100%

NOT GREATER THAN

NON PRIMARYMATERIALS

8.3 Kg87.3 Kg

70%

ANCHOR® LANDMARKSEGMENTAL RETAINING WALL PRODUCT INFO

Portrait orientated units of slightly varying depths with a naturally textured appearance

Sustainability DataENERGY USE: 100% renewable

WATER USED: 100% rain water harvesting

RECYCLABLE: 100% of this product can be recycled

MANUFACTURING Produced in the UK from LOCATION: locally sourced materials

NON-PRIMARY: Not greater than 70% non primary materials

WASTE WOOD & PLASTIC: 100% recycled

CARBON FOOTPRINT: 87.3 Kg CO2 / m2

CARBON REDUCTION: 8.3 Kg CO2 / m2

BREEAM #: ‘A’ Rating - in accordance with the BRE Green Guide to Specification.

# Building Research Establishment’s Environmental Assessment Method.

Other colours made to order - please ask for more information.

COLOURS: All colours made to order (minimum quantity required).

Basalt Cashel Canelletto

Features & Benefits° Portrait orientated ‘riven stone’ face of slightly varying depths.

° Built with no mortar or concrete, the unique dry-build locking system allows fast-trackconstruction in all weathers - that means quicker installation rates than traditionalbrick and blockwork.

° The unique mechanical connection between the Anchor Landmark blocks, PVClocking bar and the geogrid reinforcement permits extremely high loading conditions;Anchor Landmark is therefore suitable for all retaining wall applications fromlandscape to heavy engineering.

° Generally, the Anchor Landmark system is used for tall engineered walls and is BBAcertified up to 10m (although structures exceeding this height have been designedand constructed).

° Can be built to any retained height and is suitable for any application.

° Attractive, durable and versatile.

° The capping block is shaped asymmetrically (tapered), making capping straight orcurved walls much easier. Installation of the capping block will be easier and quicker asthe shape of the capping piece minimises the need for cuts.

PROFILES:FULL HEIGHT BLOCK TAPERED FULL BLOCK HALF HEIGHT BLOCK FOUNDATION BLOCK SHORTCUTTM CAP LOCK BAR

Extruded PVC (L 1000mm)

ANCHOR® LANDMARKSEGMENTAL RETAINING WALL TECHNICAL INFO

Frost ResistantT: 028 8778 8112 | www.ag.uk.com

PRODUCT DATA:product / blocks size in colours m2 per units unit weight packs per packs per

length x depth x height (mm) stock available pack per pack weight per pack 8 wheeler unit lorry

Landmark Full Height Block L 200 x D 300 / 320(1) x H 380 MTO Basalt / Cashel / Canelletto 3.41 45 39 Kg 1.85 t 10 IRE 14 / GB 15

Landmark Tapered Full Block L 200 x D 300 / 320(1) x H 380 MTO Basalt / Cashel / Canelletto 3.41 45 39 Kg 1.75 t 10 IRE 14 / GB 15

Landmark Half Height Block L 190 x D 300 / 310(1) x H 200 MTO Basalt / Cashel / Canelletto 1.37 36 23 Kg 0.828 t 14 IRE 22 / GB 24

Landmark Foundation Block L 190 x D 300 x H 200 MTO Basalt / Cashel / Canelletto N/A 48 22 Kg 1.06 t 10 IRE 16 / GB 22

ShortCut Cap L 200(2) x D 330 x H 75 Yes Basalt / Cashel / Canelletto N/A 120 10.3 Kg 1.236 t 10 14 / 21

MTO - All Landmark colours are made to order (minimum quantity required)(1) To give the staggered appearance Anchor Landmark has two different sized blocks. The depth at top and bottom of block varies due to the inclined split face.(2) The ShortCut Cap short side is L 175mm.

INSTALLATION DATA:blocks set back / face angle minimum inside radius minimum outside radius tolerances on compressive face face no. per

(to back of block on bottom course) (to back of block on top course) all dimensions strength (3) finish geomerty m2 / lm

Full Height 25mm (3.8º) 2.10m 2.45m ±2mm 30 N/mm2 straight cut soldier 13.2

Tapered Full 25mm (3.8º) 2.10m 2.45m ±2mm 30 N/mm2 straight cut soldier 13.2

Half Height 12mm (3.8º) 2.10m 2.45m ±2mm 30 N/mm2 straight cut soldier 26.3

Foundation N/A N/A N/A ±2mm 30 N/mm2 straight cut soldier 0.019

ShortCut Cap N/A N/A N/A ±2mm N/A straight split stretcher 5.4

(3) Compressive strength determined by a 150mm cube from a block.

MANUFACTURE: Anchor® segmental retaining wall blocks aremanufactured from locally sourced, high gradeaggregates. Using the latest computerized mixingsystems ensures colour and strength consistency.

The weathered finish and slightly varying depths ofthe Landmark range is due to the most moderncomputer-controlled manufacturing process.

PLANT OF MANUFACTURE (POM):Made at our Fivemiletown Production Plant.

STANDARDS & PERFORMANCE: Our segmental retaining wall products areregularly tested to record important physicalcharacteristics and to comply with productspecific performance criteria. The durability andperformance of Anchor blocks is assured bymeeting or exceeding targets for crushingstrength and water absorption.

If you need further assistance in this respectplease consult our Technical Dept.

GRAVITY / ENGINEERED:Gravity (max 1.2m)Engineered (above 1.2)

LICENCE:Anchor blocks are manufactured under licence fromAnchor Wall Systems Inc.

CERTIFICATION:

BBA: Landmark Wall System is BBARoads & Bridges certified for usein conjunction with Enkagrid PROgeogrids. Agrement CerticicationNo. 04/R138.

ISO 14001: Environmental Management.

OSHAS 18001: Occupational Health and SafetyManagement.

CE Marking: Download our Declaration ofPerformance (DOP) data at:

www.acheson-glover.com/cemarking

SPECIFICATION REFERENCE:

NBS PLUS: 45-25-66/320 Precast concreteinterlocking blocks

D41 Crib walls, gabions and othergravity retaining walls - 310DRYSTACK INTERLOCKINGMASONRY

NOTES: Adhesive is required for fixing caps and partial units.

Walls greater than 1.2m in height should be designed by asuitably qualified engineer.

All products are manufactured from natural materials andalthough we strive to provide consistency of colour, variation mayoccur in the manufacturing process. It is for this reason that werecommend that products are selected from at least three bales,within each delivery. This will eliminate 'banding'.

As these products contain cement they may suffer from thetemporary phenomenon of efflorescence. This is in no waydetrimental to their performance characteristics and is commonin all good quality products with a high cement content. Timeshould be given for all products to weather in, at this stage theywill look their best.