Section C-Technicians Tools of CARQUEST Service Line Catalogue

Technicians ToolsTable of Contents

Air Compressors & Accessories........................... C14 - C18 Air Tools................................................................ C18 - C34 Ammco Brake Lathe Accessories.................. C104 - C109 Battery Chargers................................................... C10 - C14 Calipers................................................................. C74 - C75 Drill Bits & Accessories........................................ C35 - C44 Micrometers.......................................................... C74 - C75 Power Tools........................................................... C34 - C35 Pullers................................................................... C69 - C73 Rivet Tools & Accessories.................................... C54 - C57 Saws & Saw Blades.............................................. C77 - C78 Shop Equipment........................................................ C1 - C9 Specialty Tools.................................. C58 - C63, C66 - C104 Thread Repair....................................................... C44 - C53 Torque Wrenches.................................................. C75 - C77 TPMS Tools & Accessories................................... C63 - C66

CARQUEST Service Lines Catalog

Technicians ToolsIndex Symbols1 Hexagon SAE Dies........................................ C46 4WD Bearing Lock-Nut Tool.............................. C84 4WD Wheel Bearing Locknut Tool............................................ C83 - C84 4WD Wheel Bearing Lock-Nut Tool................... C84 4 Wheel Drive Spindle Remover....................... C84 4x4 Pressed Hub Rotor Adapter, 1 I.D............ C107 5-Ton Single Pressure Beam Bearing Splitter Set.............................. C101 18 Pc. Master Axle Puller Kit............................. C58 Battery Terminal & Wiper Arm Puller................ C72 Bearing and Pulley Puller Set........................... C68 Bearing Packer................................................. C97 Bearing Race and Seal Driver........................... C69 Bearing Race & Seal Driver Kit......................... C62 Bee Hive Quick Change Retainer...................... C33 Bench Grinder................................................... C35 Blind Rivet Gun................................................. C33 Blind Rivets............................................. C55 - C56 Blow Gun.......................................................... C18 Bottoming Taps................................................. C45 Brake Adjustment Tool...................................... C80 Brake Bleeders................................... C6 - C7, C79 Brake Bleeder Wrench...................................... C79 Brake Bleeding Kit............................................ C79 Brake Caliper Hex Bit Set................................. C79 Brake Caliper Torx Bit Set.............................. C80 Brake Cylinder Hones....................................... C81 Brake Drum and Rotor Puller............................ C69 Brake Drum Micrometer................................... C74 Brake Lathe Accessories.................... C104 - C109 Brake Pad Spreader.......................................... C80 Brake Return Spring Pliers............................... C81 Brake Return Spring Tool.................................. C81 Brake Spring Pliers........................................... C81 Brake Spring Tool.................................... C80 - C81 BrakeVac II.......................................................... C5 Brass Air Manifold............................................ C16 Broken Plug Remover for Ford 3-Valve.......... C103 Bubble Flaring Tool Kit...................................... C61 Budd Wheel Socket Kit..................................... C60 Computer Safe Circuit Tester............................ C85 Continuity Tester............................................... C85 Cooling System Pressure Test Kit..................... C61 Cordless Angle Grinder..................................... C34 Cordless Impact Wrench................................... C34 Cordless Power Tools........................................ C35 Cut-Off Tool....................................................... C31 CV Boot Clamp Pliers........................................ C83 CV Joint Banding Tool....................................... C83

DDamaged Screw Remover.............................. C103 Decoder............................................................ C67 Die Grinder.............................................. C29 - C31 DieselTune 4000................................................. C1 Die Stocks......................................................... C47 Differential Additive............................................ C3 Digital Torque Adapter...................................... C77 Disc Brake Hone............................................... C81 Disc Brake Pad Spreaders................................ C80 Disc Brake Piston Tool...................................... C80 Disconnect........................................................ C92 Disconnect Kit................................................... C62 Disconnect Set.................................................. C60 Disconnect Tool................................................. C82 Disconnect Tools............................. C82, C92 - C95 Disc Rotor/Ball Joint Gauge.............................. C74 Door Upholstery Remover................................. C92 Double End Drill Bit........................................... C41 Double Flaring Tool Kit...................................... C61 Double Flaring Tool Set..................................... C95 Drill Bits.................................................. C35 - C41 Drill Bit Sets...................................................... C40 Drill Chucks...................................................... C43 Drill-Out Kit....................................................... C52 Drill-Outs.......................................................... C53 Drum Gauge...................................................... C75 Dual Drive Stubby Metric Hex Bit Set............. C101 Dual Fuel System Cleaning Center..................... C1 Dual Overhead Cam (DOHC) Lock Tool........................................................... C86 Dwell/Tach Tester............................................. C66 Dye Smoke Solution........................................... C5

AA/C Clutch Removal Kit..................................... C61 A/C Clutch Remover & Installer Kit................... C61 A/C Coil and Vent Cleaner................................... C3 AC/DC Voltage Probe......................................... C66 AC & Fuel Line Disconnect Set......................... C93 A/C Line Disconnect Tool.................................. C92 Adapteck Auto Adapter Set............................. C106 Adapteck Light Truck Adapter Set.................. C107 Air Compressors..................................... C14 - C15 Air Conditioning/Fuel Line Disconnect Tool Set.......................................... C93 Aircraft Drill Bits............................................... C40 Air/Draulic Rivet Gun........................................ C33 Air Drill.................................................... C27 - C28 Air Hammer...................................................... C32 Air Hammer Safety Chuck................................ C33 Air Hose.......................................... C16 - C17, C20 Air Hose Reel.................................................... C16 Air Line Disconnect........................................... C92 Air Nibbler......................................................... C33 Air Tank............................................................. C16 Air Tank Repair Kit............................................ C16 Ammco Abrasive Pads & Tools For NonDirectional Finish............................................ C108 Ammco Brake Lathe Accessories....... C104 - C109 Analog Tester.................................................... C66 Angled Disconnect............................................ C92 Angle Die Grinder.................................... C29 - C30 Angle Drill......................................................... C28 Angle Sander.................................................... C34 Automatic Coolant Exchanger............................ C4 Axle Nut Socket Kit........................................... C61 Axle Nut Sockets............................................ C102

CCaliper Compressor.......................................... C80 Calipers............................................................. C74 Cam Tool........................................................... C86 Carbide Bits........................................ C104 - C106 Carburetor Adjusting Tool................................. C88 Car Computer Decoder..................................... C67 Chicago Pneumatic Tools...................... C20 - C33 Chisels.............................................................. C32 Chop Saw......................................................... C35 Chrysler Fuel Line Quick Disconnect Tool......... C93 Chrysler/Jeep Cam Tool Set.............................. C86 Chuck Key......................................................... C43 Circuit Testers................................................... C86 Clutch Alignment Tool....................................... C82 Clutch Coupling Disconnect Tool - Ford............ C93 Clutch Pilot Bushing Remover.......................... C83 Clutch Pilot Tool Set SAE/Metric....................... C61 Clutch Screwdriver Insert Bits.......................... C42 Cobalt Drill Bits....................................... C35 - C36 Coil Spring Compressor Kit............................... C60 Combination 4WD Wheel Bearing Lock-Nut Tool.................................................... C84 Combustion Leak Detector............................... C96 Compact Drill.................................................... C28 Compression Tester.......................................... C67

EElectronic Digital Rotor Gauge.......................... C74 Exhaust Manifold Spreader.............................. C90 External Snap Ring Pliers............................... C100

BBack-Up Plates................................................. C56 Ball Joint Intermediate Service Kit................. C102 Ball Joint Separator........................................ C103 Ball Joint Socket Kit......................................... C63 Ball Joint/U-Joint Service Kit............................ C59 Battery Brush.................................................... C78 Battery Carrier.................................................. C79 Battery Chargers..................................... C11 - C14 Battery Load Tester................................. C66 - C67 Battery Service Tool Kit.................................... C79 Battery Terminal Clamp Spreader/Cleaner Pliers.................................... C79

FFan Clutch Spanner Wrench............................. C81 Fan Clutch Wrench Master Kit.......................... C59 Fan Clutch Wrench Set for Ford........................ C81 Feeler Gauge.......................................... C96 - C97 Filter Wrench........................................ C97 - C100 Flex Bit Holder.................................................. C42 Flexzilla 3/8 Air Hose................................... C17 Fluid Evacuator................................................... C7 Fluid Exchange System...................................... C4


Technicians ToolsAlphabetic IndexFord 6.0L High Pressure Fuel Rail Adapters.................................................... C88 Ford 6.0L Injector Pressure Regulator Socket.. C88 Ford 6.0L Terminal Release Tool....................... C88 Ford and GM Quick Disconnect Tool................. C93 Ford Axle Shaft Seal Installer........................... C69 Ford F-150 Spark Plug Socket........................ C101 Ford Hydraulic Clutch Line Disconnect Tool...... C93 Ford Ignition Module Tool................................. C90 Ford/Mercury Oil Cooler Line Disconnect Tool.. C94 Ford Power Steering Pump Pulley Installer...... C70 Ford Transmission Oil Cooler Line Disconnect Set.................................................. C94 Foreign Car Computer Decoder........................ C67 Fork Set............................................................ C60 Front End Service Kit........................................ C60 Front Hub Remover & Installer Kit.................... C62 Fuel & AC Disconnect Tool................................ C94 Fuel Injection Service Kit.................................. C88 Fuel Injector Cleaner........................................ C88 Fuel Line Disconnect Tool................................. C94 Fuel Module Disconnect for GM........................ C94 Fuel Tank Lock Ring Wrench............................. C88 Fuel & Transmission Line Disconnect Kit.......... C59 Fuel & Transmission Line Disconnect Tool........ C94 Fwd Bearing Remover & Installer Kit................ C62 Hydraulic Valve Lifter Puller.............................. C71 MV3 Detergent.................................................... C3

IIgnition Module Wrench for Ford...................... C90 Ignition Spark Tester......................................... C90 Impact Wrench.......................C19 - C21 - C27, C34 Inductive Timing Lights..................................... C91 Industrial Drill Bits............................................ C38 Industrial Reduced Shank Drill Bits.................. C38 Infrared Thermometer...................................... C97 Injector Pressure Regulator Socket.................. C88 Inline Spark Tester............................................ C91 Inner Tie Rod Remover Kit................................ C62 Inner Tie Rod Tool........................................... C103 Intake Cleaner.................................................... C2 IPR Socket for Ford Diesel................................ C88

NNitrogen 3/8 Air Hose Reel.............................. C16 Noid Test Light Kit............................................. C62 Nylon Recoil Hose............................................. C18

OO2 Sensor Offset Socket................................. C101 OBD II Code Reader Tester................................ C67 Oil Filter Pliers................................................ C100 Oil Filter Sockets.............................................. C99 Oil Filter Wrench..................................... C97 - C99 Oil Pressure Switch Socket............................ C102 O-Ring and Seal Pick........................................ C69 Oxygen Sensor Socket.................................... C102 Oxygen Sensor Socket Kit................................ C59 Oxygen Sensor Thread Chaser........................ C104 Oxygen Sensor Thread Repair Kit..................... C51 Oxygen Sensor Wrench................................... C101

JJigsaw Blades.................................................. C78

KKeyless Chucks................................................. C43

PPickle Fork Kit................................................. C102 Pilot Bearing Puller........................................... C71 Pilot Bearing Puller Kit...................................... C58 pindle Nut Wrench............................................ C83 Pinion Shaft Seal Installer, Magnetic................ C69 Pipe Taps.......................................................... C45 Pistol Drill......................................................... C28 Piston Ring Installer.......................................... C87 Pitman Arm Puller............................................. C72 Pivot Pin Remover............................................ C95 Plastic Rivets.................................................... C57 Plastic Rivet Tool............................................... C57 Pliers................................................................. C81 Plug Taps.......................................................... C45 PM Fuel System.................................................. C2 PM Test Kits........................................................ C5 Pneumatic Power Tools.......................... C19 - C35 Polyurethane Air Hose...................................... C17 Power Bits........................................................ C42 Power Steering Fluid Exhanger.......................... C5 Power Steering Pulley Puller Kit....................... C58 Power Steering Pump & Alternator Pulley Puller.................................. C70 Power Steering Service 2-Step Kit..................... C5 Pressure Gauge................................................ C16 Professional Fuel System Service...................... C1 ProValue Chisels........................................... C32 ProValue Tools............C18 - C19, C21, C27, C29, C31 - C33 Pry Bar Head..................................................... C89 Pry Bars............................................................ C89 Pullers..................C58 - C59, C68 - C73, C79, C101 Pulley Puller...................................................... C70 Pulley Puller / Installer...................................... C71 Pulley Remover & Installer Kit.......................... C62 Push Type Punch & Die Kit................................ C33 Putty Knife/Scraper.......................................... C89 PVC Air Hose..................................................... C17

LLarge Diameter Hexagon SAE Dies................... C46 Large Gear Puller.............................................. C72 LeakMaster Evaporitive Emissions System Tester.................................... C8 Leak Tamer Plus Evap......................................... C8 Leak Test............................................................. C3 Left-Hand Drill Bits........................................... C40 Letter Gauge Drill Bits....................................... C41 Limited Slip Additive........................................... C3 Lock Ring Pliers.............................................. C100 Long Range Indicator Tool Set.......................... C74 Low Circuit Tester............................................. C86

GGapper.............................................................. C91 Gear Puller........................................................ C73 GM Heater Line Disconnect Tool....................... C94 GM Hydraulic Clutch Line Disconnect Tool....... C94 GM Power Steering Pump Pulley Remover/Installer............................................. C70

HHacksaw........................................................... C77 Hacksaw Blades............................................... C78 Hand-Held Vacuum Pump................................... C6 Harmonic Balancer Puller....................... C69 - C70 Harmonic Balancer Puller & Installer Kit.......................................... C58 Harmonic Balancer Puller/Installer Kit............. C58 HD Transmission Fluid Exchange System........... C4 Head Bolt Thread Repair Kit.............................. C52 Heater Hose Coupler Remover.......................... C81 Heater Hose Disconnect Tool............................ C82 Heavy-Duty Circuit Tester................................. C85 HeliCoil................................................... C48 - C57 High-Low Circuit Tester.................................... C85 High Pressure Fuel Rail Adapters..................... C88 High Speed Drill Bits................................. C37, C40 High Speed Steel Drill Bits................................ C39 Hole Saw Mandrels........................................... C43 Hole Saws......................................................... C44 Hone................................................................. C81 Hones................................................................ C81 Hood Prop....................................................... C100 Hose Pinchers................................................... C82 Hose Remover.................................................. C82

MMagnetic Induction Heating System................... C9 Magnetic Nutsetters......................................... C42 Magnetic Pick-up Tool...................................... C89 Master Disc Brake Service Kit.......................... C62 Master Disconnect Set..................................... C60 Master Hub Puller Set Kit................................. C58 Maxi-Ject Pro Brake Bleeder.......................... C6 Mechanics Stethoscope................................... C91 Memory Saver.................................................. C14 Metric Hexagon Dies......................................... C46 Metric Taps....................................................... C45 Micrometer....................................................... C74 Mini Tubing Cutter............................................. C95 Mitchell Guide................................................... C66 Mityvac 7.3 Liter Fluid Evacuator....................... C7 Mityvac Fluid Evacuator Plus.............................. C7 Mityvac PneumatiVac......................................... C8 Mityvac Pressure Bleed System......................... C5 Mityvac Silverline Elite Automotive Kit............... C6 Mityvac Vacuum Brake Bleeder.......................... C6 Module & Sensor Tester.................................... C66 MotorVac.................................................... C1 - C5 MotorVac Steer Clean 1000................................ C5 MultiTesters.............................................. C66, C68


Technicians ToolsAlphabetic Index RRadio Removal & Antenna Installation Kit........ C63 Radio Removal Tool.......................................... C92 Rakes.................................................. C104 - C106 Ratcheting Lock Nut Tool.................................. C84 Ratcheting Tube Cutter..................................... C95 Ratchet Wrench...................................... C18 - C21 Razor Blades..................................................... C90 Rear Axle Puller Kit........................................... C58 Reciprocating Blades........................................ C78 Reciprocating Saw........................................... C33 Recoil Hose....................................................... C18 Reduced Shank High Speed Split Point Drill Bits........................................... C37 Reduced Shank Silver & Deming Drill Bits....... C37 Relay Test Jumper Kit....................................... C84 Relay Test Jumper Kit II.................................... C84 Remote Starter................................................. C85 Replacement Batteries..................................... C34 Rethreading Die Set.......................................... C45 Retrieving Tool.................................................. C89 Reversible Drill................................................. C27 Right Angle Grease Gun Adapter....................... C97 Ring Compressor.............................................. C87 Ring Groove Cleaner......................................... C87 Rivets...................................... C33, C54, C55 - C58 Rivet Tools........................................................ C54 Rocker Stoppers............................................... C87 Rotor Gauge...................................................... C74 Rotor Micrometer............................................. C74 Rubber Air Hose................................................ C17 Spark Plug Thread Repair Kit............................ C52 Spark Plug Wire Puller...................................... C72 Spark Plug Wire Tester..................................... C91 Specialty Switch Socket Kit.............................. C60 Specialty Tool Kits................... C59 - C64, C71, C90 Speed Cutter..................................................... C32 Spindle Nut Socket........................................... C83 Spindle Nut Socket Kit...................................... C60 Spindle Nut Wrench.......................................... C83 Spiral Flute Screw Extractor............................. C47 Square-Drive Socket Adapter........................... C42 Stamp Set......................................................... C89 SteerClean SCK1000 2 Step Kit.......................... C5 Steering Wheel & Lock Plate Puller Kit............. C59 Steering Wheel Lockplate Tool.......................... C71 Steering Wheel Lock Plate Tool......................... C71 Steering Wheel Puller....................................... C71 Steering Wheel Puller Kit.................................. C59 Stethoscope...................................................... C91 Stone-Type Glaze Breaker................................ C86 S-Tool Canister................................................... C2 Straight Edge.................................................... C74 Straight Flute Screw Extractors........................ C48 Strap Wrench.................................................... C98 Strut Spring Compressor Kit............................. C59 StrutTamer Extreme............................................ C9 Strut Tool........................................................ C103 Stubby Ratchet Wrench.......................... C18 - C19 Super Out Set................................................. C103 TransTech IV........................................................ C4 T-Rivets............................................................. C56 Tube Bender...................................................... C96 Tubing Bender................................................... C96

UUniversal Hub Puller......................................... C69 Upper Control Arm Bushing Service Kit............ C63 Utility/Muffler Cut-Off Tool................................ C31

VV-12 Injector Brake Bleeder........................... C7 Vacuum & Fuel Pump Tester............................. C67 Vacuum Gauge and Fuel Pump Tester.............. C88 Vacuum Pump..................................................... C6 Valve Core Torque Tool...................................... C66 Valve Holder...................................................... C87 Valve Lappers................................................... C87 Valve Spring Compressor................................. C87 Valve Spring Compressor Kit............................ C63 Valve Tappet Feeler Gauge............................... C97 Valve Tool.......................................................... C65 Variable Pin Spanner Wrench........................... C86

WWater Pump Holding Tool.................................. C82 Water Pump Sprocket Holder for Ecotec.......... C82 Water Pump Wrench......................................... C82 Well-Nut Threaded Inserts................................ C53 Wheel Bearing Locknut Kit............................... C61 Wheel Bearing Lock Nut Socket............. C83 - C84 Wheel Charger........................................ C10 - C12 Window and Door Clip Remover / Installer....... C92 Windshield Locking Strip Tool........................... C96 Wire Cup Brush............................................... C104 Wire End Brush............................................... C104 Wire Gauge Drill Bits......................................... C41 Wrinkle Band Ring Compressor........................ C87

TTailpipe Expander............................................. C90 Taper Bearing Attachments.............................. C70 Tapered Reamer............................................... C47 Tap & Hex Die Set................................... C44 - C45 Taps & Dies............................................. C45 - C48 Tap Wrenchs..................................................... C47 Telescoping Inspection Mirror.......................... C92 Telescoping Mirror............................................ C92 Terminal Release Tool...................................................... C88 Terminal Tool.................................................... C85 Testers......................................C8, C12, C66 - C67, ......................................C85 - C86, C88, C90 - C91 Thread Gauges.................................................. C47 Thread Repair............................... C48 - C53, C109 Tie Rod Ball Joint Separator........................... C102 Tie Rod/Ball Joint Separator Kit........................ C60 Tie Rod Puller................................................... C72 Tie Rod Rattler................................................ C100 Tie Rod Separator........................................... C103 Timing Gear Puller............................................ C70 Timing Lights.................................................... C91 Tire Inflator....................................................... C65 Titanium Coated Drill Bits................................. C39 Torque Wrench................................ C65, C75 - C76 TPMS...................................................... C63 - C67 Transmission Fluid Exchange System................ C4 Transmission Oil Cooler Line Scissors.............. C95

SSav-A-Thread Kits............................................ C51 Scraper............................................................. C89 Screwdriver Bits............................................... C41 Screw Extractors.............................................. C47 Screw Extractor Set.................................. C47, C48 Scribe............................................................. C104 Seal Puller........................................................ C68 Sensor Socket Set.......................................... C101 Seperator Set.................................................. C102 Serpentine Belt Tool.................................. C63, C90 Serpentine Belt Tool Kit.................................... C90 Serrated Wrenches........................................... C42 Sheet Metal Inserts.......................................... C54 Sheet Metal Insert Tool..................................... C54 Sheet Metal Mandrel/ Nosepiece Set................................................... C53 Shop Equipment............................. C1, C4 - C6, C8 Single Spring Brake Tool................................... C80 Slide Hammer Puller......................................... C68 Small Engine Valve Spring Compressor............ C87 Snap Ring Pliers............................................. C100 Sneaky Pete...................................................... C68 Spark Plug Chaser.......................................... C104 Spark Plug Gapper............................................ C91 Spark Plug Hole Thread Chaser...................... C104

ZZirconium Step Drill Bits................................... C38


Technicians ToolsShop Equipment

DieselTune 4000The DieselTune is a 2-line cleaning system that connects to the engine through OEM specific adapters. The IDT 4000 passes a concentrated mixture of MotorVac cleaning detergent and diesel fuel through the components of the fuel system while the engine is running. The system removes organic and inorganic fuel deposits that build up in fuel injectors, injection pumps and combustion chambers. Carbon, gum and varnish deposits in the entire upper engine are dissolved and removed during combustion, then passed through the exhaust. MFG Part Number MVC 500-4006P Description MotorVac DieselTune 4000 Diesel System Service

Image Shown: 500-4006P

Dual Fuel System Cleaning CenterThe MCS 352 services both gasoline and diesel engines to clean the entire fuel system. When used with fuel system cleaning detergents and the Intake Cleaning Kit, the MCS 352 system cleans the gasoline engines air plenum, throttle body, air bypass valve, injectors, valves, combustion chambers, oxygen sensor and catalytic converters without having to remove any engine components. When used with diesel detergent, the MCS 352 system cleans the diesel fuel injectors, injector pump and combustion chambers. MFG Part Number MVC 500-0352 Description MotorVac Technologies, Inc. 500-0352 Carbon Clean Dual Fuel System Cleaning Center

Image Shown: 500-0352

Professional Fuel System ServiceMotorVacs two-line cleaning system connects to the engine using vehicle specific adapters, temporarily replacing the vehicles fuel system. During the first cleaning phase (with the engine off) the system circulates MotorVacs powerful yet safe proprietary cleaning MV3 detergent mixed with gasoline through the components of the engines fuel system. This phase safely dissolves contaminants, gum and varnish deposits, capturing them in the units ten micron filter. The air intake plenum, throttle body and intake runners are cleaned utilizing the ICS kit in conjunction with the foaming MV4 detergent. During the second cleaning phase (engine running), the injector screens, intake & exhaust valves, top of pistons, combustion chamber, oxygen sensor, and catalytic converter are cleaned. This safely dissolves and removes most of the soft carbon deposits, passing them harmlessly out with the exhaust. MFG Part Number MVC 500-0245 Description MotorVac Technologies, Inc. 500-0245 Carbon Clean Professional Fuel System Service



C1

Technicians ToolsP/M Solutions (Chemicals) - Gasoline - P/M Solutions (Chemicals) - Diesel Fuel CARQUEST PM Fuel System Service StepsStep 1 - Fuel Additive Step 2 - Fuel Conditioner Step 3 - Engine Decarbonizer Step 4 - Air Intake Cleaner Step 5 - Fuel System Cleaner

CARQUEST PM Fuel System Service Fuel Conditioner (Step 2) CARQUEST PM Fuel System Service 2-Step Kit (Steps 1, 3)Step 1 - Fuel Additive, Step 3 - Engine Decarbonizer MFG Part Number PMC 85Image Shown: 85

Step 2 - Fuel Conditioner MFG Part Number PMC 74

Image Shown: 74

Description CARQUEST PM Fuel System Service Fuel Conditioner (Step 2)

Description CARQUEST PM Fuel System Service 2-Step Kit (Steps 1, 3)

CARQUEST PM Fuel System Service 3-Step Kit (Steps 2, 3, 4)Step 2 - Fuel Conditioner Step 3 - Engine Decarbonizer Step 4 - Air Intake Cleaner MFG Part Number PMC 84Image Shown: 84

CARQUEST PM Fuel System Service Engine Decarbonizer (Step 3)Step 3 - Engine Decarbonizer MFG Part Number PMC 31Image Shown: 31

Description CARQUEST PM Fuel System Service 3-Step Kit (Steps 2, 3, 4)

Description CARQUEST PM Fuel System Service Engine Decarbonizer (Step 3)

CARQUEST PM Fuel System Service 4-Step Kit (Steps 2, 3, 4, 5)Step 2 - Fuel Conditioner Step 4 - Air Intake Cleaner Step 3 - Engine Decarbonizer Step 5 - Fuel System Cleaner MFG Part Number PMC 1041

CARQUEST PM Fuel System Service Air Intake Cleaner (Step 4)Step 4 - Air Intake CleanerImage Shown: 1041 Image Shown: 141

MFG Part Number PMC 141

Description CARQUEST PM Fuel System Service 4-Step Kit (Steps 2, 3, 4, 5)

Description CARQUEST PM Fuel System Service Air Intake Cleaner (Step 4)

CARQUEST PM Fuel System Service Fuel Additive (Step 1)Step 1 - Fuel Additive MFG Part Number PMC 73Image Shown: 73

CARQUEST PM Fuel System Service S-Tool Canister (Step 5)Step 5 - Fuel System Cleaner MFG Part Number PMC ST2Image Shown: ST2

Description CARQUEST PM Fuel System Service Fuel Additive (Step 1)

Description CARQUEST PM Fuel System Service S-Tool Canister (Step 5)

C2


Technicians ToolsA/C Chemicals - P/M Solutions (Chemicals) - Differentials

MV4 DetergentMV4 incorporates a foaming action to decarbonize the air intake, plenum, throttle body, intake runners and intake valves and is applied using the ICS kit or the S-Tool Canister.

CARQUEST PM Diesel Fuel Service 2-Step Kit1 Step - Diesel Fuel System Cleaner 2 Step - Diesel Fuel Treatment MFG Part Number PMC 1040Image Shown: 1040

MFG Part Number MVC 400-0030

Description CarbonClean MV4 Intake System Cleaning Detergent and Upper Engine Cleaner 12 x 8 oz. (236 mL) Bottles

Description CARQUEST PM Diesel Fuel Service 2-Step Kit

CARQUEST PM Oil 3-Step Service Kit1 Step - Engine Oil System Cleaning Detergent 2 Step - Engine Oil System Treatment 3 Step - Special 5-Micron Filter MFG Part Number PMC 1039 PMC 1026

Leak Test for Gas & DieselUview Combustion Leak Detector Uvw 560000 : Combustion Leak Detector Fast, Economical and Accurate method to test for combustion gas leaks from: Head gasket leaks Cylinder head leaks Engine block leaks NEW & IMPROVED! DualChamber for Higher Accuracy Test The tester features a dual-chamber design for higher accuracy to eliminate false readings. The first chamber will filter out any alkaline particles that could result in a false indication of a combustion leak. Test results in the second chamber will provide a true indication of a combustion leak. Works on: Gasoline and Diesel engines! MFG Part Number Description UVW 560000 Combustion Block Leak Test for Gas & Diesel

Image Shown: 1039

Description CARQUEST PM Oil 3-Step Service Kit (Steps 1, 2, 3) CARQUEST PM Oil 2-Step Service Kit (Steps 1, 2)

CARQUEST PM Differential Additive

Non-corrosive additive to reduce sludge, oxidation and improve thermal stability MFG Part Number PMC 157

Image Shown: 157

CarbonClean MV3DMotorVac MV3D detergent is designed to remove carbon from combustion chambers and injectors tosafely restore horsepower, lower opacity and restore fuel mileage in diesel engines. MFG Part Number MVC 400-0010 Description CarbonClean MV3D Industrial Diesel Tune Detergent 12 x 16 oz. (473 mL) Bottles

Description CARQUEST PM Differential Additive

CARQUEST PM Limited Slip AdditivePrevent and reduce chatter in limited slip axles MFG Part Number PMC 158Image Shown: 158

Description CARQUEST PM Limited Slip Additive

MV3 DetergentThis proprietary detergent gently steam cleans internal engine components, eliminating soft carbon and other contaminants that harm engines and impede performance. MFG Part Number MVC 400-0126Image Shown: 400-0126

CARQUEST PM Solutions A/C Coil and Vent CleanerThis kit will quickly and easily clear foul odors from a vehicles air and duct systems, including odors caused by mold and mildew. MFG Part Number PMC 159 Description CARQUEST PM Solutions A/C Coil and Vent Cleaner

Description CarbonClean MV3 Heavy Duty Gasoline Fuel System Cleaning Detergent 4 x 32 oz. (946 mL) Bottles CarbonClean MV3 Heavy Duty Gasoline Fuel System Cleaning Detergent 12 x 8 oz. (236 mL) Bottles

MVC 400-0020


C3

Technicians ToolsP/M Solutions (Chemicals) - Differentials - Shop Equipment

CARQUEST PM Transmission Service 2-Step KitStep 1 - Automatic Transmission Cleaner Fluid Step 2 - Automatic Transmission Conditioner Fluid MFG Part Number PMC 1034

Image Shown: 1034

TransTech IVThe TransTech IV combines both inline and dipstick capabilities allowing for the two most common methods of ATF exchange from a single machine. MFG Part Number MVC 500-1125

Description CARQUEST PM Transmission Service 2-Step Kit


Description TransTech IV Inline & Dipstick Automatic Transmission Fluid Exchange System

Mityvac ATF Refill SystemDispenses fluid to top-off or refill sealed automatic transmissions. Includes ten (10) adapters to connect to Ford, Toyota, BMW, Honda, Nissan, VW, Audi, Mercedes, and Volvo transmissions. Fluid is dispensed under pressure for smooth continual flow. 1.2 gallon capacity.

HD Transmission Fluid Exchange SystemThe HD TransTech is the first machine designed to exchange virtually all of the used transmission fluid in a heavy duty transmission. This turn-key transmission service system is easy to use for trucks, buses and similar vehicles. The convenient Drain Pan function allows for a spill free transmission filter change. The HD TransTech connects through the transmission cooler lines and provides a clean, environmentally friendly approach to servicing transmissions. MFG Part Number MVC 500-1150

Image Shown: MV6410

Contains: 1 - 1.2 gallon fluid reservoir 1 - Reservoir Lid 1 - 5 dispensing hose w/flow control and auto shutoff valves 1 - MVA5800 ATF refill adapter kit 1 - Fluid dispensing wand 1 - Hanging hook 1 - User Manual (English/French/Spanish/German)

MFG Part Number LIN MV6410

Description Mityvac ATF Refill System

Description Motorvac 500-1150 - HD TransTech Transmission Fluid Exchange System

Transmission Fluid Exchange SystemThe TransTech IIIs advanced electronic interface allows complete, one touch control. It even has a quick and easy Drain Pan function for spill free transmission filter changes during ATF exchange. The TransTech III connects through transmission cooler lines and provides a clean, environmetally-friendly and systematic approach to servicing automatic transmissions. The unit will flush virtually all of the old transmission fluid and replace it with the new fluid while controlling the flow automatically with the engine running. MFG Part Number MVC 500-1100P

Automatic Coolant ExchangerComplete coolant exchange in just minutes - Exchanges coolant with engine off or on - Onboard waste tank has a 28 quart capacity - One Multi-Function switch - Use CC2K Coolant Clean 2-Step Kit for a premium service - Unique vacuum switch allows for cooling system depressurization. The waste coolant may also be directed to an external waste tank to save time.Image Shown: 500-1100P

Image Shown: 500-5100P

MFG Part Number MVC 500-5100P

Description Motorvac 500-1100P - TransTech III Transmission Fluid Exchange System

Description MotorVac 500-5100P Coolant Clean 3 Automatic Coolant Exchanger

C4


Technicians ToolsShop Equipment - P/M Solutions (Chemicals) - Power Steering

CARQUEST PM Coolant Service 3-Step Kit (Steps 1, 2, 3)Step 1 - Radiator Flush Step 2 - Lubricant & Rust Prevention Step 3 - Radiator Conditioner Sealant MFG Part Number PMC 1038 PMC 1037Image Shown: 1038

CARQUEST PM Power Steering Service 2-Step KitStep 1 - Power Steering Fluid Detergent Step 2 - Power Steering Fluid Conditioner MFG Part Number PMC 1045 Description CARQUEST PM Power Steering Service 2-Step Kit

Description CARQUEST PM Coolant Service 3-Step Kit (Steps 1, 2, 3) CARQUEST PM Coolant Service 2-Step Kit (Steps 1, 2)

SteerClean SCK1000 2 Step KitSteerClean SCK1000 kits improve the operation of the steering system and extends its life. MFG Part Number MVC 400-1045 Description SteerClean SCK1000 2 Step Kit: 6 Kits - 2 x 8 oz. (236 mL) Bottles

CARQUEST PM Test KitsMFG Part Number PMC 155 PMC 156

Image Shown: 155

Description CARQUEST PM One-Drop Instant Fluid Test Pads, 100 Pads/Box CARQUEST PM Coolant Test Strips, 70 Strips/Bottle

BrakeVac II Dye Smoke SolutionUltraTraceUV dye solution is the only solution approved by GM, Ford, and Chrysler. It will not harm the activated charcoal canister, ORVR valve, purge valve, vent valve, catalytic converters, O2 sensors, seals, or gaskets. UltraTraceUV dye will not void factory warranty. MFG Part Number OTC P-0716-UV The BrakeVac II brake bleeder machine is a simple, user friendly and efficient way to flush and bleed todays high tech brake systems.


MFG Part Number Description MVC 500-8100 BrakeVac II Premium Brake Fluid Flush SystemImage Shown: P-0716-UV

Description UltraTraceUV Dye Smoke Solution

Mityvac Pressure Bleed SystemPressure bleeding hydraulic brake and clutch systems. Includes (7) master cylinder adapters to connect to most American, Asian, and European manufactured cars and light trucks. 1.2 gallon capacity.

MotorVac Steer Clean 1000 Power Steering Fluid ExhangerPerforms a simple, safe and power steering fluid exchange in just minutes. Efficient process results in a highly profitable, easy add-on service. Unit services both pump reservoir and remote reservoir systems. Extra long wand provides easy access for the technician. MFG Part Number MVC 500-7050

Contains: 1 - 1.2 gallon fluid reservoir 1 - Reservoir Lid 1 - 5 ft dispensing hose w/flow control and auto shutoff valves 1 - MVA6850 ATF refill adapter kit 1 - Fluid dispensing wand 1 - Hanging hook 1 - User Manual (English/French/Spanish/German) Image Shown: 500-7050

Description MotorVac Steer Clean 1000 Power Steering Fluid Exhanger


Description Mityvac Pressure Bleed System


C5

Technicians ToolsShop Equipment - Brake Bleeding Tools

Mityvac Silverline Elite Automotive KitKit includes everything for performing hundreds of automotive diagnostic and mechanical tests. Used for one-person brake bleeding. Produces vacuum or pressure at the turn of a switch. Comfortable ergonomic design. One-finger trigger vacuum/pressure release. Pressure and vacuum are created on the squeeze stroke for superior accuracy and control. Includes durable, accurate diaphragm style compound pressure/ vacuum gauge.Contains: 1 - Silverline Elite Hand Vacuum/Pressure Pump w/ 2 (50 mm) Compound Gauge w/ Rubber Boot 1 - 4.5 oz. (135 mL) Fluid Reservoir Bottle w/ Fluid Transfer and Storage Lids 4 - Tapered Adapters for Connecting to Tubing from .09 (2.3 mm) to .50 (13 mm) ID 2 - Tapered Manifold Plugs 4 - Universal Bleed Screw Adapters 12 - Vacuum Cap Plugs 1 - Vacuum Line T-Adapter 2 - 1/4 (6.4 mm) ID x 24 (610 mm) Long Connection Tubes 1 - 5/32 (4 mm) ID x 1/4 (6.4 mm) ID Tubing Adapter 3 - Connection Tubes 1 - Rubber Cupped Adapter 1 - Master Cylinder Refill Kit (model no. MVA6825) 1 - Custom Molded Case 1 - Users Manual (English, French, Spanish, German) Size Pump Displacement Max. Vacuum 12.9 (330 mm) x 9.8 (250 mm) x 4.5 (115 mm) 25 in Hg 30+ psi

Mityvac Vacuum Brake BleederThe compressed-air-operated MV6830 offers professional grade brake and clutch bleeding performance. This compact yet powerful unit bleeds up to 2 quarts (1.9 liters) per minute, and its simple operation allows clean, quick bleeding of brake and clutch lines. Kit includes an advanced selection of accessories that ensure maximum convenience and performance for greater productivity. Compressed air operation Integrated 1.9 quart (1.8 liter) capacity fluid collection reservoir Variable control thumb throttle Swivel air inlet with quick disconnect Quick disconnect coupler for accessories Quiet, muffled exhaust Automatic overflow preventionContains: 1 - Brake Bleeder 1 - 6 (1.8 m) Long Bleed Hose Assembly 1 - 4 (1.2 m) Long Fluid Evacuation Hose 1 - Molded Base with Screws for Bench Mounting 1 - Automatic Fluid Refill Kit 1 - Hanging Hook 3 - Universal Bleed Screw Adapters 1 - User Manual (English/French/Spanish/German) Reservoir Capacity Working Pressure Vacuum @ 90 psi Air Consumption @ 90 psi Flow Rate @ 60 psi Flow Rate @ 90 psi Flow Rate @ 150 psi Inlet Thread Size Weight Size 1.9 quarts 60 - 150 psi 26 in. Hg 4.3 cfm 50 oz./min 70 oz./min 70 oz./min 1/4 NPT 5.0 lbs. 9 tall x 6.5 dia.


Description Mityvac Silverline Elite Automotive Kit


Description Mityvac Vacuum Brake Bleeder

Maxi-Ject Pro Brake BleederThe Maxi-Ject Pro can develop 150 psi of injection pressure with a 15 mL injection stroke. Made of steel and die cast aluminum, the lever action handle reduces hand force and doubles injection pressure. Versatile and designed specifically for heavy-duty service. Includes a molded case. MFG Part Number CPE 33401 Description Maxi-Ject Pro Brake Bleeder

Hand-Held Vacuum PumpDesigned for both engine testing and brake bleeding. Includes pump, vacuum gauge, two 2 lengths of tubing, rubber cup adapter, reservoir jar and lid, automotive adapters, and brake bleeding adapters. MFG Part Number CPE 30416

Image Shown: 30416

Description Hand-Held Vacuum Pump

C6


Technicians ToolsBrake Bleeding Tools

V-12 Injector Brake BleederDesigned for light to medium-duty bleeding. It can develop 125 psi with comfortable hand force. The handle and body are made of high strength Zytel, glass reinforced nylon, which imparts metal-like strength with light comfort. Includes a molded case. MFG Part Number CPE 33402 Description V-12 Injector Brake BleederImage Shown: 33402

Mityvac 7.3 Liter Fluid EvacuatorVacuum is created quickly and efficiently by manual pump operation, offering superior mobility by eliminating the need for electricity or compressed air. The 07400 is ideal for draining fluids from reservoirs on boats, RVs, ATVs, snowmobiles, farm equipment or motorcycles. Includes accessories for draining engine oil or transmission fluid directly through the dipstick tubes. Convenient manual pump operation Integrated 1.9 Gallon (7.3 Liter) capacity reservoir Large base w/ foot stabilizer Durable, chemical resistant polyethylene construction Automatic overflow prevention Quick-drain pour spoutContains: 1 - Fluid Evacuator 1 - 0.23 OD x 5 long (5.7 mm OD x 1.5 m long) Dipstick Tube 1 - 0.26 OD x 5 long (6.6 mm OD x 1.5 m long) Dipstick Tube 1 - 0.41 OD x 5 long (10 mm OD x 1.5 m long) Main Evacuation Tube 1 - Tube Adapters 1 - User Manual (English/French/Spanish) Reservoir Capacity Max. Operating Temperature: Size 1.9 gallons 175F 25 tall x 7.5 dia.


Description Mityvac 7.3 Liter Fluid Evacuator

Mityvac Fluid Evacuator PlusAt the push of a button, this versatile unit changes from vacuum to pressure for evacuating or dispensing fluids. This functionality makes it ideal for draining tanks or reservoirs then pumping the used fluid back out for easy disposal. Multiple units work great, simply evacuate used fluids with one unit, and then quickly refill with new fluid from a second. For superior mobility, the 07201 utilizes a manual pump, so compressed air or electricity is not required. Accessories are included for draining engine oil or transmission fluid directly through the dipstick tubes. Evacuates or dispenses at the push of a button Convenient manual pump operation Integrated 2.3 gallon (8.8 liter) capacity reservoir Large base with foot stabilizer Durable, chemical resistant polyethylene construction Automatic overflow prevention Quick-drain pour spout

Contains: 1 - Fluid Evacuator/Dispenser 1 - 0.23 OD x 5 long (5.7 mm OD x 1.5 m long) Dipstick Tube 1 - 0.26 OD x 5 long (6.6 mm OD x 1.5 m long) Dipstick Tube 1 - 0.41 OD x 5 long (10 mm OD x 1.5 m long) Main Evacuation Tube 1 - Tube Adapters 1 - User Manual (English/French/Spanish) Reservoir Capacity Max. Operating Temperature Weight Size 2.3 gallons 175F 10.0 lbs. 24 tall x 12.4 wide x 9.3 deep


Description Mityvac Fluid Evacuator Plus


C7

Technicians ToolsShop Equipment - Fluid Evacuation Equipment

Mityvac PneumatiVacOperates on compressed air to create a powerful venturi vacuum for draining fluids from tanks and reservoirs. Compressed air hose attaches at base for stability. Includes accessories for draining engine oil or transmission fluid directly through the dipstick tubes. Also includes brake/clutch bleeding kit (Model No. 07205) for vacuum bleeding hydraulic brake and clutch systems. Operates on compressed air Integrated 2.3 gallon (8.8 liter) capacity reservoir Large base with foot stabilizer Durable, chemical resistant polyethylene construction Independent air shut-off valve Quiet, muffled exhaust Automatic overflow prevention Quick-drain pour spout

Contains: 1 - Fluid Evacuator 1 - 0.23 OD x 5 long (5.7 mm OD x 1.5 m long) Dipstick Tube 1 - 0.26 OD x 5 long (6.6 mm OD x 1.5 m long) Dipstick Tube 1 - 0.41 OD x 5 long (10 mm OD x 1.5 m long) Main Evacuation Tube 1 - Brake/Clutch Bleeding Adapter Kit (Model No. 07205) 1 - Tube Adapters 1 - User Manual (English/French/Spanish) Reservoir Capacity Max. Operating Temperature Compressed Air Inlet Size Weight Size 2.3 gallons 175F 1/4 NPT 7.5 lbs. 24 tall x 12.4 wide x 9.3 deep


Description Mityvac PneumatiVac

Leak Tamer Plus Evap Easy, effective, versatile tool to help technicians diagnose EVAP trouble codes on domestic and import cars and light trucks. Uses UltraTraceUV technology the only OEM-approved dye available. Works with nitrogen or shop air to meet all OEM test requirements. Uses existing OTC LeakTamer accessories. Uses OEM-approved technology. This technology was developed in collaboration with Ford Motor Company, GM, and DaimLer Chrysler to specifically test a vehicles EVAP system and to meet major automakers EVAP testing specifications and needs. The LeakTamer Plus EVAP Model 6521 is EVAP-approved. Accessories included with No. 6521 No. CEA-01 - 3-1/2 diameter exhaust cone No. CEA-02 - assorted cap plug kit No. CEA-04 - standard service port adapter No. CEA-049 - dual size schrader removal tool No. HS-400AC - 400,000 CP spotlight with 20 foot cord and battery clips. Description Leak Tamer Plus Evap

MFG Part Number OTC 6521

LeakMaster Evaporitive Emissions System Tester Developed specifically to diagnose vehicle EVAP system for leaks. Can also be used to diagnose and locate vacuum leaks, exhaust leaks, under dash vacuum leaks, crankcase oil leaks, and wind and water leaks. Shipped with full charge of smoke producing UV solution that can be refilled by the customer. Accessories to test EVAP systems on many import & domestic vehicles included. Description LeakMaster Evaporitive Emissions System Tester


C8


Technicians ToolsA/C Vent Cleaner & Deodorizer - Evap Diagnostic Equipment & Accessories

Magnetic Induction Heating SystemWith the OTC 6650 Magnetic Induction Heater, technicians can quickly and easily perform damagefree parts removal of all metal parts that cant easily be accomplished with flame or other radiant heat sources. With an available power rating of 1,500 watts, the OTC 6650 is ideal for mechanical repair, auto body repair and recycling facilities. It produces heat in seconds within metal objects such as body panels, nuts, bolts and pinchweld areas behind glasswithout heating or damaging nonmetallic objects such as glass, paint or plastic. The OTC 6650 package comes with bolt inductor (542936), glass inductor (542937), body inductor (542938), foot switch (543055) and instructional CD. All inductors, with exception of the body inductor, are encapsulated in a flame-retardant polymer which provides protection against impact, abrasion, heat or other accidental damage. All inductors have an electrical interlock and/or molded strain reliefs. FOCUSED AND FLAMELESS HEAT MAKE PARTS REMOVAL EASY AND FAST! Fast, effortless removal of glass, emblems, bonded body components, rusty bolts and much more. Flameless heat reduces the need for torches, solvents and abrasives. Less flame and less solvents reduce potential safety hazards and insurance rates. Will only heat metal objects, enabling it to be used in or near heat - sensitive areas. Wide range of heating inductors for increased versatility. Easy-to-read heat output meter to quickly verify induction heat. Description Magnetic Induction Heating System


StrutTamer ExtremeSimply the most effective compressor for virtually any straight, conical, or offset spring. Extreme duty design to handle the heavier springs found on mid- and some full-size truck strut assemblies. New frame includes cross bracing at arm mount locations - standard. This eliminates frame flex when compressing heavier springs. 2:1 reduction gearbox - standard. Allows for a 2:1 torque compression increase when compressing struts. Lock rings to hold arms in position - standard. This eliminates arms from spreading or sliding when compressing offset or unique strut configurations. Four-point locking jaws securely hold the spring in place. Open-ended design means you can take the strut in and out, quickly and easily. The arms adjust in and out, up and down, to accept many sizes of springs. (2-1/2 to 10 diameter) (2-1/2 to 24 vertical stroke) Extra long 3-bar handle gives user the leverage needed to compress heavier strut springs. No need to change shoes for different size springs. Easy to transport when mounted on optional stand. (No. 6592 Strut Tamer Extreme with stand; No. 6582 stand only) Comes with No. 6583 Bridge accessory to be used on springs that cannot be compressed enough to remove the retaining nut. MFG Part Number OTC 6591 OTC 6592 Description StrutTamer Extreme StrutTamer Extreme with Stand

Image Shown: 6591


C9

Technicians ToolsMagnetic Induction Heating Systems

4/20/40/70/300A 12V Microprocessor Controlled ProSeries Wheel Charger Fully Automatic or Manual High Performance for 12V Battery Systems Oversized heavy-duty selector switches Rotary output switch selects between: - 300 Amp engine start - 70 Amp rapid charge - 40 & 20 Amp fast charge - 4 Amp slow Charge Precision Timer-Controlled Operation 2-1/4 Hour Timer with Off and Hold positions for controlled or continuous recharging Large face, clear-view amp and volt meters have easy to read graduated scales Tubular, chrome-plated handle with rubber grip & unique non conductive clamp rest 600-amp heavy duty, chrome-plated steel ultra grip clamps 6-foot heavy duty, commercial gauge welding grade cables Extra long 9-foot AC line cord High volume cooling fan for efficient cooling & longer duty cycles Durable, heavy-duty steel cabinet with wide-track wheels Designed and safe for charging AGM and standard lead acid batteriesCharger Type Output Voltage Input Voltage Output Current Cont Output Engine Start Unit Height Unit Width Unit Depth Unit Weight Warranty Period Fully Automatic / Manual 12VDC 120VAC 4A / 20A / 40A 300A 19.00 11.70 11.87 36.74 lbs. 3 Years

15/30/70/300A 6/12/24V Wheel Charger Charge Rate Selector Switch - 300A Engine Start (12V) - 70A (12V & 6V) - 15A (12V) - 30A (12V) - 35A (24V) Voltmeter Ammeter 2 Hour Timer Automatic Overload Reset & Short Circuit Protection 4 Gauge 9 ft. Output Cable High Efficiency Fan Cooling System UL Outdoor Approved / CUL ApprovedCharger Type Output Voltage Input Voltage Output Current Cont Output Engine Start Unit Height Unit Width Unit Depth Unit Weight Warranty Period Manual Operation 6VDC / 12VDC / 24VDC 120VAC 70A / 15A / 30A / 35A 300A / 25.25 15.62 14.75 49.50 lbs. 2 Years

Image Shown: PSW-7700

MFG Part Number CBC PSW-7700

Description 15/30/70/300A 6/12/24V Wheel Charger

MFG Part Number CBC PSW-70300A

Description 4/20/40/70/300A 12V Microprocessor Controlled ProSeries Wheel Charger

10/50/125/250A 6/12V Manual ProSeries Wheel Charger w/Engine Start 250 / 125 / 50 / 10 Amps 2-1/4 hour timer Oversized selector switchesCharger Type Output Voltage Input Voltage Output Current Cont Output Engine Start Unit Height Unit Width Unit Depth Unit Weight Warranty Period Manual Operation 6VDC / 3.6VDC / 12VDC / 7.2VDC 120VAC 50A / / 10A / 125A / 250A 19.00 11.70 11.87 36.90 lbs. 3 Years Image Shown: PSW-2550

Charges 6 and 12 volt batteries Convenient clamp holder and rubber grip Extra long 9 foot AC line cord


Description 10/50/125/250A 6/12V Manual ProSeries Wheel Charger w/Engine Start

C10


Technicians ToolsBattery Chargers

250/150A 6/12/24V Manual ProSeries Wheel Charger w/Engine Start Charges 6, 12 and 24 volt batteries 80/40 amp rates for 6 volt battery systems 60/35/1.5 amp rates for 12 volt battery systems 30/10 amp rates for 24 volt battery systems 2-1/4 Hour Timer Convenient clamp holder and rubber grip Oversized selector switches Extra long 9 foot AC line cordCharger Type Output Voltage Input Voltage Output Current Cont Output Engine Start Unit Height Unit Width Unit Depth Unit Weight Warranty Period Manual Operation 24VDC / 6VDC / 12VDC 120VAC 40A / 80A / 1.5A / 35A / 10A / 30A 150A / / 250A 19.00 11.70 11.87 30.20 lbs. 3 Years

10/40/200A 6/12V Manual Wheel Charger w/Engine StartOur most popular wheel charger. Designed for D-I-Yers or professional mechanics. Manual operation puts user in control. High-output engine start assists batteries in cranking most engines under severe conditions. For 6 and 12 volt batteries. Fan cooled 200 Amp 12 Volt/100 Amp 6 Volt engine start for emergency starting 40 Amp fast charge charges in 1/2 to 1 hour 10 Amp medium charge for everyday charging needs. Charges in 3 to 5 hours 2 Amp, 12 Volt Slow/Trickle Charge Rate for small batteries also maintains batteries 2 rotary switches for ease-of-use and accuracy Hold position on timer switch for continuous charging UL Rating: 10 amp and 40 amp continuous, 200 amp start Discharge Rating: 12/50 ampCharger Type Output Voltage Input Voltage Output Current Cont Output Engine Start Unit Height Unit Width Unit Depth Unit Weight Warranty Period Manual Operation 6VDC / 12VDC / 7.2V 120VAC / 120V 10A / 40A / 200A 19.00 11.70 9.87 27.30 lbs. 3 Years

Image Shown: PSW-61224


Description 250/150A 6/12/24V Manual ProSeries Wheel Charger w/Engine Start

MFG Part Number CBC SF-4020

Description 10/40/200A 6/12V Manual Wheel Charger w/Engine Start

2/10/40/200A 6/12V Manual Wheel ChargerThis charger gives fleet operations, D-I-Yers and professionals a wide range of charging rates, an engine start rate and the ability to analyze electrical and starting system problems. For 6 and 12 volt batteries. Fan cooled 200 Amp 12 volt/100 Amp 6 Volt engine start for emergency starting 40 amp rapid charge charges in 1/2 to 1 hour 10 Amp fast charge for everyday charging needs. Charges in 3 to 5 hours 2 Amp trickle charge charges a small 12 volt battery in 2 to 12 hours Multifunction tester Two rotary switches Hold position on timer switch for continuous charging Voltmeter for battery testing UL Rating: 2/10 Amp and 40 Amp continuous, 200 Amp start. Discharge Rating: 3/12/50 AmpCharger Type Output Voltage Input Voltage Output Current Cont Output Engine Start Manual Operation 6VDC / 12VDC / 7.2V 120VAC / 120VAC 40A / 2A / 10A / 100A / 200A Unit Height Unit Width Unit Depth Unit Weight Warranty Period 19.00 11.70 9.87 27.30 lbs. 3 Years

Image Shown: SE-4022

MFG Part Number CBC SE-4022

Description 2/10/40/200A 6/12V Manual Wheel Charger


C11


2/35/200A 12V Manual Wheel Charger w/Engine StartDesigned for economy-minded do-it-yourselfers, professional mechanics and fleet operations. Use for both slow and fast charge applications. High-output engine start will assist batteries in cranking most engines under severe summer/winter weather conditions. For 12 volt batteries 200 amp engine start for emergency starting 35 amp rapid charge charges in 1 to 1-1/2 hours 2 amp trickle charge charges a small 12 volt battery in 2 to 12 hours Off position on switchCharger Type Output Voltage Input Voltage Output Current Cont Output Engine Start Unit Height Unit Width Unit Depth Unit Weight Warranty Period Manual Operation 12VDC 120VAC 2A / 35A 200A 19.00 11.70 9.87 27.25 lbs. 3 Years

2/10/20/80A 12V Automatic SpeedCharge Hybrid Charger w/Engine Start Fully automatic microprocessor controlled. 80 Amp Engine start for emergency starting. 10 - 20 Amp fast charge self-adjusting, variable charge rates for everyday charging needs and maintaining your battery in peak condition. Charges and automatically desulfates and restores car, truck, RV, farm equipment, AGM, gel cell and deep-cycle batteries. 2 Amp Slow Charge for charging and maintaining small batteries; charges motorcycle, ATV, snowmobile and lawn tractor batteries. 125 Amp, Sure-Grip Clamps for top and side-mounted battery posts. Electronic Touch-Pad Controls easy-to-select switches for Digital Display, Battery Type or Charge/Start. Choose from 12V regular automotive, 12V deep-cycle, 12V AGM or gel cell batteries. Built-in Digital Voltmeter/Tester helps diagnose problems. Retractable Handle for easy portability. Cord wrap on back.Charger Type Output Voltage Input Voltage Output Current Cont Output Current Int Output Engine Start Unit Height Unit Width Unit Depth Unit Weight Fully Automatic Microprocessor Controlled 12 VDC 120 VAC 2A 10A-20A 80A 5.37 9.80 9.00 11.43 lbs.

Image Shown: SE-2352

MFG Part Number CBC SE-2352

Description 2/35/200A 12V Manual Wheel Charger w/ Engine Start

MFG Part Number CBC SC-8020A

Description 2/10/20/80A 12V Automatic SpeedCharge Hybrid Charger w/Engine Start

2/12/75A 12V Automatic Traditional Battery ChargerA perfect choice for 12 Volt and deep-cycle batteries. This starter/charger is fully automatic. Plus, many more important features... 75 Amp engine start for emergency starting 12 Amp fast charge charges a battery in 2 to 5 hours 2 Amp trickle charge charges a small 12 volt battery in 2 to 12 hours 2 LED lights signal power on and fully charged Fully automatic will not overcharge batteriesCharger Type Output Voltage Input Voltage Output Current Cont Output Engine Start Fully Automatic 12 VDC 120 VAC 2A / 12A 75A Unit Height Unit Width Unit Depth Unit Weight Warranty Period 5.25 10.50 8.50 12.40 lbs. 2 Years

Image Shown: SF-1275A

MFG Part Number CBC SF-1275A

Description 2/12/75A 12V Automatic Traditional Battery Charger

C12



2/6A 6/12V Manual Traditional ChargerSchumachers best selling charger. Designed for the economy-minded user. Two charging rates. Charges both 6 and 12 Volt batteries. Great for antique cars. 6 Amp medium charge rate for most everyday needs. Charges in 6 to 8 hours 2 Amp trickle charge charges a small 12 Volt battery in 2 to 12 hoursCharger Type Output Voltage Input Voltage Output Current Cont Input Current Cont Unit Height Unit Width Unit Depth Unit Weight Warranty Period Manual Operation 12 VDC / 6VDC 120 VAC 2A / 6A 1.3A 4.25 8.50 7.00 5.70 lbs. 2 Years

1.5A 6/12V Automatic Microprocessor Controlled Charger/MaintainerUnique automatic battery charger maintains both 6 and 12 Volt batteries keeping them at full charge using float-mode monitoring. Perfect for charging small batteries. Great for maintaining small and large batteries kept in storage motorcycles, classic cars, RVs, boats 1.5 Amp charger and maintainer LEDs indicate: charging, charged and trouble Automatically switches from full charge to float-mode monitoring. Quick-Disconnect Harness Snap either connector into place in seconds Use the 50 Amp clamps or permanently attach the ring connectorsgreat for hard-to-reach motorcycle batteries. Reverse-hookup protection Designed for use on AGM and standard lead acid batteries.Charger Type Output Voltage Input Voltage Output Current Cont Warranty Period Fully Automatic Microprocessor Controlled 6 VDC / 12 VDC 120 VAC 1.5A 2 Years

MFG Part Number CBC SF-82-6

Description 2/6A 6/12V Manual Traditional Charger

MFG Part Number CBC SFM-1562A

Description 1.5A 6/12V Automatic Microprocessor Controlled Charger/Maintainer

2/4/6A 6/12V Automatic SpeedCharge Charger 6 Amp Fast Charge charger monitors battery condition and adjusts charge rate downward to prevent battery damage; for car, small truck, motorcycle, lawn tractor lead-acid and AGM batteries 4 Amp Medium Charge self-adjusting charge rate ideal for everyday charging needs and keeping your battery in peak condition 2 Amp slow charge for charging and maintaining small batteries Charges motorcycle, ATV, snowmobile and lawn tractor batteries 6 volt for antique cars and small farm tractor batteries 50 Amp clamps for top and side-mounted battery posts Electronic push button controls easy-to-feel switches for selection of charge rate or battery type. Choose between 6 or 12 Volt batteries Sturdy, built-in handle serves as convenient cord wrap and for easy portabilityCharger Type Output Voltage Input Voltage Output Current Cont Accessory Unit Height Unit Width Unit Depth Unit Weight Warranty Period Fully Automatic Microprocessor Controlled 6 V / 12 VDC 120 VAC 2A / 4A / 6A N/A 6.89 2.95 7.48 2.08 lbs. 5 Years

1.5A 12V Automatic Trickle Battery Charger/MaintainerKeeps 12 volt batteries charged. Fully automatic. Turns on and off as needed. Allows safe charging of RV, deep-cycle or most batteries that may have a long storage period. Onboard feature allows mounting of charger next to battery on collectibles, street rods and other infrequently used vehicles. Hardware and mounting brackets are included. 1.5 Amp trickle charge rate charges in 2 to 12 hours LED lights indicate Power On and Charged Reverse-hookup protection Molded plastic case Short leads for safety wont get tangled in moving engine partsCharger Type Output Voltage Input Voltage Output Current Cont Input Current Cont. Unit Height Unit Width Unit Depth Unit Weight Warranty Period Fully Automatic 12 VDC 120 VAC 1.5A 0.4A 3.88 8.88 8.25 5.00 lbs. 2 Years

MFG Part Number CBC SE-1-12S

MFG Part Number Description CBC SC-600A 2/4/6A 6/12V Automatic SpeedCharge Charger

Description 1.5A 12V Automatic Trickle Battery Charger/Maintainer


C13


Memory Saver On-board diagnostics connector (OBDII) plugs directly into the vehicles OBDII port. Preserves the stored fault codes and programmed electronic settings such as clocks, radios, seat positions, keyless entry systems, alarms, etc. Convenient 12 volt DC male-to-male cable for quickly charging the internal battery on the go. 7 amp hour battery Easy to read battery status LED indicators tell when the internal battery is at full power, 75% charged or 50% or less and needs charging. Built-in charger for convenient charging of the internal battery Charging and charged LED indicators show the charging status of the internal battery. Lightweight and easily transportable weighs less than 8 lbs. Description Memory Saver

Powermate 60-Gallon Medium-Duty Air Compressor Cast Iron Twin Cylinder Belt Drive Oil Lubricated Oil Level Sight Glass ASME Certified TanksSize CFM 60 Gallon 13.4 cfm @ 40 psi 11.5 cfm @ 90 psi 155 psi 3.7 hp 240V 2 Year Limited

MFG Part Number CBC INC-7A-OBD

Image Shown: PLA3706056

Power Supply to Vehicle Memory Saver Cable 6 foot long cable assembly Plugs an external power source into the vehicles OBDII port Preserves the stored fault codes and programmed electronic settings such as clocks, radios, seat positions, keyless entry systems, alarms, etc. Lightweight and easily transportable

Maximum Pressure Horsepower Voltage Warranty

MFG COMImage Shown: INC-12V-OBD

Part Number PLA3706056

Description Powermate 60-Gallon Medium-Duty Air Compressor

MFG Part Number CBC INC-12V-OBD

Description Power Supply to Vehicle Memory Saver Cable

Powermate 20-Gallon MediumDuty Air Compressor Cast Iron Twin Cylinder Belt Drive Oil Lubricated Oil Level Sight Glass ASME Certified TanksSize CFM Maximum Pressure Horsepower Voltage Warranty 20 Gallon 6.2 cfm @ 40 psi 5.3 cfm @ 90 psi 135 psi 1.6 hp 120/240V 1 Year Limited

Powermate 30-Gallon Medium-Duty Air Compressor Cast Iron Twin Cylinder Belt Drive Oil Lubricated Oil Level Sight Glass ASME Certified TanksSize CFM Maximum Pressure Horsepower Voltage Warranty 30 Gallon 6.2 cfm @ 40 psi 5.3 cfm @ 90 psi 155 psi 1.6 hp 120/240V 2 Year Limited

Image Shown: PP1682066

Image Shown: PLA1683066

MFG COM

Part Number PP1682066


MFG COM

Part Number PLA1683066


C14


Technicians ToolsComputer Diagnostic Tools - Air Compressors - Lt & Med Duty

Powermate 7-Gallon Light-Duty Air Compressor Oil Free, Low Maintenance Operation 120 Volt UL & CSA Certification ASME Certified Tanks Great for Home & DIY Projects! Air Pressure Regulator, Gauges & Quick-ConnectSize CFM Maximum Pressure Horsepower Voltage Image Shown: PL1582019 Warranty 7 Gallon 5.0 cfm @ 40 psi / 4.0 cfm @ 90 psi 125 psi 1.5 hp 120V 1 Year Limited

Powermate 20-Gallon Light-Duty Air Compressor Oil Free, Low Maintenance Operation 120 Volt UL & CSA Certification ASME Certified Tanks Great for Home & DIY Projects! Air Pressure Regulator, Gauges & Quick-ConnectSize CFM Maximum Pressure Horsepower Voltage Warranty 20 Gallons 5 cfm @ 40 psi / 4 cfm @ 90 psi 125 psi 1.5 hp 120V 1 Year Limited

Image Shown: VPP1580719

MFG Part Number COM VPP1580719

Description Powermate 7-Gallon Light-Duty Air Compressor

MFG COM

Part Number PL1582019


Powermate 3-Gallon Light-Duty Air Compressor Oil Free, Low Maintenance Operation 120 Volt UL & CSA Certification ASME Certified Tanks Great for Home & DIY Projects! Air Pressure Regulator, Gauges & Quick-ConnectSize CFM Maximum Pressure Horsepower Voltage Warranty 3 Gallon 3.0 cfm @ 40 psi / 2.0 cfm @ 90 psi 125 psi 1 hp 120V 1 Year Limited

Image Shown: VPP1080318

Powermate 10-Gallon Light-Duty Air Compressor Oil Free, Low Maintenance Operation 120 Volt UL & CSA Certification ASME Certified Tanks Great for Home & DIY Projects! Air Pressure Regulator, Gauges & Quick-ConnectSize CFM Maximum Pressure Horsepower Voltage Warranty 10 Gallon 5.0 cfm @ 40 psi / 4.0 cfm @ 90 psi 125 psi 1.5 hp 120V 1 Year Limited

MFG COM

Part Number VPP1080318


Image Shown: VLP1581019

Powermate 2-Gallon Light-Duty Air Compressor Oil Free, Low Maintenance Operation 120 Volt UL & CSA Certification ASME Certified Tanks Great for Home & DIY Projects! Air Pressure Regulator, Gauges & Quick-ConnectSize CFM Voltage Warranty 2 Gallon 100 psi 120V 1 Year Limited

Image Shown: VPP0000201.02

MFG Part Number COM VLP1581019

Description Powermate 10-Gallon Light-Duty Air Compressor MFG COM

Part Number Description VPP0000201.02 Powermate 2-Gallon Light-Duty Air Compressor


C15

Technicians ToolsAir Compressors - Lt & Med Duty

Pressure Gauge Vertical Air TankComes complete with a manifold, gauge, 3 hose and a ball chuck with 125 psi working pressure. The manifold has a preset safety relief valve to prevent over filling, as well as a manual shut-off to prevent air loss. 11 gallon tank. Not for sale in New Jersey or Puerto Rico. MFG Part Number CPE 97011 Pressure gauge features an impact-resistant casing with a clear plastic face. Has a 1/8 NPT fitting and 1-1/2 dial that is easy to read (0-160 psi). MFG Part Number CPE 31501Image Shown: 97011

Image Shown: 31501

Description Pressure Gauge

Description 11 Gallon Vertical Air Tank

Lincoln All-Steel Air Hose Reel Portable Air TankPerfect for filling tires and sports equipment. Light-weight, portable tank with handle for easy transport. Connects to standard compressed air source. Industrial grade air hose with standard tire air chuck. Safety pressure bypass valve withmanual override. 125 psi maximum. Durable construction with MIG welding. MFG Part Number CPE 97018 All steel construction. Spring-powered automatic recoil. Adjustable outlet arm. 8-Position ratchet gearing locks the reel at the desired hose length. Heavy-duty rubber hoses. Ball stop included.

Image Shown: 83753

MFG Part Number LIN 83753Image Shown: 97018

Description Lincoln All-Steel Air Hose Reel, 50 x 3/8 Lincoln All-Steel Air Hose Reel, 50 x 1/2

LIN

83754

Description 5 Gallon Portable Air Tank

Air Hose ReelAll steel constructed 3/8 high quality hose reel for air and water. It features a max pressure of 300 psi with a metal spring guide. The CARQUEST model 7470 hose reel is ideal for use in commercial or industrial work places. The automatic retracting spring coil allows for a smooth consistent speed, it does not accelerate. This unit has a 20,000 cycle guarantee handling both air and water. MFG Part Number EQP 7470 Description Air Hose Reel

Air Tank Repair KitFor quick repair of your portable air tank. Includes 1/2 tank mount brass manifold, 1/8 NPT air gauge and 1/4 NPT air hose with ball chuck. MFG Part Number CPE 31503 Description Air Tank Repair Kit

Image Shown: 31503

Image Shown: 7470

Brass Air ManifoldThis quality factory replacement fits a standard 1/2 NPT tank mount. Fitted with 1/4 female NPT threads for hose and has a preset safety relief valve as well as a manual shut off to prevent air loss. MFG Part Number CPE 31500 Description Brass Air Manifold

Image Shown: 31500

Nitrogen 3/8 Air Hose ReelThis retractable air hose reel is ideal for the home shop. Comes equipped with a green PVC hose to distinguish it from other air and water reels in the work area and is designed to be used with nitrogen tire inflation systems. 30 retractable Nitrogen hose reel. Includes a 3 lead-in hose and a wall mounting bracket. MFG Part Number CPE 39665

Air Hose with Ball ChuckIndustrial quality grade grease resistant air hose that fits 1/4 NPT. 3 length. MFG Part Number CPE 31502 Description Air Hose with Ball ChuckImage Shown: 31502

Image Shown: 39665

Description Nitrogen 3/8 Air Hose Reel

C16


Technicians ToolsTire Inflation Tools

Flexzilla 3/8 Air HoseExtreme flexibility. Lightweight and easy to handle. Excellent abrasion resistant outer cover. Made from an engineered hybrid polymer, FLEXZILLA provides superior all-weather flexibility, even in freezing temperatures. Reinforced bend restrictor.

Heavy-Duty Rubber Air HoseDesigned for service station and shop applications. It features a twospiral construction with a polyester reinforcement that provides excellent durability and is extremely flexible. The limited oil resistant EPDM tube and cover offers superior resistance to abrasion and weathering. This hose is designed for a working pressure of 200 psi and is made in the USA. MFG Part Number CPE 31675 CPE CPE CPE 31676 31677 31678

Image Shown: 39664

MFG Part Number Description CPE 39664 Flexzilla Air Hose, 50, 3/8 ID, 1/4 Male NPT CPE 39666 Flexzilla Air Hose, 50, 1/2 ID, 3/8 Male NPT

Image Shown: 31675

Description Heavy-Duty Rubber Air Hose, 25, 1/4 ID, 1/4 Male NPT Heavy-Duty Rubber Air Hose, 50, 1/4 ID, 1/4 Male NPT Heavy-Duty Rubber Air Hose, 25, 3/8 ID, 1/4 Male NPT Heavy-Duty Rubber Air Hose, 50, 3/8 ID, 1/4 Male NPT

Professional Rubber Air HoseDesigned for tough service station and shop applications with impact air tools. This hose features heavy-duty, four-spiral construction with a polyester reinforcement that keeps the hose flexible in the most punishing conditions. The EPDM rubber construction offers superior durability to resist abrasion and weathering. This limited oil resistant hose is designed for a working pressure of 250 psi and is made in the USA. MFG Part Number CPE 31660 CPE CPE CPE CPE CPE 31661 31662 31663 31664 31665

Image Shown: 31660

Heavy-Duty PVC Air HoseFeatures 1/4 male NPT coupler with all brass fittings. 4:1 safety factor. Temperature range is 0F to 150F. Bend restrictor included. Working pressure approximately 350 psi. MFG Part Number CPE 31640 CPE CPE CPE 31641 31645 31646

Description Professional Rubber Air Hose, 25, 1/4 ID, 1/4 Male NPT Professional Rubber Air Hose, 50, 1/4 ID, 1/4 Male NPT Professional Rubber Air Hose, 25, 3/8 ID, 1/4 Male NPT Professional Rubber Air Hose, 50, 3/8 ID, 1/4 Male NPT Professional Rubber Air Hose, 25, 1/2 ID, 1/2 Male NPT Professional Rubber Air Hose, 50, 1/2 ID, 1/2 Male NPT

Image Shown: 31640

Description Heavy-Duty PVC Air Hose, 25, 1/4 ID, 1/4 Male NPT Heavy-Duty PVC Air Hose, 50, 1/4 ID, 1/4 Male NPT Heavy-Duty PVC Air Hose, 25, 3/8 ID, 1/4 Male NPT Heavy-Duty PVC Air Hose, 50, 3/8 ID, 1/4 Male NPT

Flexible Polyurethane Air HosePolyurethane flexible pneumatic hose was developed to eliminate the two most common limitations of nylon air hoses: kinking and abrasion resistance. This lightweight, yet extremely durable 25 hose will withstand the rigors of just about any environment while maintaining its resiliency over a long period of time. Factory applied thread sealant on male swivel fittings. 8 supply and 16 working end pigtails. Working pressure is approximately 145 psi. 1/4 inside diameter. 1/4 male NPT. MFG Part Number CPE 31550 Description Flexible Polyurethane Air Hose

Image Shown: 31550


C17

Technicians ToolsAir Hoses & Reel Assemblies

Nylon Recoil HoseThis lightweight, permanently coiled hose is manufactured from tough, abrasion resistant nylon and designed to withstand temperatures between -60F and +180F. Each is supplied with durable brass compression fittings, tube inserts, hose ferrules and spring guards for additional strain relief. Applications include: air ratchets, all auto repair, machine shops, mobile equipment, impact wrenches, air brushing and much more. MFG Part Number CPE 31560 CPE CPE CPE CPE CPE CPE 31561 31562 31565 31566 31570 31571

Blow Gun w/ 4 Threaded EndBlow gun with a 4 threaded tip. It has a maximum working pressure of 150 psi and operates at a recommended air pressure of 90 psi. The gun is made of a heavy-duty plastic resin. MFG Part Number CPE 31512Image Shown: 31560

Image Shown: 31512

Description Blow Gun w/ 4 Threaded End

Description Nylon Recoil Hose, 12, 1/4 ID, 1/4 Male NPT Nylon Recoil Hose, 25, 1/4 ID, 1/4 Male NPT Nylon Recoil Hose, 50, 1/4 ID, 1/4 Male NPT Nylon Recoil Hose, 25, 3/8 ID, 1/4 Male NPT Nylon Recoil Hose, 50, 3/8 ID, 1/4 Male NPT Nylon Recoil Hose, 25, 3/8 ID, 3/8 Male NPT Nylon Recoil Hose, 50, 3/8 ID, 3/8 Male NPT

Safety Blow GunChuck style. Convenient 8-1/2 spout length. Rugged epoxy finish. Converts standard ball foot tire chuck into a Safety Blow Gun. Vented noz.zle limits noz.zle pressure to maximum of 30 psi with up to 150 psi inlet pressure. Conforms to OSHA regulation No. 1001. MFG Part Number CPE 31510 Description Safety Blow Gun

Image Shown: 31510

Repair KitsContains all components needed to repair one swivel hose end of 1/4 nylon or polyurethane hoses. 1/4 inside diameter. 1/4 NPT. MFG Part Number CPE 31580 CPE 31585 Description Repair Kit, Nylon Repair Kit, Polyurethane

Image Shown: 31580

ProValue 1/4 Stubby Ratchet WrenchLoosen or tighten bolts where other tools cannot reach. Has ball detent in square drive to hold sockets securely. Built-in power regulator. Square handle provides firm grip. Can also be used manually. 18 ft-lb of torque and no-load speed of 250 rpm. Lever throttle with full reverse. Teasing throttle for precise speed control. Steel air inlet to prevent crossthreading for quick disconnect coupling. 3 planetary gear system for high torque ratcheting.Square Drive Speed Maximum Torque Length Average Air Consumption Air Pressure Hose Size Air Inlet Minimum Recommended Compressor Minimum Recommended Tank Size 1/4 250 rpm 18 ft-lb 7-1/2 2.5 cfm 90 psi 3/8 ID 1/4 NPT 2 Hp 15 gal

Blow Gun KitThis unique 8 piece blow gun kit includes a blow gun with a 4 threaded tip. It has a maximum working pressure of 150 psi and operates at a recommended air pressure of 90 psi. The gun is made of a heavy-duty plastic resin. The kit comes in an impact resistant plastic storage case and includes seven useful accessories (31512, 31513, 31514, 3515, 31516, 31517, 31518, 31519.) The kit also includes a slot for storage of a tire pressure gauge. MFG Part Number CPE 31511 CPE CPE CPE CPE CPE CPE CPE 31513 31514 31515 31516 31517 31518 31519 Description Blow Gun Kit Rubber Blow Tip Shield Side Flow Air Tip Ball Needle Adapter 16 Threaded Straight Extension Tube Side Flow Air Tip Tire Inflation Adapter Star Tip

Image Shown: 2329-PV

MFG Part Number EQP 2329-PV

Description ProValue 1/4 Stubby Ratchet Wrench

C18


Technicians ToolsAir Hoses & Reel Assemblies - Pneumatic Power Tools

CARQUEST 1/4 Super-Duty Composite Stubby Ratchet Wrench ProValue 3/8 Air Ratchet WrenchErgonomic square handle design for positive comfort grip. Teasing throttle for precise speed control. Efficient 1/2 Hp motor is ideal for exhaust systems, small engines, water pumps, fuel pumps, radiators, etc.Free Speed Air Pressure Hose Size Air Inlet Square Drive Maximum Torque Maximum Hand Torque Bolt Capacity Average Air Consumption Minimum Recommended Compressor 160 rpm 90 psi 3/8 ID 1/4 NPT 3.8 60 ft-lb 150 ft-lb 1.2 2 cfm 2 Hp


High speed designed for assembly and dis-assembly of bolts and nuts in confined areas. It features a revolutionary dust free ratchet housing to keep dirt and other objects away from the yoke. The ergonomically enhanced composite handle grip has a professional and superior touch. The built-in power regulator allows operator adjustment for desired torques levels and a 360 adjustable rear exhaust to direct air away from work piece.Square Drive Free Speed Air Inlet Hose Size Overall Length Net Weight Maximum Torque Maximum Ratchet Torque 1/4 250 rpm 1/4 NPT 3/8 ID 8-1/16 1.45 lbs. 20 ft-lb 40 ft-lb

Image Shown: 7420


Description ProValue 3/8 Air Ratchet Wrench

MFG Part Number EQP 7420

Description CARQUEST 1/4 Super-Duty Composite Stubby Ratchet Wrench

ProValue 3/8 Butterfly Impact Wrench3/8 drive butterfly impact with a built-in dial regulator and swivel inlet. Features a durable rocking dog clutch and instant forward and reverse throttle speed.Free Speed Air Pressure Hose Size Air Inlet Square Drive Maximum Torque Working Torque Bolt Capacity Average Air Consumption Minimum Recommended Compressor 11,000 rpm 90 psi 3/8 ID 1/4 NPT 3/8 75 ft-lb 10 - 50 ft-lb 3/8 3 cfm 2 Hp


1/4 Mini Ratchet WrenchSmall, lightweight, fast and powerful, this mini ratchet is ideal for the hard to get places under the dash board, lawn mower repair, RVs, appliances, etc. Has a comfortable sure grip handle.Square Drive Maximum Torque Speed Overall Length Total Weight Hose Size 1/4 30 ft-lb 230 rpm 6.5 1.1 lbs. 3/8 ID

Image Shown: 7426


Description ProValue 3/8 Butterfly Impact Wrench


Description CARQUEST 1/4 Mini Ratchet Wrench


C19

Technicians ToolsPneumatic Power Tools

3/8 Super-Duty Composite Ratchet WrenchSlightly longer than the standard 3/8 ratchet, but with approximately 40% more speed, 40% more power and all in a composite ergonomically designed tool for the future. This tool has a revolutionary designed ratchet head for longer life, 360 adjustable exhaust deflector and a 360 air inlet to allow the air hose to rotate freely.Square Drive Bolt Capacity Free Speed 1/360 Degree Rotating Air Inlet Air Hose Size Overall Length Net Weight Maximum Torque Maximum Ratchet Torque 3/8 1/2 225 rpm 1/4 3/8 ID 12-5/8 3.54 lbs. 80 ft-lb 90 ft-lb

Chicago Pneumatic 3/8 Super-Duty Quiet RatchetAdjustable exhaust, sound level as low as 79 dBA Highest torque on the market: 90 ft-lb Rubber handle grip Features CPs patented TriSpring Lightweight and well balanced tool Durability and comfort Ratchet head protectionOutput Drive Free Speed Torque Range Min Torque Range Max Average Air Consumption Air Consumption at Load Overall Length Weight Air Inlet 3/8 190 rpm 10 ft-lb 90 ft-lb 5.0 cfm 21 cfm 12 2.7 lbs. 1/4 NPTF

Image Shown: 7421

Image Shown: CP7830Q


Description CARQUEST 3/8 Super-Duty Composite Ratchet Wrench

MFG Part Number CP CP7830Q

Description Chicago Pneumatic 3/8 Super-Duty Quiet Ratchet

CARQUEST 3/8 Heavy-Duty Ratchet WrenchThe most power, all metal ratchet wrench you can buy. The CARQUEST model 7419 produces up to 60 ft-lb of torque with more room for final ratcheting. Its sure grip handle, 360 adjustable exhaust deflector, and lever throttle makes this one of the most comfortable tools

Documents

Section C-Technicians Tools of CARQUEST Service Line Catalogue