740 SELECT™ Series Vital Signs Monitor

Work� ow and Time Management • Enter Patient IDN manually or by optional barcode reader • Snapshot feature for capturing and storing physiologic measurements• Stand-by mode for enhanced bedside patient workfl ow and alarms management• Easily confi gured for spot-check, triage or continuous monitoring• Auto-Dim display, auto brighten on alarm or with touch of the screen• Rechargeable Li-ion battery for portability and extended mobile operation• Automatic capture of patient trend data

• 5184 records, 72 hours of 1-minute intervals (4320 records), plus 72 hours of NIBP measurements at 5-minute intervals (864 records)

• EMR connectivity via Serial output using third party device integrators • Trends review of physiologic measurements• SpO2 Alarm Acknowledge button for management of sensor-off patient workfl ow• Pleth waveform display (with SpO2 option)

Patient Safety, Alarms and Audio Controls • Screen password protection (screen lock) for enhanced patient safety• Barcode Reader for positive patient identifi cation• Alarm Silence and Alarm Pause• Hi/Low Alarm limits for NIBP, SpO2, Pulse Rate and Temperature• Clinician review and confi rm saved snapshot to ensure accuracy of patient-measured

values• Secondary audio alert if an alarm persists beyond specifi ed time• Battery icon with relative capacity and battery charge level alarms• Audio alert and visual indicators for physiologic and technical alarms• U.S.A. Power cord: LED light plug to confi rm connection to power. NEMA 5-15P Green DOT

plug. Auto-Locking mechanism for a secured connection to the power supply.

User Level Setup ScreensAudio

• Alarm Volume, Pulse Tone Volume and Screen Touch ClickPrinter

• Print on Save, Print on Alarm• Recording Time/Recording Delay

Patient Information • Name (First, Last), Date of Birth• Patient Type (Adult, Pediatric, Neonatal)• Height, Weight, Gender

Administrator Setup Screens (global alarms, settings, defaults, service)Alarms

• Alarm Silence Time, Alarm Pause Time, Second Speaker Time, SpO2 Alarm Delay, PR Alarm Delay

System• Serial Port (printer or communications)• Height (inches/cm), Weight (lbs/kg), Temperature Units (°F /°C)• Set Date and Time, Save User Defaults, Show Event Log

Service• NIBP Cal. Check Mode• Alarm Out Relay (Nurse Call)• Language Selection• Copy Settings to USB and from USB • Copy Logs to USB (troubleshooting)• Printer Diagnostics• Restore Factory Defaults

• Cost Effective Flexible Care Solution • Intuitive User Interface and Navigation •• Spot-Check, Triage, or Continuous Monitoring of Basic Vital Signs • Simplified Clinical Workflow Options •

• Quick and Easy Vitals Data Capture Using Snapshot • Compact, Rugged Design, Easily Transported • • Built with Patient Safety in Mind •

44 East Industrial Road, Branford, CT 06405 USA800.227.4414 | www.casmed.com

21-05-0241 Rev00

ISO 13485Certifi cate Number FM 72259

Marked

Dealer Imprint

Mounting Solutions 75mm VESA adapter plate, roll stand with power supply holster and power cable management, IV pole, bedrail, wall, table top, swivel mount for EMS vehicles

Optional Thermal Printer (external)The 740SELECT thermal printer is powered directly from the monitor

• 50mm strip chart, Pleth waveform, trends, snapshot • Printer mounting solutions for: roll stand, IV pole, wall channel

740SELECT Barcode Reader• Out of box plug and play, Hospital grade, fl expoint® HS-1M • Capable of linear (1D) and matrix (2D) barcodes• Holster docking accessories for attachment to roll stand or IV pole

Size, Weight, Portability• Height x Width x Depth (with temperature option)• 7.63 x 11 x 5.75 inches (19.37 x 27.94 x 14.61 cm)• Portable and lightweight design: 4.7 lbs/2 kg (with battery)• Sturdy functional handle for portability, ease of carrying and transport

Durability• Designed and built for tough clinical use

The 740SELECT was tested and complied with the more rigorous standards called out in ISO 80601-2-61:2011 (Shock & Vibration Testing for Professional Transport).

• Shock Testing – Peak Acceleration

• Random Vibration Testing

• Free Fall Testing: The 740SELECT additionally complies with the Free Fall testing requirement of ISO 80601-2-61:2011 (Shock and Vibration Testing for Professional Transport).

Hospital Biomed• Monitor software updates are quick and easy via USB port • Field replaceable temperature module• Monitor profi le transfer via USB (monitor to monitor – defaults, alarms, settings)• Password protected Alarms, Service and Administration screens• Rechargeable Li-ion Battery Pack (10.8V, 7800mAh) with easy access for

bio-med replacement• Comprehensive error messaging and error log for troubleshooting• External 15v power supply• Passive cooling (no fans) • Alarm output to nurse call systems• Serial port for EMR connectivity (CASMED ATE Protocol)• Monitor ID Tag entry for asset tracking• Confi guration Setup (Displays installed modules, unit software version,

model and unit serial number)

Typical Ratings Ratings Achieved

Standard Testing(150 m/s2) (15 G)

Professional Transport(300 m/s2) (30 G)

Typical Ratings Ratings Achieved

Standard Testing10 Hz – 100 Hz: 1.0 (m/s2)2/Hz

100 Hz- 200 Hz: -3 dB per octave200 Hz- 2,000 Hz 0.5 (m/s2)2/Hz

Professional Transport10 Hz – 100 Hz: 5.0 (m/s2)2/Hz

100 Hz- 200 Hz: -7 dB per octave200 Hz- 2,000 Hz 1.0 (m/s2)2/Hz

Ratings Achieved

Professional Transport, (12) 10 cm drops on 6 surfaces

The 740SELECT™ provides an extraordinary selection of standard features that empower the clinician with a high degree of performance, � exibility and customization to address multiple hospital work� ows, enhance patient safety and quickly respond to demanding clinical requirements.

Intelligent Monitoring De� ned

740SELECT™

Product is

CASMED’s 740S E L E C T™ Series Vital Signs Monitor de� nes intelligent monitoring, providing � exible solutions and high-end performance in a simple yet highly sophisticated platform.

Adapting the 740S E L E C T to the immediate need of your patient is easy thanks to advanced work � ow and alarm management for spot-checking, triage or continuous monitoring.

Timely and accurate collection of patient physio-logic measurements is accomplished using world class vital signs technologies (CASMED MAXNIBP®, Covidien™ FILAC 3000 Temperature, and Masimo® SET or Nellcor OxiMax SpO2).

When increased vigilance is required, the 740S E L E C T

supports continuous SpO2 and PR monitoring with high and low alarms, plethysmograph waveform, automatic non-invasive blood pressure measure-ments (STAT and Timed Interval), automatic trends capture and printing on alarm. Recent physiologic, and equipment alarms, as well as alarm limit chang-es can be recalled using the easy access 740S E L E C T

Alarm Log.

Work� ow features such as Standby Mode, Barcode Reader, SpO2 Alarms Acknowledge, Screen Lock and Secondary Audio Alerts are provided to com-plement hospital care management and patient safety protocols.

Intelligent Monitoring De� ned

Patient Selection For Adult, Pediatric and Neonatal Patients

Patient IDNOptional 740SELECT Barcode Reader or keyboard entryPlethysmograph

With all SpO2 models

Alarm Log • For review of recent alarm limit setting

changes, patient and equipment alarms. • 400 entries on average• Touch message area to open

Message Area Dedicated area for display of:

• Patient alarms• Status messages• Equipment message

Illuminated ON/OFF LED and Battery Charging LED

Monitor ID Tag For asset tracking/unique identi� cation

Battery Status IndicatorLi-ion battery provides a 12-hour run time

Sturdy Functional Handle For portability and transport

Screen Lock/Status For enhanced patent safety when needed

Main MenuFixed touch keys for quick access to main functions

Choice of SpO2• Masimo® SET® or Covidien™

Nellcor™ OxiMax™• SpO2 signal strength

indicator bar• Hi/Lo Alarm Limits• Nellcor: Response Mode,

Sat Seconds™• Masimo®: SIQ, Perfusion Index,

FastSat®, Averaging Time, Sensitivity

Pulse Rate• Pulse Blip, Pulse Tone• Hi/Lo Alarm Limits

Covidien™ FILAC 3000 Predictive Temperature

• Quick Mode: Oral temperature in less than 4 seconds,

• Standard Mode: Oral temperature in less than 6 seconds

• Measurement site: Oral, axillary or rectal

• Time Last measurement• Hi/Lo Alarm Limits

Non-Invasive Blood Pressure CASMED MAXNIBP® Algorithm for fast, accurate and reliable readings in challenging environments

• Oscillometric step-de� ation• Manual, Auto (Interval) or Stat NIBP measurement• Systolic, Diastolic, MAP and Pulse Pressure• Adaptive NIBP measurement• Last NIBP measurement time • Hi/Lo Alarm Limits• Start BP Options for spot/triage or continuous

monitoring work� ow

MAXIQ™ Signal Quality Status Indicator (SQS)• Visual indicators provide an assessment of the signal

quality and level of motion artifact present during the NIBP measurement.

Excellent signal quality, low artifact present

Good signal quality, moderate artifact present

Poor signal quality, excessive artifact present

Monitor Features and Capabilities

Touchscreen Display for controlling and con� guring the monitor

• 7” Color TFT-LCD display, wide viewing angle, anti-glare coating

• Large and easy to read numerics• One-touch access to parameter alarms,

settings and Setup Menu• Numeric Update every second • Auto Dim (Night Mode)• Readily operated by a gloved � nger

Monitors Model Description

01-02-1000 740SELECT -1 MAXNIBP® Non-Invasive Blood Pressure

01-02-1001 740SELECT -2MS MAXNIBP® Non-Invasive Blood Pressure Masimo® Rainbow SET SpO2

01-02-1002 740SELECT -2NL MAXNIBP® Non-Invasive Blood Pressure Covidien™ Nellcor OxiMax SpO2

01-02-1003 740SELECT -3MS MAXNIBP® Non-Invasive Blood Pressure Masimo® Rainbow SET SpO2

Covidien™ FILAC 3000 Predictive Temperature

01-02-1004 740SELECT -3NL MAXNIBP® Non-Invasive Blood Pressure Covidien™ Nellcor OxiMax SpO2

Covidien™ FILAC 3000 Predictive Temperature

Intelligent Monitoring Defined

740SELECT™

740 SELECT™ Series Vital Signs Monitor

Work� ow and Time Management • Enter Patient IDN manually or by optional barcode reader • Snapshot feature for capturing and storing physiologic measurements• Stand-by mode for enhanced bedside patient workfl ow and alarms management• Easily confi gured for spot-check, triage or continuous monitoring• Auto-Dim display, auto brighten on alarm or with touch of the screen• Rechargeable Li-ion battery for portability and extended mobile operation• Automatic capture of patient trend data

• 5184 records, 72 hours of 1-minute intervals (4320 records), plus 72 hours of NIBP measurements at 5-minute intervals (864 records)

• EMR connectivity via Serial output using third party device integrators • Trends review of physiologic measurements• SpO2 Alarm Acknowledge button for management of sensor-off patient workfl ow• Pleth waveform display (with SpO2 option)

Patient Safety, Alarms and Audio Controls • Screen password protection (screen lock) for enhanced patient safety• Barcode Reader for positive patient identifi cation• Alarm Silence and Alarm Pause• Hi/Low Alarm limits for NIBP, SpO2, Pulse Rate and Temperature• Clinician review and confi rm saved snapshot to ensure accuracy of patient-measured

values• Secondary audio alert if an alarm persists beyond specifi ed time• Battery icon with relative capacity and battery charge level alarms• Audio alert and visual indicators for physiologic and technical alarms• U.S.A. Power cord: LED light plug to confi rm connection to power. NEMA 5-15P Green DOT

plug. Auto-Locking mechanism for a secured connection to the power supply.

User Level Setup ScreensAudio

• Alarm Volume, Pulse Tone Volume and Screen Touch ClickPrinter

• Print on Save, Print on Alarm• Recording Time/Recording Delay

Patient Information • Name (First, Last), Date of Birth• Patient Type (Adult, Pediatric, Neonatal)• Height, Weight, Gender

Administrator Setup Screens (global alarms, settings, defaults, service)Alarms

• Alarm Silence Time, Alarm Pause Time, Second Speaker Time, SpO2 Alarm Delay, PR Alarm Delay

System• Serial Port (printer or communications)• Height (inches/cm), Weight (lbs/kg), Temperature Units (°F /°C)• Set Date and Time, Save User Defaults, Show Event Log

Service• NIBP Cal. Check Mode• Alarm Out Relay (Nurse Call)• Language Selection• Copy Settings to USB and from USB • Copy Logs to USB (troubleshooting)• Printer Diagnostics• Restore Factory Defaults

• Cost Effective Flexible Care Solution • Intuitive User Interface and Navigation •• Spot-Check, Triage, or Continuous Monitoring of Basic Vital Signs • Simplified Clinical Workflow Options •

• Quick and Easy Vitals Data Capture Using Snapshot • Compact, Rugged Design, Easily Transported • • Built with Patient Safety in Mind •

44 East Industrial Road, Branford, CT 06405 USA800.227.4414 | www.casmed.com

21-05-0241 Rev00

ISO 13485Certifi cate Number FM 72259

Marked

Dealer Imprint

Mounting Solutions 75mm VESA adapter plate, roll stand with power supply holster and power cable management, IV pole, bedrail, wall, table top, swivel mount for EMS vehicles

Optional Thermal Printer (external)The 740SELECT thermal printer is powered directly from the monitor

• 50mm strip chart, Pleth waveform, trends, snapshot • Printer mounting solutions for: roll stand, IV pole, wall channel

740SELECT Barcode Reader• Out of box plug and play, Hospital grade, fl expoint® HS-1M • Capable of linear (1D) and matrix (2D) barcodes• Holster docking accessories for attachment to roll stand or IV pole

Size, Weight, Portability• Height x Width x Depth (with temperature option)• 7.63 x 11 x 5.75 inches (19.37 x 27.94 x 14.61 cm)• Portable and lightweight design: 4.7 lbs/2 kg (with battery)• Sturdy functional handle for portability, ease of carrying and transport

Durability• Designed and built for tough clinical use

The 740SELECT was tested and complied with the more rigorous standards called out in ISO 80601-2-61:2011 (Shock & Vibration Testing for Professional Transport).

• Shock Testing – Peak Acceleration

• Random Vibration Testing

• Free Fall Testing: The 740SELECT additionally complies with the Free Fall testing requirement of ISO 80601-2-61:2011 (Shock and Vibration Testing for Professional Transport).

Hospital Biomed• Monitor software updates are quick and easy via USB port • Field replaceable temperature module• Monitor profi le transfer via USB (monitor to monitor – defaults, alarms, settings)• Password protected Alarms, Service and Administration screens• Rechargeable Li-ion Battery Pack (10.8V, 7800mAh) with easy access for

bio-med replacement• Comprehensive error messaging and error log for troubleshooting• External 15v power supply• Passive cooling (no fans) • Alarm output to nurse call systems• Serial port for EMR connectivity (CASMED ATE Protocol)• Monitor ID Tag entry for asset tracking• Confi guration Setup (Displays installed modules, unit software version,

model and unit serial number)

Typical Ratings Ratings Achieved

Standard Testing(150 m/s2) (15 G)

Professional Transport(300 m/s2) (30 G)

Typical Ratings Ratings Achieved

Standard Testing10 Hz – 100 Hz: 1.0 (m/s2)2/Hz

100 Hz- 200 Hz: -3 dB per octave200 Hz- 2,000 Hz 0.5 (m/s2)2/Hz

Professional Transport10 Hz – 100 Hz: 5.0 (m/s2)2/Hz

100 Hz- 200 Hz: -7 dB per octave200 Hz- 2,000 Hz 1.0 (m/s2)2/Hz

Ratings Achieved

Professional Transport, (12) 10 cm drops on 6 surfaces

The 740SELECT™ provides an extraordinary selection of standard features that empower the clinician with a high degree of performance, � exibility and customization to address multiple hospital work� ows, enhance patient safety and quickly respond to demanding clinical requirements.

Intelligent Monitoring De� ned

740SELECT™

Product is