Upload
1-1
View
415
Download
35
Tags:
Embed Size (px)
DESCRIPTION
catalogue generale in 2012
Citation preview
1
INDEX
8.
35.34.
28.
30.29.
9.
32.
36.37.
39.
42.44.45.46.
40.KIT OF PROTECTION
38.
64. DOOR VIEWERS
63. CYLINDER KIT 26
62. SPARE PARTS: HEARTS FOR UNIVERSAL LOCKS LINE 25
58.53.52.50.
41.DOUBLE WARD PROTECTOR
48.
6. DOUBLE WARD TIGHT LOCKS FOR METAL DOORS
7. CYLINDER EXTENSION LOCKS FOR METAL DOORS
12. SAFE LOCKS 6/8 LEVERS
15. ELECTRONIC SAFE LOCKS
15. ACCESSORIES AND SPARE PARTS FOR SAFES
16. SAFETY DOOR LOCKS LINE 25
20. SAFETY DOOR LOCKS LINE 25M
22. SAFETY DOOR LOCKS LINE 26
24. REINFORCED TOTAL LOCKS
26. SAFETY DOORS LOCKS LINE 27 RESTYLING
27. SPARE PARTS AND ACCESSORIES FOR LINE 27 RESTYLING
2.4.
11. LITTLE SAFES AND SECURITY CABINET FOR GUNS
10.
GENERAL SALE TERMS / LEGEND
MORTICE LOCKS
DOUBLE WARD LOCKS FOR ROLLING SHUTTERS AND BALANCING DOORS
CYLINDER LOCKS FOR ROLLING SHUTTERS AND BALANCING DOORS
DOUBLE WARD TYPE LOCKS TO APPLY
CYLINDERS LINE KY
CYLINDERS LINE K1
CYLINDERS LINE K2
CYLINDERS LINE K3
SITE CYLINDERS
CYLINDERS: SPARE PARTS
PROTECTOR BLINDO LINE T
KIT LINE T OF PROTECTION
PROTECTOR FORTEZZA
PROTECTOR OVAL LINE O
ESCUTCHEONS LINE T
ESCUTCHEONS LINE O
ESCUTCHEONS
KITS FOR SAFETY DOORS
ACCESSORIES KIT
SWITCHES
LIMITING DEVICES
ACCESSORIES
KEYS
GENERAL SALES TERMS
3
SALE TERMS WORLDWIDE MARKET
1 ORDERS All orders are subjected to Securemme s.r.l. finalconfirmation.
2 PACKAGING Packaging charges are included in price.Any special packaging will be charged to the customer.Packaging unit are not divisible.
3 DELIVERY Delivery dates are indicative. No compensation willbe paid if lack of part or of all the goods should occur.
4 TERM OF DELIVERY Goods are delivered EX WORKS our factory.
5 TRANSPORT Goods always travel at the risk of the customereven if shipped carriage-free.
6 INVOICING For export deliveries the minimum amount per invoiceis Euro 1.500,00. For lower amounts, Euro 25,00 will be chargedas contribute for order management.
7 COMPLAINTS No returns of goods will be accepted when theconsignment complies with the order.Any complaints must be communicated in writing within 10 daysof receipt of goods. No returns or replacements of accessoriesor components of any product will be accepted without priorauthorisation.
8 GUARANTEE Products manufactured by Securemme Srl areguaranteed for 2 years from invoice date against design, materialor manufacture defects which can be reported to Securemme Srl
and under the condition of their normal use and installation.The guarantee is valid only for material which has been supplied,excluding any recognition of charges for labour or anything elsenecessary for disassembly and re-assembly of a product held tobe defective. Defects control is uniquely up to Securemme Srlstaff.Securemme Srl will not be held responsible for guaranteeconditions in the case that SECUREMME ORIGINALACCESSORIES AND SPARE PARTS (for example keys) won’tbe used or if the product has been modified, repaired or alteredby unauthorised people. In no case will Securemme Srl be heldresponsible for any damage which is a consequence of theunsuitability of the product for its type of use. In particular,Securemme Srl is not held to guarantee:- that the product cannot be manipulated or damaged byill-intentioned people;- that the product is able to prevent damage to things and peopleduring burglaries, hold-ups or other criminal acts.Consequently Securemme Srl will not be subject to anyresponsibility, either civil or penal, in the case of damage tothings or people which are questionable on the basis of theinefficacy of the product supplied. Securemme Srl will not beheld responsible for guarantee conditions in the case that thebuyer doesn’t respect the payment terms agreed.
9 PRICE REVISION CLAUSE The prices in the present price-listmay be revised on the delivery of goods due to variations in thecost of parts which have taken place in the meantime.Prices are in EURO. The measures are in mm.
SECUREMME Srl reserves the right to vary product dimensions, characteristics and finishes at any time and without prior notice. All technical drawingsand all pictures belong to SECUREMME Srl, any copy, even if only partial is strictly forbidden complying with the law. SECUREMME is a registeredcompany name and trademark.
BK = BlackBR = BronzedCR = ChromoNK = NickelOT = BrassZB = Galvanized whiteZT = Galvanized yellowF1 = Silver aluminiumF3 = Gold aluminium
F4 = Bronzed aluminiumF5 = Black aluminiumF9 = Aluminium titaniumOL = Polish brassPV = PVD brassOS = Satin brassCL = Chromium shinyCS = Chromium satin
LEGEND
2000XZB40XXAB32000XZB50XXAB32000XZB60XXAB32000XZB70XXAB3
4
DOUBLE WARD MORTICE LOCKS
High security double ward locks for frames and gates. Lateral and triple closings.
2010UZB70XXAB32010UZB90XXAB3
2008UZB70XXAB32008UZB90XXAB3
2013XZB50XXAB22013XZB60XXAB22013XZB70XXAB2
2011XZB50XXAB22011XZB60XXAB22011XZB70XXAB2
2003XZB50XXAB22003XZB55XXAB22003XZB60XXAB22003XZB70XXAB2
2001XZB50XXAB22001XZB60XXAB22001XZB70XXAB2
20202020
1515
1515
151515
151515
15151515
151515
XX
XX
MODEL
2001
Mortice locks
SUPPLY: 1 striking plate CP2001XZB e 2 escutcheons 4501XZB
SUPPLY: 1 striking plate CP2001XZB e 2 escutcheons 4501XZB
|CODING EXAMPLE
HANDX=
bolt only, no latchU=
universal withreversible latch
X
FINISHINGZB=
galvanized whiteOT=
brassedCR=
chromo
ZB
KEY ENTRANCE404550607090
50
KIND OF LOCKA=
double ward 6 gorgeswith reversible key
A
KEY MODELB= 0CVBXNISBOZC= 0CVCXNISBOZ
B
B=68 C=78
N. KEYS
2
2= |2 keys3= |3 keys5= |5 keys
Code
40506070
7090
7090
506070
506070
50606070
506070
Entrance
2444
44
44
244
244
2244
244
Turns
20404040
4040
40+1640+16
20+2040+2040+20
204040
20204040
204040
Stroke
SUPPLY: 1 striking plate CP2001XZB e 2 escutcheons 4501XZB
SUPPLY: 1 striking plate CP2001XZB e 2 escutcheons 4501XZB
SUPPLY: 2 escutcheons 4501XZB
SUPPLY: 2 escutcheons 4501XZB
SUPPLY: 1 striking plate CP2000XZB e 2 escutcheons 4921KF3
1111
11
33
333
111
3333
111
Closing
2024XCR40XXAB52025XOT40XXAB32025XOT40XXAB52025XCR40XXAB32025XCR40XXAB5
2024 =2025 =
5
2020XOT60XXAB32020XOT60XXAB52020XCR60XXAB32020XCR60XXAB5
SUPPLY: 1 striking plate CP2020XOT/CP2020XCR e 2 escutcheons 4921KF3/4921KF1
2022UZB60XXAC5
SUPPLY: 1 striking plate CP2017XZB e 2 escutcheons 4921KF1
2021UZB60XXAC5
SUPPLY: 1 striking plate CP2017XZB e 2 escutcheons 4921KF1
2018UZB45XXAC5
SUPPLY: 1 striking plate CP2017XZB e 2 escutcheons 4921KF1
2017UOT45XXAC5
SUPPLY: 1 striking plate CP2017XZB e 2 escutcheons 4921KF1
2028XCR50XXAB52028XOT50XXAB5
SUPPLY: 1 striking plate CP2025XOT/CP2020XCR e 2 escutcheons 4921KF3/4921KF1
2029XCR60XXAC32029XCR60XXAC5
SUPPLY: 2 escutcheons 4521KF1
| frontal and striking plate length 180 mm
| frontal and striking plate length 240 mm
DOUBLE WARD MORTICE LOCKS
Code
4040404040
60606060
60
60
45
45
5050
6060
Entrance
4
22222
4444
4
2
2
22
22
Turns
2020202020
40404040
40+20
40
20+20
20
2020
2020
Stroke
11111
1111
3
1
3
1
11
11
Closing
2015151515
15151515
10
10
10
10
2020
2020
6
| Lock can be supplied in groups with the same key code (KA execution) | Add final “KA” to compose the article. Es. 2101XZB2525AB2KA
DOUBLE WARD TIGHT LOCKS FOR METAL DOORS
Double ward TIGHT locks that can save room as well as guarantee security. Hook-bolt driven by handle. Lock of the handle by double ward key with 2 turns, galvanized finishing.
N. KEYS
2
MODEL
2101
Locks for metal doors
HANDX=
no hand
X
FINISHINGZB=
galvanized white
ZB
KEY ENTRANCE253035
25
2101XZB2525AB22101XZB3025AB22101XZB3525AB2
2102XZB2525AB22102XZB3025AB22102XZB3525AB2
2103XZB2525AB22103XZB3025AB22103XZB3525AB2
151515
151515
151515
5200XBK25XX
Handle with key-hole escutcheon in black nylon with no visible screws,plastic support and handle square 8x25 mm.
5201XBK25XX
Handle with key-hole escutcheon in black nylon with screws,plastic support and handle square 8x25 mm. Double ward key entrance. Interspace 85 mm.
5202XBK25XX
Handle with key-hole escutcheon in black nylon with screws,plastic support and handle square 8x25 mm. Cylinder key entrance. Interspace 85 mm.
5210XBK25XX
Swinging handle Loretta from zamak. Black finishing.Expansion square 8x25 mm. Size only 10 mm.
FRONTAL WIDTH25
25
KEY MODELB= 0CVBXNISBOZ
B
B=68
KIND OF LOCK
A
A=
double ward 6 gorgeswith reversible key
2= |2 keys
Code
253035
253035
253035
Entrance
222
222
222
Turns
252525
232323
23+2523+2523+25
Stroke
|CODING EXAMPLE
111
222
333
Closing
2161XZB25252161XZB30252161XZB3525
7
CYLINDER EXTENSION LOCKS FOR METAL DOORS
Line of locks for European cylinder EXTENSION metal doors. Bolt and gear rods mechanism driven by handle square. Lock of the handle by Europeancylinder key. The name EXTENSION chosen to point out the rods stroke of 30 mm, the longest on the market. Entrance 25, 30 and 35 mm.Fixing of rods M8 or quick coupling of rods. Strong and reliable line interchangeable with the ones in commerce but with a longer stroke of the rods and therelevant high security.
HANDX=
no hand
X
MODEL
2151
Locks for metal doors extension
FINISHING
ZB
KEY ENTRANCE253035
25
2151XZB25252151XZB30252151XZB3525
2163XZB25252163XZB30252163XZB3525
2168XZB25252168XZB30252168XZB3525
2152XZB25252152XZB30252152XZB3525
2157XZB25252157XZB30252157XZB3525
2153XZB25252153XZB30252153XZB3525
2158XZB25252158XZB30252158XZB3525
QUICK COUPLINGFOR RODS
FRONTAL WIDTH25
25
Code
253035
253035
253035
253035
253035
253035
253035
253035
Entrance
111
111
111
111
111
111
111
111
Turns
282828
282828
28+3028+3028+30
28+3028+3028+30
303030
303030
28+3028+3028+30
28+3028+3028+30
Stroke
|CODING EXAMPLE
ZB=galvanized white
111
111
333
333
222
222
333
333
Closing
QUICK COUPLINGFOR RODS
QUICK COUPLINGFOR RODS
COUPLING M8
COUPLING M8
COUPLING M8
151515
151515
151515
151515
151515
151515
151515
151515
8
| Lock can be supplied in groups with the same key code (KA execution) | Add final “KA” to compose the article. Es. 2200XZB4508AB2KA
2210DZB4508AB2
2215DZB4508AB2
2250XZB4508AB2
2240XZB2008AB2
Double ward lock for rolling shutters and for balancing door. Fixing system interchangeable with the ones in commerce. In central, right and left version. Right and left couple key alike (KA).Available with straight or bended bolt.
DOUBLE WARD LOCKS FOR ROLLING SHUTTERS AND BALANCING DOORS
Code
2200XZB4508AB2
2200XZB4516AB2
2205XZB4508AB2
2205XZB4516AB2
2210SZB4508AB2
2215SZB4508AB2
2230XZB4508AB3
2230XZB4516AB3
2235XZB4508AB3
2235XZB4516AB3
6-30
6-30
3-15
6-30
6-30
6-30
6-30
4-20
6-30
6-30
3-15
2-10
3-15
2-10
KIND OF LOCK
A
HANDX=
no handS=
leftD=
right
X
N. KEYS23
2
MODEL
2200
Locks for rolling shuttersand for balancing doors
|CODING EXAMPLE
KEY MODELB= 0CVBXNISBOZ
B
B=68
FINISHING
ZB
ZB=
galvanized white
A=
double ward 6 gorgeswith reversible key
H. KEY GUIDE08= 8 16= 16
08
2
2
2+2
2
Turns
2
2
2
2
2
2
2+2
2+2
2+2
2+2
Straight
Straight
Bended
Bended
Straight
Straight
Bended
Bended
Straight
Bended
Straight
Straight
Bolt
Straight
Bended
DX
DX
X
X
Hand
X
X
X
X
SX
SX
DX-SX
DX-SX
DX-SX
DX-SX
1
1
3
1
Closing
2
2
2
2
1
1
2
2
2
2
RODS PROJECTION4520
45
9
CYLINDER LOCKS FOR ROLLING SHUTTERS AND BALANCING DOORS
Cylinder locks for rolling shutters and for balancing doors. Fixing system interchangeable with the ones in commrce. Available in central, right, left version. Right and left couple with samekey code (KA). Available with straight or bended bolt.
2275SZB4508XX2
2290XZB2008XX3
2291XZB2070
H. KEY GUIDE08= 8
08
XX
XX
FINISHING
ZB
HANDX=
no handS= | leftD= | right
X
MODEL
2260
Cylinder locks for rolling shuttersand for balancing doors
Code
2260XZB4508XX2
2280XZB4508XX3
2285XZB4508XX3
2275DZB4508XX2
0C22XNISBOZBlank key for cylinder rolling shutter and balancing door locks
| Lock can be supplied in groups with the same key code (KA execution) | Add final “KA” to compose the article.
N. KEYS23
2
RODS PROJECTION4520
45
|CODING EXAMPLE
ZB=
galvanized white
2
1
1
Turns
2
2+2
2+2
2
Bended
Straight
Straight
Bolt
Straight
Straight
Bended
Bended
SX
-
-
Hand
X
DX-SX
DX-SX
DX
1
1
1
Closing
2
2
2
1
20
12
12
20
12
12
20
10
High security double ward locks to apply. Chromed steel bolt 10x60 mm.
| DOUBLE WARD TYPE LOCKS TO APPLY
FINISHINGXX
XX
HANDD=
rightS=
left
D
MODEL
2304
Locks to apply
2304DMA50XXAF32304SMA50XXAF3
2304DMA50XXAF3
2306DMA50XXAF32306SMA50XXAF3
2306DMA50XXAF35050
22
66
11
7272
|CODING EXAMPLE
MA=brown
MA
KEY ENTRANCE50
50
KEY MODELF= 0CAFXNISBOZ
F
F=110
N. KEYS3= |3 keys
3
KIND OF LOCKA=
double ward 6 gorgeswith reversible key
A
Code
5050
Entrance
66
Turns
7272
Stroke
11
Closing
55
11
LITTLE SAFES AND SECURITY CABINET FOR GUNS
Lateral double ward locks with 6 levers. Available with pistons Ø 10 mm or with bolt.
MODEL
2311
Little safes
N. KEYS
2
KEY MODELC= 0CVCXNISBOZ
C
C=78
KEY-GUIDEGC=
with key-guideXX=
without key-guide
GC
2390SZB01GCBC2
2382SZT01XXBC2
2381SZB01GCBC2
2380SZB01GCBC2
2313DZB02XXBC22313SZB02XXBC2
2311SZB01GCBC22311SZB01XXBC22311SZB02GCBC22311SZB02XXBC2
2391SZB01GCBC2
|CODING EXAMPLE
2= |2 keys
FINISHING
ZB
ZB=
galvanized white
HANDD=
rightS=
left
S B
KIND OF LOCKB=
safe 6 gorges
KEY OUTPUT
01
01=
key output on 2nd turn only02=
key output 0 and on 2nd turn
Code
20+14
20
20
20
2020
20202020
20+14
Stroke
CH
CH
CH
CH
CHCH
CHCHCHCH
CH
System
-
84x79x1784x79x17
84x79x1784x79x1784x79x1784x79x17
Measures
-
-
-
-
6
6
6
6
66
6666
6
Gorges
CH = | KEY
3
1
1
1
11
1111
3
Closing *
*
25
25
25
25
5050
5050505050
25
12
Lateral locks, three locking points, 6 or 8 asymmetrical levers with 2 double ward keys not extractable when safe is open. Bi-frontal key code with revolving bolts in chromed steel Ø 22 mm.
2852SR0XXXXF82
2800SROXXXXBC22803SROXXXXBC2
2840SROXXXXF82
XX
XX
N. KNOBSXX03= 3
XX B
KIND OF LOCKB=
safe 6 gorgesF=
safe 8 gorges
MODEL
2800
Safe locs
2810SROXXXXF822830SROXXXXF82
2822SROXXXXF82
2842SROXXXXF82
2850SR0XXXXF82
| SAFE LOCKS 6/8 LEVERS
|CODING EXAMPLE
HANDS=
left
S
FINISHINGRO= |redGR= |greyZB=
galvanized
RO
KEY MODELC= 0CVCXNISBOZ8= 0CF8XNISBOZ
C
C=78 8=79
N. KEYS
2
2= |2 keys
Code
20
2020
20+20
2020
20
20+20
20
Stroke
CH+CO
CHCH
CH
CHCH
CH+CO
CH+CO
CH
System
340x230x38
130x84x26160x84x26
270x160x38
150x100x38210x100x38
210x115x38
270x160x38
340X230X38
Measures
8
66
8
88
8
8
8
Gorges
CH = | KEY CH+CO = | KEY+COMBINATOR
3
11
3
11
1
3
3
Closing *
*
13
2862SROXXXXF82
2870SROXXXXF82
2872SROXXXXF82
2880SROXXXXF82
PS2810XNI22XX
PS2840XNI22XXRevolving bolt piston Ø 22x30 mm for frontal bolts
Revolving bolt piston Ø 22x30 mm for lateral rods
PS2810XNI22XX
2860SROXXXXF82
2312SZB03XXCombinator with 3 knobs and 20 positions each
CH = | KEY CH+CO = | KEY+COMBINATOR
| SAFE LOCKS 6/8 LEVERS
Code
20
20
20
20
20
Stroke
CH+CO
CH
CH+CO
CH
CH
System
360x310x38
300x370x38
300x370x38
300x490x38
360X310X38
Measures
8
8
8
8
8
Gorges
3
3
3
3
3
Closing *
*
2877SGRXXXXF82
14
2815SGRXXXXF822835SGRXXXXF82
2845SGRXXXXF82 8
2855SGRXXXXF82
2857SGRXXXXF82
2847SGRXXXXF82
2865SGRXXXXF82
2875SGRXXXXF82
| SAFE LOCKS 6/8 LEVERS
Code
20
2020
20
20
20
20
20
20
Stroke
CH+CO
CHCH
CH
CH
CH+CO
CH+CO
CH
CH
System
295X450X38
150X100X38210X100X38
262X160X38
310X210X38
310X210X38
262X160X38
185X335X38
295X450X38
Measures
8
88
8
8
8
8
8
Gorges
CH = | KEY CH+CO = | KEY+COMBINATOR
3
11
3
3
3
3
3
3
Closing *
*
15
| ELECTRONIC SAFE LOCKS
Electronic digital combination lock system. Motor-driven movement. 1 internal 9 V alkaline battery-operated, possibility of emergency electric supply. User code from 4 up to 10 digits.Membrane alphanumeric keyboard. On request upper Master Hotel code. Chromed steel rotary bolts Ø 22 mm.
2955SGR
2945SGR
2935SGR
5299XBKLittle nylon handle for electronic safe Ø 66 mm Ø66
20
40
11,5
PP2935XBKXXXXBattery holder for electronic safe lock
2975SGR
2965SGR
FINISHINGGR= |grey
GR
HANDS= |left
S
MODEL
2935
Electronic safe locks
TA2935XBKXXXXKeyboard for electronic safe
|CODING EXAMPLE
Code
16+16
16+16
16
16+16
16+16
Stroke
EL
EL
EL
EL
EL
System
310x210x38
260x160x38
205x100x38
295x450x38
185x335x38
Measures
EL = | ELECTRONIC
3
3
1
3
3
Closing *
*
25M EASY MASTER
Interchangeable double ward heart EASY MASTER. 4 turns, bolts stroke 40 mm, 6 independentlevers to combine with locks art. 2500, 2510, 2530, 2540. 1 site key that can open morelocks, 3 definitive keys in sealed bag to activate when workings are over by simple and quickoperation. The site key is not operative anymore after the activation of the definitive keys.This procedure is possible without the replacement of the double ward heart of the lock.
European cylinder heart Securtina. 4 turns, bolts stroke 40 mm. Cylinder blockingin case of forced extraction. (See features page 22)
Definitive double ward heart with 4 turns, bolts stroke 40 mm, 6 independentlevers. (See features page 17)
25S SECURMAP
25C
European cylinder heart. Interchangeable European cylinder heart with 4 turns,bolts stroke 40 mm.
25K
Universal double ward heart with 4 turns, bolts stroke 40 mm, 2 independent levers,right or left hand with 1 site key KA. The main advantage of this heart is the useof the same key for all locks in site. Then when workings are over, the site heartwill be replaced by double ward heart 25S or European cylinder heart 25C.
16
Line 25 universal for safety doors with double ward or european cylinder interchangeable heart. Tested in class 7 UNI EN 12209 arranged with antidrilling plate.All hearts are always interchangeable even after door installation. All hearts of this line are interchangeable (site heart, double ward, easy master and cylinder heart). This allows thepersonalisation of the lock at any time according to each needs. Moreover in case of keys loss or burglary, the replacement of the heart in the lock is possible by simple and safe procedurewithout the removal of internal panel; just arrange for a gap on the internal side, remove handle, escutcheons and inserts and then proceed with the heart change.
SERVICE KEY (T)It activates the half turn and the first 2 turns and is different for each lock.Example: you can leave this key to cleaning woman. When you close the door on 4 turns by owner’skey, the service one cannot open. Close the lock by owner’s key on 2 turns only to let the service keystill open.
| KEYS MODEL
250
254
253
251
SAFETY DOORS LOCKS LINE 25
17
SECURMAP with the new double ward registered key and the propertycard that guarantees the protected duplication, safeguards you from illegalkey copies. Key duplications can be arranged exclusively by authorizeddealers “Team Securemme”.
On the card you can find the code and numberof keys supplied. The “Team Securemme” willcomplete the card with the date and the numberof copies made. In this you are always updateabout the number of keys in circulation.
The continuous research for new solutions, the decision to be completelyMade In Italy and the trust in the security of a double ward registeredkey with protected duplication, make Securemme to think of a “newconception of security SECURMAP”.SECURMAP, the new lock of latest generation for high security armoureddoors that prevents the most sophisticated manipulation systems
SECURMAP is protected by patents: Registered key with protectedduplication, antipicking swinging levers and mentonnet with specialprofile, new anti-manipulation block lever.SECURMAP is based on the use of new levers and mentonnet with specialprofile that prevent the manipulation with picklocks (fig. A), the additionof steel sphere in the mechanism that prevents the breaking by drilling(fig. B), the tooth with special reduced section avoids the attempt offorcing by improper key (fig. C), resistance against the axial push over8 KN (fig. D).
SAFETY DOORS LOCKS LINE 25
0 1 3
18
| CODING EXAMPLE 2503DCR0028
2503DCR0028S46
250
+
+FIXING PREDISPOSITION
0=1=
3=
| Planar with 4 hub seat
Lateral arranged holes screwed M6
Mortice with frontalarranged planar and lateral
3
MODEL
250251253254
Combine antidrilling plate to get resistance grade 7 from rule UNI EN 12209 (see accessories on page 54)
=INTERSPACE BOLTS
28=37=
28 37 28
+PROJECTION BOLTS
00
+KEY LENGTH FOR DOUBLE WARD HEART
4=5=6=
(00CC4XNISBOZ) 40 | Stem 40 mm(00CC5XNISBOZ) 50 | Stem 50 mm(00CC6XNISBOZ) 60 | Stem 60 mm
4
2503DCR0028
K=
M=S=C=T=
S
+ KA site heart assembledEasy Master | Easy MasterSecurmap | Securmap | Arranged for cylinder heartSecurtina | Securtina
HEART MODEL
K
S
M
C
T
+OPENING DOOR HAND
D=S=R=L=
| push right | push left | pull right | pull left
D RS LD
+FINISHING BOLTS
CR= | chromoCR
KEY FOR DOUBLE WARD HEART
=6 6=
7= | 3 keys +1 key T | 5 keys +1 key T
| See photo page 16
4=40 5=50 6=60
| SINGLE PACKAGING IN CARTOON BOX= 1€
03=
00=
13=06=43=S3=
STANDARD : projection of bolts and latch 3 mm
no projection of bolts and latch for frontal model | projection of bolts and latch 13 mm | projection of bolts and latch 6 mm | projection of bolts and latch 43 mm
projection of bolts 3 mm / projection of latch 6 mm
Stop at this step for lock without any heart assembled. For further requests go on with code combination.
19
Code
2500DCR0328
2500SCR0328
2500DCR0337
2500SCR0337
5
5
5
5
Code
2500DCR0328S46
2500SCR0328S46
2500DCR0337S46
2500SCR0337S46
2503DCR0328S46
2503SCR0328S46
2503DCR0337S46
2503SCR0337S46
5
5
5
5
5
5
5
5
SAFETY DOORS LOCKS LINE 25
Model
250
250
250
250
Hand
DX|Right
SX|Left
DX|Right
SX|Left
Projection
3
3
3
3
Finishing
chromo
chromo
chromo
chromo
N. Keys
3+1T
3+1T
3+1T
3+1T
3+1T
3+1T
3+1T
3+1T
Model
250
250
250
250
250
250
250
250
Hand
DX|Right
SX|Left
DX|Right
SX|Left
DX|Right
SX|Left
DX|Right
SX|Left
Projection
3
3
3
3
3
3
3
3
Finishing
chromo
chromo
chromo
chromo
chromo
chromo
chromo
chromo
Interspace
28
28
37
37
Interspace
28
28
37
37
28
28
37
37
Heart
Securmap
Securmap
Securmap
Securmap
Securmap
Securmap
Securmap
Securmap
2500DCR0328K1
2500SCR0328K1
2500DCR0337K1
2500SCR0337K1
5
5
5
5
Code Model
250
250
250
250
Hand
DX|Right
SX|Left
DX|Right
SX|Left
Finishing
chromo
chromo
chromo
chromo
Projection
3
3
3
3
28
28
37
37
Interspace Heart
site
site
site
site
Fixing
planar
planar
planar
planar
| INDUSTRIAL PACKING | SINGLE PACKAGING IN CARTOON BOX= 1€
| INDUSTRIAL PACKING | SINGLE PACKAGING IN CARTOON BOX= 1€
| INDUSTRIAL PACKING | SINGLE PACKAGING IN CARTOON BOX= 1€
| SINGLE PACKAGING IN CARTOON BOX= 1€
LIST FOR MOST COMMON ARTICLES FOR LOCK WITH SITE HEART INSTALLED
Fixing
planar
planar
planar
planar
LIST FOR MOST COMMON ARTICLES FOR LOCK WITHOUT HEART INSTALLED (order heart apart)
LIST FOR MOST COMMON ARTICLES FOR LOCK WITH SECURMAP HEART INSTALLED
Fixing
planar
planar
planar
planar
planar
planar
planar
planar
Stem key
40
40
40
40
40
40
40
40
20
SAFETY DOORS LOCKS LINE 25M
Lock line 25M reversible, double ward variable mechanism. 6 independent levers. Reversible latch Ø 20 mm driven by handle square 8 mm. When locked the handle doesn't unhook thelatch. Tested in class 7 UNI EN 12209 arranged with antidrilling plate.
240 241 243 244
The continuous research for new solutions, the decision to be completely Made In Italy and thetrust in the security of a double ward registered key with protected duplication, makeSecuremme to think of a “new conception of security SECURMAP”.SECURMAP, the new lock of latest generation for high security armoured doors that preventsthe most sophisticated manipulation systems
SECURMAP with the new double ward registered key and the property card that guarantees the protected duplication, safeguards you from illegal keycopies. Key duplications can be arranged exclusively by authorized dealers “Team Securemme”.
Code
2400UCR0328S462400UCR0337S462403UCR0028S462403UCR0037S462430UCR0328S462430UCR0337S462433UCR0028S462433UCR0037S46
LISTE FOR MOST COMMON ARTICLES FOR LINE 25 REVERSIBLE (locks supplied left)
55555555
Locks in industrial packing except frontal model supplied in single cartoon box
SECURMAP is protected by patents: Registered key, antipicking swinging levers andmentonnet with special profi le, new anti -manipulation block lever.SECURMAP is based on the use of new levers and mentonnet with special profile that preventthe manipulation with picklocks (fig. A), the addition of steel sphere in the mechanism thatprevents the breaking by drilling (fig. B), the tooth with special reduced section avoids the attemptof forcing by improper key (fig. C), resistance against the axial push over 8 KN (fig. D).
N. Keys
3+1T3+1T3+1T3+1T3+1T3+1T3+1T3+1T
Projection
3 3 3 3 3 3 3 3
Hand
UUUUUUUU
Finishing
CR|chromoCR|chromoCR|chromoCR|chromoCR|chromoCR|chromoCR|chromoCR|chromo
Model
240240240240243243243243
Interspace
2837283728372837
Stem key
40 40 40 40 40 40 40 40
Heart
SecurmapSecurmapSecurmapSecurmapSecurmapSecurmapSecurmapSecurmap
Fixing
|planar |planar |frontal |frontal |planar |planar |frontal |frontal
21
| CODING EXAMPLE 2403UCR0028S46
2403UCR0028S46
+INTERSPACE BOLTS
28=37=
28 37 28
+PROJECTION BOLTS
00
+KEY LENGTH FOR DOUBLE WARD HEART
4=5=6=
(00CC4XNISBOZ) 40 | Stem 40 mm(00CC5XNISBOZ) 50 | Stem 50 mm(00CC6XNISBOZ) 60 | Stem 60 mm
4
+FINISHING BOLTS
CR= | chromoCR
KEY FOR DOUBLE WARD HEART
=6 6=
7= | 3 keys +1 key T | 5 keys +1 key T
S=S
+Securmap | Securmap
HEART MODEL
0 1 3
+FIXING PREDISPOSITION
0=1=
3=
3
240
+MODEL
240241243244
+OPENING DOOR HAND
U=universal reversible right/leftU U
| See photo page 20
4=40 5=50 6=60
| SINGLE PACKING IN CARTOON BOX= 1€
| Planar with 4 hub seat
Lateral arranged holes screwed M6
Mortice with frontalarranged planar and lateral
03=
00=
13=06=43=S3=
STANDARD : projection of bolts and latch 3 mm
no projection of bolts and latch for frontal model | projection of bolts and latch 13 mm | projection of bolts and latch 6 mm | projection of bolts and latch 43 mm
projection of bolts 3 mm / projection of latch 6 mm
Combine antidrilling plate to get resistance grade 7 from rule UNI EN 12209 (see accessories on page 54)
22
SAFETY DOORS LOCKS LINE 26
Locks line 26 with European cylinder mechanism. Reversible latch Ø 20 mm driven by key and handle square 8 mm. Tested in class 7 UNI EN 12209 arranged with antidrilling plate.
260 261 263 264
ON REQUEST: SPECIAL SECURTINA BLOCKThe device is activated only in case of forced extraction or break of the cylinder. In thisway thieves cannot open the lock and relevant bolts.The lock remains stuck thus avoidingintrusion into the apartment.
Code
2600UCR0328CXX2600UCR0337CXX2600UCR0328TXX2600UCR0337TXX2603UCR0028CXX2603UCR0037CXX2610XCR0328CXX2630UCR0328CXX2630UCR0337CXX2633UCR0028CXX2640UCR0328CXX2640UCR0337CXX2643UCR0037CXX2643UCR0028CXX
LISTE FOR MOST COMMON ARTICLES FOR LINE 26 REVERSIBLE (locks supplied left)
Model
260260260260260260261263263263264264264264
Projection
3 3 3 3 3 3 3 3 3 3 3 3 3 3
Finishing
CR|chromoCR|chromoCR|chromoCR|chromoCR|chromoCR|chromoCR|chromoCR|chromoCR|chromoCR|chromoCR|chromoCR|chromoCR|chromoCR|chromo
Heart
Locks in industrial packing except frontal model supplied in single cartoon box
Interspace
2837283728372828372828373728
Hand
|universal |universal |universal |universal |universal |universal |universal |universal |universal |universal |universal |universal |universal |universal
Fixing
|planar |planar |planar |planar |frontal |frontal |planar |planar |planar |frontal |planar |planar |frontal |frontal
SecurtinaSecurtina
55555555555555
23
| CODING EXAMPLE 2603UCR0028CXX
2603UCR0028CXX
+INTERSPACE BOLTS
28=37=
28 37 28= 0
+PROJECTION BOLTS
00= 0
+FINISHING BOLTS
CR= | chromoCR= 0
CXX=TXX=CXX= 0
= | Arranged for cylinder heartSecurtina | Securtina
HEART MODEL
0 1 3
+FIXING PREDISPOSITION
3= 4,00
260= 50,00
+MODEL
260261263264
+OPENING DOOR HAND
U=U= 0 universal reversible right/left U
| See photo page 22
Standard supply of lock left-hand
0=1=
3=
| Planar with 4 hub seat
Lateral arranged holes screwed M6
Mortice with frontalarranged planar and lateral
03=
00=
13=06=43=S3=
STANDARD : projection of bolts and latch 3 mm
no projection of bolts and latch for frontal model | projection of bolts and latch 13 mm | projection of bolts and latch 6 mm | projection of bolts and latch 43 mm
projection of bolts 3 mm / projection of latch 6 mm
Combine antidrilling plate to get resistance grade 7 from rule UNI EN 12209 (see accessories on page 54)
| SINGLE PACKAGING IN CARTOON BOX= 1€
24
Reinforced total lock with double ward variable heart, 6 independent levers, 4 turns and bolts stroke 40 mm. Enter key 63 mm. Endowed with upper and lower switches, 1 limiting deviceand rods. Completed article to reduce assembly time.
Code
6530D100337S466530S100337S466530D110328S466530S110328S46
Interspace
37372828
Code
6500D090337S466500S090337S466500D100328S466500S100328S46
Interspace
37372828
60606060
FIXING0=
planar
0 00
MODEL
650
Total locks= 650 653660663
12
3
45678
910
EXAMPLE: 10 CLOSING POINTS*
| REINFORCED TOTAL LOCKS
|CODING EXAMPLE
HANDS=
leftD=
right
D
N. KEYS6=
3 keys + 1 key T
6
KEY MODEL
4
4= 0CC4XNISB0Z
4=85
Measures
138x1700138x1700138x1700138x1700
Hand
DXSXDXSX
Measures
138x1700138x1700138x1700138x1700
Hand
DXSXDXSX
CLOSING POINTS09 10 11
10
see example:10 CLOSING POINTS
**
FEATURES
Projection latch and boltsfrom box03=
Standard: bolts and latch + 3 mm
INTERSPACE28 37
28
KEY TYPES= Securmap
SecurmapC=
Cylinder
S
60606060
Reinforced total lock with European cylinder, 3 turns, bolts stroke 30 mm. Enter key 63 mm. Endowed with upper and lower switches, 1 limiting device and rods.Completed article endowed with lock, limiting device, switches and rods to reduce assembly time.
25
Code
6600D090337CXX6600S090337CXX6600D100328CXX6600S100328CXX
Code
6630D100337CXX6630S100337CXX6630D110328CXX6630S110328CXX
Interspace
37372828
Interspace
37372828
60606060
60606060
| REINFORCED TOTAL LOCKS
Measures
138x1700138x1700138x1700138x1700
Hand
DXSXDXSX
Measures
138x1700138x1700138x1700138x1700
Hand
DXSXDXSX
For further information contact our offices.
For further information contact our offices.
26
Electromechanical locks with both electronic and mechanical operation, door opening allowed with or without electrical supply, easy application on standard safety doors. Opening by key-code on numbered keyboard, trasponder, European cylinder key and remote control which allows opening by high-tech systems. (Through entry-phone, computer, buttons or mobile phone).For operation through mobile phone you need to order the GSM modem apart (art. SH2700MD). All electronic components are on the heart lock. In case of not good working, easy replacementof the heart as in mechanical locks without removing the internal panel. Internal open/close keyboard in escutcheon of the door. Main electronic card that allows different opening systems,installed outside the door, direct supply from 85 V to 264 V.
SAFETY DOORS LOCKS LINE 27 RESTYLING
* Standard supply of the locks: 3 pieces art. 2700T + 1 piece art. 2700C master, electronic card, internal / external keyboard, junction box and cylinder gear
MODEL
270
Locks line 27electromechanical270 273
KEY TYPEC=
Cylinder
C
N. TRASPONDER0C27XXXKYF
3
N. MASTER0C27XXXCARD
1
INTERSPACE28 37
28
DXSXDXSXDXSXDXSXDXSXDXSX
Code
2701DCR0328C132701SCR0328C132701DCR0337C132701SCR0337C132700DCR0328C132700SCR0328C132700DCR0337C132700SCR0337C132703DCR0028C132703SCR0028C132703DCR0037C132703SCR0037C13
2731DCR0328C132731SCR0328C132731DCR0337C132731SCR0337C132730DCR0328C132730SCR0328C132730DCR0337C132730SCR0337C132733DCR0028C132733SCR0028C132733DCR0037C132733SCR0037C13
DXSXDXSXDXSXDXSXDXSXDXSX
SH2700MD
Modem GSM for opening by mobilephone and distance remote control
27EXSZB
27EXDZBCuore a cilindro dx per elettromeccanica
Cuore a cilindro sx per elettromeccanica
Lateral, enter 63, interspace 28 mm
Lateral, enter 63, interspace 37 mm
Planar, enter 63, interspace 28 mm
Planar, enter 63, interspace 37 mm
Mortice, enter 63, interspace 28 mm
Mortice, enter 63, interspace 37 mm
*
Lateral, enter 63, interspace 28 mm
Lateral, enter 63, interspace 37 mm
Planar, enter 63, interspace 28 mm
Planar, enter 63, interspace 37 mm
Mortice, enter 63, interspace 28 mm
Mortice, enter 63, interspace 37 mm
Description Hand
3
3
3
3
3
3
3
3
3
3
3
3
Turns
HANDS=
leftD=
right
D
INISHINGCR=
chromo
CR
|CODING EXAMPLE
FEATURES
03
Projection latch and bolts from box00=
no projection of bolts and latch 3 mm03=
Standard: bolts and latch + 3 mm
FIXING
1
1=lateral
0=planar
3=frontal
27
SPARE PARTS AND ACCESSORIES FOR LINE 27 RESTYLING
Code Description
3200QCS30301X5
3201QCS30301X5
3200QCS30351X5
3201QCS30351X5
3200QCS30401X5
3201QCS30401X5
3200QCS30501X5
3201QCS30501X5
European right cylinder 60 30-30 suitable for knob
European left cylinder 60 30-30 suitable for knob
European right cylinder 65 30-35 suitable for knob
European left cylinder 65 30-35 suitable for knob
European right cylinder 70 30-40 suitable for knob
European left cylinder 70 30-40 suitable for knob
European right cylinder 80 30-50 suitable for knob
European left cylinder 80 30-50 suitable for knob
KIT2730OLKIT2730F4KIT2730CSKIT2730CLKIT2730F1KIT2730F3
KIT 2730
Kit made up of:INSIDE - Long escutcheon with open/close keyboard,handle, insert, escutcheon and insert for service cylinder(4300+4015XBK), 2 half moons for knob cylinder andexpansion square (line 5110).OUTSIDE - escutcheon for external keyboard, 2 kit protectorand middle door knob kit.
KIT2700OLKIT2700F4KIT2700CSKIT2700CLKIT2700F1KIT2700F3
KIT 2700
Kit made up of:INSIDE - Long escutcheon with open/close keyboard,handle, insert, 1 half moon for knob cylinder and exspansionsquare (line 5110).OUTSIDE - escutcheon for external keyboard, kit protectorand middle door knob kit.
0C27XXXCARD
0C27XXXKYF
PV2700XZBXXXX
Credit card trasponder in addition to standard supply
Key-ring trasponder in addition to standard supply
Junction box
0C27XXXCARD0C27XXXKYF
Finishing
OLF4CSCLF1F3
OLF4CSCLF1F3
CS
CS
CS
CS
CS
CS
CS
CS
INSIDEOUTSIDE
INSIDEOUTSIDE
For cylinder choose among articles above. The price of kit does not include the cylinder.The good working of the lock is guaranteed only with Securemme cylinders.
For cylinder choose among articles above. The price of kit does not include the cylinder.The good working of the lock is guaranteed only with Securemme cylinders.
Chromium satin finishing
3000MCS2510XX33000MCS2510XX3XXK53000MCS3010XX33000MCS3010XX3XXK53000MCS3510XX33000MCS3510XX3XXK53000MCS4010XX33000MCS4010XX3XXK53000MCS4510XX33000MCS5010XX33000MCS5510XX33000MCS6010XX3
3000PCS3030XX33000PCS3530XX33000PCS4030XX33000PCS3535XX33000PCS4530XX33000PCS4035XX33000PCS5030XX33000PCS4535XX33000PCS4040XX33000PCS6030XX33000PCS5535XX33000PCS5040XX33000PCS4545XX33000PCS4050XX33000PCS6040XX33000PCS5050XX3
3000QCS3030XX33000QCS3035XX33000QCS3040XX33000QCS3045XX33000QCS3050XX3
--
3000CCS3030XX33000CCS3035XX33000CCS3040XX33000CCS3535XX33000CCS3045XX33000CCS3540XX33000CCS3050XX33000CCS3545XX33000CCS4040XX33000CCS3055XX33000CCS3550XX33000CCS4045XX33000CCS3060XX33000CCS3555XX33000CCS4050XX33000CCS4545XX33000CCS3560XX33000CCS4055XX33000CCS4550XX33000CCS3070XX33000CCS4060XX33000CCS5050XX33000CCS4070XX33000CCS5060XX33000CCS6060XX3
Brass finishing
3000MOL2510XX33000MOL2510XX3XXK53000MOL3010XX33000MOL3010XX3XXK53000MOL3510XX33000MOL3510XX3XXK53000MOL4010XX33000MOL4010XX3XXK53000MOL4510XX3
---
3000POL3030XX33000POL3530XX33000POL4030XX33000POL3535XX33000POL4530XX33000POL4035XX33000POL5030XX33000POL4535XX33000POL4040XX33000POL6030XX33000POL5535XX33000POL5040XX33000POL4545XX33000POL4050XX33000POL6040XX33000POL5050XX3
3000QOL3030XX33000QOL3035XX33000QOL3040XX33000QCS3050XX33000QOL3050XX3
3090COL2727XX33090COL2733XX3
3000COL3030XX33000COL3035XX33000COL3040XX33000COL3535XX33000COL3045XX33000COL3540XX33000COL3050XX33000COL3545XX33000COL4040XX33000COL3055XX33000COL3550XX33000COL4045XX33000COL3060XX33000COL3555XX33000COL4050XX33000COL4545XX33000COL3560XX33000COL4055XX33000COL4550XX33000COL3070XX33000COL4060XX33000COL5050XX3
---
28
| KA execution (key alike) on request euro 3,00 in addition to cylinder standard cost. | Cylinder for electronic gate, finishing CS art. 300OECS1530XX 19,50 euro.
| CYLINDERS LINE KY
A
BC
A
C
B
A
C
B
A
B
C
Line
3000-M3000-M3000-M3000-M3000-M3000-M3000-M3000-M3000-M3000-M3000-M3000-M
B
30
C
10
XX
XX
X
X
LINE
3000
Cylinder KY3000= standard3090=
oval
3000-P3000-P3000-P3000-P3000-P3000-P3000-P3000-P3000-P3000-P3000-P3000-P3000-P3000-P3000-P3KY0-P
3000-Q3000-Q3000-Q3000-Q3000-Q
3090-O3090-O
3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C3000-C
C
101010101010101010101010
30303035303530354030354045504050
3035404550
2733
30354035454050454055504560555045605550706050706060
B
252530303535404045505560
30354035454050454060555045406050
3030303030
2727
30303035303530354030354030354045354045304050405060
A
353540404545505055606570
6065707075758080809090909090100100
6065707580
5560
60657070757580808085858590909090959595100100100110110120
|CODING EXAMPLE
FINISHINGOL=
polished brassCS=
satin chromo
OL
Line KY 5 pins, verical standard key, 3 brass nickeled keys insealed beg.
MODEL
M
C= | keyM= | half cylinderP= | with knobQ= | knob predisposition
KA EXECUTIONS
K5
DEFINITIVE KEYS3
3
K1= 10 KA|10 pcs. KAK5= 50 KA|50 pcs. KA
10-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-50
10-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-50
10-5010-5010-5010-5010-50
10-5010-50
10-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-50
A
C
B
Brass finishing
--
3100MOL30101X3XXK13100MOL35101X3XXK13100MOL40101X3XXK13100MOL50101X3XXK1
3100QOL30301X33100QOL30351X33100QOL30401X33100QOL30451X33100QOL30501X3
3100POL30301X33100POL35301X33100POL40301X33100POL35351X33100POL45301X33100POL40351X33100POL50301X33100POL45351X33100POL40401X33100POL60301X33100POL55351X33100POL50401X33100POL45451X33100POL40501X33100POL60401X33100POL50501X3
3100COL30301X33100COL30351X33100COL30401X33100COL35351X33100COL30451X33100COL35401X33100COL30501X33100COL35451X33100COL40401X33100COL30551X33100COL35501X33100COL40451X33100COL30601X33100COL35551X33100COL40501X33100COL45451X33100COL35601X33100COL40551X33100COL45501X33100COL30701X33100COL40601X33100COL50501X33100COL30801X33100COL40701X33100COL50601X3
Chromium satin finishing
3100MCS25101X1XXK53100MCS30101X1XXK5
----
-------------------------
-----
----------------
A
354040455060
6065707580
6065707075758080809090909090100100
60657070757580808085858590909090959595100100100110110110
B
253030354050
3030303030
30354035454050454060555045406050
30303035303530354030354030354045354045304050304050
C
101010101010
3035404550
30303035303530354030354045504050
30354035454050454055504560555045605550706050807060
10-5010-5010-5010-5010-5010-50
10-5010-5010-5010-5010-50
10-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-50
10-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-50
Line K1 6 pins, 1 site key + 3 definitive keys. Cylinder with "SITE KEY SYSTEM" that allows the use of the first key (site key) during workings. Then when workings are over, you willhand to the final owner the keys in sealed bag that by modifying the code will make the site key not operative anymore.
| CYLINDERS LINE K1
A
BC
A
B
C
Line
3100-M3100-M3100-M3100-M3100-M3100-M
3100-Q3100-Q3100-Q3100-Q3100-Q
3100-P3100-P3100-P3100-P3100-P3100-P3100-P3100-P3100-P3100-P3100-P3100-P3100-P3100-P3100-P3100-P
3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C3100-C
A
C
B
LINE
3100
Cylinder K1
3100
29
B
30
C
10
SITE KEY1
1
X
X
DEFINITIVE KEYS1 3
3
KA EXECUTIONSK1= 10 KA|10 pcs. KAK5= 50 KA|50 pcs. KA
K1
MODEL
M
XX
XX
FINISHINGOL=
polished brassCS=
satin chrome
OL
|CODING EXAMPLE
C= | keyM= | half cylinderP= | with knobQ= | knob predisposition
| KA execution (key alike) on request euro 5,00 in addition to cylinder standard cost. |Sample execution 8,00 euro.
3200COL30301X53200COL30351X53200COL30401X53200COL35351X53200COL30451X53200COL35401X53200COL30501X53200COL35451X53200COL40401X53200COL30551X53200COL35501X53200COL40451X53200COL30601X53200COL35551X53200COL40501X53200COL45451X53200COL35601X53200COL40551X53200COL45501X53200COL30701X53200COL40601X53200COL50501X53200COL45551X53200COL30801X53200COL40701X53200COL50601X53200COL30901X53200COL40801X53200COL50701X5
---
3200MOL30101X33200MOL30101X3XXK1
-3200MOL35101X3XXK13200MOL35101X3XXK1
-3200MOL40101X33200MOL40101X3XXK1
------
Brass finishing
3200CCS30301X53200CCS30351X53200CCS30401X53200CCS35351X53200CCS30451X53200CCS35401X53200CCS30501X53200CCS35451X53200CCS40401X53200CCS30551X53200CCS35501X53200CCS40451X53200CCS30601X53200CCS35551X53200CCS40501X53200CCS45451X53200CCS35601X53200CCS40551X53200CCS45501X53200CCS30701X53200CCS40601X53200CCS50501X53200CCS45551X53200CCS30801X53200CCS40701X53200CCS50601X53200CCS30901X53200CCS40801X53200CCS50701X5
Chromium satin finishing
3200MCS25101X33200MCS25101X3XXK13200MCS25101X3XXK53200MCS30101X33200MCS30101X3XXK13200MCS30101X3XXK53200MCS35101X33200MCS35101X3XXK13200MCS35101X3XXK53200MCS40101X33200MCS40101X3XXK13200MCS50101X33200MCS50101X3XXK13200MCS60101X33200MCS60101X3XXK13200MCS70101X33200MCS70101X3XXK1
30
KA execution (key alike) on request euro 5,00 in addition to cylinder standard cost for line C-P-Q. |Sample execution 8,00 euro.
Line K2 10 pins, 1 site key + 5 definitive keys. Cylinder with "SITE KEY SYSTEM" that allows the use of the first key (site key) during workings. Then when workings are over, youwill hand to the final owner the keys in sealed bag that by modifying the code will make the site key not operative anymore.
A
B
C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C3200-C
Line
3200-M3200-M3200-M3200-M3200-M3200-M3200-M3200-M3200-M3200-M3200-M3200-M3200-M3200-M3200-M3200-M3200-M
A
BC
B
25
C
10
LINE
3200
Cylinder K2
3200=cam dx3201=cam sx
DEFINITIVE KEYS35
3
X
X
3035403545405045405550456055504560555070605055807060908070
C
1010101010101010101010101010101010
3030303530353035403035403035404535404530405045304050304050
B
2525253030303535354040505060607070
60657070757580808085858590909090959595100100100100110110110120120120
A
3535354040404545455050606070708080
SITE KEY1
1
MODEL
M
FINISHINGOL=
polished brassCS=
satin chromo
CS
KA EXECUTIONSK1= 10 KA|10 pcs. KAK5= 50 KA|50 pcs. KA
K1
XX
XX
| CYLINDERS LINE K2
|CODING EXAMPLE
C= | keyM= | half cylinderP= | with knobQ= | knob predispositionG= | wheel camE= | electronic gate
10-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-50
10-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-50
3200QCS30301X53200QCS30351X53200QCS30401X53200QCS30451X53200QCS30501X53200QCS30601X53200QCS30701X5
3201QCS30301X53201QCS30351X53201QCS30401X53201QCS30501X5
Chromium satin finishing
3200PCS30301X53200PCS35301X53200PCS40301X53200PCS35351X53200PCS45301X53200PCS40351X53200PCS50301X53200PCS45351X53200PCS40401X53200PCS35451X53200PCS40451X53200PCS60301X53200PCS55351X53200PCS50401X53200PCS45451X53200PCS40501X53200PCS60401X53200PCS50501X5
3200QOL30301X53200QOL30351X53200QOL30401X53200QOL30451X53200QOL30501X53200QOL30601X53200QOL30701X5
3201QCS30301X53201QCS30351X53201QCS30401X53201QCS30501X5
Brass finishing
3200POL30301X53200POL35301X53200POL40301X53200POL35351X53200POL45301X53200POL40351X53200POL50301X53200POL45351X53200POL40401X53200POL35451X53200POL40451X53200POL60301X53200POL55351X53200POL50401X53200POL45451X53200POL40501X53200POL60401X53200POL50501X5
31
3200-Q3200-Q3200-Q3200-Q3200-Q3200-Q3200-Q
3201-Q3201-Q3201-Q3201-Q
Line
30354045506070
30354050
C
303030353035303540454530354045504050
30303030303030
30303030
B
303540354540504540354060555045406050
606570758090100
60657080
A
60657070757580808080809090909090100100
3200-P3200-P3200-P3200-P3200-P3200-P3200-P3200-P3200-P3200-P3200-P3200-P3200-P3200-P3200-P3200-P3200-P3200-P
3201: cylinders with left CAM 30° for electromechanical left lock line 27 (see page 27)
Line Code
3200-E 3200ECS1530XX
Description
Cylinder for electronic gate
A
C
B
A
C
B
Description
Possibility of execution cylinder with toothed CAM 10 or 13 teeth.Line key-key. 3,00 euro in addition to standard cost.Set the code as example in the top of page 30.
A
B
C
Line
3200-G
| CYLINDERS LINE K2
| KA execution (key alike) on request euro 5,00 in addition to cylinder standard cost. |Sample execution 8,00 euro.
10-5010-5010-5010-5010-5010-5010-50
10-5010-5010-5010-50
10-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-50
Chromium satin finishing
3300MCS30101X33300MCS30101X3XXK13300MCS35101X33300MCS35101X3XXK1330M0504010C133300MCS40101X3XXK13300MCS50701X3
3300CCS30301X53300CCS30351X53300CCS30401X53300CCS35351X53300CCS30451X53300CCS35401X53300CCS30501X53300CCS35451X53300CCS40401X53300CCS30551X53300CCS35501X53300CCS40451X53300CCS30601X53300CCS35551X53300CCS40501X53300CCS45451X53300CCS35601X53300CCS40551X53300CCS45501X53300CCS30701X53300CCS40601X53300CCS50501X53300CCS30801X53300CCS40701X53300CCS50601X530030CCS50701X5
32
KA execution (key alike) on request euro 5,00 for line C-P-Q and groups MK euro 15,00 in addition to cylinder standard cost for line C and euro 10,00 for line M-Q-P . Pass execution 8,00 euro.
Line K3 6 pins and double key-coding system, 1 site key + 5 silver nickel keys. Cylinder with "SITE KEY SYSTEM" that allows the use of the first key (site key) during workings.Then when workings are over, you will hand to the final owner the keys in sealed bag that by modifying the code will make the site key not operative anymore.
A
B
C
A
BC
Line
3300-M3300-M3300-M3300-M3300-M3300-M3300-M
LINE
3300
Cylinder K3
3300
3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C3300-C
A
40404545505060
60657070757580808085858590909090959595100100100110110110120
B
30303535404050
3030303530353035403035403035404535404530405030405050
C
10101010101010
3035403545405045405550456055504560555070605080706070
C
10
B
30
MODEL
M
SITE KEY1
1
KA EXECUTIONSK1= 10 KA|10 pcs. KA
K1
XX
XX
| CYLINDERS LINE K3
|CODING EXAMPLE
FINISHINGCS=
satin chromo
CS
C= | keyM= | half cylinderP= | with knobQ= | knob predisposition
DEFINITIVE KEYS35
5
X
X
10-5010-5010-5010-5010-5010-5010-50
10-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-5010-50
Chromium satin finishing
3300PCS30301X5
3300PCS35301X5
3300PCS40301X5
3300PCS35351X5
3300PCS45301X5
3300PCS40351X5
3300PCS50301X5
3300PCS45351X5
3300PCS40401X5
3300PCS60301X5
3300PCS55351X5
3300PCS50401X5
3300PCS45451X5
3300PCS40501X5
3300PCS60401X5
3300PCS50501X5
3300QCS30301X5
3300QCS30351X5
3300QCS30401X5
3300QCS30451X5
3300QCS30501X5
33
| CYLINDERS LINE K3
Line
A
C
B
3300-P
3300-P
3300-P
3300-P
3300-P
3300-P
3300-P
3300-P
3300-P
3300-P
3300-P
3300-P
3300-P
3300-P
3300-P
3300-P
A
C
B
3300-Q
3300-Q
3300-Q
3300-Q
3300-Q
A
60
65
70
70
75
75
80
80
80
90
90
90
90
90
100
100
60
65
70
75
80
B
30
35
40
35
45
40
50
45
40
60
55
50
45
40
60
50
30
30
30
30
30
C
30
30
30
35
30
35
30
35
40
30
35
40
45
50
40
50
30
35
40
45
50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
10-50
34
3000SOT3015Half cylinder knob predisposition Ø 8x14 mm.
3000QOT3015Half cylinder knob predisposition Ø 8x52 mm.
| SITE CYLINDERS
Code Description
3000SOT153OXX1XXKA
Site cylinder with KA key. The main advantage of this cylinder is theuse of the same key for all doors in site. When workings are over,replace the site cylinder with the definitive one.
35
| CYLINDERS: SPARE PARTS
Code Description
0CK3XNICODE
0CK3XNIPLUS
0CK3XNISBOZ
Key codified as sample for cylinder K3
Additional key to standard supply for cylinder K3
Blank key for cylinder K3
0CK2XNICODE
0CK2XNIPLUS
0CK2XNISBOZ
0CK2XNISBFL
Key codified as sample for cylinder K2
Additional key to standard supply for cylinder K2
Blank key for cylinder K2
Blank key with foldable grip for cylinder K2. Smaller size of the key.Useful for those who have not much room.
0CK1XNICODE
0CK1XNIPLUS
0CK1XNISBOZ
Key codified as sample for cylinder K1
Additional key to standard supply for cylinder K1
Blank key for cylinder K1
IM3100XA2XXXX
IM3200XBKXXXX
IM3300XVEXXXX
Cover-key for cylinder K1
Cover-key for cylinder K2
Cover-key for cylinder K3 | Personalized cover-key on request.
0CKYXNICODE
0CKYXNIPLUS
0CKYXNISBOZ
Key codified as sample for cylinder KY
Additional key to standard supply for cylinder KY
Blank key for cylinder KY
PR3000SZB0838
PR3000SZB0847
PR3000SZB0854
Additional tail device for all cylinder line P and line Q length 38 mm
Additional tail device for all cylinder line P and line Q length 47 mm
Additional tail device for all cylinder line P and line Q length 54 mm
36
| PROTECTOR BLINDO LINE T
LINE T
4246 5
KEY-GUIDEFEATURESX=
empty fieldK=
kit inside-outsideE=
outside only
K
4246KOL25M54246KPV25M54246KOS25M54246KCL25M54246KCS25M54246KF125M54246KF325M54246KF425M5
4246KOL35M54246KPV35M54246KOS35M54246KCL35M54246KCS35M54246KF135M54246KF335M54246KF435M5
OLPVOSCLCSF1F3F4
OLPVOSCLCSF1F3F4
4146XOL
4300 4300
4010XBK
Kit (in+out) protectorØ 46x25 mm cylinder h 30
Kit (in+out) protectorØ 46x35 mm cylinder h 40
Code Description Finishing
4246XZT25M5
1515151515151515
1515151515151515
4246EOL25M54246EPV25M54246EOS25M54246ECL25M54246ECS25M54246EF125M54246EF325M54246EF425M5
4246EOL35M54246EPV35M54246ESV35M54246ECL35M54246ECS35M54246EF135M54246EF335M54246EF435M5
OVPVOSCLCSF1F3F4
OLPVOSCLCSF1F3F4
4146XOL
4300
Kit protector outsideØ 46x25 mm cylinder h 30
Kit protector outsideØ 46x35 mm cylinder h 40
4246XZT25M5
1515151515151515
1515151515151515
|CODING EXAMPLE
H. DEFENDER25303545
25
INTERSPACES HOLES DEFENDER
A=
interspace 31 mmM=
interspace 38 mm
M
INTERNAL EXTERNAL
EXTERNAL
FINISHING
OL
5=
key-guideSecuremme
Protector= 4246
Cover= 4146 | Plates= 4506 | Escutcheons= 4300
4305 | Inserts= 4010
4011 4012 4015
|Tickness= DC4246
37
| KIT LINE T OF PROTECTION
4506KOL4506KPV4506KOS4506KCL4506KCS4506KF14506KF34506KF44506KF54506KF9
Escutcheons 62x170 mm, hole 46, including plastic support andadapters for handle Ø 15,16,18 e niplex M10. To combine withlocks line 25 universal only for cylinder heart and line 26.Predisposition for inserts and protector Blindo.
DC4246XZB10DFThickness in galvanized steel 1 mm
4010XBK4011XBK4012XBK
4015XBK
Cylinder insert for escutcheons line 4300 and 4506
Knob cylinder insert for 4300 and 4506
4010XBK4015XBK
Code Description
4246XZT25M5
4246XZT30M5
4246XZT35M5
4246XZT45M5
4246XZT25A5
Protector Ø 46x25 mm for cylinder h 30. Interspace 38 mm.
Protector Ø 46x25 mm for cylinder h 35. Interspace 38 mm.
Protector Ø 46x35 mm for cylinder h 40. Interspace 38 mm.
Protector Ø 46x45 mm for cylinder h 50. Interspace 38 mm.
Protector Ø 46x25 mm for cylinder h 30. Interspace 31 mm.
OLPVOSCLCSF1F3F4F5F9
BK
BK
Finishing
ZT
ZT
ZT
ZT
ZT
60
60
60
60
60
4146XOL4146XPV4146XOS4146XCL4146XCS4146XF14146XF34146XF44146XF54146XF9
| Cover
To combine with the protector
OLPVOSCLCSF1F3F4F5F9
120120120120120120120120120
4300KOL4300KPV4300KOS4300KCL4300KCS4300KF14300KF34300KF44300KF54300KF9
External escutcheons 62x82 mm, hole 46, including plastic support.To combine with locks line 25M and line 26. Predisposition for allinserts page 43 and protector Blindo.
OLPVOSCLCSF1F3F4F5F9
120120120120120120120120120
4305KOL4305KCL4305KCS4305KF14305KF34305KF4
8 mm external bent escutcheons 62x82 mm, hole 46, includingplastic support. To combine with protector Blindo 4246.
OLCLCSF1F3F4
120120120120120120
60606060606060606060
4260XZT30M5
Tear-proof protector with basis Ø 60 mm Ø 46x30 mm for cylinder h 30/35 mm
60
|To combine with the cover below
|To combine with the cover below
38
| PROTECTOR FORTEZZA
LINE FORTEZZA
4250
Protector= 4250
Cover= 4150 |Escutcheons= 4330
H. DEFENDER152225
15
FINISHING
ZT
FEATURESX=
empty fieldE=
outside only
X
Protector FORTEZZA for safety doors and frames. Anti-drilling steel body, Ø 50 mm, interspace 38 mm. Heights available: 15, 22, 25 mm.
5
KEY-GUIDE
4330XPV13XX4330XCL13XX4330XCS13XX4330XF413XX4330XBK13XX
Tear-proof escutcheon in bended steelarranged for protectore Ø 50 mm h 15
4150XPV4150XCL4150XCS4150XF4
Finishing cover for protector Fortezza
| Possibility to combine the protector with standard escutcheon Ø 50 line 4320 pag. 40
4251EPV22M54251ECL22M54251ECS22M54251EF422M5
Completed kit protector Fortezza Ø 50 x 22
4251EPV15M54251ECL15M54251ECS15M54251EF415M5
Completed kit protector Fortezza Ø 50 x15
4330XPV27XX4330XCL27XX4330XCS27XX4330XF427XX Tear-proof escutcheon in bended steel
arranged for protectore Ø 50 mm h 25
4330XPV22XX4330XCL22XX4330XCS22XX4330XF422XX4330XBK22XX
Tear-proof escutcheon in bended steelarranged for protectore Ø 50 mm h 22
Code Description
4250XZT15M5
4250XZT22M5
4250XZT25M5
Protector Fortezza Ø50x15 mm
Protector Fortezza Ø50x22 mm
Protector Fortezza Ø50x25 mm
4251EPV25M54251ECL25M54251ECS25M54251EF425M5
Completed kit protector Fortezza Ø 50 x 25
PVCLCSF4BK
PVCLCSF4
PVCLCSF4
PVCLCSF4
PVCLCSF4
PVCLCSF4BK
Finishing
ZT
ZT
ZT
PVCLCSF4
INTERSPACES HOLES DEFENDER
M=interspace 38 mm
M
|CODING EXAMPLE
5=
key-guideSecuremme
| To combine with cover and taer-proof escutcheon
| To combine with cover and taer-proof escutcheon
6060606060
120120120120
15151515
15151515
60606060
6060606060
60
60
60
15151515
39
| PROTECTOR OVAL LINE O
LINE 0
4242
Protector= 4242
Cover= 4142
Escutcheons= 43104315
| Plates=4510
| Inserts=44604465
4460XBK
4465XBK
4510KOL4510KCL4510KCS4510KF14510KF34510KF44510KF5
Plate 62x170 mm
4315KOL4315KCL4315KCS4315KF14315KF4
Bent escutcheon
4310KOL4310KCL4310KCS4310KF14310KF34310KF44310KF5
Escutcheon 62x82 mm
4142XOL4142XCL4142XCS4142XF14142XF34142XF44142XF5
Code Description
4242XZT25M5
4242XZT35M5Protector 42x50 h24
Protector 42x50 h34
To combine with the cover below
To combine with the protector
|CODING EXAMPLE
FEATURESX=
empty fieldK= |kit
X
H. DEFENDER253545
25
FINISHING
ZT
INTERSPACES HOLES DEFENDERM=
interspace 38 mm
M 5
KEY-GUIDE5=
key-guideSecuremme
BK
BK
OLCLCSF1F3F4F5
OLCLCSF1F4
OLCLCSF1F3F4F5
OLCLCSF1F3F4F5
Finishing
ZT
ZT
Insert cylinder for line 4510, 4300
Insert knob cylinder for line 4510, 4300
-------
------
-------
-------
Size external cylinder
30
40
4460XBK 4465XBK
| Cover
80
80
60606060606060
120120120120120
120120120120120120120
120120120120120120120
60
60
40
4265KOL14M24265KCS14M24265KBR14M2
4320KOL4320KCL4320KCS4320KF4
4221IBK10XX
4221EBK15G2
DC4221EZB30DF
DC4221IZB30DF
Code
4255XOL4255KOL14M24255KCS14M24255KCL14M24255KBR14M2
| KIT OF PROTECTION
OLCSBR
OLCLCSF4
Finishing
OLCSCLBR
Protector Scudo
Escutcheon 62x82 mm, hole 50 mmwith plastic support, to combine with universalprotector Ø 50 mm art. 4250XZT25M5
Protector for grate, internal 35x75x10 mm black
Protector for grate, external 35x75x15 mm black
External thickness, galvanized for protector grate
Internal thickness, galvanized for protector grate
Description
Protector Topsicur
INTERNAL
EXTERNAL
505050
120120120120
50505050
41
Double ward protector for safety doors and frames endowed with Securemme lock. Anti-drilling steel body, Ø 46 mm, interspace 38 mm. Height 27 mm. Black finishing.
X
X
LINE
4224
Protector= 4224 |Escutcheon= 4300 | Plate= 4505
INSTRUCTIONS FOR USE OF DOUBLE WARD PROTECTOR
KEY INVERTICAL POSITION
1
INSERT THE KEYINTO THE PROTECTOR
2
TURNTHE KEY ON 90°
3
INSERT THE KEYINTO THE LOCK
4
TURN THE KEY TOCLOSE THE BOLTS
5
4300KOL4300KPV4300KOS4300KCL4300KCS4300KF14300KF34300KF44300KF54300KF9
Escutcheon 62x82 mm, hole Ø 46 mm. with plastic supportto combine with double ward protector.
4505KOL4505KPV4505KOS4505KCL4505KCS4505KF14505KF34505KF44505KF54505KF9
Plate 62x170 mm, hole Ø 46 mm with plastic support to combinewith double ward protector.
| DOUBLE WARD PROTECTOR
|CODING EXAMPLE
FEATURESK= |kitE= |external
E
Code Description
4224EBK27MX4224ECL27MX4224EOL27MX Double ward protector Ø 46 x h 27 mm. interspace 38 mm.
OLPVOSCLCSF1F3F4F5F9
OLPVOSCLCSF1F3F4F5F9
Finishing
BKCLOL
FINISHING
BK
INTERSPACES HOLES DEFENDER
M
M=interspace 38 mm.
H. DEFENDER27
27
120120120120120120120120120120
60606060606060606060
606060
42
Line Description
FINISHING
OL
LINE T
4300
Escutcheons, plates= 4300450545064509
| Inserts
4300KOL4300KPV4300KOS4300KCL4300KCS4300KF14300KF34300KF44300KF5
Internal/external plate 62x82 mm, hole 46, including plastic support. To combine withlocks line 25 double ward heart, 24 and line 26.OPTIONAL: inserts 4000XBK, 4001XBK, 4000UBK, 4001UBK, 4010XBK,4015XBK11, 4020XBK16, 4021XBK16, 4030XBK and protector Blindo 4246XZT.
4300KOL
4300KOL+4246XZT
4300KOL+4000XBK 4300KOL+4001XBK 4300KOL+4000UBK 4300KOL+4001UBK 4300KOL+4010XBK 4300KOL+4011XBK
4300KOL+4030XBK4300KOL+4021XBK164300KOL+4020XBK164300KOL+4015XBK114300KOL+4012XBK
4506KOL4506KPV4506KOS4506KCL4506KCS4506KF14506KF34506KF44506KF5
Internal/external plate 62x170 mm, hole 46, including plastic support and adaptersfor handle Ø 15,16,18 e niplex M10.To combine with locks line 25 universal only for cylinder heart and line 26.OPTIONAL: inserts 4010XBK, 4015XBK11 and protector Blindo 4246XZT.
4506KOL+4246XZT4506KOL+4015XBK114506KOL+4012XBK4506KOL+4011XBK4506KOL+4010XBK
4505KOL4505KPV4505KOS4505KCL4505KCS4505KF14505KF34505KF44505KF5
Internal/external plate 62x170 mm, hole 46, including plastic support and adaptersfor handle Ø 15,16,18 e niplex M10.To combine with locks line 25 universal only for double ward heart and line 24.OPTIONAL: inserts 4000XBK, 4001XBK, 4000UBK, 4001UBK, 4021XBK16.
Look out: all finishings are also available for EASY MASTER heart. Line 4318. Prices unchanged.
4505KOL
4506KOL
4505KOL+4021XBK164505KOL+4001UBK4505KOL+4000UBK4505KOL+4001XBK4318KOL+4000XBK4505KOL+4000XBK
|CODING EXAMPLE
FEATURESX= |empty fieldK= |kitU= |universal
K
| ESCUTCHEONS LINE T
Finishing
OLPVOSCLCSF1F3F4F5
OLPVOSCLCSF1F3F4F5
OLPVOSCLCSF1F3F4F5
| Finishing legend on page 3
120120120120120120120120120
606060606060606060
606060606060606060
43
Line Description
Without hole for handle
4509KOL4509KPV4509KOS4509KCL4509KCS4509KF14509KF34509KF44509KF5
Escutcheons 62x170 mm, hole 46, including plastic support without hole forhandle. To combine with locks line 251 and 241. Predisposition for inserts4000XBK, 4001XBK, 4021XBK16.
Look out: all finishings are also available for EASY MASTER heart. Line 4318. Prices unchanged.
4509KOL+4000XBK 4509KOL+4001UBK 4509KOL+4010XBK4509KOL+4000UBK4509KOL+4001XBK 4509KOL+4030XBK4509KOL+4015XBK114509KOL+4012XBK4509KOL+4011XBK 4509KOL+4246XZT
4000XBK
4000UBK
4001XBK
4001UBK
4010XBK
4011XBK
4012XBK
4015XBK11
4020XBK16
4021XBK16
4030XBK
Double ward flat insert for escutcheons line 4300, 4505
Double ward universal flat insert black
Double ward concave insert for escutcheons line 4300, 4505
Double ward universal concave insert black
Cylinder insert for escutcheons line 4300, 4506
Concave cylinder insert for escutcheons line 4300, 4506
Bent cylinder insert for escutcheons line 4300, 4506
Knob cylinder insert for escutcheons line 4300, 4506
Flat handle insert for escutcheons line 4300
Convex handle insert for escutcheons line 4300
Limiting device insert for escutcheons line 4300
4000XBK
4001XBK
4010XBK
606060606060606060
4000KOL4000KOS4000KCL4000KCS4000KF14000KF4
Double ward metal flat insert for escutcheons line 4300, 4505, 4509.
4015XOL4015XCL4015XCS4015XF14015XF4
Knob cylinder metal insert for escutcheons line 4300, 4506, 4509.
4509KOL
4010XOL4010XOS4010XCL4010XCS4010XF14010XF4
Cylinder metal insert for escutcheons line 4300, 4506, 4509.
4030XOL4030XCL4030XCS4030XF14030XF4
Limiting device metal insert for escutcheons line 4300, 4506, 4509.
| ESCUTCHEONS LINE T
Finishing
OLPVOSCLCSF1F3F4F5
BK
BK
BK
BK
BK
BK
BK
BK
BK
BK
BK
OLOSCLCSF1F4
OLCLCSF1F4
OLOSCLCSF1F4
OLCLCSF1F4
| Finishing legend on page 3
44
| ESCUTCHEONS LINE O
Line Description
4050XBK
4051XBK
4060XBK
4065XBK
4071XBK18
4080XBK
Double ward flat insert for escutcheons line 4510KOL and 4310KOL
Double ward concave insert for escutcheons line 4510KOL and 4310KOL
Cylinder insert for escutcheons line 4510KOL and 4310KOL
Knob cylinder insert for escutcheons line 4510KOL and 4310KOL
Convex black nylon handle insert for escutcheons line 4310KOL
Limiting device insert for escutcheons line 4310KOL
4050XBK
4065XBK
LINE O
4310
| Escutcheons= 43104307
| Plates= 45104507
Round escutcheon, adapters for handle, key-guide, inserts
FEATURESX=
empty fieldK= |kit
K
4310KOL4310KCL4310KCS4310KF14310KF34310KF44310KF5
External escutcheons 62x82 mm, buttonhole 42x50, including plasticsupport. To combine with locks line 25 universal for double ward orcylinder heart.OPTIONAL: inserts 4050XBK, 4060XBK, 4065XBK, 4071XBK18,4080XBK and protector line “Ovale” 4242XZT.
4310KOL+4242XZT4310KOL+4071XBK184310KOL+4080XBK4310KOL+4065XBK4310KOL+4060XBK4310KOL+4051XBK4310KOL+4050XBK
4510KOL4510KOS4510KCL4510KCS4510KF14510KF34510KF44510KF54510KF9
Internal/external plate 62x170 mm, buttonhole 42x50, including plasticsupport and adapters for handle Ø 15,16,18 and niplex M10. To combinewith locks line 25 universal for double ward or cylinder heart.OPTIONAL: inserts 4050XBK, 4060XBK, 4065XBK, 4071XBK18,4080XBK and protector line “Ovale” 4242XZT.
4510KOL+4050XBK 4510KOL+4051XBK 4510KOL+4060XBK 4510KOL+4065XBK 4510KOL+4242XZT
|CODING EXAMPLE
FINISHING
OL
Finishing
BK
BK
BK
BK
BK
BK
OLCLCSF1F3F4F5
OLOSCLCSF1F3F4F5F9
| Finishing legend on page 3
120120120120120120120
606060606060606060
45
| ESCUTCHEONS
Line Description Finishing
4307XOL4307XCL4307XCS4307XF14307XF34307XF4
External keyboard escutcheons 62x82 mm, includingplastic support, for electromechanical lock line 27
4922KF34922KF14922KF34922KF4
Internal and external cylinder key aluminiumescutcheons 45x65
4921KF14921KF34921KF4
Internal and external double ward key aluminiumescutcheons 45x65 mm with key-hole of the lock
4921KF3
4507KOL4507KCL4507KCS4507KF14507KF34507KF4
Internal plate 62x170 mm complete of plastic supportfor electromechanical locks line 27
4507KOL
IN5000XBKXXXX
GC2500XBKXX05
Adapters for handle Ø 15,16,18 e niplex M10.
Groups 5 pieces extendible 5 mm key-guide for double ward key
GC2500XBKXX05
4755XOL4755XCL4755XCS4755XF14755XF34755XF4
PL4755XBK14XX
Round escutcheon Ø 55x7 mm hole 16 mm
4755XOL
Plastic support for round escutcheon 50x7 mm for door knob.
PL4755XBK14XX
4752XOL4752XCL4752XCS4752XF14752XF34752XF4
PL4752XBK16ML
PL4752XBK18ML
Round escutcheon for handle Ø 52x10 mm hole 24
Plastic Ø 52x10 hole 16 border 21 spring right/left
Plastic Ø 52x10 hole 18 border 21 spring right/left
PL4752XBK18ML
4752XOL
IN5000XBKXXXX
| Finishing legend on page 3
OLCLCSF1F3F4
F1F3F4
F1F3F4
OLCLCSF1F3F4
BK
BK
OLCLCSF1F3F4
OLCLCSF1F3F4
BK
BK
46
| KITS FOR SAFETY DOORS
MODEL
5000
| Handle= 5000500150205021
| Little handle= 5060 | Half moon= 5030 | Little knob= 5050 | Passerby tool= 5100 | Square= 5110
| Niplex= 513
FINISHING
OL
FEATURESX=
campo vuotoK= |kit
X
Code Description
5000XOL5000XOS5000XCL5000XCS5000XF15000XF35000XF4
Assembly example of handle5000XOL
HANDLE TIZIANA
5001XOL5001XCL5001XCS5001XF15001XF35001XF4
Assembly example of egg handle5001XOL
EGG HANDLE
5020XOL5020XOS5020XCL5020XCS5020XF15020XF35020XF4
7020XZB20XX
Assembly example knob Ø 655020XOL
KNOB Ø 65 mm
Fixing plate
5021XOL5021XCL5021XCS5021XF15021XF4
7020XZB20XX
Assembly example knob Ø 755021XOL
8 8 8 8 8 8 8
ØØ
8 8 8 8 8 8
8-M10 8-M10 8-M10 8-M10 8-M10 8-M10 8-M10
M10
8-M10 8-M10 8-M10 8-M10 8-M10
M10
KNOB Ø 75 mm
Fixing plate
|CODING EXAMPLE
Finishing
OLOSCLCSF1F3F4
OLCLCSF1F3F4
OLOSCLCSF1F3F4
ZB
OLCLCSF1F4
ZB
For examples of kit composition see page 48, 49
For examples of kit composition see page 48, 49
For examples of kit composition see page 48, 49
For examples of kit composition see page 48, 49
10 - 5010 - 5010 - 5010 - 5010 - 5010 - 5010 - 50
10 - 5010 - 5010 - 5010 - 5010 - 5010 - 50
5 - 255 - 255 - 255 - 255 - 255 - 255 - 25
5 - 25
5 - 255 - 255 - 255 - 255 - 25
5 - 25
47
| KITS FOR SAFETY DOORS
Code Description
5030XOL5030XCL5030XCS5030XF15030XF35030XF4
Half moon for cylinder5030XOL
5031XOL5031XCL5031XCS5031XF15031XF35031XF4
Half moon for opening limiting device 8 LAPM and for cylinder Ø 9
5031XOL
5060XOL5060XCL5060XCS5060XF15060XF35060XF4
Little handle for opening limiting devicewith escutcheon 30x60 mm
5060XOL
5030XBKHalf moon for cylinder in black nylon
5030XBK
5100XZB01205100XZB01405100XZB0160
5110XZB00555110XZB00655110XZB00805110XZB0090
5120XZB01005120XZB01105120XZB0120
5130XOT0016
Passerby tool
Expansion square
Square + niplex M10
Niplex M10
5100XZB
5110XZB
5130XOT0016
5120XZB
5061XOL5061XCL5061XCS5061XF15061XF35061XF4
Little handle for opening limiting device,escutcheon 55X8 with expansion square 8x55 mm.
5061XOL
5050XOL5050XCL5050XCS5050XF15050XF35050XF4
Little knob for limiting device 5731UCR033XXX18
5050XOL
Ø 8 8Ø 8 8Ø 8 8Ø 8 8Ø 8 8Ø 8 8
8 - Ø 9 8 - Ø 9 8 - Ø 9 8 - Ø 9 8 - Ø 9 8 - Ø 9
8 8 8 8 8 8
Ø 8 8
8x120 8x140 8x160
8x55 8x65 8x80 8x90
8x100 8x110 8x120
M10
8 8 8 8 8 8
Ø 9Ø 9Ø 9Ø 9Ø 9Ø 9
ØØ
| Finishing legend on page 3
Finishing
OLCLCSF1F3F4
OLCLCSF1F3F4
OLCLCSF1F3F4
ZBZBZB
ZBZBZBZB
ZBZBZB
OT
OLCLCSF1F3F4
OLCLCSF1F3F4
BK
48
Code Description FinishingØØ
| EXAMPLES FOR KNOB KIT COMPOSITION
8-M10 8-M10 8-M10 8-M10 8-M10 8-M10
5020KOLROMA5020KCLROMA5020KCSROMA5020KF1ROMA5020KF3ROMA5020KF4ROMA
OLCLCSF1F3F4
Middle door knob kit line Owith round escutcheon Ø 50x7 mm
5020KOLROMA
OLOSCLCSF1F3F4
8-M10 8-M10 8-M10 8-M10 8-M10 8-M10 8-M10
5020KOLBARI5020KOSBARI5020KCLBARI5020KCSBARI5020KF1BARI5020KF3BARI5020KF4BARI
Middle door knob kit line Twith escutcheon Ø 62x82 mm
5020KOLBARI
| KNOB KIT BARI
| KNOB KIT COMO
| KNOB KIT ROMA
| KNOB KIT RIVA
| ACCESSORIES KIT
| Chose among the different possible combinations and
49
| EXAMPLES FOR HANDLE KIT COMPOSITION
| HANDLE KIT COMO
| HANDLE KIT PISA | HANDLE KIT ROMA
| HANDLE KIT FANO
| HANDLE KIT ASTI
| HANDLE KIT BARI
| HANDLE KIT RIVA
| ACCESSORIES KIT
| Chose among the different possible combinations and
50
| Lever switch 1 bolt.
Code
5611DCR03XXX155611SCR03XXX155611DCR03XXX175611SCR03XXX175611DCR03XXX185611SCR03XXX185611DCR43XXX155611SCR43XXX155611DCR43XXX175611SCR43XXX175611DCR43XXX185611SCR43XXX18
P/LP/L
LLLLLLLLLLLL
404040404040303030303030
80
65
Ø18
Ø6
S 20-25-30-40
H
H2
35 50
MAX 40
LINE
560
|Switches= 560561562563
Limiting device=564 5711565 5721
PROJECTION03= 3 43= 43
03
H.H.14151718
14
SPACEX
X
INTERSPACE (model 2/3 bolts)
37= 37 50= 50 53= 53 56= 56 XX=
for 1 bolt
XX
| Plate switch 1 bolt.
80
S
65
Ø6 Ø18
24
H
H2
30
Code
5600DCR03XXX145600SCR03XXX145600DCR03XXX175600SCR03XXX175600DCR43XXX145600SCR43XXX145600DCR43XXX175600SCR43XXX17
P/LP/L
PPPPPPPP
5050505040404040
Switch left, fixing P
| Lever switch 2 bolts.
Code
5621DCR0337X155621SCR0337X155621DCR0337X175621SCR0337X175621DCR0337X185621SCR0337X185621DCR0350X175621SCR0350X175621DCR4337X155621SCR4337X155621DCR4337X175621SCR4337X175621DCR4337X185621SCR4337X18
P/LP/L
LLLLLLLLLLLLLL
6580
8737
Ø6
20-25-30-40
S72
HH2
MAX 40
Ø18
90
102
20
77
Ø8,227
30= =
120
50
Ø18
3
9
30
| Big switch 2 bolts interspace 50 mm
Code
5630DCR0350X155630SCR0350X15
SS
333333434343434343
SS
333343434343
SS
33333333434343434343
SS
33
II
3737373737375050373737373737
II
3737
P/LP/L
LL
HH
1515171718,518,51515171718,518,5
HH
1414171714141717
1515171718,518,517171515171718,518,5
HH
HH
1515
H2H2
303032323434292932323434
H2H2
2929323229293232
H2H2
3030323234343232303032323434
H2H2
3030
| SWITCHES|CODING EXAMPLE
FIXING
0
0=planar
1=lateral
3=frontal
BOLT FINISHINGCR=
Chromed
CR
HANDD= | rightS= | leftU=
universal
D
Hand
DXSXDXSXDXSXDXSX
Hand
DXSXDXSXDXSXDXSXDXSXDXSX
Hand
DXSXDXSXDXSXDXSXDXSXDXSXDXSX
Hand
DXSX
Switch left, fixing L
Switch left, fixing L
2020202020202020151515151515
2020
51
| Big switch 1 bolt.
Code
5640DCR03XXX155640SCR03XXX155641DCR03XXX185641SCR03XXX18
P/LP/L
PPLL
SS
3333
HH
151518,518,5
H2H2
30303434
20202020
102,7117
70 90
SØ18
H2H
Ø6
91,520
30
8,2
| Big switch 2 bolts with frontal.
Code
5653DCR0353X155653SCR0353X15
P/LP/L
FF
SS
33
HH
1515
H2H2
3030
1515
II
5353
35
240
19
5390
91,5
70
102,7
117
Ø8,2
30
20
2,5
Ø6
Ø5,5
Switch left, fixing F | Big switch 3 bolts
Code
5680DCR0356X155680SCR0356X15
SS
33
II
5656
P/LP/L
PP
HH
1515
H2H2
3030
90
150H
H2
30
20
Ø8,2
20
3 Ø6,1Ø8,2
120
140
27
1037
60
28
30==
Ø18
56
30
28
60 56
53
S
70 90
102,7118 H2
H
Ø18
91,5
Ø6
20
30 Ø8,2
| Big switch 2 bolts.
Code
5650DCR0353X155650SCR0353X155651DCR0353X185651SCR0353X185650DCR4353X155650SCR4353X155651DCR4353X185651SCR4353X18
P/LP/L
PPLLPPLL
SS
333343434343
II
5353535353535353
H2H2
3030343430303434
2020202020202020
HH
151518,518,5151518,518,5
S
30
53
H2150
90
Ø18
20
HØ8,2
| SWITCHES
Hand
DXSXDXSX
DXSXDXSXDXSXDXSX
Hand
Hand
DXSX
Hand
DXSX
Switch left, fixing P
Switch left, fixing L
Switch left, fixing L
Switch left, fixing P
1515
52
| LIMITING DEVICES
| Night service.
Code
5701DCR06XXX155701SCR06XXX155701DCR06XXX175701SCR06XXX175701DCR06XXX185701SCR06XXX18
P/LP/L
LLLLLL
SS
999999
HH
1515171718,518,5
H2H2
303032323434
3030303030
| Limiting device fixed point.
Code
5711DCR03XXX155711SCR03XXX155711DCR03XXX175711SCR03XXX175711DCR03XXX185711SCR03XXX18
P/LP/L
LLLLLL
SS
999999
HH
1515171718,518,5
H2H2
303032323434
3030303030
| Accessories to be order apart. (see following page)*
| Switch moving point and night service.
Code
5721DCR03XXX155721SCR03XXX155721DCR03XXX175721SCR03XXX175721DCR03XXX185721SCS03XXX18
P/LP/L
LLLLLL
SS
999999
HH
1515171718,518,5
H2H2
303032323434
| Limiting device.
65
80
35 50
H2H
Ø6Ø18
M6
S
73
50
Ø18
H
H2
8
S
73
50Ø18
H
H2
8
73
50
8
S
H2
H
Ø18
27
Night service SX, fixing L
Limiting device SX, fixing L
Limiting device SX, fixing L
Code
5731UCR03XXX18
PR5730XXX40P6
PR5730XXX50P6
P/LP/L
L
SS
3
HH
18,5
H2H2
34 25
25
25Hub Ø 9x35 mm for pivot P6LA
Hub Ø 9x50 mm for pivot P6LA
Hand
U
Hand
DXSXDXSXDXSX
Hand
DXSXDXSXDXSX
Hand
DXSXDXSXDXSX
303030303030
53
Code Description
CP5710DCRXXLACP5710SCRXXLA
VT57M8XZB18CP
DA5710XZBXXM8
CP5740DCRXXLACP5740SCRXXLA
VT57M8XZ20CP
DA5710XZBXXM8
CP5730DCRXXLACP5730SCRXXLA
VT57M8XZB17CP
DA5710XZBXXM8
CP2540DCRXXLACP2540SCRXXLA
VT57M8XZB20CP
DA5710XZBXXM8
Right/left-hand striking plate for limiting device chromed
Galvanized screw Ø18x17,5 mm for limiting device
Hub M8 self-blocking
Right/left-hand striking plate for limiting device chromed
Galvanized screw Ø18x17,5 mm for limiting device
Hub M8 self-blocking
Right/left -hand striking plate for limiting device chromed finishing
Galvanized screw Ø15x17,1 mm
Hub M8 self-blocking
Right/left -hand striking plate for limiting device chromed finishing
Galvanized screw M8x20
Hub M8 self-blocking
R7,4R13
Ø10,7
Ø18,1
100,
5
51,5
131
2
4
117
62,5
141
4
2,5
29
Ø11,6
2
4,8
130
51,7
100
35
106
28
80
3,6
2
38,5Ø11,8
Ø25,5
5870XDKXXAR
5880XDKXXAR
5850XDKXXAR
5860XDKXXAR
5803XZB1008
5818XZB10GN
Rod Ø18 adjustable from 320 to 500 mm, vertical closing
Rod Ø18 adjustable from 830 to 1485 mm, vertical closing
Rod Ø 14 adjustable from 470 to 750 mm for switch
Rod Ø 14 adjustable from 725 to 1000 mm for switch
Threaded rod Ø 10x1150 mm with coupling M8 for art. 2003-2008-2013-2102-2103
Hooking rod Ø 10x1150 mm for art. 2018-2022
| ACCESSORIES
54
Code Description
7025XDK30M5
7026DDK30M5
7026SDK30M5
7030DDK30
7030SDK30
7040XDK30
Fixing plate to weld 134x206x3 mm for double ward lock line 25
Fixing plate 134x206x3 mm for European cylinder lock right for tear-proof protector art. 4260XZT
Fixing plate 134x206x3 mm for European cylinder lock left for tear-proof protector art. 4260XZT
Fixing plate right 134x276x3 mm for double ward lock+ cylinder look or double cylinder andtear-proof protector art. 4260XZT
Fixing plate left 134x276x3 mm for double ward lock + cylinder lookor double cylinder and tear-proof protector art. 4260XZT
Fixing plate to weld 119x98x3 mm for switch
| To combine on safety doors looks to get class 7 UNI EN 12209*
7025XDK30M5
70
50
56
20
206
5MA
134
108
3
178
Assembly example
7026DDK30M5
Ø 50
206
1343
Ø62
1,5
M5
178
108
7164XAC10XX 7165XAC10XX 7142XAC10XX
Ø60,4
130
198
1
*
7164XAC10XX
7166XAC10XX
7165XAC10XX
7142XAC10XX
7124XCN20XX
7125XCN20XX
7126XCN20XX
Antidrilling double ward hardened plate 130x198x1mm durity 50/53 HRC
Antidrilling cylinder hardened plate 130x198x1mm durity 50/53 HRC
Antidrilling universal hardened plate 130x198x1mm durity 50/53 HRC
Antidrilling protector hardened plate 130x198x1mm durity 50/53 HRC
Antidrilling plate 60x78x2 mm
Antidrilling plate 50x70x3 mm
Antidrilling plate 80x73x2 mm
*
* 7142XAC10XX
7166XAC10XX
| ACCESSORIES
55
Code
5800XZT15XX
5800XZT22XX
PU5803XZB08AS
PU5818XZB10AS
PU5818XZB12AS
PU5818XZB14AS
5910XZB1820
Floor socket Ø 15 mm for art. AA1 and art. AA2
Floor socket Ø 22 mm for art. AA1 and art. AA2
Pivot for rod fixing
Anti-drilling pivot Ø 10 mm for rod art. 5803 and art. 5818
Anti-drilling pivot Ø 12 mm for rod art. 5803 and art. 5818
Anti-drilling pivot Ø 14 mm for rod art. 5803 and art. 5818
Tear-proof gard Ø 18 mm. with threaded M10.
5910XZB1820
AS2503KZBXXGN
AS2504XZBXX08
AC2600KZAXXXX
SQ2500XDK25AU
SQ2501XDK2006
ALDVG
Pair of leap rods
Leap rod
Tab in steel + screw for cylinder fixing
Tab for safety doors locks fixing
Tab for safety doors locks fixing
Tab for switches fixing
AS2503KZBXXGN
AC2600KZAXXXX3
31,3
41,8
7300XBKXX28Cap for frame. Gap requested 25x25 mm.
7200UCR
5 mm latch-adjustment. Chromium-plated. Frame gap 30x26 mm.
SQ2260XZB1205
7011XZB20MZ
7020XZB20XX
Fixing plate to weld 205x65x1,5 mm, galvanized finishingfor double ward locks for rolling shutter
Fixing plate to weld 83,5x79x2 mm, galvanized finishing
Fixing plate for knob Ø 40x2,5, galvanized finishing
7011XZB20
Ø36,6
83,5
79
2
3
65
55,5
| ACCESSORIES
Description
56
Code Description
FR2500XCRXX28
FR2500XCRXX37
FR2510XCRXX28
FR2510XCRXX37
FR2530XCRXX28
FR2530XCRXX37
FR5653XCRXX53
Frontal 35x356x3 mm, interspace 28, chromed finishing
Frontal 35x356x3 mm, interspace 37, chromed finishing
Frontal 35x356x3 mm, interspace 28, chromed finishing
Frontal 35x356x3 mm, interspace 37, chromed finishing
Frontal 35x356x3 mm, interspace 28, chromed finishing
Frontal 35x356x3 mm, interspace 37, chromed finishing
Frontal 35x240x3 mm, chromed finishing
FR2500XCRXX28
CP5650XCRXX53Striking plate big switch 2 bolts 27x114x3 mm, chromed finishing
CP2500XCRXX28
CP2500XCRXX37
CP2530XCRXX28
CP2530XCRXX37
CP2500XCRXX37Striking plate 35x230x2,5 mm chromed finishing
Striking plate 35x230x2,5 mm chromed finishing
Striking plate 35x230x2,5 mm chromed finishing
Striking plate 35x230x2,5 mm chromed finishing
CP2000XZB
CP2001XZB
CP2008XZB
CP2017XOT
CP2017XZB
CP2020XOT
CP2020XCR
CP2025XOT
CP2025XCR
Striking plate 22x180x2,5 mm galvanized finishing
Striking plate 22x180x2,5 mm, galvanized finishing
Striking plate 25x150x2,5 mm, galvanized finishing
Striking plate 25x245x2,5 mm brass finishing
Striking plate25x245x2,5 mm galvanized finishing
Striking plate25x230x2,5 mm brass finishing
Striking plate 25x230x2,5 mm chromo finishing
Striking plate22x180x2,5 mm brass finishing
Striking plate 22x180x2,5 mm chromo finishing
CP2000XZB
3537
3725
19
21
24
230
2,5
811
4
27
Ø6,2
23
21
53
2,5
CP5650XCRXX53
| ACCESSORIES
57
Code Description
5500DCR00XX
5500SCR00XX
5500DCR03XX
5500SCR03XX
Security door strike right
Security door strike left
Door strike project. 3 mm (right)
Door strike project. 3 mm (left)
5201XBK25XXDouble ward key handle
5202XBK25XXCylinder key handle
5210XBK25XX
Swinging handle Loretta from zamak. Black finishing.Expansion square 8 mm. Size only 10 mm.
5528DCR00285528SCR00285528DCR03285528SCR03285537DCR00375537SCR00375537DCR03375537SCR0337
Door strike int. 28 mm right/left
Door strike proj. 3 mm int. 28 mm right/left
Door strike int. 37 mm right/left
Door strike proj. 3 mm int. 37 mm right/left
5200XBK25XXHandle
5220XBK4050Handle for frames in black nylon with head srew
| ACCESSORIES
58
0CVEXNISBOZKey 105x20,5x11,4 mm
Keys are designed in real dimensions. Lay the key on the picture to identify the model.
Code Description
0CVAXNISBOZ
Blank key for rolling shuttersand balancing doors58x20,5x11,4 mm
0CVCXNISBOZKey for safe 6 gorges
0CVBXNISBOZKey 68x20,5x11,4 mm
NK
Finishing
NK
NK
NK
| KEYS
105
Length
58
78
68
50
100
100
100
59
Code Description
0CAFXNISBOZKey for locks to apply
0CRBXNISBOZKey 73x23x11,4 mm
0CRMXNISBOZKey 73x23x11,4 mm
0CRCXNISBOZKey 88x23x15,3 mm
| KEYS
Finishing
NK
NK
NK
NK
Length
110
73
76
88
50
100
50
50
60
0CCGXNISBOZKey for safety doors
0CCIXNISBOZKey for safety doors
0CCHXNISBOZKey for safety doors
Code Description
0CF8XNISBOZKey for safe 8 gorges
NK
NK
NK
Finishing
NK
| KEYS
85
105
95
Length
79
50
50
50
50
61
IM0CC4XAZXXXX
IM0CC4XAZXXXX
SECUR CARD
0CC6XNISBOZ
0CC6XNICODE
Code
0CC4XNISBOZ
0CC4XNICODE
0CC5XNISBOZ
0CC5XNICODE
Key - cover for double ward blue
Key - cover for double ward red
Securmap property card
Securmap registered blank key for protected duplication
Key codified Securmap with registered duplication
Description
Securmap registered blank key for protected duplication
Key codified Securmap with registered duplication
Securmap registered blank key for protected duplication
Key codified Securmap with registered duplication
Black
Black
CARD
NK
NK
Finishing
NK
NK
NK
NK
| KEYS
-
-
105
105
Length
85
85
95
95
62
SPARE PARTS: HEARTS FOR UNIVERSAL LOCKS LINE 2525CX 25TX25MX 25KX
2599DZBXXXXHG32599SZBXXXXHG3
Code
2599DZBXXXXHI32599SZBXXXXHI3
2599DZBXXXXHH32599SZBXXXXHH3
HEART SPARE PART FOR SAFETY DOOR IN PRODUCTION FROM 1997 TO 2000.
| CODING EXAMPLE 25H | With double ward heart.
25SXDZBXXXXXXS46
6=7=
|3 + 1 T |5 + 1 T
| N. keys
6=
25SX 25SX25MX25CX25TX25KX
Line 25 Heart modelSecurmap | SecurmapEasy Master | Easy Master | Arranged for cylinder heart | Arranged for cylinder Securtina | KA site heart
25SX
+D=S=
| right | left
| Hand
D
+XXXXXX
+S= Securmap | Securmap
Model double ward keys
S
4=5=6=
85 (CV2500)95 (CV2502)105 (CV2501)
Key model for double ward heart
4
=
1515151515
+ZB= | galvanized whiteZB
4=85 5=95
6=105
+
Code
25SXDZBXXXXS4625SXSZBXXXXS4625SXDZBXXXXS4725SXSZBXXXXS4725SXDZBXXXXS5625SXSZBXXXXS5625SXDZBXXXXS5725SXSZBXXXXS57
Hand
DSDSDSDS
Stem keys
85 85 85 85 95 95 95 95
N. keys
3 + 1 T3 + 1 T5 + 1 T5 + 1 T3 + 1 T3 + 1 T5 + 1 T5 + 1 T
Right or left-hand heart spare part with 3 sealed 85 mm keys.
Right or left-hand heart spare part with 3 sealed 95 mm keys.
Right or left-hand heart spare part with 3 sealed 105 mm keys.
Description
| LISTE FOR MOST COMMON ARTICLES
63
CYLINDER KIT 26: for changing from double ward to cylinder lock | CODING EXAMPLE 26KTDF425
26KTDF425XX
26KT
+
25XX
=25XX35XX
H. DEFENDER
OL= | shiny brassPV= | PVDOS= | brassCL= | shiny chromiumCS= | satin chromiumF1= | silver aluminiumF3= | gold aluminiumF4= | bronzed aluminiumF5= | black aluminiumF9= | aluminium titanium
F4
+FINISHING
Prezzo base kit 26= 60,00 € | Standard price kit 26 = 60,00 €
25CXX
4510KOL
DC4246XZB10DF
4310KOL
4060XBK
4242XZT25M5
4065XBK
4142XOL
+OPENING DOOR HAND
DRS LD
D=S=R=L=
| push right | push left | pull right | pull left
Code
26KTDCL25XX26KTDCS25XX26KTDF425XX26KTDOL25XX26KTSCL25XX26KTSCS25XX26KTSF425XX26KTSOL25XX
Hand
DDDDSSSS
Finishing
CLCSF4OLCLCSF4OL
H defender
25 25 25 25 25 25 25 25
| LISTE FOR MOST COMMON ARTICLES
64
| DOOR VIEWERS
CodeA B C
Finishing View
014DXBR57XX014DXOL57XX014DXCL57XX014DXCS57XX
014DXBR60XX014DXOL60XX014DXBK60XX014DXCL60XX014DXCS60XX014DXWH60XX
014DXBR80XX014DXOL80XX014DXCL80XX014DXCS80XX
016CXBR40XX016CXOL40XX
016CXBR57XX016CXOL57XX016CXCS57XX
016CXBR60XX016CXOL60XX016CXCS60XX
016DXBR40XX016DXOL40XX016DXCL40XX016DXCS40XX
016DXBR60XX016DXOL60XX016DXBK60XX016DXCL60XX016DXCS60XX016DXWH60XX
016DXBR80XX016DXOL80XX016DXCL80XX016DXCS80XX
BROLCLCS
BROLBKCLCSWH
BROLCLCS
BROL
BROLCS
BROLCS
BROLCLCS
BROLBKCLCSWH
BROLCLCS
| Wide-angle | Wide-angle | Wide-angle | Wide-angle
| Wide-angle | Wide-angle | Wide-angle | Wide-angle | Wide-angle | Wide-angle
| Wide-angle | Wide-angle | Wide-angle | Wide-angle
| Usual | Usual
| Usual | Usual | Usual
| Usual | Usual | Usual
| Wide-angle | Wide-angle | Wide-angle | Wide-angle
| Wide-angle | Wide-angle | Wide-angle | Wide-angle | Wide-angle | Wide-angle
| Wide-angle | Wide-angle | Wide-angle | Wide-angle
Min Max
14 32 3014 32 3014 32 3014 32 30
14 32 3014 32 3014 32 3014 32 3014 32 3014 32 30
14 32 3014 32 3014 32 3014 32 30
16 32 2816 32 28
16 32 2816 32 2816 32 28
16 32 2816 32 2816 32 28
16 32 3016 32 3016 32 3016 32 30
16 32 3016 32 3016 32 3016 32 3016 32 3016 32 30
16 32 3016 32 3016 32 3016 32 30
57 - 9057 - 9057 - 9057 - 90
60 - 11060 - 11060 - 11060 - 11060 - 11060 - 110
80 - 12080 - 12080 - 12080 - 120
40 - 7040 - 70
57 - 9057 - 9057 - 90
60 - 11060 - 11060 - 110
40 - 7040 - 7040 - 7040 - 70
60 - 11060 - 11060 - 11060 - 11060 - 11060 - 110
80 - 12080 - 12080 - 12080 - 120
No
rmal
e|U
sual
Gra
ndan
go
lo|W
ide-
angl
e
LENGHT MIN./MAX.40= 40/7057= 57/9060= 60/11080= 80/120
40
LINE
014
014= Ø 14 016= Ø 16
XX
XX
HANDX
X
FINISHINGBR= | bronzedOL= | shiny brassCL= | shiny chromeCS= | satin chromeBK= | blackWH= | white
BR
|CODING EXAMPLE
FEATURESD= | Diamante 200°C= | Cantiere 160°
D
120120120120
120120120120120120
120120120120
120120
120120120
120120120
120120120120
120120120120120120
120120120120