SEM-IV:FLUID MECHANICS CRASH @THANE May …kazisir.com/TimeTable/VTIMETABLE.pdfWorking principle, Parson’s reaction turbine, Derivations for maximum blade efficiency Numerical on

Dadar: Thane: Room No.305, 3rd Floor, Laxmi commercial complex, Near Dadar Manish Market, 201, Thakur Niwas, Besides Tip-Top Mithaiwala, Next to 'Phool Market', Senapati Bapat Marg, Station Road, Dadar (W), Mumbai Thane (w), 400 601

M: 9324604565 │ www.kazisir.com │ For On-line payment details, please contact us Page | 1

Dadar: Thane: Room No.305, 3rd Floor, Laxmi commercial complex, Room No: 202; Thakur Niwas, Besides Tip-Top Mithaiwala Near Dadar Manish Market, 201, Thakur Niwas, Besides Tip-Top Mithaiwala, Next to 'Phool Market', Senapati Bapat Marg, Station Road, Dadar (W), Mumbai Thane (w), 400 601

M: 9324604565 M: 9324604565

TIME TABLE FOR DEC-18 EXAM

INDEX TABLE

SEM-III TIME TABLE Page-01 SEM-V TIME TABLE Page-02 - 05

SEM-VII TIME TABLE Page-06

GATE-2019 TIME TABLE Page-07

GATE-2020 TIME TABLE Page-08

SEM-III BATCHES

R EGU LA R B A TC HE S

Subject Taken by Centre Day Time Start. Date Extra Lecture Fees

Thermodynamics Mech/Auto Kazi Sir

Dadar Saturday 4:30 pm – 9:30 pm 14th July 2018 Extra lect on Public Holidays

7500/- Thane Wednesday 6:30 pm – 9:45 pm 17th July 2018 Extra lect on alternate

Tuesday 6.30 pm-9.45 pm

Borivali Friday 6:30 pm – 9:45 pm 20th July 2018 Extra lect on alternate

Tuesday 6.30 pm-9.45 pm

S.O.M. Mech/Auto/Civil

Kais Sir Dadar Wednesday 6:30 pm – 9:45 pm 18th July 2018 Extra Lect on Public Holidays

7000/- Thane Friday 6:30 pm – 9:45 pm 20th July 2018 Extra lect on Public Holiday

Maths-III All Branches

MMP Sir

Dadar Saturday 9:00 am – 12:30 pm 14th July 2018 Extra lect on Public Holiday

7000/- Thane Sunday 12:30 pm – 3:30 pm 15th July 2018 Extra lect on Public Holiday

Wednesday 6:30 pm – 9:00 pm 18th July 2018 Extra lect on Public Holiday

Anup Sir Diploma to Degree

Thane Sunday 3:30 pm – 6:30 pm 15th July 2018 Extra lect on Public Holiday

BOUQUET FEES STRUCTURE

Bouquet No. Subjects in Bouquet Basic Fees Bouquet Fees

A-01 Thermo + SOM 14500/- 13500/-

A-02 Thermo + Maths-III 14500/ 13500/-

A-03 Thermo + SOM + Maths-III 21500/- 20000/- Note: If a student take one subject initially and later on enrol for any of the Bouquet subjects, still he/she will be entitled to get benefits of corresponding ‘Bouquet Fees’.

Sr. No. Name of the Student College Subject Marks out of 100

1. Tayyabali Chaugule Fr. Agnel Thermodynamics 96

2. Tinwala Adnan Saboo Siddik Thermodynamics 95

3. Saurabh Chaudhari L R Tiwari Thermodynamics 93

4. Shilpa Shah Tasgaonkar Thermodynamics 93

5. Saif Shaikh Rizvi Thermodynamics 93

6. Aniket Nair LTCOE Thermodynamics 92

7. Dilip Kanojia L R Tiwari Thermodynamics 92

8. Najid Tisekar Fr. Agnel Thermodynamics 91

9. Mohatassim Kamle Saboo Siddik Thermodynamics 91

10. Saurabh Patil KGCE Thermodynamics 91

11. Melvi D’Silva DBIT Thermodynamics 91

12. Sushant Pawar DMCE Thermodynamics 91

13. Shaikh Afan Kalsekar Thermodynamics 91

14. Umesh Yadav Thakur Thermodynamics 90

15. Hiranand Vhangade Vartak Thermodynamics 90

16. Pratik kadam Bharat Thermodynamics 90

17. Kyle Gracias DBIT Thermodynamics 89

18. Sayed Shehbaz Saboo Siddik Thermodynamics 89

SEM-III MERIT HOLDERS




M: 9324604565 M: 9324604565

R EGU LA R B A TC HE S

Subject Taken by Centre Day Time Start. Date Extra Lecture Fees

DOM (Dynamics of Machinery)

Previously known as Vibrations

Kazi Sir

Dadar New Reg Batch

Sunday 8:30 am – 2:00 pm 15th July 2018 Details on pg-2

04 Extra lect on alternate Thursday

6.30 pm-9.45 pm 8000/-

Thane New Reg Batch

Sunday 5.00 pm – 9:30 pm 15th July 2018 Details on pg-2


6.30 pm-9.45 pm

Heat Transfer Kazi Sir

Dadar Saturday 08:30 am –1:30 pm 14th July 2018 Details on pg-3

---

7500/-

Thane Monday 6:30 pm – 9:45 pm 16th July 2018 Details on pg-3


6.30 pm-9.45 pm

PUB LIC HOL IDA Y B A TC H

Subject Taken by Centre Starting Date Time Note Fees

I C Engine Kazi Sir Dadar 15th August 2018

(Details on pg-3) 8:00 am -1:00 pm

Module 01 & 02 will be completed before UT-1 and Module 03 & 05

before UT-2. Thus students are getting prepared for both UT’s that will help

them to boost their UT score.

4500/-


Note: If a student take one subject initially and later on enrol for any of the Bouquet subjects, still he/she will be entitled to get benefits of corresponding ‘Bouquet Fees’.

SEM-V BATCHES


B-01 DOM + HT 15,500/- 14,500/-

B-02 DOM + ICE 12,500/- 11,500/-

B-03 HT + ICE 12,000/- 11,000/-

B-04 HT + TOM-II + ICE 20,000/- 18,500/-

SEM-V: I C ENGINE PUBLIC HOLIDAY BATCH SCHEDULE

Lect No Date Day Time Topic

01 15

th Aug 2018

Independence Day Wed 8:00 am – 1:00 pm

Module 01: Air Standard Cycles and Fuel-Air Cycles Concept & Numerical on Air Standard Cycles and Fuel-Air Cycles.

02 17

th Aug 2018

Parsi New Year Fri 8:00 am – 1:00 pm

Module 02: S.I. Engine Carburetor: Theory, Concept and Numerical

03 13

th Sept 2018

Ganesh Chaturthi Thu 8:00 am – 1:00 pm

Module 03: C.I. Engine Fuel Injection System: Concept and Numerical

04 20

th Sept 2018

Moharram Thu 8:00 am – 1:00 pm

Module 05: Engine Testing & Performance I.C. Engine Testing and Performance Formula development Numerical on performance parameter

05 02

nd Oct 2018

Gandhi Jayanti Tue 8:00 am – 1:00 pm

Numerical on Morse Test Numerical on Wilan’s Line Numerical on Heat Balance sheet calculations

06 18

th Oct 2018

Dussera Thu 8:00 am – 1:00 pm Numerical on Heat Balance sheet calculations contd…

07 08

th Nov 2018

Diwali 2nd

Day Wed 8:00 am – 1:00 pm

Module 04: Supercharged Engines Concept & Numerical on Supercharged Engine

Important theory topics-Concept and thorough explanation with the aid of

Audio-Video effect (based on analysis of 20 Past Year MU exam papers) 08

08th

Nov 2018 Bhaiya Dooj

Thu 8:00 am – 1:00 pm




M: 9324604565 M: 9324604565

SEM-V: DYNAMICS OF MACHINERY DADAR BATCH SCHEDULE


01 15th

July 2018 Sun 8:30 am to 2:00 pm Module-1.1:Governors Porter Governor: Concept, force analysis, governor effort & power, Numerical Hartnell governor: Concept, force analysis and numerical

Module-1.2:Gyroscope

Concept of gyroscopic couple, Gyroscopic effect on Naval Ships Gyroscopic effect on 4-wheeler vehicle moving along a circular path(Concept & Numerical) Gyroscopic effect on 2-wheeler vehicle moving along a circular path(Concept & Numerical)

02 19th

July 2018 Thu 6:30 pm to 9:30 pm

03 22nd

July 2018 Sun 8:30 am to 2:00 pm

04 29th

July 2018 Sun 8:30 am to 2:00 pm Module-3:Introduction to Vibration and Single DOF Free Un-damped Vibrations Concepts of SHM, Natural frequency, SEP, DOF, Equivalent system Methods to derive equations of motion Concept and numerical on evaluation of natural frequency of vibration for 1 dof Undamped system

05 05th

Aug 2018 Sun 8:30 am to 2:00 pm

06 12th

Aug 2018 Sun 8:30 am to 2:00 pm

07 19th

Aug 2018 Sun 8:30 am to 2:00 pm Module-4:Single DOF Free Damped Vibrations Concepts of damping, types, mathematical formulation and solution of governing equations of motion Concept and numerical on Underdamped system,, Critically damped system, Overdamped system 08 23

rd Aug 2018 Thu 6:30 pm to 9:30 pm

09 26th

Aug 2018 Sun 8:30 am to 2:00 pm Module-2.1:Static and Dynamic force analysis, Engine force analysis, in slider crank mechanism, evaluation of Turning moment on crank shaft

(Concept & Numerical)

10 02nd

Sept 2018 Sun 8:30 am to 2:00 pm Concept and numerical on Coulomb Damping

11 09th

Sept 2018 Sun 8:30 am to 2:00 pm

Module-5.1:Forced Vibration Concept & numerical on Forced Excitation and Motion Excitation

12 16th


13 20th

Sept 2018 Thu 6:30 pm to 9:30 pm

14 23rd


15 30th

Sept 2018 Sun 8:30 am to 2:00 pm Module-5.2:Vibration Isolation Concept & numerical on Forced Trasnsmissibility and Motion Trasnsmissibility 16 07

th Oct 2018 Sun 8:30 am to 2:00 pm

17 14th

Oct 2018 Sun 8:30 am to 2:00 pm Module-5.3:Vibration Measurement Concept & numerical on Vibrometer and Accelerometer

18 21st

Oct 2018 Sun 8:30 am to 2:00 pm Module-6.1:Rotor Dynamics

Concept & numerical on whirling (critical) speed of shaft

Module-6.2: Balancing Part (A): Balancing of rotating masses Concept & Numerical on balancing of rotary masses in same transverse plane and in different transverse planes Part (A): Balancing of reciprocating masses

Concept & Numerical on balancing of In-line engine, V-engine

19 25th

Oct 2018 Thu 6.30pm to 9.00 pm

20 28th

Oct 2018 Sun 8:30 am to 2:00 pm

SEM-V: DYNAMICS OF MACHINERY THANE BATCH SCHEDULE


01 15th

July 2018 Sun 5:00 pm to 9:30 pm Module-1.1:Governors Porter Governor: Concept, force analysis, governor effort & power, Numerical Hartnell governor: Concept, force analysis and numerical

Module-1.2:Gyroscope

Concept of gyroscopic couple, Gyroscopic effect on Naval Ships Gyroscopic effect on 4-wheeler vehicle moving along a circular path(Concept & Numerical) Gyroscopic effect on 2-wheeler vehicle moving along a circular path(Concept & Numerical)

02 22nd

July 2018 Sun 5:00 pm to 9:30 pm

03 26th

July 2018 Thu 6:30 pm to 9:45 pm

04 29th

July 2018 Sun 5:00 pm to 9:30 pm Module-2.1:Static and Dynamic force analysis, Engine force analysis, in slider crank mechanism, evaluation of Turning moment on crank shaft Module-2.2: Dynamically equivalent systems Concept & numerical on conversion of rigid body in to two mass without correction couple

05 05th

Aug 2018 Sun 5:00 pm to 9:30 pm

06 09th

Aug 2018 Thu 6:30 pm to 9:45 pm Module-3:Introduction to Vibration and Single DOF Free Un-damped Vibrations Concepts of SHM, Natural frequency, SEP, DOF, Equivalent system Methods to derive equations of motion Concept and numerical on evaluation of natural frequency of vibration for 1 dof Undamped system

07 12th

Aug 2018 Sun 5:00 pm to 9:30 pm

08 19th

Aug 2018 Sun 5:00 pm to 9:30 pm

09 26th

Aug 2018 Sun 5:00 pm to 9:30 pm Module-4:Single DOF Free Damped Vibrations Concepts of damping, types, mathematical formulation and solution of governing equations of motion Concept and numerical on Underdamped system,, Critically damped system, Overdamped system Concept and numerical on Coulomb Damping

10 02nd

Sept 2018 Sun 5:00 pm to 9:30 pm

11 06th

Sept 2018 Thu 6:30 pm to 9:45 pm

12 09th

Sept 2018 Sun 5:00 pm to 9:30 pm Module-5.1:Forced Vibration Concept & numerical on Forced Excitation and Motion Excitation

13 16th


14 23rd


15 30th

Sept 2018 Sun 5:00 pm to 9:30 pm Module-5.2:Vibration Isolation Concept & numerical on Forced Trasnsmissibility and Motion Trasnsmissibility 16 04th Oct 2018 Thu 6:30 pm to 9:45 pm

17 07th

Oct 2018 Sun 5:00 pm to 9:30 pm Module-5.3:Vibration Measurement

Concept & numerical on Vibrometer and Accelerometer

Module-6.1:Rotor Dynamics

Concept & numerical on whirling (critical) speed of shaft 18 14th

Oct 2018 Sun 5:00 pm to 9:30 pm

19 18th

Oct 2018 Thu 6:30 pm to 9:45 pm Module-6.2: Balancing Part (A): Balancing of rotating masses Concept & Numerical on balancing of rotary masses in same transverse plane and in different transverse planes Part (A): Balancing of reciprocating masses Concept & Numerical on balancing of In-line engine, V-engine

20 21st

Oct 2018 Sun 5:00 pm to 9:30 pm

21 21st

Oct 2018 Sun 5:00 pm to 9:30 pm




M: 9324604565 M: 9324604565


01 16th

July 2018 Mon 6:30 pm – 9:45 pm Module-01: Modes of heat transfer Module-02: Conduction Heat Transfer Part (A): Steady state Heat Conduction without Internal Heat Generation General 3-D heat conduction in Cartesian coordinates Concept of Steady state heat conduction through plane and composite rectangular walls Numerical on heat conduction through plane and composite rectangular walls with & without convection Concept & Numerical on Steady state heat conduction through hollow cylinder and composite cylindrical wall Concept & Numerical on Steady state heat conduction through hollow sphere and composite spherical wall

02 23rd

July 2018 Mon 6:30 pm – 9:45 pm

03 30th

July 2018 Mon 6:30 pm – 9:45 pm

04 2nd

Aug 2018 Thu 6:30 pm – 9:45 pm

05 06th

Aug 2018 Mon 6:30 pm – 9:45 pm Part (B): Critical Thickness of Insulation: Concept & Numerical

Part (C): Steady state Heat Conduction with Internal Heat Generation Heat conduction through rectangular wall with IHG Heat conduction through cylinder with IHG Heat conduction through spherical wall with IHG

06 13th

Aug 2018 Mon 6:30 pm – 9:45 pm

07 16th

Aug 2018 Thu 6:30 pm – 9:45 pm

08 20th

Aug 2018 Mon 6:30 pm – 9:45 pm Module-03(A):Heat Transfer from Extended Surfaces (Fins)

Concept, Derivations & Numerical Fins of infinite length and Fins of infinite length Fins application: Error in temperature measurement

Module-03(B)Transient Heat Transfer Lumped System analysis: Derivation & Numerical, Heisler charts: Concept & Numerical

09 27th

Aug 2018 Mon 6:30 pm – 9:45 pm

10 30th

Aug 2018 Thu 6:30 pm – 9:45 pm

11 03rd

Sept 2018 Mon 6:30 pm – 9:45 pm

12 10th

Sept 2018 Mon 6:30 pm – 9:45 pm Module-03: Convection Heat Transfer analysis

Concept of Velocity ,Temp Profile, Nusselt Number Concept, Derivation and Numerical on Forced Convection Heat Transfer Concept, Derivation and Numerical on Natural Convection Heat Transfer

13 13th

Sept 2018 Thu 6:30 pm – 9:45 pm

14 17th

Sept 2018 Mon 6:30 pm – 9:45 pm

15 24th

Sept 2018 Mon 6:30 pm – 9:45 pm

16 27th

Sept 2018 Thu 6:30 pm – 9:45 pm Module-06: Heat Exchanger Analysis Classification of HE, Derivation for Overall H.T. coefficient with fouling phenomenon, LMTD,Numerical based on LMTD

Concept of NTU and Effectiveness of Heat exchanger,Numerical based on NTU Method 17 01

st Oct 2018 Mon 6:30 pm – 9:45 pm

18 08th

Oct 2018 Mon 6:30 pm – 9:45 pm

19 11th

Oct 2018 Thu 6:30 pm – 9:45 pm Module-05: Radiation Heat Transfer Basic Laws of Radiation: Stefan-Boltzmann’s law, Planck’s law, Kirchoff’s law, Intensity of radiation Numerical based on basic laws Heat exchange between two black bodies and Concept of shape factor Numerical on Heat exchange between two grey bodies, between three bodies

Concept and Numerical on Radiation shields

20 15th

Oct 2018 Mon 6:30 pm – 9:45 pm

21 22th

Oct 2018 Mon 6:30 pm – 9:45 pm

22 29th

Oct 2018 Mon 6:30 pm – 9:45 pm

\

SEM-V: HEAT TRANSFER DADAR BATCH SCHEDULE


01 14th

July 2018 Sat 8:30 am – 1:30 pm

Module-01: Modes of heat transfer

Module-02: Conduction Heat Transfer Part (A): Steady state Heat Conduction without Internal Heat Generation General 3-D heat conduction in Cartesian coordinates Concept of Steady state heat conduction through plane and composite rectangular walls

02 21st

July 2018 Sat 8:30 am – 1:30 pm Numerical on heat conduction through plane and composite rectangular walls with & without convection

03 28th

July 2018 Sat 8:30 am – 1:30 pm Concept & Numerical on Steady state heat conduction through hollow cylinder and composite cylindrical wall Concept & Numerical on Steady state heat conduction through hollow sphere and composite spherical wall

04 04th

Aug 2018 Sat 8:30 am – 1:30 pm Part (B): Critical Thickness of Insulation: Concept & Numerical

Part (C): Steady state Heat Conduction with Internal Heat Generation Heat conduction through rectangular wall with IHG

05 11th

Aug 2018 Sat 8:30 am – 1:30 pm Heat conduction through cylinder with IHG

Heat conduction through spherical wall with IHG

06 18th

Aug 2018 Sat 8:30 am – 1:30 pm Module-03(A):Heat Transfer from Extended Surfaces (Fins)

Concept, Derivations & Numerical Fins of infinite length and Fins of infinite length Fins application: Error in temperature measurement 07 25

th Aug 2018 Sat 8:30 am – 1:30 pm

08 01st

Sept 2018 Sat 8:30 am – 1:30 pm Module-03(B)Transient Heat Transfer

Lumped System analysis: Derivation & Numerical, Heisler charts: Concept & Numerical

09 08th

Sept 2018 Sat 8:30 am – 1:30 pm Module-04: Convection Heat Transfer analysis

Concept of Velocity ,Temp Profile, Nusselt Number Concept, Derivation and Numerical on Forced Convection Heat Transfer

Concept, Derivation and Numerical on Natural Convection Heat Transfer

10 15th

Sept 2018 Sat 8:30 am – 1:30 pm

11 22nd

Sept 2018 Sat 8:30 am – 1:30 pm

12 29th

Sept 2018 Sat 8:30 am – 1:30 pm Module-06: Heat Exchanger Analysis

Classification of HE, Derivation for Overall H.T. coefficient with fouling phenomenon, LMTD,Numerical based on LMTD Concept of NTU and Effectiveness of Heat exchanger,Numerical based on NTU Method 13 06

th Oct 2018 Sat 8:30 am – 1:30 pm

14 13th

Oct 2018 Sat 8:30 am – 1:30 pm Module-05: Radiation Heat Transfer

Basic Laws of Radiation: Stefan-Boltzmann’s law, Planck’s law, Kirchoff’s law, Intensity of radiation Numerical based on basic laws Heat exchange between two black bodies and Concept of shape factor Numerical on Heat exchange between two grey bodies, between three bodies Concept and Numerical on Radiation shields

15 20th

Oct 2018 Sat 8:30 am – 1:30 pm

16 27th

Oct 2018 Sat 8:30 am – 1:30 pm

SEM-V: HEAT TRANSFER THANE BATCH SCHEDULE




M: 9324604565 M: 9324604565

Sr. No. Name of the Student College Subject Marks out of 100 1. Tinwala Adnan Saboo Siddik Dynamics of Machinery 97

2. Pragnesh Panchal KJS Dynamics of Machinery 95

3. Maaz Ansari Kalsekar Dynamics of Machinery 93

4. Suthar Manoj Vartak Dynamics of Machinery 92

5. Amol Gadakh RGIT Dynamics of Machinery 92

6. Metkari Vishwajit KGCE Dynamics of Machinery 92

7. Rachel Mendoza DBIT Dynamics of Machinery 92

8. Bhusan Mali Theem Dynamics of Machinery 91

9. Shehan Kamle DBIT Dynamics of Machinery 91

10. Abhishek Vishwakarma BVCOE Dynamics of Machinery 91

11. Deepak Bondre LTCOE Dynamics of Machinery 90

12. Patel Juhi LTCOE Dynamics of Machinery 90

13. Shambhavi Mahajan DJS Dynamics of Machinery 90

14. Ankit Singh Saboo Dynamics of Machinery 90

15. Ashutosh Sahoo SIES Dynamics of Machinery 90

16. Sachin Tiwari BVCOE Dynamics of Machinery 89

17. Tushar Punekar BVCOE Dynamics of Machinery 88

18. Parkar Srikant DMCE Dynamics of Machinery 88

19. Siddharth Ninjal VIVA Dynamics of Machinery 88

20. Narendra Sangepag Rizvi Dynamics of Machinery 88

21. Rahul Deorukhkar Vartak Heat Transfer 95

22. Salman Ansari B R Harne Heat Transfer 94

23. Shikha Bagwe Rizvi Heat Transfer 94

24. Anvi Chaudhary DBIT Heat Transfer 94

25. Suthar Manoj Vartak Heat Transfer 93

26. Aditya Jha L R Tiwari Heat Transfer 93

27. Prathmesh Kadam BVCOE Heat Transfer 93

28. Hetal Gohil Thakur Heat Transfer 92

29. Kalyani Deshmukh RGIT Heat Transfer 92

30. Yogita Kamble VIVA Heat Transfer 91

31. Niranjan Gathe MGM Heat Transfer 91

32. Ashit Agrawal SIES Heat Transfer 91

33. Bhusan Mali Theem Heat Transfer 90

34. Shreyas Dhangade LTCOE Heat Transfer 90

35. Sagar Ambre PIIT Heat Transfer 90

36. Rohan Bodke DMCE Heat Transfer 90

37. Sagar Kumbharkar KGCE Heat Transfer 89

38. Gauri Tambe BVCOE Heat Transfer 89

39. Aabdulla Shaikh Kalsekar Heat Transfer 89

40. Omkar Hankane Dilkap Heat Transfer 87

41. Jayesh Desai Thakur I C Engine 90

42. Hamza Qureshi Rizvi I C Engine 88

43. Omkar Bode SIES I C Engine 88

44. Prathmesh Kadam BVCOE I C Engine 87

SEM-V MERIT HOLDERS




M: 9324604565 M: 9324604565

SEM-VII BATCHES

R EG U LA R B A TC HE S

Subject Taken by Centre Day Time Start. Date Fees

Machine Design-II Kazi Sir Dadar Saturday

Details on pg-2 5.00 pm - 9.45 pm 14th July 2018 8000/-

CAD/CAM/CIM Kais Sir Dadar Monday 6.45 pm - 9.45 pm 16th July 2018

7000/- Thane Friday 6.45 pm - 9.45 pm 20th July 2018

P.P.C. Kais Sir Dadar Tuesday 6.45 pm - 9.45 pm 24th July 2018 7000/-



C-01 MD-II + MUS(Vac) 13000/- 12000/-

C-02 MD-II + CAD/CAM/CIM 15000/- 14000/-

C-03 MD-II + PPC 15000/- 14000/-

C-04 MD-II + MUS (Vac) + CAD/CAM/CIM 20000/- 18500/-

C-05 MD-II + MUS (Vac) + PPC 20000/- 18500/-

C-06 MD-II + MUS (Vac) + CAD/CAM/CIM + PPC 27000/- 25000/- Note: If a student take one subject initially and later on enrol for any of the Bouquet subjects, still he/she will be entitled to get benefits of corresponding ‘Bouquet Fees’.

Sr. No. Name of the Student College Subject Marks out of 100 1. Anil Salunkhe Vartak MD-II 90

2. Suraj Chanchal SS Jondhale MD-II 90

3. Manoj Patil A C Patil MD-II 88

4. Sameer Solanki Rizvi MD-II 87

5. Kapil Panchal DJ Sanghvi MUS 93

6. Anurag Palkar KGCE MUS 90

7. Rohan Nair MGM MUS 90

8. Swati Sawle S S Jondhale MUS 88

9. Sagar Shukla VIVA MUS 87

10. Abhishek Pal Rizvi PPC 95

11. Roshan Shaikh Kalsekar CAD/CAM/CIM 90

12. Rajesh Monde DBIT CAD/CAM/CIM 88


01 14th

July 2018 Sat 5:00 pm – 9:45 pm Design of Gear Drives

Design of 2-Stage Gear Box

Design of Spur Gear pair

Design of Helical Gear pair

Design of Bevel Gear pair

Design of Worm and Worm wheel pair

02 21st

July 2018 Sat 5:00 pm – 9:45 pm

03 28th

July 2018 Sat 5:00 pm – 9:45 pm

04 04th

Aug 2018 Sat 5:00 pm – 9:45 pm

05 11th

Aug 2018 Sat 5:00 pm – 9:45 pm

06 18th

Aug 2018 Sat 5:00 pm – 9:45 pm

07 25th

Aug 2018 Sat 5:00 pm – 9:45 pm Selection of Rolling Contact Bearings Design for Constant Load and Speed

Design for Cyclic Load and Speed

08 01st

Sept 2018 Sat 5:00 pm – 9:45 pm

09 08th

Sept 2018 Sat 5:00 pm – 9:45 pm

10 15th

Sept 2018 Sat 5:00 pm – 9:45 pm Design of Hydro dynamically Lubricated Bearings

Design & Performance analysis of Self-Contained bearing 11 22nd

Sept 2018 Sat 5:00 pm – 9:45 pm

12 29th

Sept 2018 Sat 5:00 pm – 9:45 pm Design of Belt Drives Design of Flat Belt Drives

Design of V-Belt Drives

13 06th

Oct 2018 Sat 5:00 pm – 9:45 pm

14 13th

Oct 2018 Sat 5:00 pm – 9:45 pm Design of Chain Drives

Selection of Power transmission Roller Chain

15 20th

Oct 2018 Sat 5:00 pm – 9:45 pm Design of Friction Clutches Design of Multiple Plate Dry and Wet Clutches

Design of Cone Clutches

16 27th

Oct 2018 Sat 5:00 pm – 9:45 pm

17 03th

Nov 2018 Sat 4:00 pm – 9:45 pm Design of Cam Drive

SEM-VII: MD-II REGULAR BATCH SCHEDULE




M: 9324604565 M: 9324604565

G A T E + P S U - 2 0 1 9 B A T C H E S C L A S S R O O M C O U R S E @ D A D A R & T H A N E

* Subjects covered in Vacation period will be taken in November for Fresh Joiner ** Extra lecture of I.M & O.R will be taken on Public Holidays

OUR BOUQUET FEES WITH GATE-2019 CLASSROOM COURSE

Contact Us for Fees Structure, Academic Merit Discount, Group Discount and Scholarships

Extensive Study Material

Separate set of notes for each subject include complete topic wise theory, topic wise class work and home work problems Separate booklet for past 25 years GATE question along with solution and explanation

Test Series

2 topic wise tests per subject (24+ tests) 2 complete subject test on each subject (24+ tests) 5 Full syllabus tests

Regular revision of crucial topics

Team of experienced faculties

Small size Batches

Tips and tricks to crack GATE

Post GATE guidance

Phase Centre Schedule Day Time Subject Total Hrs

Va

cati

on

Pe

rio

d

(Dadar or

Thane) *

For fresh joiners these subjects will

be covered in Nov-18

24th June 2018 to

12th July 2018

24th

June to

28th

June 4.00 pm – 9.30 pm Heat Transfer 25

10

8 H

rs.

29th

June

to 06

th July

09th

July

to 12

th July

4.00 pm – 9.30 pm Fluid Science 65

07th

July to 08

th July

10.00 am – 7.00 pm I.M & O.R.** 18

Re

gu

lar

Pe

rio

d

Dadar

14th July 2018 to

31st Oct 2018 (~16 weeks)

Wednesday 6.45 pm – 9.15 pm Material Sci. &

General Aptitude 40

36

8 H

rs. Thursday 6.45 pm – 10.00 pm Thermal Science & RAC 56

Saturday 10.00 am – 3.00 pm Manufacturing Science 80

4.00 pm – 9.00 pm Mechanics & S.O.M. 80

Sunday 2.00 pm – 5.30 pm Maths 56

6.00 pm – 9.30 pm T.O.M & M.D. 56

Thane

14th July 2018 to


Tuesday 6.30 pm – 10.00 pm T.O.M & M.D. 56

36

8 H

rs. Thursday 6.30 pm – 9.00 pm

Material Sci. & General Aptitude

40

Friday 6.30 pm – 10.00 pm Thermal Science & RAC 56

Saturday 6.30 am – 10.00 pm Maths 56

Sunday 11.00 am – 4.00 pm Manufacturing Science 80


Total number of Classroom Teaching Hrs 460+

Bouquet No. Subjects in Bouquet

G-01 GATE-19 + M.D.-II

G-02 GATE-19 + M.D.-II + MUS

G-03 GATE-19 + M.D.-II + MUS + CAD/CAM/CIM

G-04 GATE-19 + M.D.-II + CAD/CAM/CIM + PPC

G-05 GATE-19 + CAD/CAM/CIM + PPC

G-06 GATE-19 + MUS + CAD/CAM/CIM




M: 9324604565 M: 9324604565

G A T E + P S U - 2 0 2 0 B A T C H E S C L A S S R O O M C O U R S E @ D A D A R & T H A N E

Note: GATE 2020 Student can attend all the lecture of GATE 2019 Batch with prior intimation and thereby they can revise all the subjects in their respective phases

OUR BOUQUET WITH GATE-2020 CLASSROOM COURSE

OUR BOUQUET FEES WITH GATE-2019 CLASSROOM COURSE

Contact Us for Fees Structure, Academic Merit Discount, Group Discount and Scholarships

Extensive Study Material

Separate set of notes for each subject include complete topic wise theory, topic wise class work and home work problems Separate booklet for past 25 years GATE question along with solution and explanation

Test Series

2 topic wise tests per subject (24+ tests) 2 complete subject test on each subject (24+ tests) 5 Full syllabus tests

Regular revision of crucial topics

Team of experienced faculties

Small size Batches

Tips and tricks to crack GATE

Post GATE guidance

Phase Schedule Centre Day Time Subject Total Hrs

I

21st July 2018 to


Dadar

Wednesday (8 Weeks)

6.30 pm – 9.00 pm General Aptitude 20

76

Sunday 2.00 pm – 5.30 pm Maths 56

Thane

Thursday (8 Weeks)

6.30 pm – 9.00 pm General Aptitude 20

76

Saturday 6.30 am – 10.00 pm Maths 56

II

14th Jan 2019 to

1st Apr 2018 (~12 weeks)

Dadar Every Sunday 2 Hrs/Day (As Sem VI is crucial, focus

should be given on MU Exam)

Material Science 24 24

Thane Every Sunday

Va

cati

on

P

erio

d 17th June 2019

to 14th July 2019 (~4 weeks)

Dadar/Thane Everyday 5hrs/Day

Heat Transfer 25

12

5 Fluid Science 65

I.M. & O.R. 35

III

14th July 2019 to


Dadar

Saturday 9.30 am – 2.30 pm Manufacturing Science 80

27

2


Sunday 9.30 am – 1.00 pm Thermal Science & RAC 56

1.30 pm – 5.00 pm T.O.M & M.D. 56

Thane

Friday 6.30 pm – 10.00 pm T.O.M & M.D. 56

27

2 Saturday 6.30 pm – 10.00 pm Thermal Science & RAC 56

Sunday 9.30 am – 2.30 pm Mechanics & S.O.M. 80

3.00 pm – 8.00 pm Manufacturing Science 80

Total number of Classroom Teaching Hrs 460+


G-01 GATE-20 + DOM

G-02 GATE-20 + HT

G-03 GATE-20 + HT + DOM

G-04 GATE-20 + DOM + HT + ICE

G-05 GATE-20 + DOM + ICE

G-06 GATE-20 + HT + ICE


G-01 GATE-19 + M.D.-II

G-02 GATE-19 + M.D.-II + MUS

G-03 GATE-19 + M.D.-II + MUS + CAD/CAM/CIM

G-04 GATE-19 + M.D.-II + CAD/CAM/CIM + PPC

G-05 GATE-19 + CAD/CAM/CIM + PPC

G-06 GATE-19 + MUS + CAD/CAM/CIM

Documents

SEM-IV:FLUID MECHANICS CRASH @THANE May …kazisir.com/TimeTable/VTIMETABLE.pdfWorking principle, Parson’s reaction turbine, Derivations for maximum blade efficiency Numerical on