Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
PROJECTS & DEVELOPMENT INDIA LTD
PNPM/PC150/E/112/SEC-VI-10.0
0
Document No Re
Sheet 1 Of 35
FORM NO: 02-0000-0021F1 REV2 All rights reserved
SECTION – VI-10.0
VENDOR LIST
PLANTS: CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR, PUMP HOUSE AND SERVICES
PROJECT: INTEGRATED COAL BASED FERTILISER COMPLEX AT TALCHER, ANGUL DISTRICT, ODISHA (INDIA)
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 2 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
1.0 CIVIL
GENERAL NOTES:
i. Only ‘First’ Quality materials shall be used
ii. OWNER / CONSULTANT reserve the right to choose any of the approved make / vendor as per this list. Make of the item not indicated and any other make for the specified item shall be subject to owner’s / consultant’s approval.
iii. Specifications of manufacturer’s items shall be checked against tender item / specifications
before selecting any product or brand name. In case of any discrepancy, tender item / specifications shall prevail, and any such brand of item shall not be used which is not conforming to tender specifications even if it is listed in this vendor list.
iv. In case of non-availability of any material among approved vendors / makes in a particular site / region, alternate vendor / make conforming to IS / BS etc. Shall be used subject to approval by OWNER / CONSULTANT.
SL. NO. ITEM NAME
1.0 FLOOR FINISHING
1.1 CEMENT TILES (FLOOR/WALL)
a) EUROCON b) ALTRA TILE PVT. LTD. c) DAZZLE
1.2 TERRAZZO TILES A) NITCO B) HINDUSTAN TILES
1.3 CERAMIC TILES
a. SOMANY CERAMICS b. H&R JOHNSON CERAMICS c. KAJARIA CERAMICS d. ORIENT CERAMICS
1.4 HEAVY DUTY FLOOR TILES
A) BHARAT TILES B) RESTILE CERAMICS C) PELICAN CERAMIC INDUS. D) PAVIT E) SONA TILES
1.5 INDUSTRIAL FLOOR HARDENER ADMIXTURE
a) PIDILITE INDUSTRIES b) SIKA c) CICO.
1.6 PVC ROLLS
A) PREMIER VINYL B) ARMSRONG INARCO C) RMG POLYVINYL
1.7 PVC TILES A) ARMSTRONG
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 3 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
1.8 PVC TILES/ROLL ANTISTATIC
A) PREMIER VINYL B) RMG POLYVINYL C) ARMSTRONG
1.9 ACID RESISTANT TILES(BATTERY ROOM)
A) H&R JOHNSON OR APVD. EQUIV.
1.10 MOSSAIC TILE
A) ITALIS B) SPECIFIC GLASS MUSSAIC INDIA LTD.
2.0 WOODWORK
2.1 FLUSH DOOR A) GREEN B) CENTURY DOORS C) KITPLY PRODUCTS
2.2 PLY WOOD/BLOCK BOARD A) CENTURY B) KITPLY PRODUCTS C) GREEN PLY
2.3 PARTICLE BOARD (EXTRA GRADE)
A) BHUTAN BOARD B) NOVAPAN INDIA LTD.
2.4 MDF BOARD/MD PARTICLE BOARD (EXTRA GRADE)
A) NUCHEM LTD. B) MANGALAM TIMBER PRODUCTS LTD. C) WESTERN BIO SYSTEMS LTD.
2.5 DECORATIVE LAMINATES
A) CENTURY B) GREENPLY INDUS. LTD. C) MERINO D) ARCHID
2.6 MARINE PLYWOOD
A) CENTURY B) GREENPLY INDUS. LTD. C) MERINO D) ARCHID
2.7.0 DOORS & WINDOWS FITTINGS
2.7.1 MORTICE LOCKS WITH HANDLES
A) GODREJ & BOYCE B) EVERITE AGENCIES (P) LTD. C) DOORSET
2.7.2 CYLINDRICAL PIN TUMBLER LOCK WITH KNOBS
A) GODREJ & BOYCE B) EVERITE AGENCIES (P) LTD. C) DOORSET
2.7.3 HYDRAULIC DOOR CLOSER (OVER HEAD/ FLOOR)
A) OZONE B) EVERRITE AGENCIES (P) LTD. C) HARDWYN
2.7.4 MISC. DOOR FITTINGS HINGLE, TOWER BOLTS, LATCHES,
A) EVERITE AGENCIES (P) LTD. B) EBCO DINSUTRIES
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 4 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
SOPPER, STAYS, ALDROPS ETC. D) OZONE E) HARDWYN
2.7.5 THREE WAY BOLTING LOCKING DEVICE HANDLE
A) SRIMA SALES & SERVICES B) DHIMAN INDUSTRIES
2.7.6 PANIC BAR LATCH (FOR EMERGENCY DOOR)
A) SRIMA SALES & SERVICE
2.7.7 UPVC WINDOWS A) FENESTA B) ENCRAFT C) WINDOW MAGIC
2.7.8 FASTENERS A) HILTI INDIA PVT. LTD. B) FISCHER
3.0 STEEL / ALUMINIUM DOORS, WINDOWS & VENTILATOR
3.1 PRESSED STEEL DOORS WINDOWS & SECTION DOORS WINDOWS/ROLLING SHUTTER
A) RAYMUS ENGINEERS B) DHIMAN STEEL C) RDG ENGINEERING D) SUPER STEEL WINDOW CO. E) SKS STEEL INDUS.
3.2 ALMUNIUM / DOORS/ WINDOWS SECTIONS
A) JINDAL ALUMINIUM LTD. B) HINDALCO INDUSTRIES C) INDAL
3.3 FIRE-PROOF DOORS(APPROVED)
A) NAVAIR INTERNATIONAL B) RDG ENGINEERING
3.4 PVC DOORS / WINDOWS A) SINTEX OR APPVD EQUIV. 3.5 PVC WATER TANKS A) SINTEX OR APPVD EQUIV. 4.0 PLASTERING
4.1 WATERPROOFING/ COMPOUND IN CEMENT PLASTER
A) STRUCTURAL WATER PROOFING CO. (P) LTD. B) PIDILITE INDUSTRIES C) SIKA
5.0 ROOF TREATMENT (WATER PROOFING)
5.1 BRICK BAT COBA A) INDIA WATER PROOFING CO. B) OVERSEAS WATERPROOFING CORPN.
5.2
CRYLIC BASED CEMENTATIOUS PRIMER COATING FOR ROOF WATERPROOFING
A) STRUCTURAL WATER PROOFING CO. (P) LTD. B) SIKA QUALCRETE LTD. C) PIDILITE INDUSTRIES
5.3 APP MODIFIED POLYMERIC WASTER PROOFING MEMBRANE
A) PIDILITE INDUSTRIES LTD. B) SIKA
6.0 PAINTING WORKS
6.1 PLASTIC EMULSION (INTERIOR/EXTERIOR)
A) ICI INDIA LTD. B) BERGER PAINTS LTD.
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 5 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
C) ASIAN PAINTS LTD. D) SHALIMAR PAINTS E) KANSAI NEROLAC PAINTS LTD.
6.2 DRY OILBOUND DISTEMBER A) ASIAN PAINTS LTD. B) KANSAI NEROLAC PAINTS LTD.
6.3 INDUSTRIAL / EXPOXY/ SYNTHETIC ENAMEL PAINTS
A) ICI/AKZO NOBEL INDIA B) BERGER PAINTS LTD. C) ASIAN PAINTS LTD. D) SHALIMAR PAINTS E) INTERNATIONAL MARINE COATINGS PVT. LTD. F) KANSAI NEROLAC PAINTS LTD. G) BOMBAY PAINT
6.4 WATERPROOFING CEMENT PAINT
A) KILLICK NIXON LTD. B) RAJDOOT PAINTS
6.5 WOOD MELAMINE POLISH A) ASIAN PAINTS B) SHALIMAR PAINTS C) WEMBLY PAINTS
6.6
WASTERPROOFING TRANSPARENT EXTERIOR WALL COATING (OVER PAINTED SURFACE)
A) PIDILITE INDUSTRIES B) SIKA
6.7 FIRE PROOF COATING A) NAVAIR INTERNATIONAL OR APPVD. EQUIV.
7.0 ROOFING SHEETS & ACCESSORIES
7.1 ASBESTOS SHEETS A) ETERNIT EVEREST LTD. B) CHARMINAR INDUSTRIES C) VISAKA
7.2 C.G.I. SHEETS
A) ISPAT INDUSTRIES LTD. B) STEEL AUTHORITY OF INDIA C) TATA STEEL D) JINDAL
7.3 PRECOATED G.I. PROFILE SHEETS FOR ROOFING & WALL CLADDING
A) ISPAT INDUSTRIES LTD. B) LLOYD INSULATION (I) LTD. C) STEEL AUTHORITY OF INDIA D) TATA STEEL E ) JINDAL
7.4 ALUMINIUM SHEET (PLAIN/PROFILE)
A) INDIAN ALUMINIUM CO. LTD. OR APPROVED EQUIVALENT
7.5 FIBRE GLASS SHEETS & A) SIMBA FRP (P) LTD.
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 6 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
PANELS (MACHINE MOULD)ED
B) GE INDIA C) DUROPLAST
7.6 PROOFING J/L HOOKS, BOLTS & OTHER ACCESSORIES (POLYMER COATED)
A) KATALIST CONSULTANT (P) LTD. B) ADVANCED MACHINE
8.0 SANITARY PLUMBING FITTINGS & FIXTURES
8.1 SANITARY FITTINGS (W.C. WASH BASIN, URINAL ETC.)
A) HINDUSTAN SANITARY WARE & INDUS. LTD. B) PARRYWARE SANITARY WARE C) MADHUSUDAN CERAMICS D) NYCER CERAMICS
8.2 PLUMBING FITTINGS & FIXTURES
A) JAGUAR B) CERA C) HINDWARE
8.3 GLASS/MIRROR (SHEET/ FLOAT/ TOUGHENED/ LAMINATION
A) GUJARAT GUARDIAN LTD. B) SAINT GOBAIN C) ASAHI FLOAT
8.4 GI PIPES
A) JINDAL B) SURYA C) PRAKASH D) SWASTIK
9.0 FALSE CEILING, FALSE FLOORING & UNDERDECK INSULATION
9.1 FLASE CEILING / WALL CLADDING (ALUMINIUM STRIP/ TRAY TYPE)
A) INTERARCH BUILDING PRODUCTS(P) LTD. B) HUNTER DOUGLAS C) MASCOT OVERSEAS
9.2 FALSE FLOORING
A) MULTI INTERIORS PVT. LTD. B) BESTLOCK SYSTEM & CONCEPTS C) LLOYD INDUSULATION (I) LTD. D) UNITED INSULATION E) A.R. & BROTHERS
9.3 UNDERDECK/WALL HEAT INSULATION
A) BAKELITE HYLAM LTD. B) U.P. TWIGA F.G. LTD. C) LLOYD INDULATION (I) LTD. D) SUPEREME
9.4 OVERDECK HEAT INSULATION
A) LLOYD INSULATION (I) LTD. B) BEST PLASTRONICS LTD.
9.5
GYPSUM BOARD TILES (FIBRE GLASS REINFORCED)/ PRIMA BOARD ARMSTRONG FALSE CEILING
A) SAINT GOBAIN
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 7 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
10.0
SPECIALITY PRODUCTS (CEMENT ADDITIVES/ ADMIXTURES/CORROSION INHIBITORS/ SURFACE TREATMENT/ GROUT & ANCHORS/SEALING/ COASTING
A) PIDILITE INDUSTRIES B) SIKA
10.1 EPOXY FLOOR COATING (BATTERY ROOM)
A) SIKA B) FAIRMATE
11.0 MISCALLANEOUS ITEMS
11.1 WOOD PRESERVATIVE A) ASCU HICKSON LTD.
11.2 WALL SURFACE TEXTURED COATING
A) JOTUN B) SPECTRUM PAINTS C) BAKELITE HYLAM D) OIKOS
11.3 PVC PLUMBING FITTINGS
a) SUPREME b) POLYPAC c) ASTROL
11.4 REINFORCED FIBRE GLASS WATERPROOFING FELT
A) SIKA B) U.P. TWIGA F.G. LTD.
11.5 ANTI TERMITE TREATMENT
A) PCI OR APPRVD EQUIV.
11.6 MATERIAL TEST HOUSE A) IIT MADRAS B) GOVT APPROVED AGENCY
12.0 CEMENT
A) ACC B) J K CEMENT C) BINANI CEMENT D) JP CEMENT E) GUJARAT AMBUJA F) ALTRA TECH CEMENT G) BIRLA CORPN. LTD. H) GRASIM I) SHREE
12.1 SULPHUR RESISTANT CEMENT A) SAURASHTRA CEMENT LTD. B) SHREE DIGVIJAY CEMENT
13.0 RCC DESIGN MIX AP GOVT APPROVED AGENCY
14.0 WRAPPING COATING (I/C TAPE & PRIMER) IWL OR APPROVED EQUIPMENT
A) IWL OR APPROVED EQUIVALENT
15.O FIRE PROOFING MATERIAL A) CAFCO B) CARBOLINE
16.0 STRUCTURAL STEEL / CS PLATE HEAVY SECTIONS MORE THAN 150 MM A) SAIL
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 8 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
B) TATA STEEL C) RINL LIGHT SECTIONS LESS THAN 150 MM D) JINDAL E) ESSAR F) ISPAT INDUSTRIES
16.1 MS PIPES (HAND RAIL APPLICATION)
a) SURYA b) PRAKASH c) JINDAL
17.0 TIMT BAR / REBAR A) SAIL B) TATA STEEL C) RINL
18.0 GRATINGS/HANDRAILS
A) INDIANA GRATINGS B) WESTCOAST ENGINEERING C) GREATWELD GRATING D) KANADE ANAND UDYOG
19.0 WELDING ELECTRODE
A) ADOR B) ESAB C) D & H D) HANOVAR
2.0 ROTATING EQUIPMENT :
SL.NO VENDOR’S NAME
COUNTRY
PUMPS FOR WATER SERVICE (VERTICAL)
1. FLOWMORE PVT. LTD INDIA
2. JYOTI LIMITED INDIA
3. KIRLOSKAR BROTHERS LTD. INDIA
4. MATHER & PLATT (INDIA) LTD. INDIA
5. KSB PUMPS LIMITED INDIA
6. AKAY INDUSTRIES PVT LTD INDIA
7. KISHORE PUMPS PVT LTD INDIA
8. SAM TURBO INDUSTRIES PVT LTD INDIA
EOT CRANES
1. W.H. BRADY & CO. LTD INDIA
2. AVON CRANES PVT. LTD. INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 9 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
3.0 MECHANICAL – PIPING
3. THE ACME MANUFACTURING CO. LTD INDIA
4. WMI CRANES INDIA
5. SAMCO ENGINEERING PVT. LTD INDIA
CS WELDED PIPES TO API 5L SPIRAL LONG. WELDED SL.NO VENDOR’S NAME COUNTRY
1 HEAVY METAL PIPE CENTRE (UPTO 24" (UPTO SCHXXS) INDIA
2 JINDAL PIPES LTD. (2” TO 14”) INDIA
3 JOTINDRA STEEL & TUBES LTD. (½" TO 14") INDIA
4 KALPESH TUBE(INDIA), (TRADER) INDIA
5 LALIT PIPES & PIPES LTD.. (16" to 64" thickness upto 20mm) INDIA
6 MUKAT PIPES LTD. INDIA
7 P.K.FORGE & FITTING INDUSTRIES INDIA
8 PRATIBHA INDUSTRIES LTD. (16" to 24" thickness 6mm to 14.27mm)
INDIA
9 RATNAMANI METALS & TUBES LTD. INDIA
10 SAGAR STEEL CORPORATION (TRADER) INDIA
11 SAIL INDIA
12 SURINDRA ENGINEERING CO. PVT. LTD. INDIA
13 SURYA ROSHINI LTD (GR. A 3” TO 4”, GR. B, 6” TO 14”) INDIA
14 THE BENGAL MILL STORES SUPPLY CO.(TRADER) INDIA
15 WELSPUN GUJARAT STAHL ROHREN LIMITED (FOR ANJAR AND DAHEJ PLANTS) (UPTO 72” 50 MM THK FOR DAHEJ PLANT AND UPTO 100” 30 MM THK. FOR ANJAR PLANT.)
INDIA
16 PHOCEENNE FRANCE
17 ETS TROUVAY & CAUVIN FRANCE
18 MANNESMANN HANDEL AG GERMANY
19 THYSSEN-KRUPP STAHLUNION GMBH GERMANY
20 DALMINE SPA ITALY
21 RACCORTUBI SRL ITALY
22 KOSEI SANGYO LTD JAPAN
23 MARUBENI ITOCHU STEEL JAPAN
24 MITSUBISHI CORPORATION JAPAN
25 NIPPON KOKAN JAPAN
26 NIPPON STEEL CORPORATION JAPAN
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 10 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
27 NISHITANI & CO. LTD. JAPAN
28 NISSHO IWAI CORPORATION JAPAN
29 OKURA & CO. LTD. JAPAN
30 SOJITZ CORPORATION JAPAN
31 SUMITOMO METAL INDUSTRIES LTD. JAPAN
32 HYUNDAI CORPORATION KOREA
33 BRITISH STEEL CORPORATION U.K.
34 CORUS TUBES LIMITED U.K.
35 SAW PIPES USA, INC U.S.A
CS/AS LTCS SEAMLESS PIPES
1 BHEL INDIA
2 CHETAN STEELS (Upto 12”, SCH80) INDIA
3 HEAVY METAL & TUBES (Upto 8”, thickness upto 18.26mm) INDIA
4 HEAVY METAL PIPE CENTRE (UPTO 24" (UPTO SCHXXS) INDIA
5 INDIAN TUBE CO. (TATA DEV. OF TUBES & PIPES) INDIA
6 ISMT LIMITED INDIA
7 JAY LAKSHMI STEEL & ENGG. CO. INDIA
8 JINDAL SAW LTD. INDIA
9 MAHARASHTRA SEAMLESS LTD. INDIA
10 P.K.FORGE & FITTING INDUSTRIES INDIA
11 RATNADEEP METAL & TUBES PVT. LTD. INDIA
12 SAINEST TUBES PVT. LTD. ( ½ “ NB TO 3” UPTO SCH. 160 (ASTM A 106 GR. B, A333 GR. 1 & 6 & A335 GR. P11))
INDIA
13 PHOCEENNE FRANCE
14 ETS TROUVAY & CAUVIN FRANCE
15 MANNESMANN HANDEL AG GERMANY
16 HORST KURVERS GMBH GERMANY
17 DALMINE SPA ITALY
18 GAM RACCORDI S.P.A ITALY
19 IBF SEAMLESS PIPES SPA ITALY
20 RACCORTUBI SRL ITALY
21 MARUBENI ITOCHU STEEL JAPAN
22 MITSUBISHI CORPORATION JAPAN
23 NIPPON STEEL CORPORATION JAPAN
24 NISHITANI & CO. LTD. JAPAN
25 NISSHO IWAI CORPORATION JAPAN
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 11 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
26 OKURA & CO. LTD. JAPAN
27 SOJITZ CORPORATION JAPAN
28 SUMITOMO METAL INDUSTRIES LTD. JAPAN
29 HYUNDAI CORPORATION KOREA
30 AB SANDVIK STEEL SWEDEN
31 VOMAL INTERNATIONAL LIMITED U.K.
32 CORUS TUBES LIMITED U.K.
33 BRITISH STEEL CORPORATION U.K.
SS SEAMLESS/ WELDED PIPES
1 APEX TUBES INDIA
2 BHANDARI FOILS & TUBES LIMITED (SEAMLESS UPTO 4" (SCH. 80) & WELDED UPTO 20" (THK. <= 8
INDIA
3 CHOKSI TUBE COMPANY LTD. INDIA
4 CHETAN STEELS ( UPTO 6” SCH. 40 ) INDIA
5 HEAVY METAL & TUBES (UPTO 8" (THICKNESS UPTO 18.26 MM)) INDIA
6 HEAVY METAL PIPE CENTRE (UPTO 8" ( UPTO SCH80S) (PDIL APPROVED MANUFACTURER'S MAKE ONLY))
INDIA
7 JAY LAKSHMI STEEL & ENGG. CO. INDIA
8 JINDAL SAW LTD. INDIA
9 KRYSTAL STEEL MANUFACTURING PVT. LTD. (UPTO 2" (MATERIAL UPTO GRADE SS 321))
INDIA
10 MARDALE PIPES PLUS LTD. INDIA
11 MODERN TUBE INDUSTRIES LTD. (Upto 2" (upto SS Grade 321)) INDIA
12 NUCLEAR FUEL COMPLEX INDIA
13 P.K.FORGE & FITTING INDUSTRIES INDIA
14 PRAKASH STEELAGE LTD. (Seamless: upto 12” & Welded: upto 24”) INDIA
15 QUALITY STAINLESS PVT. LTD. INDIA
16 RAJENDRA MECHANICAL INDUSTRIES LTD. INDIA
17 RATNAMANI METALS & TUBES LTD. INDIA
18 RATNADEEP METAL & TUBES PVT. LTD. ( SMLS. 6” , WELDED 2” ) INDIA
19 SANDVIK ASIA PVT. LTD. (¾" TO 2" (THK: UPTO 8.74 MM)) INDIA
20 SANGHVI METALS (TRADER) INDIA
21 SCORODITE STAINLESS (INDIA) PVT. LTD. (UPTO 2" (UPTO SS GRADE 321))
INDIA
22 SUBHLAXMI METALS & TUBES PVT. LTD. (Seamless: upto 2” & Welded: upto 8”)
INDIA
23 SURAJ STAINLESS LIMITED INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 12 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
24 THE BENGAL MILL STORES SUPPLY CO.(TRADER) INDIA
25 ZHEJIANG JIULI STAINLESS STEEL PIPE CO. LTD. CHINA
26 ETS TROUVAY & CAUVIN FRANCE
27 PHOCEENNE FRANCE
28 H. BUTTING GMBH & CO. (SEAMLESS : UPTO 30" (UPTO 16MM THK) & WELDED: UPTO 72" (UPTO 64MM )
GERMANY
29 HORST KURVERS GMBH GERMANY
30 MANNESMANN HANDEL AG GERMANY
31 THYSSEN-KRUPP STAHLUNION GMBH GERMANY
32 DALMINE SPA ITALY
33 GAM RACCORDI S.P.A ITALY
34 IBF SEAMLESS PIPES SPA ITALY
35 RACCORTUBI SRL ITALY
36 MARUBENI ITOCHU STEEL JAPAN
37 MITSUBISHI CORPORATION JAPAN
38 NIPPON STEEL CORPORATION JAPAN
39 NISHITANI & CO. LTD. JAPAN
40 NISSHO IWAI CORPORATION JAPAN
41 OKURA & CO. LTD. JAPAN
42 SOJITZ CORPORATION JAPAN
43 SUMITOMO METAL INDUSTRIES LTD. JAPAN
44 AB SANDVIK STEEL SWEDEN
45 T.T.I. – TUBACEX TUBOS INOXIDABLES, S.A. SPAIN
46 SOSTA BV (UPTO 72" ( THICKNESS UPTO 25.4 MM)) NETHERLAND
47 VOMAL INTERNATIONAL LIMITED U.K.
48 CORUS TUBES LIMITED U.K.
49 BRITISH STEEL CORPORATION U.K.
50 HYUNDAI CORPORATION KOREA
SS SEAMLESS TUBES
1 ANIL METAL CORPORATION INDIA
2 APEX TUBES PVT. LIMITED (UPTO 50.8 MM OD (THICKNESS UPTO 4.00 MM))
INDIA
3 BHANDARI FOILS & TUBES LIMITED (UPTO 50MM OD) INDIA
4 HEAVY METAL & TUBES (UPTO 8" (THICKNESS UPTO 18.26 MM)) INDIA
5 KRYSTAL STEEL MANUFACTURING PVT. LTD. (UPTO 50.8 MM OD (MATERIAL UPTO GRADE SS 321))
INDIA
6 MODERN TUBE INDUSTRIES LIMITED (UPTO 50.80 MM OD (UPTO SS INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 13 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
GRADE 321))
7 PRAKASH STEELAGE LTD. (Seamless: upto114 mm OD, Thickness upto 6 mm)
INDIA
8 RATNAMANI METALS & TUBES LTD. INDIA
9 SANDVIK ASIA PVT. LTD. (OD UPTO 60.33 (THK: UPTO 8.74 MM)) INDIA
10 SCORODITE STAINLESS (INDIA) PVT.LTD. (UPTO 50.80 OD (UPTO SS GRADE 321))
INDIA
11 SURAJ STAINLESS LIMITED INDIA
12 T.T.I.-TUBACEX TUBOS INOXIDABLES, S.A.(OD 15.8 MM TO 250.0 MM, WALL THK.1.0 MM)
SPAIN
FITTINGS: CS/AS/SS SEAMLESS & FORGED
1 AMFORGE INDUSTRIES INDIA
2 ANIL METAL CORPORATION INDIA
3 CHETAN STEELS ( UPTO 6” SCH. 80 ) INDIA
4 COMMERCIAL SUPPLYING AGENCY INDIA
5 CSA FITTINGS (Forged ½” to 2”-upto 900#, Seamless: 2” to 8”- upto SCHXXS)
INDIA
6 EBY FASTENERS INDIA
7 EBY INDUSTRIES INDIA
8 FIT-TECH INDUSTRIES (Forged ½” to 1 1/2”-upto 900#, Seamless: 2” to 8”- upto SCHXXS)
INDIA
9 FLASH FORGE(P) LTD.(Forged upto 4”-upto 900#, Seamless/welded: up to 42”)
INDIA
10 GUJARAT INFRAPIPES PVT. LTD. INDIA
11 JAY LAKSHMI STEEL & ENGINEERING CO. INDIA
12 KALPESH TUBE(INDIA),(TRADER) (UPTO A MAX ORDER VALUE RS.25.0 LAKH)
INDIA
13 M.S FITTINGS MANUFACTURING CO. PVT LTD. INDIA
14 MARDALE PIPES PLUS LTD. INDIA
15 NAVKAR FORGINGS & FITTINGS PVT. LTD INDIA
16 NL HAZRA (upto SCH80) INDIA
17 P.K TUBES & FITTINGS PVT. LTD. INDIA
18 P.K FORGE & FITTING INDUSTRIES INDIA
19 PARAS FITTINGS PVT. LTD. (Forged: CS ½” to 2” & CS Seamless: 2” to 8”- upto SCHXXS)
INDIA
20 PARMAR TECHNO FORGE (Elbow, Tee, Reducer- ½” to 12” & Cap upto 18”)
INDIA
21 PERFECT MARKETTING PVT. LTD. INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 14 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
22 PETROCHEM INDUSTRIES (Seamless: Upto 16" (All Fittings) & upto 36" (caps) SCH : XXS /80S, Forged: upto 3”-6000#)
INDIA
23 RAJENDRA FORGE INDUSTRIES (CS: UPTO 12" SCH 40 & SS: 6" SCH 40S)
INDIA
24 S & G ENGINEERS (P) LTD. INDIA
25 SAGAR STEEL CORPORATION (TRADER) INDIA
26 SANGHVI METALS (TRADER) INDIA
27 SAWAN ENGINEERS INDIA
28 SHIVANANDA PIPE FITTINGS LTD., INDIA
29 STEWARTS AND LLOYDS OF INDIA LIMITED INDIA
30 TEEKAY TUBES PRIVATE LIMITED INDIA
31 THE BENGAL MILL STORES SUPPLY CO.(TRADER) INDIA
32 TOPAZ PIPING INDUSTRIES INDIA
33 TUBE BEND (CALCUTTA) PVT. LTD. (CS FITTINGS ONLY) INDIA
34 TUBE PRODUCTS INCORPORATE INDIA
35 ZOLOTO INDUSTRIES (upto 6” (only CS Galv.)) INDIA
36 PHOCEENNE FRANCE
37 ETS TROUVAY & CAUVIN FRANCE
38 VALLOUREC FRANCE
39 SEIKMANN ANLAGEN-TECHNIK GMBH. GERMANY
40 TPS-TECHNITUBE ROHRENWERKE GMBH GERMANY
41 MANNESMANN HANDEL AG GERMANY
42 HORST KURVERS GMBH GERMANY
43 PETROL RACCORD S.P.A. (Seamless: 1” to 42” (Elbow) & 1” to 56” Tee/Reducer/Cap))
ITALY
44 DALMINE SPA ITALY
45 GAM RACCORDI S.P.A ITALY
46 IBF SEAMLESS PIPES SPA ITALY
47 IND MECCANICA BASSI LUIGI & C. SPA ITALY
48 MANTOVANI SPA ITALY
49 RACCORTUBI SRL ITALY
58 TECHNO FORGE SPA ITALY
51 MARUBENI ITOCHU STEEL JAPAN
52 NIPPON KOKAN JAPAN
53 NISHITANI & CO. LTD. JAPAN
54 NISSHO IWAI CORPORATION JAPAN
55 OKURA & CO. LTD. JAPAN
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 15 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
56 SOJITZ CORPORATION JAPAN
57 SUMITOMO METAL INDUSTRIES LTD. JAPAN
58 HAITIMA CORPORATION TAIWAN
59 CORUS TUBES LIMITED U.K.
60 BRITISH STEEL CORPORATION U.K.
61 EUROTUBE LIMITED U.K.
62 VOMAL INTERNATIONAL LIMITED U.K.
63 BONNEY FORGE U.S.A.
FORGED FLANGES
1 AJAY FORGING PVT. LTD INDIA
2 AMFORGE INDUSTRIES INDIA
3 ANANDMAYEE FORGINGS PVT. LTD. INDIA
4 C D ENGINEERING INDIA
5 CHAUDHARY HAMMER WORKS (P) LTD. INDIA
6 CHETAN STEELS (UPTO 6”, 150#) INDIA
7 `ECHJAY INDUSTRIES LTD INDIA
8 FERROUS ALLOYS FORGING PVT. LTD INDIA
9 GOOD LUCK ENGINEERING CO. (½"-12" (UPTO 2500#), 14"-16" (UPTO 900#), 18"-32" (UPTO 600#), 34"-48" (UPTO 300#),
INDIA
10 J.K FORGINGS INDIA
11 KUNJ FORGINGS PVT. LTD.(MATERIAL CS/SS/AS) (upto 60” (upto 300#) & upto 12” (upto 2500#))
INDIA
12 MAHESH INDUSTRIES (Upto 8” -150#, material ASTM A105 only) INDIA
13 P.K TUBES & FITTINGS PVT. LTD. (Upto 24”(upto1500#) & Upto 12”(upto2500#) Spectacle Blind and Spacer & Blinds only)
INDIA
14 PARAMOUNT FORGE (CS,AS & SS : ½” TO 42” (UPTO 600#), ½” TO 24” (UPTO 900#, ½ “ TO 16” ( UPTO 1500#), ½” TO 12” (UPTO 2500#)).
INDIA
15 PERFECT MARKETING (P) LTD. INDIA
16 PUNJAB STEEL INDIA
17 R D FORGE (A UNIT OF R D CHEMICALS PVT LTD) (Upto 54” (150#), 42” (upto 600#), 20” (upto 1500#) & 12” (2500#))
INDIA
18 RAJENDRA FORGE INDUSTRIES (CS & SS : UPTO 12", 300#) INDIA
19 S & G ENGINEERS (P) LTD. INDIA
20 SANGHVI FORGINGS & ENGINEERING LTD INDIA
21 SANGHVI METALS (TRADER) INDIA
22 SAWAN ENGINEERS INDIA
23 TECHNO FORGE LTD. (UPTO 42" (UPTO 300#), UPTO 24" (600#), UPTO 20" (900#), UPTO 16" (1500#),
INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 16 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
24 TUBE BEND (CALCUTTA) PVT LTD INDIA
25 PHOCEENNE FRANCE
26 ETS TROUVAY & CAUVIN FRANCE
27 HORST KURVERS GMBH GERMANY
28 I.S. INTERNATIONAL ITALY
29 MANTOVANI SPA ITALY
30 OFFICINE NICOLA GALPERTI & FIGLIO S.P.A ITALY
31 RACCORTUBI SRL ITALY
32 NICHINAN SANGYO CO. LTD., JAPAN
33 NISHITANI & CO. LTD. JAPAN
34 SOJITZ CORPORATION JAPAN
35 VOMAL INTERNATIONAL LIMITED U.K.
GATE/ GLOBE/ CHECK VALVES CS/SS/AS < 900 LBS
1 AV VALVES LTD. (CAST UPTO 42” ,150#) 28” 300#, 24” (600#) & FORGE UPTO 2” (800#)
INDIA
2 ADVANCE VALVES (2”-80” (Upto 600#) Dual Plate Check Valves only)
INDIA
3 ASSOCIATED TOOLINGS (I) PVT. LTD. INDIA
4 AUDCO INDIA LIMITED (L&T VALVES DIVN.) INDIA
5 AUTOCAP INDUSTRIES (1/2” to 2” 800# (only CS & SS) INDIA
6 BELL- O-SEAL VALVES LTD.( FOR ZERO LEAKAGE , HAZARDOUS FLUIDS.)
INDIA
7 BHEL ( VALVES DIVISION) INDIA
8 BRIGHTECH VALVES AND CONTROLS PVT. LTD. (Upto 8” x 300#) INDIA
9 CHEMTECH INDUSTRIAL VALVES PVT. LTD. INDIA
10 CRAWLEY & RAY (FOUNDERS & ENGINEERS) PVT. LTD. (<=300#, (only CS))
INDIA
11 DATRE CORPORATION LTD. (Upto 300#, 2” to 8” (Gate), 2” to 6” (Globe & Check Valves))
INDIA
12 DEWRANCE MACNEILL & CO. LTD. INDIA
13 ECONO VALVES PVT. LTD. INDIA
14 EXPERT ENGINEERING ENTERPRISES INDIA
15 FLOCON SYSTEMS PVT. LTD. (CS upto 6” – 1500#) INDIA
16 FLOVEL VALVES PVT. LTD.( SINGLE DISC , DULA PLATE & NOZZLE CHECK VALVES ONLY : UPTO 48” (150#) & 24 (UPTO 600#)
INDIA
17 FLUIDTECH EQUIPMENT PVT. LTD. ( CAST # CS & SS 2” TO 12” INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 17 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
150# & 2 “ TO 8” 300 # AND FORGED (CS AND SS ) ½” TO 2” (800#)
18 FORWARD ALLOYS & CASTINGS ( UPTO 14”) INDIA
19 GURU INDUSTRIAL VALVES PVT. LTD. (Cast CS only: upto 24”(150#), 20”(300#), 10” (600#) & Forged : upto 2” (800#)
INDIA
20
HAWA ENGINEERS LTD. (Gate Valves: upto 40”(150#), upto 26” (300#), upto 24” (600#), upto 2” (800#); Globe Valves: upto 20”(150#), upto 16” (300#), upto 12” (600#), upto 2” (800#), Check Valves: upto 36”(150#), upto 24” (300#), upto 16” (600#), upto 2” (800#) (Dual Plate: 36” (150#)
INDIA
21 HAWA VALVES INDIA PVT. LTD. (CS upto 6”, 150#) INDIA
22 HI-TECH VALVES PVT. LTD. (CS,<=800 #, SIZE ½-2, <=300# FOR SIZE 2-6”)
INDIA
23 INTERVALVE INDIA LTD. (CAST UPTO 24” (UPTO 300#) & UPTO 12” 600# , FORGED UPTO 2” (800#))
INDIA
24 JC VALVES & CONTROLS INDIA PVT. LTD. (CAST UPTO 48” (150#) & 24” (UPTO 600#) & FORGED UPTO 2” (800#))
INDIA
25 KIRLOSKAR BROTHERS LTD.( CS UPTO 12” , 300#) INDIA
26 KSB PUMPS LIMITED (VALVES DIVN) INDIA
27 LARSEN & TOUBRO LIMITED (1/2" TO 24") INDIA
28 LEADER VALVES LTD. (Casting<=20”-600#, 300-150#, Forging<=2”-800#)
INDIA
29 M.H. VALVES PVT. LTD. (1/2” to 1 1/2”-800#, 2” to 6”-600#) INDIA
30 MICON ENGINEERS (HUBLI) [PVT. LTD.(Cast: Upto 12” (150# & 300#), 6” (600#) & Forged: upto 2” (800#))
INDIA
31 MICROFINISH VALVES LTD. INDIA
32 NSSL LTD. (UPTO 80” (150#), 56” UPTO 600# & FORGED UPTO 2” (800 #))
INDIA
33 NITON VALVES INDUSTRIES PVT. LTD. INDIA
34 OSWAL IND. LTD. (UPTO 48” (150#), 32” (300#) & 24” (600#) INDIA
35 S & M INDUSTRIAL VALVES LTD. (CS Gate & Globe Valves 2” – 24” <=300#)
INDIA
36 SHALIMAR VALVES PVT. LTD. (Cast Upto 24” (Upto 600#), Forged: ½” to 1 ½” (800#))
INDIA
37 SHREERAJ INDUSTRIES (CS upto 150#) INDIA
38 STEEL STRONGVALVES (I) PVT. LTD. (Upto 42”) INDIA
39 VENUS PUMP & ENGINEERING WORKS. INDIA
40 VIBA FLUID CONTROL INDIA
41 WEIR BDK VALVES (A UNIT OF WEIR INDIA PVT. LTD.) (Cast UPTO 36" (150#); 24" (300#); 12" (600#) & Forged: Upto 2” (800#))
INDIA
42 ZED VALVES CO. PVT. LTD. (Upto 14” (600#)) INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 18 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
43 ZOLOTO INDUSTRIES. ( 40 MM TO 200 MM(ONLY CS & SS)) INDIA
44 VELAN INC. ( UPTO 48” , 600#) CANADA
45 BOTELI VALVE GROUP CO. LTD.(Cast Upto 56” (150#), 36” (300#), 24” (600#) & Forged: Upto2” (800#))
CHINA
46 ZHEJIANG JIEHUA VALVE CO. LTD. CHINA
47 PEMTO VALVE GERMANY
48 CESARE BONETTI SPA (Cast Upto 42” (Upto 300#), 24” (600#) Forged: ½” to 1 ½” (800#))
ITALY
49 FASANI S.P.A. ITALY
50 FRIULCO SPA (UPTO 48" (150#), 32" (Upto 600#) ITALY
51 GTC ITALIA, S.R.L. ITALY
52 MANTOVANI SpA ITALY
53 OMB S.P.A. ITALY
54 PETROL VALVES S.R.L. ITALY
55 MATSURA H. P MACHINE WORKS CO.LTD. JAPAN
56 NISHITANI & CO. LTD. JAPAN
57 SOJITZ CORPORATION JAPAN
58 REDPOINT ALLOYS BV NETHERLAND
59 WALTHAN & WEIR SPAIN
60 POYAM VALVES (AMPO S.CCP.) (Size upto 60” (Rating upto 800#) SPAIN
61 BABCOCK BORSIG ESPANA , S.A SPAIN
62 SUFA LIMITED U.A.E.
63 BEL VALVES U.K.
GATE/ GLOBE/ CHECK VALVES CS/SS/AS > =900 LBS
1 A V VALVES LIMITED (Cast Upto 24” (900# & 1500#), 8” (2500#) Forged: Upto 2” (2500#))
INDIA
2 ADVANCE VALVES (2”-36” (900#) 2”-24” (1500#), 2”-12(2500#) Forged: Upto 2” (2500#)) FOR DUAL PLATE CHECK VALVES)
INDIA
3 ASSOCIATED TOOLINGS (I) PVT. LTD. (½” TO 2” (900# & 1500#)) INDIA
4 AUDCO INDIA LIMITED (L&T VALVES DIVN.) INDIA
5 BHEL (VALVES DIVISION) INDIA
6 FLOVEL VALVES PVT. LTD. (Dual Plate Check Valves: Upto 24” (900#)
INDIA
HAWA ENGINEERS LTD. (Gate Valves: upto 20”(900#), upto 10” (1500# & 2500#); Globe Valves: upto 8”( 900# & 1500#), upto 1” (2500#); Check Valves: upto 10”(900#), upto 6” (1500#), upto 1” (2500#)
INDIA
7 HAWA VALVES INDIA PVT. LTD. (Forged upto 2”, 1500#) INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 19 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
8 INTERVALVES INDIA LTD.(Forged: Upto 2” (1500#)) INDIA
9 JC VALVES & CONTROLS INDIA PVT. LTD. (CAST UPTO 12” (1500#),10” (2500#) & FORGED UPTO 2” (2500#))
INDIA
10 KSB PUMPS LIMITED (VALVES DIVN) INDIA
11 LARSEN & TOUBRO LIMITED (1/2" TO 2") INDIA
12 LEADER VALVES LIMITED (1500# & 2500# UPTO 12", FORGING UPTO 2" 2500#)
INDIA
13 METROPOLITAN INDUSTRIES (SIZE=200mm, rating=2500 lb) INDIA
14 MICON ENGINEERS (HUBLI) PVT. LTD. (FORGED: UPTO 2" (1500#))
INDIA
15 NSSL LIMITED. (CAST: Upto 36"(900#), 24” (upto 2500#) & FORGED: Upto 2” (Upto 2500#))
INDIA
16 OSWAL INDUSTRIES LTD. (Upto 12” (900# & 1500#)) INDIA
17 SHALIMAR VALVES PVT.LTD.(CAST: UPTO 20"(900#), FORGED: ½" TO 1 ½" (1500#))
INDIA
18 WEIR BDK VALVES (A UNIT OF WEIR INDIA PVT. LTD.) (Cast UPTO 12" (upto 2500#) & Forged: Upto 2” (1500#), 1” (2500#))
INDIA
19 VELAN INC. ( UPTO 24” (Rating upto 2500#)) CANADA
20 BOTELI VALVE GROUP CO. LTD.(Cast Upto 16” (Upto 1500#), 12” (2500#) & Forged: Upto 2” (1500# & 2500#))
CHINA
21 ZHEJIANG JIEHUA VALVE CO. LTD. CHINA
22 BFE BONNEY FORGE VALVE LICENSEE ITALY
23 CESARE BONETTI SPA (Upto 24” (Upto 2500#) ITALY
24 FASANI S.P.A. ITALY
25 FRIULCO SPA (UPTO 32" (900#); 24" (1500#); 14" (2500#)) ITALY
26 GTC ITALIA S.R.L. ITALY
27 OMB S.P.A. ITALY
28 PETROL VALVES S.R.L. ITALY
29 VALVITALIA SPA ITALY
30 MATSURA H. P MACHINE WORKS CO.LTD. JAPAN
31 NISHITANI & CO. LTD. JAPAN
32 BABCOCK BORSIG ESPANA, S.A. SPAIN
33 POYAM VALVES, (AMPO S. COOP.) (SIZE UPTO 30" (RATING UPTO 2500#))
SPAIN
34 SUFA LIMITED U.A.E.
35 BEL VALVES U.K.
BALL VALVES (SOFT SEATED)
1 A V VALVES LIMITED (Upto 12” (Upto 600#)) INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 20 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
2 AIRA EURO AUTOMATION PVT. LTD. (Upto 6”, Rating 150# & 300#), INDIA
3 AQUA VALVES PVT. LTD. INDIA
4 BRIGHTECH VALVES & CONTROLS PVT. LTD. (4” x 150# for CS, AS & SS material)
INDIA
5 CHEMTECH INDUSTRIAL VALVES PVT. LTD. INDIA
6 CRAWLEY & RAY (FOUNDER & ENGINEERS) PVT. LTD. (DN25) INDIA
7 DELVAL FLOW CONTROLS PVT. LTD. (Upto 12” (Upto 900#)) INDIA
8 FLOCON SYSTEMS PVT. LTD. (CS upto 6”, 150#) INDIA
9 FLOW CONTROL INDIA
10 FLOWCHEM INDUSTRIES ( UPTO 300# and upto 10”) INDIA
11 FLUIDTECH EQUIPMENT PVT. LTD( UPTO 4” (300#)) INDIA
12 FORWARD ALLOYS AND CASTINGS (Upto 900#) INDIA
13 GURU INDUSTRIAL VALVES PVT. LTD. (Cast CS only: Upto 12” (Upto 300#), 4” (Upto 900#) & Forged: Upto 2” (800#))
INDIA
14 HAWA ENGINEERS LTD. (Upto 16" (150# & 300#), Upto 12" (600# & 900#))
INDIA
15 INTERVALVE INDIA LTD. (Forged: Upto 2" (800#), Cast: Upto 12" (Upto 300#))
INDIA
16 JC VALVES & CONTROLS INDIA PVT. LTD. (CAST UPTO 28” (upto 600#),12” (900# , 1500#) & 10” (2500#))
INDIA
17 KSB PUMPS LTD. (VALVES DIVN.) (CS upto 100DN, 20 bar) INDIA
18 LEADER VALVES LTD. (Casting upto 600#, 6” & forging upto 800#, 2”)
INDIA
19 MICON ENGINEERS (HUBLI) PVT. LTD. (Cast: Upto 6” (150# & 300#) & Forged: Upto 2” (800#)
INDIA
20 MICROFINISH VALVES (P) LTD. INDIA
21 NSSL LTD. (Upto 12" (150# & 300#)) INDIA
22 OSWAL IND. LTD. (Upto 24" (150#, 300# & 600#)) INDIA
23 SHALIMAR VALVES PVT. LTD. (Upto 18" (600#) Material: CS/AS/SS) INDIA
24 VIBA FLUID CONTROL (Upto 300#) INDIA
25 VIRGO ENGINEERS LTD. (Upto 16" (upto 600#)) INDIA
26 WEIR BDK VALVES (Cast: Upto 30” (150# & 300#), 20” (600#), 16” (900#), 12” (1500#) & Forged: Upto 2” (800#))
INDIA
27 XOMOX SANMAR LTD.( FISHER XOMOX) INDIA
28 BHDT GMBH AUSTRIA
29 BOTELI VALVE GROUP CO. LTD. (Upto 32” (150# & 300#), 30” (600#), 24” (900#)
CHINA
30 ZHEJIANG JIEHUA VALVE CO. LTD. CHINA
31 VELAN INC.( UPTO 16”, 600#) CANADA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 21 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
32 ETS TROUVAY & CAUVIN FRANCE
33 PERRIN GMBH ( 2500#, SIZE UPTO 24”) GERMANY
34 FRIULCO SPA (UPTO 48" (150# & 300#); 20" (upto 1500#); 12" (2500#))
ITALY
35 CESARE BONETTI SPA (Cast: Upto 4" (150#) & Forged: Upto 1” (800#) Floating only)
ITALY
36 GTC ITALIA S.R.L ITALY
37 MANTOVANUI SPA ITALY
38 PIBIVESSE SRL (UPTO 48” , 600#) ITALY
39 PETROL VALVES S.R.L ITALY
40 METSO AUTOMATION SINGAPORE
41 POYAM VALVES (AMPO S. COOP.) (Size upto 42” (Rating upto 2500#))
SPAIN
42 HATIMA CORPORATION TAIWAN
BALL VALVES (METAL SEATED)
1 AIRA EURO AUTOMATION PVT. LTD. (Upto 6”, Rating 150# & 300#), INDIA
2 BRIGHTECH VALVES & CONTROLS PVT. LTD. (4” x 150# for CS, AS & SS material)
INDIA
3 DELVAL FLOW CONTROLS PVT. LTD. (Upto 12” (Upto 900#)) INDIA
4 GURU INDUSTRIAL VALVES PVT. LTD. (Cast CS only: Upto 12” (Upto 300#), 4” (Upto 900#) & Forged: Upto 2” (800#))
INDIA
5 HAWA ENGINEERS LTD. (Upto 16" (150# & 300#), Upto 12" (600# & 900#))
INDIA
6 INTERVALVE INDIA LTD.(UPTO 12” , 150#). INDIA
7 JC VALVES & CONTROLS INDIA PVT. LTD. (CAST UPTO 28” (upto 600#),12” (upto 1500#), 10” (2500#))
INDIA
8 MICON ENGINEERS (HUBLI) PVT. LTD. (Cast: Upto 6” (150# & 300#) & Forged: Upto 2” (800#)
INDIA
9 MICROFINISH VALVES (P) LTD. INDIA
10 NSSL LIMITED (Upto 12" NB, (150# & 300#)) INDIA
11 OSWAL INDUSTRIES LTD. (UPTO 24" (150#, 300#, & 600#)) INDIA
12 VIRGO ENGINEERS LTD. (UPTO16" (UPTO 600#)) INDIA
13 WEIR BDK VALVES (A UNIT OF WEIR INDIA PVT. LTD.) (Cast: Upto 30" (150# & 300#); 20" (600#), 16” (900#), 12” (1500#) & Forged: Upto 2” (800#)
INDIA
14 VELAN INC. (SIZE UPTO 16" (Rating Upto 600#)) CANADA
15 BOTELI VALVE GROUP CO. LTD. (Upto 32” (150# & 300#), 30” (600#), 24” (900#)
CHINA
16 ALFA VALVOLE SRL ITALY
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 22 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
17 CESARE BONETTI SPA (UPTO 24" (150#) & 4" (UPTO 1500#) TRUNNION MOUNTED ONLY)
ITALY
18 GE POWER (NUOVO PIGNONE SPA) ITALY
19 GTC ITALIA, S.R.L. ITALY
20 PETROL VALVES S.R.L ITALY
21 PIBIVIESSE (48”, 600#) ITALY
22 VALVITALIA SPA ITALY
23 PERRIN GMBH (SIZE UPTO 24" (RATING UPTO 2500#)) GERMANY
24 RED POINT ALLOYS BV NETHERLAND
25 FRIULCO SPA (UPTO 48" (150# & 300#); 20" (UPTO 1500#); 12" (2500#))
ITALY
26 POYAM VALVES, (AMPO S. COOP.) (SIZE UPTO 42" (RATING UPTO 2500#))
SPAIN
27 METSO AUTOMATION SINGAPORE
28 ORBIT VALVES PLC SINGAPORE
BUTTERFLY VALVES
1 A V VALVES LIMITED (UPTO 48" (150#)) INDIA
2 ADVANCE VALVES (RUBBER LINED AND METAL SEATED) INDIA
3 AIRA EURO AUTOMATION PVT. LTD. (Upto 48”, Rating upto 300#) INDIA
4 AUDCO INDIA LIMITED (L&T VALVES DIVN.) INDIA
5 BDK PROCESS CONTROL PVT LTD. (UPTO 1600MM) INDIA
6 CHEMTECH INDUSTRIAL VALVES PVT LTD INDIA
7 CRAWLEY & RAY (FOUNDER & ENGINEERS) PVT. LTD. (40mm-1000mm)
INDIA
8 DELVAL FLOW CONTROLS PVT. LTD. (Upto 24” (Upto 300#)) INDIA
9 FLOCON SYSTEMS PVT. LTD. (CS upto 12”, 150#) INDIA
10 FLUIDTECH EQUIPMENT PVT. LTD. (CS upto 12” (300#)) INDIA
11 FOURESS ENGINEERING (I) LTD. INDIA
12 HAWA ENGINEERS LTD. (2" to 48”(PN10/PN16/150#/300#)) INDIA
13 HAWA VALVES INDIA PVT. LTD. (CS UPTO 6", 150#) INDIA
14 HI-TECH BUTTERFLY VALVES INDIA PVT. LTD (<300#,<30"(TEFLON/RUBBER) ,<72"(METAL))
INDIA
15 INSTRUMENTATION LTD. (PALAKKAD) INDIA
16 INTERVALVE INDIA LTD. (Upto 72” (150#) & Upto 16” (300#)) INDIA
17 JC VALVES & CONTROLS INDIA PVT. LTD. (Upto 20” (150#) & 10” (300#))
INDIA
18 L&T LTD (1/2" TO 24") INDIA
19 LEADER VALVES LTD.(150#, upto 16”) INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 23 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
20 MATHER & PLATT (INDIA) LTD. A SUBSIDIARY OF WILO SE GERMAN (UPTO DN 1600,PN10, Double flange type)
INDIA
21 METROPOLITAN INDUSTRIES (SIZE=2000mm) INDIA
22 MICON ENGINEERS (HUBLI) [PVT. LTD.(Upto 24” (PN10 & PN16)) INDIA
23 VENUS PUMP & ENGINEERING WORKS (upto 600NB, 150#) INDIA
24 VIRGO ENGINEERS LTD. ((Triple offset only): 3” to 24”, Upto 600# (CS/SS))
INDIA
25 WEIR BDK VALVES (A UNIT OF WEIR INDIA PVT. LTD.) (Upto 56” (Upto 250#), 24” (300#))
INDIA
26 XOMOX SANMAR LIMITED (FISHER XOMOX) INDIA
27 TOMOE VALVE CO. LTD. (Upto 48”(150# & 300#), Upto 24”(600#, 900# & 1500#))
JAPAN
28 BHDT GMBH AUSTRIA
29 VELAN INC. (Size upto 48”(Rating upto 600#) CANADA
30 BOTELI VALVE GROUP CO. LTD. (Upto 36” (150# & 300#) CHINA
31 ZHEJIANG JIEHUA VALVE CO. LTD. CHINA
32 GRISS SAPAG INDUSTRIAL VALVES FRANCE
33 ADAMS ARMATUREN GERMANY
34 GTC ITALIA, S.R.L. ITALY
35 HAITIMA CORPORATION TAIWAN
36 WEIR VALVES & CONTROLS DIVISION. U.K
37 LEEDS VALVE LTD U.K
38 CURTIS WRIGHT FLOW CONTROL CORPOARATION U.S.A.
39 LEAR SIEGLER MEAS. CTRLS. CORP U.S.A.
40 TYCO INTERNATIONAL INC.,U.S.A. U.S.A.
41 EMERSON PROCESS MGT U.S.A.
42 SPX VALVES & CONTROLS U.S.A.
43 XOMOS (CRANE CO.) U.S.A.
PLUG VALVES (NON LUBRICATED)
1 A V VALVES LIMITED (UPTO 48" (150#)) INDIA
2 AUDCO INDIA LTD (L&T VALVES DIVN.) INDIA
3 AZ ARMATUREN GMBH (1/2” TO 20”(150#, 300# & 600#), Matl. CS, AS &SS)
INDIA
4 BDK PROCESS CONTROL PVT LTD. INDIA
5 CHEMTECH INDUSTRIAL VALVES PVT LTD INDIA
6 CRAWLEY & RAY (FOUNDERS & ENGINEERS) PVT. LTD (DN 200) INDIA
7 FLUIDTECH EQUIPMENT PVT. LTD. (Upto 4” (300#)) INDIA
8 GURU INDUSTRIAL VALVES PVT. LTD. (Cast CS only: Upto 12” INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 24 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
(Upto 300#), Upto 4” (Upto 900#)) & Forged: Upto 2” (800#))
9 HAWA ENGINEERS LTD. (1/2” TO 8” (150#)) INDIA
10 JC VALVES & CONTROLS INDIA PVT. LTD. (Upto 12” (Upto 300#)) INDIA
11 L&T LTD ( 1/2" TO 24") INDIA
12 LEADER VALVES LIMITED (Upto 6” (Upto 300#)) INDIA
13 WEIR BDK VALVES (A UNIT OF WEIR INDIA PVT. LTD.) (UPTO 16"(150#), 12" (300#), 3" (600#))
INDIA
14 XOMOX SANMAR LIMITED (FISHER XOMOX) INDIA
15 ZHEJIANG JIEHUA VALVE CO. LTD. CHINA
16 O.M.S. SALERI DI SALERI P & FIGLI S.M.C. ITALY
17 POYAM VALVES, (AMPO S. COOP.) (UPTO 30" (UPTO 900#) FOR LIFT PLUG VALVES ONLY.)
SPAIN
FLAT GASKETS
1 FERROLITE JOININGS (P) LTD. INDIA
2 GASKETS (INDIA) PVT. LTD INDIA
3 GOODRICH GASKET PVT. LTD. (UPTO 24") INDIA
4 HINDUSTAN ASBESTOS & ALLIED PRODUCTS INDIA
5 HINDUSTAN COMPOSITE LTD. INDIA
6 HINDUSTAN FERREDO LTD. INDIA
7 IGP ENGINEERS LIMITED INDIA
8 MADRAS INDUSTRIAL PRODUCTS(UPTO 48") INDIA
9 MECHANICAL PACKING INDUSTRIES LTD. INDIA
10 PACKING & JOINTINGS (P) LTD. INDIA
11 PERFECT MARKETING (P) LTD, INDIA
12 PRASHANT ENGG STORES INDIA
13 REIN TALBROS PVT. LTD. INDIA
14 SPIRALSEAL GASKETS PVT. LTD. (CAF & Teflon) INDIA
15 STARFLEX SEALING INDIA PVT. LTD. INDIA
16 THE BENGAL MILL STORES SUPPLY CO. (TRADER) INDIA
17 UNIQUE INDUSTRIAL PACKINGS PVT. LTD. INDIA
SPIRALLY WOUND GASKETS
1 GASKETS (INDIA) PVT. LTD INDIA
2 GOODRICH GASKET PVT. LTD. INDIA
3 IGP ENGINEERS LIMITED INDIA
4 MADRAS INDUSTRIAL PRODUCTS INDIA
5 PACKINGS & JOINTINGS PVT. LTD INDIA
6 PERFECT MARKETING (P) LTD, INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 25 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
7 PRASHANT ENGG STORES INDIA
8 SPIRASEAL GASKETS PVT. LTD. INDIA
9 STARFLEX SEALING INDIA PVT. LTD. INDIA
10 THE BENGAL MILL STORES SUPPLY CO. (TRADER) INDIA
11 UNIQUE INDUSTRIAL PACKINGS PVT.LTD. (UPTO 42"(600#) & UPTO 24" (2500#))
INDIA
12 ZHEJIANG JIEHUA VALVE CO. LTD. INDIA
EXPANSION JOINTS & BELLOWS
1 CORI ENGINEERS PVT. LTD. INDIA
2 D.WREN & CO. (For Rubber & Fabric) INDIA
3 FLEXATHERM EXPANLLOW PVT. LTD. (Circular: Upto 240”, Rectangular No bar for size, (Upto 600#))
INDIA
4 FLEXICAN BELLOWS & HOSES PVT. LTD INDIA
5 FLUIDYNE ENGG. (I) PVT. LTD INDIA
6 KELD ELLENTOFT INDIA PVT. LTD INDIA
7 LONESTAR INDUSTRIES INDIA
8 MB METALLIC BELLOWS (INDIA) PVT. LTD INDIA
9 PRASHANT ENGG. STORES INDIA
10 STANDARD PRECISION BELLOWS INDIA
11 TUBOFLEX GERMANY
12 FLEXIDER S.P.A. ITALY
STRAINERS (PERMANENT INCLUDING Y-TYPE)
1 CHEMTECH INDUSTRIAL VALVES PVT. LTD INDIA
2 FLAIR STRAINERS & FILTERS (SIZE UPTO 42" (RATING UPTO 1500#))
INDIA
3 GRAND PRIX ENGINEERING PVT. LTD. (UPTO 60" PIPELINE, UPTO ANSI 1500#)
INDIA
4 GREAVES LIMITED INDIA
5 GUJARAT OTOFILT INDIA
6 HAWA ENGINEERS LTD. (1/2” to 24”(150# / 300#) INDIA
7 KWIKFLO FILTERS PVT. LTD. INDIA
8 LEADER VALVES LTD. (upto 300# & upto 12” size) INDIA
9 MULTITEX FILTERATION ENGINEERS LTD INDIA
10 MOD FABRICATORS INDIA
11 ZOLOTO INDUSTRIES (15MM TO 100MM) INDIA
12 BOTELI VALVE GROUP CO. LTD. (Y - TYPE ONLY: 14" (150#) & 3" (300# & 600#))
CHINA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 26 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
STEAM TRAPS
1 GREAVES LTD. INDIA
2 PENNANT ENGINEERING PVT. LTD. INDIA
3 VIRGO ENGINEERS LTD. (1/2” to 4” (upto 600#) (CS/SS)) INDIA
4 YARWAY CORPORATION INDIA
5 ZOLOTO INDUSTRIES (15 mm to 25 mm) INDIA
6 GESTRA AG GERMANY
7 ARMSTRONG INTERNATIONAL INC. U.S.A
8 OGONTZ CORPORATION U.S.A
9 TYCO INTERNATIONAL INC.,U.S.A. U.S.A
SPRING SUPPORTS
1 MYRICS PIPING SYSTEM PVT.LTD. INDIA
2 PIPE SUPPORTS INDIA PVT. LTD. INDIA
3 PIPING & ENERGY PRODUCTS (P) LTD. INDIA
4 SARATHI ENGG. ENTERPRISES PVT. LTD. INDIA
5 SPRING SUPPORTS MFG. CO. INDIA
6 FLEXIDER S.P.A. ITALY
FASTENERS
1 AEP COMPANY INDIA
2 CAPITAL INDUSTRIES INDIA
3 CONSOLE ENGG. & FASTNERS INDUSTRIES INDIA
4 EBY FASTNERS INDIA
5 FIT TIGHT NUTS & BOLTS LTD. INDIA
6 FIX FIT FASTENERS MFG. PVT. LTD. INDIA
7 INDUSTRIAL ENGINEERING CORPORATION (SIZE UPTO 4" (M100)) INDIA
8 MEGA ENGINEERING PRIVATE LIMITED (½" TO 3" MATERIAL: CS/AS/SS)
INDIA
9 METRO MECHANICAL PVT.LTD. INDIA
10 NAGBHUSHANAM INDUSTRIES INDIA
11 NIREKA ENGG. CO. PVT. LTD. INDIA
12 PACIFIC FORGING & FASTENERS PVT. LTD. (M 10 TO M125) INDIA
13 PERFECT MARKETING (P) LTD, INDIA
14 PIONEER NUTS & BOLTS PVT. LTD. INDIA
15 PRECISION AUTO ENGINEERS INDIA
16 PRECISION ENGINEERING INDUSTRIES INDIA
17 PTD FASTNERS PVT. LTD. INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 27 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
18 SANGHVI METALS (TRADER) INDIA
19 SUNDARAM FASTENERS LIMITED INDIA
20 UDHERA FASTENERS INDIA
FIRE FIGHTING SYSTEM
1 AGNICE FIRE PROTECTION LTD. INDIA
2 BHARTIYA CACCIALANZA FIRE SYSTEMS LTD INDIA
3 BLUE STAR LTD. INDIA
4 DE'S TECHNICO INDIA
5 DE'S TECHNICO PVT. LTD. INDIA
6 FUTECH CONSULTANTS PVT. LTD. INDIA
7 GENERAL MECHANICAL WORKS INDIA
8 HD FIRE PROTECTION COMPANY INDIA
9 LAL ENTERPRISES INDIA
10 MATHER & PLATT (INDIA) LTD. (A Subsidiary
of WILO SE German)
INDIA
11 MX SYSTEMS INTERNATIONAL PVT. LTD. INDIA
12 NEWFIRE ENGINEERS SERVICES INDIA
13 PRAGATI ENGG. (PVT.) LTD. INDIA
14 PYROTEK INDUSTRIES (INDIA ) PVT. LTD. INDIA
15 RADIANT FIRE PROTECTION ENGINEERS INDIA
16 STEELAGE INDUSTRIES LTD. INDIA
17 TECHNOFAB ENGG. INDIA
18 TRI-PARULEX FIRE PROTECTION SYSTEMS INDIA
19 UNITECH MACHINES LTD INDIA
20 VIJAY FIRE PROTECTION SYSTEM LTD. INDIA
HOSE PIPE (METALLIC) & CAM LOCK COUPLING
1 AEROFLEX INDUSTRIES LIMITED (Size 6mm to 250mm dia. (SS Corrg. Flex. Hose with Braid, Braid & Assembly) INDIA
2 CHHATARIA RUBBER CHEMICALS INDUSTRIES INDIA
3 D. WREN & CO. INDIA
4 FLEXATHERM EXPANLLOW PVT. LTD. (1/2” to 6”) INDIA
5 GAYATRI INDUSTRIES INDIA
6 GAYATRI INDUSTRIAL CORPORATION (UPTO 6” ID) INDIA
7 HELIFEX HYDRAULICS & ENGG CO. LTD. INDIA
8 SENIOR INDIA PVT. LTD. INDIA
HOSE PIPE (NON-METALLIC) & CAM LOCK COUPLING
1 CHHATARIA RUBBER CHEMICALS INDUSTRIES INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 28 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
4.0 ELECTRICAL
WALL MOUNTING TYPE DISTRIBUTION BOARDS 1. ADHUNIK SWITCHGEARS (P) LTD. INDIA 2. ANAND POWER LIMITED INDIA 3. ASSOCIATED SWITCHGEARS & PROJECTS
LTD. INDIA
4. AUTOMATIC CONTROLS CORPORATION INDIA 5. AVONE SYSTEM & CONTROLS INDIA 6. CONTROLS & SCHEMATICS PVT LTD. INDIA 7. C & S ELECTRIC LTD INDIA 8. ELECMECH CORPORATION INDIA 9. GLOBE ELECTRICAL INDUSTRIES INDIA
10. HAVELLS INDIA LTD. INDIA 11. HI-TECH ENGINEERS INDIA 12. HINDUSTAN CONTROL &EQPTPV. LTD. INDIA 13. INDIANA CURRENT CONTROL LTD. INDIA 14. INDO ASIAN FUSEGEAR LTD INDIA 15. INTRELEC INDIA
16. JAKSON ENGINEERS LTD INDIA
17. LEGRAND INDIA LTD INDIA
18. LOTUS POWERGEARPVT LTD INDIA
19. REUNION ELECTRICAL MANUFACTURERS (P) LTD
INDIA
20. SHIVALIC POWER CONTROL (P) LTD. INDIA
21. STANDARD ELECTRICALS LIMITED INDIA
22. TRICOLITE ELECTRICAL INDUSTRIES PVT. LTD.
INDIA
23. TRIDENT SWITCHGEARS PVT. LTD. INDIA
24. VENUS CONTROLS & SWITCHGEAR (P) LTD.
INDIA
MINIATURE CIRCUIT BREAKERS (MCB)
1. INDO ASIAN FUSEGEAR LTD INDIA
2. LEGRAND INDIA LTD INDIA
2 D. WREN & CO. INDIA
3 GAYATRI INDUSTRIES INDIA
4 GAYATRI INDUSTRIAL CORPORATION (UPTO 8” ID) INDIA
5 HELIFEX HYDRAULICS & ENGG CO. LTD. INDIA
6 PADMINI INDUSTRIES LIMITED INDIA
7 PYROTEK INDUSTRIES (INDIA) PVT. LTD. INDIA
8 SENIOR INDIA PVT. LTD. INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 29 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
3. S & S POWER SWITCHGEAR LTD INDIA
4. STANDARD ELECTRICALS LIMITED INDIA
5. SIEMENS INDIA
6. ABB INDIA
7. SCHNEIDER ELECTRIC INDIA
ELCB 1. GE POWER CONTROLS INDIA PVT. LTD. INDIA 2. HAVELLS INDIA LTD. INDIA
3. INDO ASIAN FUSEGEAR LTD INDIA
4. LEGRAND INDIA LTD INDIA
5. S & S POWER SWITCHGEAR LTD INDIA
6. SIEMENS LTD. INDIA
7. STANDARD ELECTRICALS LIMITED INDIA
8. ABB INDIA 9. SCHNEIDER ELECTRIC INDIA
LOW VOLTAGE INDUSTRIAL SWITCHES/ISOLATORS 1. ASEA BROWN BOVERI LTD. INDIA 2. GE POWER CONTROLS INDIA PVT. LTD. INDIA 3. HAVELLS INDIA LTD. INDIA 4. KAYCEE INDUSTRIES LTD INDIA 5. LARSEN & TOUBRO
LTD.(EL.PRODUCTSDIVN) INDIA
6. SIEMENS LTD. INDIA 7. SCHNEIDER ELECTRIC INDIA
CONTACTOR / THERMAL O/L RELAY / FUSES 1. LARSEN & TOUBRO
LTD.(EL.PRODUCTSDIVN) INDIA
2. SIEMENS LTD. INDIA
PUSH BUTTONS 1. LARSEN & TOUBRO
LTD.(EL.PRODUCTSDIVN) INDIA
2. SIEMENS LTD. INDIA 3. ASEA BROWN BOVERI LTD. INDIA 4. SCHNEIDER ELECTRIC INDIA
INDICATION LAMP 1. LARSEN & TOUBRO
LTD.(EL.PRODUCTSDIVN) INDIA
2. SIEMENS LTD. INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 30 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
3. BINOY INDIA
INDUCTION MOTORS – HV (11KV & 3.3 KV) 1. BHEL (ELECTRICAL MACHINES DIVN.) INDIA
2. JEUMONTINDUSTRIE FRANCE 3. FUJI ELECTRIC SYSTEMS CO. LTD JAPAN 4. MITSUBISHI CORPORATION JAPAN
5. TOSHIBA CORPORATION JAPAN
6. TOSHIBA MITSUBISHI ELECTRIC INDUSTRIAL SYSTEMS CORPORATION (EXCLUDING FLAME-PROOF MOTORS OF FRAME SIZE MORE THAN 900)
JAPAN
7. PEEBLES ELECTRICAL MACHINES UK 8. SIEMENS INDIA / GERMANY 9. ABB FINLAND/SWITZERLAND/
INDIA
INDUCTION MOTORS – LV (415 V) ( SAFE AREA) 1. ASEA BROWN BOVERI LTD INDIA
2. BHEL (ELECTRICAL MACHINES DIVISION) INDIA
3. CROMPTON GREAVES LTD INDIA
4. KIRLOSKAR ELECTRIC COMPANY LTD INDIA
5. SIEMENS LTD INDIA / GERMANY 6. SIEMENS AG, GERMANY GERMANY 7. ANSALDOROBICON ITALY 8. FUJI ELECTRIC SYSTEMS CO. LTD. JAPAN 9. TOSHIBA CORPORATION JAPAN
10. ASEA BROWN BOVERI INDIA /SWEDEN 11. GENERAL ELECTRIC CO. USA
INDUSTRIAL TYPE SW. SOCKET & PLUG 1. BALIGA LIGHTING EQUIPMENTS LIMITED INDIA
2. CHLORIDE POWER SYSTEMS AND SOLUTIONS LTD. (FORMERLY CALDYNE)
INDIA
3. CROMPTON GREAVES LTD INDIA
4. CYCLO ELECTRIC DEVICES & SERVICES CO.
INDIA
5. EX-PROTECTA INDIA
6. FCG FLAMEPROOF CONTROL GEARS PVT. LTD. (FORMERLY CEAG FLAME
INDIA
7. FCG POWER INDUSTRIES LTD INDIA
8. FLAMEPROOF EQUIPMENTSPVT. LTD. INDIA
9. LEGRAND INDIA LTD INDIA 10. LEGRAND S.A. FRANCE 11. BBC-BROWN BOVERI&CIE AG GERMANY
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 31 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
12. R STAHL SCHALTGERATEGMBH GERMANY 13. WEIDMULLER LTD. GERMANY 14. CORTEM S.P.A. ITALY
HOSE PROOF INDUSTRIAL LIGHTING FIXTURES
1. BAJAJ ELECTRICALS LIMITED INDIA
2. CROMPTON GREAVES LTD. INDIA
3. KESELECSCHREDER PRIVATE LIMITED INDIA
4. PHILIPS INDIA LTD. INDIA
5. SPACEAGE SWITCHGEARS LIMITED INDIA
6. SURYA ROSHNI LTD. INDIA
7. WIPRO LIGHTING INDIA
HT POWER CABLES
1. CABLE CORPN. OF INDIA LIMITED INDIA
2. DIAMOND POWER INFRASTRUCTURE LTD INDIA
3. KEC INTERNATIONAL LTD. (FORMERLY RPG CABLES LIMITED
INDIA
4. KEI INDUSTRIES LIMITED (UPTO 33 KV) INDIA
5. NICCO CORPORATION LTD INDIA
6. RAVIN CABLES LIMITED INDIA
7. TORRENT CABLES LTD. INDIA
8. UNIVERSAL CABLES LTD. INDIA
9. UNIFLEX INDIA LT POWER CABLES
1. CABLE CORPN. OF INDIA LIMITED INDIA 2. CORDS CABLE INDUSTRIES LTD INDIA 3. DELTON CABLES LTD INDIA 4. FINOLEX CABLES LTD INDIA 5. INDUSTRIAL CABLES (I) LIMITED (1.1 KV PVC/XLPE
INSULATED) INDIA
6. J K CABLES LIMITED INDIA
7. KEC INTERNATIONAL LTD. (FORMERLY RPG CABLES LIMITED
INDIA
8. KEI INDUSTRIES LIMITED INDIA
9. NICCO CORPORATION LTD INDIA
10. PLAZA CABLE INDUSTRIES LIMITED INDIA
11. RAVIN CABLES LIMITED INDIA
12. TORRENT CABLES LTD INDIA
13. UNIVERSAL CABLES LTD. INDIA
14. POLYCAB INDIA LT CONTROL CABLES (1.1 KV)
1. CABLE CORPN. OF INDIA LIMITED INDIA 2. CORDS CABLE INDUSTRIES LTD. INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 32 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
3. DELTON CABLES LTD INDIA
4. FINOLEX CABLES LTD INDIA
5. KEC INTERNATIONAL LTD. (FORMERLY RPG CABLES LIMITED
INDIA
6. KEI INDUSTRIES LIMITED INDIA
7. NICCO CORPORATION LTD INDIA 8. PLAZA CABLE INDUSTRIES LIMITED INDIA
9. RADIANT CABLES PVT. LIMITED INDIA 10. RAVIN CABLES LIMITED INDIA 11. TORRENT CABLES LTD. INDIA
12. UNIVERSAL CABLES LTD. INDIA 13. MIRACLE CABLES INDIA 14. POLYCAB INDIA
CABLES FOR EARTHING 1. ADVANCE CABLE TECHNOLOGIES (P) LTD. INDIA 2. DELTON CABLES LTD INDIA
3. FINOLEX CABLES LTD INDIA
4. GUPTA ELECTRIC & MACHINERY STORES (GEMSCAB)
INDIA
5. J K CABLES LIMITED INDIA
6. NETCO CABLE INDUSTRIES (PVT.) LTD. INDIA
7. NICCO CORPORATION LTD INDIA
8. PRESTIGE CABLE INDUSTRIES INDIA
9. SHYAM CABLES INDUSTRIES INDIA
10. SPECIAL CABLES PVT. LTD. INDIA
11. T C COMMUNICATION PVT LTD INDIA
12. UNIVERSAL CABLES LTD. INDIA
CABLE JOINTING KITS
1. RAYCHEM RPG LTD. INDIA
PRE-FABRICATED AL-CABLE TRAYS
1. GLOBE ELECTRICAL INDUSTRIES INDIA 2. HINDUSTAN VIDYUT PRODUCTS INDIA 3. INDIANA ENGG WORKS PVT LTD INDIA 4. INDMARKFORMTECH PVT. LTD. INDIA 5. JAMNA METAL COMPANY INDIA 6. KANADEANANDUDYOG PVT. LTD. INDIA 7. MAHESHWARI ELECTRICAL MFRS. (P) LTD. INDIA
8. METALITE INDUSTRIES INDIA
9. PAREKH ENGINEERING COMPANY INDIA
10. PREMIER POWER PRODUCTS (CALCUTTA) PVT. LTD.
INDIA
11. RUKMANI ELECTRICALS & COMPONENTS PVT LTD INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 33 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
12. SADHANA ENGINEERING CORPORATION INDIA
13. SREEATREYA ENTERPRISES INDIA
14. STEALITEENGG CO INDIA
PRE-FABRICATED G.I. CABLE TRAYS
1. GLOBE ELECTRICAL INDUSTRIES INDIA 2. INDIANA ENGG WORKS PVT LTD INDIA 3. INDMARKFORMTECH PVT. LTD. INDIA 4. JAMNA METAL COMPANY INDIA 5. KANADEANANDUDYOG PVT. LTD. INDIA 6. MAHESHWARI ELECTRICAL MFRS. (P) LTD. INDIA
7. METALITE INDUSTRIES INDIA
8. PAREKH ENGINEERING COMPANY INDIA
9. PREMIER POWER PRODUCTS (CALCUTTA) PVT. LTD.
INDIA
10. RUKMANI ELECTRICALS & COMPONENTS PVT LTD INDIA
11. SADHANA ENGINEERING CORPORATION INDIA
12. SLOTCO STEEL PRODUCTS PVT. LTD.
13. SREEATREYA ENTERPRISES INDIA
14. STEALITEENGG CO INDIA
HOSE PROOF LOCAL CONTROL STATION 1. BALIGA LIGHTING EQUIPMENTS LIMITED INDIA 2. BHARTIA INDUSTRIES LTD. (DIVN. BCH) INDIA
3. C & S ELECTRIC LTD. INDIA
4. EX-PROTECTA
5. FCG FLAMEPROOF CONTROL GEARS PVT. LTD. (FORMERLY CEAG FLAME)
INDIA
6. FCG POWER INDUSTRIES LTD. INDIA 7. FLAMEPROOF EQUIPMENTS PVT. LIMITED INDIA 8. HOTLINE SWITCHGEAR & CONTROLS INDIA
9. POWER ENGG CO INDIA
HOSE PROOF JUNCTION BOXES
FRP CABLE TRAYS 1. ENERCON INDIA 2. ERCON COMPOSITES (UPTO 600 MM WIDE) INDIA 3. KEMROCK INDIA 4. SATYAM INDUSTRIES INDIA 5. SINTEX INDUSTRIES LTD. INDIA 6. SUMIP COMPOSITES PVT LTD. INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 34 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
1. BALIGA LIGHTING EQUIPMENTS LIMITED INDIA 2. BHARTIA INDUSTRIES LTD. (DIVN. BCH) INDIA 3. EX-PROTECTA INDIA 4. FCG FLAMEPROOF CONTROL GEARS PVT. LTD.
(FORMERLY CEAG FLAME) INDIA
5. FLAMEPROOF EQUIPMENTSPVT. LTD. INDIA 6. FCG POWER INDUSTRIES LTD INDIA
EARTHING & LIGHTNING PROTECTION MATERIAL – (AL) WIRE/STRIP
1. ANAND ELECTRIC TRADING CO. INDIA 2. C & S ELECTRIC LTD. INDIA 3. INDMARKFORMTECH PVT. LTD. INDIA 4. JAYANT METAL MFG. CO. INDIA 5. PREMIER POWER PRODUCTS (CALCUTTA) PVT.
LTD. INDIA
6. JAMNA METAL COMPANY INDIA 7. MAHAVIR INDUSTRIAL CORPORATION INDIA
8. METROPOLITAN INDUSTRIES INDIA
9. SAI GALVANISERS & FABRICATORS PVT LTD INDIA
EARTHING & LIGHTNING PROTECTION MATERIAL – (GI) WIRE/STRIP
1. ANAND ELECTRIC TRADING CO. INDIA 2. CONTROLS & SWITCHGEAR CO. LTD. INDIA 3. JAYANT METAL MFG. CO. INDIA 4. INDMARKFORMTECH PVT. LTD. INDIA 5. PREMIER POWER PRODUCTS (CALCUTTA) PVT.
LTD. INDIA
6. JAMNA METAL CO. INDIA 7. MAHAVIR INDUSTRIAL CORPORATION INDIA
8. METROPOLITAN INDUSTRIES INDIA
9. SAI GALVANISERS & FABRICATORS PVT LTD INDIA
10. BHARTI EXPORTS INDIA
11. METALITE INDUSTRIES INDIA
12. RUKMANI ELECTRICALS & COMPONENTS PVT LTD INDIA
13. SADHANA ENGINEERING CORPORATION INDIA
14. STEALITEENGG CO INDIA
GI PIPES & CONDUITS
1. BHARTI EXPORTS INDIA
2. INDIAN TUBE CO. (TATA DIV. OF TUBES & PIPES) INDIA
3. JINDAL PIPES LTD. INDIA
4. MEGHJYOT ENTERPRISES INDIA
5. RUKMANI ELECTRICALS & COMPONENTS PVT LTD INDIA
6. STEELCRAFT INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 35 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
INDUSTRIAL CABLE GLAND 1. BALIGA LIGHTING EQUIPMENTS LIMITED INDIA 2. COMET BRASS PRODUCTS INDIA 3. COMET INDUSTRIES INDIA 4. DOWELL'S ELECTRICALS INDIA 5. ELECTROMAC INDUSTRIES INDIA 6. FCG FLAMEPROOF CONTROL GEARS PVT. LTD.
(FORMERLY CEAG FLAME INDIA
7. GLAND-MECH. INDUSTRIES INDIA 8. INDUSTRIAL PRODUCTS EQUIPMENT INDIA 9. POWER ENGG CO INDIA 10. QUALITY & PRECISION INDL. EQUIPMENT INDIA 11. S J METAL INDUSTRIES (JAINSON) INDIA
CABLE LUGS
1. DOWELL'S ELECTRICALS INDIA 2. FORWARD ENGG INDUSTRIES INDIA 3. KSE ELECTRICAL PVT. LTD. INDIA 4. MG ELECTRICA INDAI 5. POWER ENGG CO INDIA 6. S J METAL INDUSTRIES (JAINSON) INDIA 7. USHA MARTIN INDUSTRIES LTD. (ISMALDIVN) INDIA
Rev.
SCHEDULE OF RATES (SOR)
1
PNPM/PC‐
150/E/112/NCB/
SEC‐VII
Document No.
FOR MECHANICAL WORKS (SUPPLY & ERECTION)
FOR
CONSTRUCTION OF RAW WATER AND FIRE WATER RESERVOIR AND PUMP HOUSE & ALLIED FACILITIES
SCHEDULE OF RATES FOR MECHANICAL WORKS (SUPPLY & ERECTION)
For Issuance For Issuance
Issued for review & Comment
AT
TALCHER FERTILIZERS LTD., ANGUL ODISHA
10P
REV
JKYDILIPDILIP
CHECKED BYPREPARED BY APPROVED BY
GCGC
GC
DESCRIPTION
16.12.1914.03.19
JKYDILIPDILIP
RAW WATER AND FIRE WATER RESERVOIR AND PUMP HOUSE & ALLIED FACILITIES
26.02.19
DATE
FORM NO: 02‐0000‐0021F2 REV1 SHEET 1 of 1 All Rights Reserved
S. No. GENERAL INSTRUCTIONS TO BIDDER1 The Schedule of Rates is to be read in conjunction with Technical Specification for Electrical System for Construction of Raw Water Reservoir
and Allied Services & its attachments and other relevant sections / sub sections of NIT.
2 The rates shall be applicable for all floors, heights and depths.3
This being an item rate contract, the unit rate shall prevail, correction of errors (if any) shall be done as per clause no. 30 Section III of ITB.
4 Owner/Consultant reserves the right to interpolate or extrapolate the rate for any item, which is not covered in the Schedule of rates, from the rates available for similar item / work in the Schedule of Rates.
5 Whenever it is mentioned in the specifications that the bidder shall perform certain work or provide certain facilities/materials or certain item or activity is in bidder’s scope of services it is understood that the bidder shall do so at his cost within the item rates unless expressly stated otherwise.
6 Unit rates for erection shall inclusive of Unloading from Truck/ Trailer, transportation from store (at site), handling, the cost of labour, supervision, all consumables, cost towards providing erection materials & hardware, necessary tools and tackles, and providing all the required facilities for execution and inspection, testing and commissioning, guarantees etc. Minor repair and touch painting work towards providing all required facilities for execution shall be in bidder’s scope.
7 Work shall involve, at every stage, correct identification of all equipment including loose equipment from stores, identifying spare items/ excess items, listing the same and carefully storing them under the custody of the contractor. Information to this extent shall be passed on to the concerned Owner’s Engineer-in-charge / owner. Certification of balance items after erection and return to the Owner’s Engineer in-charge so assigned.
8 All equipment shall be deemed to have clear tags, descriptive letter writing indicating locations / sources (from - to), cable sizes, circuit no., unit no., and any other writing required to make installation completely informative. All costs in view of above shall be deemed to have been included in installation/ commissioning.
9 All primary & secondary injection tests & testing of relays and other equipment as per relevant IS, code of practice for testing and commissioning shall be deemed to have been included for testing & commissioning. No extra charges shall be provided for that. Testing of motors, including re-greasing, and at least 4 hour run shall be included in the motor testing & commissioning.
10 This being a grass root job, the Contractor must visit TFL, Talcher site to assess the quantum and nature of work before quoting. However, the Contractor shall inform PDIL / TFL, 1 week prior to their visit.
11 Quantities mentioned in the Schedule of Rates are indicative and not exhaustive in nature. Payment shall be made as per actual quantity used/certified at site by Owner’s Engineer-in-charge.
12Contractor shall indicate the prices of all electrical items as per attached documents. The quantities indicated in Schedule of Rates are estimated quantities and may change during detailed engineering as per site condition. Quantity of some or all the items may increase or decrease up to any extent at the time of actual execution, for variation in value of contract please refers clause no. 60.2 of GCC.
PREAMBLE TO SCHEDULE OF RATES FOR RAW WATER AND FIRE WATER RESERVOIR, PUMP HOUSE AND SERVICES AT TFL TALCHER
13 The Tenderers shall note that the quantities of the different Items, as given in the "Schedule of Rates" are tentative based on tentative tender drawings and are subject to variation and they shall not be entitled to claim any higher rate or compensation on this account. Owner / Consultant reserve the right to change / modify the size and type of sections at any time. Owner / Consultant do not guarantee work under each item of the Schedule of Quantities. Quantity of some or all the items may increase or decrease up to any extent at the time of actual execution, for variation in value of contract please refers relevant clause of GCC.
14 Un-priced Price Schedule indicating the word “Quoted” (with prices blanked out) against each item shall be attached with bid documents for
15 Owner reserve their right to execute any additional works / extra works, during the execution of Work, either by themselves or by appointing any other agency, even though such works are incidental to and necessary for the completion of works awarded to the Contractor. In the event of such decisions taken by Owner, Contractor is required to extend necessary cooperation, and act as per the instructions of Engineer-in-Charge.
16 Before procurement of any equipment / material, the Contractor shall submit drawing / document, Compliance Statement supported by
17 Quoted rates shall also cover the cost towards fabrication of steel structure, its painting with two coats of epoxy paint, after surface
18 All GI materials shall have zinc coating of 610 gm/Sq.m at any point on its surface unless indicated otherwise in the schedule of rates. 19 The portion, which is under "HOLD" shown in the approved drawing (if any) or the portion, which would be brought under "HOLD" during
20 Quoted rates shall remain firm till completion of work including all extensions granted for any reasons whatsoever.21 All heavy machinery including Cranes, Hydra, etc for the job (if required) shall be in the bidder’s scope.22 Bidders are required to undertake all the safety precautions as deemed fit and necessary by statutory authorities and/or
23The plans have been evolved tentatively based on information available with Owner / Consultant but the dimensions and details etc. are liable to changes. The Tenderers shall not be entitled to claim any higher rate or compensation on this account. The tender drawings are intended mainly to give an indication of the probable type of construction. The successful Tenderers will, however, be required to execute the work as per detailed approved drawings issued to them from time to time. Steel structures can be changed to R.C.C. or vice versa. Owner reserves the right to add / delete any of the building works mentioned in the N.I.T., during the currency of the contract..
24 The Tenderers shall be fully responsible for the correct setting out and execution of the work in accordance with approved drawings which will be supplied to them progressively. All tools, tackles, construction equipments etc., required for the successful execution / construction of the complete work shall be responsibility of the Tenderers.
25Quantities indicated in Schedule of Rates are approximate and subject to variation on either side. The quantity of individual item may be deleted. Contractor shall not be entitled for any compensation on this account and the quoted rates shall hold good for such quantity variationsetc. Payments on bills shall, however, be made on actual measurements of quantities of work done as per approved drawings. Unless otherwise specified, measurements of civil quantities shall be taken as per Indian Standards IS: 1200.
26 The rates to be inserted in the "Schedule of Rates" are to be inclusive of the value of the work described under several items including all costs and expenses which may be required for the construction of the work described together with all taxes, general risks, liabilities and obligations such as temporary buildings / hutments, fencing, watching, lighting, insurance, labour regulations, indemnity, maintenance and the like. The prices shall be inclusive of all labours, materials, tools, plants, equipment, hoists, tackles, scaffoldings, the sundries, etc., as may be necessary for the completion of the work in all respects.
27 Any fabrication / construction done before final approval of the drawings shall be the Contractor's responsibility.
28No work shall be undertaken at site until detailed approved drawings have been issued by the Owner / Consultant in writing. Subsequent revision in the drawings which become necessary shall be incorporated and revised drawings issued to the Contractor who shall execute the work as per the latest revised drawings. Nothing extra will be paid on this account and no claim whatsoever will be entertained on this account. The Owner / Consultant reserves to themselves the right to modify / revise / alter etc. in any drawing supplied to the Contractor.
29In case of any discrepancy between the description of items given in the "Schedule of Rates" and Specifications, drawings and other documents, the decision of the Owner / Consultant in writing shall be final, binding and conclusive for the purpose of this contract.
30 The term "Design and drawings" mentioned in the description of Items in the "Schedule of Rates" means the detailed approved design drawings marked "Good for Construction".
31 The work "As described", "As shown", "As directed" or "As approved", "As mentioned" in the description of Items shall mean as directed in design or detailed drawings and as directed by the Engineer-in-Charge.
1
2
3
4
5
6
7
Bidder
Name :
1
i MT 25 INR 0.00 No Rupees Only
2
Tender Inviting Authority : PDIL on behalf of Talcher Fertilizers Ltd.
Stactic / Moving machineries
SUPPLY & ERECTION OF NEW EQUIPMENTS & MACHINERIES ETC.
PART ‐A
Notes :
NIT Ref. : PNPM/PC‐150/E/112/NCB
The order will be placed on overall lowest (L‐1) basis.
Quoted
CurrencyUNITS
Unloading from trailer, truck, etc. and placing on firm ground over suitable support / sleepers
etc. as desired by Owner/Consultant at a place to be decided by Owner/Consultant of
equipment foundations. However, effort shall be made to erect the equipment directly from
tailor to foundation to avoid unloading for which payment shall not be made against
unloading of equipment.
UNLOADING OF EQUIPMENT
BASIC UNIT PRICE In
Figures To be entered by
the Bidder
(Including all taxes,
duties, levies, etc, except
GST )
TOTAL AMOUNT in
Figures
(Including all taxes,
duties, levies, etc, except
GST )
S.No DESCRIPTIONAPPROX
QTY.
SCHEDULE OF RATES FOR EQUIPMENTS AND PIPING WORKS
Prices shall be quoted strictly as per the Price Schedule Format made available herein without altering any of the contents of the "Price Schedule Format".
Vendor shall include Prices towards all Mandatory & Commissioning Spares, Special Tools & Tackles, Export Sea‐worthy Packing, Forwarding, FOB Charges, Inland Freight, Testing & Third
Party Inspection Charges, Insurance upto Port of Exit, Loading (on ship), all duties and Taxes, other charges payable outside India including Export Licensing etc. Supplier shall be responsible
and no additional cost/ time shall be paid in case commissisonig spares/ special tools & tackles over and above those quoted by supplier are required.
PRICE SCHEDULE
(This BOQ Template must not be modified/ replaced by the Bidder and the same should be uploaded after filling the relevant columns, else the Bidder is liable to be rejected for this Tender. Bidders are allowed to enter the
Bidder Name and Numeric Values only)
Name of Work : CONSTRUCTION OF RAW WATER AND FIRE WATER RESERVOIR, PUMP HOUSE AND SERVICES AT TALCHER FERTILIZERS LTD., ANGUL, ODISHA
TOTAL AMOUNT in Words
(Including all taxes, duties, levies, etc, except
GST )
Per diem rates as quoted by the Bidder, shall be basis for payment in case assistance is required during commissioning however actual payment for service shall be based on actual mandays
consumed at site.
Please submit Unpriced copy of this Price Schedule indicating either "QUOTED" or "NOT QUOTED" against each item.
Please enter Value in Cells Highlighted in Yellow only.
Price to be entered in Indian Rupees Only
FORM NO: 02‐0000‐0021F2 REV1 SHEET 1 of 30 All Rights Reserved
i Nos 3 INR 0.00 No Rupees Only
ii No. 1 INR 0.00 No Rupees Only
3
Lot 1 INR 0.00 No Rupees Only
Complete works of supply & Erection of Pumps, Motors, Machineries, flanges, fittings,
transportation and inspection charges but not limited to, the following items in accordance
with PMS (piping material specification), relevant specifications & drawings indicated in
Technical specification under this tender documents and instructions of Engineer‐in‐charge
and as per all provisions of the CONTRACT.Transportation of Equipments/SKID etc. from
Owner/ Consultant’s stores/storage yard; dismantling & reassembly / reinstatement of
structures, building sheets (if required) etc., to facilitate for erection, assembly of parts / sub‐
assemblies; checking, cleaning, chipping and preparing the top of foundation and cleaning of
pockets for erection; placing the equipments, machinery & SKID etc., on foundation or
structure;
Rates shall include cost of labour, deployment of tools & tackles, consumables, Materials and
other associated arrangements required to execute all activities. Grouting shall be paid as per
Cl. 2.0 of SOR when using SHRINKOMP or equivalent. For cost of grouting using ordinary
grouting, including supply of materials shall be included in the unit rates of erection of
equipments, machinery & SKID etc. without any extra cost to Owner.
MOVING MACHINERY PUMPS WITH ITS DRIVE MOTOR ETC.FOR Water supply to Raw Water
Reservoir AS PER TS IN NIT
MOVING MACHINERY PUMPS WITH ITS DRIVE MOTOR ETC.FOR for makeup water supply to
Fire water reservoir AS PER TS IN NIT
SUPPLY & ERECTION OF EOT CRANE
Supply & Erection of EOT Crane (Double girder) of Suitable capacity including its drives and
all other relevant electrical items as per TS attached elswhere in the tender documents.This
covers the technical requirements of design, engineering,manufacture, testing at works,
supply at site, erection, site testing and commissioning of the complete electrical equipment
and accessories as required for the overhead travelling crane and hoists.
leveling, alignment, bolting, welding, grouting; fixing of internals; first maintenance &
carrying out testing / carrying out alignment, trial runs and start up runs and providing
manpower for testing, rectifying and defect and completion of works in all respects including
earthing protection by way of fixing strips and electrodes as per drawings & specifications.;
completion of all jobs as per drawings, scope of work & technical conditions as defined in the
enquiry specifications, standards, codes and all jobs are to be carried out as per the
instruction and to the full satisfaction of the Engineer‐in‐Charge/Owner. Job also includes
supplying of all types of tools, tackles, lifting arrangements, tractor trolley & equipments,
machineries all consumables and labour to complete the job in a workman like manner,
erection and removal of steel scaffolding wherever required, area preparation for hot job
and area cleaning after completion of work including blinding, deblinding, removal of
insulation, gas cutting of bolts, chipping of foundation, flushing wherever required.
FORM NO: 02‐0000‐0021F2 REV1 SHEET 2 of 30 All Rights Reserved
4
i M3 2 INR 0.00 No Rupees Only
5
5.1
i MTR. 192 INR 0.00 No Rupees Only
ii MTR. 264 INR 0.00 No Rupees Only
iii MTR. 114 INR 0.00 No Rupees Only
5.2
20",OD 762
36",OD 914
ASME B36.10
ASME B36.10
ASME B36.10
VALVE
GATE VALVE
Arrangement of all additional lands required for Contractor's storage, fabrication, access for
construction, etc. procurement and supply of all materials, consumables, equipment, labour
and other inputs, carrying out all temporary, ancillary, auxiliary works, etc. make ready for
commissioning of pipeline as per drawings, specifications, other provisions of Contract
document and instructions of Engineer‐in‐charge, including but not limited to carrying out
the following works.
Barricading the pipeline construction area prior to execution to the entire satisfaction of
Owner / Engineer‐in‐charge.
SHRINKOMP‐20 Or Conbextra GP‐2
ITEM SIZE SPECN SCH/THK MATERIAL
SCH 10
SCH 10
Pipes
SCH XS
ERW,API 5L GR.B
ERW,API 5L GR.B ,C & W
ERW/SAW,ASTM API 5L
GR.B
CS PIPES BE
CS PIPES BE
CS PIPES BE
20",OD 508.0
GROUTING
Grouting works include supply of materials, manpower, and necessary arrangement for
application of grouting as per technical specification, vendor’s requirement and instruction of
Owner/Consultant. Machineries with ≥500 H.P., Araldite of M/s CIBA Geigy or equivalent
shall be used. For tall towers having height more than 10 Meter and weight more than 25
MT, SHRINKOM ‐ 20 or Conbextra GP‐2 shall be used. However, for balance equipments /
machineries and structurals ordinary 1:1:2 cement grout mix added with anti‐shrinkage
compound shall be used without any extra cost to Owner.
Carrying out inspection of materials including line pipes at the time of laying/ installation of
line pipes, associated valves, tees, insulating joints, flanges & fittings for buried application of
all sizes, thickness & ANSI class rating and accessories as per specification wherever required
depending on site condition.
SUPPLY OF PIPING ITEMS
FOR U/G PIPING
"Supply , taking over" as defined in the specifications, handling, loading, transportation,
unloading and Laying of bare/coated line pipes and other materials like valve, fittings,
flanges, from Contractors suppliers locations/works etc. to Contractor's stock
yard/workshop/work‐site including preliminary activities, preparation of drawings, wherever
required for crossing etc. Handling, stacking, stringing of the UG pipes ,
FORM NO: 02‐0000‐0021F2 REV1 SHEET 3 of 30 All Rights Reserved
i Nos 5 INR 0.00 No Rupees Only
ii Nos 19 INR 0.00 No Rupees Only
iii Nos 11 INR 0.00 No Rupees Only
iv Nos 4 INR 0.00 No Rupees Only
5.3
i Nos 4 INR 0.00 No Rupees Only
5.4
i Nos 4 INR 0.00 No Rupees Only
ii Nos 33 INR 0.00 No Rupees Only
iii Nos 13 INR 0.00 No Rupees Only
5.5
i Nos 12 INR 0.00 No Rupees Only
ii Nos 60 INR 0.00 No Rupees Only
iii Nos 39 INR 0.00 No Rupees Only
5.6
i Nos 90 INR 0.00 No Rupees Only
36”ASME B16.47
SR.B
150 #
150 #,SCHXS
GASKET (SPRL‐
WND RF)
GASKET(SPRL‐WND
RF)
20”
36”
ITEM SIZE SPECN SCH/THK MATERIAL
GASKET (SPRL‐
WND RF)18” ASME B16.20 150#
ASTM A105,WN‐RF 125
AARH
ITEM SIZE SPECN SCH/THK MATERIAL
FLANGE(WELD
NECK)
GASKET
36” GAV210 150#
CS BODY ASTM A216 GR
WCB
FLANGES
ITEM SIZE SPECN
150#CHECK VALVE
(FLNG)20" CHV210
MATERIAL ITEM SIZE SPECN
CS BODY ASTM A216 GR
WCB
CHECK VALVE
STUD & NUTS
ITEM SIZE SPECN SCH/THK MATERIAL
ASTM A193 GR.B7/ASTM
A194 GR.2H
150#
TP304 SS WDG;GPH
FLR;TP304 SS INR RNG;CS
OTR RNG
ASME B16.20
TP304 SS WDG;GPH
FLR;TP304 SS INR RNG;CS
OTR RNG
ASTM A105, SO‐RF 125
AARH
ASTM A105, SO‐RF 125
AARH
SCH/THK
TP304 SS WDG;GPH
FLR;TP304 SS INR RNG;CS
OTR RNG
STUD & 2NUTS
HVY HEX11/8" 150
ASME
B16.20/B16.4
7 SR.B
150#
18” ASME B16.5 150 #
GATE VALVE(FLNG)
GATE VALVE(FLNG) 20” GAV210 150#CS BODY ASTM A216 GR
WCB
FLANGE
(SLIP ON)
CS BODY ASTM A105,
SOCW
GAV201 800#
SCH/THK
CS BODY ASTM A105GATE VALVE
(SOCW)1/2”
GATE VALVE
(SOCW)3/4” GAV201 800#
20” ASME B16.5
FLANGE
(SLIP ON)
MATERIAL
FORM NO: 02‐0000‐0021F2 REV1 SHEET 4 of 30 All Rights Reserved
ii Nos 560 INR 0.00 No Rupees Only
iii Nos 582 INR 0.00 No Rupees Only
5.7
i Nos 37 INR 0.00 No Rupees Only
ii Nos 10 INR 0.00 No Rupees Only
5.8
i Nos 4 INR 0.00 No Rupees Only
ii Nos 2 INR 0.00 No Rupees Only
5.9
i Nos 4 INR 0.00 No Rupees Only
5.10
i Nos 10 INR 0.00 No Rupees Only
ii Nos 4 INR 0.00 No Rupees Only
5.11
i No. 1 INR 0.00 No Rupees Only
ii No. 1 INR 0.00 No Rupees Only
iii Nos 2 INR 0.00 No Rupees Only
5.12
i No. 5 INR 0.00 No Rupees Only
ii No. 18 INR 0.00 No Rupees Only
ASTM A234 WPB‐WLDD
ASTM A193 GR.B7/ASTM
A194 GR.2H
3000#
SOCKOLET
ASTM A234 WPB‐WLDD,
BW
ITEM SIZE
TEE (BW) 36X36
ASTM A234 WPB‐WLDD
SCH/THK MATERIAL
ITEM SIZE SPECN SCH/THK MATERIAL
ELBOW
ELBOW 900, 1.5D 36”BW ASME B16.9 SCH XS
275ASTM A193 GR.B7/ASTM
A194 GR.2H
11/8" 160
20”BW ASME B16.9 SCH 10
STUD & 2NUTS
HVY HEX
STUD & 2NUTS
HVY HEX11/2"
MSS SP 97
ASTM A234 WPB‐WLDD
SOCKOLET
(SOCW)
TEE
ELBOW 900, 1.5D
SCH/THK
ASTM A105
ASTM A105
ASTM A105
ASME B16.9 SCH XS X
SCH XS
TEE (BW) 20X20 ASME B16.9 SCH10 X
SCH10
REDUCER ECC.(BW) 20"X18" ASME B16.9SCH10X SCH
10,
150#,RF 125
AARH
SPECN SCH/THK MATERIAL
SPECL BLIND
FLANGE
ASTM A234 WPB‐WLDD,
BW
ITEM SIZE SPECN
ITEM SIZE SPECN SCH/THK
REDUCER
ITEM SIZE SPECN MATERIAL
MATERIAL
ASTM A105
SOCKOLET
(SOCW)36"X3/4” 3000# ASTM A105
20"X3/4” MSS SP 97
ITEM SIZE SPECN SCH/THK MATERIAL
BLIND FLANGE 36”ASME B16.47
SR.B
150#,RF 125
AARH
BLIND FLANGE 40”ASME B16.47
SR.B
150#,RF 125
AARH
CAP(CS)
20” ASME B16.48
BLIND FLANGE
CAP, THD 1/2" ASME B16.11 3000# ASTM A105
CAP, THD 3/4" ASME B16.11 3000# ASTM A105
FORM NO: 02‐0000‐0021F2 REV1 SHEET 5 of 30 All Rights Reserved
5.13
i Nos 9 INR 0.00 No Rupees Only
ii Nos 9 INR 0.00 No Rupees Only
iii Nos 15 INR 0.00 No Rupees Only
iv Nos 20 INR 0.00 No Rupees Only
5.14
i Nos 6 INR 0.00 No Rupees Only
6.0
6.1
ASME B36.10 SCH160
NIPPLE, PLN‐PLN 3/4" ASME B36.10 SCH160
SCH/THK MATERIAL
SMLS,API 5L GR.B
SMLS,API 5L GR.B
SMLS,API 5L GR.B
SMLS,API 5L GR.B
BRANCH WELD WITH RP
ITEM SIZE SPECN SCH/THK MATERIAL
NIPPLE, PLN‐THD,
NPT1/2" ASME B36.10 SCH160
NIPPLE, PLN‐PLN 1/2" ASME B36.10 SCH160
ITEM SIZE SPECN
NIPPLE, PLN‐THD,
NPT
CARBON STEEL BW
FABRICATION & ERECTION OF ABOVE GROUND (A‐G) PIPING
Transportation of all piping materials from storage point to work site/shop including from
shop to work site, cleaning, stacking, surface preparation/shot blasting of piping, supply &
application of paints and primers (including all coats‐primer, intermediate & final coats) for
piping and equipments as per enclosed painting specification in NIT,prefabrication /
fabrication at shop and/or site including marking, cutting, edge preparation, beveling,
bending, etc., providing all branch connections, re‐enforcement pads, threading etc., welding
of all fitting and specials, erection including lifting, placing, installing of supports etc. at all
levels and locations, leveling, aligning, jointing of flanges including insertion of gaskets, orifice
plates, spectacle blinds etc., bolting, joining by threading or welding, ,connecting the system
to the required other system, equipments, pumps, including hook up of new lines with
existing lines, and welding of Tie‐in points as per tie‐in list, installation of all in line fittings /
all type of valves / Instruments / strainers / filters / spray nozzles / traps, safety / control
valves rapture disc, flow meters, flow orifice etc. as applicable including shifting to &
collection from painting contractor’s shop for erection, hydro testing, flushing and blowing,
seal/leak testing and making ready for commissioning as per drawings, specification
,standards ,codes, instructions of Owner/Consultant and scope of work defined in
Tender. Welding shall include all the examination and testing required such as but not
limited to radiography, ultrasonic, magnaflux /dye check etc and pre and post heat
treatment wherever required.
The cost towards radiography only shall be paid separately as per SOR Cl.7.0 . Unit rates shall
include the cost of supervision, labour, overheads/profits, consumables, and other
associated arrangements required to execute all the related activities.
The quoted rates shall include seal welding of thermocouples, Orifice flange plug, nipple, and
hydro testing drain and vents caps.
NB SCH/THKO.D.
PIPE: SMLS,API 5L GR.B/ERW,API 5L GR.B
BRANCH WELD
WITH RP36"X20" ASME B31.3
SCHXS X
SCH10
NIPPLE
3/4"
FORM NO: 02‐0000‐0021F2 REV1 SHEET 6 of 30 All Rights Reserved
i Mtr. 10 INR 0.00 No Rupees Only
ii Mtr. 210 INR 0.00 No Rupees Only
iii Mtr. 120 INR 0.00 No Rupees Only
6.2
A
i M3 500 INR 0.00 No Rupees Only
iiM3 200 INR 0.00 No Rupees Only
iii
M3 200 INR 0.00 No Rupees Only
iv
M3 250 INR 0.00 No Rupees Only
VI
M3 500 INR 0.00 No Rupees Only
viM3 100 INR 0.00 No Rupees Only
3/4"
20"
Same as above but lift from 1.5 Mtr.to 3.0 Mtr.
Providing and filling with fine river sand in trenches a layer of 150 mm from BOP(Bottom of
pipe) and 200 mm top of pipes(In case of pipe size>24" NB) and for pipe<24" filling of sand in
trenches shall be 150mm from BOP and 100 mm from top of pipe including watering,
ramming, consolidating and complete dressing.
Filling with available earth excavated without stones & unwanted materials in the treanches
in layer other than Sr. No. III. In depth consolidation each deposited layer by ramming and
watering all complete.
Removal or excess excavated materials after back filling of trenchesfrom site of work to other
area in factory premises, as directed by ownerand spreading and leveling the same.
Cutting and disposal of RCC, PCC and paved surface at all level other than I & II
36"
26.7
508
762
SCH 80
SCH 10
SCH XS
UNDER GROUND (U‐G) PIPING WORKS:
EARTHWORK
Excavation of trenches for pipelines in all kinds of soil including soft and hard rock mixed in
nature both dry and wet conditions including dressing of sides and bottom getting out
excavated material in the approved dump yard in all leads of 100 meter including spreding
and leveling as per instruction of owner/Consultant.
FORM NO: 02‐0000‐0021F2 REV1 SHEET 7 of 30 All Rights Reserved
B
i Mtr. 275 INR 0.00 No Rupees Only
C
i Sq. M. 500 INR 0.00 No Rupees Only
7.0 ERECTION OF VALVES
FABRICATION & ERECTION OF UNDER GROUND (U‐G) PIPING‐ERW,API 5L GR.B/SMLS,API 5L
GR.B:‐"Taking over" as defined in the specifications, handling, loading, transportation,
unloading and Laying of bare/coated (Wrapping coating shall be paid seperatly as per clause
no‐4c) Piping and other materials like valve, fittings, flanges, from Contractors suppliers
locations/workws etc. to Contractor's stock yard/workshop/work‐site including preliminary
activities, preparation of drawings, wherever required for crossing etc. Handling, stacking,
stringing of the UG pipes , Carrying out inspection of materials including line pipes at the time
of laying/ installation of pipes, associated valves, tees, insulating joints, flanges & fittings for
buried application of all sizes, thickness & ANSI class rating and accessories as per
specification wherever required depending on site condition. Arrangement of all additional
lands required for Contractor's storage, fabrication, access for construction, etc. procurement
and supply of all materials, consumables, equipment, labour and other inputs, carrying out
all temporary, ancillary, auxiliary works, etc. make ready for commissioning of pipeline as per
drawings, specifications, other provisions of Contract document and instructions of Engineer‐
in‐charge,Barricading the piping construction area prior to execution to the entire
satisfaction of Owner / Engineer‐in‐charge.
SCH/THK
SCH 10
O.D.
50820"
NB
COATING AND WRAPPING OF UNDERGROUND PIPING
Procurement and supply of all Cold Tape type coating and wrapping materials, manpower,
equipments, consumables and necessary arrangements for surface preparation and
application shall be in the scope of Contractor. All oil, grease, rust, mill scale, soil, dust,
previous paint if any or foreign matters shall be completely removed from pipe surface prior
to priming. Surface cleaning and preparation shall consist of cleaning and degreasing by Grit /
Shot blasting and or power scraping, using most suitable method or a combination therefore,
both followed by carefully removal of the dust according to the specification ISO 8501‐1:
1988 SA 2.5.
The coating continuity shall be visually 100% checked by electric Holiday detector to detect
and search of particles and other inclusion, pinholes, cavities, cracks and other ruptures. All
defects visually detected or by Holiday detector shall be clearly marked and all defects in the
coating shall be made good immediately after their inspection.
COATING AND WRAPPING OF UNDERGROUND PIPING: As per C&W‐TS
Cold Tape Type (Two layer = Inner wrap and Outer wrap.)
FORM NO: 02‐0000‐0021F2 REV1 SHEET 8 of 30 All Rights Reserved
A
i Nos 15 INR 0.00 No Rupees Only
ii Nos 4 INR 0.00 No Rupees Only
B
i Nos 20 INR 0.00 No Rupees Only
i
ii
iii
8.0
A
PIPE SUPPORTS
SUPPLY & FABRICATION OF PIPE SUPPORTS
Supply & Fabrication of pipe supports as per drawings, standards, Specifications, NIT
conditions & instructions of Owner/Consultant. The rate shall include the cost of materials
, consumables, surface preparation & application of primer, labour overheads/profits
etc.
PS 1
FLANGED/SCREWED VALVES
20” to 24"
30” to 36"
SW/BW VALVES
Up to 3/4"
Above includes valves of all materials, rating, IBR/Non IBR.
Above includes all types of valves.
CATEGORY MATERIAL OF CONSTRUCTION
Means carbon steel supports.
Means alloy steel supports (Alloy steel parts of supports only)
Means stainless steel supports (SS parts of Support only)
PS 2
PS 3
WAFER TYPE VALVES shall be treated as flanged valves
NOTES:
Transportation from storage points to shop/site, (including testing and setting of safety
valves but excluding testing of control valves which shall be issued from Owner/
Consultant's stores or instrument contractor's shop/stores), installation in position by
threading, bolting or welding as per drawings, specifications, standards / codes,
instructions of Owner/Consultant and scope of work defined in NIT. Welding shall include
all the examination and inspection required such as but not limited to radiography,
ultrasonic, magnaflux, dye check etc, pre and post heat‐treatment wherever required.
The cost towards radiography shall be paid separately as per Cl 7 of Schedule of Rates,
whereas the cost of all other tests is included in the rates quoted as per Cl. 5.0 Of
Schedule of Rates. Rates shall also include the cost of supervision, labour, Overhead /
profits, consumables, statutory approval and conditions listed in preamble to Schedule of
Rates and other associated arrangements required to execute all the related activities.
The quoted rates shall also include tightening of gland packing and bonnet flange of valves if
required during hydro‐testing of piping.
Description
FORM NO: 02‐0000‐0021F2 REV1 SHEET 9 of 30 All Rights Reserved
i MT 2 INR 0.00 No Rupees Only
B
MT 10 INR 0.00 No Rupees Only
i
ii
9.0
A
All structural work under this enquiry has been divided in to two categories:
CATEGORY‐A
Equipment platforms , valve operating platforms, ladders and
hand railing (but excluding gratings) and any other additional
equipment supports, if required , to be fabricated at site.
Galvanized Gratings (35 mm)CATEGORY‐B
PS 1
Category of Supports
STRUCTURAL STEEL WORKS
The rates for above items shall be quoted for supply, fabrication and Erection as per the
format below. Structural steel is also to be arranged and supplied by CONTACTOR.
Supply, Fabrication & Erection of Steel Structure
Notes for 8 (a) & (b):
Irrespective of whether pipe supports and/or pipe support materials are
supplied by Contractor or Vendor, all fasteners such as bolts, studs, nuts,
washers etc., are to be supplied by Contractor at his cost.
PS 6
PUF supports
Means Turn buckles (Forged)
Means Spring support (Free Issue)
PS 4
ERECTION OF PIPE SUPPORTS
Erection of supports fabricated by Contractor and/or supplied by vendors. The rate shall
include cost of erection as part of piping, welding (including dissimilar welding), labour,
consumables, application of finish paint, overheads/profits etc to complete all related
activities as per ITB and instruction of Owner/ Consultant.
Category of Supports
PS‐1
PS 5
Welding for supports shall include preheating and all tests (excluding
radiography & stress relieving, which shall be paid separately) such as dye‐
penetrent test, hardness test etc. as required by standards, codes, specifications
and instructions of Owner/Consultant.
FORM NO: 02‐0000‐0021F2 REV1 SHEET 10 of 30 All Rights Reserved
MT 1 INR 0.00 No Rupees Only
MT 0.5 INR 0.00 No Rupees Only
1
2
3
10.0
A
i Inches 100 INR 0.00 No Rupees Only
ii Inches 110 INR 0.00 No Rupees Only
B
i Inches 100 INR 0.00 No Rupees Only
ii Inches 110 INR 0.00 No Rupees Only
i
The rate shall include cost of preparation, submission and obtaining approval of fabrication
drawings from CONSULTANT, labour, materials, consumables, surface preparation &
application of primer, tools & tackles and other associated arrangement required to execute
all the related activities. The cost shall also include cost of bolts, nuts, washers and anchor
bolts. The rate shall include cost of withdrawal and transportation from
OWNER/CONSULTANT’S stores /storage yard (if prefabricated structurals issued by
OWNER/CONSULTANT) or from his own stores/ shop to place of erection, grouting
Description
CATEGORY‐A
CATEGORY‐B
Prior approval shall have to be obtained from OWNER/CONSULTANT, in writing for
making a change in sections due to non‐availability of certain sections or using built‐
up section, compound sections, for fabrication of built‐up compound sections either
recommended by CONSULTANT or CONTRACTOR, no extra payment shall be made.
For hand railing under clause 7(c).1 pipes shall also be supplied by CONTRACTOR.
During execution of piping etc. gratings may have to be cut and the same shall be
repaired by cold galvanization (Zinc spray) of thickness 80 microns after proper
surface preparation. This activity shall be deemed covered within the unit rate of
erection of grating and nothing extra shall be paid for this.
In‐situ (Erected position) using
3" wide film
4" wide film
3" wide film
4" wide film
Length and width of film to be used which shall be decided by Owner before
execution of radiography.
RADIOGRAPHY (GAMMA RAY)
The unit rate shall include cost of radiograph viewer and films, consumables, scaffolding,
manpower, overheads/profits etc. Payment shall be made only for those films after
examination for joints found acceptable as per codes, standards & NIT. Films for defective
joints shall not be paid. Overlapping Length of radiography film is not payable.
Description
At outside, the place of erection using film size
Note:
NOTES:
FORM NO: 02‐0000‐0021F2 REV1 SHEET 11 of 30 All Rights Reserved
ii
a
b
iii
iv
11.0
i MANDAY 10 INR 0.00 No Rupees Only
ii MANDAY 10 INR 0.00 No Rupees Only
iii MANDAY 10 INR 0.00 No Rupees Only
0.00
No Rupees Only
1
1.1 Nos 2 INR 0.00 No Rupees Only
1.2 No. 1 INR 0.00 No Rupees Only
a
b
c
d
1.3 No 3 INR 0.00 No Rupees Only
1.4 No 2 INR 0.00 No Rupees Only
a
Erection of pressure transmitter , this job includes following
Calibration of transmitter
Pressure transmitter erection / installation (Including drilling of blind flange where
ever required, impulse piping including , glanding, and termination, erection of
Statction & Supports Canopy etc). Supply structural & piping material for this job Is in
Hydrotest, PMI, DP tests of impulse lines
functional check, loop checking
Supply of Radar type Level transmitter as per specification attached with this tender ( 2 main
+ 1 spare)
Erection of Radar type Level transmitter , this job includes following
Calibration of transmitter
Unskilled: Helper, Khalasi.
As a guide line the radiography film shall be used as below: ‐
Payment shall be made on the basis of weld length radiographed & for those
joints which are found acceptable.
SCHEDULE OF RATES FOR INSTRUMENT SUPPLY & INSTALLATION WORKS
Supply of pressure transmitter as per specification attached with this tender ( 1 main + 1
spare)
PART B
Transmitters Supply & Erection
TOTAL AMOUNT FOR EQUIPMENT & PIPING ERECTION WORKS (IN RS.)
Length of radiographed film shall be calculated (O.D. x 3.14) in inch.
3" wide film shall be used up to 4" dia pipes
4" wide film shall be used above 4" dia pipes
Assistance during PRE COMMISSIONING/COMMISSIONING
The rate below shall be inclusive of Contractor's supervision, hand tools, all equipments &
machinery, consumables, contractor's supervision, over‐head and profits.
Category of Personnel
Semi Skilled (with hand tools): Pipe Fitter, Gas Cutter, Rigger, Electrician (for welding m/c).
Skilled (with hand tools, equipment/machinery, consumables): Welder, Millwright Fitter
FORM NO: 02‐0000‐0021F2 REV1 SHEET 12 of 30 All Rights Reserved
b
c
d
1.5 No 2 INR 0.00 No Rupees Only
1.6 No 1 INR 0.00 No Rupees Only
a
b
c
d
1.7
No 4 INR 0.00 No Rupees Only
a
b
2.0
2.1 No 5 INR 0.00 No Rupees Only
2.2 No 4 INR 0.00 No Rupees Only
3.0
3.1 No 2 INR 0.00 No Rupees Only
3.2 No 2 INR 0.00 No Rupees Only
4.0
i Mtr 1000 INR 0.00 No Rupees Only
ii
iii Mtr 500 INR 0.00 No Rupees Only
iv Mtr 10 INR 0.00 No Rupees Only
v Mtr 1000 INR 0.00 No Rupees Only
vi
Hydrotest, PMI, DP tests of impulse lines,
functional check, loop checking
Supply of Flow transmitter as per specification attached with this tender ( 1 main + 1 spare)
Erection of Flow transmitter, this job includes following
Calibration of transmitter
Pressure transmitter erection / installation (Including drilling of blind flange where
ever required, impulse piping including , glanding, and termination, erection of
Statction & Supports Canopy etc) Supply structural & piping material for this job Is in
bidders scope , bidder to consider the cost of these items
Hydrotest, PMI, DP tests of impulse lines
functional check, loop checking
Deleted
Supply Of Junction Boxes with glands as per Specification mentioned in ITB
Erection/Installation of JB as per specification including glanding termination ,ferruling,
painting etc.
Instrumentation Cables
Supply of instrumentation cables ( as per specification provided in ITB)
12Px 1.5 Ssqmm
Deleted
01Px 1.5 Sqmm
Cable laying
12Px 1.5 Sqmm
Vibration Switch
Supply of vibration switch/Transmitter along with special cable,( if any) , transmitter (if
any)shall be done by Pump vendor
Glanding Termination ,ferruling of Vibration switches to Control system
Functional Check & Loop Testing
Pressure transmitter erection / installation (Including drilling of blind flange where
ever required, impulse piping including , glanding, and termination, erection of
Statction & Supports Canopy etc) Supply structural & piping material for this job Is in
bidders scope , bidder to consider the cost of these items
Pressure gauges
Supply Of pressure Gauges as per Specification mentioned in ITB ( 4 main + 1 spare)
Pressure gauge erection / installation (includes impulse piping and necessary support
fabrication & installation as per the hookup attached in ITB.). Supply structural & piping
material for this job Is in bidders scope , bidder to consider the cost of these items
Junction Box
FORM NO: 02‐0000‐0021F2 REV1 SHEET 13 of 30 All Rights Reserved
vii Mtr 500 INR 0.00 No Rupees Only
5..0
5.1
i Mtr 600 INR 0.00 No Rupees Only
ii Mtr 50 INR 0.00 No Rupees Only
iii Mtr 150 INR 0.00 No Rupees Only
5.2
i Mtr 600 INR 0.00 No Rupees Only
ii Mtr 50 INR 0.00 No Rupees Only
iii Mtr 150 INR 0.00 No Rupees Only
6.0
i No 3 INR 0.00 No Rupees Only
ii No 3 INR 0.00 No Rupees Only
7.0
i No 1 INR 0.00 No Rupees Only
0.00 No Rupees Only
1.
1.1
A. Nos. 4 INR 0.00 No Rupees Only
1.2
A. Nos. 4 INR 0.00 No Rupees Only
2.
2.1
A. Nos. 1 INR 0.00 No Rupees Only
B. Nos. 3 INR 0.00 No Rupees Only
PART C
SCHEDULE OF RATES FOR ELECTRICAL SUPPLY & INSTALLATION WORKS
LOCAL CONTROL STATION ( LCS )
TOTAL AMOUNT FOR INSTRUMENT SUPPLY & INSTALLATION WORKS (Rs.)
Supply of Weather Proof Local Control Station of following type, as specified in Technical
Specification PC150/E/112/P‐II/Sec 6.0.
LCS with Trip‐Neutral‐Close control switch with Ammeter & 5 nos. indication lamp.
Installation, testing and commissioning of weather proof Local control stations of following
type, including shifting of control stations from store to the site of erection, fixing control
stations with nuts & bolts, on already erected supports / nearby structure / walls etc.
connecting control cable for control switch , ammeter & Indication lamp as required and
testing to make the installation complete in all respect as per approved drawings,
specifications and direction of Owner’s Engineer‐in‐charge. Supply of all required hardware
for mounting shall be in Contractor’s scope.
LCS with Trip‐Neutral‐Close control switch with Ammeter & 5 nos. indication lamp
INTER LOCKED TYPE SW SOCKET & PLUG
Supply of Heavy duty Hoseproof & Weather proof interlocking Switch Socket having
enclosure with IP–65 degree of protection with matching Plug of following type as specified
in Technical Specification PC150/E/112/P‐II/Sec 6.0.
63A, 5‐pin, 415V (Weather Proof)
25A, 3 pin, 240V (Weather Proof)
Supply of Orifice plate with flanges ( 1 pair of gaskets as spare) as per specification attached
in ITB Erection will be a part of Piping
Aluminum Cable Trays (Perforated) size 2500 x 200 x 55
01Px 1.5 Sqmm
Cable Trays
Supply of cable trays as per specification in ITB
Aluminum Cable Trays (Perforated) size 2500 x 200 x 55
Aluminum Cable Trays (Perforated) size 2500 x 100 x 55
Aluminum Cable Trays (Perforated) Size2500 x 50 x 55
Erection Of cable trays including supports
Aluminum Cable Trays (Perforated) size 2500 x 100 x 55
Aluminum Cable Trays (Perforated) Size2500 x 50 x 55
Cable Glands ( Panel Side )
Supply Of Cable Glands (1” NPT)
Glanding in panel Side (1” NPT)
Orifice plate with flanges
FORM NO: 02‐0000‐0021F2 REV1 SHEET 14 of 30 All Rights Reserved
2.2
A. Nos. 1 INR 0.00 No Rupees Only
B. Nos. 3 INR 0.00 No Rupees Only
3.
3.1
A. No. 4 INR 0.00 No Rupees Only
4.
4.1
A. Mtrs. 20 INR 0.00 No Rupees Only
4.2
B. Mtrs. 20 INR 0.00 No Rupees Only
5.
5.1
A. Mtrs. 1200 INR 0.00 No Rupees Only
B. Mtrs. 100 INR 0.00 No Rupees Only
5.2
D. Mtrs 300 INR 0.00 No Rupees Only
E. Mtrs 900 INR 0.00 No Rupees Only
F. Mtrs 1300 INR 0.00 No Rupees Only
G. Mtrs 100 INR 0.00 No Rupees Only
H. Mtrs 1200 INR 0.00 No Rupees Only
I. Mtrs. 20 INR 0.00 No Rupees Only
Testing and commissioning of 3‐Phase, Squirrel Cage, Weatherproof Induction Motors of
following ratings excluding cable glanding, cable termination, dehydration of windings but
including checking & replenishment/ replacement of bearing grease/ lubricant; checking of IR
values between each winding & motor frame & checking of continuity of rotation, if required,
by changing supply connections; trial runs on NO LOAD & ON LOAD; supply of approved
grease/ lubricant & necessary hardware; all work, labour & materials complete as per
specifications, documents, codes & standards & directions of Owner’s Engineer‐in‐charge.
(Contractor to keep proper record of tests on motors for NO LOAD & ON LOAD runs).
3.3 kV Motors of Rating upto 500 kW
Installation, testing and commissioning of interlocked type switch sockets with matching
plugs complete with cable glands, lugs, terminal blocks etc. of following ratings:
63A, 5‐pin, 415V (Weather Proof)
25A, 3 pin, 240V (Weather Proof)
Motors
G.I. Pipes
Supply of G. I. pipes; Medium Class as per IS 1239 (part‐1) of following sizes :
100 mm NB
Installation of G.I. pipes of following sizes for cable protection, floor sleeves etc. fixed on a
steel structure, concrete, laid in trenches including concrete cutting, bending, threading etc.
to a clamp, nuts, bolts sockets, reducers, spacers, plug, bushing, chipping of concrete floor,
breaking of concrete cable trench, walls and complete with all labour and material as per
directions of engineer‐in‐charge.
100 mm NB
Cables
Supply of 3.3 KV (UE) Grade, XLPE Insulated, PVC inner sheathed, Armoured, FRLS PVC outer
sheathed cables as specified in Technical Specification Doc. No. PC150/E/112/P‐II/Sec‐6.0 &
its attachments of following sizes
3C x 240 sq. mm (Al)
3C x 185 sq. mm (Al)
Supply of 1.1 KV Grade, XLPE Insulated, PVC inner Sheath, Armoured, FRLS PVC outer
sheathed cables LT Power & Control Cable / Earthing cable as specified in Technical
Specification PC150/E/112/P‐II/Sec‐6.0 & its attachments, of following sizes
3.5 C x 70 sqmm (Al)
3.5 C x 50 sqmm (Al)
3 C x 2.5 sqmm (Cu)
12 C x 2.5 sqmm (Cu)
16 C x 2.5 sqmm (Cu)
1C x 10 Sqmm (Al) Earthing Cable
FORM NO: 02‐0000‐0021F2 REV1 SHEET 15 of 30 All Rights Reserved
A.
i. Mtrs. 1200 INR 0.00 No Rupees Only
ii. Mtrs. 100 INR 0.00 No Rupees Only
B.
i. Mtrs 300 INR 0.00 No Rupees Only
ii. Mtrs 900 INR 0.00 No Rupees Only
iii. Mtrs 1300 INR 0.00 No Rupees Only
iv. Mtrs 100 INR 0.00 No Rupees Only
v. Mtrs 1200 INR 0.00 No Rupees Only
vi. Mtrs. 20 INR 0.00 No Rupees Only
5.4
A.
i.
Nos. 8 INR 0.00 No Rupees Only
ii.
Nos. 2 INR 0.00 No Rupees Only
B.
i. Nos. 2 INR 0.00 No Rupees Only
ii. Nos. 6 INR 0.00 No Rupees Only
iii. Nos. 12 INR 0.00 No Rupees Only
iv. Nos. 2 INR 0.00 No Rupees Only
v. Nos. 8 INR 0.00 No Rupees Only
vi. Nos. 2 INR 0.00 No Rupees Only
5.3
Horizontal and vertical laying, testing (before and after laying) and commissioning of above
HV/LV Power & Control cables in readymade trenches, on pre‐fabricated cable trays / racks,
on already installed risers, support hangers, saddles etc. pulling through pipes on walls /
columns, steel structures including transportation, including supply and fixing of necessary
saddles, saddle bars, cable tags, Al clamps for cables laid vertical on walls / columns /
structures, risers with all labour, consumable materials and necessary hardware to make
installation complete in all respect as per approved standard drawings and direction of
Owner’s Engineer‐in‐charge.
This also includes drilling, taping of cable insulation, crimping of lugs to the conductor,
connection of the lugs to equipment terminal, supply and fixing of G.I. nuts, screws, bolts,
washers and other necessary hardware, PVC tape of required grade for taping, making cable
entries dust and vermin proof, earthing etc. as per instruction of manufacturer, approved
drawings, specifications and directions of Owner’s Engineer‐in‐charge.
3.3 KV (UE) Grade XLPE Insulated, PVC inner sheathed, Armoured, FRLS PVC outer sheathed
cables
3C x 240 sq. mm (Al)
3C x 185 sq. mm (Al)
1.1 KV Grade XLPE Insulated, PVC inner Sheath, Armoured, FRLS PVC outer sheathed cables
3.5 C x 70 sqmm (Al)
3.5 C x 50 sqmm (Al)
3 C x 2.5 sqmm (Cu)
12 C x 2.5 sqmm (Cu)
16 C x 2.5 sqmm (Cu)
1C x 10 Sqmm (Al) Earthing Cable
Supply of heavy duty Industrial double compression ET Thread rolled Aluminum cable glands
suitable for 3.3 kV grade / 1.1 KV Grade, XLPE Insulated, PVC inner Sheath, armoured, FRLS
PVC outer sheathed cables of the following sizes of cables as specified in Technical
Specification Doc. No. PC150/E/112/P‐II/Sec‐6.0 & its attachments of following sizes.
3.3 KV (UE) Grade XLPE Insulated, PVC inner sheathed, Armoured, FRLS PVC outer sheathed
cables
3C x 240 sq. mm (Al)
3C x 185 sq. mm (Al)
1.1 KV Grade XLPE Insulated, PVC inner Sheath, Armoured, FRLS PVC outer sheathed cables
3.5 C x 70 sqmm (Al)
3.5 C x 50 sqmm (Al)
3 C x 2.5 sqmm (Cu)
12 C x 2.5 sqmm (Cu)
16 C x 2.5 sqmm (Cu)
1C x 10 Sqmm (Al) Earthing Cable
FORM NO: 02‐0000‐0021F2 REV1 SHEET 16 of 30 All Rights Reserved
5.5
A.
i.
Nos. 24 INR 0.00 No Rupees Only
ii. Nos. 6 INR 0.00 No Rupees Only
B.
i. Nos. 6 INR 0.00 No Rupees Only
ii. Nos. 18 INR 0.00 No Rupees Only
iii. Nos. 2 INR 0.00 No Rupees Only
iv. Nos. 9 INR 0.00 No Rupees Only
v. Nos. 200 INR 0.00 No Rupees Only
vi. Nos. 4 INR 0.00 No Rupees Only
5.6
A.
i.
Nos. 8 INR 0.00 No Rupees Only
ii. Nos. 2 INR 0.00 No Rupees Only
B.
i. Nos. 2 INR 0.00 No Rupees Only
ii. Nos. 6 INR 0.00 No Rupees Only
iii. Nos. 12 INR 0.00 No Rupees Only
iv. Nos. 2 INR 0.00 No Rupees Only
v. Nos. 8 INR 0.00 No Rupees Only
vi. Nos. 2 INR 0.00 No Rupees Only
5.7
A.
i.
Nos. 8 INR 0.00 No Rupees Only
ii. Nos. 2 INR 0.00 No Rupees Only
6.
Supply of Tinned Copper / Aluminum crimping type lugs of following sizes for termination of
3.3 kV / 1.1 kV grade cables.
3.3 kV grade cables
240 sq. mm (Al)
185 sq. mm (Al)
1.1 kV grade cables
70 sqmm (Al)
50 sqmm (Al)
35 sqmm (Al)
25 sqmm (Al)
2.5 sqmm (Cu)
10 sqmm (Al)
End termination and subsequent testing of XLPE/PVC insulated single core / multi core
armoured Cables of 3.3 kV/ 1.1 KV grade, Al / Cu cable using suitable excluding supply of
glands & lugs but including Glanding, all labour and consumable materials to make
installation complete in all respect. The rate shall include drilling, taping of cable insulation,
crimping of lugs to the conductor, connection of the lugs to equipment terminal, supply and
fixing of G.I. nuts, screws, bolts, washers and other necessary hardware, PVC tape of required
grade for taping, making cable entries dust and vermin proof, earthing etc. as per instruction
of manufacturer, approved drawings, specifications and directions of engineer‐in‐charge.
3.3 KV (UE) Grade XLPE Insulated, PVC inner sheathed, Armoured, FRLS PVC outer sheathed
3C x 240 sq. mm (Al)
3C x 185 sq. mm (Al)
1.1 KV Grade XLPE Insulated, PVC inner Sheath, Armoured, FRLS PVC outer sheathed cables
3.5 C x 70 sqmm (Al)
3.5 C x 50 sqmm (Al)
3 C x 2.5 sqmm (Cu)
12 C x 2.5 sqmm (Cu)
19 C x 2.5 sqmm (Cu)
1C x 10 Sqmm (Al) Earthing Cable
Supply of following types of cable termination kit :
Indoor type Heat shrinkable end termination kit of Raychem make suitable for 3.3 KV grade
XLPE‐A‐FRLSPVC insulated armoured cables of following sizes
3.3 kV (UE), 3 X 240 sq. mm (Al) XLPE armoured cables
3.3 kV (UE), 3 X 185 sq. mm (Al) XLPE armoured cables
CABLE RACK (PREFABRICATED LADDER TYPE GI CABLE TRAYS) & ACCESSORIES
FORM NO: 02‐0000‐0021F2 REV1 SHEET 17 of 30 All Rights Reserved
6.1
A.
i. Mtrs. 400 INR 0.00 No Rupees Only
ii. Mtrs. 800 INR 0.00 No Rupees Only
iii. Mtrs. 50 INR 0.00 No Rupees Only
B.
i. Nos. 10 INR 0.00 No Rupees Only
ii. Nos. 10 INR 0.00 No Rupees Only
iii. Nos. 2 INR 0.00 No Rupees Only
C.
i. Nos. 3 INR 0.00 No Rupees Only
ii. Nos. 3 INR 0.00 No Rupees Only
iii. Nos. 1 INR 0.00 No Rupees Only
D.
i. Nos. 3 INR 0.00 No Rupees Only
ii. Nos. 3 INR 0.00 No Rupees Only
iii. Nos. 1 INR 0.00 No Rupees Only
E.
i. No. 2 INR 0.00 No Rupees Only
ii. No. 2 INR 0.00 No Rupees Only
iii. Nos. 2 INR 0.00 No Rupees Only
F.
i. Nos. 2 INR 0.00 No Rupees Only
ii. No. 1 INR 0.00 No Rupees Only
6.2
A.
i. Mtrs. 400 INR 0.00 No Rupees Only
ii. Mtrs. 800 INR 0.00 No Rupees Only
iii. Mtrs. 50 INR 0.00 No Rupees Only
B.
i. Nos. 10 INR 0.00 No Rupees Only
ii. Nos. 10 INR 0.00 No Rupees Only
iii. Nos. 2 INR 0.00 No Rupees Only
C.
i. Nos. 3 INR 0.00 No Rupees Only
ii. Nos. 3 INR 0.00 No Rupees Only
iii. No. 1 INR 0.00 No Rupees Only
D.
i. Nos. 3 INR 0.00 No Rupees Only
Supply of GI ladder type Cable trays and their accessories i.e. supply of all hardware required
i.e. J‐hooks, GI Nut, Bolt, Washers, coupling plate etc. of following sizes and as per Technical
Specification Doc. No. PC150/E/112/P‐II/Sec‐6.0 & its attachments and drawing enclosed.
Straight Run Cable Trays
600mm wide
300mm wide
150mm wide
Horizontal Bends
600mm wide
300 mm wide
150mm wide
Vertical Inside Bends
600mm wide
300mm wide
150mm wide
Vertical Outside Bends
600mm wide
300mm wide
150mm wide
Regular Tees
600mm wide
300mm wide
150mm wide
Reducers
600/300mm wide
300/150mm wide
Installation, laying and connecting of GI ladder type Cable trays and horizontal & vertical
bends and regular Tees of different radii of various sizes on already erected supports or
risers, including joining various cable trays by bolting with G.I. bolts, nuts & washers as per
approved drawings (including fixing J‐hooks, reducer coupler plate, adjustable coupler plate
through supply of GI Nut Bolts, Washers etc) as per the desired cable route and as per the
drawings and directions of Engineer‐in‐charge.
Straight Run Cable Trays
600mm wide
300mm wide
150mm wide
Horizontal Bends
600mm wide
300 mm wide
150mm wide
Vertical Inside Bends
600mm wide
300mm wide
150mm wide
Vertical Outside Bends
600mm wide
FORM NO: 02‐0000‐0021F2 REV1 SHEET 18 of 30 All Rights Reserved
ii. Nos. 3 INR 0.00 No Rupees Only
iii. Nos. 1 INR 0.00 No Rupees Only
E.
i. No. 2 INR 0.00 No Rupees Only
ii. Nos. 2 INR 0.00 No Rupees Only
iii. Nos. 2 INR 0.00 No Rupees Only
G.
i. Nos. 2 INR 0.00 No Rupees Only
ii. No. 1 INR 0.00 No Rupees Only
7.
7.1 Nos. 2 INR 0.00 No Rupees Only
7.2 Nos. 2 INR 0.00 No Rupees Only
8.
8.1
A.
i. Nos. 5 INR 0.00 No Rupees Only
B.
i. Nos. 20 INR 0.00 No Rupees Only
Reducers
600/300mm wide
300/150mm wide
DISTRIBUTION BOARDS
Supply of 415 V Lighting sub Distribution Board 9‐way wall mounted Sheet enclosed Hose &
Weather Proof Lighting Sub Distribution Board in IP55 degree of protection having 1 No.
Incoming (63 A TP & Switched Neutral Isolator switch) and 3nos feeder circuit of 63A DP MCB
and ELCB (300/10mA) having 9 Nos. outgoing of 16/25 A DP MCB (i.e. 3 nos. 16 A DP MCB
per circuit), as specified in Technical Specification PC150/E/112/P‐II/Sec‐6.0 & its
attachments.
Installation, testing and commissioning of 415 V, 9 way wall mounted Lighting sub
Distribution Boards including supply and fabrication of epoxy painted MS frame, operational
and functional checking, drilling of gland plates with requisite holes, fixing of cable glands,
plugging of all unused cable entries and other holes found in the boards to make the same
dust and vermin proof with all labour and consumable materials to make installation
complete as per approved drawings, specifications and directions of engineer‐in‐charge.
LIGHTING fixtures & accessories
Supply of Lighting Fixtures & Accessories
300mm wide
150mm wide
Regular Tees
600mm wide
300mm wide
150mm wide
240V AC,1‐Ph, hose and weather proof Lighting fixtures, electronic drivers, cable glands and
other accessories, internal & external reflectors, louvers, etc. suitable for use in safe area
having IP‐65 degree of protection complete with all accessories and all hardware for fixing
the lighting fittings with ceiling / wall / pole/ frame of following types as specified in
Technical Specification Doc. No. PC150/E/112/P‐II/Sec‐6.0 & its attachments.
120 W Outdoor LED Flood lighting fixtures
240V 1‐ph suspension/ wall mounted T5 type LED Lighting Fixture with/ without reflector
having IP20 Protection
2 x 20 W LED Philips make suspension mounted Lighting Fixture with vitreous enameled
reflector type fixture and lamps.
FORM NO: 02‐0000‐0021F2 REV1 SHEET 19 of 30 All Rights Reserved
8.2
i. Nos. 3 INR 0.00 No Rupees Only
ii. Nos. 20 INR 0.00 No Rupees Only
9.
9.1 Nos. 10 INR 0.00 No Rupees Only
9.2 Nos. 10 INR 0.00 No Rupees Only
10.
10.1
A.
Installation, connection, testing and commissioning of pre‐wired fluorescent/ LED Lighting
fixtures along with integral /non‐integral control gears, lamps, tubes, chokes, starters,
condensers, mounting accessories, including cable glanding, crimping of lugs on cable
conductor & connecting cables at fixtures, earthing, junction boxes, etc. including supply of
all connecting materials like clamps, supports, conduits, down rods etc. as required as well as
transportation from store to site of erection with all labour and material to make installation
complete in all respect as per approved drawings, specifications and directions of engineer‐in‐
charge. The rates shall be valid for all mounting heights.
250 W HPSV Hose proof & weather proof Streetlight fixtures with separate control gear
complete with weatherproof cable glands, plug suitable for 3 X 2.5 mm2 XLPE‐A‐PVC cable
and stopping plug.
2x20 W LED recess/suspended mounting FTL type Lighting Fixture including supply and
installation of mounting accessories.
JUNCTION BOXES
Supply of 25A, 230V, 1Ph & N 4 Way type hose proof & weatherproof Junction Boxes in cast
aluminium (LM6) enclosure with IP–65 degree of protection and suitable for 3Cx2.5
sq.mm(Cu) cable with cable glands, terminal blocks and threaded plug of suitable size for
easy termination of cables and as specified in Technical Specification ‐ Electrical System (Doc.
No. PC150/E/112/P‐II/Sec‐6.0 & its attachments).
Installation, connection, testing and commissioning of 25A, 230V, 1Ph & N 4 Way type hose
proof & weatherproof Junction Boxes, including cable glanding, crimping of lugs on cable
conductor & connecting cables, earthing etc. including supply of all connecting materials like
clamps, supports etc. as required as well as transportation from store to site of erection with
all labour and material to make installation complete in all respect as per approved drawings,
specifications and directions of engineer‐in‐charge. The rates shall be valid for all mounting
heights.
Wiring
Point Wiring
Primary Point
FORM NO: 02‐0000‐0021F2 REV1 SHEET 20 of 30 All Rights Reserved
i. Nos. 12 INR 0.00 No Rupees Only
B.
i. Nos. 20 INR 0.00 No Rupees Only
11.
11.1 Nos. 6 INR 0.00 No Rupees Only
11.2 Nos. 6 INR 0.00 No Rupees Only
Supply, installation, testing & commissioning of Point Wiring system for primary light
point/ceiling fan point/exhaust fan point/ light plug point inclusive of the cost for providing
circuit wiring from LSDB to switch boards with 2x2.5 sq.mm.,1.1 KV grade PVC multi stranded
fire resistant insulated copper conductor wire for light in required size of heavy duty GI
Conduit with accessories and 14swg bare copper earth wire continuity conductor including
providing/fixing of PVC conduit of required size. Item shall also include wiring from LSDB to
point/fitting with 2x1.5 sq.mm copper conductor PVC insulated wire of 1100V grade with 14
SWG copper wire as earth continuity conductor for light in appropriate size of GI conduit
including providing & fixing GI conduit with accessories such as bends, JB, sockets etc.
required size of MS zinc passivated modular box with white inner plate and glossy white
outer module plate for housing modular switch, sockets, fan regulators (Electronic heavy
duty step up type) on modular plate etc,The rates shall include cutting and refilling of chases/
Wall etc. including internal connections as required. All switch sockets shall be modular type
fixed on modular plate. Make of modular plate, board, switch, socket etc shall be as per
approved Make
Secondary Point
Supply, installation, testing & commissioning of Point Wiring system for light point/ceiling fan
point/exhaust fan point/ light plug point from switch boards with 2x2.5 sq.mm., multi
stranded PVC insulated unsheathed copper conductor fire retardant wires of 1100V grade in
recessed GI conduit including providing and fixing heavy duty GI Conduit of required size
complete with accessories such as bends, JB, Pull Boxes etc with plate, switches, sockets,
screws and covers, Zinc Passivated MS modular boxes (16 gauge sheet construction) of
suitable sizes, embedded in wall, concealed and flush with walls including cutting and refilling
the chases/ Wall etc and inclusive of 14 SWG bare copper earth conductor for socket outlets
as per specifications & direction of Engineer in charge. All Modular type switch & socket shall
be of approved make with 6A switch mounted side by side with 2x2.5 sq.mm PVC copper
wire with 14 SWG bare copper earth wire.(Actual nos. shall be decided at site).
EARTHING MATERIAL
Supply of 3.8M, 100mm dia. heavy G.I. Pipe earth electrode having 100 micron zinc coating
for earthing as per Technical Specification ‐ Electrical System (Doc. No. PC150/E/112/P‐II/Sec‐
6.0 & its attachments). The hot dip galvanizing (minimum Zinc coating of 610 gms/ sq. M as
per IS‐2629) shall be done after all fabrication. The electrodes shall be made from one piece
length of pipe
Installation, testing and commissioning of earth pits as per earthing layout drawings
(excluding supply of safe earth electrodes & accessories) including digging the earth upto
required depth, erecting safe earth electrode, disposal of surplus earth (as directed by
engineer‐in‐charge) and back filling of the pit as required including supply of erection
material providing necessary brick works and other civil works, fixing G.I. L‐shaped test links
and brackets, twisted piece and connecting to it earth electrodes and earth strips with all
labour and materials to complete installation work in all respect as per approved drawings,
specifications and directions of engineer‐in‐charge
FORM NO: 02‐0000‐0021F2 REV1 SHEET 21 of 30 All Rights Reserved
11.3 Nos. 3 INR 0.00 No Rupees Only
11.4 Nos. 3 INR 0.00 No Rupees Only
11.5
A. Mtrs. 200 INR 0.00 No Rupees Only
B. Mtrs. 120 INR 0.00 No Rupees Only
11.6
A. Mtrs. 200 INR 0.00 No Rupees Only
B. Mtrs. 120 INR 0.00 No Rupees Only
11.7 Nos. 6 INR 0.00 No Rupees Only
12.
12.1 Te 4 INR 0.00 No Rupees Only
12.2 Te 4 INR 0.00 No Rupees Only
12.3 Te 0.1 INR 0.00 No Rupees Only
12.4 Te 0.1 INR 0.00 No Rupees Only
13.
13.1 M3 2 INR 0.00 No Rupees Only
13.2 Nos. 1200 INR 0.00 No Rupees Only
13.3 M3 30 INR 0.00 No Rupees Only
Supply of G.I. Earth Bus (50mm x 12mm x 390mm), with 10 Nos earthing holes and as per
PDS: E 615 enclosed.
Installation and commissioning of hot dip galvanised earth bus bar of size 360 mm x 75 mm x
10 mm with 10 holes of 14 mm dia including all labour and materials to complete installation
in all respect as per approved drawings, specifications and directions of Owner’s Engineer‐in‐
charge.
Supply of hot dip galvanized (minimum Zinc coating of 610 gms / sq. M as per IS‐2629)
Earthing strip / earth wire of the following sizes :
75mm X10mm
50mm X 6mm
Installation, testing and commissioning of Hot dip galvanised G.I. earthing strip running on
O.H. cable trays / cable trays in underground cable trenches / buried under soil in already
excavated cable trenches of depth 600mm or supported by G.I. saddles & saddle bars as
mentioned below including interconnection between different earth pits, strip / cable for
connection to various equipments & system neutral, necessary hardware for connection and
interconnection between earth bus bars including all labour and miscellaneous materials to
make installations complete in all respect as per approved drawings, specifications,
instructions and directions of engineer‐in‐charge.
75mm X10mm
50mm X 6mm
Supply of GI Links for Earth Pit Connections
MS Structure
Supply of MS structurals in channels, angles, flats, plates, rods etc. conforming to IS: 226.
Fabrication and installation of MS frame supports and brackets for various equipment base
frame, miscellaneous electrical equipment support, made of channels, angles, flats etc. of
different sections including bolting, welding, riveting, supply of necessary anchor bolts and
grouting etc. including 2 coats of zinc rich anti‐rust epoxy primer and 2 finished coats of
epoxy paint including breaking wall, floor etc. and making good the same with all labour and
consumable materials to complete installation in all respect as per approved drawings ,
specifications and directions of Owner’s Engineer‐in‐charge
Supply of 8 mm thick MS Chequered plates.
Fabrication and Installation of 8mm thick chequered plate in flooring, steps, covers over
cable trenches in switch board room, painting with one coats of bitumen paint in the 50%
thinner with two coats of black bitumen paints including supply of all consumables and
paints.
MATERIAL & ACCESSORIES FOR DIRECTLY BURIED CABLES
Supply of Fine river sand, as required.
Supply of approved first class bricks of dimension 230mmx115mmx75mm
Excavation of soft soil and back filling of trenches for cables and earth strips etc. following
types of soil except rocks for a maximum depth of 1.25 m for cables / 0.6 mtr. for earth strips
including shoring, strutting, dewatering, consolidation and disposal of surplus earth upto100
m leads including all labour and materials to complete installation in all respect.
FORM NO: 02‐0000‐0021F2 REV1 SHEET 22 of 30 All Rights Reserved
13.4 M3 30 INR 0.00 No Rupees Only
13.5 M3 2 INR 0.00 No Rupees Only
13.6 Nos. 1200 INR 0.00 No Rupees Only
14.
14.1 Nos. 2 INR 0.00 No Rupees Only
14.2 Nos. 2 INR 0.00 No Rupees Only
14.3 Nos. 2 INR 0.00 No Rupees Only
14.4 Nos. 2 INR 0.00 No Rupees Only
15.
15.1
A. Set 1 INR 0.00 No Rupees Only
B. No. 1 INR 0.00 No Rupees Only
C. Nos. 2 INR 0.00 No Rupees Only
D. No. 1 INR 0.00 No Rupees Only
E. Nos. 2 INR 0.00 No Rupees Only
15.2
A. No. 1 INR 0.00 No Rupees Only
B. Nos. 3 INR 0.00 No Rupees Only
C. Nos. 3 INR 0.00 No Rupees Only
D. No. 1 INR 0.00 No Rupees Only
15.3
A. Nos. 2 INR 0.00 No Rupees Only
B. Nos. 2 INR 0.00 No Rupees Only
C. Nos. 2 INR 0.00 No Rupees Only
D. Set 2 INR 0.00 No Rupees Only
15.4
A. Nos. 2 INR 0.00 No Rupees Only
B. Nos. 2 INR 0.00 No Rupees Only
Back filling with excavated earth in trench including consolidating each deposited layer by
ramming, dressing etc.
Spreading of approved fine river sand in cable trenches up to a depth of 250 mm (100 mm
below the centre line of cable and 150 mm above cable the centre line of cable) including all
labour and materials to make the installation complete in all respect as per approved
drawings, specifications and directions of engineer‐in‐charge.
Spreading of approved first class bricks of dimension 230mmx115mmx75mm in cable
trenches for cable protection including all labour and materials to make installation complete
in all respect.
MISCELLANEOUS ITEMS
Supply of Cable route markers of Round shape made of MS of dia 200mm with suitable
engraving as of HT/ LT/ Control/ Data Cable jointed with angle of 30X30X5 mm grouted in
concrete of size 150mm x150mm x 500mm.
Grouting and Installation of Cable Route Marker
Supply, hanging, fixing, connecting of of 240V, 1‐Ph, 50Hz, 1400mm sweep high speed ceiling
fan with electronic regulator.
Supply, hanging, fixing, connecting of single phase 450 mm sweep heavy duty Industrial type
exhaust fan with self opening guards/ louvers. along with necessary brackets, all required
civil works, making good the walls after fixing the fans etc.
Item wise unit prices of following spares for two years operation and maintenance along
with recommended quantity shall be quoted :
Motor (For each rating)
Bearings housing (complete with End Shield) both Driving End and Non driving end
Cooling fan
Space heater
Terminal box
Grease nipple & Plug (if installed)Interlocking switch socket & plug
Switch of each rating
Fuse base of each rating
Fuse of each rating
Plug Top
Lighting Fixtures
LED Lighting fixtures (along with Driver) alongwith LED Lamp of each type
Terminal block of each type
Heat resistance toughened glass cover of each type
Allen keys of different sizes as applicable
Local Control Station
Trip – neutral – close switch
Auto Manual / Local ‐Remote switch
FORM NO: 02‐0000‐0021F2 REV1 SHEET 23 of 30 All Rights Reserved
C. No. 1 INR 0.00 No Rupees Only
D. Nos. 10 INR 0.00 No Rupees Only
E. Sets 2 INR 0.00 No Rupees Only
F. Sets 2 INR 0.00 No Rupees Only
G. No. 1 INR 0.00 No Rupees Only
15.5
A. Nos. 2 INR 0.00 No Rupees Only
15.6
A. No. 1 INR 0.00 No Rupees Only
B. Nos. 2 INR 0.00 No Rupees Only
C. Nos. 2 INR 0.00 No Rupees Only
D. Nos. 2 INR 0.00 No Rupees Only
0.00 No Rupees Only
1 Cu. M 126700 INR 0.00 No Rupees Only
1.1 Cu. M 115600 INR 0.00 No Rupees Only
1.2 Cu. M 81700 INR 0.00 No Rupees Only
2
2.1 Cu. M 2000 INR 0.00 No Rupees Only
2.2 Cu. M 2000 INR 0.00 No Rupees Only
3 Cu. M 17000 INR 0.00 No Rupees Only
4 Cu. M 3400 INR 0.00 No Rupees Only
Ammeters of different ranges
Terminal block
Indicating Lamps of different type
Push Buttons of different typeComplete LCS of each type
Junction Box
Junction Box of each type
LSDB63 A TPN SFU
32 A DP MCB
32 A DP ELCB
16 A DP MCB
TOTAL AMOUNT FOR SCHEDULE OF RATES FOR ELECTRICAL SUPPLY & INSTALLATION
WORKS
PART D
SCHEDULE OF RATES FOR CIVIL WORKS
Earthwork in excavation in foundations of footings, columns, plinth beams, walls etc., to
the required levels and grades in both dry and wet conditions, including dressing of sides
and ramming of bottoms, getting out excavated earth with lift upto 1.5 M and disposal of
surplus excavated materials within a lead of 50 M including stacking, levelling and dressing
etc., complete as per direction of Engineer‐in‐Charge(E.I.C.) in all kinds of soils as defined in
IS: 1200 including providing temporary supports to all service lines such as overhead and
underground water, sewage and drain pipes, cables etc. and shoring and strutting
wherever necessary, complete in all respects as per direction of Engineer‐in‐Charge.
Same as Item No.1, but lift from 1.5 M to 3.0 M.
Same as Item No.1, but lift from 3 M to 4.5 M.
Earth work in excavation by mechanical means (hydraulic excavator) / manual means over
areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal
of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed to be levelled and neatly
dressed.
Ordinary Rock
Hard rock (blasting probihited)
Filling with available excavated good earth (excluding rocks / boulders), as approved and
directed by Engineer‐in‐Charge, in trenches, plinth, under floors, sides of foundation etc., at
all depths in layers not exceeding 20 cms. in thickness including consolidating and dressing
each deposited layer by ramming and watering with lead upto 50 metres, complete in all
respects
Same as above with selected good earth brought from source approved by the Engineer ‐in‐
Charge ( Rate shall include Royalty, Taxes, Octoroi, etc., levied by the local authorities,
all transportation, loading and unloading, etc., and nothing extra will be paid on this
account).
FORM NO: 02‐0000‐0021F2 REV1 SHEET 24 of 30 All Rights Reserved
5 Cu. M 100 INR 0.00 No Rupees Only
6 Cu. M 8000 INR 0.00 No Rupees Only
7 Cu. M 780 INR 0.00 No Rupees Only
8
8.1 Cu. M 13000 INR 0.00 No Rupees Only
8.2 Cu. M 50 INR 0.00 No Rupees Only
8.3 Cu. M 50 INR 0.00 No Rupees Only
8.4 Cu. M 50 INR 0.00 No Rupees Only
8.5 Cu. M 1900 INR 0.00 No Rupees Only
8.6 Cu. M 1300 INR 0.00 No Rupees Only
9 Ton 500 INR 0.00 No Rupees Only
10 Cu. M 110 INR 0.00 No Rupees Only
11 Sq.M 2550 INR 0.00 No Rupees Only
12 Sq.M 860 INR 0.00 No Rupees Only
13 Sq.M 600 INR 0.00 No Rupees Only
14 Sq.M 3370 INR 0.00 No Rupees Only
15 Sq.M 845 INR 0.00 No Rupees Only
16 Sq.M 280 INR 0.00 No Rupees Only
Providing and laying dry rubble stone soling in layers of 300 mm thick hand set in regular
lines, interstices being filled in wit small pieces of stones, thoroughly rammed, consolidated
and watered complete as directed and specified & rolling with 10 MT power roller.
Supplying and filling in plinth with sand under floors, including watering, ramming,
consolidating and dressing complete.
Providing and laying in position cement concrete of specified grade ‐ all work up to plinth
level, including the cost of centering, shuttering and finishing :‐ 1:2:4 (1 Cement : 2 coarse
sand (zone‐III) : 4 graded stone aggregate 40 mm nominal size).
Providing and laying in position reinforced cement concrete in foundations, plinth beams
etc. including the cost of centering, shuttering, finishing but excluding reinforcement
Design mix M20 grade concrete ‐ All work up to plinth level
Design mix M20 grade concrete ‐ All work above plinth level
Design mix M25 grade concrete ‐ All work up to plinth level
Design mix M25 grade concrete ‐ All work above plinth level
Design mix M30 grade concrete ‐ All work up to plinth level
Design mix M30 grade concrete ‐ All work above plinth level
Steel reinforrcement for R.C.C. work including straightening, cutting, bending, placing in
posision and binding all complete with hot rolled, cold twisted, weldable high yield deformed
CRSD (Corrosion Resistance Steel with Fe500D properties) rebar having Characteristic yield
strength 500N/mm²,in accordance with IS:1786.
Providing and constructing Brick work with non modular fly ash bricks conforming to
IS:12894, class designation 10 average compressive strength in in cement mortar 1 : 6 ( 1
cement: 6 coarse sand )inwalls, etc. at all depths, places and positions including raking out
joints, curing, scaffolding etc. complete excluding plastering and painting.
CEMENT PLASTER (IN COARSE SAND): 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse
sand)
CEMENT PLASTER (IN COARSE SAND): 15 mm cement plaster on rough side of single or half
brick wall of mix 1:6 (1 cement: 6 coarse sand)
6mm thick cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand).
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to
prepare the surface even and smooth complete
Distempering with oil bound washable distemper of approved brand and to give an even
shade including water thinnable priming coat with cement primer.
Providing and laying in position at all heights cement concrete mix 1:2:4 (1 cement: 2
coarse sand : 4 graded stone aggregate) in panels of 2 metre square or as directed
and finished with floating coat of neat cement including providing cement slurry ( with
cement @ 2.2 kg/sq.m.), rounding of edges and glass strips but excluding the cost of nosing
of steps etc., complete :‐ 40 mm. thick with 20.0 mm nominal size stone aggregate
FORM NO: 02‐0000‐0021F2 REV1 SHEET 25 of 30 All Rights Reserved
17 Sq.M 100 INR 0.00 No Rupees Only
18
18.1 kg. 250 INR 0.00 No Rupees Only
18.2 kg. 120 INR 0.00 No Rupees Only
19 Sq.M. 25 INR 0.00 No Rupees Only
20 Sq.M. 50 INR 0.00 No Rupees Only
21 Each 10 INR 0.00 No Rupees Only
22
22.1 Each 10 INR 0.00 No Rupees Only
22.2 Each 10 INR 0.00 No Rupees Only
Making Plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6
graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm
nominal size, well rammed and consolidated and grouted with fine sand, including necessary
excavation, levelling & dressing & finishing the top smooth.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with
extruded built up standard tubular sections/appropriate Z sections and other sections of
approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia
and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with
required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium
snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per
architectural drawings and the directions of Engineer‐in‐charge. Powder coated aluminium
(minimum thickness of powder coating 50 micron)
For Fixed Portion ‐ Anodised aluminium (anodised transparent or dyed to required shade
according to IS: 1868, Minimum anodic coating of grade AC 15)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and
making provision for fixing of fittings wherever required including the cost of EPDM rubber /
neoprene gasket required including necessary fittings:‐ Anodised aluminium (anodised
transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of
grade AC 15).
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or
graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in
aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel
screws etc. complete as per architectural drawings and directions of engineerin‐charge‐Pre‐
laminated particle board with decorative lamination on one side and balancing lamination on
other side
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions
etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and
the directions of Engineer‐in‐charge. (Including aluminium snap beading)‐With float glass
panes of 4.0 mm thickness
Providing and fixing double action hydraulic floor spring of approved brand and manufacture
conforming to IS : 6315, having brand logo embossed on the body / plate with double spring
mechanism and door weight upto 125 kg, for doors, including cost of cutting floors,
embedding in floors as required and making good the same matching to the existing floor
finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide
plate etc. complete as per the direction of Engineer‐in‐charge‐With brass cover plate
minimum 1.25 mm thickness
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less
than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with
necessary screws etc. complete
150x10 mm
100x10 mm
FORM NO: 02‐0000‐0021F2 REV1 SHEET 26 of 30 All Rights Reserved
23 Each 10 INR 0.00 No Rupees Only
24 Each 15 INR 0.00 No Rupees Only
25 Each 15 INR 0.00 No Rupees Only
26
26.1 R.M. 100 INR 0.00 No Rupees Only
26.2 R.M. 100 INR 0.00 No Rupees Only
27 Sq.M 155 INR 0.00 No Rupees Only
28 m 1220 INR 0.00 No Rupees Only
29per 50 Kg
cement24880 INR 0.00 No Rupees Only
30 Sq.M. 600 INR 0.00 No Rupees Only
20 mm nominal outer dia pipes
Finishing walls with water proofing cement paint of required shade two or more coats
applied @ 3.84 kg/10 sqm including one coat of water thinnable cement primer of approved
brand.
Providing and Placing in position suitable PVC water stops conforming to IS: 12200 for
construction/ expansion joints between two RCC members and fixed to the before pouring
concrete etc. complete :reinforcement with binding wire ‐ Serrated with central bulb (225
mm wide, 8‐11 mm thick)
Extra for providing and mixing water proofing material in cement concrete work in doses by
weight of cement as per manufacturer's specification.
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of
handles (best make of approved quality) for aluminium doors including necessary cutting and
making good etc. complete.
Providing and laying in situ seven course water proofing treatment with APP (Atactic poly‐
propylene) modified Polymeric memberane over roof consisting of first coat of bitumen
primer @ 0.40 Kg per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which
shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers
of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm
weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film
sandwiched on both sides with polymeric mix and the polymeric mix is protected on both
side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of
class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2%
integral water proofing compound by weight of cement over a 12 mm layer of cement mortar
1:3 (1 cement : 3 fine sand) and finished neat.
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than
grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary
screws etc. complete ‐100mm
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not
less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with
nuts and screws etc. complete : a) 250 mm x 16 mm
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for
hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe
with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases and making good the same including testing of
joints complete as per direction of Engineer in Charge. Concealed work, including cutting
chases and making good the walls etc.
15 mm nominal outer dia pipes
FORM NO: 02‐0000‐0021F2 REV1 SHEET 27 of 30 All Rights Reserved
Sq.M. 50 INR 0.00 No Rupees Only
32
per cm
depth per
100 m
290 INR 0.00 No Rupees Only
33 Sq.M 72360 INR 0.00 No Rupees Only
34per cm
depth per 164600 INR 0.00 No Rupees Only
35 Each 2 INR 0.00 No Rupees Only
Providing and laying integral cement based water proofing treatment including preparation
of surface as required for treatment of roofs, balconies, terraces etc consisting of following
operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water
proofing compound conforming to IS. 2645 and approved by Engineer‐in‐charge over the
RCCslab including adjoining walls upto 300 mm height including cleaning the surface before
treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with
50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer‐in‐charge over 20 mm thick
layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer‐in‐charge to
required slope and treating similarly the adjoining walls upto 300 mm height including
rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/
sqm of cement admixed with water proofing compound conforming to IS : 2645 and
approved by Engineerin‐ charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4
coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved
by Engineerin‐ charge including laying glass fibre cloth of approved quality in top layer of
plaster and finally finishing the surface with trowel with neat cement slurry and making
pattern of 300x300 mm square 3 mm deep.
Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to
IS: 1838, including cost of primer, sealing compound Grade‐A in expansion joints.
Supply, Providing and laying 1.0 mm Smooth HDPE Geomembrane Liner conorming to Indian
code of practice to make the under layer of reservior impermeable as per design drawing and
as directed by EIC complete in all rsepects.
Providing and laying in position bitumen hot sealing compound for Expanation / Construction
joints etc. ‐ Using grade 'A' sealing compound.
Providing & fixing in R.C.C. work, Single Face sluice gate, Class‐1( Rising Type) of 1000 mm
square size, conforming to IS : 3042 (Figure 1‐B) along with hand wheels, spindles, guide
rails& all other fitting accessories required, complete as per drawing and directions of
Engineer‐in‐Charge
(e) The whole terrace so finished shall be flooded with water for a minimum period of two
weeks for curing and for final test.“All above operations to be done in order and as directed
and specified by the Engineer‐in‐Charge : ‐ With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
31
FORM NO: 02‐0000‐0021F2 REV1 SHEET 28 of 30 All Rights Reserved
36 MT 15 INR 0.00 No Rupees Only
37 Te 75 INR 0.00 No Rupees Only
38 Kg. 700 INR 0.00 No Rupees Only
39 Kg. 500 INR 0.00 No Rupees Only
40 Sq.m 100 INR 0.00 No Rupees Only
41 Sq.m 50 INR 0.00 No Rupees Only
Supplying, fabricating and fixing in position M.S. holding down bolts assembly consisting
of bolts, heads, nuts, washers etc., and the like including embedding in cement
concrete/R.C.C. works as per approved drawings complete in all respects including one
coat of approved quality anti‐corrosive paint over a coat of approved quality primer.
Providing and fixing rolling shutters of approved make made of 80 mm wide MS laths and
interlocked together through their entire length and jointed together at the ends by end
locks, mounted on specially designed pipe shaft with bracket plates, guide channels and
arrangement for inside and outside locking with push ‐pull operation complete including cost
of wire spring and hood cover for the shutters and painting with synthetic enamel paint of
approved brand and manufacture of required colour to give an even shade ‐ new work with
two coats inculding a coat of approved steel primer and a coat of mordant solution with 38
gms of copper acetate in a litre of soft water.
Extra for providing mechanical device chain and crank operation for operating rolling
shutters.
Supplying, transporting, de‐rusting, fabricating, erecting, hoisting and fixing in position
with necessary welding and/or bolting with MS bolts conforming to property class 4.6 of IS:
1367 at all heights as per approved fabrication drawings of all types of structural steel work
in columns, portals, girders, lattice girders, beams, crane girders, M.S rails, monorails,
bracings, trusses, purlins, rafters, side runners, sag rods, hand railings, staircase stringers
and steps, walkway, toe‐plates, floor grids, sag rods with M.S. rounds, side walling,
conveyor gantries, trestle for pipe and cable racks, gusset plates, etc., either made of rolled
steel joists, channels, angles, tees, flats, plates or built up from plates and/or rolled
steel sections including necessary site and shop fasteners, complete in all respects as per
approved fabrication drawings, standards and direction of Engineer‐in‐Charge :‐ With
providing and applying primer coat, intermediate coats and finish coat after the preparation
of surfaces on structural steel work complete in all respects as per technical specifications
and direction of Engineer‐in‐Charge.
Providing and fixing M.S pipe hand railing (medium grade) conforming to IS‐1239 consisting
of top and middle horizontal rails of 40 mm dia. and 32 mm dia. nominal bore
respectively, 1050 mm high upright members of 40 mm dia. nominal bore at 1500 mm
maximum distance centre to centre of each member including all joints, bends , elbows,
and specials as required and upright members welded or bolted to structural steel work/toe
plates or welded to M.S. insert plates with M.S. lugs embedded in R.C.C. works, complete
in all respects and as per direction of Engineer‐in‐Charge :‐ Two coats of chlorinated rubber
based paint at dry film thickness of 40 microns per coat over two coats of high built zinc
phosphate primer compatible to chlorinated rubber based paint at dry film thickness of 25
microns per coat.
Supplying, fabricating, erecting and fixing in position to line and level all M.S Inserts such as
anchor plates, angles, tees, channels, plates with lugs, hooks, sleeves etc. embedding in
cement concrete /R.C.C. works at all levels including welding, bolting, drilling, cutting,
scaffolding, holding in position, providing one coat of approved anti‐corrosive paint and / or
Bituminous paint on exposed surfaces, etc. all complete in all respects and as per direction of
Engineer‐in‐Charge.(Templates if any required for fixing the inserts will not be paid for).
FORM NO: 02‐0000‐0021F2 REV1 SHEET 29 of 30 All Rights Reserved
42 Te 3 INR 0.00 No Rupees Only
43 Cu. M 365900 INR 0.00 No Rupees Only
44 LS 1 INR 0.00 No Rupees Only
0.00 No Rupees Only
A 0.00
B
C 18% (Eighteen Percent)
D
E
F TOTAL GST AMOUNT (in Words)
0.00
No Rupees Only
TOTAL AMOUNT IN FIGURES ( A + E )
TOTAL AMOUNT IN WORDS ( A + E )
0.00
No Rupees Only
No Rupees Only
APPLICABLE GST (INCLUDING CESS/SURCHARGE, IF ANY )
BIDDER TO INDICATE APPLICABLE SAC/HSN CODE
TOTAL GST AMOUNT (in Figures)
GRAND TOTAL OF PART A, PART B, PART C & PART D (INR, In Words), Including all
Taxes, Duties & Cess, Excluding GST
Supplying , fabricating and erecting M.S entrance gates consisting of M.S pipes of medium
duty frame and M.S rods welded together including heavy duty fittings such as locking
arrangement and guide rail embedded in concrete as per drawing and rollersfor
smoothoperation all complete and painting as per technical specifications and as per
directions of Engineer‐in‐Charge. (All material supply is in contractor's scope)
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by
mechanical means, including loading, transporting, unloading to municipal approved
dumping ground or as approved by Engineer‐in‐charge, beyond 50 m initial lead, for all leads
including all lifts involved.
RELEVANT GEO‐TECHNICAL TESTS FOR SOIL INVESTIGATION
TOTAL AMOUNT FOR SCHEDULE OF RATES FOR CIVIL WORKS
GRAND TOTAL OF PART A, PART B, PART C & PART D (INR, In Figures), Including all
Taxes, Duties & Cess, Excluding GST
G
FORM NO: 02‐0000‐0021F2 REV1 SHEET 30 of 30 All Rights Reserved