2
QUICK ROOF TM SELF-ADHESIVE EPDM ROOF REPAIR Part#RQR616 6 x16 6 x16 Part#WRQR616 6 x24 Part#RQR624 QUICK ROOF TM RUBBER ROOF REPAIR FOR RV’s FOR EPDM RUBBER ROOFING WITH WHITE BUTYL ADHESIVE •Easy & permanent application •Super strong Butyl adhesive •Fully cured EPDM rubber surface •Lasts for years INSTANTLY WATERPROOFS TEARS & PUNCTURES

SELF-ADHESIVE EPDM ROOF REPAIR · Before applying Quick Roof Rubber Roof Repair or Quick Roof Double White, the existing roof needs to be cleaned and any chalky material removed

  • Upload
    others

  • View
    14

  • Download
    0

Embed Size (px)

Citation preview

Page 1: SELF-ADHESIVE EPDM ROOF REPAIR · Before applying Quick Roof Rubber Roof Repair or Quick Roof Double White, the existing roof needs to be cleaned and any chalky material removed

QUICK ROOFTM

SELF-ADHESIVE EPDM ROOF REPAIR

Part#RQR6166”x16’ 6”x16’

Part#WRQR6166”x24”

Part#RQR624

QUICK ROOFTM

RUBBER ROOF REPAIR FOR

RV’s FOR EPDM RUBBER ROOFINGDOUBLE WHITE

WITH WHITEBUTYL ADHESIVE

•Easy & permanent application •Super strong Butyl adhesive

•Fully cured EPDM rubber surface•Lasts for years

INSTANTLY WATERPROOFS TEARS & PUNCTURES

Page 2: SELF-ADHESIVE EPDM ROOF REPAIR · Before applying Quick Roof Rubber Roof Repair or Quick Roof Double White, the existing roof needs to be cleaned and any chalky material removed

Made in the U.S.A.

Skokie, IL 60076Phone: 800-333-6700www.cofair.com

COFAIR PRODUCTS, INC.

COFAIRPRODUCTS, INC.

INSTRUCTIONS FOR APPLICATION OFINSTANT RUBBER ROOF REPAIR

1 2 431. Surface preparation is the key to any good

bond.2. Wipe repair area with rubbing alcohol.3. Scrub the repair area with a scrub pad using a

circular motion.4. Re-wipe repair area with alcohol using a clean

cloth.5. Allow surface to dry completely before pro-

ceeding.6. Measure the area to be repaired. Allow a mini-

mum of two inches of Quick Roof InstantRubber Roof Repair material to extend past therepair area.

7. Peel off release paper.8. Apply EPDM patch, sticky side down.9. For optimum adhesion, roll the patch material

with a small hand roller.10.For a more finished look, a good quality lap

sealant for EPDM rubber may be appliedaround the outside edge of the patch.

WARRANTY: Cofair warrants this product to be free of merchantable quality when used and/or applied in accordance with instructions hereon. Cofair does not war-rant this product for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of defectiveproduct as purchased. THE LIMITED WARRANTY IS ISSUED IN LIEU OF ALL OTHER EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE WARRANTYOF FITNESS, AND EXPRESSLY EXCLUDES LIABILITY FOR CONSEQUENTIAL DAMAGES.

INSTRUCTIONS FOR APPLICATION OFINSTANT RUBBER ROOF REPAIR

WARRANTY: Cofair warrants this product to be free of merchantable quality when used and/or applied in accordance with instructions hereon. Cofair does not war-rant this product for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of defectiveproduct as purchased. THE LIMITED WARRANTY IS ISSUED IN LIEU OF ALL OTHER EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE WARRANTYOF FITNESS, AND EXPRESSLY EXCLUDES LIABILITY FOR CONSEQUENTIAL DAMAGES.

1 2 431. Surface preparation is the key to any good

bond.2. Wipe repair area with rubbing alcohol.3. Scrub the repair area with a scrub pad using a

circular motion.4. Re-wipe repair area with alcohol using a clean

cloth.5. Allow surface to dry completely before pro-

ceeding.6. Measure the area to be repaired. Allow a mini-

mum of two inches of Quick Roof InstantRubber Roof Repair material to extend past therepair area.

7. Peel off release paper.8. Apply EPDM patch, sticky side down.9. For optimum adhesion, roll the patch material

with a small hand roller.10.For a more finished look, a good quality lap

sealant for EPDM rubber may be appliedaround the outside edge of the patch.

B

Job No: 123648Date: 9.12.12Op/Mac#: JS/PG /JLVersion: Quick Roof Label Side 2SIZE: 6.75" x 8.25"

9/12

111919_BK:QR Inst Label Back 9/12/12 7:34 AM Page 1

6”x16’ Part#WRQR616

Part#RQR6166”x16’

6”x24” Part#RQR624

1. Before applying Quick Roof Rubber Roof Repair or Quick Roof Double White, the existing roof needs to be cleaned and any chalky material removed.

2. Dampen a sponge or scrub pad with Quick Roof UltraClean, rubbing alcohol, or any non-residue-forming rubber roof cleaner.

3. For maximum adhesion, use Quick Roof UltraBond Spray Prime, or an EPDM Primer Wash prior to application.

4. Allow surface to dry completely before proceeding.

5. Measure the area to be repaired. Allow a minimum of two inches of repair material to extend beyond the repair area.

6. Remove release paper and apply the Rubber Roof Repair material.

7. For optimum adhesion, roll the repair material with a small hand roller.

8. For a more finished look, a good quality lap sealant for EPDM rubber may be applied around the outside edge of the patch.

LIMITED WARRANTY: Cofair warrants this product to be of merchantable quality when used and/or applied in accordance with instructions hereon. Cofair does not warrant this product for any other pur-pose or use other than for the general purpose for which it was intended. Liability under this warranty is limited to the replacement of defective product as purchased. THIS LIMITED WARRANTY IS ISSUED IN LIEU OF ALL OTHER EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF FITNESS, AND EXPRESSLY EXCLUDES LIABILITY FOR CONSEQUENTIAL DAMAGES.

INSTRUCTIONS FOR THE APPLICATION OF QUICK ROOF RUBBER ROOF REPAIR and

QUICK ROOF DOUBLE WHITE FOR EPDM RUBBER ROOFING