Se Aa 43PC - Normet · Model: MB OM 906 LA EURO IV Type: Turbo charged 6 Cyl. Power: 258HP @ 2200 r.p.m. Torque: 850Nm @1200-1600 r.p.m. Displacement: 6374 cc Alternator: 28/80 V/A

1/6

Technical data sheet100067360.0

16.12.2013

Normet Chile Ltda.Av. Chena #11000Parque industrial Puerta surSantiago - Chile

Tel : +56 (2) 29638600e-mail: [email protected]

Normet reserves the right to change this specification without further notice.

Semmco Alpha 1430PC

Features

Semmco Alpha 1430PC is a diesel hydraulic mobile concrete sprayer mounted on truck designed for tunnel profiles up to 14 m in height and 24 meters in width.

The new NSP 30 concrete pump has a theoretical maximum pumping capacity of 30 m3/h. Alpha 1430PC's accelerator dosing system uses a peristaltic pump and has a IBC tank with a total volume of 1000 liters.

Alpha 1430PC is equipped with wired remote control system for controlling boom and nozzle movements and rotation as well as accelerator dosing and concrete pump

To make manoeuvring easy in tough terrains Alpha 1430PC has four wheel drive. The truck has a 258 HP Liquid cooled turbo charged diesel engine meeting Euro IV regulations.

Equipment includes options and extra equipment.

2/6


16.12.2013




Semmco Alpha 1430PC

SPRAYBOOMAutomatic functions:• Nozzle rotationThe speed of the movements can be adjusted from the radio remote controlAll the movements are pressure compensated and have a proportional outputBoom coverage for tunnels up to 14 m x 14 m.• Boom includes a manual fixed extension of 1000mm

to enlarge the boom coverage.

CONCRETE PUMPSpray pump NSP 30Low-wear and low-maintenance double piston pump:• Pumping capacity theoretical 3 - 30 m3 / h• Pumping cylinder diameter 200 mm• Cylinder stroke 600 mm• Pumping pressure max. 50 bar• Hydraulic pressure max. 190 barHigh pumping pressure enables the conveying of stiff concreteThe pump is able to pump up to max. aggregate size of 16 mm (including crushed) and all types of fibres (max. length 60 mm) in the mixHydraulically driven agitator• Three different height configurations for the concrete

pump installation.

HYDRAULIC SYSTEMVariable displacement piston pump system withfollowing outputs:• 75 L / min for concrete pump (piston type)• 90 L / min for boom (piston type)Hydraulic oil tank capacity 340 L.Oil cooler for concrete and boom circuitReturn oil filtration 10 μmOil level IndicatorReturn filters with contamination indicator

AIR COMPRESSORDiesel driven rotary screw / single stage air copressor:• Free air delivery 10.6 m3 / min• Rated Operating pressure 8.6 barDiesel Engine: Model: Cummins 4B3.9TAA (TIER2) Power: 125HP @ 2200 r.p.m. Displacement: 4600 cc Electrical: 12V Fuel Tank: 227.1L

24 VDC ELECTRICAL SYSTEMExposed components are min. IP 65 standardWire harness (self extinguishing) with tinned wires and watertight conduits

WIRED REMOTE CONTROL SYSTEMFollowing features can be adjusted or switched on / off from the control box: • Accelerator dosing rate• Accelerator pump on / off• Concrete pump on / off / reverse• Nozzle rotation on / off• Remote control cable 15 m

ACCELERATOR SYSTEMHydraulically driven Peristaltic pumpMax. pumping pressure 7 barDosing rate 0.5...16 L / min (30 - 960 L / h)Suction line diameter 1" (25 mm)Pressure line diameter 1" (25 mm)Additive tank capacity IBC 1000 L.

CONCRETE LINEConcrete line diameter 65 mm.

WORKING LIGHTS24 VDC LED lights2 pcs on the machine front of 6700 lm2 pcs by the side of the air compressor 1300 lm2 pcs over the concrete pump 1300 lm

GREASING MANIFOLDCentralized grease fittings for:• Concrete pump

TRUCKMercedes Benz Atego 1624A 4X4:• Engine: Model: MB OM 906 LA EURO IV Type: Turbo charged 6 Cyl. Power: 258HP @ 2200 r.p.m. Torque: 850Nm @1200-1600 r.p.m. Displacement: 6374 cc Alternator: 28/80 V/A Batteries: 2X12/100 V/Ah• Transmission: Gearbox: G 85-6/6,7-0,73 Sync. Gears: 6 Front Axle: AL 3/040 D 6,1 T Rear: HL 4 / 11T• Service Brakes: System: Drum in front and rear axle. Type: Pneumatic two circuits.• Frame: Tyres: 11R22,5 Fuel Tank: 180 Lts• Performance: Max. Speed: 90 Km/h Max. Slope: 32%

Technical specification

3/6


16.12.2013




Semmco Alpha 1430PC

OTHER6 kg hand held fire extinguisherStandard symbol labels Text labels in : Spa / EngBasic tool set:• Cleaning plug• Washing ball• Rubber hose 3/4" 4 m• Suction hose 1" 4 m• Sledge hammer 800 g• Special tools for concrete pump

EXTRA WORKING LIGHTS2 pcs on the machine front of 6700 lm

GREASING SYSTEMAutomatic greasing system for the concrete pump.

Additional Equipment

4/6


16.12.2013




Semmco Alpha 1430PC

DIMENSIONSLength 8788 mmWidth 2632 mmHeight 3876 mmWheel base 3566 mmGround clearance 400 mm

TURNING RADIUSOuter 9000 mmInner 5000 mm

WEIGHTOperating 15500 kg

SIDE AND OVERVIEW 3Basic machine. Driving dimensions at job site

Dimensions

TURNING RADIUS

8788

3876

1534

2440

2632

3523

3078

3566

23°9°

R5000

R9000

5/6


16.12.2013




Semmco Alpha 1430PC

COVERAGE AREA OF SPRAY BOOM

-2m 0m 2m 4m 6m 8m 10m

-2m

0m

2m

4m

6m

8m

10m

12m

14m

-4m

Normal coverage area.

Coverage area including boom fixed extension.

6/6


16.12.2013




Semmco Alpha 1430PC

0m2m4m6m8m -2m10m

0m

-2m

2m

4m

6m

8m

10m

12m

14m

16m

COVERAGE AREA OF SPRAY BOOM

Normal coverage area.

Coverage area including boom fixed extension.

Documents

Se Aa 43PC - Normet · Model: MB OM 906 LA EURO IV Type: Turbo charged 6 Cyl. Power: 258HP @ 2200 r.p.m. Torque: 850Nm @1200-1600 r.p.m. Displacement: 6374 cc Alternator: 28/80 V/A