Embed Size (px)
Citation preview
Actual Size
SERIES HF1008RHF1008
Unshielded Surface Mount Inductors
SRF MINIMUM (MHz)
DASH NUMBER*
INDUCTANCE (nH)
Q MINIMUM
TEST FREQUENCY (MHz)
DC RESISTANCE
MAXIMUM (OHMS)
CURRENT RATING
MAXIMUM (mA)
TOLERANCE
Physical Parameters Inches MillimetersA 0.095 to 0.115 2.41 to 2.92B 0.085 to 0.105 2.16 to 2.66C 0.075 to 0.095 1.91 to 2.41D 0.010 to 0.030 0.26 to 0.76E 0.040 to 0.060 1.02 to 1.52F 0.060 (Ref. only) 1.52 (Ref. only)G 0.045 (Ref. only) 1.14 (Ref. only)Dimensions “A” and “C” are over terminals.
Weight Max. (Grams) 0.1
Operating Temperature Range –55°C to +125°C
Current Rating at 90°C Ambient 35°C Rise
Maximum Power Dissipation at 90°CNon-magnetic: 0.169 WFerrite: 0.208 W Note Consult factory for custom applications
Marking DELEVAN; dash number followed by HF; datecode (YYWWL). Note: An R before the date code indicatesa RoHS component.Example: HF1008-471K DELEVAN 471 HF 1825A
Packaging Tape & reel (8mm): 7" reel, 2000 pieces max.;13" reel, 7000 pieces max.
Made In the U.S.A.
SERIES HF1008 NON-MAGNETIC CORE-047M-082M-100M-120M-150M-180M-220M-270M-330M-390M-470M-560K-680K-820K-101K
SERIES HF1008 FERRITE CORE-121K-151K-181K-221K-271K-331K-391K-471K-561K-621K-681K-751K-821K-911K-102K-122K-152K-182K-222K-272K-332K-392K-472K
RF Inductors
270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: [email protected] • www.delevan.com
13201275123510751053965950930900870847570550390375
405395375360345330320310300290280275273270325320315305300285280275273
0.070 0.075 0.080 0.105 0.110 0.130 0.135 0.140 0.150 0.160 0.170 0.370 0.400 0.800 0.850
0.910 0.950 1.05 1.15 1.25 1.35 1.45 1.55 1.65 1.75 1.85 1.95 2.00 2.05 1.40 1.45 1.50 1.60 1.65 1.80 1.90 1.95 2.00
>3000>3000>300027002400225020001800160015001350120010501000900
850800700600550500465425415375340330325305290200165150120110605040
50 50 50 50 50 50 50 50 50 50 50 50 50 50 25
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9
404030303030303030303020201515
3030303030303030303030303030303030303030303030
±20%±20%±20%±20%±20%±20%±20%±20%±20%±20%±20%±10%±10%±10%±10%
±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%±10%
4.7 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100
120 150 180 220 270 330 390 470 560 620 680 750 820 910 1000 1200 1500 1800 2200 2700 3300 3900 4700
Optional Tolerances: J = 5% H = 3% G = 2% F = 1%
*Complete part # must include series # PLUS the dash #
For surface finish information, refer to www.delevanfinishes.com
8/2018
