SD-Information on the Pressure Equipment Directive

8/8/2019 SD-Information on the Pressure Equipment Directive

1/12

SD056D/06/en/01.05

50101403

Information on the Pressure Equipment Directive

Proline Promass 80/83/84The following information relates to devices which have been examined in accordance with theguidelines of the Pressure Equipment Directive 97/23/EC.Type code

The code on the nameplate of the measuring device indicates whether the device in question has

been examined in accordance with the Pressure Equipment Directive::

Classification

The classification of the measuring device as per Art. 3 Par. 3, Cat. I/II or III is in accordance

with the PED 97/23/EC, Annex II, Tables 6 to 9..

Taking the flange-independent maximum pressure of the Promass into account, the following isthe maximum classification:

Group 1 fluids:

explosive, flammable, toxic or oxidising media

Group 2 fluids:

non-explosive, non-flammable, non-toxic and non-oxidising media

Type code Definition

Promass 80F**-P/R/S/T/2/4***********

P/R/S/T/U/W/2/4 =

Approved in accordance with Pressure

Equipment Directive, Category III

Promass 83F**-P/R/S/T/2/4***********

Promass 80M/E/I**-P/R***********

Promass 83M/E/I**-P/R***********

Promass 80H**-U/W***********

Promass 83H**-U/W***********

Promass 84F/M/I**-P/R***********

Device Application

Type Nominal

diameter

Stable gases and fluids Unstable gases

Piping for gases, steamsand liquids with a vapour

pressure > 0.5 bar

Piping for liquidswith a vapour

pressure < 0.5 bar

Group 1fluids

Group 2fluids

Group 1fluids

Group 2fluids

Promass F DN 40...100 Cat. II Cat. I Cat. II Art. 3 Par. 3 Cat. III

Promass F DN 150...200 Cat. III Cat. II Cat. II Art. 3 Par. 3 Cat. III

Promass F DN 250...300 Cat. III Cat. II Cat. II Cat. I Cat. III

Promass F (HT) DN 50/80 Cat. II Cat. I Cat. II Art. 3 Par. 3 Cat. III

Promass M DN 40...80 Cat. II Cat. I Cat. II Art. 3 Par. 3 Cat. III

Promass E DN 40...50 Cat. II Cat. I Cat. II Art. 3 Par. 3 Cat. III

Promass I/H DN 40...50 Cat. II Cat. I Cat. II Art. 3 Par. 3 Cat. III


2/12

Information on the Pressure Equipment Directive Proline Promass 80/83/84

2 Endress+Hauser

Approval number

The following approval number for the type examination in accordance with Stoomwezen B.V.

applies to all the Promass measuring systems listed: PED/B/8035592

Material load diagrams of process connections

Promass F Page 2

Promass M Page 4 Promass E Page 5

Promass H Page 7

Promass I Page 8

Material load diagrams of process connections Promass F

Promass F:

Flange connection to

EN 1092-1 (DIN 2501)

Flange material:

1.4404/316L Alloy C-22

F06-8xFxxxxx-05-xx-xx-xx-001

The values for the temperature range from +200 C to +350 C are exclusively valid for

Promass F (HT) high-temperature version.

0

10

20

30

40

50

70

60

80

90

100

[bar]

-60 -40 -20 0 20 40 60 80 100 120 140 180 200160 [C]

PN40

PN16

PN100

PN63

220 240 260 280 300 320 340

Promass F:


ANSI B16.5

Flange material:

1.4404/316L

Alloy C-22




0 0

10 145

20 290

30 435

40 580

50 725

70 1015

60 870

80 1160

90 1305

1.4404/316L,Class 300

1.4404/316L,Class 150

[bar] [psi]

-60 -40 -20 0 20 40 60 80 100 120 140 180 200160 [C]

1.4404/316L,Class 600

110 1595

AlloyC-22,Class 600

AlloyC-22,Class 300

AlloyC-22,Class 150

220 240 260 280 300 320 340


3/12

Proline Promass 80/83/84 Information on the Pressure Equipment Directive

Endress+Hauser 3

Promass F:


JIS B2238

Flange material:

1.4404/316L

Alloy C-22




0

10

20

30

40

50

70

60

[bar]

-60 -40 -20 0 20 40 60 80 100 120 140 180 200160 [C]

63K

10K

40K

20K

220 240 260 280 300 320 340

Promass F:

Tri-ClampProcess connection

The maximum process pressure for the Tri-Clamp connection is 16 bar. However, the load limit is

defined additionally by the material properties of the outer clamp used. This clamp is not includedin the scope of delivery.

# Warning!Before opening the outer clamp make sure to relieve the pressure from the pipeline!

Promass F:

Threaded union to

DIN 11864-1

Connection material:

1.4404/316L


Promass F:


DIN 11864-2

Flange material:

1.4404/316L


Promass F:

Threaded union to ISO 2853


1.4404/316L



4/12


4 Endress+Hauser

Material load diagrams of process connections Promass M

Promass M:


EN 1092-1 (DIN 2501)

Flange material:

1.4404/316L

Titan Grade 2

F06-8xxxxxxx-05-xx-xx-xx-000

0

10

20

30

40

50

PN40

PN16

70

60

80

90

100PN100

[bar]

-60 -40 -20 0 20 40 60 80 100 120 140 180 200160 [C]

PN63

Promass M:


ANSI B16.5

Flange material:

1.4404/316L

Titan Grade 2



5/12


Endress+Hauser 5

Material load diagrams of process connections Promass E

Promass E:


EN 1092-1 (DIN 2501)

Flange material:

1.4404/316L

F06-4xExxxxx-05-xx-xx-xx-000

20

30

40

50

PN40

70

60

80

90

100PN100

[bar]

-60 -40 -20 0 20 40 60 80 100 120 140 180 200160 [C]

PN63

Promass E:Flange connection to

ANSI B16.5

Flange material:

1.4404/316L


Promass E:

Tri-Clamp

Process connection


defined additionally by the material properties of the outer clamp used. This clamp is not included

in the scope of delivery.


Promass E:


JIS B2238

Flange material:

1.4404/316L



6/12


6 Endress+Hauser

Promass E:

Threaded union to

DIN 11864-1


1.4404/316L


Promass E:


DIN 11864-2

Flange material:

1.4404/316L


Promass E:

Threaded union to ISO 2853


1.4404/316L



7/12


Endress+Hauser 7

Material load diagrams of process connections Promass H

Promass H:


EN 1092-1 (DIN 2501)

Flange material:

1.4301/304

Wetted parts:

Zirkonium 702

F06-8xHxxxxx-05-xx-xx-xx-010

Promass H:


ANSI B16.5

Flange material:

1.4301/304

Wetted parts:

Zirkonium 702

F06-8xHxxxxx-05-xx-xx-xx-011

Promass H:


JIS B2238

Flange material:

1.4301/304

Wetted parts:

Zirkonium 702F06-8xHxxxxx-05-xx-xx-xx-012


8/12


8 Endress+Hauser

Material load diagrams of process connections Promass I

Promass I:


EN 1092-1 (DIN 2501)

Flange material:

1.4301/304

Wetted parts:

Titan Grade 9


0

10

20

30

40

50

PN40

PN16

70

60

80

90

100PN100

[bar]

-60 -40 -20 0 20 40 60 80 100 120 140 180 200160 [C]

PN63

Promass I:


ANSI B16.5

Flange material:

1.4301/304

Wetted parts:

Titan Grade 9


Promass I:


JIS B2238

Flange material:

1.4301/304

Wetted parts:

Titan Grade 9



9/12


Endress+Hauser 9

Promass I:

Tri-Clamp

Process connection


defined additionally by the material properties of the outer clamp used. This clamp is not included

in the scope of delivery.


Promass I:

Threaded union to

DIN 11864-1


Titan Grade 2

F06-8xIxxxxx-05-xx-xx-xx-001

Promass I:

Threaded union to

DIN 11864-2


Titan Grade 2

F06-8xIxxxxx-05-xx-xx-xx-002

Promass I:

Threaded union to

ISO 2853


Titan Grade 2



10/12


10 Endress+Hauser

Additional information

All measuring devices undergo a pressure unit test with at least 1.5 times the maximum pressure

rating. For more details, please refer to the 2.3 certificate provided.

If the device is delivered with detached process connections (only for Promass M), these connec-

tions have to be included in the piping pressure test.

The sensor housing protects the inner electronics and mechanics and is filled with dry nitrogen.

It does not serve as secondary containment (only for Promass E). A pressure of 5 bar for pressure

resistance can be given as guidance for the housing.

# Warning!In case a danger of measuring tube failure exists due to process characteristics, e.g. with

corrosive process fluids, a mechanical overload of the housing can occur which could lead to

a housing failure and accordingly is connected with an increased danger potential (only for

Promass E). It is therefore of high importance to clarify the compatibility of process fluid with

the measuring tube material and to observe the specified maximum process pressure.


11/12


Endress+Hauser 11


12/12

www.endress.com/worldwide

SD056D/06/en/01.05

50101403FM+SGML 6.0

Documents

SD-Information on the Pressure Equipment Directive