Click here to load reader

Series F11 - MultAlloy · PDF file Series F11 2pc. 1000 psi cwp API 598 Valve Inspection and Testing ASME/ANSI B16.34 Valves Flanged, Threaded, and Welding End ANSI B1.20. Machining

  • View
    0

  • Download
    0

Embed Size (px)

Text of Series F11 - MultAlloy · PDF file Series F11 2pc. 1000 psi cwp API 598 Valve Inspection and...

  • · TWO PIECE BODY · FULL PORT · INVESTMENT CAST BODY · BLOWOUT-PROOF STEM · LOCKING DEVICE · ACT. MOUNTING PAD · SIZE RANGE: 1/4” – 3”

    · 1000 PSI WOG CWP

    · 150 PSI SATURATED STEAM

    F e a t u r e s

    P/N 1.5.01

    Series F11 2pc. 1000 psi cwp

    API 598 Valve Inspection and Testing

    ASME/ANSI B16.34 Valves Flanged, Threaded, and Welding End

    ANSI B1.20. Machining of NPT Threaded Ends

    ANSI B16.11 Machining of Socket Weld Ends

    ANSI B16.25 Machining of Butt Weld Ends

    MSS SP-72-1992 Ball Valves General Service

    ISO 5211 Part-turn Valve Actuator Attachment

  • Dimensions Series F11

    P/N 1.5.02

    mm - in bold Size 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3

    A 51 51 54 58 66 72 81.5 90.5 138.5 149 2.01 2.01 2.13 2.28 2.60 2.83 3.21 3.56 5.45 5.87

    B 51 51 59.5 71 88.6 97.5 109.5 133.5 167 192 2.01 2.01 2.34 2.80 3.49 3.84 4.31 5.26 6.57 7.56

    C 103 103 103 125 145 145 190 190 250 250 4.06 4.06 4.06 4.92 5.71 5.71 7.48 7.48 9.84 9.84

    DN 11.6 12.7 15 20 25.4 32 38 50.8 65 76 0.46 0.50 0.59 0.79 1.00 1.26 1.50 2.00 2.56 2.99

    F 36 36 36 42 42 42 50 50 70 70 1.42 1.42 1.42 1.65 1.65 1.65 1.97 1.97 2.76 2.76

    ISO 5211 F03 F03 F03 F04 F04 F04 F05 F05 F07 F07 G M5 M5 M5 M5 M5 M5 M6 M6 M8 M8

    N 5 5 5 6.5 8 8 9.7 9.7 12 12

    0.20 0.20 0.20 0.26 0.31 0.31 0.38 0.38 0.47 0.47

    S1 17 17 17 18 21 22 22 22 36 41

    0.65 0.65 0.65 0.7 0.84 0.87 0.87 0.87 1.4 1.61

    S2 11 11 11 10 15 16 16 17 27 32

    0.44 0.44 0.44 0.4 0.58 0.62 0.62 0.65 1.05 1.27

  • Engineering Data

    CF Series F11 with actuator

    Size Cv gpm

    Weight Lbs.

    Torque In./lbs.

    1/4” 6 0.5 36

    3/8” 7 0.5 36

    1/2” 10 0.7 68

    3/4” 25 1.2 104

    1” 35 2.1 130

    1-1/4” 46 3.1 174

    1-1/2” 80 5.1 217

    2” 110 8 260

    2-1/2” 310 14 430

    3” 360 23 870

    pr es

    su re

    in p

    si

    temperature in degrees F

    Pressure / Temperature Rating

    P/N 1.5.03

    Use the actuator sizing below to estimate the amount of space needed to install the stated CF automation assembly. The valve and actuator combinations are configured according to the above torque figures reflecting the maximum "seatbreak" torque required to move the ball from fully open or closed position and reseat the valve in clean/wet

    service at ambient temperature and valve's maximum working pressure. A number of factors may increase the operating torque of these valves. Therefore, size the actuator for your specific conditions. If unsure, select a larger actuator.

    Size DA series Pneumatic

    SR series Pneumatic

    Electric actuator

    1/4” 6.50 DA32

    7.45 SR52

    9.5 LCR-150

    3/8” 6.50 DA32

    7.45 SR52

    9.5 LCR-150

    1/2” 6.75 DA32

    6.65 SR52

    9.8 LCR-150

    3/4” 6.75 DA52 SR63

    7.23 10.0 LCR-150

    1” 6.95 DA52

    6.95 SR75

    10.25 LCR-150

    1-1/4” 7.25 DA63

    8.25 SR85

    11.50 LCR-300

    1-1/2” 8.55 DA63

    8.75 SR85

    11.50 LCR-300

    2” 8.75 DA63

    10.25 SR100

    13.00 LCR-300

    2-1/2” 11.25 DA75

    12.75 SR100

    15.50 LCR-600

    3” 15.75 DA85

    16.35 SR115

    18.00 VW1000

  • P/N 1.5.04

    Ordering Number System

    Part Name MaterialNo.

    1 Body CF8M

    2 End Cap CF8M

    3 Seat RPTFE

    4 Ball 316SS

    5 Body Seal PTFE

    6 Thrust Washer PTFE

    7 Stem 316SS

    8 Packing PTFE

    9 Packing Nut AISI 304

    10 Lever AISI 304

    11 Lock Washer AISI 304

    12 Lever Nut AISI 304

    13 Lever AISI 304

    C ASTM A351 gr. CF8M 316 Stainless Steel

    SR,DA Pneumatic Actuator LC,V Electric Actuator - No Options 1 Manual Gear Operator 2 Extended Stem Manual Operator 3 Round/Oval Handwheel Operator 4 Cryogenic Extension 5 Cleaned for Oxygen Service 6 Spring Return Lever Operator 7 Spring Return with fusible link 0 Other

    F11 Two piece, Full Port 1000psi CWP WOG 1/4”-3”

    S Screwed End - SE, NPT

    R 15% Glass Reinforced PTFE T Virgin PTFE P PEEK C Carbon Graphite RPTFE S Stainless Steel RPTFE

    bodymaterial size

    R C 1F11 series ends seats

    S valve options

    SERIES

    VALVE OPTIONS

    ENDS

    SEATS

    BODY MATERIAL

    Due to our dynamic product development and innovation, CF Fluid Controls Inc. reserves the right to modify any of the products and information within this brochure without prior notification.

    Components