Timer and monitoring relays
Selectron timer relais
From simple to multifunctional timerrelays with external
potentiometer and potential-free control contact
Supply by internal and external voltage
Housing shapes for control, systems and general engineering as
well as foruse in building installation technology
Variants for the DIN-rail, switch panel installation as well as
with 11-poles plug in socket
Continuous supply ranges for all application ranges
—
—
—
—
—
FunctionsDelay on
Delay off
Pulse extension
Wiping on a trailing edge
Pulse limitation
Cycling timer
Cycling timer relay
Delay on and delay off
Pulse detection
Delay off without auxiliary voltage
Star-delta-relay
etc.
•
•
•
•
•
•
•
•
•
•
•
•
Selectron monitoring relays
Measurement parameters such as voltage, current, temperature and
fi ll level in simple or multifunctional confi guration
Supply by measurement voltage or external voltage
Monitoring of commonly used supply systems with 230/400 VAC or
240/415 VAC
Variants for the DIN-rail, switch panel in-stallation as well as
with 11-poles plug in socket
—
—
—
—
Functions andmeasurement ranges
1-phase current monitoring
1-phase DC voltage monitoring
1-phase AC voltage monitoring
3-phase AC voltage monitoring
Temperature monitoring
Load monitor
10 mA to 10 A AC/DC
1.5 VAC/DC to 300 AC/DC or 560 VAC
Up to 6 PTCs according to DIN 44081
10 ... 400 Hz
CosPhi 0.1 to 1.0
•
•
•
•
•
•
•
•
•
•
•
„The innovation in form,size and function“
Selectron Systems AGBernstrasse 70CH-3250 Lyss
Tel.: +41 32 387 61 61 Fax: +41 32 387 61
[email protected]
05.2012 / 43930676 Subject to technical changes and amendments
to technical specifi cations at any time
Selectron solid-state relays
Switching without wear or noise
Temperature control in industrial heating technology
Control of motors, industrial and street lighting systems
Long service lives, powerful currents
Fast switching
Printed circuit board mount, standard panel mount or DIN rail
mount with or without integrated heat sink
—
—
—
—
—
—
Specifi cationsLoad current range: 5 mA to 125 A AC 5 mA to 40 A
DC
Load voltage range: 12 ... 600 VAC 5 ... 110 VDC
Control voltage range: 3 ... 265 VAC/DC
Structural widths: 10.2 to 82.7 mm
Operating -55 °C to +100 °Ctemperatures:
•
•
•
•
•
Solid-state relays
/ColorImageDict > /JPEG2000ColorACSImageDict >
/JPEG2000ColorImageDict > /AntiAliasGrayImages false
/CropGrayImages true /GrayImageMinResolution 300
/GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true
/GrayImageDownsampleType /Bicubic /GrayImageResolution 300
/GrayImageDepth -1 /GrayImageMinDownsampleDepth 2
/GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true
/GrayImageFilter /DCTEncode /AutoFilterGrayImages true
/GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict >
/GrayImageDict > /JPEG2000GrayACSImageDict >
/JPEG2000GrayImageDict > /AntiAliasMonoImages false
/CropMonoImages true /MonoImageMinResolution 1200
/MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true
/MonoImageDownsampleType /Bicubic /MonoImageResolution 1200
/MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000
/EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode
/MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None
] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false
/PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000
0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true
/PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ]
/PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier ()
/PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped
/False
/Description > /Namespace [ (Adobe) (Common) (1.0) ]
/OtherNamespaces [ > /FormElements false /GenerateStructure
false /IncludeBookmarks false /IncludeHyperlinks false
/IncludeInteractive false /IncludeLayers false /IncludeProfiles
false /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe)
(CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector
/DocumentCMYK /PreserveEditing true /UntaggedCMYKHandling
/LeaveUntagged /UntaggedRGBHandling /UseDocumentProfile
/UseDocumentBleed false >> ]>> setdistillerparams>
setpagedevice
