Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
An affordable high-perfor-mance aerospace grade pump designed to provide thousands of hours of reliable operation with virtually all fuels, heat transfer fluids, refrigerants and low-viscosity oils.
• Flows to 6.5 liters/minute
• Pressures to 15 bar
Series 300 – 100 Hi-Rel Fuel and Coolant Pumps
[email protected] x 111
Powerful 28V brushless DC pump drive motor and control
65 Forest Falls Drive, Yarmouth, ME 04096 USA | 1-207-846-6202 | casconpump.com page 1 / 2
casconpump.com
Actual Size
• Rated for up to 100 Watts and100°C.
• Available in both constant and variable speed/flow configurations.
• Suitable for closed-loop control.
The pump control has a heritage in Cascon’s military UAV and avionics cooling applications, is proven in both industrial and aerospace applications and is designed to match the drive motor for maximum performance.
Based on technology developed by Cascon for space flight and military products, this flexible package is available in a variety of build-to-order configurations to provide the displacement, fluid inter-faces and control options suited to your particular system design.
• Gerotor-type pumping element close-coupled to the drive motor
• Leak free sealless design • Ingress protection rating of IP67 • Exterior surfaces anodized per MIL-A-8625, TYPE II,
CLASS 1 for corrosion protection • Mounting base prepared per MIL-DTL-5541 for EMI grounding • Single-piece 6061-T6 aluminum housing with integral mounting
points provides a ruggedized package.
Precision Gerotor and IGR Technology provides for simple, robust positive dis-placement pumping
Interface Data1. Electrical
Connection Glenair 800-012-07M8-28PN, Suggested mate: 800-006-16ZR8-28SN
Input Voltage Supply 22-32 Vdc
Input Current 7 Amp (internal limit)
Speed/Flow Command Signal
0-5V
Speed Feedback 5 V Square Wave
2. Mechanical
Mounting Provision for (4) #6-32 Screws
Fluid Connection SAE J1926 O-ring Ports, Size -4 and -6 in Four Orientation Options
Weight ~650 g or 1.4 lbs
Series 300 – 100: Hi-Rel Fuel and Coolant Pumps
Typical Environmental Specifications3. RTCA DO-160G
Input Power 28V Category Z
Shock Section 7, Category B (20g)
Vibration Section 8, Category R
Other contact Cascon
4. MIL-STD-810
Various contact Cascon
5. Temperature
Maximum Operating Temp 100°C
Minimum Operating Temp -55°C
65 Forest Falls Drive, Yarmouth, ME 04096 USA | 1-207-846-6202 | casconpump.com page 2 / 2
Dimensions and Connections
Typical Performance Capability by Model Displacement MIL-C-7024 Type II Calibration Fluid, 25°C
1.00.0
2
4
6
8
10
12
14
16
2.0 3.0 4.0
Flow (Liter/Minute)
Pres
sure
Ris
e (B
ar)
5.0 6.0 7.0 8.0
0.2 cc/rev
0.4 cc/rev
0.6 cc/rev
0.8 cc/rev1.0 cc/rev
P/N 300-D-100-XXXX-YYYYREV NONE S/N XXX
5.00 [ 127 ] MAX
GLENAIR 800-012-07M8-28PNSEE TABLE 1
OUTLETINLET
2X
2X
2.125[ 54 ]
1.25[ 31.8 ]
.875[ 22.2 ]
2.615[ 66.4 ]
1.70[ 43.2 ]
.63[ 16 ]
3.125[ 79.4 ]
Electrical ConnectionsPIN Function
1 22-32 VDC Supply
2 N/C
3 N/C
4 22-32 VDC Return
5 N/C
6 Speed Feedback
7 N/C
8 Speed Command
Dimensions in inches [mm]
Configure-to-OrderProject 300 – 100 pumps are available on a configure-to-order basis. Some models in stock.Visit casconpump.com for information on other configurable and custom pump products.