Sealey Tools - Part 2)

Section 7Lubrication359 Grease Guns361 Bulk Grease Equipment362 Oil Drainers364 Oil & Fluid Drainers366 Fluid Transfer Pumps369 Oil Dispensing Systems370 Diesel & Fluid Tranfer Pumps372 Drain Pans, Drum Handling & Water Containers375 Barrel Bunds376 Measuring Jugs377 Funnels378 Fuel Transfer Equipment379 Oil Spill & Waste Management380 Fuel & Jerry Cans

Side Lever Grease Gun3-Way Fill

Pump-head with air-bleed valve. 3-W ay fill withcartridge, bulk or manual capability. Supplied with rigidextension tube and push-on hydraulic 4-jaw coupling.Contoured pump handle. Accepts standard 400gcartridges.Capacity: 500cm³Delivery Pressure: 5000psiDelivery per Stoke: 1.2cm³Optional 300mm Flexible Extension Tube: AK44/FT

AModel No. AK445

A

Side Lever Grease Gun3-Way Fill

Die-cast pump head. 3-Way fill with cartridge, bulk ormanual capability. Supplied with rigid extension tubeand push-on hydraulic 4-jaw coupling. Contouredpump handle. Accepts standard 400g cartridges.Capacity: 500cm³Delivery Pressure: 6000psiDelivery per Stroke: 1.3cm³Optional 300mm Flexible Extension Tube: AK44/FT

BModel No. AK443

B

Side Lever Grease Gun3-Way Fill Heavy-Duty

Die-cast pump head with air-bleed valve. 3-W ay fillwith cartridge, bulk or manual capability. Supplied withrigid extension tube and push-on hydraulic 4-jawcoupling. Contoured pump handle. Accepts standard400g cartridges.Capacity: 500cm³Delivery Pressure: 10000psiDelivery per Stroke: 1.2cm³Optional 300mm Flexible Extension Tube: AK44/FT

CModel No. AK44

C

Pistol Type Grease Gun3-Way Fill

Die-cast pump head with air-bleed valve. 3-W ay fillwith cartridge, bulk or manual capability. Supplied withrigid extension tube and push-on hydraulic 4-jawcoupling. Can be used as pistol or straight type greasegun. Accepts standard 400g cartridges.Capacity: 500cm³Delivery Pressure: 4500psiDelivery per Stroke: 1.25cm³Optional 300mm Flexible Extension Tube: AK44/FT

GModel No. AK446

G

Pistol Type Grease Gun1-Way Fill

Die-cast pump head with twist type air-bleed. One-wayfill with bulk capability. Can be used as pistol or straighttype grease gun. Supplied with flexible extension tubeand push-on hydraulic 4-jaw coupling.Capacity: 125cm³Delivery Pressure: 2500psiDelivery per Stroke: 0.5cm³Optional 300mm Flexible Extension Tube: AK44/FT

EModel No. AK444

E

Mini Grease Gun

Mini push action hand greaser. Ideal for limited accessareas or where smaller amounts of grease arerequired. Rigid extension tube and delivery nozzle.Capacity: 125cm³Delivery Pressure: 1000psiDelivery per Stroke: 0.9cm³Overall Length: 270mm

DModel No. AK442

D

Cordless Grease Gun 12V

High power , professional cordless grease gun,developing 6000psi. Ideal for in-field lubrication wherepower and speed are required. Suitable for 400gcartridges, manual or bulk filling. Features air bleedand heavy-duty aluminium pressure head. Suppliedwith 12V 1.7Ah battery , mains charger and in-caradaptor. Supplied in carry-case.Voltage: 12VDelivery Pressure: 6000psiHose Length: 700mmReplacement Battery: CPG12VBPIn-Car Power Adaptor: CPG12VICA

HModel No. CPG12V

H

12V

Rechargeable

Side Lever Mini Grease Gun1-Way Fill

Die-cast pump head. One-way fill with bulk capacity .Supplied with rigid extension tube and push-onhydraulic 4-jaw coupling.Capacity: 120cm³Delivery Pressure: 2500psiDelivery per Stroke: 0.5cm³

FModel No. New AK4401

F

Section 7 Grease Guns 359

A

Needle Nose Grease Accessory

For use with all leading brands of manual grease gun -not power greasers. Dispenses fine bead of grease.Long nozzle gives access to hard to reach areas. Idealfor lubricating constant velocity joints.Overall Length: 170mm

EModel No. AK447

E

C

Grease Gun Adaptor Kit 7pc

Kit consists of adaptors and extensions to make almostany lubricating job easy. For use with all leading brandsof manual grease guns. Supplied in carry-case.

Contents: Nozzles; 90° Push-on, Rubber Tipped,Needle Nose, 90° Slide-on, 360°, Straight Extended,Extension Hose; 305mm

CModel No. AK4481

Locking Drum Tap

Polythene constructed tap with 3/4”BSP thread andneoprene washer.

HModel No. TP12

Locking Zinc Die-Cast Drum Tap

Zinc die-cast, push-pull tap with locking facility toprevent unauthorised access to drum contents. Nitrileseals, suitable for most liquids normally stored inplastic and steel drums. 3/4”BSP Thread.

IModel No. TP121

H I

Oil Suction Syringe

Chromed steel suction tube with T-Bar type plunger.Particularly useful for removal of oil from gearboxesand differentials. Supplied with 200mm flexible suctionhose.

Capacity: 500ml

FModel No. AK46

F

Air Operated Pistol TypeContinuous Flow Grease Gun

Die-cast head and body with chromed steel greasetube. Includes rigid extension tube and 4-jaw coupler.Trigger operated continuous flow gun with 3-way filland air-bleed valve. Accepts 400g grease cartridges,bulk or manual fill.Operating Pressure: 30-150psiDelivery Pressure: 1200-4500psiAir Inlet: 1/4”BSPOptional 230mm FlexibleExtension Tube: SA40/09A

BModel No. New SA401

B

Drum Wrench

Universal wrench suitable for opening a variety ofdrums. Made from a tough composite material.

DModel No. New TP122

D

E

Air Operated Pistol TypeGrease Gun

Die-cast head and body with chromed steel greasetube. Includes rigid extension tube and 4-jaw coupler.Trigger operated single impulse gun with 3-way fill andair-bleed valve. Accepts 400g grease cartridges, bulkor manual fill.Operating Pressure: 30-150psiDelivery Pressure: 1200-6000psiAir Inlet: 1/4”BSPOptional 230mm FlexibleExtension Tube: SA40/09A

AModel No. SA40

Spill Kit Maintenance Pack55ltr

Designed to absorb spills and drips with a maximumcapacity of up to fifty-five litres. Including a range ofhigh absorbency pads, mats and containing seals withtwo disposable bags and one pair of gloves. Kitproviding quick and easy access for clearing largerspills and can be easily stored away. Suitable for oils,diesel, petrol, cutting fluids, coolants, mild solvent,turpentine, acetone, MEK, trichloroethylene and water.Supplied in a durable, zipped carry-case.See page 379 for full details.

GModel No. GPSK55

G SPILL KITMAXIMUMCAPACITY

55ltr

CONTINUOUSFLOW

Section 7 Grease Guns360

Direct High Pressure ManualGrease Unit 12.5kg

Zinc die-cast pump head with pressed steel pump andcarry handle. Suitable for 12.5kg and some 20kg greasebuckets. Supplied with follower plate to prevent cavitationand ensure smooth flow of grease. Suitable for bulkpacking bushings and bearings where requirement is forgrease volume and not grease pressure. Includes rigidextensions and 4-jaw coupler.Delivery Pressure: 2880psiDelivery per Stroke: 3.8cm³Hose Length: 1500mm

AModel No. AK45X

A

Heavy-Duty Direct High PressureManual Grease Unit 12.5kg

Solid steel pump and carry handle. Supplied withfollower plate to prevent cavitation and ensure smoothflow of grease. Suitable for repetitive filling of highpressure low volume grease. Suitable for 12.5kggrease buckets. Includes rigid extension and 4-jawcoupler.Delivery Pressure: 5000-7000psiDelivery per Stroke: 1.5cm³Hose Length: 1500mm

BModel No. AK455

B

Chassis Lube Low Pressure FillerPump Unit 12.5kg

Zinc die-cast pump head with solid steel pump. High-volume, low-pressure output for filling auto chassislubrication reservoirs. Central lube coupling suppliedwith spare plug-in adaptor.

Delivery Pressure: 900psiDelivery per Stroke: 33cm³Hose Length: 1500mm

CModel No. AK456

C

Air Grease KitReplacement Parts

Description: Model No:High Pressure Flexi Hose 179/12755Z-Swivel Connector 179/18082Grease Control Valve 179/18104

FModel No. SEE BELOW

F

12

2

1

3

3

12.5kg

D

Air Operated

12.5kg

E

Air Operated

50kg

12.5kg 12.5kg

HEAVY DUTY

(Grease bucketnot included)



(Greasebucket notincluded)

High Volume

Air Operated Grease Kits

Fitted with high ef ficiency 50:1 air motor . Workshoptested reliability . Supplied with safety regulator toprevent over pressurisation of pump unit. Includes afollower plate to prevent pump unit cavitation andensure a smooth flow of grease. IncludesSAE100R2AT rated grease hose, z-swivel, hand gunand bucket trolley.

Model No: AK452X AK453XCapacity: 12.5kg 50kgMaximum Air Pressure: 150psi 150psiRecommended Air Pressure: 120psi 120psiDelivery Pressure: 6000psi 6000psiGrease Delivery: 1100g/min 1100g/minAir Consumption: 14cfm 14cfm

Model No. SEE BELOW

(Greasebucket notincluded)

D E-

D E

Section 7 Bulk Grease Equipment 361

Section 7 Oil Drainers362

Gravity Feed/Gravity DischargeOil Drainer 80ltr

Polyethylene reservoir, 80ltr capacity, mounted on fourcastors for mobility . Drain pan, with filter , on heightadjustable down tube. Use rotary pump or gravity draintap for emptying.

BModel No. AK80D

B

Gravity & Suction Feed/AirDischarge Oil Drainer 24ltr

Steel fabricated 24ltr reservoir and telescopic steel drainpan with metal grid filter. Venturi suction pump powersoil dipstick probes. Includes a set of quick-releaseprobes. Gravity or suction feed reservoir with airdischarge. Fitted with oil level indicator.

Model No: Capacity: Minimum Height Maximum Height Gravity Suction Gravity Airto Pan: to Pan: Feed: Probe: Discharge: Discharge:

AK36D 36ltr 760mm 1600mm AK80D 80ltr 940mm 1800mm AK454D 30ltr 790mm 870mm AK457D 75ltr 890mm 1620mm AK424DX 24ltr 1050mm 1560mm AK450DX 75ltr 890mm 1620mm

EModel No. AK424DX

E


Composite lid and drum with 30ltr reservoir and drainpan on telescopic post. Gravity drain using tap on rearof unit. Includes full-drum indicator , large diameterdrain pan insert and heavy-duty filter mesh for drainingoil filters.

CModel No. AK454D

C


Steel fabricated 75ltr reservoir and telescopic steelfunnel fitted with grid filter. Gravity drain using brasstap on rear of unit. Includes full drum indicator.

DModel No. AK457D

D

A

AIR DISCHARGEThe drainer uses a blanket of air to squeeze the oilout of the reservoir. These units are not suitable forconnection to a closed system and are not coveredby regulations requiring regular pressure testing.

PROBE SUCTION These units are supplied with a variety of suctionprobes which can be used to extract warm oil from thesump through the dipstick tube.

IMPORTANTThe drain units on these pages are suitable only forvehicles under 3.5ton gross weight, with theexception of AK468DX which is suitable forcommercial vehicles above this weight.

24ltr

30ltr 75ltr

36ltr 80ltr

Gravity Feed/Manual DischargeOil Drainer 36ltr

Polyethylene reservoir, 36ltr capacity, mounted on fourcastors for mobility . Drain pan, with filter , on heightadjustable down tube. Hand grips for manual emptying.

AModel No. AK36D

Gravity Feed/Pump-AwayDischarge Oil Drainer 75ltr

75ltr Reservoir and telescopic funnel fitted with gridfilter. Fitted with female dry-fit coupling for connection toAK450DP pump-away unit. Includes full drum indicator.

FModel No. AK450DX

F

75ltr

Air Powered Pump Away Station

This air operated 1:1 oil pump is suitable for use withour AK450DX and AK468DX oil drain units. The pumpis supplied with a wall mounting bracket and 2mtrflexible hose with a dry-fit quick coupling to attach it tothe drain unit. 2mtr Flexible air supply hose with filter,lubricator and regulator assembly is also included. Thepump can be plumbed into a run of pipe-work to awaste oil storage point sited out of the workshop.

GModel No. AK450DP

G

MANUALDISCHARGE

GRAVITYDISCHARGE

GRAVITYDISCHARGE

GRAVITYDISCHARGE

AIRDISCHARGE

PUMP-AWAYDISCHARGE

ABCDEF

Section 7 Oil Drainers 363

Gravity & Suction Feed/AirDischarge Cantilever Oil Drainer100ltr

Steel fabricated 100ltr reservoir with suction probesand air discharge. Unit features cantilever oil drain panwhich is suitable for use either under a lift or on theforecourt. Drain pan utilises vacuum suction when inthe down position and is fitted with bogey wheels foreasy manoeuvring. Fitted with oil level indicator tubeand supplied with Mercedes adaptor plus a selection ofprobes.

D

Model No. AK462DX

DGravity Feed/Air & GravityDischarge Low Level Oil Drainer95ltr

Low level drainer suitable for use on the forecourt andworkshop floor. Steel fabricated unit with a capacity of95ltr permits use with commercial vehicles. Fitted withgravity drain tap for manual discharge and female dryfit coupling for connection to pump away unit (Model No.AK450DP). Fully portable with two castors, two fixedwheels and handle.

E

Model No. AK468DX

E

Model No: Capacity: Minimum Height Maximum Height Gravity Suction Gravity Airto Pan: to Pan: Feed: Probe: Discharge: Discharge:

AK451DX 65ltr 1070mm 1590mm AK458DX 90ltr 1250mm 1800mm AK459DX 90ltr 1300mm 1750mm AK462DX 100ltr 130mm 1660mm AK468DX 95ltr 290mm 290mm

CANTILEVER OILDRAINER

In lowered position the panextends 2.2 metres makingit suitable for forecourtuse and utilises suctionevacuation of drain pan.

Full size handle foreasy manoeuvrability.

95ltr

Gravity Feed/Air Discharge Oil Drainer 65ltr

Steel fabricated 65ltr reservoir and telescopic steeldrain pan fitted with grid filter. Air discharge drain withhose. Fitted with reservoir oil level indicator tube.

AModel No. AK451DX

A

65ltr

Gravity Feed/Air Discharge Oil Drainer 90ltr

Steel fabricated 90ltr reservoir. Height adjustable steeldrain pan, fitted with grid filter . Gravity feed reservoirwith air discharge hose. Fitted with reservoir oil levelindicator tube. Heavy-duty wheels and castors for easymobility.

BModel No. AK458DX

B

90ltr

Gravity & Suction FeedAir Discharge Oil Drainer 90ltr

Steel fabricated 90ltr reservoir . Height adjustable steeldrain pan, fitted with grid filter. Gravity feed reservoir with airdischarge hose. Includes quick-release oil dipstick probes,plus adaptors for BMW and VW , powered by venturisuction pump. Fitted with reservoir oil level indicator tube.Heavy-duty wheels and castors for easy mobility.

CModel No. AK459DX

C

90ltr

AIRDISCHARGE

100ltrAIR

DISCHARGE

AIRDISCHARGE

AIRDISCHARGE

AIR & GRAVITYDISCHARGE

ABCDE

Section 7 Oil & Fluid Drainers364

D

Oil Drain Collector

Mobile waste oil drainer for use with 25ltr or othersuitable containers. Telescopic drain pan with filter gridand ball valve control. Arm fully adjustable in heightand depth and fitted with locking nuts forpredetermined height selection. Heavy-duty designtrolley with handle, two castors and two fixed wheels.Minimum Height to Pan: 1090mmMaximum Height to Pan: 1740mm

DModel No. AK449D

Air Operated Oil Pump Station

Air operated 1:1 oil pump suitable for use with ourAK450DX and AK468DX oil drain units. Supplied witha wall mounting bracket and 2mtr flexible hose with adry-fit quick coupling to attach it to the drain unit. 2mtrFlexible air supply hose with filter , lubricator andregulator assembly is also included. The pump can beplumbed into a run of pipe-work to a waste oil storagepoint sited out of the workshop.Minimum/Maximum Air Pressure: 30/120psiAir Consumption: 8.8cfmOil Delivery @ 90psi: 60ltr/min

EModel No. AK450DP

E

E

IMPORTANTThe AK450DX cannot be usedunless a pump-away station ispurchased. AK468DX can bedrained by gravity or by usingpump-away station. One pumpunit can only be used to empty onedrainer at a time although the timetaken to empty the reservoir isshort. It is usual for operators topurchase one pump-away stationand several oil drainers. AK450DPpump-away station is supplied withits own filter , regulator andlubricator to ensure trouble-freeoperation.

C

12ltr

MANUALDISCHARGE

Electric Oil Drainer 12ltr

Mobile oil drainer designed to extract oil via the dipsticktube. 12ltr Capacity tank allows easy collection and safedisposal of waste oil. Supplied with two flexible Ø6mmand Ø8mm probes, 2mtr inlet hose fitted with controltap and Ø2mm, Ø10mm and Ø16mm adaptors.Suitable for Mercedes.Power Supply: 230VMotor Power: 500WTank Capacity: 12ltr

CModel No. AK466D

Vacuum Oil & Fluid Extractor& Discharge 6ltr

6ltr Capacity device constructed from compositematerials and suitable for extraction of all types ofengine, transmission and lubricating oils from cars,motorcycles, marine engines, stationary engines andindustrial machinery. Features a controlled dischargefunction for emptying the unit. Suitable also for lowviscosity fluids such as water . Supplied with Ø5.8,Ø6.7mm suction probes and a 1mtr extension tube.Uses probes to drain engine oil through the dipstickhole. Also suitable for draining fish tanks, basins andsinks.

Capacity: 6.5ltrSuction Probes: Ø5.8 x 870mm, Ø6.7 x 870mmExtension Tube: Ø9.8 x 1010mm

AModel No. New TP6905

A

Vacuum Oil & Fluid Extractor& Discharge 18ltr

18ltr Capacity device constructed from compositematerials and suitable for extraction of all types ofengine, transmission and lubricating oils from cars,motorcycles, marine engines, stationary engines andindustrial machinery. Features a controlled dischargefunction for emptying the unit. Suitable also for lowviscosity fluids such as water . Supplied with Ø5.8,Ø6.7mm suction probes and a 1mtr extension tube.Uses probes to drain engine oil through the dipstickhole. Also suitable for draining fish tanks, basins andsinks.

Capacity: 18ltrSuction Probes: Ø5.8 x 870mm, Ø6.7 x 870mmExtension Tube: Ø9.8 x 1010mm

BModel No. New TP6906

B

18ltr6ltr

MANUALPUMP

MANUALPUMP

VACUUMDISCHARGE

VACUUMDISCHARGE

Section 7 Oil & Fluid Drainers 365

Vacuum Oil & Fluid ExtractorManual Pump 6.5ltr

6.5ltr Capacity device constructed from compositematerials and suitable for the extraction of all types ofengine, transmission and lubricating oils from cars,motorcycles, marine engines, stationary engines andindustrial machinery. Suitable also for low viscosityfluids such as water. Supplied with Ø5.8 and Ø6.7mmsuction probes and a 1mtr extension tube. Usesprobes to drain engine oil through the dipstick hole.Also suitable for draining fish tanks, basins and sinks.Capacity: 6.5ltrSuction Probes: Ø5.8 x 850mm, Ø6.7 x 850mmExtension Tube: Ø9.5 x 1000mm

BModel No. TP69

B

6.5ltr

D

Vacuum Oil & Fluid ExtractorAir Pump 5.5ltr

5.5ltr Capacity device constructed from compositematerials. Uses compressed air supply to generatevacuum. Suitable for the extraction of all types of engine,transmission and lubricating oils from cars, motorcycles,marine engines, stationary engines and industrialmachinery. Suitable also for low viscosity fluids such aswater. Supplied with Ø7 and Ø10mm suction probes anda 1100mm brake/clutch bleeding hose. Uses probes todrain engine oil through the dipstick tube.Capacity: 5.5ltrSuction Probes: Ø7 x 1050mm, Ø10 x 1050mmHose: Ø8 x 1100mmAir Supply: 90psi(5cfm)

DModel No. TP6902

5.5ltr

MANUALPUMP

AIRPUMP

Vacuum Oil & Fluid ExtractorManual Pump 9ltr

9ltr Capacity device constructed from compositematerials. Uses manual pump to generate vacuum.Suitable for the extraction of all types of engine,transmission and lubricating oils from cars,motorcycles, marine engines, stationary engines andindustrial machinery. Suitable also for low viscosityfluids such as water. Supplied with Ø6 and Ø10mmsuction probes and brake/clutch bleeding hose. Usesprobes to extract engine oil through the dipstick tube.Capacity: 9ltrSuction Probes: Ø6 x 1100mm, Ø10 x 1100mmHose: Ø8 x 1100mm

CModel No. TP6901

C

Vacuum Oil & Fluid ExtractorAir Pump 9ltr

9ltr Capacity device constructed from compositematerials. Uses compressed air supply to generatevacuum. Suitable for the extraction of all types of engine,transmission and lubricating oils from cars, motorcycles,marine engines, stationary engines and industrialmachinery. Suitable also for low viscosity fluids such aswater. Supplied with Ø6 and Ø10mm suction probes and1100mm brake/clutch bleeding hose. Uses probes toextract engine oil through the dipstick tube.Capacity: 9ltrSuction Probes: Ø6 x 1100mm, Ø10 x 1100mmHose: Ø8 x 1100mmAir Supply: 90psi(5cfm)

EModel No. TP6903

E

Vacuum Oil & Fluid ExtractorManual/Air Pump 9ltr

9ltr Capacity device constructed from compositematerials. Uses manual pump or compressed air supplyto generate vacuum. Suitable for the extraction of alltypes of engine, transmission and lubricating oils fromcars, motorcycles, marine engines, stationary enginesand industrial machinery. Suitable also for low viscosityfluids such as water . Supplied with Ø6 and Ø10mmsuction probes and brake/clutch bleeding hose. Usesprobes to extract engine oil through the dipstick tube.Capacity: 9ltrSuction Probes: Ø6 x 1100mm, Ø10 x 1100mmHose: Ø8 x 1100mmAir Supply: 90psi(5cfm)

FModel No. TP6904

F

A

9ltr

MANUALPUMP

5.5ltr

MANUALPUMP

9ltr 9ltr

Vacuum Oil & Fluid ExtractorManual Pump 5.5ltr

5.5ltr Capacity device constructed from compositematerials and suitable for the extraction of engine oilsfrom cars, motorcycles, marine engines, stationaryengines and industrial machinery. Suitable also for lowviscosity fluids such as water. Supplied with 2100mmsuction probe, easy-pour spout and cover cap. Useprobe to remove engine oil through the dipstick tube.

Capacity: 5.5ltrSuction Probe: 2100mm

AModel No. TP696

AIRPUMP

AIR & MANUALPUMP

Section 7 Fluid Transfer Pumps366

Syphon Pumps

Composite pumps with self-priming feature. Suitablefor oils and non-aggressive chemicals.Model No: Drum Suitability: Delivery:TP77 <60ltr 8ltr/minTP78 60-205ltr 12ltr/min

CModel No. SEE BELOW

C

E

G

Self-Priming Heavy-Duty LeverAction Pump

Self-priming lever pump fitted with anti-drip nozzle,2”BSP connector and dip-tube to suit 100 or 205ltrdrums. Suitable for oils, antifreeze, paraffin and other non-corrosive fluids. Approximately 330ml per strokedischarge.1200mm Dip-Tube (Optional): TP66/ACC

EModel No. TP66

Rotary Pump

Cast steel body with machined bore and rotor. Suitablefor oils, antifreeze, degreasants and other non-corrosivefluids. Supplied with 2”BSP adaptor and suitable for useon 205ltr drums. Delivers approximately 0.2ltr/revolution.

GModel No. TP55

Displacement Pump

Self priming, pistonless, displacement pump fitted withanti-drip nozzle, 2”BSP adaptor and dip-tube. Suitablefor oils, antifreeze, degreasants and other non-corrosive fluids. Approximately 250ml delivery perstroke. Accessory kit allows use on most containersand drums from 25-205ltr . Accessory Kit for 25-205ltr/48 gall. drums Model No. TP88/ACC.

FModel No. TP88

F

Rotary Pump

Cast steel body , suitable for oils, antifreeze,degreasants and other non-corrosive fluids. Suppliedwith 2”BSP adaptor and is suitable for use on 205ltrdrums. Delivers approximately 0.3ltr/revolution.

HModel No. TP54

H

A

Lever Pump

Steel barrelled, self priming, lever pump. Supplied with2”BSP adaptor and dip-tube suitable for 25 to 205ltrdrums. Suitable for oils, antifreeze, degreasants andother non-corrosive fluids. Delivers approximately300ml per stroke.

AModel No. TP68

H

Heavy-Duty Lever PumpHigh Flow

Steel barrelled, self priming, lever pump. Supplied with2”BSP adaptor and dip-tube suitable for 50 to 205ltrdrums. Suitable for oils, antifreeze, degreasants andother non-corrosive fluids. High flow unit deliversapproximately 540ml per stroke. Supplied with twodelivery nozzles, one standard swan neck and oneacute angle with filter for removing impurities from fluids.


B

Self-Priming Lever Action Pump

Self-priming lever pump fitted with anti-drip nozzle,2”BSP connector and dip-tube to suit 50 to 205ltrdrums. Suitable for oils, antifreeze, paraf fin and othernon-corrosive fluids. Approximately 480ml per strokedischarge. Supplied with 1400mm flexible deliverytube. Optional 1200mm dip-tube Model No. TP66/ACC.

DModel No. New TP6601

D

Made in

Made in

Made in

Air Operated Transfer Pump

Polypropylene body with acetal piston and nitrile seals.Self-priming unit with anti-drip shut-of f valve. Body isfitted with a 2”BSP adaptor and 915mm dip-tubesuitable to fit 205ltr drums. Compatible with most fluidscapable of being stored in plastic or metal drums. Notsuitable for aggressive chemicals. A compatibility chartis provided. For optional extension hose kit orderModel No. TP90HK. See below.Average Delivery: 15ltr/minOperating Pressure: 30-100psiAir Consumption: 4.4cfm

CModel No. TP90

C

Gear Oil Pump

Self-priming pump with polypropylene body. Suitable forpumping gear oil or other products with a similar viscosity.Includes 1500mm of hose and universal adaptor.

Note: If the container you have will not accept directmounting of TP67, order a TP67DT trolley and aTP67/X top plate. The pump fixes to the top-platewhich in turn mounts onto the trolley and avoids theneed to connect the pump directly to the container .

AModel No. TP67

Gear Oil Pump Drum Trolley

Drum trolley suitable for use with TP67 Gear Oil Pump.Suitable for use where the pump cannot be attacheddirectly to the gear oil container . Will also require theuse of TP67/X Top Plate for mounting of the pump.

EModel No. TP67DT

A

Gear Oil Bucket Pump

Fabricated steel container with powder coated finishand spring-cap lid. Rotary type pump with clear, plastictube delivers and retrieves oils and fluids. Fitted withrigid extension and hanging peg. Suitable for gear oiland fluids with similar viscosity.Capacity: 10.5ltr

BModel No. TP70

B

D

E

Oil Suction Syringe

Chromed steel suction tube with T-bar type plunger.Particularly useful for removal of oil from gearboxesand dif ferentials. Supplied with 200mm of flexiblesuction hose.Capacity: 500ml

GModel No. AK46

G

Oil Dispensing Unit16ltr

Self-priming lever pump manufactured from galvanizedsteel, supplied with 16ltr reservoir. Features carry handlefor ease of manoeuvrability. Foot plate for stability while inuse. 1.8mtr delivery hose with angled spout. Dripopening/spout storage within bucket cover for tidy storagewhen not in use. Suitable for oils up to SAE 40 viscosity.Capacity: 16ltr

FModel No. New TP16

F

10.5ltr

16ltr

Section 7 Fluid Transfer Pumps 367

D

Made in Made in Made in

Section 7 Fluid Transfer Pumps & Dispensers368

Thinners Pumps

Manufactured from Nylon 6 and suitable for use withcellulose thinners and gun wash. A universal adaptoris available for drums with pouring spouts.Model No: Drum Suitability: Delivery:TP99 25ltr 250ml/strokeTP99/205 205ltr 250ml/stroke

BModel No. SEE BELOW

BUniversal Drum Closure Adaptor

Allows fitting of TP99 and similar thinners pump todrums that are fitted with a pouring spout.

CModel No. TP99/1

C

AdBlue

Self-Priming Heavy-Duty LeverAction Pump for AdBlue

Self-priming lever pump fitted with anti-drip nozzle,2”BSP connector and dip-tube to suit 100 or 205ltrdrums. Added filter in pump to prevent any unwantedlarge particles getting into fluid system. Speciallyconstructed with Viton seals for transferring AdBlue.1” x 2000mm Hose for hands-free applications.Approximately 330ml per stroke discharge.

AModel No. TP6607

Oil Cans

Metal can with flexible spout and thumb operated leveraction.Model No: Capacity:TP300 New 300mlTP05 500mlTP1000 1000ml

EModel No. New SEE BELOW

E

F

Oil Can 180ml

Metal can with flexible spout for directional control.Finger trigger operated action for high-pressure oilspray.Capacity: 180ml

FModel No. TP04

Precision Oiler

Push-button control oil dispenser . Delivers smallamounts of lubricant for precision oiling of mechanismsand machines. Non-drip cap and aluminiumconstruction. Fitted with pocket clip.Length: 143mmCapacity: 5ml

DModel No. TP03

D

Oil Hose End Gun

Robust oil dispensing gun incorporating manual shutoff. Fitted with rigid extension, handle lock and non-drip nozzle.

*Please note that this gun is not approved for resale of oil.

GModel No. New AK4564D

G

Oil Hose End Meter Digital

Robust oil dispensing gun incorporating digital meter,manual shut of f and tough rubber protection guard.Fitted with flexible extension and non-drip nozzle. Easyto read 5-digit LCD display with resettable individual orcumulative totals.

*Please note that this gun is not approved for resale of oil.

HModel No. New AK4565D

Oil Hose End Meter DigitalAutomatic

Robust oil dispensing gun incorporating digital meter , autoshut off and tough rubber protection guard. Fitted with flexibleextension and non-drip nozzle. Auto function allows up to 4preset figures to be programmed, automatically cutting of fdelivery when desired capacity is reached. Easy to read LCDdisplay with option to reset individual or cumulative totals.*Please note that this gun is not approved for resale of oil.

IModel No. New AK4566D

IH

AMade in Made in

Gear Oil Dispensing SystemAir Operated

Mobile oil dispensing unit with air operated 3:1 doubleacting pump for gear oil with 2”BSP fittings. Pump issupplied with air management system and connectedto a 730mm rigid suction probe with non-return valve.Features 4mtr hose and digital oil meter (Model No.AK4565D supplied). Also suitable for use with engine,hydraulic, synthetic, gear and transmission oils up toSAE150 in containers up to 50kg.

Trolley Maximum Capacity: 50kg

BModel No. New AK4563D

B

Oil Dispensing SystemAir Operated

Mobile oil dispensing unit with air operated 3:1 doubleacting pump for barrel or tanks with 2”BSP fittings.Pump is supplied with air management system andconnected to a 940mm rigid suction probe with non-return valve. Features trolley, 4mtr hose and digital oilmeter (Model No. AK4565D supplied). Suitable for usewith engine, hydraulic, synthetic, gear andtransmission oils up to SAE150.


CModel No. New AK4561D

C

Oil Hose Reel Retractable10mtr

For use with AK4560D pump station. Heavy-duty steeland powder coating finish for corrosion resistance.Four roller fairlead allows smooth running of hosewhatever the angle of hose or mounting position ofreel. Multi position ratchet lock with fully enclosedspring. Includes 1.5mtr connection hose for connectingreel to pump.

Hose Length: 10mtrHose Inlet/Outlet: 1/2”BSPMaximum Pressure: 2000psiHose Size (ID): 1/2”

EModel No. New AK4567D

E

Retractable Oil Dispensing System Air Operatedwith 10mtr Hose Reel

Mobile oil dispensing unit with air operated 3:1 double acting pump for barrels or tanks with 2”BSP fittings. Pumpis supplied with air management system connected to a 940mm rigid suction probe with non-return valve.Features trolley, 10mtr retractable hose reel (Model No. AK4567D supplied) and digital oil meter (Model No.AK4565D supplied). Suitable for use with engine, hydraulic, synthetic, gear, and transmission oils up to SAE150.


Specification:Pump Ratio: 3:1Maximum Flow Rate: 12ltr/minMaximum Viscosity: SAE150Maximum Output Pressure: 350psiMaximum Air Pressure: 115psiRecommended Air Pressure: 70psiOutlet: 1/2”BSP

DModel No. New AK4562D

D

-A D

Section 7 Oil Dispensing Systems 369

Oil Dispensing Pump StationAir Operated

Air operated 3:1 double acting pump for barrel ortanks with 2”BSP fittings. Pump is supplied with airmanagement system and connected to a 940mmrigid suction probe with non-return valve. Featureshose for attachment to digital oil meter (Model No.AK4565D supplied) or to optional retractable hosereel (Model No. AK4567D). Suitable for use withengine, hydraulic, synthetic, gear and transmissionoils up to SAE150.

AModel No. New AK4560D

A

Section 7 Diesel & Fluid Transfer Pumps370

Diesel & Fluid Transfer PumpKits

Electric transfer pump kits available for 12, 24 or230Volt supply. Lightweight yet robust pump unit withthermal overload protection. Mounts directly onto drumor tank and is ideal for on-site filling. Includes on/of fswitch, 4mtr delivery hose with manual delivery nozzle,suction hose and filter.Model No: TP97 TP9724 TP97230Voltage: 12V 24V 230VSpeed: 7000rpm 7000rpm 10000rpmCurrent: 14A 10A 1.8APower: 180W 240W 320WDuty Cycle: 60min/hr 60min/hr 60min/hrFlow Rate: 38ltr/min 43ltr/min 52ltr/min

AModel No. SEE BELOW

A

Low Voltage Diesel & FluidTransfer Pump Kits High Volume

Electric 12 or 24Volt pump kit with battery clips. Highflow pump unit with bypass valve, suitable for fillingdiesel vehicles in the field. Cast iron pump body withanti-corrosion finish. Includes integral on/of f switch,delivery hose with manual delivery nozzle and filter .Model No: TP98 TP9824Voltage: 12V 24VSpeed: 2000rpm 2000rpmCurrent: 35A 18APower: 240W 240WDuty Cycle: 30min/hr 30min/hrFlow Rate: 85ltr/min 85ltr/min


C

Low Voltage Diesel & FluidTransfer Pump Kits

Electric 12 or 24Volt pump with battery clips. Suitablefor filling diesel vehicles in the field. Self-priming unitdelivers up to 40ltr of fluid a minute. Supplied with 4mtrhose and TP108 manual delivery nozzle. Includeson/off switch, carry handle, mounting plate and suctionhose filter.Model No: TP96 TP9624Voltage: 12V 24VSpeed: 2800rpm 2800rpmCurrent: 16A 13APower: 140W 160WDuty Cycle: 30min/hr 30min/hrFlow Rate: 40ltr/min 40ltr/min


B

Low Voltage Diesel & FluidTransfer Pump Kit

Electric, dual voltage, 12/24Volt pump with battery clips.High flow pump unit with bypass valve, suitable for fillingdiesel vehicles in the field. Metal, powder coated bodycover with carry handle. Includes integral on/off switch.Voltage: 12/24VSpeed: 1400/2400rpmCurrent: 15/17APower: 180/400WDuty Cycle: 30/10min/hrFlow Rate: 40/60ltr/min

DModel No. TP91224

D

Diesel & Fluid Meter

Volumetric nutating disc meter with three digit resettabledisplay and six digit total display . Filter and flangeassembly allows meter to be positioned in fourconfigurations. Suitable for use with TP91224 and TP955.

EModel No. TP91300

E

12V

24Vor

12V/24V

12V

24Vor

12V

24Vor

230Vor

HighVolume

D

E

Section 7 Diesel & Fluid Transfer Pumps 371

Gravity Dispensing Kit

3mtr Delivery hose with 1” male brass connectors.Supplied with 1” male and female lockable, brass,angle valve and TP108 delivery nozzle.

DModel No. TP963

D

Automatic Delivery Nozzle

Robust, die-cast, aluminium body with plastic grip andrubberised protective cover. Suitable for use with dieseland leaded petrol dispensed using a pumped system.Automatic, micro-touch valve for instant tank-full shut-off. Supplied with three-stage trigger lock and swivelhose connection. Suitable as replacement nozzle forTP955 pump kit. Not suitable for gravity dispensing.Nozzle Outside Diameter: 15/16”Inlet: 1”BSPMaximum Flow Rate: 60ltr/min

GModel No. TP109

Diesel & Fluid Meter

Volumetric nutating disc meter with three digitresettable display and six digit total display . Uniquefilter and flange assembly allows meter to bepositioned in sixteen configurations. Suitablereplacement for TP955 system.

CModel No. TP956

C

Digital Hose End Meter

Aluminium body with integral digital electronicmetering. Large, four digit, 15mm high LCD displaycalibrated in litres. Features two memory functions.Supplied with 1”x1”BSP Male/Male adaptor. Fitted with2 x AAA batteries. Suitable for TP108 and TP109.

BModel No. TP100

B

Manual Delivery Nozzle

Die-cast aluminium body and trigger assembly. Deliverynozzle suitable for use with diesel and leaded petrol.Supplied with swivel connector. Suitable asreplacementnozzle for TP96, TP9624 and TP963 pump kits.Nozzle Outside Diameter: 1”Inlet: 1”BSPMaximum Flow Rate: 120ltr/min

FModel No. TP108

F

Diesel & Fluid Transfer System

Self priming, rotary vane pump with bypass valve.Direct drive 230V olt motor fitted with overloadprotector. Volumetric, nutating disc, resettable meterwith large three-digit display . Supplied with TP109automatic delivery nozzle and 4 metres of reinforced3/4” hose. Unit is suitable for wall, tank or pedestalinstallation. Flow rate 56ltr/min.

Voltage: 230VSpeed: 2800rpmCurrent: 3APower: 350WFlow Rate: 56ltr/minPressure: 3barProtection: IP55

AModel No. TP955

A

285mm 310mm

300m

m

300m

m

150mm 100mm

230V

Low Voltage SubmersibleTransfer Pump 12V

Robust and compact portable pump for use with diesel,non-aggressive chemicals and fresh or dirty water .Suitable for re-fuelling/fluid transfer of plant, agriculturaland marine equipment on site. The pump is suppliedwith a 3mtr outlet hose and stainless steel nozzle plus a4mtr battery cable with clips. Will fit through a Ø54mmaperture to allow emptying of containers. End cap canbe unscrewed for periodic cleaning of the filter.Voltage: 12VCurrent: 4.5ADuty Cycle: 15min/hrFlow Rate: 16.5ltr/min

HModel No. TP94

H

12V

GDigital Flow Meter

Robust rubber housing with integral digital electronicmetering. Easy to read large, four digit, 28mm highLCD display calibrated in litres. Features flow rateindication. 1”x1”BSP Female fittings. Powered by 2 xAAA batteries (supplied). IP65 Rated protection.

EModel No. New TP101

E

3mtr

Section 7 Drain Pans372

D

DRP02, DRP03 & DRP04feature spill-proof lip to aidcarrying and pouring.

DRP02, DRP03, DRP04 &DRP05 have an enclosedpouring spout to reduce spillsand splashes.

DRP02, 03 & 04 feature largehandles for left or right handeduse.

DRP05 features vent toensure smooth flow of oil inand out of container.

17ltr Oil Drain Pan

Suitable for multiple oil changes. Features anti-splashlip that contains fluid when carrying or pouring. Largehandles and enclosed pouring spout makes easy workof returning oil/fluid to recycling container.Capacity: 17ltrApproximate Diameter: 460mmHeight: 150mm

CModel No. DRP03

C

8ltr Oil Drain Pan

Large enough for single oil change. Includes oil filterdrain shelf, pouring lip and hanging hole.Capacity: 8ltrApproximate Diameter: 365mmHeight: 110mm

AModel No. DRP01

A

7.6ltr Oil Drain Pan

Features anti-splash lip that contains fluid whencarrying or pouring. Large handles and enclosedpouring spout makes easy work of returning oil/fluid torecycling container.Capacity: 7.6ltrApproximate Diameter: 390mmHeight: 120mm

BModel No. DRP02

B

17ltr Antifreeze Drain Pan

Colour coded version of DRP03 helps keep dif ferentfluids isolated and reduces cross contamination.Capacity: 17ltrApproximate Diameter: 460mmHeight: 150mm

DModel No. DRP04

16ltr Oil Drain Pan & RecyclingContainer

Convenient for the safe, clean collection andtemporary storage and carriage of waste oil. Integraloil filter drain position. Suitable for multiple oil changes.Includes drain vent to aid smooth flow of oil.

Capacity: 16ltrApproximate Diameter: 460mmHeight: 180mm

EModel No. DRP05

E

9ltr Oil & Fluid Drain Pan forEngine Stands

Metal tray fits over base frame of engine stand tocollect oil/grease while working. Metal back plate fitsat an angle against stand upright to catch furtherspillage. Easily removed for emptying. Suitable for usewith ES350 and ES450 engine stands.Capacity: 9ltrSize: 480 x 465 x 95mmNote: Illustrated with ES350 engine stand (not included).

FModel No. DRP08

Drain Pans

These drain pans have a broad appeal and are suitable for both the DIY user and professional mechanic. Purpose-made for the recovery of oil and antifreeze, these panshelp keep the workshop floor free from oily residue and aid return of oil to recycling containers with minimum risk of spills or splashes. These pans are also suitable for partscleaning operations with water based solvents such as Sealey AK25 and AK2501. Check the features: Made from high density polyethylene with UV stabiliser. Large handles, featured on models DRP02-DRP05, are positioned to aid carrying and pouring. Heavy wall construction stays rigid, even with hot oil. Resistant to most chemicals and solvents*. Excess capacity helps prevent overflow or spillage. Will not dent or rust and are easy to clean. *Not suitable for spray gun cleaner.

Model No. SEE BELOW

A E-

8ltr 7.6ltr 17ltr

17ltr 16ltrF 9ltr

Oil recovery/storage devices on this page are notsuitable for the long-term storage of flammable ordangerous liquids.

All drain pans are made fromimpact resistant high-densitypolyethylene.

Section 7 Drain Pans & Water Containers 373

10ltr Fluid Container with Tap

10ltr Polyethylene fluid container with attached screwcap and tap for easy fluid control.

Capacity: 10ltr

FModel No WC10T

F



Capacity: 20ltr

GModel No. WC20T

G



Capacity: 35ltr

HModel No. WC35T

H

Oil Drain Pan & Recycling Containers

These drain pans have a broad appeal and are suitable for both the DIY user and professional mechanic. Purpose-made for the recovery of oil and antifreeze, these pans help keep the workshop floor free from oilyresidue and aid return of oil to recycling containers with minimum risk of spills or splashes. Made from highdensity polyethylene with UV stabiliser. Heavy wall construction stays rigid, even with hot oil. Excess capacityhelps prevent overflow or spillage. Large handles positioned to aid carrying and pouring. Resistant to mostchemicals and solvents. Will not dent or rust and are easy to clean. Includes drain vent to aid smooth flow of oil.

Model No: DRP06Capacity: 5ltrSize: 440 x 290 x 135mm


A

Model No: DRP07Capacity: 10ltrSize: 570 x 320 x 125mm

B

54ltr Wheeled Oil & Fluid DrainPan & Recycling Container

Ensures safe and clean collection, transportation andtemporary storage of waste oil. Features heavy-dutyconstruction with wheeled undercarriage for easiertransportation of full drainer. Includes four integral oilfilter drain positions. Stores flat or in upright position.

Capacity: 54ltrSize: 915 x 660 x 240mm

CModel No. DRP09

C

10ltr Water Container

10ltr Plastic water container with screw cap and innersealing plug.Capacity: 10ltr

DModel No. WC10

D

20ltr Water Container withSpout

20ltr Plastic water container with screw cap, innersealing plug, spout and provision for air vent forsmooth pouring.Capacity: 20ltr

EModel No. WC20

E

C

5ltr 10ltr

10ltr 20ltr

10ltr 20ltr 35ltr

54ltr

Suitable for Commercial Vehicles

B-

A B

Hydraulic Drum Loader 205ltr

Ideal for loading and unloading barrel bunds, vans andgeneral drum handling when forklift is not available.Suitable for 205ltr drums. Foot operated hydraulics,side handles and smooth rolling wheels aid handlingand manoeuvrability.Maximum Drum Height: 1610mmLeg Height: 65mmLeg Length: 590mmWidth Inside Legs: 700mmMaximum Width: 800mmOverall Maximum Height: 1950mmOverall Minimum Height: 1710mmWeight: 67kg

CModel No. DH03

C

Drum Dolly

Transport drums quickly and safely on large diametercastor wheels. Fitted with one locking castor. Suitablefor 48 gallon and 205ltr drums.

EModel No. TP10

E

A

A

A

Drum Stillage

Allows safe storage of 48 gallon and 205ltr drums inthe horizontal position for quick dispensing of contents.Radiused frame helps up-end drums.

DModel No. TP11

D

See page 379 for our range of Maintenance Spill Kits.

B

Metal Drain Pans

Not only suitable for oil changes, these zinc-plated pans are ideal for cleaning and storing vehicle components.May also be used as drip-trays under vehicles.

Model No: DRPM1 DRPM2 DRPM3 DRPM4Capacity: 13ltr 17ltr 20ltr 28ltrOverall Size (W x D x H): 432 x 331 x 89mm 489 x 371 x 91mm 432 x 331 x 143mm 489 x 371 x 153mm

BModel No. New SEE BELOW

4321

1

3

4

2

Barrel Stacker 25ltr, 100ltr &205ltr Drums

Manufactured from polyethylene, making this ideal forstoring aggressive chemicals. Moulded with a gradualdecline and recesses to secure drum. Suitable for usewith Sealey’s range of barrel bunds, which enablessafe decanting of liquids into smaller containers.Lightweight for easy transportation and positioning, yetstill strong and durable.

Dimensions (L x W x H): 765 x 640 x 720mm

AModel No. New DRP16

Section 7 Drain Pans & Drum Handling374

Barrel BundsPolyethylene

Manufactured from polyethylene, making the bundsideal for storing aggressive chemicals. Corrosionresistant, will not rust or leak and are maintenancefree. Lightweight for easy transportation andpositioning, yet still strong and durable.

Model No: Dimensions (LxWxH): Drum Capacity:DRP12 1220 x 820 x 330mm 2 x 205ltrDRP13 1280 x 1280 x 275mm 4 x 205ltr

C D-

Barrel BundsSteel

Manufactured from heavy-duty 3.5mm steel.Removable galvanized steel grid platform. Bund canbe accessed and moved from all four sides.

Model No: Dimensions (LxWxH):Drum Capacity:DRP10 1340 x 800 x 315mm 2 x 205ltrDRP11 1200 x 1200 x 340mm 4 x 205ltr

A B-

B

Barrel Bunds

The final stages of The Control of Pollution (OilStorage) Regulations 2001, came into ef fect on 1stSeptember 2005. Anyone storing oil in containersgreater than 200ltr are affected by the regulations. Anytank, container or drum must be bunded. The bundmust have a capacity of not less than 1 10% of thelargest or 25% of their total aggregate storage capacity,whichever is the greater. The DRP10, DRP11, DRP12and DRP13 comply with these regulations.

A

Model No. SEE BELOW

D

C

4 x 205ltr Drum Capacity




Model No. SEE BELOW

AB

CD

Adjustable Height Ramp forBarrel Bunds & Kerbs

Adjustable ramp enables easy drum handling overkerbs and onto barrel bunds. Made from heavy-dutysteel with tread plate to help prevent slipping whilstmoving drum. Height adjustment allows ramp to fitbarrel bunds from 275 to 345mm high. Adjustable kerbattachment allows easy access up and down kerbsfrom 90 to 140mm high.Length: 965mmRamp Width: 670mmOverall Width: 750mmBarrel Bund Height Adjustment: 275-345mmKerb Height Adjustment: 90-140mm

EModel No. DRP15

E

DRUM HANDLING EQUIPMENTSee pages 660 & 661 for our fullrange of drum handling equipment.

Height Adjustable90 - 345mm

Suitable forBarrel Bunds

& Kerbs

Section 7 Barrel Bunds 375

Translucent Measuring Jugs

A range of five translucent measuring jugs with easy-to-read scales for accurate measurement.Model No: Capacity:JT0250 0.25ltrJT0500 0.5ltrJT1000 1ltrJT2000 2ltrJT5000 5ltr


A

Mixture Measuring Jug 500ml

Translucent measuring jug with 500ml capacity . Easy-to-read scale in litres, millilitres and with addedmixture percentage levels.

Capacity: 0.5ltr

BModel No. JM500

B

Fixed Spout Measuring Jugs

Robust and stable ergonomic design. Manufacturedfrom hard wearing polyethylene, resistant to oil, fueland most acids. Fixed straight spout.

Model No: Capacity:J1 1ltrJ5 5ltr


C

Flexible Spout Measuring Jugs

Robust and stable ergonomic design. Manufacturedfrom hard wearing polyethylene, resistant to oil, fueland most acids. Removable flexible spout.

Model No: Capacity:J2F 2ltrJ5F 5ltr

DModel No. SEE BELOW

D

Rigid Spout MetalMeasuring Jugs

Wide mouthed tin plate jug with polyethylene spout.Handle for safe and easy pouring.

Model No: Capacity:JM1 1ltrJM2 2ltr


Flexible Spout MetalMeasuring Jugs

Wide mouthed tin plate jug with flexible metal spout.Handle for safe and easy pouring.

Model No: Capacity:JM1F 1ltrJM2F 2ltr

GModel No. SEE BELOW

F G

Flexible Spout Container Jugs

Polyethylene jug resistant to oil, fuel and most acids.Removable flexible spout. Screw cap and lid enablesjug to be used as a container, to ensure safer handlingof liquid, preventing spillages.

Model No: Capacity:JDL1 1ltrJDL2 2ltrJDL5 5ltr

EModel No. SEE BELOW

E

Section 7 Measuring Jugs376

Solvent Safety Funnels

Fitted with hinged lid to comply with solvent handlingregulations. Multiple fixing options available includingUniversal Adaptor Model No. SOL V/SFX for drumswith integral, pull-out pouring spout.

Model No: Description: Fitting:SOLV/SF Safety Funnel 2” FemaleSOLV/SFU Safety Funnel with n/a

Universal AdaptorSOLV/SFX Universal Adaptor n/aSOLV/SFA Adaptor 2” Male

H K-

Funnel Set 3pc

Polythene funnel set suitable for many fluids includingdetergents, pesticides, diesel and petrol. Set comprisesØ75mm, Ø150mm and Ø250mm funnels with hangingtabs. Not suitable for acetone, gun wash or thinners.

Funnel Ø: 75, 150, 250mm

DModel No. F98

D

Tractor Funnel

Heavy-duty funnel manufactured from high densitypolyethylene. 255 x 165mm Aperture to accommodate up-ended containers. Supplied with water separatingfilter. Tapered spout with venting ribs.

GModel No. OIL/TF

G

Model No. SEE BELOW

Fixed Spout Metal Funnels

Manufactured from tin plate with polyethylene spout.Removable brass filter. High rim acts as splash guard.Handle for safe and easy pouring. Suitable forindustrial and workshop use.

Model No: Diameter:FM16 160mmFM20 200mm


E

Flexi-Spout Metal Funnels

Manufactured from tin plate with handle for safe andeasy pouring. Removable brass filter. High rim acts assplash guard. Supplied with fixed and detachable,flexible spout. Suitable for industrial and workshop use.

Model No: Diameter:FM16F 160mmFM20F 200mm


F

HI

JK

H I-

I

J

K

Fixed Spout Funnels

Polyethylene funnels resistant to oil, fuel and someacids. Rigid straight spout with ventilation tube. Griptab with integral hanging eye. Available in three sizes.F2 and F3 include filter.

Model No: Diameter:F1 120mmF2 200mmF3 250mm


A

Flexi-Spout Funnel

Polyethylene funnel resistant to oil, fuel and someacids. Removable two-step flexible spout. Ideal forvehicles with smaller diameter unleaded filler necks.Fitted with handle and removable brass filter.

Diameter: 160mm

BModel No. F16F

B

Flexi-Spout Container Funnels

Polyethylene funnels resistant to oil, fuel and someacids. Integral mesh filter. Flexible spout. Screw capand lid enables funnel to be used as a container toensure safer handling of liquids, preventing spillages.

Model No: Diameter:F99/180 180mmF99/220 220mm


C

SOLV/SFU supplied fitted withUniversal Adaptor SOLV/SFX.

Section 7 Funnels 377

E

Jiggle Syphon

Syphon type drainer with jiggle action. Simply movehose up and down in vertical position to start flow .Supplied with 1.75mtr petrol hose.

AModel No. EC94

A C

D

Air Operated Fuel Tank Drainer

Fully mobile unit on rigid metal trolley. Air pump usesregulated (30-60psi) workshop air supply. Designed tofully empty both tank and fuel lines of petrol or dieseland includes three fuel line hose adaptors and threeinjector adaptors. Place drain tank onto trolley , insertdrain tube then start air motor. Mandatory equipmentfor VBRA members.Recommended Air Pressure: 30-60psiAir Consumption: 4cfm

DModel No. TP95

Storage of Fuel Note that most local authorities permit the in-usestorage of limited quantities of fuels without holding astorage licence. Check with your local authority formore details.

Model TP50 is suitable forsyphoning petrol and diesel.

Extract oil through thedipstick tube with TP50.

Multi-Purpose Syphon & PumpKit 8pc

Composite pump assembly suitable for the syphoningof fluids including diesel, petrol, oil, detergents andpesticides. Not suitable for use with aggressivedetergents and solvents. Supplied with 2 x 1.3mtrtransfer hoses and 800mm narrow bore hose forperforming oil extraction through the dipstick tube. Thepump may also be used for tyre inflation - a 440mmhose and clip-on connector is supplied for thispurpose.

EModel No. TP50

Jerry Cans 20ltr

Manufactured from 0.9mm pickled steel sheet with fuelresistant lining. Colour coded for easy identification ofcontent. Red - Lead Replacement Fuel, Green -Unleaded Fuel, Black - Diesel. Includes unique widechannel breather for smoother pouring. Leak-proofbayonet closure allows storage of the can in anyposition. The bayonet is additionally secured with alocking pin to prevent accidental opening.Manufactured to comply with the following standards;AS(Australian), SP(Sweden), TUV-Reinland(German).

Model No: JC20 JC20G JC20BCapacity: 20ltr 20ltr 20ltrColour: Red Green BlackSpout (Optional): JC20/S JC20G/S JC20B/S

GModel No. SEE BELOW G

1 2 3

1 2 3

Emergency Fuel Transfer Pump

Easy to use compact Syphon Pump with self-primingfeature, suitable for light oils and non-aggressivechemicals.

Length: 1700mm

BModel No. New EC97

B

F

Double Diaphragm Fuel TransferPump

Self-priming high performance double diaphragm leverpump. Heavy-duty die cast aluminium pump head withstainless steel pistons and fuel resistant nitrile rubberdiaphragm. 2”BSP Connector and telescopic dip tubeto suit 50 to 205ltr drums. Approximately 800ml per fullstroke discharge. Supplied with 8ft anti-staticdischarge hose, delivery nozzle with holder . Suitablefor various oils, petrol, diesel, antifreeze, paraffin andother non-corrosive fluids.

FModel No. New TP6918

F

Emergency Fuel Drainer

Syphon action drainer with starter bulb and one-wayvalve.

Length: 1900mm

CModel No. EC96

Section 7 Fuel Transfer Equipment378

AZORB® Oil Spill Mats

Absorbent mats for industrial and garage fluids. Eachtriple layer mat has an absorption capacity ofapproximately one litre and is suitable for both oil andwater based fluids. Being lint-free the mat is ideal asan absorbent workbench or floor cover as well as formopping up spills. Available as 1 roll (2 mats) or boxof 6 rolls (12 mats), Model Nos. AZS, AZ06,respectively.

Model No: Contents: Mat Size:AZS 1 Roll, 2pc 390 x 530mmAZ06 6 Rolls, 2pc 390 x 530mm

Model No. SEE BELOW

C

Oily Waste Cans

Oily waste cans are essential for disposal of paper wipes/cloths which have flammable liquids soaked into them.Galvanized steel body construction with durable powder-coated finish. Flow-through base to disperse heat anda lid that stays shut when not in use. Lid is operated by a foot pedal. Includes hand-lift.

Model No: OWC23 OWC53Capacity: 22.7ltr 53ltrHeight: 400mm 500mmDiameter (Bin): 300mm 400mmWeight: 3.7kg 5.9kg

Model No. SEE BELOW

D E

22.7ltr 53ltr

Latex Disposable Gloves Lg/XLgPack of 100

101 Uses around the workshop. Provides excellentprotection whilst being light and flexible. Supplied indispenser box of 100 ambidextrous gloves. Silicon-freeand dusted for easy donning.

FModel No. SSP24

F

Spill Kit Maintenance Pack 9ltr

Designed to absorb spills and drips with a maximumcapacity of nine litres. Contains a range of highabsorbency pads, wipes, mat with a disposable bag andone pair of gloves. Compact kit providing quick and easyaccess for clearing spills and easy storage. Suitable foroils, diesel, petrol, cutting fluids, coolants, mild solvents,turpentine, acetone, MEK, trichloroethylene and water.Supplied in a durable, zipped carry-case.Applications: Oils, Diesel, Petrol, Cutting Fluids,Coolants, Mild Solvents, Turpentine, Acetone,MEK, Trichloroethylene, WaterCapacity: 9ltrContents: 20 x Pads, 1 x Mat, 5 x Wipes,1 x Pair Gloves, 1 x Disposal Bag with TieSize: Pad; 300 x 3 x 300mm,Mat; 300 x 12 x 290mm, Wipe; 350 x 320mm

AModel No. GPSK09

A

Spill Kit Maintenance Pack 55ltr

Designed to absorb spills and drips with a maximumcapacity of up to fifty-five litres. Including a range ofhigh absorbency pads, mats and containing seals withtwo disposable bags and one pair of gloves. Kitproviding quick and easy access for clearing largerspills and can be easily stored away. Suitable for oils,diesel, petrol, cutting fluids, coolants, mild solvent,turpentine, acetone, MEK, trichloroethylene and water.Supplied in a durable, zipped carry-case.Applications: Oils, Diesel, Petrol, Cutting Fluids,Coolants, Mild Solvents, Turpentine, Acetone,MEK,Trichloroethylene, WaterCapacity: 55ltrContents: 40 x Pads, 2 x Mats, 2 x Seals,1 x Pair Gloves, 2 x Disposal Bags with TiesSize: Pad; 530 x 3 x 390mm,Mat; 560 x 13 x 290mm, Seal; 1500 x 65mm

BModel No. GPSK55

B

D E

D E-

C

C

SPILL KITMAXIMUMCAPACITY

9ltr

SPILL KITMAXIMUMCAPACITY

55ltr

Section 7 Oil Accessories 379

B

Jerry Can 20ltr - Red

Spout (Optional): JC20/S

GModel No. JC20

G

Jerry Can 20ltr - Black

Spout (Optional): JC20B/S

IModel No. JC20B

I

Pouring Spouts for Jerry Cans

Detachable pouring spouts for JC10 & 20 series Jerry Cans.Model No: Colour:JC20/S RedJC20G/S GreenJC20B/S Black

KModel No. SEE BELOW

Jerry Can 20ltr - Green

Spout (Optional): JC20G/S

HModel No. JC20G

H

Jerry Can 10ltr - Red

Spout (Optional): JC20/S

DModel No. JC10

D

Jerry Can 10ltr - Black

Spout (Optional): JC20B/S

FModel No. JC10B

F

Jerry Can 10ltr - Green

Spout (Optional): JC20G/S

EModel No. JC10G

E

Fuel Can 5ltr - RedAModel No. JC5R

A

Fuel Can 5ltr - GreenBModel No. JC5G

B

Fuel Can 5ltr - BlackCModel No. JC5B

C

Fuel Cans 5ltr

EN and UN approved 5ltr plastic fuel cans with safety screw lock cap and flexible pouring spout. Colour coded for easy identifi cation of content. Red - Lead Replacement Fuel, Green - Unleaded Fuel, Black - Diesel.

Model No. SEE BELOW

A C-

Vehicle Bracket for 20ltr JerryCan

Lockable vehicle mounting bracket with anti-vibrationmounts for 20ltr jerry can. Ideal for a variety of vehiclesincluding agricultural, 4x4 and commercial. Padlocknot included. For the full range of padlocks please seepage 401 for more details.

JModel No. JC20VB

J K

Jerry Cans 10 & 20ltr

Manufactured from 0.9mm pickled steel sheet with fuel resistant lining. Available in 10ltr and 20ltr capacities. Colour coded for easy identification of content. Red - LeadReplacement Fuel, Green - Unleaded Fuel, Black - Diesel. Includes unique wide channel breather for smoother pouring. Leak-proof bayonet closure allows storage ofthe can in any position. The bayonet is additionally secured with a locking pin to prevent accidental opening. Manufactured to comply with the following standards;AS(Australian), SP(Sweden), TUV-Reinland(German).

Model No. SEE BELOW

D I-

Red - Lead Replacement Green - Unleaded Black - Diesel

Red - Lead Replacement Green - Unleaded Black - Diesel

RedLead Replacement

GreenUnleaded

BlackDiesel

Section 7 Fuel & Jerry Cans380

Section 8Storage & Workstations382 Mobile Toolboxes & Cases386 Garage Storage System387 American PRO® Tool Chests390 Superline PRO® Tool Chests392 Superline PRO® Tool Chests - Wide Body394 Premier Ball Bearing Tool Chests396 Premier Ball Bearing Workstations397 Premier Ball Bearing Tool Chest Accessories398 Premier Ball Bearing Tool Chest Tool Kits400 Superline PRO® Tool Chests - Stainless Steel401 Tool Chest Accessories & Padlocks404 Workshop Trolleys & Mobile Workbenches406 Workbenches409 Lockers & Flammables Storage Cabinets410 Wall Systems & Parts Storage413 Truck & Site Boxes416 Key Security417 Cash Boxes, Safes & Lock Alarm Security418 Shelving & Racking Systems

Toolbox with Tote Tray & Wheels 650mm

Large hip top design toolbox. Features wheeled base and pull-out handle for ease of transportation. Lid includesthree removable organisers, two with four adjustable compartments and one with three fixed. Fitted with foldingcarry handle. Includes tote tray with two integral organisers with three adjustable compartments. Large storagecompartment suitable for hand tools and small power tools etc. Padlock eye included for extra security.

Size (W x D x H): 650 x 280 x 320mm

AModel No. AP528

A

A

A

Tool Storage Bag 300mm

Reinforced nylon bag with padded base for addeddurability. Adjustable shoulder strap can be hooked tometal clasps for carrying heavier loads. Ten inner andten outer pockets for better organisation. Cushionedcarry handles and metal frame supported zip.

Size (W x D x H): 300 x 200 x 255mmStrap Length: 1.5mtrOuter Pockets: 10Inner Pockets: 10

BModel No. AP300

B C D

Tool Storage Bag 500mm

Reinforced nylon bag with padded base for added durability . Adjustable shoulderstrap can be hooked to metal clasps for carrying heavier loads. Twelve inner andtwelve outer pockets for better organisation. Cushioned carry handles and metalframe supported zip.Size (W x D x H): 500 x 280 x 330mmStrap Length: 1.5mtrOuter Pockets: 12Inner Pockets: 12

EModel No. AP500

E

Tool Storage Bag with Multi-Pockets 500mm

Reinforced nylon bag with padded base for added durability. Adjustable shoulderstrap can be hooked to metal clasps for carrying heavier loads. Multiple inner andouter pockets and tool loops for complete organisation. Cushioned carry handlesand metal frame supported zip.Size (W x D x H): 500 x 280 x 330mmStrap Length: 1.5mtrOuter Pockets: 40Inner Pockets: 6

FModel No. AP501

F

Tool Storage Bag withMulti-Pockets 300mm

Reinforced nylon bag with padded base for addeddurability. Adjustable shoulder strap can be hooked tometal clasps for carrying heavier loads. Multiple inner andouter pockets and tool loops for complete organisation.Cushioned carry handles and metal frame supported zip.

Size (W x D x H): 300 x 200 x 255mmStrap Length: 1.5mtrOuter Pockets: 32Inner Pockets: 8

CModel No. AP301

Open Tool Storage Bag 500mm

Nylon bag with padded bottom for added durability .Adjustable shoulder strap can be hooked to metal clasps forcarrying heavier loads. Open design for easy access to tools.Multiple pockets and tool loops for complete organisation.Metal handle with foam padding for added comfort.Size (W x D x H): 500 x 280 x 300mmStrap Length: 1.5mtrHandle Ø: 20mmOuter Pockets: 18Inner Pockets: 10

DModel No. AP505

Section 8 Mobile Toolbox & Tool Storage Bags382

Aluminium Storage CasesSet of 3

Heavy-duty storage cases with butterfly lockingmechanism and eye to accept padlock (not included)for added security. Suitable for storing or transportingexpensive goods safely . Tough reinforced cornersmaking units sturdy . Features comfort grip sidehandles for even weight distribution when lifting.Handles and locks are both recessed to preventdamage when in transit. Tough composite feet raisebase away from ground to help prevent panel damage.

Size (W x D x H):Large Box: 608 x 456 x 518mmMedium Box: 543 x 410 x 468mmSmall Box: 482 x 360 x 424mm

GModel No. New AP600

Cantilever Toolbox 4 Tray530mm

Traditional cantilever design with four tool trays andcentral tool storage area. Top flaps accept padlock (notincluded), for added security.

Size (W x D x H): 530 x 210 x 220mm

CModel No. AP521

C

G

Aluminium Topchests

The storage capacity of a tool chest coupled with theversatility of a carry-type toolbox. Features elastic andhook-and-loop storage facilities in lid. Topcompartment and drawers are lined to protectcontents. Drawers are automatically locked, fortransportation, when lid is closed and feature ball-bearing runners for superior performance.

Model No. New SEE RIGHT

Model No: No. of Drawers: Size (W x D x H):AP0702 2 545 x 250 x 265mmAP0703 3 545 x 250 x 335mm

Size for all Drawers 455 x 195 x 50mm

E F

E F-


Traditional cantilever design with two tool trays andcentral tool storage area. Top lid accepts padlock (notincluded), for added security.

Size (W x D x H): 466 x 210 x 170mm

Model No. New AP530

A


Traditional cantilever design with four tool trays andcentral tool storage area. Top lid accepts padlock (notincluded), for added security.

Size (W x D x H): 466 x 210 x 232mm

BModel No. New AP531

B

Toolbox with Tote Tray 510mm

Heavy-duty steel toolbox with integral tote tray andcomposite carry handle. Includes hasp to acceptpadlock (not included), for extra security.

Size (W x D x H): 510 x 218 x 240mm

DModel No. New AP533

D

2 Drawer 3 Drawer

Ball Bearing Ball Bearing

Drawer SlidesDrawer Slides

Drawers are fitted withBall Bearing Dr awerSlides.

See next page for our range of Metal Cases withRemovable Storage Bins.

FE

Section 8 Toolboxes & Storage Cases 383

A

B

Stainless Steel Toolboxeswith Tote Tray

Heavy-duty stainless steel toolbox with integralcomposite tote tray. Soft grip carry handle for addedcomfort. Includes eye for padlock (not included), forextra security.

Model No. Size (W x D x H):AP505S 505 x 245 x 225mmAP580S 580 x 280 x 225mmAP660S 660 x 280 x 225mm

Model No. New SEE BELOWA

C

Metal Cases with Removable Storage Bins

Tough and durable metal cases featuring plastic removable storage bins. Fitted with sturdy swing type handles. Twin toggle locking catches and one safety catch provideadded security. Ideal for storing a mixture of small and large fixings and components etc. Separate tools and parts storage.

Model No: APMC11 APMC15 APMC18 APMC27Specification (W x D x H):Overall Size: 330 x 228 x 66mm 385 x 280 x 66mm 437 x 340 x 66mm 438 x 340 x 94mmSmall Bin: (x2) 53 x 53 x 61mm (x9) 53 x 53 x 61mm (x8) 53 x 53 x 61mm (x12) 53 x 53 x 43mmMedium Bin: (x7) 106 x 53 x 61mm (x1) 106 x 53 x 61mm (x4) 106 x 53 x 61mm (x6) 106 x 53 x 43mmLarge Bin: (x2) 106 x 106 x 61mm (x4) 106 x 106 x 61mm (x4) 106 x 106 x 61mm (x6) 106 x 106 x 43mmX-Large Bin: - (x1) 215 x 106 x 61mm (x2) 215 x 106 x 61mm (x3) 215 x 106 x 43mm

Model No. SEE BELOW

G J-

G H I J

IH

D

E

F

Professional WaterResistant Storage Cases

High impact injection moulded water resistant case forthe safe storage of technician’ s instruments and/orequipment. Heavy-duty design with extra protectionsurrounding the hinges and easy-open latches.Neoprene seal around the inside of the lid ensures thatthe case is completely water resistant and a pressureequalising valve can balance the atmosphere insideand out. Features a comfortable folding handle andtwin padlock points. Two pieces of wave foam and twopieces of pre-cut foam allow user to create a secureand perfect fit for the intended contents.

Model No: AP612External Size (W x D x H): 330 x 280 x 120mmInternal Size (W x D x H): 300 x 220 x 90mm



Model No. New SEE BELOW

D

E

F

JG

D F-

A C-

See previous page for our range of Cantilever Toolboxes.

Section 8 Toolboxes, TekCases & Parts Storage384

Section 8 Tool Cases 385

Professional Aluminium ToolCase Radiused Edges

Tough and stylish aluminium tool case. Perfect for themobile technician. Great for storing video/photographicequipment, games consoles and accessories.Supplied with a tool storage pallet and case dividersplus a set of two keys.

Size (W x D x H): 450 x 330 x 150mm

AModel No. AP601

A

Professional Aluminium ToolCase Square Edges

Tough and stylish aluminium tool case. Perfect for themobile technician. Great for storing video/photographicequipment, games consoles and accessories.Supplied with a tool storage pallet and case dividersplus a set of two keys.

Size (W x D x H): 450 x 330 x 150mm

BModel No. AP603

B

ABS Tool Case

Lightweight yet hard-wearing tool case with ABS shellwill not dent or bend. Ideal for the mobile technician,the interior includes removable tool storage pallet andinternal dividers. Locking catches provide addedsecurity. Supplied with two keys.

Size (W x D x H): 465 x 335 x 150mm

FModel No. AP606

F

E

Cantilever Tool Case

Professional style tool case features cantilever actionstorage trays and large, modular storage area in base ofcase. Ideal for the professional tradesman. Includes fourfull-length trays each with five storage compartmentsand six partitioned storage compartments in the base ofthe case. Locking catches provide added security .Supplied with shoulder strap and two keys.

Size (W x D x H): 450 x 225 x 500mm

EModel No. AP608

Aluminium Pilot’s Case

Superb value pilot’s case. The interior is fully lined andincludes document flaps, a business card pocket andpen holder. The programmable combination locks offeradditional security . Rounded corners are fullyprotected and the two-piece lid is attached with full-length piano hinges. Ideal for the business traveller .

Size (W x D x H): 465 x 210 x 350mm

DModel No. AP605

D

ABS Tool Cases

Lightweight yet hard-wearing tool cases with ABS shellwill not dent or bend. Ideal for the mobile technician,the interior features three, hinged, small-tool-storagesurfaces, document pockets and adjustable/removabledividers in main compartment. Locking catchesprovide security. Supplied with two keys.


G H

Model No: AP607Size (W x D x H): 475 x 365 x 185mmG Model No: AP609

Size (W x D x H): 500 x 340 x 180mmH

Professional Aluminium ToolCase Heavy-Duty

Versatile tool case with reinforced panels and foaminner lining ensuring contents are kept safe. Includesinternal movable dividers allowing case to beused for many applications i.e. tools, test devices,video/photographic equipment, games consoles andaccessories. Tool storage pallet ensures no space iswasted and can be detached if required. Two toughlockable catches for added security. Supplied with twokeys. Hands-free shoulder strap also included.

Size (W x D x H): 456 x 330 x 152mm

CModel No. New AP610

C

G H-

G H-

AP607 Illustrated

2 Door Wall Cabinet

Size (W x D x H): 825 x 305 x 608mm

AModel No. New AP02WC

A

Garage Storage System

Professional garage storage system of fers a superbcombination to kit out your workshop.Silver-grey drawers and doors with graphite grey body,give a contemporary, robust appearance which reflectsthe construction of these units.All cabinets feature outer and inner steel constructionfor extra strength and durability. Sturdy steel workbench features six legs which arestrategically placed to accept Model No’ s AP04DFCand AP22DFC under the worktop for a tidy work area.Mounting frame Model No. APMF can be bolted toworkbench (and secured to wall for safety) to allowhanging/fixing of Model No’ s AP02WC and APSPB. The workbench and two door floor cabinet both featureheight adjustable feet to ensure units sit level on most floors.Added security provided by cylinder locks, suppliedwith two keys.Perforated steel peg board for hanging tools, to ensurethey are always to hand.All items sold individually allowing you to purchase asa complete storage solution or build as you go.

4 Drawer Mobile Cabinet

Specification: W x D x HOverall Size: 710 x 360 x 838mmMedium Drawer (x3): 560 x 322 x 100mmX-Large Drawer (x1): 560 x 322 x 260mm

BModel No. New AP04DFC

B

2 Drawer Mobile Cabinetwith 2 Door Cupboard

Specification: W x D x HOverall Size: 710 x 360 x 838mmMedium Drawers (x2): 560 x 322 x 100mm

CModel No. New AP22DFC

C

2 Door Floor Cabinet

Size (W x D x H): 762 x 381 x 1666mm

DModel No. New AP02DFC

D

E

Steel Peg BoardPack of 2

Size (W x D x H): 823 x 15 x 490mm

FModel No. New APSPB

Mounting Frame

Size (W x D x H): 1648 x 40 x 2340mm

GModel No. New APMF

Workbench 1650mm

Size (W x D x H): 1650 x 509 x 945mm

EModel No. New AP165WB

F

Support structure forthe Garage StorageSystem. Simply boltsto workbench, tosupport peg board andwall cabinets.

D

BC

E

F

AA

G

Section 8 Garage Storage System386

Topchest 6 Drawer

Perfect intermediate size locking chest. Features dropcarry handles, smooth action drawer slides andcylinder lock.

Specification: Width: Depth: Height:Overall Size: 600mm 260mm 340mmSmall Split Drawer (x3): 150mm 220mm 40mmSmall Drawer (x2): 510mm 220mm 40mmMedium Drawer (x1): 510mm 220mm 80mm

CModel No. AP2201

C

Topchest & Rollcab Combination6 Drawer

The economical way to buy American PRO® qualitytoolboxes. Supplied packed one inside the other. Thismid-size combo has all the features of the professionalchests except that the cabinet is not lockableand the castors are Ø75mm. These boxes are notinterchangeable with the rest of the American Pro Range.

Specification:4 Drawer Topchest Width: Depth: Height:Overall Size: 600mm 260mm 340mmSmall Drawer (x3): 510mm 220mm 40mmMedium Drawer (x1): 510mm 220mm 80mm2 Drawer Rollcab Width: Depth: Height:Overall Size: 610mm 330mm 730mmMedium Drawer (x2): 510mm 300mm 80mm

BModel No. AP2200

B

Portable Tool Chest 3 Drawer

The storage capacity of a tool chest coupled with theversatility of a carry-type toolbox. Features two stronghasps which can be locked using a padlock (notincluded - see page 401).

Specification: Width: Depth: Height:Overall Size: 510mm 220mm 300mmMedium Drawer (x3): 500mm 210mm 65mm

AModel No. AP9243

A

6 Drawer

6 Drawer

Combination3 Drawer

American PRO® Tool Chests

Manufactured with double skin side walls for extrastrength and finished in smooth, hi-gloss, triple bakedenamel. Resists scratches, oil, dirt and most solvents.Drawers run on extending rail type runners for strengthand drawer faces have full length pulls with chromestyle trim. All chests (Except AP9243 and AP2200Rollcab) are supplied with tumbler type security lockswith two numbered keys. For mobility around theworkshop, even when fully laden, the cabinetsadditionally feature hard compound rubber castorwheels, two fixed and two locking.

Topchest & Rollcab Combination13 Drawer

The economical way to buy American PRO® qualitytoolboxes. Supplied packed one inside the other. Thiscombo has all the features of the professional chestsexcept that the castors are Ø100mm. Features lockson both the topchest and rollcab, with additional steelbars that can be locked into place to keep drawersshut. Both units have built-in storage for locking barswhen toolboxes are being used. Supplied with twokeys for each lock.Specification: Width: Depth: Height:9 Drawer TopchestOverall Size: 600mm 260mm 380mmSmall Split Drawer (x6): 150mm 220mm 35mmSmall Drawer (x2): 510mm 220mm 35mmMedium Drawer (x1): 510mm 220mm 80mm4 Drawer RollcabOverall Size: 615mm 330mm 935mmSmall Drawer (x2): 515mm 305mm 45mmMedium Drawer (x2): 515mm 305mm 80mm

DModel No. AP22513

Topchest 9 Drawer

Features drop down carry handles, smooth drawerslides, cylinder lock and, for additional security , steelbars that can be locked into place to keep drawersshut. Has built-in storage for locking bars when toolboxis in use. Supplied with two keys.


EModel No. AP22509

E

F

Rollcab 7 Drawer

Features smooth drawer slides, side handle, cylinderlock and, for additional security, steel bar that can belocked into place to keep drawers shut. Has built-instorage for locking bar when toolbox is in use. Suppliedwith two keys.

Specification: Width: Depth: Height:Overall Size: 615mm 330mm 830mmSmall Drawer (x2): 515mm 305mm 45mmMedium Drawer (x5): 515mm 305mm 80mm

FModel No. AP22507

D

9 Drawer

7 Drawer

13 Drawer

Combination

Section 8 American PRO® Tool Chests 387

®

Section 8 American PRO® Tool Chests388

Rollcab 3 Drawer

Specification: Width: Depth: Height:Overall Size: 670mm 460mm 820mmMedium Drawer (x2): 570mm 430mm 80mmLarge Drawer (x1): 570mm 430mm 100mm

BModel No. AP9203

Topchest 7 Drawer


EModel No. AP2237

American PRO® Tool Chests

Manufactured with double skin side walls for extrastrength and finished in smooth, hi-gloss, triple bakedenamel. Resists scratches, oil, dirt and most solvents.Drawers run on extending rail type runners for strengthand drawer faces have full length pulls with chromestyle trim. All tool chests are supplied with tumbler typesecurity locks with two numbered keys. For mobilityaround the workshop, even when fully laden, therollcabs additionally feature Ø125mm hard compoundrubber wheels, two fixed and two locking castors.

Add-On Chest 3 Drawer

Additional tool separation from rest of storage system.Suitable for keeping speciality tools separated fromcommon tools. Fully lockable with a keyed cylinder lock.


FModel No. AP2233

Rollcab 5 Drawer


GModel No. AP2205

Topchest 6 Drawer


AModel No. AP9206

A

B

6 Drawer

3 Drawer

Drop down covers ideal for body shop use.

E

F

G

7 Drawer

3 Drawer

5 Drawer

Heavy-duty slides fittedon all drawers.

Heavy-duty side handleson Topchest and Add-on Chest.

Smaller drawers onTopchest ideal for smallcomponents.

Rollcab fitted withØ125mm hard rubberwheels, two with lockingcastors.

Magnetic Tool Storage Tray

Heavy gauge steel construction. Powerful cushionedmagnets stick to any steel surface. Ideal for use withtoolboxes. Holds up to 3.5kg.Tray Size (W x D x H): 310 x 115 x 30mm

DModel No. APTT310

D

Magnetic Spray Gun Holder2 Gun & Hose

Heavy-duty magnetic bracket with two large magnetsthat will adhere to any ferrous surface. Compositecovering prevents scratching of surface. Suitable forstoring up to two spray guns.Size (W x H): 250 x 158mm

CModel No. MSH02

C

®

®

Section 8 American PRO® Tool Chests 389

American PRO® Ball Bearing Tool Chests

Manufactured with double skin side walls for extrastrength and finished in smooth, hi-gloss, triple bakedenamel. Ball bearing drawer runners provide superiorperformance and carry heavier loads. All boxes aresupplied with tumbler type security locks. Rollcabsfeature hard compound rubber wheels.

BA

C

Rollcab 5 Drawer with BallBearing Runners - Black

Specification: Width: Depth: Height:Overall Size: 615mm 330mm 770mmMedium Drawer (x5): 515mm 275mm 100mm

CModel No. AP2505B

Topchest 9 Drawer with BallBearing Runners - Black


BModel No. AP2509B

Topchest & Rollcab Combination13 Drawer with Ball BearingRunners - Black

Specification: Width: Depth: Height:9 Drawer TopchestOverall Size: 600mm 260mm 380mmSmall Split Drawer (x6): 150mm 220mm 35mmSmall Drawer (x2): 510mm 220mm 35mmMedium Drawer (x1): 510mm 220mm 80mm4 Drawer RollcabOverall Size: 615mm 330mm 935mmSmall Drawer (x2): 515mm 305mm 80mmMedium Drawer (x2): 515mm 305mm 80mm

A

Model No. AP2513B




Drawer SlidesDrawer Slides9 Drawer

5 Drawer

13 Drawer

Combination

F

Magnetic Tool Rail

Wall or toolbox mounting magnetic rail. Suitable for retainingfrequently used steel tools such as screwdrivers, wrenchesand pliers. Supplied with fixing screws. Tools not included.Length: 500mmWidth: 40mm

FModel No. AK211

G

Non-Slip Liner

Conceived initially for use as drawer liners for tool chestsand rollcabs. Because of its incredible non-slip design, thisunique new material has 1001 different uses. The liner isproofed against mildew , mould and moths. Use in theworkshop, garage, home, car and boat where its non-slipproperties make it indispensable. Supplied in large rolls.Roll Size: 2845 x 450mm

GModel No. AP/NSL

H

Magnetic Glove Dispenser

Dispenser attaches to any ferrous surface and can alsobe wall mounted. Four small magnets hold the dispenserin place. Suitable for packs of 50/100 disposable rubbergloves. Self-adjusting springs to hold different box sizes.Height: 254mmWidth: 146mmLength: 95mmCapacity: 50/100 Pack (Rubber Gloves)

HModel No. APGD

SSP24 notincluded

Composite Rollcab Worktop

Worktop suitable for full size American P RO® andSuperline PRO® tool chests. Convert your existing rollcabinto a mobile workstation with this useful accessory .Features robust handle, tool holders and componenttrays. Will accommodate a topchest if required and issuitable for other brands of equivalent size rollcabs.

Suitable Rollcab Dimensions:Width (Minimum/Maximum): 665/685mmDepth (Minimum/Maximum): 445/460mm

DModel No. New APRCWT

D

D

Mini Magnetic Tool Hanger

Heavy-duty magnetic tool bracket with two powerfulpermanent magnets. Supplied with two screws forfixing to non-ferrous surface. Suitable for storing toolsor leader/air hose when not in use.Size (H x W): 100 x 50mmMaximum Capacity: 5kg

EModel No. New MMTH

E

Tools not included

®

Topchest 5 Drawer withBall Bearing Runners - Red


AModel No. AP2305

Rollcab 3 Drawer withBall Bearing Runners - Red


CModel No. AP0303

D

Add-On Chest 3 Drawer withBall Bearing Runners - Red

Specification: Width: Depth: Height:Overall Size: 660mm 310mm 250mmSmall Drawer (x2): 560mm 265mm 50mmMedium Drawers (x1): 560mm 265mm 60mm

BModel No. AP2333

Topchest 5 Drawer withBall Bearing Runners - Black


DModel No. AP2305B

E

Add-On Chest 3 Drawer withBall Bearing Runners - Black

Specification: W idth: Depth: Height:Overall Size: 660mm 310mm 250mmSmall Drawer (x2): 560mm 265mm 50mmMedium Drawers (x1): 560mm 265mm 60mm

EModel No. AP2333B

Rollcab 3 Drawer withBall Bearing Runners - Black


FModel No. AP0303B

Superline PRO® Tool Chests

All steel construction and manufactured with steel innerwalls for extra strength and durability. Ball bearing drawer runners provide superior

performance and carry heavier loads. Full height rear locking mechanism locks full-length

drawers in multiple locations. Added security provided by cylinder locks. Supplied

with two keys. Recessed handles permit units to be slotted-in

in work environments where space is tight. Rust and solvent resistant powder coat paint finish. Improved access and visibility to the top tray. Rollcabs feature Ø125mm rubber wheels. Each rollcab has two castors with large toe lock

and two fixed wheels. Clamshell lid construction of topchests for improved

access and visibility.



Clamshell lid for improved access and visibility. Ball bearing drawer runners provide superior performance.

3 Drawer

5 Drawer

H



HModel No. AP2308B





GModel No. AP2308

G

MAGNETIC TRAYSSee page 402 for our range of Magnetic Trays.

A

B



3 Drawer

F 3 DrawerC 3 Drawer

8 Drawer

5 Drawer



8 Drawer

Section 8 Superline PRO® Tool Chests390

®

Section 8 Superline PRO® Tool Chests 391



EModel No. AP2306

E



AModel No. AP2310

A

F



BModel No. AP0305



FModel No. AP0306



GModel No. AP2306B

Rollcab 6 Drawer withBall Bearing Runners - Black


HModel No. AP0306B

10 Drawer

5 Drawer

6 Drawer

6 Drawer







CModel No. AP2310B

C

D

Rollcab 5 Drawer with Ball Bearing Runners - Black


DModel No. AP0305B

Rollcabs fitted with twocastors with large toelocks.

Recessed handles allowRollcabs and Topchests tobe slotted-in areas wherespace is tight.

G

H

6 Drawer

6 Drawer



5 Drawer



B

EXTRADEEP

EXTRADEEP

®

Section 8 Superline PRO® Tool Chests - Wide Body392

A C

B

Rollcab Heavy-Duty 13 Drawerwith Ball Bearing Runners

Specification: Width: Depth: Height:Overall Size: 1060mm 460mm 1090mmFull Width Drawer (x1): 930mm 410mm 90mmSmall Drawer (x4): 550mm 410mm 45mmMedium Drawer (x4): 550mm 410mm 90mmSmall 1/2 Drawer (x1): 310mm 410mm 45mmMedium 1/2 Drawer (x1): 310mm 410mm 90mmLarge 1/2 Drawer (x1): 310mm 410mm 140mmX-Large 1/2 Drawer (x1): 310mm 410mm 300mm

BModel No. AP4313

Topchest Heavy-Duty 10 Drawerwith Ball Bearing Runners

Specification: Width: Depth: Height:Overall Size: 1045mm 450mm 530mmSmall Drawer (x3): 540mm 420mm 50mmMedium Drawer (x2): 540mm 420mm 90mmSmall 1/2 Drawer (x3): 300mm 420mm 50mmMedium 1/2 Drawer (x2): 300mm 420mm 90mm

AModel No. AP4310



10 Drawer

13 Drawer

Superline PRO® Tool Chests - Wide Body

Our heaviest range of topchests and rollcabs.Manufactured to exacting standards making theseunits suitable for the professional technician.

All steel construction and manufactured with steelinner walls for extra strength and durability.

Ball bearing drawer runners provide superiorperformance and carry heavier loads.

Split drawers on all models. Full height rear locking mechanism, locks drawers

in multiple locations. Added security provided by cylinder locks.

Supplied with two keys. Recessed handles permit units to be slotted-in in

work environments where space is tight. Rust and solvent resistant powder coat paint

finish. Clamshell lid construction of topchests provides

improved access and visibility to the top tray. Topchests have a gas damper within the lid which

allows it to pop up when key is turned and keeps it open for easy accessibility.

Rollcabs feature large Ø125 x 50mm rubberwheels. Each unit having two castors with largetoe locks and two fixed wheels.

Model numbers AP4510 and AP4411 with silver-grey tread plate that contrasts with black bodyto give a contemporary, robust appearance.

Tread Plate Rollcab 11 Drawerwith Ball Bearing Runners

Specification: Width: Depth: Height:Overall Size: 1060mm 455mm1055mmFull Width Drawer (x1): 930mm 415mm 90mmSmall Drawer (x2): 555mm 415mm 45mmMedium Drawer (x5): 555mm 415mm 90mmLarge 1/2 Drawer (x2): 315mm 415mm 140mmX-Large 1/2 Drawer (x1): 315mm 415mm 300mm

DModel No. AP4411

Tread Plate Topchest 10 Drawerwith Ball Bearing Runners

Specification: Width: Depth: Height:Overall Size: 1045mm 450mm 530mmSmall Drawer (x3): 540mm 420mm 50mmMedium Drawer (x2): 540mm 420mm 90mmSmall 1/2 Drawer (x3): 300mm 420mm 50mmMedium 1/2 Drawer (x2): 300mm 420mm 90mm

CModel No. AP4510

10 Drawer

D

11 Drawer

E

Non-Slip Liner

Conceived initially for use as drawer liners for toolchests and rollcabs. Because of its incredible non-slipdesign, this unique new material has 1001 dif ferentuses. The liner is proofed against mildew, mould andmoths. Use in the workshop, garage, home, car andboat where its non-slip properties make itindispensable. Supplied in large rolls.Roll Size: 2845 x 450mm

EModel No. AP/NSL

41” EXTRA W-I-D-E 41” EXTRA W-I-D-E

®

Section 8 Superline PRO® Tool Chests - Wide Body 393

Topchest Heavy-Duty 8 Drawerwith Ball Bearing Runners

Specification: Width: Depth: Height:Overall Size: 1410mm 605mm 485mmSmall Drawer (x2): 890mm 580mm 45mmLarge Drawer (x2): 890mm 580mm 110mmSmall 1/2 Drawer (x2): 390mm 580mm 45mmLarge 1/2 Drawer (x2): 390mm 580mm 110mm

AModel No. AP5608

B

Rollcab Heavy-Duty 10 Drawerwith Ball Bearing Runners

Specification: Width: Depth: Height:Overall Size: 1420mm 610mm 990mmFull Width Drawer (x1): 1305mm 560mm 90mmMedium Drawer (x2): 865mm 560mm 65mmMedium Drawer (x2): 865mm 560mm 95mmLarge Drawer (x1): 865mm 560mm 130mmMedium 1/2 Drawer (x3): 380mm 560mm 65mmX-Large 1/2 Drawer (x1): 360mm 560mm 285mm

BModel No. AP5610

A

Our largest topchest and rollcab. Made by professionalsfor professionals. All steel construction and manufactured with steel

inner walls for extra strength and durability. Ball bearing drawer runners provide superior

performance and carry heavier loads. Split drawers for extra storage flexibility. Full height rear locking mechanism, locks drawers

in multiple locations. Added security provided by cylinder locks. Rollcab handle may be fitted to either end of unit,

increasing workshop layout options. Rust and solvent resistant powder coat paint finish. Topchest has twin gas dampers within the lid which

keep it open for easy access. Rollcab features six large Ø125 x 50mm rubber

wheels, two fixed and four castors, two of whichhave large toe locks.



8 Drawer

10 Drawer

Superline PRO® Tool Chests Extra Wide Body

Ball Bearing Runners & Drawer Liners.

Heavy-Duty Castors with Ø125 x 50mm Rubber Wheels.

Gas Dampers on Topchest Lid.

C

D

Tread Plate Topchest 5 Drawerwith Ball Bearing Runners

Specification: Width: Depth: Height:Overall Size: 660mm 400mm 470mmSmall Drawer (x4): 530mm 370mm 45mmLarge Drawer (x1): 530mm 370mm 110mm

CModel No. AP4505

Tread Plate Rollcab 5 Drawerwith Ball Bearing Runners


DModel No. AP4405



5 Drawer

Superline PRO® Tread PlateTool Chests

Silver-grey tread plate contrasts with black bodyto give a contemporary, robust appearance whichreflects the construction of the units.

All steel construction and manufactured with steelinner walls for extra strength and durability.

Ball bearing drawer and shelf runners provide superior performance and carry heavier loads.

Added security provided by cylinder locks. Supplied with two keys.

Recessed handles permit units to be slotted-in inwork environments where space is tight.

Rust and solvent resistant powder coat epoxy paint finish. Clamshell lid construction of topchest provides

improved access and visibility to the top tray. Topchest has a gas damper within the lid which

allows it to pop up when key is turned and keeps itopen for easy accessibility.

C D-A B-

56” EXTRA W-I-D-E

Section 8 Premier Ball Bearing Tool Chests394

Rollcab 4 Drawerwith Ball Bearing Runners

Specification Width: Depth: Height:Overall Size: 766mm 465mm 958mmMedium Drawer (x3): 533mm 391mm 58mmLarge Drawer (x1): 533mm 391mm 128mmLockable Cupboard (x1): 575mm 410mm 330mm



Specification Width: Depth: Height:Overall Size: 766mm 465mm 958mmMedium Drawer (x3): 533mm 391mm 58mmLarge Drawer (x2): 533mm 391mm 128mmX-Large Drawer (x1): 533mm 391mm 195mm

DModel No. New AP2406

Premier Topchests

Feature packed range of topchests for the professional.

Heavy gauge steel with double wall construction for extra strength and durability.

Ball bearing drawer runners provide superior performance and carry heavier loads.

Each drawer fitted with catch to prevent unexpected opening, when being transported around the workshop.

Added security provided by side mounted cylinder locks, supplied with two keys.

Unique design incorporates perforated side panels for hanging tools and accessories.

Ideally suited for the Premier range of themed tool trays.

Fitted with anti-shock protection on all four corners to prevent accidental damage.

Rust and solvent resistant powder coat paint finish.

Recessed handles permit topchests to be slotted into work environments where space is tight.

Topchest 4 Drawerwith Ball Bearing Runners

Specification Width: Depth: Height:Overall Size: 690mm 465mm 400mmMedium Drawer (x4): 533mm 391mm 58mm

AModel No. New AP2401

A B4 Drawer 6 Drawer

C 4 Drawer D 6 Drawer

Topchest 6 Drawerwith Ball Bearing Runners

Specification Width: Depth: Height:Overall Size: 690mm 465mm 535mmMedium Drawer (x6): 533mm 391mm 58mm


TOPCHESTS

Both Topchests will fit all Rollcabs in this series soyou can mix ‘n’ match your own combination.









Available in 4 or 6Drawer Configuration



SECURE INTERNALLOCKING SYSTEM FORADDED SECURITY

FULL WIDTH ALUMINIUM DRAWER HANDLES

POWDER COATEDFINISH FOR OUTSTANDING RUST PROTECTION

RECESSED HANDLESFOR EASY MANOEUVRABILITY

EXTRA DEEP TO MAXIMISE TOOLSTORAGE

PERFORATED SIDEPANELS FOR HANGING TOOLSAND ACCESSORIES

HEAVY GAUGE STEELWITH DOUBLE WALLCONSTRUCTION

SELF LOCKING DRAWERS PREVENTACCIDENTAL OPENING

ANTI-SHOCK RUBBERPROTECTION ON ALL4 CORNERS

Section 8 Premier Ball Bearing Tool Chests 395


Specification Width: Depth: Height:Overall Size: 766mm 465mm 958mmMedium Drawer (x6): 533mm 391mm 58mmLarge Drawer (x2): 533mm 391mm 128mm



Specification Width: Depth: Height:Overall Size: 766mm 465mm 958mmMedium Drawer (x5): 533mm 391mm 58mmLarge Drawer (x1): 533mm 391mm 128mmX-Large Drawer (x1): 533mm 391mm 195mm



Specification Width: Depth: Height:Overall Size: 766mm 465mm 958mmMedium Drawer (x10):533mm 391mm 58mm


Protective Cover for AP24Series Rollcabs

Ideal for protecting rollcab from dust and dirt when notin use. Fitted with handles for ease when removingfrom rollcab. Machine washable.

Size (W x D x H): 780 x 490 x 814mm

DModel No. New AP24ACC11

D

A

C

B

Available in 4,6, 7, 8 or 10Drawer Configuration.

HEAVY-DUTY CASTORS ±125MM



ROLLCABS HEAVY-DUTY WORKTABLEWITH VICE MOUNTING OPTION

SELF LOCKING DRAWERS PREVENT ACCIDENTAL OPENING

FULL WIDTH ALUMINIUMDRAWER HANDLES

PERFORATED SIDEPANELS FORHANGING TOOLSAND ACCESSORIES

HEAVY GAUGE STEEL WITH DOUBLE WALL CONSTRUCTION

ANTI-SHOCK RUBBERPROTECTION ON ALL 4 CORNERS

ERGONOMICMOULDED HANDLEFOR SMOOTHMANOEUVRABILITY

SECURE INTERNALLOCKING SYSTEM FORADDED SECURITY

POWDER COATEDFINISH FOR OUTSTANDING RUST PROTECTION

LOCKING BRAKE TOHELP SECURE UNITIN POSITION

Premier Rollcabs

Feature packed range of rollcabs for the professional.

Heavy gauge steel with double wall construction for extra strength and durability.

Ball bearing drawer runners provide superior performance and carry heavier loads.

Each drawer fitted with catch to prevent unexpected opening, when being transported around the workshop.

Added security provided by side mounted cylinder locks, supplied with two keys.

Unique design incorporates perforated side panels for hanging tools and accessories.

Ideally suited for the Premier range of themed tool trays.

Fitted with anti-shock protection on all four corners to prevent accidental damage.

Rust and solvent resistant powder coat paint finish.

Rollcabs feature rubber grip side handles for comfort and ease when manoeuvring with tough composite top for fitting and securing topchest or can be used as a workstation.

Each rollcab includes two Ø125mm swivel castors with large toe locks and two fixed wheels.

7 Drawer 8 Drawer

10 Drawer

All Topchest and Rollcabs in our Premier BallBearing ranges have the same draw widths anddepths making them ideal for accepting our newrange of tool trays. For full details please seepages 108 to 111 to make up your own kit or seepages 398 & 399 for our combination deals.







A B





Rear view of models AP2416 &AP2418 showing additional storagecupboard.

Both models feature a lockablefront cupboard with shelves.

Mobile Workbenches Heavy-Duty

Heavy gauge steel with double wall construction for extra strength and durability .Fitted with oversized, heavy-duty Ø160mm wheels, two fixed and two lockingcastors. Ball bearing drawer runners provide superior performance and carryheavier loads. Each drawer fitted with catch to prevent unexpected opening whenbeing transported around the workshop. Added security provided by side mountedcylinder lock. Two lockable cupboards with internal shelving for added storage.Supplied with six keys, two for drawers, four for cupboards. Rust and solventresistant powder coat paint finish. Fitted with anti-shock protection on all four cornersto prevent accidental damage. Heavy-duty metal work top makes these units verydurable and a great workstation. Unique design fitted with perforated side panels forhanging tools and accessories. For our full range of accessories see page 397.

Model No: AP2416 AP2418Total No of Drawers: 6 8Specification: Width: Depth: Height: Width: Depth: Height:Overall Size: 1130mm 565mm 1000mm 1130mm 565mm 1000mmMedium Drawer: (x3) 533mm 391mm 58mm (x6) 533mm 391mm 58mmLarge Drawer: (x2) 533mm 391mm 128mm (x2) 533mm 391mm 128mmX-Large Drawer: (x1) 533mm 391mm 195mm -


A B-

A B

Optional Accessories for AP2416 & AP2418


C

E

Mobile Workbench

Heavy steel chassis with oversized, heavy-duty Ø160mm wheels, two fixed andtwo locking castors. Includes six lockable drawers and locking cupboard with midshelf (padlocks not included - see page 401). Wooden worktop includes metal rim toprevent damage and will even accept a heavy-duty 150mm vice, see page 595.Size (W x D x H including Handle): 1070 x 595 x 920mmTotal Load Capacity: 400kgCapacity Per Drawer: 35kg

EModel No. AP1000M

See opposite page for full details.

Model No. AP24ACC3

DocumentHolder

Side Shelf

Waste Bin Can & BottleHolder

1

2Model No. AP24ACC21

Model No. AP24ACC4 Model No. AP24ACC53 4

2

3 4

Drawer Dividers

Drawer dividers suitable for all mediumor large drawers on the AP24 SeriesTopchests, Rollcabs and Workstations.Designed to keep tools and parts in aneat and easily accessible order.Model No: Size Pack

(W x D x H): Qty:AP24ACC6 3 x 395 x 58mm 1AP24ACC7 3 x 395 x 120mm 1

DD


All dr awers on our PremierBall Bearing Workstations aresuitable to accept your choiceof tool tr ays as found onpages 108 to 111.

Section 8 Premier Ball Bearing Workstations396

PerfoTool Storage Panel forAP24 Series Rollcabs

PerfoTool storage panel can be fitted to all rollcabs inour AP24 series when a topchest is not required andallows rollcab top to be used as a workbench. Fixessecurely via reinforced poles, that keep unit sturdy .Suitable for hanging some of the most frequently usedtools i.e. wrenches, ratchets, hammers, etc allowingeasy selection. Supplied with an assortment ofhanging hooks. (Tools not included).Size (W x D x H): 655 x 55 x 600mm

AModel No. New AP24ACC1

A

Side Shelf & Roll Holder forAP24 Series Tool Chests

Easy fix shelf with raised edge and paper roll holder .Ideal for small components i.e. nuts, bolts, screws andnails, helping to prevent the loss of parts and keepingwork area tidy. Roll holder underneath shelf for easyaccess to paper when required. (Paper roll and toolsnot included).Size (W x D x H): 305 x 305 x 190mm

BModel No. New AP24ACC2

B

Document Holder for AP24Series Tool Chests

Easy fix document holder. Helps keep paperwork fromgetting lost or dirty and means it is always to handwhen needed for the job. Suitable for all AP24 Seriestool chests (except AP2401).Size (W x D x H): 255 x 65 x 265mm

CModel No. New AP24ACC3

C

Waste Bin for AP24 Series ToolChests

Easy fix waste bin, allowing work area to be kept cleanand tidy. Simply lift off to empty. Suitable for all AP24Series tool chests (except AP2401).Size (W x D x H): 300 x 180 x 300mm

DModel No. New AP24ACC4

D

Hook Sets for AP24 SeriesRollcabs, Topchests & Workstations

Hook set for use with AP24 Series tool chests andaccessories with perforated panel. Suitable forhanging tools to keep them at hand when needed.

Model No. Length: Pack Qty:AP24ACC9 30mm 10AP24ACC10 60mm 10

FModel No. New SEE BELOW

Can & Bottle Holder for AP24Series Tool Chests

Easy fix can and bottle holder for storing aerosols,maintenance spray and other frequently usedproducts.Size (W x D x H): 250 x 62 x 110mm

EModel No. New AP24ACC5

E

Protective Cover for AP24 SeriesRollcabs & 4 Drawer Topchest

Ideal for protecting rollcab and topchest from dust anddirt when not in use. Fitted with handles for ease whenremoving from toolbox. Machine washable.Size (W x D x H): 780 x 490 x 1216mm

HModel No. New AP24ACC12

H

Protective Cover for AP24 SeriesRollcabs & 6 Drawer Topchest

Ideal for protecting rollcab and topchest from dust anddirt when not in use. Fitted with handles for ease whenremoving from toolbox. Machine washable.Size (W x D x H): 780 x 490 x 1354mm

IModel No. New AP24ACC13

I

Protective Cover for AP24Series Rollcabs

Ideal for protecting rollcab from dust and dirt when notin use. Fitted with handles for ease when removingfrom rollcab. Machine washable.Size (W x D x H): 780 x 490 x 814mm

GModel No. New AP24ACC11

G

F

Section 8 Tool Chest Accessories 397

Premier Line T ools for the Professional


4 Drawer Topchest - Ball Bearing Runnerswith 142pc Tool Kit

Model No. New AP2401TTC08

A

EXTRA DEEPTOPCHEST



Premier Ball Bearing 4 Drawer Topchest and themed tool tray combination, carefully hand picked by professionalsfor professionals. Tools have been selected from our Premier Line range and are covered by a lifetime warranty. Forfull details and specification of the AP2401 Topchest see page 394 and for the Themed Tool Trays see page 108 to111. Includes Tool Tray Model No's: TBT01, TBT02, TBT03, TBT04, TBT10, TBT14, TBT18, TBT20, TBT23.

7 Drawer Rollcab - Ball Bearing Runnerswith 313pc Tool Kit

Premier Ball Bearing 7 Drawer Rollcab and themed tool tray combination, carefully hand picked byprofessionals for professionals. Tools have been selected from our Premier Line range and are covered by alifetime warranty. For full details and specification of the AP2407 Rollcab see page 395 and for the Themed ToolTrays see pages 108 to 111.Includes Tool Tray Model No's: TBT01, TBT02, TBT03, TBT04, TBT07, TBT08, TBT09, TBT10, TBT14, TBT18,TBT19, TBT20, TBT21, TBT23, TBT26.

Model No. New AP2407TTC08

B

A

B 7 Drawer

4 Drawer



Section 8 Premier Ball Bearing Tool Chest Tool Kits398

X2

BlankTray

6 Drawer Topchest & 8 Drawer Rollcab Combinationwith 1231pc Tool Kit

Premier Ball Bearing 6 Drawer Topchest, 8 Drawer Rollcab and themed tool tray combination, carefully handpicked by professionals for professionals. Tools have been selected from our Premier Line range and arecovered by a lifetime warranty. For full details and specification of the AP2403 Topchest see page 394, and for theAP2408 Rollcab see page 395.Includes Tool Tray Model No's: TBT01, TBT02, TBT03, TBT04, TBT05, TBT06, TBT07, TBT08, TBT09, TBT11,TBT12, TBT13, TBT14, TBT15, TBT16, TBT17, TBT18, TBT19, TBT23, TBT24, TBT25, TBT26, TBT27, TBT28,TBT29, TBT30, TBT31, TBT32, TBTB x 2. See pages 108 to 111 for full details.

Model No. New APTTC02

A


EXTRA DEEPTOPCHEST



The three Professional Tool kits shown here are our most popular . For other options please contact our sales office or visit ou r website for further details. Alternatively why not make up your own kit. See pages 394 & 395 for details of the tool chests in our Premier Ball Bea ring Range and pages108 to 111 for details of our Professional Tool Tray inserts.

A

8 Drawer

6 Drawer

ACCESSORIESFor our full range ofoptional Accessoriesavailable for AP24Series T opchests &Rollcabs see page397.

Section 8 Premier Ball Bearing Tool Chest Tool Kit 399

Section 8 Superline PRO® Tool Chests - Stainless Steel400

Stainless Steel Rollcab 6 Drawerwith Ball Bearing Runners

Specification: Width: Depth: Height:Overall Size: 685mm 482mm 864mmSmall Drawer (x3): 570mm 440mm 47mmMedium Drawer (x1): 570mm 440mm 98mmLarge Drawer (x1): 570mm 440mm 122mmX-Large Drawer (x1): 570mm 440mm 222mm

BModel No. New AP4806S

Stainless Steel Topchest 9 Drawerwith Ball Bearing Runners

Specification: Width: Depth: Height:Overall Size: 1042mm 482mm 615mmSmall Drawer (x2): 570mm 440mm 27mmMedium Drawer (x3): 570mm 440mm 55mmSmall 1/2 Drawer (x2): 292mm 440mm 27mmMedium 1/2 Drawer (x1): 292mm 440mm 55mmLarge 1/2 Drawer (x1): 292mm 440mm 135mm

CModel No. New AP4909S

Stainless Steel Topchest 5 Drawerwith Ball Bearing Runners

Specification: Width: Depth: Height:Overall Size: 685mm 482mm 590mmSmall Drawer (x5): 570mm 440mm 47mm

AModel No. New AP4805S

A

Superline PRO® Tool Chests

Distinctive and practical professional range of heavy-duty topchests and rollcabs, manufactured from 19gauge 430 Stainless Steel. Standard and Extra Widewidths, offer maximum tool storage capacity for theprofessional mechanic. Stainless Steel construction with inner steel walls

for extra strength and durability. Ball bearing drawer runners provide superior

performance. Deep drawers on AP4911S have double runners for increased load capacity.

Split drawers on AP4909S and AP4911S for extra storage flexibility.

Topchest and Rollcab supplied with interlocking zipable covers.

Full height rear drawer locking mechanism. Added security provided by cylinder locks.

Supplied with two keys. All drawers equipped with non-slip liners. Topchest lid supplied with gas hydraulic struts,

providing good access to the top tray. Rollcabs feature Ø127 x 38mm rubber wheels -

two braked castors and two fixed wheels.

Stainless Steel Rollcab 11 Drawerwith Ball Bearing Runners

Specification: Width: Depth: Height:Overall Size: 1042mm 482mm 1044mmFull Width MediumDrawer (x1): 931mm 440mm 80mmSmall Drawer (x1): 570mm 440mm 27mmMedium Drawer (x3): 570mm 440mm 55mmLarge Drawer (x2): 570mm 440mm 140mmSmall 1/2 Drawer (x1): 292mm 440mm 27mmMedium 1/2 Drawer (x1): 292mm 440mm 55mmLarge 1/2 Drawer (x1): 292mm 440mm 135mmX-Large 1/2 Drawer (x1): 292mm 440mm 300mm

DModel No. New AP4911S

B

D

5 Drawer

6 Drawer

9 Drawer

11 Drawer



C



Both AP4805S and AP4806S are supplied withtheir own protective cover. These can be joinedto make one large co ver if you are using theTopchest and Rollcab together.

Both AP4909S and AP4911S are suppliedwith their own protective cover. These can be joinedto mak e one large co ver if y ou are usingthe Topchest and Rollcab together.

41” EXTRA W-I-D-E

®

Magnetic Tool Storage Tray

Heavy gauge steel construction. Powerful cushionedmagnets stick to any steel surface. Ideal for use withtoolboxes. Holds up to 3.5kg.Tray Size (W x D x H): 310 x 115 x 30mm

AModel No. APTT310

A

A

Magnetic Spray Gun Holder2 Gun & Hose

Heavy-duty magnetic bracket with two large magnetsand will adhere to any ferrous surface. Compositecovered magnets material prevents scratching ofsurface. Suitable for storing up to two spray guns.

Size (H x W): 158 x 250mm

BModel No. MSH02

B

Magnetic Impact Tool Tidy

Heavy-duty magnetic tool bracket with four powerfulpermanent magnets. Suitable for storing impactwrench, sockets and leader/air hose when not in use.

Size (H x W): 355 x 134mmMaximum Capacity: 15kg

EModel No. MIT

E

Composite Rollcab Worktop

Worktop suitable for full size American Pro andSuperline Pro tool chests. Convert your existing rollcabinto a mobile workstation with this useful accessory .Features robust handle, tool holders and componenttrays. Will accommodate a topchest if required and issuitable for other brands of equivalent size rollcabs.

Suitable Rollcab Dimensions:Width (Minimum/Maximum): 665/685mmDepth (Minimum/Maximum): 445/460mm

FModel No. New APRCWT

F

G H I

* Except PBC20

Brass Cylinder Padlocks Extra-Long Shackle

Extruded brass body. Extra-long, hardened and platedsteel shackle. Brass cylinder with twin-locking shackle.Supplied with two keys.

Model No: Body Width: Shackle: Internal W/Ht:PBCL40 40mm Ø6.0mm 20/58mmPBCL50 50mm Ø8.0mm 27/65mmPBCL60 60mm Ø9.0mm 32/70mm

Brass Cylinder Padlocks

Extruded brass body with hardened and plated steelshackle. Brass cylinder with twin-locking shackle*offers superior security. Supplied with three keys.Model No: Body Width: Shackle: Internal W/Ht:PBC20 20mm Ø3.5mm 10/13mmPBC30 30mm Ø5.0mm 15/19mmPBC40 40mm Ø6.0mm 21/21mmPBC50 50mm Ø9.0mm 25/29mm


HModel No. SEE BELOW

Laminated Steel Padlocks

Laminated steel padlock with single locking shackle.Hardened and plated steel shackle construction. Brasscylinder. Fitted with composite bumper ring. Suppliedwith two keys.Model No: Body Width: Shackle: Internal W/Ht:PLS30 30mm Ø5.0mm 15/17mmPLS40 40mm Ø6.0mm 21/24mmPLS50 50mm Ø9.0mm 24/28mm

IModel No. SEE BELOW

Mini Magnetic Impact Tool Tidy

Heavy-duty magnetic tool bracket with two powerfulmagnets holding up to 9kg. Wall mountable to allow fora more permanent fixing with higher weight capacity .Suitable for storing an impact wrench when not in use.

Size (H x W): 100 x 105mmMaximum Capacity: 9kg

DModel No. New MMIT

D

Mini Magnetic Tool Hanger

Heavy-duty magnetic tool bracket with two powerfulpermanent magnets. Supplied with two screws forfixing to non-ferrous surface. Suitable for storing toolsor leader/air hose when not in use.Size (H x W): 100 x 50mmMaximum Capacity: 5kg

CModel No. New MMTH

C

Section 8 Tool Chest Accessories & Padlocks 401

Section 8 Tool Chest Accessories402

A

Non-Slip Liner

Conceived initially for use as drawer liners for tool chestsand rollcabs. Because of its incredible non-slip design, thisunique new material has 1001 different uses. The liner isproofed against mildew , mould and moths. Use in theworkshop, garage, home, car and boat where its non-slipproperties make it indispensable. Supplied in large rolls.

Roll Size: 2845 x 450mm

AModel No. AP/NSL

D

G H

Magnetic Socket Holder Rails

Tidy storage for loose sockets on steel rails, attaches to any ferrous surface, can also be wall mounted. Supplied with3 packs containing 10 socket clips each, suitable for retaining 1/4”, 3/8” and 1/2”Sq drive sockets. Use with multiple orsingle size clips.Model No: AK27081 AK27091Length: 200mm 300mmSocket Range: 1/4”, 3/8”, 1/2”Sq Drive 1/4”, 3/8”, 1/2”Sq Drive

Model No. SEE BELOW

E

Magnetic Collection Tray240 x 140mm

Stainless steel tray with 2 x Ø80mm magnets in non-marking cover. Ideal for storing nuts, bolts, screws,washers and sockets during disassembly/assembly .Attaches to any ferrous surface and even works upsidedown. Ideal for dismantlers, recovery vehicles and enginerebuilders.Tray Size: 240 x 140mmNumber of Magnets: 2

EModel No. AK2312

F

Magnetic Collection Tray290 x 275mm

Stainless steel tray with 4 x Ø80mm magnets in non-marking cover. Ideal for storing nuts, bolts, screws,washers and sockets during disassembly/assembly .Attaches to any ferrous surface and even works upsidedown. Ideal for dismantlers, recovery vehicles and enginerebuilders.Tray Size: 290 x 275mmNumber of Magnets: 4

FModel No. AK2314

I

Magnetic Tool Rail500mm

Wall or toolbox mounting magnetic rack. Suitable forretaining frequently used steel tools such asscrewdrivers, wrenches and pliers. Supplied with fixingscrews. Tools not included.Length: 500mmWidth: 40mm

IModel No. AK211

C

Magnetic Glove Dispenser

Dispenser attaches to any ferrous surface and can alsobe wall mounted. Four small magnets hold the dispenserin place. Suitable for packs of 50/100 disposable rubbergloves. Self-adjusting springs to hold different box sizes.Height: 254mmWidth: 146mmDepth: 95mmCapacity: 50/100 Pack (Rubber Gloves)

CModel No. APGD

SSP24 notincluded

G H

G H-

Magnetic Collection BowlØ150mm

Stainless steel bowl with Ø80mm magnet in non-marking cover. Ideal for storing nuts, bolts, screws,washers and sockets during disassembly/assembly .Attaches to any ferrous surface and even works upsidedown. Ideal for dismantlers, recovery vehicles andengine rebuilders.Bowl Size: Ø150mmNumber of Magnets: 1

DModel No. AK231

Sharks Teeth Wrench Rack

Durable composite sharks teeth wrench rack helpsmaintain an organised topchest/rollcab. 425mm Longtwo piece set holds up to 20 wrenches. Two adhesivestrips included.

Length: 425mmContents: 2pc Wrench Rack, 2 x Adhesive Strips

BModel No. New WR01

B

Tools not included.

Section 8 Tool Chest Accessories 403

A

Socket Retaining Rail Set 3pc

410mm Rails each fitted with sixteen adjustable socketclips. Drilled rails allow wall mounting or cabinet fixing.

Contents: 1 each; 1/4”, 3/8”, 1/2”Sq Drive Rail withRetaining Clips

BModel No. AK270

B

Socket Retaining Rails

Durable composite sliding socket rails. Size printeddirectly on each individual socket clip for easyselection. Available in three sizes.Model No: Drive: Socket Size/Capacity:

AK1412 1/4”Sq 4-13mm/12AK3812 3/8”Sq 8-19mm/12AK1217 1/2”Sq 8-24mm/17

D


E

1

2

3

1/4”Drive

3/8”Drive

1/2”Drive

1/4”Drive

3/8”Drive

1/2”Drive

Socket Holders

Allows you to maintain a tidy workstation and alwayshave sockets to hand. Accommodates both standardand deep sockets. Model No: Drive: Socket Size/Capacity:

SH1414 1/4”Sq 4-15mm/28SH3815 3/8”Sq 6-20mm/30SH1217 1/2”Sq 10-27mm/34

Model No. SEE BELOW

E

Socket Rail Tray 1/4”, 3/8” & 1/2”Sq Drive

Steel panel comprising four 220mm rails and clipssuitable for retaining 1/4”, 3/8” and 1/2”Sq drivesockets. Fitted with carry handle.Tray Size: 220 x 152mm

FModel No. AK2712

F


Steel panel comprising of four 430mm rails and clipssuitable for retaining 1/4”, 3/8” and 1/2”Sq drivesockets. Fitted with carry handle.Tray Size: 430 x 157mm

GModel No. AK271

G


Steel tray comprising of five 430mm rails and clipssuitable for retaining 1/4”, 3/8” and 1/2”Sq drivesockets. Also includes two 10pc power driver bitholders. Tray features carry handles and hangingholes for workshop storage.Tray Size: 490 x 210mm

HModel No. AK272

H

3

1

2

3

12

3

1

2

123

1/4”Drive

3/8”Drive

1/2”Drive

Socket Retaining Rails

Tidy storage for loose sockets. Carry rail to the job ormount onto wall or toolbox. Handle marked with drivesize. Supplied with 14 socket clips.Model No: Drive: Length:

AK1414 1/4”Sq 420mmAK3814 3/8”Sq 420mmAK1214 1/2”Sq 420mm


3

12

Modular Socket Retaining Bars1/4”, 3/8” & 1/2”Sq Drive

Tidy storage for sockets with sliding clips on compositerails. Rails can be extended by joining modularsections to achieve desired length. Can be wall ortoolbox mounted. Supplied with 3 x 10 socket clips forretaining 1/4”, 3/8” and 1/2”Sq drive sockets. Use withmixed or single size clips.Modules: 50mm (5pc), 100mm(3pc), 75mm EndPieces (6pc)Socket Clips: 10 each; 1/4”, 3/8”, 1/2”Sq Drive

CModel No. AK27050

C

1/4”, 3/8” & 1/2” Drive 1/4”, 3/8” & 1/2” Drive

1/4”, 3/8” & 1/2” Drive1/4”, 3/8” & 1/2” Drive1/4”, 3/8” & 1/2” Drive

D

Section 8 Workshop Trolleys404

G

A B

Adjustable HeightMobile Workstation

Table is fully adjustable in height and can rotate 360° whilebase remains static. Features two-section table, one largefor main workpiece and a smaller section for accessories.Rubber lining on the table helps prevent damage to theunit and workpiece. Suitable for use in workshops andwarehouses. Supplied with four castor wheels. Minimum Height: 875mmMaximum Height: 1250mmTable Size (W x D): 740 x 455mmCapacity: 25kg

GModel No. AP200

2-Level Extra Heavy-Duty WorkshopTrolley with Lockable Drawer

Garage or workshop trolley with each shelf having acapacity of 80kg. Deep-walled shelves, each of whichmay be installed base down or base up to give eithertool and component security or unobstructed access.Full-width, lockable drawer with ball bearing slides.Four large castors, two locking.Size (W x D x H): 760 x 410 x 900mmDrawer (x1) (W x D x H): 680 x 375 x 75mmCapacity: 80kg/Level

CModel No. CX101D

C

2-Level Extra Heavy-Duty Trolleywith Lockable Top & 2 Drawers

Garage or workshop trolley with each shelf having acapacity of 80kg. Upper shelf has liner and lockabletop, lower shelf may be installed base down or baseup to give either tool and component security orunobstructed access. Two lockable drawers, with ballbearing slides and liners, give additional tool security.Four large castors, two locking.Size (W x D x H): 815 x 430 x 985mmDrawer (x2) (W x D x H): 680 x 375 x 75mmCapacity: 80kg/Level

EModel No. CX1042D

E

2-Level Extra Heavy-Duty Trolleywith Lockable Top

Garage or workshop trolley with each shelf having acapacity of 80kg. Upper shelf has liner and lockabletop, lower shelf may be installed base down or baseup to give either tool and component security orunobstructed access. Four large castors, two locking.

Size (W x D x H): 815 x 410 x 985mmCapacity: 80kg/Level

DModel No. CX104

D

3-Level Extra Heavy-DutyWorkshop Trolley

Garage or workshop trolley with each shelf having acapacity of 80kg. Deep-walled shelves, each of whichmay be installed base down or base up to give eithertool and component security or unobstructed access.Four large castors, two locking.Size (W x D x H): 760 x 410 x 900mmCapacity: 80kg/Level

BModel No. CX103

2-Level Extra Heavy-DutyWorkshop Trolley

Garage or workshop trolley with each shelf having acapacity of 80kg. Deep-walled shelves, each of whichmay be installed base down or base up to give eithertool and component security or unobstructed access.Four large castors, two locking.Size (W x D x H): 760 x 410 x 900mmCapacity: 80kg/Level

AModel No. CX102

3-Level Heavy-Duty WorkshopTrolley

Tubular steel frame with powder coated finish forstrength and durability . Moulded high densitypolyethylene shelving with double skin allowscombined capacity of up to 90kg when fullyassembled. Resistant to oil, grease and brake fluid.Includes two locking castors. Suitable for a variety ofworkshop and body shop applications.Size (W x D x H): 565 x 395 x 810mmCapacity: 30kg/Level

FModel No. CX208

F







Model No’ s CX101Dand CX1042D are bothfitted with ball bearingdrawer slides.

Section 8 Workshop Trolleys & Mobile Workbenches 405

2-Level Heavy-Duty Workshop Trolley

Ideal for regularly used workshop items such as body repair kits, power tools andbulky equipment too big for a tool chest. Strong build quality and extra large castorsmake these excellent dismantling trolleys for smaller vehicle components.Type: 2-Level TrolleySize (W x D x H): 890 x 420 x 895mmCapacity: 50kg/Level

EModel No. CX105

E F

3-Level Heavy-Duty Workshop Trolley

Ideal for regularly used workshop items such as body repair kits, power tools andbulky equipment too big for a tool chest. Strong build quality and extra large castorsmake these excellent dismantling trolleys for smaller vehicle components.Type: 3-Level TrolleySize (W x D x H): 890 x 420 x 895mmCapacity: 50kg/Level

FModel No. CX108

A

Mobile Workbench with Oil Drain

Sturdy steel construction with powder coated finish to prevent corrosion. Angledworktop to one drain point makes this ideal for working on engines, transmissions,gearboxes or hydraulic systems. All fluids drain into special removable polyethylenecontainer. Features lockable drawer on smooth ball bearing runners and fourcastors, two locking.Size (W x D x H): 1200 x 800 x 900mm

CModel No. AP1200M

C

Mobile Tool & Parts Trolley

Heavy gauge steel construction with lockable sliding top on smooth ball bearingrunners. Two drawers with ball bearing slides, which are locked when top isclosed. Handle and oddments tray at each end. Two fixed wheels and two lockingcastors. Suitable for tools and parts. Some self assembly required.Size (W x D x H): 920 x 535 x 950mmTotal Load Capacity: 150kg

AModel No. AP920M

Extra Heavy-Duty Trolley 2-Level with 4 Drawers& Cantilever Trays

Garage or workshop trolley with an overall capacity of 150kg. Lined upper shelf hasfour cantilever trays and a lockable top with gas sprung centre support. Lined lowershelf is ideal for larger parts or tools storage. Four drawers with liners and ballbearing runners, feature a rear locking mechanism which engages when lid isclosed giving added security . Fitted with four large swivel castors, two locking.Capacity: 150kgSpecification (W x D x H):Overall Size: 787 x 445 x 965mmLower Tray: 775 x 406 x 75mmUpper Tray: 775 x 406 x 105mmChest Overall: 686 x 394 x 280mmMedium Split Drawer (x2): 317 x 368 x 51mmMedium Drawer (x1): 660 x 368 x 76mmLarge Drawer (x1): 660 x 368 x 101mm

BModel No. New AP930M

B





Deluxe Mechanic Seatwith 3 Drawers

Heavy steel framework with powder-paint finish. Easy rolling Ø60mm rubbercastors with ball bearing swivel.Features a three drawer cabinet withball bearing runners for easy access oftools and components whilst working.

Overall Size (W x D x H):405 x 465 x 430mmDrawer (x3) (W x D x H):320 x 195 x 58mm

D

D

Model No. New SCR9D

D

Wall Mounting Tool Storage Cabinet

Double skinned construction and heavy-duty double locking system. Combination oftool and bin storage. Supplied with two keys.Size (W x D x H): 920 x 300 x 720mm

DModel No. TTS4

Steel Workbench with 2 Drawers Wooden Top 1.2mtr

Worktop has metric scale along front edge, plus protractor . Pegboard rear panelwith hooks for convenient tool storage. Two half drawers, with ball bearing slides, fullsize shelf below worktop and 230mm shelf above pegboard.Size W x D x H (Overall/Worktop) : 1210 x 610 x 1560/910mm

BModel No. AP12600

B

1.5mtrTable Width

2.0mtrTable Width

Available in:

Steel Workbenches Wooden Top

Manufactured using 20mm thick hardwood surface with epoxy coated steel frame.Available in two sizes.Model No: Size (W x D x H):AP1215 1500 x 700 x 830mmAP1220 2000 x 700 x 830mm


1.5mtrTable Width

2.0mtrTable Width

Available in:

E

Steel Workbenches Wood Laminate Top

35mm Thick wood composite top, with beech-ef fect laminate, and epoxy coatedsteel frame. Available in two sizes.Model No: Size (W x D x H):AP0615 1500 x 610 x 880mmAP0620 2000 x 610 x 880mm

E

F

Model No. SEE BELOW

C

Steel Workbench Beech Top1.5mtr

Manufactured using 36mm thick beech wood worktop with sturdy steel frame.Suitable for use in all workshops.Size (W x D x H): 1500 x 700 x 915mm

CModel No. AP0715

1.5mtrTable Width



Steel Workbenches Wooden Top

Fully painted steel frame with wooden worktop and shelf. No nuts and bolts, means notools required to assemble. Workbench clips together in minutes. Available in two sizes.Model No: Maximum Capacity Per Level: Size (W x D x H):AP1210 100kg 1210 x 610 x 900mmAP1535 200kg 1535 x 620 x 920mm

AModel No. New SEE BELOW

A

1.2mtrTable Width

1.5mtrTable Width

Available in:

1.2mtrTable Width

Section 8 Workbenches406

Made in

C

Steel Top Workbenches with Drawer

Supplied with a single, lockable drawer. Manufactured throughout from steel platefor industrial durability and finished in red gloss to prevent corrosion. Includesbottom shelf for additional storage.Model No: Size (W x D x H):AP1010 1000 x 650 x 860mmAP1015 1500 x 650 x 860mmAP1020 2000 x 650 x 860mm

Model No. SEE BELOW

1.0mtrTable Width

1.5mtrTable Width

2.0mtrTable Width

Single drawer unit supplied as standard.

C

Available in:

B

Single Drawer Unit for AP10 &AP30 Series Benches

Optional unit for added drawer space on any of theAP10 and AP30 Series workbenches. Manufacturedwith steel plate for industrial durability and finished inred gloss to prevent corrosion. Lockable drawer, whichcan be installed on the left or right of the workbench.Drawer Size (W x D x H): 340 x 525 x 120mm

DModel No. AP1

D E

VICESWe stock a comprehensive

range of Cast Iron and All-Steel Vices - see page

595 for full details.

3 Drawer Unit for AP10 & AP30Series Benches

Optional unit for added drawer space on any of theAP10 and AP30 Series workbenches. Manufacturedwith steel plate for industrial durability and finished inred gloss to prevent corrosion. Lockable drawers, whichcan be installed on the left or right of the workbench.Drawer Size (W x D x H): 340 x 525 x 120mmOverall Size (W x D x H): 400 x 575 x 535mm

EModel No. AP3

AWorkstation with Drawer & Cupboard1.2mtr

Workstation consisting of wooden worktop bench and wall mounting cabinet.Features one drawer, one deep cupboard, two slim cupboards, metal pegboard andopen storage space with a removable shelf depending on space required. Allcupboards are lockable. Supplied with 20 hanging hooks. Ideal for keeping all toolsclose to hand while at work.Workbench Size (W x D x H): 1200 x 600 x 860mmCabinet Size (W x D x H): 1200 x 200 x 610mm

Model No. AP2060

A

A

Single drawer unit supplied as standard.

2.0mtrTable Width

1.2mtrTable Width

Steel Top Workbench with Drawer 2mtr

Manufactured throughout in 3mm steel plate for industrial durability and finished inred gloss to prevent corrosion. Supplied with single lockable drawer, which can beinstalled on the left or right of the workbench. Includes bottom shelf for additionalstorage.

Size (W x D x H): 2000 x 650 x 865mm

Model No. AP3020

B

Section 8 Workbenches 407

Heavy-Duty Workbench with Cupboard

Powder coated steel panels with 40mm wood laminate top. Features lockablecupboard with 6-pin tumbler lock and two keys. Supplied flat packed.Table Size (W x D): 1372 x 508mmWorking Height: 865mmCapacity: 250kg

CModel No. AP2010

C

Heavy-Duty Workbenches with 5 Drawers

Powder coated steel panels with 40mm wood laminate top. Five drawers, availablewith either friction slide runners or ball bearing runners for superior performance. Open shelving for storage of larger items. Supplied flat packed.

Model No: Drawer Slides: Table Size Working Capacity:(W x D): Height:

AP2030 Friction 1372 x 508mm 865mm 250kgAP2030BB Ball Bearing 1372 x 508mm 865mm 250kg


D

B

Heavy-Duty Workstations with 5 Drawers

Powder coated steel panels with 25mm wood laminate top. Five drawers, availablewith either friction slide runners or ball bearing runners for superior performance.Supplied flat packed.Model No: Drawer Slides: Table Size Working Capacity:

(W x D): Height:AP2050 Friction 838 x 508mm 865mm 250kgAP2050BB Ball Bearing 838 x 508mm 865mm 250kg


A

Supplied with or without

See Below




See Below




See Below



Heavy-Duty Workbenches with 2 Drawers

Powder coated steel panels with 40mm wood laminate top. Two drawers, availablewith either friction slide runners or ball bearing runners for superior performance.Open storage space for larger items. Supplied flat packed.Model No: Drawer Slides: Table Size Working Capacity:

(W x D): Height:AP2020 Friction 1372 x 508mm 865mm 250kgAP2020BB Ball Bearing 1372 x 508mm 865mm 250kg


Woodworking Bench with Drawer1.52mtr

Made from birchwood with a varnished finish. Features tool well, shelf, tool drawer,front and end vices, four metal bench stops and four wooden board jacks.

Overall Dimensions (W x D x H): 1520 x 620 x 850mmWorktop: 1390 x 355mmTool Well: 1340 x 113mmDrawer: 330 x 320 x 75mmVice (x2): 280mm Wide x 190mm OpeningWeight: 27kg

EModel No. AP1520

E

Section 8 Workbenches408

E

A

Locker - 3 Compartment

Boltless locker system suitable for a wide variety ofcommercial applications. Three-compartmentconfiguration - dirty and clean compartments withhanger bar and top shelf. Ventilated door with cylinderlock. Supplied flat packed. For add-on lockers orderModel No. AP18040E Extension Pack whichincorporates one side panel only.

Size (W x D x H): 400 x 500 x 1800mmExtension Pack: AP18040E

BModel No. AP18040

B

Flammables Storage Cabinet 915 x 460 x 915mm

Sturdy metal construction with yellow powder coat andBS5378 warning signs. Two door, fitted with two-point keylock and supplied with two keys. Features two adjustable,lipped shelves and liquid-tight base to retain spills. Illustratedwith optional floor stand, Model No. FSC02ST.Shelves: 2Size (W x D x H): 915 x 460 x 915mm

DModel No. FSC02

D

Floor Stand for FSC02

Sturdy metal stand to support FSC02.Size (W x D x H): 915 x 465 x 445mm

EModel No. FSC02ST


Sturdy metal construction with yellow powder coat andBS5378 warning signs. Two door, fitted with two-pointkey lock and supplied with two keys. Features threeadjustable, lipped shelves and liquid-tight base toretain spills.155mm raised, leak-proof, door sill.Shelves: 3Size (W x D x H): 915 x 460 x 1830mm

FModel No. FSC03

F

Locker - 2 Compartment

Boltless locker system suitable for a wide variety ofcommercial applications. Single locker configurationwith clothes hanger bar and ventilated door withcylinder lock. Supplied flat packed. For add-on lockersorder Model No. AP18030E Extension Pack whichincorporates one side panel only.

Size (W x D x H): 300 x 500 x 1800mmExtension Pack: AP18030E

AModel No. AP18030

Lockers illustrated above with optional extension packs.

Floor Cabinet 2 Door

Use as an individual storage unit. Featuring two largedoors, four shelves and base storage. Added securityprovided by cylinder lock, supplied with two keys. Allsteel construction, stabilized by an inner crossmember. Supplied flat packed to save freight cost,simple assembly required.

Size (W x D x H): 915 x 457 x 1981mm

CModel No. New SC01

C

Section 8 Lockers & Flammables Storage Cabinets 409

Technical Parts Storage

Our TPS range gives you the versatility to build up astorage system according to the wall space available.All panels are the same height, only the widths vary .The heavy gauge steel back panels are made in theUK and will withstand years of hard use. Panels arepacked and priced in pairs. Order storage binsseparately, available in seven sizes.

Model No: TPS6 TPS7 TPS8Width: 500mm 1000mm 1500mmHeight: 500mm 500mm 500mm

Model No. SEE BELOWA B C

A

A

B C

A C-

B C

Bins and contents not included.

DPerfoTool Storage Panels

Tool storage panels, available in three sizes.Model No: Size (W x H): Pack Qty:TTS05 500 x 500mm 2TTS1 1000 x 500mm 2TTS2 1500 x 500mm 2


Tool Hooks & StorageAccessories

Choose from our comprehensive range. All hooks andaccessories latch into the panel holes and can be secured quickly and effectively with retaining clips supplied.


Model No: Description: Pack Qty:TTS25 Ø100mm Pipe Bracket Pack of 2 TTS26 Wrench Holder - Capacity 8 Wrenches SingleTTS27 Power Tool Holder Ø40mm Pack of 2TTS28 Power Tool Holder Ø60mm Pack of 2TTS29 Power Tool Holder Ø80mm Pack of 2TTS30 Hex Key Holder SingleTTS32 Plastic Bin Holder Strip 450mm SingleTTS33 Pliers Hook 36mm Pack of 5 TTS34 Pliers Hook 50mm Pack of 5 TTS35 Socket Holder - Capacity 6 1/2”Sq Drive SingleTTS38 Hook Kit - Suitable for RE83/10 Kit of 26TTS39 Hacksaw Holder - Capacity 3 Hacksaws SingleTTS40 Storage Tray for Perfo Panel 225 x 175 x 65mm SingleTTS41 Storage Tray for Perfo Panel 450 x 175 x 65mm SingleTTS42 Screwdriver Unit - Capacity 7 Screwdrivers Single

Model No: Description: Pack Qty:TTS6 Tool Hooks - Suitable for 1mtr of Tool Storage Kit of 20 TTS7 Tool Hooks - Suitable for 1.5mtr of Tool Storage Kit of 30TTS8 Tool Hooks - Suitable for 3mtr of Tool Storage Kit of 60TTS9 10mm Spring Clip Pack of 5 TTS10 13mm Spring Clip Pack of 5 TTS11 16mm Spring Clip Pack of 5 TTS12 19mm Spring Clip Pack of 5 TTS13 25mm Spring Clip Pack of 5 TTS14 28mm Spring Clip Pack of 5 TTS15 25mm Single Prong Hook - Vertical End Pack of 5TTS16 50mm Single Prong Hook - Vertical End Pack of 5TTS17 75mm Single Prong Hook - Vertical End Pack of 5TTS20 25mm Double Prong Hook - Angled End 30mm Gap Pack of 5TTS21 50mm Double Prong Hook - Angled End 30mm Gap Pack of 5TTS22 75mm Double Prong Hook - Angled End 30mm Gap Pack of 5TTS24 Ø60mm Pipe Bracket Pack of 2

Spring Clip

Hacksaw Holder

Hex Key Holder

Storage Tray 450mm

Plastic Bin Strip Holder

Pliers Hook36mm

Socket Holder 6pc Capacity

Storage Tray 225mm

Single Hook Pipe Bracket Power Tool Holder Spanner Holder

Screwdriver Holder

Double Hook

Hooks and tools not included.

Section 8 Wall Systems & Storage410

E E

Mobile Bin Storage System with94 Bins

Powder coated steel racking with plastic storage binspositioned evenly on both sides. Mounted on fourheavy-duty castors (two lockable) for mobility.Racking Dimensions (W x D x H): 940 x 500 x 1245mmBin Dimensions (W x D x H): 110 x 160 x 75mm

150 x 235 x 125mmBin Quantities: 64 x Small, 30 x LargeWeight: 33kg

GModel No. TPS94

Bin & Panel Combinations

The most economical way to buy storage. Storage binsfrom our standard range mounted onto compositeback panels.Model No: Pack Size: Contents:

TPS9 6 Sets 12 x TPS2 Bins+ Panel

TPS9S 1 Set 12 x TPS2 Bins+ Panel

TPS10 8 Sets 9 x TPS1 Bins6 x TPS2 Bins

+ PanelTPS10S 1 Set 9 x TPS1 Bins

6 x TPS2 Bins+ Panel

Model No. SEE BELOW

A B-

C

BA

3

45

STORAGE BINS Our range of storage bins and panels is ideal for storing all types of products from MIG accessories (illustrated above), sockets and bits to jewellery . Thewide range of panel sizes helps make the most of youravailable wall space, giving you a place for everythingand keeping your workplace uncluttered.

1 2

7

6

Storage Bins

Manufactured from shock-proof polymer which is resistant to mild acids, solvents and oils. Bins have a highthermal stability and resist damage from extremes of temperature. Available in case quantities only.

Model No: Case Qty: Size (W x D x H):TPS1 100 103 x 85 x 53mmTPS2 48 105 x 165 x 83mmTPS3 38 148 x 240 x 128mmTPS4 20 209 x 356 x 164mmTPS5 12 310 x 500 x 190mmTPS2D 28 103 x 240 x 83mmTPS3D 16 145 x 335 x 125mm


1234567

Panel TPS1 TPS2 TPS3 TPS4 TPS5Model No: TPS2D TPS3D

TPS6 20 16 9 4 2TPS7 48 32 18 8 6TPS8 72 48 30 14 8

The table above indicates how many storagebins can be attached to the various sizes of panel.

G

A

A

B

B

Bin Storage System with 47 Bins

Powder coated steel racking with plastic storage binspositioned evenly on one side.Racking Dimensions (W x D x H): 940 x 285 x 1145mmBin Dimensions (W x D x H): 110 x 160 x 75mm,

150 x 235 x 125mmBin Quantities: 32 x Small, 15 x LargeWeight: 22kg

FModel No. New TPS47

F

Section 8 Parts Storage 411

Composite Pegboard 2pc

Wall-mounted quality composite pegboard. Completewith an 18pc assorted hook set. Additional hooksavailable, Stock Code S0766.Overall Size (H x W): 495 x 615mm Individual Board Size (H x W): 495 x 306mm

Replacement Hook Set: S0766Contents: 2 x Small Rings, 3 x Large Rings,5 x Curved, 11 x Short, 2 x Long, 7 x Twin

DStock Code S0765

D

E

E

Cabinet Box 20 Drawer

Professional quality steel frame cabinet for use in theworkshop. Complete with 20 tough polypropylenedrawers which can be sub divided into smallercompartments with dividers (not included). Can be wallmounted or used free standing.

Specification: Width: Depth: Height:Overall Size: 307mm 147mm 285mmSmall Drawer (x15): 50mm 135mm 35mmMedium Drawer (x4): 64mm 135mm 56mmLarge Drawer (x1): 270mm 135mm 56mm

AModel No. APDC20

A

Cabinet Combi Box 18 Drawers & 4 Bins

Tough and durable case. Contains 18 impact resistantpolypropylene drawers and 4 storage bins. Ideal forstoring a mixture of small and large fixings andcomponents etc. Fitted with four fixing points for wallmounting.

Specification: Width: Depth: Height:Overall Size: 300mm 163mm 478mmSmall Compartment (x15): 54mm 130mm 35mmMedium Compartment (x2): 133mm 130mm 35mmLarge Compartment (x1): 270mm 130mm 35mmStorage Bin (x4)*: 139mm 157mm 83mm*External measurements

BModel No. APDC22

B

Cabinet Box 44 Drawer

Professional quality steel frame cabinet for use in theworkshop. Complete with 44 tough polypropylenedrawers which can be sub divided into smallercompartments with dividers (not included). Can be wallmounted or used free standing.

Specification: Width: Depth: Height:Overall Size: 307mm 147mm 510mmSmall Drawer (x40): 50mm 135mm 35mmMedium Drawer (x3): 85mm 135mm 56mmLarge Drawer (x1): 270mm 135mm 56mm

CModel No. APDC45

C

Drawer Dividers

Drawer Dividers for APDC20 and APDC45.

Model No: Pack Qty:APDC01 30 x SmallAPDC02 10 x Small, 3 x Medium, 2 x Large

DNOT ILLUSTRATED

Metal Cabinet Box 25 Drawer

Professional quality steel construction for use inworkshop. Freestanding, with 25 drawers.

Specification: Width: Depth: Height:Overall Size: 540mm 170mm 360mmDrawer (x25): 100mm 165mm 53mm

FModel No. APDC25

F


Professional quality steel construction for use inworkshop. Freestanding, with 16 drawers.

Specification: Width: Depth: Height:Overall Size: 435mm 170mm 290mmDrawer (x16): 100mm 165mm 53mm

EModel No. APDC16

E

G


Professional quality steel construction for use inworkshop. Freestanding, with 36 drawers.Specification: Width: Depth: Height:Overall Size: 645mm 170mm 430mmDrawer (x36): 100mm 165mm 53mm

GModel No. APDC36

Assortment Box 37 CompartmentDouble Sided

Tough impact resistant polypropylene double sidedassortment box with 37 fixed compartments. Fibrereinforced long life plastic locking catch and carryhandle which allows unit to unfold flat for easy accessto both compartments at the same time. Clear plasticlids for easy identification of contents.

Specification: Width: Depth:Height:Overall Size: 370mm 295mm 115mmCompartment Size:Extra Small (x2): 56mm 36mm 51mmSmall (x24): 56mm 51mm 51mmMedium (x1): 114mm 34mm 51mmMedium/Large (x8): 114mm 52mm 51mmLarge (x1): 114mm 114mm 51mmX-Large (x1): 350mm 115mm 51mm

HModel No. APAS37

H

Section 8 Parts Storage412

Truck & Site Boxes

Manufactured from heavy gauge steel with seam weldedjoints. Folded lips add strength and rigidity. Enamel finishhelps prevent corrosion. Box may be secured with apadlock hidden in recess at the front. Features heavy-duty handle on each end of box for manoeuvrability. Lidis secured with locked arm when open. STB02 andSSB01 are also fitted with welded feet allowing unit tobe moved by forklift. Feet have pre-drilled holes for theoption of securing in one place. Suitable for securestorage of tools and heavy equipment, on site, in vehicle,in the workshop or at home.

Model No. SEE RIGHT

D

F

E

Steel Storage Chests

Manufactured from heavy gauge steel. Supplied flatpacked saving high freight cost. Quick and easy toassemble with all nuts and bolts hidden from view onceunit is built up. Enamel finish helps prevent corrosion.Features a cylindrical lock for added security. Suitablefor site, workshop and home use.

Model No. SEE RIGHT

A

A

B

C

Model No: SB565 SB765 SB1200Width: 565mm 765mm 1200mmDepth: 350mm 350mm 450mmHeight: 320mm 320mm 360mmWeight: 11kg 12kg 20kg

B C

D

Model No: STB01 STB02 SSB01Width: 812mm 1050mm 1220mmDepth: 483mm 508mm 610mmHeight: 355mm 595mm 700mmWeight: 34kg 52kg 69kg

E F

A C-

D F-

Section 8 Truck & Site Boxes 413

Section 8 Site Boxes414

Heavy-Duty Site Boxes

Heavy-duty site security boxes, peace of mind storagefor tools and equipment. This range provides some ofthe best security available on the market with keyfeatures as follows; Twin double throw deadlocks. Anti-jemmy bars all around to prevent tools/prybars

being forced into the gap between lid and box. Hydraulic arms, which assist in controlled

opening/closing of sturdy lid. Drop down side handles. Full width split piano hinge welded to lid and box. Access for forklifts on site security box range. Manufactured from 1.5 - 3mm thick steel. (See

individual model specification for details). Each box is supplied with 4 keys, which are from a

combination of 1:3000. Protective rubber mat supplied as standard with

each box. Optional wheel kit available - Model No: SSBWK.

Site Box1180 x 640 x 635mm

Dimensions External (W x D x H): 1180 x 640 x 635mmDimensions Internal (W x D x H): 1130 x 595 x 545mmSteel Thickness:Body: 2mmSide Panel: 2mmLid: 2mmWeight: 72kg

AModel No. New SSB02

A


Dimensions External (W x D x H): 1180 x 640 x 1280mmDimensions Internal (W x D x H): 1130 x 595 x 1225mmSteel Thickness:Body: 3mmSide Panel: 3mmLid: 3mmShelf: 2mmWeight: 165kg

CModel No. New SSB04

C



BModel No. New SSB03

B



DModel No. New SSB05

D

Wheel Kit 4pcØ125 x 50mm

Optional kit includes 2 fixed wheels and 2 castors withbrake. Suitable for mounting the truck, site and flammablessecurity boxes - Model No's: SSB02, SSB03, SSB04,SSB05, FSB01, FSB02, STB03, STB04 & STB05

EModel No. New SSBWK

E

Double throwdeadlocks

Drop down sidehandles

Hydraulic Arms Optional Wheel Kits

®

Section 8 Truck & Site Boxes 415

A

B

Heavy-Duty Truck & FlammablesSite Boxes

Heavy-duty truck and site security boxes, peace ofmind storage for tools and equipment. This rangeprovides some of the best security available on themarket with key features as follows; Twin double throw deadlocks. Anti-jemmy bars all around to prevent tools/prybars

being forced into the gap between lid and box. Hydraulic arms, which assist in controlled

opening/closing of sturdy lid. Drop down side handles. Full width split piano hinge welded to lid and box. Access for forklifts on flammables site and truck

range. Flammables storage models also feature

additional fume venting and removable drip tray . Manufactured from 1.5 - 3mm thick steel. (See

individual model specification for details). Each box is supplied with 4 keys, which are from a

combination of 1:3000. Protective rubber mat supplied as standard with

each box. Optional wheel kit available Model No: SSBWK .

C

D

E

Flammables Site Box1180 x 640 x 635mm


DModel No. New FSB01

Truck Box1850 x 640 x 635mm

Dimensions External (W x D x H): 1850 x 640 x 635mmDimensions Internal (W x D x H): 1810 x 595 x 550mmBody Thickness:Side Panel: 2mmLid: 2mmShelf: 3mmWeight: 114kg

CModel No. New STB05


Dimensions External (W x D x H): 1305 x 490 x 455mmDimensions Internal (W x D x H): 1255 x 445 x 445mmBody Thickness:Side Panel: 1.5mmLid: 2mmShelf: 2mmWeight: 51kg

BModel No. New STB04


Dimensions External (W x D x H): 960 x 490 x 455mmDimensions Internal (W x D x H): 915 x 445 x 445mmBody Thickness:Side Panel: 1.5mmLid: 1.5mmShelf: 1.5mmWeight: 37kg

AModel No. New STB03

Flammables Site Box1180 x 640 x 1280mm


EModel No. New FSB02

D E

Hydraulic arms fittedto all models.

Double throw deadlockson all models.

®

Section 8 Key Security416

Security Key Cabinets

Seamless steel construction with durable coating forcorrosion resistance. Fitted with high quality cylinder typelock and supplied with two keys. Piano hinged door withcatch plate gives added security. Supplied with a packof colour coded key tags. Includes mounting screws andwall plugs. Suitable for a wide variety of applications.Model No: Key Capacity: Size (W x D x H):

SKC20 20 160 x 80 x 200mmSKC45 45 240 x 80 x 300mmSKC93 93 240 x 80 x 300mm


123

Heavy-Duty Security KeyCabinets

Steel construction with durable coating for corrosionresistance. Fitted with high quality cylinder type lock andsupplied with two keys. Numbered, colour coded hookbars are adjustable to suit varying key sizes. Suppliedwith index card for easy key location. Includes mountingscrews and wall plugs. Extra depth on SKC100D allowsstorage of key bunches and unusually shaped keys.Model No: Key Capacity: Size (W x D x H):

SKC50 50 375 x 80 x 550mmSKC100 100 375 x 80 x 550mmSKC100D 100 375 x 140 x 550mm


123

A

12 3

D

C

Key Tag Assortments

Assorted colour coded key tags. Ideal for use in keycabinets for easy referencing.Model No: Pack Qty:SKTAG25 25SKTAG50 50


2

1

See page 701 for a full range of Wheel & Steering Locks.

Cylinder typelock with twokeys on thesethree models.

Cylinder type lock with tumbler security onthese three models.

Security Key CabinetsTumbler Lock

Seamless steel construction with durable coating forcorrosion resistance. High quality cylinder type lockwith tumbler security system. Piano hinged door withcatch plate gives added security. Supplied with numbertags. Includes mounting screws and wall plugs. Colourcoded key tags not included.Model No: Key Capacity: Size (W x D x H):

SKC820 20 160 x 80 x 200mmSKC836 36 240 x 80 x 300mmSKC857 57 280 x 80 x 370mm


B

1

23

123

3

Section 8 Cash Boxes, Safes & Lock Alarm Security 417

Electronic CombinationSecurity Safes

Heavy-duty construction with twin locking bolts. Simpleto operate electronic keypad accepts a combination ofbetween three and eight numbers, giving millions ofcombinations. Three LEDs show security, power andoperating status. Includes battery back-up and manualoverride. SCS03 is supplied with two shelves and foursupport feet. Powder coated finish. Compact design,pre-drilled holes and security fixings allow safe to behidden discreetly away.

Model No: SCS00Sizes (W x D x H):External: 310 x 200 x 200mmInternal 305 x 140 x 195mmWall/Door Thickness: 2/4mm

Model No: SCS01Sizes (W x D x H):External: 350 x 250 x 250mmInternal: 340 x 200 x 240mmWall/Door Thickness: 2/4mm



B E-Model No. SEE BELOW

B

D

C

C

D

E

B

Electronic keyboard accepts a combination ofbetween three and eight numbers giving millionsof combinations.

E

Security Cash Boxes

Sturdy steel construction with rounded corners andreinforced locking catch plate. Fitted with high qualitycylinder type lock and supplied with two keys. Handlerecesses into lid allowing boxes to be stacked.Features three compartment removable coin tray insmaller model and five compartments in SCB04.

Model No: Compartments: Size (W x D x H):SCB03 3 250 x 180 x 80mmSCB04 5 300 x 230 x 90mm


A

1 2

12

Lock Alarm System2.4mtr Cable

Portable security lock which sounds an 120 decibelsiren if lock is tampered with or if cable is cut. Features2.4mtr plastic coated hardened steel cable forresistance to corrosion and cutting. Additional securitybracket allows lock alarm to be permanently fitted towalls, posts, vehicles or machinery . Highly durablecasing with steel inner chassis. Ideal for securing largeor multiple items against theft. Supplied with two keys.

Noise Level: 120dbCable Length: 2.4mtrBattery: 1 x 9V Cell (not included)

GModel No. New LA24

Lock Alarm System1.5mtr Cable

Portable security lock which sounds an 1 10 decibelsiren if lock is tampered with or if cable is cut. Features1.5mtr plastic coated hardened steel cable forresistance to corrosion and cutting. Highly durablecasing with cylinder lock. Ideal for securing bicycles,motorcycles and large machinery/equipment againsttheft. Supplied with two high security keys.

Noise Level: 110dbCable Length: 1.5mtrBatteries: 2 x AAA Cells (not included)

FModel No. New LA15

GF

See page 177 for full specification of our MotorcycleWheel Chock.

See page 701 for full range of Parking Barriers.

Section 8 Racking Systems418

D E

Racking Unit with 5 Shelves70kg Capacity Per Level

Galvanized five-shelf universal rack system. Totalcapacity 350kg with a maximum 70kg per level. Quickand easy three-stage assembly , no nuts or boltsrequired. Breaks down into two separate modularsystems.Width: 1000mmDepth: 400mmHeight: 1870mm

AModel No. AP2935

Racking Systems

A range of no-fuss galvanised racking systems.Ingenious design means you need no tools to assemble.No awkward nuts and bolts. Shelves simply click intothe legs saving time, money and frustration. TheAP2935 and AP21050 can be set up as full 5 shelfracks or as smaller workstations with shelves. AP2939and AP2950 have the option to add on extension baysby ordering extension kits. Optional reinforcementbars are available for AP2950. These bars increasecapacity of AP2950 from 120kg to 200kg per level.

A A

A


High quality galvanized steel. 100kg Capacity per levelgiving a total 500kg capacity per rack. No nuts andbolts means no tools required to assemble. The fiveshelves can be positioned at various heights and cantake hanging files without any modifications. Units canbe added to by ordering the extension bay kitAP2939/E (see below).Width: 900mmDepth: 390mmHeight: 2000mm

BModel No. AP2939

B

Shelf Rack Extension Packfor AP2939

Pack includes one upright end frame and five shelves.Connects to AP2939 to make one extra bay . No limitto number of bays that can be added.Width: 900mmDepth: 390mmHeight: 2000mm

CModel No. AP2939/E

C

Kick-Step - Steel

Steel construction with heavy non-slip rubber treads.Three spring-loaded wheels allow step to glide over floor,yet sit down firmly on rubber stops when load is applied.Step Heights: 220, 430mmBase Size: Ø440mmCapacity: 150kg

DModel No. KS1

Kick-Step - Composite

Robust composite construction with non-slip surface.Three spring-loaded wheels allow step to glide over floor,yet sit down firmly on rubber stops when load is applied.Step Heights: 220, 420mmBase Size: Ø440mmCapacity: 150kg

EModel No. KS2

1 2 3

Model No. AP2935 features boltless fixing system - simple three stage assembly, erected in minutes.

Tools & accessoriesnot included.

Tools & accessoriesnot included.

Tools and accessories not included.

Tools & accessories not included.

70kg

70kg

70kg

100kg100kg

Section 8 Racking Systems 419


High quality galvanized steel. No nuts and bolts meansno tools required to assemble. Contains five 500mmdeep shelves capable of holding 120kg each. Optionalreinforcement bars available to increase to 200kg maxper level giving 1000kg capacity per rack, order ModelNo. AP2950/1 (see below). Shelves can be positionedat various heights and can take suspended fileswithout any modifications. Units can be added to byordering the extension bay kit Model No. AP2950/E(see below). Suspension filing fits racking withoutpurchase of any extras.

Width: 1000mmDepth: 500mmHeight: 2000mm

AModel No. AP2950

A

Reinforcement Bar Kitfor AP2950

Set of five reinforcement bars. Upgrades AP2950 to1000kg total capacity - 200kg maximum per level.

CModel No. AP2950/1

5 Level Racking Extension Packfor AP2950

Pack of two legs, five shelves, strengtheners andfixings. Connects to AP2950 to make one extra bay.No limit to number of bays that can be added. Capacityis 120kg per shelf or add optional reinforcement kitModel No. AP2950/1 for 200kg per level. Suspensionfiling fits racking without any extra accessory.


BModel No. AP2950/E

B


Fully galvanized steel frame with wooden shelves.Incredible 250kg capacity per level giving a maximumcapacity of 1250kg per rack. No nuts and bolts meansno tools required to assemble. Clips together in minutes.Fully flexible racking can be used as a single bay rack orsplit into two separate shelf systems or workstations.


DModel No. AP21050


Fully painted steel frame with five MDF shelves. 350kgCapacity per level giving a maximum capacity of1750kg per rack. No nuts and bolts means no toolsrequired to assemble. Clips together in minutes.Racking can be used as a single bay rack or split intotwo separate shelf systems or workstations.


EModel No. AP6350

D

D

D

C

A





120kg120kg

66%

250kg

E

350kg

B

IncreasesCapacity

Section 8 Racking Systems420


Fully painted steel frame with five MDF shelves.Z-Shape beams of fers added strength with 600kgcapacity per level, giving a maximum capacity of3000kg per rack. Boltless design means no toolsrequired to assemble. Clips together in minutes. Useas a single bay full height rack or split into two separatehalf height storage stations.



A

Heavy-Duty Racking Unit with 4 Mesh Shelves900kg Capacity Per Level

Fully painted steel frame with four heavy-duty wire mesh shelves. Industrial structured beams of fer addedstrength with 900kg capacity per level, giving a maximum capacity of 3600kg per rack. Boltless design means notools required to assemble. Clips together in minutes. Suitable storage solution for workshop, body shop,warehouse and agricultural environments.



B

600kg900kg

Heavy-Duty Racking Extension Pack with 4 Mesh Shelves900kg Capacity Per Level

Pack includes one upright end frame and four heavy-duty wire mesh shelves. Connects to AP6572 to make oneextra bay. No limit to the number of bays that can be added, to make a continuous run.


CModel No. New AP6572E

C

900kg

See page 418 for fulldetails of our kicksteps that make iteasier to gain accessto high up shelves.


A

HEAVY DUTY

HEAVY DUTY

Section 8 Shelving & Racking 421

A

Racking Unit with 3 Beam Sets1000kg Capacity Per Level

Racking unit complete with upright frames and crossbeams. 1000kg Capacity per level.

Comprising: 2 x APR1001, 3 x APRT2251


Cross Beams

The range of fers two cross sections of beam. APRBbeams are designed to take a chipboard shelf. APRTbeams are suitable for direct loading of small storagepallets. Sold in pairs.

DModel No. Not Illustrated SEE BELOW

B

Shelving & Racking Systems

Designed to meet the requirements of the mostdemanding professionals. This shelving/rackingsystem is especially suited for storage solutions in theworkshop, body shop, warehouse and agriculturalenvironments.

Made from high quality steel. Fast and simple to erect - no tools required to

attach cross members to uprights. Beam designs offer unsurpassed levels of rigidity

and stability. Available in two units that can be extended with

the purchase of additional upright frames.Then add the appropriate size and quantity of cross beams to fit your application.

To make up your own combination, simply select your shelf/rack depth, order the upright frames to suit, then add the appropriate size and quantity of cross beams to fit your application.

APRB beams are designed to accept a chipboardshelf. You source the chipboard from your local merchant to keep the cost low. We recommend either19 or 22mm thickness as a minimum.

FRAME PROFILE

Heavy steel frames haveunique profile that givesthem added strength andrigidity. This makes theracking particularly suitablefor commercial environmentswhere their design andconstruction ensure a safeand extended life span.

55mm

40mm

48mm

A mallet may be necessary to assemble the beams tothe uprights. See page 98 for full range.

Model No: Width: Capacity: CrossSection:

Cross Beam Specification

APRB1151 1150mm 900kg

APRT2251 2250mm 1000kg

Upright Frames

Metal frames consist of uprights joined by spacers anddiagonal struts. The uprights are supplied with metalbase plates that may be fastened to the floor. Uprightsare finished in heavy-duty coating to prevent corrosionand maintain appearance of shelving. The length of thespacers and struts determines the depth of the framesand these are available in two depths. Framessupplied individually.

Model No: Depth: Height:APR601 600mm 2000mmAPR1001 1000mm 2000mm

CModel No. Not Illustrated SEE BELOW

Shelving Unit with 3 Beam Sets900kg Capacity Per Level

Shelving unit complete with upright frames and crossbeams. 900kg Capacity per level. Chipboard shelvingnot included.

Comprising: 2 x APR601, 3 x APRB1151


Safety Pins

Optional safety device to prevent inadvertent removal ofbeam. Pins clip into upright and prevent beam riding upand out of location point. Supplied in a pack of 12 pins.

EModel No. New APR/SL12

Chipboard Panel Supports

Clips between front and rear beam and preventschipboard panel sagging excessively. Recommendedfor applications where shelves are loaded towards theirfull capacity for prolonged periods. Supplied individually.

Model No: Depth:APR/CPS601 600mmAPR/CPS1001 1000mm


*Chipboard shelves & display material not included. *Display material not included.

E

F

1000kg

900kg

APRT SECTION

APRB SECTION

Section 9Lighting & Power423 Torches & Lanterns428 Lead Lamps430 LED Lighting 432 Low Voltage Lighting Systems434 Retractable Lighting436 Floodlights439 Generators, Inverters & Transformers442 Extension Leads & Cable Reels

1 LED Work Light withMulti-Angle Magnet/Clip

Aluminium bodied light supplied on magnetic or springclip base. Double ball joint mounting gives infiniteadjustment for pin point beam alignment. Bright LEDpowered by 3 x LR44 cells (supplied). Push buttonon/off switch. Ideal when working in poorly illuminatedareas or for more general close lighting at night.Cell Qty x Type: 3 x LR44 (supplied)

B

B

Model No. HT992

A

3 LED Flexi-Light 175mm

Work light with fully adjustable 175mm magneticflexible shaft. Complete with on/of f switch andweatherproof body . Bright light produced by threeLEDs, powered by 3 x LR44 cells (supplied). Idealwhen working in poorly illuminated areas or for moregeneral close lighting at night.Cell Qty x Type: 3 x LR44 (supplied)

CModel No. LED003

C

3 LED Work Light Clip-On

Clip-on work light with weatherproof body. Light fullyadjustable on clip for accurate direction. Bright lightproduced by three LEDs, powered by 3 x LR44 cells(supplied). Ideal when working in poorly illuminatedareas or for more general close lighting at night.

Cell Qty x Type: 3 x LR44 (supplied)

AModel No. HT991

1 LED Ear Light

Hands-free, ultra bright LED light with 100,000hr life.Adjustable light angle and sliding on/off switch. Foambacking for comfortable fit when in use. Supplied with 2x CR2016 3V cells.

Cell Qty x Type: 2 x CR2016 (supplied)

IModel No. HT993

I

Krypton Headband Torch

High-density plastic case. Waterproofed design withrubber O-ring seals, as used by professional divers.High output 4.8V Krypton bulb powered by 4 x AA cells.Fitted with comfortable, double-width headband andfoam brow pad. Waterproof to a depth of 30mtr with45mm lens.Cell Qty x Type: 4 x AA (not included)Weight: 180g

HModel No. HT989

H

3 LED Headband Torch

Hands-free LED spotlight. Features two white LEDs forgeneral use and one red LED, which can be used atnight to help maintain night vision. Adjustableinclination to direct light source as required. Adjustableheadband and foam brow pad for added comfort. Slideon/off switch. Powered by 3 x AAA cells (supplied).

Cell Qty x Type: 3 x AAA (supplied)Weight: 60g

EModel No. HT03LED


Hands-free LED spotlight with tough compositeweather resistant body. Features high output LEDspowered by 3 x AAA cells (supplied). Push-buttonon/off switch with three light settings. Adjustableinclination to direct light source. Fitted with double-width headband and foam brow pad for added comfort.Cell Qty x Type: 3 x AAA (supplied)Weight: 120g

GModel No. HT07LED

G


Hands-free LED spotlight with adjustable inclinationto direct light as required. Adjustable headband andfoam brow pad for added comfort. Twist action on/offswitch. Supplied with spring clip attachment foruse without headband. Powered by 2 x CR2016 3Vcells (supplied).

Cell Qty x Type: 2 x CR2016 (supplied)Weight: 21g

DModel No. HT01LED

D

3 LED & 1W Luxeon LEDHeadband Torch

Hands-free Luxeon LED spotlight. Features three whiteLEDs for general use and one 1Watt Luxeon LED, which canbe used when a brighter light is needed. Adjustable inclinationto direct light source as required. Adjustable headband andfoam brow pad for added comfort. Moulded push-buttonon/off switch. Powered by 3 x AAA cells (supplied).Cell Qty x Type: 3 x AAA (supplied)Weight: 80g

FModel No. New HT104LED

FE

Section 9 Work Lights 423

LuxeonLuxeon

Aluminium Torches

Stylish aluminium body with anodised finish andcontoured for firm grip. D Cell models feature sealed push-button switch. AA cell model has a twist-headon/off function. Water and impact resistant, fitted withKrypton bulb for maximum light output. Supplied withspare bulb.


A

D

1

2

1

2

Aluminium LED Torches

Ultra bright LEDs with up to 80,000 hours life.Manufactured from lightweight aluminium with knurledhandle for extra grip. Push-button on/of f switch.Supplied with batteries.Model No: LED Qty: Cell Qty & Type:

LED004 6 2 x AA (supplied)LED005 10 2 x D (supplied)


12

Model No: Cell Qty x Type:AK3302AA 2 x AA (not included)AK3302D 2 x D (not included)AK3303D 3 x D (not included)

123

G

Rubber Torches

Heavy-duty durable rubber torches. Fitted with highoutput Krypton bulb. Sealed push-button power controlswitch. Supplied with lanyard and batteries.Model No: Cell Qty & Type:

RT206 2 x AA (supplied)RT207 2 x D (supplied)


12

B

H

LED Wind-Up RechargeableTorch

Bright LED light available under all conditions withthirty minutes illumination from one minutes winding.Ideal for outdoor activities and as an emergency torchin the home or car. Two switchable levels of brightness.No batteries or bulbs to replace.

Duration: 1 LED - 30min, 3 LEDs - 20min

CModel No. AK3305

C

F

F

Aluminium CREE LED Torch 1W

Three times more powerful than a standard LED byusing revolutionary technology . The single 1W attCREE LED gives an extremely bright, white light withan output of 70 lumen. Illumination type can bechanged from spotlight to wide area with a simpletwisting action of the head. Features lightweightaluminium housing, rear on/off push-button and wriststrap. Powered by 3 x AAA cells (supplied).

Output: 70lmCell Qty x Type: 3 x AAA (supplied)

FModel No. New LED008

F

Style-Point LED Penlight

Powerful, precise and pocket-sized LED penlight.Intense white light with 100,000 hours of LED life.Fingertip control - press to flash light, screw down capfor continuous light. Unit is water resistant.Length: 165mmCell Qty & Type: 3 x AAAA (supplied)Replacement Cells: BATAAAA

HModel No. LED001

Aluminium Luxeon LED Torch1W

Weight-for-weight double the light output of otherleading brands of torch. The single 1Watt Luxeon LEDhas an output of 25 lumen. Features aluminiumhousing, making the torch lightweight, push-buttonon/off switch, lanyard and carry-case with belt loop.Powered by 3 x AAA cells (supplied).Output: 25lmCell Qty x Type: 3 x AAA (supplied)

EModel No. LED002

E

Aluminium Luxeon LED Torch3W

Weight-for-weight double the light output of otherleading brands of torch. The single 3Watt Luxeon LEDhas an output of 75 lumen. Features aluminiumhousing, making the torch lightweight, push-buttonon/off switch, lanyard and carry-case with belt loop.Powered by 2 x C cells (supplied).Output: 75lmCell Qty x Type: 2 x C (supplied)

GModel No. LED006

Section 9 Torches424

1

2

3

LuxeonLuxeon

LuxeonLuxeon

5 LED Mini Aluminium Torcheswith Magnetic Pick-Up

Aluminium bodied torch with telescopic Ø6mm, 0.5kg magnetic pick-up. 5 Ultra bright LEDs have up to 100,000hrlife. Knurled handle for extra grip. Pull torch head to release pick-up tool then extend. Push on/of f button onbase.

Model No: LED005P LED005PB LED005PRColour: Black Blue RedMinimum/Maximum Extended Length: 148/528mm 148/528mm 148/528mmLifting Capacity: 0.5kg 0.5kg 0.5kgLED Qty: 5 5 5Cell Qty x Type: 4 x LR44 (supplied) 4 x LR44 (supplied) 4 x LR44 (supplied)


1 2 3

5 LED Mini Aluminium Torchwith Magnetic Pick-UpDisplay Box of 12

Aluminium bodied torch with a telescopic, pick-up anda, Ø6mm, 0.5kg magnet. 5 Ultra bright LEDs have upto 100,000hr life. Knurled handle for extra grip. Pulltorch head to release pick-up tool then extend. Pushon/off button on base. Four of each colour supplied incounter top display box.

Minimum/Maximum Extended Length: 148/528mmLifting Capacity: 0.5kgLED Qty: 5Cell Qty x Type: 4 x LR44 (supplied)

B

Model No. New LED005PDB

B

C

1

2 3

A

6 LED Aluminium Torch withMagnetic Pick-Up Display Box of 12

Aluminium bodied torch with a telescopic, flexible pick-up and a strong, Ø10mm, 1.3kg magnet. 6 Ultrabright LEDs have up to 80,000hr life. Knurled handlefor extra grip. Pull torch head to release pick-up toolthen extend. Push on/off button on base. Four of eachcolour supplied in counter top display box.

Minimum/Maximum Extended Length: 175/685mmLifting Capacity: 1.3kgFlexible Length: 60mmLED Qty: 6Cell Qty x Type: 4 x LR44 (supplied)

DModel No. New LED007PDB

D

1 LED Aluminium Keyring Torch0.5W

High output 0.5Watt LED gives brighter illuminationthan equivalent standard LED torches. Small andcompact design, ideal for keeping close at hand onkeyring. Features aluminium housing with twist on/offcontrol and key chain. Powered by 1 x AAA cell(supplied).

Cell Qty x Type: 1 x AAA (supplied)

EModel No. New LED010

E

6 LED Aluminium Torcheswith Magnetic Pick-Up

Aluminium bodied torch with strong telescopic Ø10mm, 1.3kg flexible magnetic pick-up. 6 Ultra bright LEDshave up to 80,000hr life. Knurled handle for extra grip. Pull torch head to release pick-up tool then extend. Pushon/off button on base.

Model No: LED007P LED007PB LED007PRColour: Black Blue RedMinimum/Maximum Extended Length: 175/685mm 175/685mm 175/685mmLifting Capacity: 1.3kg 1.3kg 1.3kgFlexible Length: 60mm 60mm 60mmLED Qty: 6 6 6Cell Qty x Type: 4 x LR44 (supplied) 4 x LR44 (supplied) 4 x LR44 (supplied)

CModel No. New SEE BELOW

1 2 3

Extendsto 685mm

1

2 3Extends

to 528mm

Section 9 Torches 425

E F

Rechargeable Halogen Spotlight5-Million Candle Power

Weatherproof composite spotlight with carry handle.Integral stand keeps lens and battery case off the floorand permits light to be directed where it is needed.Ø170mm Lens with halogen bulb produces 5-millioncandle power of intense white light and is suitable for avariety of industrial, domestic and leisure applications.Supplied with two sealed heavy-duty batteries, in-vehicle charger and 230 - 12Volt battery charger pack.

Lens Ø: 170mmCell Type: 12V(2 x 6V) - 4Ah Rechargeable

HModel No. AK437

H


Composite bodied spotlight with carry handle. Integralstand keeps lens and battery case of f the floor andpermits light to be directed where it is needed.Ø200mm Lens with halogen bulb produces 10-millioncandle power of intense white light, suitable for avariety of industrial, domestic and leisure applications.Powered by 12V 7Ah sealed lead acid battery .Supplied with carry strap, in-car charging cable and230 - 12Volt battery charger pack.Lens Ø: 200mmCell Type: 12V - 7Ah Rechargeable

IModel No. AK438

I


Tough, aluminium bodied spotlight with integral LEDmap-reading light and heavy-duty rubber impact guards.Ø90mm Lens and halogen bulb produce 2-millioncandle power of intense white light, suitable for a varietyof industrial, domestic and leisure applications. Featuresslide dimmer switch, LED battery status display andlocking power switch. 6Volt 4Ah battery gives around 25minutes of continuous operation. Supplied with in-vehiclecharger and mains powered battery charger.Lens Ø: 90mmCell Type: 6V - 4Ah Rechargeable Lead AcidReplacement Battery: ML2BP

GModel No. ML2

G

Krypton Rechargeable Lantern

Weatherproof rechargeable lantern in composite casewith sealed switch. Ø100mm Extra large reflector withprotective bumper ring and powerful Krypton bulb thatgives 70% more light than conventional bulbs. Lanternfloats if dropped in water, making it suitable for marineapplications. Built-in rechargeable 6V olt 4Ah sealedlead acid battery. Supplied with 12Volt DC charging leadwith cigarette lighter adaptor and 230Volt mains charger.Lens Ø: 100mmCell Type: 6V - 4Ah Rechargeable

DModel No. AK433

D

1,000,000CANDLE POWER





Krypton Weatherproof Lanternwith PJ996 Cell

Strong, weatherproof lantern in composite case withsealed switch and powerful Krypton bulb. Unit floats ifdropped in water . Suitable for marine applications.Accepts 1 x PJ996 cell (supplied).Lens Ø: 92mmCell Type: 1 x PJ996 (supplied)Replacement Bulb: AK427/B

BModel No. New AK427BP

B

Krypton Weatherproof Lanternwith PJ996 Cell Display Box of 6

Display box of 6 x AK427BP Weatherproof Lanterns,each supplied with PJ996 cell.

Lens Ø: 92mmCell Type: 1 x PJ996 (supplied)Replacement Bulb: AK427/B

CModel No. New AK427BPDB

CA

Krypton Weatherproof Lantern

Strong, weatherproof lantern in composite case withsealed switch and powerful Krypton bulb. Unit floats ifdropped in water . Suitable for marine applications.Accepts 1 x PJ996 cell (not included).Lens Ø: 95mmCell Type: 1 x PJ996 (not included)Replacement Bulb: AK427/B

AModel No. AK427


Weatherproof composite spotlight with swivel handlefeature allowing pistol grip or carry handle operation.Integral foot doubles as carry handle when used inpistol grip mode. Ø1 10mm Lens with halogen bulbproduces 1-million candle power of intense white light,suitable for a variety of industrial, domestic and leisureapplications. Supplied with sealed 6Volt 4Ah battery, in-vehicle charger and 230 - 6Volt battery charger pack.Lens Ø: 110mmCell Type: 6V - 4Ah Rechargeable

EModel No. AK435


Weatherproof composite spotlight with swivel handlefeature allowing pistol grip or carry handle operation.Integral foot doubles as carry handle when used inpistol grip mode. Ø130mm Lens with halogen bulbproduces 3-million candle power of intense white light,suitable for a variety of industrial, domestic and leisureapplications. Supplied with sealed 6Volt 5Ah battery,in-vehicle charger and 230 - 6Volt battery charger pack.Lens Ø: 130mmCell Type: 6V - 5Ah Rechargeable

FModel No. AK436

Section 9 Lanterns & Rechargeable Spotlights426

Rechargeable FluorescentLantern 2 x 6W

Fluorescent lantern with twin neon tubes and flashingred alert lamp. Rechargeable sealed lead-acid batterygives over seven hours of light on a single charge.Rotary switch enables selection of lighting options.Recharge from the mains using the 230-6V olt poweradaptor included. Features integral storage of mainsadaptor in base of unit. Clear cap gives wide spread ofillumination and incorporates folding carry/hanginghandle. Optional in-car charger - Model No. AK435/CC.

Tubes: 2 x 6WPower Supply: 6V - 4AhHeight: 420mmOperating Time: 1 Tube: 7hr

2 Tubes: 3hrReplacement Tube: ML111/B

CModel No. ML111

C

Weatherproof FluorescentLantern 7W

Weatherproof design with single 7Watt U-type neontube. Powered by 6 x C cells (not supplied) located inthe base of the unit. Single rotary switch power control.Clear cap gives wide spread of illumination andincorporates folding carry/hanging handle.

Tubes: 1 x 7WCell Qty x Type: 6 x C (not included)Height: 270mmOperating Time: 15hrReplacement Tube: ML109/B

BModel No. ML109

B

LED Wind-Up RechargeableLantern

Bright LED lantern with revolutionary self-poweredtechnology via hand crank. Three light settings with upto 60 minutes illumination from only 1 minute wind-up. Take the lantern anywhere with no need toreplace batteries or bulbs. Supplied with integralcompass and hanging handle.

Light Settings: 1, 3, 9 LEDApproximate Operating Time: 1 LED - 60min 3 LED - 35min, 9 LED - 25min

AModel No. AK3306

A

D


12V

Four-Way Spotlight1.5-Million Candle Power

Tough composite body with oversized reflector andquartz halogen bulb. Produces 1.5-million candlepower of light from 12V olt supply using a cigarettelighter plug on coiled 3mtr cable. Use four ways: hand-held spotlight, high level tripod light, low level tripodlight, or on ground spike.Height: 400mmPower Supply: 12V Plug-in AdaptorReplacement Bulb: ML100/B

DModel No. ML100

RoadStart® Emergency PowerPack 12V 850 Peak Amps

Composite case with battery cable storage and carryhandle. LED battery condition and charge indicators.Features over-charge protection preventing damageto the battery. Fitted with 12Volt power socket that willaccept any 12Volt device fitted with a cigarette lightertype plug. Supplied with mains charger and adaptor forin-car charging.

Cold Cranking Amps: 220APeak Amps: 850AVoltage: 12VAuxiliary Output: 12VCable & Clamp Length: 0.48mtrWeight: 4.1kg

FStock Code New S0827

F

12V

850Peak Amps

Rechargeable Torch with SwivelHead

Halogen bulb and 6V 2.3Ah rechargeable battery give50,000 candle power beam. May also be used asflashing emergency warning light. Fully adjustablehead, combined with belt clip and magnetic base,makes this torch ideal for hands-free use. Suppliedwith mains charger , in-vehicle charger , wrist strap,pouch and spare bulb.Lens Ø: 56mmCell Type: 6V - 2.3Ah Rechargeable

EModel No. AK432

E

WARNING TRIANGLEPlease see pages 210 to 224 for our range

of Recovery & Towing Equipment.

Section 9 Lanterns & Spotlights 427

Lead Lamps

Incandescent type lead lamps provide plenty ofdirectional light for general purpose applications. Allmodels feature heavy-duty construction with electricalsafety to meet Low Voltage Directive. ML601 modelsinclude an on/off power control. Suitable for garage,workshop and domestic applications. All 230V oltmodels are fitted with a BS approved plug.

Model No. SEE TABLEB C

Lead Lamp 60W with Gripper

Incandescent lead lamp. Handle incorporates on/of fswitch and spring loaded gripper . Casing includes ball-mounted hook and hinged mesh cover whichprotects bulb and reflector. Use with 60W bulb. Fittedwith 5mtr cable and a BS approved plug.

DModel No. ML60GP

D

Lead Lamp 100W with Gripper

Heavy-duty construction features unique grippingmechanism incorporated into handle. Two-stagegripper adjusts 8-44mm and 44-75mm. Bulb mountedin ceramic holder and protected by metal grille givingsafe, directional light. Supplied with 5mtr cable and BSapproved plug.

Input: 230VPower: 100WBulb Fitting: BayonetCable Length: 5mtrFitted Plug: Overall Length: 330mm

EModel No. ML100/GP

E

230V

12V

230Vor

A

230V 12V

110Vor

230Vor

A C-

230V60W

_Bayonet

5mtr___

370mm

Input:Power:Bulb Included:Bulb Fitting:Cable Length:Fitted Plug:Battery Clips:In-Car Adaptor:Bulb Model No:Overall Length:

ML601 models include aswitch for easy powercontrol and time saving.

Rough Duty 12V Light Bulb

Suitable for use with lead lamps and more resistantthan domestic bulbs to bumps and knocksexperienced in the workshop.

Cap Type: Edison ScrewRating: 60W

GModel No. BS60

G

ML60/1212V60W

_

ES Cap5mtr

_

_

BS60280mm

Model No:Input:Power:Bulb Included:Bulb Fitting:Cable Length:Fitted Plug:Battery Clips:In-Car Adaptor:Bulb Model No:Overall Length:

ML60/110110V60W

_

ES Cap5mtr___

280mm

ML60230V60W

_

Bayonet5mtr___

280mm

ML60E230V60W

_

Bayonet5mtr___

220mm

ML601230V60W

_

ES Cap5mtr___

400mm

BA B B CML601/12V

12V60W

_

ES Cap5mtr

_

_

BS60400mm

C

Clamp Light 150W

Tungsten/halogen tube mounted in a die-cast head.Metal grille protects lens from damage. The swivelhead lamp can be hung using the large hanging hookor clipped to any available surface using the strongspring-clip. Supplied with 1.8mtr cable fitted with13Amp plug.

Power: 150WInput: 230VReplacement Tube: ML150C/B

FModel No. CL150

F

230V

230V

Section 9 Workshop Lead Lamps428

Section 9 Fluorescent Lead Lamps 429

Fluorescent Lead Lamps

High output lighting with even light spread and lowpower consumption. An 8W att fluorescent tubeproduces as much light as a 60Watt incandescent bulb.Mains voltage units are manufactured to Low V oltageDirective 73/23/EEC and feature double insulatedelectrical circuits and BS approved non-rewirable plugs.ML8 12Volt model features a two-way power supply ,battery clips and in-car accessory adaptor . All modelsfeature swivel hooks for easy positioning. EnergySaving models ML1 1, ML1 1/12, ML13/12 andML13230V feature high output tubes which giveenhanced light output while retaining their compact sizeand low power consumption. Models ML13/12 andML13230V also include integral power switch.

Model No. SEE TABLE

A

B

Lamp Clip with Universal Joint

Zinc plated clip with heavy-duty spring. Suitable for usewith ML1 1 and ML13/12. Jaws fitted with rubberprotection sleeves. Clamp mounted on universal jointaccepts a variety of torches and lead lamps.

FModel No. ML/CLIP

Lamp Clip

Strong clip with heavy-duty spring mechanism. Ballmounted shaft with C-clip accepts a variety of torchesand lead lamps.

GModel No. ML/CC

F

G

230V

12V

230Vor

230V 12V

230Vor

12VHEAVY DUTY

C D EA E-

Model No:Input:Power:Lamp Type:Tube Included:Cable Length:Fitted Plug:Replacement Tube:Overall Length:

ML13230V230V13W

Neon Tube

5mtr

ML13230VB370mm

5 LED Magnetic Push Light

Ideal work light for applications requiring hands-freeoperation. Magnet will adhere to any ferrous surfaceand alternative super stick backing attaches to non-ferrous surfaces. Super bright light produced byfive LEDs. Stainless Steel body with push-buttonon/off switch for easy operation when in tight areasi.e. engine bays. Powered by 3 x AAA cells(supplied).

LEDs: 5Cell Qty x Type: 3 x AAA (supplied)

IModel No. LED009

IH

LED Wind-Up RechargeableWork Light

Bright LED directional work light with optional chargingmethods. Either revolutionary self-powered technologyvia hand crank or cigarette lighter adaptor . Three lightsettings with up to 45 minutes illumination from only 1minute wind up, with no replacing of batteries or bulbs.Light Settings: 6, 12, 20 LEDApproximate Operating Time: 6 LED - 45min 12 LED - 35min, 20 LED - 25min

HModel No. AK3307

B B C D D E

Model No: ML8/97Input: 230VPower: 8WLamp Type: Neon TubeTube Included: Cable Length: 5mtrFitted Plug: Battery Clips: _In-Car Adaptor: _Replacement Tube: ML8/1Overall Length: 510mm

ML13/1212V13W

Neon Tube

5mtr__

ML13/12/B400mm

ML8/1212V8W

Neon Tube

5mtr_

ML8/1490mm

ML11230V11W

Neon Tube

5mtr__

ML11/12/B450mm

ML803230V

8WNeon Tube

5mtr__

ML8/1495mm

ML11/1212V11W

Neon Tube

5mtr__

ML11/12/B450mm

A

Model No: ML3012CInput: 12VPower: 1.5WLamp Type: 30 LEDCable Length: 5mtrFitted Plug: _Battery Clips: Overall Length: 330mm

ML60230V230V1.5W

60 LED5mtr_

425mm

ML30230V230V1.5W

30 LED5mtr_

330mm

ML36230V230V1.5W

36 LED5mtr_

235mm

ML3612C12V

1.5W36 LED

5mtr_

235mm

ML6012C12V

1.7W60 LED

5mtr_

400mm

B

C

12V

230Vor

12V

230Vor

12V

230Vor

A A B B C C

A

D E

F

60 LED Lead Lamp &Transformer Kit

60 LED Inspection lamp gives high output with lowpower consumption and is ideal for thegarage/workshop. High shock resistance andextremely long life. Fitted with 5mtr cable and on/of fswitch. Plug-in type transformer converts 230Volts to12Volts for safe use in the workshop.Transformer: 230V/12V 25W

FModel No. ML6012PXT

LED Lead Lamps

LED lamps give high output with low powerconsumption and are ideal for the garage/workshopsince they have low heat output, high shock resistanceand extremely long life, irrespective of switchingfrequency. All models are weatherproof, 12V modelsare fitted with battery clips and 230V models are fittedwith BS approved plug. All are fitted with 5mtr cableand a convenient grip-mounted on/of f switch.ML3612C and ML36230V have ball-jointed gripper togive maximum positioning versatility.

Model No. SEE RIGHT

A C-

Under Bonnet LED Lamps

Easily adjusted telescopic bracket mounts under open bonnet. Up to 96 LEDs give complete engine bayillumination. Lamp unit can be unclipped from mounting bracket and used separately . Supplied with hanginghook and 2.6mtr cable (12V and 230V versions).Model No: LED9512V LED95230V LED95RCInput: 12V 230V 4.8V 2.4Ah NiMHPower: 6W 12W 4WLamp Type: 96 LED 96 LED 95 LEDMinimum/Maximum Bonnet Width: 1200/2870mm 1200/2870mm 1200/2870mmApproximate Operating Time: - - 4hrApproximate Charging Time: - - 5hr


12V 230V Rechargeableor or

Under Bonnet Neon Lead Lamps

Spring loaded telescopic bracket mounts under open bonnet. Fluorescent tube with reflector gives completeengine bay illumination. Lamp unit can be unclipped from mounting bracket and used separately. Supplied withcable and ASTA/BS approved 3-pin plug.Model No: ML30 ML3610Input: 230V 230VPower: 30W 36WLamp Type: Neon Tube Neon TubeCable Length: 4mtr 5mtrOverall Length: 1300mm 1450mmMinimum/Maximum Bonnet Size: 1040/1800mm 1250/2000mmReplacement Tube: ML30.B ML3610.B

Model No. SEE BELOW

G

H

230V

230V

G H

Section 9 LED Lighting430

36 LED Lead Lamp &Transformer Kit

36 LED Inspection lamp gives high output with lowpower consumption and is ideal for thegarage/workshop. High shock resistance and extremelylong life. Fitted with 5mtr cable, on/of f switch and ball-jointed gripper . Plug-in type transformer converts230Volts to 12Volts for safe use in the workshop.Transformer: 230V/12V 25W

DModel No. ML3612PXT

G H-

Cordless 28 LED RechargeableInspection Lamp

Robust ABS housing featuring 28 super bright OsramLEDs, rubber grip for added comfort when holding thelight. Folding hanging hook for hands-free operationand on/off rocker switch. Ideal for use in engine bays,under body inspection and low-light work areas. 2 LEDcharging indicators. Supplied with mains dockingcharger and 12V in-car charger.Operating Time: 8hrCharge Time: 5hr

DModel No. LED2807

D


Robust housing, with rubber grip, incorporating 36super bright LEDs. Ball joint gripper for easypositioning. Ideal for use in engine bays, under bodyinspections and low-light work areas. Supplied withmains charger and LED charging indicator.Charging Time: 5hrOperating Time: 9hrLength: 220mm

BModel No. LED36

B


Robust ABS housing featuring 30 super bright LEDs.360° Swivel hanging hook and heavy-duty magnet forhands-free use. Rocker switch for two light settings.Ideal for use in engine bays, under body inspectionsand low light work areas.Operating Time: 10 LEDs 9hr, 30 LEDs 3.5hrCharging Time: 3.5hr

HModel No. LED3007

H

F

A


Robust housing with bumper ring incorporating 28super bright LEDs. Spring loaded gripper and hangingloop for easy positioning. Rocker switch offers high orlow output. Ideal for use in engine bays, under bodyinspection and low-light work areas. Operates for upto seven hours. Incorporates LED charging indicator .Supplied with mains charger.Battery: NiMH 3.6V 1.8AhOperating Time: Low: 7hr

High: 3.5hrLength: 300mmOptional In Car Charger LED28ICC

AModel No. LED28


Robust ABS housing featuring 24 super bright LEDs,360° swivel hanging hook and on/of f push buttonswitch. Ideal for use in engine bays, under bodyinspection and low-light work areas. Incorporates pin-jack with LED indicator for charging. Lasts up to 4hours when fully charged. Supplied with mains chargerand 12V in-car charger.Battery: 3.6V - 1.8AhOperating Time: 4hrLength: 260mm

CModel No. LED24

C


Robust housing, with rubber grip and end cap,incorporating 30 super bright LEDs. Rotating hanginghook for easy positioning. Ideal for use in engine bays,under body inspections and low-light work areas.Operates for 8 to 10 hours when fully charged. Fittedwith charging status LEDs and supplied with mainscharger.Battery: NiMH 4.8V 2.4AhOperating Time: 8-10hrLength: 300mm

IModel No. LED30

IG


Robust lightweight inspection lamp for the professionaluser. Shock, oil and water resistant (IP65) rubberhousing with contoured grip and 360° fold-away swivelhook. Recessed shatterproof polycarbonate wide lensand a highly polished reflector board gives anincreased spread of light. Thirty high intensity LEDsmake this lamp ideal for use around engine bays andfor under body inspections. A unique feature to thislamp are an additional three green LEDs and one redwhich indicate battery state, form a charging sequenceand warns the user when to charge. Lithium-ionpolymer battery (3.7V/3600mAh Li) for longer life, nomemory effect, a much slower discharge than typicalNi-MH batteries and can operate for up to eight hourson a single charge. Intelligent docking station stylecharger for constant current and battery protection.Supplied with 12V in-car charger.Battery: 3.7V/3.6Ah LiOperating Time: 8hrCharging Time: 5hr

EModel No. New LED3008

E

Cordless 30+6 LED RechargeableInspection Lamp

Robust housing of fering superb durability to helpprevent damage to unit. Featuring 36 super bright LEDs.30 LEDs used as an inspection lamp or 6 LEDs in theend for use as a directional torch. Single LED batteryindicator. Smooth rocker switch for turning unit on/of f.360° Swivel hanging hook for hands-free applications.Supplied with mains and 12V in-car chargers.

Battery: 3.6VLamp Type: 30 + 6 LEDLength: 270mm

FModel No. LED3006

Cordless 18 LED RechargeableMini Work Light

Robust housing, with rubber handle and end capfeaturing 18 super bright Osram LEDs. Small designis ideal for use in engine bays, under body inspectionand low-light work areas, particularly where access isrestricted. 2 LED charging indicators. Supplied withmains charger and storage pouch.Battery: 3.6V 600mAhCharging Time: 2.5hrOperating Time: 2.5hrLength: 250mm

GModel No. LED1807

Section 9 LED Lighting 431

Lead Lamp with Battery Clips24W/12V

Heavy-duty, low voltage, lead lamp with lens bumper.Spring-loaded gripper and hanging loop. Fitted withintegral on/off switch. Uses automotive type bayonetbulb. Supplied with 5mtr cable and battery clips fordirect connection to a 12Volt vehicle battery. Suitablefor garage, workshop and domestic applications.

Bulb Fitting: 24W/12V AutomotiveCable Length: 5mtrReplacement Bulb: TR24012/6Overall Length: 275mm

FModel No. ML2412C

F

Lead Lamp 24W/12V

Heavy-duty, low voltage, lead lamp with lens bumper .Spring-loaded gripper and hanging loop. Fitted withintegral on/off switch. Uses automotive type bayonetbulb. Supplied without plug or battery clips to enable userto select connectors suitable for the power supply .Suitable for garage, workshop and domestic applications.

Bulb Fitting: 24W/12V AutomotiveCable Length: 5mtrReplacement Bulb: TR24012/6Overall Length: 275mm

EModel No. ML24WP

E

Low Voltage Lead Lamp SystemPlug-In

Wall mounting, single outlet sealed transformer withintegral overload device converts 230Volt to 12Volt forsafe use in the workshop. Heavy-duty lead lamp isfitted with 7.25mtr cable to allow access all the wayaround a four post lift. Integral on/of f power switch.Outlet: Plug-in SingleOutput Rating: 1 x 25WBulb Fitting: 24W/12V AutomotiveCable Length: 7.25mtrReplacement Bulb: TR24012/6

Model No. ML25/PXT

D

C

CLead Lamp 24W/12V

Heavy-duty lead lamp with rubber grip and lens bumper.Fitted with integral power switch. Uses automotive typebayonet bulb. Lamp supplied without plug to enableuser to select plug or clips suitable for power supply .

Bulb Fitting: 24W/12V AutomotiveCable Length: 7.25mtrReplacement Bulb: TR24012/6Overall Length: 270mm

AModel No. ML25/WP

A

Lead Lamp with Battery Clips24W/12V

Heavy-duty lead lamp with rubber grip and lens bumper.Fitted with integral power switch. Uses automotive typebayonet bulb. Lamp supplied with battery clips for directconnection to a 12Volt vehicle battery.


BModel No. ML25/12C

B

Low Voltage Accessories

Low Voltage Plug and SocketModel No: TR24012/3

Battery Clip AdaptorModel No: TR24012/5

Model No. SEE BELOW

G H

IG J-

Convert all lamps on thispage to:

See opposite pagefor full details.

Low Voltage Lead Lamp SystemWall Mounting

Wall mounting, twin outlet sealed transformer withintegral overload device converts 230Volt to 12Volt forsafe use in the workshop. Heavy-duty lead lamp isfitted with 7.25mtr cable to allow access all the wayaround a four post lift. Integral on/of f power switch.Battery clip adaptor converts two-pin plug to batteryclips so lead lamp may be connected directly onto a12Volt battery . Transformer fitted with 13Amp plug.Supplied with Battery Clip Adaptor and 1 x Lead Lamp.Outlet: TwinOutput Rating: 2 x 25WBulb Fitting: 24W/12V AutomotiveCable Length: 7.25mtrReplacement Bulb: TR24012/6

DModel No. ML25K

J

Battery Clips (Pair)Model No: TR24012/4

Bulb 24W/12VModel No: TR24012/6

Section 9 Low Voltage Lighting Systems432

I

J

G

H

Heavy-Duty Lead Lamp withBattery Clips 24W/12V

Heavy-duty lead lamp with rubber grip and lensbumper. Uses automotive type bayonet bulb. Lampsupplied with 7.5mtr cable and clips to enableconnection to automotive battery.


Heavy-Duty Lead Lamp24W/12V

Heavy-duty lead lamp with rubber grip and lensbumper. Uses automotive type bayonet bulb. Lampsupplied with 7.5mtr cable but without plug to enableuser to select plug or clips suitable for power supply .

Bulb Fitting: 24W/12V Automotive Cable Length: 7.5mtrReplacement Bulb: TR24012/6Overall Length: 260mm

AModel No. ML2502/WP

A

BModel No. ML2502/12C

B

Low Voltage Lead Lamp System Wall Mounting

Wall mounting, twin outlet sealed transformer with integral overload device converts 230Volt to 12Volt for safeuse in the workshop. Heavy-duty lead lamp is fitted with 7.5mtr cable to allow access all the way around a fourpost lift. Lamp fitted with integral on/off power switch. Battery clip adaptor converts two-pin plug to battery clipsso lead lamp may be connected directly onto a 12V olt battery. Transformer fitted with 13Amp plug. Suppliedwith Battery Clip Adaptor and 1 x Lead Lamp.Outlet: TwinOutput Rating: 2 x 25WBulb Fitting: 24W/12V AutomotiveCable Length: 7.5mtrReplacement Bulb: TR24012/6

DModel No. ML2502K

D

Low Voltage Lead Lamp SystemPlug-In

Wall mounting, single outlet sealed transformer withintegral overload device converts 230Volt to 12Volt forsafe use in the workshop. Heavy-duty lead lamp isfitted with 7.5mtr cable to allow access all the wayaround a four post lift. Integral on/of f power switch.Outlet: Plug-in SingleOutlet Rating: 1 x 25WBulb Fitting: 24W/12V AutomotiveCable Length: 7.5mtrReplacement Bulb: TR24012/6

CModel No. ML2502/PXT

C


Wall mounting, single outlet sealed transformer withintegral overload device converts 230Volt to 12Volt forsafe use in the workshop. Heavy-duty lead lamp fittedwith 7mtr cable to allow access all the way around afour post lift. Battery clip adaptor converts two-pin plugto battery clips so lead lamp may be connected directlyonto a 12Volt battery. Transformer fitted with 13Ampplug. Supplied with Battery Clip Adaptor and 1 x LeadLamp.Outlet: SingleOutput Rating: 1 x 50WBulb Fitting: ES Cap

IModel No. ML60K

I

F G

Low Voltage Accessories

Wall Mounting TransformerModel No: TR24012/1Transformer: 230V-12V: Wall MountingOutput Rating: 1 x 50W

Wall Mounting TransformerModel No: TR24012/2Transformer: 230V-12V: Wall MountingOutput Rating: 2 x 25W

Plug-In Type TransformerModel No: TR24012/7Transformer: 230V-12V: Plug-In TypeOutput Rating: 1 x 25W

Model No. SEE BELOW

H

F H-

Bulb not included

36 LED Bulb Units for ML2502 &ML25 Series Lamps

Bright, 36 LED unit with automotive bayonet fitting,replaces bulb in ML25 and ML2502 series lead lamps.12 and 24V Versions available, each suitable for AC orDC supply. Low, 250mA/125mA, current draw is a bigadvantage when operating from vehicle battery.Model No: Supply: Current:LED3612B 12V AC or DC 200-250mALED3624B 24V AC or DC 100-125mA


E

INSPECTION LAMPSPlease see page 431 for ourrange of LED RechargeableInspection Lamps

Section 9 Low Voltage Lighting Systems 433

F

G

H

Model No: CRM1201 CRM1202 CRM1203 CRM1204 CRM1205Input: 230V 230V 230V 230V 230VOutput: 12V 12V 12V 12V 12VPower: 24W 1.5W 1.7W 60W 13WCable Length: 15mtr 15mtr 15mtr 15mtr 15mtrLamp Fitted: ML2502 ML3612C(LED) ML6012C(LED) ML601 ML1312C

Low Voltage RetractableLead Lamp Systems

The ideal solution for workshops dogged by theproblem of trailing wires. The system can be wall orceiling mounted and has a strong ratchet mechanismto ensure long service. The cable is retracted by asimple pull and release action. The cable reel has athermostatic trip switch to prevent overload. Both thelead lamp and cable reel are fitted with a power switchfor extra convenience. All models fitted with step downtransformer, from 230V input, to 12V output.

Model No. SEE BELOW

D

AA E-

15mtr

E

15mtr15mtr


Wall mounting, twin outlet sealed transformer withintegral overload device converts 230Volt to 12Volt forsafe use in the workshop. Heavy-duty lead lamp isfitted with 7.25mtr cable to allow access all the wayaround a four post lift. Integral power switch. Batteryclip adaptor converts two-pin plug to battery clips solead lamp may be connected directly onto a 12V oltbattery. Transformer fitted with 13Amp plug. Suppliedwith Battery Clip Adaptor and 1 x Lead Lamp.

Outlet: TwinOutput Rating: 2 x 25WBulb Fitting: 24W/12V AutomotiveCable Length: 7.25mtrReplacement Bulb: TR24012/6

Model No. ML25KF

F

C

B

15mtr 15mtr

A B C D E

Section 9 Retractable Lighting434

Section 9 Retractable Lighting 435

A B

C E

Retractable Lead LampSystems

The ideal solution for workshops dogged by the problemof trailing wires. The system can be wall or ceilingmounted and has a strong ratchet mechanism to ensurelong service. The cable is retracted by a simple pull andrelease action. The cable reel is fitted with manualthermostatic trip switch to prevent overload. The leadlamps are fitted with on/off switch for extra convenience.

Model No. SEE BELOW

A E-

Model No: CRM2301 CRM2302 CRM2303 CRM2304 CRM2305Input: 230V 230V 230V 230V 230VOutput: 230V 230V 230V 230V 230VPower: 24W 1.5W 1.5W 60W 13WCable Length: 15mtr 15mtr 15mtr 15mtr 15mtrLamp Fitted: ML2502 ML36230V(LED) ML60230V(LED) ML601 ML13230V

E

Low Voltage Lead Lamp SystemWall Mounted

Wall mounting, twin outlet sealed transformer withintegral overload device converts 230Volt to 12Volt forsafe use in the workshop. Heavy-duty lead lamp isfitted with 7.5mtr cable to allow access all the wayaround a four post lift. Integral power switch. Batteryclip adaptor converts two-pin plug to battery clips solead lamp may be connected directly onto a 12V oltbattery. Transformer fitted with 13Amp plug. Suppliedwith Battery Clip Adaptor and 1 x Lead Lamp.

Outlet: TwinOutput Rating: 2 x 25WBulb Fitting: 24W/12V AutomotiveCable Length: 7.5mtrReplacement Bulb: TR24012/6

FModel No. ML2502K

F

15mtr

15mtr 15mtr15mtr

15mtr

D

DCBA

D 230V

12V

110V 230V

E G-

Portable Floodlights

Tungsten/halogen tubes mounted in die-cast alloyheads with aluminium stands and foam rubber carryhandles. Metal grilles protect lamps from damage andprevent hands coming into contact with hot lens. Allmodels are weatherproof with 230V olt lights beingsupplied with 1.8mtr lead fitted with 13Amp BSapproved moulded plug. 12Volt model supplied withdual connection feature allowing use with eithercigarette lighter plug or battery clips. Plug not suppliedon 110Volt model.Model No: Power/Input: Replacement Tube:

ML150C 150W/230V ML150C/BML300C 300W/230V ML300/01ML300/12 100W/12V ML300/12-LML300/110 300W/110V ML300/110/01

Model No. SEE BELOW

Wall Mounting Floodlight500W

500Watt tungsten/halogen tube mounted in a die-castalloy head with wall bracket. Supplied without mainscable and suitable for indoor or outdoor mounting.Power: 500WInput: 230VReplacement Tube: ML500/01

AModel No. MD500C

A

Wall Mounting Passive InfraredFloodlight 500W

Infrared detector unit automatically switches 500Watttungsten/halogen lamp on when approached byvehicles or persons. Detects movement and heat andis fitted with adjustable sensitivity and light durationcontrols. Supplied with wall mounting bracket and fulloperating instructions. Supplied without mains cableand suitable for outdoor mounting.Power: 500WInput: 230VReplacement Tube: ML500/01

CModel No. MD520C

C

Extra-Heavy-Duty Floodlight/Work Light 500W

Tungsten/halogen tube mounted in adjustable die-castalloy head. Metal grille protects lamp from damage andprevents hands coming into contact with hot lens. Lightis weatherproof (IP44) and supplied with 3.0mtr cable,BS approved plug and spare tube in protective case.Power: 500WInput: 230VCable Length: 3mtrReplacement Tube Supplied: YesReplacement Tube: ML500/01

IModel No. MLF500

I

Wall Mounting Floodlight1000W

1000Watt tungsten/halogen tube mounted in a die-castalloy head with wall bracket. Supplied without mainscable and suitable for indoor or outdoor mounting.Power: 1000WInput: 230VReplacement Tube: MD1000C.1A

BModel No. MD1000C

B

230V

230V230V230V

D G-

Workshop Floodlight 33W

Three 11Watt fluorescent tubes in compact, impactresistant case suitable for workshop applications.Double insulated floodlight includes carry handle andstand.

Tubes: 3 x 11WInput: 230VReplacement Tube: ML33B

JModel No. ML33

J

H

230V

230V

Workshop Floodlight 48W

Two 24Watt fluorescent tubes in waterproof, impactresistant case suitable for workshop and occasionaloutdoor applications. Floodlight is mounted onadjustable base and is double insulated.

Tubes: 2 x 24WInput: 230VReplacement Tube: ML48B

HModel No. ML48

Heavy-Duty Workshop Floodlight72W with Power Take Off

Three 24Watt fluorescent tubes in impact resistantcase. Double insulated and IP54 rated making theselights suitable for workshop/body shop applications.Features two 230V olt, 13Amp, BS approved poweroutlet sockets. Includes carry handle and stand.

Tubes: 3 x 24WInput: 230VSockets: 2 x 230V 13AmpReplacement Tube: ML72F.B

KModel No. New ML72F

K

Heavy-Duty Workshop Floodlight144W with Power Take Off

Four 36W att fluorescent tubes in impact resistant case. Double insulated and IP54 rated making theselights suitable for workshop/body shop applications.Features three 230Volt, 13Amp, BS approved poweroutlet sockets. Includes carry handle and stand.

Tubes: 4 x 36WInput: 230VSockets: 3 x 230V 13AmpReplacement Tube: ML144F.B

LModel No. New ML144F

L

230V 230V

TwoSocketOutlet

ThreeSocketOutlet

Section 9 Floodlights436

F

DE

G

Section 9 Floodlights 437

Model No: ML36110T ML36230T ML58110T ML58230TPower: 2 x 18W 2 x 18W 1 x 58W 1 x 58WInput: 110V 230V 110V 230VMinimum/Maximum Height: 1785/2330mm 1785/2330mm 2225/2770mm 2225/2770mmReplacement Tube: ML36110F.FB ML36110F.FB ML58110T.FB ML58110T.FB

D

F

E F G

110V 230V 110V 230V

G

Fluorescent Tripod Lights

Fluorescent tubes mounted in impact resistant heads.The light units are supported on a telescopic stand withlocking screw. Tripod feet can be easily disassembled,allowing compact storage when not in use. 1 10VVersions are fitted with a twin socket outlet. All aresupplied with 5mtr lead and 230V versions are fittedwith BS approved plug.

Model No. SEE TABLE

D G-

E

TwinSocketOutlets

TwinSocketOutlets

D

Rechargeable Fluorescent Floor Light 2 x 18W

Twin daylight fluorescent tubes suitable forapplications where mains power is unavailable. Tubescan be selected to run individually or as a pair. Can bepowered from rechargeable cells or from a mainssupply cable - both stored integrally. Electronic controlallows unit to be used as an emergency light, switchingon in the event of mains power failure. Includes carry handle and floor stand or can also be wallmounted.

Tubes: 2 x 18WTube Length: 600mmMains Supply: 230V 50Hz 40mABattery: 6V 4.5AhOperating Time: 1 Tube: 3:45hr

2 Tubes: 1:45hrReplacement Tube: 003-SD1824D

AModel No. ML18/36

A B

230V

Fluorescent Floor Light 2 x 18W/230V

Fluorescent tubes mounted in impact resistant head.The light unit is supported on a folding steel floor stand.Fitted with BS approved plug and 5mtr cable.

Power: 2 x 18WInput: 230VReplacement Tube: ML36230F.20

BModel No. ML36230F

C

110V

Fluorescent Floor Light 2 x 18W110V with Power Take Off

Fluorescent tubes mounted in impact resistant head.The light unit is supported on a folding floor stand.Fitted with twin 1 10V socket outlet and 5mtr cable.Power: 2 x 18WInput: 110VReplacement Tube: ML36110F.FB

CModel No. ML36110F

TwinSocketOutlets

Tungsten/halogen tubes mounted in die-cast alloyheads. The light units are supported on a telescopic polewith locking rings. Folding tripod feet can be secured intwo positions on the base of the ML500X and ML1000Dmodels, allowing compact storage when not in use. Alllamps are supplied with 1.8mtr lead and 230V versionsare fitted with 13Amp BS approved plug.

Model No: Power/Input: Min/Max. Height:ML500X 500W/230V 1.2/1.8mtrML500/110VX 500W/110V 1.2/2.0mtr ML1000D 2 x 500W/230V 1.2/2.1mtr ML1000D/110V 2 x 500W/110V 1.2/2.1mtr

Replacement Tube 230V: ML500/01Replacement Tube 110V: ML500/110/01

Telescopic Floodlights

Model No. SEE BELOW

Extra-Heavy-DutyTungsten/HalogenFloodlights

Model No. SEE BELOW

Model: MLS500 MLT500 MLT1000 MLT1600Power: 1 x 500W 2 x 250W 2 x 500W 2 x (300W + 500W)Input: 230V 230V 230V 230VMin/Max. Height: 0.90/1.89mtr 0.73/1.08mtr 1.23/2.38mtr 1.28/2.38mtrCable Stowage: Yes No Yes YesCable Length: 3mtr 3mtr 5mtr 5mtrTelescopic Legs: 3 No 1 1Replacement Tube: ML500/01 MLT500.06 ML500/01 ML300/01 & ML500/01

D E F

A B

CABLE REELSFor more information onour extensive range ofcable reels, see pages 442 to 444.

230V

500W

230V

1000W

230V

1600W

110V

230V

500W

110V

230V

1000W

A B-

C F-

C D E F

AABB

Tungsten/halogen tubes mounted in adjustable die-cast alloy heads. Metal grilles protect lamps fromdamage and prevent hands coming into contact withhot lens. All tubes are individually switched. All modelsare weatherproof to IP44 and are supplied with 3mtrcable on MLS500 and ML T500 and 5mtr cable onMLT1000 and ML T1600. Fitted with ASTA/BSapproved 3-pin plug. All light units can be used free-standing or mounted on the telescopic tripodstand supplied. Each stand has folding tripod legs,which are telescopic on some models - seeSpecification Table - and cable storage hooks. Allmodels supplied with a spare tube in a protective case.

C

230V

500W

Section 9 Floodlights438

K

Tool Transformers - 110V

110Volt Transformers with tool rated performancesuitable for intermittent running of power tools andcontinuous running of lighting products within specifiedcapacity. Case manufactured from GRP and insulatedto class H. Fitted with thermostatic overload protection.Supplied with 16Amp/1 10Volt socket(s) and 2mtrthree-core cable.

Model No. SEE BELOWE

4-Way Splitter Box - 110V

Splits single line input four ways. Features powerindicator light. Suitable for running multiple powertools. Check transformer power output to ensureoverload does not occur.

Capacity: 4 x 16ACable: 3mtrPlug/Socket Standard: BSEN60309

JModel No. TR4/SB

JI

L

M

E H-

Model No: Power Tool Rating: Sockets:TR1000 1000VA 1TR1500 1500VA 2TR2000 2000VA 2TR3000 3000VA 2

F G H

Extension Cables - 110V

Model No: Length: Cable Core: Standard:TR14/1.5/110 14mtr 1.5mm2 BSEN60309TR14/2.5/110 14mtr 2.5mm2 BSEN60309


Splashproof Plug & Socket110V

Model No: Type: Standard:TR110VP Plug BSEN60309TR110VS Socket BSEN60309

Model No. SEE BELOW

L M-

G

EF

H

Model No: PI300 PI500 PI700 PI1000Input Voltage: 12V DC 12V DC 12V DC 12V DCOutput Voltage: 230V AC 230V AC 230V AC 230V ACContinuous Output: 300W 500W 700W 1000WMaximum Output: 600W 1000W 1400W 2000WOutput Frequency: 50Hz 50Hz 50Hz 50HzDimensions (L x W x H): 180 x 105 x 60mm 230 x 105 x 60mm 207 x 105 x 60mm 290 x 210 x 72mmSupply Connection: Cigarette Lighter Plug & Battery Clips Battery Clips Battery Clips Battery Terminals Leads

C D

Power Inverters 12V DC - 230V AC 50Hz

Supplies continuous smooth 230V power from 12V DC power supply found in cars, caravans, boats and HGVs. Suitable for powering small TVs, laptops, power tools andvarious other electrical equipment within the wattage rating of the inverter. Anodized aluminium case provides durability and maximum heat dissipation. Safety featuresinclude automatic overload shut-down and a low battery alarm to prevent damage to the supply battery. Supplied with cigarette lighter plug and/or battery clips dependingon model.

Model No. New SEE TABLE

C D

A D-

A

Inverter Generator 1000W

Digital inverter technology provides stable ‘clean’ outputmaking the unit suitable for use with sensitive electricalequipment such as computers. Smart throttle sensorautomatically adjusts the engine speed to preciselymatch the load, which allows the generator to runquieter whilst increasing fuel efficiency and lengtheningengine life. Fitted with 3-pin socket and 12V batterycharging outlet. Low oil cut-out and overload protection.

KModel No. G1000E

Motor Power: 1.3kW/1.7hpMotor Type: 4-StrokeFuel: Petrol Unleaded 95 RONOutput: 230V - 50Hz/12V DCCurrent Rating: 3.9A/8AContinuous Power Rating: 900WMaximum Power Rating: 1000WFuel Tank Capacity: 2.1ltrMaximum Running Time: 5hrNoise Rating LwA: 94dB.ADry Weight: 14kgDimensions (L x W x H): 460 x 235 x 400mm

B

BA

Section 9 Generator, Inverters & Transformers 439

LM

Industrial Generators

Heavy-duty industrial frame design provides full protection and aids portability. Suitable for running power tools and lighting units etc. Fitted with automatic voltage control whichprotects the unit and provides higher efficiency and a long running time of up to 12 hours on a full tank. Fitted with 12V battery charging outlet, 230V and 110V sockets. Powerfuland reliable generator fitted with maintenance-free brushless alternator . Smooth running unit fitted with anti-vibration mounti ngs. Low oil cut-out feature and fuel gauge.

C E-Model No. New SEE TABLE

C D E

Model No: GG2800 GG3800 GG7500Motor Power: 6.5hp 9hp 13hpMotor Type: 4-Stroke 4-Stroke 4-StrokeOutput: 230V/110V - 50Hz/12VDC 230V/110V - 50Hz/12VDC 230V/110V - 50Hz/12VDCCurrent Rating: 10.4A/21.8A/8.3A 14A/29A/8.3A 22A/45A/8.3AContinuous Power Rating: 2400W 3200W 5000WMaximum Power Rating: 2800W 3800W 6000WFuel Tank Capacity: 15ltr 25ltr 25ltrMaximum Running Time: 10hr 12hr 10hrNoise Rating LwA: 90dB 94dB 96dBDry Weight: 46.5kg 82kg 85kgDimensions (L x W x H): 623 x 480 x 538mm 713 x 541 x 569mm 713 x 541 x 569mm

A B

Model No: GG0720 GG1100Motor Power: 2hp 2.4hpMotor Type: 2-Stroke 4-StrokeOutput: 230V - 50Hz/12V DC 230V - 50Hz/12V DCCurrent Rating: 2.8A/5.8A 4A/8.3AContinuous Power Rating: 650W 900WMaximum Power Rating: 720W 1100WFuel Tank Capacity: 4.2ltr 6ltrMaximum Running Time: 6hr 6hrNoise Rating LwA: 91dB 90dBDry Weight: 18.5kg 25kgDimensions (L x W x H): 337 x 325 x 382mm 479 x 377 x 434mm

Generator 720W 230V 2hp

Compact and lightweight unit capable of running smalltools and lights etc. Ideal for roadside, site or leisureuse. Powerful and reliable generator fitted withmaintenance free brushless alternator. Fitted with 12Vbattery charging outlet, 230V 3-pin socket and toughcomposite carry handle.

AModel No. New GG0720

A

Generator 1100W 230V 2.4hp

Heavy-duty industrial frame design provides fullprotection and aids portability. Suitable for running powertools and lighting units etc. Running time of up to 6 hourson a full tank. Fitted with 12V battery charging outlet and230V 3-pin socket. Powerful and reliable generator fittedwith maintenance-free brushless alternator. Volt meterfitted to ensure constant power output. Smooth runningunit fitted with anti-vibration mountings.

BModel No. New GG1100

C

B230V 230V

12V

110V

230V

D 12V

110V

230V

E 12V

110V

230V

12V12V

Section 9 Generators440

Section 9 Generators 441

Wheel Kits for HG SeriesGenerators

As an optional extra, wheel kits are available formounting onto all HG Series generators. Kits includetwo wheels, handles and fittings. Please see below forrelevant kits.Model No: Suitability:GEN/KIT1 HG55.28 & HG65.30GEN/KIT2 HG90.44 & HG130.74


HONDA PowerGenerators

Powered by Honda OHC GC and OHV GX engines,these units offer quiet and refined power delivery. TheHG55.28 power unit is coupled to dual voltage brushlessalternator. The HG65.30, HG90.44 and HG130.74 unitspower high quality alternators and are for industrial orarduous applications. Honda power units are proven,reliable and are backed by a nationwide network ofservice agents.

Model No. SEE TABLE

CD

E F

Trailing Socket & Cable Set16A/13A

Fused adaptor converts 16Amp round socket totraditional 13Amp 3-pin socket.

Length: 500mm

HModel No. TR05/1.5/230

Model No: HG55.28 HG65.30 HG90.44 HG130.74Motor Power: 5.5hp 6.5hp 9hp 13hpMotor Type: Honda GX160 Honda GX200 Honda GX270 Honda GX390Output: 230V/110V - 50Hz 230V/110V - 50Hz 230V/110V - 50Hz 230V/110V - 50HzCurrent Rating: 10.9A/16.0A 12.2A/16.0A 16.1A/32.2A 23.9A/47.8AContinuous Power Rating: 2500W 2900W 3700W 5500WFuel Tank Capacity: 3.6ltr 3.6ltr 6.0ltr 6.5ltrRunning Time: 3.1hr 2.7hr 3.2hr 2.7hrNoise Rating LwA: 94dB 96dB 97dB 97dBDry Weight: 38kg 41kg 60kg 82kgDimensions (L x W x H): 590 x 460 x 430mm 590 x 460 x 430mm 710 x 570 x 490mm 760 x 570 x 590mm

G

H

C F-

POWERED by

Generator 800W 230V 2hp

Compact and lightweight unit capable of running smalltools and lights etc. Makes it ideal for roadside, buildingsites or leisure use. Powerful and reliable generatorfitted with maintenance-free brushless alternator. Fittedwith 12V battery charging outlet and 230V 3-pin socket.

AModel No. G950

A

Generator 2300W 230V 6.5hp

Heavy-duty frame design provides full protection andaids portability. Suitable for running power tools andlighting units etc. Long running, up to 10.5 hours on a fulltank. Fitted with two 230V 3-pin sockets. Powerful andreliable generator fitted with maintenance-free brushlessalternator. Smooth running unit fitted with anti-vibrationmountings. Low oil cut-out feature and fuel gauge.

BModel No. G2300

B

Model No: G950 G2300Motor Power: 2hp 6.5hpMotor Type: 2-Stroke 4-StrokeOutput: 230V - 50Hz/12V DC 230V - 50HzCurrent Rating: 3A/8.1A 9.1AContinuous Power Rating: 650W 2000WMaximum Power Rating: 800W 2300WFuel Tank Capacity: 4ltr 12ltrRunning Time: 6hr 10.5hrNoise Rating LwA: 91dB 97dBDry Weight: 20kg 41kgDimensions (L x W x H): 345 x 315 x 340mm 515 x 410 x 430mm

C D E F

BA

Section 9 Extension Leads & Cable Reels442

Extension Leads & Plugs

We of fer a complete range of sockets, plugs andextension leads. All plugs are manufactured by ASTAapproved licensee factories and meet BS standards.There are three grades of plug - all three fitted withapproved 13Amp fuses and PL/13/3 is manufacturedin the UK from very resilient, high percentage rubbercomposite. We recommend this plug for all garage and workshop use. All our black extension leadsincorporate this plug. White extension leads areintended for office and lighter duty applications.

Black Extension LeadModel No: EL5/1.5/2RSockets: 2Length: 4mtr

Black Extension LeadModel No: EL5/1.5/4RSockets: 4 (Fused)Length: 4mtr

White Extension LeadModel No: EL5/1.5/2RXSockets: 2Length: 4mtr

White Extension LeadModel No: EL2/1.5/4RXSockets: 4Length: 2mtr

13Amp Plug Extra-Heavy-DutyModel No: PL/13/3SPack Size: SingleModel No: PL/13/3Pack Size: Box of 10

13Amp Plug Heavy-DutyModel No: PL13/320SPack Size: SingleModel No: PL13/320Pack Size: Box of 20

Model No. SEE BELOWA B

C D

F

E F

Voltage: 230VCable Length: 10mtrCable Section: 3 x 1mm²Cable Type: PVCSockets: 3Thermal Trip: Drum Size: SmallDrum Type: CompositeCapacity Wound: 800WCapacity Unwound: 2200W

G

Composite Box Reel withThermal Trip 10mtr - 230V

Composite reel with fully enclosed cable. Features 3 x 230V olt power sockets and thermal overloadprotection. Built-in carry handle. Fitted with ASTA/BSapproved 3-pin plug.

Model No. CR10/1

G

A F-

10mtr

THERMALTRIP

A

B

C

E

D

Cassette Type Cable Reel 20mtr - 230V

Cassette style reel with 2 x 230V power sockets. Built-incarry handle. Fitted with ASTA/BS approved 3-pin plug.

Voltage: 230VCable Length: 20mtrCable Section: 3 x 1.25mm²Cable Type: PVCSockets: 2Drum Size: MediumDrum Type: CompositeCapacity Wound: 960WCapacity Unwound: 3120W

IModel No. BCR20CB

I

20mtr

Composite Box Reel 10mtr - 230V

Composite reel with fully enclosed cable and 2 x 230Vpower sockets. Fitted with ASTA/BS approved 3-pin plug.

Voltage: 230VCable Length: 10mtrCable Section: 3 x 1mm²Cable Type: PVCSockets: 2Drum Size: SmallDrum Type: CompositeCapacity Wound: 720WCapacity Unwound: 2400W

HModel No. BCR10B

H

10mtr

Section 9 Cable Reels 443

D

Cable Reels 230V

A comprehensive range to meet the dif ferentrequirements of the workshop, site, of fice or homeenvironments. All models manufactured to comply withthe latest BS standards. Two or three outlets fitteddepending on model, with many incorporating a thermaltrip which cuts supply if cable becomes overloaded.

When choosing which reel to suit your requirements wealways recommend that you go for the heaviest cablepossible and strongly suggest that you consider one of themodels fitted with an RCD unit, which reduces the risk ofelectrocution should the cable be severed during use.

Model No. SEE TABLE

Model No: BCR153T BCR253T BCR25 BCR2525 CR25/1.5 CR25/1.5/S CR25/2.5RSVoltage: 230V 230V 230V 230V 230V 230V 230VCable Length: 15mtr 25mtr 25mtr 25mtr 25mtr 25mtr 25mtrCable Section: 3 x 1.25mm² 3 x 1.25mm² 3 x 1.25mm² 3 x 2.5mm² 3 x 1.5mm² 3 x 1.5mm² 3 x 2.5mm²Cable Type: PVC PVC PVC PVC PVC PVC RubberSockets: 3 3 2 2 3 3 3Thermal Trip: - - Drum Size: Medium Medium Medium Medium Medium Medium LargeDrum Type: Composite Composite Composite Composite Composite Steel SteelCapacity Wound: 1000W 1000W 960W 1500W 1000W 1000W 1500WCapacity Unwound: 2950W 2950W 3120W 3500W 3500W 3500W 3500W

B C D E F G H

H

25mtr

25mtr

STEELDRUM

25mtr

THERMALTRIP

B H-

2.5mm2

Cable

E

25mtr

2.5mm2

Cable

G

STEELDRUM

25mtr

THERMALTRIP

F

THERMALTRIP

B C

25mtr

THERMALTRIP

15mtr

THERMALTRIP

Residual Current Detector(RCD)

Cuts power automatically to protect against electrocution.Suitable for all types of indoor and outdoor electricalappliances. Easy to use, two-button operation. No wiringneeded - plugs straight into 13Amp socket. No need toremove from socket to reset unit. Meets BS7071:1992.Voltage: 230VMaximum Load: 3kWMaximum Operating Current: 13ATrip Speed: 30msMaximum Trip Current: 30mA

AModel No. RCD981

A

Section 9 Cable Reels444

RCD Safety Cable Reels230V

Heavy-duty cable reels manufactured to EU standardsand fitted with Residual Current Detector to shut off powersupply in the event of earth leakage detection. Approvedto BS7071:1992. The RCD device greatly reduces the riskof electrocution and protects all appliances that areplugged into the cable reel. Particularly recommended foruse with pressure washers, water pumps, hedgetrimmers and all workshop power tools.

Model No. SEE TABLEA B

F

A B C D E F

D

E

Model No: BCR25RCD CRCD/25 BCR503T BCR50 CR50/1.5 BCR25110Voltage: 230V 230V 230V 230V 230V 110VCable Length: 25mtr 25mtr 50mtr 50mtr 50mtr 25mtrCable Section: 3 x 1.25mm² 3 x 1.5mm² 3 x 1.25mm² 3 x 1.25mm² 3 x 1.5mm² 3 x 1.5mm²Cable Type: PVC PVC PVC PVC PVC PVCSockets: 2 3 3 2 3 2Thermal Trip: - - -Drum Size: Medium Medium Medium Large Large MediumDrum Type: Composite Composite Composite Composite Composite CompositeCapacity Wound: 960W 1000W 1000W 960W 1000W 550WCapacity Unwound: 3120W 3500W 2950W 3120W 3500W 1760W

A B-

25mtr

25mtr

10mtr

50mtr

RCD

25mtr

RCD

THERMALTRIP

50mtr

THERMALTRIP

230V

G H-C

Cable Reels110V & 230V

A comprehensive range to meet the dif ferentrequirements of the workshop, site, of fice or homeenvironments. All models manufactured to comply withthe latest BS standards. Two or three outlets fitteddependent on model, with many incorporating a thermaltrip which cuts supply if cable becomes overloaded.

When choosing a reel to suit your requirements wealways recommend that you go for the heaviest cablepossible and strongly suggest that you consider one ofthe models fitted with an RCD unit, which reduces the riskof electrocution should the cable be severed during use.

Model No. SEE TABLE

C F-

50mtr

THERMALTRIP

or

15mtr

Retracting Cable Reels 230V

The ideal solution for workshops dogged by theproblem of trailing wires, can be wall or ceilingmounted. The cable is retracted by a simple pull andrelease action. Fitted with manual thermal trip switch toprevent overload.Model No: CRM10 CRM15Voltage: 230V 230VCable Length: 10mtr 15mtrCable Section: 3 x 1.5mm² 3 x 1.5mm²Thermal Trip: Capacity Wound: 800W 800WCapacity Unwound: 2000W 2000W

Model No. SEE BELOW

G H-

G H

110V

Section 10Welding & Cutting446 Portable MIG Welders448 Siegen MIG Welders449 Supermig Welders 451 Powermig Welders452 Electromig & Pulsemig Welders453 Welding Accessories457 Arc Welders458 Inverters460 TIG Inverters461 Plasma Inverters462 Plasma & Oxyacetylene463 Bottle Racks & Trolleys464 Spot Welders

Section 10 Portable MIG Welders446

Mightymig® Portable MIGWelders

Our range of Sealey portable MIG welders isprofessional in every sense. All feature heavy-dutyhigh output transformers and forced air cooling toensure the highest level of performance. Ourcontoured grip torches run cooler than any other andare comfortable in the hand, thus ensuring a steadierweld bead. All our PM series MIGs are supplied with ahand-held mask, disposable cylinder of CO2 gas, minigas regulator, spool of wire and torch. They can alsobe used with large, industrial CO2 gas bottles with anoptional adaptor kit. To weld aluminium, order a roll of0.8mm aluminium wire, a packet of 0.8mm contact tipsand a bottle of argon gas. See pages 453 to 456 fordetails of all our welding accessories.

Model No. SEE TABLE

B

GAS CYLINDERSNote: All models PM140XT andPM150XT are delivered with a disposable cylinder of gas. See page455 for details of our range of disposable gas cylinders. For bettereconomy we recommend our 1kg refillable cylinders. Please see yourlocal Sealey dealer for this service.

B CModel No: PM140XT PM150XTWelding Current: 35-140A 30-150AWire Capacity - Steel: 0.7-5.0kg 0.7-5.0kgWire Capacity - Aluminium: 0.5-2.0kg 0.5-2.0kgDuty Cycle: 100% @ 35A 100% @ 45A

60% @ 50A 60% @ 55A20% @ 90A 15% @ 115A

15% @ 105APenetration - Steel: 2.5-3.5mm 3.5-4.5mmPenetration - Aluminium: 4.0mm 5.0mmCooling System: Forced Air Forced AirGas Type: CO2, Argon, CO2/Argon Mix CO2, Argon, CO2/Argon MixTorch: Non-Live Non-LivePower Input: 230V - 1ph 230V - 1phAbsorbed Power: 4.0kW 4.3kW

B C-

C

130Amp MiniMIG Welder

Features heavy-duty high output transformer andforced-air cooling to ensure the highest level ofperformance. Contoured grip, non-live torch iscomfortable in the hand, thus ensuring a steadier weldbead. Includes hand-held mask, mini gas regulator ,spool of wire, contact tips 0.6 and 0.8mm.Welding Current: 30-130AWire Capacity - Steel: 0.7-5.0kgWire Capacity - Aluminium: 0.5-2.0kgDuty Cycle: 100% @ 30A, 60% @ 45A,40% @ 65A, 20% @ 80APenetration - Steel: 2.0mmPenetration - Aluminium: 3.0mmCooling System: Forced AirGas Type: CO2, Argon, CO2/Argon MixTorch: Non-LivePower Input: 230V - 1phAbsorbed Power: 2.8kW

AStock Code New S0771

A

Model No’ s PM140XT andPM150XT supplied completewith full range of accessories.

Welding Helmet Solar PoweredVariable Shade 9-13

Welding helmet with infinitely adjustable shade controlbetween 9 and 13. Complies to CE & DIN standards.Fully automatic switching from light to dark on strikingarc. Shade is selected by large rotary knob on side ofhelmet. Solar panel power supply - no batteriesrequired. Features sensitivity and delay controls forswitching light to dark. Deluxe contoured helmet withfully adjustable headband with front pad for addedcomfort. Suitable for MIG, TIG and arc welding.Shade Active: 9-13 VariableShade Inactive: 4Viewing Area: 98 x 48mmOperating Time:Light/Dark: 0.1msOperating Temperature: -5°C to +55°CStoring Temperature: -20°C to +70°CPower: Solar CellsWeight: 420g

DStock Code New S0825

D Solar Powered SHADE 9-13Variable

NonLive

Torch

NonLive

Torch

NonLive

Torch

Section 10 Portable MIG Welders 447

B C DModel No: PMG110 PMG135XT PMG155XTWelding Current: 55-90A 35-130A 45-150ANo Gas/Gas Operation: Dual Operation Dual Operation Dual OperationDuty Cycle: 20% @ 55A 100% @ 35A 100% @ 45A

10% @ 80A 20% @ 90A 60% @ 55A15% @ 105A 15% @ 115A

Penetration - Steel: 2.0-2.75mm 2.5-3.0mm 3.5mmPenetration - Aluminium: 3.5mm 4.0mm 4.5mmCooling System: Air Cooled Forced Air Forced AirTorch: Non-Live Non-Live Non-LivePower Input: 230V - 1ph 230V - 1ph 230V - 1phAbsorbed Power: 2.5kW 3.6kW 3.7kWConversion Kit: 120.802032 120.802032 120.802032Flux Cored Wire (0.9kg x Ø0.9mm): TG100/1 TG100/1 TG100/1Replacement Tips (Pack of 5): TG100/2 TG100/2 TG100/2

Our gasless MIG welders are supplied with a full kit of accessories including tips, nozzles, starter roll of wire and welding headshield.

D

Gasless welders fitted with strong wire-drive assemblies.

All models supplied with quality welding torch.

Models B, C & D feature integralpolarity reversal - essential for switching

between gas and gasless welding.

B

AirCooled~~~

Dualmig No Gas Portable Welders

Dualmig machines weld without gas using flux cored wire that creates its owngas shroud as it welds. Models PMG110 through PMG155XT are delivered ingasless mode, but can be converted for use with gas.

Model No. SEE BELOW

B D-

C

Universal Trolley for PortableMIG Welders

Robust trolley carries portable MIG welder and gasbottle, making relocation of welding equipment quickand easy. Fitted with two fixed wheels and two castorsfor excellent manoeuvrability . Supplied with bottleretaining chains and cable stowage hooks.Upper tray for MIG welder and two lower trays forassociated items. Suitable for portable MIG welders upto 300mm wide and 480mm long.Maximum Welder Width/Length: 300/480mmApplications: PM140XT*, PM150XT*, PMG110,

PMG135XT*, PMG155XT*, S0771* With wheels and axle removed.

AModel No. BTR4

A

DUALMIG VERSATILITYTo convert to gas, just order areel of regular wire, tips, bottleof gas and a conversion kit.The kit contains mini regulatorplus gas connection hose(Model No. 120.802032) for welders PMG110 toPMG155XT.

NonLive

Torch

NonLive

Torch

NonLive

Torch

Section 10 Siegen MIG Welders448

MIG Welders

Features heavy-duty high output transformer and forced-air cooling to ensure the highest level of performance.Suitable for welding with CO 2, Argon or CO2/Argon mix. Contoured grip, non-live torch is comfortable in thehand, thus ensuring a steadier weld bead. Includes industrial gas regulator, spool of wire, contact tips 0.6, 0.8mmand gas cup.

Stock Code: S0816 S0817Welding Current: 30-150A 30-180AWire Capacity - Steel: 0.7-5.0kg 0.7-5.0kgWire Capacity - Aluminium: 0.5-2.0kg 0.5-2.0kgDuty Cycle: 100% @ 50A, 75% @ 55A, 100% @ 56A, 75% @ 65A,

50% @ 66A, 20% @ 105A 60% @ 73A, 15% @ 145ACooling System: Forced Air Forced AirGas Type: CO2, Argon, CO2/Argon Mix CO2, Argon, CO2/Argon MixTorch: Non-Live Non-LivePower Input: 230V - 1ph 230V - 1phAbsorbed Power: 4.1kW 5.7kW

Stock Code New SEE BELOW

A B

A B-

C E

SHADE 11

D

SHADE 9-13 Variable SHADE 9-13 Variable

NonLive

Torch

NonLive

Torch

A B

Solar PoweredSolar PoweredSolar Powered

Automatic Solar PoweredWelding Helmets

High quality lenses with large viewing areamanufactured and tested to BSEN379. Shade 1 1 onPWH199 and variable shade 9-13 on PWH599 andPWH699. Fully automatic switching from light to darkon striking arc. Fitted with solar power panel - nobatteries required. PWH699 features infinitelyadjustable sensitivity and delay switches. All modelsfeature deluxe contoured helmets approved toBSEN175 which give full neck protection and protectslens from scratching when helmet is laid down.Comfortable headband and non-slip quick releaseratchet mechanism. Suitable for MIG and arc welding.See page 709 for full specification.Model No: Shade:

PWH199 New 11PWH599 9-13PWH699 New 9-13

CDE

C E-Model No. New SEE BELOW

Section 10 Supermig® Welders 449

SUPERMIG150 30-150A 5kg 100% @ 30A, 80% @ 50A, Forced Air No CO2, Argon, Non-Live 230V - 1ph 4.3kW Compact 26kg50% @ 70A, 10% @ 150A CO2/Argon Mix

SUPERMIG160 30-160A 5kg 100% @ 45A, 60% @ 80A, Forced Air No CO2, Argon, Non-Live 230V - 1ph 3.7kW Large 34kg20% @ 130A, 10% @ 150A CO2/Argon Mix

SUPERMIG180 30-180A 5kg 100% @ 60A, 60% @ 80A, Forced Air No CO2, Argon, Non-Live 230V - 1ph 5.2kW Large 37kg20% @ 140A, 10% @ 155A CO2/Argon Mix

SUPERMIG185 30-185A 5kg 100% @ 60A, 60% @ 80A, Forced Air Yes CO2, Argon, Euro 230V - 1ph 5.2kW Large 42kg20% @ 140A, 10% @ 160A CO2/Argon Mix Non-Live

SUPERMIG195 30-195A 5-15kg 100% @ 60A, 60% @ 80A, Forced Air Yes CO2, Argon, Euro 230V - 1ph 5.2kW Extra 44kg20% @ 140A, 10% @ 165A CO2/Argon Mix Non-Live Large

Model No: Welding Wire Duty Cycle: Cooling Spot Welding Gas Type: Torch: Power Absorbed Case Weight:Current: Capacity: System: Timer: Input: Power: Size:

A

B

C

D

E

Supermig® Welders

All our Supermig® models are suitable for welding withCO2, Argon or CO2/Argon mix. Each uses a Forced AirCooling System to slow transformer heating in order toincrease duty cycle and a non-live torch to prevent therisk of accidentally striking an arc. All models aresupplied with an industrial Argon/CO2 regulator. Weldersare illustrated with gas bottles only to give an indicationof size; gas is not included. A contract for the supply ofgas should be arranged with your local gas distributor.

Model No. SEE TABLEA B

NonLive

Torch

Spot-WeldTimer

Forced Air CoolingSystem directs airover the transformerslowing the heatingprocess in order toincrease duty cycle.

Euro Torch features fast actionconnection for easy maintenanceand mobility. Includes heat-proofcables and contour handle forcomfort and control.

Consistent control of weldperiod. Ideal for welding bodypanels. Essential function for allbody shops.

Fail-safed e v i c ehelps top reven taccidentalarc strike.

A E-

Gas Bottles not included

Gas Bottles not included

NonLive

Torch

E

Spot-WeldTimer

NonLive

Torch

NonLive

Torch

C

NonLive

Torch

D

Spot-WeldTimer

NonLive

Torch

Section 10 Supermig® Welders450


SUPERMIG220 40-220A 5-15kg 100% @ 70A, 60% @ 85A, Forced Air Yes CO2, Argon, Euro 230V - 1ph 6.0kW Extra 45kg15% @ 160A, 10% @ 170A CO2/Argon Mix Non-Live Large

SUPERMIG235 35-235A 5-15kg 100% @ 80A, Forced Air Yes CO2, Argon, Euro 230V - 1ph 7.0kW Extra 50kg60% @ 100A, 15% @ 180A CO2/Argon Mix Non-Live Large

SUPERMIG250/10 35-250A 5-15kg 100% @ 60A, 50% @ 120A Forced Air Yes CO2, Argon Euro 230V - 1ph 6.5kW Extra 57kg20% @ 195A, 15% @ 230A CO2/Argon Mix Non-Live Large

SUPERMIG270 40-270A 5-15kg 100% @ 100A, Forced Air Yes CO2, Argon, Euro 230V - 1ph 9.5kW Extra 62kg60% @ 150A, 20% @ 235A CO2/Argon Mix Non-Live Large

Supermig® Welders

All our Supermig® models are suitable for welding withCO2, Argon or CO2/Argon mix. Each uses a forced aircooling system to slow transformer heating in order toincrease duty cycle and a non-live torch to prevent therisk of accidentally striking an arc. SUPERMIG250/10features automatic wire feed system. All models aresupplied with an industrial Argon/CO2 regulator. Weldersare illustrated with gas bottles only to give an indicationof size; gas is not included. A contract for the supply ofgas should be arranged with your local gas distributor.

Model No. SEE TABLE

A D-

Gas Bottle not includedGas Bottle not included

MIG Torches with Euro Connection

Professional torches with contoured grip and heat-proofcable. Euro connection enables quick and simpleconnection to welder. No wiring means torch can bedisconnected and stored safely when not being used.

Model No: Length: Connector: Torch Type:MIG/T15 3.0mtr Euro TB15MIG/T25 3.0mtr Euro TB25MIG/T36 3.0mtr Euro TB36


E

B

Spot-WeldTimer

NonLive

Torch

D

Spot-WeldTimer

NonLive

Torch

Gas Bottle not included Gas Bottle not included

A

Spot-WeldTimer

NonLive

Torch

A

B

C

D

C

Spot-WeldTimer

NonLive

Torch

See page 709 for our fullrange of welding helmets.

WELDING HELMETS

Section 10 Powermig® Welders 451

Powermig® Welders

Tried and trusted by fabricators and professional carrepair shops across the UK. Superb quality , Swedishmade electronic wire drive motors and heavy-dutytransformers make these machines unmatched inperformance and value. Our three top of the range 3-phase units, are covered by the Sealey 12 monthwarranty plus an additional 24 months on the maintransformer. Each unit supplied with 0.8mm steel wire,non-live torch and industrial Argon/CO2 regulator. Allcan be used with CO 2, Argon or CO2/Argon mix andaccept any bottle size. Gas bottles not included.

Model No. SEE TABLE

A C-

Mild Steel MIG Wire - A18

Top quality wound welding wire manufactured to BSEN 440 Part 1.Model No: Weight: Diameter:MIG/888806 15kg 0.6mmMIG/888808 15kg 0.8mmMIG/888810 15kg 1.0mm

Model No. SEE BELOW

D

D

A

UMBILICAL LEAD ASSEMBLIESModel No: Length:120/802266 3mtr120.802267 9mtr


POWERMIG2750 35-275A 5-15kg 100% @ 130A, 60% @ 160A, Turbo Fan Yes CO2, Argon, Euro 415V - 3ph 8.0kW Extra 60kg30% @ 240A, 10% @ 260A CO2/Argon Mix Non-Live Large



NonLive

Torch

Spot-WeldTimer

Spot-WeldTimer

B

NonLive

Torch

C

PortableWire Drive

Spot-WeldTimer

NonLive

Torch

PortableWire Drive

Gas Bottle not included



PORTABLE WIRE DEVICE

The POWERMIG3500 and POWERMIG4500 featureportable wire drives. They can be stored inside or on topof the welder or can even be carried up a ladder whenused with an optional umbilical extension. This makesthem ideal for fabricators and commercial vehicle use.

A

B

C

MIG TIPS & GAS NOZZLESSee page 454 for our full range of Tips & Nozzles.

Section 10 Electromig & Pulsemig Welders452

Electromig Welder 195Amp

Microprocessor controlled MIG welder with forced aircooling. Electronic control and smooth power supplymake this model especially suitable for welding steel,stainless steel, galvanized steel, high stress steel and aluminium. Also incorporates settings for brazing -ideal for joining/repairing steel body panels. Modelfeatures push button selection of operating parametersincluding material, gas type, wire diameter andprogrammable function for saving frequently usedconfigurations. Use with optional Spool-On-Gun weldingtorches (Model No’s. MIG/SGT15 - 6mtr, MIG/SGT15/12 -12mtr) for trouble-free aluminium welding.

Welding Current: 30-195AWire Capacity: 5-15kgDuty Cycle: 100% @ 60A

60% @ 80A20% @ 140A15% @ 180A

Cooling System: Forced AirSpot Welding Timer: YesGas Type: CO2, Argon, CO2/Argon MixTorch: Euro Non-LivePower Input: 230V - 1phAbsorbed Power: 5.2kWCase Size: LargeWeight: 41kg

AModel No. ELECTROMIG195

Synergic Pulsemig200Amp

Microprocessor controlled, single phase, fan cooledpower supply for MIG/MAG, TIG, MMA electrode, fluxand arc welding plus brazing applications. Synergicoperation gives ef ficient welding control and isparticularly useful when welding aluminium, galvanizedsheets, high strength steel and stainless steel. LEDpower read-out with push-button programming inconjunction with an encoder knob. The unit featuresregulation of post-gas and current down-slope time aswell as control of AC balance and arc force. When TIGwelding, the current can be set to change from onepreset value to another using the torch button. HF or liftstart (for reduced HF emissions) can be selected.Fifteen Synergic welding programmes and capacity tostore ten further personalized programmes. Includesremote control connection for foot pedal or hand control. Supplied without accessories.Use with optional Spool-On-Gun welding torches(Model No’ s. MIG/SGT15 - 6mtr , MIG/SGT15/12 -12mtr) for trouble free aluminium welding.

Model No. PULSEMIG225

A

Spool-On-Gun Torches TB15

Specifically designed for use with the SealeyELECTROMIG195 and PULSEMIG225 for aluminiumwelding. Electronic compatibility between torch andwelder allows communication of wire drive settings forsmooth and consistent quality of weld. Additionally, theclose proximity of spool to weld dramatically reduceswire drive problems normally associated withaluminium welding. Accepts standard TB15 torchwelding consumables.Model No: Cable Length:MIG/SGT15 6mtrMIG/SGT15/12 12mtr


NonLive

Torch

Spot-WeldTimer

ElectronicControl

B

Output: 5-200ADuty Cycle: 60% @ 160AElectrode Capacity: Ø1.6-4.0mmAbsorbed Power: 6kWMains Voltage: 230V - 1phInsulation Class: HProtection: IP23Cooling System: Forced AirWeight: 24kgArc Accessory Kit (Optional): INV/25MIG Accessory Kit (Optional): 120.801160TIG Torch* (Optional): 120.742058Aluminium MIG Accessory Kit (Optional): 120.802279Foot Pedal (Optional): INV/TIG/5Current Control (Optional): INV/TIG/7Trolley (Optional): 120.803051

Optional Trolley for PULSEMIG225

Model No. 120.803051

C

C

120.801160MIG Welding Kit

120.742058TIG Welding Kit

120.802279Aluminium MIG Welding Kit

INV/25Arc Welding Kit

WELDING GAUNTLETSSee pages 708 & 709 for detailsof our W elding Gauntlets andother Welding Protection.

* Use in conjunction with MIG Accessory Kit

L-Tip Locking Grip

Model No: AK6832Length: 195mmJaw Capacity: 0-18mmJaw Width: 18mm

Fabrication/Welding LockingGrips One-Handed Operation

Manufactured with rounded contours for smooth, securehandling. Grips feature linear jaw action which appliespressure perpendicular to the workpiece for secureclamping. Compact size with push-button jaw release isideal for working in confined spaces. Thumb release actionallows one-handed operation. Suitable for a wide varietyof applications including welding, glueing and riveting.

Model No. SEE BELOW

LL-Tip Locking Grip

Model No: AK6833Length: 210mmJaw Capacity: 0-15mmJaw Width: 40mmThroat Depth: 9mm

BA

J-Tip Locking Grip

Model No: AK6835Length: 205mmJaw Capacity: 0-15mmJaw Width: 18mmThroat Depth: 7mmLip Depth: 14mm

D JJ-Tip Locking Grip


EW-Tip Locking Grip


C

C

Welding Curtain with WorkshopFrame

Supplied with welding screen to BSEN1598. Suitablefor use in workshops where the glare from welding andcutting may be a hazard to others. Supplied with twofeet. Curtain and frame supplied flat packed,assembles with ease.Size (W x H): 1.3 x 1.9mtr

GModel No. SSP99

Add-On Welding Curtain withWorkshop Frame

Designed to extend SSP99 welding frame and curtain.Kit comprises of one upright and foot, 2 horizontals andwelding curtain to BSEN1598. Once joined to SSP99,entire assembly can be hinged on centre joint. Two add-on units can be attached to SSP99, one each side.Size (W x H): 1.3 x 1.9mtr

HModel No. SSP990

HG

ClearVision® Welding HelmetVariable Shade 9 to 13

High quality variable shade 9-13 lens manufactured andtested to BSEN379. Fully automatic switching from light todark on striking arc. Fitted with solar power panel - nobatteries required. Features sensitivity and speed controlsfor switching light to dark. This prevents arc eye whenwelding at high power whilst still providing fast switchingfor tack welding. Deluxe contoured helmet designapproved to BSEN175 gives full neck protection andprotects lens from scratching when helmet is laid down.Comfortable headband and non-slip quick release ratchetmechanism. Suitable for MIG, TIG and arc welding.Shade Active: 9-13 VariableShade Inactive: 4Viewing Area: 98 x 38mmUV/IR Protection: YesOperating Time:Light/Dark: 0.05msTemperature Range: -5°C to +55°CPower: Solar Cells

JModel No. PWH599

J

Solar Powered

F

A E-

LOCKING GRIPSAvailable as a 5pc set,Model No. AK68402Contains AK6832,AK6833, AK6835,AK6836 & AK6837.

See page 96 for more details.

BA

D E

Welding Fume Extractor

Stand-alone extractor designed to filter out harmfulfumes from the atmosphere. Fitted with spark andcharcoal filter to remove large concentrations ofozone gas from fumes, this unit is recommendedfor professional use. Supplied with extractor hoseand collector nozzle. 230Volt Power supply required.

Dimensions (L x W x H): 530 x 250 x 360mmHose Length: 5mtrMotor: 1000WCapacity: 150m³/hrSupply: 230V - 1phWeight: 18kg

FModel No. WFS/94

LeatherWelding Apron

Comfortable leather weldingapron with ties.

Height: 900mmWidth: 600mm

IModel No. SSP/LWA

SAFETY PRODUCTS See pages 707 to 717 of thiscatalogue for our full range ofSafety Products.

Section 10 Welding Accessories 453

Mild Steel Welding Wire - A18Model No: Weight: Diameter:

MIG/7K06 0.7kg 0.6mmMIG/7K08 0.7kg 0.8mmMIG/777706 5.0kg 0.6mmMIG/777708 5.0kg 0.8mmMIG/888806 15.0kg 0.6mmMIG/888808 15.0kg 0.8mmMIG/888810 15.0kg 1.0mm

Flux Cored Welding Wire - E71T-GSModel No: Weight: Diameter:

TG100/1 0.9kg 0.9mm

Aluminium Welding Wire - 5356(NG6)Model No: Weight: Diameter:

MIG/5K08A 0.5kg 0.8mmMIG/2KAL08 2.0kg 0.8mmMIG/2/KAL/1 2.0kg 1.0mmStainless Steel Welding Wire - 308(S)93

Model No: Weight: Diameter:MIG/1K/SS08 1.0kg 0.8mmMIG/5K/SS08 5.0kg 0.8mmCopper Silicon Bronze Welding Wire - C9

Model No: Weight: Diameter:MIG/4K/BW08 4.0kg 0.8mmF

E

D

C

MIG Tips & Nozzles

A comprehensive range of MIG tips and nozzles to fit a wide variety of welding machines - not just Sealey.

Quality European manufactured components give long life and value for money.


Minimig/Mightymig® RangeCompatible with TB14 Torches

Model No: Description: Pack Qty:MIG950 Gas Cup 5pc120/722054 Gas Cup 1pcMIG951 Contact Tip 0.6mm 5pc120/722661 Contact Tip 0.6mm 1pcMIG952 Contact Tip 0.8mm 5pc120/722667 Contact Tip 0.8mm 1pcMIG953 1 x Gas Cup 1Set

3 x Contact Tip 0.6mmMIG954 1 x Gas Cup 1Set

3 x Contact Tip 0.8mm

Model No. SEE BELOW

Siegen/Supermig®/Electromig/Powermig® Range - Compatible withTB14/15 TorchesModel No. SEE BELOW

Gasless Welding Contact Tips

Model No: Description: Pack Qty:TG100/2 Contact Tip 0.9mm 5pcTG100/3 Contact Tip 1.0mm 5pc

Model No. SEE BELOW

Powermig®4500 Compatible with TB36 Torches

Model No: Description: Pack Qty:MIG924 Gas Cup 2pcMIG925 Tip Adaptor 2pcMIG926 Ceramic Diffuser 2pc120/722793 Thin Headed Nozzle 1pc120/722794 Spot Welding Nozzle 1pc

Model No. SEE BELOW

Powermig® 2750/3500Compatible with TB25 Torch

Model No: Description: Pack Qty:MIG913 Diffuser Adaptor 2pcMIG914 Nozzle Spring 2pcMIG915 Gas Cup 2pc120/722684 Cylinder Nozzle 1pc120/722686 Thin Headed Nozzle 1pc120/722687 Spot Welding Nozzle 1pc

Powermig® 2750/3500/4500 Tip KitsCompatible with TB25/36 Torches

Model No: Description: Pack Qty:MIG916 Contact Tip 0.6mm 5pcMIG917 Contact Tip 0.8mm 5pcMIG918 Contact Tip 1.0mm 5pcMIG919 Contact Tip 1.2mm 5pcMIG920 Contact Tip 1.6mm 5pcMIG921 Contact Tip 1.0mm Ally 5pcMIG922 Contact Tip 1.2mm Ally 5pcMIG923 Contact Tip 1.6mm Ally 5pc

Model No. SEE BELOW

Model No. SEE BELOW

Welding Wire

Top quality wound welding wire manufactured to BSEN440 Part 1.Model No. SEE BELOW

B F-

A

A

B

D

F

E

CB

Model No: Description: Pack Qty:MIG955 Gas Cup 3pc120/722423 Gas Cup 1pcMIG956 Contact Tip 0.6mm 5pc120/722415 Contact Tip 0.6mm 1pcMIG957 Contact Tip 0.8mm 5pc120/722416 Contact Tip 0.8mm 1pcMIG912 Contact Tip 1.0mm 2pcMIG927 Contact Tip 0.8mm Ally 2pcMIG928 Contact Tip 1.0mm Ally 2pc120/722149 Cylinder Nozzle 1pc120/722150 Spot Weld Nozzle 1pc120/722151 Thin Headed Nozzle 1pc120/722672 Stud Welding Nozzle 1pc120/722319 Nozzle Spring 1pc

Section 10 Welding Accessories454

Gas Regulators

Top quality European made regulators to EN585 and ISO2503.

Industrial regulators fit CO 2, Argon and CO2/Argon mix gas cylinders, using adaptors where applicable.

Suitable for industrial gas cylinders. Suitable for mini refillable/disposable gas

cylinders. Maximum operating pressure of 4bar for all models.

Industrial Gas CylinderAdaptor Kits

Convert the small-bore hosing (normally Ø4mm OD)found on portable MIGs for use with industrial size gasregulators and cylinders. Order just the bull noseadaptor (120/432102) and hose (AK9) or a completekit including regulator (REG/KIT/MZ or REG/KIT/MO).

Model No: REG/KIT/MZHose Length: 1.5mtrRegulator: REG/MZ

Model No: REG/KIT/MOHose Length: 1.5mtrRegulator: REG/MO

Model No: 120/432102Description: Bull Nose Adaptor

Model No: AK9Description: 1.5mtr Gas Hose Adaptor

Model No. SEE BELOW

I J

A B

I

J

I J-

Model No: REG/MZ REG/MO REG/MT REG/MX REG/MTHD REG/MM REG/MMG REG/MMGTCylinder Type: Industrial Industrial Industrial Industrial IndustrialGauge(s): 0 1 2 1 2 0 1 2Argon/CO2 Adaptor: Yes Yes Yes Yes Yes n/a n/a n/aSafe Cylinder Pressure: 230bar 230bar 230bar 230bar 230bar 110bar 110bar 110barMax. Throughput (ltr/min): 10 10 10 30 30 6 6 6

A

A EF H

B C D E F G H

Disposable Gas Cylinders

Portable sized disposable cylinders for the mobile welder.Fits Siegen, Sealey and other makes of welder/regulator.When comparing price, always check fill weights.Model No: Fill Welding Gas Type:

Weight: Duration*:CO2/100 390g 1-1/4hr CO2CO2/101 600g 2hr CO2MIG/ARG/100 300g 1hr ArgonMIG/MIX/100 300g 1hr CO2/Argon Mix


K DISPOSABLE L

REFILLABLE

CO2 Refillable Gas Cylinder

Portable sized CO2 refillable gas cylinder for the jobbingwelder. Gives value for money, repaying investment in just afew fills. Suitable for Siegen Minimig and Sealey Mightymig®welders. Will also fit other makes of welder/regulator . Refill exchange service available through local distributors.Fill Weight: 1kgWelding Duration*: 3.3hr

LModel No. CO2/1KG

E F G H

390gFILL

600gFILL

300gFILL

1kgFILL

300gFILL* Welding duration is approximate and depends

on machine settings.

C D

-

-

Model No. SEE RIGHT

A H-

CO2/ARGON

CO2

ARGON

CO2

Mini Refillable/Disposable

Section 10 Welding Accessories 455

A B

C

E

Magnetic Quick Clamp Set 2pc

Ideal for welders and fabricators. Strong magnets holdferrous metals in place during welding and assembly .Clamps incorporate angled edges for accurate alignment.Clamp 1 - Angles: 30°, 90°, 135°Clamp 2 - Angles: 30°, 45°, 60°, 75°, 90°

FModel No. MQC2

F

ELECTRONIC SURGEPROTECTION

Before carrying out weldingon a motor vehicle, westrongly recommend the attachment of a surge protection device acrossthe vehicle’ s battery. Seepage 213 for further details.

Spark Proof Welding Blanket

Neoprene coated glass fibre blanket tested to BS476Pt.1, Pt.7, Pt.20 and UK building regulations Class 0.Protects against the spray of sparks from welding andcutting.

Size: 1800 x 1300mm

HModel No. SSP23

H

300ml

Welder’s Pliers

Drop-forged steel construction. Six function toolincludes nozzle and tip installation grips, wire cutters,nozzle cleaner, slag hammer and long nose pliers.Fitted with spring loaded, fully insulated handles.Length: 215mm

DModel No. WP94

Swivel Torch with Euro Connection

Revolutionary design enables complete torch handleto rotate 360° without twisting wires. Suitable for usewith any machine fitted with Euro connection andrequiring TB15 type torch.

Length: 3.0mtrTorch Type: TB15

BModel No. MIG/ST15

Anti-Spatter Pressure Spray

Extremely ef fective anti-spatter spray preventingspatter build-up on fixings, jigs and welding nozzles.Contains rust inhibitor to prevent corrosion. Newinnovative pressure spray system allows 99% of theactive product to be expelled from the can. Up to sixtimes the life of normal aerosols.

Safe to use. Non-toxic. No acrid fumes. Recycleable tin. Environmentally friendly. Cleaner, easier and tidier welding.

CModel No. MIG/722308

D

Illustrations show wire feed linerremoved from umbilical cable.

Multi-Angle Magnetic QuickClamp

Designed to hold ferrous sheet and tube. The angles of30°, 45°, 60°, 75° and 90° are marked for quick reference.Suitable for a variety of welding and assembly jobs.Angles: 30°, 45°, 60°, 75°, 90°

GModel No. MQC1

G

Nozzle Cleaning Tool

Retracting three-legged scraper for cleaning spatterfrom welding nozzles.

EModel No. AK107

MIG Torches with Euro Connection

Professional torches with contoured grip and heat-proofcable. Euro connection enables quick and simpleconnection to welder . No wiring means torch can bedisconnected and stored safely when not being used.

Model No: Length: Connector: Torch Type:MIG/T15 3.0mtr Euro TB15MIG/T25 3.0mtr Euro TB25MIG/T36 3.0mtr Euro TB36


Section 10 Welding Accessories456

Section 10 Arc Welders 457

AHeavy-Duty Air CooledArc Welders

Manufactured in Europe to exacting standards thesemodels meet all relevant EU requirements. Fitted withforced air cooling systems*, these welders haveincreased duty cycle and performance. All modelsfeature a single, vented, wraparound shell fitted to aheavy-duty chassis. Screw type, stepless weldingcontrol allows fine adjustment of current. Each welder isfitted with carry handle with extension bar* and set ofwheels for added mobility. All models have completeaccessory kit including electrode holder, cables, earthclamp, chipping hammer/wire brush and welding mask.*Except model 150XL.

Model No. SEE TABLE

Model No: 180XTD 210XTD 260XTDWelding Current: 35-180A 35-210A(230V), 80-210A(415V) 35-210A(230V), 80-260A(415V)Electrode Capacity: Ø2.0-4.0mm Ø2.0-5.0mm Ø2.0-5.0mmCooling: Forced Air Forced Air Forced AirOutput Cable: 16mm² 25mm² 25mm²No-Load Voltage: 48V 48V 48VSupply: 230V - 1ph 230V - 1ph, 415V - 3ph 230V - 1ph, 415V - 3phAbsorbed Power: 5.0kW 6.0kW 6.0kWWeight: 24kg 39kg 39kg

B

C D

Extra-Heavy-Duty ForcedAir Cooled Arc Welders

This range of arc welders of fers robust, heavyweighttransformers with forced air cooling systems forincreased duty cycles at all amperages. Manufacturedin Europe these models meet all relevant EU standards.210XTD and 260XTD feature dual voltage input for useon 230V-1ph or, for higher performance, on 415V-3ph.All models supplied with complete accessory kitincluding electrode holder , cables, earth clamp, chipping hammer/wire brush and welding mask.

Model No. SEE RIGHT

E G-

G

AirCooled~~~

A D-

E

E F G

F

Model No: 150XL 150XTC 160XTC 200XTCWelding Current: 40-150A 40-150A 55-160A 55-200AElectrode Capacity: Ø1.6-3.2mm Ø1.6-3.2mm Ø2.0-4.0mm Ø2.0-4.0mmCooling: Air Forced Air Forced Air Forced AirOutput Cable: 10mm² 10mm² 16mm² 16mm²No-Load Voltage: 48V 48V 49V 52VSupply: 230V - 1ph 230V - 1ph 230V - 1ph 230V - 1phAbsorbed Power: 3.35kW 3.35kW 5.98kW 5.98kWWeight: 20kg 20kg 21kg 27kg

A B C D

All models suppliedwith accessory kit.

Inverter Kit 130Amp

Suitable for arc welding or for TIG welding (option) usingscratch-start method. Automatic Arc-Force circuitrymakes the unit suitable for arc welding with a wide varietyof rods including rutile, basic and stainless from Ø1.6mmup to Ø3.2mm. Also includes thermal cut-out and mainsvoltage LEDs. Fitted with Hot-Start system to counterelectrode sticking during scratch starting. Supplied incarry-case with 10mm² arc welding accessory kit (ModelNo. INV/10) and shoulder strap. Also suitable for TIGwelding with optional TIG accessory kit.Optional TIG Accessory Kit: INV/TIG

BModel No. MW130

B

Inverter Kit 95Amp

Suitable for arc welding or for TIG welding (option) usingscratch-start method. Automatic Arc-Force circuitrymakes the unit suitable for arc welding with a wide varietyof rods including rutile, basic and stainless from Ø1.6mmup to Ø2.5mm. Also includes thermal cut-out and mainsvoltage LEDs. Fitted with Hot-Start system to counterelectrode sticking during scratch starting. Supplied incarry-case with 6mm² arc welding accessory kit. Alsosuitable for TIG welding with optional TIG accessory kit.Optional TIG Accessory Kit: INV/TIG

AModel No. MW95

A

Inverter 140Amp

Inverter power supply suitable for arc or TIG weldingapplications using scratch-start method. Arc-Forcecircuitry makes the unit suitable for arc welding a widevariety of rods including rutile, basic and stainless fromØ1.6mm up to Ø3.2mm. Also includes thermal cut-outand mains voltage LEDs. Fitted with Hot-Start systemto counter electrode sticking during scratch starting.Supplied without accessories. Optional Arc Accessory Kit: INV/10Optional TIG Accessory Kit: INV/TIG

CModel No. MW140

Inverters

Lightweight, powerful and incredibly versatile, invertersoffer many advantages over traditional transformer typewelders. Inverters use state-of-the-art electroniccomponents to produce fully portable power sources forarc, TIG and plasma processes. For example, the MW95will produce up to 80Amps at 10% duty cycle. Weighingin at just 2.9kg makes it ideal for the mobile technician orfor applications where the power unit needs to be takento the job. Just compare our MW140 against a standard air-cooled welder:

Standard 140A Welder: MW140:Power Output: 140A 130ADuty Cycle: 10% 25% Weight: 15kg 5kg

C

Inverter 140Amp with SurgeProtection

The same specification as the MW140, but with theadded feature of built-in surge protection. Makes thismachine ideal for use with a generator where thepower input fluctuates. Minimum generator output of3.75kW required. Supplied without accessories.Optional Arc Accessory Kit: INV/16Optional TIG Accessory Kit: INV/TIG

DModel No. MW140PLUS

D

A B C D

MW95 and MW130 are supplied ready to weld with arc welding accessory kit. Complete set is packed into compositecarry-case.

Model No: MW95 MW130 MW140 MW140PLUSPeak Power: 95A 130A 140A 140APower Output: 5-80A 5-125A 5-130A 5-130ADuty Cycle: 10% @ 80A 15% @ 125A 25% @ 130A 25% @ 130AElectrode Capacity: Ø1.6-2.5mm Ø1.6-3.2mm Ø1.6-3.2mm Ø1.6-3.2mmAbsorbed Power: 2.5kW 3.5kW 4.0kW 4.2kWSupply: 230V - 1ph 230V - 1ph 230V - 1ph 230V - 1phInsulation Class: H H H HProtection: IP21 IP21 IP23 IP23Weight: 2.9kg 3.7kg 4.3kg 5.1kgAccessories Included: Yes Yes No NoArc Accessory Kit: Included INV/10* INV/10 INV/10TIG Accessory Kit (Optional): INV/TIG INV/TIG INV/TIG INV/TIG*Included as standard.

Arc & TIG Welding Accessory Kits for Inverters

Suitable for Sealey and other inverters fitted with Dinseconnectors.Model No: INV/10 Arc Welding Accessory Kit 10mm²Contents: Electrode Holder & 3mtr x 10mm2 Cable,Earth Clamp & 2mtr x 10mm 2 Cable, Chipping Hammer/Brush, HandshieldApplications: MW95, MW100, MW130, MW140,MW145

Model No: INV/16Arc Welding Accessory Kit 16mm²Contents: Electrode Holder & 3mtr x 16mm2 Cable,Earth Clamp & 2mtr x 16mm 2 Cable, Chipping Hammer/Brush, HandshieldApplications: MW140PLUS, MW160PLUS,MW170, TIG130HF

Model No: INV/25 Arc Welding Accessory Kit 25mm²Contents: Electrode Holder & 3mtr x 25mm² Cable,Earth Clamp & 2mtr x 25mm² Cable, Chipping Hammer/Brush,HandshieldApplications: TIG175HF, PULSEMIG225

Model No: INV/TIG TIG Welding Accessory Kit Contents: TIG Torch with On-Gun Gas Control, GasRegulator, Earth Clamp & 2mtr x 16mm 2 Cable, HandshieldApplications: MW95, MW100, MW130, MW140,MW140PLUS, MW145, MW160PLUS, MW170

All inverters can be used for TIG welding. Order optional kitINV/TIG. Includes torch with on-gun gas control.

INV/10 - INV/16

INV/25

INV/TIG

Section 10 Inverters458

Section 10 Inverters 459

Inverter 130Amp 110V/230V

Inverter power supply suitable for arc or TIG weldingapplications using scratch-start method. Features autopower sensor, automatically switching between 110V or230V power supplies - ideal for site applications. Arc-Force circuitry makes the unit suitable for arc welding witha wide variety of rods including rutile, basic and stainlessfrom Ø1.6mm up to Ø3.2mm. Also includes thermalcut-out and mains voltage LEDs. Fitted with Hot-Startsystem to counter electrode sticking during scratchstarting. Supplied without accessories. Optional Arc Accessory Kit: INV/10Optional TIG Accessory Kit: INV/TIG

AModel No. MW145

A

Inverter 160Amp with SurgeProtection

Fan-cooled inverter for direct current TIG and arc weldingapplications. Suitable for welding steel, deoxidisedcopper, nickel and titanium. Features surge protection,allowing the unit to be powered by a generator. Minimumgenerator output of 7kW required. Equipped withshoulder strap. Supplied without accessories.Optional Arc Accessory Kit: INV/16Optional TIG Accessory Kit: INV/TIG

BModel No. MW160PLUS

B

Inverter 170Amp

Inverter power supply suitable for arc or TIG weldingapplications using scratch-start method. Featuresmanual Arc-Force control making the unit suitable forarc welding a wide variety of rods including rutile, basicand stainless from Ø1.6mm up to 4.0mm. Also includesthermal cut-out and mains voltage LEDs. Fitted withHot-Start system to counter electrode sticking duringscratch starting. Supplied without accessories.Optional Arc Accessory Kit: INV/16Optional TIG Accessory Kit: INV/TIG

CModel No. MW170

C

INVERTER TYPEMATERIAL ARC TIG DC TIG AC/DCMild Steel Stainless Steel Cast Iron Aluminium Copper Brass * Nickel Titanium

Optional accessory kits available for both TIG and arcwelding consisting of torch, earth clamp, helmet andchipping hammer . INV/TIG kits also include a regulator. See opposite page for details.

This table shows the materials which can be weldedwith the inverter models from the Sealey range.

*Note: Not all types.

MW145 is fitted withcircuitry which sensessupply voltage anda u t o m a t i c a l l yswitches between110V and 230V. It istherefore ideal for the mobile technician whereavailable voltagesmay vary betweenlocations.

Safety Products

To compliment our range of welders and accessories,we also stock a range of welding safety equipment.All products are CE approved and conform to therelevant British standards. See pages 707 to 717 forour complete range of safety products.

D

D

A B C

DualVoltage

A

ACCESSORY KIT APPLICATIONS

ARC WELDING TIG WELDINGMW95 INCLUDED INV/TIGMW130 INCLUDED INV/TIGMW140 INV/10 INV/TIGMW140PLUS INV/10 INV/TIGMW145 INV/10 INV/TIGMW160PLUS INV/16 INV/TIGMW170 INV/16 INV/TIGPULSEMIG225 INV/25 120.742058TIG130HF INV/16 INCLUDEDTIG175HF INV/25 INCLUDED

Model No: MW145 MW160PLUS MW170Peak Power: 145A 160A 170APower Output: 5-100/130A 5-150A 5-160ADuty Cycle: 40/25% @ 100/130A 35% @150A 35% @ 160AElectrode Capacity: Ø1.6-3.2mm Ø1.6-4.0mm Ø1.6-4.0mmAbsorbed Power: 3.4kW 4.5kW 4.5kWSupply: 110V/230V - 1ph 230V - 1ph 230V - 1phInsulation Class: H H HProtection: IP23 IP23 IP23Weight: 5.1kg 6.5kg 6.1kgAccessories:Arc Accessory Kit (Optional): INV/10 INV/16 INV/16TIG Accessory Kit (Optional): INV/TIG INV/TIG INV/TIG

INV/10 - INV/16

INV/25

INV/TIG

TIG Inverter 130Amp DC HF Lift Start

Fan-cooled DC power supply for TIG and arc weldingapplications. Suitable for welding steels, deoxidisedcopper, nickel and titanium. TIG cycle includes currentdown-slope regulation. Features HF or lift striking.Includes remote control connector for foot pedal orhand controller. Supplied with shoulder strap.Optional Arc Accessory Kit: INV/16

AModel No. TIG130HF

TIG Inverter 160Amp AC/DC HF Lift Start

Fan-cooled AC/DC power supply for TIG and arc weldingapplications. Suitable for welding steel, deoxidisedcopper, nickel, titanium and aluminium. LED power read-out with push-button programming in conjunctionwith an encoder knob. The unit features regulation ofpost-gas and current down-slope time as well as controlof AC balance and arc force. When TIG welding, thecurrent can be set to change from one preset value toanother using the torch button. HF or lift start (forreduced HF emissions) can be selected. Includesremote control connection for foot pedal or hand control.Supplied with shoulder strap.Optional Arc Accessory Kit: INV/25

BModel No. TIG175HF

A

Model No: TIG130HF TIG175HFPower Output: 5-130A 5-160ADuty Cycle: 60% @ 73A 60% @ 90AElectrode Capacity: Ø1.6-3.2mm Ø1.6-4.0mmAbsorbed Power: 3.7kW 4.5kWSupply: 230V - 1ph 230V - 1phInsulation Class: H HProtection: IP21 IP23Weight: 5.3kg 13kgTIG Accessories Included: Yes YesArc Accessory Kit (Optional): INV/16 INV/25Foot Pedal (Optional): INV/TIG/5 INV/TIG/5Current Control (Optional): INV/TIG/7 INV/TIG/7

D

Arc Welding Accessory Kitsfor Inverters

Suitable for Sealey and other leading brands ofinverter fitted with Dinse connectors.Model No: INV/16 Arc Welding Accessory Kit 16mm²Contents: Electrode Holder & 3mtr x 16mm² Cable,Earth Clamp & 2mtr x 16mm² Cable, Chipping Hammer/Brush, HandshieldApplications: MW140PLUS, MW160PLUS, MW170,TIG130HF

Model No: INV/25 Arc Welding Accessory Kit 25mm²Contents: Electrode Holder & 3mtr x 25mm² Cable,Earth Clamp & 2mtr x 25mm² Cable, Chipping Hammer/Brush, HandshieldApplications: TIG175HF, PULSEMIG225


E

TIG Welding Gauntlets - Pair

BSEN388, BSEN407 - Quality goat skin TIG weldingleather gauntlets with 160mm split cow leather cuf f.330mm Length.

GModel No. SSP142

Please note: Inverters need a clean power supply andand may not be suitable for use with some types ofportable generator . Please check with our technicaldepartment for further information.

C

A B

Professional Welder’s LinedLeather Gauntlets - Pair

BSEN420, BSEN388, BSEN407 - Gauntlets of fersuperior protection from spatter, heat and radiation.Comfortable, durable and preferred by the professionalwelder.

FModel No. SSP141

F

G

B

Control Pedal

Permits hands-free feathering of power output in use.Supplied with 10mtr cable. Applications: TIG130HF, TIG175HF, PULSEMIG225

CModel No. INV/TIG/5

Current Controller

Controls power output and one other selectableparameter. Supplied with 10mtr cable. Applications: TIG130HF, TIG175HF, PULSEMIG225

DModel No. INV/TIG/7

Section 10 TIG Inverters460

Plasma Inverter 25Amp withIntegral Compressor

Weighing only 12.5kg but with the power to cut up to6mm steel, this machine features an integralcompressor. No more trailing hoses or bottled air , justplug into a power supply and pull the trigger . Ideal formobile repairers and fabricators. Inverter features four-LED information panel including torch under-voltage,torch in cooling cycle, general thermostatic/power faultand power on. Supplied with plasma torch and earthcable. Utilises contact start torch making it suitable foruse near electrical equipment. Ideal for cutting steel,stainless, galvanized steel, aluminium, copper andbrass. Supplied with torch and earth cable.

AModel No. PP25PLUS

A

Simply plug in to mains -

switch machine on -

pull the trigger to cut.

B C

Model No: PP25PLUS PP25 PP35Power Output: 5-23A 5-25A 7-40ADuty Cycle*: 25% @ 20A 20% @ 25A 30% @ 35AMaximum Cutting Thickness: 6mm 8mm 12mmAir Requirements: Integral Compressor 100ltr/min 100ltr/minAir Pressure: n/a 55-70psi 58-72psiAbsorbed Power: 2.8kW 2.8kW 4kWSupply: 230V - 1ph 230V - 1ph 230V - 1phInsulation Class: H H HProtection: IP23 IP23 IP23Weight: 12.5kg 6.2kg 7.7kgAccessories Included: Yes Yes YesReplacement Consumables:Electrode (Pack Qty): 120/802420 (5) 120/802420 (5) 120/802420 (5)Electrode, Long (Pack Qty): - 120/802428 (5) 120/802428 (5)Nozzle (Pack Qty): 120/802092 (5) 120/802423 (5) 120/802423 (5)Nozzle, Long (Pack Qty): - 120/802429 (5) 120/802429 (5)Diffuser (Pack Qty): 120/802422 (5) 120/802422 (5) 120/802422 (5)Safety Cap (Pack Qty): 120.802096 (2) 120/802425 (2) 120/802425 (2)* With Optional High Power Nozzles/Electrodes

All standard plasma inverters(excluding PP25PLUS) are fittedwith an integral filter/regulator.

All plasma cutters includestandard plasma torch andearth cable.

A B C

Electrodes & NozzlesModel No. SEE BELOW

IntegralCompressor

120.802096 Safety Cap (2pc)

120/802425Safety Cap (2pc)

120/802429Long Nozzle (5pc)

120/802422 Diffuser (5pc)

120/802092Nozzle (5pc)

120/802423 Nozzle (5pc)

120/802420Electrodes (5pc)

120/802428 Long Electrodes (5pc)

Plasma Inverter 25Amp

Inverter power supply fitted with plasma cutter controlcircuitry. Inverter features three-LED information panel including torch under-voltage, general fault(thermostat, over/under-voltage, over current) andpower on. Supplied with plasma torch and earth cable.Utilises contact start torch making it suitable for usenear electrical equipment. Ideal for cutting steel,stainless, galvanized steel, aluminium, copper andbrass. Includes integral air filter and regulator unit withpressure gauge.

BModel No. PP25

Plasma Inverter 40Amp

Inverter power supply fitted with plasma cutter controlcircuitry. Inverter features four-LED information panelincluding torch under-voltage, air fault, general fault(thermostat, over/under voltage, over current) andpower on. Supplied with plasma torch and earth cable.Uses air to strike arc making it suitable for use nearelectrical equipment. Ideal for cutting steel, stainless,galvanized steel, aluminium, copper and brass.Includes integral air filter and regulator unit with panel-mounted pressure gauge.

CModel No. PP35

Section 10 Plasma Inverters 461

Plasma Cutter 12mm Capacity

Cut without gas! Plasma cutter produces a powerfulcutting flame using only compressed air and electricity.Features pilot ignition for quick, clean commencementof cut. Will cut up to 12mm but requires a 415V olt 3-phase supply.

Supply: 230/415V - 3phAbsorbed Power: 12.4kWAbsorbed Current: 31/18ACutting Current Position 1: 100% @ 30ACutting Current Position 2: 35% @ 50AMaximum Cutting Depth (on “C” class steel)*: 12mmAir Pressure: 90psiAir Capacity: 120ltr/minWeight: 60kg*With High Power Nozzles/Electrodes

AModel No. PL120/1

A

Oxyacetylene Welding Torch Set

Welding torch supplied with mixer nozzle, No. 2, No. 5 and No. 10 welding nozzles.

EModel No. SGA2

E

Oxygen & AcetyleneRegulators

Twin gauge regulator to ISO 2503:1998 with bull noseadaptor and 3/8”BSP hose union. Displays bottlepressure and working pressure for oxygen oracetylene.

Model No: Type:SGA3 OxygenSGA4 Acetylene

Model No. SEE BELOW

C

D

Gas Welding Hose

4.5mtr Twin hose fitted with check valves and 3/8”BSPswivel unions.

GModel No. SGA5

G

Flashback Arrestors

Protects operators, regulators and gas supply from theconsequences of severe forms of flashback. Conformsto BS6158 and EN730 and tested to German BAMstandards.

Model No: Gas Type: Resetting Type:SGA3/RFA Oxygen AutoSGA3/MFA Oxygen ManualSGA4/RFA Acetylene AutoSGA4/MFA Acetylene Manual

Model No. SEE BELOW

H I J K

H K-

C D-

Note: On premises covered by the Health and Safetyat W ork Act the use of hose check valves and flashback arrestors is required. Order your flashbackarrestors, see right, with your SGA1 set for full compliance.

WELDING PROTECTION

Please see pages 708 &709 for our full range ofWelding Helmets andGoggles.

B

Oxyacetylene GasWelding/Cutting Set

A complete set of regulators and torches for oxyacetylenegas welding. Single stage gas regulators with two gaugesto show bottle pressure and working pressure. 4.5mtrTwin gas hose set with hose check valves (to torch) andEN730-compliant pressure activated flash arrestors (toregulators). Welding torch with three lightweight nozzles.Cutting torch attachment with three ANMS cuttingnozzles. Spark lighter. Supplied in carry-case.

BModel No. SGA1

4.5mtr

J

HI

K

Oxyacetylene Welding/CuttingTorch Set

Comprises cutting torch, welding torch, mixer nozzle,No’s. 2, 5 and 10 lightweight welding nozzles, 1/16”,3/64” and 1/32” ANMS cutting nozzles.

Lightweight Welding NozzlesModel No: Size:SGA1/LW02 No. 2SGA1/LW05 No. 5SGA1/LW10 No. 10Cutting NozzlesModel No: Size:ANMS-1/16 1/16”ANMS-1/32 1/32”ANMS-3/64 3/64”

FModel No. SGA6

CD

F

Section 10 Plasma & Oxyacetylene462

Section 10 Bottle Racks & Trolleys 463

Professional Welding BottleTrolley with Storage Box

Designed to accept large oxyacetylene cylinders as distributed by the gas companies. Includescompartment for safe storage of welding and cuttingaccessories. Accepts cylinders of up to Ø280mm.

AModel No. ST28

A

Welding Bottle Trolley

Lightweight tubular steel frame with large diameterwheels for easy transport of large cylinders. Acceptscylinders of up to Ø300mm.

BModel No. ST28/B

B

Welding Bottle Trolley withPneumatic Tyres

Lightweight tubular steel frame. Extra large diameterwheels, fitted with pneumatic tyres for use over unevensurfaces and rough terrain. Accepts cylinders of up toØ300mm.

CModel No. ST28P

C

Welding Bottle Trolley

Lightweight steel frame with two-position adjustablehandle. Accepts gas welding/cutting set and two bottles - Ø140mm x 940mm and Ø172mm x 570mm.Also has torch stowage feature. Enables welding/cuttingequipment to be moved easily and conveniently . Suitable for Sealey Gas W elding/Cutting Set Model No. SGA1.

DModel No. ST32

Welding Bottle Wall Bracket 2 Bottle

Wall-mounting welding bottle rack for holding up to 2 bottles safely and securely. Bottles held in place bytough galvanized chain.

FModel No. WBB2

F

Welding Bottle Wall Bracket 3 Bottle

Wall-mounting welding bottle rack for holding up to 3 bottles safely and securely. Bottles held in place bytough galvanized chain.

GModel No. WBB3

Welding Bottle Trolley - Single

Lightweight tubular steel frame with large diameterwheels for easy transport of heavy cylinders.Accepts cylinders of up to Ø280mm.

D

G

EModel No. ST28S

E

B

Section 10 Spot Welders464

PULSEMODE

Spot Welder with Timer

Semi-automatic spot welder . Composite casing andhandle reduce heat transfer for operator comfort. Die-cast aluminium head and chassis reduces overallweight for improved handling. Integral synchronoustimer enables adjustable spot time of between 0.1 and1.2 seconds. Fully adjustable jaw pressure from 40kg to120kg enables close control of weld quality . Suppliedwith 120mm welding arms, electrodes and side handle.Capacity: 1 + 1mmAbsorbed Power: 6kWMains Fuse: 16AMaximum Welding Current: 3800ADuty Cycle: 1.5%Insulation Class: BWeight: 10.5kg

AModel No. SR122

A

Spot Welder with Digital Timer

Semi-automatic spot welder. Integral electronic controlallows operator to select thickness of material whileautomatically calculating the optimum weld duration.Also features pulse mode for use on high stress steelscommonly found in modern vehicle construction. Allautomatically selected parameters may be overriddenby the operator if required. Composite casing andhandle reduce heat transfer for operator comfort. Die-cast aluminium head and chassis reduces overallweight for improved handling. Fully adjustable jawpressure from 40kg to 120kg enables close control ofweld quality . Supplied with 120mm welding arms,electrodes and side handle.Capacity: 2 + 2mmAbsorbed Power: 13kWMains Fuse: 25AMaximum Welding Current: 6300ADuty Cycle: 1.5%Insulation Class: BWeight: 11kg

BModel No. SR123

Electronic Power Control

ElectronicTimer

120/803152

120/803151

120/803154

120/803159

120/803158

120/803153

120/803156

120/803155

120/690047

250mm120mm

120/690050

120/690049

120/690047

120/690050

120/690046 120/690048

120/690050

120/690051

120/690052

350mm

500mm

350mm

120mm

130mm

120mm

120/690050

120/690046

120/690052

Set:

Set: Set: 120/803150Set:

Set:

Set: Set:

Set: Set:

120/690049

Spot Welder Arms

A comprehensive range of heavy-duty spot weldingarms suitable for Sealey and other leading brands ofwelder. Sets include electrodes and cotter pins. W erecommend the use of an electrode sharpener to retainthe optimum tip configuration and performance.Arm Application: SR122, SR123, E/SPOT7001,E/SPOT8000, E/SPOT9500

CModel No. SEE ILLUSTRATION

Spot Welding ElectrodeSharpener

Ratchet action electrode sharpener , keeps tips tooptimum profile for maximum weld penetration.Recommended for all portable spot welders.

DModel No. ES/3553

D

B

C

Stud Welding Kit

A welder of exceptional quality for fast, ef ficient bodyrepairs. Removes dents quickly , without holes or theneed to remove interior trim. Amazing pulling power -even on heavier gauge panels. W elds on screws,washers and nails.Contents: Welding Gun with Stud GrippingSlide Hammer, Nozzles suitable for welding a widerange of studs and nails, Starter Kit of consumables.Power Supply: 230V - 1phFuse: 16APower at 50%: 0.8kWMaximum Welding Power: 6kWMaximum Short Circuit Current: 2500AWeight: 4.9kg

EModel No. SR20

E

Section 10 Spot Welders 465

A

STUD/SCREW/WASHER PULLING KITModel No. 120.802102

Includes: Slide Hammer, Stud Gripper, Electrodes and popular selection of fittings

B

INCLUDES:· PNEUMATIC PINCERS · TROLLEY· POWER CONTROLS · REGULATOR

INCLUDES:· PNEUMATIC PINCERS· POWER CONTROLS · TROLLEY

FullyWater-Cooled

~~~

Model No: E/SPOT9500 E/SPOT8000Max. Spot Welding Current: 7000A 4500AMax. Capacity: 3.0 + 3.0mm 1.5 + 1.5mmAbsorbed Power: 58.0kW 39.0kWRated Power 50%: 13.0kW 6.7kWNo Load Voltage: 8.6V 8.6VSupply*: 400V - 3ph 400V - 3phWater Cooler: Included -Trolley: Included IncludedAccessory Options:Stud Welder Kit: 120.802102 120.802102Manual ‘C’ Pincers: 120/801041 120/801041Double Spot Gun: 120/801042 -Manual Clamp: 120/801043 120/801043

Air-CooledDouble Spot Gun

Model No. 120/801042Manual C-Pincers

Model No. 120/801041Manual Pincers

Model No. 120/801043

BA

PULSEMODE

PULSEMODE

For a complete range of Spot Welding Arms for ModelNo. E/SPOT8000 see opposite page.

PULSE WELDINGPulse welding is used for welding surfaces with tracesof varnish or oxides and is also suitable for galvanizedand high stress steel. The pulse effect combined withhigh current produces mechanical stresses and microsparks which scour the surface of the welded area ensuring a complete and fully developed spot weld.

C350mm

120.803163 120.803164 120.803165

250mm 500mm

Set: Set: Set:

Spot Welding ArmsWater-Cooled

Suitable for E/SPOT9500. Arms carry waterways,through which passes chilled water reducing the rate ofheating and increasing duty cycle.

CModel No. SEE ABOVE

7000 Amps 4500 Amps

Digital Spot Welders

Microprocessor controlled power unit with push-button control automatically recognises which welding accessoriesare fitted and adapts power and duration characteristics for optimum results. Includes operator override. Featurespulse facility for welding high stress materials. Check-panel indicates machine status including: supply, thermostat,supply over/under voltage. E/SPOT9500 fitted with piggy-back water-cooler, cools both power cables and arms formaximum duty-cycle. Both models supplied with pneumatic pincers, set of arms and trolley.

Model No. SEE RIGHT

A B-

2 3 4

1

1234

* Two phases of 3-phase supply required.

5

7

6

3 4

Aluminium Spot Welding Set with Body Repair Kit

A comprehensive repair solution for non-oxidised or non-treated aluminium sections and panels in one package.Capacitor discharge welding unit attaches studs, rivets, washers and nails to the aluminium surface, deliveringpower in a single strike. This energy release is so fast and effective that it will not damage surrounding areas -even if they are painted. Also suitable for stud welding steel, stainless, galvanized and brass. The kit alsoincludes a pulling rig and hooks used to apply tension to the repair area while working the surrounding metal.Optional slide hammer and stud kit also available. Turn aluminium repairs into additional workshop revenue. Alsosuitable for aluminium sign making and repair.Maximum Energy Release: 1500JSpot Period: 1-3msDuty Cycle: 20 studs/minAbsorbed Power: 0.9kWNo Load Voltage: 12VSupply: 230V - 1phStud Welding Kit (Optional): 120.802108

AModel No. ALUSPOT1500

A

Aluminium Stud Welding Kit

Includes slide hammer, stud grippers, electrodes and apopular selection of fixings. Suitable for use withALUSPOT1500.

BModel No. 120.802108

B

Spot & Stud WeldingConsumables

Model No. SEE BELOW

C

Model No: Description: Pack Qty:PS/0002 Stud Welding Nail 2.5 x 50mm 100PS/0003 Stud Welding Nail 2.0 x 50mm 100PS/0004 Stud Welding Washer 8 x 15 x 1.5mm 100PS/0005 Stud Welding Rivet 5 x 10mm 100PS/0006 Stud Welding Rivet 3 x 3.2mm 100PS/0007 Stud Welding Rivet 3 x 4.5mm 100PS/0008 Stud Welding Threaded Rivet 5 x 18mm 100PS/0009 Stud Welding Threaded Rivet 4 x 15mm 100PS/0010 Self-Thread Rivet 5 x 25mm 100PS/0011 Self-Thread Rivet 5 x 18mm 100PS/0012 Self-Thread Rivet 5 x 12mm 100PS/0023 Tri-Hook Washer 100PS/0020 Carbon Heating Rod 5

1123334455567

1 2

Stud & Spot Welding System

Microprocessor controlled, single phase, stud and spotwelder machine with automatic torch recognition.Suitable for the professional body shop. Push-buttoncontrol of welding functions and setting of the materialthickness selects a pre-programmed welding time forconsistent weld quality . Ideal for all types of single-sided steel body repair techniques including the use ofstuds, nails, washers and wavy-wires. Supplied withwelding-gun-mounted slide-hammer for fast dentremoval. Set also includes carbon rod for heating andre-tempering spot repairs. May also be used for double-sided spot welding with optional guns - see page 465.

DModel No. E/SPOT7001

Maximum Spot Welding Current: 3000AMaximum Capacity: 1.5 + 1.5mmMaximum Absorbed Power: 11kWRated Power 50%: 3kWNo Load Voltage: 5.4VSupply: 400V - 1phWater Cooler: -Stud Welder Kit (Included): 120.802102Accessory Options:Trolley: 120.803002Manual ‘C’ Pincers: 120/801041Manual Pincers: 120/801043

Trolley for E/SPOT7001

Heavy-duty workshop trolley for E/SPOT7001 stud andspot welding machine. Features storage for slidehammer and welding gun plus a shelf for weldingaccessories.E/SPOT7001 not included.

EModel No. 120.803002

E

Stud Welding Kit 120.802102

supplied as standard with E/SPOT7001

D

Section 10 Spot Welders466

Section 11Body Shop468 Spray Guns471 HVLP Spray Guns473 Air Accessory Kits & Spray Gun Accessories474 Air Brush Kits475 Spray Gun Cleaning & Flammables Storage476 Panel Stands & Bumper Rack477 Windscreen Stand, Mats & Plunger Cans478 Panel Dryers480 Panel Preparation Tools481 Masking Products482 Coating & Wax Injector Guns483 Caulking & Sealant Guns484 Body Repair Kits486 Pulling Accessories & Trammel Gauges487 Chassis Straighteners488 Pulling Accessories489 Vehicle Trolleys & Skates490 Panel Tools494 Hand Riveters497 Dust-Free Tools & Vacuum Systems

Workshop Series Suction FeedRefinishing Gun

Ideal for applying base coats. Features adjustablepaint flow and fan width controls. Supplied withaluminium cam action suction feed pot. Suitable foruse with water based paints. Alternative set-upsavailable separately.Standard Set-Up: 1.5mmAvailable Set-Ups: 1.2, 1.8, 2.0, 2.2, 2.5mmAir Pressure: 50psiAir Consumption: 5-11cfmPot Capacity: 1000ml

AModel No. SSG401

A A B

Workshop Series Gravity FeedRefinishing Gun

Ideal for applying base coats. Features adjustablepaint flow and fan width controls. Supplied withcomposite gravity feed pot. Suitable for use with waterbased paints. Alternative set-ups available separately.Standard Set-Up: 1.8mmAvailable Set-Ups: 1.2, 1.5mmAir Pressure: 50psiAir Consumption: 5-11cfmPot Capacity: 400ml

BModel No. SSG501

C D E

Professional Suction FeedRefinishing Gun

Suitable for a variety of general purpose applications.Superbly balanced spray gun suitable for applyingfinishing coats. Supplied with cam action suction potand fitted with air regulator control. Suitable for usewith water based paints. Alternative set-ups availableseparately.

Standard Set-Up: 1.8mmAvailable Set-Up: 2.0mmAir Pressure: 30-70psiAir Consumption: 7-12cfmPot Capacity: 900ml

CModel No. SSG1

Gold Series Suction FeedRefinishing Gun

Spray gun with striking gold finish handle suitable forapplying finishing coats. Supplied with cam actionsuction pot. Superbly balanced gun. Suitable for usewith water based paints. Alternative set-ups availableseparately.

Standard Set-Up: 1.8mmAvailable Set-Ups: 1.5, 2.0mmAir Pressure: 30-70psiAir Consumption: 7-12cfmPot Capacity: 900ml

DModel No. S701

General Purpose Suction FeedRefinishing Gun

Ideal for applying base coats. Features adjustablepaint flow and fan width controls. Supplied withaluminium screw type suction feed pot. Suitable foruse with water based paints. Alternative set-upsavailable separately.

Standard Set-Up: 1.5mmAvailable Set-Ups: 1.2, 1.8, 2.0, 2.2, 2.5mmAir Pressure: 50psiAir Consumption: 5-11cfmPot Capacity: 800ml

EModel No. SSG2

B

Water Based PaintsThe use of water based paints isnow the accepted norm in theprofessional body shop. All Sealeyspray guns, HVLP and standardpressure are suit able for usewith water based paints. Thisincorporates the use of qualitymaterials such as stain less steeland brass where appropriate.

Section 11 Spray Guns468

A B

Low Pressure Spray Gun

Constant bleed type spray gun suitable for use withdiaphragm type air compressor. Supplied with quickrelease coupling.Standard Set-Up: 1.2mmAir Pressure: 12-40psiAir Consumption: 1.2-2.5cfmPot Capacity: 500ml

EModel No. SSG701

E

DC

Touch-Up Spray Gun VariableFan

Ideal for blowing in small areas of panel where finecontrol of paint and air is necessary . Featuresadjustable paint flow and fan width controls. Suppliedwith aluminium cam type suction feed pot. Suitable foruse with water based paints.

Standard Set-Up: 1.6mmAir Pressure: 50psiAir Consumption: 4.2-7cfmPot Capacity: 240ml

GModel No. SG6T

G

Touch-Up Spray Gun VariableFan

Ideal for blowing in small areas of panel where finecontrol of paint and air is necessary . Featuresadjustable paint flow and fan width controls. Suppliedwith aluminium gravity feed pot and comfortablecomposite gun handle. Suitable for use with waterbased paints. Alternative set-up available separately.

Standard Set-Up: 0.8mmAvailable Set-Up: 0.5mmAir Pressure: 50psiAir Consumption: 5-7cfmPot Capacity: 100ml

FModel No. SG6VC

F

General Purpose Gravity FeedRefinishing Gun

Ideal for applying base coats. Features adjustablepaint flow and fan width controls. Supplied with spunaluminium gravity feed pot and comfortable compositegun handle. Suitable for use with water based paints.Alternative set-ups available separately.Standard Set-Up: 1.4mmAvailable Set-Ups: 1.2, 1.6, 1.8, 2.0, 2.2, 2.5, 3.0mmAir Pressure: 50psiAir Consumption: 4.5-9.0cfmPot Capacity: 700ml

AModel No. SG4

Gold Series Gravity FeedRefinishing Spray Gun

Suitable for applying finishing coats. 2-Stage triggercontrol and 500ml plastic gravity feed pot. Adjustablespray width and fluid flow. Maintenance tools supplied.Suitable for use with water based paints. Alternativeset-ups available separately.Standard Set-Up: 1.4mmAvailable Set-Ups: 1.7, 2.0mmAir Pressure: 30-50psiAir Consumption: 6-11cfmPot Capacity: 500ml

DModel No. S701G

General Purpose Gravity FeedRefinishing Gun

Superbly balanced spray gun ideal for applying basecoats. Features adjustable paint flow, fan width and airregulator controls. Supplied with composite gravityfeed pot. Suitable for use with water based paints.Alternative set-ups available separately.Standard Set-Up: 2.0mmAvailable Set-Ups: 1.2, 1.4, 1.8mmAir Pressure: 50psiAir Consumption: 7-14cfmPot Capacity: 500ml

BModel No. SSG5

Professional Gravity FeedRefinishing Gun

Superbly balanced spray gun suitable for applyingfinishing coats. Supplied with plastic gravity feed potand lid. Fitted with air regulator control. Suitable for usewith water based paints. Alternative set-ups availableseparately.Standard Set-Up: 1.4mmAvailable Set-Ups: 1.7, 2.0mmAir Pressure: 40-50psiAir Consumption: 6-12cfmPot Capacity: 500ml

CModel No. SSG1/G

Section 11 Gravity Feed & Touch-Up Spray Guns 469

A B

Pressure Pot Components

Pressure pot components compatible with SSG1Ppressure feed spray gun kit.

Model No: Description:SSG1P/1 Spray Gun HeadSSG1P/2 Set of 2 x 1.37mtr HosesSSG1P/3 2ltr Pressure Pot


1

1

2

3

23

Z-Swivel AirConnector/Regulator

Suitable for all air tools with 1/4”BSP connection.Swivel assembly gives greater freedom of movementto tool when connected to air line. Fitted with air valvefor extra control over working pressure of power tool.

Air Inlet Size: 1/4”BSPAir Outlet Size: 1/4”BSPT

EModel No. SA900

Universal Swivel Adaptor withPressure Gauge

Suitable for all types of air tools with 1/4”BSPconnection and prevents hose from twisting.Particularly suited for use with reciprocating/vibratingtools. Mini gauge allows reading of pressure at tool.Enables maximum performance.

Air Inlet: 1/4”BSPAir Outlet: 1/4”BSPTMaximum Air Flow: 25cfm

FModel No. SA901

F

EC

Magnetic Spray Gun Holder 2 Gun & Hose

Heavy-duty magnetic bracket with two large magnetsthat will adhere to any ferrous surface. Compositecovering prevents scratching of surface. Suitable forstoring up to two spray guns.

Dimensions (W x H): 250 x 158mm

CModel No. MSH02

Spray Aid - Magnetic

Spray and dry odd-shaped trim and wing mirrorsquickly and easily. Fix trim to spray-aid and hand-holdto spray. Then, to dry, fix to spray-booth wall using thetwo strong magnets.

Dimensions (W x H): 160 x 285mm

DModel No. RE001

D

FILTER REGULATORCOMBINATIONS

See pages 539 to 541 for thecomprehensive range of FilterRegulators.

Pressure Feed Spray Gun Kit

Based on the SSG1 spray gun head and supplied with high capacity pressure pot with gauge. Suitable forbulk/production spraying. Suitable for use with water based paints. Components of this kit are also availableindividually. Alternative set-up available separately.Standard Set-Up: 1.8mmAvailable Set-Up: 2.0mmAir Pressure: 40-60psiAir Consumption: 7-12cfmPot Capacity: 2ltr

AModel No. SSG1P

Section 11 Pressure Feed Spray Guns & Accessories470

E F

Gravity Feed HVLP Touch-UpSpray Gun

Ideal for blowing-in small areas of panel where finecontrol of paint and air is necessary . Anodized spraygun body resists corrosion and makes for easiercleaning. Brass air cap with stainless steel needle andnozzle make this HVLP gun suitable for water basedpaint. Alternative set-up available separately.

Standard Set-Up: 0.8mmAvailable Set-Up: 1.0mmAir Pressure: 3bar/43psiAir Consumption: 9cfmPot Capacity: 100ml

AModel No. HVLP731

A

Gravity Feed HVLP Spray Gun

Round/flat fan control allows spray pattern to beadjusted for any job. Anodized spray gun body resistscorrosion and makes for easier cleaning. Brass air capwith stainless steel needle and nozzle make this HVLPgun suitable for water based paint. Alternative set-upsavailable separately.

Standard Set-Up: 1.4mmAvailable Set-Ups: 1.2, 1.3, 1.7, 2.0mmAir Pressure: 3bar/43psiAir Consumption: 15cfmPot Capacity: 600ml

BModel No. HVLP741

B C


Round/flat fan control allows spray pattern to beadjusted for any job. Anodized spray gun body resistscorrosion and makes for easier cleaning. Aluminiumair cap with stainless steel needle and nozzle makethis HVLP gun suitable for water based paint.Alternative set-ups available separately.

Standard Set-Up: 2.0mmAvailable Set-Ups: 1.4, 1.7mmAir Pressure: 3bar/43psiAir Consumption: 15cfmPot Capacity: 600ml

CModel No. HVLP742

Suction Feed HVLP Spray Gun

Round/flat fan control allows spray pattern to beadjusted for any job. Anodized spray gun body resistscorrosion and makes for easier cleaning. Brass air capwith stainless steel needle and nozzle make this HVLPgun suitable for water based paint. Alternative set-upsavailable separately.

Standard Set-Up: 1.7mmAvailable Set-Ups: 1.2, 1.3, 1.4, 2.0mmAir Pressure: 43psiAir Consumption: 16cfmPot Capacity: 800ml

DModel No. New HVLP740

D

Suction Feed HVLP Spray Gun

Fully polished metal gun body resists corrosion andhas low affinity for paint making this unit ideal for waterbased paints and easy to clean. Adjustable paint, fanwidth and air regulator controls. Alternative set-upsavailable separately.

Standard Set-Up: 1.7mmAvailable Set-Ups: 1.3, 1.4, 1.5, 2.0mmAir Pressure: 15-28psiAir Consumption: 2.8-7.9cfmPot Capacity: 900ml

EModel No. HVLP-750


Fully polished metal gun body resists corrosion and haslow affinity for paint making this unit ideal for water basedpaints and easy to clean. Adjustable paint, fan width andair regulator controls. Alternative set-ups availableseparately.

Standard Set-Up: 1.4mmAvailable Set-Ups: 1.3, 1.5, 1.7, 2.0mmAir Pressure: 15-28psiAir Consumption: 2.8-7.9cfmPot Capacity: 500ml

FModel No. HVLP-751

HVLP

HVLP HVLP HVLP

HVLP HVLP

Section 11 HVLP Spray Guns 471

Section 11 HVLP Spray Guns & Paint Can Crusher472

BA

1

4

3

IMPORTANT SAFETY WARNING!

Always wear respiratory protection when using these tools! For afull range of safety equipment, see pages 707 to 717 of this catalogue.

C

230V

2

HVLP Pressure Pot System with Gun & Hoses1.7mm Set-Up

Fully polished metal gun body resists corrosion and has low affinity for paint, makingthis unit ideal for water based paints and easy to clean. Adjustable paint, fan widthand air regulator controls. High capacity pressure pot holds up to two litres of paintper fill. This unit is perfectly suited to the commercial refinishing shop. Componentsfrom the HVLP-79/P are also available individually. Alternative set-ups availableseparately.Contents: Spray Gun Head, Paint Supply Hose, Pressure PotStandard Set-Up: 1.7mmAvailable Set-Ups: 1.3, 1.4, 1.5, 2.0mmAir Pressure: 15-50psiAir Consumption: 10cfmPot Capacity: 2.0ltr

AModel No. HVLP-79/P

HVLP Spray Gun Kit 400W

Utilizes 400Watt electric motor with high performance turbine to deliver continuousvolumes of air. Spray gun uses composite body, which has low af finity for paint,enabling quick and easy cleaning. Gun includes air and paint controls for fineadjustment of spray pattern. Suitable for interior and exterior use, applying waterand oil based paints, lacquers and stains. Supplied with air hose, viscosity cup andshoulder strap.Motor Power: 400WMaximum Air Pressure: 1.5psiSupply: 230VSpray Gun Set-Up: 2mmAir Hose Length: 2.7mtrWeight: 2.3kgPot Capacity: 900ml

CModel No. HVLP2000

Pneumatic Paint Can Crusher 2.2ton

Reduce your waste disposal costs* - crushing paint cans minimizes the volume ofyour hazardous waste. Air operated paint can press with safety lock-out devicewhich prevents the door being opened during operation. Bench mounting unit withoutlet for waste paint collection.* For disposal by volume customers.

Internal Size (W x D x H): 280 x 230 x 250mmExternal Size (W x D x H): 390 x 250 x 750mmAir Supply: 110-130psiAir Inlet: 1/4”BSPWeight: 41kg

DModel No. New HCC08

D

HVLP Pressure Pot Components

Individual components for use with HVLP-79/P pressure pot spray gun.Model No: Description:

HVLP-79/P1 Spray Gun HeadHVLP-79/P2 Set of 2 x 1.37mtr HosesHVLP-79/P3 2ltr Pressure PotHVLP-79-CT Cap Test Device


34

21

HVLP

HVLP

HVLP

Air Accessory Kit with Quick Couplings

Pack of compressed air tools and accessories suitable for all leading makes ofcompressor. Comprises quality suction feed spray gun with bayonet type pot lid,tyre inflator with gauge, paraf fin/detergent spray gun, air blow gun and coiled airhose. Components fitted with quick release air line couplings.

Kit Contains: Model No:Suction Feed Spray Gun: SA301Tyre Inflator with Gauge: SA302Paraffin Spray Gun: SA303Air Blow Gun: SA304Coiled Air Hose: SA305

Spray Gun Accessories

Model No: Description:SC138 Alloy Paint Pot with Cam Action Lid 1ltrBSGC/3 Spray Gun Cleaning Brush Set 3pcILF/RG On-Gun Pressure Regulator/Gauge

Maximum 160psi - Maximum 18cfm at 90psi

E J-

B

Professional Paraffin Spray Gun

Metal tank with large diameter fluid aperture which aidsfilling and cleaning of tank. Suitable for applyingdegreasing and cleaning agents. Fitted with fluid/aircontrol valve.

Air Inlet: 1/4”BSP

CModel No. SA923

C

Model No. SEE BELOW

Air Accessory Kit with 1/4”BSP Union Couplings

Pack of compressed air tools and accessories suitable for all leading makes ofcompressor. Includes high performance suction feed spray gun with compositebayonet type pot lid, tyre inflator with gauge, paraffin/detergent spray gun, air blowgun and coiled air hose. Components fitted with 1/4”BSP threaded unions.

Kit Contains: Model No:Suction Feed Spray Gun: SA331Tyre Inflator with Gauge: SA332Paraffin Spray Gun: SA333Air Blow Gun: SA334Coiled Air Hose: SA335

BModel No. SA33/S

A

AModel No. SA30

EFG

Model No: Description:ILF/GF10 In-Line Gravity Cup Filter (Pack of 10)ILF/SE In-Line Water Trap/Filter

Maximum 160psi - Maximum 18cfm at 90psiILF/PF10 In-Line Suction Pot Filter (Pack of 10)

I

J

1

5

2

3

4

5

2

1

4

3

12345

12345

D

Spray Gun Cleaning Set 20pc

Various sized brushes and probes suitable for manycleaning applications, particularly spray guns after use.

Contents: 115, 135 (Small), 200 (Medium), 200mm(Large) Bristle Brush. 2 x 150, 210mm Soft Brush,180mm Brush with 45mm Soft-fill, Wire Probe, 10 x Wooden Probe, Needle Lubricant

DModel No. New BSGC2

Section 11 Air Accessory Kits & Spray Gun Accessories 473

E F

G H

I J

H

B C

Air Brush Propellant

Can of air brush propellant suitable for Sealey AB9301,AB931, AB932 and AB933 air brushes. The AB932 &AB933 require the additional purchase of Adaptor CapModel No. AB930/11. Propellant also suitable for othermakes of air brush.

GModel No. AB/P

A

Air Brush Utility Kit 23pc

Air brush kit including AB932 professional gun andcomprehensive set of accessories including knife setand air brush holder. Supplied in carry-case. Ideal forthe serious air brush enthusiast, or professional artist.

Contents: AB932 Air Brush Kit, Modeller'sKnife Set 7pc, Air Brush Workstation Stand, Artist'sBrush, Paint Storage Jars (22cc x 4), Cleaning Fluid,Petroleum JellyWorking Pressure: 15-45psi

DModel No. AB932/K

D

Mini Air Brush Compressor

Quiet running piston pump, powered by a 1 10Wattelectric motor - suitable for most air brushes. Requiresno lubrication and the air supply from the unit is oil-free.Supplied with an air filter regulator and pressuregauge.

Motor Power: 110WSupply: 230V - 1AFree Air Delivery: 0.8cfmAir Pressure: 50psiAir Outlet Size: 1/4”BSP

FModel No. AB900

F

G

Professional Gravity Feed AirBrush Kit

Metal body construction with built-in gravity feed potand 0.25mm nozzle. Features a double-action triggerproviding precision control of paint flow, which allowsfor a professional finish. Supplied in storage case.

Working Pressure: 15-50psiNozzle Size: 0.25mmCup Capacity: 9cc

EModel No. New AB933

E

Professional Air Brush Kit

Metal body with suction bottle or thimble feed options. Paintdelivery controlled on single thumb screw. Supplied with0.35mm nozzle. Includes two 22cc glass pots, one 5ccmetal cup, 1.6mtr small bore hose, 1/4” reduction nipple,wrench and hanging bracket. Supplied in storage case.Working Pressure: 15-50psi

CModel No. AB932

COMPRESSORSFor our full range of compressors

please see pages 549 - 556.

Pistol Type Air Brush Kit

Gravity fed air brush with composite body. Suitable forblowing-in small areas of panel. Kit includes gravitycup, propellant adaptor*, 1.5mtr small bore hose, 1/4”reduction nipple. Supplied in composite case.

Working Pressure: 15-45psi*Propellant not included

BModel No. AB931

Air Brush Kit with Propellant

Composite body suction type air brush. Supplied with1.5mtr small bore hose, two 22cc suction pots,propellant cap and wrench. Kit also includes a can ofair brush propellant.

Working Pressure: 15-45psi

AModel No. AB9301

Section 11 Air Brush Kits474

A B


Sturdy metal construction with yellow powder coat andBS5378 warning sign. Single door, fitted with two-pointkey lock and supplied with two keys. Features anadjustable, lipped shelf and liquid-tight base to retainspills. Smaller compact design for limited space.Illustrated with optional floor stand, Model No.FSC01ST.Shelves: 1Size (W x D x H): 460 x 460 x 760mm

DModel No. FSC01

D

E



EModel No. FSC01ST

Air Operated Spray Gun Cleaners

Fully automatic operation - close lid to start and open lid to stop. Suitable for premises covered by the HSE anddoes not require expensive fume extraction system. Single gun tank suitable for the smaller body shop operationand uses less solvent than the two gun unit, saving on gun wash and cleaning time.

Model No: SM24/1 SM23/2Gun Capacity: 1 2Width: 430mm 572mmDepth: 450mm 470mmHeight: 1300mm 1300mmPump: Pneumatic PneumaticAir Pressure: 20-50psi 20-50psiAir Consumption: 2-4cfm 2-4cfm

Model No. SEE BELOW

A B

A B - Air Operated Water BasedSpray Gun Cleaning Tank 2 Gun

Fully enclosed, corrosion resistant tank suitable forcontaining water and detergent necessary for cleaningwater based spray guns. Powerful and reliablediaphragm pump system washes up to two gunssimultaneously. Semi-automatic operation.

Gun/Pot Capacity: 2/2Solvent Capacity: 19ltrDimensions (W x D x H): 650 x 470 x 1000mmPump: Pneumatic DiaphragmAir Pressure: 40-60psiAir Consumption: 2-4cfm

CModel No. New SM233

C

G


Sturdy metal construction with yellow powder coat andBS5378 warning signs. Two door, fitted with two-point keylock and supplied with two keys. Features two adjustable,lipped shelves and liquid-tight base to retain spills. Illustratedwith optional floor stand, Model No. FSC02ST.Shelves: 2Size (W x D x H): 915 x 460 x 915mm

FModel No. FSC02

F



GModel No. FSC02ST


Sturdy metal construction with yellow powder coat andBS5378 warning signs. Two door, fitted with two-pointkey lock and supplied with two keys. Features threeadjustable, lipped shelves and liquid-tight base toretain spills. 155mm Raised, leak-proof, door sill.Shelves: 3Size (W x D x H): 915 x 460 x 1830mm

HModel No. FSC03

H

Section 11 Spray Gun Cleaning & Flammables Storage 475

D

C

Folding Panel Stand

Versatile stand suitable for a wide variety of body shopapplications. W ork height is fully adjustable bylengthening chains. Foam cushioned supports helpprevent marking of panel. Folds away when not in use.

Width: 1040mmFolded Height: 1100mm

DModel No. MK50

Panel Stand - Door & Bonnet

Features fully adjustable arms to fit many styles of bonnets, wings, doors andbumpers. Main frame can adjust through 180°, to give required angle. Fitted withtwo fixed Ø180mm wheels and two braked Ø125mm castors for easymanoeuvrability.

Overall Arm Width: 935mmBase Dimensions (W x D): 1110 x 780mm

AModel No. MK51

A

A A

Bumper Rack Double Sided 4-Level

Double-sided rack for safe and tidy workshop storageof painted bumpers. Prevents inadvertent damage topaint finish during storage. Four pairs of heightadjustable support arms for maximum capacity andflexibility. Fitted with four castors, two with brake, formaximum manoeuvrability and safe positioning.Width: 1180mmHeight: 2140mmUpper Arm Length: 400mmLower Arm Length: 585mm

CModel No. RE55

Universal Panel Stand

Ideal for doors, bonnets, bumpers, wings and spoilers. Eight adjustable bars and360° rotation make this stand suitable for almost any panel types. Portable for easymanoeuvring of application from preparation to spray booth. Built-in tooltray/storage for easy and convenient selection.

Overall Arm Length: 1420mmShort Adjustable Bar (x 4): 410mmLong Adjustable Bar (x 4): 760mmHeight (Stand): 1070mmMaximum Capacity: 90kg

BModel No. New MK52

B

Folding Bumper Stand

Ideal for storage of bumpers prior to preparation andspraying. Adjustable stand width with extendable armsmakes this unit suitable for holding various types andstyles of bumpers. Folds away for easy storage whilstnot in use.

Maximum Width:Arms Closed: 890mmArms Fully Extended: 2000mm

EModel No. New MK54

E

E E

E E

Section 11 Panel Stands & Bumper Rack476

Plunger Cans

Easy one-handed operation, these plunger cans areconvenient and safe for dispensing flammable solvents.Spring mounted dasher delivers measured amount ofliquid to swab/cloth. Perforated metal flash arrestorprotects against ignition and escape of flammable vapours.Model No: Capacity:

PC1 1.0ltrPC19 1.9ltrPC38 3.8ltr


Bonnet Protection Mat

Quilted design with edge trim for extended life.Complete bonnet protection when removing andinstalling windscreens. Elastic and padded straps foreasy fitting. Universal size, suitable for most vehicles.Fully washable.

Size (W x H): 1490 x 1120mm

BModel No. WK200

B

Dashboard Protection Mat

Complete dashboard and steering wheel protectionwhen removing and installing windscreens.Additionally covers air vents. Non-slip lining ensuresmat remains in position. Suitable for the majority ofright-hand drive vehicles. Fully washable.

Size: 1280 x 590/1090mm

CModel No. WK201

CA

Air Bag Cabinet

Mandatory safe storage for air bag and seat-belt pre-tensioner charges. Our cabinet is made from 2mmthick sheet steel and is fitted with a quality slam typelock. Keeps charges safe from theft or tampering. Wallmounting.

Size (W x D x H): 460 x 310 x 615mm

EModel No. AP95

E

Folding Windscreen Stand

Lightweight tubular steel design with variable heightfacility. Large rubber suckers prevent screen frommoving during preparation. Folding frame makes thisideal for both workshop and mobile screen preparation.

Width: 1060mmFolded Height: 1165mm

AModel No. WK4

Mobile Parts Storage Cage

Ideal for short-term storage during car repair or bodyshop preparation. Keeps parts, panels andcomponents neatly and securely stored for clutter-freeworkshop and easy location during vehicle re-assembly.Supplied with two hanging hooks for suspendingvarious panels/components within cage.

Size (W x D x H): 800 x 800 x 1880mm

DModel No. New MK53

D D F1

2

3

Section 11 Windscreen Stand, Mats & Plunger Cans 477

1

32

Spot Repair Paint & Panel DryerRegulated

Trigger operated air gun with fine multi-jet outlet forcontrolled airflow. Ideal for rapid air-drying of smallareas of water based paint.Air Inlet: 1/4”BSP

B

Double Stand for Air OperatedPanel Dryers

Stand will support one or two SDA01 or SDA03 AirPanel Dryers allowing operator more time for othertasks. Fully adjustable for height and dryer angle.Supplied with coiled air hoses and fittings.

Maximum Height: 2300mmMinimum Height: Ground

CModel No. SDAST

C

DModel No. SDA02

D

Air Operated Panel Dryer withAdjustable Air Flow

Designed for drying water based paints. Panel dryeroperates on workshop air supply . Filter preventsairborne particles contaminating paint surface.Adjustable air flow to regulate as required. Ideal forlocalised or spot repair. May be hand-held or mountedon optional Double Support Stand - Model No. SDAST.Air Inlet: 1/4”BSPMaximum Working Pressure: 90psiAir Consumption: 10cfm @ 15psi, 18cfm @ 90psi

BModel No. SDA01

B

A

E

Air Operated Panel Dryer withAdjustable Air Flow

Designed for drying water based paints. Lightweight,composite panel dryer operates on workshop airsupply. Filter prevents airborne particles contaminatingpaint surface. Adjustable air flow to regulate asrequired. Ideal for localised or spot repair . May behand-held or mounted on optional Double SupportStand - Model No. SDAST (requires 2 x SA1/1414 - 1/4”BSPT Male to Male Adaptor).Air Inlet: 1/4”BSPMaximum Working Pressure: 90psiAir Consumption: 7cfm @ 40psi, 15cfm @ 90psi

AModel No. New SDA03


Round/flat fan control allows spray pattern to beadjusted for any job. Anodized spray gun body resistscorrosion and makes for easier cleaning. Brass air capwith stainless steel needle and nozzle make this HVLPgun suitable for water based paint. Alternative set-upsavailable separately. See page 471 for full specification.

EModel No. HVLP741

F


Fully polished metal gun body resists corrosion andhas low affinity for paint, making this unit ideal for waterbased paints and easy to clean. Adjustable paint, fanwidth and air regulator controls. Alternative set-upsavailable separately. See page 471 for full specification.

FModel No. HVLP-751

For full range of spray guns, see pages 468 to 472. C+

C

HVLP HVLP

Water Based PaintsThe use of water based paintsis now the accepted norm inthe professional body shop. AllSealey spray guns, HVLP andstandard pressure are suit ablefor use with water basedpaints. This incorporates theuse of quality materials such asstainless steel and brass whereappropriate.

Section 11 Panel Dryers478

A

E

SHORTWAVE

3000W

SHORTWAVE1000W

Infrared Thermometer withLaser Sight

Detects energy emission in the infrared spectrum andconverts reading into a display of temperature.Features laser pointer to indicate area being sampled.Temperature is displayed on large LCD panel withback-lit display for use in low light areas. Temperaturecan be shown in either °C or °F. Powered by 9Volt cell(not included). Supplied with belt pouch.

Focal Ratio: 8:1Temperature Range: -50 to +280°C, -58 to +536°F

CModel No. VS900

C

LaserSight

Infrared Panel Dryer Hand-HeldShort Wave 1000W

Designed and developed to assist with any number ofsmall drying processes. Ideal for spot repairs, enginedrying, adhesive stripe removal, drying filler , dryingprimer or just preheating prior to spraying. May be usedas a stand-alone system, when fitted to the slide and lockbracket on the separately available lightweight FloorStand Model No. IR1000ST, or as a source of instantdirect heat, when used hand-held. Fitted with a powerful1000Watt short wave infrared lamp - instant heat can bedirected wherever and whenever it may be required.Number of Elements: 1Element Power: 1000WReflector Size: 300 x 110mmPower Supply: 230V

AModel No. IR1000

Infrared Panel Dryer - Short Wave 3000W

Three 1000Watt high output short wave lamps in three individually switched cassettes. Lamps emit short waveinfrared heat ideal for optimizing drying of water based paints. This flexible system allows each cassette to beadjusted and locked in position around the contours of the vehicle, ensuring maximum area coverage. Heightadjustment is made using the locking gas strut, offering near weightless movement of the cassette support arm.

Number of Elements: 3Element Power: 3 x 1000WReflector Size: 490 x 140mmPower Supply: 230V

EModel No. IR3000

Floor Stand for IR1000

Sturdy 1870mm chrome plated stand. Combines allthe features of a flexible hand-held heater, with all thebenefits of a free-standing panel dryer . Full height‘slide and lock’ heater bracket. Ideal for use on smallrepairs and drying jobs, for example engine drying,stripe removal, filler drying, stone chip repairs andpreheating prior to spraying. Easy assembly anddesigned to suit Model No. IR1000 Hand-held InfraredPanel Dryer.Maximum Lamp Height: 2100mm

BModel No. IR1000ST

B

Illustrated with IR1000(not included).

Ø13mm

100mm200mm

400mm

Ø25mmØ50mmArea Measured

Distance

Focal Ratio: 8:1

Mounting Bracket for IR1000 touse with SDAST

Enables the Sealey Short Wave Infrared Panel Dryer(Model No: IR1000) to be used with the Air PanelDrying Stand/Air Dryers (Model No’ s: SDAST &SDA01 or SDA03). Used together drying time isaccelerated, increasing turnaround on repairs.

DModel No. New SDA04

D

SDA04 used in conjunction with SDAST , 2 x SDA01or SDA03 & IR1000.

Section 11 Panel Dryers 479

G

Body Filler Applicator Set 4pc

Spring steel blades with composite grips. Suitable forthe application of auto body filler.Blade Widths: 12, 25, 50, 75mm

GModel No. AK5224

Sanding Block 65 x 125mm

Accepts 100mm wide abrasive strips. Comfortablecontoured grip. Abrasive firmly retained by integral pins.

Size: 65 x 125mm

CModel No. SB67

C

1

Sanding Block 70 x 130mm

Accepts 100mm wide abrasive strips. Comfortablecontoured grip. Grip and base separate completely forvery simple and fast abrasive changes.

Size: 70 x 130mm

BModel No. SB66

B

D

A

2

3

4

56

H

Composite Scraper Set 4pc

Ideal for removing trim, badges and decals from bodywork. Also suitable for removing residue fromalloy wheels. Polypropylene edges will not scratch ormark paint or panel work and can be re-sharpenedwith a file when required.Length: 275mmBlade Sizes: 20, 23, 25, 38mm

HModel No. AK5251

Sanding Blocks

Comprehensive range of resilient sanding blocks forboth small and large work areas. All, except RE4010,have a hook-and-loop surface for attaching abrasive.

AModel No. SEE RIGHT

Model No: Type: Size:RE4001 Curved Hook & Loop Ø150mmRE4002 Two-Handed Hook & Loop 75 x 440mmRE4004 Square Hook & Loop 100 x 180mmRE4005 Square Hook & Loop 70 x 135mmRE4007 Round Hook & Loop Ø30mmRE4010 Teardrop 70 x 130mm

123456

Rigid Scrapers

Chrome plated, highly polished steel blade withcomposite handle and hanging holes.

Model No: Blade Width: Length:AK5220 40mm 195mmAK5221 50mm 195mmAK5222 75mm 195mmAK5223 100mm 195mm

Model No. SEE BELOW

F

F

1234

2

3

4

Sanding Block Extra Large 70 x 210mm

Accepts 100mm wide abrasive strips. Comfortablecontoured grip. Abrasive firmly retained by integral pins.

Size: 70 x 210mm

DModel No. SB68

SCRAPERSSee pages 343 & 344 forour comprehensive rangeof Scrapers.

1

Professional Adjustable HandFile Holder

Simple screw adjustment flexes file either concave orconvex to suit job at hand. Features a 2-position swivellock handle. Suitable for use in professional body shops.N.B. File not included - Order Model No: RE5001.9TPIor RE5001.12TPI.

Model No: RE5001Optional Files:Model No: TPI:RE5001.9TPI 9RE5001.12TPI 12

EModel No. New RE5001

E

Section 11 Panel Preparation Tools480

G

Masking Paper Dispenser Trolley1 x 300 & 2 x 450mm Rolls

Heavy-duty trolley with three-station masking paperdispenser. Includes weight-loaded cutter bar andmasking tape dispenser for each station.

Capacity: 1 x 300, 2 x 450mm Paper RollsNote: Papers and tapes not included with any dispenser/trolley.

DModel No. MK69

Masking Paper Dispenser1 x 450mm Roll

Single roll dispenser accepts rolls up to 450mm andcan be stood on the body shop floor or wall mounted.Automatically applies adhesive tape to edges ofmasking paper.

Capacity: 1 x 450mm Paper RollNote: Papers and tapes not included with anydispenser/trolley.

AModel No. MK65

A

Masking Paper Dispenser2 x 450mm Rolls

Two roll dispenser accepts rolls up to 450mm andfeatures storage tray underneath dispenser unit.Automatically applies adhesive tape to edges ofmasking paper.Capacity: 2 x 450mm Paper RollsNote: Papers and tapes not included with any dispenser/trolley.

BModel No. MK66

Masking Paper Dispenser2 x 900mm Rolls

Two roll dispenser accepts rolls up to 900mm andfeatures storage tray underneath dispenser unit.Automatically applies adhesive tape to edges ofmasking paper.Capacity: 2 x 900mm Paper RollsNote: Papers and tapes not included with any dispenser/trolley.

CModel No. MK67

C

A

D

B

Papers and tape not included.

Papers and tape not included.

Magnetic Edge Protector 2pc

Protects panel edges next to workpiece whilst sanding,grinding or painting. Magnetic and flexible for easyinstallation.Size (W x H): 153 x 88mm

FModel No. SEP2

Suction Clamp Set 6pc

A great body shop time saving tool set. Secures paneltrims, decals, badges, window trims, rain and lightsensors during preparation stages or while waiting for adhesives to set. Non-marking, compositeconstruction with adjustable reach and clamp.Contents: 6 x Suction ClampsClamp Length: 180mm

EModel No. RE006

FE

Door Jammer

Holds door ajar while working on or around door-skinsor door-struts. Prevents inadvertent damage toadjacent panels. Ideal for sanding, painting andpractically any work around door edge.Minimum/Maximum Length: 310/255mmApplications: Vehicle Doors & Boot Lids

GModel No. RE010

Section 11 Masking Products 481

Under-Body Coating/WaxInjector Kit

Unique disposable head and pick-up tube assemblymeans that you never need to clean your gun again -just throw away the head and tube every time. Savestime and mess. Supplied with wax injector probe.

Air Inlet: 1/4”BSPReplacement Head Kit: SG14D/ACCContents: 6 Disposable Heads & Tubes

DModel No. SG14D

Extension Probe 600mm

Rigid cavity probe suitable for use with SG19 W axInjector Gun.

FModel No. SG191

Professional Under-BodyCoating Gun - American Style

Fitted with regulator to obtain even deposit of coating.Accepts standard size canisters.Air Pressure: 90psiAir Consumption: 5cfmAir Inlet: 1/4”BSP

CModel No. AK42

C

Under-Body Coating Gun

Accepts most popular types of 1ltr coating tins.Air Pressure: 90psiAir Consumption: 8cfmAir Inlet: 1/4”BSP

BModel No. SG14

B

E

Wax Injector Kit

Designed for the application of proprietary brands ofwax rust inhibitor. Supplied with a selection of lances toenable the wax to be sprayed into body cavitiesthrough small access points.

Air Pressure: 70-80psiAir Consumption: 15cfmAir Inlet: 1/4”BSP

HModel No. SG18

H

F

Wax Injector Gun

Suitable for proprietary brands of wax rust inhibitor .Supplied with nozzle for surface application and910mm flexible probe for cavities.Air Pressure: 87-145psi(6-10bar)Air Consumption without Extension: 13.4cfmAir Consumption with Extension: 6.4cfmAir Inlet: 1/4”BSPOptional Rigid Probe: SG191

GModel No. SG19

G

Under-Body Coating Gun

Accepts most popular types of 1ltr coating tins.Air Pressure: 90psiAir Consumption: 10cfmAir Inlet: 1/4”BSP

AModel No. SG139

A

D

Deluxe Under-BodyCoating/Wax Injector Gun

Supplied with canister and wax injection probe.Air Pressure: 90psiAir Consumption: 8cfmAir Inlet: 1/4”BSP

EModel No. SG16

H

Section 11 Coating & Wax Injector Guns482

Caulking Guns

Model No: Length:AK39 330mm

Suitable for 310ml cartridges up to 220mm length.AK3901 370mm

Suitable for 310-380ml cartridges up to 260mm length. Hook end suitable for attaching to user’s belt.

H I-Model No. SEE BELOW

H

I

Air Caulking Gun

Accepts standard 215 x 50mm cartridges. Fitted withtrigger control for smooth application of caulking.Air Pressure: 30-40psiAir Consumption: 15cfmAir Inlet: 1/4”BSP

FModel No. AK41

F

C

G

Air Caulking Gun

Accepts standard 215 x 50mm and also larger 230 x50mm cartridges. Lightweight composite body. Triggeraction control for smooth application of caulking withanti-drip overrun function.Air Pressure: 30-40psiAir Consumption: 2cfmAir Inlet: 1/4”BSP

GModel No. AK4102

Sealant Gun

Die-cast body with aluminium tube. Supplied withplastic plunger and application nozzles. Suitable forsausage packs and cartridges. Replacement nozzlesavailable.

Cartridge Length: 250mmReplacement Applicator Nozzles: (Pack of 3) AK38/DN

DModel No. AK3801

D

Cordless Caulking Gun 4.8VVariable Rewind

Ideal for dispensing 310ml cartridges and sausagepacks. Anti-drip feature with variable rewind andvariable speed control allows pinpoint control ofcaulking bead. Superb gun for dispensing all types ofcaulking - particularly suitable for windscreen repairapplications.

Battery: 4.8VNo. of Cartridges per Charge:Ø2mm Nozzle: 15 Cartridges (Approx.)Ø6mm Nozzle: 35 Cartridges (Approx.)Speed: 372mm/minCharging Time: 1hrReplacement Battery: CPC48VRBPWeight Including Battery: 2.1kg

AModel No. CPC48VR

A

Cordless Caulking Gun 7.2V

Well balanced cordless caulking gun with ergonomichandle. Can dispense up to 15 cartridges on onecharge. Accepts standard 310ml cartridges up to220mm length. Includes extra battery, charger unit andtransformer plug. Supplied in carry-case.

Battery: 7.2V 0.8AhNo. of Cartridges per Charge:Ø2mm Nozzle: 5 Cartridges (Approx.)Ø6mm Nozzle: 15 Cartridges (Approx.)Speed: 0-270mm/minCharge Time: 3-5hrReplacement Battery: CB7205Weight Including Battery: 2.0kg

BModel No. CP72V

B

The CPC48VR features a variable rewind control.Standard cordless guns are fitted with a rewindfacility which backs off the plunger pressure oncethe trigger is released - this prevents drip ping.When applying windscreen sealant, this featureis undesirable as it inhibits smooth operation,especially around the corners.

4.8V 7.2V

Sealant Gun

Die-cast body with aluminium tube. Supplied withplastic plunger and application nozzles. Suitable forsausage packs and cartridges. Replacement nozzlesavailable.

Cartridge Length: 200mmReplacement Applicator Nozzles: (Pack of 3) AK38/DN

Model No. AK38

C

Cartridge not included.

A

H I-

Easy Load Caulking Gun

Quick to load and easy-to-use. Innovative designsuitable for use with cartridges up to 215mm in lengthand 50mm in diameter. Grips and holds rear skirt ofcartridge firmly. Simply released by pulling plungerfirmly backwards.

EModel No. New AK3802

E

Section 11 Caulking & Sealant Guns 483

Short Push Rams

Extremely short closed height makes these rams suitablefor use where there is almost no clearance at the lift point.Unique ram and cylinder bearings absorb eccentric loadstresses in order to protect the cylinder against abrasion,over-extension and jamming. Chromed rams withpolyurethane seals and wipers provide longer service life.Rams feature high flow quick connecting couplers with dustcaps. Use in conjunction with 10ton or 4ton pump andhose (610/40, 604/40 and 610/42).

Model No: RE97XS05Type: Push RamCapacity: 5000kgClosed/Open Height: 33/39mm




I L-

Push & Pull Rams

Suitable for many applications including workshop,agricultural, industrial, and construction where lifting,pushing, positioning, bending and holding of heavyloads may be required. Use in conjunction with 610/40or 604/40 Hydraulic Pump and 610/42 Hose (not included).Features: High flow, quick-connecting coupler with dust cap. Unique ram and cylinder bearings absorb

eccentric load stresses in order to protect thecylinder against abrasion, over-extension and jamming.

Chromed ram with polyurethane seals and wipers provide longer service life.

Model No: RE97XC10Type: Push RamCapacity: 10000kgClosed/Open Height: 132/189mmReturn Spring: Yes

Model No: RE97XC02Type: Push RamCapacity: 2000kgClosed/Open Height: 139/240mmReturn Spring: No

Model No: RE97XC04Type: Push RamCapacity: 4000kgClosed/Open Height: 42/58mmReturn Spring: No

Model No: RE97XM04Type: Push RamCapacity: 4000kgClosed/Open Height: 275/405mmReturn Spring: Yes

Model No: RE97XM10Type: Push RamCapacity: 10000kgClosed/Open Height: 350/500mmReturn Spring: Yes

Model No: RE97XM02Type: Pull RamCapacity: 2000kgClosed/Open Height: 422/550mmReturn Spring: Yes

Model No: RE97XM05Type: Pull RamCapacity: 5000kgClosed/Open Height: 520/650mmReturn Spring: Yes

B H-Model No. SEE BELOW

B

C

D

E

F

G

H

I

J

K

L

Specialist Push & Pull Ram Set

Comprehensive set of mini, midi and maxi sized pushand pull rams. Suitable for many applications includingworkshop, agricultural, industrial and constructionwhere lifting, pushing, positioning, bending and holdingof heavy loads may be required. Supplied in steel carry-case.

Use in conjunction with 610/40 or 604/40 HydraulicPump and 610/42 Hose (not included) - see opposite page.

Set features: High flow quick connecting couplers with dust

caps on all components. Unique ram and cylinder bearings absorb eccen tric

load stresses in order to protect the cylinder againstabrasion, over-extension and jamming.

Chromed rams with polyurethane seals and wipersprovide longer service life.

Selected rams fitted with heavy-duty return spring.

Contents:Ram Capacity/ Closed/ ReturnModel No: Type: Open Height: Spring:RE97XC02 2000kg/Push 139/240mm NoRE97XC04 4000kg/Push 42/58mm NoRE97XM04 4000kg/Push 275/405mm YesRE97XC10 10000kg/Push 132/189mm YesRE97XM10 10000kg/Push 350/500mm YesRE97XM02 2000kg/Pull 422/550mm YesRE97XM05 5000kg/Pull 520/650mm Yes

Hook Model No: Type: Application:RE97XM02.H-F Female RE97XM02RE97XM02.H-M Male RE97XM02RE97XM05.H-F Female RE97XM05RE97XM05.H-M Male RE97XM05

AModel No. RE97XCKIT

A B

Model No. SEE BELOW

I

J

K

L

C

D

E

F

G

H

Section 11 Body Repair Kits484

Hydraulic

Snap Body Repair Kit 10ton

Heavy gauge snap-together pipe work and castattachments compatible with most leading makes ofsnap-together equipment. Supplied with hand-pump,hose, hydraulic ram and storage case.

AModel No. RE97/10

A

Snap Body Repair Kit 4ton

Heavy gauge snap-together pipe work and castattachments compatible with most leading makes ofsnap-together equipment. Supplied with hand-pump,hose, hydraulic ram and storage case.

BModel No. RE97/4

B

Snap

10ton

Snap

4ton

SuperSnap® Body Repair Kit10ton

SuperSnap® kit features snap together pipe work forspeed and threaded attachments for strength.Connecting parts are zinc or cad plated for long, rust-free life. Components are manufactured from highquality steel and finished with red supergloss paint. Allattachments interchange with other popular makes soyou can use your existing equipment with theSuperSnap® range.

CModel No. RE83/10

C

SuperSnap® Body Repair Kit4ton

SuperSnap® kit features snap together pipe work forspeed and threaded attachments for strength.Connecting parts are zinc or cad plated for long, rust-free life. Components are manufactured from highquality steel and finished with red supergloss paint. Allattachments interchange with other popular makes soyou can use your existing equipment with theSuperSnap® range.

DModel No. RE83/4

D 4ton

10ton

SuperSnap

SuperSnap

Section 11 Body Repair Kits 485

PANEL TOOLSSee Body Shop section, pages 490 to 493 for our full range

of panel tools.

Hydraulic

Hydraulic

Hydraulic

Hydraulic

MacPherson Strut Pulling Kit10ton

Clamps to strut tower and allows 360° alignment. Tophook permits realignment of sunken tower assemblies.Can be used with Large Hook Pulling Kit RE92/1 1.

Capacity: 10ton

DModel No. RE92/19

D

10ton

SuperSnap® Pull Ram Kit 5ton

Suitable for use with manual or air hydraulic pump.Supplied with connectors and two chain claws.Capacity: 5tonStroke: 140mmLength: 445mm

AModel No. RE91/5

A

Pull Ram Kit 10ton

Spring-return pull ram, suitable for use with manual orair powered hydraulic pumps. Supplied with two chainhooks.

Capacity: 10tonStroke: 150mmRam Length Extended: 500mm

BModel No. RE91/10

B

Aperture Restraining Bars

Manufactured with steel tube and heavy jaw assemblies. Designed to triangulate and strengthen door apertureswhilst performing pulling operations. Supplied with tommy bar.

Jaw Width: 90mmMinimum Length: 830mmMaximum Length: 1160mm

EModel No. DR66

E

Large Hook Pulling Kit 6ton

Suitable for reaching over wide obstructions. Ideal forinside boot recesses. Reduces marking due to chains.Supplied with two sizes of feet and adaptor forSuperSnap® screw-on accessories and heads.

Capacity: 6ton

CModel No. RE92/11

C5ton 10ton

6tonSuperSnap

F

Telescopic Trammel GaugeMetric

Aluminium measuring device constructed in foursections. Suitable for obtaining precise dimensionaldata for chassis alignment purposes. Integralmeasuring tape provides fast Metric read-out betweenend probes. Mid probe read-out obtained by markingson exterior of pole. Includes three fully adjustableprobes. See below for specification.

FModel No. RE50

Mini Telescopic Trammel GaugeMetric

Aluminium measuring device constructed in foursections. Compact design suitable for obtainingprecise dimensional data for chassis alignmentpurposes especially around the engine bay and cockpitareas. Integral measuring tape provides fast Metricread-out between end probes. Mid probe read-outobtained by markings on exterior of pole. Includesthree fully adjustable probes.

Model No. RE50 RE501Min. Dist - End Probes: 1050mm 500mmMax. Dist - End Probes: 3000mm 1050mmMin. Dist - Mid/End Probes: 170mm 165mmMax. Dist - Mid/End Probes: 730mm 350mm

GModel No. RE501

G

F G

Section 11 Pulling Accessories & Trammel Gauges486

A

SuperPull® Hydraulic Chassis Straightener Variable Tilt 10ton

All components are fully interchangeable with the rest of the DZ range. V ariable position upright allows sixpre-set angles of pull, plus a seventh upright position. Supplied as standard with SuperSnap® manual hydraulicpump and ram.

Contains: Chassis Frame, SuperSnap® Hydraulic Pump & Ram, 2 x Pull Clamps, 2 x Sill Clamps, 2 x Chains, 2 x Chain Hooks, Carriage Anchorage Tube, 2 x Tube Stands

DModel No. DZRE92/C

D

10ton

10ton

SuperPull® Hydraulic Chassis Straightener 10ton

One of the biggest selling chassis repair systems in the UK with proven performance over the last 25 years.Heavily reinforced frame and components. Supplied as standard with SuperSnap® manual hydraulic pump andram.Contains: Chassis Frame, SuperSnap® Hydraulic Pump & Ram, 2 x Pull Clamps, 2 x Sill Clamps, 2 x Chains,2 x Chain Hooks, Carriage Anchorage Tube, 2 x Tube Stands

AModel No. DZRE84/C

SuperPull

SuperPull

Air Hydraulic Pumps

Suitable for use with SuperSnap ® hydraulic ram assupplied with both straighteners and body kits.Supplied with or without air hose.

Model No. Specification:RE83/840 Air Pump onlyRE83/840/CWH Air Pump with Hose

Air Supply Pressure: 60-120psiOil Pressure: 10000psiOil Capacity: 530cc


C

B

Two-Position Extra Long SillClamps

Considering the wide range of vehicles on the market,sometimes the standard sill clamps just will not fit. TheRE92/29 clamps give an extra positional choice for thecarriage anchorage tube and, because of their extralength, they grip the sill tighter.

EModel No. RE92/29

E

Chain Kit

Use in conjunction with RE91/5 pull ram. The kitcontains 2 x 1.5mtr chains each with 1 hook and 2heavy-duty pull clamps.

CModel No. RE91/5/CK

Section 11 Chassis Straighteners 487

Hydraulic

Hydraulic

Air Hydraulic

Multi-Hole Pull Plate

Bolts directly onto chassis. Prevents chain marking.

Capacity: 6ton

DModel No. RE92/18

D

Hooks & Chain Shorteners

Suitable for use with body repair kits and chassis straighteners.Model No: Description: Capacity:

RE92/03 Hook - Fork End 6tonRE92/04 Double Hook - Fork End 6tonRE92/05 Chain Shortener 6ton


A

1

1

2

3

23

Safety Cable

Safety cable for use when using pull clamps onbodywork. In the event of the pull clamp becomingdetached from the vehicle bodywork under tension theuse of the safety cable will minimize the risk of seriousinjury.Cable Length: 2mtr

BModel No. RE92/SC

B

Wheel Arch Puller 320mm

Suitable for wheel arches and other small/lightweightpulls including those around light clusters.

Length: 320mmCapacity: 1.5ton

EModel No. RE99/09

E

Wheel Arch Puller 160mm

Suitable for wheel arches and other small/lightweightpulls including those around light clusters.

Length: 160mmCapacity: 1.5ton

FModel No. RE99/10

F

Mechanic’s GlovesSynthetic Palm with Tactouch - Pair

Close fitting gloves suitable for professional workshopuse. Synthetic palm with Tactouch finish for fine controland sure grip. Suitable for use with air poweredworkshop tools. Stretch Spandex ® glove back foradded comfort. Washable materials.Model No: Size:MG801M MediumMG801L LargeMG801XL X-Large


H

Cross Beam Adaptor 1ton

Provides extra safety when locating awkward jackingpoint. Ideal for front-wheel-drive vehicles. Saves timeloading and unloading jigs when used with a high liftjack. See page 151 for full details.

GModel No. X135

G

See pages 709 to 712 for our full range of Hand Protection.

1ton

2mtr

Pull Clamps

Suitable for use with body repair kits and chassis straighteners.Model No: Description: Capacity:

RE92/12 35mm 2-Directional Pull Clamp 4tonRE92/20 100mm Universal Pull Clamp 6ton

& Rotating Ring


C

12

1

2

6ton

6ton

6ton

1.5ton 1.5ton

4ton

Section 11 Pulling Accessories488

Wheel Skate Rack

Rack stores four wheel skates safely and convenientlyand is easily manoeuvred on four castors. Suitable forSealey Wheel Skate Model No. WS570.Width: 745mmDepth: 490mm

DModel No. WSST

D

Transportacar Trolley Economy 2ton

Steel framework designed for supporting and moving partly dismantled or badly damaged vehicles around theworkshop or body shop. Sliding castor brackets adjust for width and rubber-faced support pads adjust for height.

Capacity: 2tonDepth: 430mmHeight Minimum/Maximum: 290/370mmWidth Maximum: 1500mmCastor Ø: 120mm

BModel No. RE89

B

A

Wheel Skate Mechanical570kg Capacity

Steel chassis with pedal operated mechanical liftingaction. Skate sits on easy rolling Ø50mm nylon castors.Composite rollers cradle vehicle’s tyre and are capableof handling up to 240mm profiles. Suitable forshowrooms, body shops, hotels, pubs and car parks - infact anywhere a disabled vehicle needs to be moved.Note: Skates sold as singles, but must be used in pairs.Capacity: 570kgMaximum Opening: 620mmMaximum Tyre Profile: 240mmCastor Ø: 50mmWeight: 17.5kg

CModel No. WS570

C

Wheel Dolly Set 454kg Capacity

Pressed steel wheel dolly with four Ø90mm metalcastors. Can handle up to 355mm profiles. Suitable foruse in body shops, workshops and car parks.Capacity (Each): 454kgMaximum Tyre Profile: 355mmCastor Ø: 90mmWeight (Each): 10kg

EModel No. WS454

E

2ton

2ton

A

A

Wide

Narrow

570kg

Transportacar Trolley Adjustable 2ton

Heavy-duty steel frame-work suitable for supporting partly dismantled or badly damaged vehicles. Enableseasy movement around body shop. Supports interchangeable between V -crutches and sill clamps. Supportsand clamps adjustable for height and overall width. Fitted with four Ø125mm nylon castors, two of which lock.

Using with Crutches:Minimum Height: 250mmMaximum Height: 310mmUsing with Sill Clamps:Minimum Height: 330mmMaximum Height: 390mmMinimum Width*: 1035mmMaximum Width*: 1430mmCapacity: 2ton*Widths measured between centres of jacking points

AModel No. RE901

F

Wheel Skate Hydraulic680kg Capacity

Steel tube chassis with four Ø100mm nylon castors.Pedal operated hydraulic lifting action with safetylocking pin when under load. Composite rollers cradlevehicle’s tyre and are capable of handling up to240mm profile. Suitable for body shops, garages,showrooms or anywhere a disabled vehicle needsmoving on even ground.Note: Skates sold as singles, but must be used in pairs.Capacity: 680kgMaximum Opening: 540mmMaximum Tyre Profile: 240mmCastor Ø: 100mmWeight: 17kg

FModel No. WS680

680kg

Section 11 Vehicle Trolleys & Skates 489

Nylon Body Shop Chisels

Nylon body shop chisels. Heads may be re-shapedwith a file to suit work in hand. Especially suited to bodyshop panel applications.

Model No: Width: Length:RE4500 95mm 280mmRE4501 95mm 280mmRE4502 65mm 180mm


H I

J

Rubber Heel Dolly

Weighted dolly with rubber coating to providecushioning. Curved edge enables use in recessedcorners. Ideal for use on thinner material.

JModel No. CB1

Interchangeable Head BodyRepair Kit/Panel Beating Set 11pc

Hammer body made from drop-forged steel with quickrelease double locking pin and PVC handle for comfortand control. Nine interchangeable heads made fromChrome V anadium steel. Supplied with multi-dolly(CB31) for use in tight areas. Supplied in storage case.Contents: Hammer Body , Interchangeable Heads; Cross Curve, Ball Pein (Large & Small), Ball, Small Curved, Angle Grooved, Round Face, Square Face, Multi Curved, Multi-Dolly 3-in-1 (CB31)

GModel No. CB11

G

Panel Beating Set 7pcwith Fibreglass Shafts

Polished, drop-forged steel dollies. Hammers withfibreglass handle and rubber grips. Supplied in toughstorage case.Contents: Pein Hammers; Shrinking, Pick, Straight, Dollies; Universal, Heel, Curved, Mushroom

AModel No. CB707

A

Panel Beating Set 3pc

Fully polished, drop-forged steel dollies and hammerswith composite handles and rubber grips.

Contents: Body Hammer, Dollies; Universal, Heel

BModel No. CB3

B

Deluxe Panel Beating Set 5pcwith Hickory Shafts

Fully polished, drop-forged steel dollies. Professionalhickory handled hammers. Supplied in storage case.Contents: Hammers; Shrinking, Pick, Dollies; Toe, Curved, Drip Moulding Spoon

EModel No. CB5

E

C

Panel Beating Set 7pcwith Hickory Shafts

Polished, drop-forged steel dollies. Professional hickoryhandled hammers. Supplied in tough storage case.Contents: Pein Hammers; Shrinking, Pick, Straight, Dollies; Universal, Heel, Curved, Mushroom

DModel No. CB507

D

Multi-Dolly 3-in-1

Small design allows access in tight spots for panelrepair. Features a choice of three heads for variousapplications. Smoothing round face, spoon curve dollyand an awl type dolly for internal concave beating.

IModel No. CB31

1

1

2

3

23

F

Deluxe Panel Beating Set 7pcwith Hickory Shafts

Fully polished, drop-forged steel dollies. Professionalhickory handled hammers. Supplied in storage case.Contents: Hammers; Shrinking, Pick, Curved, Dollies; Utility, Curved, Heel, Toe

FModel No. New CB57

Panel Beating Set 7pc

Fully polished, drop-forged steel dollies and hammerswith composite handles and rubber grips.Contents: Hammers; Body , Pick, Bumping,Dollies; Universal, Heel, Mushroom, Combination

CModel No. CB7

Section 11 Panel Beating Tools490

C

Slide Hammer Kit 9pcin Carry-Case

Slide hammer kit with 3.5lb sliding weight. Comfortablerubber grip handle for added control. Supplied in toughcarry-case with storage for set of attachments.Attachments: Large & Small Flat Hooks, Large & Small Round Hooks, Screw Holder , Adaptor, Self Tapping Screw, Taper Screw

CModel No. DP935B

I

Slide Hammer Kit 9pcin Carry-Case

Slide hammer kit with 5lb sliding weight. Comfortablerubber grip handle for added control. Supplied in toughcarry-case with storage for set of attachments. Attachments: Large & Small Flat Hook, Large & Small Round Hook, Screw Holder , Adaptor, Self Tapping Screw, Taper Screw

BModel No. DP9/5B

Wavy-Wire Strip for PanelPulling System 50pc

Pack of 50 wavy-wires. Suitable for panel pulling systems.

JModel No. RE100/WS

J

Slide Hammer Kit 9pc

Steel shaft hammer with comfortable plastic grip. 5lbSliding weight. Supplied in display carton.Attachments: Small & Large Flat Hook, Small & Large Round Hook, Screw Holder , Adaptor, Self Tapping Screw, Taper Screw

AModel No. DP9/5

D

A B

Flat Cutting Chisel

Chrome Vanadium steel flat chisel suitable for themanual cutting of spot welds.Length: 235mm

EModel No. AK570

E

Double-Sided Panel CuttingChisel

Chrome Vanadium steel panel cutting chisel suitablefor the manual cutting of body panels.Length: 205mm

FModel No. AK571

F

Suction Dent Puller Ø150mm

Strong suction will pull out panel dents, move glasspanels and aid handling. Suction releases simply bylifting the edge.Size: Ø150mm

IModel No. AK98

G

Air Suction Pad for RE101Ø60mm

Air activated suction pad for use with Sealey Model No.RE101.Size: Ø60mmWorking Pressure: 150psi

HModel No. New RE101.60

H

Air Suction Dent Puller

Air activated suction pad keeps firm hold of panelwhile slide hammer is used to ease out dents anddepressions without damage to the paint surface. Idealfor initial panel reshaping. Supplied with large andsmall suction pads.Suction Pads: Ø120mm, Ø155mmLength: 600mmOptional Ø60mm Suction Pad: RE101.60Working Pressure: 90psi

DModel No. RE101

Panel Seam Splitter Set 3pc

Ideal for separating spot-welded panels during repairs.Stainless steel coated Chrome Vanadium go-throughshafts allow use with hammers. Soft grip handles forcomfort and control. Includes straight, 30° of fset and90° angle splitters.

Contents: 1 x Straight, 1 x 30° Offset, 1 x 90° Angle

GModel No. New AK579

IMPORTANT SAFETYWARNING!

Always wear eye or face protection when usingthese tools! For a full range of goggles, visors,gloves and ear defenders, plus other safetyequipment, see pages 707 to 717 of thiscatalogue.

491Section 11 Panel Tools

C

Tinman’s Shears

One-piece, drop-forged blades with spring loadedhandles. Suitable for cutting narrow gauge ferrous andnon-ferrous metal sheet.Capacity: 0.8mmLength: 250mm

CModel No. AK6910

D

B

Straight Pattern Tin Snips

One-piece, drop-forged handles with induction hardenedblades to 55-60 HRC. Cushion grip handle. Cuts up to0.8mm cold rolled steel or 0.45mm stainless steel.Capacity: 0.8mmLength: 250mm

BModel No. AK6911

E

Deburring Tool

Composite grip with interchangeable swivel cuttingbits. Spare cutter stored in handle. Suitable fordeburring pipes and sheet materials.Length: 150mm

IModel No. DB01

I

Hand Nibbler Shears

Suitable for cutting metal and plastics without paneldistortion. Interchangeable Chrome Molybdenum steelcutting jaws with safety lock. Contour grip, non-sliphandles for extra comfort and safety . Blades areconsumable items and are not covered by the lifetimeguarantee.Maximum Thickness: 1.2mm SteelMaximum Hardness: 85 HRCReplacement Centre Blade: AK327/B

AModel No. AK327

A

Generation Air Nibbler

Third Generation air nibbler features contoured andinsulated handle to protect operator from the effects ofvibration and chill. Smooth operating mechanismsuitable for cutting intricate shapes in steel up to1.5mm thick.Maximum Cutting Capacity: 1.5mm (Steel)Free Speed: 3500spmAir Consumption: 6cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.0kgReplacement Cutter & Die: GSA28.39-40

HModel No. GSA28

H

Generation Air Shears

Third Generation air nibbler features contoured andinsulated handle to protect operator from the effects ofvibration and chill. Smooth operating mechanismsuitable for cutting straight lines in steel sheet up to1.2mm thickness.Maximum Cutting Capacity: 1.2mm (Steel)Air Consumption: 6cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.6kgReplacement Outer Blade Left: GSA53.34Replacement Outer Blade Right: GSA53.37Replacement Centre Blade: GSA53.35

GModel No. GSA53

HfofsbujpoBjsUppmtHfofsbujpoBjs

Uppmt

G

Replacement Cutter Crowns

Double sided cutter crowns for Z1 spot removal tool.Pack of two.

KModel No. Z1C2

10mm Spot Weld Cutter

Spring loaded centre point guides cutter crown ontospot weld. Fine adjustment of cutting depth by screwpermits top panel to be removed leaving the lowerpanel free to be dressed clean for replacement panel.Suitable for air and electric drills.

JModel No. Z1

J K

Aviation Tin SnipsStraight Cut

Drop-forged, Chrome V anadium, tempered steelblades with serrated jaws. Self opening, spring actionhandles with composite, contoured grips and safetycatch.Cut: StraightLength: 250mm

EModel No. AK69/S

Tinman’s Shears

One-piece, drop-forged blades with spring loadedhandles. Suitable for cutting narrow gauge ferrous andnon-ferrous metal sheet.

Capacity: 0.8mmLength: 300mm

DModel No. AK6912

Aviation Tin Snips Set 3pc

Drop-forged, Chrome V anadium, tempered steelblades with serrated jaws. Self opening, spring actionhandles with composite, contoured, colour coded gripswith safety catch.Contents: Left, Right, StraightLength: 250mm

FModel No. AK6907

F

Section 11 Panel Tools492

Metal Punch Set 14pc

Heavy-duty drop-forged and heat-treated steel punchbody with compound lever action. Suitable forprecision punching of holes in steel, aluminium, brass,copper and plastic. Fitted with gauge for depthadjustment up to 50mm. Suitable for materials up to 14gauge. Punches and dies hardened to 55-60 HRC.Supplied in carry-case.Contents: 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 9/32”

EModel No. AK9821

E

Joggler/Flanging Tool

All steel construction with spring loaded handles.Precision jaws make 10mm flange on 18-20 gauge mildsteel or aluminium sheet and provide smooth flush jointbetween panels. Fitted with non-slip PVC grips.

Length: 280mm

AModel No. RE92/30

A B

Door Skin Folding Tool

Suitable for pre-forming and finishing door skins ontodoor frames. Also suitable for joining sheet material.Fitted with nylon pad to prevent panel deformation.

Length: 300mm

DModel No. RE92/33

D

C

Joggler & Punch Tool

All steel construction with swivel head. Joggler toolproduces a 10mm lip on 18-20 gauge mild steel oraluminium sheet. Push and turn head to produce 6mmholes. Ideal for spot/MIG welding car panels. Fittedwith non-slip PVC grips.Length: 290mm

BModel No. RE92/31

Locking C-Clamp & WeldingClamp Set 3pc

Heat treated steel grips and jaws with bright nickel-plated finish. C-Clamp features swivel pads. Knurledadjusting screw with lever type release. Supplied intool roll.

Contents: Sheet Metal Clamp 248mm, WeldingClamp 225mm, Locking C-Clamp 280mm

GModel No. AK67

G

Locking C-Clamp Set 3pc

Heat-treated steel jaws with bright nickel plate finish.Knurled jaw adjustment screw with lever type release.Supplied in tool roll.Length: 170, 275, 450mm

FModel No. AK66

F

L-Tip LockingGrip

Model No: AK6832Length: 195mmJaw Capacity: 0-18mmJaw Width: 18mm

H

LL-Tip Locking Grip


I

J-Tip Locking Grip


J

JJ-Tip Locking Grip


KW-Tip LockingGrip


L

Fabrication/Welding LockingGrips One-Handed Operation

Manufactured with rounded contours for smooth,secure handling. Grips feature linear jaw action whichapplies pressure perpendicular to the workpiece forsecure clamping. Compact size with push-button jawrelease is ideal for working in confined spaces. Thumbrelease action allows one-handed operation. Suitablefor a wide variety of applications including welding,gluing and riveting.

Model No. SEE BELOW

H L-

Punch Tool Ø5mm

All steel construction with spring loaded handles.Ø5mm Holes are suitable for preparing panels forMIG/spot welding. Fitted with non-slip PVC grips.Throat Depth: 15mmMaximum Material Thickness: 1mmLength: 290mm

CModel No. RE92/35

Section 11 Panel Tools 493

Two-Way Riveting Kit

Two-position head allows jaws to work either at 90° or180° to the workpiece. Chrome Molybdenum jaws insteel jaw case. Supplied with four nozzles to accept 2.4mm(3/32”), 3.2mm(1/8”), 4.0mm(5/32”) and4.8mm(3/16”) rivets. Suitable for aluminium and steelrivets. Supplied with nozzle wrench, a selection ofapproximately 60 assorted rivets and carry-case.Length: 280mmRivet Type:Aluminium: Steel: Stainless Steel:

EModel No. AK397

E

Swivel Head Riveting Kit

Pressed steel body with cast swivel head and ChromeMolybdenum steel jaws. Supplied with four rivet nozzlesto accept 2.4mm(3/32”), 3.2mm(1/8”), 4.0mm(5/32”) and4.8mm(3/16”) rivets. Suitable for aluminium rivets. Fittedwith non-slip rubber grip handles and supplied withnozzle wrench and selection of approximately 80 rivets.Length: 280mmRivet Type:Aluminium: Steel: Stainless Steel:

FModel No. AK99/SH

Extra-Heavy-Duty Riveter

High grade aluminium die-cast body with heat-treatedcarbon steel handle. Heat-treated chrome steel three-piece jaws and jaw case. Composite hand gripswith wrench storage. Four nozzles to accept2.4mm(3/32”), 3.2mm(1/8”), 4.0mm(5/32”) and4.8mm(3/16”) rivets. Supplied with nozzle wrench.Length: 250mmRivet Type:Aluminium: Steel: Stainless Steel:

CModel No. AK992

CBA

Heavy-Duty Riveter

Drop-forged aluminium body with heavy-duty SCM4grade jaws, carbon steel jaw case and pin. PVC handle grips. Supplied with four rivet nozzles to accept 2.4mm(3/32”), 3.2mm(1/8”), 4.0mm(5/32”) and 4.8mm(3/16”) rivets. Supplied with nozzle wrench.Length: 270mmRivet Type:Aluminium: Steel: Stainless Steel:

DModel No. AK9902

D

E F

2-Way

Swivel Head

F

Sheet Metal Screws 305pc

Zinc plated pan head sheet metal screws. Partitioned case.Contents: #4 x 1/2”, #6 x 1/2”, #6 x 5/8”, #6 x 3/4”, #8 x 5/8”, #8 x 3/4”, #8 x 1”, #10 x 1/2”, #10 x 3/4”, #10 x 1”, #10 x 1-1/4”, #10 x 1-1/2”

GModel No. BMS305

G

AIR DRILLSSee pages 518 & 519 for details of our comprehensive range of Air Drills.

Riveting Kit

High grade aluminium die cast body with heat treatedcarbon steel handle. Heat treated chrome steel jawsand jaw case. Composite hand grips. Four nozzles toaccept 2.4mm(3/32”), 3.2mm(1/8”), 4.0mm(5/32”) and4.8mm(3/16”) rivets. Supplied with nozzle wrench. Kitincludes a selection of aluminium rivets.Length: 250mmRivet Type:Aluminium: Steel: Stainless Steel:

AModel No. AK99

Heavy-Duty Riveter

High grade aluminium die-cast body with heat-treatedcarbon steel handle. Heat-treated chrome steel jawsand jaw case. Composite hand grips with wrenchstorage. Four nozzles to accept 2.4mm(3/32”),3.2mm(1/8”), 4.0mm(5/32”) and 4.8mm(3/16”) rivets.Supplied with nozzle wrench.Length: 250mmRivet Type:Aluminium: Steel: Stainless Steel:

BModel No. AK991

Section 11 Hand Riveters494

Long-Arm Riveter

Die-cast head with 400mm long tubular steel handlesfor extra leverage. Spring return and compound jawaction. Supplied with four nozzles and suitable foraluminium and stainless steel rivets. Fitted withcomfortable rubber hand grips. Includes nozzlewrench/retainer.

Length: 470mmIncludes: Nozzles; 2.4mm(3/32”), 3.2mm(1/8”), 4mm(5/32”), 4.8mm(3/16”), WrenchRivet Type:Aluminium: Steel: Stainless Steel: Blind Rivets: Structural Rivets:

AModel No. AK398

A

Heavy-Duty Long-Arm Riveterwith Collection Bowl

Precision made triple, high grade alloy steel jaws withstrong aluminium body. Forged alloy steel pins andbolts with double handle bearings for long life anddurability. Suitable for aluminium, steel and stainlesssteel rivets. Includes Chrome Molybdenum specialprofile nozzles for structural rivets up to 6.4mm(1/4”).Length: 540mmIncludes: Nozzles; 3/3.2mm(1/8”), 4mm(5/32”),4.8/5mm(3/16”), Structural Steel Nozzles; 4.8mm(3/16”),6.4mm(1/4”), WrenchRivet Type:Aluminium: Steel: Stainless Steel: Blind Rivets: Structural Rivets:

BModel No. AK3981

B

D

Lazy Tong Riveter

Die-cast head with steel jaw case and ChromeMolybdenum jaws for aluminium, steel and stainlesssteel rivets. Suitable for repetitive type riveting tasks.Supplied with three nozzles.

Length: 880mmIncludes: Nozzles; 4mm(5/32”), 4.8mm(3/16”), 6.4mm(1/4”)Rivet Type:Aluminium: Steel: Stainless Steel: Blind Rivets: Structural Rivets:

CModel No. AK39902

C

E

Aluminium Blind Rivets in Tubs

Steel shafted aluminium rivets in handy sized tubs.

Model No: Approx. Qty: Size:AK99/6 2000pc 3.2mm(1/8”) x 10.2mmAK99/7 1200pc 4.0mm(5/32”) x 10.2mmAK99/8 800pc 4.8mm(3/16”) x 10.2mm


F

Aluminium Blind Rivets

Steel shafted aluminium rivets. Average 100 rivets perbag.

Model No: Size:AK99/1 3.2mm(1/8”) x 6.2mmAK99/2 3.2mm(1/8”) x 8.0mmAK99/3 4.0mm(5/32”) x 8.0mmAK99/4 4.8mm(3/16”) x 8.9mmAK99/5 2.4mm(3/32”) x 8.9mm


GLazy Tongs Riveter

Die-cast head with steel jaw case and three-piece jawsfor aluminium, steel and stainless steel rivets. Suitablefor repetitive riveting tasks. Supplied with five nozzlesand wrench.

Length: 790mmIncludes: Nozzles; 2.4mm(3/32”), 3.2mm(1/8”),4mm(5/32”), 4.8mm(3/16”), 6.4mm(1/4”), WrenchRivet Type:Aluminium: Steel: Stainless Steel: Blind Rivets: Structural Rivets:

DModel No. AK399

Heavy-Duty Lazy Tongs Riveter

Precision made triple, high grade alloy steel jaws withstrong aluminium body. Forged alloy steel pins andbolts with double handle bearings for long life anddurability. Suitable for aluminium, steel and stainlesssteel rivets. Includes Chrome Molybdenum specialprofile nozzles for structural rivets up to 6.4mm(1/4”).Length: 835mmIncludes: Nozzles; 4.8/5mm(3/16”), 6mm,6.4mm(1/4”), Structural Steel Nozzles; 4.8mm(3/16”),6.4mm(1/4”), WrenchRivet Type:Aluminium: Steel: Stainless Steel: Blind Rivets: Structural Rivets:

EModel No. AK395

Section 11 Hand Riveters 495

Section 11 Threaded Nut Riveters496

Air/Hydraulic Riveter

Powerful tool suitable for both aluminium and steel rivetsup to 4.8mm(3/16”). Supplied with four riveting nozzlesand two wrenches. Trigger operated riveter withhardened steel jaw assembly and rivet shaft safety cap.

Nozzle Sizes: 2.4mm(3/32”), 3.2mm(1/8”),4mm(5/32”), 4.8mm(3/16”)Air Consumption: 4.2cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.3kgRivet Type:Aluminium: Steel: Stainless Steel:

CModel No. SA31

C

Blind, Nut & Stud Riveting Kit

Suitable for rivets, rivet nuts and rivet studs in aluminium, steel and stainless steel.360° Swivel head gives greatly improved accessibility . Four nozzles for standardrivets, four mandrels for rivet nuts and three mandrels for rivet studs. Supplied withwrenches and a selection of steel rivet nuts.Rivet Sizes: 2.4mm(3/32”), 3.2mm(1/8”), 4.0mm(5/32”), 4.8mm(3/16”)Rivet Nut Sizes: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1Rivet Stud Sizes: M4 x 0.7, M5 x 0.8, M6 x 1Rivet Materials: Aluminium, Steel, Stainless SteelRivet Nuts Supplied: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1 (10 each size)

AModel No. AK396

A

Rivet & Threaded Nut Rivet Kit

Drop-forged frame with patented folding mechanism for compact storage.Comfortable cushion grips. Suitable for installing rivet nuts for securing threads inthin sheet material. Heavy-duty head suitable for threaded rivets up to M10. Suitablefor aluminium, steel and stainless steel threaded rivets and blind rivets.Standard Threaded Rivet Mandrel Sizes: M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5Standard Blind Rivet Mandrel Sizes: 3.2, 4.0, 4.8, 6.4mmFolded Length: 285mmUnfolded Length: 510mm

BModel No. AK39602

B

D

C

B

A

A

For details of our full range of Air Riveters see page 527.

Flat Head Aluminium ThreadedRivets

Model No: Thread Size: Qty: Capacity:AK396/1 M3 x 0.5mm 50pc 0.25-1.5mmAK396/2 M4 x 0.7mm 50pc 0.5-2.5mmAK396/3 M5 x 0.8mm 50pc 0.5-2.5mmAK396/4 M6 x 1.0mm 15pc 1.0-4.0mmAK39602/1 M8 x 1.25mm 10pc 1.0-4.0mmAK39602/2 M10 x 1.5mm 10pc 1.0-4.0mm


D E

C

Ø150mm

210 x 115mm Ø150mm

Ø150mm

450W

750W

500W

ELECTRIC POLISHERS& SANDERS

We stock a comprehensiverange of Electric Polishersand Sanders See pages 565to 567 for more details.

A

Pad not included.

B

Ø150mm

150mm Dust-Free Air RandomOrbital Sander

Fitted with patented air diversion system whichmaximizes level of dust collection. High quality DAsander with internally chromed cylinder and precisionbearings for super-smooth operation. Fitted with airflow control valve and housing insulation to preventhand chill. Pad not included.

Pad Size: Ø150mm - 5/16”UNFFree Speed: 8000-10000rpmOperating Pressure: 90psiFree Air Consumption: 10.6cfmAir Inlet: 1/4”BSPVac Outlet Ø: 28mmOptional Dust-Free Pad: AK289 or AK290

BModel No. SA7/AS


Fitted with patented air diversion system whichmaximizes level of dust collection. Lightweight,balanced aluminium body with smooth double bearingcounter balance assembly for fatigue free operation.Fitted with air flow control valve, safety knuckle guardand housing insulation to prevent hand chill. Pad notincluded.

Pad Size: Ø150mm - 5/16”UNFFree Speed: 8000-10000rpmOperating Pressure: 90psiFree Air Consumption: 10.6cfmAir Inlet: 1/4”BSPVac Outlet Ø: 28mmOptional Dust-Free Pad: AK289 or AK290

AModel No. SA7/SAS

150mm Premier Dust-Free Air Palm Sander

Polycarbonate outer housing with soft rubber handgripreduces hand-chill and vibration with an overall weight of 0.7kg. Features adjustable air regulator foradditional control. Exhaust muf fler to reduce noiseemission. Dust-free outlet for use with centralised dustextraction systems. Supplied with hook-and-loop pad.

Pad Size: Ø150mmThread Size: 5/16”UNFFree Speed: 10000rpmAir Consumption: 16cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPVac Outlet Ø: 28mmWeight: 0.7kgSupplied with: Universal S/A Dust-Free Pad

CModel No. SA801

Flat Bed Dust-Free ElectricOrbital Sander

Vertical type orbital sander with rectangular sandingplate configuration. Accepts standard 115mm papersand is fitted with spring loaded paper retaining clamps.Tough composite body shell with trigger type operationand power lock control. Supplied with side handle.

Pad Size: 210 x 115mm Power: 500W - 230VNo Load Speed: 8000rpmOrbit: 5mm

DModel No. EM110/DFS

150mm Heavy-Duty Dust-FreeElectric Orbital Sander

Vertical type orbital sander for heavy-duty sandingapplications. Tough composite body shell with triggertype operation and power lock control. Supplied withside handle and pad.

Pad Size: Ø150mm - 5/16”UNFPower: 450W - 230VNo Load Speed: 8000rpmOrbit: 8mmSupplied with: Universal S/A Dust-Free Pad

EModel No. ER150D/DFS

150mm Dust-Free Electric RandomOrbital Sander Variable Speed

Features variable speed control ranging from 4000 to7000rpm. Rotating self-contained dust extraction portwith dust collection bag. Alloy bevel gear head withcomposite motor housing. Supplied with Ø150mmhook-and-loop backing pad and side handle.

Pad Size: Ø150mmMotor Power: 750WSupply: 230V - 2.8ANo Load Speed: 4000-7000rpmOrbit Size: 3.5mmWeight: 2.9kgReplacement Pad: DAS151.06

FModel No. New DAS151

F

Dust-Free

Dust-Free

Dust-Free

Dust-Free

Pad not included. Ø150mm

Dust-Free

Dust-Free

Self-Contained

VARIABLE SPEED

Section 11 Dust-Free Sanders 497

HEAVY DUTY

Premier

Section 11 Dust-Free Sanders498

E

400 x 70mm

150mm Dust-Free Self ContainedAir Dual Action Sander

High quality air tool manufactured in the EU. All internalcomponents are chromed or are resistant to rust for long,trouble-free operation. Self-contained unit with integraldust collection system, means no additional vacuumdevices are required. Requires no oil mist air supply ,reducing contamination of prepared surfaces. Justlubricate when laying up tool for the weekend orprolonged periods and run out oil before starting work.Pad Size: Ø150mm - 5/16”UNFFree Speed: 8000-10000rpmOperating Pressure: 75-90psiAir Consumption: 10.6cfmAir Inlet: 1/4”BSP + CouplingVacuum Outlet: Ø28mmSupplied with: Ø150mm Universal S/A Dust-Free Pad

BModel No. MA150SC Flat Bed Dust-Free

Air Orbital Sander

High quality air tool manufactured in the EU. All internalcomponents are chromed or are resistant to rust forlong, trouble-free operation. Requires no oil mist airsupply, reducing contamination of prepared surfaces.Just lubricate when laying up tool for the weekend orprolonged periods and run out oil before starting work.

Pad Size: 210 x 115mmFree Speed: 8000-10000rpmOperating Pressure: 75-90psiAir Consumption: 15.2cfmAir Inlet: 1/4”BSP + CouplingVacuum Outlet: Ø28mm

CModel No. MA110AS


High quality air tool manufactured in the EU. All internalcomponents are chromed or are resistant to rust forlong, trouble-free operation. Requires no oil mist airsupply, reducing contamination of prepared surfaces.Just lubricate when laying up tool for the weekend orprolonged periods and run out oil before starting work.Pad Size: Ø150mm - 5/16”UNFFree Speed: 8000-10000rpmOperating Pressure: 75-90psiAir Consumption: 14.8cfmAir Inlet: 1/4”BSP + CouplingVacuum Outlet: Ø28mmSupplied with: Ø150mm Universal S/A Dust-Free Pad

AModel No. MA150AS

A B

Long Bed Dust-Free Air Orbital Sander

High quality air tool manufactured in the EU. All internal components are chromed or are resistant to rust for long,trouble-free operation. Requires no oil mist air supply , reducing contamination of prepared surfaces. Justlubricate when laying up tool for the weekend or prolonged periods and run out oil before starting work.Pad Size: 400 x 70mmFree Speed: 8000-10000rpmOperating Pressure: 75-90psiAir Consumption: 15.2cfmAir Inlet: 1/4”BSP + CouplingVacuum Outlet: Ø28mm

EModel No. MA407AS

For our full range ofAir Sanders seepages 529 to 533.

Ø150mm Ø150mm

210 x 115mm

D

Dual Action Sander Backing Pads

Suitable for air and electric tools fitted with 5/16”UNFthread.Model No: AK289 AK290Diameter: 150mm 150mmSuitability: Stick-on Papers Hook & Loop Papers


C

180mm Air Angle Sander

Polished and well balanced aluminium body with twoside handle mounting positions. Precision made bevelgears give quiet and smooth operation at speedssuitable for sanding. Trigger operated throttle control.Supplied with self-adhesive backing pad.

Pad Size: Ø180mmThread Size: 5/8”UNCFree Speed Loaded/Unloaded: 4500rpmAir Consumption: 7cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.0kg

GModel No. SA18/S

G

Ø180mm

Sander10mm Premier Air Belt Sander

Aluminium housing with articulated sanding arm.Features belt tracking control, heavy-duty nose rollerand one-handed trigger operation. Composite handlewith exhaust reduces chill and noise level. Suitable forsanding otherwise inaccessible areas such as arounddoor-shuts. Supplied with three belts. Replacementbelts readily available.

Belt Size: 10 x 330mmAir Consumption: 17cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.8kg

FModel No. New SA635

F

Dust-Free Dust-Free

Self-Contained Dust-Free

Premier

Premier Premier

Premier

Section 11 Dust-Free Vacuum Systems 499

DFS91 Series Dust-FreeSystem

Tough, composite bin and motor housing are suitablefor industrial/body shop applications. Fitted withmicrochip controlled electric and air supply circuitwhich monitor power/air to the power tool andautomatically activate the suction. The same microchipoverruns the suction by 10 seconds to clear the hosesof dust. Features vibration function that helps cleardust accumulated on the filter bag after use. Suppliedwith a combined air/vacuum hose to minimize trailinghoses. All DFS models require an independentpower/air supply. DFS models can be purchased withMA150AS Dust-Free Air Sander ('A' V ersions) orwithout ('B' Versions).Model No: DFS91A DFS91BMotor Power: 1000W 1000WPower Tool Capacity: 1200W 1200WSupply: 230V 230VDrum Size: 37ltr 37ltrHose Ø: 28mm 28mmWeight: 10.4kg 9.8kgOptional Vac Accessories: DFS/AK16 DFS/AK16Replacement Filter: 122.03241 122.03241Supplied with Air Tool: MA150AS No

C D-

Mobile Professional Dust-FreeSystem

Professional system for small and medium sizedgarage and body shops. Strong steel cabinet houses60litre 2000Watt vacuum unit and features integral airfilter regulator for a clean, dry supply for up to two airtools. Electronic control for two power tools up to2000Watt total is also included. Vacuum unit overrunsby ten seconds to clear hose of dust and debris andmotors are protected by heavy-duty filter system.Supplied with dispenser for 5, 6 and 8 holed sandingdiscs and combination air vacuum hose and springloaded hose carrier for clutter free use. Cabinet alsofeatures folding storage hooks and large work surface.Large, easy rolling wheels allow added workshopmobility even when the unit is fully loaded. Suppliedwith dust-free air sander MA150AS.

Motor Power: 2 x 1000WPower Tool Capacity: 2000WSupply: 230VDrum Size: 60ltrHose Ø: 28mmWeight (with Cabinet): 62kgOptional Vacuum Accessories: DFS/AK16Replacement Filter: 122/06830000Supplied with Air Tool: MA150AS

EModel No. DFS23A

Professional Dust-Free SystemsE

A B

Model No. SEE BELOW

C D

DFS Series Accessories & Consumables

Model No: Description:122/99.70.23 Dust Bag, Non-Sealable - DFS31 (Single)AK291 Dust Bag, Sealable (Pack of 5)DFS/AK2 Combination Hose for air toolsDFS/AK10 Flexible Tool AdaptorDFS/AK3 Vacuum Hose for electric toolsDFS/AK16 Accessory Kit allowing use as a regular vacuum cleaner (not included with machine)

Model No. SEE BELOW

DFS Air tool supply. DFS Electric power toolsupply.

Model No. Air Electric

DFS31A 1 OR 1

DFS31B 1 OR 1

DFS55 1 OR 1

DFS91A2 AND 0

1 AND 1

DFS91B2 AND 0

1 AND 1

DFS23A2 AND 0

1 AND 1

Note that the DFS23A, DFS91A and DFS91B are supplied with only one combined air/vacuum hose. Ifyou require to run two air tools it is necessary to purchase another DFS/AK2 Combined Hose. If yourequire to run an additional power tool it is necessaryto purchase a DFS/AK3 Vacuum Hose.

Modern automotive paints and fillers can produceclouds of lethal dust when sanded. If inhaled, theparticles can cause silicosis and other respiratoryproblems. Airborne particles can cause crosscontamination problems in the body shop. Fine wooddust is also a cause of serious bronchial problems. Inall cases dust creates a dirty and unsafe workingenvironment and it is the duty of the employer tominimize the risks posed to staff by this hazard.

Air/Electric Tool Combinations

DFS31 Series Dust-FreeSystem

Tough, composite bin and motor housing are suitablefor industrial/body shop applications. Fitted withmicrochip controlled electric and air supply circuitwhich monitors power/air to the power tool andautomatically activates the suction. The samemicrochip overruns the suction by 10 seconds to clearthe hoses of dust. Features vibration function thathelps clear dust accumulated on the filter bag afteruse. Supplied with a combined air/vacuum hose tominimize trailing hoses. All DFS models require anindependent power/air supply . DFS models can bepurchased with MA150AS Dust-Free Air Sander ('A'Versions) or without ('B' Versions).Model No: DFS31A DFS31BMotor Power: 1000W 1000WPower Tool Capacity: 1200W 1200WSupply: 230V 230VDrum Size: 16ltr 16ltrHose Ø: 28mm 28mmWeight: 7.4kg 6.8kgOptional Vac Accessories: DFS/AK16 DFS/AK16Replacement Filter: 122.00124 122.00124Supplied with Air Tool : MA150AS No

A B-Model No. SEE BELOW

On DFS23A powerfulsuction is generated fromtwo 1000W att motors,protected by large capacityindustrial filter.

Combination Dust-Free/Wet & DryVacuum System Air/Electric 55ltr

Manufactured from tough composite material suitablefor industrial and body shop use. Microchip controlledelectric and air supply circuit, which monitors power/airto the power tool and automatically activates thesuction. The same microchip overruns the suction by10 seconds to clear the hose of dust. Supplied withvacuum hose and accessory kit for use as a standardwet and dry vacuum. All DFS models require anindependent power/air supply.Motor Power: 1200WPower Tool Capacity: 2000WSupply: 230VDrum Size: 55ltrHose Ø: Ø10-35mm AdaptorWeight: 16kgReplacement Filters:Cartridge Filter: DFS55.02-42Fine Particle Filter: DFS55.04Dust Collection Bag: DFS55.05-18

FModel No. New DFS55

F

Section 12Air Power Tools501 Air Impact Wrenches508 Air Ratchet Wrenches511 Impact Sockets, Adaptors & Extensions518 Air Drills & Screwdrivers520 Air Die Grinders & Engravers522 Air Nibblers & Shears523 Air Cut-Off Tools & Tyre Buffing Tools524 Air Hammers & Scalers526 Air Saws527 Air Riveters528 Air Angle Grinders529 Air Sanders & Polishers534 Air Blow Guns535 Air Nailers/Staplers536 Air Line Couplings539 Filters/Regulators/Lubricators542 Fast Fit Air Supply System544 Retractable Air Hose Reels & Air Hoses547 Air Hose Accessories

Section 12 Air Impact Wrenches 501

Premier Range

3/8”Sq Drive Butterfly AirImpact Wrench

Fingertip forward/reverse throttle control. Fitted withrocking-dog hammer, nine-position air/torque controland Z-swivel air inlet. One-handed operation andcompact size make this tool especially suitable forengine bay work.Drive: 3/8”SqWorking/Maximum Torque: 105/130lb.ftUltimate Torque: 135lb.ftAir Consumption: 4.5cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.9kg

AModel No. SA91

Air Tool Product Ranges

With so many air tools in our range we have tried tomake it easier to find product by categorising them byquality level. Read on for more information.

Generation Range

Sealey’s Generation or G3 series of air tools representssome of the best design innovations in air tools ofrecent date. The tools feature contoured, soft-griphandles and housings which help reduce the effects ofvibration and chill - major contributors to circulatory andnerve problems such as white finger . The tools alsoinclude exhaust systems designed to reduce noiselevels by baffling the noise or directing it away from theoperator’s environment. Most of the tools includeintegral and adjustable air control valves for precisecontrol of output. The air wrenches are, pound forpound, amongst the most powerful machines we haveseen in the market and the materials andmanufacturing techniques used in the production of allthe G3 series will ensure long and reliable service.

A

3/8”Sq Drive Air Impact Wrench

Pistol type wrench with rocking-dog hammer andhardened anvil assembly . Fitted with four-positionair/torque control and push-through reverse control.Compact and lightweight tool suitable for engine bay work.

Drive: 3/8”SqWorking/Maximum Torque: 105/130lb.ftUltimate Torque: 135lb.ftAir Consumption: 5.5cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.2kg

BModel No. SA912

B

HfofsbujpoBjsUppmt

Workshop Range

Traditional designs and proven workshop reliabilitydefine our Workshop range. These tools represent thevery best value in everyday air tools yet are supportedby our extensive after-sales operation in exactly thesame way as our high-end Premier range.

STANDARD HAMMERCommonly referred to as ‘rocking-dog’ hammer . Combines simplicity of construction with high level ofpower output. Includes single hammer weightcounterbalanced with hammer dog. Ideal forprice-competitive workshop power tools.

3/8”Drive

StandardHammer

StandardHammer

PIN CLUTCHTorque delivery of a pin clutch impact wrench issteady and smooth. A pin clutch impact wrench has agreater life expectancy than either rocking-dog or twinhammer type wrenches and generally has longerservice intervals. The clutch design also provides aslight advantage in reducing vibration and noiselevels. Pin clutch wrenches are recommended forindustrial as well as tyre and garage applications.

In order to clarify the torque characteristics of thesetools, we quote three figures:

WORKING AND MAXIMUM TORQUEThe working and maximum torque figures are thosedeveloped by tightening a bolt.

TWIN HAMMERTwice the number of hammers, twice the hammerweight and therefore twice the energy per blow. Fastdelivery of raw power with the bullet-proof reliabilityof a standard hammer mechanism. Ideal for heavyhitting power in the tyre-shop and workshop.

Our range of Premier air tools offers the very best inperformance and price. We specify the very highestquality components and manufacturing designs toensure a long and durable working life and areconfident that these tools offer the best value around.Premier professional air tools are backed by a one-year warranty with a free-of-charge conditionaltwo-year warranty available.

Premier

ULTIMATE TORQUEThe ultimate torque is the highest bolt torque that thetool will undo within a reasonable time. It is not relatedto the torque to which the tool can tighten the bolt.

3/8”Drive

TORQUE TESTEDAll our impact tools are thoroughly tested during theinitial selection phase to ensure the power we quote isthe power you get. Power output curves for all ourimpact tools are constructed so we can properly ratethem for maximum, working and ultimate torque. W erecommend the use of an air filter , regulator andlubricator to protect the tools from dirt, rust and damage.

3/8”Sq Drive GenerationComposite Air Impact WrenchTwin Hammer

Combination of composite materials, alloyed metalsand twin hammer design result in a lightweight, durableand powerful air impact wrench. Soft-grip handle withdownward facing exhaust make this wrenchcomfortable on the hands and ears and limits thecirculation of brake dust on wheel applications. Fingertip control of power and direction via lever on rear ofwrench. Suitable for professional garage use.


C

Model No. New GSA6000

C 3/8”DriveHfofsbujpoBjs

Uppmt

TwinHammer Composite

Section 12 Air Impact Wrenches502


Fitted with rocking-dog hammer and hardened impactanvil. Suitable for general garage use. Features four-position adjustable air/torque control andreversible action.

Drive: 1/2”SqWorking/Maximum Torque: 230/270lb.ftUltimate Torque: 420lb.ftAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.2kg

Model No. SA2

1/2”Drive

StandardHammer


Superior quality wrench suitable for garage and tyreshop use. Fitted with rocking-dog hammer mechanismwith hardened anvil and cage. Features four-positionadjustable air/torque control and reversible action.


BModel No. SA3/S

B

1/2”Drive

StandardHammer

1/2”Sq Drive GenerationAir Impact Wrench

Third Generation rocking-dog impact wrench. Suitablefor garage, tyre shop and workshop applications.Handle exhaust reduces noise output and contouredsoft-grip handle gives added comfort and control.Features three-position adjustable air/torque controland reversible action.Drive: 1/2”SqWorking/Maximum Torque: 295/325lb.ftUltimate Torque: 450lb.ftAir Consumption: 5.6cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.2kg

CModel No. GSA01

C HfofsbujpoBjsUppmt

1/2”Drive

StandardHammer

A

A

1/2”Sq Drive Premier Air ImpactWrench Pin Clutch

Fitted with power-pin type clutch giving up to 50%better performance than standard rocking-dog.Suitable for heavy garage and tyre shop use. Featuresfour-position adjustable air/torque control andreversible action plus spring balancer anchorage point.


DModel No. SA5/S

1/2”Sq Drive Premier Air ImpactWrench Pin Clutch

Pin clutch provides reliable performance. Freespinning air motor includes quality bearings andcarefully finished components to ensure smoothrunning and maximum power. Simple forward/reversemechanism with four-position air regulator. Suitable forheavy tyre shop use.


EModel No. SA601

E

PinClutch

1/2”Drive

F

PinClutch

1/2”Drive

D

CompositePin

Clutch

1/2”Drive

1/2”Sq Drive Premier CompositeAir Impact Wrench Pin Clutch

Composite casing with soft-grip makes the tool lighter,easier to handle and helps reduce vibration and chill.Handle exhaust reduces noise level. Pin clutch designgives the wrench a high torque output making itsuitable for jobs that would normally require a 3/4”impact wrench. Dial type power and direction controlon rear of wrench. Suitable for heavy tyre shop use.

Drive: 1/2”SqWorking/Maximum Torque: 700/800lb.ftUltimate Torque: 950lb.ftAir Consumption: 13cfmOperating Pressure: 90psiAir Inlet Size: 1/4“BSPWeight: 2.1kg

FModel No. SA6001

Premier Premier Premier

Magnetic Impact ToolTidies

Heavy-duty magnetic tool brackets with powerfulmagnets. W all mountable to allow for a morepermanent fixing with higher weight capacity . Bothsuitable for storing an impact wrench when not in use.Model No. MIT also features storage points for socketsand leader/air hose.Model No: Dimensions: Maximum

(H x W) Capacity:MIT 355 x 134mm 15kgMMIT 100 x 105mm 9kg


F-

1/2”Sq Drive GenerationAir Impact Wrench Twin Hammer

Third Generation twin hammer impact wrench.Suitable for garage, tyre shop and workshopapplications. Handle exhaust reduces noise outputand contoured soft-grip handle gives added comfortand control. Features three-position adjustableair/torque control and reversible action.


AModel No. GSA02

1/2”Sq Drive Premier Air ImpactWrench Twin Hammer

Powerful 1/2”Sq drive impact wrench with twin hammermechanism for increased torque. Air motor featuresquality bearings, steel end plates and carefully finishedcomponents to ensure smooth running and maximumpower. Combination forward/reverse and speedselector. Suitable for heavy tyre shop use.


CModel No. SA602

1/2”Sq Drive Premier CompositeAir Impact Wrench Twin Hammer

New twin hammer design gives the wrench a hightorque output making it suitable for jobs that wouldnormally require a 3/4” impact wrench. Features twistcontrol at back of tool for simple choice of speed anddirection. Composite casing with soft-grip makes thetool lighter, easier to handle and helps reduce vibrationand chill. Handle exhaust reduces noise level. Suitablefor heavy tyre shop use.


DModel No. SA6002

TwinHammer

1/2”Drive

HfofsbujpoBjsUppmt

C

D

TwinHammer

1/2”Drive

TwinHammer

A

1/2”Drive

Composite

E

1/2”Sq Drive Limited TorquePremier Air Impact WrenchPin Clutch

Innovative pin clutch design limits output torquepreventing over-tightening, which can result inwheel/wheel fixings damage. However full torque isstill transmitted in reverse direction for rapid fixingremoval. Limited torque, to 75lb.ft maximum forprofessional installation of wheels, allowing finaltightening of nuts with a calibrated torque wrench tomanufacturers specification. Anodised fixings easilyidentifies as limited torque wrench when amongstother models. Ideal for professional tyre shops.Drive: 1/2”SqMaximum Torque: 75lb.ftUltimate Torque: 500lb.ftAir Consumption: 5cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.2kg

G

Model No. New SA6035

F




B


B

G

TwinHammer

HfofsbujpoBjsUppmt

1/2”Drive

E F

EF

PinClutch Limited Torque


Premier

Premier Premier

Composite

1/2”Drive

AAir Tool Kit Specifications

Air tool kits of fer the most economic way to buy airtools. All of our air kits use common tools.Specifications of the tools are listed below . See kitdescription for details of socketry.

B

3pc Air Tool Kit with Accessories

1/2”Sq drive air impact wrench, 1/2”Sq drive air ratchetwrench and 10mm reversible air drill in compositecarry-case. Includes seven 1/2”Sq drive W allDrive®

Chrome Vanadium impact sockets and in-line air oiler.Suitable for workshop and body shop applications.Contents:Impact Wrench: SA2 - 1/2”Sq DriveAir Ratchet Wrench: SA21/S - 1/2”Sq DriveReversible Air Drill: SA24 - 10mmSockets: 9, 10, 11, 13, 14, 17, 19mmTotal Weight: 6.5kg

C

C

Model No. SA2003KIT

D

Drive: 1/2”SqWorking/Maximum Torque: 230/270lb.ftUltimate Torque: 420lb.ftAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSP

Model No. SA2

Drive: 1/2”SqMaximum Torque: 50lb.ftAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSP

Model No. SA21/S

Chuck Size: 10mmFree Speed: 1800rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSP

Model No. SA24

Chisel Shank Size: .401” Parker TaperSpeed: 4500bpmStroke: 32mmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSP

Model No. SA12/S

Chuck Size: Ø6mmFree Speed: 22000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSP

Model No. SA671

1/2”Drive

1/2”Drive

1/2”Drive

1/2”Drive

1/2”Sq Drive Air Impact WrenchKit with Accessories

Kit of tools comprising SA2 rocking-dog air impactwrench, 125mm extension bar and ten DuoMetric ®

impact quality sockets covering fifteen sizes. Kit alsoincludes bottle of air tool oil. Supplied in carry-case.

Contents:Impact Wrench: SA2 - 1/2”Sq DriveSockets: 9, 10, 11, 13, 14, 17, 19, 22, 24, 27mmDuoMetric® Coverage:7/16”, 3/4”, 7/8”, 15/16”, 1-1/16”Total Weight: 4.2kg

AModel No. SA2/TS


Comprises 1/2”Sq drive air impact wrench, 1/2”Sqdrive air ratchet wrench, ten 1/2”Sq drive W allDrive®

Chrome Vanadium impact sockets, in-line air oiler, airtool oil and a hex key, all in a carry-case. Suitable forworkshop and body shop applications. Contents:Impact Wrench: SA2 - 1/2”Sq DriveAir Ratchet Wrench: SA21/S - 1/2”Sq DriveSockets: 9, 10, 11, 13, 14, 17, 19, 22, 24, 27mmTotal Weight: 5.5kg

BModel No. SA2002KIT


Comprehensive air tool kit containing, medium strokeair hammer, air die grinder , 1/2”Sq drive air impactwrench and 1/2”Sq drive air ratchet wrench. Includes aselection of sockets, extension bars, grinding points,chisels and many accessories. Suitable for workshopand body shop applications. Supplied in carry-case.

Contents:Impact Wrench: SA2 - 1/2”Sq DriveAir Ratchet Wrench: SA21/S - 1/2”Sq DriveMedium Stroke Air Hammer: SA12/SDie Grinder : SA671Sockets: 10, 11, 13, 14, 15, 17, 19, 22, 24, 27mmTotal Weight: 7.9kg

DModel No. SA2004KIT

Section 12 Air Tool Kits504

E

TwinHammer

Composite

3/4”Drive

A

StandardHammer

C

PinClutch

B

PinClutch

F

TwinHammer

3/4”Sq Drive Premier Heavy-DutyAir Impact Wrench Pin Clutch

Fitted with smooth performing, power-pin clutch.Suitable for heavy garage and tyre shop use. Featuresfour-position adjustable air/torque control andreversible action plus spring balance anchorage point.


BModel No. SA59

3/4”Drive

3/4”Drive

3/4”Drive

3/4”Drive

3/4”Sq Drive Heavy-Duty AirImpact Wrench

Suitable for heavy garage and tyre shop use. Fittedwith rocking-dog hammer mechanism with hardenedanvil and cage. Features four-position adjustableair/torque control and reversible action. Polishedaluminium housing with textured grip.


AModel No. SA4

3/4”Sq Drive Premier Super-DutyAir Impact Wrench Pin Clutch

Pin clutch design gives smooth and reliableperformance. Features four-position twist dial locatedat back of unit. Handle exhaust reduces noise level.Soft-grip handle to help reduce the effects of chill andvibration. Suitable for heavy garage and workshop use.


CModel No. SA6

3/4”Sq Drive PremierAir Impact WrenchTwin Hammer

Twin hammer mechanism utilizes oversized hammersand specially strengthened hammer cage to pull evenmore torque out of the precision air motor . Precisionmade components fit closely to reduce air leakage andmaximize power. Flip reverse control on the rear of thetool with four-position air regulator on the handle base.Suitable for heavy tyre shop use.


F

Model No. SA604

3/4”Sq Drive PremierComposite Mini Air ImpactWrench Twin Hammer

Lightweight handling and heavyweight power - half theweight of traditional style 3/4”Sq drive air impact wrenches.Features twist control at back of tool for simple choice ofspeed and direction. Composite casing with soft-griphandle makes tool lighter , easier to handle and helpsreduce vibration and chill. Handle exhaust reduces noiselevel. Powerful twin hammer mechanism gives high torqueoutput suitable for professional heavy tyre shop use.


E

Model No. SA6003




D


D

TwinHammer Composite

3/4”Drive

HfofsbujpoBjsUppmt


Premier Premier

PremierPremier

1”Sq Drive Air Impact Pistol Wrench Pin Clutch

Pin clutch mechanism provides smooth operation reducing vibration, whilst stillcreating a high torque output. Control direction and power via 4-position leveradjustment on rear of wrench. Supplied with side handle for added control. Suitablefor commercial and agricultural vehicle use.Drive: 1”SqWorking/Maximum Torque: 1000/1200lb.ftUltimate Torque: 1500lb.ftAir Consumption: 15cfmOperating Pressure: 90psiAir Inlet Size: 3/8”BSPWeight: 5.6kg

CModel No. New SA297

1”Sq Drive Premier Heavy-Duty Air Impact WrenchLong Anvil

Suitable for heavy commercial tyre shop, fleet and workshop use. Featuresair/torque device, to control power output, and reverse action. Long pattern anvilgets into deeply dished wheels. Supplied with side handle.Drive: 1”SqWorking/Maximum Torque: 1200/1350lb.ftUltimate Torque: 1600lb.ftAir Consumption: 21cfmOperating Pressure: 90psiAir Inlet Size: 1/2”BSPWeight: 14.2kg

BModel No. SA291

1”Sq Drive Long Anvil Straight Air Impact Wrench

Suitable for commercial and agricultural vehicle use. Long anvil and straightconfiguration with rocking-dog hammer for applications with restricted access. Fittedwith reverse action. Supplied with side handle.Drive: 1”SqWorking/Maximum Torque: 1170/1460lb.ftUltimate Torque: 1520lb.ftAir Consumption: 15cfmOperating Pressure: 90psiAir Inlet Size: 1/2”BSPWeight: 13.5kg

AModel No. SA29/S

A

StandardHammer

F

1”Drive

Heavy-Duty Coupling Bodies & Adaptors

Compatible only with heavy-duty coupling adaptors. Free airflow rate at100psi(7bar): 100-120cfm (2832-3398ltr/min).Model No: Type: Thread Size: Pack Qty:

AC22 Female Thread 1/2”BSP 1pcAC23 Male Thread 1/2”BSPT 1pcAC24 Female Thread 3/8”BSP 2pcAC25 Male Thread 3/8”BSPT 2pcAC26 Male Thread 1/2”BSPT 2pc


B

StandardHammer

1”Drive

1”Sq Drive Premier Super-Duty Air Impact PistolWrench Pin Clutch

Super-duty 1”Sq drive pistol grip air wrench suitable for commercial and agriculturalvehicle use. Pin clutch mechanism gives high power-to-weight ratio. Four-positiontorque control with reverse. Supplied with side handle and spring balance hoop.Drive: 1”SqWorking/Maximum Torque: 1400/1600lb.ftUltimate Torque: 1800lb.ftAir Consumption: 12cfmOperating Pressure: 90psiAir Inlet Size: 1/2”BSPWeight: 10.3kg

DModel No. SA682

D

PinClutch

1”Drive

PinClutch

1”Drive

C

E

1”Sq Drive Premier Super-Duty Air Impact PistolWrench Long Anvil Pin Clutch

Super-duty 1”Sq drive pistol grip air impact wrench suitable for commercial andagricultural vehicle use. Pin clutch mechanism gives high power-to-weight ratio.Fitted with long anvil for areas with restricted access. Four-position torque controlwith reverse. Supplied with side handle and spring balance hoop.Drive: 1”SqWorking/Maximum Torque: 1400/1600lb.ftUltimate Torque: 1800lb.ftAir Consumption: 12cfmOperating Pressure: 90psiAir Inlet Size: 1/2”BSPWeight: 11.1kg

EModel No. New SA684

1

2

4

3

1

2344

PinClutch

1”Drive

Section 12 Air Impact Wrenches506

Premier

Premier

Premier

1”Sq Drive Premier Super-Duty Air Impact WrenchPin Clutch

Super-duty 1”Sq drive air tool suitable for commercial and agricultural vehicle use. Pin clutch mechanism gives high power-to-weight ratio. Straight pattern and top sideexhaust allow wide variety of applications. Supplied with side handle and springbalance hoop.

Drive: 1”SqWorking/Maximum Torque: 1400/1600lb.ftUltimate Torque: 1800lb.ftAir Consumption: 42cfmOperating Pressure: 90psiAir Inlet Size: 1/2”BSPWeight: 10.5kg

AModel No. SA680

A

PinClutch

B

PinClutch

1”Drive

1”Drive

1”Sq Drive Composite Premier Air Impact WrenchTwin Hammer

Lightweight handling and heavyweight power - half the weight of traditional style1”Sq drive air impact wrenches. Features twist control at back of tool for simplechoice of speed and direction. Composite housing with soft-grip and side handlehelps reduce vibration and chill. Handle exhaust reduces noise level. Powerful twinhammer mechanism gives high torque output suitable for commercial andagricultural use.


CModel No. SA6005

C

TwinHammer

Composite

1”Drive

Weighs Just5.1kg

1”Sq Drive Composite/Magnesium PremierAir Impact Wrench Twin Hammer

Lightweight wrench with heavyweight power - 1/2 the weight of traditional style 1”Sqdrive air impact wrenches. Manufactured from a composite and magnesiumhousing for ultimate performance. Soft grip covered handles help reduce vibrationand chill. Heavy hitting twin hammer mechanism gives extremely high torque outputsuitable for commercial and agricultural use. Lever and twist controls for simplechoice of speed and direction. Designed for the professional workshops.

Drive: 1”SqWorking/Maximum Torque: 1800-2000lb.ftUltimate Torque: 2100lb.ftAir Consumption: 14cfmOperating Pressure: 90psiAir Inlet Size: 1/2”BSPWeight: 7.6kg

DModel No. New SA685

D

TwinHammer

Composite/Magnesium

1”Drive

Weighs Just7.6kg

1”Sq Drive Premier Super-Duty Air Impact WrenchLong Anvil Pin Clutch

Super-duty 1”Sq drive air tool suitable for commercial and agricultural vehicle use.Pin clutch mechanism gives high power-to-weight ratio. Long anvil, straight patternand top side exhaust allow use on wheels with deep dish. Supplied with side handleand spring balance hoop.


BModel No. SA681


Premier

PremierPremier

Premier

Generation Compact AirRatchet Wrenches

Third Generation twin pawl compact air ratchetwrenches. Feature packed, with contoured handle toinsulate user from chill and vibration. Finger operatedtrigger and textured grip allows added control - even withgreasy hands. Low noise exhaust adjusts 360° - keepingairflow from operator. 4-Position air regulator integratedinto air inlet adjusts torque output. Ideal for working inengine bays or other places with restricted access.

Model No: GSA634 GSA635Drive: 1/4”Sq 3/8”SqMaximum Torque: 50lb.ft 50lb.ftAir Consumption: 5cfm 5cfmOperating Pressure: 90psi 90psiAir Inlet Size: 1/4”BSP 1/4”BSPLength: 215mm 215mmWeight: 0.75kg 0.75kg

E F-Model No. SEE BELOW

Premier Super StubbyAir Ratchet Wrenches

Ultra-compact air ratchet wrenches fit in the palm ofthe hand. Perfect for working around tightly-packedengine compartments. Ratchet yoke designed andmanufactured to provide additional strength. Rearexhaust with baffle reduces noise.

Model No: SA632 SA633Drive: 1/4”Sq 3/8”SqMaximum Torque: 25lb.ft 25lb.ftAir Consumption: 2.4cfm 2.4cfmOperating Pressure: 90psi 90psiAir Inlet Size: 1/4”BSP 1/4”BSPLength: 140mm 140mmWeight: 0.5kg 0.5kg

Model No. SEE BELOW

Premier Mini Air RatchetWrenches

Mini air wrenches suitable for applications wherespace is at a premium. Superb for engine bay workon cars, commercial vehicles, motorcycles andoutboards. Compact design utilizes high qualitybearings and rotor end plates for smooth power output.Rear exhaust with baffle reduces noise and oil spray.Fitted with protective rubber ratchet head boot.

Model No: SA630 SA631Drive: 1/4”Sq 3/8”SqMaximum Torque: 30lb.ft 30lb.ftAir Consumption: 5cfm 5cfmOperating Pressure: 90psi 90psiAir Inlet Size: 1/4”BSP 1/4”BSPLength: 175mm 175mmWeight: 0.5kg 0.5kg

Model No. SEE BELOW

Air Leader Hoses

600mm Rubber hose for use between air tool andsupply point. Avoids vibration damage to couplings.Supplied with tail piece and 1/4”BSP female union.

Model No: Length: Bore:AH2R 600mm 8mmAH2R/38 600mm 10mm


G

C D-

C D-

A B-

A B-

H I-

E F-C D-

C DE F

A B

HfofsbujpoBjsUppmt

Air Ratchet Wrenches

Air powered ratchet with hardened steel anvil andtwist-reverse mechanism. Trigger operated powercontrol. Suitable for use in the engine bay where thereis limited space for hand-operated ratchets.

Model No: SA20/S SA21/SDrive: 3/8”Sq 1/2”SqMaximum Torque: 50lb.ft 50lb.ftAir Consumption: 4cfm 4cfmOperating Pressure: 90psi 90psiAir Inlet Size: 1/4”BSP 1/4”BSPLength: 265mm 265mmWeight: 1.2kg 1.2kg

Model No. SEE BELOW

H I-

H I- H I

For our full range of Premier Line RatchetWrenches see pages 38 to 43.

1/4” & 3/8”Drive

1/4” & 3/8”Drive

3/8” & 1/2”Drive

1/4” & 3/8”Drive

J

Cordless Ratchet Wrench 14.4V3/8”Sq Drive

Powerful cordless ratchet wrench with hardened steelanvil and twist-reverse mechanism. Finger operatedtrigger incorporated in housing. Textured soft grip helpsreduce vibration. Features built-in LED work light foruse in low-light areas. Suitable for workshopapplications. Includes 14.4V Ni-Cd battery pack and 1hour mains charger. For full specification see page 559.

Model No. New CP2144

J

Section 12 Air Ratchet Wrenches508

Premier Premier

3/8”Drive 14.4V

Compare the ratchet head casting of our SA607 -SA610 to that of a normal wrench and you will findthere are no scallops on the Premier tool. Thesescallops reduce manufacturing time but also reducethe strength of the head by as much as 20%.

The ratchet heads of the SA607 and SA608 include asmall grease fitting allowing grease to be introduceddirectly onto the drive shaft. This reduces friction andincreases the power and longevity of the tool.

Premier Super-Duty AirRatchet Wrenches

Feature packed air ratchet wrenches. Composite airmotor jackets reduce hand-chill and provide extra gripfor comfort and control. Unique design ratchet headsare stronger than traditional ratchet style - lowering riskof damage to the tools from over-torquing. Greasefitting on ratchet heads allows smoother operation andlonger working life.

Model No: SA607 SA608Drive: 3/8”Sq 1/2”SqMaximum Torque: 50lb.ft 50lb.ftAir Consumption: 4cfm 4cfmOperating Pressure: 90psi 90psiAir Inlet Size: 1/4”BSP 1/4”BSPLength: 265mm 265mmWeight: 1.2kg 1.2kg

NORMAL WRENCH SA607 - SA6104-Position Air Regulator.

360º Directional Exhaust.

Fingertip Trigger Control.

SA607SA608

A B-

A B-

A B-

C D-

E F-

E F-

C F-

Generation Air RatchetWrenches

Feature packed, Third Generation twin pawl air ratchetwrenches. Contoured handle insulates user from chilland vibration. Finger operated trigger and textured gripallows added control - even with greasy hands. Lownoise exhaust adjusts 360° - keeping air flow awayfrom operator. 4-Position air regulator integrated intoair inlet adjusts torque output.

Model No: GSA20 GSA21Drive: 3/8”Sq 1/2”SqMaximum Torque: 60lb.ft 60lb.ftAir Consumption: 4cfm 4cfmOperating Pressure: 90psi 90psiAir Inlet Size: 1/4”BSP 1/4”BSPLength: 280mm 280mmWeight: 1.2kg 1.2kg

Model No. SEE BELOW

A B-

A B-

A B D

C D-Model No. SEE BELOW

C

Premier Flexi-Head AirRatchet Wrenches

Innovative design flexible ratchet head allows 30°angle adjustment both directions. Ratchet yokedesigned and manufactured to provide additionalstrength, prolonging the working life. Reversible for usein either direction and trigger operated power control.Rear exhaust with baffle reduces noise level and oilspray. Suitable for use in the professional workshop.

Model No: SA609 SA610Drive: 3/8”Sq 1/2”SqMaximum Torque: 50lb.ft 50Ib.ftAir Consumption: 5cfm 5cfmOperating Pressure: 90psi 90psiAir Inlet Size: 1/4”BSPT 1/4”BSPTLength: 256mm 256mmWeight: 0.9kg 0.9kg


E F

E F-

E F-C D-

3/8” & 1/2”Drive

3/8” & 1/2”Drive

3/8” & 1/2”Drive

Premier

Flexi-Head

Section 12 Air Ratchet Wrenches 509

HfofsbujpoBjsUppmt

Premier

Air Ratchet Wrench Kit 3/8”Sq Drive

A complete air ratchet kit including 3/8”Sq drive air ratchet, selection of sockets,extension bars and driver bits. Supplied in storage case.

Contents: Air Ratchet Wrench; Model No. SA20/S - 3/8”Sq Drive, Impact Sockets; 10, 1 1, 12, 13, 14, 17, 19mm, DuoMetric ® Coverage; 7/16”, 15/32”, 3/4”,Extension Bar; 75mm, Bit Extension Bar; 75mm, Driver Bits; Slotted - 5.5, 7mm, Phillips - #2, Universal Joint, Oil ContainerDrive: 3/8”SqMaximum Torque: 50lb.ftAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.2kg

AModel No. SA20-KIT

Generation Air Ratchet Wrench Kit 3/8”Sq Drive

Comprehensive air ratchet kit. Includes GSA20 Third Generation ratchet wrenchfeaturing contoured soft-grip handle, 4-position air regulator and 360° directionalexhaust. Includes a selection of impact sockets, extension bars and driver bits.Supplied in a storage case.

Contents: Air Ratchet Wrench; Model No. GSA20 - 3/8”Sq Drive, Impact Sockets; 9, 10, 11, 13, 14, 17, 19mm, DuoMetric ® Coverage; 7/16”, 3/4”, Extension Bar; 75mm Bit Holder; 75mm, Driver Bits; Slotted - 5.5mm, Phillips - #2, #3, Universal Joint, Oil ContainerDrive: 3/8”SqMaximum Torque: 60lb.ftAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.2kg

BModel No. GSA20KIT

B

Air Ratchet Wrench Kit 1/2”Sq Drive

A complete air ratchet kit including 1/2”Sq drive air ratchet, selection of sockets,extension bars and driver bits. Supplied in storage case.

Contents: Air Ratchet W rench; Model No. SA21/S - 1/2”Sq Drive, ImpactSockets; 9, 10, 1 1, 13, 14, 17, 19mm, DuoMetric ® Coverage; 7/16”, 3/4”,Extension Bar; 75mm, Bit Extension Bar; 75mm, Driver Bits; Slotted - 5.5, 7mm, Phillips - #2, Universal Joint, Oil ContainerDrive: 1/2”SqMaximum Torque: 50lb.ftAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.2kg

CModel No. SA21-KIT

C

Generation Air Ratchet Wrench Kit 1/2”Sq Drive

Comprehensive air ratchet kit. Includes GSA21 Third Generation ratchet wrenchfeaturing contoured soft-grip handle, 4-position air regulator and 360° directionalexhaust. Includes a selection of impact sockets, extension bars and driver bits.Supplied in a storage case.

Contents: Air Ratchet W rench; Model No. GSA21 - 1/2”Sq Drive, ImpactSockets; 9, 10, 1 1, 13, 14, 17, 19mm, DuoMetric ® Coverage; 7/16”, 3/4”, Extension Bar; 75mm, Bit Holder; 75mm, Driver Bits; Slotted - 5.5mm, Phillips - #2, #3, Universal Joint, Oil ContainerDrive: 1/2”SqMaximum Torque: 60lb.ftAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.2kg

DModel No. GSA21KIT

D

A

3/8”Drive

3/8”Drive

HfofsbujpoBjsUppmt

1/2”Drive

1/2”Drive

HfofsbujpoBjsUppmt

Section 12 Air Ratchet Wrench Kits510

Individual Impact Sockets

Drop-forged, six-point, W allDrive® impact sockets.Hardened and tempered for strength and withphosphate finish for greater corrosion resistance.Chrome Vanadium steel used on 3/8” and 1/2”Sq drive.Chrome Molybdenum steel used on 3/4” and 1”Sq drive.

Model No. SEE TABLES

Individual Impact Sockets3/8”Sq Drive

Model No: Size: Depth:IS3808 8mm StandardIS3810 10mm StandardIS3811 11mm StandardIS3812 12mm StandardIS3813 13mm StandardIS3814 14mm StandardIS3815 15mm StandardIS3816 16mm StandardIS3817 17mm StandardIS3818 18mm StandardIS3819 19mm StandardIS3808D 8mm DeepIS3810D 10mm DeepIS3811D 11mm DeepIS3812D 12mm DeepIS3813D 13mm DeepIS3814D 14mm DeepIS3815D 15mm DeepIS3816D 16mm DeepIS3817D 17mm DeepIS3818D 18mm DeepIS3819D 19mm Deep



Model No: Size: Depth:IS1210 10mm StandardIS1211 11mm StandardIS1212 12mm StandardIS1213 13mm StandardIS1214 14mm StandardIS1215 15mm StandardIS1216 16mm StandardIS1217 17mm StandardIS1218 18mm StandardIS1219 19mm StandardIS1220 20mm StandardIS1221 21mm StandardIS1222 22mm StandardIS1224 24mm StandardIS1227 27mm StandardIS1230 30mm StandardIS1232 32mm StandardIS1210D 10mm DeepIS1211D 11mm DeepIS1212D 12mm DeepIS1213D 13mm DeepIS1214D 14mm DeepIS1215D 15mm DeepIS1216D 16mm DeepIS1217D 17mm DeepIS1218D 18mm DeepIS1219D 19mm DeepIS1220D 20mm DeepIS1221D 21mm DeepIS1222D 22mm DeepIS1224D 24mm DeepIS1227D 27mm DeepIS1230D 30mm DeepIS1232D 32mm Deep


Individual Impact Sockets1”Sq Drive

Model No: Size: Depth:IS124 24mm StandardIS127 27mm StandardIS130 30mm StandardIS132 32mm StandardIS133 33mm StandardIS134 34mm StandardIS135 35mm StandardIS136 36mm StandardIS141 41mm StandardIS146 46mm StandardIS150 50mm StandardIS152 52mm StandardIS155 55mm StandardIS160 60mm StandardIS165 65mm StandardIS170 70mm StandardIS175 75mm StandardIS180 80mm StandardIS124D 24mm DeepIS127D 27mm DeepIS130D 30mm DeepIS132D 32mm DeepIS133D 33mm DeepIS134D 34mm DeepIS135D 35mm DeepIS136D 36mm DeepIS141D 41mm DeepIS146D 46mm DeepIS150D 50mm DeepIS152D 52mm DeepIS155D 55mm DeepIS160D 60mm DeepIS165D 65mm DeepIS170D 70mm DeepIS175D 75mm DeepIS180D 80mm Deep



Model No: Size: Depth:IS3424 24mm StandardIS3427 27mm StandardIS3430 30mm StandardIS3432 32mm StandardIS3433 33mm StandardIS3434 34mm StandardIS3435 35mm StandardIS3436 36mm StandardIS3438 38mm StandardIS3441 41mm StandardIS3424D 24mm DeepIS3427D 27mm DeepIS3430D 30mm DeepIS3432D 32mm DeepIS3433D 33mm DeepIS3434D 34mm DeepIS3435D 35mm DeepIS3436D 36mm DeepIS3438D 38mm DeepIS3441D 41mm Deep


A D-

A

B C

Warning! Never use regular sockets with an impacttool. These sockets are brittle and are liable to shatter causing injury.

D

3/8”Drive

1/2”Drive

3/4”Drive

1”Drive

Individual Alloy Wheel ImpactSockets 1/2”Sq Drive

Chrome Molybdenum sockets, hardened, temperedand anodised for corrosion resistance. Suitable for usewith impact tools. Six-point socket is externally andinternally sleeved to prevent damage to alloy wheelsand nuts. Colour coding assists ease of size selection.Model No: Size:

SX03015 New 15mmSX03017 17mmSX03019 19mmSX03021 21mmSX03022 22mmSX03023 23mmSX03024 24mmSX03027 27mm


E

21 3 4 5 6 7 8

3

12

45

78

6

Section 12 Impact Sockets 511

1/2”Drive

E

Impact Socket Sets

Our Premier range of high quality impact sockets has been consolidated to form one of the most completeranges available to the automotive technician. All sets use the DuoMetric® selection principle where no Imperialsize socket is included where there is a Metric equivalent. This method gives maximum coverage of sizes withthe minimum number of sockets.

All sockets are WallDrive® and allow transfer of up to 30% more torque to the fixing before the risk of damage tothe corners of the hexagon. This also permits damaged fixings to be easily tackled.

All sockets are manufactured from the very highest quality materials with manganese phosphate,electrodeposited finish for corrosion resistance. Chrome Vanadium steel used on 3/8” and 1/2”Sq drive. ChromeMolybdenum steel used on 3/4” and 1”Sq drive.

All models are supplied in storage case or tray and are suitable for usewith air impact guns and air operated ratchet wrenches.

Model No. SEE BELOW

A M-

Model No: AK683Quantity of Sockets: 12Type: 3/8”Sq Drive DeepSize Coverage: 8, 10, 11, 13, 14, 16, 17, 19mm, 5/16”, 3/8”, 7/16”, 1/2”,9/16”, 5/8” 11/16”, 3/4”

Model No: AK682Quantity of Sockets: 12Type: 3/8”Sq Drive StandardSize Coverage: 8, 10, 11, 13, 14, 16, 17, 19mm, 5/16”, 3/8”, 7/16”, 1/2”,9/16”, 5/8” 11/16”, 3/4”

3/8”Sq Drive Impact Socket Sets

A B

Model No. SEE BELOW

A B-

Model No: AK58/11MQuantity of Sockets: 10Type: 1/2”Sq Drive DeepSize Coverage: 9, 10, 11, 13, 14, 17, 19, 22, 24, 27mm, 7/16”, 3/4”, 7/8”,15/16”, 1-1/16”

F

Model No: AK56/11MQuantity of Sockets: 10Type: 1/2”Sq Drive StandardSize Coverage: 9, 10, 11, 13, 14, 17, 19, 22, 24, 27mm, 7/16”, 3/4”, 7/8”,15/16”, 1-1/16”

C D


Model No. SEE BELOW

C F-

Model No: AK684Quantity of Sockets: 16Type: 1/2”Sq Drive StandardSize Coverage: 10, 1 1, 12, 13, 14, 17, 19, 21, 22, 24, 27mm, 7/16”,15/32”,1/2”, 9/16”, 5/8” 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1-1/16”

Model No: AK685Quantity of Sockets: 16Type: 1/2”Sq Drive Deep Size Coverage: 10, 11, 12, 13, 14, 17, 19, 21, 22, 24, 27mm, 7/16”,15/32”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1-1/16”

512 Section 12 Impact Socket Sets

3/8”Drive

3/8”Drive

Deep

1/2”Drive

1/2”Drive

Deep

1/2”Drive

1/2”Drive

Deep

Model No: AK80/9MQuantity of Sockets: 8Type: 3/4”Sq Drive DeepSize Coverage: 26, 27, 29, 30, 32, 35, 36, 38mm, 1-1/16”, 1-3/16”, 1-1/4”,1-3/8”, 1-1/2”

Metric: Imperial: Metric: Imperial:8mm 5/16” 24mm 15/16”

10mm 3/8” 25mm 1”11mm 7/16” 27mm 1-1/16”12mm 15/32” 28mm 1-1/8”13mm 1/2” 30mm 1-3/16”14mm 9/16” 32mm 1-1/4”15mm 19/32” 33mm 1-5/16”16mm 5/8” 35mm 1-3/8”17mm 11/16” 36mm 1-7/16”19mm 3/4” 38mm 1-1/2”20mm 25/32” 41mm 1-5/8”22mm 7/8”

K L

Model No: AK688Quantity of Sockets: 10Type: 1”Sq Drive StandardSize Coverage: 24, 27, 30, 32, 33, 36, 38, 41mm, 15/16”, 1”, 1-1/16”,1-1/8”, 1-1/4”, 1-5/16”, 1-1/2”

Model No: New AK888MQuantity of Sockets: 8Type: 1”Sq Drive DeepSize Coverage: 24, 27, 30, 32, 33, 34, 36, 41mm, 15/16”, 1-1/16”, 1-3/16”,1-1/4”, 1-5/16”, 1-7/16”, 1-5/8”

G H

MSocket Size Conversion Table


Model No. SEE BELOW

G J-

1”Sq Drive Impact Socket Sets


K M-

I J

Model No: AK686Quantity of Sockets: 13Type: 3/4”Sq Drive StandardSize Coverage: 22, 24, 27, 30, 32, 33, 34, 36, 38mm, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16” 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”

Model No: AK687Number of Sockets: 13Type: 3/4”Sq Drive DeepSize Coverage: 22, 24, 27, 30, 32, 33, 34, 36, 38mm, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”

Model No: AK77/9MQuantity of Sockets: 8Type: 3/4”Sq Drive StandardSize Coverage: 26, 27, 29, 30, 32, 35, 36, 38mm, 1-1/16”, 1-3/16”, 1-1/4”,1-3/8”, 1-1/2”

Model No: AK689Quantity of Sockets: 10Type: 1”Sq Drive DeepSize Coverage: 24, 27, 30, 32, 33, 36, 38, 41mm, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-5/16”, 1-1/2”

IMPORTANT SAFETY WARNING!Always wear eye or face protection when using these tools! Fora full range of goggles, visors, gloves and ear defenders, plusother safety equipment, see pages 707 to 717 of this catalogue.

Section 12 Impact Socket Sets 513

3/4”Drive

Deep

3/4”Drive

Deep

1”Drive

Deep

1”Drive

Deep

1”Drive

3/4”Drive

3/4”Drive

Impact Socket Set 1/2”Sq DriveWallDrive® - Metric 19pc

Standard depth WallDrive® sockets manufactured fromChrome V anadium steel with electrodepositedmanganese phosphate finish for added corrosionresistance. Set includes three extension bars, 3/4”Sqdrive adaptor and universal joint. All suitable for usewith impact tools and supplied in steel carry-case.Drive: 1/2”SqContents:Sockets; 10, 11, 12, 13, 14, 15, 16, 17, 18,19, 21, 22, 24, 27mm, Extension Bars; 50, 150, 250mm,Adaptor 1/2”Sq F x 3/4”Sq M, Universal Joint 1/2”Sq

CModel No. AK5619M

C

Impact Socket Set 1/2”Sq DriveWallDrive® - Metric 12pc

Nine standard depth WallDrive® sockets manufacturedfrom Chrome Vanadium steel with electro-depositionmanganese phosphate finish for added corrosionresistance. Three anodised colour coded ChromeMolybdenum sockets, each having a sleeve and aninsert to prevent damage to alloy wheels. All suitable foruse with impact tools and supplied in carry-case.Drive: 1/2”SqContents:Standard CrV Sockets; 10, 11, 13, 14, 17,19, 22, 24, 27mm, Alloy Wheel CrM Sockets; 17, 19,21mm

AModel No. AK5612M

A

DF

E

Impact Socket Set 1/2”Sq Drive Metric/Imperial56pc

Chrome Vanadium, drop-forged, six-point, WallDrive® impact sockets. Hardenedand tempered for strength and with electrodeposited manganese phosphate finishfor greater corrosion resistance. Ideal for use with air impact wrenches.Drive: 1/2”SqSockets:Metric: 11, 12, 13, 14, 16, 17, 19, 21, 22, 24mm (1 each Standard and Deep)Imperial: 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1” (1 each Standard and Deep)TRX-Star*: E12, E14, E16, E18, E20, E22, E24Extension Bars: 75, 125, 250mmWobble Bars: 75, 150, 200mmAdaptors: 1/2”F x 3/4”M, 1/2”F x 3/8”MUniversal Joint: 1/2”M x 1/2”F

GModel No. AK68156

G

MM & IMPMM & IMP

DeepDeep

Deep

Impact Socket & Wheel NutRemover 15pc 1/2”Sq Drive

Comprehensive impact socket set. Consists of threeChrome Molybdenum locking wheel nut removal sockets,ideal for busy fast fit operations. Three ChromeMolybdenum alloy wheel impact sockets, colour codedfor simple selection, feature protective sleeve to avoidany possible damage to alloy wheel. Nine hardenedand tempered Chrome Vanadium steel impact socketswith a phosphate finish for greater corrosion resistance.All impact sockets are W allDrive®, which allows atransfer of up to 30% more torque to the fixing. Suppliedin carry-case.Drive: 1/2”SqContents: Wheel Nut Removers; 18.5, 21.5, 26mm,Alloy Wheel Impact Sockets; 17, 19, 21mm, ImpactSockets; 10, 11, 13, 14, 17, 19, 22, 24, 27mm

BModel No. AK5615M

B

Impact Socket Set 1/2”Sq DriveDeep WallDrive® - Metric 15pc

Deep WallDrive® sockets manufactured from ChromeVanadium steel with electrodeposited manganesephosphate finish for added corrosion resistance. Setincludes extension bars and universal joint. All suitablefor use with impact tools and supplied in steel carry-case.Drive: 1/2”SqContents: Sockets; 10, 12, 13, 15, 16, 17, 18, 19, 21,22, 24, 27mm, Extension Bars; 125, 250mm, Universal Joint 1/2”Sq

DModel No. AK5815M

Impact Socket Set 3/8” & 1/2”SqDrive WallDrive® - DuoMetric® 32pc

Manufactured from Chrome Vanadium steel with anelectrodeposited manganese phosphate finish foradded corrosion resistance. W allDrive® socketsselected on DuoMetric® principle. Suitable for use withimpact air wrenches. Supplied in carry-case.Contents:3/8”Sq Drive Sockets: 8, 9, 10, 11, 12, 14, 15, 16, 17mm1/2”Sq Drive Sockets: 17, 19, 22, 30mm 1/2”, 9/16”, 11/16”, 13/16”, 1”, 1-1/8” 1/2”Sq Drive Deep Sockets: 13, 15, 17, 18, 19, 21,22, 24, 27, 30mmExtension Bars: 3/8” x 75mm, 1/2” x 75mmAdaptor: 1/2”F x 3/8”M

FModel No. AK681

Impact Socket Set 3/8” & 1/2”SqDrive WallDrive® - DuoMetric® 35pc

Drop-forged, Chrome V anadium steel six-pointWallDrive® sockets. Hardened, for corrosion resistance.Supplied in a convenient storage case.Contents:3/8”Sq Drive Sockets: 8, 10, 11, 12, 13, 15, 17mm3/8”, 1/2”, 9/16”, 11/16”1/2”Sq Drive Sockets:9, 10, 11, 12, 13, 14, 15, 17, 18, 21, 22, 24, 27, 30mm, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 1”Extension Bars: 3/8” x 75mm, 1/2” x 75mmDrive Adaptor: 1/2”F x 3/8”M

EModel No. AK56/35

Section 12 Impact Socket Sets514

1/2”Drive

1/2”Drive

1/2”Drive

1/2”Drive

1/2”Drive

3/8” & 1/2”Drive

3/8” & 1/2”Drive

E

Impact Flip Socket Set1/2”Sq Drive 3pc

Two sockets, four common wheel nut sizes and doublethe chance of the right socket loaded on your impactgun. Simply attach the 75mm extension bar and slipon one of the double ended impact sockets. Simpleand fast size change, pull socket off bar, flip 180°, put itback on. High quality Chrome Molybdenum impactsockets with heat treatment and anti-corrosion finish.

Drive: 1/2”SqSize: 17 x 19mm, 21 x 23mm

GModel No. SX270

G

Torque Stick & Alloy WheelImpact Socket Set 1/2”Sq Drive 8pc

Set includes alloy steel torque sticks and ChromeMolybdenum impact sockets, which are hardened,tempered and anodised for corrosion resistance. Bothare designed for use with air and electric impactwrenches and are colour coded for ease of selection.The torque sticks prevent over-torquing of wheel nutswhich causes distortion of wheels, drums and discswhich can produce brake pulsation. Torque sticks canbe used with any impact grade sockets and areespecially suitable for thin-walled sockets. Populartorque rates for most cars and light commercialvehicles. The impact sockets are sleeved to preventdamage to alloy wheels. Supplied in carry-case.

Drive: 1/2”SqTorque Sticks:Colour: Torque Rating:Yellow 80lb.ft(110Nm)Red 90lb.ft(120Nm)Blue 100lb.ft(135Nm)Orange 110lb.ft(150Nm)Impact Sockets:Colour: Size:Blue 17mmGold 19mmRed 21mmGreen 22mm

EModel No. AK2243

A

B

Alloy Wheel Impact SocketSets 1/2”Sq Drive 3pc

Chrome Molybdenum sockets, hardened, tempered andanodised for corrosion resistance. Suitable for use withimpact tools. Each 6-point socket is sleeved and has aninsert to prevent damage to alloy wheels and nuts.Colour coded socket assists ease of size selection.Comprises standard 17, 19 and 21mm sockets. SX031Dincludes spare PE sleeves. Supplied in storage case.Model No: Drive: Type:

SX031 1/2”Sq StandardSX031D 1/2”Sq Deep

Contents: 17, 19, 21mm

Model No. SEE BELOW

A B-

BA

Alloy Wheel Nut Socket Set1/2”Sq Drive 4pc

Chrome Molybdenum sockets, hardened, temperedand anodised for corrosion resistance. Suitable for usewith impact tools. Each 6-point socket is sleeved toprevent damage to alloy wheels and nuts. Colourcoding assists ease of selection. Includes standard 17,19 and 21mm sockets plus 27mm for Range Rover ,Land Rover and other 4x4 applications, plus spare PEsleeves and depth inserts. Supplied in storage case.

Drive: 1/2”SqContents: 17, 19, 21, 27mm

CModel No. SX030

C

Torque Stick Set 1/2”Sq Drive5pc

Alloy steel torque sticks designed for use with air andelectric impact wrenches. Prevents over-torquing ofwheel nuts which causes distortion of wheels, drumsand discs. Helps prevent brake pulsation. Can be usedwith any impact grade sockets and especially suitablefor thin-walled sockets. Fast, easy to use and costefficient. Ideal for fast-fit operations. Simple calibrationprocedure. Popular torque rates for most cars and lightcommercial vehicles. Supplied in storage case.

Colour: Drive: Torque Rating:Black 1/2”Sq 75lb.ft(100Nm)Yellow 1/2”Sq 80lb.ft(110Nm)Red 1/2”Sq 90lb.ft(120Nm)Blue 1/2”Sq 100lb.ft(135Nm)Orange 1/2”Sq 110lb.ft(150Nm)

DModel No. AK2242

D

Impact Wheel Nut/Removal FlipSocket Set 1/2”Sq Drive 4pc

Flip socket set featuring wheel nut socket one end andfluted socket the other for removing locking or roundedoff wheel nuts. Attach the 75mm extension bar and slipon one of the double-ended impact tools. Simple andfast interchange, pull socket of f bar, flip 180°, put itback on. High quality Chrome Molybdenum impactsockets with heat treatment and anti-corrosion finish.

Drive: 1/2”SqSizes: 17, 19, 21mm

HModel No. SX271

H

F

Impact Stud Extractor 6-12mm1/2”Sq Drive

Removes broken and damaged threaded studs fast.Suitable for use with 1/2”Sq drive air impact wrench.Works ef fectively on broken, rusted, stripped andsmooth studs. Chrome Vanadium casing with ChromeMolybdenum jaws.Drive: 1/2”SqCapacity: 6-12mm

Model No. AK718

F

C

Section 12 Impact Sockets & Torque Sticks 515

1/2”Drive

1/2”Drive

1/2”Drive

1/2”Drive

1/2”Drive

1/2”Drive

1/2”Drive

1/2”Drive

A B C

D F

Impact Hex Socket Bit Set 1/2”Sq Drive 8pc

Chrome Molybdenum steel impact sockets with 1/2”Sqdrive. Phosphate finish for added corrosion resistance.Suitable for use with any impact tool. Supplied instorage case.Drive: 1/2”SqContents: 5, 6, 8, 10, 12, 14, 17, 19mmLength 78mm

AModel No. AK5601

Impact TRX-Star* Socket BitSet 1/2”Sq Drive 8pc

Chrome Molybdenum steel impact sockets with 1/2”Sqdrive. Phosphate finish for added corrosion resistance.Suitable for use with any impact tool. Supplied instorage case.Drive: 1/2”SqContents: T30, T40, T45, T50, T55, T60, T70, T80Length: 78mm

BModel No. AK5602

Impact Hex & TRX-Star* SocketBit Set 1/2”Sq Drive 8pc

Chrome Molybdenum steel impact sockets with 1/2”Sqdrive. Phosphate finish for added corrosion resistance.Suitable for use with any impact tool. Supplied instorage case.Drive: 1/2”SqContents: Hex; 5, 6, 8, 10mm,TRX-Star*; T30, T40, T45, T50Length: 78mm

CModel No. AK5603

H I

Deep

Impact Spline Socket Bit Set 1/2”Sq Drive 8pc

Chrome Molybdenum steel impact sockets with 1/2”Sqdrive. Phosphate finish for added corrosion resistance.Suitable for use with any impact tool. Supplied instorage case.Drive: 1/2”SqContents: M5, M6, M8, M10, M12, M14, M16, M18Length: 78mm

DModel No. AK5604

Impact Ribe Socket Bit Set1/2”Sq Drive 8pc

Chrome Molybdenum steel impact sockets with 1/2”Sqdrive. Phosphate finish for added corrosion resistance.Suitable for use with any impact tool. Supplied instorage case.Drive: 1/2”SqContents: M5, M6, M7, M8, M9, M10, M12, M14Length: 78mm

EModel No. AK5605

Impact Hex Socket Bit Set3/4”Sq Drive 6pc

Durable Chrome Molybdenum steel gives optimumbalance between hardness and flexibility. Suitable foruse with any impact tool. Supplied in a storage case.

Drive: 3/4”SqContents: 14, 17, 19, 22, 24, 27mmLength: 108mm

FModel No. AK5586

Impact Universal Joint SocketSets

Chrome V anadium steel universal joint sockets forgetting into restricted areas. Suitable for use on all typesof impact tools. Blackened finish provides corrosionresistance. Supplied in a storage case.Model No: Drive: Type: Contents:AK6701 3/8”Sq 7pc Set 10, 11, 12, 13, 14, 16, 17mmAK6703 1/2”Sq 8pc Set 13, 14, 15, 16, 17, 18, 19, 21mm


Impact Universal Joint DeepSocket Sets

Chrome Vanadium steel universal joint deep sockets.Suitable for use on all types of impact tools. Blackenedfinish provides corrosion resistance. Supplied in a metalstorage case.Model No: Drive: Type: Contents:AK6702 3/8”Sq 7pc Set 10, 11, 12, 13, 14, 16, 17mmAK6704 1/2”Sq 7pc Set 13, 14, 15, 17, 18, 19, 21mm


E

or

G

Impact TRX-Star* FemaleSocket Set 1/2”Sq Drive 9pc

Chrome Molybdenum steel impact sockets with 1/2”Sqdrive. Phosphate finish for added corrosion resistance.Suitable for use with any impact tool. Supplied instorage case.Contents: E10, E11, E12, E14, E16, E18, E20, E22, E24

GModel No. AK2301

Section 12 Impact Socket Sets & Universal Joints516

1/2”Drive

1/2”Drive

1/2”Drive

1/2”Drive

1/2”Drive

3/4”Drive

1/2”Drive

1/2”Drive

3/8”Drive or 1/2”

Drive3/8”

Drive

Universal Impact Joints

Drop-forged steel universal joints. Suitable for use onall types of impact tool. Chrome Vanadium steel usedon 3/8”Sq drive size. Chrome Molybdenum steel usedwhere applications demand higher torque rates.Phosphate finish for added corrosion resistance.Spring ball socket retainer and drilled head to acceptretaining pin where applicable.

Model No: Drive: Length: Material:AK5497 3/8”Sq 50mm CrVAK5500 1/2”Sq 70mm CrMAK5498 3/4”Sq 110mm CrMAK5499 1”Sq 130mm CrM

Impact Adaptors

Drop-forged steel adaptors. Suitable for use on alltypes of impact tool. Chrome Vanadium steel used onAK5400 and AK5401. Chrome Molybdenum steel usedwhere applications demand higher torque rates.Phosphate finish for added corrosion resistance.Spring ball socket retainer and drilled head to acceptretaining pin where applicable.

Model No: Female: Male: Length: Material:AK5400 3/8”Sq 1/2”Sq 36mm CrVAK5401 1/2”Sq 3/8”Sq 38mm CrVAK5402 1/2”Sq 3/4”Sq 48mm CrMAK5403 3/4”Sq 1/2”Sq 58mm CrMAK5404 3/4”Sq 1”Sq 63mm CrMAK5405 1”Sq 3/4”Sq 70mm CrM


A


B

Impact Extension Bars

Drop-forged steel extension bars. Suitable for use onall types of impact tool. Chrome Vanadium steel usedon 3/8” and 1/2”Sq drive sizes. Chrome Molybdenumsteel used on 3/4” and 1”Sq drive sizes which demandhigher torque rates. Phosphate finish for addedcorrosion resistance. Spring ball socket retainer anddrilled head to accept retaining pin where applicable.

Model No: Drive: Length: Material:AK5503 3/8”Sq 75mm CrVAK5504 3/8”Sq 150mm CrVAK5501 1/2”Sq 75mm CrVAK55012 1/2”Sq 125mm CrVAK5502 1/2”Sq 150mm CrVAK55022 1/2”Sq 250mm CrVAK5505 3/4”Sq 100mm CrMAK5506 3/4”Sq 150mm CrMAK5507 3/4”Sq 200mm CrMAK5508 3/4”Sq 250mm CrMAK5510 1”Sq 150mm CrMAK5511 1”Sq 200mm CrMAK5512 1”Sq 250mm CrM


D 1/4”Drive

3/8”Drive

1/2”Drive

3/4”Drive

1”Drive

1

1 2 3 4

2 3

4

56

3

12

456

3

12

4

IMPORTANT SAFETY WARNING!!Always wear eye or face protection whenusing these tools! For a full range of goggles, visors, gloves and ear defend ers,plus other safety equip ment, see pages707 to 717 of this catalogue.

CORDLESS IMPACT WRENCH

CP3004 is the most powerful cordless impact wrench in theSealey range, producingtorque in excess of 542Nm(400lb.ft) - enough to removewheel nuts. Forward andreverse controls integratedinto housing for ease of use. See page 558 & 559 for fullspecification.

Impact Socket Adaptor Set 8pc

Comprehensive set of impact adaptors for use on alltypes of impact tools. Manufactured from drop forgedChrome V anadium steel with phosphate finish foradded corrosion protection.Contents: 1/4”F x 3/8”M, 3/8”F x 1/4”M, 3/8”F x 1/2”M,1/2”F x 3/8”M, 1/2”F x 3/4”M, 3/4”F x 1/2”M, 3/4”F x 1”M,1”F x 3/4”M

DModel No. AK5900

Section 12 Impact Adaptors & Extensions 517

C 3/8”Drive

1/2”Drive

3/4”Drive

1”Drive

3/8”Drive

1/2”Drive

3/4”Drive

1”Drive

10mm Reversible Air Drill

Polished aluminium housing with textured grip handleand planetary gear drive assembly . Featuresreversible action making this tool suitable for drivingfixings. Fitted with 10mm drill chuck and supplied withchuck key. Suitable for general workshop use.Chuck Size: 10mmFree Speed: 1800rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.1kg

AModel No. SA24

A

10mm Reversible Air Drillwith Keyless Chuck

Polished aluminium housing with textured grip handleand planetary gear drive assembly . Featuresreversible action making this tool suitable for drivingfixings. Fitted with 10mm keyless drill chuck. Suitablefor general workshop use.Chuck Size: 10mmFree Speed: 1800rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.1kg

BModel No. SA241

B

10mm Premier Super-Duty AirDrill with Keyless Chuck

Fully polished finish with exhaust through handle basefor reduced noise emission. Smooth air motor runs onhigh quality ball bearings for long life and reliability .Fully reversible drive with fingertip control set abovetrigger. Fitted with Jacobs keyless chuck for fast bitchanges. Rubber grip gives added control.Chuck Size: 10mmFree Speed: 1800rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.1kg

DModel No. SA620

D

I

13mm Reversible Air Drillwith Keyless Chuck

Powerful drill with polished aluminium housing, texturedgrip, heavy-duty, planetary gear drive assembly and 13mmkeyless chuck. Fitted with flip-reverse control and suppliedwith side handle. Suitable for heavy workshop use.Chuck Size: 13mmFree Speed: 700rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.4kg

GModel No. SA27

G

G

Replacement Cutter Crowns

Double sided cutter crowns for Z1 spot removal tool.Pack of two.

FModel No. Z1C2

10mm Spot Weld Cutter

Spring loaded centre point guides cutter crown ontospot weld. Fine adjustment of cutting depth by screwpermits top panel to be removed leaving the lowerpanel free to be dressed clean for replacement panel.Suitable for air and electric drills.

EModel No. Z1

E

F

H

10mm Generation Reversible AirDrill with Keyless Chuck

Fully polished finish with exhaust through handle basefor reduced noise emission. Unit features encaged twingear drive assembly. Rotor runs on high quality ballbearings for long life and reliability . Fully reversibledrive with fingertip control set above trigger. Fitted withJacobs keyless chuck for fast bit changes. Contouredsoft-grip handle gives added comfort and control.Chuck Size: 10mmFree Speed: 2200rpmAir Consumption: 4.5cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.2kg

CModel No. GSA241

C

HfofsbujpoBjsUppmt

HfofsbujpoBjsUppmt

13mm Premier Super-DutyAir Drill with Keyless Chuck

Fully polished finish with exhaust through handle basefor reduced noise emission. Smooth air motor runs onhigh quality ball bearings for long life and reliability .Fully reversible drive with fingertip control set abovetrigger. Fitted with Jacobs keyless chuck for fast bitchanges. Supplied with side handle. Rubber grip givesadded control.Chuck Size: 13mmFree Speed: 650rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.4kg

IModel No. SA621

13mm Generation Reversible AirDrill with Keyless Chuck

Fully polished finish with exhaust through handle basefor reduced noise emission. Unit features encagedplanetary gear drive assembly . Rotor runs on highquality ball bearings for long life and reliability . Fullyreversible drive with fingertip control set above trigger.Fitted with Jacobs keyless chuck for fast bit changes.Supplied with side handle. Contoured soft-grip handlegives added comfort and control.Chuck Size: 13mmFree Speed: 600-700rpmAir Consumption: 4.5cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.5kg

HModel No. GSA27

518 Section 12 Air Drills

Premier

Premier

Ø10mm

Reversible

Ø10mm

Reversible

Ø10mm

Reversible

Ø10mm

Reversible

Ø13mm

Reversible

Ø13mm

ReversibleØ13mm

Reversible

Straight Reversible AirScrewdriver

Fully polished, machined, aluminium body. Featuresthree speed settings with forward/reverse controland quick release bit mechanism. Ideal forassembly/dismantling and general production work.Suitable for use with AK2099 Power Tool Bit Set.

Chuck Size: 6mm Hex Quick-Release TypeMaximum Torque: 115lb.inFree Speed: 9800rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.8kg

EModel No. SA57

E

10mm Straight Air Drill

Straight type air drill with machined aluminium body .Unit features planetary gear drive assembly, built-in airregulator, built-in muffler and safety trigger to preventinadvertent operation. Supplied with 10mm drill chuckand key. Suitable for general workshop use.

Chuck Size: 10mmFree Speed: 2500rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.9kg

AModel No. SA232

A

10mm Premier Straight Air Drillwith Keyless Chuck

Fully polished finish with exhaust through rear forreduced noise emission. Smooth air motor runs onhigh quality ball bearings for long life and reliability .Safety trigger prevents inadvertent operation. Fullcage type gearbox gives added torque. Fitted withJacobs keyless chuck for fast bit changes.


BModel No. SA622

B

10mm Reversible Air Angle Drill

Right angle air drill with 90° planetary gearbox. Idealfor drilling in hard to get at areas where normal drillswill not fit. Push-button reverse feature suitable fordriving fixings. Supplied with 10mm chuck and key .


CModel No. SA26

C

Pistol-Grip Reversible AirScrewdriver

Pistol-grip style, air operated screwdriver with reversecontrol. Positive clutch gives up to 115lb.in of torque.Suitable for assembly/dismantling and generalproduction work.Chuck Size: 6mm Hex Quick-Release TypeMaximum Torque: 115lb.inFree Speed: 1800rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.7kg

FModel No. SA58

F

Premier Pistol-Grip Super-DutyReversible Air Screwdriver

Fully polished finish with exhaust through handle basefor reduced noise emission. Smooth air motor runs onhigh quality ball bearings for long life and reliability .Fully reversible drive with finger-tip control set abovetrigger. Fully adjustable torque between specifiedranges. Accepts 6mm hex driver bits. Rubber gripgives added control.


GModel No. SA623

See pages 544 to 546 for details ofour comprehensive range

of Retracting Air Hose Reels.

Drill Nibbler Attachment

Turns an electric or air drill into a versatile nibblersuitable for cutting intricate shapes in mild steel up to1.6mm thick. Fits any 13mm drill chuck.

Minimum/Maximum Speed: 1500/3000rpmMaximum Capacity:Steel: 1.6mmStainless: 1.0mmBrass, Plastic, Copper: 2.0mmReplacement Punches: (Pack of 2) SNA9820PReplacement Die: SNA9820D

DModel No. SNA9820

D

D

G

IMPORTANT SAFETY WARNING!!Always wear eye or face protection whenusing these tools! For a full range of goggles, visors, gloves and ear defend ers,plus other safety equipment, see pages707 to 717 of this catalogue.

Section 12 Air Drills & Screwdrivers 519

Premier

Premier

Ø10mm Ø10mm

Ø10mm

Reversible

Reversible Reversible Reversible

Section 12 Air Die Grinders520

Mounted Grinding Points

Mounted point on Ø6mm shank and suitable for usewith Sealey and other brands of die grinder. Suppliedindividually.

Model No: Tip Ø: Tip Length: Length:SA67/W01 10mm 25mm 52mmSA67/W02 20mm 20mm 50mmSA67/W03 25mm 22mm 52mmSA67/W04 25mm 10mm 45mmSA67/W05 20mm 26mm 52mmSA67/W06 20mm 25mm 52mmSA67/W07 25mm 25mm 52mmSA67/W08 16mm 26mm 52mmSA67/W09 25mm 25mm 52mmSA67/W10 25mm 25mm 52mm

C

3

12

456

87

910

Model No. SEE BELOW

Air Die Grinder Kit 13pc

One-handed straight type die grinder with aluminiumbody and trigger with safety catch. Chuck acceptsgrinding points with 6mm shanks. Supplied with aselection of popular sized grinding points, twowrenches and carry-case.

Collet Size: Ø6mmFree Speed: 22000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.4kg

AModel No. SA67

C

Air Die Grinder

One-handed straight type die grinder with aluminiumbody and trigger with safety catch. Chuck acceptsgrinding points with Ø6m shanks. Supplied with chuckwrenches.


DModel No. SA671

D E

3

1 2

4

5 6

7 8

109

Air Tool Oil

Maintain your air tools with a quality high performanceair tool oil containing mineral lubricants anddetergents.Model No: Pack Qty: Size:ATO/500 12 500mlATO500S 1 500mlATO/1000 12 1ltrATO1000S 1 1ltr


F

Generation Air Die Grinder Kit13pc

Powerful, Third Generation die grinder . Contouredhandle insulates user from chill and vibration.Directional, low noise air exhaust can be rotated 360°giving operator added protection. Includes 4-position airvalve and throttle safety device. Supplied with set ofØ6mm grinding points, chuck wrenches and carry-case.Collet Size: Ø6mmFree Speed: 25000rpmAir Consumption: 3cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.1kg

BModel No. GSA67

Generation Air Die Grinder

Powerful, Third Generation die grinder . Contouredhandle insulates user from chill and vibration.Directional, low noise air exhaust can be rotated 360°giving operator added protection. Includes 4-position air valve and throttle safety device.


EModel No. GSA671

BA

E

HfofsbujpoBjsUppmt

HfofsbujpoBjsUppmt

G H

Spring Balancers

Designed to support the weight of the tool, reduceoperator fatigue and keep the benches and productionlines free of clutter . Simple clip-on tool attachmentfitted to multi-strand steel cable. Fine adjustment bylarge plastic knob.

Model No: Weight Range: Cable Length:ATB0615 0.5-1.5kg 1.5mtrATB1530 1.5-3.0kg 1.5mtr

Model No. SEE BELOW

G H -

GH

Premier Air Die GrinderMidi Size Straight Super-Duty

Shaped composite cover moulded around lightweightaluminium alloy housing reduces ef fects of chill onoperator’s hands and provides added control. Airmotor with quality bearings for smooth and powerfuloperation. Integral sintered brass baf fle with rearexhaust gives quiet operation. Fitted with safety triggerto prevent inadvertent operation. Supplied withwrenches. Suitable for professional users.Configuration: Straight - MidiMotor Power: 0.3hpFree Speed: 25000rpmCollet Size: Ø6mmAir Consumption: 3cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.4kg

AModel No. SA652

A B C

D

Air Micro Die GrinderØ3mm Collet

Air motor with quality bearings for smooth and powerfuloperation. Shrouded exhaust gives quieter operation.Suitable for professional users. Supplied withwrenches and grinding points, air tool oil, in-line oilerand quick connector.Contents: Air Micro Grinder, 10 Grinding Points, Air Tool Oil, In-line Oiler , Quick Connector , Chuck W renchesAir Micro Grinder:Free Speed: 58000rpmAir Consumption: 3cfmCollet: Ø3mmOperating Pressure: 90psi

GModel No. SA673

G

F

Long Reach

SA673 is supplied with a complete accessory setincluding mounted tips and air lubricator.

Generation Air Die GrinderLong Reach 100mm Shank

Powerful, Third Generation long reach die grinder .Contoured handle insulates user from chill andvibration. Directional, low noise air exhaust can berotated 360° giving operator added protection.Includes 4-position air valve and throttle safety device.Length: 245mmCollet Size: Ø6mmFree Speed: 23000rpmAir Consumption: 3cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.6kg

EModel No. GSA672

E HfofsbujpoBjsUppmt

Air Engraver

Composite bodied high quality tool with TungstenCarbide tip for engraving metals and plastics. Suitablefor security marking loan products, applying servicedate information to tools and for marking componentsprior to storage. Supplied with 1.5mtr small borehosing and 1/4”BSP adaptor.Free Speed: 3000bpmAir Consumption: 4cfmOperating Pressure: 60psiAir Inlet Size: 1/4”BSPWeight: 0.2kgTungsten Tip: SA96/03

FModel No. SA96

Long Reach

Air Die Grinder Long Reach150mm Shank

One-handed, straight type die grinder with machinedaluminium body . Long reach head chuck acceptsgrinding points with Ø6mm shanks. Supplied withwrenches.

Length: 235mmCollet Size: Ø6mmFree Speed: 25000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.7kg

DModel No. SA672

Premier Air Die Grinder Midi Size 90º Super-Duty

Shaped composite cover moulded around lightweightaluminium alloy housing reduces ef fects of chill onoperator’s hands and provides added control. Air motorwith quality bearings for smooth and powerfuloperation. Integral sintered brass baf fle with rearexhaust gives quiet operation. Fitted with safety triggerto prevent inadvertent operation. Supplied withwrenches. Suitable for professional users.Configuration: 90º - MidiMotor Power: 0.3hpFree Speed: 18000rpmCollet Size: Ø6mmAir Consumption: 3cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.5kg

CModel No. SA653

Premier Air Die GrinderMaxi Size Straight Super-Duty

Shaped composite cover moulded around lightweightaluminium alloy housing reduces ef fects of chill onoperator’s hands and provides added control. Air motorwith quality bearings for smooth and powerfuloperation. Integral sintered brass baf fle with rearexhaust gives quiet operation. Fitted with safety triggerto prevent inadvertent operation. Supplied withwrenches. Suitable for professional users.Configuration: Straight - MaxiMotor Power: 0.6hpFree Speed: 20000rpmCollet Size: Ø6mmAir Consumption: 3cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.6kg

BModel No. SA654

Section 12 Air Die Grinders & Engravers 521


See page 562 for ourElectric Engraver & Multi-Tool Sets.

Section 12 Air Nibblers & Shears522

Air Nibbler

Well balanced, robust construction with fingertipoperated throttle control. Suitable for cutting intricateshapes in steel up to 1.5mm thick. Punch and die maybe rotated through 360° to aid access and obtainmaximum consumable life.Maximum Cutting Capacity: 1.5mm (Steel)Free Speed: 2500spmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.0kg

DModel No. SA28

D

Generation Air Nibbler

Third Generation air nibbler features contoured andinsulated handle to protect operator from the effects ofvibration and chill. Smooth operating mechanism suitablefor cutting intricate shapes in steel up to 1.5mm thick.

Maximum Cutting Capacity: 1.5mm (Steel)Free Speed: 3500spmAir Consumption: 6cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.0kg

EModel No. GSA28

E

Air Shears

Suitable for cutting straight lines in metal sheet. Palmthrottle control and alloy head and housing. Blades areconsumable items and are not covered by warranty .Maximum Cutting Capacity: 1.2mm (Steel)Air Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.1kgReplacement Outer Blade: (Pack of 2) SA53/36Replacement Centre Blade: (Single) SA53/38

AModel No. SA53

A

GPunch & DieSet

Consumable parts forGSA28 air nibbler. Onepunch and a die.

HModel No. GSA28.39-40

H

Generation Air Shears

Third Generation air nibbler features contoured andinsulated handle to protect operator from the effects ofvibration and chill. Smooth operating mechanismsuitable for cutting straight lines in steel sheet up to1.2mm thickness.Maximum Cutting Capacity: 1.2mm (Steel)Air Consumption: 6cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.6kgReplacement Outer Blade Left: GSA53.34Replacement Outer Blade Right: GSA53.37Replacement Centre Blade: GSA53.35

BModel No. GSA53

Air Sheet Saw

Aluminium housing and safety guard. Fitted with safetytrigger control. Suitable for cutting steel up to 2mm andaluminium sheet up to 8mm thick. Supplied with cuttingblade.

Max. Cutting Capacity:2mm (Steel), 8mm (Aluminium)Free Speed: 600rpmAir Consumption: 6cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.6kgReplacement Saw Blade: SA72/B

FModel No. SA72

F

B



IModel No. SA901

I

Air Scissors

Polished aluminium housing with textured grip handle.Suitable for accurately cutting metal sheet. Unlike airshears this tool is ideal for trimming ragged sheetedges to gain a flat finish. Handle exhaust helpsreduce noise level.Maximum Cutting Capacity: 1.2mmAir Consumption: 4.3cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.4kgReplacement Blade Left: SA55.36Replacement Blade Right: SA55.37

CModel No. SA55

C

IMPORTANT SAFETY WARNING!Always wear eye or face protection whenusing these tools! For a full range of goggles, visors, gloves and ear defenders,plus other safety equipment, see pages707 to 717 of this catalogue.


HfofsbujpoBjsUppmt

HfofsbujpoBjsUppmt

Punch & DieSet

Consumable parts forSA28 air nibbler . Twopunches and a die.

GModel No. SA28/PDK

Air Cut-Off Tool

Versatile tool, suitable for cutting car panel thicknessmaterial. Ideal also for cutting exhaust brackets. Fittedwith metal safety guard and throttle safety device toprevent accidental operation. Cutting disc not included.

Disc Size: Ø75 x 2 x 10mmFree Speed: 20000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.8kgCutting Discs: (Single) PTC/3C

(Pack of 5) PTC/3C5

AModel No. SA25

A

Generation Air Cut-Off Tool

Powerful Third Generation air cut-of f tool. Contouredhandle insulates user from chill and vibration. Metal discguard and rear air exhaust can be rotated 360° givingoperator added protection. Includes 4-position air valveand throttle safety device. Supplied with cutting disc.


(Pack of 5) PTC/3C5

BModel No. GSA25

B

Tyre Buffing Kit

Aluminium cased air motor with selection of Ø6mm-shanked grinding points, 10mm chuck and tyre buffingcone. Kit also includes wrenches, chuck key and airhose adaptors.

Chuck Size: 10mmFree Speed: 22000rpmAir Consumption: 5cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.4kgTyre Cone: SA651/C

EModel No. SA92

E F

Air Punch/Flange Tool

Suitable for heavy body shop use. Aluminium alloybody with steel punch and die. Puts a 10mm flangeonto car panel thickness sheet for lap jointing and puts5mm holes in panels for MIG spot-welding.

Operating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.3kgReplacement Punch: SA36/36Replacement Die: SA36/40

GModel No. SA36

Tyre Buffing Cone for SA651 &SA92

Tyre buffing cone, arbor and spacer for SA651 andSA92.

HModel No. SA651/C

G

Ø75mmØ75mm

HfofsbujpoBjsUppmt

Disc not included

Premier Air Cut-Off Tool

Shaped composite cover moulded around lightweightaluminium alloy housing for ultimate comfort andcontrol. Air motor with quality bearings for smooth andpowerful operation. Integral sintered brass baf fle withrear exhaust gives quiet operation. Fitted with metalsafety guard and safety trigger. Cutting disc not included.Disc Size: Ø75 x 2 x 10mmFree Speed: 22000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.9kgCutting Discs: (Single) PTC/3C

(Pack of 5) PTC/3C5

CModel No. SA650

C

Premier Air Tyre Buffer

Geared tyre buf fer with shaped composite covermoulded around lightweight aluminium alloy housingfor ultimate comfort and control. Air motor with qualitybearings for smooth and powerful operation. Integralsintered brass baffle with rear exhaust reduces noise.Fitted safety trigger. Buffing cone not included.

Free Speed: 2500rpmAir Consumption: 3cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.8kgBuffing Cone: SA651/C

FModel No. SA651

H

Ø75mmDisc not included

Premier Air Angle Cut-Off ToolLong Reach

Extended reach cut-off tool is especially suitable forcutting of f rear axle and exhaust tubes/brackets.Additionally suited to cutting of f side frames or doorsills. Fitted with metal safety guard and throttle safetydevice to prevent accidental operation. Cutting disc notincluded.


(Pack of 5) PTC/3C5


D


Premier

Premier Premier

Section 12 Air Cut-Off Tools & Tyre Buffing Tools 523

Industrial Air Hammer

Heavy-duty alloy handle with thumb actuated trigger control. Large open gripenables use of this tool whilst wearing heavy gauntlets or gloves. Supplied withchisel retaining spring. Chisel not included.Chisel Shank Size: 12.7 x 47mmSpeed: 3000bpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.6kgReplacement Retaining Spring: SA120/21Optional Chisels:Model No:

SA120/F Flat ChiselSA120/P Pointed Chisel

HModel No. SA120

5 6 7 8 9

B C

Air Chisel Set 5pc

Set of air chisels suitable for Sealey and other brandsof air hammers. Supplied in tool roll.

Chisel Shank Size: .401” Parker TaperContents:Cold Chisel, Special Panel Cutter, RippingChisel, Double Sided Panel Cutter, Long Blade PanelCutter

BModel No. AK50

Air Chisel Set 7pc

Set of air chisels suitable for Sealey and other brandsof air hammers. Supplied in tool roll.

Chisel Shank Size: .401” Parker TaperContents:Panel Cutter, Muffler Tail Pipe Remover ,Weld Buster, Cold Chisel, Tapered Punch, SpecialPanel Cutter, Long Blade Cutter

CModel No. AK57

Air Needle Scaler

Suitable for cleaning heavy paint and rust scale frommetal surfaces. Palm control trigger mechanism.Replaceable scaler needles.

Stroke: 16mmFree Speed: 4000bpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.2kgReplacement Needle Set (12): SA51/16

Model No. SA51

E Air Needle Scaler/Flux Chipper

Straight type air hammer supplied with interchangeableneedle and chisel heads. Suitable for cleaning heavypaint and rust scale from metal surfaces. Palm controltrigger mechanism. Replaceable scaler needle set.Stroke: 16mmFree Speed: 4000bpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.2kgReplacement Needle Set (12): SA51/16Replacement Chisel: SA52/15

FModel No. SA52

F

H

D 1

1

2

2 3 4

E

12

Straight Reversible AirScrewdriver

Fully polished, machined, aluminium body. Featuresthree speed settings with forward/reverse controland quick release bit mechanism. Ideal forassembly/dismantling and general production work.Suitable for use with AK2099 Power Tool Bit Set.


GModel No. SA57

G

Air Chisel Quick ReleaseCoupling

Suitable for use with .401” Parker taper chisels. Quickrelease feature allows fast and easy interchanges.Compatible with the Sealey Air Hammer range andother leading air tool suppliers.

Application: .401” Parker Taper

AModel No. New SA11QRC

A

Section 12 Air Hammer, Driver & Scalers524

Air Hammer Accessories

Suitable for SA11, SA12/S, GSA11, GSA12, SA611,SA612 and other leading brands of air hammer .Chisels have .401” Parker taper shanks.

Model No: Description:AK57/1 Cold ChiselAK57/2 Weld BusterAK57/3 Taper PunchAK57/4 Panel CutterAK57/5 Special Panel CutterAK57/6 Pipe RemoverAK57/7 Long Blade Panel CutterAK57/8 Double-Sided Panel CutterSA11R/17 Spring Retainer


123456789

Section 12 Air Hammers 525

A

C

E

SHORT STROKE

MEDIUM STROKE

MEDIUM STROKE

LOW VIBRATION

HfofsbujpoBjsUppmt

Air Hammer Kit - Long Stroke

Quality long stroke air hammer supplied in carry-case. Kit also includes spare springretainer, long bladed panel cutter, special panel cutter, panel cutter, muffler tail piperemover and cold chisel.Chisel Shank Size: .401” Parker TaperSpeed: 3500bpmStroke: 67mmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.5kg

BModel No. SA11

B

D

LONG STROKE

LONG STROKE

F

HfofsbujpoBjsUppmt

Air Hammer Kit - Medium Stroke

Quality medium stroke air hammer supplied in carry-case. Kit also includes sparespring retainer, weld buster, special panel cutter, pointed chisel, muffler tail piperemover and cold chisel.Chisel Shank Size: .401” Parker TaperSpeed: 4500bpmStroke: 32mmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.2kg

AModel No. SA12/S

Generation Air Hammer Kit - Long Stroke

Third Generation air hammer kit supplied in carry-case. Handle exhaust reducesnoise emission and contoured, soft-grip allows added comfort and control. Kitincludes spring retainer, taper punch, long bladed panel cutter, weld buster, panelcutter and cold chisel.Chisel Shank Size: .401” Parker TaperSpeed: 3600bpmStroke: 66mmAir Consumption: 5cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.3kg

DModel No. GSA11

Generation Air Hammer Kit - Medium Stroke

Third Generation air hammer kit supplied in carry-case. Handle exhaust reducesnoise emission and contoured soft-grip allows added comfort and control. Kitincludes spring retainer, taper punch, special panel cutter, weld buster, panel cutterand cold chisel. Chisel Shank Size: .401” Parker TaperSpeed: 4300bpmStroke: 43mmAir Consumption: 5cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.2kg

CModel No. GSA12

Premier Air Hammer Low Vibration - Short Stroke

Almost half the vibration level of a traditional low cost air hammer. Handle exhaustgives reduced noise output. Heat treated alloy steel impact components andcontoured rubber grip make this tool both hard-wearing and comfortable to use.Accepts standard .401” Parker taper shank chisels.Chisel Shank Size: .401” Parker TaperSpeed: 3000bpmStroke: 66mmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.8kg

EModel No. SA612

Premier Air Hammer Low Vibration - Long Stroke

Almost half the vibration level of a traditional low cost air hammer. Handle exhaustgives reduced noise output. Heat treated alloy steel impact components andcontoured rubber grip make this tool both hard-wearing and comfortable to use.Accepts standard .401” Parker taper shank chisels.Chisel Shank Size: .401” Parker TaperSpeed: 2100bpmStroke: 89mmAir Consumption: 4.5cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.1kg

FModel No. SA611

Premier Premier

LONG STROKELOW VIBRATION

Air Saw Blades

HSS Air saw blades suitable for Sealey and otherleading makes of air saw.

Air Saw Blades

Model No: Application: Pack Blade Qty: Pitch:

SA34 - BladesSA34/B14 SA34 5 14tpiSA34/B24 SA34 5 24tpiSA34/B32 SA34 5 32tpi

SA345 - Blades

SA346 - Blades

Premier Air Angle Cut-Off Tool - Long Reach

Extended reach cut-off tool is especially suitable for cutting off rear axle and exhausttubes/brackets. Additionally suited to cutting off side frames or door sills. Fitted withmetal safety guard and throttle safety device to prevent accidental operation.Cutting disc not included.

Disc Size: Ø75 x 2 x 10mmFree Speed: 19000rpmAir Consumption: 7cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.8kgCutting Discs: (Single) PTC/3C, (Pack of 5) PTC/3C5


Model No. SEE BELOW

E G-

SA341/B14 SA345 4 14tpiSA341/B18 SA345 4 18tpiSA341/B24 SA345 4 24tpiSA341/B32 SA345 4 32tpi

A B

C D

E F

LOW VIBRATIONLOW NOISE

LOW VIBRATIONLOW NOISE

LONG STROKE

SA346/B18 SA346 5 18tpiSA346/B24 SA346 5 24tpi

G

GG

FFFF

E

EE

Premier Composite Low Vibration & NoiseReciprocating Air Saw

Low vibration and low noise saw suitable for professional use. V ibration and noisesignificantly reduced by up to 50% against standard air saws. Suitable for a widevariety of body shop applications. Composite case with contoured grip ensurescomfortable operation. Fully enclosed blade chuck. See below for replacement blades.

Maximum Cutting Capacity: 3mm (Steel), 3.5mm (Aluminium)Free Speed: 10000spmStroke: 10mm Air Consumption: 6cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.5kg

BModel No. SA345

Premier Composite Low Vibration & NoiseReciprocating Air Saw Long Stroke

Low vibration and low noise saw suitable for professional use. Vibration and noisesignificantly reduced by up to 50% against standard air saws. Long stroke and longblade combination is suitable for cutting sections, pillars, pipes etc. Fully enclosedblade chuck and safety trigger. Supplied with two blades (18 & 24tpi), hex key andZ swivel air hose connector. See below for replacement blades.Maximum Cutting Capacity: 10mm (Steel), 12mm (Aluminium)Free Speed: 5000spmStroke: 25mmAir Consumption: 6cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.9kg

CModel No. SA346

SAFETY EQUIPMENT

For our full range ofSafety equipment seepages 707 to 717.

Premier

Premier Premier

Section 12 Air Saws526


Reciprocating Air Saw

Suitable for a variety of body shop applications such as cutting through panels,sills, chassis members etc. Excellent for initial crash-repair preparation when quickremoval of damaged panels is required. Fitted with safety-trigger device. Suppliedwith a starter pack of blades.

Maximum Cutting Capacity: 2mm (Steel), 2.5mm (Aluminium)Free Speed: 10000spmStroke: 10mmAir Consumption: 6cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.6kg

AModel No. SA34

Composite

Composite

F

Extra-Heavy-Duty Vacuum SystemAir/Hydraulic Riveter

Powerful, extra-heavy-duty tool suitable for aluminium,steel, stainless steel and structural rivets from 3/16” to1/4”. Trigger operated riveter with hardened steel jawassembly and air-actuated vacuum rivet shaftcollector. Resilient grip for added comfort and hangingloop for use with balancer. Supplied with three rivetingnozzles, two wrenches and oil can.

Nozzle Sizes: 3/16”(4.8mm), 7/32”(5.6mm), 1/4”(6.4mm)Air Consumption: 4.0cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.9kg

Air/Hydraulic Riveter

Powerful tool suitable for both aluminium and steelrivets up to 3/16”. Supplied with four riveting nozzlesand two wrenches. Trigger operated riveter withhardened steel jaw assembly and rivet shaft safety cap.

Nozzle Sizes: 3/32”(2.4mm), 1/8”(3.2mm),5/32”(4.0mm), 3/16”(4.8mm)Air Consumption: 4.2cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.3kg

AModel No. SA31

A B

Heavy-Duty Air/HydraulicRiveter

Heavy-duty model suitable for aluminium, steel andstainless steel rivets up to 1/4”. Supplied with fiveriveting nozzles and two wrenches. Trigger operatedriveter with hardened steel jaw assembly and rivetshaft safety cap. Supplied with swivel hose tail adaptor,riveting nozzles, spare set of jaws, jaw case and returnspring. Will handle heavy assembly work.

Nozzle Sizes: 3/32”(2.4mm), 1/8”(3.2mm)5/32”(4.0mm), 3/16”(4.8mm), 1/4”(6.4mm)Air Consumption: 4.5cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.6kg

CModel No. SA314

C

D

Industrial Oil Free Riveter

Lightweight yet powerful riveter handles aluminiumrivets up to 3/16”(4.8mm). Fast action unit capable of28-30 rivets a minute. Well balanced, trigger operatedunit suitable for light production work.

Nozzle Sizes: 3/32”(2.4mm), 1/8”(3.2mm), 5/32”(4.0mm), 3/16”(4.8mm)Air Consumption: 4.2cfmOperating Pressure: 110psiAir Inlet Size: 1/4”BSPWeight: 1.4kg

EModel No. SA38

E

All our air/hydraulic riveters are fitted with heavy-dutyjaw sets for long and reliable service. Riveters includetools for adjustment/removal of jaws. Aluminium Blind Rivets

Steel shafted aluminium rivets. Average 100 rivets perbag.

Model No: Size:AK99/1 3.2mm(1/8”) x 6.2mmAK99/2 3.2mm(1/8”) x 8.0mmAK99/3 4.0mm(5/32”) x 8.0mmAK99/4 4.8mm(3/16”) x 8.9mmAK99/5 2.4mm(3/32”) x 8.9mm


G

Aluminium Blind Rivets in Tubs

Steel shafted aluminium rivets in handy sized tubs.

Model No: Approx. Qty: Size:AK99/6 2000pc 3.2mm(1/8”) x 10.2mmAK99/7 1200pc 4.0mm(5/32”) x 10.2mmAK99/8 800pc 4.8mm(3/16”) x 10.2mm


HEAVY DUTY

Extra-Heavy

Vacuum System

Industrial

Industrial

DUTY

OIL FREEDModel No. SA316

Industrial Air/Hydraulic Riveter

Heavy-duty model suitable for aluminium, steel andstainless steel rivets up to 3/16”. Supplied with fourriveting nozzles and two wrenches. Trigger operatedriveter with hardened steel jaw assembly and rivetshaft safety cap. Will handle heavy assembly work.

Nozzle Sizes: 3/32”(2.4mm), 1/8”(3.2mm), 5/32”(4.0mm), 3/16”(4.8mm)Air Consumption: 4.0cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.3kg

BModel No. SA312

Section 12 Air Riveters 527

100mm Premier Air Angle Grinder Composite Housing

Lightweight, easy to handle composite body reduces the ef fects of vibration andchill. Features rear exhaust with baffle for reducing noise level, safety throttle leverand spindle stop button. Supplied with side handle and wrench. Grinding disc notsupplied. Professional workshop quality.Disc Size: Ø100mmFree Speed: 10000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet: 1/4”BSPSpindle Size: M10 x 1.5Weight: 1.8kg

EModel No. SA152

E

100mm Pistol Grip Air Angle Grinder

Supplied with steel safety guard. Fitted with air throttle control and triggermechanism. Suitable for general workshop use. Grinding disc not included.Disc Size: Ø100mmFree Speed: 18000rpmAir Consumption: 6cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.1kg

BModel No. SA14

B

LOW VIBRATION

HEAVYDUTY

HEAVYDUTY

D

C

F

50mm Premier Mini Air Angle Grinder

Lightweight mini housing design with textured finish. Ideal for work in confined areas.Features rear exhaust with baffle for reduced noise level and safety throttle lever to stopaccidental operation. Suitable for professional workshop use. Supplied with grinding disc.Disc Size: Ø50mmFree Speed: 15000rpmAir Consumption: 3cfmOperating Pressure: 90psiAir Inlet: 1/4”BSPOverall Length: 125mm (Including Disc)Weight: 0.34kg

AModel No. SA153

A

180mm Heavy-Duty Air Angle Grinder

Well balanced professional tool with side handle, polished aluminium bevel gearhousing and throttle body. Fitted with throttle safety device to prevent accidentaloperation and steel disc guard for added safety. Supplied with wrenches. Suitablefor heavy workshop use. Not suitable for use with cutting discs.

Disc Size: Ø180mmFree Speed: 6000rpmAir Consumption: 21cfmOperating Pressure: 90psiAir Inlet Size: 3/8”BSPWeight: 3.1kg

Model No. SA151

F

100mm Air Angle Grinder

Aluminium body and bevel gear housing with steel disc guard. W ell balanced multi-purpose tool suitable for general workshop use. Supplied with grinding disc,locking and pin wrenches.Disc Size: Ø100mmFree Speed: 11000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.5kg

CModel No. SA43

100mm Heavy-Duty Air Angle Grinder

Aluminium body and bevel gear housing with steel disc guard and side handle.Fitted with throttle safety device to prevent accidental operation. Balanced andcomfortable to operate. Suitable for general/heavy workshop use. Supplied withside handle, grinding disc, locking and pin wrenches.Disc Size: Ø100mmFree Speed: 10000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.9kg

DModel No. SA44

Premier

Premier

Section 12 Air Angle Grinders528

Disc not included

Composite

Ø50mmØ100mm

Ø100mmØ100mm

Disc not included

Ø100mm

Disc not included

Ø180mm

F

Ø75mm

Sanding Discs & PreparationPads for SA719 & SA720

Replacement sanding discs and preparation pads forSA719 and SA720.

Sanding Discs

Model No: Pack Qty: Grade:SA720D60G 10 60 GritSA720D80G 10 80 GritSA720D120G 10 120 Grit

Model No. SEE BELOW

50mm Premier Mini Air OrbitalSander

Textured grip and lightweight aluminium alloy housingprovide comfort and control. Air motor with qualitybearings for smooth and powerful operation. Suppliedwith Ø50mm hook and loop pad, 3 starter sandingdiscs and locking pin. Use with SA701 sanding discs.Ø75mm Hook and loop pad optional - See page 570.Disc Size: Ø50mmMotor Power: 0.3hpFree Speed: 15000rpmOrbit: Ø4mmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.6kg

CModel No. SA721

C


Lightweight and versatile sanding tool suitable for usewith mini sanding pads or 3M ® bristle pads and 3M®

backing pads. 97° Angle head with gearless drive givesoptimum operator comfort with performance. Fittedwith safety release trigger control and whip hose.Includes backing pad, wrench and sanding disc.

Disc Size: Ø50mmDrive Thread Size: 1/4”-20UNCFree Speed: 25000rpmAir Consumption: 10cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.6kg

AModel No. SA19/S

A

50mm Premier Random OrbitalMini Sander

Shaped composite cover moulded around lightweightaluminium alloy housing reduces ef fects of chill onoperator’s hands and provides added control. Air motorwith quality bearings for smooth and powerfuloperation. Integral sintered brass baf fle with rearexhaust gives quiet operation. Fitted with safety triggerto prevent inadvertent operation. Supplied with wrenchand Ø50mm pad for hook and loop discs.Disc Size: Ø50mmMotor Power: 0.3hpFree Speed: 15000rpmOrbit: Ø3mmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.75kg

BModel No. SA701

B

G H

Preparation PadsModel No: Pack Qty: Pack Type:SA720PPF 3 FineSA720PPM 3 MediumSA720PPC 3 Coarse

Ø50mm

Ø50mm

Ø50mm

Ø50mmSanding Discs

Model No: Grade:SA701D60G 60SA701D80G 80SA701D120G 120

50mm Premier Air Mini SanderKit 35pc

Designed for smart repair and spot refinishing. 90°Handle configuration with double finger trigger allowsunit to fit snugly into palm for added control. Rubberfinger cover reduces effects of chill. Handle exhaustreduces noise and surface contamination. Fitted withvariable speed control. Supplied with selection ofØ50mm discs and pads with industry standard fitting.Supplied in carry-case.

Contents: Ø50mm Backing Pad, Sanding Discs; (10pcs each) - #60, #80, #120grit, Surface Prep Pads (3pcs) - Fine/Medium/CoarseDisc Size: Ø50mmFree Speed: 15000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.75kg

EModel No. SA720

E

Air Angle Grinder/Sander Kit48pc

One-handed straight type air angle grinder . Use aseither a die grinder or simply insert the backing padattachment to convert into a sander. Includes variousgrinding points and Ø50/75mm sanding discs.Supplied in carry-case.

Collet Size: Ø6mm, Ø3mmDisc Size: Ø50mm, Ø75mmMotor Power: 0.3hpFree Speed: 19000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.64kg

DModel No. SA719

D

Ø50mm&

Ø75mm

75mm Premier Mini Air Polisher

Textured grip and lightweight aluminium alloy housingprovide comfort and control. Air motor with qualitybearings for smooth and powerful operation. Suppliedwith Ø75mm hook and loop pad and wrench. Use withØ79mm compounding heads, Ø50mm hook and looppad optional - See page 570.Disc Size: Ø75mmFree Speed: 2500rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.7kg

FModel No. SA722

See page 570 for our full range of Compounding Heads.

G H-

G

H

Premier

Premier

Premier

Premier

Section 12 Mini Air Sanders & Polishers 529

Section 12 Air Sanders530

F QUIETRUNNING

150mm Random Orbital SanderQuiet Running

Lightweight, balanced aluminium body with doublebearing counter balance assembly and spindle lockdevice for easy pad removal. Housing fitted withcomposite cap and internal baf fle for quiet operation.Equipped with airflow control valve. Supplied withØ150mm self-adhesive pad.Pad Size: Ø150mmThread Size: 5/16”UNFFree Speed: 10000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.9kg

FModel No. SA77

150mm Heavy-Duty RandomOrbital Sander

Lightweight, balanced aluminium body with smoothdouble bearing counter balance assembly for fatiguefree operation. Fitted with air flow control valve andhousing insulation to prevent hand chill. Supplied withØ150mm hook-and-loop pad.

Pad Size: Ø150mmThread Size: 5/16”UNFFree Speed: 10000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.0kg

GModel No. SA7/S

H

SUPER DUTY

E

HEAVY DUTY

C

150mm Premier Air Palm Sander

Polycarbonate outer housing with soft rubber handgripreduces hand-chill and vibration with an overall weightof 0.7kg. Features adjustable air regulator foradditional control and exhaust muffler to reduce noiseemission. Supplied with hook-and-loop pad.Pad Size: Ø150mmThread Size: 5/16”UNFFree Speed: 10000rpmAir Consumption: 16cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.7kg

BModel No. SA800

B

G

Dust-Free Conversion Kit

Both the SA7 and SA7/S can be converted to run on dust-free equipment. The DFS/ACC3 kit contains anair diversion plate, gasket, suction cowl, extensiontube and Ø28mm hose connector . Converts similarmodels from other manufacturers too.

EModel No. DFS/ACC3

Dust-Free

DHigh Speed Orbital Sander

Direct drive, pistol type sander with aluminium bodyand steel safety guard. Fitted with air flow speedcontrol and supplied with three sizes of backing pads.Suitable for flexible sanding discs.Pad Size: Ø76, Ø114, Ø140mmFree Speed: 18000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.3kg

DModel No. SA10

150mm Premier Dust-Free Air Palm Sander

Polycarbonate outer housing with soft rubber handgripreduces hand-chill and vibration with an overall weightof 0.7kg. Features adjustable air regulator for additionalcontrol. Exhaust muf fler to reduce noise emission.Dust-free outlet for use with centralised dust extractionsystems. Supplied with hook-and-loop pad.

Pad Size: Ø150mmThread Size: 5/16”UNFFree Speed: 10000rpmAir Consumption: 16cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPVac Outlet Ø: 28mmWeight: 0.7kgSupplied with: Universal S/A Dust-Free Pad

CModel No. SA801

150mm Super-Duty RandomOrbital Sander

High quality dual action sander with internally chromedcylinder and precision bearings for super-smoothoperation. Fitted with air flow control valve and housinginsulation to prevent hand chill. Supplied with Ø150mmhook-and-loop pad.

Pad Size: Ø150mmThread Size: 5/16”UNFFree Speed: 10000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.0kg

HModel No. SA7

75mm Premier Air Palm Sander

Polycarbonate outer housing with soft rubber handgripreducing hand-chill and vibration with an overall weightof 0.54kg. Features adjustable air regulator foradditional control and exhaust muffler to reduce noiseemission. Supplied with hook-and-loop pad.Pad Size: Ø75mmThread Size: 5/16”UNFFree Speed: 13000rpmAir Consumption: 4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.54kg

AModel No. New SA802

A

Premier Premier PremierØ75mm Ø150mm

Ø50mm

Ø150mm Ø150mm

Ø150mm


High quality air tool manufactured in the EU. All internalcomponents are chromed or are resistant to rust forlong, trouble-free operation. Requires no oil mist airsupply, reducing contamination of prepared surfaces.Just lubricate when laying up tool for the weekend orprolonged periods and run out oil before starting work.

Capacity: Ø150mm - 5/16”UNFFree Speed: 8000-10000rpmOperating Pressure: 75-90psiAir Consumption: 14.8cfmAir Inlet: 1/4”BSPVac Outlet Ø: 28mmSupplied with: Ø150mm Universal S/A Dust-Free Pad


Fitted with patented air diversion system whichmaximizes level of dust collection. High quality DAsander with internally chromed cylinder and precisionbearings for super-smooth operation. Fitted with airflow control valve and housing insulation to preventhand chill. Pad not included.

Capacity: Ø150mm - 5/16”UNFFree Speed: 8000-10000rpmOperating Pressure: 90psiAir Consumption: 10.6cfmAir Inlet: 1/4”BSPVac Outlet Ø: 28mmOptional Dust-Free Pad: AK289 or AK290

BModel No. SA7/AS


Fitted with patented air diversion system whichmaximizes level of dust collection. Lightweight,balanced aluminium body with smooth double bearingcounter balance assembly for fatigue free operation.Fitted with air flow control valve, safety knuckle guardand housing insulation to prevent hand chill. Pad notincluded.

Capacity: Ø150mm - 5/16”UNFFree Speed: 8000-10000rpmOperating Pressure: 90psiAir Consumption: 10.6cfmAir Inlet: 1/4”BSPVac Outlet Ø: 28mmOptional Dust-Free Pad: AK289 or AK290

AModel No. SA7/SAS

Model No. MA150AS

D

Dust-Free Sander BackingPads

Suitable for air and electric tools fitted with 5/16”UNFthread.

Model No: Diameter-Thread: Suitability:AK289 150mm-5/16”UNF Stick-on PapersAK290 150mm-5/16”UNF Hook & Loop Papers

Model No. SEE BELOW

F

G

F G-

Ø150mm

Dust-Free

Ø150mm

Dust-Free

DUST-FREE VACUUM UNITSWe stock a comprehens ive range of Dust-Free VacuumUnits suitable for body shop use. See page 499 for more details.

Flat Bed Dust-Free Air OrbitalSander

High quality air tool manufactured in the EC. All internalcomponents are chromed or are resistant to rust forlong, trouble-free operation. Requires no oil mist airsupply, reducing contamination of prepared surfaces.Just lubricate when laying up tool for the weekend orprolonged periods and run out oil before starting work.

Capacity: 210 x 115mmFree Speed: 8000-10000rpmOperating Pressure: 75-90psiAir Consumption: 15.2cfmAir Inlet: 1/4”BSPVac Outlet Ø: 28mm

CModel No. MA110AS

C

210 x 115mm

Dust-Free

150mm Dust-Free Self-ContainedAir Random Orbital Sander

High quality air tool manufactured in the EU. All internalcomponents are chromed or are resistant to rust for long,trouble free operation. Self-contained unit with integraldust collection system, means no additional vacuumdevices are required. Requires no oil mist air supply ,reducing contamination of prepared surfaces. Justlubricate when laying up tool for the weekend orprolonged periods and run out oil before starting work.Capacity: Ø150mm - 5/16”UNFFree Speed: 8000-10000rpmOperating Pressure: 75-90psiAir Consumption: 10.6cfmAir Inlet: 1/4”BSPVac Outlet Ø: 28mmSupplied with: Ø150mm Universal S/A Dust-Free Pad

EModel No. MA150SC

FG

D

Dust-Free Ø150mm

Dust-Free Ø150mm

Self-Contained

E

BA

HEAVYDUTY

SUPERDUTY

Section 12 Air Sanders - Dust-Free 531

F

D

30mm

A

10mm

C

20mm10mm

10mm Air Belt Sander

Aluminium housing with articulated sanding arm.Features belt tracking control, heavy-duty nose rollerand one-handed trigger operation. Suitable for sandingotherwise inaccessible areas such as around door-shuts. Supplied with three belts. Replacement beltsreadily available.

Model No. SA35




Air Flat Bed Sander

Orbital flat bed sander with counter-balanced drive shaftfor smooth operation. Palm type trigger with rubberhead ring allows comfortable, one-handed operation.Suitable for sanding body panels, wood, metals andplastics, this tool is suitable for 115mm roll papers anduses strong spring clips to attach them to the base plate.

Pad Size: 170 x 95mmOrbit: Ø5mmFree Speed: 8000rpmAir Consumption: 6cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.0kg

GModel No. SA22

G

170 x 95mm

A20mm Air Belt Sander

Aluminium housing with articulated sanding arm.Features belt tracking control, heavy-duty nose rollerand one-handed trigger operation. Suitable for sandingotherwise inaccessible areas such as around doorshuts. Extra width of belt makes tool suitable forwelding work too. Replacement belts available fromstock.

Model No. SA355

C

30mm Premier Air Belt Sander

Aluminium housing with articulated sanding arm andintegral regulator . Features belt tracking control,heavy-duty nose roller and left or right-hand mountingfor side handle. Suitable for sanding otherwiseinaccessible areas such as around door-shuts. Widebelt makes tool suitable for welding work too.Replacement belts available from stock.

Model No. SA356

D

Sanding Belts

Super-flexible belts for Sealey and other mini beltsanders. Supplied in packs of five.Model No: Nominal Size: Grade:SA35/B40G 10 x 330mm 40 GritSA35/B60G 10 x 330mm 60 GritSA35/B80G 10 x 330mm 80 GritSA35/B100G 10 x 330mm 100 GritSA35/B120G 10 x 330mm 120 GritSA355/B60G 20 x 520mm 60 GritSA355/B80G 20 x 520mm 80 GritSA355/B100G 20 x 520mm 100 GritSA355/B120G 20 x 520mm 120 GritSA356B40G 30 x 540mm 40 GritSA356B60G 30 x 540mm 60 GritSA356B80G 30 x 540mm 80 GritSA356B100G 30 x 540mm 100 Grit


IMPORTANT SAFETY WARNING!Always wear eye or face protection whenusing these tools! For a full range of goggles, visors, gloves and ear defenders,plus other safety equipment, see pages707 to 717 of this catalogue.

Premier

Premier

10mm Premier Air Belt Sander

Aluminium housing with articulated sanding arm.Features belt tracking control, heavy-duty nose roller andone-handed trigger operation. Composite handle withexhaust reduces chill and noise level. Suitable forsanding otherwise inaccessible areas such as arounddoor-shuts. Supplied with three belts. Replacement beltsreadily available. (Use Sealey Model No. SA35/BxxG)Belt Size: 10 x 330mmAir Consumption: 17cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.8kg

BModel No. New SA635

B

E

Variable Speed Belt Sander400W/230V

Ideal for use in body shops sanding otherwiseinaccessible areas, such as around door-shuts. Featuresthree different sanding arms to suit the working area.Self-contained dust collection bag to fit exhaust. Variablespeed power control. Belt tension release lever for simpleremoval/replacement. Supplied in tough storage/carry-case.See page 565 for replacement belt model numbers.Belt Sizes: 6 x 456mm, 12 x 456mmMotor Power: 400WSupply: 230V - 5ANo Load Speed: 900-1400rpmWeight: 1.45kg

EModel No. New SBS35

C

Section 12 Air Flat Bed & Belt Sanders532

D

Ø180mm

C

Ø180mm

Sander Polisher

Pinstripe Removing Tool

Ingenious tool saves time when removing pinstripes ordouble-sided tape from panel work prior to refinishing.Lightweight, aluminium housing fitted with safetytrigger powers special composite pad.Pad Size: Ø88 x 16mmFree Speed: 4000rpmAir Consumption: 9cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.9kgReplacement Pad: SA95/PX

EModel No. SA95

Deluxe Stripe Removing Pad

Toothed cutting edges rapidly remove pinstripes ordouble-sided tape prior to refinishing. Large diameter andincreased width ensure extended life and make this padideal for the busy body shop. Suitable for use with SA95.Pad Size: Ø100 x 27mm

FModel No. SA95PXPLUS

F

E

Ø88mm

Dust-Free Long Bed Air Orbital Sander

High quality air tool manufactured in the EU. All internal components are chromed orare resistant to rust for long, trouble-free operation. Requires no oil mist air supply,reducing contamination of prepared surfaces. Just lubricate when laying up tool forthe weekend or prolonged periods and run out oil before starting work.

Pad Size: 400 x 70mmFree Speed: 8000-10000rpmOperating Pressure: 75-90psiAir Consumption: 15.2cfmAir Inlet Size: 1/4”BSPVac Outlet Ø: 28mmWeight: 2.8kg

BModel No. MA407AS

B

Twin Piston In-Line Long Bed Air Sander

Twin piston configuration powers base plate on both forward and backward strokes.Twin piston arrangement also reduces vibration for comfortable operation. W ellbalanced aluminium housing and base plate. Accepts 115mm papers or sheets andis suitable for heavy body shop use.

Pad Size: 400 x 70mmStroke: 25mmFree Speed: 2400spmAir Consumption: 8cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 3.0kg

AModel No. SA32

A

400 x 70mm 400 x 70mm Dust-Free


Polished and well balanced aluminium body with two side handle mounting positions.Precision made bevel gears give quiet and smooth operation at speeds suitablefor sanding. Trigger operated throttle control. Supplied with backing pad.

Pad Size: Ø180mmThread Size: 5/8”UNCFree Speed: 4500rpmAir Consumption: 7cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.0kg

CModel No. SA18/S

180mm Air Angle Polisher

Polished and well balanced aluminium body with two side handle mounting positions. Precision made bevel gears give quiet and smooth operation. Triggeroperated throttle control. Suitable for polishing and compounding. Supplied withbacking pad.Pad Size: Ø180mmThread Size: 5/8”UNCFree Speed: 2500rpmAir Consumption: 5.3cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 2.0kg

DModel No. SA17/S

Section 12 Air Sanders & Polishers 533

Model No: Length of Lance: Air Inlet:SA9131 100mm 1/4”BSPSA9133 250mm 1/4”BSPSA9135 330mm 1/4”BSPSA9137 500mm 1/4”BSP

Palm Type Air Blow Guns

Die-cast metal body with moulded handle and hangingpoint. Palm type gun with thumb trigger control.

Model No: SA913Air Inlet: 1/4”BSP

Model No: New SA913MLength of Lance: 180mmAir Inlet: 1/4”BSP

Model No: New SA913LLength of Lance: 290mmAir Inlet: 1/4”BSP

C

D

Long Reach Air Blow Guns

Trigger operated blow gun with extended lance. Fitted with brass air inlet ferrule.Suitable for quick removal of chips, dust and particulate from any surface. Ideal foruse in the workshop or body shop. Long lance allows projection of airflow directly torequired area. Fitted with safety nozzle. Maximum operating pressure 110psi.

Model No. SEE BELOW

E

G

C

Air Blow Gun Kit 4pc

Composite valve body with interchangeable nozzlesand safety tip. Includes 100 and 300mm extensions,gun body, blanking plug and safety nozzle.

Length of Lance: 100/300mmAir Inlet: 1/4”BSP

FModel No. SA914

F

A

Pistol Type Blow Gun withExtended Lance

Die-cast metal body with moulded handle and hangingpoint.

Length of Lance: 200mmAir Inlet: 1/4”BSP

GModel No. SA919

Safety nozzles are fitted to all ourlong reach air blow guns andprevent serious personal injury .Side vents allow air to escape inthe event of main nozzle exitbeing covered.

A

Air Blow Gun

Die-cast metal body with moulded handle and hangingpoint. Fitted with short type safety nozzle for bench topuse.Air Inlet: 1/4”BSP

DModel No. SA334

3

1

1

2

3

4

1

2

4

1

2

3

Flexible Air Blow Guns

Trigger operated extended blow guns featuring flexible lances for use in obstructedareas. Fitted with brass inlet ferrule. Suitable for quick removal of chips, dust andparticulate from any surface. Ideal for use in the workshop or body shop.

Model No: Lance Length: Air Inlet:SA9131F 100mm 1/4”BSPSA9133F 200mm 1/4”BSPSA9135F 300mm 1/4”BSPSA9137F 500mm 1/4”BSP


B

1

2

3

4


Air Blow Gun

Die-cast metal body with moulded handle and hangingpoint. Fitted with short type safety nozzle for bench topuse. Supplied with quick coupling.

Air Inlet: 1/4”BSP

EModel No. SA304

2

3

Section 12 Air Blow Guns534

1234

Air Staple Gun 10-25mm

Professional air stapler with lightweight aluminiumbody and rubber grip handle. Safety trigger device toprevent accidental firing of staples. Supplied in storagecase with oiler and starter pack of staples.

Staple Capacity: 10-25mm 18SWGMaximum Pressure: 100psiAir Inlet Size: 1/4”BSPWeight: 1.3kg

AModel No. SA789

A

Air Nail Gun 10-50mm

Professional air nailer with lightweight aluminium bodyand rubber grip handle. Safety trigger device toprevent accidental firing of nails. Incorporates quickjam release mechanism. Supplied in storage case withoiler and starter pack of nails.

Nail Capacity: 10-50mm 18SWGMaximum Pressure: 120psiAir Inlet Size: 1/4”BSPWeight: 1.4kg

BModel No. SA791

Combination Air Nail/StapleGun

Professional air nail/staple gun with lightweightaluminium body and rubber grip handle. Safety triggerdevice to prevent accidental firing of nails and staples.Supplied in storage case with oiler and starter pack ofnails and staples.Nail Capacity: 10-50mm 18SWGStaple Capacity: 10-40mm 18SWGMaximum Pressure: 120psiAir Inlet Size: 1/4”BSPWeight: 1.6kg

CModel No. SA792

18 Gauge Nails

Model No: Length Pack Applications:mm: Qty:

SAAN1810 10 5000 SA791, SA792SAAN1815 15 5000 SA791, SA792, SA793SAAN1820 20 5000 SA791, SA792, SA793SAAN1825 25 5000 SA791, SA792, SA793SAAN1830 30 5000 SA791, SA792, SA793SAAN1832 32 5000 SA791, SA792, SA793SAAN1835 35 5000 SA791, SA792, SA793SAAN1840 40 5000 SA791, SA792, SA793SAAN1845 45 5000 SA791, SA792, SA793SAAN1850 50 5000 SA791, SA792, SA793

Model No. Not Illustrated SEE BELOW

18 Gauge Staples

Model No: Length Crown Pack Applications:mm: mm: Qty:

SAAS1810 10 5.7 5000 SA789, SA792SAAS1813 13 5.7 5000 SA789, SA792SAAS1816 16 5.7 5000 SA789, SA792, SA793SAAS1819 19 5.7 5000 SA789, SA792, SA793SAAS1825 25 5.7 5000 SA789, SA792, SA793SAAS1828 28 5.7 5000 SA792, SA793SAAS1832 32 5.7 5000 SA792, SA793SAAS1835 35 5.7 5000 SA792, SA793SAAS1838 38 5.7 5000 SA792, SA793SAAS1840 40 5.7 5000 SA792, SA793


Air Nail/Staple Gun Kit includingCompressor & Hose

The most economical way to purchase an air nail/staplegun kit. Comprises our Model No. SA2306 Compressor,SA335 Coiled Air Hose and SA792 Nail/Staple Gun.Compressor can also be used with any of our air brushes(see page 474) or tyre inflators (see pages 321 to 323).

Motor Output: 1.0hpVoltage/Phase: 230V - 1phInput Current: 3.5ANoise Level: 78dB.AAir Displacement: 4.5cfmMaximum Free Air Delivery: 4.0cfmTank Capacity: 6ltrMaximum Pressure: 115psi/8bar

EModel No. SA3006

E

B C

D

Combination Air Nail/StapleGun

Professional air nail/staple gun with lightweightaluminium housing and ergonomically designed rubbergrip handle. Safety trigger device to prevent accidentalfiring. Adjustable wheel to control depth. Easy sideload magazine. Supplied in storage case with oiler .

Nail Capacity: 15-50mm 18SWGStaple Capacity: 16-40mm 18SWGMaximum Pressure: 120psiAir Inlet Size: 1/4”BSPWeight: 1.6kg

DModel No. SA793

F

Professional Silicon-Free RubberAir Hoses

Top quality rubber air hoses manufactured to ISO2398.Cut into pre-set lengths and fitted with female swivel1/4”BSP unions on both ends. Guaranteed silicon-freefor use in the body shop.Model No: Bore: Length:AH5R 8mm(5/16”) 5mtrAH10R 8mm(5/16”) 10mtrAH15R 8mm(5/16”) 15mtrAH20R 8mm(5/16”) 20mtr


IMPORTANT SAFETY WARNING!Always wear eye or face protection when using thesetools! For a full range of goggles, visors, gloves and ear defenders, plus other safety equipment, see pages 707 to 717 of this catalogue.

Section 12 Air Nailers/Staplers 535

Coupling Bodies Female Thread

Free airflow rate at 100psi(7bar) : 35-42cfm(991-1133ltr/min).

Model No: Type: Thread Size: Pack Qty:AC13 Female Thread 1/4”BSP 1 Card of 1pcACP13 Female Thread 1/4”BSP 5 Cards of 1pcAC13BP Female Thread 1/4”BSP 50pc

Model No. SEE BELOW

Coupling BodiesMale Thread


Model No: Type: Thread Size: Pack Qty:AC01 Male Thread 1/4”BSPT 1 Card of 1pcACP01 Male Thread 1/4”BSPT 5 Cards of 1pcAC01BP Male Thread 1/4”BSPT 50pc


A

B

Standard Air Line Couplings

Manufactured in the UK, these fittings are the bestmoney can buy. Ideal for general workshop use withall types of wrenches, sanders and grinders. Adaptorswill fit Vertex slim type coupling bodies.

Air Tool Coupling Kit

Kit comprising female threaded coupling body andmale threaded adaptor. Fitted with 1/4”BSP threads.Suitable for most air tool applications.

Thread Size: 1/4”BSPPack Qty: 1 Card of 1 Set

LModel No. AC61

L

Screwed AdaptorsMale Thread


Model No: Type: Thread Size: Pack Qty:AC04 Male Thread 1/4”BSPT 1 Card of 5pcACP04 Male Thread 1/4”BSPT 3 Cards of 5pcAC04BP Male Thread 1/4”BSPT 100pcAC19 Male Thread 3/8”BSPT 1 Card of 5pc


C

D

Screwed AdaptorsFemale Thread




Hose Tail Piece Adaptors


Model No: Type: Hose Size: Pack Qty:AC20 Hose Tail 3/16” Bore 1 Card of 5pcAC06 Hose Tail 1/4” Bore 1 Card of 5pcAC21 Hose Tail 5/16” Bore 1 Card of 5pcAC07 Hose Tail 3/8” Bore 1 Card of 5pc


Double-Ended Hose Connectors


Model No: Hose Size: Pack Qty:AC10 1/4” Bore 1 Card of 5pcAC50 5/16” Bore 1 Card of 5pcAC11 3/8” Bore 1 Card of 5pcAC51 1/2” Bore 1 Card of 2pc


F

Double Union

Type: Male ThreadThread Size: 1/4”BSPTPack Qty: 1 Card of 5pc

HModel No. AC12

H I

Union Nuts

Model No: Thread Size: Pack Qty:AC48 1/4”BSP 1 Card of 5pcAC49 3/8”BSP 1 Card of 5pcAC52 1/4”BSP 1 Card of 3pcAC52 fits AC46 only



Kit comprising male threaded coupling body togetherwith male and female screwed adaptors. Fitted with1/4”BSP threads. Suitable for most air tool applications.

Thread Size: 1/4”BSPPack Qty: 1 Card of 1 Set

GModel No. AC60

G

Screwed Hose Tail Pieces


Model No: Thread Size: Hose Size: Pack Qty:AC38 1/4”BSPT 3/16” Bore 1 Card of 5pcAC08 1/4”BSPT 1/4” Bore 1 Card of 5pcAC39 1/4”BSPT 5/16” Bore 1 Card of 5pcAC09 1/4”BSPT 3/8” Bore 1 Card of 5pcAC40 1/4”BSPT 1/2” Bore 1 Card of 5pcAC41 3/8”BSPT 3/8” Bore 1 Card of 5pcAC42 3/8”BSPT 1/2” Bore 1 Card of 5pc

JModel No. SEE BELOW

J

Cone Hose Tail Pieces


Model No: Hose Size: Union Nut Size: Pack Qty:AC44 1/4” Bore 1/4”BSP 1 Card of 5pcAC45 5/16” Bore 1/4”BSP 1 Card of 5pcAC46 3/8” Bore 1/4”BSP 1 Card of 5pc


K

E

B

Section 12 Air Line Couplings536

Vertex Slim Coupling BodiesMale Thread


Model No: Type: Thread Size: Pack Qty:AC16 Male Thread 1/4”BSPT 1 Card of 1pcACP16 Male Thread 1/4”BSPT 5 Cards of 1pcAC16BP Male Thread 1/4”BSPT 50pc

ASafetyAir Line Couplings.

Two-stage, self-venting release system enhancingworkshop safety . Conforms to ISO4414:1998 andEN983:1996. Compatible with PCL standard adaptors.


B

Vertex Slim Coupling BodiesFemale Thread




Vertex Slim Air Line Couplings

Slim profile bodies suitable for trailing hoseapplications such as portable garage and workshoptools. Compatible with standard coupling adaptors.

Heavy-Duty High FlowAir Line Couplings

Suitable for applications where greater airflow ratesare required. Ideal for industrial applications and foruse on heavy portable tools such as 3/4” and 1” airimpact wrenches.

Heavy-Duty Hose Tail PieceAdaptors

Compatible only with heavy-duty coupling bodies. Free airflow rate at 100psi(7bar) : 100-120cfm(2832-3398ltr/min).

Model No: Hose Size: Pack Qty:AC27 1/2” Bore 2pcAC28 3/8” Bore 2pc


E

Heavy-Duty Coupling Bodies

Compatible only with heavy-duty coupling adaptors. Free airflow rate at 100psi(7bar) : 100-120cfm(2832-3398ltr/min).

Model No: Type: Thread Size: Pack Qty:AC23 Male Thread 1/2”BSPT 1pcAC22 Female Thread 1/2”BSP 1pc


F

Vertex Slim Y-Coupling Body

Split air supply into two outlets. V ertex slim couplingbodies of fer reduced physical bulk of fitting overtraditional Y-couplings. Compatible with standardcoupling adaptors. Free airflow rate at 100psi(7bar):35-42cfm(991-1133ltr/min).

Type: Y-CouplingPack Qty: 1pc

DModel No. AC55

D

Heavy-Duty Screwed Adaptors

Compatible only with heavy-duty coupling bodies.Free airflow rate at 100psi(7bar) : 100-120cfm(2832-3398ltr/min).

Model No: Type: Thread Size: Pack Qty:AC25 Male Thread 3/8”BSPT 2pcAC26 Male Thread 1/2”BSPT 2pcAC24 Female Thread 3/8”BSP 2pc


G

C

IMPORTANT NOTEEuropean standards currently being introduced mean thread classificationshave changed as follows:BSP Parallel = RpBSPT Taper = RIt is recommended that female threadsare Parallel (Rp) and male threads areTaper (R) for best fit.

i

Safety Coupling Bodies

Free airflow rate at 100psi(7bar) : 35-42cfm(991 -1133ltr/min).Model No: Type: Thread Size: Pack Qty:AC56 Male Thread 1/4”BSPT 1 Card of 1pcAC57 Female Thread 1/4”BSP 1 Card of 1pc


Section 12 Air Line Couplings 537

On-Gun Air Lubricator

Oil mist lubrication for all 1/4”BSP inlet tools. Use withSealey air tool oil for best results. Supplied with filler bottle.Maximum Pressure: 120psi

FModel No. SA111

F


Kit comprises male threaded coupling body togetherwith male and female adaptors. Fitted with 1/4”BSPthreads. Suitable for most air tool applications.

Thread Size: 1/4”BSPPack Qty: 1 Set

LModel No. ACX60

L

High Flow Air Line Couplings

High Flow Coupling Bodies

Compatible only with high flow coupling adaptors.Free airflow rate at 100psi(7bar) : 100-120cfm(2832-3398ltr/min).Model No: Type: Thread Size: Pack Qty:AC30 Male Thread 1/4”BSPT 1pcAC32 Male Thread 3/8”BSPT 1pcAC29 Female Thread 1/4”BSP 1pcAC31 Female Thread 3/8”BSP 1pc


A

High Flow Screwed Adaptors

Compatible only with high flow coupling adaptors. Free airflow rate at 100psi(7bar) : 100-120cfm(2832-3398ltr/min).Model No: Type: Thread Size: Pack Qty:AC34 Male Thread 1/4”BSPT 2pcAC33 Female Thread 1/4”BSP 2pc


B

B

High Flow Hose Tail PieceAdaptors

Compatible only with high flow coupling adaptors. Free airflow rate at 100psi(7bar) : 100-120cfm(2832-3398ltr/min).Model No: Hose Size: Pack Qty:AC35 5/16” Bore 2pcAC36 3/8” Bore 2pcAC37 1/2” Bore 2pc


Z-Swivel AirConnector/Regulator

Suitable for all air tools with 1/4”BSP connection.Swivel assembly gives greater freedom of movementto tool when connected to air line. Fitted with air valvefor extra control over speed of power tool.Air Inlet Size: 1/4”BSP - FemaleAir Outlet Size: 1/4”BSPT - Male

DModel No. SA900

D

E

Coupling Body Male Thread

Free airflow rate at 100psi(7bar) : 35-42cfm(991-1133ltr/min).Model No: Type: Thread Size: Pack Qty:ACX01 Male Thread 1/4”BSPT 1pcACX01BP Male Thread 1/4”BSPT 25pc


Economy Air Line Couplings

Economy fittings, compatible with UK style couplings. Ideal for general workshop use with all types of air tools. Good value for money.Model No. SEE BELOW

G

Coupling Body Female Thread

Free airflow rate at 100psi(7bar) : 35-42cfm(991-1133ltr/min).Model No: Type: Thread Size: Pack Qty:ACX13 Female Thread 1/4”BSP 1pcACX13BP Female Thread 1/4”BSP 25pc


Y-Adaptor Twin Coupling Bodies

Free airflow at 100psi(7bar) : 40-50cfm(1132-1416ltr/min).Pack Qty: 1pc

KModel No. ACX55

K

G L-

HScrewed Adaptor Male Thread

Free airflow at 100psi(7bar) : 40-50cfm(1132-1416ltr/min).Model No: Type: Thread Size: Pack Qty:ACX04 Male Thread 1/4”BSPT 5pcACX04BP Male Thread 1/4”BSPT 50pc


I

Screwed Adaptor Female Thread

Free airflow at 100psi(7bar) : 40-50cfm(1132-1416ltr/min).Model No: Type: Thread Size: Pack Qty:ACX18 Female Thread 1/4”BSP 5pcACX18BP Female Thread 1/4”BSP 50pc

Model No. SEE BELOW

J

J

C




EModel No. SA901

Section 12 Air Line Couplings538

Regulators & Filter Regulators

Heavy-duty aluminium alloy valve assemblies. Integral filters and water traps on filter regulators. Airflow controlknob can be locked in position to prevent accidental adjustment of pressure. SA2FR, SA3FR, SA4FR/38 andSA5/RG/14 feature large gauges, dual marked in psi and bar. Individual compressed air outlets are fitted with shut-offvalve. Filter regulators are suitable for direct mounting onto compressors or can be plumbed into air line runs.

Model No: SA5/RG/14 SA5R SA4FR/38 SA2FR SA3FR SA4FRMaximum Air Input: 174psi 174psi 174psi 174psi 174psi 174psiMaximum Air Output: 174psi 174psi 174psi 174psi 174psi 174psiSafe Working Pressure: 30-120psi 30-120psi 0-115psi 0-115psi 30-120psi 30-120psiMaximum Air Flow: 76cfm 70cfm 76cfm 76cfm 76cfm 76cfmInlet Thread: 1/4”BSP 1/2”BSP 3/8”BSP 1/2”BSP 1/2”BSP 1/2”BSPOutlet Thread: 1/4”BSP 1/4”BSP 1/4”BSP 1/4”BSP 1/4”BSP 1/4”BSPOutlet Qty: 1 1 2 2 2 2

Model No. SEE BELOWA

B D F

C

A B C D E F

A F-

FilterRegulatorLubricator

Model No: SA2001 SA2001/FR SA2001/F SA2001/LPort Size: 1/2”BSP 1/2”BSP 1/2”BSP 1/2”BSPMaximum Supply Pressure: 150psi 150psi 150psi 150psiMaximum Outlet Pressure: 125psi 125psi 125psi 125psiMaximum Air Flow*: 28cfm 28cfm 28cfm 28cfm

*Supply Pressure of 100psi

H I J

FilterRegulator

Regulator

Regulator

FilterRegulator Filter

RegulatorFilter

RegulatorFilter

Regulator

Filter Lubricator

G H I J

E

G

WorkshopFilters/Regulators/Lubricators

Suitable for most workshop air supply set-ups. Die-castcontrol heads with clear polycarbonate bowls. Regulatorassembly features locking control knob for pre-settingair pressure and large, easy-to-read pressure gauge.Filter is fitted with automatic drain tap. Lubricatorincludes oil/air mix control and sight glass. Filter andlubricator are fitted with protection bowl cage. Suppliedwith 1/2” Male - 1/4” Female adaptors and wall bracket.


J-

Section 12 Filters/Regulators/Lubricators 539

Air Tool Oil

Maintain your air tools with a quality high performanceair tool oil containing mineral lubricants and detergents.Model No: Pack Qty: Size:ATO/500 12 500mlATO500S 1 500mlATO/1000 12 1ltrATO1000S 1 1ltr

G

C

HEAVY DUTY

Filter

HEAVY DUTY

D

E

Regulator

G

Fittings

Model No: Type:SA1/1212 1/2”BSPT Male to 1/2”BSPT MaleSA1/1214F 1/2”BSPT Male to 1/4”BSP FemaleSA1/1414 1/4”BSPT Male to 1/4”BSPT MaleSA1/1238F 1/2”BSPT Male to 3/8”BSP FemaleSA1/3814F 3/8”BSPT Male to 1/4”BSP FemaleSA1/1234 1/2”BSPT Male to 3/4”BSP FemaleSA1/3412F 3/4”BSPT Male to 1/2”BSP Female


F

COMPRESSORSFor our full range of Mobile and Stationary Compressorsfor garage, body shop and industrial applications, seepages 549 to 556.

B

HEAVY DUTY

HEAVY DUTY

Lubricator

HEAVY DUTY

A

FilterRegulator

FilterRegulatorLubricator

Heavy-Duty Air Filters/Regulators/Lubricators

Suitable for workshop air supply set-ups. Regulator assemblies feature locking control knob for pre-setting airpressure, pressure gauge and manual 1/8”BSP female drain facility. Lubricator includes oil/air mix control andsight glass. Filter and lubricator are fitted with metal bowl cages for protection.

Model No: SA106 SA106FR SA106F SA106L SA106RPort Size: 1/4”BSP 1/4”BSP 1/4”BSP 1/4”BSP 1/4”BSPMaximum Supply Pressure: 150psi 150psi 150psi 150psi 150psiMaximum Outlet Pressure: 125psi 125psi 125psi 125psi 125psiMaximum Air Flow*: 60cfm 70cfm 53cfm 60cfm 88cfm*Supply pressure of 100psi.

Model No. SEE BELOW

A B C D E

A E-

Model No. SEE BELOW

Section 12 Filters/Regulators/Lubricators540

C

E

D

Filter

Auto DrainFilter Regulator

High Flow

Auto DrainFilter

High Flow

High Flow

A B

FilterRegulatorLubricatorHigh Flow

High Flow

FilterRegulator

F

Lubricator

High Flow

EXTRA

DUTY HEAVY

EXTRA

DUTY HEAVY

EXTRA

DUTY HEAVY

G

High Flow

Regulator

EXTRA

DUTY HEAVY

Extra-Heavy-Duty Air Filters/Regulators/Lubricators - High Flow

Suitable for industrial workshop air supply set-ups where high flow applications are required. Regulatorassemblies feature locking control knob for pre-setting air pressure and large easy-to-read pressure gauges.Filters available with manual or auto 1/8”BSP female drain facility. Lubricator includes oil/air mix control andsight glass. Filters and lubricator are fitted with metal bowl cages for protection.

Model No: SA206 SA206FR SA206FRAD SA206F SA206FAD SA206L SA206RPort Size: 1/2”BSP 1/2”BSP 1/2”BSP 1/2”BSP 1/2”BSP 1/2”BSP 1/2”BSPMaximum Supply Pressure: 150psi 150psi 150psi 150psi 150psi 150psi 150psiMaximum Outlet Pressure: 125psi 125psi 125psi 125psi 125psi 125psi 125psiMaximum Air Flow*: 105cfm 140cfm 140cfm 140cfm 140cfm 175cfm 210cfm*Supply Pressure of 100psi.

Model No. SEE BELOW

A B C D E F G

EXTRA

DUTY HEAVY

EXTRA

DUTY HEAVY

EXTRA

DUTY HEAVY

A G-

H

Heavy-Duty Coupling Bodies & Screwed Adaptors

Compatible only with heavy-duty coupling adaptors. Freeairflow at 100psi(7bar) : 100-120cfm(2832- 3398ltr/min).Model No: Type: Thread Size: Pack Qty:

AC22 Female Thread 1/2”BSP 1pcAC23 Male Thread 1/2”BSPT 1pcAC24 Female Thread 3/8”BSP 2pcAC25 Male Thread 3/8”BSPT 2pcAC26 Male Thread 1/2”BSPT 2pc


Section 12 Filters/Regulators/Lubricators 541

1

2

3

4

12344

Pull on pipe to check secure.

To disconnect, depressurise system, push collar and remove . The fitting and pipe may be reused.

Fast Fit Air Supply Ring Main System

Install your own workshop compressed air ring mainquickly and easily with the Sealey system of fast fitcompressed air fittings.A professional compressed air system can be installedquickly and easily, considerably reducing the need forspecialist staf f and with extensive disruption anddowntime reduced to a minimum.Lightweight yet strong acetal copolymer fittings and nylonpipe runs make handling and assembling the system fareasier than an equivalent system in galvanized steel. Thesystem is: Quick to install - save up to 40% in time and cost. Safe, secure and leak proof. Simple to reconfigure. Lightweight and easy to handle. Corrosion resistant and maintenance free.Simple push action pipe fittings do away with preparingthreaded tubes or applying solvents. Installed systemsare immediately ready for use. Complex pipe and fittingconfigurations are also assembled more rapidly since thefittings can be disassembled and reconfigured in a flash.

Simple To Assemble

Installation GuidelinesFor a comprehensive set of installation guidelines andrecommendations, contact our technical department on01284 757505. As with all installation work a certain level of technical competence is required.Refer to 'Approved Code of Practice - Safety of Pressure Systems' available from HMSO.

Cut pipe to size.

Push firmly into chosen fitting.

System can be connected to existing ring main even ifmade of galvanized steel.

Technical Specification

Working Temperature RangeMinimum Working Temperature: -20°CMaximum Working Temperature: +70°CThe above specification refers to use with compressedair.Working PressureThis system is suitable for the following temperaturesand pressures:Temperature: Pressure:+23°C: 10bar+70°C: 7barThe above ratings are for air. For use with other fluidsor at other temperatures and pressures please consultour technical sales department.Pipe TypesThese fittings are intended for use with Sealey nylonpipe but are also suitable for use with a wide range ofplastic and soft metal pipes including UPVC, ABS,polyethylene, nylon, mild steel and copper to thetolerances set out below. Soft plastic pipe, such as nylonto have a minimum wall thickness of 1.5mm. The pipeshould have a good quality surface and be damage-free.Pipe TolerancesThese fittings are intended for pipes with outside diameters to the following tolerances:Size: 15mm & 22mm ODTolerance: +0.05 to -0.10mm OD

Torque ValuesThe following maximum torque values should beapplied:Size: 1/2” 3/4”Plastic Threads: 3.0Nm 4.0NmMetal Threads: 4.0Nm 5.0NmMaterial SpecificationThe fittings are made up of three components:Bodies are produced in strong engineering plastic orin brass. O-rings are nitrile rubber . Collets are produced in acetal copolymer with stainless steel teeth.ApplicationsPipe and fittings should be kept clean and undamagedbefore use. These products are designed for use with air.For other applications please contact our technical salesdepartment.

Illustration purposes only

A

Pipe Clips

Secure pipework to wall.

Model No: Pack Qty: Pipe OD:CAS15PC 20 15mmCAS22PC 20 22mm


B

C

Pipe Clip Spacer

Provides additional distance between pipe and wall.Use with pipe clips.

Pack Qty: 20

CModel No. CASS

A

A

B

AB

Nylon Pipes

Rigid nylon air pipe suitable for all Sealey ring mainfittings.

Model No: Pack Qty: Pipe OD: Length:CAS15NP 5 15mm 3mtrCAS22NP 5 22mm 3mtr


Section 12 Fast Fit Air Supply System542

Straight Connectors

Equal connector for nylon pipe.

Model No: Pack Qty: Pipe OD:CAS15SC 5 15mmCAS22SC 5 22mm


A

Equal Elbows

90° Elbow with equal pipe fittings.

Model No: Pack Qty: Pipe OD:CAS15EE 5 15mmCAS22EE 5 22mm


B

Equal Tees

Divide main pipe run.

Model No: Pack Qty: Pipe OD:CAS15ET 5 15mmCAS22ET 5 22mm


C

D E

Stem Adaptors

Converts coupling to male thread.

Model No: Pack Qty: Pipe OD: Thread:CAS15STA 2 15mm 1/2”BSPCAS22STA 2 22mm 3/4”BSP


F

Line End Plugs

Caps end of pipe.

Model No: Pack Qty: Tube OD:CAS15P 5 15mmCAS22P 5 22mm


G

Stem Elbows

Provides a simple return or can be swivelled in anydirection.Model No: Pack Qty: Pipe OD:CAS15SE 2 15mmCAS22SE 2 22mm


H I

Porting Block 5 x 1/2”BSPConnector

Five-way junction block with 1/2”BSP connections.Supplied with three blanking plugs.

Pack Qty: 1Connection: 5 x 1/2”BSP

MModel No. CASPB

MHC HC

22mm Equal Water Trap Tee

Stops water reaching air tools, spray guns, etc.

Pack Qty: 1Pipe OD: 22mm

JModel No. CAS22WTT

J

Brass Straight Adaptors

Converts pipe end to male thread.

Model No: Pack Qty: Pipe OD: Stem OD:CAS15BSA 1 15mm 1/2”BSPTCAS22BSA 1 22mm 3/4”BSPT


K

Brass Wingback Elbows

Secures termination of pipe run at workstation.

Model No: Pack Qty: Pipe OD: Thread:CAS15BWE 1 15mm 1/2”BSPCAS22BWE 1 22mm 3/4”BSP

LModel No. SEE BELOW

L

22-15mm Reducing Tee

Suitable for making drops from ring main to workstations.

Pack Qty: 5Pipe OD: 22mmStem OD: 15mm

DModel No. CAS2215T

Straight Adaptors

Converts pipe end to male thread.

Model No: Pack Qty: Pipe OD: Thread:CAS15SA 2 15mm 1/2”BSPCAS22SA 2 22mm 3/4”BSP


22-15mm Reducer

Reduces 22mm coupling to 15mm stem.

Pack Qty: 2Pipe OD: 22mmStem OD: 15mm

IModel No. CAS2215

Section 12 Fast Fit Air Supply System 543

Section 12 Retractable Air Hose Reels544

12mtr Retractable Air Hose ReelØ6mm ID

Hose Length: 12mtrHose Size (ID/OD): 6/10mmMaximum Pressure: 150psiInlet-Outlet: 1/4”BSP

DModel No. SA892

D 12mtr

HEAVY

DUTY

6mmID



Model No. SA810

Workshop SeriesRetracting Air Hose Reels

Rugged composite body design retracting air hosereels. Polyurethane hose with 1/4”BSP female inletsand 1/4”BSPT male outlets. Supplied with mountingbracket for fixing to wall or ceiling.

A

8mtr Retractable Air Hose Reel Ø8mm ID


CModel No. SA813

C

9mtr Retractable Air Hose Reel Ø8mm ID


EModel No. SA893

E

6mtr

6mmID

8mtrA C-



BModel No. SA812



GModel No. SA895

Heavy-Duty Retracting AirHose Reels

Hard wearing, composite cased, retracting air hosereels supplied with heavy-duty hose. Reels featureratchet or free running operation and are supplied withwall/ceiling mounting brackets.

G 10mtr

HEAVY

DUTY

10mmID

8mmID

D G-

A



FModel No. SA894

F

AUTO-RETRACTINGELECTRICAL CABLE

REELSSee page 444 for our fullrange of Auto-RetractingElectrical Cable Reels.

6mmID

10mtrB

9mtr

HEAVY

DUTY

8mmID

15mtr

HEAVY

DUTY

8mmID

F

Section 12 Retractable Air Hose Reels 545

Optional MountingPlates for SA84, SA841 & SA85

Optional wall or ceiling swivel mountingplates for use with SA84, SA841 andSA85.

Model No: Type:SA85PB Pivot Base 340°SA85SP Swivel Plate

Retracting Cable Reels230V

The ideal solution for workshops dogged by the problemof trailing wires, can be wall or ceiling mounted. The cableis retracted by a simple pull and release action. Fitted withmanual thermal trip switch to prevent overload.

Model No: CRM10 CRM15Voltage: 230V 230VCable Length: 10mtr 15mtrCable Section: 3 x 1.5mm² 3 x 1.5mm²Thermal Trip: Capacity Wound: 1000W 1000WCapacity Unwound: 2000W 2000W

E F-

J

K

Retractable Air Hose Reels - Steel

Heavy-duty steel construction with corrosion resistant powder coated finish. Nine-position guide arm with four non-snag rollers. Multi-position ratchet lock witheasy tension adjustment. L-Shaped bracket enables the unit to be wall, floor orceiling mounted.

Model No: SA84 SA841 SA85Hose Length: 8mtr 15mtr 20mtrHose Size (ID/OD): 10/17mm 10/17mm 10/17mmMaximum Pressure: 300psi 300psi 300psiHose Type: Rubber Rubber RubberInlet-Outlet: 3/8”-1/4”BSP 3/8”-1/4”BSP 3/8”-1/4”BSP

Model No. SEE BELOW

G I-

Steel Reel

8mtr

15mtr

20mtr10mmID

10mtr

Controlled Rewind

Auto Layering

Length Control

15mtr

20mtr

30mtr

10mmID

G H I

J

Model No. SEE BELOW

J K-

K

Retract Control Air Hose Reels - Rubber Hose

Heavy-duty composite housing with wall mounted aluminium alloy swivel bracket. Fitted with high quality rubberhose. Innovative design features three key points. Hose can be extended and stopped at any length. Controlled,slow rewind which, unlike traditional retractable reels returns the air hose at a safe speed. Auto layeringmechanism distributes air hose evenly back into reel housing preventing it from jamming. Suitable for theprofessional garages/workshops.

Model No: SA821 SA822 SA823 SA824Hose Length: 10mtr 15mtr 20mtr 30mtrHose Size (ID/OD): 10/15mm 10/15mm 10/15mm 10/15mmMaximum Pressure: 250psi 250psi 250psi 250psiHose Type: Rubber Rubber Rubber RubberInlet-Outlet: 1/4”-1/4”BSP 1/4”-1/4”BSP 1/4”-1/4”BSP 1/4”-1/4”BSP


A D

A B C D

-

A D-

G I-

Model No. SEE BELOW

E 10mtr

15mtr

E F

F-or

230V

HEAVY

DUTY

Steel Case

12mtr Super-Duty Retractable Air Hose Reel Ø8mm ID - Steel

Heavyweight metal case for heavy-duty applications. Features include swivel inletcoupling, and ratchet mechanism. Wall/ceiling mounting bracket included.

Hose Length: 12mtrHose Size (ID/OD): 8/12mmMaximum Pressure: 280psiHose Type: PolyurethaneInlet-Outlet: 3/8”-1/4”BSP

AModel No. SA90

12mtr8

mmID

20mtr/10mm ID

15mtr/13mm ID

A

F

Workshop Rubber Air Hoses

Manufactured to BS51 18. Rubber alloy air hosesuitable for garage or body shop applications. Suppliedfitted with 1/4”BSP female swivel unions. Black hosesupplied in various lengths.

Model No: Bore: Length:AH5RX 8mm(5/16”) 5mtrAH10RX 8mm(5/16”) 10mtrAH15RX 8mm(5/16”) 15mtrAH20RX 8mm(5/16”) 20mtrAH5RX/38 10mm(3/8”) 5mtrAH10RX/38 10mm(3/8”) 10mtrAH15RX/38 10mm(3/8”) 15mtrAH20RX/38 10mm(3/8”) 20mtr


E

- CB

Rubber Air Hoses

Manufactured in accordance with EN2398. Rubber airhose suitable for garage and body shop applications.Supplied fitted with 1/4”BSP female swivel unions.Available with 8 or 10mm bores in various lengths.

Model No: Bore: Length:AHC5 8mm(5/16”) 5mtrAHC10 8mm(5/16”) 10mtrAHC15 8mm(5/16”) 15mtrAHC20 8mm(5/16”) 20mtrAHC538 10mm(3/8”) 5mtrAHC1038 10mm(3/8”) 10mtrAHC1538 10mm(3/8”) 15mtrAHC2038 10mm(3/8”) 20mtr

DModel No. New SEE BELOW

D

Professional Silicon-Free RubberAir Hoses

Top quality rubber air hoses manufactured toISO2398. Cut into pre-set lengths and fitted withfemale swivel unions on both ends (1/4”BSP on 8mmand 10mm Bore and 1/2”BSP on 13mm Bore).Guaranteed silicon-free for use in the body shop. Dualcolour blue/red (except 1/2”).Model No: Bore: Length:AH5R 8mm(5/16”) 5mtrAH10R 8mm(5/16”) 10mtrAH15R 8mm(5/16”) 15mtrAH20R 8mm(5/16”) 20mtrAH5R/38 10mm(3/8”) 5mtrAH10R/38 10mm(3/8”) 10mtrAH15R/38 10mm(3/8”) 15mtrAH20R/38 10mm(3/8”) 20mtrAH5R/12 13mm(1/2”) 5mtrAH10R/12 13mm(1/2”) 10mtrAH15R/12 13mm(1/2”) 15mtrAH20R/12 13mm(1/2”) 20mtr


Heavy-Duty Retractable Air Hose ReelsComposite

Tough impact resistant durable composite case with wall/ceiling mounting bracket.Fitted with high quality TPR (Thermoplastic Rubber) hose, solid brass full flow inletand outlet swivel connectors.Model No: SA88 SA8812Hose Length: 20mtr 15mtrHose Size (ID/OD): 10/18mm 13/20mmMaximum Pressure: 250psi 250psiHose Type: TPR TPRInlet-Outlet: 3/8”-1/4”BSP 1/2”-1/2”BSP

- CBModel No. SEE BELOW

B C

Section 12 Retractable Air Hose Reels & Air Hoses546

Air Leader Hoses

600mm Rubber hose for use between air tool andsupply point. Avoids vibration damage to couplings.Supplied with tail piece and 1/4”BSP female union.

Model No: Bore: Length:AH2R 8mm(5/16”) 600mmAH2R/38 10mm(3/8”) 600mm


A

Coiled Air Hoses

Polyurethane recoil type hose helps to keep working area tidy and free of hoses when not in use. Fitted with quickcoupling and coupling body or 1/4”BSP swivel unions.

Model No: Bore: Fittings: Length:SA305 5mm Quick Release 5mtrSA335 5mm 1/4”BSP Unions 5mtrAH10C/6 6mm 1/4”BSP Unions 10mtrAH10C/8 8mm 1/4”BSP Unions 10mtr


B

2

12

2

2

Self-Build Hose Clamp Sets

Select band width, cut to length and install using only a screwdriver and a pair of pliers. Never have the wrongsized hose clamp again. Set includes a length of banding and a selection of tension clamps.

Model No: Band Length: Band Width:JC97 3mtr 8mmJC972 3mtr 12.7mm

Model No. SEE BELOW

C

C D-

DC

D

1

AIR LINE COUPLINGSSee page 536 to 538for our full range ofAir Line Couplings.

IMPORTANT SAFETY WARNING!Always wear eye or face protection when using thesetools! For a full range of goggles, visors, gloves and ear defenders, plus other safety equipment, see pages 707 to 717 of this catalogue.

AIR IMPACT WRENCHESPlease see page 501 to507 for our full range of AirImpact Wrenches.

Locking Hose Clip Nut Drivers

Innovative design aids the tightening/loosening of hoseclips and ensures faster and easier work in confinedspaces. Comfortable, high-grip, textured handle and asimple lever type lock/unlock feature enables a onehanded operation.

Model No: Shaft Length: Overall Length: Socket:VS0651 75mm 185mm 7mmVS0652 175mm 285mm 7mmVS0653 380mm 490mm 7mm


E

Avialable in 3 Lengths

E E

Section 12 Air Hose Accessories 547

Section 13Compressors549 Oil Free & Direct Drive Compressors551 Direct Drive Compressors552 Belt Drive Compressors554 Premier Belt Drive Compressors

Oil Free Frame TankCompressor 3ltr 1.5hp

Ideal for use where an oil-free air delivery is requiredand especially suited to small, low pressure, touch-upand air brush spraying as well as general-purposeapplications, including air staplers/nailers. Simpleconstruction with fewer components makes this unitpractically maintenance-free. Reduced weight givesgreater portability. Compressor can be transported andeven operated on its side. Constructed with a tubularframe which also provides the air storage. This designgives a low centre of gravity, for improved stability, andprotection for the compressor unit - both importantfeatures for site use. Supplied with fully automaticpressure cut-out switch, air regulator plus tank andsupply pressure gauges. Fitted with ASTA/BSapproved non-rewirable plug.

Motor Output: 1.5hpVoltage/Phase: 230V - 1phInput Current: 5AAir Displacement: 5.0cfmMaximum Free Air Delivery: 4.3cfmTank Capacity: 3ltrMaximum Pressure: 116psi/8bar

Model No. SA22315

A

A Oil Free Direct DriveCompressor 6ltr 1.0hpB

Model No. SA9506

B

Ideal for use where an oil-free air delivery is requiredand especially suited to small low pressure, touch-upand air brush spraying applications as well as generalpurpose use. Simple construction with fewercomponents makes this unit practically maintenance-free. Reduced weight gives greater portability andcompressor can be transported and even operated onits side. Supplied with a precision welded receivertank, manufactured to meet Pressure Vessel Directive87/404/EEC, fully automatic pressure cut-out switchand air regulator with tank and outlet pressure gauges.Supplied with handle. Fitted with ASTA/BS approvednon-rewirable plug.

Motor Output: 1.0hpVoltage/Phase: 230V - 1phInput Current: 3AAir Displacement: 3.6cfmMaximum Free Air Delivery: 3.2cfmTank Capacity: 6ltrMaximum Pressure: 116psi/8bar

D

Air Nail/Staple Gun Kit includingCompressor & Hose

The most economical way to purchase an airnail/staple gun kit. Comprises SA2306 Compressor ,SA335 Coiled Air Hose and SA792 Nail/Staple Gun,which includes 1000 x 50mm nails and 1000 x 40mmstaples. Compressor can also be used with any of ourair brushes (see page 474) or tyre inflators (see pages321 to 323).

DModel No. SA3006

C

Direct Drive Compressor6ltr 1.0hp

Compact and portable, this compressor is suitable foruse with the Sealey range of air nail guns (see page535), tyre inflators (see pages 321 to 323) and airbrushes (see page 474). Fitted with twin gaugesdisplaying tank and working pressures. Features fouranti-vibration suction feet for added stability when inuse. Complies with current European standards.

Motor Output: 1.0hpVoltage/Phase: 230V - 1phInput Current: 3.5AAir Displacement: 4.5cfmMaximum Free Air Delivery: 4.0cfmTank Capacity: 6ltrMaximum Pressure: 116psi/8bar

CModel No. SA2306

Oil Free Bi-Cylindrical Compressor 3ltr 2.3hp

Bi-cylindrical pump offers superb performance and reliability . Ideal for use where an oil-free air delivery isrequired. Simple construction with fewer components makes this unit practically maintenance-free. Reducedweight gives greater portability. Frame design giving a low centre of gravity, for improved stability, and protectionof the compressor unit - both important features for site use. Pumps up to full pressure in under 10seconds.Supplied with fully automatic pressure cut-out switch, air regulator plus tank and supply pressure gauges. Fittedwith ASTA/BS approved non-rewirable plug.

Motor Output: 2.3hpVoltage/Phase: 230V - 1phInput Current: 7.4AAir Displacement: 11.6cfmMaximum Free Air Delivery: 9.5cfmTank Capacity: 3ltrMaximum Pressure: 145psi/10bar

EModel No. New SA3304

E

E

Section 13 Oil Free & Direct Drive Compressors 549

Made inEurope

Section 13 Oil Free Compressors550

AIR TOOLACCESSORIES

See pages 534, 536to 541 & 547 for afull range of Air Tool Accessories.

C

Made inEurope

A Made inEurope

Made in Europe

Model No: SA950015 SA951015 SA952515 SA955015Motor Output: 1.5hp 1.5hp 1.5hp 1.5hpVoltage/Phase: 230V - 1ph 230V - 1ph 230V - 1ph 230V - 1phInput Current: 5A 5A 5A 5AAir Displacement: 6.7cfm 6.7cfm 6.7cfm 6.7cfmMaximum Free Air Delivery: 5.9cfm 5.9cfm 5.9cfm 5.9cfmTank Capacity: - 10ltr 25ltr 50ltrMaximum Pressure: 116psi/8bar 116psi/8bar 116psi/8bar 116psi/8bar

A

Model No: SA9525Motor Output: 1.5hpVoltage/Phase: 230V - 1phInput Current: 6AAir Displacement: 6.7cfmMaximum Free Air Delivery: 6.0cfmTank Capacity: 25ltrMaximum Pressure: 116psi/8bar

E

B C D

AIR BRUSH KITSOil free compressors areideal for Sealey Air Brushkits. See page 474 for details.

SILICON FREERUBBER HOSES

See page 546for our rangeof professionalSilicon-FreeRubber Air Hoses.

See page 546for our rangeof generalpurpose RubberAlloy Air Hoses.

GENERALPURPOSE

RUBBER AIRHOSES

E

Oil Free Direct DriveCompressors

Ideal for use where an oil-free air delivery is requiredand especially suited to small low pressure, touch-upand airbrush spraying applications as well as general-purpose applications. Simple construction with fewercomponents makes these units practicallymaintenance-free. Reduced weight gives greaterportability and compressor can be transported andeven operated on its side. All models (exceptSA950015) supplied with a precision welded receivertank, manufactured to meet Pressure Vessel Directive87/404/EEC, fully automatic pressure cut-out switchand air regulator with gauge. Supplied with wheels(except SA950015) and handle. Fitted with ASTA/BSapproved non-rewirable plug.

Model No. SEE TABLE

A E-B

D

Made in Europe

F

Air Accessory Kit with 1/4”BSP Union Couplings

Pack of compressed air tools and accessories suitable for all leading makes ofcompressor. Includes high performance suction feed spray gun with compositebayonet type pot lid, tyre inflator with gauge, paraffin/detergent spray gun, air blowgun and coiled air hose. Components fitted with 1/4”BSP threaded unions.

FModel No. SA33/S

Section 13 Direct Drive Compressors 551

Direct Drive Compressors

Aluminium cylinders with cast iron liners give reducedweight and improved resistance to wear . Suitable forgeneral-purpose workshop applications. Pump headdirectly coupled to heavy-duty induction motor forreliable operation. Precision welded receiver tankmanufactured to meet Pressure V essel Directive87/404/EEC. Fitted with fully automatic pressure cut-out switch and air regulator with gauge. Supplied withhandle and wheels for easy manoeuvrability . Fittedwith ASTA/BS approved non-rewirable plug.

Model No. SEE TABLE

C

B

Model No: SA9925/2 SA9925/2.5 SA9950/2.5Motor Output: 2.0hp 2.5hp 2.5hpVoltage/Phase: 230V - 1ph 230V - 1ph 230V - 1phInput Current: 8.5A 9.5A 9.5AAir Displacement: 8.7cfm 9.5cfm 9.5cfmMaximum Free Air Delivery: 7.7cfm 8.4cfm 8.4cfmTank Capacity: 25ltr 25ltr 50ltrMaximum Pressure: 116psi/8bar 116psi/8bar 116psi/8bar

A B C

Made in Europe

Made in Europe

Made in Europe

A C-A

50ltr Direct Drive Compressor3.0hp

V-Twin pump with aluminium cylinders and cast ironliners for reduced weight and improved resistance towear. Suitable for general purpose workshopapplications. Pump directly coupled to heavy-dutyinduction motor for reliable operation. Precisionwelded receiver tank manufactured to meet PressureVessel Directive 87/404/EEC. Fitted with fullyautomatic pressure cut-out switch, air regulator andpressure gauges for tank and supply . Supplied withhandle and wheels for easy manoeuvrability . Fittedwith ASTA/BS approved non-rewirable plug.Motor Output: 3.0hpVoltage/Phase: 230V - 1phInput Current: 9.3AAir Displacement: 12.6cfmMaximum Free Air Delivery: 9.2cfmTank Capacity: 50ltrMaximum Pressure: 116psi/8bar

EModel No. SA22503

E

V-TwinPump

D Made in Europe

Direct Drive VerticalCompressor 100ltr 3.0hp

Aluminium cylinders with cast iron liners give reducedweight and improved resistance to wear . Suitable forgeneral purpose workshop applications. V-Twin pumphead directly coupled to heavy-duty induction motor forreliable operation. Precision welded receiver tankmanufactured to meet Pressure V essel Directive87/404/EEC. Fitted with fully automatic pressure cut-out switch and air regulator with gauge. Supplied withhandle and wheels for easy manoeuvrability . Fittedwith ASTA/BS approved non-rewirable plug.Motor Output: 3.0hpVoltage/Phase: 230V - 1phInput Current: 10AAir Displacement: 10.6cfmMaximum Free Air Delivery: 8.9cfmTank Capacity: 100ltrMaximum Pressure: 116psi/8barOverall Size (W x D x H): 620 x 550 x 1230mm

DModel No. SA9910/3

Section 13 Belt Drive Compressors552

A B

C

D

Model No: SA1050/3 SA1010/3 SA1015/3 SA1020/3Motor Output: 3hp 3hp 3hp 3hpVoltage/Phase: 230V - 1ph 230V - 1ph 230V - 1ph 230V - 1phInput Current: 13A 13A 13A 13AAir Displacement: 13.6cfm 13.6cfm 14.0cfm 14.0cfmMaximum Free Air Delivery: 9.9cfm 9.9cfm 10.6cfm 10.6cfmTank Capacity: 50ltr 100ltr 150ltr 200ltrMaximum Pressure: 145psi/10bar 145psi/10bar 145psi/10bar 145psi/10barOverall Size (W x D x H): 820 x 310 x 720mm 1050 x 395 x 830mm 1380 x 440 x 950mm 1400 x 420 x 1000mm

A B C D

Made in Europe

Made in Europe

SoftStart

Made in Europe

SoftStart

Made in Europe

SoftStart

SoftStart

Compressor Oil

A blend of mineral oils suitable for Sealey and otherleading brands of compressor. Supplied in 1 litre and 5litre containers.

Model No: Size: Pack Qty:CPO/1 1ltr 12CPO1S 1ltr 1CPO/5 5ltr 1


E

Belt Drive Compressors

Suitable for professional garage, body shop andindustrial applications. Soft-start system incorporatestwin capacitors and dump valve to provide additionalpunch of power and reduced back-pressure onstart-up. These features combine to allow units to bepowered by 13Amp supply . Pump units featureheavy-duty aluminium cylinders with cast iron liners fordurable and trouble free performance and are cappedby alloy heads for improved heat dissipation.Composite drive guard is designed to draw increasedlevels of cooling air over cylinder head and significantlylowers running temperature. Supplied with fullCE certification, test certificate, operating andmaintenance guidelines.

A D-Model No. SEE TABLE

Belt Drive Compressors

Suitable for professional garage, body shop andindustrial applications. Soft-start system incorporatestwin capacitors and dump valve to provide additionalpunch of power and reduced back-pressure on start-up. These features combine to allow units to bepowered by 13Amp supply. High efficiency pump unitfeatures heavy-duty aluminium cylinders with cast ironliners, for durable and trouble free performance,capped by alloy heads for improved heat dissipation.Oil bath crankcase fitted with eye glass oil levelindicator. Fully automatic electric pressure controlvalve. SA2010/3 is supplied fitted with wheels and apressure gauge. Models SA2015/3 and SA2020/3 aresuitable for fixed workshop installation and include apressure gauge. Supplied with full CE certification, testcertificate, operating and maintenance guidelines.

Model No. SEE TABLEA

B

C

Model No: SA2010/3 SA2015/3 SA2020/3Motor Output: 3hp 3hp 3hpVoltage/Phase: 230V - 1ph 230V - 1ph 230V - 1phInput Current: 13A 13A 13AAir Displacement: 13.6cfm 14.5cfm 14.5cfmMaximum Free Air Delivery: 10.5cfm 12.8cfm 12.8cfmTank Capacity: 100ltr 150ltr 200ltrMaximum Pressure: 145psi/10bar 145psi/10bar 145psi/10barOverall Size (W x D x H): 1050 x 395 x 830mm 1380 x 440 x 950mm 1400 x 420 x 1000mm

A B C

All models are fittedwith twin capacitors and repositioned dump valve toreduce current on start-up.This enables use on13Amp power supply.

A C-Made in Europe

SoftStart

Made in Europe

SoftStart

Made in Europe

SoftStart

For our full Air Tool Range see pages 501 to 535.

Section 13 Belt Drive Compressors 553

D

Air Tool Kit 2pc with Accessories

Comprises 1/2”Sq drive air impact wrench, 1/2”Sqdrive air ratchet wrench, ten 1/2”Sq drive W allDrive®

Chrome Vanadium impact sockets, in-line air oiler, airtool oil and a hex key , all in carry-case. Suitable forworkshop and body shop applications. See page 504for full details.

Model No. SA2002KIT

D

1/2”Drive

Generation Series CompositeAir Impact Wrench 1/2”Sq DriveTwin Hammer

Combination of composite materials, alloyed metals and twinhammer design result in a lightweight, durable and powerfulair impact wrench. Soft grip handle with downward facingexhaust make this wrench comfortable on the hands andears and limits the circulation of brake dust on wheelapplications. Finger tip control of power and direction via leveron rear of wrench. Suitable for professional garage use.Drive: 1/2”SqWorking/Maximum Torque: 420/500lb.ftUltimate Torque: 600lb.ftAir Consumption: 8.4cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 1.9kg

E


E

HfofsbujpoBjsUppmt

TwinHammer

1/2”Drive Composite

Section 13 Premier Belt Drive Compressors554

Premier Line Compressors

The Premier Line range of compressors is suitable forgarage, body shop and industrial applications. Featuresheavy-duty electric motors and cast iron cylinders toenable slower revving giving a longer life and higherperformance. Fully automatic pressure switches helpto keep line pressure at an optimum level. Machinesare supplied with 1/2”BSP outlet tap on the stationarymodels and a filter regulator on SA2110/3 mobile unit.All models are supplied with full CE certification, testcertificate, operating and maintenance guidelines.

A -Model No. SEE TABLE

AC

Made in Europe

SoftStart

B

C

Made in Europe

SoftStart

Made in Europe

SoftStart

270ltr Premier Belt DriveCompressor 2 x 3.0hp

High output unit suitable for garage, body shop andindustrial applications. Features tandem twin-cylindercompressors, each powered by a heavy-duty electricmotor. Fully automatic pressure switch keeps linepressure at an optimum level. Supplied with controlbox which provides automatic stepped starting toprevent supply overload. Requires a 230V 30A supply.Supplied with full CE certification, test certificate andoperation/maintenance booklet.

DModel No. SA2127/32

D

Made in Europe

Supplied with control box which providesautomatic stepped starting to prevent supplyoverload.

Premier Line for the ProfessionalPremier Line for the Professional

Model No: SA2110/3 SA2115/3 SA2120/3 SA2127/32Motor Output: 3hp 3hp 3hp 2 x 3hpVoltage/Phase: 230V - 1ph 230V - 1ph 230V - 1ph 230V - 1phInput Current: 13A 13A 13A 20AAir Displacement: 14.9cfm 14.9cfm 14.9cfm 26cfmMaximum Free Air Delivery: 12.0cfm 12.0cfm 12.0cfm 20.1cfmTank Capacity: 100ltr 150ltr 200ltr 270ltrMaximum Pressure: 145psi/10bar 145psi/10bar 145psi/10bar 145psi/10barWeight: 75kg 85kg 97kg 142kgOverall Size (W x D x H): 1050 x 395 x 830mm 1380 x 440 x 950mm 1400 x 420 x 1000mm 1470 x 500 x 1120mm

A B C D

Section 13 Premier Belt Drive Compressors 555

A

B

ANTI-VIBRATION FEETA set of four optional anti-vibration rubber feet available for all static workshop models. Reducesnoise and prevents damage to floors. Order Model No. COMP/KIT3.

C

Model No: SA3015/55 SA3020/55 SA3027/75Motor Output: 5.5hp 5.5hp 7.5hpVoltage/Phase: 415V - 3ph 415V - 3ph 415V - 3phInput Current: 8.5A 8.5A 11.6AAir Displacement: 20.4cfm 20.4cfm 31.0cfmMaximum Free Air Delivery: 15.5cfm 15.5cfm 25.0cfmTank Capacity: 150ltr 200ltr 270ltrMaximum Pressure: 160psi/11bar 160psi/11bar 160psi/11barWeight: 91kg 109kg 180kgOverall Size (W x D x H): 1380 x 440 x 950mm 1400 x 420 x 1000mm 1470 x 500 x 1120mm

A B C

Made in Europe

Made in Europe

Made in Europe

WHEEL KITAn optional conversion kit is available for wheel mounting all static compressors, except SA4025/3. Includes four fixed wheels and handle.Order Model No. COMP/KIT1.

SWIVEL WHEEL KITAll static models, except SA4025/3, may be fitted withworkshop wheel kit which includes two fixed and twoswivel wheels plus handles.Order Model No. COMP/KIT2.

COMPRESSOR OIL

See page 552 for details of our Compressor Oil.


Premier Belt-DriveCompressors 3 Phase

Premier Line heavy-duty compressor range, featurestwo 5.5hp models, suitable for garage, body shop andindustrial applications. Our top of the range 270ltr unitwith 7.5hp motor is suitable for use in larger workshopsor where more capacity is required to power high volumeor multiple air applications. Heavy-duty three-phaseelectric motors and cast iron cylinders enable slowerrevving, giving a longer life and higher performance.Includes two-stage compressor head with intercoolerunit for maximum ef ficiency. Fully automatic pressureswitches help to keep line pressure at an optimum.Supplied with 1/2”BSP outlet tap and full CE certification,test certificate, operating and maintenance guidelines.

Model No. SEE TABLE

A C-

Section 13 Premier Belt Drive Compressors556

50ltr Premier Petrol EnginedCompressor 5.5hp

Fully mobile compressor with Honda GX160 powerunit coupled to heavy-duty, twin piston, cast iron pump.Fitted with low pressure transport wheels andprotected by 360° bumper bar. Features twin gaugesand air outlet regulator. Runs on unleaded fuel.Motor Output: 5.5hpNoise Level: 83dB.AAir Displacement: 14.2cfmMaximum Free Air Delivery: 13.8cfmTank Capacity: 50ltrMaximum Pressure: 145psi/10barWeight: 63kgOverall Size (W x D x H): 800 x 400 x 750mm

AModel No. SA4050/55

A

Air Filter/Regulator/Lubricator

Suitable for industrial workshop air supply set-upswhere high volume applications are required.Regulator assembly features locking control knob forpre-setting air pressure and large easy-to-readpressure gauge. Filter with manual drain facility and1/8”BSP outlet. Lubricator includes oil/air mix controland sight glass. Filter and lubricator are fitted withmetal bowl cages for protection.Port Size: 1/2”BSPMaximum Supply Pressure: 150psiMaximum Operating Pressure: 125psiMaximum Air Flow: 105cfm

B

B

Fast Fit Air Supply Ring Main System

Install your own workshop compressed air ring mainquickly easily and competitively with the Sealeysystem of fast fit compressed air fittings.A professional compressed air system can be installedquickly and easily, considerably reducing the need forspecialist staf f and with disruption and downtimereduced to a minimum.Lightweight yet strong acetal copolymer fittings and nylonpipe runs make handling and assembling the system fareasier than an equivalent system in galvanized steel.

See pages 542 & 543 for full details

POWERED by

Made in Europe

DC Made in Europe

Made in Europe

FUEL CANS See page 380for our range of Fuel Cans.

Premier Compressed AirReceiver

Compressed air receiver manufactured to meet87/404/EEC Pressure Vessel Directive and suppliedwith test certificate. Includes fitting kit of hose, for directconnection to SA4025/3, safety valve, gauge and drainvalve. Can also be used in conjunction with otherSealey Premier compressors.Capacity: 200ltrOverall Size (H x Ø): 1600 x 452mm

Model No. SA200T

Model No. SA206

CPremier Quiet RunningCompressor 3.0hp Single Phase

Features cast iron cylinder head configuration fromPremier Line range of compressors. Compact size andquiet running features make this compressor unitsuitable for installation near or in workshop area. Noiseoutput is just 63dB.A - not much more than a washingmachine! Includes heavy-duty single-phase electricmotor with soft-start circuitry to enable smoothoperation from 13Amp supply. Integral 24 litre tank maybe supplemented by additional receiver (see SA200T).Provides both regulated and unregulated pressureoutput with glycerine filled gauges on control panel forprecise adjustment. Supplied with full CE certification,test certificate, operating and maintenance guidelines.Unit may not be converted for mobile use.Motor Output: 3.0hpVoltage/Phase: 230V - 1phInput Current: 13AAir Displacement: 14.9cfmMaximum Free Air Delivery: 12.0cfmTank Capacity: 24ltrMaximum Pressure: 145psi/10bar Weight: 110kgOverall Size (W x D x H): 700 x 620 x 1100mm

Model No. SA4025/3

D

SoftStart


FilterRegulatorLubricatorHigh Flow

EXTRA

DUTY HEAVY

Section 14Electric Power Tools558 Cordless Impact & Ratchet Wrenches560 Cordless Screwdriver & Drill/Drivers561 Cordless Hammer Drill/Drivers562 Multi-Purpose Rotary Tools & Engravers563 Hammer Drills, Saws & Router564 Angle Grinders565 Electric Sanders & Polishers568 Hot Air Guns570 Power Tool Accessories

A

Cordless Impact Wrench 19.2V1/2”Sq Drive

Powerful, compact, cordless impact wrench withforward, reverse and trigger lock control integrated intohousing for ease of use. Superbly balanced tool withvibration reducing grip. Suitable for workshopapplications. Includes 19.2Volt Ni-Cad battery packand 1 hour mains charger.

Battery: 19.2VDrive Size: 1/2”SqNo Load Speed: 2000rpmImpact Rate: 2600bpmMaximum Torque: 271Nm/200lb.ftReplacement Battery: CP1920BPWeight: 3.0kg

BModel No. CP1920

B


One of the most powerful cordless impact wrencheson the market. Produces in excess of 386Nm(285lb.ft)of torque - enough to remove wheel nuts. Forward andreverse controls integrated into housing for ease ofuse. Superbly balanced tool with vibration reducinggrip. Suitable for workshop, body shop and tyre shopapplications. Includes 19.2Volt Panasonic Ni-Cad 2Ahbattery pack and charger.

Compact and powerful motor. Electric brake reduces overrun for safer operation. 19.2Volt Panasonic rechargeable battery. 1 Hour charger with BS approved 3-pin safety plug.


CModel No. CP3001

C

386NmTorque

19.2V

203NmTorque

14.4V

271NmTorque

19.2V


One of the most powerful cordless impact wrencheson the market. Reversible battery pack gives tooladded balance when used with bulky socketry .Produces in excess of 386Nm(285lb.ft) of torque -enough to remove wheel nuts. Forward and reversecontrols integrated into housing for ease of use.Suitable for workshop, body shop and tyre shopapplications. Includes 19.2Volt Panasonic Ni-Cad 2Ahbattery pack and charger.

Compact and powerful motor. Electric brake reduces overrun for safer operation. 19.2Volt Panasonic rechargeable, reversible battery. 1 Hour charger with BS approved 3-pin safety plug.


DModel No. CP3002

D

386NmTorque

Reversible Battery Pack

Premier

Premier

E

407NmTorque

19.2V

Premier

Electric Power Tool Ranges

With our constantly expanding range we have tried tomake it easier to find products by categorising them byquality level. Read on for more information.

19.2V

Premier

Power Tool Range

Power Tool Range

Power Tool RangeCordless Impact Wrench 14.4V3/8”Sq Drive

Powerful, compact, cordless impact wrench withelectronic variable speed trigger. Forward, reverse andtrigger lock control integrated into housing for ease ofuse. Superbly balanced tool with vibration reducinggrip. Suitable for workshop applications. Includes14.4Volt Ni-Cd battery pack and 1 hour mains charger.

Battery: 14.4VDrive Size: 3/8”SqNo Load Speed: 0-2200rpmImpact Rate: 0-2900bpmMaximum Torque: 203Nm/150lb.ftReplacement Battery: CP1440BPWeight: 1.8kg

AModel No. CP1440

Traditional designs and proven workshop reliabilitydefine our Sealey range. A value for money range whichis supported by our extensive after sales operation inexactly the same way as our high end Premier range.

Our range of Premier electric power tools of fers thevery best in performance and price. We specify the veryhighest quality components and manufacturing designsto ensure a long and durable working life and areconfident that these tools offer the best value around.

Based on similar designs to our Sealey and Premierrange. These tools offer good reliability at the very bestvalue in every day electric power tools and still havethe same professional support and after sales serviceas with the rest of the Sealey range.

Cordless Impact Wrench 19.2V1/2”Sq Drive Super Torque

One of the most powerful cordless impact wrenches on the market. Produces torque in excess of407Nm(300lb.ft) - enough to remove wheel nuts.Forward and reverse controls integrated into housingfor ease of use. Suitable for workshop, body shop andtyre shop applications. Features replaceable motorbrushes and includes 19.2V olt 2Ah Ni-Cad batterypack and charger.

Compact and powerful motor. Electric brake reduces overrun for safer operation. 19.2Volt rechargeable battery. 1 Hour charger with BS approved 3-pin safety plug.


EModel No. CP3003

3/8”Drive

1/2”Drive

1/2”Drive

1/2”Drive

1/2”Drive

Section 14 Cordless Impact Wrenches558

Section 14 Cordless Impact/Ratchet Wrenches 559

Cordless Impact Wrench 24V1/2”Sq Drive Super Torque

Powerful, compact, cordless impact wrench with forwardand reverse control integrated into housing for ease ofuse. Produces torque in excess of 441Nm(325lb.ft) -enough to remove wheel nuts. Superbly balanced toolwith side handle and vibration reducing grip. Suitable forworkshop applications. Includes 24V olt Ni-Cd batterypack and 1 hour mains charger.Battery: 24VDrive Size: 1/2”SqNo Load Speed: 2000rpmImpact Rate: 2600bpmMaximum Torque: 441Nm/325lb.ftReplacement Battery: CP2400BPWeight: 3.3kg

BModel No. CP2400

Cordless Impact Wrench 19.2V1/2”Sq Drive Super Torque

The most powerful cordless impact wrench in theSealey range. Six torque settings with a maximum of542Nm(400lb.ft) - enough to remove the moststubborn wheel nut. Forward and reverse controlintegrated into housing for ease of use. Suitable forworkshop, body shop and tyre shop applications.Features replaceable motor brushes and includes19.2Volt 2Ah Ni-Cad battery pack and charger.

Compact and powerful motor. Electric brake reduces overrun for safer operation. 19.2Volt rechargeable battery. 1 Hour, auto-cut-off charger with BS approved

3-pin safety plug.Battery: 19.2VDrive Size: 1/2”SqNo Load Speed: 1800rpmImpact Rate: 2200bpmTorque Settings: 6Torque Range: 81-542Nm/60-400lb.ftReplacement Battery: CP3002BPWeight: 3.2kg

AModel No. CP3004

A B

542NmTorque

441NmTorque

24V

19.2V

Premier

C

D

In-Vehicle Chargers for 19.2VCordless Impact Wrenches

Charge the battery for the CP3001, CP3002, CP3003or CP3004 cordless impact wrench from any vehicle12Volt cigarette lighter socket whilst on the move. Theconvenient way to make sure the wrench is alwaysready to use. Cable length 1.8mtr.

Model No: Cable Length: Applications:CP3001/C-IV 1.8mtr CP3001, CP3003CP3002/C-IV 1.8mtr CP3002, CP3004

C D-Model No. SEE BELOW

CD

IMPACT SOCKETSSee pages 511 to 517 for

our range of Impact Socketsand Accessories.

A

CP3004 features 6 torque levels60/140/180/280/350/400lb.ft. 1/2”

Drive1/2”

Drive

AIR IMPACT WRENCHESFor full range of Air Impact

Wrenches See page 501 to 507.

Cordless Ratchet Wrench 14.4V3/8”Sq Drive

Powerful cordless ratchet wrench with hardened steelanvil and twist-reverse mechanism. Finger operatedtrigger incorporated in housing. Textured soft grip helpsreduce vibration. Features built-in LED work light foruse in low-light areas. Suitable for workshopapplications. Includes 14.4V Ni-Cd battery pack and 1hour mains charger.

Battery: 14.4VDrive: 3/8”SqMaximum Torque: 48Nm/35lb.ftReplacement Battery: CP2144BPWeight: 1.9kg

EModel No. New CP2144

E

3/8”Drive

1/2”Drive

14.4V

Generation Series CompositeAir Impact Wrench 1/2”Sq DriveTwin Hammer

Combination of composite materials, alloyed metalsand twin hammer design result in a lightweight, durableand powerful air impact wrench. Soft grip handle with downward facing exhaust make this wrenchcomfortable on the hands and ears and limits thecirculation of brake dust on wheel applications. Finger tip control of power and direction via lever on rear of wrench. Suitable for professional garageuse.


G


G

Air Flexi-Head Ratchet Wrench3/8”Sq Drive

Innovative design flexible ratchet head allows 30°angle adjustment in both directions. Ratchet yokedesigned and manufactured to provide additionalstrength, prolonging the working life. Reversible for usein either direction and trigger operated power control.Rear exhaust with baffle reduces noise level and oilspray. Suitable for use in the professional workshop.1/2”Sq drive version available - Model Number SA610.Drive: 3/8”SqMaximum Torque: 50lb.ftAir Consumption: 5cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPTLength: 256mmWeight: 0.9kg

FModel No. New SA609

F Premier

3/8”Drive

Flexi-Head

HfofsbujpoBjsUppmt

TwinHammer

Composite

18V

Section 14 Cordless Screwdriver & Drill/Drivers560

Cordless Screwdriver 4.8Vwith Pouch & Bits

Lightweight cordless power screwdriver with forwardand reverse both developing 2.5Nm of torque. Built-inLED work light to enhance vision in dark areas. Threecolour LEDs to indicate battery life. Supplied with 17bits. Recharges in 3-5 hours.

No Load Speed: 180rpmMaximum Torque: 2.5NmCharging Time: 3-5hrContents: Bits; Slotted - 3, 4, 5, 6, 7 x 24mm,TRX-Star* - T10, T15, T20 x 24mm, Phillips - #1, #2, #4 x 24mm, Slotted - 3, 4, 5, 6 x 50mm, Bit Adaptor, HSS Drill Bit 2mm, Cordless Screwdriver, Pouch

AModel No. CP48S

A

4.8V

Cordless Hammer Drill/Driver 18V1hr Charge

Superbly balanced tool, intended for professional use.Features fifteen position torque control plus hammeraction, electronic variable speed control with reverseand 10mm keyless chuck. Ideal for both screw drivingand drilling. 1hr Charger with BS approved plug.Supplied in carry-case together with accessories.

Variable Speed: 0-650rpmImpact Rate: 0-10400bpmDrilling Capacities:Wood: 16mmMetal: 10mmChuck Size: 10mmReplacement Battery: CB18VBPWeight Including Battery: 1.8kgAccessories: Drills; 1.5, 2.5, 3, 4, 5, 6mm,Screwdriver Bits; Slotted - 5, 6mm, Phillips - #1, #2,Pozi - #1, #2, Magnetic Bit Holder

EModel No. CP1801V

Cordless drills feature keyless chuck.

DRILL BITS

See pages 580 & 581 forour full range of Drill Bits.

Cordless Drill/Driver 18V

Superbly balanced tool, intended for professionaluse. Features fifteen position torque control,electronic variable speed control with reverse and10mm keyless chuck. Ideal for both screw drivingand drilling. Supplied in carry-case together withaccessories.

Variable Speeds: 0-600rpmDrilling Capacities:Wood: 16mmMetal: 10mmChuck Size: 10mmReplacement Battery: CB18VBPWeight Including Battery: 1.8kgAccessories: Drills; 1.5, 2.5, 3, 4, 5, 6mm,Screwdriver Bits; Slotted - 5, 6mm, Phillips - #1, #2,Pozi - #1, #2, Magnetic Bit Holder

DModel No. CP18035V

D

Cordless Drill/Driver 12V

Superbly balanced tool, intended for professional use.Features fifteen position torque control, electronicvariable speed control with reverse and 10mm keylesschuck. Ideal for both screw driving and drilling.Supplied in carry-case together with accessories.

Variable Speeds: 0-600rpmDrilling Capacities:Wood: 16mmMetal: 10mmChuck Size: 10mmReplacement Battery: CB12VBPWeight Including Battery: 1.5kgAccessories: Drills; 1.5, 2.5, 3, 4, 5, 6mm,Screwdriver Bits; Slotted - 5, 6mm, Phillips - #1, #2,Pozi - #1, #2, Magnetic Bit Holder

CModel No. CP12035V

C

12V

18V

Cordless Impact Driver 14.4V1hr Charge 2 Batteries

Powerful, compact, cordless impact driver withelectronic variable speed trigger. Forward, reverse andtrigger lock control integrated into housing for ease ofuse. Superbly balanced tool with vibration reducinggrip. Features replaceable motor brushes and quick-release bit holder. Includes two 14.4Volt Ni-Cd batterypacks and 1 hour mains charger all supplied in a robustcarry-case.

Battery: 14.4VDrive Size: 6mm Hex Quick-ReleaseNo Load Speed: 0-2100rpmImpact Rate: 0-2900bpmMaximum Torque: 135Nm (100lb.ft)Replacement Battery: CP1441BPWeight: 1.74kg

BModel No. New CP1441

B

E

14.4V

1 HourCharge

1 HourCharge

Section 14 Cordless Hammer Drill/Drivers 561

Cordless Hammer Drill/Driver14.4V Super Torque 1hr Charge 2 Batteries

Professional cordless drill featuring an extra powerfulfan-cooled motor developing up to 25Nm torque.Electronic variable speed in forward/reverse and brakegives complete control. Wide range of torque settingsover two mechanical speeds including hammer action.Built-in spirit level allows for accurate drilling. LEDbattery level indicator prompts re-charging or switchingto second battery (included). 13mm Keyless chuck forquick change of drill/bit and auxiliary handle withinternal storage for supplied 9pc bit set. Supplied inrobust carry-case with internal component storagecompartment.

Battery Type: 14.4V - 1.7AhNo Load Speed: 0-360rpm/0-1300rpm (±15%)Impact Rate: 5760bpm/20800bpm (±15%)Drilling Capacities:Wood: 25mmMetal: 10mmConcrete: 6.5mmChuck Size: 13mmMaximum Torque: 25NmReplacement Battery: CP3014VHKBPWeight Including Battery: 2.4kg

A

Model No. New CP3014VHK

2 Batteries 2 Batteries14.4V

Angle Driver

Allows access with a power drill/driver to awkwardlypositioned fixings. Suitable for 6mm hex bits andsocket adaptors. Magnetic bit retention.

EModel No. AK2104

E

Cordless Hammer Drill/Driver24V Super Torque 1hr Charge2 Batteries

Professional cordless drill featuring an extra powerfulfan-cooled motor developing up to 36Nm torque.Electronic variable speed in forward/reverse and brakegives complete control. Wide range of torque settingsover two mechanical speeds including hammer action.Built-in spirit level allows for accurate drilling. 13mmKeyless chuck for quick change of drill/bit and auxiliaryhandle with internal storage for supplied 9pc bit set.Battery incorporates magnetic plate to hold loosefixings prior to use. Supplied in robust carry-case withinternal component storage compartment and a sparebattery.

Battery Type: 24V - 1.7AhNo Load Speed: 0-550/0-1900rpmImpact Rate: 0-8800/0-30400bpmDrilling Capacities:Wood: 25mmMetal: 10mmConcrete: 6.5mmChuck Size: 13mmMaximum Torque: 36NmReplacement Battery: CP3024VHKBPWeight Including Battery: 2.9kg

C


C

2-Speed Control. Side Handle Bit Storage. Built-in Spirit Level. Battery Level LED Indicators.

Cordless Hammer Drill/Driver18V Super Torque 1hr Charge2 Batteries

Professional cordless drill featuring an extra powerfulfan-cooled motor developing up to 30Nm torque.Electronic variable speed in forward/reverse and brakegives complete control. Wide range of torque settingsover two mechanical speeds including hammer action.Built-in spirit level allows for accurate drilling. LEDbattery level indicator prompts re-charging or switchingto second battery (included). 13mm Keyless chuck forquick change of drill/bit and auxiliary handle withinternal storage for supplied 9pc bit set. Supplied inrobust carry-case with internal component storagecompartment.

Battery Type: 18V - 1.7AhNo Load Speed: 0-500rpm/0-1700rpm (±15%)Impact Rate: 8000bpm/27200bpm (±15%)Drilling Capacities:Wood: 25mmMetal: 10mmConcrete: 6.5mmChuck Size: 13mmMaximum Torque: 30NmReplacement Battery: CP3018VHKBPWeight Including Battery: 2.5kg

B


B

1 HourCharge

18V 2 Batteries 24V


Turns an electric or air drill into a versatile nibblersuitable for cutting intricate shapes in mild steel up to1.6mm thick. Fits any 13mm drill chuck.


DModel No. SNA9820

D

A C- A C- A C- A B-

A

1 HourCharge


1 HourCharge

Section 14 Multi-Purpose Rotary Tools & Engravers562

Diamond-Tipped PortableEngraver 4 x AA Cells

Multi-purpose high-speed power tool with on/of fcontrol. Fitted with diamond-tipped ball type rotaryengraving head. Suitable for engraving wood, metal,plastic and glass. Supplied with belt mounted batterypack and powered by four AA cells (not included).Includes 1.9mtr cable. Ideal for security identificationon valuable appliances.

CModel No. E533

C

Diamond-Tipped Engraver2 x AAA Cells

Multi-purpose high-speed power tool with on/of fcontrol. Fitted with diamond-tipped ball type rotaryengraving head. Suitable for engraving wood, metal,ceramic and glass. Contoured grip for added comfort.Ideal for security identification on valuable appliances.Includes two AAA cells and hex key.

Diamond Tip Specification:Diameter: 1.1mmLength: 25.2mm

DModel No. E532

D

MODELLING TOOL KITSSee page 630 for our full range of Modelling Tool Kits.

Air Micro Die GrinderØ3mm Collet

Air motor with quality bearings for smooth andpowerful operation. Shrouded exhaust gives quieteroperation. Suitable for professional users. Suppliedwith wrenches and grinding points, air tool oil, in-lineoiler and quick connector.Contents: Air Micro Grinder, 10 Grinding Points, Air Tool Oil, In-line Oiler, Quick Connector, Chuck WrenchesFree Speed: 58000rpmCollet: Ø3mmOperating Pressure: 90psi

EModel No. SA673

E

4 x AA Cells

2 x AAA Cells

IMPORTANT SAFETY WARNING!!Always wear eye or face protection w henusing these tools! For a full range of goggles, visors, gloves and ear defend ers,plus other safety equipment, see pages707 to 717 of this catalogue.

Multi-Purpose Rotary Tool &Engraver Set 40pc 230V

Multi-purpose high-speed power tool with on/of f andelectronic variable speed controls. Stepless controlbetween 8000 and 30000rpm. Spindle lock for fast toolchanges. Supplied with a full range of tips, wheels,sanding discs/bands, dressing stone and chuckspanner. Suitable for carving, shaping, de-burring,drilling, engraving, cutting and tool sharpening.Supplied in carry-case.

Supply: 230VSpeed Range: 8000-30000rpmCollets: 2.3, 3mmTwist Drills: 2.3, 3mmMounted Points: 10pcDiamond Tipped Engraving Heads: 1.8mm (x2)Sanding Cylinder: 12.7 x 12.7mmAccessories: Sanding Bands (4pc), Sanding Discs(6pc), Cutting Discs (8pc), Polishing Wheels (2pc),Dressing Stone, Wrench

AModel No. E540

A

Multi-Purpose Rotary Tool & Engraver Set 183pc 230V

Multi-purpose high-speed power tool with on/off and electronic variable speed controls. Stepless control between8000 and 30000rpm. Spindle lock for fast tool changes. Supplied with a full range of tips, wheels, brushes,sanding discs/bands, dressing stone and chuck wrench. Suitable for carving, shaping, de-burring, drilling,engraving, cutting and tool sharpening. Supplied in carry-case.

Motor Power - Supply: 130W - 230VSpeed Range: 8000-30000rpm SteplessContents:Collets: 1.6mm, 2.4mm, 3.2mm (x2)HSS Twist Drills: 1.6mm (x2), 2.4mm (x2), 3.2mm (x2)Mounted Points: 14pcDiamond Tipped Engraving Heads: 7pcHSS Cutters: 2pcSanding Cylinders: 6.4 x 12.7mm, 12.7 x 12.7mmSteel Brushes: 5, 12.7, 21mmBrass Brushes: 5, 12.7, 21mmNylon End Brushes: 5, 12.7, 21mmAccessories: Sanding Bands (38pc), Grinding Wheels (12pc), Felt Wheels (5pc), Felt Wheel Pointed, Cut Off Wheels (36pc), Cut Of f Wheel Heavy-Duty (30pc), Spare Mandrels (4pc), Fibreglass Cut Of f Wheels (5pc), Cloth Wheel, Rubber Emery Wheel, Flap Wheel, Dressing Stone, Wrench, Flexible Rotary Shaft, Polishing Compound

BModel No. E5188

B

Supplied with a comprehensive accessory kit.

E

A 800W B 810W 1050W

Variable Speed Hammer Drill800Watt

800Watt hammer drill with variable speed and reversecontrols. Suitable for driving and removing screws.Hammer action allows up to 13mm capacity inmasonry. Features high quality chuck, textured griphandle and is supplied with adjustable side handle and2mtr cable with BS approved plug.

Capacity: 13mmMotor Power: 800WSupply: 230VNo Load Speed: 0-2900rpmHammer Action: 0-27000bpmDrilling Capacities:Wood: 25mmSteel: 13mmMasonry: 13mmWeight: 2.4kg

AStock Code S0686


Professional 810Watt hammer drill with variable speedand reverse controls. Suitable for driving and removingscrews. Hammer action allows up to 13mm capacity inmasonry. Features high quality chuck with soft griphandle and body for added comfort. Supplied withadjustable side handle, depth stop and 3mtr cable withBS approved plug.

Capacity: 13mmMotor Power: 810WSupply: 230V - 2.6ANo Load Speed: 0-3000rpmHammer Action: 0-28000bpmDrilling Capacities:Wood: 25mmSteel: 13mmMasonry: 13mmWeight: 2.4kgKeyless Chuck (Optional): SD1000KC

BModel No. SD800


Professional heavy-duty 1050Watt hammer drill withvariable speed and reverse controls. Suitable for drivingand removing screws. Two speed mechanical gearboxgives added versatility and hammer action allows up to16mm capacity in masonry. Features high quality chuckwith soft grip handle and body. Supplied with adjustableside handle, depth stop and 3mtr cable with BSapproved plug all in a carry-case with accessories.

Capacity: 13mmMotor Power: 1050WSupply: 230V - 3.0ANo Load Speed: 0-1100/0-3000rpmHammer Action: 0-10000/0-27000bpmDrilling Capacities:Wood: 30mmSteel: 13mmMasonry: 16mmWeight: 3.3kgKeyless Chuck (Optional): SD1000KC

CModel No. SD1000

C

F 1400W Ø185mm

1/4” Router Variable Speed1000Watt

Powerful 1000Watt motor delivers a variable speed of10000 to 30000rpm. Supplied with full accessories,including collet, copy follower , parallel guide andvacuum dust tube. Fitted with 3mtr cable and BSapproved plug.

Motor Power: 1000WSupply: 230V - 4.4ANo Load Speed: 10000-30000rpmCollet Size (Metric): 6-8mmCollet Size (Imperial): 1/4”Plunge Depth: 44mmWeight: 3.2kg

EModel No. SR1000

E 1000W

Variable Speed Jigsaw 700Watt

Heavy-duty 700Watt electric motor with variable speedcontrol. Pendulum cutting action with a maximum cutof 85mm in wood. Tilting sole-plate allows cutting of bevels up to 45°. Supplied with width cutting gauge, dust extraction outlet and fitted with 2.7mtr cable andBS approved plug.

Motor Power: 700WSupply: 230V - 3AStroke Length: 19mmStrokes: 500-2800spmCutting Capacities:Wood: 85mmSteel: 6mmWeight: 2.6kg

DModel No. SJS700

700W

Replacement Blades: Model No: Suitability: TPI: Pack Qty:SJS700B06 Wood 6 3SJS700B10 Wood 10 3SJS700B24 Wood/Soft Metal 24 3

185mm Circular Saw 1400Watt

Powerful 1400Watt electric motor with soft start switch.Aluminium guard protects the 185mm TCT cutting bladethat has a capacity of up to 64mm in wood. Suppliedwith blade, width cutting gauge and dust extractionoutlet. Fitted with 2.6mtr cable and BS approved plug.Motor Power: 1400WSupply: 230V - 6ANo Load Speed: 5000rpmBlade Size: 185 x 2.8mmArbor: 20mmCapacity in Wood: 64mmWeight: 5.1kgReplacement Blade: SCS1400.78

FModel No. SCS1400

D

Section 14 Hammer Drills, Saws & Router 563

F

115mm Angle Grinder 860Watt

Angle grinder with alloy drive casing and composite motor housing. Smooth running860Watt motor and bevel gears give low operating noise and vibration. Features anintegral spindle lock for fast loading/unloading of grinding discs. Slider type powercontrol with power lock. Supplied with side handle, guard and wrench. Grinding discnot included, order Model No. PTC/115G.Disc Size: Ø115mmSpindle Size: M14Motor Power: 860WSupply: 230V - 3.8ANo Load Speed: 11000rpmWeight: 2.3kg

BStock Code S0685

B

Ø230mm

2000W


Angle grinder with alloy drive casing and composite motor housing. Smooth running600Watt motor and bevel gears give low operating noise and vibration. Features anintegral spindle lock for fast loading/unloading of grinding discs. Slider type powercontrol with power lock. Supplied with side handle, guard and wrench. Grinding discnot included, order Model No. PTC/115G.Disc Size: Ø115mmSpindle Size: M14Motor Power: 600WSupply: 230V - 2.6ANo Load Speed: 11000rpmWeight: 2.1kg

AStock Code S0530

A

600W

Ø115mm

860W

Ø115mm


Heavy-duty alloy bevel gear head with composite body housing a powerful 2000Wmotor. Fitted with soft start to reduce mains draw when switched on. Spindle lockdevice for fast loading/unloading of discs. Supplied with side handle, guard andwrench. Fitted 3.0mtr power cable with BS approved non rewirable plug. Grindingdisc not included, order Model No. PTC/230G.Disc Size: Ø230mmSpindle Size: M14Motor Power: 2000WSupply: 230V - 3.8ANo Load Speed: 6000rpmWeight: 5.5kg

FModel No. SG2303


Suitable for a variety of trade applications. Features heavy-duty alloy bevel gearhead with composite body casing and spindle lock for fast loading/unloading of discs.900Watt Heavy-duty motor develops powerful 11000rpm (no load speed). Suppliedwith side handle, guard and wrench. Fitted 3.0mtr power cable with BS approvednon rewirable plug. Grinding disc not included, order Model No. PTC/115G.Disc Size: Ø115mmSpindle Size: M14Motor Power: 900WSupply: 230V - 2.2ANo Load Speed: 11000rpmWeight: 2.2kg

DModel No. SG115

D



CModel No. SG101

C



EModel No. New SG125

E

Ø100mm

600W

Ø115mm

900W

Ø125mm

1000W

Section 14 Angle Grinder564

Section 14 Electric Sanders 565

150mm Dual Action RandomOrbital Sander

Alloy bevel gear head with composite motor housingand carbon brush caps for quick brush replacement.Side mounted slider type power control with powerlock. Supplied with Ø150mm pad and side handle.

Pad Size: Ø150mmThread Size: 5/16”UNFMotor Power: 400WSupply: 230V - 1.7ANo Load Speed: 7000rpmOrbit Size: 8mmWeight: 2.2kgReplacement Pad: PTC/150SAOptional Pads: PTC/150A, PTC/150VA

BModel No. DAS150T

Ø150mm

150mm Heavy-Duty RandomOrbital Sander

Vertical type orbital sander for heavy-duty sandingapplications. Tough composite body shell with triggertype operation and power lock control. Supplied withside handle and pad. Dust-free version available, seepage 497 for details, Model No. ER150D/DFS.Pad Size: Ø150mmThread Size: 5/16”UNFMotor Power: 450WSupply: 230V - 1.8ANo Load Speed: 8000rpmOrbit Size: 8mmWeight: 3.5kgReplacement Pad: PTC/150SA

EModel No. ER150D

E

Heavy-Duty Flat Bed OrbitalSander

Vertical type orbital sander with rectangular sandingplate configuration. Accepts standard 115mm papersand is fitted with spring loaded paper retaining clamps.Tough composite body shell with trigger type operationand power lock control. Supplied with side handle.Dust-free version available, see page 497 for details,Model No. EM110/DFS.Pad Size: 210 x 115mmMotor Power: 500WSupply: 230V - 2.2ANo Load Speed: 8000rpmOrbit Size: 5mmWeight: 3.5kg

FModel No. EM110

F

210 x 115mm

Electric Sanders, Polishers & Sander/Polishers

Suitable for the professional tradesman, our range of sanders, polishers and sander/polishers has a proven record of reliability in the body shop and workshop. All are lightand well balanced. All the machines are double insulated for operator safety and comply with current EU regulations. All power tools are backed by a 12 month warrantyand huge stocks of spare parts. All models fitted with BS approved 3 pin safety plug.

150mm Heavy-Duty Dual ActionRandom Orbital Sander

Alloy bevel gear head with composite motor housingand carbon brush caps for quick brush replacement.Top mounted slider type power control with power lock.Supplied with side handle and Ø150mm backing pad.Pad Size: Ø150mmThread Size: 5/16”UNFMotor Power: 360WSupply: 230V - 1.6ANo Load Speed: 7000rpmOrbit Size: 8mmWeight: 2.1kgReplacement Pad: PTC/150AOptional Pads: PTC/150SA, PTC/150VA

DModel No. EDA150

SANDING BELTS - SBS35

Model No: Size: Grade: Model No: Size: Grade:SBS35/B40GN 6 x 456mm 40 Grit SBS35/B80GW 12 x 456mm 80 GritSBS35/B40GW 12 x 456mm 40 Grit SBS35/B100GN 6 x 456mm 100 GritSBS35/B60GN 6 x 456mm 60 Grit SBS35/B100GW 12 x 456mm 100 GritSBS35/B60GW 12 x 456mm 60 Grit SBS35/B120GN 6 x 456mm 120 GritSBS35/B80GN 6 x 456mm 80 Grit SBS35/B120GW 12 x 456mm 120 Grit

6/12mm Variable Speed BeltSander

Ideal for use in body shops sanding otherwiseinaccessible areas, such as around door-shuts.Features three dif ferent sanding arms to suit theworking area. Self-contained dust collection bag to fitexhaust. Variable speed power control. Belt tensionrelease lever for simple removal/replacement.Supplied in storage/carry-case.

Belt Sizes: 6 x 456mm, 12 x 456mmMotor Power: 400WSupply: 230V - 5ANo Load Speed: 900-1400rpmWeight: 1.45kgReplacement Belts: See table right

AModel No. New SBS35

150mm Dust-Free RandomOrbital Sander Variable Speed

Features variable speed control ranging from 4000 to7000rpm. Rotating dust extraction port. Alloy bevel gearhead with composite motor housing. Supplied withØ150mm hook-and-loop backing pad and side handle.

Pad Size: Ø150mmMotor Power: 750WSupply: 230V - 2.8ANo Load Speed: 4000-7000rpmOrbit Size: 3.5mmWeight: 2.9kgReplacement Pad: DAS151.06

See page 570 for full details of replacement backingpads.

CModel No. New DAS151

BA C

Ø150mm

D

Ø150mm

Ø150mm

VARIABLE SPEED

VARIABLE SPEED

230mm Car Polisher 90Watt

Random orbital polisher with Ø230mm 5-ply foam padand two polishing bonnets. Smooth operation provideseven buf fing/polishing with no hot spots. Impactresistant ABS housing with 360° grip. Supplied with4mtr cable and BS approved plug.

Supply: 230V - 0.4AMotor Power: 90WSpeed: 3500rpmPad Size: Ø230mmCable Length: 4mtrReplacement Backing Pad: ER230P.BPReplacement Bonnet Terry Cloth: ER230P.TBReplacement Bonnet Synthetic Wool: ER230P.WB

BModel No. ER230P

B

150mm Car Polisher 60Watt

Random orbital polisher with Ø150mm 3-ply foam padand two polishing bonnets. Smooth operation provideseven buf fing/polishing with no hot spots. Impactresistant ABS housing with twin grips. Supplied with4mtr cable and BS approved plug.

Supply: 230V - 0.3AMotor Power: 60WSpeed: 3800rpmPad Size: Ø150mmCable Length: 4mtrReplacement Backing Pad: ER150P.BPReplacement Bonnet Terry Cloth: ER150P.TBReplacement Bonnet Synthetic Wool: ER150P.WB

AModel No. ER150P

A

230mm Cordless Polisher 18V

Cordless random orbital polisher with Ø230mm 5-plyfoam pad and two polishing bonnets. Smooth operationprovides even buf fing/polishing with no hot spots.Impact resistant ABS housing with twin grips. Suppliedwith 18V Ni-Cd battery pack and battery charger.

Battery: 18VSpeed: 2800rpmPad Size: Ø230mmReplacement Backing Pad: CP2518.SBPReplacement Battery Pack: CP2518BPReplacement Bonnet Terry Cloth: ER230P.TBReplacement Bonnet Synthetic Wool: ER230P.WB

CModel No. CP2518

CØ150mm Ø230mm Ø230mm

150mm Lightweight Polisher Variable Speed

Features variable speed control ranging from 0 to 2800rpm. Two level gear systemreduces output speed, still maintaining a high torque level. Alloy bevel gear headwith composite motor housing. Spindle lock for easy pad removal. Supplied withØ150mm hook-and-loop backing pad, polishing bonnet and side handle. Up to 50%lighter than some polishers.Pad Size: Ø150mmThread Size: M14No Load Speed: 0-2800rpmMotor Power: 800WSupply: 230V - 3.5AWeight: 2.2kg

EModel No. ER1700P

E

Cordless Wet & Dry Rechargeable Vacuum Cleaner14.4V

Ideal for quick clearing up of spillages. Convenient for use in the home, workshop orcar. Supplied with crevice tool. Features removable collection chamber for easydisposal of waste and removable battery with base charger.Voltage: 14.4VCharging Time: 3-5hrWeight: 1.6kgReplacement Battery: CPV144BP2

FModel No. CPV144

F

14.4V

18V

Backing Pads and Hook & Loop Compounding Heads

Backing Pads - Hook-and-loop faced pads suitable for use with hook-and-loopbacked mops and sponges.Model No: Size:PTCBPV3 Ø117mm x M14PTCBPV4 Ø75mm x M14Hook-and-Loop Compounding Heads - Synthetic sponge compounding headscolour coded according to intended use. Made in UK for use with Sealey and otherpopular machines. White Sponge - Dense and firm. Ideal for compounding2-pack paint systems.Model No: Size:PTCCHV150W Ø150mm x 50mmPTCCHV79W Ø79mm x 25mmBlue Sponge - Softer with more open cell. Excellent for cellulose and acrylics.Model No: Size:PTCCHV150B Ø150mm x 50mmPTCCHV79B Ø79mm x 25mmPink Sponge - Ultra soft type. Use with dark colours and special polishes.Model No: Size:PTCCHV150P Ø150mm x 50mmPTCCHV79P Ø79mm x 25mmRed Sponge - Ultra soft sponge for final finish. Ideal for car valeting.Model No: Size:PTCCHV150R Ø150mm x 50mmPTCCHV79R Ø79mm x 25mm


D

Ø150mm

VARIABLE SPEED

Section 14 Electric Polishers566

Wet&Dry

B

170mm Heavy-Duty Sander/Polisher 6-Speed

Features six speed power control producing speeds suitable for sanding andpolishing. Heavy-duty motor produces up to 2200Watts of power under load tests.Alloy bevel gear head with composite motor housing and trigger type operation withpower lock control. Supplied with Ø170mm backing pad and side handle.Pad Size: Ø170mmThread Size: M14No Load Speed: 600-2800rpmMotor Power: 1300WSupply: 230V - 5.7AWeight: 4.4kg

DModel No. MS700PS

D

170mm Sander/Polisher 6-Speed

Features six speed power control producing speeds suitable for sanding andpolishing. Speeds vary from 1400 to 3200rpm. Alloy bevel gear head with compositemotor housing. Supplied with Ø170mm backing pad and side handle.

Pad Size: Ø170mmThread Size: M14No Load Speed: 1400-3200rpmMotor Power: 1300WSupply: 230V - 5.8AWeight: 3.8kg

BModel No. MS900PS

180mm Sander/Polisher Variable Speed

Features variable speed control giving a range suitable for both sanding andpolishing. Speeds from 660 to 3000rpm. Alloy bevel gear head with compositemotor housing. D-handle is reversible for left or right hand use. Spindle lock for easypad removal. Safety button to prevent accidental start-up. Supplied with Ø180mmhook-and-loop backing pad, polishing bonnet, spare brushes and hex key.

Pad Size: Ø180mmThread Size: M14No Load Speed: 660-3000rpmMotor Power: 1200WSupply: 230V - 5.2AWeight: 3.2kg

AStock Code. S0758

A

E

Adjustable Safety Eyeshield

BSEN166/FT - W raparound, clear , anti-scratch,polycarbonate lens. Adjustable length nylon arms fora snug fit. Tested to particle impact at 45m/s.

GModel No. SSP44

G

F

178mm Lambswool Bonnet

Suits all makes of electric and air polishing machines.Uses a synthetic pile mix to obtain a deep polishingeffect. Fabric backing.

FModel No. ER/MS/66

Ø180mm

Compounding Heads

Synthetic foam compounding heads colour codedaccording to intended use. Made in UK for use withSealey and other popular machines. Available withM14 or 5/8”UNC threads (except red foam - M14 only).

Type: Model No:Blue Foam PTC/CH/M14-BSoft with open cell. Excellent for cellulose and acrylics.Pink Foam PTC/CH/M14-PUltra soft type. Use with dark colours and special polishes.Red Foam PTC/CH/M14-RUltra soft sponge for final finish. Ideal for car valeting.White Foam PTC/CH/M14-WDense and firm. Ideal for compounding 2-pack paintsystems.Yellow Foam PTC/CH/M14-YCoarse type with open cell for aggressive jobs. Idealfor new LV paint.


170mm Sander/Polisher Variable Speed

Features variable speed control ranging from 500 to 3200rpm - suitable for sandingand polishing. Alloy bevel gear head with composite motor housing. Carbon brushcaps for simple maintenance. Supplied with Ø170mm backing pad, polishing bonnetand side handle.Pad Size: Ø170mmThread Size: M14No Load Speed: 500-3200rpmMotor Power: 1500WSupply: 230V - 6.6AWeight: 3.6kg

CModel No. New MS850PS

C

Ø170mm

For 5/8”UNC version of Compounding Heads, please see page 570.

VARIABLE SPEED Ø170mmVARIABLE SPEED

VARIABLE SPEED Ø170mmVARIABLE SPEED

Section 14 Electric Sander/Polishers 567

BA

Hot Air Gun Kit

Double insulated hot air gun suitable for paint stripping,soft soldering, removing sticky labels and defrostingpipes. Fitted with two step temperature and air flowcontrol switch. Ball joint cable guide prevents cablewear. Fitted BS approved 3 pin safety plug.

Power Output: 766/1583WSupply: 230V - 4.7/6.7ATemperature Range: 316°C/528°CAir Flow: 220/420ltr/minContents: Hot Air Gun, Fish Tail Nozzle,Window Nozzle

BModel No. HS103K

Hot Air Gun

Two step switch for temperature and air flow control.Gun is designed to stand vertically , allowing use as asafe Bunsen burner alternative. Suitable for paintstripping, soft soldering, removing sticky labels anddefrosting frozen pipes. Fitted BS approved 3 pin safetyplug. Nozzles available separately see below.

Power Output: 1600WSupply: 230V - 6.9ATemperature Range: 375°C/500°CAir Flow: 300/500ltr/min

AModel No. New HS105

Variable Temperature Hot AirGun Kit

Two step air flow control switch, with variabletemperature range on both levels. Gun is designed tostand vertically, allowing use as a safe Bunsen burneralternative. Suitable for paint stripping, soft soldering,removing sticky labels and defrosting frozen pipes.Fitted BS approved 3 pin safety plug. Supplied withfour nozzles and scraper, all in a storage case.

Power Output: 2000WSupply: 230V - 8.6ATemperature Range: 50-450°C/90-600°CAir Flow: 250/500ltr/min

CModel No. New HS107K

C

D

Deluxe Hot Air Gun Kit with LED Display

Fitted with variable electronic temperature control andLED temperature display. Two-speed air-flow control.Nozzle storage slot in grip guard. Suitable for paintstripping, soft soldering, removing sticky labels anddefrosting frozen pipes. Ball joint cable guide reducescable wear . Double insulated and fitted with BSapproved 3 pin safety plug. Supplied with four nozzles,stand, stripper, scraper handle, three scraper blades,all in a storage case.

Power Output: 1000/2000WSupply: 230V - 4.3/8.7ATemperature Range: 50-550°C/50-650°CAir Flow: 265/520ltr/minContents: Hot Air Gun, Four Nozzles, Stand,Stripper, Scraper Handle, Three Scraper Blades

DModel No. HS104K

Hot Air Gun Accessories forHS105 & HS107K

Suitable for use with HS105 & HS107K hot air guns.Model No: Description:

HS107K.26 Fish Tail NozzleHS107K.27 Wide ScraperHS107K.28 DeflectorHS107K.29 Cone NozzleHS107K.30 Scraper

E

E

Model No. SEE BELOW

1

1

2

3

2345

5

4

Section 14 Hot Air Guns568

D

D

C

C

E

Hot Air Gun

Features twin speed air flow control. Composite,double insulated housing. Suitable for paint stripping,soft soldering, removing sticky labels and defrostingfrozen pipes. Nozzles supplied separately. Suppliedwith fitted BS approved 3-pin safety plug.

Power Output: 1600WSupply: 230V - 6.9ATemperature Range: 300°C/500°CAir Flow: 240/450ltr/min

AModel No. HS100CE

A C

Plastic Welding Kit

Hot air gun kit supplied with two plastic welding nozzles,a starter pack of ABS welding rods and a conciseinstruction manual. Hot air gun specification as HS102.Contents: HS102 Hot Air Gun, Plastic Welding Nozzle, Reduction Nozzle, Starter Pack of ABS Rods

CModel No. HS102K

General Purpose Glue Sticks

Hot melt glue sticks suitable for Sealey and otherpopular makes of glue guns. Length 100mm each.Model No: Pack Qty:

AK292/1 6pcAK292/2 25pc


G

D

1

2

3

4

5

6

71

2

Hot Air Gun Accessories

Suitable for HS100CE (not items 5, 6 & 7), HS102 andHS102K hot air guns.Model No: Description:

HS100/1 Fish Tail NozzleHS100/2 Window NozzleHS100/3 Deflector NozzleHS100/4 Reduction NozzleHS102K/1 Plastic Welding RodsHS102K/2 Plastic Welding NozzleHS102K/3 9mm Reduction Nozzle


12

12

34567

Variable Temperature Hot AirGun

Equipped with triple-range variable electronictemperature control. Suitable for paint stripping, softsoldering, removing sticky labels and defrosting frozenpipes. Additionally suitable for plastic welding withoptional plastic welding nozzles. Nozzles suppliedseparately. Gun is designed to stand vertically ,allowing use as a safe Bunsen burner alternative.Fitted BS approved 3 pin safety plug.Power Output: 2000WSupply: 230V - 8.7ATemperature Range: 50°C-600°CAir Flow: 150/300/500ltr/min

BModel No. HS102

B

Premier Premier

Premier

E

Electric Glue Gun

Composite housing with trigger feed. Fitted with 1.5mtrof cable with BS approved 3 pin 230V non-rewirablefused plug. Includes two glue sticks.

EModel No. AK292

B & C B & C

Butane Heating/Soldering TorchKit

Portable and lightweight torch with piezoelectric start.Features adjustable heating control ranging up to450°C (approximately). Removable solder tiptransforms torch into burning flame heat source.Supplied with a variety of nozzles for variousapplications including a flameless heat source adaptor.Safety cap for storage. Sponge cleaning tray and smallroll of solder wire. Suitable for heating, soldering andshrinking. Powered by Butane (lighter fluid).

Contents: Butane Solder Torch, Deflector Nozzle,3 x Solder Tips, Hot Knife Tip, Sponge Stand, Safety Cap, Solder Wire, Wrench

FModel No. AK2946

F

For our full range of Butane Soldering Torches, See Pages 625 to 626.

Section 14 Hot Air Guns & Glue Gun 569

Power Tool Wrenches

Our power tool wrenches fit most other makes of toolsas well. Check the diameter of the pins and thedistance between, then see below.Model No: Size/Type:

PTC/UPW 10-30mm/4mm PinsPTC/PS20-4 20mm/4mm PinsPTC/SS10 10mm Stop

1/4”UNC Hook & Loop Mini Backing Pads

Suitable for air and electric tools with 1/4”UNC thread.

Model No: PTC50VAApplications: SA721, SA722Pad Size: Ø50mmThread: 1/4”UNCSuitability: Hook-and-Loop Papers

Model No: PTC75VAApplications: SA721, SA722Pad Size: Ø75mmThread: 1/4”UNCSuitability: Hook-and-Loop Papers

Compounding Heads

Synthetic foam compounding heads colour coded according to intended use. Madein UK for use with Sealey and other popular machines. Available with M14 or5/8”UNC threads (except red foam - M14 only).

White Sponge - Dense and firm. Ideal for compounding2-pack paint systems.Model No: Thread:PTC/CH/M14-W M14PTC/CH/5/8-W 5/8”UNC

Blue Sponge - Softer with more open cell. Excellent for cellulose and acrylics.Model No: Thread:PTC/CH/M14-B M14PTC/CH/5/8-B 5/8”UNC

Pink Sponge - Ultra soft type. Use with dark colours and special polishes.Model No: Thread:PTC/CH/M14-P M14PTC/CH/5/8-P 5/8”UNC

Yellow Sponge - Coarse type with open cell for aggressive jobs. Ideal for LV paint.Model No: Thread:PTC/CH/M14-Y M14PTC/CH/5/8-Y 5/8”UNC

Red Sponge - Ultra soft sponge for final finish. Ideal for car valeting.Model No: Thread:PTC/CH/M14-R M14

Model No. SEE BELOW

A

Backing Pads and Hook & Loop Compounding Heads

Backing Pads - Hook-and-loop faced pads suitable for use with hook-and-loopbacked mops and sponges.Model No: Size:PTCBPV3 Ø117mm x M14PTCBPV4 Ø75mm x M14

Hook-and-Loop Compounding Heads - Synthetic sponge compounding headscolour coded according to intended use. Made in UK for use with Sealey and otherpopular machines. White Sponge - Dense and firm. Ideal for compounding2-pack paint systems.Model No: Size:PTCCHV150W Ø150mm x 50mmPTCCHV79W Ø79mm x 25mm

Blue Sponge - Softer with more open cell. Excellent for cellulose and acrylics.Model No: Size:PTCCHV150B Ø150mm x 50mmPTCCHV79B Ø79mm x 25mm

Pink Sponge - Ultra soft type. Use with dark colours and special polishes.Model No: Size:PTCCHV150P Ø150mm x 50mmPTCCHV79P Ø79mm x 25mm

Red Sponge - Ultra soft sponge for final finish. Ideal for car valeting.Model No: Size:PTCCHV150R Ø150mm x 50mmPTCCHV79R Ø79mm x 25mm


B

D

Lambswool Bonnet Ø178mm

Suits all makes of electric and air polishing machines.Uses a synthetic pile mix to obtain a deep polishingeffect. Fabric backing.

EModel No. ER/MS/66

E

F


A

Sander Backing Pads

Suitable for air and electric tools fitted with 5/16”UNF orM14 thread.Model No: Diameter-Thread: Suitability:PTC/150A 150mm-5/16”UNF Stick-on Papers

(Firm)PTC/150SA 150mm-5/16”UNF Stick-on Papers

(Soft)PTC/150VA 150mm-5/16”UNF Hook & Loop Papers

(Blue Foam)PTC/150VA/M14 150mm-M14 Hook & Loop Papers

(Black Foam) AK289* 150mm-5/16”UNF Stick-on PapersAK290* 150mm-5/16”UNF Hook & Loop Papers PTC/180VA 180mm-M14 Hook & Loop Papers

(Yellow Foam)*Dust-Free

DModel No. SEE BELOWC

Model No. SEE BELOW

C 1

2

Ø50mm

Ø75mm

1

1

2

2

3

3

1

2

Section 14 Power Tool Accessories570

BA

C

D

Cutting Discs

General purpose flat cutting discs recommended for use with Sealey and otherleading makes of grinding and cutting power tools.Model No: Size:PTC/3C Ø75 x 2 x 10mmPTC/3C5 (Pack of 5) Ø75 x 2 x 10mmPTC/3CT Ø75 x 1.2 x 10mmPTC/100C Ø100 x 3 x 16mmPTC/100CET Ø100 x 1.2 x 16mmPTC/100CT Ø100 x 1.6 x 16mmPTC/115C Ø115 x 3 x 22mmPTC/115CET Ø115 x 1.2 x 22mmPTC/115CT Ø115 x 1.6 x 22mmPTC/125C New Ø125 x 3 x 22mmPTC/125CET New Ø125 x 1.2 x 22mmPTC/125CT New Ø125 x 1.6 x 22mmPTC/180C Ø180 x 3 x 22mmPTC/230C Ø230 x 3 x 22mmPTC/230CT Ø230 x 1.9 x 22mmPTC/300C Ø300 x 2.8 x 25.4mmPTC/355C Ø355 x 2.8 x 25.4mm


Grinding Discs

Aluminium oxide, depressed centre discs for electric and air tools. Suitable for metalgrinding applications.Model No: Size:PTC/50G Ø50 x 4 x 10mmPTC/100G Ø100 x 6 x 16mmPTC/115G Ø115 x 6 x 22mmPTC/125G New Ø125 x 6 x 22mmPTC/180G Ø180 x 6 x 22mmPTC/230G Ø230 x 6 x 22mm


For full range of Electric Angle Grinders see page 564and for Air Angle Grinders see page 528.

Backing Pads & Nuts

Backing pads for sanders and grinders.Model No: Diameter: Thread Size:PTC/BP3 90mm n/aPTC/BP4 100mm n/aPTC/BP7/M14 170mm M14PTC/BP7/5/8 170mm 5/8”UNCLock nuts for backing pads.PTC/BP3/NUT M10 x 1.25PTC/BP4/NUT M14 x 2PTC/LN/M14 M14PTC/LN/5/8 5/8”UNC


Zirconium Flap Discs

Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning andgeneral surface preparation. Lasts many times longer than a normal sanding disc.Abrasive flaps are attached to rigid disc with epoxy adhesive - does not requirebacking pad. Depressed centre disc suitable for electric and air tools.

Model No: Grit: Size:FD10040 40 Ø100 x 16mmFD10060 60 Ø100 x 16mmFD10080 80 Ø100 x 16mmFD11540 40 Ø115 x 22mmFD11560 60 Ø115 x 22mmFD11580 80 Ø115 x 22mmFD12540 New 40 Ø125 x 22mmFD12560 New 60 Ø125 x 22mmFD12580 New 80 Ø125 x 22mm


Section 14 Power Tool Accessories 571


Turns an electric or air drill into a versatile nibblersuitable for cutting intricate shapes in mild steel up to1.6mm thick.


AModel No. SNA9820

A

Drill Powered Pump

Suitable for use with electric drill with output of 350Wattor more. Composite housing supplied with two 1/2”quick release couplings. Delivers up to 1000ltr/hr offluid at 3000rpm. Suitable for water, organic solvents,motor oil, heating oil, insecticides, pesticides, liquidfertilisers and other non-aggressive liquids.

Delivery Pressure: 15psi at 3000rpmSuction Head: 1mtr

BModel No. TP51

B

Wire Cup Brushes

Suitable for use with angle grinders. Crimped steelfilaments with brassed finish for added corrosionresistance.

Model No: Thread: Diameter: Maximum Speed:CBC75 M10 75mm 12500rpmCBC100 M14 100mm 8500rpmCBC125 M14 125mm 6500rpm


I

Wire Cup Brushes

Suitable for use with power drills. Ø6mm Shaft.Crimped steel filaments with brassed finish for addedcorrosion resistance.

Model No: Shaft: Diameter: Maximum Speed:SCB50 Ø6mm 50mm 4500rpmSCB75 Ø6mm 75mm 4500rpm


J

Flat Wire Brushes

Suitable for use with power drills. Ø6mm Shaft. Crimpedsteel filaments add extra rigidity and cleaning power .

Model No: Shaft: Diameter: Maximum Speed:SFB50 Ø6mm 50mm 4500rpmSFB75 Ø6mm 75mm 4500rpmSFB100 Ø6mm 100mm 4500rpm


K

Twist Knot Wire Cup Brushes

Suitable for use with angle grinders. Twisted steelfilaments give more aggressive cleaning action - idealfor heavy rust removal.

Model No: Thread: Diameter: Maximum Speed:TKCB65 M10 65mm 12500rpmTKCB100 M14 100mm 8500rpm

LModel No. SEE BELOW

L

Drill Chucks & Keys

Chucks and keys to fit Sealey cordless power tools, airtools and drill presses.

Model No: Type: Suitability:DC/J-38HC 10mm Chuck Keyless Chuck

for Cordless ToolsDC/J-38 10mm Chuck Small Air ToolsDC/J-38K-T Chuck Key T-ShapeDC/J-38K-L Chuck Key L-Shape

Model No. SEE BELOW

E F

G H

GH

E

F

E H-

Angle Driver

Allows access with a power drill/driver to awkwardlypositioned fixings. Suitable for 6mm hex bits andsocket adaptors. Magnetic bit retention.

CModel No. AK2104

C

Cobalt Drill Bit Set 19pc - Metric

High speed steel with 5% Cobalt makes these ideal fordrilling extra hard materials. Split tip enables bits to biteworkpiece quickly reducing the need for centre mark.Drills can be re-sharpened without af fecting theirperformance. Supplied in metal storage case. Seepages 580 & 581 for our full range of Drill Bit sets.

Contents: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5,7, 7.5, 8, 8.5, 9, 9.5, 10mm

DModel No. AK4701

D

Section 14 Power Tool Accessories572

Section 15Machine Shop574 Bench Pillar Drills576 Floor Pillar Drills577 Variable Speed & Radial Arm Pillar Drills578 Premier Bench Pillar Drills579 Premier Floor Pillar Drills580 Drill Bit Sets582 Drilling/Milling Machines, Shears & Folders584 Lathes, Lathe Tools & Accessories587 Power Bandsaws590 Power Hacksaws & Cut-Off Saws592 Bench Grinders594 Drill Vices & Clamps595 Bench Vices

A

A

Model No: SDM30 GDM50B GDM92BDrilling Capacity (Chuck Size): 13mm 16mm 16mmSpindle Nose Taper: JT2-1/2 MT2 MT2Swing: 256mm 314mm 314mmSpindle Centre to Column: 105mm 127mm 127mmSpindle Travel: 50mm 60mm 60mmNumber of Speeds: 5 5 12Speed Range: 650-2800rpm 460-2890rpm 210-2580rpmMaximum Distance Spindle to Table: 208mm 275mm 370mmMaximum Distance Spindle to Base: 293mm 385mm 480mmWorking Table Surface Size: 162 x 158mm Ø250mm Ø250mmWorking Base Surface Size: 140 x 180mm 155 x 165mm 155 x 165mmOverall Base Size: 198 x 310mm 340 x 210mm 340 x 210mmColumn Diameter: 46mm 60mm 60mmCollar Diameter: 42mm 55mm 60mmOverall Height: 583mm 745mm 840mmMotor Power: 170W - 230V 370W - 230V 370W - 230VInput Power: 330W - 230V 550W - 230V 550W - 230VWeight: 18kg 35kg 37kgOptional Keyless Chuck 16mm: - GDMX/KC GDMX/KC

B C

Keyless Pillar Drill Chuck 16mm

High carbon steel chuck suitable for models GDM50B- GDM200F. Hand tightening of chuck collar grips drillbit securely with three high carbon steel jaws.Chuck Capacity: 16mm

EModel No. GDMX/KC

E

All models of drill are supplied with a safety guard andare fitted with a no-volt release switch to preventaccidental restart after a mains power interruption. Motors are fitted with VDE approvedcable and approved 3-pin safety plug.

B C

D

Safety Guards

Flip-up safety guards are supplied with all Sealey pillardrills. Check the collar size of the drill and orderaccordingly. Also fits other popular drills.

Model No: Collar Size:DPG30 Ø40mmDPG62 Ø62mmDPG95 Ø55mmDPG99 Ø60mmDPG230 Ø75mmDPG240 Ø85mmDPG250 Ø92mm


Bench Mounting Pillar Drills

A comprehensive range of bench pillar drills to suit lightindustrial, agricultural and woodworking applications.All machines meet Safety of Machinery (Safety)Regulations 1992 (and amendments). Safety devicesfitted include a no-volt release switch, allowinginsurance company approval for use in educationalestablishments. Models GDM92B and up have morsetaper spindle housings for taking taper shank drill bits.All models offer multiple speed drives and access todrive belts is denied during operation by mechanicalprotection. All drills are fitted with rack and pinion feedshafts with preset depth control for repetitive work.Mortise attachments are available for all modelsGDM120B - GDM200F inclusive.

A C-Model No. SEE TABLE

DRILL BIT SETSSee pages 580 & 581 for our full range ofDrill Bit Sets.

Section 15 Bench Pillar Drills574

IMPORTANT SAFETY WARNING!Always wear eye or face protection when usingthese tools. For a full range of goggles, visors, glovesand ear defenders, plus other safety equipment, seepages 707 to 717 of this catalogue.

Bench Mounting Pillar Drills

A comprehensive range of bench pillar drills to suit lightindustrial, agricultural and woodworking applications.All machines meet Safety of Machinery (Safety)Regulations 1992 (and amendments). Safety devicesfitted include a no voltage release switch, allowinginsurance company approval for use in educationalestablishments. Models GDM92B and up have Morsetaper spindle housings for taking taper shank drill bits.All models offer multiple speed drives and access todrive belts is denied during operation by mechanicalprotection. All drills are fitted with rack and pinion feedshafts with preset depth control for repetitive work.Mortise attachments are available for all modelsGDM120B - GDM200F inclusive.

Model No. SEE RIGHT

A B C

Model No: GDM120B GDM150B GDM180BDrilling Capacity (Chuck Size): 16mm 16mm 20mmSpindle Nose Taper: MT2 MT2 MT3Swing: 394mm 436mm 520mmSpindle Centre to Column: 162mm 178mm 220mmSpindle Travel: 80mm 80mm 80mmNumber of Speeds: 16 16 16Speed Range: 210-3340rpm 120-3000rpm 120-3000rpmMaximum Distance Spindle to Table: 460mm 480mm 495mmMaximum Distance Spindle to Base: 640mm 670mm 685mmWorking Table Surface Size: Ø310mm Ø310mm Ø355mmWorking Base Surface Size: 200 x 185mm 205 x 205mm 245 x 240mmOverall Base Size: 420 x 250mm 440 x 260mm 520 x 320mmColumn Diameter: 70mm 80mm 80mmCollar Diameter: 60mm 60mm 75mmOverall Height: 1000mm 1070mm 1085mmMotor Power: 370W - 230V 370W - 230V 750W - 230VInput Power: 550W - 230V 550W - 230V 925W - 230VWeight: 55kg 68kg 80kgOptional Keyless Chuck 16mm: GDMX/KC GDMX/KC GDMX/KC

A B CA C-

Drilling Machine Work Clamp

Based on the locking plier principle, this clamp is quickand easy to use, plus it keeps operator’s hands away fromthe drilling area whilst keeping the workpiece firmly held.

Size: 230mm

DModel No. AK214

D

Mortising Attachment forDrilling Machines

Suitable for use with Sealey and other leading makesof drill. Supplied with three chisel bit sets and fourmounting rings.Mortising attachment is not suitable for SDM30,GDM150B, GDM180B, GDM200F , GDM200F/VS,PDM240F, PDM260F.

Collar Diameters: 40, 52, 55, 60mmChisel & Bit Sets: 1/4”, 3/8”, 1/2”

EModel No. MA10

E

Section 15 Bench Pillar Drills 575

Section 15 Floor Pillar Drills576

Floor Standing Pillar Drills

For a small premium over the cost of a bench drill, youcan avoid tying up valuable bench space. These drillshave adjustable tilting tables and rise and fall heightadjustment by rack and pinion. All models are fully CEcertificated and approved for use in educationalestablishments and the industrial workplace.

A C-Model No. SEE RIGHT

A B

CB

C

Model No: GDM140F GDM160F GDM200FDrilling Capacity (Chuck Size): 16mm 16mm 16mmSpindle Nose Taper: MT2 MT2 MT2Swing: 314mm 394mm 436mmSpindle Centre to Column: 127mm 162mm 178mmSpindle Travel: 60mm 80mm 80mmNumber of Speeds: 12 16 16Speed Range: 210-2580rpm 210-3340rpm 120-3000rpmMaximum Distance Spindle to Table: 780mm 790mm 800mmMaximum Distance Spindle to Base: 1150mm 1220mm 1230mmWorking Table Surface Size: Ø250mm Ø310mm Ø310mmWorking Base Surface Size: 195 x 180mm 200 x 185mm 205 x 205mmOverall Base Size: 420 x 250mm 440 x 260mm 460 x 275mmColumn Diameter: 60mm 70mm 80mmCollar Diameter: 60mm 55mm 60mmOverall Height: 1530mm 1580mm 1630mmMotor Power: 370W - 230V 370W - 230V 560W - 230VInput Power: 550W - 230V 550W - 230V 745W - 230VWeight: 53kg 61kg 74kgOptional Keyless Chuck 16mm: GDMX/KC GDMX/KC GDMX/KC

A

SAFETY GUARDS Safety guards are supplied with all pillar drills. Please note that any drill used on premises covered by the

Health & Safety at Work Act MUST be fitted with a safety guard.

TABLE VICESSee page 594 for our full range of V ices suitable for usewith Pillar Drills.

Radial Arm Pillar Drills

Heavy-duty construction meets Safety of Machinery(Safety) Regulations 1992 (and amendments). Safetydevices fitted include a no-volt release switch andpulley cover cut-out microswitch. Radial feature allowsoff-table drilling and angle drilling. Features a maximumthroat depth of 420mm. Radial arm controlled by rackand pinion assembly allowing fine positioning of drill bit.Available as bench mounting or floor type.

B C-

C

Model No. SEE BELOW

B

The heads of both models can be rotated through135° and have a positive lock in the vertical position.Heads can also be swung through 360°.

Radial Arm Radial Arm

Variable Speed Floor StandingPillar Drill

Variable speed model allows stepless control of drillingspeed between minimum and maximum enabling finercontrol of finish and tolerance. The belt transmissionuses two spring tensioned cone pulleys, the diametersof which can be adjusted by moving a centre idle pulley with the speed adjustment control lever. MeetsSafety of Machinery (Safety) Regulations 1992 (andamendments). Safety devices fitted include a no-voltrelease switch, allowing insurance company approvalfor use in educational establishments. Supplied withchuck guard.

Drilling Capacity (Chuck Size): 16mmSpindle Nose Taper: MT2Swing: 436mmSpindle Centre to Column: 178mmSpindle Travel: 80mmNumber of Speeds: VariableSpeed Range: 150-2300rpmMaximum Distance Spindle to Table: 800mmMaximum Distance Spindle to Base: 1230mmWorking Table Surface Size: Ø310mmWorking Base Surface Size: 205 x 205mmOverall Base Size: 460 x 275mmColumn Diameter: 80mmCollar Diameter: 60mmOverall Height: 1630mmMotor Power: 560W - 230VInput Power: 745W - 230VWeight: 81kgOptional Keyless Chuck 16mm: GDMX/KC

AModel No. GDM200F/VS

A VARIABLE SPEED

Section 15 Variable Speed & Radial Arm Pillar Drills 577

BModel No: GDM790BR GDM1630FRDrilling Capacity (Chuck Size): 16mm 16mmSpindle Nose Taper: MT2 MT2Maximum Swing: 940mm 940mmMaximum Distance Spindle Centre to Column: 440mm 425mmRadial Arm Travel: 320mm 315mmSpindle Travel: 80mm 80mmNumber of Speeds: 5 5Speed Range: 460-2890rpm 460-2890rpmWorking Table Surface Size: Ø310 Ø310mmWorking Base Surface Size: 155 x 165mm 195 x 180mmOverall Base Size: 340 x 210mm 420 x 250mmColumn Diameter: 60mm 71mmCollar Diameter: 60mm 60mmOverall Height: 790mm 1630mmMotor Power: 370W - 230V 370W - 230VInput Power: 550W - 230V 550W - 230VWeight: 47kg 65kgOptional Keyless Chuck 16mm: GDMX/KC GDMX/KC

C

Section 15 Premier Bench Pillar Drills578

Bench Mounting PremierPillar Drills

A comprehensive range of bench pillar drills for theprofessional workshop. Meets Safety of Machinery(Safety) Regulations 1992 (and amendments). Modelsfeature heavy-duty aluminium-bodied motors for longand reliable performance. Electrical circuitry protectedwith no-volt release switch to prevent inadvertent startup and pulley cover protected by microswitch toprevent drill operating when cover is open. PDM155Bis fitted with an integral work light which illuminates thedrilling table giving operator a clear view of the drillingprocess. Both models supplied with flip-up chuckguard. Large sized square tables fitted with precisionrack and pinion height adjustment.

A B-Model No. SEE RIGHT

A

A B

Model No: PDM125B PDM155BDrilling Capacity (Chuck Size): 16mm 16mmSpindle Nose Taper: MT2 MT2Swing: 403mm 460mmSpindle Centre to Column: 165mm 190mmSpindle Travel: 80mm 80mmNumber of Speeds: 16 16Speed Range: 190-3000rpm 190-3000rpmMaximum Distance Spindle to Table: 485mm 475mmMaximum Distance Spindle to Base: 700mm 660mmWorking Table Surface Size: 254 x 254mm 290 x 290mmWorking Base Surface Size: 205 x 200mm 205 x 200mmOverall Base Size: 450 x 270mm 495 x 290mmColumn Diameter: 73mm 80mmCollar Diameter: 55mm 60mmOverall Height: 1050mm 1050mmMotor Power: 370W - 230V 370W - 230VInput Power: 550W - 230V 550W - 230VWeight: 52kg 62kgOptional Keyless Chuck 16mm: PDM/KC PDM/KCIntegral Work Light:

D

Cooling System Attachment

Suitable for selected PDM Series drills. Reservoir withgravity feed nozzle directs coolant over workpiece.Spent coolant collected in table reservoir.Applications: PDM155B, PDM210F , PDM240F , PDM260F

CModel No. PDM/CS

C

Safety Switch. Microswitch on pulleycover.

Keyless Pillar Drill Chuck 16mm

Suitable for PDM Series drilling machines.

DModel No. PDM/KC

B

WorkLight

Compound Cross Vices

Cast construction with precision machined compoundslides. Fitted with replaceable steel jaws, locking slidesand Metric calibrated lead-screws. Suitable for drillingand machining operations.


Model No: CV4Jaw Width: 100mmJaw Depth: 35mmJaw Opening: 100mmOverall Height: 165mmTravel: 100 x 100mm



E


SAFETY GUARDS Safety guards are supplied with all pillar drills. Pleasenote that any drill used on premises covered by theHealth & Safety at W ork Act must be fitted with asafety guard.

Section 15 Premier Floor Pillar Drills 579

Floor Standing PremierPillar Drills

A comprehensive range of floor pillar drills for theprofessional workshop. Meets Safety of Machinery(Safety) Regulations 1992 (and amendments). Modelsfeature heavy-duty aluminium-bodied motors for longand reliable performance. Electrical circuitry protectedwith no-volt release switch to prevent inadvertent startup and pulley cover protected by microswitch toprevent drill operating when cover is open. Selectedmodels are fitted with an integral work light whichilluminates the drilling table giving operator a clear viewof the drilling process. All models supplied with flip-upchuck guard. Large sized square tables fitted withprecision rack and pinion height adjustment.

A D-

A

Model No: PDM170F PDM210F PDM240F PDM260FDrilling Capacity (Chuck Size): 16mm 16mm 20mm 20mmSpindle Nose Taper: MT2 MT2 MT3 MT4Swing: 413mm 460mm 512mm 612mmSpindle Centre to Column: 170mm 190mm 216mm 260mmSpindle Travel: 80mm 80mm 80mm 120mmNumber of Speeds: 16 16 16 12Speed Range: 190-3000rpm 190-3000rpm 160-3000rpm 120-3480rpmMaximum Distance Spindle to Table: 770mm 725mm 720mm 680mmMaximum Distance Spindle to Base: 1255mm 1225mm 1230mm 1160mmWorking Table Surface Size: 254 x 254mm 290 x 290mm 356 x 356mm 425 x 475mmWorking Base Surface Size: 205 x 200mm 205 x 200mm 205 x 200mm 410 x 330mmOverall Base Size: 450 x 270mm 495 x 290mm 495 x 290mm 575 x 455mmColumn Diameter: 73mm 80mm 80mm 92mmCollar Diameter: 55mm 60mm 75mm 85mmOverall Height: 1610mm 1610mm 1635mm 1710mmMotor Power: 370W - 230V 370W - 230V 750W - 230V 750W - 230VInput Power: 550W - 230V 550W - 230V 925W - 230V 925W - 230VWeight: 58kg 68kg 86kg 125kgOptional Keyless Chuck 16mm: PDM/KC PDM/KC PDM/KC PDM/KCIntegral Work Light:

Model No. SEE TABLE

B

DCBA

C D

Titanium Coated Drill Bit Sets

High quality Titanium coated HSS drill bits designed toreduce friction and heat. Quicker swarf clearance fromthe drill’s cutting edge produces a superior quality offinish compared to normal HSS drills. Ideal for use onstainless steel, copper and high carbon steels.Supplied in display case. See page 581 for full details.

E

INTEGRAL WORK LIGHTModels PDM155B and PDM210Fup are fitted with integral work light providing even illumination over thework table. Bulb: 230V - 60W ES.

WorkLight

MMMM

WorkLight

WorkLight

WorkLight

E


Section 15 Drill Bit Sets580

Solid Cobalt Spot Weld Drill8mm

Suitable for drilling out spot welds on most commonvehicle panels including galvanized, boron and highstress steels. Solid cobalt stock allows re-sharpening,extending product life.

Size: Ø8mmLength: 80mm


High Speed Steel Drill Bit Set25pc

HSS Drill bit set in flip-up metal case. Suitable for generalworkshop use in both hand and pillar drill applications.

Contents: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7,7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13mm

DModel No. TDS/25M

D

MMMM

Tap & Die Set Split Dies 33pcMetric/UNF/BSP

High quality steel taps and dies. Split dies withmachined lead-ins for ease of use. Die holder featuresself-centring mechanism for straight and accuratethread cutting. Set includes T-handled tap wrench,metric screw pitch gauge and slotted 5mm screwdriver.Contents: Taper Taps and Dies; M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5, M12 x 1.75,UNF 1/4”-28, 5/16”-24, 3/8”-24, 7/16”-20, 1/2”-20, BSP1/8”-28, 1/4”-19, Tap Wrench, T-bar Tap Wrench,Die Holder, Thread Gauge, Screwdriver

H I

Automatic Centre Punch

Chromed brass barrel with spring loaded tip and depthadjustment on driver ball.Length: 135mm

HModel No. AK9119


Knurled brass barrel with spring loaded alloy steel point.Length: 125mm

IModel No. AK9121

E

E

SplitDies

33pc

A

SDS Plus Drill Bit Set 6pc

SDS Plus drill bit set suitable for a wide range ofmasonry/concrete hammer drilling operations. Set coversØ5-10mm. Sand blast finish. Supplied in storage case.

Contents:Drill Bit Ø: Length:5mm 1 10mm5.5mm 110mm6mm 1 10mm7mm 160mm8mm 160mm10mm 160mm

AModel No. SDS06

MMMM

SDS Plus Drill & Chisel Bit Set12pc

SDS Plus drill bit and chisel set suitable for a widerange of masonry/concrete hammer drilling/chisellingoperations. Drills cover Ø5.5-20mm, chisels are point,flat and groove. Sand blast finish. Supplied in storagecase.

Contents:Drill Bit Ø: Length:5.5mm 110mm6mm 110mm7mm 160mm10mm 160mm12mm 160mm14mm 210mm16mm 210mm18mm 300mm20mm 450mmChisels: Point, 20mm Flat, 20mm Groove

BModel No. SDS12

B CMMMM MMMM

TAP & DIE SETSSee pages 604 & 605 for our fullrange of Professional Taps & Dies.

Model No. AK3033

SDS Plus Drill Bit Set 11pc

SDS Plus drill bit set suitable for a wide range ofmasonry/concrete hammer drilling operations. Setcovers Ø5.5-20mm. Sand blast finish. Supplied instorage case.

CModel No. SDS11

Contents:Drill Bit Ø: Length:5.5mm 110mm6mm 110mm6mm 160mm7mm 160mm10mm 160mm10mm 210mm10mm 450mm12mm 210mm12mm 450mm16mm 450mm20mm 450mm

G

See pages 453 to 456 for our full range ofProfessional Welding Accessories.

IMPORTANT SAFETY WARNING!Always wear eye or face protection whenusing these tools! For a full range ofgoggles, visors, gloves and ear defenders,plus other safety equipment, see pages707 to 717 of this catalogue.

100% COBALT

Adjustable Safety Eyeshield

BSEN166/FT - W raparound, clear , anti-scratch,polycarbonate lens. Adjustable length nylon arms fora snug fit. Tested to particle impact at 45m/s.

FModel No. SSP44

F

Section 15 Drill Bit Sets 581

A BMMMM MMMM C

D E

Titanium Coated Drill Bit Set19pc

High quality Titanium coated HSS drill bits designed toreduce friction and heat. Quicker swarf clearance fromthe cutting edge produces a superior quality of finishcompared to normal HSS drills. Ideal for use onstainless steel, copper and high carbon steels. Supplied indisplay case.Contents:1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm

AModel No. AK4719


High quality Titanium coated HSS drill bits designed toreduce friction and heat. Quicker swarf clearance fromthe cutting edge produces a superior quality of finishcompared to normal HSS drills. Ideal for use onstainless steel, copper and high carbon steels. Supplied indisplay case.Contents: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5,7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13mm

BModel No. AK4725

G


High quality Titanium coated HSS drill bits designed toreduce friction and heat. Quicker swarf clearance fromthe cutting edge produces a superior quality of finishcompared to normal HSS drills. Ideal for use onstainless steel, copper and high carbon steels.Supplied in a storage case.Contents: 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.2, 4.5, 5, 5.2,5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm

CModel No. AK473M

Cobalt Drill Bit Set 19pc

High speed steel with 5% Cobalt makes these ideal fordrilling extra hard materials. Split tip enables bits to biteworkpiece quickly reducing the need for centre mark.Drills can be re-sharpened without af fecting theirperformance. Supplied in metal storage case.

Contents: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7,7.5, 8, 8.5, 9, 9.5, 10mm

DModel No. AK4701

Step Drills

High speed steel double flute step drills. Allows clog-free, precision drilling of up to fourteen dif ferentsize holes with just one bit.

Model No. AK4712Size Coverage: 4, 5, 6, 7, 8, 9, 10, 11, 12mm

Model No. AK4722Size Coverage: 4, 6, 8, 10, 12, 14, 16, 18,20, 22mm

Model No. AK4732Size Coverage: 4, 6, 8, 10, 12, 14, 16, 18,20, 22, 24, 26, 28, 30mm


Step Drill Set 3pc

Three high speed steel double flute step drills. Allowsclog-free, precision drilling of eighteen dif ferent sizeholes with just three bits. Supplied in flip-up metal case.Size 1: 4, 5, 6, 7, 8, 9, 10, 11, 12mmSize 2: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22mmSize 3: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30mm

HModel No. AK4733

H

MMMM

MMMM MMMM

MMMM

MMMM

HAND PROTECTION

For our full range of Gloves see pages710 to 712.

Ti COATED Ti COATED

Ti COATED

COBALT COBALT

Cobalt Drill Bit Set 25pc

High speed steel with 5% Cobalt makes these ideal fordrilling extra hard materials. Split tip enables bits to biteworkpiece quickly reducing the need for centre mark.Drills can be re-sharpened without af fecting theirperformance. Supplied in metal storage case.

Contents: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7,7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13mm

EModel No. AK4702

1

3

2

1

3

2

Tungsten Carbide TippedMasonry Drill Bit Set 8pc

Tungsten carbide tipped for prolonged life and heavy-duty use. Shank features a special flute design for fastand effective waste removal. Set covers sizes from3mm to 10mm. Supplied in storage case.Contents: 3, 4, 5, 6, 7, 8, 9, 10mm


F

ELECTRIC & CORDLESS HAND DRILLS

See pages 560, 561 & 563 forour full range of Electric & CordlessHand Drills. Suitable for drillingwood, masonry and metal.

Section 15 Drilling/Milling Machine582

Accessories for SM2502

A comprehensive range of high quality accessories forSM2502 mini drilling/milling machine.Model No: Description:

SM2502C04 Collet MT3-M12 4mmSM2502C06 Collet MT3-M12 6mmSM2502C08 Collet MT3-M12 8mmSM2502C10 Collet MT3-M12 10mmSM2502C12 Collet MT3-M12 12mmSM2502C14 Collet MT3-M12 14mmSM2502C16 Collet MT3-M12 16mmSM2502CSET Collet Set MT3-M12 4-16mmSM2502EM04 2 Flute HSS End Mill 4mmSM2502EM06 2 Flute HSS End Mill 6mmSM2502EM08 2 Flute HSS End Mill 8mmSM2502EM10 2 Flute HSS End Mill 10mmSM2502EM12 2 Flute HSS End Mill 12mmSM2502EM14 2 Flute HSS End Mill 14mmSM2502EM16 2 Flute HSS End Mill 16mmSM2502EMSET 2 Flute HSS End Mill Set 4-16mmSM2502MCS Mill Chuck Set MT3-M12 4-16mmSM2502QV Quick Vice 50mmSM2502ICEM Indexable Carbide End Mill 30mmSM3002ST Stand - SM2502, SM2503, SM3002

Mini Drilling/Milling Machine

Bench mounting mini drilling/milling machine with theflexibility to handle most materials. Features include a350Watt motor, variable speed drive, working tablewith T-slots to enable clamping of workpieces andmetric graduated compound scales. The machine also incorporates a tilting column which allowsdrilling/milling of workpiece at ±45° from vertical.Supplied with 13mm chuck accessory kit for adjustingand setting. Complies with Safety of Machinery(Safety) Regulations 1992 (and amendments) and isfully CE approved. An optional stand is available,Model No. SM3002ST. See below for acomprehensive range of accessories.Drilling Capacity: 13mmFace Mill Capacity: 30mmEnd Mill Capacity: 16mmHeadstock Travel: 180mmCross Axis: 100mmLongitudinal Axis: 220mmSpindle Tilt Angle: ±45°Spindle Taper: MT3Spindle Speed - Low Range: 0-1100rpmSpindle Speed - High Range: 0-2500rpmT-Slot: 12mmMotor Power: 350W - 230VWeight: 68kg

AModel No. SM2502

A

Clamping Kit 42pc for SM2502

Comprehensive range of T-nuts, screws and clampsfor attachment to slots in milling table. Also suitable forother popular makes of drilling/milling machines.

BModel No. SM2502CK

B


1

1

1 2

3

5

4

6

1

111

1

2

1

2

22

2

22

234

65

IMPORTANT SAFETY WARNING!Always wear eye or face protectionwhen using these tools! For a full rangeof goggles, visors, gloves and ear defenders, plus other safety equipment,see pages 707 to 717 of this catalogue.

SM25 supplied with facemill attachment.

Vice Mounting Metal Folder600mm

Suitable for mounting in a sturdy bench mounted viceand capable of bending up to 22 gauge steel sheet.Suitable for small garage or restoration operation.

Capacity: 600mm x 22 Gauge Sheet, Ø2mm Rod

Drilling/Milling Machine

Bench mounting drill/mill with twelve speed reversibledrive gives flexibility to handle most materials. Largesurface area table with inverted T-slots to facilitatesecuring of the largest and most awkward shapes.Metric graduated compound scales. Complies withSafety of Machinery (Safety) Regulations 1992 (andamendments) and is fully CE approved. Supplied with63mm face cutter, 90mm angle vice, 16mm drill chuckand safety guard.Compound Scales: MetricDrilling Capacity: 25mmSwing: 496mmFace Mill Capacity: 63mmEnd Mill Capacity: 13mmDiameter of Spindle Sleeve: 85mmHead Swivel: 360°Forward/Backward Table Travel: 145mmRight/Left Table Travel: 370mmTable Working Area: 585 x 190mmSpindle Nose Taper: MT3Spindle Travel: 92mmNumber of Speeds: 12Speed Range: 100-2150rpmMaximum Distance Spindle to Table: 380mmMaximum Distance Spindle to Base: 480mmColumn Diameter: 92mmMotor Power: 750W - 230VOverall Height: 930mmWeight: 167kgDrill Press Guard (Optional): DPG240Floor Stand (Optional): SM25/STAND

AModel No. SM25

A B

CModel No. DF600

C

G

Clamping Kit 52pc

Ensures the firm clamping of most sizes of workpiecewhilst drilling and milling. T-Nuts and screws includedsuitable for attachment to slots in drilling/milling table.Fits Sealey and other popular makes of drilling/millingmachines.

BModel No. SM25/52T

Metal Cutting Shears

Manufactured from steel-plate and fitted with hardenedsteel shear blades for accurate cutting and long life.Designed to be bolted to the bench and supplied withlong pattern handle for maximum leverage. Suitablefor cropping steel sheet and bar.

Model No: Sheet: Round Bar: Max.Cut Length:3S/4R 4mm* Ø10mm 120mm3S/5R 5mm* Ø11mm 140mm3S/6R 6mm* Ø13mm 180mm*Capacity in Steel


D

Sheet Metal Disc Cutter

Bench mounting, 8mm plate-steel disc cutter suitablefor cutting up to 16 gauge steel sheet. Deep throat andsmall cutting disc allows tighter curves to be cut thantraditional straight blade cutters. Ratchet action cutterblade. Especially suitable for car restoration work aswell as general workshop use.

FModel No. DC16

F

Floor Standing Metal Folder910mm

Floor standing metal folder with 910mm capacity .Manually operated and suitable for folding up to 22gauge sheet.


GModel No. DF910

Bench Mounting Sheet MetalFolder 760mm

Bench mounting sheet metal folder, fitted with mountingplates. Capable of bending up to 17 gauge steel sheet.Ideal for the small garage or restoration operation.


EModel No. DF760

E

SM25 supplied with 13mmcapacity drill chuck.

3 Sizes

(SM25 Illustrated with optional standModel No SM25/STAND)

Section 15 Drilling/Milling Machine, Shears & Folders 583

Lathe Tools Sets

HSS Lathe tools suitable for machining mild steel,brass, copper and plastics. 8x8mm Section fits Sealeyand other popular makes. Manufactured to standardDIN profiles.

A C-Model No. SEE RIGHT

Lathe Tools & Accessories

A comprehensive range of tools and accessories forour SM2503 and SM3002 lathe/mill/drill and lathe.

Model No. SEE BELOW

A B C

1 2 3 4 5

6 7 8 9 10

11 12 13 14 15

16 17 18 22

19 20 21

SM3002CS11 - Cutter Set 8x8mm 11pc SM3002CS6 - Cutter Set 8x8mm 6pc

SM3002CS5 - Cutter Set8x8mm 5pc

SM2503CSET - Collet Set MT2-M10Ø3-10mm

SM2503EMSET - HSS End Mill SetØ3-10mm

SM2503MCSET - Mill Chuck SetMT2-M10 Ø3-10mm

SM2503ICEM - Indexable CarbideEnd Mill MT2-M10 Ø16mm

SM2503QV - Quick Vice 50mm

SM3002CS2 - Cutter Set 2pc SM30024JC - 4-Jaw IndependentChuck

SM2503FP - Face Plate Ø112mmSM3002FP - Face Plate Ø160mm

SM2503FR - Follow Rest SM3002FR - Follow Rest

SM3002KTH - Knurling Tool SM3002LD - Lathe Dog

SM3002MA - Mill Attachment SM3002QCCR - Quick Change Post SM3002DFD - Digital Feed Display SM3002ST - Floor Stand

SM2503SR - Steady RestSM3002SR - Steady Rest

SM2503TCK - Metric ThreadCutting Gear Kit

SM2503RC - Revolving Dead Centre MT1SM3002RC - Revolving Dead Centre MT2

SM2503HC - Live Centre MT2SM3002SC - Live Centre MT3

SM2503TC - Tail Stock Chuck MT1-10mmSM3002TC - Tail Stock Chuck MT2-13mm

SM2503THSET - Tool Holder (Parting & Bore) Set 2pc

SM2503COBT - Parting Tool &Bore Cutter

1 22-

Section 15 Lathe Tools & Accessories584

Lathe & Mill/Drill Tools & Accessories

Description: Lathe/Mill/Drill Lathe Model No:SM2503 SM3002

Cutter Set 8x8mm 11pc SM3002CS11Cutter Set 8x8mm 6pc SM3002CS6Cutter Set 8x8mm 5pc SM3002CS5Collet Set MT2-M10 Ø3-10mm - SM2503CSETHSS End Mill Set Ø3-10mm - SM2503EMSETMill Chuck Set MT2-M10 Ø3-10mm - SM2503MCSETIndexable Carbide End Mill MT2-M10 Ø16mm - SM2503ICEMQuick Vice 50mm - SM2503QVRevolving Dead Centre MT1 - SM2503RCRevolving Dead Centre MT2 - SM3002RCLive Centre MT2 - SM2503HCLive Centre MT3 - SM3002SCTail Stock Chuck MT1 - SM2503TCTail Stock Chuck MT2 - SM3002TCTool Holder (Parting & Bore) Set 2pc SM2503THSETParting Tool & Bore Cutter - SM2503COBTCutter Set 2pc - SM3002CS24-Jaw Independent Chuck SM30024JCFace Plate Ø112mm - SM2503FPFace Plate Ø160mm - SM3002FPSteady Rest - SM2503SRSteady Rest - SM3002SRMetric Thread Cutting Gear Kit - SM2503TCKFollow Rest - SM2503FRFollow Rest - SM3002FRKnurling Tool - SM3002KTHLathe Dog - SM3002LDMill Attachment - SM3002MAQuick Change Post - SM3002QCCRDigital Feed Display - SM3002DFDFloor Stand SM3002ST

Mini Lathe/Drilling Machine

Bench mounting, multifunction mini drill, mill and lathewith variable speed giving the flexibility to handle mostmaterials. Features two 150W att motors, one tooperate the drill/mill and the other to power the lathe.The lathe cutting feed can be power driven oradvanced manually . Thread cutting may also beundertaken with the optional thread cutting kit.Supplied with metric graduated scales and allnecessary tools required for setting and adjusting.Complies with Safety of Machinery (Safety) Regulations1992 (and amendments) and is fully CE approved. Anoptional stand is available, Model No. SM3002ST.

Specification - Cutting:Swing Over Bed: 140mmDistance Between Centres: 250mmSpindle Hole Taper: MT2Cross Slide Travel: 61mmTailstock Taper: MT1Spindle Speed (Variable): 100-2000rpmRange of Metric Threads: 5 Pitches (0.5-1.25mm)Specification - Drilling:Maximum Drilling/Milling Capacity: 10mmDrilling/Milling Spindle Travel: 30mmDrilling/Milling Spindle Speed: 100-1300rpmT-Slot: 8mmDistance from Spindle to Table: 180mmDistance from Spindle Centre to Column: 100mmMotor Power: 2 x 150W - 230VWeight: 50kg

DModel No. SM2503

D

Metal Working Lathe 300mm

Precision built metal working lathe, ideal for the smallworkshop, professional or home engineer and modelmaker. Powered by a 300Watt motor this compact unitfeatures variable speed reversible drive and poweredcutting facility for right and left hand threads. Suppliedwith self centring three jaw chuck, four-way tool post,swarf tray and rear splash guard. Complies with Safety of Machinery (Safety) Regulations 1992 (andamendments), is fully CE approved and supplied withemergency stop button and chuck guard. An optionalstand is available, Model No. SM3002ST.

Spindle Speed Range: 100-2500rpmDistance Between Centres: 300mmCentre Height: 90mmMaximum Workpiece Diameter: 180mmSpindle Bore: 20mmSpindle Taper: MT3Tailstock Taper: MT2Leadscrew: MetricDimensions: 300 x 300 x 830mmMotor Power: 300W - 230VWeight: 40kg

EModel No. SM3002

E

2122

20191817161615141413131211

CBA

10988776654321

Model No. SEE BELOW

See opposite page for illustrations.

14

19

Section 15 Lathes 585

Accessories for SM27

Model No: Description: Model No: Description:SM27FS Fixed Steady SM27TSC Tail Stock Chuck 13mmSM27MS Moving Steady SM27RDC Revolving Dead CentreAK1122 Turning Tool Set 10 x 10mm 6pc SM27TNS T-Nut Set 12pcSM27FP Face Plate Ø160mm SM27FJC 4-Jaw Chuck

A

B

Floor Stand for SM27

Suitable for Sealey SM27 metal turning lathe and othersimilar lathes. Includes suds tray with drain.

Height: 690mmWidth: 1000mmDepth: 440mm

BModel No. SM27ST

Metal Turning Lathe

Quality workshop lathe suitable for a wide range ofturning and drilling applications. Features power feedfor even surface finish and thread cutting. Four-way toolpost mounted on compound slide mechanism enablesfast interchange of cutting tools with accurate feed.Powered by 550Watt motor through six-speed gearbox.Incorporates quiet running PTO gearbox with oil bathlubrication for power feed. Supplied with three-jawchuck, and dead centre. Fitted with no-load voltagerelease switch. Meets Supply of Machinery (Safety)Regulations 1992 (and amendments). Workshop standavailable as an optional extra - Model No. SM27ST.

Centre Height Over Bed: 150mmCentre Height Over Saddle: 80mmDistance Between Centres: 500mmSpindle Bore: Ø26mmSpeed Range: 160-1600rpmHead Stock Taper: MT4Tail Stock Taper: MT3Tail Stock Travel: 40mmScrew Cutting:Metric Pitches: 14Metric Pitch Range: 0.5-3mmInch Pitches: 20Inch Pitch Range: 11-40tpiMotor Power: 550WSupply: 230V - 1ph

AModel No. SM27

Model No. SEE BELOW

1

5 6 7 8

2

1234

5678

3 4

Section 15 Metal Turning Lathe586

A

Power Bandsaw 150mmHorizontal/Vertical

Heavy-duty cast base and horizontal/vertical cuttingarm. Saw base features integral mitring vice with scaleof 90° to 45° for angle cutting and fully adjustableprecision blade guides for accurate cutting and longerblade life. Stand is fitted with two transport wheels foradded workshop mobility.

BModel No. SM5

B

Power Bandsaw 150mm with Swivel Arm & Stand

Features swivel arm facility to aid angle cutting of longpieces of stock in confined workshop. Supplied withquick action vice - push the jaw up to the workpieceand then pull the cam action lever to lock. Fullyadjustable precision blade guides for accurate cuttingand longer blade life. Supplied with anti-vibration feetand workshop stand.

Capacity 90º - Round: Ø105mmCapacity 90º - Sq/Rect (H x W): 105 x 150mmCapacity 45º - Round: Ø100mmCapacity 45º - Sq/Rect (H x W): 85 x 65mmBlade Size: 12.7 x 0.7 x 1638mmBlade Speeds: 0.3, 0.5, 0.8mtr/secMotor Power: 375WSupply: 230V - 1phWeight: 75kg

CModel No. SM65

C

Power Bandsaw 200mm with Swivel/Hydraulic Arm

Features hydraulic arm to enable smooth and cleancutting of thin-walled pipe and box section. Swivel armfacility aids angle cutting of long pieces of stock inconfined workshop. Includes integral quick action vice.Supplied with anti-vibration feet for bench mounting.

Capacity 90° - Round: Ø125mmCapacity 90° - Sq/Rect (H x W): 125 x 200mmCapacity 45° - Round: Ø125mmCapacity 45° - Sq/Rect (H x W): 125 x 76mmBlade Size: 12.7 x 0.64 x 1728mmBlade Speeds: 0.3, 0.5, 0.8mtr/secMotor Power: 375WSupply: 230V - 1phWeight: 75kg*Floor Stand Optional : SM658/ST

* Without optional floor stand

DModel No. SM6582

D

Swivel arm mechanism on SM4, SM65, SM6582.

Hydraulic fall control on SM6582.

See page 589 for blade details.

Illustrated withoptional floorstand.

Bandsaw Blade Guards

All Sealey bandsaws are fitted with HSE approvedguards. Guards are available for retro fitting to oldermodels and the kit model numbers are listed below .Model No: Application:SM5/CE/G SM5, SM65SM35/CE/G SM35CE

Model No. SEE BELOW

BLADES & BLADE SELECTIONSee page 589 for details of blades and blade selection.

Capacity 90º - Round: Ø115mmCapacity 90º - Sq/Rect (H x W): 100 x 150mmCapacity 45º - Round: Ø60mmCapacity 45º - Sq/Rect (H x W): 100 x 60mmBlade Size: 12.7 x 0.7 x 1638mmBlade Speeds: 0.3, 0.5, 0.8mtr/secMotor Power: 375WSupply: 230V - 1phWeight: 60kg

B

B

D

Metal Cutting Bandsaw 115mmwith Stand

Compact size and powerful motor make this unitsuitable for the mobile workshop. Features swivel armfacility for added versatility. Supplied with anti-vibrationfeet and workshop stand.Capacity 90° - Round: Ø90mmCapacity 90° - Sq/Rect (H x W): 90 x 115mmCapacity 45° - Round: Ø50mmCapacity 45° - Sq/Rect (H x W): 90 x 50mmBlade Size: 12.5 x 0.64 x 1300mmBlade Speeds: 0.3, 0.5, 0.8mtr/secMotor Power: 375WSupply: 230V - 1phWeight: 31kg

AModel No. SM4

Section 15 Power Bandsaws 587

Model No: SM354CE SM355CECapacity 90° - Round: Ø170mm Ø220mmCapacity 90° - Square: 170mm 220mmCapacity 90° - Rectangle (H x W): 95 x 210mm 110 x 255mmCapacity 60° - Round: Ø70mm Ø90mmCapacity 60° - Square: 60mm 85mmCapacity 45° - Round: Ø120mm Ø150mmCapacity 45° - Square: 110mm 145mmBlade Size: 20 x 0.9 x 2110mm 27 x 0.9 x 2460mmBlade Speed: 80mtr/min 72mtr/minCoolant Pump Power: 25W 25WMotor Power: 750W 1100WSupply: 230V - 1ph 230V - 1phOverall Size (W x D x H): 1500 x 800 x 1620mm 1720 x 800 x 1810mmWeight: 170kg 210kg

A

A B

B

C

Roller Stand 1 Roller 1200kg Capacity

Heavy-duty workshop roller stand suitable for industrialapplications. Roller fitted with industrial quality ball racesfor smooth action. Improves handling of long or awkwardstock and helps increase both productivity and accuracy.Capacity: 1200kgRoller Width: 300mmAdjustable Height: 570-790mmNumber of Rollers: 1Weight: 12.5kg

Model No. RS9

C

BLADES & BLADE SELECTION See opposite page for details of blades and blade selection.

Industrial Power Bandsaws

Manufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved. Saw arms are fitted with hydraulic damping toprevent the arm being dropped onto the workpiece and to ensure smooth cutting performance. Bow swivels up to 60° angle allowing work piece to always sit in a centralposition. Coolant fluid system and main power controls are switched on individual 24V/230V circuits for extra safety. Features auto and manual shut off switches givingthe user options of control when in use. Heavy-duty single phase electric motor.


255mmCapacity

210mmCapacity

Section 15 Power Bandsaws588

A B-

Industrial Power Bandsaw300mm

Manufactured to comply with Supply of Machinery(Safety) Regulations 1992 (and amendments) and fullyCE approved. Saw arm is fitted with hydraulic dampingto prevent the arm being dropped onto the workpieceand to ensure smooth cutting performance. Coolantfluid system and main power controls are switched onindividual 24V/230V circuits for extra safety. Heavy-duty single phase electric motor.

Capacity 90° - Round: Ø170mmCapacity 90° - Sq/Rect (H x W): 170 x 210mmCapacity 90° - Bar (H x W): 50 x 300mmCapacity 45° - Round: Ø110mmCapacity 45° - Sq/Rect (H x W): 170 x 110mmBlade Size: 19 x 0.81 x 2360mmBlade Speeds: 34, 41, 59, 98mtr/minMotor Power: 550WSupply: 230V - 1phWeight: 137kg

AModel No. SM35CE

A

B

Neat Cutting Oil 5ltr

Suitable for lubricating and cooling blade andworkpiece when cutting mild steel.Contents: 5ltr

DModel No. NCO/5L

D

Industrial Power Bandsaw400mm

Manufactured to comply with Supply of Machinery(Safety) Regulations 1992 (and amendments) and fullyCE approved. Saw arm is fitted with hydraulic dampingto prevent the arm being dropped onto the workpieceand to ensure smooth cutting performance. Coolantfluid system. Heavy-duty single phase electric motorwith over-current sensor on SM353CE model to cutpower in the event of blade jam.

Capacity 90° - Round: Ø230mmCapacity 90° - Sq/Rect (H x W): 230 x 370mmCapacity 90° - Bar (H x W): 30 x 400mmCapacity 45° - Round: Ø185mmCapacity 45° - Sq/Rect (H x W): 230 x 185mmBlade Size: 25.4 x 0.90 x 3035mmBlade Speeds: 25, 40, 51, 71mtr/minMotor Power: 1120WSupply: 230V - 1phWeight: 285kg

BModel No. SM353CE

Soluble Cutting Oil 5ltr

Suitable for lubricating and cooling blade andworkpiece when cutting mild steel.Contents: 5ltr

EModel No. SCO/5L

E

300mmCapacity

400mmCapacity

Power Bandsaw Blades

Bandsaw blades with hardened cutting edges. Suitablefor cutting steel, aluminium, brass, copper and plastics.

Model No: Tooth Pitch: Application:SM4.B14 14tpi SM4SM5/113/xx 6, 10, 14, 24tpi SM5, SM65SM658/B/xx 6, 10, 14, 24tpi SM658, SM6582SM35/Bxx 4, 8, 14, 18, 24tpi SM35CESM353CE/Bxx 4, 8, 14tpi SM353CESM353CE/085 4/6 Vari-Pitch, Bi-Metal SM353CESM354Bxx 3, 6, 14tpi SM354CESM355Bxx 3, 6, 14tpi SM355CENote: Substitute xx for tooth pitch at the end of modelno., i.e. SM35/B14 is 14tpi blade for SM35CE.


CORRECT SELECTION OF BLADESFor long blade life, it is important to select the correctblade for the material to be cut. As an example, weindicate here the relevant blade selection information forcutting steel (box section, angle iron and C-section): Material Size: 2-3mm 3-5mm Over 5mm Blade tpi: 18-24 14-18 8-14 Blade Speed: 24-71mtr per minute For information regarding blade selection for other materials,please contact our technical sales department. Bladebreakage caused by incorrect blade selection is not coveredby your guarantee.

Mobile

C

Section 15 Power Bandsaws 589

Power Hacksaw Blades

Manufactured from HSS stock and supplied individually.Model No. Application: Tooth Pitch:SM16/17/B/xx SM17/1 10, 14, 18tpiSM18/B/xx SM18/1 14, 24tpi*Please substitute required tooth pitch at the end ofthe Model No. i.e: SM16/17/B18 is an 18tpi blade forthe SM17/1.

Model No. SEE BELOW

Abrasive Disc Cut-Off Saw355mm

General purpose abrasive saw suitable for site use.Supplied with abrasive disc suitable for metal-cuttingbut will cut concrete with correct blade fitted. Triggeroperated, 1700W motor and hardened gears givesmooth transmission of power. Fitted with mitre vice.Size of Disc: Ø355 x 3 x 25.4mmCutting Disc: PTC/355CMaximum Cutting Capacity @ 90°: Bar - Ø70mm

Pipe - Ø80mmMaximum Cutting Capacity @ 45°: Bar - Ø70mm

Pipe - Ø75mmMotor: 1700W - 110VNo Load Speed: 3770rpmWeight: 19kg

EModel No. MG314/110V

E Ø355mm

Abrasive Disc Cut-Off Saw355mm

General purpose abrasive saw suitable for site use.Supplied with abrasive disc suitable for metal-cuttingbut will cut concrete with correct blade fitted. Triggeroperated, 2300W motor and hardened gears givesmooth transmission of power. Fitted with mitre vice.Size of Disc: Ø355 x 3 x 25.4mmCutting Disc: PTC/355CMaximum Cutting Capacity @ 90°: Bar - Ø100mm

Pipe - Ø110mmMaximum Cutting Capacity @ 45°: Bar - Ø40mm

Pipe - Ø50mmMotor: 2300W - 230VNo Load Speed: 3860rpmWeight: 21kg

DModel No. MG314/230V

D Ø355mm

Power Belt Sander

Heavy cast base with adjustable sanding table. Fittedwith magnetic no-volt release switch to preventaccidental starting after belt jam. Quiet and powerful230V - 750W motor. Suitable for metal and fabricationworkshops. Floor stand is an optional extra.

Belt Size: 100 x 1220mmBelt Speed: 19mtr/secFlat Grinding Surface: 320 x 105mmMotor: 750W - 230VWeight: 28kgOptional Floor Stand: SM100/STReplacement Belts:Model No: Grade:SM100/B080G 80 GritSM100/B100G 100 Grit

FModel No. SM100

F

Illustrated with optional SM100/ST stand.

C

C

110V230V

Power Hacksaws with Coolant System

Manufactured to comply with Supply of Machinery (Safety) Regulations 1992 (and amendments). Cast basewith integral mitring vice and setting bar for repetitive cutting. Machined saw arm runners with wear shims forsmooth cutting performance. Automatic power cut-off stops machine after completion of cutting. Fitted withheavy-duty 230Volt single phase electric motor and an approved 3-pin safety plug. Supplied with a belt drivencoolant pump system to lubricate and cool the workpiece. Fully guarded pulley and drive assembly.

Model No: SM17/1 SM18/1Capacity at 90°: 185 x 185mm 196 x 205mmCapacity at 45°: 90 x 185mm 110 x 205mmMotor: 375W - 230V 375W - 230VSize of Blade: 4400 x 25 x 1.25mm 400 x 32 x 1.60mmCutting Speed: 50/70strokes/min 60/80strokes/minWorking Floor Area Required: 1020 x 350mm 1050 x 370mmWeight: 115kg 140kg

Model No. SEE BELOW

A B-

A B-

Section 15 Power Hacksaws & Cut-Off Saws590

Cutting Capacities:Model No: SM2254 SM2504 SM3154

90°/45°: 30/25mm 40/35mm 80/70mm90°/45°: 65/60mm 75/65mm 100/90mm90°/45°: 65/60mm 65/58mm 90/80mm90°/45°: 80 x 55/65 x 50mm 90 x 50/70 x 50mm 115 x 70/85 x 70mm

Industrial Cut-Off Saws

Manufactured to meet latest safety regulations. Heavycast iron base with swivel head giving cutting anglesof 45-0-45° (0-45° for SM2254). Heavy-duty inductionmotor with two-stage safety switching and no-voltrelease circuitry prevents inadvertent re-start afterpower interruption. Fitted with 24Volt safety switchingcircuit to reduce risk of electric shock. Coolant system,vice and bar stop included. Designed for cuttingferrous metals. Supplied without blade. Optionalstands are available for SM2504 and SM3154, ModelNos. SM2504ST and SM3154ST respectively.

Model No: SM2254Blade Ø: 225mmMotor Power: 750WSupply: 230V - 1phBlade Speed: 52rpmVice Capacity: 80mmWeight: 60kg

Model No: SM2504Blade Ø: 250mmMotor Power: 970WSupply: 230V - 1phBlade Speed: 42rpmVice Capacity: 100mmWeight: 85kg

Model No: SM3154Blade Ø: 315mmMotor Power: 1640WSupply: 415V - 3phBlade Speed: 42/84rpmVice Capacity: 120mmWeight: 165kg

Model No. SEE BELOW

B

Stands for Cut-Off Saws

Manufactured from thick gauge steel plate. Suppliedflat packed.

Model No: Application:SM2504ST SM2504SM3154ST SM3154

Model No. SEE BELOW

DC

A

Replacement Cut-Off Saw Blades

Model No: TPU: Application:SM225/B80 80 SM2554SM225/B140 140 SM2254SM225/B220 220 SM2254SM250/B80 80 SM2504SM250/B100 100 SM2504SM250/B160 160 SM2504SM250/B250 250 SM2504SM300/B120 120 SM3154SM300/B160 160 SM3154SM300/B180 180 SM3154SM300/B220 220 SM3154


E

CB

A

B

C

ED

A C-

D E-

A

Deluxe Brow Guard with FullFace Shield

BSEN166/B39 - Ratchet adjustable headband with frontand back padding for extra comfort. Premium quality forautomotive, agricultural and industrial applications.

FModel No. SSP11

F

Ø225mm

Ø250mm

Ø315mm

230V

230V

415V

Section 15 Cut-Off Saws 591

Section 15 Bench Grinders592

150mm Bench Grinder

Compact design bench grinder with powerful inductionmotor for general workshop use. Supplied with eyeshields, spark arrestors and tool rests. Fully CEapproved electrics for operator safety. Supplied withcoarse and fine aluminous oxide grinding stones forgeneral workshop grinding and sharpening.Supplied with: 2 x StoneMotor: 150WSupply: 230VAxle Diameter: 13mmNo Load Speed: 2950rpmWeight: 6kg

AModel No. BG150CX

A

D

B

150mm Heavy-Duty BenchGrinder & Brush Combination

High power and high duty cycle induction motor suitablefor constant professional use. Fitted with stone guards,adjustable eyeshields and spark arrestors. Full CEspecification in respect of electrics, wheel guards andflanges meets all regulations for use in the workplace.Supplied with one aluminous oxide stone and one wirebrush for cleaning and descaling operations.

Supplied with: 1 x Stone, 1 x Wire BrushMotor: 450WSupply: 230VAxle Diameter: 13mmNo Load Speed: 2850rpmWeight: 12kg

EModel No. BG150XW/99

E

150mm Workshop BenchGrinder

Induction motor drive suitable for general use. Fittedwith stone guards, adjustable eyeshields and sparkarrestors. Fully CE approved electrics for operatorsafety. Supplied with coarse and fine aluminous oxidestones for general workshop grinding and sharpening.

Supplied with: 2 x StoneMotor: 375WSupply: 230VAxle Diameter: 13mmNo Load Speed: 2850rpmWeight: 12kg

BModel No. BG150XL/96

Bench Grinder Floor Stand

Bench grinder stand with adjustable feet. Suits a widevariety of bench grinders with central mounting holes.Suitable for the following Sealey machines:BG150XD/99, BG150XL/96, BG150XLW/98,BG5150XW/99, BG200XL, BG200/99.Size (H x W x D): 900 x 465 x 465mm

Due to variations in the base configuration on thebench grinders, some modification to the stand topplate/frame may be required.

H

H

Sander & Grinder Floor Stand

Suitable for all the following Sealey machines:BG150XD/99, BG150XL/96, BG150XLW/98,BG150XW/99, BG200XL, BG200/99.Also suitable for other leading brands of bench grinders.

Size (H x W x D): 830 x 290 x 280mm

FModel No. SM57/ST

F

150mm Workshop BenchGrinder & Brush Combination

Induction motor drive suitable for general use. Fittedwith stone guards, adjustable eyeshields and sparkarrestors. Fully CE approved electrics for operatorsafety. Supplied with one coarse aluminous oxidestone and wire brush for general workshop grinding,sharpening and descaling work.Supplied with: 1 x Stone, 1 x Wire BrushMotor: 375WSupply: 230VAxle Diameter: 13mmNo Load Speed: 2850rpmWeight: 11kg

CModel No. BG150XLW/98

C

G

150mm Heavy-Duty BenchGrinder

High power and high duty cycle induction motor suitablefor constant professional use. Fitted with stone guards,adjustable eyeshields and spark arrestors. Full CEspecification in respect of electrics, wheel guards andflanges meets all regulations for use in the workplace.Supplied with coarse and fine aluminous oxide stonesfor general workshop grinding and sharpening.


DModel No. BG150XD/99

Ø150mmStones

Ø150mmStones

Ø150mmStone

Ø150mmStones

Ø150mm Wire Wheel

(Bench Grinder not included)

Model No. BGST

Grinding Wheel Dresser

Aluminium alloy body with four star wheels. Suitablefor cleaning, sharpening and trueing grinding wheelsurfaces. Suitable for use with any grinder.

Length: 150mm

GModel No. BG1

Ø150mm Wire WheelØ150mm

Stone

200mm Heavy-Duty Bench Grinder

High power induction motor suitable for workshop use. Fitted with aluminous oxidegrinding wheels and suitable for general sharpening and grinding applications.Equipped with fully CE approved safety guards and wheel location flanges to meetcurrent EU abrasive wheel regulations. Motor and switchgear meet CE low voltageand EMC directives. Fitted with an ASTA/BS approved safety plug.


AModel No. BG200XL

BA

Bench Grinder Stones

Aluminous oxide stones suitable for all generalpurpose applications. All our 150mm grinding stonesfit 13mm axles and are supplied with 32-13mmreduction bushes where applicable.Model No: Size: Grit:NBG150/GWC Ø150 x 16 x 13mm A36Q CoarseNBG150/GWF Ø150 x 16 x 13mm A60P FineBG150/15 Ø150 x 20 x 32(13)mm A60P FineBG150/16 Ø150 x 20 x 32(13)mm A36Q CoarseBG200/15 Ø200 x 25 x 16mm A60P FineBG200/16 Ø200 x 25 x 16mm A36Q Coarse

Model No. SEE BELOW

Bench Grinder Wire Wheels

Suitable for general workshop/descaling operations.Model No: Size: Width:BG150/WW1 Ø150 x 13 x 13mm NarrowBG150/WW2 Ø150 x 20 x 13mm WideBG200/WW1 Ø200 x 13 x 16mm Narrow

Model No. SEE BELOW

D

DE

E

Ø200mmStones

Ø200mmStones

G

200mm Heavy-Duty Bench Grinder

High power induction motor suitable for workshop use. High duty cycle performanceis particularly recommended for frequent use applications. Equipped with fully CEapproved safety guards and wheel location flanges to meet current EU abrasivewheel regulations. Motor and switchgear meet CE low voltage and EMC directives.Fitted with an ASTA/BS approved safety plug.


BModel No. BG200/99

Wire Brushes

Suitable for use with angle grinders or pillar drills. Seepage 572 for full details.Model No: Type: Diameter:CBC100 Brassed Steel Cup Brush 100mmSCB75 Wire Cup Brush 75mmSFB75 Flat Wire Brush 75mmTKCB100 Twist Knot Cup Brush 100mm

Model No. SEE BELOW

G

C

Ø250mmStone

Ø125mmStone

125mm Bench Grinder with250mm Wet Stone

Meets Supply of Machinery (Safety) Regulations 1992(and amendments). Supplied with 230V olt inductionmotor and is fully guarded and suitable for workshopuse. Supplied with Ø250mm wet stone and Ø125mmdry stone, ready for use. Double insulated for extraoperator safety. Suitable for sharpening fine blades.Dry Grinding Stone Dimensions: Ø125 x 16 x 13mmDry Grinding Stone: SM52/GW125Dry Grinding Speed: 2800rpmWet Grinding Stone Dimensions: Ø250 x 50 x 22mmWet Grinding Stone: SM52/GW250WWet Grinding Speed: 60rpmMotor: 185W - 230V

CModel No. SM52

Bench Grinder Buffing Wheels

Cotton buffing wheels suitable for use with Sealey andother brand bench grinders. Made entirely from cottonand manufactured to a soft density to ensure the workpiece is finished at the highest standard.Model No: Size: Ply: Arbor Size: BG150BW Ø150 x 13mm 32 Ø13mmBG200BW Ø200 x 16mm 40 Ø16mm


F

WIRE BRUSHESWe stock a comprehensiverange of Wire Brushes, seepage 602 for full details.

Section 15 Bench Grinders 593

F

E

Compound Cross Vices

Cast construction with precision machined compoundslides. Fitted with replaceable steel jaws, locking slidesand metric calibrated lead screws. Suitable for drillingand machining operations.

Model No: CV4Jaw Width: 100mmJaw Depth: 35mmJaw Opening: 100mmHeight: 165mmTravel: 100 x 100mm




Mitre Clamps

Universal corner, mitre and drill press vice. Die castbody with mounting plates. Model No. CMV65 withswivel jaw and thread action allows for multi-sizeworkpiece clamping, CMV65Q features quick actiontwin jaws for fast operation.

Model No: Jaw Jaw JawWidth: Depth: Opening:

CMV65 60mm 35mm 70mmCMV65Q 70mm 25mm 65mm

Model No. SEE BELOW

G

C

C C

C

3-Way Drill Vice 100mm

3-Way mounting on side, end or base. Recommendedfor use on any pillar drill, milling machine orsurface grinder. Accurately ground surfaces ensuresquareness in three planes.Jaw Width: 100mmJaw Depth: 30mmJaw Opening: 90mm

CModel No. DV3D

Drill Vices

Cast construction with machined foot and articulatedhandle. Fitted with replaceable steel jaws.

Model No: Jaw Width: Jaw Depth: Jaw Opening:DPV2.5 65mm 22mm 55mmDPV3 82mm 23mm 75mmDPV4 100mm 22mm 102mmDPV5 125mm 24mm 125mmDPV6 150mm 27mm 147mm


A B

Deluxe Drill Vices

Steel construction with stepped jaws and machinedfoot suitable for hand-held use or for drill tablemounting using two bolt-slides machined into thecasting. Fitted with replaceable jaws.

Model No: Jaw Width: Jaw Depth: Jaw Opening:100DV 104mm 32mm 100/108mm120DV 132mm 38mm 120/130mm


Multi Angle Vice 125mm

Bench mounting, heavy-duty vice with cast iron body.360° rotating/locking jaws enable workpiece to bepositioned at all angles. Smooth rolled thread foraccurate clamping. Includes an integral anvil. V -Jawespecially designed for securing pipe work up toØ71mm. Guaranteed for two years against breakage.

Jaw Width: 125mmJaw Opening: 120mmJaw Depth: 72mm

DModel No. New CV125MAV

D

H

Clamping Kit 52pc

Ensures the firm clamping of most sizes of workpiecewhilst drilling and milling. T-Nuts and screws includedsuitable for attachment to slots in drilling/milling table.Fits most popular makes of drilling/milling machines.

HModel No. SM25/52T

F G-

FG

QuickAction

D

Section 15 Drill Vices & Clamps594

All Steel VicesHeavy-Duty

Bench mounting, heavy-duty steel vices suitable for workshop, garage andmachine-shop use. Fixed base directly mounts onto work bench and a swivel viceplate adaptor is available as an optional extra for models up to 200mm. All modelsin this series include an anvil. Guaranteed for five years against breakage.Model No: Jaw Width: Jaw Opening: Weight: Optional Swivel

Adaptor Plate:ASV100 100mm 118mm 7.5kg VSB4ASV125 125mm 140mm 10.4kg VSB5ASV150 150mm 180mm 14.1kg VSB6ASV200 200mm 225mm 18.6kg VSB8ASV250 250mm 250mm 25.7kg -


C

All Steel VicesLight-Duty

Light-duty bench mounting steel vices, suitable for workshop, garage and machine-shop use. Fixed base mounts directly onto work bench. Guaranteed for two yearsagainst breakage.


D

Cast Iron Engineer’s VicesHeavy-Duty

Bench mounting, heavy-duty vices with cast iron body and replaceable, serratedsteel jaws. Smooth rolled thread for accurate clamping. Models include an anvil.Guaranteed for two years against breakage.Model No: Jaw Size: Jaw Opening: Weight:CV75XT 75mm 95mm 5.2kgCV100XT 100mm 100mm 9.1kgCV125XT 125mm 125mm 13.1kgCV150XT 150mm 150mm 22.1kgCV200XT 200mm 175mm 36.0kg


B

Quick Action Cast Iron VicesHeavy-Duty

Bench mounting, heavy-duty vices with cast iron body and replaceable, serratedsteel jaws. Smooth rolled thread for accurate clamping. Features quick-slide actionfor adjusting jaw opening and clamping workpiece. Includes an integral anvil.Guaranteed for two years against breakage.

Model No: Jaw Size: Jaw Opening: Weight:CV100QV New 100mm 155mm 10.0kgCV150QV 150mm 160mm 15.0kgCV200QV 200mm 210mm 27.0kg


F

QuickAction

Quick Action Cast Iron VicesLight-Duty

Bench mounting, lightweight, light-duty vices with cast iron body, swivel base andreplaceable, serrated steel jaws. Smooth rolled thread for accurate clamping.Features quick-slide action for adjusting jaw opening and clamping workpiece.Includes an integral anvil. Guaranteed for two years against breakage.

Model No: Jaw Size: Jaw Opening: Weight:CV100QVE 100mm 110mm 5.0kgCV150QVE 150mm 150mm 9.0kg


E

QuickAction

Model No: Jaw Size: Jaw Opening: Weight:ASVE125 125mm 140mm 7.8kgASVE150 148mm 180mm 11.0kgASVE200 195mm 156mm 12.2kg

Cast Iron Engineer’s VicesLight-Duty

Bench mounting vices with cast iron body and replaceable, serrated, steel jaws.Smooth rolled thread for accurate clamping. Models feature an anvil. Suitable forworkshop, garage and machine shop use. Guaranteed for two years againstbreakage.

Model No: Jaw Size: Jaw Opening: Weight:CV100E 100mm 100mm 6.6kgCV125E 125mm 125mm 9.7kgCV150E 150mm 150mm 12.9kgCV200E 200mm 200mm 19.3kg


A

Optional swivel adaptorplates available, see below.

Section 15 Bench Vices 595

Section 16Engineering Tools597 Vices598 Micrometers599 Callipers600 Stands & Gauges601 Measuring Tools602 Wire Brushes603 Files, Sharpening Stone & Hacksaws604 Tap & Die Sets606 Thread Cutting Tools607 Extractors & Nut Splitters608 Punches & Chisels

Universal Vice 70mm

Rubber padded base for easy bench mounting. V iceswivels to any position and is locked by lever on base.Fitted with smooth action lead screw for controllableclamping. Fully enclosed, rubber faced jaws provideeven clamping force. Fitted with replaceable jaws.Suitable for model makers and craftsmen.

Jaw Width: 70mmOpening: 70mmJaw Height: 45mmMounting Height: 65mmWeight: 1.6kg

AModel No. UV70

A

Universal Vice 70mm withDrill Clamp

Bench mounting with swivel base. For use inconjunction with a drill. Fitted with smooth action leadscrew for controllable clamping, vice swivels ±45°.Fully enclosed, rubber faced jaws provide evenclamping force. Includes drill clamp and hex key .Suitable for model makers and craftsmen.

Jaw Width: 70mmOpening: 50mmJaw Height: 40mmMounting Height: 50mmWeight: 1kg

BModel No. UV70DC

B

Universal Vice 70mmSuction Base

Bench mounting with powerful suction base andlocking handle. Swivel head for precise positioning.Smooth action lead screw for controllable clamping.Fully enclosed, rubber faced jaws provide evenclamping force. Fitted with replaceable jaws. Suitablefor model makers and craftsmen.

Jaw Width: 70mmOpening: 70mmJaw Height: 40mmWeight: 1kg

CModel No. UV70SB

C

Fixed Vice 80mm

Bench mounting with steel jaws. Fitted withreplaceable jaws - clamp type mounting. Fitted withsmooth action lead screw for controllable clamping.Suitable for model makers and craftsmen.

Jaw Width: 80mmOpening: 65mmJaw Height: 45mmMounting Height: 35mmWeight: 1kg

DModel No. FV80

D

Mitre Clamp 60mm

Universal corner, mitre and drill press vice. Die-castbody with mounting plates. Swivel jaw and threadaction allows for multi-size workpiece clamping.

Jaw Width: 60mmJaw Depth: 35mmJaw Opening: 70mm

EModel No. CMV65

E

Quick Action Mitre Clamp 70mm

Universal corner, mitre and drill press vice. Die-castbody with mounting plates. Quick action twin jaws forfast operation.


FModel No. CMV65Q

F

Cast Iron Engineer’s Vice

Bench mounting, heavy-duty vice with cast iron bodyand replaceable, serrated steel jaws. Smooth rolledthread for accurate clamping. Includes an anvil.Guaranteed for two years against breakages.

Jaw Size: 150mmJaw Opening: 150mmWeight: 22.1kg

HModel No. CV150XT

H

G

G

G G

3-Way Drill Vice 100mm

3-Way mounting, on side, end or base. Recommendedfor use on any pillar drill, milling machine orsurface grinder. Accurately ground surfaces ensuresquareness in three planes.Jaw Width: 100mmJaw Depth: 30mmJaw Opening: 90mm

GModel No. DV3D

See pages 594 & 595 for our full range of Engineer’s Bench & Drill Vices.

Section 16 Vices 597

A

Micrometer Set 3pc Metric0-75mm

Set comprising Metric micrometers from the standardrange. Supplied in foam lined, composite case withtwo calibrated extension bars and thimble wrench.

Contents: AK9630M; 0-25mm, AK9632M; 25-50mm,AK9633M; 50-75mm

BModel No. AK9651M

B

D

F

E

1

2

3

Seven-button control of the micrometer ’s operatingfunctions. Instant switching between Metric and Imperialscales. Features tolerance and relative functions.

Surface Gauge 225mm &300mm Spindles

Flat ground, polished and hardened steel base.Incorporates V-groove for use on pipes and cylindersand twin retractable pegs for use against the edge ofsurface plate. Supplied with double-ended scriber .Spring loaded fine adjustment gives added control.Locking head incorporates mechanism for securingDTI. Supplied with 225 and 300mm spindle.

Spindle Heights: 225, 300mm

EModel No. AK9798

MM & IMPMM & IMP

MM & IMPMM & IMP

Digital Height Gauge 0-300mm

Precision ground base with six-button electronicgauge. Includes fine adjustment control carriage foraccurate use. Six-digit LCD read-out displays in Metricor Imperial. Features absolute and comparativefunctions. Tolerance function enables fast check ofbatch work. Fitted with RS232 interface port. Suppliedwith scriber foot and clamp. Powered by SW44W cell(included) and supplied with storage case.

Range: 0-300mm/0-12”Graduation: 0.01mm/0.0001”

FModel No. AK9636D

C

Digital Measuring Set 2pc

Seven button digital micrometer with satin chromethimble and sleeve plus hardened and temperedstainless steel digital vernier calliper with satinfinish. Large, easy-to-read LCD read-outs. Displaysswitchable between Metric and Imperial units. Zerodisplay at any point allows comparative measurement.Both instruments include serial port for connection tocomputer. Supplied in storage case with micrometeradjustment wrench.

MicrometerRange: 0-25mm/0-1”Graduation: 0.001mm/0.00005”Accuracy: ±0.001mm/0.00005”Cell Qty x Type: 1 x LR44 (1.5V)

CalliperRange: 0-150mm/0-6”Resolution: 0.01mm/0.0005”Accuracy <100mm: ±0.02mm/0.001”Accuracy 100-150mm: ±0.03mm/0.001”Cell Qty x Type: 1 x LR44 (1.5V)

CModel No. AK9637D

Digital External Micrometer

Seven button digital micrometer with satin chromethimble and sleeve. Large, easy-to-read 9mm highLCD read-out. Display switchable between Metric andImperial units. Zero display in any position for relativeand tolerance readings. Auto power off. Includes serialport connection for computer interface. Supplied withadjustment wrench and storage case.

Range: 0-25mm/0-1”Graduation: 0.001mm/0.00005”Cell Qty x Type: 1 x LR44 (1.5V)

DModel No. AK9635D

MM & IMPMM & IMP

MMMM MMMM

C

D

External Micrometers

Brushed steel yoke. Satin chrome finished thimble and sleeve with heavily machined knurling and locking mechanism.Supplied with thimble adjustment wrench. On 25-50mm and 50-75mm models a calibrated spacer is also included.Model No: Range: Accuracy:

AK9630M 0-25mm 0.01mmAK9632M 25-50mm 0.01mmAK9633M 50-75mm 0.01mm


3

12

Section 16 Micrometers598

AK9622 & AK9623Supplied in carry-case

D

A

B C

1

1

2

3

3

2

Supplied in carry-case

MEASURING TAPESSee page 633 for our fullrange of Measuring Tapes.

Supplied in carry-case

Digital Vernier Callipers Stainless Steel

Hardened and tempered stainless steel digital calliper with satin finish. Large LCD display with 1 1mm highfigures for ease of reading. Metric and Imperial calibration with conversion between the two. Zero settingcontrol allows comparative measurement. Supplied in carry-case.

Model No: AK9621EV AK9624EVRange: 0-150mm/0-6” 0-200mm/0-8”Resolution: 0.01mm/0.0005” 0.01mm/0.0005”Accuracy: ±0.03mm/0.001” ±0.03mm/0.001”Cell Qty x Type: 1 x LR44 (1.5V) 1 x LR44 (1.5V)


21

2

1

Vernier Callipers

High quality, hardened and tempered stainless steel calliper. Dual locking carriage with micro-thumb adjustment. Metricand Imperial scales graduated in 0.02mm and 0.001”. Supplied in PVC wallet (AK962) or carry-case (AK9622 & AK9623).Model No: Range:

AK962 0-150mm/0-6”AK9622 0-200mm/0-8”AK9623 0-300mm/0-12”


3

12

Digital Vernier Callipers

Hardened and tempered stainless steel digital calliper with satin finish. Large LCD display with 1 1mm highfigures for ease of reading. Metric and Imperial calibration with conversion between the two. Zero setting controlallows for comparative measurement. Supplied in carry-case.

Model No: AK962EV AK9622EV AK9623EVRange: 0-150mm/0-6” 0-200mm/0-8” 0-300mm/0-12”Resolution: 0.01mm/0.0005” 0.01mm/0.0005” 0.01mm/0.0005”Accuracy <100mm: ±0.02mm/0.001” ±0.02mm/0.001” ±0.02mm/0.001”Accuracy >100mm: ±0.03mm/0.001” ±0.03mm/0.001” ±0.04mm/0.001”Cell Qty x Type: 1 x LR44 (1.5V) 1 x LR44 (1.5V) 1 x LR44 (1.5V)


31 2E

Precision Measuring Set 4pc

High quality set of measuring and comparison tools inone case. Suitable for most engineering applications.Supplied in storage case.Contents: Specification:Micrometer 25mm - Accuracy ±0.01mmVernier Calliper 0-150mm/0-6”Precision Square 100mm/4”Steel Rule 150mm/6”Thimble Wrench for micrometer included.

EModel No. AK9650

Measuring & Marking Set 3pc

Set consists of a vernier calliper and steel rule withpocket clip, both having Metric and Imperial scales,plus a scriber with knurled grip.Calliper Range: 0-125mm/0-5”Rule: 0-152mm/0-6”Scriber Length: 175mm

CModel No. AK11002

Section 16 Callipers 599

Section 16 Stands & Gauges600

A B C

D

Dial Gauge Indicators

Precision mechanism with Ø55mm dial and locking,rotating bezel. Interchangeable foot. Model No. AK961fitted with mounting lug.

Model No: AK961MType: MetricDeflection/Travel: 10mmGraduation: 0.01mmShank Size: Ø8mm

Model No: AK961Type: ImperialDeflection/Travel: 0-0.5”Graduation: 0.001”Shank Size: Ø9.5mm

Model No. SEE BELOW

E G

F

E F-

E

F

Magnetic Stand

Precision ground stand base with rotary controlledmagnet. Suitable for use with scribers and dial gauges.Maximum Height: 365mmFootprint: 62 x 50mm

AModel No. AK958

Flexible Magnetic Stand

Articulated main shaft with cam action lock. Microadjusting head. Powerful magnetic base with rotarycontrol and precision ground surfaces.

Maximum Height: 385mmFootprint: 64 x 50mm

CModel No. AK959

Magnetic Stand with FineAdjustment

Precision ground stand base with rotary controlledmagnet. Fine arm adjustment allows close control.Suitable for use with scribers and dial gauges.

Maximum Height: 365mmFootprint: 62 x 50mm

BModel No. AK9581

Mini Dial Gauge

Compact design and precision mechanism, idealfor automotive applications and general purposeworkshop use. Ø42mm Dial and rotating bezel.Available in Metric format only.

Deflection/Travel: 8mmGraduation: 0.01mmShank Size: Ø8mm

GModel No. AK9634M

Heavy-Duty Magnetic Stand

Precision ground base with rotary magnetic control.Articulated arm with rotary lock. Combination dial andscribing clamp with fine adjustment control.Maximum Height: 375mmFootprint: 64 x 50mm

DModel No. AK960

MMMM MMMMIMPIMP

H

Precision Steel Square SetBS939(B) 4pc

Quality made solid steel construction. Hardened,tempered and precision polished. Manufactured tomeet squareness tolerance contained in BS939(B).Blade edges and stock face to within ±0.016mmtolerance. Supplied in wooden carry-case.Contents: 50, 75, 100, 150mm

HModel No. AK11000

Precision Steel SquaresBS939(B)

Quality made solid steel construction. Hardened,tempered and precision polished. Manufactured tomeet squareness tolerance contained in BS939(B).Blade edges and stock face to within ±0.016mmtolerance.Model No: Length:

AK11100 100mmAK11150 150mm

Model No. SEE BELOW

I J-

IJ

I

J

ON-VEHICLE APPLICATIONS

Dial gauges onmagnetic stands arealso suitable formeasuring run-outor distortion onbrake discs. Seepages 306 to 314for more BrakeTools.

Magnifying Glasses

Lightweight composite handle housing a glass lenswith x5 magnification. Ideal for enlarging small workareas for detailed inspection. Hanging hole for storage.

Model No: AK9646 AK9647Lens Type: Glass GlassLens Diameter: 50mm 75mmOverall Length: 140mm 195mm

Spring Divider & CallipersSquare Leg

Professional style callipers with solid square leg profilefor added rigidity and precise comparison. Quickrelease screw mechanism for ease of use.

Model No Type: Capacity:AK9765 Divider 150mmAK9775 External 150mmAK9785 Internal 150mm

A

Spring Divider & Callipers

200mm Capacity with spring loaded action. Knurledthumb screw for fine adjustment.

Model No: Type: Capacity:AK9761 Divider 200mmAK9771 External 200mmAK9781 Internal 200mm

Model No. SEE BELOW

E

F

G

Model No. SEE BELOW

B

E G-

B D-

C

D

J

Engineer’s Double-EndedScriber

Precision manufactured tool with hardened steel tips.Features straight and 90° tips with knurled body.

Length: 200mm

NModel No. AK9751

N

Carbide Tipped Scriber

Fitted with pocket clip. Suitable for use on glass,metals and ceramics. Ideal for machinists, welders,tinsmiths and hobbyists.

Length: 150mm

MModel No. AK9752

M


Chromed brass barrel with spring loaded tip and depthadjustment on driver ball.

Length: 135mm

KModel No. AK9119


Knurled brass barrel with spring loaded alloy steel point.

Length: 125mm

LModel No. AK9121

K

L

B

H I

CD

EFG

Professional Measuring Set 6pc

Precision measuring instrument set containing sixessential tools for the engineer/tradesman.

Contents: Vernier Callipers, Depth/Angle Gauge, Outside Callipers, Dividers, Inside Callipers, Pocket Rule with Clip

AModel No. AK10000

Stainless Steel Rules

High quality steel rules permanently marked in Metricand Imperial graduations. All rules include hanging hole.Model No: Length:AK9640 150mm/6”AK9641 300mm/12”AK9642 600mm/24” AK9643 1000mm/40”



H

I

H I-

Section 16 Measuring Tools 601

Section 16 Wire Brushes602

Miniature Brush Set 3pc

Composite stocked brush set with hanging locationholes. Steel, nylon and brass filled heads. Suitable forcleaning spark plugs and smaller engineeringcomponents.

Length Fill/Overall: 40/180mm

AModel No. AK9791

A

Auto Engineer’s Wire Brush Set3pc

Composite handles with hanging holes. Small andmedium (35 and 110mm headed) brass filled brushesfor components such as plugs and contacts and alarge steel filled brush (110mm head) for removal ofrust and welding slag.Length Fill/Overall: 90/225mm Steel, 35/175mm Brass, 90/225mm Brass

BModel No. AK9801

B

General Purpose Wire Brush

Composite handle with curved, folded alloy stock.Brassed steel filament fill.

Pack Qty: SingleLength Fill/Overall: 120/250mm

DModel No. WB05/R

D

Light Enhancing SafetySpectacles

BSEN166/F - Amber lens provides better contrastenhancement. Comfortable silicon nose bridge andpre-set sports arms.

IModel No. SSP46

IG

Engineer’s Wire Brush

Wooden stocked brush with steel fill. Suitable forgeneral purpose applications.

Length Fill/Overall: 130/260mmFill Pattern: 4 Rows of 16

GModel No. WB02

See pages 707 to 717 for our full range of safetyproducts.

Wire Brush with Steel FillSoftgrip Handle

Comfortable softgrip brush with steel fill. Suitable forgeneral purpose applications.

Length: 170mm

CModel No. New WB08

C

General Purpose Wire BrushDisplay Box of 24

Composite handle with curved, folded alloy stock.Brassed steel filament fill.

Pack Qty: Display Box of 24Length Fill/Overall: 120/250mm

EModel No. New WB05DB24

E

H

Engineer’s Wire Brushwith Scraper

Wooden stocked brush with steel fill. Fitted with steelscraper. Suitable for general purpose applications.

Length Fill/Overall: 130/260mmFill Pattern: 4 Rows of 16

HModel No. WB03

F

Wire Brush Set 2pc

Skeletal handle with crimped steel fill. Suitable forgeneral purpose applications.

Length Fill/Overall: 65/210mm, 90/235mm

FModel No. WB06

J

Vari-Pitch Bi-Metal 300mmHacksaw Blades

Bi-metal blades with unique variable pitch profileteeth for superior performance on a wide range ofmaterials. Standard pitch 20-24tpi.Model No: Qty:HSB/1 SingleHSB/10 Pack of 10HSB/50 Pack of 50


Engineer’s 300mm Hacksaw

Die-cast handle and stock. Micro adjusting bladetension device allows rapid blade changes without theneed to adjust the tensioning every time. Twin (90° and45°) blade positions and cushion-grip for comfortableand accurate cutting. Compass saw capability .Supplied with quality bi-metal hacksaw blade suitablefor cutting a variety of materials.

LModel No. AK8692

L

Engineer’s File Set 3pc

Popular set of assorted files with comfort grip handles.Each file is double cut for faster removal of materialfrom workpiece.Length: 200mmContents: Flat, Half Round, Round

CModel No. AK572

C

Needle File Set 10pc

Popular sized needle files. Knurled handle shafts forextra grip. Average overall length 140mm.Contents: Flat Parallel, Flat Taper, Half-Round, Three-Square, Square Form, Round Form, Oval Form, Knife Form, Crossing File, Barrette File

AModel No. AK576

A

Diamond/Needle File Set 10pc

Popular sized diamond needle files. Vinyl dipped handleshafts for extra comfort. Average overall length 140mm.Contents: Flat Parallel, Flat Taper, Half-Round, Three-Square, Square Form, Round Form, Oval Form, Knife Form, Crossing File, Barrette File

BModel No. New AK577

B

Engineer’s & Needle File Set10pc

Selection of popular engineer's files and needle fileswith soft grip handles for comfort and control. Eachfile is double cut for faster removal of material fromworkpiece.Contents: Engineer's Files; Half-Round, Round, Flat, Three-Square, Needle Files; Half-Round, Round, Flat, Flat Taper, Square, Three-Square

DModel No. New AK578

D E

Junior Hacksaw 150mm withAdjustable Blade

Rigid die-cast aluminium frame with comfortablecomposite handle. Multi-position blade clamp permitsblade to be mounted in any one of six positions.Supplied with 150mm general purpose blade.

IModel No. AK8680

I

H

Junior Hacksaw Blades

150mm General purpose hacksaw blades suitable forSiegen S0527, Sealey AK868, AK8680 and AK8682.Supplied in packs of 10.

FModel No. AK868/B

F

Junior Hacksaw 150mm

Steel construction with bright chrome plating. Suppliedwith finger guard and two 150mm blades.

GModel No. AK868

G

K

Mini Hacksaw with Bi-Metal Blade

Die-cast zinc frame for durability . Ideal for use inconfined spaces. Accepts 250, 300mm and even brokenblades. Supplied with quality bi-metal hacksaw blade.

KModel No. AK8696

Junior Hacksaw 150mm

Rigid steel frame and profiled handle for comfortablegrip. Accepts standard 150mm hacksaw blades. Quickand easy blade release with micro adjustment.Supplied with blade.

HModel No. AK8682

Diamond Grit Sharpening Stone4 Sided

For fast, ef ficient use when removing burrs on aworkpiece or sharpening a blade. Four colour codedgrits allow easy choice for application requirements.Supplied in a tough composite storage/work box withanti-slip base for added stability.Colour/Grit: Yellow/#200, Red/#300, Green/#400,Blue/#600Stone Dimensions (W x D x H ): 150 x 50 x 50mm

EModel No. New DSS4

Section 16 Files, Sharpening Stone & Hacksaws 603

E

Tap & Die Set 21pc Metric

High carbon steel taps and dies. Dies with machined lead-ins for ease of use. Setincludes one long handled adjustable tap wrench with professional type sliding jaw and steel die holder with retention screw. Supplied in carry-case.

Contents: Taps and Dies; 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 7 x 1.0, 8 x 1.25,10 x 1.5, 12 x 1.75mm, 1/8” NPT, Tap Wrench, Die Holder, Screwdriver

BModel No. AK300

B

Tap & Die Set 40pc Metric

High carbon steel taps and dies. Dies with machined lead-ins for ease of use. Setincludes one long handled adjustable tap wrench with professional type sliding jawand steel die holder with retention screw . Also includes T-Bar type tap wrench,screwdriver and thread gauge. Supplied in carry-case.Contents: Taps and Dies; 3 x 0.5, 3 x 0.6, 4 x 0.7, 4 x 0.75, 5 x 0.8, 5 x 0.9,6 x 0.75, 6 x 1.0, 7 x 0.75, 7 x 1.0, 8 x 1.0, 8 x 1.25, 10 x 1.25, 10 x 1.5, 12 x 1.5, 12 x 1.75mm, 1/8” NPT , Tap Wrench, T-Bar Tap Wrench, Die Holder , ThreadGauge, Screwdriver

DModel No. AK301

Tap & Die Set 40pcSplit Dies Metric

Tungsten steel taps and dies. Professional style split dies with machined lead-ins forease of use and accurate thread cutting. Professional type tap wrench with movingjaw and steel die holder with three knurled retaining screws for fine adjustment ofdie split. Supplied in carry-case.Contents: Taps and Dies; 3 x 0.5, 3 x 0.6, 4 x 0.7, 4 x 0.75, 5 x 0.8, 5 x 0.9,6 x 0.75, 6 x 1.0, 7 x 0.75, 7 x 1.0, 8 x 1.0, 8 x 1.25, 10 x 1.25, 10 x 1.5, 12 x 1.5,12 x 1.75mm, 1/8”NPT, Tap Wrench, T-Type Tap Wrench, Screwdriver, Die Holder, Thread Gauge

EModel No. AK3012

D

SplitDies

21pc

40pc40pc

C

C

SplitDies

21pc


Tungsten steel taps and dies. Professional style split dies with machined lead-ins forease of use and accurate thread cutting. Professional type tap wrench with movingjaw and steel die holder with three knurled retaining screws for fine adjustment ofdie split. Supplied in carry-case.Contents: Taps and Dies; 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 7 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75mm, 1/8”NPT, Tap Wrench, Die Holder, Screwdriver

CModel No. AK3002

A

Ratcheting Tap & Die Tool Set 3/8”Sq Drive 6pc

Manufactured from high quality Chrome Vanadium steel. Ratchet helps to eliminatehand-over-hand turning and is ideal for use in confined areas where access isrestricted. Includes a 72-tooth, twist reverse, ratcheting T-handle, 2 x die sockets, 2x tap chucks and double open-end wrench. Supplied in a heavy-duty storage case.

Contents: 3/8”Sq Drive 72-Tooth Twist Reverse Ratcheting T-Handle,2 x Die Sockets, 2 x Tap Chucks, Double Open End Wrench

AModel No. New AK3038

3/8”Drive

Section 16 Tap & Die Sets604

B

E


High quality steel taps and dies. Split dies withmachined lead-ins for ease of use. Die holder featuresself-centring mechanism for straight and accuratethread cutting. Set includes taper and plug taps. Setalso includes T-handled tap wrench and Metric screwpitch gauge.

Contents: Taper & Plug Taps and Dies; 3 x 0.5,3.5 x 0.6, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.50,12 x 1.75mm, Tap Wrench, T-Bar Tap Wrench, Die Holder, Thread Gauge

AModel No. AK3028

A


High quality steel taps and dies. Split dies withmachined lead-ins for ease of use. Die holder features self-centring mechanism for straight and accuratethread cutting. Set also includes T-handled tap wrenchand Metric screw pitch gauge.

Contents: Taper Taps and Dies; 3 x 0.5, 3 x 0.6, 4 x 0.7, 4 x 0.75, 5 x 0.8, 5 x 0.9, 6 x 0.75, 6 x 1.0, 7 x 0.75, 7 x 1.0, 8 x 1.0, 8 x 1.25, 10 x 1.25, 10 x 1.5,12 x 1.5, 12 x 1.75mm, 1/8”NPT, Tap Wrench, T-Bar Tap Wrench, Die Holder, Screwdriver, Thread Gauge

CModel No. AK3040

C

Professional Tap & Die Set 45pcSplit Dies Metric

Precision machined, Tungsten steel taps and dies. Dies are split to facilitate thefine adjustment of core diameter. Set includes Metric coarse and fine sizes. Alsoincludes sliding jaw type tap wrench and T-Bar type tap wrench together with steeldie holder with knurled screws. Supplied in heavy-duty storage case.

Contents: Taper Taps and Dies; 6 x 1.0, 6 x 0.75, 8 x 1.25, 8 x 1.0, 10 x 1.25, 10 x 1.5, 12 x 1.5, 12 x 1.75, 14 x 1.5, 14 x 2.0, 16 x 1.5, 16 x 2.0, 18 x 1.5,18 x 2.5, 20 x 1.5, 20 x 2.5, 22 x 1.5, 22 x 2.5, 24 x 1.5, 24 x 3.0mm, Tap Wrench,Die Holder, Spacer, Screwdriver

DModel No. AK303

D

Tap & Die Set 33pc Split Dies Metric/UNF/BSP

High quality steel taps and dies. Split dies withmachined lead-ins for ease of use. Die holder features self-centring mechanism for straight and accuratethread cutting. Set includes T-handled tap wrench,Metric screw pitch gauge and slotted 5mm screwdriver.

Contents: Taper Taps and Dies; 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1, 8 x 1.25, 10 x 1.5, 12 x 1.75mm,UNF - 1/4”-28, 5/16”-24, 3/8”-24, 7/16”-20, 1/2”-20, BSP - 1/8”-28, 1/4”-19, Tap W rench, T-Bar Tap Wrench, Die Holder, Thread Gauge, Screwdriver

BModel No. AK3033

Tap & Die Set 76pc Split Dies Metric

High quality steel taps and dies. Split dies with machined lead-ins for ease of use.Die holder features self-centring mechanism for straight and accurate threadcutting. Set includes taper and plug taps. Set also includes T-handled tap wrench,Metric screw pitch gauge, slotted 5mm screwdriver and a range of HSS drill bits.

Contents: Taper & Plug Taps and Dies; Coarse - 3 x 0.5, 3.5 x 0.6, 4 x 0.7,4.5 x 0.75, 5 x 0.8, 6 x 1, 8 x 1.25, 10 x 1.5, 12 x 1.75mm. Fine - 2 x 0.25, 3 x 0.35, 4 x 0.5, 5 x 0.5, 6 x 0.75, 8 x 1, 10 x 1.25mm, 12 x 1.25mm, Taper & Plug Tap & Die; 1/8”BSP, HSS Drill Bits; 1.7, 2.5, 2.6, 2.9, 3.3, 3.5, 3.8, 4.2, 4.5, 5, 5.3, 6.8,7, 8.5, 8.8, 10.3, 10.7mm, Tap Wrench, T-Bar Tap Wrench, Die Holder , Thread Gauge, Screwdriver

EModel No. AK3076

SplitDies

SplitDies

SplitDies

SplitDies

28pc

45pcSplitDies

76pc

33pc 40pc

Section 16 Tap & Die Sets 605

Tap Set 10pc Metric

Taps manufactured from high quality tungsten steelhardened and tempered for long life.Contents: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 7 x 1.0,8 x 1.25, 9 x 1.25, 10 x 1.5, 12 x 1.75mm, 1/8”-28BSP

Model No. AK304M

A

A B

Tap Wrench

Professional steel tap wrench with sliding jaws.Suitable for tap sizes between M3 and M12.

Length: 200mm

CModel No. AK727

C

Die Holder

Suitable for solid and split dies.Die Ø: 21mmLength: 170mm

DModel No. AK9802

D

Adjustable Thread Restorer

Twin HSS blades for quick and easy restoration ofdamaged threads. Covers all Metric threads from M4to M45 with a simple knurled adjuster.

Cutting Range: M4-M45

BModel No. AK314

T-Handle Tap Wrench Set 3pc

General purpose wrenches for tapping and reaming.Solid jaw design and heavy knurled cap. Supplied inpouch.

Contents: Ø1.5-4.0mm, Ø4.0-6.5mm, Ø6.5-13mm

EModel No. AK9799

E

Deburring Tool

Composite grip with interchangeable swivel cuttingbits. Spare cutter stored in handle. Suitable fordeburring pipes and sheet materials.

Length: 150mm

GModel No. DB01

G

Junior Hacksaw withAdjustable Blade

Rigid die-cast aluminium frame with comfortablecomposite handle. Multi-position blade clamp permitsblade to be mounted in any one of six positions.Supplied with 150mm general purpose blade.

JModel No. AK8680

J

C

F

Re-Threading Kit 42pc Metric

Taps and dies are suitable for chasing out damagedthreads and the removal of nicks and burrs withoutundercutting good threads. Thread file restoresdamaged external threads on any diameter, right or lefthand. Supplied in case.

Contents:Taps: Metric; 6 x 1.0, 8 x 1.25, 10 x 1.5, 12x 1.25, 12 x 1.5, 12 x 1.75mm. National Fine; 1/4” x28, 5/16” x 24, 3/8” x 24, 7/16” x 20, 1/2” x 20, 9/16” x 18tpi. National Coarse; 1/4” x 20, 5/16” x 18, 3/8” x 16, 7/16” x 14, 1/2” x 13, 9/16” x 12tpiDies: Metric; 6 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.25, 12x 1.5, 12 x 1.75mm National Fine; 1/4” x 28, 5/16” x24, 3/8” x 24, 7/16” x 20, 1/2” x 20, 9/16” x 18, 5/8” x 18tpi, National Coarse; 1/4” x 20, 5/16” x 18, 3/8” x 16, 7/16” x 14, 1/2” x 13, 9/16” x 12, 5/8” x 1 1tpiThread Restorer File: National;11, 12, 13, 14, 16, 18, 20, 24 and 9, 10, 12, 16, 20, 27, 28, 32tpi

IModel No. AK311

I

Thread Restoring File Set 3pc

Suitable for the restoration of external threads. 220mmDouble-ended files each supplied with reversible vinylgrip. Packed in storage pouch.

Contents:Imperial: File #1; 11, 12, 13, 14, 16, 18, 20,24tpi, File #2; 9, 10, 12, 16, 20, 27, 28, 32tpiMetric: File #1; 0.75, 1.0, 1.25, 1.5, 1.75, 2.0, 3.0mm Pitch

HModel No. AK313

H

Re-Threading Kit 15pc Metric

Taps and dies are suitable for chasing out damagedthreads and the removal of nicks and burrs withoutundercutting good threads. Use with a standardwrench and a little light oil. Thread file restoresdamaged external threads on any diameter, right or lefthand - just select correct pitch. Ideal for restorationwork. Supplied in tool tray.Contents: Taps and Dies: Metric; 6-1.00, 8-1.25,10-1.25, 10-1.5, 12-1.25, 12-1.5, 12-1.75mm, ThreadRestorer File: 0.75, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 3.0mm Pitch

FModel No. AK310

Section 16 Thread Cutting Tools606

Square Type ScrewExtractor Sets 5 & 7pc

Manufactured from heat treated Chrome Molybdenumsteel. Supplied in storage tray.

Model No: Contents:AK719 1/8”, 3/16”, 15/64”, 5/16”, 3/8”AK720 1/8”, 3/16”, 15/64”, 5/16”, 3/8”, 15/32”, 9/16”

Model No. SEE BELOW

Helix Type Screw Extractor Set5pc

Manufactured from heat treated Chrome Molybdenumsteel. Rapid acting helix aids screw removal. Suppliedin carry-case.Contents: 1/8”-1/4”, 1/4”-5/16”, 5/16”-7/16”, 7/16”-9/16”,9/16”-3/4”

BModel No. AK722

B

Bolt Extractor Set 3/8”Sq Drive10pc - Metric

Drop-forged Chrome Molybdenum steel sockets.Reverse spiral flutes are designed to bite down toprovide maximum gripping power. Set supplied with8mm straight rod to knock bolt out after use.Contents: Sockets; 10, 11, 12, 13, 14, 15, 16 (5/8”), 17, 19mm (3/4”), 74mm Straight Rod

EModel No. AK728

E

A

H

C D-

C D-

CD

Nut Splitter Set 2pc

Chrome Molybdenum steel blades with forged highcarbon steel body. Hardened, tempered and chromeplated for rust resistance.Capacity: 12-16mm, 16-22mm

GModel No. AK84

G

Nut Splitter 4pc

Chrome Molybdenum steel blades with forged highcarbon steel grips. Hardened, tempered and chromeplated for rust resistance.

Capacity: 9-12mm, 12-16mm, 16-22mm, 22-27mm

JModel No. AK85

J

Stud Extractor Set 1/2”Sq Drive4pc - Metric

Socket type extractors manufactured from ChromeVanadium steel heat treated and chrome plated forcorrosion resistance. Suitable for use with 1/2”Sq driveratchet or wrench. Supplied in steel case.

Contents: 6, 8, 10, 12mm

HModel No. AK723

IMPORTANT SAFETY WARNING!

Always wear eye or face protectionwhen using these tools! For a full rangeof goggles, visors, gloves and eardefenders, plus other safety equipment,see pages 707 to 717 of this catalogue.

MMMM

MMMM

HSS Screw & Drill Bit ExtractorSet 5pc

HSS screw and drill bit removers. Five sizes rangefrom #0 to #4. Suitable for extracting screw and drillbits, ranging from 6-14mm. Supplied in storagecase.

Contents: #0, #1, #2, #3, #4

IModel No. New AK7228

I

Impact Driver Set withProtection Grip 15pc

Heavy-duty 1/2”Sq drive impact driver with compositegrip and integral knuckle guard. Supplied with 13pcChrome Vanadium steel driver bit set and 1/2”Sq driveadaptor. Supplied in carry-case.

Contents: 1/2”Sq Drive Impact Driver, Hex Bits; 4, 5, 6, 8mm, Slotted Bits; 5, 6, 8, 10, 12mm, Phillips Bits; #1, #2, #3, #4, Adaptor; 1/2”Sq Drive x 8mm Hex

FModel No. AK2081

F

See page 65 for our full range of Impact Drivers.

Helix Type Screw Extractor Setwith Tap Wrench 6pc

Manufactured from heat treated Chrome Molybdenumsteel. Rapid acting helix aids screw removal. Includestap wrench. Extractors supplied in carry-case.Contents: 1/8”-1/4”, 1/4”-5/16”, 5/16”-7/16”, 7/16”-9/16”,9/16”-3/4”, Tap Wrench

AModel No: AK721

Section 16 Extractors & Nut Splitters 607

E

A

D

Punch & Chisel Set 16pc

Manufactured from Chrome Vanadium steel, hardenedand tempered for extra durability. Supplied with chiselsharpening gauge.Contents: Taper Punches; 2 x 135, 3 x 145, 4 x 150, 5 x 160, 6 x 170mm, Pin Punches; 2 x 110, 3 x 120, 4 x 125, 5 x 135, 6 x 145mm, Centre Punches;3 x 125, 5 x 150mm, Cold Chisels; 10 x 140, 13 x 150, 16 x 165mm, Chisel Gauge

DModel No. AK9216

J

Letter & Number Punch Set36pc

60mm Long, high carbon steel punches. Hardened,tempered and chemically blackened. Full set of 4mmalpha-numeric characters (number 6 doubles asnumber 9). Supplied in composite case.

JModel No. AK9296

Number Punch Set 9pc

Hardened, tempered and chemically blackened. Set of9 numeric punches (number 6 doubles as 9). 4mmCharacter height. Supplied in composite case.

HModel No. AK9294

H

Letter Punch Set 27pc

Hardened, tempered and chemically blackened. Set of27 alphabetic punches. 4mm Character height.Supplied in composite case.

IModel No. AK9295

I

Punch & Chisel Set 25pc

Comprehensive set made from high quality Chrome V anadium steel. Hardened, tempered with chemicallyblackened finish. Supplied in tool roll.Contents: Pin Punches; 3/32”, 1/8” (125mm), 5/32”, 3/16”, 7/32”, 1/4” (150mm), Centre Punches;32, 34mm (125mm), 35mm (150mm), Taper Punches; 3/32”, 1/8”, 3/16”, 7/32”, 1/4” (150mm), 1/8”, 3/16”, 1/4”(250mm), Chisels; 3/8”, 1/2” (150mm), 5/8”, 3/4” (175mm), 7/8”, 1” (200mm), 7/8” (310mm), Utility Chisel (150mm)

AModel No. AK9298

Combination Punch Set 14pc

Five 205mm, parallel pin, steel punches with knurledgrips. Eight 90mm, parallel pin, brass punches withhex shanks plus 122mm automatic centre punch.Supplied in storage pouch.Contents: 205mm Parallel Steel Punches; 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 90mm Parallel Brass Punches; 1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, Automatic Centre Punch; 122mm

EModel No. AK9145

GF

Parallel Pin Punch Set 6pc

Chrome Vanadium steel punches with knurled stockfor added grip. Overall length 150mm, pin length50mm. Supplied in pouch.Length: 150mmPin Length: 50mmContents: 3, 4, 5, 6, 7, 8mm

FModel No. AK9123

Long Pattern Parallel Pin PunchSet 5pc

Chrome Vanadium steel stock hardened and heat treated.Chemically blackened for corrosion resistance. Overalllength 200mm, pin length 95mm. Supplied in pouch.Length: 200mmPin Length: 95mmContents: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”

GModel No. AK9124

B

Interchangeable Punch & ChiselSet 13pc

Interchangeable punches and chisels, manufacturedfrom 10mm hex stock. Hammer-through grip withdouble sprung-ball tool retention and hand guard.Phosphate finish for corrosion resistance. Supplied instorage case.

Contents: Punches; Pin - 3, 6mm, Centre - 3, 6mm, Solid - 3, 5mm, Chisels; Cold - 10, 13, 16, 20mm, Cape - 6mm, Spade - 10mm, Hammer-Through Grip with Hand Guard

BModel No. AK9213

Interchangeable Punch & ChiselSet 10pc

Heavy-duty hammer-through grip with knuckle guard.Features set of nine quick-release 16mm hex stockChrome Vanadium steel punch and chisels. Suppliedin a storage case.

Contents: Parallel Punch; 6, 8, 10, 12mm, Flat Chisel; 22, 30, 50mm, Utility Chisel; 9mm, Scaling Chisel; 50mm

CModel No. New AK9120

C

Section 16 Punches & Chisels608

Section 17Construction & Craft610 Multimeters612 Mains Testers613 Socket Testers614 Electrician's Screwdrivers615 VDE Pliers616 Wire Strippers & Shears617 Cable Ties & Crimping Terminals618 Wire Stripping & Crimping Tools620 Pipe Tools & Drainage623 Plumbing Wrenches & Pressure Tester624 Soldering Tools & Heating Torches627 Hole Saws, Hand Saws & Laser Level628 Tiling Tools630 Cutting Tools631 Staplers, Nailers & Tackers632 Woodscrews633 Measuring Tapes

MULTIMETERSPECIFICATION

200V, 500V (±1.2%)

0-2V (±0.5%), 20V, 200V,

500V (±0.8%)

0-200mA (±2.0%)

0-2kΩ, 20kΩ, 200kΩ, 2MΩ

(±1%)

X

X

X

X

X

X

4 x 11mm

1 x 12V

Vinyl case.

120 x 70 x 20mm

80g

IEC 1010

X

AC Voltage (Accuracy)

DC Voltage (Accuracy)

AC Current (Accuracy)

DC Current (Accuracy)

Resistance (Accuracy)

Capacitance (Accuracy)

Temperature (Accuracy)

Frequency (Accuracy)

Continuity Buzzer

Diode Test

Transistor Test

Hi-Impact Rubber Case

Digits x Height

Low Battery Indicator

Batteries (Included)

Information

Size L x W x D

Conformity

Weight

0-3.26V, 32.6V,326V, 750V (all ±0.8%)

(Auto-ranging)

0-326mV (±0.5%),3.26V (±0.3%),32.6V (±0.3%),326V (±0.3%),1000V (±0.5%)(Auto-ranging)

0-326µA, 3260µA,32.6mA, 326mA

(all ±1.2%), 10A (±2%)

(Auto-ranging for µA and mA)

0-326µA, 3260µA,32.6mA, 326mA

(all ±1.5%), 10A (±3%)

(Auto-rangingfor µA and mA)

0-326nF, 32.6µF (±3%)

X

0-326Ω, 3.26kΩ,32.6kΩ, 326kΩ,

3.26MΩ(all ±0.8%),

32.6MΩ (±1.2%) (Auto-ranging)

0-32.6kHz (±1.2%),200kHz (±2.5%)(Auto-ranging)

3.75 x 20mm

Auto-ranging. Data hold.

Integral stand.

200 x 95 x 47mm

440g

0-200mV (±1.2%), 2V, 20V, 200V

(all ±0.8%), 750V (±1.2%)

0-200mV, 2V, 20V,200V, 1000V (all ±0.5%)

0-20µA (±3%), 200µA, 2mA,

20mA (all ±1%),200mA,

2A (all ±1.8%), 20A (±3%)

0-20µA (±2%), 200µA, 2mA,

20mA (all ±0.8%),200mA, 2A (all ±1.2%), 20A (±2%)

X

X

X

X

0-200Ω, 2kΩ, 20kΩ, 200kΩ,

2MΩ (all ±0.5%),20MΩ (±1%)

3.5 x 22mm

-

170 x 88 x 32mm

220g

1-750V (±1%)

1-1000V (±0.5%)

0.1-200, 1-1000A(<800A ±2%, >800A ±2%)

X

X

X

X

X

X

X

0.1-200Ω, 10-20kΩ (±1%)

3.5 x 12mm

Soft, padded carry-case.

235 x 70 x 45mm

300g

X

X

0-200A (±3.0%)

0-200A (±2.8%)

X

X

40-51, 51-510Hz, 051-1KHz (all ±1.2%)

X

X

X

X

3.67 x 11mm

2 x 1.5V

Soft, padded carry-case.

155 x 66 x 31mm

160g

X

0-200mV (±1.2%), 2V, 20V,200V (all ±0.8%),

700V (±1.2%)

0-200mV, 2V, 20V, 200V (all ±0.5%),

1000V (±0.8%)

0-2mA, 20mA (all ±0.8%),

200mA (±1.5%),10A (both ±2%)

0-200Ω, 2kΩ, 20kΩ, 200kΩ,

2MΩ (all ±0.8%),20MΩ (±1%), 200MΩ (±5%)

0-2nF, 20nF, 200nF, 2µF,

20µF (all ±4%)

-20 to 1000°C (-20 to 0°C ±5%, 0 to 400°C ±1%,400 to 1000°C

±2%)

X

3.5 x 25mm

K-type Thermocouple.Auto power-off.

Integral stand andprobe storage.

190 x 90 x 32mm

420g

0-20mA (±1%),200mA (±1.8%),

10A (±3%)

200V, 750V (±1.2%)

0-200mV (±0.25%),2V, 20V,

200V (±0.5%)

X

0-200µA, 2000µA,

20mA (±1%), 200mA (±1.2%),

10A (±2%)

200V, 600V (±1.2%)

0-200mV, 2V, 20V, 200V

(±0.5%), 600V (±0.8%)

0-2mA, 20mA (±1%),

200mA (±1.5%), 10A (±3%)

0-200Ω, 2kΩ, 20kΩ,

200kΩ (±0.8%),2MΩ (±1%)

X

-20°C to 0°C (±10%), 0°C to 400°C (±1%),

400°C to 1000°C (±2%)

X

3.5 x 15mm

1 x 9V 1 x 9V 1 x 9V 1 x 9V 1 x 9V

K-type Thermocouple.

Data hold facility.Integral stand.

145 x 75 x 40mm

240g

IEC 1010 IEC 1010 IEC 1010 IEC 1010 IEC 1010 IEC 1010

X

0-200Ω, 2kΩ, 20kΩ, 200kΩ

(±0.8%), 2MΩ (±1%)

X

X

X

X

3.5 x 25mm

1 x 9V

-

-

125 x 70x 23mm

120g

MM12 MM19 MM20 MM302 MM402MM30 MM404 MM405

Section 17 Multimeters610

30 Function Heavy-DutyMultimeter with Thermocouple

Professional tradesman’s multimeter with 25mm LCDdisplay. Durable case with protective boot, probestorage and integral two-position stand. Featuresheavy-duty circuitry with auto over-range display, autozero, auto power-off, audible continuity warning andpolarity protection on all necessary ranges. Suppliedwith probe test leads and temperature probe.

Measures: AC and DC Voltage Temperature AC and DC Current Diode Test Resistance Audible Continuity Capacitance Transistor Test

19 Function Digital Multimeter

High quality general purpose multimeter with a large(25mm), clear and easy-to-read LCD display .Supplied with full set of leads and probes.

Measures: AC and DC Voltage DC Current Resistance Diode/Transistor Verification Mode

BModel No. MM19

B

20 Function Digital Multimeterwith Thermocouple

Heavy-duty general purpose multimeter with clear andeasy-to-read LCD display. Features data hold function,temperature probe and diode test facility . Housed inrugged rubber boot with integral stand. Supplied withfull set of leads and probes.Measures: AC and DC Voltage DC Current Resistance Diode/Transistor Verification Mode Temperature Audible Continuity

CModel No. MM20

C

12 Function Multimeter

General purpose multimeter with three digit LCDdisplay. Polarity reversal and low battery indicationalso displayed. Compact design with wrap-around leadstorage feature. Audible test feature. Supplied withleads, probes and carry pouch.

Measures: AC and DC Voltage DC Current Resistance Audible Continuity/Diode Test

AModel No. MM12

A

EModel No. MM302

E

Auto Ranging Heavy-DutyMultimeter

Auto-ranging multimeter with hi-contrast LCD display,20mm high digital read-out. Durable case withprotective boot, probe storage and integral two-position stand. Suitable for the toughest workshopconditions. Includes data hold and audible continuitytest. Supplied with capped probe test leads.Measures: AC and DC Voltage Capacitance AC and DC Current Frequency Resistance Duty CycleTests: Diodes Transistors Audible Continuity

F Model No. MM402

F

30 Function Multimeter

Quality tradesman’ s multimeter with 18mm high easy-to-read LCD display. Features auto over-rangedisplay, auto zero and audible continuity warning.Supplied with full set of leads and probes.Measures: AC and DC Voltage AC and DC Current Resistance Diode/Transistor Verification Mode Audible Continuity

DModel No. MM30

D

G

Mini AC/DC Clamp Meter

Durable composite housing with rubber grip aroundhandle for comfort and control. Designed to verify thepresence of AC and DC current and with non-contactvoltage detection, flashlight and non-contactfrequency measurement. Perfect for the automotiveelectrician. Features a backlit LCD display and anLED light at the front of the unit for working in darkareas. Supplied with carry-case.Measures: AC and DC Current Frequency

Model No. MM405

H

Digital Clamp Multimeter

Durable composite case with integral AC current testclamp, suitable for the toughest workshop conditions.Four digit, large and clear , 12mm LCD display .Features push-button data hold and four function, sixrange, rotary selection switch. Supplied with probe testleads, wrist strap and carry-case.Measures: AC and DC Voltage AC Current Resistance Audible Continuity

HModel No. MM404

K-TYPE THERMOCOUPLESModels MM20 and MM302are supplied with thermocoupleattachment allowing accuratetemperature readings to betaken. Temperature readingscan be displayed in either °Cor °F.

Section 17 Multimeters 611

G

Section 17 Mains Testers612

A B C

Voltage Tester

Professional two pole voltage tester . Suitable forchecking AC mains and DC power supplies between 6-400Volt. Can also be used for checking voltage andpolarity on car batteries and continuity testing of DCcircuits. Features two insulated test probes, one with asix stage LED display and 600mm heavy-duty cable.

Operating Range: 6-400VOperating Temperature Range: -10°C to +50°CMaximum Test Duration: 30 seconds

GModel No. AK2002

G

F

Non-Contact Voltage Detector

Voltage detector with on/off switch and three sensitivitysettings. Multi-directional flashing red LED and buzzerindicate AC voltages between 100-600V olts. Quick,accurate detection of cable breaks in open-endedcables, e.g. cable drums. Ideal for microwaveapplications and checking socket connections. Fittedwith pocket clip and supplied with 2 x LR44 cells.

Display: Red LEDVoltage Range: 100-600VFrequency Range: 50-400HzOver Voltage Category: CATIII/600VOperating Temperature: -10°C to +55°C at RH <80%Dimensions: 18 x 150mm

EModel No. AK1997

E

Euro Voltage Tester 180mm

Euro style mains voltage tester with screwdriver bladeand pocket clip. Presence of voltage shown by neonindicator. Fully insulated with one-piece moulded handleincorporating anti-slip guard for complete protection.

Testing Range: 125-250VLength: 180mm

DModel No. AK1995

D

Socket Box Template

Quick and accurate positioning of single and doublesockets on drylined walls. Easy-to-use, indispensabletool, featuring adjustable depth gauge to ensure boxesare placed at a uniform height and built-in spirit level forcorrect alignment.

HModel No. ESBT2

Socket Thread Restorers

Restores damaged threads in electrical socketterminals. Fitted with contoured handle for positive gripand ease of use.Model No: Thread:AK6126 M3.5 x 0.6mmAK6127 M4 x 0.7mm


I

M4

M3.5

Non-Contact Voltage Detector

Contact free voltage detector with on/of f switch and multi-directional flashing beacon. Optical and acousticindication of AC voltages between 50-600Volts. Quick,accurate detection of cable breaks in open-endedcables, e.g. cable drums. Ideal for microwaveapplications and phase detection in sockets. Suppliedwith 2 x LR03 1.5Volt cells.

Display: Red LEDVoltage Range: 50-600VFrequency Range: 50-500HzOver Voltage Category: CATIII/600VOperating Temperature: -10°C to +55°C at RH <80%Dimensions: 25 x 21 x 140mm

FModel No. AK1998

H

Mains Tester 190mm

Mains voltage tester with screwdriver blade. Fullyinsulated with moulded transparent plastic handle andblade sheath.


BModel No. AK1991

Euro Voltage Tester 140mm

Euro style mains voltage tester with screwdriver bladeand pocket clip. Presence of voltage shown by neonindicator. Fully insulated with one-piece moulded handleincorporating anti-slip guard for complete protection.


CModel No. AK1994

Mains Tester 140mm

Mains voltage tester with screwdriver blade and pocketclip. Fully insulated with moulded transparent plastichandle and blade sheath.


AModel No. AK1990

I

F

F

A

H

16A Socket Tester 230V

Tester for use with 16Amp 230V olt sockets. Highdefinition colour LEDs and clear audible output toindicate error-free socket wiring status, plus 17 faultconditions including L-E reversal, L-N reversal, faulty Nor E and missing L.

DModel No. EST16230

D

B

G

16A Socket Tester 110V

Tester for use with 16Amp 1 10Volt sockets. Highdefinition colour LEDs and clear audible output toindicate clearly correct/incorrect conditions. Alsoindicates positions of L1, L2 and Centre Tap.

EModel No. EST16110

E

3-in-1 Metal, Voltage & StudDetector

Combined unit to accurately detect live or deadelectricity cables, water or gas pipes and woodenstuds or battens with ease. Powered by a 9V olt cell(not included) the detector will, with a red and greenLED display and an audible signal, show the presenceof metal, electricity and wooden studs or battens.Supplied with full instructions.

FModel No. AK2018

13A Socket Tester 230V14 Function

High definition green LEDs indicate error-free socketwiring status, plus 13 fault conditions including L-Ereversal, L-N reversal, faulty N or E and missing L. Tough,smooth contoured construction. Tests BS1363 sockets.

Wiring Condition:Correct L-E Reverse L-N-E Miswire L-N Reverse L-N-E Miswire Faulty N / L-E Miswire Faulty N / E Miswire Faulty N Faulty N / L-E Reverse Faulty E / L-N Reverse Faulty E Faulty E / N Miswire Faulty E / L-N Miswire Faulty L / N-E Miswire Faulty L / E Miswire Faulty L / N-E Miswire Faulty L / N Miswire No Mains

AModel No. EST12

CHECKELEC

CHECKELEC

CHECKELEC

CHECKELEC

CHECKELEC

CHECKELEC

CHECKELEC

CHECKELEC

AudibleAudible

230V 110V

230V 110V

Self-TestSelf-Test

13A Socket Tester 230V18 Function - Audible

High definition tri-colour LEDs and clear audible outputindicate error free socket wiring status, plus 17 faultconditions including L-E reversal, L-N reversal, faulty Nor E and missing L. Built-in self-test feature. Tough,smooth contoured construction. Tests BS1363 sockets.

Wiring Condition:Correct L-E Reverse L-N-E Miswire L-N Reverse L-N-E Miswire Faulty N / L-E Miswire Faulty N / E Miswire Faulty N Faulty N / L-E Reverse Faulty E / L-N Reverse Faulty E Faulty E / N Miswire Faulty E / L-N Miswire Faulty L / N-E Miswire Faulty L / E Miswire Faulty L / N-E Miswire Faulty L / N Miswire No Mains

BModel No. EST32

16 to 32A Socket Tester Adaptor 230V

Allows single tester to be used with 16Amp and 32Amp230Volt sockets. Use in conjunction with EST16230.Configuration: 16A Socket - 32A Plug

GModel No. EST16230A

16 to 32A Socket Tester Adaptor110V

Allows single tester to be used with 16Amp and 32Amp110Volt sockets. Use in conjunction with EST161 10.Configuration: 16A Socket - 32A Plug

HModel No. EST16110A

Moisture Meter with LEDDisplay

Designed to indicate the moisture content of timber inthe range 8 to 22%. Colour coded ranges for readingstaken on plaster or brick.

IModel No. AK2020

13A Socket Opener

Tough, polycarbonate constructed 13Amp socket gateopener. The safe way for the qualified electrician toopen the shutter and check for presence of voltage.

CModel No. ESO13

C

Section 17 Socket Testers 613

Individual ScrewdriversVDE/TUV/GS Approved

Chrome Molybdenum shafts with magnetic tip andcorrosion resistant precision blade. Fully insulated toVDE/TUV/GS and EN60900 standards to protect fromelectric shocks up to 1000V olt. Specially designedimpact resistant handle with non-slip grip for comfort,maximum torque transfer and roll resistance.

Model No: Type: Size:AK6122/2 Slotted 3.0 x 100mmAK6122/3 Slotted 3.5 x 100mmAK6122/4 Slotted 4.0 x 100mmAK6122/5 Slotted 5.5 x 125mmAK6122/6 Slotted 6.5 x 150mmAK6122/7 Slotted 8.0 x 175mmAK6122/8 Phillips #0 x 75mmAK6122/9 Phillips #1 x 100mmAK6122/10 Phillips #2 x 100mmAK6122/11 Phillips #3 x 150mmAK6122/12 Pozi #0 x 75mmAK6122/13 Pozi #1 x 100mmAK6122/14 Pozi #2 x 100mmAK6122/15 Pozi #3 x 150mm

D

BC

B O-Model No. SEE BELOW

Microtip Screwdriver Set 7pcVDE/TUV/GS Approved

Set comprises five slotted and two Phillips driversmanufactured from 8660 steel with precision tips.Insulated and VDE/TUV/GS approved for use up to1000V. Spinner top enables finger-tip control of driver.

Contents: Phillips; #00 x 75, #0 x 75mm, Slotted; 1.5 x 40, 1.8 x 60, 2.0 x 60, 2.5 x 75, 3.0 x 75mm

AModel No. AK6120

A

B C D E

F G H I J

K L M N O

Screwdriver Set 6pc VDE/TUV/GS Approved

Chrome Molybdenum shafts with magnetic tip andcorrosion resistant precision blade. Fully insulated toVDE/TUV/GS and EN60900 standards to protect fromelectric shocks up to 1000V olt. Specially designedimpact resistant handle with non-slip grip for comfort,maximum torque transfer and roll resistance.Contents: Slotted; 3 x 100, 5.5 x 125, 6 x 150mm, Phillips; #0 x 75, #1 x 100, #2 x 100mm

PModel No. AK6122

PEFG

I

L

H

M

JK

ON

Screwdriver Set 12pc

Set of popular sized screwdrivers. High quality hexagonChrome Vanadium driver shafts with satin finish. Contoured,textured handles for added control. Shot blasted andblackened tips. Supplied in carry-case.Contents: Slotted; 6 x 38, 5 x 75, 5 x 100, 6 x 100, 8 x 150, 10 x 200mm, Phillips; #3 x 150, #4 x 200mm, Pozi; #2 x 38, #1 x 75, #1 x 100, #2 x 100mm

QModel No. AK4908

Q

PREMIER SCREWDRIVERS

See pages 52 to 63 forour full range of

Premier Screwdrivers.

GripMAX® Screwdriver Set11pc

Extra strong Chrome Molybdenum shafts with satinfinish. Shot blasted and magnetized tips. Hexagonalprofile design with ribbed grips for maximum powertransfer from hand to fixing. Impact resistant handleswith hanging hole.

Contents: Slotted; 3 x 75, 4 x 100 (Insulated), 5.5 x125, 6.5 x 150, 8 x 150mm, Phillips; #1 x 80, #1 x 100 (Insulated), #2 x 100mm, Pozi; #1 x 80, #2 x 100mm,Telescopic Magnetic Pick-Up Tool 110-480mm

RModel No. AK4303

R

All Premier Hand Toolsare Guaranteed forlife except wherestated.

PowerMAX® Screwdriver Setwith Carry-Case 21pc

High quality Chrome Vanadium satin finished shaftswith shot blasted and magnetized tips. Texturedhandles with round profile design of fer maximumpower transfer from hand to fixing. Features colourcoding for fast identification and hanging hole foralternative storage. Deep knurling on shafts allow extragrip for oily fingers when spinning off fixings.Contents: Slotted; 6 x 150, 8 x 150mm, Phillips; #1 x 75, #2 x 100mm, Pozi: #1 x 75, #2 x 100mm, Bit Holder , Bits; Hex - 2, 2.5, 3, 4, 5, 5.5, 6mm, Slotted - 4, 5mm, Pozi - #3; Phillips - #3, TRX-Star* - T15, T20, T25

SModel No. New AK5043

S

Section 17 ElectricianÊs Screwdrivers614

Section 17 VDE Pliers 615

Screwdriver & Pliers Set 10pc VDE Approved

Long Nose PliersVDE Approved

Model No: Length: Cutting Capacity:AK83512 160mm Ø1.6mmAK83532 200mm Ø1.8mm


Combination Pliers VDE Approved

Model No: Length: Cutting Capacity:AK83422 160mm Ø1.6mmAK83432 180mm Ø2.0mmAK83442 200mm Ø2.3mm


B

Snipe Nose PliersVDE Approved

Model No: Length: Cutting Capacity:AK83562 160mm Ø1.6mmAK83572 200mm Ø1.8mm


C D

E

Professional PliersVDE Approved

Manufactured to the very highest standards of qualityand safety. Fully certified to EN60900 IEC 900 standard. At a temperature of -20ºC the handles must

withstand impact and shock loads. After 24 hours immersion in water, the pliers must

still provide protection against discharges and spark-over at up to 10,000V AC.

After 2 hours at +70ºC, the pliers must not conductdischarge at a test of 5,000V AC even with a pointload of 20N applied.

After 168 hours (1 week) at +70ºC, the handlesmust still be firmly secured to the pliers and beable to withstand a 500N pull-off test.

The handles must be manufactured from nearinflammable materials. This is tested using a gasflame.

All pliers are manufactured from high grade toolsteel and are hardened using a special highfrequency induction process. Cutting capacitiesquoted according to DIN/ISO5744.

Model No. SEE BELOWA

Pliers Set 3pc VDE Approved

VDE Approved pliers with induction hardened cuttingedges in a polished finish. Features soft grip handlesfor comfort and control. Cutting capacities accordingto DIN 5236/ISO 5748 and DIN5238/ISO 5749. Combination pliers meet DIN 5244/ISO 5746 standards.Contents: Length: Cutting Capacity:Side Cutters: 160mm Ø2.0mmCombination Pliers: 180mm Ø2.0mmLong Nose Pliers: 200mm Ø1.8mm

GModel No. AK83452

G

Heavy-Duty Side Cutter 180mmVDE Approved

VDE Approved side cutter with induction-hardened cutting edges in a polished finish. Features soft grip handles for comfort and control. Cutting capacityquoted according to DIN 5238/ISO 5749.Length: 180mmCutting Capacity: Ø2.3mm

FModel No. AK83472

F

VDE Approved pliers with induction hardened cuttingedges in a polished finish. Features soft grip handles for comfort and control. Cutting capacities according to DIN 5236/ISO 5748 and DIN5238/ISO5749. Combination pliers meet DIN 5244/ISO 5746standards. Screwdrivers have Chrome Molybdenumshafts with magnetic tips. Fully insulated to VDE/GSand EN60900 standards to protect from electric shocksup to 1000V . Specially designed impact resistant

handle with non-slip grip for comfort, maximum torquetransfer and roll resistance. Set also contains a mainsvoltage tester.

Contents: 180mm Combination Pliers, 160mm SideCutters, Screwdrivers; Slotted - 2.5 x 80, 3.5 x100, 4.0 x 100, 5.5 x 125mm, Pozi - #0 x 75, #1 x 100, #2 x 100mm, Voltage Tester

H

HModel No. AK83602

A F-

Wire Stripping Pliers 160mmVDE Approved

VDE Approved wire and cable stripper with screw adjustment. Suitable for wire and cables up toØ5.0mm. Meets DIN/ISO 5743/4, 8979 standards.

Length: 160mmCapacity: Ø5.0mm

DModel No. AK83552

Side Cutter 160mm VDE Approved

VDE Approved side cutter with induction-hardened cutting edges in a polished finish. Features soft grip handles for comfort and control. Cutting capacity quoted according to DIN 5238/ISO 5749. Length: 160mmCutting Capacity: Ø2.0mm

EModel No. AK83462

Automatic Wire Stripping Tool

One handed, compound action, grips and strips electriccables from 1.0-3.2mm² automatically . Jaw actionprevents crushing or cutting even the finest wires.Supplied with length gauge and fitted with vinyl grips.Stripping Sizes: 1.0, 1.6, 2.0, 2.6, 3.2mm²Length: 175mm

EModel No. AK2252

E

Automatic Wire Stripping Tool

Plate steel construction, chemically blackened withoversize vinyl grips. 5-in-1 Wire stripper suitable for wiresfrom 0.13-6mm² (26-10A WG). Crimping attachmentsuitable for non-insulated terminals including 1.5, 2.5, 4and 6mm², also insulated auto-ignition terminals 7 and8mm. Crimps insulated terminals 1.5, 2.5 and 6mm².Includes wire cutters hardened to 40-50 HRC.

Stripping Capacity: 0.13-6mm²(26-10AWG)Length: 215mm

DModel No. AK225

D

Automatic Wire Stripping ToolHeavy-Duty

Heavy-duty, professional automatic wire stripper withalloy steel jaws. Fully automatic, single action gripsand strips all types of wire from 0.2-6.0mm² withminimal pressure to handles and no damage to theinner core of the wire. Adjustable length stop is easilyswivelled to allow longer stripping. Precision machinedwire cutting blades for long life. Features threecrimping elements for insulated, non-insulated (1.5-6.0mm²) and auto-ignition terminals (7-8mm).

Stripping Capacity: 0.2-6.0mm²Length: 200mm

FModel No. AK2255

F

A

Cable Shears 250mm

Hardened and tempered high grade steel shears withdipped handles and precision ground cutting edges.Suitable for cutting, stripping and dismantling. Cuts steelrope, thin steel rod, copper and aluminium wire with ease.

Cutting Capacity: Ø4.0-8.75mmLength: 250mm

AModel No. AK8358

Wire Rope/Spring Cutter190mm

High carbon steel blades, hardened, tempered andpolished. Cuts up to Ø5mm wire rope and Ø1.5mmspring wire. Spring loaded handles with vinyl grip andsafety lock.Cutting Capacity: Ø5mm (Wire Rope)

Ø1.5mm (Spring Wire)Length: 190mm

Cutting Nipper 110mm

Manufactured from high quality stainless steel withspring return. Suitable for cutting soft wires and plasticlike cable ties. Sturdy handles for added grip andcomfort.Cutting Capacity: Ø1.2mmLength: 110mm

CModel No. AK2254

C

BModel No. AK503

B B

Position cable. Squeeze handles. Simple!

H

Wire Stripper & CutterCapacity 1.25-5.5mm²

Combination wire stripper and cutter with variablegauge setting, spring return and dipped handles.Stripping Capacity: 1.25-5.5mm²Length: 125mm

HModel No. AK2250

Stripping & Crimping Tool

3mm Steel construction with safety insulated hand grips. Crimps insulated terminals from 0.5 to 6mm². Crimps non-insulated terminals from 1.5 to 6mm². Crops threaded terminals M2.6 to M5. Strips wires from 0.75 to 6mm². Also fitted with wire cutters for soft cables and wires.Length: 250mm

GModel No. AK3851

G

Section 17 Wire Strippers & Shears616

Section 17 Cable Ties & Crimping Terminals 617

Bullet - FemaleModel No: AWG/Colour: Pack Qty:AK8824 22-16/Red 25AK8825 16-14/Blue 25

ButtModel No: AWG/Colour: Pack Qty:AK8834 22-16/Red 25AK8835 16-14/Blue 25

Blade - FemaleModel No: AWG/Colour: Size: Pack Qty:AK8815 22-16/Red 4.8mm 50AK8816 16-14/Blue 4.8mm 50AK8817 22-16/Red 6.3mm 50AK8818 16-14/Blue 6.3mm 50AK8819 12-10/Yellow 6.3mm 25

Blade - MaleModel No: AWG/Colour: Size: Pack Qty:AK8810 22-16/Red 4.8mm 50AK8811 16-14/Blue 4.8mm 50AK8812 22-16/Red 6.3mm 50AK8813 16-14/Blue 6.3mm 50 AK8814 12-10/Yellow 6.3mm 25

Bullet - MaleModel No: AWG/Colour: Pack Qty:AK8822 22-16/Red 50AK8823 16-14/Blue 50

Blade - PiggybackModel No: AWG/Colour: Size: Pack Qty:AK8820 22-16/Red 6.3mm 25AK8821 16-14/Blue 6.3mm 25

Ring Model No: AWG/Colour: Size: Pack Qty:AK8826 22-16/Red 3mm 50AK8827 22-16/Red 4mm 50AK8828 22-16/Red 5mm 50AK8829 16-14/Blue 3mm 50 AK8830 16-14/Blue 4mm 50AK8831 16-14/Blue 5mm 50AK8832 12-10/Yellow 4mm 25AK8833 12-10/Yellow 5mm 25

Model No: Size: Pack Qty:CT25101 2.5 x 100mm 100CT48201 4.8 x 200mm 100CT48301 4.8 x 300mm 100CT48381 4.8 x 380mm 100CT76355 7.6 x 350mm 50CT12655 12.0 x 650mm 50

Cable Ties

Ties manufactured from nylon 66 making them heat resistant over the temperature range -400°C to 850°C.Supplied in handy sized packs. Suitable for workshop, garden and home applications.


A

Cable Tie Pack 250mm - 50pc

Pack of approximately 50 cable ties. One colour.

Size: 4.8 x 250mm

CModel No. CT50

Crimping Terminals

Fully insulated crimping terminals suitable for automotive applications.

Supplied in storage case.

Model No. SEE TABLES

C

Cable Tie Pack 100mm - 200pc

Pack of approximately 200 cable ties. Five colours.

Size: 2.4 x 100mm

DModel No. CT200

D E

2.5 x 100mm 4.8 x 200mm 4.8 x 300mm

4.8 x 380mm 7.6 x 350mm 12.0 x 650mm

123456

1 2 3

4 5 6

F L-

F

G

I

K

J

H

L

ButtBlade Blade Bullet BulletPiggybackRingF G H I J K L

Cable Tie Pack with PliersAssorted Sizes - 375pc

Pack of approximately 375 cable ties. Five colours ofeach size. Includes cable tie cutting pliers.

Sizes: 2.5 x 100mm, 2.5 x 175mm, 4.0 x 200mm

EModel No. CT375

4.8 x 250mm 2.4 x 100mm

Cutting Nipper 110mm

Manufactured from high quality stainless steel withspring return. Suitable for cutting soft wires and plasticlike cable ties. Sturdy handles for added grip andcomfort.Capacity: Ø1.2mmLength: 110mm

BModel No. AK2254

B

Crimping Tool Set 271pc

Crimping tool with insulated grips. Suitable for 1.5, 2.5and 6mm² insulated terminals and 1.5, 2.5 and 4.5mm²non-insulated terminals. Also has cutting blade andfeatures 0.75-6mm² wire stripping and M2.6-M5 studshearing facilities. Approximately 200 assortedterminals and connectors and 70 cable ties supplied, incarry-case.Contents: Crimping Tool, 200 x Assorted Insulated Terminals, 70 x Cable Ties

CModel No. AK8804

C

A

Crimping Tool Set 399pc

5-Function crimping tool with soft rubber grip for comfort and control. Features: Wire cutters. Wire stripper 0.75, 1, 1.5, 2.5, 4, 6mm2. Crimps insulated and non-insulated terminals (1.5, 2.5, 6mm2). Hole shears from M3.5 - M5. Ignition terminals. Supplied with a range of terminals, connectors, cable ties, fuses, crocodile clips, electrical tape, electrical wire,mains tester, long nose pliers, Phillips #1 x 80mm driver, Slotted 4 x 100mm driver, fuse removal/replacementtool and small pair of wire strippers.

Contents: 230mm 5-Way Crimping Tool, 9mtr x 20mm PVC Tape, Mains Tester 110V-250V, 1.5mtr ElectricalWire, 150mm Long Nose Pliers, Phillips #1 x 80 Driver, Slotted 4 x 100mm Driver, 12 x Assorted Blade-Type Fuses, 8 x Ceramic Fuses, 4 x Glass Fuses, 122mm Wire Stripper , Cable Ties 150 x 2.5 x 100mm,30 x 3.2 x 140mm, 30 x 4.8 x 120mm, 10 x 4.8 x 200mm, Magic Ties 40 x 2.4 x 140mm, 7 x 40mm Heat ShrinkTubing, 59 Insulated Terminals, 30 Non-Insulated Terminals, 6 x Wire Clamps, 4 x Crocodile Clips, FuseRemoval/Replacement Tool

AModel No. AK8904

Assorted Terminals 150pc

Assortment of the most popular sizes of ring, maleand female spade, fork and butt insulated crimpingterminals. Eighteen dif ferent types/sizes in a handycompartmentalised case.

Contents: 150 x Assorted Terminals

DModel No. AK8805

D

AUTOMOTIVEFUSES

See page 267 forour full range of Automotive Fuses.

Heat Shrink Tubing Set 127pc

Heat shrink tubes from 2mm to 13mm diameter .Diameter will reduce by up to 50% when heated givingan insulating, water resistant covering. Partitionedcase.Contents: Ø2 x 35mm, Ø2.5 x 35mm, Ø4 x 35mm, Ø5 x 35mm, Ø7 x 75mm, Ø10 x 75mm, Ø13 x 75mm

GModel No. BHS127

G

In-Line Fuse Holder AssortmentSet 12pc

Suitable for adding a fuse to vehicle wiring looms. Fast,simple and strong. Easy application, no crimpers orstrippers required. Includes two sizes of adaptor.AWG/Colour: 14-16/Blue, 18-22/RedFuse Voltage Rating: 32V

FModel No. New FHS12

F

Quick Splice Assortment Set50pc

Fast, simple and strong splicing of electrical wires.Easy to use and does not require wire strippers orcrimpers. Includes two sizes.AWG/Colour: 18-14/Blue, 22-18/Red

EModel No. New QSS50

E

Stripping & Crimping Tool

3mm Steel construction with safety insulated hand grips. Crimps insulated terminals from 0.5 to 6mm². Crimps non-insulated terminals from 1.5 to 6mm². Crops threaded terminals M2.6 to M5. Strips wires from 0.75 to 6mm². Also fitted with wire cutters for soft cables and wires.Length: 250mm

BModel No. AK3851

B

Section 17 Wire Stripping & Crimping Tools618

A

Ratchet Crimping Tool Non-Insulated Terminals

All steel construction with large vinyl grip handles andhardened and tempered jaws. Ratchet action ensuresconsistent crimp tension.

Terminal Suitability: 1.5, 2.5, 6, 10mm²Length: 220mm

BModel No. AK3852

B

C

CABLE TIES

See page 617 for our full rangeof Cable Ties.

InsulatedTerminals

Non-InsulatedTerminals

Ratchet Crimping Tool Kit 552pc

Ratchet crimping tool with laminated steel jaws andinsulated grips. Suitable for 1.5, 2.5 and 6mm²insulated terminals. Approximately 500 assortedterminals supplied, with 50 cable ties and insulatingtape, in carry-case.

Contents: Crimping Tool, 500 x Assorted Insulated Terminals, 50 x Cable Ties, Insulating Tape

CModel No. AK386

Ratchet Crimping ToolInterchangeable Jaws

All steel construction with large soft grip handles. Quickchange hardened and tempered jaws to suit insulatedand non-insulated terminals. Ratchet action ensuresconsistent crimping.

Insulated Terminal Suitability: 0.5-1.0, 1.5-2.5, 4.0-6.0mm²Non-Insulated Terminal Suitability:1.5, 2.5, 6, 10mm²Length: 220mm

DModel No. AK3857

D

Insulated &Non-Insulated

Terminals

Ratchet Crimping Tool Angled Head Insulated Terminals

All steel construction with large comfort grip handles,angled head and hardened and tempered jaws.Ratchet action ensures consistent crimping.

Terminal Suitability: 0.5-1.0mm2, 1.5-2.5mm2, 4.0-6.0mm2

Length: 230mm

EModel No. New AK3863

E

Ratchet Crimping Tool Insulated Terminals

All steel construction with large comfort grip handlesand hardened and tempered jaws. Ratchet actionensures consistent crimping.

Terminal Suitability: 0.5-1.0mm2, 1.5-2.5mm2, 4.0-6.0mm2

Length: 225mm


F

Ratchet Crimping ToolInsulated Terminals

All steel construction with large vinyl grip handles andhardened and tempered jaws. Ratchet action ensuresconsistent crimp tension.

Terminal Suitability: 0.5-1.0mm², 1.5-2.5mm²,4.0-6.0mm²Length: 220mm

AModel No. AK385

D

Section 17 Crimping Tools 619

InsulatedTerminals

InsulatedTerminals

InsulatedTerminals

Mini Pipe Cutter Ø3-22mm

Die-cast cutter body with heavy-duty HSS hardenedcutting wheel. Smooth screw action for clean cuttingperformance.

Capacity: Ø3-22mmReplacement Cutting Wheels: (Pack of 2) AK50581B

AModel No. AK5050

A

Pipe Cutter Ø3-32mm

Die-cast cutter body with fold-away pipe deburring tool.Smooth action thread with one-piece cutter-slide andhardened alloy steel cutting wheel give excellentresults on all types of soft metal tubing.


CModel No. AK5051

C

Ratchet Pipe CutterØ6-23mm

Cutter for copper, aluminium and brass tube and pipefrom Ø6 to 23mm. Spring loaded blade automaticallyadvances through pipe wall without continualadjustment. Ratchet handle enables cutter to be usedin confined spaces. Supplied with spare blade.

Capacity: Ø6-23mmReplacement Cutting Wheels: (Pack of 2) AK5057.B

BModel No. AK5057

B

Zip Action Pipe Cutter Ø3-32mm

Die-cast cutter body with integral pipe deburring tool.Finely adjustable cutter-head with HSS cutting wheelgives clean results on copper and aluminium tubing.Supplied with spare wheel in handle top.


DModel No. AK50581

D

Deburring Tool

Hardened steel blades provide internal and external deburring of copper, brass or aluminium piping. Forpipe up to 42mm external diameter.

Maximum Pipe OD: Ø42mm

Model No. PLT115

Pipe Cutter Ø3-50mm

Heavy-duty die-cast body with hardened steel bladefor cutting steel and cast iron pipe. Two wide rollers forextra control with less burring leaving a clean cut.

Capacity: Ø3-50mmReplacement Cutting Wheels: (Pack of 2) AK5062/B

EModel No. AK5062

E

F

STEEL

CAST IRON

TUBE BENDERSee page 189 for details of our AK5056Tube Bender.

Ø3-22mm Ø6-23mm Ø3-32mm

Ø3-32mm Ø3-50mm

FD

D

G

Reciprocating Air Saw

Suitable for a variety of body shop applications suchas cutting through panels, sills, chassis members etc.Excellent for initial crash-repair preparation when quickremoval of damaged panels is required. Fitted withsafety-trigger device. Supplied with a starter pack ofblades.Max. Cutting Capacity: 2mm (Steel), 2.5mm (Aluminium)Free Speed: 10000spmStroke: 10mmAir Consumption: 6cfmOperating Pressure: 90psiAir Inlet Size: 1/4”BSPWeight: 0.6kg

Model No. SA34

G

Section 17 Pipe Tools620

D

Forged Steel Pipe Wrenches

Drop-forged, steel body with adjustable anodised jaw.Deeply serrated jaws for extra grip.

Model No: Length: Capacity:AK511 250mm 0-38mmAK512 300mm 0-43mmAK513 450mm 0-65mmAK514 600mm 0-80mm


Cast Steel Pipe Wrenches

Shell moulded cast steel handle with high quality drop-forged carbon steel jaws. One-piece head designfor added strength.

Model No: Length: Capacity:AK5101 200mm 9-38mmAK5102 250mm 9-45mmAK5103 300mm 9-45mmAK5104 350mm 13-50mmAK5105 450mm 13-63mmAK5112 610mm 13-75mmAK5113 915mm 13-100mm


Aluminium Alloy Pipe Wrenches

European pattern pipe wrench. Gravity cast aluminiumalloy handle has the strength of steel but at 2/3rds theweight. Drop-forged high carbon steel jaws with toolsteel spring.

Model No: Length: Capacity:AK5106 250mm 9-38mmAK5107 300mm 9-45mmAK5108 350mm 13-50mmAK5109 450mm 13-63mmAK5110 610mm 13-75mmAK5111 915mm 13-100mm

Model No. SEE BELOW

C

B

Pipe Threading & Cutting Set1/4” - 1-1/4” Capacity

Ratchet type pipe threading set with cassette styledie heads. Lightweight design with four tool-steelcutting bits. Snap-in die cassettes allow fastinterchange between pipe sizes. Suitable for iron andstainless steel pipe. Twin ratchet pawl head assemblywith free run facility. Supplied in carry-case.Contents: Ratchet Die Stock, Dies; 1/4”, 3/8”, 1/2”,3/4”, 1”, 1-1/4”, Pipe Cutter #2 10-60mm, Bent Nose Pipe Wrench 1”, Teflon Tape 0.1mm x 26mm x20mtr, Two-piece Handle, Water Pump PliersLength: 730mm

F

F

Model No. PTK993

Bench Mounting Pipe Vice

Cast frame and base with mounting holes. Hingeddesign for easy insertion of pipe into vice. Suitable forelectrical conduits and air installations.Capacity: Ø10-85mmWeight: 5.1kg

GModel No. PV63B

G

PIPE BENDERSSee pages 188 & 189 for our range of Hydraulic Pipe Benders.

A C

Pipe Threading Set3/8” - 2” Capacity

Ratchet type pipe threading set with cassette style dieheads. Lightweight design with four tool-steel cuttingbits. Snap-in die cassettes allow fast interchangebetween pipe sizes. Suitable for iron and stainlesssteel pipe. Twin ratchet pawl head assembly with freerun facility. Supplied in carry-case.Contents: Ratchet Die Stock, Dies; 3/8”,1/2”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2”, Two-piece HandleLength: 715mm

Model No. PTK992

E

E

Pipe Threading Set1/2” - 1-1/4” Capacity

Ratchet type pipe threading set with cassette styledie heads. Lightweight design with four tool-steelcutting bits. Snap-in die cassettes allow fastinterchange between pipe sizes. Suitable for iron andstainless steel pipe. Twin ratchet pawl head assemblywith free run facility. Supplied in carry-case.Contents: Ratchet Die Stock, Dies; 1/2”, 3/4”, 1”, 1-1/4”, Two-piece HandleLength: 580mm

DModel No. PTK991

G

Section 17 Pipe Tools 621

Plastic Pipe & Extrusion Cutter Ø6-42mm

Pistol-type, ratchet action, die-cast aluminium alloybody with heat treated AUS-8 stainless steel bladehoned and shaped for smooth cutting action. Ratchetcutting action avoids crushing pipe. Long life bladesuitable for cutting extrusions and pipes. Textured gripwith rubber inlay gives added comfort and control.

Capacity: Ø6-42mmLength: 210mmReplacement Blade: PC40/B

CModel No. PC40

C

Ø6-42mm

Rubber Hose Cutter Ø3-12.7mm

ABS body with steel, heat treated blade to hardness of50-55 HRC.

Capacity: Ø3-12.7mmLength: 80mm

AModel No. SC127

A

Rubber & Reinforced FlexibleHose Cutter Ø6-25mm

Die-cast zinc alloy body with simple plier action.Suitable for hoses from 6-25mm OD. Simple reversiblesteel blade hardened and tempered to 50-55 HRC.Supplied in pouch.

Capacity: Ø6-25mmLength: 190mmReplacement Blade: HCA25/B

BModel No. HCA25

B

Mini Hacksaw with Bi-MetalBlade

Die-cast zinc frame for durability . Ideal for use inconfined spaces. Accepts 250, 300mm and even brokenblades. Supplied with quality bi-metal hacksaw blade.

DModel No. AK8696

D

Junior Hacksaw

Steel construction with bright chrome plating. Suppliedwith finger guard and two 150mm blades.Replacement Blades: (Pack of 10) AK868/B

EModel No. AK868

E

Ø3-12.7mm Ø6-25mm

FAST FIT AIR SUPPLY SYSTEMSee pages 542 & 543 for our range of Plastic Air Pipes.

Drain Rod Kit 9mtr

Ten flexible rods manufactured from polypropylenewith zinc end connections. 9mtr Length when fullyassembled. Supplied with double worm screw andplunger.Individual Rod Length: 912mmDouble Worm Screw Size: 144mmPlunger Ø: 100mm

FModel No. DRK01

F

Drain Rod Worm Screw

Carbon steel head with zinc end connection.

Length: 144mm

GModel No. DRK03

G

Lever Type Tube BenderØ15 & Ø22mm

Die-cast steel heads suitable for bending copper pipesof Ø15mm and Ø22mm up to 180°. Long, crankedtubular steel handles allow smooth and fast bending.Supplied with two aluminium guide bars for Ø15mmand Ø22mm pipes.Folded Length: 750mmCapacity: Ø15, Ø22mm

HModel No. AK5056

H

Drain Rod Plunger Ø100mm

Rubber plunger fitted with zinc coated connector.

Diameter: 100mm

IModel No. DRK04

I

Section 17 Pipe Tools & Drainage622

Universal Key

Die-cast zinc multifunction key suitable for gas meters,opening service meter cupboards, stopcocks and taps.

Fittings: 2 x Square, Tri-Square, Double Pin

AModel No. AK5059

A

Combination Stopcock Key

Universal crutch head key fits most 13mm(1/2”) and20mm(3/4”) stopcocks situated below ground. T-Handle design features bevelled edge for lifting covers.

Length: 930mm

BModel No. PLT104

C

Adjustable Basin Wrench

Essential tool for limited access fittings on basins andbaths. Forged head with swivel action and springloaded serrated jaws for positive grip. Chrome platedsteel shaft with sliding tommy bar. Suitable for fittingsup to 20mm(3/4”).

Length: 275mmJaw Width: 45mm

DModel No. PLT108

D E

Immersion Heater WrenchBox

Heavy gauge, zinc plated steel box wrench for easyinstallation and removal of electric immersion heaterson water cylinders.

Size: 3-3/8”(86mm)

GModel No. PLT102

G

Heating System Pressure Tester

Hand operated tester suitable for testing heatingsystem integrity and locating leaks and blockages.Fast, simple and reliable operation. W ater filterprevents ingress of debris into the heating system.Rugged construction features rubber bumper onpressure gauge and contoured pump grip.

Maximum Pressure: 60barCapacity: 10ltr

HModel No. HSPT05

H

930mm

F

B

Basin Wrench 255mm

For fitting back nuts and union nuts on bath and sinktaps and other fittings in limited access areas. Drop-forged malleable cast iron wrench can be usedvertically or horizontal.Length: 255mmPipe Fitting Sizes: 15 & 22mm(1/2” & 3/4”)

Model No. PLT107

C

Immersion Heater Wrench Flat

Heavy gauge, zinc plated steel flat handle wrench foreasy installation and removal of electric immersionheaters on water cylinders.

Size: 3-3/8”(86mm)

Model No. PLT100

E Immersion Heater Wrench Cranked

Heavy gauge, zinc plated steel cranked handlewrench for easy installation and removal of electric immersion heaters on water cylinders.

Size: 3-3/8”(86mm)

Model No. PLT101

F

SOLDERING TOOLS

See pages 624 to 626 forour comprehensive rangeof Soldering Tools.

Section 17 Wrenches & Pressure Tester 623

Soldering Wire Dispenser Tube

Tube of flux cored wire for general purpose soldering.

Size: 20g

Professional Soldering Irons

Class 1 electrically insulated soldering irons with coolgrip handle which stays comfortable during prolongeduse. Fitted with replaceable soldering tip. Includes1.5mtr cable with BS approved 230V olt/13Amp plug.

Model No: Power Rating:SD30 30WSD40 40WSD100 100W

Soldering Iron 40W/12V

High quality heater element for thermal stability .Supplied with replaceable soldering tips - chisel andpointed. Ultra-slim textured handle for added grip andcomfort. Includes two insulated crocodile clips with1.5mtr cable.

Soldering Stand with Ø50mmMagnifying Glass

Ideal for awkward jobs where a third hand is needed.Cast steel base for extra stability. Fitted with two, fullyarticulated crocodile clamps and Ø50mm magnifyingglass.

Professional Soldering Kit 8pc

A comprehensive soldering kit comprising 100Watt instant heat soldering gun, 30Watt soldering iron with stand,third hand support, solder-sucker, scraper/probe, spare soldering tips and roll of flux cored solder wire. Solderingirons fitted with BS approved 3 pin 230Volt/13Amp plugs.

BModel No. SD300K

BA

Model No. SEE BELOW

A

Replacement soldering tips - To order use Model No. asprefix followed by: ST for Straight Tip. CT for Curved Tip.

CE

E

H

FModel No. SW20

D

Model No. SD150

H

Soldering Iron 6WattBattery Operated

Powered by three AA cells (not included) and with afine, replaceable tip, this soldering iron is ideal forprinted circuit boards and similar restricted-accesswork. Heat-on-demand button saves battery power .

DModel No. SD06

HOT AIR GUNSSee pages 568 & 569for our full range of HotAir Guns and Plastic Welding Kits.

F

Instant Heat Soldering Gun100Watt

Pistol type, instant heat soldering gun with triggercontrol and tip illumination. Fitted with 1.5mtr cable andBS approved 230Volt/13Amp plug. Supplied with 10gcoil of general purpose solder. Includes one spare tip.

Replacement Tips: (Card of 2) SD02

CModel No. SD200

Solder Sucker

Aluminium/composite construction suitable for suckingexcess solder from joints and components. Pushbutton operation. Fitted with hard wearing Teflon tip.

GModel No. SD151

Model No. SD1240

G

1

2

3

123

230V

230V

230V

12V

Section 17 Soldering Tools624

Electronic Micro Soldering Torch

Piezoelectric ignition with ceramic burner head forsimple operation and long life. 1300°C Burner flameadjustable from 12 to 35mm. Includes bench stand forhands free operation. Standard fill gives approximatelyone hour continuous operation. Powered by Butane(lighter fluid).Height: 155mm

HModel No. AK293

H

Butane Micro Soldering/HeatingTorch Kit 10pc

Portable and lightweight, suitable for heating, solderingand shrinking plus many other applications. Poweredby Butane (lighter fluid). Piezoelectric start and anti-flare device enables quick and clean operation.Supplied in carry-case.

Contents: Micro Soldering Gun, Hot Air Nozzle, Deflector Nozzle, Soldering Head, Soldering Tips x 3,Probe, Hot Knife, Sponge Stand

EModel No. AK2953

E

Micro Butane Torch/Soldering Kit3pc

Portable and lightweight, suitable for heating, solderingand shrinking plus many other applications. Poweredby Butane (lighter fluid). Piezoelectric start and anti-flare device enables quick and clean operation.Contents: Micro Soldering Gun, Soldering Head & Tip, Stand

BModel No. AK2941

B

I

Butane Heating/Soldering Torch Kit 10pc

Portable and lightweight torch with piezoelectric start.Features adjustable heating control up to 450°C (approximately). Removable solder tip transformstorch into burning flame heat source. Supplied with avariety of nozzles for various applications including aflameless heat source adaptor. Safety cap for storage.Sponge cleaning tray and small roll of solder wire.Suitable for heating, soldering and shrinking. Poweredby Butane (lighter fluid).Contents: Butane Solder Torch, Deflector Nozzle,3 x Solder Tips, Hot Knife Tip, Sponge Stand, Safety Cap, Solder Wire, Wrench

FModel No. AK2946

F

C

Butane Heating/Soldering TorchPen Style

Portable and lightweight torch with piezoelectric start.Features adjustable heating control ranging up to 450°C(approximately). Removable solder tip transforms torchinto burning flame heat source. Suitable for heating,soldering and shrinking. Includes safety cap for storage.Powered by Butane (lighter fluid).

DModel No. AK2944

D

G

Cassette Lighter Gas Torch

Ingenious design converts standard lighter intopiezoelectric ignition soldering torch. Produces flame ofapproximately 1300°C. Suitable for a variety of generalpurpose uses from soft soldering to lighting the barbecue.Height: 115mmContents: Cassette Lighter Gas Torch, Refillable Lighter

IModel No. AK404

Butane Soldering Gun

Portable and lightweight torch with piezoelectric start.Features adjustable heating control ranging from 200-400°C (approximately). Removable solder tiptransforms torch into flameless heat source. Suitablefor heating and soldering. Includes safety cap forstorage and acts as a stand for hands-free operation.Powered by Butane (lighter fluid).

CModel No. AK2942

Butane Heating/Soldering TorchPistol Style

Portable and lightweight torch with piezoelectric start.Features adjustable heating control ranging from 200-450°C (approximately). Removable solder tiptransforms torch into burning flame heat source. Benchstand for hands free operation. Suitable for heating,soldering and shrinking. Powered by Butane (lighter fluid).Height: 170mm

GModel No. AK2945

Micro Butane Soldering Torch

Portable and lightweight with removable solder tiptransforms torch into flameless heat source. Suitablefor heating, soldering and shrinking plus many otherapplications. Produces temperature of approximately1300°C. Refillable unit powered by Butane (lighterfluid). Piezoelectric start and anti-flare device enablesquick and clean operation.

AModel No. New AK2947

A

Section 17 Soldering & Heating Torches 625

A

Maxi Butane Heating Torch

Impact resistant, contoured grip torch with stainlesssteel burner nozzle for professional use. Anti-flarefeature enables use of the gun at any angle, evenupside down. 1300°C Maximum flame temperature.Piezoelectric ignition for ease of use. Accepts standardButane self-sealing cartridges (not included).

CModel No. AK2957

C

G H

Micro Butane Soldering/HeatingTorch

Compact, high capacity burner head with push-buttonpiezoelectric ignition. 1750°C Adjustable burner flamesize gives wide application possibilities. Ideal foroccasional plumbing tasks where space may belimited. Accepts standard Butane self-sealingcartridges (not included).

AModel No. AK2955

Micro Butane Heating Torchwith Swivel Head

Compact burner with swivel head and long neckmakes this unit suitable for general heatingapplications, particularly where access is limited. Push-button piezoelectric ignition gives added controland 1450°C flame is adjusted by control on rear ofburner head. Accepts standard Butane self-sealingcartridges (not included).

BModel No. AK2956

(Gas canister not included)



Hot Air Gun Kit

Double insulated hot air gun suitable for paint stripping,soft soldering, removing sticky labels and defrostingpipes. Fitted with two step temperature and air flowcontrol switch. Ball joint cable guide prevents cablewear. Fitted BS approved 3 pin safety plug.Power Output: 766/1583WSupply: 230V - 4.7/6.7ATemperature Range: 316°C/528°CAir Flow: 220/420ltr/minContents: Hot Air Gun, Fish Tail Nozzle, Window Nozzle

DModel No. HS103K

D

Electric Glue Gun

Composite housing with trigger feed. GS Approved.Fitted with 1.3mtr cable with BS approved 3 pin 230Vnon-rewirable fused plug. Includes two glue sticks.

Glue SticksModel No: Pack Qty:AK292/1 6pcAK292/2 25pc

FModel No. AK292

F

SwivelHead

B

Propane Torch Kit 7pc

Suitable for heating and soldering. Control set includes gas valve and rapid flamecontrol. Simply set the minimum flame level and by activating the rapid flamecontrol, the intensity of the flame is instantly adjusted. Supplied with 2mtr rubberhose, propane regulator and selection of nozzles in carry-case.Nozzles: Mini Jet Nozzle, Small Jet Nozzle, Ø23mm Pipe Heating Nozzle

GModel No. LPT7

Propane Torch Kit 14pc

Suitable for heating and soldering. Includes two control sets with gas valve andrapid flame control. Simply set the minimum flame level and by activating the rapidflame control, the intensity of the flame is instantly adjusted. Supplied with 2mtrrubber hose, propane regulator and selection of nozzles in carry-case.Nozzles: Medium Jet Nozzle, Large Jet Nozzle, Ø23mm Pipe Heating Nozzle, Soldering Iron, Heating Nozzles (Small, Medium & Large), Fan Nozzle, Nozzle Extension Tubes; 100mm, 270mm

HModel No. LPT14

230V

230V

Variable Temperature Hot AirGun Kit

Two step air flow control switch, with variabletemperature range on both levels. Gun is designed tostand vertically, allowing use as a safe Bunsen burneralternative. Suitable for paint stripping, soft soldering,removing sticky labels and defrosting frozen pipes.Fitted BS approved 3 pin safety plug. Supplied with fournozzles and scraper, all in a storage case.

For full specification see page 568.

EModel No. New HS107K

E 230V

Section 17 Soldering & Heating Torches626

Pilot Drills

Suitable for use with Sealey and other leading brandsof hole-saw arbor.Model No: Application: Length:HKPD75 HKA1430 75mmHKPD105 HKA32152 105mm

Bi-Metal Hole-Saws

M3-HSS Steel cutting edge welded onto alloy steelbacking for heavy-duty performance. V ari-pitch toothprofile gives clean and fast cut. Suitable for cutting a widerange of metals, alloys and plastics. Cutting depth 38mm.Model No: Diameter: Cutting Depth:BHS16 16mm 38mmBHS19 19mm 38mmBHS22 22mm 38mmBHS29 29mm 38mmBHS32 32mm 38mmBHS38 38mm 38mmBHS40 40mm 38mmBHS44 44mm 38mmBHS51 51mm 38mmBHS57 57mm 38mmBHS60 60mm 38mmBHS64 64mm 38mmBHS70 70mm 38mmBHS76 76mm 38mmBHS83 83mm 38mm


Arbor with Pilot Drill for Hole-Saws Ø14-30mm

Arbor with pilot drill for hole-saws Ø14-30mm.Shank Size: 7/16”HexHole-Saw Size: Ø14-30mm

EModel No. HKA1430D

DModel No. SEE BELOW Arbor with Pilot Drill for

Hole-Saws Ø32-152mm

Arbor with pilot drill for hole-saws Ø32-152mm.Shank Size: 7/16”HexHole-Saw Size: Ø32-152mm

FModel No. HKA32152F

Hardpoint Floorboard Saw300mm Comfort Grip Handle

Professional floorboard saw with hardpoint teeth forprolonged life, which run around the back edge foreasier cutting of boards in situ. Composite handle withcomfort grip. Ideal for medium to thick wood.Blade Length: 300mmBlade Pitch: 7tpi

HModel No. AK8647

H

Tenon Saw 250mm Comfort GripHandle

Professional rigid back tenon saw with cross ground,hardpoint teeth for prolonged life. Composite handlewith comfort grip. Ideal for medium to thick wood.Blade Length: 250mmBlade Pitch: 12tpi

GModel No. AK8642

G

Hardpoint Hand Saw 550mm

Professional hand saw with straight ground, hardpointteeth for prolonged life. Composite one-piece handlewith 45° & 90° tri-square feature. Suitable for cutting arange of materials. Ideal for medium to thick wood.Blade Length: 550mmBlade Pitch: 7tpi

IModel No. AK8644

I

A CB

E

Chalk Powder 100g

Chalk powder for use with chalk lines. Available in blue,red and white colours to allow visibility on dif ferentsurfaces.Model No: Colour:AK2245CB BlueAK2245CR RedAK2245CW White


Laser Level Kit 400mm with Aluminium Base & Tripod

Class II laser spirit level with one vertical and oneadjustable vial for measuring gradients up to 90°. Levelaccuracy 0.5mm in 1mtr (0.028°). Supplied withaluminium rotating base with three levelling feet andbubble level. Also includes 90° prism and line prism forsimple generation of vertical and horizontal referencepoints. Lightweight and fully adjustable aluminiumtripod included. Supplied in carry-case. Powered by 2 xAAA cells (not included).Minimum Laser Height (Tripod & Base): 510mmMaximum Laser Height (Tripod & Base): 1265mmLaser Height (Base Only): 92mm

KModel No. AK9895

K

SURVEYOR’STAPE

See page 633 for details of Surveyor’s Tape.

J

Electrician’s Hole-Saw Kit 9pc

M3-HSS Steel cutting edge welded onto alloy steelbacking for heavy-duty performance. Vari-pitch toothprofile gives clean and fast cut. Suitable for cutting awide range of metals, alloys and plastics. Supplied withpilot drills. Includes simple arbor for saws between Ø14-30mm and quick release arbor for saws betweenØ32-152mm. Supplied in carry-case.Contents: Hole-Saws Ø; 16, 20, 25, 32, 40, 51mm, Arbors & Pilot Drills; HKA1430, HKA32152, Adaptor; Converts HKA1430 for use with Ø32-152mm Saws

BModel No. HKE9

Plumber’s Hole-Saw Kit 9pc

M3-HSS Steel cutting edge welded onto alloy steelbacking for heavy-duty performance. Vari-pitch toothprofile gives clean and fast cut. Suitable for cutting awide range of metals, alloys and plastics. Supplied withpilot drills. Includes simple arbor for saws between Ø14-30mm and quick release arbor for saws betweenØ32-152mm. Supplied in carry-case.Contents: Hole-Saws Ø;19, 22, 29, 38, 44, 57mm, Arbors & Pilot Drills; HKA1430, HKA32152, Adaptor;Converts HKA1430 for use with Ø32-152mm Saws

CModel No. HKP9

K

Section 17 Hole Saws, Hand Saws & Laser Level 627

A B C

Tile Hole Cutter

Tungsten Carbide tipped cutter with cast carbon steelbody. Spring loaded handles with vinyl grips.

Length: 190mm

DModel No. TT103

D E

Half Round FileTungsten Carbide

150mm Tungsten Carbide abrasive half round file,ideal for shaping and smoothing most ceramic andmarble tiles.

Length: 240mm

FModel No. TT106

F

Trowel Set 3pc

Three piece trowel set including pointing trowel,bricklayers trowel and float trowel. Made from carbonsteel with soft grip handles for comfort and control.

Contents: Length:Pointing Trowel: 155mmBricklayer's Trowel: 275mmFloat: 115 x 280mm

GModel No. AK9806

G

Tile Spacers

White plastic spacers for accurate positioning of tiles.Available in 2, 3 & 4mm widths.

Model No: Size: Pack Qty:TT21000 22 x 2mm 1000pcTT2500 22 x 2mm 500pcTT3500 26 x 3mm 500pcTT4500 26 x 4mm 500pc


H

Adhesive Spreader & Grouter

Composite bodied serrated spreader and grouter with180mm rubber blade.

IModel No. TT107

I

C

Quarry Tile Cutting Pliers

Tungsten Carbide tipped cutting edges. Ideal fortrimming and cutting quarry tiles. Drop-forged carbonsteel body. Spring loaded handles with vinyl grips.

Length: 250mm

EModel No. TT105

Tile Cutter with TungstenCarbide Wheel

Tungsten Carbide cutting wheel with integrated tilesnapper. Plate construction with vinyl covered handles.

Length: 190mmReplacement Cutting Wheel: TT102CW

CModel No. TT102

Tile Cutter/Snapper withTungsten Carbide Tip

Tungsten Carbide tipped with knurled carbon steelshaft and tile snapper.

Length: 200mm

BModel No. TT101

Tile Cutter with TungstenCarbide Tip

Tungsten Carbide tipped tile cutter with compositehandle.

Length: 125mm

AModel No. TT100

Section 17 Tiling Tools628

Tile Cutter 300 x 12mm Max Cut

Heavy gauge steel sheet base with foam tilecushioning, measuring scale and replaceableTungsten Carbide cutting wheel. Cut and breakceramic tiles with ease - just place tile on thecushioned base, draw the cutting wheel across the tileto cut it and apply pressure with the breaker foot.

Base Size: 435 x 140mmCutting Capacity:Length: 300mmThickness: 12mmReplacement Cutting Wheel: TC314CW

BModel No. TC314

3-in-1 Tile Cutter 450 x 16mm Max Cut

Heavy gauge steel sheet base with foam tile cushioning,adjustable measuring scale with stop allowing cuttingbetween 0-45° and replaceable Tungsten Carbide cuttingwheel. Cut and break ceramic tiles with ease - just placetile on the cushioned base, draw the cutting wheel acrossthe tile to cut it and apply pressure with the breaker foot.Includes attachment for cutting Ø30-80mm holes.

Base Size: 700 x 205mmCutting Capacity:Length: 450mmThickness: 16mmHole Ø: 30-80mmReplacement Cutting Wheel: TC4163CWReplacement Pilot Drill & Cutter forHole Cutting Attachment: TC4163PDC

AModel No. TC4163

A

Tile Cutter 400 x 14mm Max Cut

Heavy gauge steel sheet base with foam tilecushioning, measuring scale with adjustable stop andreplaceable Tungsten Carbide cutting wheel. Cut andbreak ceramic tiles with ease - just place tile on thecushioned base, draw the cutting wheel across the tileto cut it and apply pressure with the breaker foot.

Base Size: 595 x 165mmCutting Capacity:Length: 400mmThickness: 14mmReplacement Cutting Wheel: TC414CW

CModel No. TC414

C

B

IMPORTANT SAFETY WARNING!!Always wear eye or face protection whenusing these tools! For a full range ofgoggles, visors, gloves and ear defend ers,plus other safety equip ment, see pages707 to 717 of this catalogue.

Blade for TC180

Ø180mm Continuous rimmed diamond cutting blade.Ø22mm Mounting bore.

EModel No. TC180B/04

Tile Cutter 180mm 230V

Powered by 230V olt - 500W att electric motor withthermal overload protection and VDE approvedmagnetic safety switch. Chrome plated table tilts from0° to 45° and is fitted with adjustable parallel cuttingfence. Also includes 45° cutting guide. Supplied withØ180mm continuous rimmed diamond cutting bladesuitable for glazed ceramic, porcelain, quarry , slateand natural stone tiles. Incorporates 3.5litre capacitywater reservoir for blade cooling. Fitted with BSapproved non-rewirable plug.

Motor Power: 500W - 230VBlade Size/Bore: Ø180/22mmSpeed: 2800rpmTable Size: 395 x 385mmMaximum Cutting Depth - 90°: 35mmMaximum Cutting Depth - 45°: 25mm

DModel No. TC180

D

CeramicPorcelain

Quarry

SlateStone

Suitable for:

Supplied with 45° tile cutting template.

E

230V

Section 17 Tiling Tools 629

Trim Knife

Disposable knife with safety cover. Packed in DisplayBox of 100 or Display Card of 5.Length: 145mmModel No: Pack Qty:AK2963 Display Card of 5AK296 Display Box of 100


A B

E

Auto-Retracting Safety Knife

Zinc alloy die-cast handle with contoured grip andhanging hole. Features auto-retracting blade whichprevents inadvertent exposure of cutting edge andsubsequent injury/damage. Satisfies HSErequirements. Supplied with safety blade.Length: 160mmReplacement Blades: (Pack of 10) AK86/B

FModel No. AK863

F

Modeller’s Tool Kit 30pc

Two 120mm precision modeller ’s blade holders, onecomposite handled blade holder with assorted blades,gouges and accessories. Supplied in carry-case.

Contents: Precision Modeller's Blade Holder; Ø8 x120mm, Ø11 x 120mm, Composite Blade Holder 106mm, Sanding Block, Precision Screwdriver, Tenon Saw, Blade Tweezers, Aluminium Mitre Block, Mitre Wedge, Assorted Blades and Gouges (x24), Awl Ø8x 140mm

IModel No. AK241

I

Multi-Change Precision KnifeSet 18pc

Two 110mm precision modeller ’s blade holders, onecomposite handled blade holder, 13 assorted blades,sharpening stone and tweezers. Supplied in storagecase with magnetic blade retainers.

Contents: Precision Modeller's Blade Holder: 2 x Ø7 x 1 10mm, Composite Blade Holder 104mm, Sharpening Stone, Tweezers, Assorted Blades (x13)

JModel No. AK8610

Multi-Change Precision KnifeSet 36pc

Two 110mm precision modeller ’s blade holders, onecomposite handled blade holder, 25 assorted blades,mini planer, cutting guide and bradawls. Supplied instorage case with magnetic blade retainers.Contents: Precision Modeller's Blade Holder: 2 x Ø7 x 110mm Composite Blade Holder 104mm, Sanding Block, Mini Planer, Cutting Guide, W ooden Wedge, Tweezers, Assorted Blades (x25), Bradawls (x3)

KModel No. AK8611

K

Utility Knife

Die-cast grip with retracting safety blade. Suppliedwith one reversible blade.

Length: 155mmReplacement Blades: (Pack of 10) AK86/B

EModel No. AK86

G

Heavy-Duty Retractable Snap-Off Knife

Composite handle with rubber comfort grip and steelreinforced blade holder. Eight section blade automaticallyretracts and locks into position. Supplied with two spareblades in handle storage. Fitted with blade snapper .

Length: 165mmReplacement Blades: (Pack of 10) AK86R/B

BModel No. AK86R

J

Auto-Retracting Safety Knife

Ergonomically profiled zinc alloy body with comfortgrip. Features auto retracting blade which preventsinadvertent exposure of cutting edge and subsequentinjury/damage. Satisfies HSE requirements. Push-release cover for quick blade removal/fitting - no toolsrequired. Integral blade storage in body of knife withpush-button release.Length: 170mmReplacement Blades: (Pack of 10) AK86/B


Heavy-Duty Self LoadingRetractable Snap-Off Knife

Composite handle with rubber comfort grip and steelreinforced blade holder. Eight section blade extendsand retracts into locked position. Body stores up to 10blades which automatically reload when old blade isremoved. Supplied with 10 blades.Length: 165mmReplacement Blades: (Pack of 10) AK86R/B

CModel No. New AK8610R

C

Snap-Off Knife

Composite safety knife supplied with seven sectionblade with locking mechanism. Fitted with integralblade snapper to prevent injury . Sold as single orDisplay Box of 50.Length: 155mmModel No: Pack Qty:AK297S SingleAK297 Display Box of 50Replacement Blades: (20 x Pack of 5) AK297/B


D

Punch Pliers

Steel construction with comfort handle sleeve. Suitablefor punching holes in leather and a variety of othermaterials, including paper, canvas and soft plastics.Punch Diameters: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5mm

HModel No. AK9110

H

Self Loading

Section 17 Cutting Tools630

Staples, Hoops & Nails For AK7061

A selection of replacement staples, hoops and nails forSealey AK7061 and other popular brands.

Model No. SEE BELOW

Heavy-Duty Staple & Nail Gun

Heavy-duty 3-in-1 staple and nail gun. Fitted withadjustable power control and features removable soleplate for easy clearance of blockages. Handy stapleremover also fitted. Suitable for a range of professionalapplications including upholstery , display work anddecorative panelling.Crown Size: 9.5mmApplication/Fixing Sizes:Staples: 6, 8, 10, 12, 14mmHoop Staples: 12mmNails: 10, 12, 14mmSee below for replacement staples, hoops and nails.

DModel No. AK7061

D

4-in-1 Electric Stapler & Nailer230V

Operates with wide and narrow staples up to 14mmlong and nails/pins up to 16mm long, making it suitablefor fastening a wide range of materials from upholsteryto timber . Fitted with a trigger safety catch and a multi-channel staple/nail magazine.Nail Capacity: 10-16mmStaple Capacity: 6-14mmWeight: 1.0kgReplacement Nails & Staples: SEE TABLES E & F

AModel No. AK7062

A

Electric Stapler & Nailer Kit230V

230V Electric stapler and nailer . Accepts nails from 15-30mm and staples 15-25mm. Fires up to 20 shots perminute. Suitable for fastening a wide range of materialsfrom upholstery to timber. Soft grip handle for comfort andcontrol. Fitted with ASTA/BS approved non-rewirable plug.Nail Capacity: 15-30mmStaple Capacity: 15-25mmWeight: 1.2kgReplacement Staples & Nails: SEE TABLES E & F

BModel No. AK7063

B

Electric Nailer 15-32mm230V

230V Electric nailer . Accepts 15-32mm nails firingup to 20 shots per minute. Quick release magazinecover. Suitable for fastening a wide range of materialsfrom upholstery to timber . Soft grip handle forcomfort and control. Fitted with ASTA/BS approved non-rewirable plug.Nail Capacity: 15-32mmWeight: 1.6kgReplacement Nails: SEE TABLE F

CModel No. AK7064

Staples ForAK7062 & AK7063

Application: AK7062Model No: Width x Length: Pack Qty:AK7062.01 4 x 13mm 1000AK7062.02 9.4 x 8mm 1000Application: AK7063Model No: Width x Length: Pack Qty:AK7063.01 6.1 x 15mm 800AK7063.02 6.1 x 20mm 800AK7063.03 6.1 x 25mm 800


Nails ForAK7062, AK7063 & AK7064

Application: AK7062Model No: Type/Size: Pack Qty:AK7062.03 Headed/12mm 1000AK7062.04 Needle/15mm 1000Application: AK7063 & AK7064Model No: Type/Size: Pack Qty:AK7063.04 Headed/15mm 1000AK7063.05 Headed/20mm 1000AK7063.06 Headed/25mm 1000AK7063.07 Headed/30mm 1000


Heavy-Duty Staple Remover

Easily removes heavy-duty staples. Large foot-printminimizes the risk of surface damage. Comfortablehandle facilitates repetitive use.

IModel No. AK707

I

E F

230V

230V

Cable Tacker4-8mm Round 2.5-6.3mm Flat

Heavy-duty cable tacker. Two staple guide plates andtwo sizes of staple allow the tacker to be used on roundcable from Ø4 to 8mm and on flat cable of 2.5 to6.3mm thickness. Supplied with 100 cable staples.Suitable for a wide range of electrical installation tasks.Replacement Cable Staples:Type: Size: Model No:Round Cable Ø4-6mm CT610S01Round Cable Ø6-8mm CT610S02Flat Cable 2.5-4mm Thick CT610S01

<8mm WideFlat Cable 4.5-6.3mm Thick CT610S02

<10.3mm Wide

GModel No. CT610

Cable Tacker8-12.5mm Round 4-7mm Flat

Heavy-duty cable tacker. Three staple guide plates andthree sizes of staple allow the tacker to be used onround cable from Ø8 to 12.5mm and on flat cable of 4 to7mm thickness. Fitted with adjustable pressure control.Supplied with starter pack of 200 cable staples.Suitable for a wide range of electrical installation tasks.Replacement Cable Staples:Type: Size: Model No:Round Cable Ø11.5-12.5mm CT8125S01Round Cable Ø9.5-11mm CT8125S02Round Cable Ø8-9mm CT8125S03Flat Cable 4-7mm Thick CT8125S03

<12.5mm Wide

HModel No. CT8125

H

CT610S01 CT610S02

All replacementstaples suppliedin packs of 200.

CT8125S01 CT8125S02 CT8125S03

G

Staples Hoops NailsModel No: Type/Size: Pack Qty:AK7061/8 Staples/6mm 500AK7061/9 Staples/8mm 500AK7061/2 Staples/10mm 500AK7061/3 Staples/12mm 500AK7061/4 Staples/14mm 500 AK7061/1 Nails/10mm 500AK7061/5 Nails/12mm 500AK7061/7 Nails/14mm 500AK7061/6 Hoops/12mm 500

C

230V

Section 17 Staplers, Nailers & Tackers 631

Woodscrew Assortment GOLD Series in Case2000pc

GOLD Series screw set supplied in metal carry-case with double lock systempreventing accidental opening. Heat treated and hardened to increase breakingtorque. Zinc plated and coated with yellow passivate for corrosion resistance. Thesescrews have a wider thread making them ideal for use with MDF and chipboard aswell as normal soft and hard woods. Set includes nine popular screw sizes plus aselection of wall plugs.Contents: 3 x 12mm x 200pc, 3.5 x 16mm x 200pc, 3.5 x 20mm x 200pc, 3.5 x25mm x 200pc, 4 x 25mm x 200pc, 4 x 30mm x 200pc, 4 x 40mm x 200pc, 4 x 50mm x 200pc, 5 x 70mm x 100pc. Wall Plugs; 5mm x 100pc, 6mm x 100pc, 7mm x 100pc

AModel No. BCS2000

A B

Woodscrew Assortment GOLD Series in Case2400pc

Comprehensive set of GOLD Series screws supplied in metal carry-case withdouble lock system preventing accidental opening. Heat treated and hardened toincrease breaking torque. Zinc plated and coated with yellow passivate for corrosionresistance. These screws have a wider thread making them ideal for use with MDFand chipboard as well as normal soft and hard woods. Set includes a selection offourteen popular screws.Contents: 3 x 12mm x 200pc, 3.5 x 12mm x 200pc, 3.5 x 16mm x 200pc, 3.5 x 20mm x 200pc, 3.5 x 25mm x 200pc, 3.5 x 30mm x 200pc, 4 x 25mm x 200pc, 4 x 30mm x 200pc, 4 x 40mm x 200pc, 4 x 50mm x 200pc, 5 x 50mm x 100pc, 5 x 70mm x 100pc, 5 x 80mm x 100pc, 6 x 100mm x 100pc

CModel No. BCS2400

C

Woodscrew Assortment SILVER Series in Case2000pc

SILVER Series screw set supplied in metal carry-case with double lock systempreventing accidental opening. Thinner shank with double helix thread reduces therisk of wood split and drives into the wood faster than standard screws. Heat treatedand hardened to increase breaking torque and zinc coated for corrosion resistance.Ideal for use on hard, soft and man-made woods. Set includes nine popular screwsizes plus a selection of wall plugs.Contents: 4 x 1/2” x 200pc, 6 x 5/8” x 200pc, 6 x 3/4” x 200pc, 6 x 1” x 200pc,8 x 1” x 200pc, 8 x 1-1/4” x 200pc, 8 x 1-1/2” x 200pc, 8 x 2” x 200pc, 10 x 2-1/2” x 100pc, Wall Plugs; 5mm x 100pc, 6mm x 100pc, 7mm x 100pc

BModel No. BWS2000

Woodscrew Assortment SILVER Series in Case2400pc

Comprehensive set of SILVER Series screws supplied in metal carry-case withdouble lock system preventing accidental opening. Thinner shank with doublehelix thread reduces the risk of wood split and drives into the wood faster than standard screws. Heat treated and hardened to increase breaking torque and zinccoated for corrosion resistance. Ideal for use on hard, soft and man-made woods.Set includes a selection of fourteen popular screw sizes.Contents: 4 x 1/2” x 200pc, 6 x 1/2” x 200pc, 6 x 5/8” x 200pc, 6 x 3/4” x 200pc, 6 x 1” x 200pc, 8 x 1” x 200pc, 6 x 1-1/4” x 200pc, 8 x 1-1/4” x 200pc, 8 x 1-1/2” x 200pc, 8 x 2” x 200pc, 10 x 2” x 100pc, 10 x 2-1/2” x 100pc, 10 x 3” x 100pc, 12 x 4” x 100pc

DModel No. BWS2400

D

GOLDSeries

GOLDSeries

SILVERSeries

SILVERSeries

Cordless Impact Driver 14.4V1hr Charge 2 Batteries

Powerful, compact, cordless impact driver withelectronic variable speed trigger. Forward, reverse andtrigger lock control integrated into housing for ease ofuse. Superbly balanced tool with vibration reducing grip.Features replaceable motor brushes and quick-releasebit holder. Includes two 14.4Volt Ni-Cd battery packsand 1 hour mains charger all supplied in a carry-case.

Battery: 14.4VDrive Size: 6mm Hex Quick-ReleaseNo Load Speed: 0-2100rpmImpact Rate: 0-2900bpmMaximum Torque: 135Nm (100lb.ft)Replacement Battery: CP1441BPWeight: 1.74kg

EModel No. New CP1441

E

GripMAX® Screwdriver Set 8pc

Extra strong Chrome Molybdenum shafts with satinfinish. Shot blasted and magnetized tips. Hexagonalprofile design with ribbed handle for maximum powertransfer from hand to fixing. Impact resistant handlewith hanging hole.Contents: Pozi; #0 x 75, #1 x 80, 2 x 100mm, Slotted; 3 x 75, 4 x 80, 5.5 x 125, 6.5 x 150, 6.5 x 38mm

FModel No. AK4301

F

POWER TOOLS

For our complete range of Power Tools

see pages 558 to 569.

Section 17 Woodscrews632

14.4V

1 HourCharge

Rubber Covered Measuring TapeMetric/Imperial Scale

High visibility, composite case with rubber cover, wriststrap and belt clip. Steel blade with Metric and Imperialscale and magnetic tip. Strong rewind mechanism withslide-button lock and push-button locks on side andbase for added versatility.Model No: Length: Width:AK988 3mtr(10ft) 16mmAK989 5mtr(16ft) 19mmAK990 7.5mtr(25ft) 25mm


A Metric/ImperialScale

Metric/ImperialScale

Rubber Covered Measuring TapeMetric Scale 5mtr

High visibility, composite case with rubber cover, wriststrap and belt clip. Steel blade with Metric scale onboth edges and magnetic tip. Strong rewindmechanism with slide-button lock and push-buttonlocks on side and base for added versatility.

Tape Length: 5mtrTape Width: 19mm

BModel No. AK989M

B

TRIPLEBLADE LOCKS

TRIPLEBLADE LOCKS

Self Retracting Measuring TapeMetric/Imperial Scale 7.5mtr

High visibility, composite case with rubber inserts, wriststrap and belt clip. Nylon coated, magnetic tipped, steelblade clearly marked in Metric and Imperial with studcentre marks every 16”. Magnetic blade tip. Strongrewind mechanism with slide-button lock and push-button locks on side and base for added versatility .

Tape Length: 7.5mtr(25ft)Tape Width: 25mm

CModel No. AK9825

C

TRIPLEBLADE LOCKS

Autolock Measuring TapeMetric/Imperial Scale 3mtr

High visibility composite case with rubber cover , wriststrap and belt clip. Steel blade with Metric and Imperialscales. For ease of use the extended blade isautomatically locked and a push-button controls rewind.

Tape Length: 3mtr(10ft)Tape Width: 16mm

DModel No. AK993

D

Autolock Measuring TapeMetric/Imperial Scale 5mtr



EModel No. AK994

Autolock Measuring TapeMetric/Imperial Scale 7.5mtr


Tape Length: 7.5mtr(25ft)Tape Width: 25mm

FModel No. AK995

F

Rubber Covered Surveyor’s TapeMetric/Imperial Scale 30mtr

High visibility , composite case with rubber cover .Flexible steel Metric/Imperial tape with ground spike.Geared rewind, with folding handle, for rapid recovery.


GModel No. AK9830

G

INSETHANDLE

H LASERALIGNMENT

Range Meter0.6-15mtr

Professional electronic distance measuring tool.Measures distance instantly at the touch of a button,with a range of 0.6-15mtr(2-49ft) and accurate to±0.3%. Features temperature compensation to ensureaccuracy in hot and cold weather, built-in laser to assistaiming, calculator with memory function to hold up to10 measurements. LCD display shows measurementsand calculations of area or volume in both Imperial andMetric units. Automatic power off. Powered by 9Voltcell (not included).Effective Range: 0.6-15mtr(2-49ft)Accuracy: ±0.3%

HModel No. AK2015

Contour Gauge

Steel pins with spring loaded holder . Quickly gaugesprofiles. Integral Metric and Imperial rules. Suitable forflooring, tiling, woodworking and plumbing.

Maximum Profile Depth: 50mmMaximum Profile Length: 150mm

IModel No. AK63

I

MetricScale

AK989 Also available as Display Box of 12 - Model No AK98912

E Metric/ImperialScale




Section 17 Measuring Tapes 633

Section 18Woodworking635 Log Splitters & Mitre Saws636 Table Saws637 Bandsaws638 Scroll Saws & Mortisers639 Belt, Disc & Bobbin Sanders640 Planers & Thicknessers641 Wood Turning Lathes642 Lathe Tools & Dust Extractors643 Saws, Hammer Drills & Router644 Woodworking Tools & Workbench645 Marking Tools & Planes646 Clamps647 Sash Clamps, Vices & Mitre Saw648 Roller Stands649 Stands & Trestles

Model No:Supply:Motor Power:Blade Size:Blade Speed:Positive Mitre Lock:Blade 90°/Mitre 0°:Blade 90°/Mitre 45°:Blade 45°/Mitre 0°:Blade 45°/Mitre 45°:Dust Extraction Port:Weight:Replacement Blades:

Positive lock in preset mitre positions 0°, 15°,22.5°, 30°, 45°.

All sliding mitre saws are fitted with laserguide for accurate cutting.

Blade and table can be adjusted for compound angle cutting.

Quick and easy clamping.

Compound Sliding MitreSaws

Lightweight portable saws with aluminium base,chassis and machined aluminium table. Featuressliding action, table extension wings and work clamp.Laser guide enables user to accurately align cutavoiding miscutting and wastage. Trigger control withsafety catch provides added user safety. Blade guardincludes Ø35mm dust extraction port with removabledust-bag. Saw arm features ±45° mitre with positivestop and 45° bevel for cutting compound mitres.Supplied with TCT saw blade. Saw arm latches closedfor easy storage and transport.

Model No. SEE RIGHT

SMS12230V

1800W305 x 25mm

4200rpm0°, 15°, 22.5°, 30°, 45°

100 x 310mm100 x 215mm

55 x 310mm55 x 215mm

Ø35mm19kg

40/60* TPU

C D-

C D

LASER

GUIDE

LASER

GUIDE

Ø255mm Ø305mm

LASER

GUIDE

*Denotes standard blade. For replacement blade Model Number add Mitre Saw number + B and teeth size i.e. SMS10B60 = 60 tooth blade for SMS10.

DC

SMS10230V

1800W255 x 25mm

4600rpm0°, 15°, 22.5°, 30°, 45°

75 x 300mm75 x 210mm40 x 300mm40 x 210mm

Ø35mm18kg

40*/60 TPU

Log Splitter 5ton 520mm Capacity

Safe and easy way to split logs, of fering continuous sizingand up to 5ton of pressure. Splits logs almost instantly uponcontact, keeping labour and work time to a minimum. Fittedwith a two hand safety operation, push-button and lever.Maximum Log Length x Ø: 520 x 250mmMaximum Load Pressure: 5tonMotor Power: 2200W - 230VOverall Size (W x D x H): 940 x 270 x 510mmWeight: 42kg

Model No. New LS520HA B

A

Log Splitter 5.5ton1050mm Capacity Vertical Type

Safe and easy way to split logs, of fering continuoussizing and up to 5.5ton of pressure. Three tier tablesystem allows workpiece to be as near to wedge aspossible minimising splitting time. Fitted with a two handsafety operation, twin pull-in and push-down levers.Tier Log Lengths: 540, 790, 1050mmMaximum Log Ø: 320mmVertical Ram Travel: 500mmMaximum Load Pressure: 5.5tonMotor Power: 3000W - 230VOverall Size (W x D x H): 565 x 840 x 1520mmWeight: 97kg

Model No. New LS1050V

B

520mm5ton

1050mm

5.5ton

Section 18 Log Splitters & Mitre Saws 635

Table Saw 200mm

Fully approved to CE regulations this hobby saw offersmany of the features of larger machines at anaffordable price. Powerful 600Watt motor for accuratecutting up to 42mm at 90°.

Motor Power: 600W - 230VSaw Blade Ø: 200mmArbor Ø: 16mmSpeed: 2950rpmMaximum Depth of Cut @ 90°: 42mmMaximum Depth of Cut @ 45°: 25mmTable Size: 500 x 335mm

AModel No. HTS8

A

Contractor’s Table Saw 315mm

Fully approved to CE regulations this 315mmcontractor’s saw is full of features and ideal for theserious enthusiast and professional workshop. Fittedwith no-volt release safety switch, extension table anddust extraction. Full blade tilt up to 45°, with amaximum cut of 90mm @ 90°. Fitted with handle andwheels for easy manoeuvrability around the workshop.Includes sliding carriage.

Motor Power: 2000W - 230VSaw Blade Ø: 315mmArbor Ø: 30mmSpeed: 2950rpmMaximum Depth of Cut @ 90°: 90mmMaximum Depth of Cut @ 45°: 60mmMain Table Size: 800 x 550mmOutput Extension Table Size: 800 x 400mmDust Extraction Ø: 28mm

CModel No. TS12CZ

BØ200mm Ø254mm

C Ø315mm

Table Saw 254mmwith Stand & Extension Tables

Large die cast aluminium table with one rear and twoside extension tables. Adjustable blade height and tilt,up to 45°. Fitted with no-volt release safety switch foruser safety. Includes quick lock rip-fence, mitre gauge,dust extraction port, push stick and metal stand. Fittedwith BS approved 13Amp non-rewirable plug.

Motor Power: 1500W - 230VSaw Blade Ø: 254mmArbor Ø: 20mmSpeed: 5700rpmMaximum Depth of Cut @ 90º: 75mmMaximum Depth of Cut @ 45º: 60mmTable Size: 440 x 625mmTable Extension Sizes:Side (x2): 245 x 585mmRear: 320 x 435mmTable Size with Extensions: 915 x 940mmDust Extraction Ø (Taper): 40mm

BModel No. TS10SEW

Supplied With Stand & Extension

Tables

Section 18 Table Saws636

Ball bearing blade guides forsmooth operation*.

Micro switches on all doors.

Wheel brush helps keep dustand debris clear.

Saw chassis features integralextraction port.

A B

C D

Model No: Size: TPI: Application:SM1303B06 1400 x 6.5mm 6 SM1303SM1303B10 1400 x 6.5mm 10 SM1303SM1303B14 1400 x 6.5mm 14 SM1303SM1303B24 1400 x 6.5mm 24 SM1303SM1304B06 1712 x 10mm 6 SM1304SM1304B10 1712 x 10mm 10 SM1304SM1304B14 1712 x 10mm 14 SM1304SM1304B24 1712 x 10mm 24 SM1304SM1305B06 2240 x 12mm 6 SM1305SM1305B10 2240 x 12mm 10 SM1305SM1305B14 2240 x 12mm 14 SM1305SM1305B24 2240 x 12mm 24 SM1305SM1306B06 2400 x 12mm 6 SM1306SM1306B10 2400 x 12mm 10 SM1306SM1306B14 2400 x 12mm 14 SM1306SM1306B24 2400 x 12mm 24 SM1306

Bandsaw Blades

Flexible bandsaw blades with hardened steel teeth.Suitable for cutting wood, plastics and thin metal sheet.


Professional Bandsaws

Fully approved to current CE regulations. Steel chassiswith locking blade wheel covers. Smooth operation bybearing mounted blade wheels and belt drive inductionmotors. Micro switches prevent operation when eitherblade wheel cover is open. No-volt release switchesprevent uncontrolled blade re-start after powerinterruption. Suitable for cutting wood and plastics.Fitted with tilting tables for cutting compound mitres.SM1305 and SM1306 supplied with metal stands.Fully adjustable blade tracking and tensioning forprecise cutting action. Supplied with quick adjusting ripfence, mitre gauge, dust extraction port, blade wheelbrushes and push sticks.

Model No. SEE TABLE

A D-

A B D

Table tilts 45° for bevel cutting.

Adjustable height blade guideassembly.

200mm 245mm

305mm 335mm

Model No: SM1303 Throat Depth: 200mmMaximum Cutting Height: 80mmTable Size: 300 x 300mmTable Tilt: 0-45°Blade Length: 1400mmCutting Speed: 900mtr/minMotor Power: 250WSupply: 230VDust Extraction Ø: 60mm

SM1304245mm105mm

340 x 335mm0-50°

1712mm730mtr/min

370W230V

60mm

SM1305305mm165mm

500 x 400mm0-45°

2240mm360, 660mtr/min

550W230V

100mm

SM1306335mm165mm

500 x 400mm0-45°

2400mm540, 660mtr/min

750W230V

100mm

C

2 Speed 2 Speed

Heavy-duty quick-lock fenceguides.

*Illustration shows SM1305 and SM1306 assembly.

Section 18 Bandsaws 637

No-Volt release switchesprevent uncontrolled bladerestart after power interruption.

Scroll Saw406mm Throat

Fully CE approved scroll saw suitable for cuttingintricate shapes in wood, plastic and thin metal sheet.Fitted with eyeshields/safety guard and dust blower .

Throat Depth: 406mmMaximum Cut: 50mmStroke: 19mmSpeed: 1440spmTable Size: 365 x 200mmTable Tilt: 0-45º LeftMotor Power: 85WSupply: 230V

AModel No. SM43

A

Variable Speed Scroll Saw406mm Throat

Fully CE approved scroll saw with quality cast table.Features parallel arm design and quick blade changingsystem. Variable speed operation to cut multiple typesof materials. Fitted with adjustable safety guard andflexible dust blower . Optional lamp unit available, Model No. SM1302LU.

Throat Depth: 406mmMaximum Cut: 50mmStroke: 15mmVariable Speed: 400-1600spmTable Size: 410 x 253mmTable Tilt: 0-45° LeftMotor Power: 120WSupply: 230V

BModel No. SM1302

B VARIABLE SPEED

SM1302 illustrated with optional lamp unit SM1302LU

Hollow Chisel Mortiser

Bench mounting mortising machine suitable for cuttingmortises for joints, locks and dead-bolts. Twin uprightswith hydraulic damper carry head assembly and haveadjustable depth stop for repetitive work. Integral drillchuck is easily accessible from both sides of the head.Powered by heavy-duty induction motor with no-voltrelease switch to prevent accidental restart after powerfailure or jam. Supplied with arbor extension and 13mmdrill chuck for occasional drilling operations. Includestable and clamp assembly. Mortising chisels included.Chisel Size: 1/4”, 3/8”, 1/2”Chuck: 13mmSpindle Travel: 115mmThroat Depth: 135mmChisel End-Table: 120mmHold Down Capacity: 75mmTable Size: 340 x 150mmMotor Power: 370W - 230VDimensions (W x D x H): 340 x 335 x 650mmWeight: 25kg

CModel No. SM94

C

Mortising Chisels with Drill

Suitable for Sealey SM94 and SM96 hollow chiselmortisers. Supplied complete with mortise drill.Model No: Size:SM94CDS14 1/4”SM94CDS38 3/8”SM94CDS12 1/2”SM96CDS58 5/8”SM96CDS34 3/4”SM96CDS1 1”


D

Heavy-Duty Hollow ChiselMortiser with Stand

Heavy-duty mortising machine suitable for cuttingmortises up to 1” for joints, locks and dead-bolts.Vertical assembly with hydraulic damper , scalemeasure, adjustable depth and headstock stops.Horizontal assembly with scale measure, adjustabletable and work stops for repetitive work. Table withcomplete clamping system with vice and two clamps.Two hand wheels for table adjustment. Integral drillchuck is easily accessible from both sides of the head.Powered by heavy-duty induction motor with no-voltrelease switch to prevent accidental restart after powerfailure or jam. Supplied with 16mm drill chuck, 1”mortising chisel and bit, chuck key and hex keys.Mounted on stand, useable as parts cabinet.Chisel Capacity: 1/4” - 1”Chuck Capacity: 16mmSpindle Travel: 220mmChisel Centre-Fence: 145mmTable Size: 400 x 150mmBase Size: 300 x 450mmSpindle Speed: 1400rpmMotor Power: 750W - 230VDimensions (W x D x H): 550 x 820 x 1530mmWeight: 99kg

DModel No. SM96

Model No: Blade Pitch: Pack Qty:SM43B10 10tpi 12SM43B15 15tpi 12SM43B20 20tpi 12SM43B25 25tpi 12

Scroll Saw Blades

Scroll saw blades with hardened steel teeth suitable forcutting wood, plastics and thin metal sheet. Suitable forSealey SM43, SM1302 and other brands of scroll saws.


Section 18 Scroll Saws & Mortisers638

C

Bench-Top Belt/Disc Sander915 x 100mm

Bench mounting semi-portable belt and disc sandersuitable for general woodworking applications.Powerful induction motor with smooth, bearing-mounted drive pulleys gives quiet operation. Sandingdisc table tilts to 45° and is supplied with mitre gaugefor accurate angle sanding. Belt can be usedhorizontally, vertically or any angle in-between.

Belt Size: 915 x 100mmBelt Speed: 460mtr/minDisc Ø: 150mmDisc Speed: 2950rpmTable Size: 225 x 160mmTable Tilt: 0-45°Motor Power: 500W - 230VDust Extraction Ø: 35mmWeight: 22kgReplacement Sanding Belts:Model No: Grade:SM14/B060G 60GritSM14/B100G 100GritReplacement Sanding Disc:Model No: Grade:SM14/D80G 80Grit

BModel No. SM14

BA

SM14 and SM15can be set up withvertical belt.

Picture illustratesSM15.

Floor Standing Belt/Disc Sander1220 x 152mm

Fitted with heavy-duty induction motor. Sanding disctable tilts up to 45° and is supplied with mitre gauge foraccurate angle sanding. Belt can be used horizontally,vertically or any angle in-between. Supplied with floorstand.

Belt Size: 1220 x 152mmBelt Speed: 330mtr/minDisc Ø: 230mmDisc Speed: 1400rpmTable Size: 305 x 159mmTable Tilt: 0-45°Motor Power: 550W - 230VOverall Dimensions (H x W x L):995 x 455 x 715mmDust Extraction Ø: 55mmWeight: 55kgReplacement Sanding Belts:Model No: Grade:SM15/B080G 80GritSM15/B100G 100GritReplacement Sanding Disc:Model No: Grade:SM15/D80G 80Grit

CModel No. SM15

Bench-Top Disc Sander305mm

Bench mounting semi-portable disc sander suitable forgeneral woodworking applications. Powerful inductionmotor with smooth direct drive. Balanced aluminiumsanding disc suitable for adhesive backed discs.Includes no-volt load release switch for extra safety .Sanding disc table tilts to 45°and is supplied with mitregauge for accurate angle sanding.

Disc Ø: 305mmDisc Speed: 1450rpmTable Size: 156 x 438mmTable Tilt: 45°Motor Power: 750W - 230VDust Extraction Ø: 52mmWeight: 29.5kgReplacement Sanding Disc: SM31/38*

*Add V for hook-and-loop version.

AModel No. SM31

IMPORTANT SAFETY WARNING!!Always wear eye or face protection whenusing these tools! For a full range ofgoggles, visors, gloves and ear defend ers,plus other safety equipment, see pages 707 to 717 of this catalogue.

Bobbin Sander Sleeves

Model No: Size: Grit:SM1301SS01 19 x 90mm 60SM1301SS02 19 x 90mm 80SM1301SS03 19 x 90mm 120SM1301SS04 25 x 90mm 60SM1301SS05 25 x 90mm 80SM1301SS06 25 x 90mm 120SM1301SS07 38 x 140mm 60SM1301SS08 38 x 140mm 80SM1301SS09 38 x 140mm 120SM1301SS10 44 x 140mm 60SM1301SS11 44 x 140mm 80SM1301SS12 44 x 140mm 120SM1301SS13 50 x 140mm 60SM1301SS14 50 x 140mm 80SM1301SS15 50 x 140mm 120SM1301SS16 76 x 140mm 60SM1301SS17 76 x 140mm 80SM1301SS18 76 x 140mm 120

Model No. SEE BELOW

D

EBobbin Sander

Fitted with heavy-duty motor. Features large cast ironwork table and side wings for holding six bobbins andtable inserts. V ertical oscillating spindle action forsmooth finish, preventing burning of work and spreadingwear along the length of the abrasive. Includes six tableinserts, three bobbins and dust extraction port.

Maximum Bobbin Height: 110mmMaximum Length of Bobbin: 140mmOscillating Stroke: 24mmOscillations: 24opmTable Tilt: 0-45°Table Size: 370 x 370mmWork Table Height: 475mmSpeed: 1400rpmDust Extraction Ø: 50mmBobbins Included: 19 x 90, 38 x 140, 50 x 140mmBobbins Optional: 25 x 90, 44 x 140, 76 x 140mmMotor Power: 370W - 230VWeight: 31kg

DModel No. SM1301

E

Section 18 Belt, Disc & Bobbin Sanders 639

B C&

DPlaner 150mm

Portable power planer with heavy-duty cast table foraccurate and smooth planing. Accurate fence tiltsbetween 45° and 90°. Fitted with two blades capable ofplaning timber up to 150mm wide. No-volt releaseswitch prevents uncontrolled re-start after powerinterruption. Dust extraction port with collection bag.Adjustable cutting depth up to 3mm.

Motor Power: 1100W - 230VMaximum Cutting Width x Depth: 150 x 3mmCutter-Head Speed: 10000rpmFence Angle: 45-90°Working Table Size: 650 x 160mmWeight: 17kg

AModel No. SM1310

Planers & Thicknessers

PlanersSometimes called Jointers or Surface Planers, theseunits are designed to plane the face on uneven andrough wood, then squaring an edge against that surface. The workpiece is fed slowly by hand over thetable whilst pressing against the side fence. It is important not to remove to much wood in one pass (no more than 3mm) in order to achieve a flat surface.

ThicknessersThe Thicknesser can be adjusted to a desired heightso that a previously planed surface can pass over thetable producing a constant thickness. All of our thicknessers are motor driven allowing the workpieceto self feed at the correct speed.

A

Planer/Thicknesser 200 x 120mm

Compact and portable power planer/thicknesser withheavy-duty cast table for accurate and smoothoperation. Accurate fence tilts between 45° and 90°.Fitted with two blades capable of handling timber up to200mm wide. Easy conversion from planer tothicknesser. Safety power micro switch ensures dustsafety guard is fitted correctly preventing incorrectsetup. Thicknesser fitted with feed rollers. No-voltrelease switch prevents uncontrolled re-start afterpower interruption. Includes dust extraction port.

Motor Power: 1250W - 230VMaximum Cutting Width x Depth: 200 x 2mmMaximum Thicknessing Capacity: 120mmFeed Rate: 7mtr/minCutter-Head Speed: 8000rpmFence Angle: 45-90°Working Table Size: 737 x 210mmWeight: 29kg

BModel No. SM1311

B

Thicknesser 330 x 152mm

Compact design with folding tables for easy storageand transportation. Fitted with two blades capable ofhandling timber up to 330mm wide. Four post designfor added stability allowing smooth operation of cutter-head. Includes dust extraction port. Large tablefully polished to aid smooth feed of timber . No-voltrelease switch prevents uncontrolled re-start afterpower interruption. Suitable for high capacitythicknessing operations, provides quality surface finish.

Motor Power: 1500W - 230VMaximum Cutting Width x Depth: 330 x 2mmMaximum Thicknessing Capacity: 152mmFeed Rate: 8.8mtr/minCutter-Head Speed: 6500rpmWorking Table Size: 330 x 235mmWeight: 36kg

CModel No. SM1312

C

Planer/Thicknesser250 x 150mm

Three-bladed cutter capable of handling timber up to250mm wide. Quick and easy conversion between planer and thicknesser modes, with micro switches toprevent incorrect set-up. Fully automatic material feedwith anti kick-back when thicknessing. Large tablesfully polished to aid smooth feed of timber . No-voltrelease switch prevents uncontrolled re-start afterpower interruption. Dust extraction port. Suitable forhigh capacity planing and thicknessing operations,providing quality surface finish. Mounted on stand withlockable storage facility.

Motor Power: 1500W - 230VMaximum Cut Width x Depth: 250 x 3mmMaximum Thicknessing Capacity: 150mmFeed Rate: 4.6mtr/minCutter-Head Speed: 5200rpmFence Angle: 45-90°Working Table Size: 1060 x 340mm (Max)Weight: 103kg

DModel No. SM1314

200 x 2mm

150 x 3mm

250 x 3mm

330 x 2mm

Section 18 Planers & Thicknessers640

Wood Lathe 900mm10 Speed with Stand

Manufactured to comply with CE requirements. Powered by smooth operating450Watt induction motor. Plate clutch allows seamless speed changes without theneed to stop the motor and adjust belts and pulleys. Hollow centred head and tailstocks allow hole boring. One-piece machined lathe bed with head stock extensionfor bowl turning and sanding operations. Head stock rotates through five presetpositions for outboard bowl turning. Includes floor stand and BS approved 3-pin plug.

Supplied with: Face Plate, Live & Dead Centres, Revolving Dead Centre, Tool Rest & WrenchesTurning Capacity - Over Bed: 310mmTurning Capacity - Over Tool Rest: 210mmThread Size: 3/4” x 16tpiDistance Between Centres: 900mmTailstock Taper: MT1Turning Speeds: 500-2000rpmMotor Power: 450W - 230V

CModel No. SM900

C

Wood Lathe 1100mm10 Speed with Stand

Manufactured to comply with CE requirements. Powered by smooth operating550Watt induction motor. Plate clutch allows seamless speed control without theneed to stop the motor and adjust belts and pulleys. Hollow centred head and tailstocks allow hole boring. One-piece machined lathe bed with head stock extensionfor bowl turning and sanding operations. Head stock rotates through five presetpositions for outboard bowl turning. Includes floor stand and BS approved 3-pin plug.

Supplied with: Face Plate, Live & Dead Centres, Revolving Dead Centre, Tool Rest & WrenchesTurning Capacity - Over Bed: 370mmTurning Capacity - Over Tool Rest: 270mmThread Size: 3/4” x 16tpiDistance Between Centres: 1100mmTailstock Taper: MT2Turning Speed Range: 500-2000rpmMotor Power: 550W - 230V

DModel No. SM1100

D

900mmBetween Centres

Mini Wood Lathe 330mmVariable Speed

Manufactured to comply with latest CE requirements.Powered by 250Watt motor with no-volt load releaseswitch which prevents re-start after the mains power hasbeen interrupted. Cast iron construction throughout withone-piece bed. Variable speed enables lathe to be usedfor a variety of jobs. Fitted with a BS approved, non-rewirable 3-pin plug and cable. Ideal for bench mounting.

Supplied with: Face Plate, Live & Dead Centres,110 & 178mm Tool RestsTurning Capacity - Over Bed: 200mmTurning Capacity - Over Tool Rest: 175mmThread Size: 3/4” x 16tpiDistance Between Centres: 330mmTailstock Taper: MT1Turning Speeds: 700-3200rpmMotor Power: 250W - 230V

AModel No. SM1307

A B

VARIABLE SPEED




Head stock rotates for large bowl turning. Head stock rotates for large bowl turning.

Wood Lathe 1000mm

Manufactured to comply with latest CE requirements, this economy lathe is ideal for the first time user. Poweredby 370Watt motor with no-volt load release switch which prevents re-start after the mains power has beeninterrupted. Solid head and tail stocks. Lathe bed with twin bar construction. Four turning speed options to suita variety of jobs. Fitted with a BS approved, non-rewirable 3-pin plug and cable.

Supplied with: Live & Dead Centres, 305mm Tool RestTurning Capacity - Over Bed: 350mmTurning Capacity - Over Tool Rest: 290mmThread Size: 3/4” x 16tpiDistance Between Centres: 1000mmTailstock Taper: n/aTurning Speeds: 850, 1250, 1750, 2510rpmMotor Power : 370W - 230V

BModel No. SM1308

VARIABLE SPEED VARIABLE SPEED

4 Speed

Section 18 Wood Turning Lathes 641

Wood Lathe Accessories

A full range of quality accessories for the SM1307,SM1308, SM900 and SM1 100 wood lathes. Will fitother brands of wood turning lathe.

Model No: Description:SM42/ACC1* Key Chuck (MT1) 13mmSM42/ACC2 Cup ChuckSM42/ACC3 Screw ChuckSM42/ACC4 Collet ChuckSM42/ACC5 Independent ChuckSM42/ACC6 Face Plate RH - Ø150mm

* Not suitable for SM1308 or SM1100


A 1 2 3

4 6

123456

Wood Turning Chisel Set 8pc

Long, two-handed softwood handles with tool steelshafts and tips. Suitable for use with Sealey SM1307,SM1308, SM900 and SM1100, as well as other brandsof wood lathe.

Contents: Skew Chisel 1/2”, Gouge 3/4”, Skew Chisel 1”,Parting Tool 3/16”, Gouge 1/4”, Point 1/2”, Gouge 1/2”,Round Nose 1/2”Length: 370mm

BModel No. AK60/8

B

Dust & Chip Extractors

Mobile workshop extractors suitable for attachment tomost static workshop machines including bandsaws,table saws, scroll saws, planers and sanders. Suppliedwith 2.5mtr of Ø100mm suction ducting.

Model No: SM48 SM46 SM47Airflow: 700cfm 600cfm 700cfmImpeller Size: 228mm 225mm 250mmIntake Ø: 100mm 100mm 125mmFlex Hose Ø: 100mm 100mm 100mmFlex Hose Length: 2.5mtr 2.5mtr 2.5mtrMotor Power: 746W 746W 1490WSupply: 230V 230V 230V


E

D

D E F

C

F-

Dust & Chip Extractor 1hp

Mobile economy dust extractor suitable for attachmentto most static workshop machines including bandsaws,table saws, scroll saws, planers and sanders.Contoured, textured handle to aid manoeuvrability .Supplied with dust collection bag, bag-clamp, BSapproved 3-pin plug and cable.

Airflow: 914cfmFan Ø: 152mmIntake Ø: 100mmMotor Power: 750W - 230V

CModel No. SM1309

5

InductionMotor

InductionMotor

InductionMotor

F

642 Section 18 Lathe Tools & Dust Extractors

B 1400W Ø185mm

Variable Speed Jigsaw 700Watt

Heavy-duty 700Watt electric motor with variable speedcontrol. Pendulum cutting action with a maximumcapacity cut of 85mm in wood. Tilting sole-plate allowscutting of bevels up to 45°. Supplied with width cuttinggauge, dust extraction outlet and fitted with 2.7mtrcable and BS approved plug.

Power: 700WSupply: 230V - 3AStroke Length: 19mmStrokes: 500-2800spmCutting Capacities:Wood: 85mmSteel: 6mmWeight: 2.6kg

EModel No. SJS700

E

700W

Variable Speed Electric HammerDrill 810Watt

Professional 810Watt hammer drill with variable speedand reverse controls. Suitable for driving and removingscrews. Hammer action allows up to 13mm capacity inmasonry. Features high quality chuck with soft griphandle and body for added comfort. Supplied withadjustable side handle, depth stop and 3mtr cable withBS approved plug.

Capacity: 13mmPower: 810WSupply: 230V - 2.6ANo Load Speed: 0-3000rpmHammer Action: 0-28000bpmDrilling Capacities:Wood: 25mmSteel: 13mmMasonry: 13mmWeight: 2.4kgKeyless Chuck (Optional): SD1000KC

CModel No. SD800

C 810W

1/4” Variable Speed Router1000Watt

Powerful 1000Watt motor delivers a variable speed of10000 to 30000rpm. Supplied with full accessories,including collet, copy follower , parallel guide andvacuum dust tube. Fitted with 3mtr cable and BSapproved plug.

Power: 1000WSupply: 230V - 4.4ANo Load Speed: 10000-30000rpmCollet Size (Metric): 6-8mmCollet Size (Imperial): 1/4”Plunge Depth: 44mmWeight: 3.2kg

FModel No. SR1000

F 1000W

Replacement Blades: Model No: Suitability: TPI: Pack Qty:SJS700B06 Wood 6 3SJS700B10 Wood 10 3SJS700B24 Wood/Soft Metal 24 3

Circular Saw 185mm 1400Watt

Powerful 1400Watt electric motor with soft start switch.Aluminium guard protects the 185mm TCT cutting bladethat has a capacity of up to 64mm in wood. Suppliedwith blade, width cutting gauge and dust extractionoutlet. Fitted with 2.6mtr cable and BS approved plug.

Power: 1400WSupply: 230V - 6ANo Load Speed: 5000rpmBlade Size: 185 x 2.8mmArbor: 20mmCapacity in Wood: 64mmWeight: 5.1kgReplacement Blade: SCS1400.78

BModel No. SCS1400

D

Cordless Screwdriver 4.8Vwith Pouch & Bits

Lightweight cordless power screwdriver with forwardand reverse both developing 2.5Nm of torque. Built-inLED work light to enhance vision in dark areas. Threecolour LEDs to indicate battery life. Supplied with 17 bits. Recharges in 3-5 hours.No Load Speed: 180rpmMaximum Torque: 2.5NmCharging Time: 3-5hrContents: Bits; Slotted - 3, 4, 5, 6, 7 x 24mm,TRX-Star* - T10, T15, T20 x 24mm, Phillips - #1, #2, #4 x 24mm, Slotted - 3, 4, 5, 6 x 50mm, Bit Adaptor, HSS Drill Bit 2mm, Cordless Screwdriver, Pouch

AModel No. CP48S

A

4.8V

18V

G

Electric Glue Gun

Composite housing with trigger feed. Fitted with 1.3mtrcable with BS approved 3 pin 230V non-rewirablefused plug. Includes two glue sticks.

GModel No. AK292

Cordless Hammer Drill/Driver 18V1hr Charge

Superbly balanced tool, intended for professional use.Features fifteen position torque control plus hammeraction, electronic variable speed control with reverseand 10mm keyless chuck. Ideal for both screw drivingand drilling. 1hr Charger with BS approved plug.Supplied in carry-case together with accessories.Variable Speed: 0-650rpmImpact Rate: 0-10400bpmDrilling Capacities:Wood: 16mmMetal: 10mmChuck Size: 10mmReplacement Battery: CB18VBPWeight Including Battery: 1.8kgAccessories:Drills; 1.5, 2.5, 3, 4, 5, 6mm, Screwdriver Bits; Slotted - 5, 6mm, Phillips - #1, #2, Pozi - #1, #2, Magnetic Bit Holder

DModel No. CP1801V

Section 18 Saws, Hammer Drills & Router 643

1 HourCharge

Titanium Coated Wood BoringBits/Hole-Saw Set 8pc - Metric

Flat wood boring bits and hole-saws for use with braceor slow running electric drill. Titanium coating on bitsreduces friction and heating for a faster , cleaner cut.Suitable for a variety of applications including door lockand wiring/heating installation.

Contents:Bits: 13, 19, 25mmHole-Saws: 32, 38, 45, 54mmHole-Saw Mandrel: 6mm Pilot

DModel No. AK4742M

D EMMMM

Router Bit Set 12pc 1/4” Shank

Deluxe assorted router bits with sturdy heads for longlife. Suitable for a wide variety of applications.Supplied in tiered storage case.Contents: Straight Bits; 6, 12, 16mm, Flush TrimBit; 12.7mm, 90° V Grooving Bit; 12.7mm, DovetailBit; 12.7mm, Roman Ogee Bit; R4mm, Core Box Bit; R6.3mm, Cove Bit; R6.3mm, Round Over Bits; R6.3mm, R9.5mm, 45° Chamfer Bit; 32mm,Hexagon Key

FModel No. AK9914

F

Wood Turning Chisel Set 8pc

Long, two-handed softwood handles with tool steelshafts and tips. Suitable for use with Sealey SM1307,SM1308, SM900 and SM1100, as well as other brandsof wood lathe.Contents: Skew Chisel 1/2”, Gouge 3/4”,Skew Chisel 1”, Parting Tool 3/16”, Gouge 1/4”,Point 1/2”, Gouge 1/2”, Round Nose 1/2”Length: 370mm

EModel No. AK60/8

G


Contour Gauge

Steel pins with spring loaded holder . Quickly gaugesprofiles. Integral Metric and Imperial rules. Suitable forflooring, tiling, woodworking and plumbing.

Maximum Profile Depth: 50mmMaximum Profile Length: 150mm

GModel No. AK63

A

B

Tenon Saw 250mm Comfort Grip Handle

Professional rigid back tenon saw with cross ground, hardpoint teeth for prolongedlife. Composite handle with comfort grip. Ideal for medium to thick wood.Blade Length: 250mmBlade Pitch: 12tpi

BModel No. AK8642

WORKBENCHES

We have a complete range of DIY &professional workbenches available.For full details see pages 406 to408 in our Storage & W orkstationsSection.

C

Hardpoint Hand Saw 550mm

Professional hand saw with straight ground, hardpoint teeth for prolonged life.Composite one-piece handle with 45° & 90° tri-square feature. Suitable for cutting arange of materials. Ideal for medium to thick wood.Blade Length: 550mmBlade Pitch: 7tpi

Model No. AK8644

A

Woodworking Bench with Drawer1.52mtr

Made from birchwood with a varnished finish. Features tool well, shelf, tool drawer,front and end vices, four metal bench stops and four wooden board jacks.Overall Dimensions (W x D x H): 1520 x 620 x 850mmWorktop: 1390 x 355mmTool Well: 1340 x 113mmDrawer: 330 x 320 x 75mmVice (x2): 280mm Wide x 190mm OpeningWeight: 27kg

CModel No. AP1520

Section 18 Woodworking Tools & Workbench644

Made in

Made in

Scratch Awl

Steel shaft runs through handle, fastened to bothplated steel ferrule and end-cap. Impact resistantwooden handle. Pointed tip to scribe, perforate orpunch wooden surfaces.

Shaft Length: 87mm

AModel No. AK6085

A CB

Flat Spoke Plane

Flat bottom, malleable steel body with epoxy finish.Carbon steel blade for work on flat or convex surfaces.Precise blade setting achieved with two adjustmentscrews. Raised handles for good clearance. Suitablefor professional and DIY carpentry.

Length: 254mmBlade Width: 55mm

FModel No. AK6091

F

Block Plane

Cast iron body with hardened carbon steel cutting blade.Fully adjustable for depth of cut, lateral and mouthadjustments for coarse and fine work. Lever , cam andscrew adjusted cutter head. Machined, recessed sidesfor firm grip. Suitable for professional and DIY carpentry.


GModel No. AK6092

G

Smoothing Plane

Machined, cast iron body with chrome plated pressureplate. Hardened, carbon steel blade with brass nut fordepth adjustment and lever for lateral adjustment.Wooden handle and knob for added comfort. Suitablefor professional and DIY carpentry.


HModel No. AK6093

H

E

Combination Square 300mm

High quality , adjustable, machined stainless steelblade with zinc alloy head. Head fitted with scriber ,level vial and brass locking screw . Permanentlymarked with Metric and Imperial graduations. Suitablefor carpenters and woodworking trades.

Length: 300mm

DModel No. AK6095

D

1

2

1

2

Marking Gauges

Polished, wooden stem and stock with brass lockingscrew. Pointed, hardened metal spur for scribing lineson wooden surfaces. Suitable for professional and DIYcarpentry.

Model No: AK6089 AK6090Maximum Scribing Reach: 150mm 230mmStock Dimensions (W x H): 70 x 30mm 55 x 26mm


1 2

Carpenter’s Try-Squares

Sturdy metal blade riveted to wooden stock to form aright angle. Brass edging on stock for increasedaccuracy and protection against damage. Strong stockdesign with hanging hole. Suitable for professional andDIY carpentry.

Model No: Blade Length:AK6086 150mmAK6087 230mm


12

Woodworking Measuring & Marking Set 6pc

Precision measuring and marking instrument set containing six essential tools for carpenters/craftsmen.

Contents: Sliding T-Bevel, Stainless Steel Rule, Precision Steel Square, Double-Ended Scriber , SquareHeaded Protractor/Depth Gauge, Compass with Pencil Holder

EModel No. AK6094

Section 18 Marking Tools & Planes 645

G-Clamps

Forged body with smooth acting threaded clamp.Fitted with swivel tip to reduce marking.

Model No: Length: Throat Depth:AK6002 50mm(2”) 25mm(1”)AK6003 75mm(3”) 38mm(1-1/4”)AK6004 100mm(4”) 50mm(2”)AK6006 150mm(6”) 68mm(2-5/8”)AK6008 200mm(8”) 84mm(3-5/16”)AK6010 250mm(10”) 90mm(3-1/2”)AK6012 300mm(12”) 95mm(3-3/4”)


Ratchet Clamp Sets 2pc

Ratchet clamps with 2-stage soft quick-release lever.Serrated jaws with pivoted tip pads (not AK6107).Contoured handles for comfortable application ofmaximum clamping force.

Model No: Tip/Jaw Capacity: Throat: Length:AK6106 45/55mm 70mm 170mmAK6107 65/70mm 105mm 240mmAK6108 50/90mm 75mm 215mmAK6109 70/85mm 105mm 240mm


D

Mini Spring Clamp Set 4pc

Powerful spring clamps with serrated jaws and pivotedtip pads. Textured handles for improved grip.

Tip Capacity: 60mmJaw Capacity: 55mmThroat: 65mmLength: 150mm

AModel No. AK6105

Quick Action Ratchet G-Clamps

Composite G-Clamps with ratchet action slide for quickand easy initial adjustment. Spring loaded handlerotates through 90° for fine clamping control. Resilientclamping faces minimise risk of workpiece damage.

Model No: Capacity: Throat:AK6111 50mm 45mmAK6112 75mm 65mmAK6113 100mm 85mm


C

Ratchet Bar Clamps

Ratchet action with comfort grip handle and quick-release button for fast adjustment. Fixed jaw may bereversed to allow use as a spreader . Resilientclamping faces and 63mm throat.

Model No: Capacity: Throat:AK6101 150mm 63mmAK6102 300mm 63mmAK6103 450mm 63mm


E

1234

1

2

3

4


BA

Quick Action

Quick Action Mitre Clamp70mm

Universal corner, mitre and drill press vice. Die-castbody with mounting plates. Quick action twin jaws forfast operation.


FModel No. CMV65Q

F

See page 595 for ourfull range of vices

Section 18 Clamps646

B

Sash Clamps Aluminiumwith Quick Action

Strong aluminium sash clamps with quick release lever for fast adjustment.Composite covered clamps help prevent damage to workpiece. Clamping force ofup to 300kg. Adjustable capacity from 0 to 20mm. Suitable for carpenters andcabinet-makers.

Model No: Length: Maximum Clamp Capacity:AK7224 600mm(24”) 500mm(20”)AK7236 900mm(36”) 790mm(31”)AK7248 1200mm(48”) 1000mm(39”)AK7260 1500mm(60”) 1410mm(56”)


A

Woodworking Bench Viceswith Quick Action

Heavy-duty cast jaw plate suitable for under bench mounting. Front face plate fittedwith plane-stop. Smooth acting lead screw with quick release lever allows fastpositioning of jaws around workpiece before final adjustment of clamp.

Model No: WV175 WV250Jaw Width: 175mm 255mmOpening: 280mm 305mmJaw Height: 82mm 110mmWeight: 9kg 17kg


D

Woodworking Bench Vices

Heavy-duty cast jaw plates suitable for under-bench mounting. Front face fitted withsmooth acting threaded clamps. Fully closed jaws meet to provide even clamping forceacross the whole depth of the workpiece. Suitable for carpenters and cabinet-makers.

Model No: WVE150 WVE175 WVE230Jaw Width: 150mm 175mm 230mmOpening: 120mm 160mm 200mmJaw Height: 50mm 60mm 80mmWeight: 2kg 3kg 6kg


C

E

F

MS130 can be set to these cutting angles: 90°, 45°, 36°, 30°, 22.5°, 15°

30° 22.5° 15°90° 45° 36°

120mm

Mitre Saw Blade

Precision steel blade for MS130 mitre saw. Our bladesfit most other leading brands of mitre saws.

Pitch: Size:14tpi 550 x 45mm

FModel No. MS130/12

Mitre Saw 120mm

Machined aluminium alloy table with Metric and Imperialgraduations. 120mm Capacity together with clamps, lengthgauge and positive angle location make this the first choicefor the craftsman or serious DIY user. Supplied with blade.

Maximum Cutting Height: 120mmMaximum Cutting Width at 45°: 105mmMaximum Cutting Width at 90°: 160mmBlade Length: 550mmBlade Width: 45mmAccessories: Work Vice, Length Gauge

EModel No. MS130

Quick Action

Quick Action

Sash Clamps

Forged clamp jaws with smooth acting threaded clamp. Pins fitted with chains tohelp prevent loss. Adjustable capacity from 0 to 50mm. Suitable for carpenters andcabinet-makers.Model No: Length: Maximum Clamp Capacity:AK6024 600mm(24”) 450mm(18”)AK6036 900mm(36”) 760mm(30”)AK6048 1200mm(48”) 1070mm(42”)AK6060 1500mm(60”) 1370mm(54”)AK6072 1800mm(72”) 1680mm(66”)AK6084 2100mm(84”) 1980mm(78”)


Section 18 Sash Clamps, Vices & Mitre Saw 647

C

ED

A

90kgCapacity

B

1200kgCapacity

80kgCapacity

130kgCapacity

Roller Stand 1 Roller90kg Capacity

Precision made, height adjustable, roller stand suitablefor woodworking applications. Aids material handlingand increases productivity. Roller fitted with smoothacting ball bearings.

Capacity: 90kgRoller Width: 400mmHeight Adjustment: 690-1180mmNumber of Rollers: 1Weight: 7.2kg

AModel No. RS5

Roller Ball Stand V-Type80kg Capacity

V-Groove design with eight ball bearings suitable forwoodworking applications. Angle adjustment aidsmaterial handling and increases productivity. Screw lockfor height adjustment. Tripod base for added stability.

Capacity: 80kgRoller Width: 200mmHeight Adjustment: 600-1110mmNumber of Ball Bearings: 8Weight: 5kg

CModel No. RS910V

Roller/Roller Ball Stand 2-in-160kg Capacity

2-in-1 Dual function, easy flip roller stand with one rowof five ball bearings and 390mm roller. Foot pedal lockoperation for height adjustment. Tripod legs for extrastability. Suitable for woodworking and workshopapplications, aids material handling and increasesproductivity.

Capacity: 60kgRoller Width: 390mmHeight Adjustment: 585-1000mmNumber of Rollers: 1Number of Ball Bearings: 5Weight: 9kg

DModel No. RS912C

60kgCapacity

2-in-1 Flip Head.

Adjustable angle head.

Adjustable Roller Stand 9 Rollers 450-1300mm 130kg Capacity

Heavy-duty roller stand suitable for woodworking and other workshop and warehouse applications. Adjustableheight and length to suit desired job also enables unit to be stored easily when not in use. Aids material handlingand increases productivity. Nine rollers fitted with smooth acting ball bearings. Mounted on braked castors.

Capacity: 130kgNumber of Rollers: 9Roller Width: 490mmHeight Adjustment: 640-1000mmLength Adjustment: 450-1300mm

EModel No. RS911F

Roller Stand 1 Roller1200kg Capacity

Heavy-duty workshop roller stand suitable for industrialapplications. Roller fitted with industrial quality ball racesfor smooth action. Improves handling of long or awkwardstock and helps increase both productivity and accuracy.

Capacity: 1200kgRoller Width: 300mmHeight Adjustment: 570-790mmNumber of Rollers: 1Weight: 12.5kg

BModel No. RS9

Section 18 Roller Stands648

B

Fold Down Trestles - Pair

Manufactured from pressed steel these trestles areideal for supporting large workpieces when cutting,drilling etc. Trestle tops include an anti-slip mat foradded workpiece stability. Fully collapsible for easystorage and transportation.Folded (W x D x H): 990 x 100 x 60mmUnfolded (W x D x H): 990 x 480 x 770mm

DModel No. FDT2

D

Folding Workbench

Hard wearing ply-top with pre-drilled jaw gripanchorages. Bench top additionally features vicecapability for gripping workpiece. Bench legs fold flat foreasy storage and incorporate tool storage slots. Suitablefor sawing, drilling, planing and sanding operations.

Dimensions: Folded: Unfolded:Width: 600mm 600mmDepth: 240mm 640mmHeight: 940mm 795mmClamp Capacity: 290mm

FModel No. FWB1

C

F

Fully Adjustable Mitre Saw Stand

Heavy-duty deluxe stand manufactured from square section steel tube. Features two adjustable extrusions forclamping mitre saw in position. Sliding arms extend from 1320 to 2100mm. Work support rollers with adjustableheight and swivel capability . Fitted with two wheels for added manoeuvrability . Legs fold flat for easytransportation and storage. Suitable for mounting most makes of mitre saw.

Capacity: 200kgRoller Width: 240mmHeight Adjustment: 990-1170mmWidth Adjustment: 1320-2100mmNumber of Rollers: 2Weight: 21.5kg

BModel No. RS15

A

Adjustable Mitre Saw Stand

Hard wearing, height adjustable wood-composite topsuitable for sawing, planing and sanding. Extendingtwin rollers aid material handling and increaseproductivity making it ideal for use with mitre saws andtable saws. Ribbed rubber feet for added stability. Legsand table fold flat for easy transportation and storage.Size Folded (W x D x H): 640 x 130 x 1010mmBoard Size (W x D x T): 585 x 480 x 18mmRoller Height Adjustment: 0-450mmRoller Extension: 690-1460mmHeight Adjustment: 690-880mm

AModel No. RS16

Fold Down TrestleAdjustable Legs

Pressed steel trestle top with durable coating forcorrosion resistance. Features an anti-slip mat andcarry handle. Adjustable legs manufactured fromsquare section steel tube, ideal for use on unevenground and steps. Ideal for supporting largeworkpieces when cutting, drilling etc. Fully collapsiblefor easy storage and transportation.Folded (W x D x H): 990 x 100 x 60mmUnfolded (W x D x H): 990 x 550* x 910*mmHeight Adjustment: 650-910mm* Maximum

EModel No. FTAL1

E

Adjustable height andangle rollers.

Support arms extended.

Folds flat for easy storageand handling.

Fold Down Telescopic Trestle100kg Capacity

Manufactured from square section steel tube this trestle isideal for supporting large/long workpieces when cutting,drilling etc. Trestle beam has seven-position heightadjustment and includes pivoted end stops to retain theworkpiece. Legs fold in for easy transportation and storage.Capacity: 100kgMinimum Beam Height: 810mmMaximum Beam Height: 1310mmBeam Width: 680mmWidth Between Stops: 650mmDepth Folded: 150mm

CModel No. FDT3

Section 18 Stands & Trestles 649

Section 19Material Handling651 Sack Trucks653 Platform Trucks654 Pallet Trucks655 Hydraulic Platform Trucks656 Safety Barriers657 Hoists & Winches658 Beam Clamps & Trolleys659 Chain Blocks & Lever Hoists660 Drum Handling

Folding Aluminium PlatformTruck 150kg Capacity

Lightweight frame design, weighs only 8.5kg yet has acarrying capacity of 150kg. Extending loading platformsits on four easy rolling, Ø100mm wheel (two fixedand two castors). Handle assembly retracts and foldsflat against platform for compact storage. Ideal forbusiness and home use.Capacity: 150kgLoad Area Folded: 420 x 420mmLoad Area Extended: 630 x 420mmHeight Folded: 220mmHeight Extended: 800mmWheels: Ø100mm

CModel No. CST981

C 150kgCapacity

B

100kgCapacity

CST980 folds down in justa few seconds and is compact enough to fit intothe boot of a small car .Ideal for delivery driversand couriers.

CST981 has acarrying capacity of150kg yet is lightenough to be handportable. Folds flat injust a few seconds.

A

Compact Folding AluminiumSack Truck 80kg Capacity

Lightweight aluminium and composite construction,weighs just 4.2kg. Truck folds down for easy storageand transport, yet unfolds to carry up to 80kg whenrequired. Fitted with large, easy-rolling rubber wheels.Rubber grip handle for added comfort and control.

Capacity: 80kgFolded Size: 700 x 460 x 60mmUnfolded Size: 1000 x 460 x 420mm

AModel No. ST33

Compact Folding AluminiumSack Truck 100kg Capacity

Lightweight aluminium frame, weighs only 7kg yet hasa carrying capacity of 100kg. Folding steel foot plateand telescopic handle with spring release means thattrolley can be packed away in seconds. Large backsupport makes light work of oversized loads. Fittedwith Ø150mm wheels for easy rolling over roughground. Ideal for business and home use.Capacity: 100kgHeight Folded: 720mmHeight Extended: 1090mmWidth: 380mmFootplate Width: 355mmFootplate Depth: 240mmWheels: Ø150mm

BModel No. CST980

Sack Truck 3-in-1Pneumatic Tyres 250kg Capacity

Tubular steel framework with heavy-duty pneumatictyres allows transport of load over rough terrain.Suitable for use as a traditional sack truck or at 45° withsupport castors in position. For maximum load carryingcapability use in horizontal position. Features fold outload restrainer for use when truck is in horizontalposition. Adapts between configurations in seconds.

Capacity: 250kgWheel: Ø250mmWheel Thickness: 75mmHeight: 1275mmWidth: 600mmPlatform Depth: 300/620mm

DModel No. CST989

D 250kgCapacity

3-in-1

D D

Stair Climbing Sack TruckSolid Tyres 150kg Capacity

Tubular steel construction gives 150kg maximum loadcapacity. Deep foot ensures cartons stay on trolley duringtransit. Fitted with solid rubber wheels. Handle designallows a firm grip whilst ascending and descendingstairways. Ideal for delivery drivers and couriers. Suitablealso for multi-level factories and offices.Capacity: 150kgWheels: Ø165mmWheel Thickness: 30mmHeight: 1300mmWidth: 510mmPlatform Depth: 230mm

Model No. CST985

E

150kgCapacity

SolidTyres

EE

Extremely lightweightST33 folds downquickly for easystorage in car boot.

Heavy-DutyPneumatic

Wheels

80kgCapacity

Section 19 Sack Trucks 651

A B 200kgCapacity

C

FoldawayToe Plate

FoldawayToe Plate

Models CST990 and CST989 fitted with a foldawaytoe plate which increases the loading area.

F

D

F

250kgCapacity

D E 300kgCapacity

GG

2-in-1

250kgCapacity

Sack Truck - 150kg CapacitySolid Tyres

Strong tubular steel construction with welded joints.Heavy-duty wheels feature steel inserts for addedstrength and durability. Can be rested on handles forflat loading. Fitted with rubber handgrips.

Model No. CST983

A

Sack Truck 2-in-1Pneumatic Tyres 250kg Capacity

Tubular steel framework with heavy-duty pneumaticwheels. Use as a traditional sack truck or in ahorizontal position. Quick and easy conversionbetween different configurations.Capacity: 250kgWheels: Ø250mmWheel Thickness: 88mmHeight: 1450mmWidth: 550mmPlatform Depth: 180mm

Model No. CST978

G

150kgCapacity

SolidTyres

Sack TrucksPneumatic Tyres

Extra strong tubular steel frame construction. Steelcentred pneumatic wheels allow transport over theroughest terrain. Range features CST988 model with‘P’ handle, high back and flat loading capabilities.Models CST986, CST987, CST990, CST994 includerubber handgrips. Additionally CST990 featuresextra foldaway toe plate for added extension whentransporting larger loads. Ideal for delivery drivers,farmers or builders.

Model No. SEE TABLE

B F-

Model No: CST983 CST986 CST987 CST988 CST994 CST990Capacity: 150kg 200kg 200kg 250kg 300kg 250kgWheel: Ø210mm Ø250mm Ø250mm Ø250mm Ø250mm Ø260mmWheel Thickness: 50mm 90mm 90mm 90mm 90mm 88mmHeight: 1170mm 1100mm 1190mm 1260mm 1100mm 1249mmWidth: 460mm 550mm 545mm 560mm 520mm 650mmPlatform Depth: 220mm 180mm 255mm 220mm 250mm 325/620mm

A B C D E F

250kgCapacity

200kgCapacity

Heavy-DutyPneumatic

Wheels

Heavy-DutyPneumatic

Wheels

Heavy-DutyPneumatic

Wheels

Heavy-DutyPneumatic

Wheels

Heavy-DutyPneumatic

Wheels

Heavy-DutyPneumatic

Wheels

CST988 Features ‘P’ handle design.

Section 19 Sack Trucks652

AA

B C

Platform Trucks with4 Removable Panels

Welded construction with 15mm wood compositeplatform and four removable wire mesh panels.Two fixed wheels and two braked castors for easymanoeuvring and safe loading and unloading. Ideal forwarehouse and industrial applications.

Model No: CST772 CST773Capacity: 300kg 300kgPlatform Size: 1000 x 700mm 1200 x 800mmPlatform Height: 280mm 280mmSide Height: 590mm 590mmOverall Width: 700mm 800mmOverall Length: 1220mm 1420mmOverall Height: 1150mm 1150mmWheel Size: Ø200 x 50mm Ø200 x 50mm


200kgCapacity

300kgCapacity

300kgCapacity

Platform Truck with SidesPneumatic Tyres 200kg Capacity

Heavy-duty steel with hinged mesh construction.Cushioned grip pull handle with smooth steering actionfor easy manoeuvrability . Steel centred pneumaticwheels allow transport over the toughest terrain. Drop-down sides, for easy loading, are also removable,allowing use as a flatbed for oversized items. Suitablefor a variety of warehouse, office, garden and domestichauling applications.Capacity: 200kgTyre Size: Ø250 x 90mmPlatform Height: 350mmInternal Size:Length: 930mmWidth: 480mmDepth: 220mmOverall Height: 570mm

AModel No. CST997

Platform Trucks

Rigid platform trucks feature rubberised deck andbumper strip on CST991 and CST992 and heavy-dutywooden deck and tubular steel bumper on CST993.Handles on CST991 and CST992 fold flat for easeof storage. CST993 Handle detaches completely .Suitable for a variety of warehouse, of fice anddomestic applications.

Model No: CST991 CST992 CST993Capacity: 150kg 300kg 250kgWheel: Ø100mm Ø125mm Ø125mmDeck Length: 738mm 916mm 949mmDeck Width: 479mm 616mm 496mmDeck Height: 140mm 209mm 226mmOverall Height: 815mm 863mm 961mm

Model No. SEE BELOW

D F-

D E F

E 300kgCapacity

150kgCapacity

D F 250kgCapacity

Platform Trucks with3 Removable Panels

Welded construction with 15mm wood compositeplatform and three removable wire mesh panels. Twofixed wheels and two braked castors for easymanoeuvring and safe loading and unloading. Ideal forwarehouse and industrial applications.

Model No: CST770 CST771Capacity: 300kg 300kgPlatform Size: 1000 x 700mm 1200 x 800mmPlatform Height: 280mm 280mmSide Height: 590mm 590mmOverall Width: 700mm 800mmOverall Length: 1220mm 1420mmOverall Height: 1150mm 1150mmWheel Size: Ø200 x 50mm Ø200 x 50mm

Model No. SEE BELOW

B

Heavy-DutyPneumatic

Wheels

Section 19 Platform Trucks 653

Pallet Truck with Scales2000kg 1150 x 570mm

Heavy-duty pallet truck suitable for warehouse and general handling duties.Features built-in weighing scales with an accuracy of ±1kg. Six-digit, high contrastLCD display. Control panel has a Tare function to allow for packaging weight. Scalespowered by four AA batteries allowing up to 70 hours of use. Automatic sleep modeensures battery life is prolonged when not in use. Ergonomic handle for comfortableoperation.Capacity: 2000kgMinimum Height: 88mmMaximum Height: 200mmForks (Length x Overall Width): 1150 x 570mmFork Spread: 200mmDisplay: Six-digit LCDWeighing Units: Pounds, KilogramsPower: 4 x AA Cells

Model No: PT1150LD PT1150 PT1220Capacity: 1680kg 2000kg 2000kgMinimum Height: 75mm 85mm 85mmMaximum Height: 190mm 193mm 193mmForks (Length x Overall Width): 1150 x 520mm 1150 x 550mm 1220 x 685mmFork Spread: 220mm 230mm 365mm

Pallet Trucks

Heavy-duty trucks suitable for warehouse and generalhandling duties. Polyurethane, non-marking wheelswith sealed-for-life bearings all-round. Hydraulic unitswith chromed ram piston for resistance to corrosion.Single bogey wheels with drop nose for smooth palletentry on PT1 150 & PT1220. Tandem loading rollerswith sealed-for-life bearings on PT1150LD.

Pallet Truck 1000kg1170 x 540mm High Lift

Heavy-duty high lift pallet truck suitable for the loading/unloading of light commercialvehicles as well as warehouse/general handling duties. Features twin stabilisersfor extra balance when at maximum lift and an ergonomic handle design forcomfortable operation.

Capacity: 1000kgMinimum Height: 85mmMaximum Height: 800mmForks (Length x Overall Width): 1170 x 540mmFork Spread: 225mm

DModel No. PT1170H

D

A

Model No. SEE BELOW

EModel No. PT1150SC

E

C

2000kgCapacity

2000kgCapacity

1680kgCapacity

2000kgCapacity

B

1000kgCapacity

HighLift

A C-

A B C

Section 19 Pallet Trucks654

A B

Hydraulic Platform Truck400kg Capacity High Lift

Heavy-duty construction. High lift version with1350mm maximum platform height. Fitted with fourcomposite wheels, two fixed and two locking castorsfor easy rolling over rough workshop and warehousefloors. One-piece hydraulic unit controlled by large rearmounted foot pedal. Safety release mechanismpositioned on handlebar for smooth controlleddescent. Suitable for numerous garage, industrial andwarehouse handling applications. Supplied with non-slip platform cover for added load security . May alsobe used as a mobile service bench.

Capacity: 400kgMinimum Platform Height: 360mmMaximum Platform Height: 1350mmPlatform Length: 910mmPlatform Width: 500mmWheel Ø: 125mm

FModel No. HPT400H

F

C

D

300kgCapacity

150kgCapacity

750kgCapacity

Hydraulic Platform Trucks

Heavy-duty construction. All models fitted with fourcomposite wheels, two fixed and two locking castors,for easy rolling over rough workshop and warehousefloors. One-piece hydraulic unit controlled by large rearmounted foot pedal. Safety release mechanismpositioned on handlebar for smooth controlleddescent. All models except HTP500 feature safetybars to prevent inadvertent lowering. Suitable fornumerous garage, industrial and warehouse handlingapplications. Models HPT150 - HPT500 supplied withnon-slip platform cover for added load security . Mayalso be used as a mobile service bench.

Model No: HPT150 HPT300 HPT500 HPT750 HPT1000Capacity: 150kg 300kg 500kg 750kg 1000kgMinimum Platform Height: 225mm 270mm 280mm 420mm 430mmMaximum Platform Height: 700mm 770mm 860mm 900mm 1020mmPlatform Length: 705mm 820mm 815mm 1000mm 1015mmPlatform Width: 450mm 520mm 500mm 510mm 510mmWheel Ø: 100mm 125mm 125mm 147mm 150mm

Model No. SEE TABLE

400kgCapacity High

Lift

A B C D E

500kgCapacity

E 1000kgCapacity

A E-

MOTORCYCLE & QUAD LIFTS

See pages 177 to 180for our full range ofMotorcycle, Quad andTractor Lifts.

Section 19 Hydraulic Platform Trucks 655

Centre & Corner Posts

Heavy-duty centre and corner posts to be used withguard rails. Supplied with floor bolts and rail fixings.

Model No: Type: Section: Height:SR55P Centre 100 x 100mm 475mmSR59P Centre 100 x 100mm 1075mmSR56CP Corner 100 x 100mm 475mmSR60CP Corner 100 x 100mm 1075mm

Guard Rails

Heavy-duty guard rails designed for internal or external use. Ideal for sectioning of f specific areaswhere machinery, buildings or of fices are prone to collision damage. Bright colour highlights these hazards, which may otherwise blend in. The rangeconsists of various length guard rails to be used withcentre or corner posts.

Model No: Length:SR50 500mmSR51 1100mmSR52 1725mm

Model No. SEE BELOW


B E-

BCDE

AVAILABLE IN 3 LENGTHS500mm - 1725mm

A

F

F

B C D E

Centre Posts Corner Posts

Safety Bollard 900mm

Ideal for restricting access to certain areas. Bollardsare hollow to minimise collision damage, but can befilled with concrete if required.

Section: Ø105mmHeight: 900mm

FModel No. SR61B

Parking Barrier - 3 Leg

Heavy-duty parking barrier manufactured fromØ35mm tube steel. Supplied with padlock and twokeys. All parts galvanized or zinc plated for corrosionresistance. For full security, we suggest you drill outthe screw head after installation.Minimum Height: 50mmMaximum Height: 400mmWidth: 755mmThese barriers are also suitable for restricting accessto certain areas in warehouses, workshops etc.

HModel No. PB296

H

Parking Barrier - Single Post

Manufactured from 50mm tube and 4mm wall thicknesssquare section steel, our extra-heavy-duty single postparking barrier is fitted with integral lock. All partsgalvanized or zinc plated for corrosion resistance. Allinstructions and fixings for installation included. Locationscrews are Torx® headed to prevent theft. For full security,we suggest you drill out the screw head after installation.Minimum Height: 65mmMaximum Height: 600mmWidth: 50mm

GModel No. PB197

G

Section 19 Safety Barriers656

Power Hoist 250kg Capacity

Approved to EC and UK Lifting Gear Regulations. Testcertificate included. This hoist is intended for usewhere a suitable support facility exists. Supportbrackets are included with the equipment. The supportbar is not included.

Capacity (Single Cable): 125kgCapacity (Double Cable): 250kgLift Height (Single Cable): 11mtrLift Height (Double Cable): 5.5mtrFull Lift Time (Maximum): 1minuteWeight: 12kgMotor Power: 560W - 230V

AModel No. PH250

A

DoubleLine Pull

SingleLine Pull

125kg

250kg

Power Hoist 400kg Capacity

Approved to EU and UK Lifting Gear Regulations. Testcertificate included. This hoist is intended for usewhere a suitable support facility exists. Supportbrackets are included with the equipment. The supportbar is not included.

Capacity (Single Cable): 200kgCapacity (Double Cable): 400kgLift Height (Single Cable): 11mtrLift Height (Double Cable): 5.5mtrFull Lift Time (Maximum): 1minuteWeight: 17kgMotor Power: 900W - 230V

BModel No. PH400

DoubleLine Pull

SingleLine Pull

200kg

400kg

Geared Winch 540kg Capacity

Hardened steel gears with heavy plate chassis.Suitable for general and recovery operations.Features a fully enclosed gearbox.

Capacity: 540kgHand Force First Layer: 11kgHand Force Third Layer: 7kgGear Ratio: 4.1:1Hub: Ø50mmHandle Length: 210mmUnit Weight: 3.3kg

Model No. GWE1200

Recovery Winches

Suitable for direct vehicle mounting as well as truckand trailer bed mounting, these high speed winchesoffer a combination of performance with durability. Thecompact design allows mounting in areas where spaceis at a premium.Check out the features:


D

RECOVERY WINCHESModel GWE1200 can be used for 'on-vehicle'recovery applications but more usually , anelectric winch is installed. For details ofour range of recovery winches, beacons,recovery wear and towing products, pleaserefer to the Recovery & Towing section.See pages 210 to 224.

C

See page 217 in the Recovery & Towing section for full specifications.

C

Heavy-duty, all-weather housing. High power DC motors give first class

pulling power. All steel, lubricated for life, gear-train for

smooth and quiet operation. Includes dynamic and mechanical drum

brake for safe and controlled operation. Remote control allows power in and power

out of cable from a safe distance. Drum clutch allows free spooling of cable. High quality wire rope fed through 4-way

roller fairlead for smooth and even distribution of cable onto drum.

Supplied with automatic resetting circuit breaker and hand-saver bar.

B

Hand Power Pullers

These hand operated devices are perfect for movingvehicles, logs, machines and other heavy objects.Vehicles must be in a condition capable of acting as arolling load within the rated capacity . Each winch isdelivered ready for use with cable already installed. Allmodels fitted with ratchet safety devices. ModelsHP1300 and HP1500 are equipped with double ratchetsafety device and double ratcheting mechanism forapplying the load evenly and with minimum effort. Sideframes are manufactured in one piece from bestquality steel and zinc chrome plated for long termcorrosion resistance. Perfect for marine, industrial andautomotive applications.

See page 215 in the Recovery & Towing section for full specifications.

Model No. SEE BELOW

E

E

1000kg

1300kg

1500kg

540kg

Section 19 Hoists & Winches 657

Model No: Capacity: Test Load: Track Width Minimum CurveAdjustable Radius:

Range:

PT500 500kg 750kg 62-128mm 800mm

PT1000 1000kg 1500kg 62-128mm 1000mmPT1000GPT2000 2000kg 3000kg 88-154mm 1300mmPT2000GPT3000 3000kg 4500kg 87-153mm 1500mmPT3000G

Min - Max Max DistanceI-Beam Between Spans:

Dimensions(D x W x Web):

125x 75x 5.5mm 3000mm250x 25x 7.5mm 8000mm125x 75x 5.5mm 2500mm250x125x 7.5mm 6000mm180x100x 6.0mm 3000mm350x150x 9.0mm 9000mm200x100x 7.0mm 2700mm850x150x 9.0mm 4500mm

Measurements Weight(mm): (kg):

A B C D E244 106 106 64 98 5.4

266 113 113 70.5 106 7.8266 180 113 70.5 106 11.7292 136 136 79.5 132 12.6292 186 136 79.5 132 17.1344 152 152 96.5 150 19.8344 191 152 96.5 150 24.3

Beam Clamps

Suitable for semi-permanent attachment to steelbeams and acts as a lifting point for chain blocks,hoists and lifting tackle. The clamp may also be usedfor lifting and transfer of steel beams and as a pullingclamp. Low profile af forded by integral pivot/liftingpoint. HSE Test Certificate included.

AModel No. SEE TABLE

Model No: BC1000 BC2000 BC3000 BC5000Capacity: 1000kg 2000kg 3000kg 5000kgA: 75-210mm 75-210mm 75-305mm 75-305mmB: 182-328mm 182-328mm 214-460mm 214-460mmC: 77mm 85mm 107mm 121mmD: 26mm 26mm 35mm 35mmE: 190mm 190mm 240mm 240mmF: 144-117mm 144-117mm 224-179mm 220-175mmG: 52-38mm 52-38mm 58-40mm 58-40mmJ: Ø20mm Ø20mm Ø22mm Ø28mmK: 34mm 34mm 42mm 45mmWeight: 4.5kg 5.2kg 9.1kg 10.7kg

A

A

Beam Clamp - Dimensions

Plain Block Trolleys - Dimensions

Geared Block Trolleys - Dimensions

Plain & Geared Block Trolleys

Suitable for use with our lever hoists or chain blocks.Designed for mounting onto an I-beam or RSJ to allowload to be manoeuvred sideways. Incorporates wheelguards to prevent contact with other trolleys mountedon same load bearer. HSE Test Certificate included.

BModel No. SEE TABLE

B

B

A BD

EC

A B

DE

C

1

1 2

3 4

2 3 4

Geared

Plain

IMPORTANT SAFETY INFORMATIONAlways ensure that the load to be slung does not exceed the rated capacity of the equipment beingused. Also ensure that the structure to which the trolley or winch is attached meets or exceeds thesafety parameters which are specified by the HSE.Do not allow the load to swing during operation anddo not subject winches, pulleys, beam clamps andstraps to shock loads.

Note: Suffix G on Model No. denotes geared version.

Section 19 Beam Clamps & Trolleys658

Chain Blocks

Tested and certified to HSE specifications. Fitted withheat treated and ground, triple-spur geared shaft andpinion. Also includes mechanical load brake for extrasafety. All chains are manufactured from hardenedalloy material and load hooks feature safety latches.Compact gear housing allows use where headroom islimited.

Model No: CB500 CB1000 CB2000 CB3000 CB5000Safe Working Load: 500kg 1000kg 2000kg 3000kg 5000kgTest Load: 625kg 1250kg 2500kg 3750kg 6250kgStandard Lift: 2.5mtr 2.5mtr 2.5mtr 3.0mtr 3.0mtrLoad Chain Diameter: 5.0mm 6.0mm 6.0mm 7.1mm 10.0mmPulling Effort: 27kg 28kg 30kg 38kg 42kgHead Room: 295mm 330mm 470mm 530mm 588mmOverall Width: 110mm 130mm 130mm 147mm 173mmOverall Depth: 120mm 147mm 147mm 179mm 216mmHook Aperture: 30mm 35mm 41mm 47mm 52mmMaximum Hook Capacity Ø: 35mm 42mm 50mm 60mm 65mmWeight: 7.0kg 10.5kg 15.5kg 23.5kg 39.0kg


A

Lever Hoists

Rugged construction features drop-forged and heattreated pinion gear with totally enclosed mechanism.Models equipped with heavy-duty brake and highquality alloy steel chain for durable and safe operation.Free-chaining feature permits slack in the load chainto be taken up by hand before engaging the ratchetarm. HSE Test Certificate included.

CModel No. SEE RIGHT

Model No: LH750 LH1000 LH1500 LH3000Capacity: 750kg 1000kg 1500kg 3000kgTest Load: 1125kg 1500kg 2250kg 4500kgPull on Lever to Lift Full Load: 22kg 29kg 26kg 38kgLoad Chain Ø: 6.3mm 6.3mm 7.1mm 10mmChain Falls: 1 1 1 1Chain Length: 1.5mtr 1.5mtr 1.5mtr 1.5mtrOverall Depth: 128mm 128mm 154mm 182mmLever Length: 240mm 240mm 360mm 360mmHead Room: 275mm 295mm 320mm 400mmOverall Width: 158mm 158mm 172mm 195mmOperating Clearance: 99mm 99mm 104mm 108mmHook Aperture: 26mm 30mm 34mm 38mmMaximum Hook Capacity Ø: 30mm 34mm 38mm 43mmWeight: 7.4kg 7.7kg 10.8kg 18.9kg

1

1

1 2 3 4

1 2 3 4

2 3 4 5

2 3 4 5

A

C

C

Pulley Blocks

Ideal for moving heavy objects. The wire rope (notsupplied) is easily fitted via a hinged section of sideplate. Pulley sheave runs on maintenance-free bushes.Suitable for industrial and automotive applications.Model No: Working Test Wire Rope

Capacity: Load: Thickness:PB1000 1000kg 1500kg 7mmPB2000 2000kg 3000kg 13mmPB3000 3000kg 4500kg 15mm


B

For full details of our Load Sling Adjuster please see page 172.

500kg

Section 19 Chain Blocks & Lever Hoists 659

Hydraulic Drum Loader 205ltr

Ideal for loading and unloading barrel bunds, vans andgeneral drum handling when forklift is not available.Suitable for 205ltr drums. Foot operated hydraulics,side handles and smooth-rolling wheels aid handlingand manoeuvrability.Maximum Drum Height: 1610mmLeg Height: 65mmLeg Length: 590mmWidth Inside Legs: 700mmMaximum Width: 800mmOverall Maximum Height: 1950mmOverall Minimum Height: 1710mmWeight: 67kg

Drum Grab 350kg Capacity

Lifts open or closed, loaded, steel drums with the aid ofan overhead hoist. Keeps drum in vertical positionreducing spillage. Heavy-duty steel construction.Suitable for use with 205ltr drums.

Capacity: 350kgDrum Size: 205ltrWeight: 9kg

Forklift Single Drum Clamp205ltr

Simple mechanical feature allows drums to be pickedup, relocated and released without leaving the drivingposition. Secures tightly to forklift arms using handscrews. Heavy-duty steel construction. Suitable for usewith 205ltr drums.

Capacity: 680kgFork Opening: 623mmDrum Size: 205ltrWeight: 55kg

Hydraulic Drum Truck 205ltr

Less manual effort required as hydraulic ram clampsdrum, then raises it of f the ground for simplemanoeuvring and relocation. Cradle is fitted with twosmooth-rolling, heavy-duty wheels and one castor withbrake. Suitable for 205ltr drums.

Lifting Height: 335mmWidth: 780mmDrum Size: 205ltrWeight: 42kg

EModel No. DH03

DModel No. DH01

BModel No. DG02

AModel No. DG01

E

D

B

A

Drum & Barrel Trolley

Rigid steel construction suitable for safe movementand storage of steel and plastic barrels. Cradle fittedwith two, smooth-rolling, heavy-duty, Ø150mm wheelsand one Ø75mm castor . Two-position handle locksupright or at 45° and features tools for five dif ferentdrum caps and a metal drum tilting attachment.

CModel No. TP13

C

E

A

B

F GLocking Zinc Die-Cast Drum Tap

Zinc die-cast, push-pull tap with locking facility toprevent unauthorised access to drum contents. Nitrileseals, suitable for most liquids normally stored inplastic and steel drums. 3/4”BSP Thread.

GModel No. TP121

Locking Drum Tap

Polythene constructed tap with 3/4”BSP thread andneoprene washer.

FModel No. TP12

Section 19 Drum Handling660

Hydraulic

Hydraulic

Drum Dolly 205ltr

Transport drums quickly and safely on large diametercastors. Fitted with one locking castor . Suitable for205ltr drums.

AModel No. TP10

Drum Stillage

Allows safe storage of 205ltr drums in the horizontalposition for quick dispensing of contents. Radiusedframe helps up-end drums.

DModel No. TP11

D

Mobile Drum Stillage

Allows safe storage of 205ltr drums in the horizontalposition for quick dispensing of contents. Radiusedframe helps up-end drums. Highly manoeuvrable ontwo heavy-duty rubber tyres and two castors. Fittedwith rubber handgrip.

EModel No. TP112

E

Heavy-Duty Drum HandlingTrolley

Tubular steel construction with heavy-duty solid rubbertyres. Simple to use, slip the loading lip under the drumand rock the drum over. The curve of the frame allowsthe drum to roll the trolley onto its wheels ready fortransit. Drum can be secured using chain supplied.Fitted with rubber handgrips.

FModel No. ST30

F

HEAVY DUTY

Mobile Drum Handler205ltr

Ideal for manoeuvring, relocating and draining fullyloaded drums. Lever handle raises drum in stages withfingertip-operated locks. Adjustable for reach/leverageand clamp height. Clips on both sides hold drumsecurely in vertical or horizontal positions. Drum canbe manually adjusted and held at any angle or , ifcontents need mixing, can be turned end-over-end.Fitted with two smooth-rolling, heavy-duty wheels andone castor with brake. Suitable for 205ltr drums.

Drum Size: 205ltrWeight: 50kg

CModel No. DH02

C

C

A

E

Drum Dolly 205ltr

Transport drums quickly and safely on large diametercastors. Wheels are strategically positioned for evenweight distribution enabling easier manoeuvrability .Suitable for 205ltr drums.


B B

Section 19 Drum Handling 661

Section 20Environmental & Janitorial663 Electric Heaters664 Paraffin/Diesel Heaters667 Propane/Infrared Heaters668 Propane Heaters670 Electric/Infrared Heaters672 Desk & Tower Fans673 Pedestal Fans, Dehumidifiers

& Air Cooler674 Industrial Fans676 Blowers & Ventilators677 Water Hoses678 Pressure Washers & Accessories682 Cleaning Brushes, Cloths & Sponges684 Brooms, Shovel & Mops685 Workshop Matting686 Industrial Vacuum Cleaners690 Vacuum Cleaners & Valeting Machines692 Submersible Pond Pumps693 Submersible Pumps694 Ladders697 Platforms & Ladders

699 Kick-Steps & Mobile Safety Steps

700 Cigarette/Litter Bins701 Vehicle Locks/Clamps

& Parking Barriers702 Cycle Carriers, Stand & Racks704 Tarpaulins705 Car, Caravan & Motorcycle

Covers

Fan Heater 2000W 2 HeatSettings with Thermostat

Tough composite case with integral carry handle. Canbe seated in a vertical or horizontal position. Two-position heat settings, control two 1000W attheating elements. Full range ambient room thermostatmaintains temperature at pre-set level. Fan doubles ascool air blower for use in the summer . Full CEapproval. Supplied with 13Amp non-rewirable ASTAapproved plug.Power: 1000/2000WSupply: 230VSize (W x D x H): 248 x 238 x 120mmWeight: 1.4kg

Oil-Filled Electric Radiators with Thermostat

Oil-filled radiators suitable for of fice, home, showroom and workshop use. Manufactured to rigorous safetystandards and supplied fitted with a 13Amp BS approved plug. Features full thermostatic heat control whichcuts power to the heater elements when pre-set temperature is attained. Elements designed to maximise areaof the heated surface in order to transfer more heat to the atmosphere. Fitted with castors for added mobility .

Model No: RD1500 RD2500Power: 1500W 2500WSupply: 230V 230VSize (W x D x H): 360 x 220 x 640mm 520 x 230 x 640mmWeight: 10kg 15kg

Model No. SEE BELOW

E F

E F-

Convector Heaters 2000W 3 Heat Settings with Thermostat

Contemporary styled convector heaters with three heat settings of 750/1250/2000W for gradual control ofheating elements. Rotary controlled room thermostat maintains ambient temperature at pre-set level. ModelNo. CD2005T with built-in turbo fan for accelerated heating. Both models can be used freestanding or wallmounted. Slimline sturdy construction and high quality finish make these units suitable for home, light industrialand office environments. Supplied with 13Amp non-rewirable ASTA approved plug and wall mounting kit.

Model No: CD2005 CD2005TPower Settings: 750/1250/2000W 750/1250/2000WSupply: 230V 230VSize (W x D x H inc. feet): 200 x 670 x 485mm 200 x 670 x 485mmWeight: 4kg 4.1kg

Model No. SEE BELOW

B

A B-

A

Turbo Fan2000W

2000W

1500W 2500W

E F

A B

CModel No. New FH2008

C

D

2000W

2000W

Fan Heater 2000W 2 HeatSettings with Thermostat

Tough metal casing with composite integral carryhandle. Two-position heat settings control two1000Watt heating elements. Full range ambient roomthermostat maintains temperature at pre-set level. Fandoubles as cool air blower for use in the summer. FullCE approval. Supplied with 13Amp non-rewirable BSapproved plug.Power: 1000/2000WSupply: 230VSize (W x D x H): 258 x 240 x 95mmWeight: 1.5kg

DModel No. New FH2009

F

Section 20 Electric Heaters 663

Space Warmer Paraffin/Diesel Heaters

Our range of paraffin/diesel heaters represents excellent value. Workshop tried and tested. The range includes two economy portable models, the AB458 and AB708 which areboth supplied without wheels. All models except the AB358S and AB458 have an adjustable thermostat (°C) that controls unit as desired temperature is reached. Model No.AB1008 and above are fitted with digital room temperature (°C) display, spare parts storage compartment and heavy-duty pneumatic wheels. Proven pump systems handleeither paraffin or diesel with only minor adjustment of air compressor. All models are fitted with fuel tank gauge and heavy-duty filler cap.

Model No. New SEE TABLE

C D

A H-

A B

Fuel TankGauge

Heavy-Duty Fuel Cap

Fuel TankGauge

Fuel Pressure

Gauge

Heavy-Duty Fuel Cap

AdjustableThermostat

Fuel TankGauge

Fuel Pressure

Gauge

Heavy-Duty Fuel Cap


Heavy-DutyPneumatic

Wheels

Fuel TankGauge

Fuel Pressure

Gauge

Heavy-Duty Fuel Cap

UltraQuiet

65dB

Built-In Thermostat*

Built-In Air Pressure Gauge

OversizedFuel Cap

Fuel Gauge

Easy-OpenHinged Top

Easy-Lift Handle

Easy-LiftHandles

Heavy-DutyPneumatic

Wheels

Spare PartsStorage System*

(located on back of unit)Built-In

Thermostat

Built-In Air Pressure

Gauge

Error Code

Readout*

OversizedFuel Cap

Fuel GaugeEasy-OpenHinged Top

*Not featured on Model No. AB7081*Not featured on Model No. AB358S and AB458

38k Btu/Hr 45k Btu/Hr


PARAFFIN DIESEL PARAFFIN DIESEL


Section 20 Paraffin/Diesel Heaters664

Section 20 Paraffin/Diesel Heaters 665


Heavy-DutyPneumatic

Wheels

Fuel TankGauge

Fuel Pressure

Gauge

Error CodeRead-out

Heavy-Duty Fuel Cap


Heavy-DutyPneumatic

Wheels

Fuel TankGauge

Fuel Pressure

Gauge

Error CodeRead-out

Heavy-Duty Fuel Cap


Heavy-DutyPneumatic

Wheels

Fuel TankGauge

Fuel Pressure

Gauge

Error CodeRead-out

Heavy-Duty Fuel Cap


Heavy-DutyPneumatic

Wheels

Fuel TankGauge

Fuel Pressure

Gauge

Error CodeRead-out

Heavy-Duty Fuel Cap


Heavy-DutyPneumatic

Wheels

Fuel TankGauge

Fuel Pressure

Gauge

Error CodeRead-out

Heavy-Duty Fuel Cap

E F

G H

Model No: AB358S AB458 AB7081 AB708Output: 11.1kW 13.2kW 20.5kW 20.5kWOutput: 38,000Btu/hr 45,000Btu/hr 70,000Btu/hr 70,000Btu/hrTank Capacity: 11ltr 19ltr 19ltr 19ltrFuel Oil: Paraffin/Diesel Paraffin/Diesel Paraffin/Diesel Paraffn/DieselSupply: 230V - 5A 230V - 5A 230V - 5A 230V - 5ARunning Time per Filling (Approx.): 10hr 14hr 9hr 9hrTransport Wheels: Air Flow: 98cfm 170cfm 240cfm 240cfmAutomatic Shut-Off: Heated Area: 9,500ft3 11,250ft3 17,500ft3 17,500ft3

Heated Area: 269mtr3 319mtr3 496mtr3 496mtr3

Net Weight: 10.5kg 12.7kg 12.7kg 12.7kgGross Weight: 12.7kg 15kg 15kg 15kg

Model No: AB1008 AB1258 AB1758 AB2158Output: 29.3kW 36.6kW 51.3kW 63kWOutput: 100,000Btu/hr 125,000Btu/hr 175,000Btu/hr 215,000Btu/hrTank Capacity: 38ltr 38ltr 49ltr 49ltrFuel Oil: Paraffin/Diesel Paraffin/Diesel Paraffin/Diesel Paraffin/DieselSupply: 230V - 5A 230V - 5A 230V - 5A 230V - 5ARunning Time per Filling (Approx.): 11hr 10hr 9.5hr 8hrTransport Wheels: Air Flow: 520cfm 540cfm 630cfm 670cfmAutomatic Shut-Off: Heated Area: 25,000ft3 31,250ft3 43,750ft3 53,750ft3

Heated Area: 708mtr3 885mtr3 1,239mtr3 1,522mtr3

Net Weight: 24.5kg 24.5kg 27.7kg 29kgGross Weight: 27.1kg 27.1kg 30.8kg 32.2kg

A B C D

E F G H



Offers easy manoeuvrabilityacross smooth and rough terrain.

Easy checking thatworking pressureis at the correct level and helps any adjustment to be accurate.

Ensures work area can be kept at a constant comfortable temperature.

Allows fastidentification ofany errors, whichcan be translatedon the unitsinformation plate.

Held on by a metal chain which can help prevent accidental loss.

Helps keep an eye on the fuel level easily without having to remove the fuel cap.



Section 20 Paraffin/Diesel Heaters666

Space Warmer Paraffin/DieselHeaters with Chimney

Paraffin/diesel heaters with low-fume heat output.Specially constructed stainless steel combustionchamber is vertically vented through a flue,dramatically reducing the amount of fume emittedthrough the hot air nozzle of the heater. Fully specifiedwith safety cut-out and incorporating a fuel filter forclean, reliable operation. May be controlled by optionalremote thermostat, Model No.ABT04.

Model No. SEE TABLEC D

Model No: AB502 AB902Output: 14.5kW 26.5kWOutput: 50,000Btu/hr 90,000Btu/hrEfficiency: 84.4% 80%Flue Diameter: 120mm 140mmTank Capacity: 30ltr 46ltrFuel Oil: Paraffin/Diesel Paraffin/DieselSupply: 230V 230VRunning Time per Filling (Approx.): 25hr 18hrTransport Wheels: Airflow: 380cfm 530cfmAutomatic Shut-Off: Heated Area: 12,500ft³ 17,865ft³Heated Area: 355mtr³ 525mtr³Net Weight: 35kg 40kgShipping Weight: 37kg 42kgOptional Remote Thermostat: ABT04 ABT04

Remote Heater Thermostat

Thermostat with a setting range of 5°-30°C and on/offswitch gives complete control over remotely positionedheater. Supplied with 10mtr cable and plug for directconnection to heater.

Setting Range: 5°-30°CCable Length: 10mtrApplication: AB502, AB902

EModel No. ABT04

E

C D-


C D

B

DIESELInfrared Paraffin/Diesel Heater 18kW/230V

Infrared heater suitable for well ventilated indoor applications. Clean burning unitoperates on paraffin or diesel. Unit produces an impressive 60,000 Btu/hr. 11ltr Tankallows approximately 6.5hrs running time, making this unit extremely economical.Complies with rigorous standards and is fitted with a safety cut-out.

Output: 18kWOutput: 60,000Btu/hrTank Capacity: 11ltrFuel Oil: Paraffin/DieselSupply: 230V - 5ARunning Time per Filling (approx): 6.5hrTransport Wheels: Air Flow: 59cfmAutomatic Shut Off: Heated Area: 15,000ft³Heated Area: 425mtr³Net Weight: 14.1kgGross Weight: 15.9kg

AModel No. New IR18

A 60k Btu/Hr 130k Btu/Hr

Infrared Diesel Heater 38kW/230V

Diesel fuelled infrared heater for indoor (well ventilated) and outdoor applications.Combustion gases are catalysed so the heater requires no flue or exhaust pipe.Integral fuel tank and large wheels make the unit fully manoeuvrable. Tank capacity is51 litres, giving approx. 14 hours operation per fill. Stainless steel combustion chambermay be adjusted, in the vertical plane, through 40° to direct the heat as required.Output: 38kWOutput: 130,000Btu/hrTank Capacity: 51ltrFuel: DieselSupply: 230VRunning Time per Filling (approx): 14hrFuel Consumption: 3.0kg/hrDimensions:Minimum/Maximum Height: 915/1115mmWidth: 640mmLength: 955mm

BModel No. IR40

PARAFFIN DIESEL


D

Infrared Propane TowerSpace Heaters 12.5kW

Innovative design of radiant heater uses propane gascylinder to power an infrared burner unit. The radiantheat which is produced heats only surfaces which itfalls on and is relatively unaf fected by air movement.This unit produces a pleasant, heated working/relaxingenvironment over approximately 20-25mtr² and is idealfor use in open workshops, boat yards, forecourts,gardens, terraces and swimming pool areas. Theburner head is positioned approximately 2mtr of f theground and the metal shade directs radiationdownwards and outwards. The heat output is fullyadjustable using a control valve on the burner head.Features a fully enclosed gas cylinder chamber . Aswith all heaters utilising burner heads, this productshould only be used in a well ventilated area.

Model No: LP352 LP352SFuel: Propane (15kg) Propane (15kg)Output: 12.5kW 12.5kWReflector Diameter: 815mm 815mmIgnition: Piezoelectric PiezoelectricHeight: 2240mm 2240mmWeight (Excluding Cylinder): 17kg 17kg

Model No. SEE BELOWE

D E-

12.5kW 12.5kW

D E

Space Warmer Propane Heater9,200-17,000Btu/hr

Ceramic plaque type heater . Mounts on the rim of apropane cylinder . Adjustable output from 9,200 to17,000Btu/hr. Supplied with 700mm of hose and fixedregulator. DVGW Approved. Gas bottle not included.

Fuel: PropaneOutput: 9,200-17,000Btu/hrFuel Consumption: 0.216-0.400kg/hr

AModel No. LP13

A 17k Btu/Hr

Space Warmer Propane Heater9,200-17,000Btu/hr with Stand

Ceramic plaque type heater . Adjustable, steel tubestand with built-in handle. Heat output from 9,200 to17,000Btu/hr. Supplied with 1.5mtr hose and regulator.DVGW Approved. Gas cylinder not included.Fuel: PropaneOutput: 9,200-17,000Btu/hrFuel Consumption: 0.216-0.400kg/hr

BModel No. LP14

B

Halogen Patio Heater2100W/230V

Stylish design made from aluminium with weightedbase to help prevent toppling. Three settings from900W to 2100W give controlled heat output. Producesa pleasant relaxing heat and is ideal for use in openworkshops, boat yards, forecourts, gardens andterraces. The heater element is situated approximately2mtr off the ground and the aluminium shade directsthe heat downwards and outwards. Supplied with 5mtrcable and BS approved 3-pin plug.

Power Settings: 900/1200/2100W Supply: 230VHeight: 2100mmCable Length: 5mtrWeight: 15kg

CModel No. EPH2100

FLOODLIGHTSWe stock a full range of walland floor mounted floodlights.Model MD520C is fitted with a PIR sensor which automatically switches uniton when approached by vehicles or persons.See pages 436 to 438 formore details.

A

17k Btu/Hr

LP13 clamps ontothe rim of a propanecylinder.

Will use gas left incylinder when pressureis too low to run bigger heaters.

2.1kW

230V

C

PROPANE PROPANE

PROPANE PROPANE

Section 20 Propane/Infrared Heaters 667

Section 20 Propane Heaters668

A

A B C D E F

B

Model No: LP351 LP451 LP601 LP351S LP451S LP601SOutput (Propane): 10.0kW 12.0kW 14.9kW 10.0kW 12.0kW 14.9kWOutput (EN 1596): 10.9kW 13.2kW 16.5kW 10.9kW 13.2kW 16.5kWOutput (Propane): 34,000Btu/hr 40,900Btu/hr 51,000Btu/hr 34,000Btu/hr 40,900Btu/hr 51,000Btu/hrOutput (EN 1596): 37,190Btu/hr 45,040Btu/hr 56,300Btu/hr 37,190Btu/hr 45,040Btu/hr 56,300Btu/hrAirflow: 500mtr³/hr 500mtr³/hr 500mtr³/hr 500mtr³/hr 500mtr³/hr 500mtr³/hrFuel Consumption: 0.70kg/hr 0.85kg/hr 1.06kg/hr 0.70kg/hr 0.85kg/hr 1.06kg/hrSupply: 230V 230V 230V 230V 230V 230VLength: 340mm 390mm 390mm 340mm 390mm 390mmWidth: 215mm 215mm 215mm 215mm 215mm 215mmHeight: 320mm 320mm 320mm 320mm 320mm 320mmFuel: Propane Propane Propane Propane Propane PropaneHeated Area: 8,600ft³ 10,300ft³ 12,800ft³ 8,600ft³ 10,300ft³ 12,800ft³Heated Area: 244mtr³ 292mtr³ 362mtr³ 244mtr³ 292mtr³ 362mtr³

C

D E F

34k Btu/Hr

34k Btu/Hr

40k Btu/Hr

40k Btu/Hr

51k Btu/Hr

51k Btu/Hr

PROPANE

PROPANE PROPANE PROPANE

PROPANE PROPANE

Space Warmer PropaneHeaters

Many users have found the advantages of propaneheaters far outweigh the small additional runningcosts. The fuel is more completely burned and doesnot leave an oily residue as experienced with paraffinheaters. There is no odour , except for the fewseconds during start-up and the units run a little morequietly since they do not need a compressor to drivethe fuel to the burner . Available with a durable paintfinish or with a stainless steel body for improvedcorrosion resistance and more stylish appearance.

Heaters are fan assisted, fitted with a piezoelectricignition system for trouble-free starting and supplied withan approved propane gas regulator and hose. All modelsare tested and certified to CE/EN standards by DVGW.

A F-Model No. SEE BELOW

Space Warmer Propane Heaters

Many users have found the advantages of propane heaters far outweigh the smalladditional running costs. The fuel is more completely burned and does not leave anoily residue as experienced with paraffin heaters. There is no odour, except for thefew seconds during start-up and the units run a little more quietly since they do notneed a compressor to drive the fuel to the burner.

All propane heaters are fan assisted, are fitted with a piezoelectric ignition systemfor trouble-free starting and are supplied with a propane gas regulator. All heatersare tested and certified to CE standards by the German DVGW test house and aresafe for use in the UK. All regulators are Calor approved.

A

Model No: LP70 LP100 LP145 LP200 LP300Output (Propane): 17.5kW 12.5-31.2kW 26.6-43.5kW 28.1-58.5kW 37.7-82.2kWOutput (EN1596): 19.0kW 15.0-39.0kW 33.24-54.53kW 34.5-77.0kW 46.5-102.2kWOutput (Propane): 59,710Btu/hr 42,000-106,400Btu/hr 90,000-148,500Btu/hr 96,500-200,000Btu/hr 130,000-280,500Btu/hrOutput (EN1596): 64,830Btu/hr 51,000-131,800Btu/hr 113,000-186,000Btu/hr 118,700-263,000Btu/hr 160,000-348,900Btu/hrAirflow: 300mtr³/hr 750mtr³/hr 850mtr³/hr 1800mtr³/hr 2450mtr³/hrFuel Consumption: 1.35kg/hr 1.0-2.46kg/hr 2.09-3.41kg/hr 2.12-4.64kg/hr 2.82-6.50kg/hrSupply: 230V 110/230V 110/230V 110/230V 110/230VLength: 450mm 530mm 690mm 780mm 925mmWidth: 220mm 280mm 280mm 370mm 370mmHeight: 285mm 400mm 400mm 520mm 520mmFuel: Propane Propane Propane Propane PropaneHeated Area: 17,500ft³ 26,000ft³ 37,000ft³ 50,000ft³ 70,000ft³Heated Area: 496mtr³ 736mtr³ 1,048mtr³ 1,416mtr³ 1,982mtr³

Figures quoted for EN output are according to EN1596 which uses a Butane test gas to enable technical comparison of space heate rs. All our space heaters aremanufactured to BS4096 and to DIN3067 and are distributed under the Sealey quality assurance scheme.

B DC E

59k Btu/Hr

148k Btu/HrC

A E-Model No. SEE BELOW

A

PROPANE

PROPANE

B 106k Btu/Hr

D 200k Btu/Hr

E 280k Btu/Hr

PROPANE

PROPANE

PROPANE

Section 20 Propane Heaters 669

Infrared Cabinet Heater1500/3000W 230V

Powder coated metal cabinet with two quartz infraredelements and chemically polished reflectors for maximum heat emission. Controllable power outputby rocker switches on the side of the cabinet. Featureseasy-rolling castors with two locking castors fitted tothe rear. Suitable for a wide range of heating includingrestorative applications. Supplied with cable andBS/ASTA approved plug.

Maximum Power: 3000WMinimum Power: 1500WSupply: 230V - 13ADimensions (W x D x H): 560 x 490 x 885mm

DModel No. IRC153

D E

CB

Industrial Fan Heaters

Electric fan heaters for industrial applications. Selectable heat settings with thermostat control, plus fan only. A totally dry heat with no condensation, no gas, no fumes,so no smell. Ideal for workshops, garages etc. EH2000 and EH3000 supplied with power cable and 3-pin plug. EH3300 supplied with power cable.

Model No: EH2000 EH3000 EH3300Maximum Power: 2000W 3000W 3300WHeat Settings: 650/1300/2000W 1500/3000W 1650/3300WSupply: 230V - 13A 230V - 13A 230V - 30ADimensions (W x D x H): 197 x 210 x 313mm 280 x 400 x 300mm 250 x 250 x 398mm

Model No. SEE BELOW

A

A C-

A B C

Infrared Heater1500/3000W 230V

Powder coated metal construction with tilting head giving directional heat control. Fitted with two quartz infrared elements and chemically polished reflectorsfor maximum heat emission. Controllable power output by rocker switches on the rear of the head assembly. Stand features easy-rolling castors with alocking castor fitted to the rear . Suitable for a widerange of heating including restorative applications.Supplied with cable and BS/ASTA approved plug.

Maximum Power: 3000WMinimum Power: 1500WSupply: 230V - 13ADimensions (W x D x H): 600 x 620 x 815mm

EModel No. IRS153

3000W 3000W

2000W 3000W 3300W

EH3000 features thermostat control and selectable heat settings.

B

Section 20 Electric/Infrared Heaters670

C

Infrared Quartz Heater1500W/230V Tripod Mounted

Electric, tripod mounted, heater with infrared quartzlamp. Reaches maximum heat output within seconds ofbeing turned on. Supplied with power cable and 3-pinplug. A totally dry heat with no condensation, no gas, nofumes and no smell. Ideal for workshops, bars,forecourts or gardens and terraces (if weather-protected).

Power: 1500WSupply: 230V - 13AHeight Adjustment: 0.6-1.6mtr

AModel No. LP1500

A

1500W

3000W

Infrared Quartz Heater3000W/230V Tripod Mounted

Electric, tripod mounted, heater with infrared quartzlamps. Reaches maximum heat output within secondsof being turned on. Supplied with power cable and 3-pinplug. A totally dry heat with no condensation, no gas, nofumes and no smell. Ideal for workshops, bars,forecourts or gardens and terraces (if weather protected).

Maximum Power: 3000WMinimum Power: 1500WSupply: 230V - 13AHeight Adjustment: 0.8-1.7mtr

EModel No. LP3000

Infrared Quartz HeatersWall Mounting

Electric heaters with infrared quartz lamps. Suitable for indoor wall or overhead mounting. Reaches maximumheat output within seconds of being turned on. Supplied with one metre power cable (not IWMH4500) andmounting brackets. A totally dry heat with no condensation, no gas, no fumes and no smell. Ideal for workshops,warehouses and garages.

Model No: IWMH1500 IWMH3000 IWMH4500Power: 1500W 3000W 4500WSupply: 230V - 13A 230V - 13A 230V - 30ADimensions (W x D x H): 405 x 75 x 185mm 405 x 75 x 340mm 405 x 75 x 495mmMounting Bracket Stand-Off: 265mm 265mm 265mmMinimum Mounting Height: 2.2mtr 2.2mtr 3.0mtr

Model No. SEE BELOW

F H-

F G H

E

Infrared Quartz Heater2000W/230V Wall Mounting

A totally dry heat, no condensation, no gas, no fumes andno smell. Reaches maximum heat output within seconds of being turned on. Highly polished aluminiumreflector for maximum heat efficiency. Adjusts horizontallythrough 25° while mounted. Three settings, controlled bypull chain, allow unit to be on full, half or low power. Idealfor industrial or domestic applications. Suitable for indoorand outdoor use, if weather protected.Power: 2000WSupply: 230V - 13ADimensions (W x D x H): 485 x 170 x 250mm

CModel No. IWMH2003

Infrared Quartz Heater2000W/230V

A totally dry heat, no condensation, no gas, no fumesand no smell. Reaches maximum heat output withinseconds of being turned on. Adjustable height from1320mm to 2100mm. Head swivels 45° from verticaland rotates 360°. Three heat settings controlled bypull chain. Ideal for industrial or domestic applications.

Power: 2000WSupply: 230V - 13AHeight Adjustment: 1.3-2.1mtr

BModel No. PQH2000

B

2000W

2000W

F

G H

1500W

3000W

4500W

Infrared Quartz Heater 2000W/230V Wall Mounting Remote Control

A totally dry heat, no condensation, no gas, no fumesand no smell. Reaches maximum heat output withinseconds of being turned on. Highly polished aluminiumreflector for maximum heat ef ficiency. Adjustshorizontally through 25° while mounted. Threesettings, controlled by push on/of f switch or remotecontrol, allowing unit to be on full, half or low power .Ideal for industrial or domestic applications. Suitablefor indoor and outdoor use, if weather protected.Power: 2000WInput Supply: 230V - 13ADimensions (W x D x H): 485 x 170 x 250mm

D

Model No. New IWMH2003RC

D

2000W

Section 20 Infrared Heaters 671

A B

Oscillating Desk Fans

Feature tilt and swivel heads for optimum air circulation. Push button controls and fully guarded fan blades toBS5060/IEC879 for ease of use and extra safety. Smooth running motor powers both fan blades and oscillatinggearbox for even air distribution.

Model No. SEE BELOWF

C

AModel No: SDF9W SDF12W SDF16WFan Diameter: 225mm(9”) 300mm(12”) 400mm(16”)Speeds: 2 3 3Maximum Airflow: 30mtr³/min 40mtr³/min 68mtr³/minPower: 30W 40W 40WSupply: 230V 230V 230VHeight: 380mm 540mm 580mm

B C

A C-

9” 12” 16”

29”

Wall Fan 3-Speed 16” withRemote Control

Features tilt and swivel head for optimum air circulation.Remote control operation and fully guarded fan bladesto BS5060/IEC879 for ease of use and extra safety .Smooth running motor powers both fan blades andhead oscillation. Timer function allows user to presetrunning time between 30 minutes - 7.5 hours. Featuresthree modes - Normal, Nature and Sleep. Nature modefor alternating high and low air flows. Sleep mode forgradual reduction of fan speed. Supplied with wallbracket for quick and easy installation.Fan Diameter: 400mm(16”)Speeds: 3Modes: Normal, Nature, SleepMaximum Airflow: 68mtr³/minPower: 40WSupply: 230VHeight: 530mm

DModel No. SWF16WR

D

D

Clip-On Fan 2-Speed 7”

Clip-on fan featuring tilt and swivel head for optimumair circulation. Switch control and fully guarded fanblades to BS5060/IEC879 for ease of use and extrasafety. Smooth running motor powers fan blades.

Fan Diameter: 178mm(7”)Speeds: 2Maximum Airflow: 14mtr³/minPower: 20WSupply: 230VHeight: 360mm

EModel No. SCF7W

E

Oscillating Tower Fan 29”

Slimline fan design suitable for floor or desktopoperation. Three-speed push button control with two-hour timer. Smooth running motor powers fan bladesand oscillating gearbox to aid even air distribution.Speeds: 3Power: 50WSupply: 230VHeight: 760mm

FModel No. STF29T

F

16” 7”

Section 20 Desk & Tower Fans672

A

16”B

Dehumidifier 20ltr

Compact, efficient, portable unit that extracts up to 20litres of water per day. Removes excess moisture fromair to prevent build-up of mildew and mould. Features2, 4, 8 hour timer, auto-defrost function and adjustableair outlet. W ashable activated carbon air filter .Refrigerant is environmentally friendly R134A. May beconnected to a drain hose for continuous operation.Power: 400WSupply: 230VDehumidifying Capacity: 20ltr/dayWorking Space: 20-30mtr²Maximum Airflow: 180mtr³/hrRefrigerant: R134ACondensate Tank: 4.5ltr (with auto shut-off)Working Temperature Range: 5-35°CWeight: 13kg

CModel No. SDH20

C

Air Cooler/Heater/Purifier& Humidifier Unit

Multifunction 4-in-1 unit comprising air cooler, heater,humidifier and air purifier . Features 3-speed fan,adjustable airflow direction and timer. Refrigerant-freecooling by evaporating water, which can be enhancedby adding ice to the built-in ice drawer . Fan-assistedheating function with two settings. Air purification isachieved by negative ion generation and an activatedcarbon filter. Supplied with electronic remote control.Mounted on castors for manoeuvrability.Cooler: 70WHeater: 1000W/2000WSupply: 230VAnion Density: 2 million/cm³Maximum Airflow: 200mtr³/hrCooling Water Tank: 11ltrWeight: 9kg

EModel No. SAC41

16”

Pedestal Fan 3-Speed 16”Push-Button

Features tilt and swivel head for optimum aircirculation. Push-button controls and fully guarded fanblades to BS5060/IEC879 for ease of use and extrasafety. Smooth running motor powers both fan bladesand head oscillation.

Fan Diameter: 400mm(16”)Speeds: 3Maximum Airflow: 68mtr³/minPower: 40WSupply: 230VHeight Adjustment: 1090-1390mm

Model No. SPF16W

A

Pedestal Fan 3-Speed 16” withRemote Control

Features tilt and swivel head for optimum aircirculation. Touch pad/remote control operation andfully guarded fan blades to BS5060/IEC879 for ease ofuse and extra safety . Smooth running motor powersboth fan blades and electronically operated oscillatinggearbox for even air distribution. Timer function allowsuser to preset running time between 30 minutes and7.5 hours. Features three modes - Normal, Nature andSleep. Nature mode for alternate strong and weakintensities of circulating air . Sleep mode for gradualreduction in intensity of circulating air.

Fan Diameter: 400mm(16”)Speeds: 3Modes: Normal, Nature, SleepMaximum Airflow: 68mtr³/minPower: 40WSupply: 230VHeight Adjustment: 1090-1390mm

BModel No. SPF16WR

E

Industrial Dehumidifiers

Powerful dehumidification capacity. Removes excessmoisture from air , preventing build-up of mildewand mould. Features auto-defrost function, whichactivates if the room temperature falls too low .Washable activated carbon air filter . Refrigerant isenvironmentally friendly R407C. May be connected toa drain hose for continuous operation. Mounted oncastors for manoeuvrability.Model No: SDH30 SDH50Power: 750W 900WSupply: 230V 230VDehumidifying Capacity: 30ltr/day 50ltr/dayWorking Space: 30-40m² 50-70m²Maximum Airflow: 300mtr²/hr 350mtr²/hrRefrigerant: R407C R407CCondensate Tank: 5ltr (with auto shut-off)Working Temperature Range: 5-32°C 5-32°CWeight: 28kg 30kg


D

Section 20 Pedestal Fans, Dehumidifiers & Air Cooler 673

Industrial High VelocityFans 230V

High velocity fans suitable for movement of hugevolumes of air. Carefully balanced and fully guardedblades provide quiet and safe operation. Three-speedpower selection and cradle stand allow precise controlof airflow to exactly where it is needed. Fitted withBS approved plug. Suitable for use in industrial,commercial, agricultural, automotive workshop andshowroom applications.

Model No: HVF16 HVF18Fan Diameter: 400mm(16”) 450mm(18”)Speeds: 3 3Power: 80W 90WSupply: 230V 230V

A B-

Industrial High Velocity Pedestal Fans 230V

High velocity pedestal fans suitable for movement of huge volumes of air. Carefully balanced and fully guardedblades provide quiet and safe operation. Three-speed power selection. Spring-assisted, height-adjustable standand switchable head oscillation allow precise control of air flow to exactly where it is needed. Suitable for use inindustrial, commercial, agricultural, automotive workshop and showroom applications.

Model No: HVSF24 HVSF30Fan Diameter: 610mm(24”) 760mm(30”)Speeds: 3 3Speed Range: 900/1120/1310rpm 740/820/920rpmMaximum Airflow: 220mtr³/min (7789cfm) 227mtr³/min (8013cfm)Height: 1570-1990mm 1610-2030mmPower: 220W 170WSupply: 230V 230V

Model No. SEE BELOW

D

D E-

D E

E

Industrial High Velocity PedestalFan 18” 230V

High velocity pedestal fan suitable for movement ofhuge volumes of air . Carefully balanced and fullyguarded blades provide quiet and safe operation.Three-speed power selection and height-adjustablestand allow precise control of air flow to exactlywhere it is needed. Fitted with BS approved plug.Suitable for use in industrial, commercial, agricultural,automotive workshop and showroom applications.

Fan Diameter: 450mm(18”)Speeds: 3Height: 1240-1450mmPower: 90WSupply: 230V

CModel No. HVSF18

C

Model No. SEE BELOWB

18”

24” 30”

18”

Both HVSF24 and HVSF30supplied with pull cord speedand on/of f selection pluspush/pull switch for oscillationof head.

A B

A

16”

Section 20 Industrial Fans674

C

A B

Industrial High VelocityDrum Fan 36” 230V

High velocity industrial two-speed drum fan suitable for movement of huge volumes of air . Robust unitwith heavy-duty steel casing, guard and frame. Wheels and handle for easy manoeuvrability . Carefullybalanced and fully guarded blades provide quiet andsafe operation. Suitable for use in industrial,commercial, agricultural, automotive workshop andshowroom applications.

Fan Diameter: 915mm(36”)Speeds: 2Speed Range: 735/940rpmMaximum Airflow: 258mtr³/min (9095cfm)Power: 260WSupply: 230V

CModel No. HVD36

24” 30”

36”

Industrial High Velocity Drum Fan 30” 230V

High velocity industrial three-speed drum fan suitablefor movement of huge volumes of air. Robust unit withheavy-duty gauge steel casing, guard and frame. Mobile unit allows control of airflow to exactly whereit is needed. Carefully balanced and fully guardedblades provide quiet and safe operation. Fitted withBS approved plug. Suitable for use in industrial,commercial, agricultural, automotive workshop andshowroom applications.

Fan Diameter: 760mm(30”)Speeds: 3Speed Range: 650-950rpmMaximum Airflow: 230mtr³/minPower: 190-350W Supply: 230V

Model No. HVD30

B

Industrial High VelocityDrum Fan 24” 230V

High velocity industrial three-speed drum fan suitablefor movement of huge volumes of air. Robust unit withheavy-duty gauge steel casing, guard and tiltingframe. Mobile unit allows control of airflow to exactlywhere it is needed. Carefully balanced and fully guarded blades provide quiet and safe operation. Fitted with BS approved plug. Suitable for usein industrial, commercial, agricultural, automotiveworkshop and showroom applications.

Fan Diameter: 610mm(24”)Speeds: 3Speed Range: 900-1100rpmMaximum Airflow: 173mtr³/minPower: 210-280WSupply: 230V

Model No. HVD24

A

Air Conditioning/Dehumidifier &Heater Unit 9,000Btu/hr

Thermostatically controlled unit with extendable exhausthose and window kit - ideal for home or office. Features3-speed fan, condensate tank with ‘Full’ alarm andelectronic remote control. Air conditioning temperaturerange 16-35°C. Unit also has heating and dehumidifyingfunctions. Refrigerant is environmentally friendlyR407C. Mounted on castors for manoeuvrability.

Cooling Capacity: 9000Btu/hrHeater: 1600WSupply: 230VMaximum Airflow: 360mtr³/hrMaximum Water Extraction Rate: 1.8ltr/hrThermostat Range: 16-35°CRefrigerant: R407CCondensate Tank: 2ltr (with alarm)Exhaust Hose Length: 1.8mtrEnergy Class: C

DModel No. SAC9000

D

Section 20 Industrial Fans 675

Section 20 Blowers & Ventilators676

A

Air Dryers/Blowers 230V

Robust, composite housing, carefully balanced and fully guarded blade drum provide quiet and safe operation.Housing design provides three outlet positions from horizontal to vertical, allowing precise direction of airflow forcooling or drying. Handle incorporates cable storage. Suitable for use in industrial, commercial, agricultural andautomotive workshops.

Model No: ADB300 ADB3000Speeds: 1275rpm 940/1210/1370rpmMaximum Airflow: 10mtr³/min (356cfm) 81mtr³/min (2860cfm)Power: 96W 1130WSupply: 230V 230VWeight: 3.7kg 10.2kg

Model No. SEE BELOW

A B-

Portable Ventilators with Ducting

Ideal for use where high volume air delivery is required. Especially suitable for ventilating confined, hot or fumeladen work sites, typically found in boats, cable/pipe ducts, roof spaces etc. Lightweight and robust constructiongive the portability and durability necessary in the work place. Fitted with carry handle, 2.4mtr cable and ASTA/BSapproved plug. Supplied with 5mtr ducting.

Model No: VEN200 VEN300Power: 180W 520WSupply: 230V 230VFan Diameter: 200mm 300mmFan Speed: 2800rpm 2800rpmAirflow: 25mtr³/min 60mtr³/minStatic Pressure: 2.4mbar 3.4mbarWeight (without ducting): 7.4kg 11.7kgReplacement Ducting (5mtr): VEN200AK1 VEN300AK1Optional Ducting (10mtr): VEN200AK2 VEN300AK2

Model No. SEE BELOW

D

E

D E-

D E

VEN200 & VEN300 supplied with 5mtr flexible ducting

Flexible Ducting

Model No: Application: Size Ø: Length:VEN200AK1 VEN200 200mm 5mtrVEN300AK1 VEN300 300mm 5mtrVEN200AK2 VEN200 200mm 10mtrVEN300AK2 VEN300 300mm 10mtr


C

A B

B Position 1

Position 2

Position 3

350cfm 2860cfm

200mm

300mm

A

Water Hose Reel 15mtr

Ideal accessory for any pressure washer. Consists of15mtr of water hose, wall mounting bracket, spraynozzle and tap connection. Can be used mobile orpermanently installed.Length: 15mtrSize Ø: 13mm

BModel No. WR92

B

Retractable Garden Hose Reel 20mtr

Durable, UV resistant composite case with wall mounting bracket. Built-in selflubricating belt for smooth rewind. Fitted with 20mtr Ø12mm PVC garden hose withspray/jet nozzle. Supplied with 2mtr leader hose with quick coupler and tapconnector. Positive latching mechanism automatically locks hose at desired length.

Length: 20mtrSize Ø: 12mm

EModel No. RWH15

E

Retractable Water Hose Reel Heavy-Duty 18mtr

Heavy-duty, durable composite case with carry handle. Fitted with 18mtr Ø12mmPVC hose with spray/jet nozzle. Heavy-duty ratchet mechanism enables safestorage and use. Wall mounting brackets included.

Length: 18mtrSize Ø: 12mm

FModel No. RGH18

F

Hand Cranked Hose Reel80mtr Capacity

Heavy-duty steel open style construction with mountingbracket for fixing to wall or floor . Suitable for industrialapplications or areas where longer length of hose isrequired. Will hold up to 80mtr (260ft) of Ø13mm hose.Screw operated drum lock.Hose Capacity: 80mtr x Ø13mmInlet/Outlet: 13mmMaximum Pressure: 300psi (20bar)Weight: 10kg

CModel No. GH80

CAvailable in:15mtr30mtr80mtr

20mtr 18mtr

15mtr 80mtrCapacity

Water Hoses with Nozzle

Fitted with spray/jet nozzle and universal tapconnector. Reinforced green PVC hoses with Ø13mmbore. GH15R/12 Features auto shut-of f connector .Model No: Length: Size Ø:GH15R/12 15mtr 13mmGH30R 30mtr 13mmGH80R 80mtr 13mm


Lay-Flat Water Hoses 10mtr

High quality PVC hose reinforced with synthetic fibres.Suitable for water discharge only.Model No: Length: Size Ø:LFH1025 10mtr 25mmLFH1032 10mtr 32mmLFH1038 10mtr 38mm


D 10mtr

WATER PUMPSFor our full range of Water Pumpsfor clean and dirty water see page693.

HEAVY DUTY

Section 20 Water Hoses 677

2950psi Pressure Washer withTSS & Rotablast Nozzle®

Heavy-duty unit supplied with trolley to hold all hoses.Pump unit fitted with high pressure by-pass to preservepump life. Features Automatic Total Stop System(TSS) which switches the motor on and of f when thelance trigger is operated, prolonging the motor life.Supplied with hose, trigger, rotating brush, adjustablenozzle and Rotablast Nozzle® which helps develop thesame Effective Cleaning Power (ECP) as a 2950psiwasher. Includes foam applicator for pre-wash.Suitable for a wide range of applications.

Maximum Pressure: 120barEffective Cleaning Power: 2950psiWater Flow: 360ltr/hrMotor Power: 1700WSupply: 230V - 7.4ATotal Stop System: Rotablast Nozzle: Hose Length: 6mtrWeight: 9kg

AModel No. PC2700

A


Heavy-duty induction motor unit with integral trolley .Pump unit fitted with high pressure by-pass to preservepump life. Features Automatic Total Stop System(TSS) which switches the motor on and of f when thelance trigger is operated, prolonging the motor life.Supplied with hose, trigger and Rotablast Nozzle ®

which helps develop the same Ef fective CleaningPower (ECP) as a 3200psi washer . Includes foamapplicator for pre-wash. Suitable for a wide rangeof automotive, industrial, agricultural, marine anddomestic applications.


BModel No. PC2950

B

TSSAutomatically switches washeron and off when lance triggeris operated. Prolongs the life ofthe motor and saves energy ,protecting the environment.

ROTABLAST NOZZLERotates the water deliveredfrom the pump manifoldand increases cleaningpower by up to 70%. Idealfor removing deep-seatedgrime on paths, patios and vehicles etc.

PRESSURE WASHERDETERGENT

We stock a range of Detergent and Traffic FilmRemovers in both 5ltr and25ltr drums. See page 680for more details.


Heavy-duty induction motor unit produces enoughpower to pump 400 litres of water every hour . Pumpfitted with high pressure by-pass to preserve pump life.Features Automatic Total Stop System (TSS) whichswitches the motor on and off when the lance trigger isoperated, prolonging the motor life. Supplied with 6mtrhose, jet/flat lance and Rotablast Nozzle® which helpsdevelop the same Ef fective Cleaning Power (ECP)as a 3400psi washer. Includes integral detergent tankand detergent flow control valve. Suitable for a widerange of automotive, industrial, agricultural, marineand domestic applications.Maximum Pressure: 140barEffective Cleaning Power: 3400psiWater Flow: 400ltr/hrMotor Power: 2000WSupply: 230V - 8.7ATotal Stop System: Rotablast Nozzle: Hose Length: 6mtrWeight: 17kg

CModel No. New PC3401

C

B C

Section 20 Pressure Washers678

D

D

HighFlow


Manufactured in the EU to high quality standards, andideal for professional use in the automotive,agricultural or industrial environment. Features a twowheel trolley mounted unit with detergent tank, highpressure hose reel with winder, lance and power cordstorage. Fitted with heavy-duty electric induction motorcoupled to high output pump unit with an automaticsafety valve and low-pressure bypass to preservemotor and pump life. Thermal motor protection isstandard. Fitted with Automatic Total Stop System(TSS) which turns of f washer when not in use,prolonging the motor life. Supplied with hose, triggeroperated lance, Rotablast Nozzle ® which increasesEffective Cleaning Power (ECP) and detergentapplicator.


BModel No. PC3700

Professional MobilePressure Washers with TSS

Manufactured in the EU to high quality standards,these high power professional cleaning units featurebrass triplex pumps with triple ceramic piston configuration, variable output and gauge to show output pressure. Both models feature Automatic TotalStop System (TSS), motor with thermal protection, trigger operated lance fitted with spray/jet and high/low pressure control nozzle. Integral trolley has built-in0.5ltr detergent tank and positions for lance and hosestorage. Trolley also features large diameter wheelsfor easy movement over rough terrain.

Model No. SEE BELOW

B

B

Model No: PC1853 PC2003Manifold Pressure: 1850psi 2000psiPressure at Nozzle: 1850psi 2000psiWater Flow: 660ltr/hr 480ltr/hrMotor Power: 2250W 2250WSupply: 230V - 9.8A 230V - 9.8ARecommended Supply: 20A 30AMotor Speed: 2800rpm 2800rpmMaximum Inlet Temperature: 60°C 60°CTrolley Included: Hose Length: 7.2mtr 7.2mtrWeight: 35kg 35kg

D E- E

E

CeramicPistons

Hose ReelKit forPC3455

Optional hose reel kitsuitable for PC3455.

C

Model No. PCHOSE


Heavy-duty induction motor unit produces enoughpower to pump 450 litres of water every hour . Pumpunit fitted with high pressure by-pass to preservepump life. Features Automatic Total Stop System(TSS) which switches the motor on and of f when thelance trigger is operated, prolonging the motor life.Supplied with hose, trigger and Rotablast Nozzle ®

which helps develop the same Ef fective CleaningPower (ECP) as a 3450psi washer . Includes integraldetergent tank. Suitable for a wide range ofautomotive, industrial, agricultural, marine anddomestic applications. Optional hose reel kit availablesee below.

Maximum Pressure: 140barEffective Cleaning Power: 3450psiWater Flow: 450ltr/hrMotor Power: 2400WSupply: 230V - 10ATotal Stop System: Rotablast Nozzle: Hose Length: 5.5mtrWeight: 18kg

AModel No. PC3455

A

C

CeramicPistons

Automatically switches washer onand of f when lance trigger isoperated. Prolongs the life of themotor and saves energy ,protecting the environment.

Rotates the water delivered fromthe pump manifold and increasescleaning power by up to 70%.Ideal for removing deep-seatedgrime on paths, patios and vehicles etc.

Section 20 Pressure Washers 679

Pressure Washer AccessoriesA F-

D

CA B D Pressure Washing Chemicals

Model No: Description: Size:AK130 General Purpose Detergent 25ltrAK131 General Purpose Detergent 5ltrAK132 Traffic Film Remover 25ltrAK133 Traffic Film Remover 5ltr


IMPORTANT SAFETY NOTICE

Before using pressure washers, always inspect power cables,plugs, sockets and any other connectors for wear or damage.

We recommend the use of ourRD981 Residual Current Detectorwith these units, see page 443.

1

2

3

4

3

12

4

PCHOSE

HRK2003

B

C

E

F

G

Water Dispensing Gun

Connects to water hose for dispensing mains pressurewater.

Water Inlet Size: Ø1/2”

HModel No. SA928

H

Model No. SEE BELOW

A

Model No: Rotary Brush Kit: Patio Brush: Surface Brush: Drain Kit: Hose Reel:PC2700 AK125/F - PCPATIO AK127/F -PC2950 AK125/F - PCPATIO AK127/F -PC3455 AK125/F - PCPATIO AK127/F PCHOSEPC3700 AK125/AR PB2003 - AK127/AR -PC1853 AK125/AR PB2003 - AK127/AR HRK2003PC2003 AK125/AR PB2003 - AK127/AR HRK2003PCM1500 AK125/AR PB2003 - AK127/AR -PCM1750 AK125/AR PB2003 - AK127/AR -

Note: Appearance of some accessories may differ from those illustrated.

E F-

Section 20 Pressure Washer Accessories680

1300psi Petrol Pressure Washer2.4hp

Petrol powered pressure washer with recoil starting.Suitable for commercial and domestic applications with5mtr pressure hose, gun, lance and adjustable nozzle.Low-pressure liquid detergent injection system. Safetylatch on trigger and automatic low-oil engine shutdownreduce risks of misuse and equipment damage. Unit stands on four sucker feet to prevent creep, and has integral handle. Supplied with tools and fullinstructions.

Manifold Pressure: 1300psi(90bar)Flow Rate: 420ltr/hrHose Length: 5.0mtrNozzle: Adjustable Spray PatternMaximum Inlet Temperature: 60°CEngine Type: 4-Stroke, Single Cylinder, PetrolEngine Capacity: 81ccEngine Power: 1.8kW(2.4hp) @ 3600rpmStarting: RecoilFuel Tank: 1.6ltrFuel Consumption: 0.8-1.0ltr/hrWeight: 18kg

AModel No. PCM1300

A

2500psi Petrol Pressure Washer6.5hp

Petrol powered pressure washer with recoil starting.Ideal for commercial applications with 5mtr pressurehose, 1mtr gun and lance and adjustable nozzle. Low-pressure liquid detergent injection system withprovision for detergent bottle stowage. Safety latch ontrigger and automatic low-oil engine shutdown reducerisks of misuse and equipment damage. Unit standson four legs, two with sucker feet to prevent creep, andtilts back onto two pneumatic tyres for moving.Supplied with tools and full instructions.

Manifold Pressure: 2500psi(172bar)Flow Rate: 600ltr/hrHose Length: 5.0mtrNozzle: Adjustable Spray PatternMaximum Inlet Temperature: 60°CEngine Type: 4-Stroke, Single Cylinder, PetrolEngine Capacity: 196ccEngine Power: 4.8kW(6.5hp) @ 3600rpmStarting: RecoilFuel Tank: 3.6ltrFuel Consumption: 2.1-2.6ltr/hrWeight: 35kg

BModel No. PCM2500

B

3600psi Diesel Pressure Washer10hp

Diesel powered pressure washer with electric andrecoil starting. Offers high pressure and high flow withdiesel economy. Ideal for commercial applications with5mtr pressure hose, 1mtr gun and lance and fiveinterchangeable nozzles. Low-pressure liquiddetergent injection system. Safety latch on trigger ,automatic low-oil engine shutdown and thermal pumprelief valve reduce risks of misuse and equipmentdamage. Pneumatic tyres. Supplied with tools, sparefuel filter and gasket set.

Manifold Pressure: 3600psi(248bar)Flow Rate: 900ltr/hrHose Length: 5.0mtrNozzles: Low Pressure, Wide Angle, Pencil, Narrow, GeneralMaximum Inlet Temperature: 80°CEngine Type: 4-Stroke, Single Cylinder, DieselEngine Capacity: 418ccEngine Power: 7.5kW(10.0hp) @ 3600rpmStarting: Electric or RecoilFuel Tank: 5.4ltrFuel Consumption: 1.7-2.3ltr/hrBattery: 12V-20AhWeight: 103kg

DModel No. PCDM3600

D

PETROL PETROL

DIESEL

2500psi Petrol Pressure Washer6.5hp Self Priming

Petrol powered pressure washer with recoil starting.Ideal for commercial applications with 5mtr pressurehose, pick-up hose, 1mtr gun and lance and fourinterchangeable nozzles. Self priming pump makesthis unit fully portable for reservoir pick-up, so can beused where no mains pressure is available. Can drawclean water from water butts and tanks etc. Low-pressure liquid detergent injection system withprovision for detergent bottle stowage. Safety latch ontrigger and automatic low-oil engine shutdown reducerisks of misuse and equipment damage. Unit standson four legs, two with sucker feet to prevent creep, andtilts back onto two pneumatic tyres for moving.Supplied with tools and full instructions.

Manifold Pressure: 2500psi(172bar)Flow Rate: 600ltr/hrHose Length: 5.0mtrNozzles: Low Pressure, Wide Angle, Pencil, NarrowMaximum Inlet Temperature: 60°CEngine Type: 4-Stroke, Single Cylinder, PetrolEngine Capacity: 196ccEngine Power: 4.8kW(6.5hp) @ 3600rpmStarting: RecoilFuel Tank: 3.6ltrFuel Consumption: 2.1-2.6ltr/hrWeight: 46kg

CModel No. New PCM2500SP

C

PETROL

C

Self Priming

Section 20 Pressure Washers 681

Large Angled Flo-Thru Brushwith 1.7mtr Telescopic Handle

Manufactured from tough, lightweight structural plasticthat will not crack, bend or break. Super-soft syntheticbristles are safe to use on any surface. Leak resistantaluminium handle with flo-thru feature gives fast andthorough cleaning. Handle extension: 900-1700mm.

AModel No. CC50

Flo-Thru Car Wash Brush

Fine, split-top bristles gently loosen and brush awaydirt. Does not mark expensive clear coats or paintedfinishes. Incorporates hose adaptor.

BModel No. CC51

B

Long Handle Dip 'N' Wash Brush

Fine, split-top bristles gently loosen and brush awaydirt. Does not mark expensive clear coats or paintedfinishes. Long handle for reach to confined areas.

DModel No. CC52

Short Handle Dip 'N' WashBrush

Fine, split-top bristles gently loosen and brush awaydirt. Does not mark expensive clear coats or paintedfinishes.

EModel No. CC53

E

Speed Dusters

100% Soft cotton strands with wax treatment lifts dustfrom paint surface and will not scratch. Makes shortwork of cleaning even the largest showroom vehicles.CC54 supplied in carry bag.Model No: Head Length: Colour:

CC55 150mm BlueCC54 360mm Grey

Model No. SEE BELOW

F G-

200mm Professional Squeegee

Sponge sleeve protected by honeycomb mesh forheavy-duty use. Rubber blade gives streak-free shine.Contoured rubber grip for added comfort and control.

CModel No. CC56

C

Contoured Tyre Applicator

Super absorbent contoured foam applicator designedfor fast, thin and even spread of tyre dressings.Contoured rubber grip for added comfort and control.

HModel No. CC57

H

Contoured Tyre Brush

Sturdy contoured bristles scrub away dirt and debrison tyres. Contoured grip for added comfort and control.

IModel No. CC58

I

Single Loop Detail Brush

Soft loop bristles suitable for cleaning alloy wheels andbody details. Contoured rubber grip.

NModel No. CC59

N

Spoke Brush

Hard bristle brush suitable for cleaning all of the wheelarea including suspension and steering components.

MModel No. CC60

M

Large Interior Brush

Sturdy bristles scrub away stains from upholstery, floormats and vinyl tops. Angled design to reach intocorners easily . Contoured rubber grip for addedcomfort and control.

JModel No. CC61

J

Small Interior Brush

Sturdy bristles to scrub away stains from upholstery ,floor mats and vinyl tops. Unique spot scrubber onhandle. Palm-sized handle contoured to fit fingers.

KModel No. CC62

K

D

A

G

F

FG

Telescopic

0.9-1.7mtr

Water Spray Gun 8 Function

Manufactured from tough, lightweight compositematerial. Features simple three position levercontrolling water flow on, off or with detergent. Rotatingspray head gives eight different options - straight, jet,mist, shower, angle, flat, fan & faucet. Ergonomicallydesigned handle for added comfort. Supplied withmale inlet coupling.

LModel No. New CC83

L

Section 20 Cleaning Brushes682

A B C

G

Prima Microfibre Cloth

Developed for professional detailers, ideal for washingand drying the car exterior. Ultra-fine fibres attract, liftand hold dirt, dust and grease with just a little water .Size: 400 x 400mm

K

K

Model No. CC69

L

Sheen Microfibre Cloth

Sheen Microfibre cloth attracts, holds and lifts dustfrom any surface. Double-sided cloth, particularlysuitable for car interiors.Size: 400 x 400mm

MModel No. CC71

M

Genuine Chamois

Genuine chamois leathers are a superior professionalproduct, cut, conditioned, sized and 100% cod oiltanned. Genuine chamois is soft, supple and will leavesurfaces lint and scratch free.Model No: Size:

CC72 2.5ft2CC73 3.5ft2

Model No. SEE BELOW

H

H I-

Polishing Cloth 500g Roll

Fine, specially woven, 100% cotton fibres that lift loosedirt away from painted surfaces. Works best on highlywaxed finishes. Great for limos, show cars and carcare perfectionist.

NModel No. CC74

N

Double Compartment WashBucket with Wheels

Features two compartments for clean and dirty waterrespectively. Two extra large spouts make this the idealbucket for washing vehicles. Soft grip handle and 4wheels for easy carrying and rolling.

OModel No. CC75

O

J

Forta Microfibre Cloth

Developed by professional detailers for fast removal ofdust and wax from the car surface. Ultra-fine fibres, attract,lift and hold dirt, dust and grease with just a little water.Size: 400 x 400mm

JModel No. CC68

Ultra Suede Microfibre Cloth

Developed for professional detailers, ideal for all windows,mirrors and delicate surfaces. Ultra-fine fibres attract, liftand hold dirt, dust and grease with just a little water.Size: 400 x 400mm

Model No. CC70

L

Speed Drying Synthetic Chamois

Super synthetic chamois has unique ability to absorblarge quantities of water and equally give it up easily.Makes light work of drying down after cleaning.Size: 430 x 680mm

GModel No. CC67

I

HI

EDF

Shaggy Microfibre Sponge 2-in-1

Double-sided sponge with shaggy microfibre strandson one side, which are superb for removing dirt orgeneral cleaning. Non-abrasive mesh cloth on theother side, ideal for bugs and stubborn grime.

DModel No. CC76

Shaggy Microfibre Mitt 2-in-1

Double-sided mitt with shaggy microfibre strands onone side, superb for removing dirt or general cleaning.Non-abrasive mesh cloth on the other side, ideal forbugs and stubborn grime.

EModel No. CC77

Aqua Flexi Blade

Cuts drying time in half. Removes excess water prior tochamoising.

Model No. CC65

CCompressed Sponge

General purpose bone-shaped sponge. Compressedfor easy POS storage.

BModel No. CC64

Sponge 2-in-1

Double-sided sponge. Soft, porous sponge on oneside with a light scourer for tough bug and dirt removalon the other.

AModel No. CC63

Shaggy Microfibre Mitt

Shaggy microfibre mitt. Superb for the removal of dirtwhile washing cars or general cleaning.

FModel No. CC78

Section 20 Cloths & Sponges 683

A B

3

4

24”

6

36”7

36”

5

8

24”

24”

13”1

12”2

12”

Shovel with 710mm Wooden Handle

Tough, pressed carbon steel shovel head tempered forextra strength. Fitted with varnished hardwood ashhandle. Manufactured to BS3388.Length: 1020mmHandle: 710mmBlade: 330 x 255mm

BModel No. SH710

Mop Unit 36ltr

Large composite bucket with four heavy-duty anti-slipcastors and carry handle. Heavy-duty detachablewringer with mop holder.Maximum Capacity: 36ltr

DModel No. New BM01

D

Pure Yarn Cotton Mop 225g withHandle

Highly absorbent, 100% pure yarn cotton head.Features straight grained wooden handle withgalvanized steel socket.Head Weight: 225g

EModel No. New BM02

E

Kentucky Mop 450g with Handle

Extra thick, highly absorbent, 100% cotton head.Features straight grained wooden handle with metallocking clip.Head Weight: 450g

FModel No. New BM03

F

Dustpan & Brush Set

Manufactured from quality composite material forstrength and durability. Brush features long life flexibristles and locks onto pan for easy stowage. Panfeatures rubber squeegee edge to ensure all dirt canbe swept up with ease.

CModel No. New BM04

C

Brooms

Comprehensive range of brooms available in hard and soft bristles or with rubber squeegee head. 12” Modelshave handle support bracket and 24” & 36” Models have metal handle strengthening support. Ideal for inside oroutside use, BM24RS is suitable for oil, water and other liquid spills and BM13H is good for heavy-duty use inyards and gardens.

Model No: Type/Fill: Head Size:BM12H Hard/Bassine 12”BM12S Soft/Coco 12”BM13H Hard/PVC 13”BM24H Hard/Bassine 24”BM24S Soft/Coco 24”BM36H Hard/Bassine 36”BM36S Soft/Coco 36”BM24RS Rubber 24”


12

8

34567

Section 20 Brooms, Shovel & Mops684

D E

Comfort Workshop Matting 700 x 800mm

Hard-wearing rubber/nitrile blend gives good resistance to oils and grease. Providesfatigue relief and insulation from cold concrete floors. Diamond surface design foradded slip resistance. Conforms to slip resistance test EN13552 category R9. Canalso withstand high temperature environments. Moulded bevelled edge to reducerisk of tripping.

Application: FlooringSize: 700 x 800mmThickness: 12.5mm

CModel No. MIW0708

Micro 2-Way Radio Set

Super compact, 2-way radios that fit easily into thepalm of the hand or pocket, yet have the features of afully sized set. Includes eight channels each with 38 sub-channels, voice-activation, call alert, channel scan,auto squelch, key lock and roger beep features.Selectable high and low transmission power levelsmaximise battery life while allowing low-interferencecommunication over a range of up to 2 miles(depending on conditions). Headphone leads with PTTswitch allow hands-free operation when required.Supplied complete with belt clips, 6 x AAA rechargeablebatteries and mains charger plug. No licence required.

FModel No. WT1

F

Ribbed Workshop Matting 900 x 2500mm

Hard-wearing natural rubber with a slip resistant fluted surface. Provides insulationfrom cold concrete floors. Can be used on workbenches to help prevent damage tofragile parts and worktop.

Applications: Flooring & WorkbenchesSize: 900 x 2500mmThickness: 3mm

AModel No. MCR0925

A B

C

Interlocking Comfort Workshop Matting 700 x 800mm

Hard wearing rubber/nitrile blend gives good resistance to oils and grease. Providesfatigue relief and insulation from cold concrete floors. Diamond surface design foradded slip resistance. Conforms to slip resistance test EN13552 category R9. Canalso withstand high temperature environments. Interlocks to make required length inwidths of 700mm. Moulded bevelled edge to reduce risk of tripping .

Model No: MIC0708 MIE0708Type: Centre EndApplication: Flooring FlooringSize: 700 x 800mm 700 x 800mmThickness: 12.5mm 12.5mm

Model No. SEE BELOW

D

Anti-Fatigue Workshop Matting 900 x 1500mm

Hard-wearing rubber provides fatigue relief and insulation from cold concrete floors.Raised circular surface design for superior slip resistance. Conforms to slip resistancetest EN13552 Category R10. Moulded bevelled edge to reduce risk of tripping.

Application: FlooringSize: 900 x 1500mmThickness: 14mm

BModel No. MRM0915

D E

D E-

E

Frequency Range: 446.00625 - 446.09375MHzModulation: FMChannels/Sub Channels: 8/38Display: Backlit LCDBatteries (3 per radio): AAA - Alkaline orNi-MH RechargeableApproximate Battery Life: 10hr - 5% Transmit,5% Receive, 90% Standby

Section 20 Workshop Matting 685

Vacuum Cleaner Wet & Dry 20ltr

High powered, lightweight unit with blower facility .Constructed from high impact plastic, the drum unit ismounted on two castor and two fixed wheels. Toolstowage points on head. Supplied with 4mtr cable with3-pin plug, tool kit, cartridge filter and wet-use foam filter.

AModel No. PC200

A

Industrial Vacuum CleanerWet & Dry 20ltr Stainless Bin

High powered, lightweight industrial unit with blowerfacility. Constructed from stainless steel, the drum unit ismounted on two castor and two fixed wheels. Toolstowage points on head and base. Supplied with 4.5mtrcable with 3-pin plug, deluxe tool kit, including stainlesssteel telescopic rigid extension tube, cartridge filter andwet-use foam filter.

Industrial Vacuum Cleaner Wet & Dry 30ltr Stainless Bin

High powered, lightweight industrial unit with blower facility.Constructed from stainless steel, the drum unit is mountedon two castor and two fixed wheels. Tool stowage points onhead. Supplied with 4mtr cable with 3-pin plug, deluxe toolkit, including stainless steel telescopic rigid extensiontubes, cartridge filter and wet-use foam filter.

EModel No. PC300SD

E

Model No: PC200 PC300 PC200SD PC300SD PC200SD110VMotor Power: 1250W 1400W 1250W 1400W 1250WSupply: 230V 230V 230V 230V 110VMaximum Vacuum Pressure: 140mbar 140mbar 140mbar 160mbar 125mbarAirflow: 120mtr³/hr 120m³/hr 120mtr³/hr 120mtr³/hr 173mtr³/hrDrum Size: 20ltr 30ltr 20ltr 30ltr 20ltrWeight: 5kg 5kg 5kg 7.4kg 5kgVacuum Accessories Ø: 35mm 35mm 35mm 35mm 35mmFilter Type: Cartridge Cartridge Cartridge Cartridge CartridgeCartridge Filter: PC200CFL PC200CFL PC200CFL PC200CFL PC200CFLFoam Filters (Pack of 10): PC200FF10 PC200FF10 PC200FF10 PC200FF10 PC200FF10Optional Dust Bags (Pack of 5): PC200PB5 PC300PB5 PC200PB5 PC300PB5 PC200PB5

Accessory Kit for PC200and PC300.

Accessory Kit for PC200SD,PC200SDAUTO,PC200SD110V, PC300SDand PC300SDAUTO.

The extension tubes supplied with PC200SD, PC200SDAUTO,PC200SD110V, PC300SD & PC300SDAUT O are extendible.Simply press the button and extend to desired length.

A B E F

20ltr

20ltr 30ltr

Industrial Vacuum Cleaner Wet & Dry 20ltr Stainless Bin 110V

High powered, lightweight industrial unit with blowerfacility. Constructed from stainless steel, the drum unit ismounted on two castor and two fixed wheels. Tool stowagepoints on head. Supplied with 4mtr cable and 110V plug,deluxe tool kit, including stainless steel telescopic rigidextension tube, cartridge filter and wet-use foam filter .

FModel No. PC200SD110V

F

20ltr

D

DModel No. PC200SD

D

110V

Vacuum Cleaner Wet & Dry 30ltr

High powered, lightweight unit with blower facility .Constructed from high impact plastic, the drum unit ismounted on four castor wheels. Tool stowage pointson head and base. Supplied with 4mtr cable with 3-pinplug, tool kit, cartridge filter and wet-use foam filter .

BModel No. New PC300

B

30ltr

C

Cartridge Filter for Fine Dust

Cartridge filter for fine particles down to 1micron.Suitable for use with PC200 & PC300 Series.

CModel No. New PC200CFF

HEAVY-DUTY LOCKINGCARTRIDGE FILTERS

All models on this page are fitted with heavy-dutylocking cartridge filter.

DRAIN CAPAll models* featuredon this page are fitted with a drain cap for easy fluid disposal.

*Except PC200

Section 20 Industrial Vacuum Cleaners686

Industrial Vacuum Cleaners Wet & Dry Stainless Bin & Auto-Start

Powerful 1400Watt motor head gives incredible suction through Ø35mm hosing. May also be used as a blower.Integral three-pin BS socket provides power supply for dust-free tools up to 1400W . When operating inconjunction with a power tool the cleaner auto-starts when the tool is started and auto-stops 10 seconds after thetool is switched off - to ensure tool and hose are left free of dust. Stainless steel drum on two castor and two fixedwheels, stainless steel telescopic rigid extension tube as well as tools for wet and dry operations. Tool stowagepoints on head and base. Supplied with cartridge filter and wet-use foam filter.

A B

20ltr 30ltr

POWER OUTLET

Model No. SEE BELOW

A B-

Model No: PC200SDAUTO PC300SDAUTOMotor Power: 1400W 1400WSupply: 230V 230VMaximum Vacuum Pressure: 165mbar 165mbarAirflow: 120mtr³/hr 120mtr³/hrDrum Size: 20ltr 30ltrWeight: 8kg 9kgVacuum Accessories Ø: 35mm 35mmFilter Type: Cartridge CartridgeCartridge Filter: PC200CFL PC200CFLFoam Filters (Pack of 10): PC200FF10 PC200FF10Optional Dust Bags (Pack of 5): PC200PB5 PC300PB5

A B

Vacuum Hose 5mtr

5mtr Vacuum extension hose. Suitable for use withPC200, PC200SD, PC200SDAUTO, PC200SD110V,PC300, PC300SD & PC300SDAUTO.

E

E

Model No. VACHOSE5M


Stainless steel collection tank and powerful, extraheavy-duty motor. The vacuum head is protected by aheavy-duty cartridge filter which locks securely intoplace. Suitable for wet or dry operation.

Motor Power: 1200WSupply: 230VAirflow: 175mtr³/hrDrum Size: 50ltrWeight: 17.5kgVacuum Accessories Ø: 45mmFilter Type: CartridgeReplacement Filter: VAC92/250/DL

DModel No. PC250

D

50ltr

PC250 supplied with cartridge filter as standard.

POWER OUTLET


Industrial stainless steel drum with tough compositebase and head. Supplied with 3.5mtr EV A crushresistant hose, combo nozzle, crevice tool, 380mmsqueegee, vac brush, accessory tool tidy , stainlesssteel rigid tubes, cartridge filter and foam filter . Tankhas easy empty drain cap with screw on hose. Fittedwith two fixed wheels and two castors. Cable storagehooks mounted on frame, accessories and extensiontube holders on base.

Motor Power: 1600WSupply: 230VDrum Size: 60ltrWeight: 16kgFilter type: CartridgeReplacement Cartridge Filter: PC200CFL

CModel No. New PC460

C 60ltr

Section 20 Industrial Vacuum Cleaners 687

Industrial Heavy-Duty VacuumCleaner Wet & Dry 50ltr

Particularly recommended for applications involvingnon-stop use. This machine is perfect for car valeting.A large, industrial full width filter protects the motor andis easily cleaned for constant re-use. Constructed fromhigh impact seamless composite, the drum unit ismounted on a heavy-duty steel and polypropylenetrolley. Supplied with 12.5mtr cable with 3 pin plug anda complete industrial accessory kit with steel tubes.

Motor Power: 1200WSupply: 230VAirflow: 220mtr³/hrDrum Size: 50ltrWeight: 19.5kgVacuum Accessories Ø: 36mmFilter Type: Cloth BagReplacement Filter: 122/06730000

AModel No. VMA92

A B C

50ltr 55ltr 77ltr

All cleaners supplied with full accessory kit.

Front mounted optional squeegee attachment available forPC455 & PC477.

PC455 & PC477 feature swivel bin for easy emptying.PC455 & PC477 suppliedwith cartridge and clothfilter as standard.

VMA92 supplied with heavy-duty cloth filter as standard.

B C -

Industrial Heavy-Duty Vacuum Cleaners Wet & Dry Stainless Bin

High powered, lightweight industrial units. Stainless steel drum with dual filtration system for superior performance.Features safety shut-off for wet operation. Trolleys with swivel bin and two rear locking wheels for easy emptyingplus front swivel castors for added manoeuvrability. Foot operation for squeegee adjustment. Supplied with Ø38mmaccessory kit, 3.2mtr cable with 3 pin plug, cloth and cartridge filters. PC477 is fitted with twin motors of feringsuperior vacuuming power to collect any type of solid from dust to rubble and is particularly suitable for industrialand commercial applications where extra capacity and power are required to clean large areas or large volumes ofwaste. PC455 features blower facility. Optional front mounting squeegee available (as illustrated below).

Model No: PC455 PC477Motor Power: 1050W 2 x 1200WSupply: 230V 230VAirflow: 132mtr3/hr 174mtr3/hrDrum Size: 55ltr 77ltrWeight: 28kg 39kgVacuum Accessories Ø: 38mm 38mmFilter Type: Cartridge, Cloth Cartridge, ClothReplacement Cartridge Filter: PC455.PF PC477.PFReplacement Cloth Filter Assembly: PC455.CF PC477.CFOptional Squeegee: PC455AK1 PC477AK1

Model No. SEE BELOW

CB

B C-

Section 20 Industrial Vacuum Cleaners688

PC90P features integral discharge pump for removal of liquid from drum.

ProfiClean vacuum cleaners feature twin switchable 1200W motors. Also include 230Volt power outlet for tools up to 800Watt.

Heavy-duty filters protect vacuum motors. Cartridge suction filteris suitable for dry use and foam filter should be used for wet applications - cartridge filter reduces airborne dust output.

Industrial Vacuum Cleanerswith Twin Motors

The extremely ef ficient ProfiClean twin motor rangeoffers superior vacuuming power to collect any type ofsolid from dust to rubble. Suitable for industrial andcommercial applications where extra capacity andpower are required to clean large areas or large volumesof waste. Both models feature two 1200W att highpower induction motors, each with separate controlswitch, auxiliary 800Watt power socket, high capacitystainless steel drum and triple filtration system with anefficiency of greater than 99.97%. The trolleys have twoØ155mm fixed wheels and two front castors for easymanoeuvrability, large bumper, power cable winder andaccessories holder. The PC80 and PC90P are alsopowerful liquid vacuum cleaners, with the PC90Pfeaturing a trolley mounted electric pump for liquiddischarge. Both models supplied with full Ø45mmaccessory kit.

Model No: PC80 PC90PMotor Power: 2 x 1200W 2 x 1200WSupply: 230V 230VAirflow: 195mtr³/hr 195mtr³/hrDrum Size: 80ltr 90ltrWeight: 24kg 25kg

Model No. SEE BELOW

Filters & Accessories for PC80 & PC90P

Model No: Description:186.83001H0G Round Suction Cartridge Filter186.83035H0B Foam Suction Filter186.83150H0I Square Output Cartridge Filter186.83139H0B Dust Collection Bags (Pack of 5)

Model No. SEE BELOW

A B

2400W

90ltr

Discharge Pump

B

A B-A

2400W

80ltr

Section 20 Industrial Vacuum Cleaners 689

Cordless Wet & Dry RechargeableVacuum Cleaner 14.4V

Ideal for quick clearing up of spillages. Convenient foruse in the home, workshop or car . Supplied withcrevice tool. Features removable collection chamberfor easy disposal of waste and removable battery withbase charger.Voltage: 14.4VCharging Time: 3-5hrWeight: 1.6kgReplacement Battery: CPV144BP2

AModel No. CPV144

A

E

20ltr

PowerClean Valeting MachineWet & Dry 20ltr

Cleans carpets, car interiors, fabrics and upholstery .Constructed from high impact plastic which is dentresistant and rustproof. Supplied with carpet lance,hand-held lance, full wet and dry vacuum accessory kit,including stainless steel telescopic rigid extension tube,cartridge filter and foam filter . Powerful pump forcescleaning fluid into fabric/carpet and 1250Watt suctionpower leaves surface virtually dry after one pass.Features safety shut-of f for wet operation. Largecapacity drum with external detergent tank for easyfilling. Fitted with two fixed wheels and two castors. Cablestorage hook, accessories and extension tube holderson head plus additional accessory stowage slots on base.Motor Power: 1250WSupply: 230VDrum Size: 20ltrWeight: 10kgFilter Type: PET Type CartridgeReplacement Cartridge Filter: PC310CFOptional Dust Bags: (Pack of 5) PC200PB5

DModel No. PC310

D

Vacuum Cleaner Hand-Held Dry700W/230V

Mains powered, portable vacuum cleaner withpowerful suction. Ideal for small jobs in the home orworkshop and for complete in-car cleaning. Featuresblower adaptation enabling dirt to be removed fromareas that normal nozzles cannot access. Suppliedwith upholstery brush, crevice tool, blower adaptor andnozzle and shoulder strap. Includes easily removablecollection chamber and 4.5mtr mains cable with plug.Motor Power: 700WSupply: 230VDust Capacity: 0.5ltrWeight: 1.7kg

BModel No. PC700

B

14.4V 230V

20ltr

C

Vacuum Cleaner Wet & Dry 10ltr1000W/230V

High powered, lightweight, wet and dry unit with blowerfacility. Constructed from high impact composite withtool and hose stowage points on head. Ideal for vehiclecleaning and general workshop use. Supplied withcrevice and floor tools, cloth and foam filters, 2mtrcable and 3-pin plug.Motor Power: 1000WSupply: 230VAir Flow: 90m³/hrDrum Size: 10ltrWeight: 3.3kgVacuum Accessories Ø: 35mmFilter Type: Cloth & FoamReplacement Cloth Filters: PC100.ACC4Replacement Foam Filters: PC100.ACC2

CModel No. PC100

D

D

10ltr

PC310 Supplied withfull accessory kit.

PC320 Supplied withfull accessory kit.

PowerClean 3-in-1 ValetingMachine Wet & Dry 20ltr

Cleans carpets, car interiors, fabrics and upholstery .Supplied complete with carpet lance, hand-held pistoltool and full wet and dry vacuum accessory kit.Powerful pump forces cleaning fluid into fabric/carpetand 1000Watt suction power leaves surface virtuallydry after one pass.Motor Power: 1000WSupply: 230VDrum Size: 20ltrWeight: 14kgFilter Type: CartridgeReplacement Filter: VAC/92/DLReplacement Dust Bags: (Pack of 5) VAC/PFB

EModel No. PC320

Section 20 Vacuum Cleaners & Valeting Machines690

AutoValet Valeting Machines Wet & Dry

Tough composite tanks and motor housing with integral cable tidy channel for safe storage. Pressure cleans wetand vacuums dry. Professional filtration system protects motor from the ingress of dust and liquids. Fitted with anautomatic tip-over suction cut-out device to prevent damage to the motor. Supplied with tools for wet pressurecleaning of car upholstery and accessories allowing dry vacuuming.

Model No: VMA911 VMA912Motor Power: 1000W 1000WSupply: 230V 230VDrum Size: 20ltr 35ltrWeight: 12kg 13kgReplacement Foam Filter: 186/83035BHB 186/83035BHBReplacement Dust Collection Bag: VAC/PFB 186/83132BOKReplacement Cartridge Filter: VAC/92/DL VAC/92/DLOptional Stand-Up Carpet Lance & Accessory Kit: VMA912/CL10 VMA912/CL10

A C

Both VM9A11 & VMA912 are supplied with a range of accessories.

E

B

20ltr

35ltr

50ltr

Carpet/Upholstery Detergent

We recommend only Sealey cleaning products be usedwith valeting equipment. These chemical agents arespecially formulated for use in Sealey valeting systemsand provide powerful, non-corrosive cleaning power.Model No: Pack Qty: Description:VMR921S 1 x 1ltr Upholstery DetergentVMR921 10 x 1ltr Upholstery DetergentVMR922S 1 x 1ltr De-Foaming AgentVMR922 10 x 1ltr De-Foaming AgentVMR925S 1 x 5ltr Upholstery DetergentVMR925 4 x 5ltr Upholstery Detergent


Carpet Lance & Accessory Kit for VMA911, VMA912 & VMA913

Accessory kit for valeting machines. Contains stand-up carpet lance and a selection of wet and dryattachments.

Applications: VMA911, VMA912 & VMA913

DModel No. VMA912/CL10

AutoValet Valeting Machine Wet & Dry 50ltr Stainless Bin

This top of the range machine is intended for continuoususe. Stainless steel, 50ltr recovery tank increasesintervals between emptying. Ingenious drum mountingreduces ef fort in emptying. Large capacity , externaldetergent tank allows easy filling. Supplied with mobiletrolley and basket for accessories. Professional filtrationsystem protects motor from the ingress of dust andliquids. Supplied with tools for cleaning car upholsteryand accessories allowing dry vacuuming.

Motor Power: 1350WSupply: 230VDrum Size: 50ltrWeight: 27kgReplacement Foam Filter: 186/83035BHBReplacement Dust Collection Bag: 186/83132BOKReplacement Cartridge Filter: VAC92/250/DLOptional Stand-Up Carpet Lance& Accessory Kit: VMA912/CL10

CModel No. VMA913

A B

D

Model No. SEE BELOW

A B-

C

HEAVY-DUTY FILTERSAll of our Professional Valeting Machinesare supplied with a heavy-duty cartridgefilter for dry cleaning.

Section 20 Valeting Machines 691

Submersible Pond Pumps

A range of pond pumps suitable for creating gardenwater features such as fountains and waterfalls*. Theyalso provide the important functions of filtration andwater circulation which are necessary to maintainhealthy plant and fish life. WPP1100 supplied with twofountain heads. WPP2300 and WPP3500 suppliedwith full set of five fountain heads.* Not WPP1100


A B

B

IMPORTANT SAFETY NOTICE

Before using submersiblepumps, always checkhousings, cables andfloats (if fitted) for cracksand other signs of damage. We recommendthe use of our RCD981 Residual Current Detectorwith these units, see page443.

Model No: WPP1100 WPP2300 WPP3500Fountain Heads: A, B A, B, C, D, E A, B, C, D, EOutlet Size OD: 13mm 19mm 19mmMaximum Output: 1100ltr(242gal)/hr 2300ltr(506gal)/hr 3500ltr(770gal)/hrMaximum Head: 1.1mtr 2.3mtr 3.0mtrMotor Power: 20W 55W 95WSupply: 230V 230V 230VCable Length: 10mtr 10mtr 10mtr

Brass Water Hose Coupling Set5pc

High quality brass water hose fitting set. Compatiblewith other popular brands of hose fitting and suitablefor Ø13mm bore garden hose.Contents: 3/4” Female Tap Connector, Hose End Coupling Body, Hose End Coupling Body with Auto Shut-Off, 1/2” Hose Mender, Spray/Jet Nozzle

EModel No. AW599

E

Water Hose Accessories

Model No. SEE BELOW

F

G

C

Fountain EffectsA B C D E- Cascade - Water Bell - Foam Jet - Water Lily - Petunia

A C-

1100ltr/hr Up to3500ltr/hr

Model No: Description:AW199 1/2” Water Hose Joiner/MenderAW299 1/2” Universal Tap Adaptor

F G-

FG

C

D Available in:15mtr30mtr80mtr

Water Hoses with Nozzle

Fitted with spray/jet nozzle and universal tapconnector. Reinforced green PVC hoses with Ø13mmbore. GH15R/12 Features auto shut-of f connector .

Model No: Length: Size Ø:GH15R/12 15mtr 13mmGH30R 30mtr 13mmGH80R 80mtr 13mm


Section 20 Submersible Pond Pumps692

Submersible Water Pumps

Manufactured from corrosion resistant materials withstainless steel motor case and Noryl base cover .Available with or without automatic cut-out. Minimumwater depth of just 8mm. Designed for clean wateralthough these pumps will accept small particles up to5mm. Suitable for the ef fective drainage of cellars,sinks, cisterns, baths and the general transfer of water.


C

E

B

D

F

Submersible Dirty Water PumpAutomatic 235ltr/min 230V

Manufactured from corrosion resistant materials withstainless steel motor case and Noryl base cover. Fittedwith automatic cut-out. Minimum water depth of 45mm.Designed for operation in dense and clean water .Suitable for the ef fective drainage of cellars, sinks,cisterns, baths and the general transfer of water anddense liquids.

GModel No. WPD235A

G

A B C D E F G H

Submersible Stainless Steel WaterPump Automatic 225ltr/min 230V

Manufactured from corrosion resistant materials withstainless steel body and motor case. Fitted withautomatic cut-out. Minimum water depth of 50mm.Designed for operation in dense and clean water .Suitable for the ef fective drainage of cellars, sinks,cisterns, baths and the general transfer of water anddense liquids.

HModel No. WPS225A H

Surface Mounted Water Pump60ltr/min 230V

Heavy-duty induction motor with Noryl impeller, chokevalve and venturi tube. Suction pump suitable fordrawing brackish water. Pump housing made from highimpact thermoplastic material for added durability .Suitable for lifting water up to 9 metres.

Outlet Size OD: 1”BSPMaximum Output: 60ltr(13gal)/minMaximum Head: 42mtrMotor Power: 900WSupply: 230V

IModel No. WPS060

I

Lay-Flat Water Hoses 10mtr

High quality PVC hose reinforced with synthetic fibres.Suitable for water discharge only.

Model No: Length: Size Ø:LFH1025 10mtr 25mmLFH1032 10mtr 32mmLFH1038 10mtr 38mm


A F-

10mtr

AutoCut-Out

AutoCut-Out

AutoCut-Out

Model No: WPC100 WPC100A WPC150 WPC150A WPC235 WPC235A WPD235A WPS225ACut-Out: Manual Automatic Manual Automatic Manual Automatic Automatic AutomaticOutlet OD: 32mm 32mm 32mm 32mm 38mm 38mm 38mm 38mmMax. Output: 100ltr(22gal)/min 100ltr(22gal)/min 150ltr(33gal)/min 150ltr(33gal)/min 235ltr(51gal)/min 235ltr(51gal)/min 235ltr(51gal)/min 225ltr(49gal)/minMax. Head: 7mtr 7mtr 8mtr 8mtr 9mtr 9mtr 8mtr 8mtrMax. Running Cycle (hr): 3 in 6 3 in 6 3 in 6 3 in 6 3 in 6 3 in 6 3 in 6 3 in 6Motor Power: 250W 250W 400W 400W 750W 750W 750W 750WSupply: 230V 230V 230V 230V 230V 230V 230V 230V

Solid Wall Suction Hose forWPS060

Solid wall hose for use on suction side of water pumps.Suitable for use with WPS060.

Model No: Length: Size Ø ID/OD:WPS060HS 4mtr 25/30mmWPS060HL 7mtr 25/30mm


J K

For DirtyWater

Section 20 Submersible Pumps 693

Important Note:There are 3 standards for ladders in the UK, Class 1,2 and 3. EN131 has replaced BS2037 Class 2. Confusion arises with the term 'duty rating', whichBritish Standards arrive at through consideration offrequency and general conditions of use. For consistency we quote maximum static vertical loadfigures for all our ladders. W e only of fer trade and industrial ladders. See table below for clarification.

Class Type Standard Max. Static Duty Vertical Load Rating

Class 1 Industrial BS2037 175kg 130kgClass 2 Trade EN131 150kg n/aClass 3 Domestic BS2037 125kg 95kg

Trade Aluminium Step LaddersEN131

EN131 Approved aluminium step ladders with 150kgcapacity. Durable lightweight anodised aluminium alloyframe. Deep non-slip steps and wide platform withsafety rail allow plenty of leg room for safe standing.Ribbed feet give full floor contact for extra stability .

Model No: ASL3S ASL5 ASL7Treads: 3 5 7Weight: 3.7kg 4.9kg 7.3kgMax. Reach Height: 2400mm 2840mm 3280mmBase Width: 430mm 475mm 520mmMaximum Capacity: 150kg 150kg 150kg

A

1

ASL5ASL3S ASL7

1090

1690

2840

3280

2150

1530

Dimensions in mm

Industrial Aluminium StepLadders BS2037 Class 1

BS2037 Class 1 approved professional IndustrialAluminium platform steps. Rigid box section aluminiumwith heavy-duty cross brace for extra strength andstability. Double riveted extra large non-slip treads.Wide platform and high safety rail allow plenty of legroom for safe standing.

Model No: AXL6 AXL8 AXL10Treads: 6 8 10Weight: 7.7kg 10.9kg 12.7kgMax. Reach Height: 3000mm 3500mm 3900mmBase Width: 465mm 520mm 565mmMaximum Capacity: 175kg 175kg 175kg


B

1240

1700

2320

AXL6 AXL8 AXL10

3500

1880

30002130

2730

3900Dimensions in mm

150kgCapacity

EN131Trade

175kgCapacity

BS2037Industrial

2400

1250

2 3

1 2 3

1 2 3

1 2 3

650


C 150kgCapacity

Step Stools 150kg Capacity

Tubular metal construction with rubber feet for addedstability. Features three large anti-slip metal treads. Foam-cushioned hand rail for added comfort. Suitablealso as a stool. Folds flat for easy storage andtransportation.

Model No: ASL2 ASL23Treads: 2 3Maximum Capacity: 150kg 150kgTop Step Height: 460mm 720mmFloor Area: 570 x 480mm 670 x 480mm


1 2

1 2

Section 20 Ladders694

Made in

Section 20 Ladders 695

Trade Combination Ladders 3-Section EN131

Multi-use aluminium extension ladders manufactured to EN131 standards. Ideal for the tradesman, these ladderscan be used as a 3-section or 2-section extension and as a single ladder, which is ideal for two-man use. Can beused as a step and extension step ladder where stability and height are needed. Compact size for easy handlingand storage. Two larger models suitable to extend up to the apex of a house.

Model No: ACL306 ACL3 ACL312Minimum Height:: 1.8mtr 2.54mtr 3.45mtrMaximum Extension: 3.70mtr 5.94mtr 7.35mtrMaximum Capacity: 150kg 150kg 150kgWeight: 8kg 13.5kg 18kg


A C-A C-

Industrial Aluminium 3-WayMulti-Purpose Ladder BS2037

BS2037: 1994 Class 1 - Three-way multi-use aluminiumladder with 130kg Duty Rating. Maximum capacity 175kg.Compact size for easy handling and storage. Supplied withwork tray with provision for paint tin, brushes, screwdrivers,etc. Can be used as an offset step ladder on stairs or platforms,standard step ladder or two-section extension ladder.

DModel No. ACL2

D

1240

2340

1290

2390

2090

3190Dimensions in mm

Two SectionExtension

Offset StepLadder

Step Ladder

B

175kgCapacity

BS2037Industrial

150kgCapacity

EN131Trade

CBA

DD

A C150kgCapacity

EN131Trade

150kgCapacity

EN131Trade

D

Made in

Section 20 Ladders696

A

Industrial Fibreglass Step Ladder5-Tread BS2037

Made from fibreglass with aluminium treads, theselightweight steps are non-conductive. Certified toEN131 and ANSI 14.5 (Industrial). Treads comply withBS2037.

Treads: 5Height: 1.83mtrMaximum Capacity: 175kgWeight: 7.5kg

BModel No. FSL6

B

100kgCapacity

BS7553

175kgCapacity

BS2037Industrial

Loft Ladder 3-Section

Aluminium loft ladder manufactured to BS7553:1992Class G. Supplied with hand rail and all fixings withfactory assembled components for quick and easy installation. Three-section design enables ladder to fitin smaller areas than standard two-section ladders.

Loft Opening (W x L): 432 x 508mmMaximum Height: 3mtrLoft Clearance: 1050mmMaximum Capacity: 100kg

AModel No. LFT03

Ladder Roof Rack Clamps

Safe and easy way to secure ladders with a universalfitment for roof racks. Yellow phosphate finish for addedcorrosion resistance. Suitable for trades where laddersneed to be transported safely for on-site applications.Supplied with two heavy-duty iron padlocks for security.Made in UK and BS1706 approved.Maximum Width: 365mm

DModel No. SLC2

Ladder Stabilizer

Safe and easy way to stabilize your ladder on even oruneven surfaces. Yellow phosphate finish for addedcorrosion resistance. Suitable for trades where laddersneed to be used for on-site applications. Featuresheavy-duty metal feet fitted with non-slip rubber padsfor added grip and four eyelets for pegging to ground(pegs not included). Tray is adjustable for angle andincludes an integral tie down to secure ladder .Increases ladder footprint from 26cm 2 to 3097cm 2.

Ladder Tray (W x D): 500 x 125mmOverall Size (W x D x H): 605 x 515 x 112mm

EModel No. New LAD001

E

Ladder Stand-Off

Aluminium framed stand-off, fits to any ladder. Offerssuperb stability at the top of a ladder with a wide spanof 1000mm. Positions ladder 360mm away from workarea. Fitted with rubber feet to help prevent slipping.Supplied with easy installation instructions.

Span Width: 1000mmStand-Off: 360mm

CModel No. New LAD002

C

Ladder Roof Hook

Safe and easy way to access a roof with your ladder.Lightweight aluminium design. Suitable for tradeswhere ladders need to be used for on-site applications.Features non-slip composite wheel and r-shape hookswith anti-slip rubber feet. Made in UK.

Maximum Load: 150kg

FModel No. New LAD003

F

C

FF

D

Made in

Made in

Made in

Made in

Made in

Made in

A

BC

Trade Aluminium FoldingPlatforms

Folding and portable aluminium platform with 150kgcapacity. Large, ribbed non-slip platform and treads forsafe and easy manoeuvrability . Durable aluminiumalloy frame with ribbed feet provides extra stability .Safety locking catches on legs. Folds flat for easystorage and transportation.Model No: Treads: A: B: C: Weight:

APS2 2 460 1140 500 6kgAPS3 3 660 1460 500 8kg

Model No. SEE BELOW

Dimensions in mm

Dimensions in mm

Trade Aluminium FoldingPlatform Ladder

EN131 Approved four-way , four-section aluminiumladder with mechanically swaged joints. Six robust autolatching locking hinges allow for multi positioning. Canbe used as a platform, straight ladder , step ladder oroffset ladder. Extra safety provided by twelve reinforcedrungs and stabiliser feet.Illustrated above with optional metal platform, orderModel No. AFPL1/P to use in platform/scaffold position.

Model No: A: B: C: D: E: F: Weight:AFPL1 957 1728 270 1007 360 3600 14.2kg

EModel No. AFPL1

Trade Aluminium FoldingExtension/Telescopic Ladder

Multi-use, adjustable height, aluminium extension ladders.Manufactured to EN131 with auto-latching hinge andsafety lock. Ideal for the tradesman, these ladders can beused as a multiple height step ladder or as a single ladder.Telescopic design enables step ladder to be used onsteps or uneven ground.Minimum Height: 1mtrMaximum Extension: 2.31mtrMaximum Capacity: 150kgWeight: 12.3kg

E

A

C

B

F

D

E

120kg

150kgDimensions in mm

D

B C-

D

EN131Trade

Model No. AETL33

150kgCapacity

150kgCapacity

EN14183Trade

C

B

150kgCapacity

EN14183Trade

Adjustable height control allows either leg to be adjusted to required height allowing the ladder to beused on stairs or uneven ground.

150kgCapacity

EN131Trade

CB

EAFPL1 illustrated withoptional platformAFPL1/P

Aluminium Folding Platform 2-Tread

Folding and portable aluminium platform with 115kgcapacity. Large, ribbed non-slip platform and treads forsafe and easy manoeuvrability . Durable aluminiumalloy frame with ribbed feet provides extra stability .Safety locking catches on legs. Folds flat for easystorage and transportation.Model No: Treads: A: B: C: Weight:APS2E 2 520 1200 415 4.5kg

AModel No. New APS2E

A

ADJUSTABLE HEIGHT

115kgCapacity

Section 20 Platforms & Ladders 697

Platform Tower Stand 150kg Capacity EN131

EN131 Approved high quality scaffold platform systemfor the professional tradesman. Robust aluminiumframe unit with anodized finish for durable corrosionresistance. Heavy-duty platform with trap door for safeaccess to platform. Can be used as a 3mtr or 4mtrworking height platform by fitting extension kit suppliedwith the unit. Unique design enables the unit to bequickly and easily folded down without tools fortransportation or storage. 780mm Width means unitwill pass through most doorways even when fullyerected. High hand rail for comfort and safety . Fourlarge Ø125mm castors for easy mobility.

AModel No. SSCL1

A

B

Aluminium Scaffold Ladder 150kg Capacity EN131

EN131 Approved four-way scaffold ladder. Two six-rungaluminium ladders can be used as extending ladder ,single ladders, step ladder or complete scaffolding unit.Supplied with security bar and stability leg.

BModel No. ASCL1

Model No. A B C D E WeightSSCL1 780 1670 3000 4000 340-2360 36kg

CB

E

A

FD

150kg

150kg

EC

D

B

D

A

150kg

Dimensions in mm

Dimensions in mm

C D

Adjustable Height WorkingPlatforms

Manufactured to work platform standard N FP 93-352.Professional mobile platform meets the requirement ofthe HSE working at height regulations. Durablealuminium alloy frame with ribbed feet and adjustableside supports for extra stability allow the platform to beused on uneven ground. Fully adjustable platform height.Front and side hand rails, two latching rear rails and kneebar for all around safety. Spring action latches withsmoothextension and locking of adjustable height steps. Largenon-slip platform with kick boards on three sides. Fittedwith two wheels for manoeuvrability when closed oropen. Folds flat for easy storage and transportation.

Model No: AHWP46 AHWP79Treads: 4-6 7-9Closed Length: 2380mm 3130mmPlatform Height: 1060-1520mm 1770-2230mmMaximum Capacity: 150kg 150kgPlatform Size: 600 x 450mm 600 x 450mmWeight: 30kg 36kg

Model No. SEE BELOW

150kgCapacity

EN131Trade

150kgCapacity

EN131Trade

150kgCapacity

N FP 93-352

Model No. A B C D E F WeightASCL1 2620 1600 1720 1470 1000 805 16kg

C D-

C D

C D

Measurements C & D are approximate working heights with and withoutextension pack (supplied).

Section 20 Platforms698

Section 20 Kick-Steps & Mobile Safety Steps 699

D

Kick-Step - Composite

Robust composite construction with non-slip surface.Three spring-loaded wheels allow step to glide over floor,yet sit down firmly on rubber stops when load is applied.

Step Heights: 220, 420mmBase Size: Ø440mmCapacity: 150kg

AModel No. KS2

A

C

Kick-Step - Steel

Steel construction with heavy non-slip rubber treads.Three spring-loaded wheels allow step to glide over floor,yet sit down firmly on rubber stops when load is applied.

Step Heights: 220, 430mmBase Size: Ø440mmCapacity: 150kg

BModel No. KS1

B

Convex Mirror 400mm Wall Mounting

Heavy-duty convex mirror for improved visibility. Fittedwith protective hood. Supplied with adjustablegalvanized wall mountings. Suitable for use as safetyor security mirror.Diameter: 400mm

CModel No. CM400

Mobile Safety Steps

Robust, round steel tube construction with non-slip step treads. Two fixed wheels and two retractable castorsgive mobility and allow easy positioning. Castor lock-down lever, on models with five or more treads, restrictstread access as a reminder to retract castors before climbing. 150mm Kick board on three sides of platform. Model No: Treads: Platform Tread Platform Overall Size Weight:

Height: (W x D): (W x D): (W x D x H):MSS02 2 500mm 550 x 200mm 550 x 400mm 650 x 590 x 1500mm 20kgMSS03 3 750mm 550 x 200mm 550 x 400mm 650 x 760 x 1750mm 28kgMSS04 4 1000mm 550 x 200mm 550 x 400mm 650 x 910 x 2000mm 32kgMSS05 5 1250mm 550 x 200mm 550 x 400mm 835 x 1270 x 2250mm 55kgMSS06 6 1500mm 550 x 200mm 550 x 400mm 835 x 1360 x 2500mm 62kgMSS07 7 1750mm 550 x 200mm 550 x 400mm 850 x 1450 x 2750mm 70kgMSS08 8 2000mm 550 x 200mm 550 x 400mm 850 x 1575 x 3000mm 78kgMSS09 9 2250mm 550 x 200mm 550 x 400mm 850 x 1730 x 3250mm 90kgMSS10 10 2500mm 550 x 200mm 550 x 400mm 1000 x 1905 x 3500mm 98kgMSS11 11 2750mm 550 x 200mm 550 x 400mm 1000 x 2070 x 3750mm 105kgMSS12 12 3000mm 550 x 200mm 550 x 400mm 1000 x 2230 x 4000mm 116kgMSS13 13 3250mm 550 x 200mm 550 x 400mm 1230 x 2470 x 4250mm 125kgMSS14 14 3500mm 550 x 200mm 550 x 400mm 1230 x 2630 x 4500mm 130kgMSS15 15 3750mm 550 x 200mm 550 x 400mm 1320 x 2795 x 4750mm 138kg

Model No. SEE BELOW

D

These products are manufactured to order and, due to the size, are delivered direct from our factory. Please allow at least 15 days for delivery and provide the full address including postcode of the place of work.

Note: Additional carriage charges apply for remote locations and offshore Islands.

Available with2 - 15 Treads

300kgCapacity

D

Section 20 Cigarette/Litter Bins700

Cigarette Floor AshtrayHeavy-Duty

Manufactured from 1mm mild steel and finished forresistance to corrosion. Twin openings in concavecover for safe and hygienic use. Suitable for use inbuilding entrances and smoking areas.

Size (W x D x H): 330 x 235 x 104mm

HModel No. RBFB1

Cigarette Ashtray & Litter BinHeavy-Duty

Manufactured from 1mm mild steel and finished forresistance to corrosion. Four-way opening with heavy-duty removable mesh cover. Suitable for use inbuilding entrances and smoking areas.

Size (W x D x H): 250 x 255 x 457mm

IModel No. RBAB1

G

Cigarette Bin Wall MountingHeavy-Duty

Two-piece design for easy installation, emptying andcleaning. Metal construction with Zinctec liner . Fittedwith high quality lock and supplied with two keys.Includes fittings for wall mounting. Suitable for use inbuilding entrances and smoking areas.Size (W x D x H): 245 x 65 x 380mm

GModel No. RBCB1

IH

F

Cigarette Bin Wall MountingStainless Steel Heavy-Duty

Two-piece design for easy installation, emptying andcleaning. Stainless steel construction with Zinctec liner.Fitted with high quality lock and supplied with two keys.Includes fittings for wall mounting. Suitable for use inbuilding entrances and smoking areas.

Size (W x D x H): 245 x 65 x 380mm

Model No. RBCB2

F

Cigarette Bin Wall Mounting

Two-piece design for easy installation, emptying andcleaning. Metal construction with Zinctec liner . Fittedwith high quality lock and supplied with two keys.Includes fittings for wall mounting. Suitable for use inbuilding entrances and smoking areas.

Size (W x D x H): 260 x 80 x 320mm

AModel No. New RCB01

A

Cigarette Bin Wall MountingStainless Steel

Two-piece design for easy installation, emptying andcleaning. Stainless steel construction with Zinctec liner.Fitted with high quality lock and supplied with two keys.Includes fittings for wall mounting. Suitable for use inbuilding entrances and smoking areas.

Size (W x D x H): 260 x 80 x 320mm

BModel No. New RCB02

B

Cigarette Bin Floor Standing

Two-piece design for easy installation, emptying andcleaning. Metal construction with Zinctec liner . Fittedwith high quality lock and supplied with two keys.Suitable for use in building entrances and smokingareas. Can be used freestanding or permanently fixedto the floor.Size (W x D x H): 235 x 235 x 1325mm

CModel No. New RCB03

C

Cigarette Floor Ashtray

Manufactured from 1mm mild steel and finished forresistance to corrosion. Twin openings in concavecover for safe and hygienic use. Suitable for use inbuilding entrances and smoking areas.

Size (W x D x H): 335 x 230 x 112mm

DModel No. New RCB04

D

Cigarette Ashtray & Litter Bin

Three piece design with separate ashtray and rubbishbin. Easy installation, emptying and cleaning. Metalconstruction with complete blackened powder coatfinish. Fitted with high quality lock and supplied withtwo keys. Suitable for use in building entrances andsmoking areas.Size (W x D x H): 300 x 220 x 1000mm

EModel No. New RCB05

E

Section 20 Vehicle Locks/Clamps & Parking Barriers 701

Wheel Clamp

Manufactured from quality steel with zinc plating forcorrosion resistance. Simple and quick ratchet actionmakes protection easy. Fully lockable and suppliedwith two keys. Ideal for total forecourt protection.Finished in yellow for high visibility.

Maximum Clamp Diameter: 640mmMinimum Clamp Diameter: 450mmMaximum Tyre Width: 225mm

EModel No. PB397

E

Claw Car Wheel Clamp

Claw locks around wheel rim and tyre. Simple and quickratchet action makes fitting easy. Fully lockable. No needto touch wheel or tyre when installing/removing so handsremain clean. Plastic-sleeved claws will not damagealloys. Finished in yellow and red for high visibility.Maximum Clamp Width: 270mmMinimum Clamp Width: 180mmThroat: 190mm

CModel No. PB395

C

Heavy-Duty Steering WheelLock

Lock that is quick and easy to fit to steering wheel.Highly visible deterrent to the vehicle thief. Adjustableto suit different sized steering wheels. Supplied withtwo keys.

Maximum Wheel Rim Diameter: 30mm

BModel No. PB394

B

Wheel Clamp

Triple arms lock around tyre. Simple and quick slidingaction makes fitting easy. Fully lockable and suppliedwith two keys. Finished in yellow for high visibility .

Maximum Clamp Diameter: 740mmMinimum Clamp Diameter: 540mmMaximum Tyre Width: 220mm

DModel No. PB396

D

Steering Wheel Lock

Hardened steel lock that is quick and easy to fit tosteering wheel. Highly visible deterrent to the vehiclethief. V inyl coating protects steering wheel fromdamage. Supplied with two keys.

Wheel Internal Diameter Range: 230-380mm

AModel No. PB393

A

E

Parking Barrier - Single Post

Manufactured from 4mm wall thickness square sectionsteel, our extra-heavy-duty single post parking barrier isfitted with integral lock. All parts galvanized or zinc platedfor corrosion resistance. All instructions and fixings forinstallation included. Location screws are Torx® headedto prevent theft. For full security, we suggest you drill outthe screw head after installation.Minimum Height: 65mmMaximum Height: 600mmWidth: 50mm

FModel No. PB197

F

Parking Barrier - 3 Leg

Heavy-duty parking barrier manufactured fromØ35mm tube steel. Supplied with padlock and twokeys. All parts galvanized or zinc plated for corrosionresistance. For full security, we suggest you drill outthe screw head after installation.Minimum Height: 50mmMaximum Height: 400mmWidth: 755mm

GModel No. PB296

G

C

F

Section 20 Cycle Carriers & Stand702

E

Rear Cycle Carrier 3 Cycles

Rigid yet lightweight carrier designed to fit mostsaloons, hatchbacks, vans, estates and coupes.Carries up to 3 standard cycles and includes 6 nylonfixing straps and foam rubber tubes for protection ofboth vehicle and bikes. Folds away for easy storage.Model No. BS3/1 - Set of adaptors for use when fixingstraps of cycle carrier to glass edged hatches.

DModel No. BS3

A B

Cycle Carrier Lighting Board

Composite 3ft board fitted with two metres of 7 corecable and 12Volt N type plug. Includes 2 x e approvedreflective triangles and 2 x 4-function lamp cluster (stop,tail, indicator and number plate illumination light). Important: Standard trailer boards should not be usedin conjunction with cycle carriers.

EModel No. TB3/2

Workshop Bicycle Stand

Corrosion resistant zinc plated steel tubes constructedwith aluminium head and foot castings for strength anddurability. High impact resistant jaws swivel through360° and will accept down-tubes, crossbars and seat-posts of racing, mountain and hybrid bikes. Multi-position storage tray ensures tools are alwaysclose at hand and includes a can holder. Legs and toparm are removable for ease of storage.

Minimum Height: 1250mmMaximum Height: 1450mmWeight: 8kg

FModel No. BS1

Tow Bar Cycle Carrier 3 Cycles

Designed to slot onto plate fixed behind the tow ball.Allows transportation of cycles even when towing acaravan or trailer. Carries 3 cycles (2 mountain bikes)up to a total weight of 35kg and is fitted with compositeprotectors to prevent damage to frames.

BModel No. BS4

F

DC

Tow Ball Cycle Carrier 2 Cycles

Strong tubular construction. Mounts firmly onto anyØ50mm tow ball in seconds and will carry 2 cycles.Positive lock action includes a provision for anti-theftlock (not included). Folds down flat for storage.

AModel No. BS2

Rear Cycle Carrier2 Cycles

Rigid yet lightweight carrier designed to fit mostsaloons, hatchbacks, vans, estates and coupes. Carries up to two standard cycles and includes nylonbike straps, six nylon mounting straps and four foampads to prevent damage to car. Folds for easy storage.

CModel No. BS17

Adjustable Wall MountingCycle Rack

Wall mounting cycle rack. Heavy-duty galvanizedsteel construction with 180° swivel movement.

F

F

E

Cycle Storage RackWall Mounting 2 Cycles

Wall mounting storage rack, with two arms that willsupport up to two cycles.

Width: 450mArm Length: 500m

Model No. BS6

E

AModel No. BS13

A B C

D

Cycle Racks

Heavy-duty racks, manufactured from steel with zinc plating for corrosion resistance.

Model No: BS14 BS15 BS16Cycle Capacity: 1 3 5Dimensions (W x D x H): 90 x 260 x 335mm 700 x 260 x 320mm 1420 x 260 x 320mmMaximum Tyre Width: 40mm 55mm 55mm


B C D

D-

Cycle Racks

Heavy-duty racks, manufactured from steel with zinc plating for extra corrosion resistance.

Model No: BS10 BS11 BS12Cycle Capacity: 1 3 5Dimensions (W x D x H): 390 x 390 x 250mm 730 x 390 x 240mm 1310 x 390 x 240mmMaximum Tyre Width: 50mm 50mm 50mm

Model No. SEE BELOW

G I-

G IH

G

Cycle Storage Rack Folding Wall Mounting 2 Cycles

Wall mounting storage rack. Two folding arms can beswung up out of the way when unloaded. Supports upto two cycles.

Width: 500mmArm Length: 500mm

Model No. BS7

F

H

I

Folding arms can be swung up out of the way when unloaded.

Section 20 Cycle Racks 703

F

G

A A

Heavy-Duty Ratchet Tie Downs

Model No: Qty: Length: Max. Tension: Load Test:TD115 2 Sets 5mtr 400kg 800kgTD135 1 Set 5mtr 400kg 800kgTD150 1 Set 6mtr 750kg 1500kgTD220 1 Set 6mtr 1000kg 2000kgTD614 1 Set 9mtr 1500kg 3000kgTD914 1 Set 9mtr 2000kg 4000kgTD1214 1 Set 9mtr 2500kg 5000kgTD2214 1 Set 9mtr 5000kg 10000kg

Tarpaulin Clip Set 2pc

Rugged composite clip with heavy-duty spring andbungee cord. Ingenious design grips tarps andsheeting tight without the need to locate rope eyes.The tighter the clip is pulled the tighter it grips. Simpleto release. Suitable for use on trucks, trailers, farm,garden and garage applications.

CModel No. TARP/2

C

Tarpaulin Clip Set 4pc

Composite clip set with heavy-duty spring. Simple-to-use with tension adjusting control to enable a firm gripof tarpaulins and sheeting without the need to use ropeeyes. Suitable for use on trucks, trailers, farm, gardenand garage applications.

BModel No. TARP4

B

D

Heavy-Duty Ratchet Tie Downs

Manufactured from polyester webbing with stitchedreinforcement around hooks. Suitable for securing loadsand tarpaulins onto flat-beds or trailers and for generalload restraint. Tie-downs rely on the operator tensioningthe webbing with body weight. Ratchet tie-downsmechanically tension the webbing using a simple drumand ratchet mechanism providing superior load restraint.

HModel No. SEE TABLE

H

H

Polypropylene Rope

All-purpose polypropylene rope. Available in Ø6mm x50mtr and Ø10mm x 20mtr.

Model No: Diameter: Length:RC0650 6mm 50mtrRC1020 10mm 20mtr

Model No. SEE BELOW

Model No. SEE BELOW

F G-

E

Tarpaulin Lashing Eyes 4pc

Screw-fit, reusable lashing eyes can be positionedexactly where required on the tarpaulin. Manufacturedfrom plastic, for all-weather durability , lashing eyeshave a large clamp area for maximum grip andreduced risk of tarpaulin tearing.

DModel No. TARP405

IMPORTANTThe table above indicates two load specifications. The maximum tension is that which is developed by the ratchetmechanism. The test load is the capacity of the webbing to resist shock loads. For full specifications see page 219.

FG

Model No. TD150 illustrated.

Heavy-Duty Tarpaulins

Manufactured from 130g/m² material with heavy , 30micron laminate. Tear-proof, waterproof and treated with aUV filter to prolong life and durability. Mould and mildewproofed. Constructed with roped edges and metalgrommets in all corners and every 3 feet. Top qualitytarpaulins available in blue or green are suitable for farm,garden, body shop, garage, boat yard and leisure use.


Assorted Tarpaulin Cord Set12pc

Adjustable composite hooks with ball-ended bungeecords. The cord is detached from the hook, fed throughthe tarpaulin rope eye and then reattached at therequired length. Three dif ferent length cords aresupplied, with a maximum safe stretch up to 1015mmand safe load up to 22.7kg.

Contents: 4 x 305mm, 4 x 455mm, 4 x 610mm.Free Length: Maximum Stretch:305mm 635mm455mm 865mm610mm 1015mm

EModel No. TARP12

BLUE GREENModel No: Model No: Size:TARP68 TARP68G 6’ x 8’TARP810 TARP810G 8’ x 10’TARP1012 TARP1012G 10’ x 12’TARP1216 TARP1216G 12’ x 16’TARP1620 TARP1620G 16’ x 20’ TARP1824 TARP1824G 18’ x 24’ TARP2040 TARP2040G 20’ x 40’ Note: Nominal sizes

Section 20 Tarpaulins704

Caravan Covers

Four layer, non-woven polypropylene material that isbreathable and weather resistant, with reinforced roofcorners for maximum durability. Zippers offer quick andeasy access to doors without removing the cover .Hook-and-loop fasteners for the rolled up side oreyelets to fix as a sun awning. Elastic stitched hemprovides universal fitting. Features compositefastening clips for quick and easy fixings. Supplied in adurable weatherproof bag for easy storage.Model No: Size:TCCS 4260 x 2250 x 2200mmTCCM 5200 x 2250 x 2200mmTCCL 5800 x 2250 x 2200mmTCCXL 6400 x 2250 x 2200mmTCCXXL 7000 x 2250 x 2200mm


Car Covers

Ideal for protection, rain or shine, against weatheringand fading. Double layer cover for extra protection. Innerlayer is made from soft anti-scratch material to protectvehicle’s paintwork. Elastic corners for easy and securefitting. Side-opening zips to allow access to the car whencovered. Supplied with waterproof storage bag.Model No: Size:CCS 3800 x 1540 x 1190mmCCM 4060 x 1650 x 1220mmCCL 4300 x 1690 x 1220mmCCXL 4830 x 1780 x 1220mm


A

Car Wheel Cover Set 4pc

Manufactured from non-woven, water repellentmaterial. Rimmed and elasticated for easy fit. Coverprotects wheels and tyres from over-spray in paintshop and tyres from light degradation during long-termstorage. Universal size suitable for most wheels.Cover Ø: 670mm

CModel No. CCW4

C

A

A

B

B

Motorcycle Covers

Ideal for protection, rain or shine, against weatheringand fading. Double layer cover for extra protection.Inner layer is made from soft anti-scratch material toprotect vehicle’s paintwork. Elastic corners for easyand secure fitting. Eyelet for wheel lock to be fitted.Supplied in a storage bag.

Model No: Size:MCS 1830 x 890 x 1200mmMCM 2320 x 1000 x 1250mmMCL 2460 x 1050 x 1270mm

Model No. SEE BELOW

B

D

D

Section 20 Car, Caravan & Motorcycle Covers 705

Section 21Safety Products707 Eye & Head Protection709 Solar Powered Welding Helmets710 Hand Protection & Workwear713 Knee & Ear Protection714 Respiratory Protection & Workwear716 Eye Wash & First Aid Kits717 Fire Extinguishers

J K L

Safety Over-Spectacles

BSEN166/F - Clear polycarbonate lightweightspectacles which may be worn over prescriptionspectacles. Ideal visitor’s spectacles.

DModel No. SSP301

D

Safety Goggles - Direct Vent

BSEN166/B - Clear polycarbonate safety lens withdirect ventilation in goggle frame.

JModel No. SSP1

Safety Goggles - Indirect Vent

BSEN166/B349 - Clear polycarbonate, non-mist lens.Indirect ventilation in goggle frame.

KModel No. SSP2E

Deluxe Safety Goggles - IndirectVent

BSEN166/1B - Designed with a wide-angle curvedlens to enhance visibility . Adjustable headband andsoft PVC frame provide added comfort. Indirectventilation to frame. Conforms with CE standards.

LModel No. SSP2

Safety Spectacles

BSEN166/F - Clear polycarbonate, abrasion resistantlenses. Integrally moulded side and brow protection.

E Safety Spectacles - Aviator Style

BSEN166/F - Clear polycarbonate, abrasion resistantlenses. Super-light safety frames with wire side armsfor a snug fit. Shields on side-arms.

FModel No. SSP27

E F

Safety Spectacles - Disposable

BSEN166/F - Lightweight spectacles. Ideal asjobber’s or visitor’s spectacles. Side arms with built-inventilated shields.

AModel No. SSP29

A

Model No. SSP3

Adjustable Safety Spectacles

BSEN166/FT - W raparound, clear , anti-scratch,polycarbonate lens. Adjustable-length nylon arms fora snug fit. Tested to particle impact at 45m/s.

CModel No. SSP44


BSEN166/F - W raparound, amber lens providesimproved contrast enhancement. Comfortablesilicon nose bridge and pre-set sports arms.

HModel No. SSP46

H

Anti-Glare Safety Spectacles

BSEN166/F - Shaded, abrasion resistant, wraparoundlenses. With comfortable silicon nose bridge and pre-set sports arms.

IModel No. SSP45

I

Clear Safety Spectacles

BSEN166/F - W raparound, clear , anti-scratch,polycarbonate lens. Ideal as DIY or visitorsspectacles.

BModel No. New SSP441

B


BSEN166/F - W raparound, amber , anti-scratch,polycarbonate lens. Amber lens provides improvedcontrast enhancement.

GModel No. New SSP461

G

C

Section 21 Eye Protection 707

Welding Headshield

BSEN175, CE - American style helmet with 4-1/4” x 2-1/4” shade 10 lens. Comfortable headband with non-slip quick release mechanism.

KModel No. SSP101

K

A

Brow Guard with Full Face Shield

BSEN166/B39 - Ratchet adjustable headband withbrushed nylon comfort band. Competitive quality forautomotive, agricultural and industrial applications.Replacement Visor:Model No: Type:SSP11E/R Clear

AModel No. SSP11E

Deluxe Brow Guard with FullFace Shield

BSEN166/B39 - Ratchet adjustable headband with frontand back padding for extra comfort. Premium quality forautomotive, agricultural and industrial applications.Replacement Visor:Model No: Type:SSP11/1R Clear

BModel No. SSP11

B C

Brow Guard with Full Grille FaceShield

BSEN166/1731 - Ratchet adjustable headband withbrushed nylon comfort band. Competitively priced,general-purpose face shield.Replacement Visor:Model No: Type:SSP11G/R Grille

CModel No. SSP11G

Deluxe Welding Headshield

BSEN175, BSEN169 - Deluxe headshield suppliedwith shade 10, safety and anti-spatter lens.Comfortable and lightweight. Accepts standard 4-1/4” x3-1/4” lenses.

LModel No. SSP10

Deluxe Hand-Held Welding Mask

BSEN175, BSEN169 - Deluxe mask, supplied withshade 9, safety and anti-spatter lens. Acceptsstandard 4-1/4” x 3-1/4” lenses.

JModel No. SSP9

J L

G

Gas Welding Goggles

Shade 5 welding lens with indirect ventilation in goggleframe. Suitable for gas welding. Conforms to EN175 &EN169.

GModel No. New SSP5E

Deluxe Gas Welding Goggles

Shade 5 deluxe welding lens with indirect ventilationin goggle frame. Suitable for gas welding. Conforms toEN175 & EN169.

HModel No. New SSP5D

H

Hand-Held Welding Mask

Standard economy composite mask with shade 12lens.

IModel No. New SSP82

I

E

Safety Helmet

BSEN397 - Fully adjustable internal harness andplastic cradle for extra comfort.Optional Chin Strap: SSP17CS

EModel No. SSP17

Safety Baseball Bump Cap

Baseball bump cap with solid internal cover for protectionagainst knocks and grazes. Adjustable strap suits allsizes. Convenient short peak design, better suited forworking in and around vehicles. Internal padding andventilation for added comfort. Conforms to EN812.

DModel No. New SSP16

D F

Gas Welding Goggles with Flip-UpLenses

BSEN175, BSEN169 - Clear polycarbonate safety lenses withshade 5 flip-up lenses. Indirect ventilation in goggle frame.

FModel No. SSP6

Section 21 Eye & Head Protection708

Welding Helmet Solar PoweredShade 11

High quality shade 1 1 lens with large viewing areamanufactured and tested to BSEN379. Fully automaticswitching from light to dark on striking arc. Fitted withsolar power panel - no batteries required. Deluxecontoured helmet design approved to BSEN175 givesfull neck protection and protects lens from scratchingwhen helmet is laid down. Comfortable headband andnon-slip quick release ratchet mechanism. Suitable forMIG and arc welding.

Shade Active: 11Shade Inactive: 3Viewing Area: 98 x 47.5mmUV/IR Protection YesOperating Time Light/Dark: 0.05msTemperature Range: -10°C to +70°CPower: Solar Cells

BModel No. New PWH199

B C

ClearVision® Welding HelmetSolar Power Variable Shade 9 - 13

High quality variable shade 9-13 lens manufacturedand tested to BSEN379. Fully automatic switchingfrom light to dark on striking arc. Fitted with solar powerpanel - no batteries required. Features sensitivity andspeed controls for switching light to dark. This preventsarc eye when welding at high power whilst stillproviding fast switching for tack welding. Deluxecontoured helmet design approved to BSEN175 givesfull neck protection and protects lens from scratchingwhen helmet is laid down. Comfortable headband andnon-slip quick release ratchet mechanism. Suitable forMIG, TIG and arc welding.

Shade Active: 9-13 VariableShade Inactive: 3Viewing Area: 98 x 38mmUV/IR Protection: YesOperating Time Light/Dark: 0.05msTemperature Range: -5°C to +55°CPower: Solar Cells

CModel No. PWH599

SHADE 9-13 VariableSHADE 11

F

Leather Welder’s Gauntlets - Pair

BSEN388, BSEN407 - Gauntlets of fer superiorprotection from spatter, heat and radiation. Comfortable,durable and preferred by the professional welder.

G

GModel No. SSP141

TIG Welding Gauntlets - Pair

BSEN388, BSEN407 - Quality goat skin TIG weldingleather gauntlets with 160mm split cow leather cuf f.330mm Length.

H

HModel No. SSP142

General Purpose LeatherGauntlets - Pair

BSEN12477:2001 Type A - Suitable for a variety ofapplications where extra cover is required around thewrist and the lower forearm.

FModel No. SSP14

Spark Proof Welding Blanket

Neoprene coated glass fibre blanket tested to BS476 Pt.1,Pt.7, Pt.20 and UK building regulations Class 0. Protectsagainst the spray of sparks from welding and cutting.Size: 1800 x 1300mm

EModel No. SSP23

E


Welding helmet with infinitely adjustable shade controlbetween 9 and 13. Complies to CE & DIN standards.Fully automatic switching from light to dark on strikingarc. Shade is selected by large rotary knob on side ofhelmet. Solar panel power supply - no batteriesrequired. Features sensitivity and delay controls forswitching light to dark. Deluxe contoured helmet withfully adjustable headband with front pad for addedcomfort. Suitable for MIG, TIG and arc welding.

Shade Active: 9-13 VariableShade Inactive: 4Viewing Area: 98 x 48mmOperating Time Light/Dark: 0.1msStoring Temperature: -5°C to +55°CTemperature Range: -20°C to +70°CPower: Solar CellsWeight: 420g

AStock Code New S0825

A


High quality infinitely variable shade 9-13 lensmanufactured and tested to BSEN379. Fully automaticswitching from light to dark on striking arc. Fitted withsolar power panel, no batteries required. Featuresinfinitely adjustable sensitivity and speed controls forswitching light to dark. This prevents arc eye whenwelding at high power whilst still providing fastswitching for tack welding. Deluxe contoured helmetdesign approved to BSEN175 gives full neckprotection and protects lens from scratching whenhelmet is laid down. Comfortable head band andnon-slip quick release ratchet mechanism. Suitable forMIG, TIG and arc welding.Shade Active: 9-13 VariableShade Inactive: 4Viewing Area: 98 x 47.5mmUV/IR Protection YesOperating Time:Light/Dark: 0.05msTemperature Range: -5°C to +55°CPower: Solar Cells

DModel No. New PWH699

D

SHADE 9-13 Variable

SHADE 9-13 Variable

Solar Powered

Solar Powered Solar Powered Solar Powered

Section 21 Solar Powered Welding Helmets 709

Extra-Heavy-Duty Rigger’sGloves Chrome Palm - Pair

Extra-heavy-duty gloves for professional use.Manufactured from top quality hide with strong stitchingand padded palm.

CModel No. SSP131

C

Rigger’s Gloves Hide Palm Pair

Recommended for heavy use. These gloves usequality materials which are strong yet flexible.

BModel No. SSP13

B

Rigger’s Gloves Chrome Palm Pair

Strong stitching, a generous fit and quality materialsmake this an ideal glove for farm and general purposeindustrial use.

AModel No. SSP12

A

Latex Disposable Gloves Lg/XLgPack of 100

101 Uses around the workshop. Provides excellentprotection whilst being light and flexible. Supplied indispenser box of 100 ambidextrous gloves. Silicon-freeand dusted for easy donning.

DModel No. SSP24

D E

G

Fingerless Vibration AbsorbingSafety Gloves - Pair

Fingerless style with stretch poly-cotton L ycra® liningfor optimum dexterity and comfort. V isco-elasticpolymer reduces the ef fect of vibration and impactagainst the palm. Designed for use with impact andother similar tools. CE Approved. Size: Large.

GModel No. SSP42

PVC Chemical HandlingGauntlets - Pair

PVC coating on a cotton liner . 355mm Cuffed glovesgive extra protection to the user. Ideal for industrial andagricultural applications. CE Marked and conforms toBSEN388 CAT 2.

KModel No. SSP32

Nitrile Knitted Wrist Gloves - Pair

Nitrile coating on quality jersey liner . Heavy-dutygeneral-purpose gloves designed to protect againstthe dangers of cuts and punctures. Manufactured toCE regulations and conforms to BSEN388 CA T 2.

LModel No. SSP35

K

PVC Chemical Handling GlovesKnitted Wrist - Pair

Knitted wrist waterproof gloves with PVC coating forprotection against a wide range of liquids includinginsecticides. Sanitised liners keep gloves fresher forlonger. CE Marked and conforms to BSEN388 CAT 2.

JModel No. SSP31

J L

Anti-Slip Handling Gloves - Pair

BSEN388 - Spun nylon glove with interlocking criss-cross coating. Ideal for handling cartons, glassand other items with a sheer finish.

EModel No. SSP33

PVC Anti-Slip Nylon KnittedGloves - Pair

Nylon knitted gloves with PVC dots on palm for positivegrip. Ideal for handling cartons, glass and other objectswith a sheer finish. Conforms with CE standards.

FModel No. New SSP51

F

Latex Knitted Wrist Gloves - Pair

Knitted gloves with wrinkled latex coating providingexcellent grip. Ideal for handling cartons, glass andother objects with a sheer finish. Conforms to CEstandards.


PU Coated Nylon Knitted GlovesPair

Nylon knitted gloves with a PU coating. Ideal fordelicate work such as electronics testing, automotiveassembly and precision engineering applications.Conforms with CE standards.

HModel No. New SSP50

IH

Section 21 Hand Protection710

D

PowerGlove® Mechanic’s Gloveswith Integral LED - Pair

Close fitting gloves suitable for professional workshopuse. Left-hand glove fitted with LED light on back ofindex finger for instant illumination wherever andwhenever required. Automatic switch of f after eightminutes prevents accidental battery drain. StretchSpandex® glove back for added comfort with hook-and-loop wrist strap. Washable materials.

Model No: Size:SSP900M MediumSSP900L LargeSSP900XL X-Large

Cell Qty x Type: 2 x CR2016 3V Lithium (supplied)


E

Mechanic’s Gloves SyntheticPalm with Tactouch - Pair

Close fitting gloves suitable for professional workshopuse. Synthetic palm with Tactouch finish for fine controland sure grip. Suitable for use with air poweredworkshop tools. Stretch Spandex ® glove back foradded comfort. Washable materials.

Model No: Size:MG801M MediumMG801L LargeMG801XL X-Large


B

Mechanic’s GlovesPadded Synthetic - Pair

Close fitting gloves suitable for professional workshopuse. Double layer synthetic leather palm and twin layerSpandex® back. Palm is padded with cushion pointsgiving added protection against vibration - ideal for usewith air powered workshop tools. Neoprene knuckleprotection. Hook-and-loop wrist strap. Washable materials.Model No: Size:MG800M MediumMG800L LargeMG800XL X-Large


A

C

Mechanic’s Gloves Super-Soft Leather - Pair

Genuine deer skin leather palm gives superior fit andfeel. Suitable for use with air powered workshop tools.Two-layer Stretch Spandex ® back and superiorneoprene knuckle protection for added comfort. Hook- and-loop closure.



F

Mechanic’s Tipless Gloves - Pair

Two half-fingered design ideal for handling small nuts,bolts and washers. Sweat wipe on thumb plus pre-curved fingers for great fit and grip. StretchSpandex® back for comfort. Hook-and-loop closure.



D

E

Mechanic’s GlovesAnti-Collision - Pair

Close fitting gloves suitable for tyre bay andprofessional workshop use. Moulded TPU hard shellknuckle protection and PVC on fingers aid againstexcess shock and vibration. Twin layer stretchSpandex® glove back for added user comfort.Synthetic palm with leather sections and silicone stripson fingers offer fine control and a sure grip. Hook-and-loop wrist strap. Washable materials.

Model No: Size:MG802M MediumMG802L LargeMG802XL X-Large

CModel No. New SEE BELOW

C

Section 21 Hand Protection 711

Polo Shirts

High quality fabric with ribbed collar . Ideal asworkshop, warehouse or casual wear . Relaxed,comfort fit. Available in Large and X-Large sizes.

Model No: Material: Size:PS06L 65% Polyester/35% Cotton Large/46”PS06XL 65% Polyester/35% Cotton X-Large/48”


F

E

Waterproof Jackets

Contemporary lightweight waterproof jackets. Full lengthzip/button design with inner adjustable drawstring. Collarwith soft fleece lining. Multiple zipped pockets. Halfelasticated, hook-and-loop adjustable cuffs. Fully linedwith hanging loop. Available in Large and X-Large sizes.

Model No: Material: Size:JK06L 100% Polyester Large JK06XL 100% Polyester X-Large


Fleece Jackets

Soft durable fabric for warmth and comfort. Zipped neckto control ventilation. Double fabric collar , elasticatedcuffs and hemmed bottom with drawstring. Relaxed,comfort fit. Available in Large and X-Large sizes.

Model No: Material: Size:FJ06L 100% Polyester Large FJ06XL 100% Polyester X-Large


D

G

Knitted Hat

100% Acrylic knitted hat. One size.

GModel No. SH06

Baseball Cap

Baseball cap with adjustable strap to suit all sizes.

HModel No. New SH08

H

Safety Baseball Cap

Baseball cap with solid internal cover for protectionagainst knocks and grazes. Adjustable strap suits allsizes. Convenient short peak design, better suited forworking in and around vehicles. Internal padding andventilation for added comfort. Conforms to EN812.


I

Nitrile Gauntlets - Pair

355mm Heavy-duty nitrile gauntlets designed to copewith thinners and similar aggressive liquids. CE Markedand manufactured to CAT 3 BSEN388, 407 and 374.

AModel No. SSP34

A B

Shot Blasting Gauntlets - Pair

CE Approved protection for hands, wrists andforearms. Suitable for all types of shot/grit blasters.Model No: Length:SSP40 460mm SSP41 585mm


Kevlar® Hot Sleeves

Manufactured to CAT 2 BSEN388 and BSEN407 from100% DuPont Kevlar ®. Designed for use in enginebays to prevent cuts to forearms and burns fromexhausts and other hot components. Thumb slotdesign ensures sleeve will stay in position.Model No: Length:SSP36 355mm SSP37 460mm


C

Section 21 Hand Protection & Work Wear712

Ear Defenders

Lightweight yet rugged construction of fering protectionto BSEN352.1. SNR rating 27dB. Adjustable swivel cupsfor optimum comfort and safety. Fully approved to protectagainst high noise levels in most working environments.

FModel No. SSP18

F G

C

Ear Defenders - Disposable

BSEN352.2 - Pair of single use, disposable ear insertsprovide comfortable protection from noise.

CModel No. SSP18D

Ear Defenders - Folding Type

Lightweight yet rugged construction offering protectionto BSEN352.1. SNR rating 30dB. Adjustable swivelcups for optimum comfort and safety. Arms fold in foreasy storage. Fully approved to protect against highnoise levels in most working environments.

GModel No. SSP18F

Electronic Ear Defenders

Lightweight yet rugged construction offering protectionto BSEN352-1. Adjustable swivel cups for optimumcomfort and safety. Fully approved to protect againsthigh noise levels in working environments. Built-inmicrophone amplifies low level sounds and attenuatesnoise over 85dB. LED power indicator and on/of fswitch with volume control.Attenuation: Over 85dBBatteries: 2 x AA (not included)

HModel No. SSP18E

H

H

B

Rubber Knee Pads - Pair

General purpose cellular rubber knee pads. Nylonsecuring straps. Supplied in pairs.

AModel No. SSP43

A

Heavy-Duty Gel Knee Pads - Pair

Anti-compression gel foam gives maximum cushioningfor added comfort. Hard-wearing composite front coverfor extended life with an anti-slip grip design. Large hook-and-loop single strap for a comfortable fit.

BModel No. SSP47

B

I

Ear Defenders - Disposable Box of 200 Pairs

BSEN352.2 - Pack of 200* pairs, disposable earinserts provide comfortable protection from noise.*Approximate quantity.

DModel No. New SSP18DPK

D

Corded Ear Plugs

Triple flange design manufactured from a soft pliablematerial providing a comfortable fit. Corded forconvenient carrying and helps prevent loss of plugs.

EModel No. New SSP18DC

E

Clip-On Ear Defenders

Robust construction manufactured to BSEN352.3,offering protection against high noise levels in mostworking environments. Fully adjustable for optimumcomfort and safety . Suitable for use with Model No.SSP17 Safety Helmet and other market brands.

IModel No. New SSP17ED

I

Section 21 Knee & Ear Protection 713

WARNING - None of the kits on this page filter out carbon monoxide or othertoxic gases. For air quality consult BS4275, 1997. Please monitor andmaintain a protective programme in accordance with the statutory regulations.

BODY SHOPSee pages 468 to 472for our completerange of Spray Guns.

Protection from Isocyanate Based Paints

To provide respiratory protection against these lethal fumes, we recommend theSSP200K which uses clean, breathable air drawn from a source outside thecontaminated area. The coalescing filter removes particulate out of the airstreamand removes moisture. At the belt, the air is filtered through a carbon element toremove any remaining odour and then clean, dry air is blown into the mask.Couplings used on the air hose are incompatible with regular couplings to preventcross-contamination with hoses used for air tools. The SSP200 Air-fed V isorrequires 6 to 7cfm of air for safety. Please note that a spray gun powered from thesame belt pack will add another 9 to 12cfm to the total cfm figure. Please check thefree air rating on your compressor before purchase of any kit.

Complete Air-Fed Breathing System

A full kit of equipment manufactured to BSEN270 to provide a protection factor ofAPF40. Protects against the damaging ef fects of isocyanates in modern paints.Includes complete head set with acetate visor. Waist belt assembly with regulator,colour change carbon filter element to indicate filter change and flow indicator. Wall-mounting coalescing filter. 10mtr Low toxic hose with leader hose and a complete setof couplings.

AModel No. SSP200K

Coalescing Filter

Wall-mounting filter designed to remove particulate andmoisture from the air supply. 1/2”BSP Female fitting.

EModel No. SSP21X

Coalescing Filter Element

Replacement filter for SSP21X coalescing filter ,included in SSP200K kit.

FModel No. SSP21/2/CX

Activated Carbon Filter Element

Replacement activated carbon filter element forSSP200K, SSP200, and SSP25 belt assemblies.

GModel No. SSP20/2/C

Visor & Belt Assembly

Visor and belt pack assembly for the SSP200K kit. Replacement Outer Visor Covers: (Pack of 10) SSP20/1

BModel No. SSP200

A

Half Mask & Belt Assembly

Manufactured to BSEN270, to provide a protection factor of APF20. Not suitablefor use with isocyanates paints. Includes complete half mask with circulation valveand adjustable head strap, Improved waist belt assembly with regulator , colourchange carbon filter element to indicate filter change and flow indicator. Will requirepurchase of wall mounting coalescing filter, 10mtr low toxic hose with leader hoseand set of couplings for use.

CModel No. SSP25

Low Toxic Hose Kit

10mtr Low toxic hose with “Y” coupling designed foruncontaminated breathing. Short leader hose forconnection to spray gun with fittings.

DModel No. SSP20H

B C

D

E

F

G

Section 21 Respiratory Protection714

Section 21 Work Wear 715

General-Purpose HoodedCoveralls

A strong, generous cut, general-purpose coverall. Idealfor a multitude of jobs from changing an oil filter togeneral janitorial duties. Elasticated cuffs, ankles andhood ensure a snug fit. Competitively priced.Model No: Size:SSP267-L LargeSSP267-XL X-Large

E

Waterproof Pressure WashingSuit

Green PVC hooded waterproof suit with full lengthcovered zip. W elded seams, button fitting onankles/cuffs and stringed hood. One size only.

FModel No. SSP268

Welding Protection

Comfortable leather welding apron with ties.Height: 900mmWidth: 600mm

EModel No. SSP/LWA

F

High Visibility Work Wear

All our high visibility clothing complies with EN471safety legislation. Vests are ideal for general use andare made from hard-wearing material. Polyesterjacket is fully lined and manufactured with price inmind. W aterproof trousers provide additionalprotection from rain and traffic spray.

G I-

G

High Visibility Over-Trousers

Waterproof trousers provide protection from rain andtraffic spray.Model No: Size:SSPHVT-M MediumSSPHVT-L Large


High Visibility Jackets

Competitively priced fully lined high visibility polyesterjacket.Model No: Size:SSP/HVN-L LargeSSP/HVN-XL X-Large


High Visibility Vests

Ideal for general use and are made from hard-wearing material.Model No: Size:SSPHV-L LargeSSPHV-XL X-Large



Protective Hooded Coverall

Breathable hooded coverall of fers protection againstfine particles and spray mist. Ideal for use in the bodyshop. Generously cut with elasticated cuffs, ankles andhood plus reliable zipper.Model No: Size:SSP265-L LargeSSP265-XL X-Large


Disposable Dust Cup Mask Pack of 50

Lightweight cup style comfort mask. Metal band formstop of mask securely around nose for comfortable fit.Pack of 50 masks.

Model No. SSP15D

Disposable Welder’s Cup MaskPack of 10

Protects from the hazards of welding fumes.Exhalation valve keeps wearer cool and of fers lowbreathing resistance - even behind a welding visor .Manufactured to BSEN149 FFP2S. Pack of 10 masks.

BModel No. SSP155DX

BA

A Paint Spray Respirator

Comfortable, non-dermatitic rubber mask with twin-strap elasticated harness and quick releasebuckle. Fitted with A1P2 filter to EN141. Replacementfilters (Pack of 2) - Model No. SSP1699/FP.

CModel No. SSP1699

C

D

Deluxe Paint Spray Respirator

Super comfort thermoplastic rubber face mask withunique extra-wide sealing surface. Low resistanceexhalation valve for easy breathing. Fully adjustablefour-point cradle suspension to ensure comfortablefacial fit. Fitted with twin A1P2 filters to EN141.Replacement filter kit - Model No. SSP1604FP.

DModel No. SSP1604

J

KH

I

First Aid Kit - 10 Person

First Aid Kit in a durable composite case with hingedlid, folding handle and wall fixing bracket. Suitable for alow risk environment with ten or less people.

Contents: 1 x First Aid Leaflet, 20 x AssortedWash Proof Plasters, 4 x Non-Woven TriangularBandages 960 x 960 x 1350mm, 6 x MediumDressings 120 x 120mm, 2 x Large Dressing Pads180 x 180mm, 6 x Safety Pins, 10 x Alcohol-FreeCleansing Wipes, 2 x Sterile Eye Pads, 1 Pair PowderFree Vinyl Gloves

EModel No. SFA10

E


First Aid Kit in a durable composite case with hingedlid, folding handle and wall fixing bracket. Suitable for amedium risk environment with up to twenty people.

Contents: 1 x First Aid Leaflet, 40 x Assorted SterileWash Proof Plasters, 6 x Non-Woven TriangularBandages 960 x 960 x 1350mm, 9 x Medium Dressings Pads 120 x 120mm, 3 x Large DressingPads 180 x 180mm, 12 x Safety Pins, 10 x Alcohol-Free Cleansing Wipes, 4 x Sterile Eye Pads, 2 PairsPowder Free Vinyl Gloves, 1 x Wall Mounting Bracket

FModel No. SFA20

F


First Aid Kit in a durable composite case with hingedlid, folding handle and wall fixing bracket. Suitable for ahigh risk environment with up to fifty people.

Contents: 1 x First Aid Leaflet, 60 x Assorted SterileWash Proof Plasters, 8 x Non-W oven TriangularBandages 960 x 960 x 1350mm, 12 x MediumDressing Pads 120 x 120mm, 4 x Large DressingPads 180 x 180mm, 12 x Safety Pins, 20 x AlcoholFree Cleansing Wipes, 6 x Sterile Eye Pads, 3 PairsPowder Free Vinyl Gloves, 1 x W all Mounting Bracket

GModel No. SFA50

G

B

Eye Wash Station

Comprises sterile eye wash for cleaning and eye padsfor dressing. Suitable for garages, workshops and anyother environment with eye related hazards. Suppliedin a robust storage case with carry handle and wallmounting bracket.

CModel No. New EWS01

C

Compact Travel First Aid Kit

Supplied in canvas style pouch with carry handle andbelt loop. Small and compact design is suitable forglove compartments or travelling.

Contents: 1 x First Aid Leaflet, 20 x AssortedWash Proof Plasters, 1 x Non-woven TriangularBandage 900 x 900 x 1270mm, 1 x Medium Dressing, 6 x Safety Pins, 2 x Alcohol-Free CleansingWipes, 1 x Foil Blanket

DModel No. New SFA02

D

Assorted Washproof Plasterswith Storage Case 100pc

Assortment of waterproof plasters, supplied in a plasticstorage case. Handy for keeping in rollcab/topchestdrawers.

BModel No. New SSP53

B

Assorted Elastic Plasters withStorage Case 100pc

Assortment of elastic plasters, supplied in plasticstorage case. Handy for keeping in rollcab/topchestdrawers.

AModel No. New SSP52

A

Section 21 Eye Wash & First Aid Kits716

Model No: SDPE006D SDPE009D SDPE01 SDPE02 SDPE06 SCDE02 SFE06Capacity: 0.6kg 0.95kg 1kg 2kg 6kg 2kg 6ltrClass/Type: BC/Powder BC/Powder ABC/Powder ABC/Powder ABC/Powder B/CO2 AB/FoamFire Test Rating: 13B 34B 5A/34B 13A/70B 27A/183B 34B 13A/144BWorking Pressure: 7bar 9bar 12bar 15bar 12bar 56bar 12barHeight/Diameter: 303/98mm 325/102mm 340/102mm 420/135mm 540/220mm 500/165mm 540/220mmWeight: 0.9kg 1.2kg 2.2kg 3.9kg 10.1kg 5.1kg 10.1kgDischarge Duration: 6sec 8sec 8sec 11sec 18sec 9sec 38secDischarge Range: 1-2mtr 1-2mtr 2-3mtr 2-3mtr 5mtr 2-3mtr 3-4mtrWorking Temperature: -20 to +50°C -20 to +50°C -20 to +60°C -20 to +60°C -20 to +60°C -20 to +60°C +5 to +60°C

A B C D E F G

F

G

Fire Blanket

General-purpose disposable fire blanket suitable foruse in kitchens, caravans and other similarenvironments. Fully accredited to BS EN1869.Supplied in wall mounting case.Size: 1.1mtr x 1.1mtr

HModel No. SFB11

H

Fire Extinguishers

Manufactured in UK this comprehensive range ofclassified fire extinguishers are suitable for domestic,industrial and commercial use. Fully accredited to BSEN3 and Kite marked. Five year warranty on allmodels. Depending on version, ef fective on A, B, CClass fires and fires involving live electrical equipment.With the exception of SDPE006D and SDPE009D,each model is refillable and fitted with pressure gauge.All models supplied with wall mounting brackets.

Model No. SEE TABLE

A G-

A

FIRE TEST RATINGExtinguishers are tested on A or B classfires (both if suitable) to determine the rating. This is shown by a number and letter e.g. 13A. The number represents thesize of the fire which was extinguished undertest conditions. The letter shows the fireclassification that the extinguisher was tested to and is suitable for.

iB C D E

6ltr

0.6kg

DryPowder

Foam

0.95kg 1kg 2kg

2kg

6kgCarbonDioxide

H H

H H

Combustion of solidmaterials such aswood, paper, textilesetc.

YES

Smothering andcooling effect

FOAMCream

YES

Blankets fireand prevents

re-ignition

NO

NO

Foam canconduct electricity

YES/NO

Only onsmall surface

fires

BC POWDERBlue

YES

Rapidknockdown

YES

YES

YES

Rapid knockdown.Smothering effect

prevents re-ignition

ABC POWDERBlue

YES

Rapidknockdown

YES

YES

YES/NO

Only onsmall surface

fires

CARBONDIOXIDE

Black

YES

Rapid knockdown.Leaves no residue

NO

YES

Beware inconfinedspaces

FIRE CLASSIFICATION

Combustion of liquidse.g. petrol, oil, fat, paint,solvents and grease

Combustion of flammable gasese.g. propane, butane,natural gas

Fires involvingelectrical equipment

717Section 21 Fire Extinguishers

Documents

Sealey Tools - Part 2)