERO

ZEROZZEZERZERO

ZEROZZEZERZERO

ZERO

SPAN

SPAN


INCREMENT

INCREMENTDIGIT

I

INCREMENTDIGIT

IN

INCREMENTDIGIT

INC

INCREMENTDIGIT

INCR

INCREMENTDIGIT

INCRE

INCREMENTDIGIT

INCREM

INCREMENTDIGIT

INCREME

INCREMENTDIGIT

INCREMEN

INCREMENTDIGIT

INCREMENTDIGIT

INCREMENTDIGIT

INCREMENTD

INCREMENTDIGIT

INCREMENTDI

INCREMENTDIGIT

INCREMENTDIG

INCREMENTDIGIT

INCREMENTDIGI

INCREMENTDIGIT

INCREMENTDIGIT

SELECT

INCREMENTDIGIT

INCREMENTDIGIT

S

INCREMENTDIGIT

INCREMENTDIGIT

SE

INCREMENTDIGIT

INCREMENTDIGIT

SEL

INCREMENTDIGIT

INCREMENTDIGIT

SELE

INCREMENTDIGIT

INCREMENTDIGIT

SELEC

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

INCREMENTDIGIT

INCREMENTDIGIT

SELECTD

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDI

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIG

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGI

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECT

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

S

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SE

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SEL

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELE

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELEC

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDIGIT

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTD

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDI

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDIG

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDIGI

INCREMENTDIGIT

INCREMENTDIGIT

SELECTDIGIT

SELECTDIGIT

TOTTO "UPDATEUUPUPDUPDAUPDATUPDATE SECURITYUPDATE SUPDATE SEUPDATE SECUPDATE SECUUPDATE SECURUPDATE SECURIUPDATE SECURITUPDATE SECURITYAND

UPDATE SECURITYA

UPDATE SECURITYAN

UPDATE SECURITYAND SAVE

UPDATE SECURITYAND S

UPDATE SECURITYAND SA

UPDATE SECURITYAND SAV

UPDATE SECURITYAND SAVE "MENUMMEMENMENU

02330020230233

0233

0233

0

0233

02

0233

023

0233

0233

o

0233

0233

o AdJ

0233

0233

o A

0233

0233

o Ad

0233

0233

o AdJ AdJ

0233

0233

o AdJ A

0233

0233

o AdJ Ad

0233

0233

o AdJ AdJ AdJ

0233

0233

o AdJ AdJ A

0233

0233

o AdJ AdJ Ad

0233

0233

o AdJ AdJ AdJF

0233

0233

o AdJ AdJ AdJF P

0233

0233

o AdJ AdJ AdJF P

diSP

0233

0233

o AdJ AdJ AdJF P

d

0233

0233

o AdJ AdJ AdJF P

di

0233

0233

o AdJ AdJ AdJF P

diS

0233

0233

o AdJ AdJ AdJF P

diSP d1000

0233

0233

o AdJ AdJ AdJF P

diSP d

0233

0233

o AdJ AdJ AdJF P

diSP d1

0233

0233

o AdJ AdJ AdJF P

diSP d10

0233

0233

o AdJ AdJ AdJF P

diSP d100

0233

0233

o AdJ AdJ AdJF P

diSP d1000K

ADJUSTAADADJADJUADJUSADJUST DISPLAYADJUST DADJUST DIADJUST DISADJUST DISPADJUST DISPLADJUST DISPLAADJUST DISPLAYKADJUST DISPLAYK FACTORADJUST DISPLAYK FADJUST DISPLAYK FAADJUST DISPLAYK FACADJUST DISPLAYK FACTADJUST DISPLAYK FACTOADJUST DISPLAYK FACTOR

SELECTSSESELSELESELECSELECT MAXIMUMSELECT MSELECT MASELECT MAXSELECT MAXISELECT MAXIMSELECT MAXIMUSELECT MAXIMUM OUTPUTSELECT MAXIMUM OSELECT MAXIMUM OUSELECT MAXIMUM OUTSELECT MAXIMUM OUTPSELECT MAXIMUM OUTPUSELECT MAXIMUM OUTPUTSETSELECT MAXIMUM OUTPUTSSELECT MAXIMUM OUTPUTSESELECT MAXIMUM OUTPUTSET BYSELECT MAXIMUM OUTPUTSET BSELECT MAXIMUM OUTPUTSET BY PRESSURESELECT MAXIMUM OUTPUTSET BY PSELECT MAXIMUM OUTPUTSET BY PRSELECT MAXIMUM OUTPUTSET BY PRESELECT MAXIMUM OUTPUTSET BY PRESSELECT MAXIMUM OUTPUTSET BY PRESSSELECT MAXIMUM OUTPUTSET BY PRESSUSELECT MAXIMUM OUTPUTSET BY PRESSURSELECT MAXIMUM OUTPUTSET BY PRESSURE ORSELECT MAXIMUM OUTPUTSET BY PRESSURE OSELECT MAXIMUM OUTPUTSET BY PRESSURE ORFLOW

SELECT MAXIMUM OUTPUTSET BY PRESSURE ORF

SELECT MAXIMUM OUTPUTSET BY PRESSURE ORFL

SELECT MAXIMUM OUTPUTSET BY PRESSURE ORFLO

SELECT MAXIMUM OUTPUTSET BY PRESSURE ORFLOW

FPMFFPFPM OR M/SMM/M/S BASEDM/S BM/S BAM/S BASM/S BASEM/S BASEDON

M/S BASEDO

M/S BASEDON DIP

M/S BASEDON D

M/S BASEDON DI

M/S BASEDON DIP SWITCH

M/S BASEDON DIP S

M/S BASEDON DIP SW

M/S BASEDON DIP SWI

M/S BASEDON DIP SWIT

M/S BASEDON DIP SWITC

M/S BASEDON DIP SWITCH SETTING

M/S BASEDON DIP SWITCH S

M/S BASEDON DIP SWITCH SE

M/S BASEDON DIP SWITCH SET

M/S BASEDON DIP SWITCH SETT

M/S BASEDON DIP SWITCH SETTI

M/S BASEDON DIP SWITCH SETTIN

M/S BASEDON DIP SWITCH SETTING

TOTTO PoHTO PTO PoTO PoH ,PRESSUREPPRPREPRESPRESSPRESSUPRESSURPRESSUREMODE

PRESSUREM

PRESSUREMO

PRESSUREMOD

PRESSUREMODE MENU

PRESSUREMODE M

PRESSUREMODE ME

PRESSUREMODE MEN

PRESSUREMODE MENU

MC FF

M H3

K

K

K

©Copyright 2016 Dwyer Instruments, Inc. Printed in U.S.A. 6/17 FR# 444021-10 Rev. 5

DWYeR INSTRUMeNTS, INC. Phone: 219/879-8000 www.dwyer-inst.com P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. fax: 219/872-9057 e-mail: [email protected]

Documents

Series MS2 Magnesense II Differential Pressure … Series MS2 Magnesense ® II Differential Pressure Transmitter with BACnet Communication Protocol combines the proven stable Hall