Sc... · Web viewDECORATION AND ORNAMENTATION - DEFINITION - PROPERTIES - TYPES OF DECORATION AND ORNAMENTATION UNIT - 07 FIBERS - CLASSIFICATION OF FIBERS - YARN TWIST TYPES - FABRIC

St. PETER’S UNIVERSITYSt. Peter’s Institute of Higher Education and Research

(Declared Under Section 3 of the UGC Act, 1956)AVADI, CHENNAI – 600 054

TAMIL NADU

B. Sc (INTERIOR DISEGN)(Code No.321)

(Effective From 2009 – 2010)(Distance Education)

Regulations and Syllabus(I &II& III YEAR)

St. PETER’S INSTITUTE OF DISTANCE EDUCATIONRecognized by Distance Education Council and

Joint Committee of UGC – AICTE - DEC, New Delhi(Ref. F. No. DEC/SPU/CHN/TN/Recog/09/14 dated 02.04.2009 and

Ref.F.No.DEC/Recog/2009/3169 dated 09.09.2009)

St. PETER’S UNIVERSITYSt. PETER’S INSTITUTE OF DISTANCE EDUCATION

Chennai – 600 054.

Code No. – 321B.Sc. (INTERIOR DESIGN)

(Distance Education)

Regulations and Syllabus(Effective from 2009 – 2010)

1. Eligibility: Candidates who have passed the Higher Secondary Examination conducted by the Government of Tamilnadu, or any other examination recognized as equivalent thereto are eligible for admission to Three Year B.Sc Programme in interior design.2. Duration: Three Years.

3. Medium: English is the medium of instruction and examination. 4. Methodology: The methodology of distance education includes the supply of self-instructional study materials in print format and in CD, face-to-face instruction for theory and practicals for a limited period during week ends and on holidays, provision of virtual class in phased manner, dissemination of information over e-mail, Student - Support Service at various Centres of the University, Continuous Assessment and End Assessment conducted by the University at various parts of India.

5. Weightage for Continuous and End Assessment: There is no weightage for Continuous Assessment unless the ratio is specifically mentioned in the scheme of Examinations. The End Assessment (EA) has 100% weightage.

6. Credit System: Credit system be followed with 36 credits for each Year and each credit is equivalent to 25-30 hours of effective study provided in the Time Table of the formal system.

2

7. Scheme of Examinations

First YearCode No Course Title Credit Marks

Theory EA Total109UTMT01109UHITO1

TamilHindi

6 100 100

109UEHT02 English 6 100 100109UIDT03 Elements of Designs and Decorating Styles 6 100 100109UIDT04 Floor , Ceiling Wall, Windows and Doors 6 100 100109UIDT05 Planning For Space, Colour and Lighting 6 100 100109UIDP01 Practical – Interior Design

Record6 90

10100

Total 36 600 600

Second YearCode No Course Title Credit Marks

Theory EA Total209UIDT01 Construction Techniques 6 100 100209UIDT02 Interior Furnishings 6 100 100209UIDT03 Interior Design Management 6 100 100209UIDT04 Elements Of Service and Building Protection 6 100 100209UIDT05 Elements Of Decorative Materials 6 100 100209UIDP01

Practical- II Record

6 9010

100

Total 36 600 600

Third YearCode No Course Title Credit Marks

Theory EA Total309UIDT01 Principles of Interior Designing 6 100 100309UIDT02 Interior Design Studio and Building Systems

Technology6 100 100

309UIDT03 Interior Design and Applied Art – Major Art 6 100 100309UIDT04 Communication Graphics Design and

Applied Arts on Textiles6 100 100

309UIDT05 Drawing Sculpture and Painting Interior Design

6 100 100

309UIDP01

Practical III – Interior Design Studio and Building Systems TechnologyRecord

6 90

10

100

Total 36 600 6003

BACHELOR OF SCIENCE IN INTERIOR DESIGN

First Year109UIDT03-Elements of Designs and Decorating Styles

UNIT - 01POINT - NOTHINGNESS OF THE POINT - THINGS COME OUT OF NOTHING -ABSTRACTPOINT

UNIT - 02LINE - DEFINITION - TYPES OF LINES - STRAIGHT LINES - VERTICAL LINES –HORIZONTALLINES - DIAGONAL LINES - ZIGZAG LINES

UNIT - 03PLANES / SHAPES - NATURAL SHAPES - ABSTRACT SHAPES - GEOMETRIC SHAPES –FORM - FORM AND SHAPES

UNIT - 04SIZE - TEXTURE - TYPES OF TEXTURE - VISUAL BALANCE - TEXTILE TEXTURE

UNIT - 05COLOR - CLASSIFICATION OF COLORS - PRIMARY COLORS - SECONDARY COLORS –TERTIARY COLORS - CHARACTERISTICS OF COLORS

UNIT - 06PATTERN - NATURALIST MOTIFS - GEOMETRICAL MOTIFS - UNITY GROUPING -REPORTING – GRID

UNIT - 07BALANCE - CLASSIFICATION OF BALANCE - SYMMETRICAL BALANCE – ASYMMETRICAL BALANCE

UNIT - 08MONOTONY - TYPES OF MONOTONY - MONOTONY OF SHAPE - MONOTONY COLORS -GEOMETRICAL - CONTRAST BY SHAPE - CONTRAST BY COLOR

UNIT - 09EMPHASIS - DEFINITION - PRINCIPLES OF EMPHASIS - WHAT TO EMPHASIS - HOW TO EMPHASIS - HOW MUCH OF EMPHASIS - EMPHASIS IN INTERIOR DESIGN

UNIT - 10RHYTHM - METHODS OF RHYTHM - RHYTHM THROUGH REPETITION - RHYTHMTHROUGH A PROGRESSION OF SIZES - RHYTHMIC THROUGH A CONTINUOUS LINEMOVEMENT

UNIT - 11HARMONY - DEFINITION - PRINCIPLES OF HARMONY - REPETITION - CONTRAST -TRANSITION - PROPORTION - PRINCIPLES OF PROPORTION – SCALES

UNIT - 12DECORATING STYLE - SELECTION - PROCESSING - USING PROPERTIES - WALL PAPER DESIGN - COLORING STYLE

4


First Year109UIDT04- Floor, Ceiling Wall, Windows and Doors

UNIT - 01STUDY OF FLOOR - STRUCTURE AND ARRANGEMENT GROUND FLOOR - FIRST FLOOR - JOINERIES - SUPERFICIAL WOODEN FLOOR

UNIT - 02STUDY OF WOODEN FLOOR - STRUCTURE AND ARRANGEMENT - FIXING OFSUPERFICIAL WOODEN FLOOR - TYPES OF WOODEN FLOOR

UNIT - 03CEILING STRUCTURE - PREPARATION AND FABRICATION OF CEILING STRUCTURE - CONCEPT OF SUPER STRUCTURE - FURNISHING ON WALLS

UNIT - 04DECORATIVE STYLES OF CEILING - SUSPENDED CEILING JOINT LESS - FRAME AND PANEL - STRIP - OPEN - FALSE CEILING

UNIT - 05STUDY OF TIMBER - DEFINITION - CLASSIFICATION OF TREES - STRUCTURE OF TREES - MACROSTRUCTURE

UNIT - 06A STUDY OF TREES DEFECTS - TREES DEFECTS DUE TO INSECTS - BEETLES – MARINE BEARERS - TERMITES - DEFECTS DUE TO NATURAL FORCES - DEFECTS DUE TO SEASONING

UNIT - 07QUALITY AND SEASONING OF GOOD TIMBER - SEASONING OF TIMBER – MARKETING FORMS OF TIMBER - INDUSTRIAL TIMBER

UNIT - 08STUDY OF PLY WOODS - ADVANTAGES OF PLY WOODS - USES OF TIMBER -ADVANTAGES OF TIMBER CONSTRUCTION

UNIT - 09DOORS TYPES - SPECIAL DOORS - SLIDING DOORS - SLIDING FOLDING DOOR - ROLLING STEEL SHUTTER DOORS - REVOLVING DOORS - SIDE SLIDING DOORS

UNIT - 10STEEL PLATED DOORS AND WINDOWS - METAL COVERED PLY WOOD DOORS - CORRUGATED STEEL SHEET DOORS - SWINGING DOORS - DOORS IN COMBINATION WITH WINDOWS

UNIT - 11PAINTS AND PAINTING DESIGN - CHARACTERISTICS - BASES FOR PAINTING – COLORING PIGMENTS FOR PAINTING - PROCESS OF PAINTING - PAINTING IN DIFFERENT SURFACE

UNIT – 12APPLICATION OF VARNISHES AND DISTEMPERS - CHARACTERISTICS OF COLD VARNISH - TYPES OF VARNISHES - PROCESS OF VARNISHING - PROPERTIES OF DISTEMPER – OIL VARNISHES - SPIRIT VARNISHES

5


First Year109UIDT05- Planning For Space, Colour and Lighting

UNIT - 01TYPES OF SHAPES - TEXTURE - PRINCIPLES - COMPOSITIONS - EXERCISES -BALANCING RHYTHM - PROPORTION AND CONTRAST

UNIT - 02COLOUR THEORY - DEFINITION - THE RELATION BETWEEN COLOUR & LIGHT - SEEING - FACTORS RESPONSIBLE FOR THE SENSATION OF COLOUR - LOUR SYSTEM – COLOUR SCHEME - PSYCHOLOGY OF COLOUR

UNIT - 03COLOUR WHEEL - TONES - SHADES - TINES - COLOURS SCHEMES - PSYCHOLOGY OF COLOURS

UNIT - 04COLOUR WITH TEXTURE - IMPORTANCE OF COLOUR - COLOUR PREFERENCES - DIFFERENT GROUPS OF PEOPLE AND INDIVIDUAL

UNIT - 05PRINCIPAL OF DESIGN - LOGO DESIGN - CASE STUDY - 2D COMPOSITIONS - THEME - ORGANIZATION – COMPANY

UNIT - 06DEPICTING PRODUCT OR IDEAS - SKETCHING - SIMPLE OBJECTS

UNIT - 07STUDY OF LIGHT EFFECTS - SKETCHING OF TEMPLE - MONUMENT ETC - SKETCHING OF ROAD VIEW

UNIT - 08ARTIFICIAL LIGHTING - ELECTRIFICATION - TYPES OF LIGHTING ARRANGEMENT - DIRECT LIGHTING - INDIRECT LIGHTING - DIFFUSED LIGHTING - COMPOSITE LIGHTING - CONCEALED LIGHT - VARIETY OF LAMPS

UNIT - 09LIGHTING ACCESSORIES - LIGHTING DESIGN - TYPES OF LIGHTING - POSITION - MOVEABLITLY - ADAPBILITY - ADJUSTABILITY - STATE PURPOSE DIRECTION - ARCHITECTURAL - LAYOUT OF LIGHTING

UNIT - 10RECOMMENDED VALUES OF ILLUMINATION - EMERGENCY LIGHTING SYSTEM – LIGHT SOURCE FIXTURES - TYPE OF FLUORESCENT AND SODIUM LAMPS - SOURCE OF LIGHTING COVER OF LIGHTING - PLANNING OF LIGHTING - ELECTRICAL WIRING

UNIT - 11ARCH - TECHNICAL TERMS - INTRA DOS - SOFFIT - SKEW BACK ETC

UNIT – 12

6


First Year109UIDP01- Practical- Interior Design

UNIT – 01

1.MODEL MAKING.

2.MODEL MAKING OUT OF CARD BOARD - THERMACOL ETC.

3.CLAY - CERAMIC - PLASTER OF PARIS PROCESSING TECHNIQUES OF

FORMING AND

DECORATING.

4.COLOUR PIGMENTS ETC.

5.DISPLAY OF CERAMIC AND PLASTER OF PARIS WORKS.

6.WOOD WORKING WITH WOOD.

7.WOOD JOINERY AND ITS STRENGTH.

8.WOOD POLISHING AND SURFACE FINISHING.

9.WOODCARVING.

10.BAMBOO & CANE.

11.BAMBOO AND CANE JOINERY DETAILS, ITS STRENGTH.

12.POLISH AND SURFACE FINISHES.

TYPES OF ARCHES - DISADVANTAGES OF ARCHES - CENTERING FOR ARCHES - LINTEL - CLASSIFICATION OF LINTEL

7


Second Year209UIDT01-Construction Techniques

UNIT - 01PARTITION WALL - INTRODUCTION - ADVANTAGES - REQUIREMENTS FOR GOOD PARTITION WALL - TYPES OF PARTITION WALLS – IMPORTANCE

UNIT - 02BRICK PARTITIONS - CLAY BLACK PARTITIONS - GLASS BLOCK PARTITIONS – STRAW BOARD PARTITIONS

UNIT - 03HALLOW BLOCK PARTITIONS - CONCRETE PARTITIONS - WOODEN PARTITIONS - PLASTER SLAB PARTITIONS - ASBESTOS CEMENT

UNIT - 04A GOOD STAIRCASE - INTRODUCTION - DEFINITION - REQUIREMENTS OF A GOOD STAIRCASE - CLASSIFICATION OF STAIRS

UNIT - 05TYPES OF STAIRS - STRAIGHT STAIRS - QUARTER TURN STAIRS - HALF TURN STAIRS - THREE QUARTERS TURN STAIRS - CIRCULAR STAIRS - SPIRAL STAIRS - CURVED STAIRS - BIFURCARD STAIRS

UNIT - 06INTRODUCTION - CONSTRUCTION OF STEPS - HANDRAIL - HEAD ROOM - CUP BOARD UNDER STAIR

UNIT - 07DOOR - SPECIAL DOORS - SLIDING DOORS - SLIDING FOLDING DOOR - SHUTTER DOORS - REVOLVING DOORS

UNIT - 08STEEL PLATED DOORS - METAL COVERED PLAY WOOD DOORS - CORRUGATED STEEL DOORS - SWINGING DOORS

UNIT - 09DOORS IN COMBINATION WITH WINDOWS - VENTILATIONS - M.S. SHEET DOORS – SWING DOORS

UNIT - 10ROLLING SHUTTER FIRE CHECK - WINDOW - BAY WINDOW - CABLE WINDOW - SKY LIGHT - NORTH LIGHT

UNIT - 11FLOORS - GROUND FLOOR - FIRST FLOOR - JOINERIES - SUPERFICIAL - FLOORS – TYPES OF FLOORS

UNIT - 12WOODEN FLOOR - SUPERFICIAL WOODEN FLOORS - FIXING OF SUPERFICIAL WOODEN FLOOR - TYPES OF WOODEN FLOOR - MARKET SURVEY.

1


Second Year209UIDT02-Interior Furnishings

UNIT - 01ELECTRICITY - CONSUMPTION OF ELECTRICITY - PLANNING - TRAFFIC - LAYOUT OF WIRING - SELECTION SAFETY - AESTHETICS

UNIT - 02GUIDELINES: ELECTRIC AND COMMUNICATION DISTRIBUTION SYSTEMS - IMPORTANCE - CLASSIFICATION

UNIT - 03COMPUTER SUITE - CONCEPT - ADVANTAGE - REQUIREMENT - INSTALLATION – CAVITY FLOOR - FALSE CEILING

UNIT - 04PARTITIONS AND DOORS - EMERGENCY DOOR - CAD FOR INTERIOR DESIGN -INTERCOM AND PABX SYSTEM

UNIT - 05INDIAN INTERIOR DESIGN - INTRODUCTION - INFLUENCE OF RELIGIOUS BELIEFS

UNIT - 06DECORATION AND ORNAMENTATION - DEFINITION - PROPERTIES - TYPES OFDECORATION AND ORNAMENTATION

UNIT - 07FIBERS - CLASSIFICATION OF FIBERS - YARN TWIST TYPES - FABRIC STRUCTURE - TYPES OF SELVEDGES - PROPERTIES OF FIBERS - LIST OF FIBERS

UNIT - 08CARPETS AND RUGS - CONCEPT - CARPETS AND RUGS - MACHINE MADE CARPETS - WOOD WOVEN - EMBOSSED DESIGN

UNIT - 09COIR AND LATEX - RUBBERIZED COIR - DURRIES - COIR MATCHING - HANDLOOM - POWER LOOM - DOOR WATER - LEATHER - FOAM

UNIT - 10UPHOLSTERY - PURPOSE OF UPHOLSTERY - STRUCTURE OF UPHOLSTERY

UNIT - 11CLOTH - COTTON CLOTH - JUTE CLOTH - SPIRAL SPRINGS - GUNNY CLOTH – PADDING MATERIALS - LINING CLOTH - COVERING MATERIALS

UNIT - 12DRAPERY - ESTIMATION DRAPERY - PURPOSE OF DRAPERY - DEVELOPMENT OF DRAPERY - EVOLUTION OF CURTAIN HANGING - PELMET PARTS OF DRAPERY

2


Second Year209UIDT03-Interior Design Management

UNIT - 01FURNITURE - ELEMENTS OF FURNITURE - SOFA SEATING / MALES - SOFA SEATING FEMALE - LOUNGE - CORNER LOUNGE CHAIR SEATING FOR MALE AND FEMALE - LOUNGE SEATING CLEARANCE

UNIT - 02RELATIONSHIP - RECLINING CHAIR WITH FOOT REST / MALE AND FEMALE - WALL UNIT - ACCESS BY MALE AND FEMALE - WALL MOUNTED BAR UNIT - ACCESS BY MALE / FEMALE

UNIT - 03DINNING SPACES - OPTIMUM PLACE SETTING - MINIMUM PLACE SETTING – MINIMUM TABLE WIDTH - RECTANGULAR TABLE - MINIMUM LENGTH AND WIDTH / DINNING OF SIX

UNIT - 04FURNITURE DESIGN - RECTANGULAR TABLE - OPTIMUM LENGTH AND WIDTH / DINNING OF SIX - BREAK FAST / KITCHEN TABLE - CIRCULAR TABLE FOR EIGHT – MINIMUM CLEARANCE FOR TWO BEHIND EXTENDED CHAIR - BANQUET SEATING

UNIT - 05ROOM SERVICE - SERVICE AND PASSAGE - IMPORTANCE OF ROOM SERVICE AND PASSAGE

UNIT - 06BED ROOM STRUCTURE - SINGLE AND DOUBLE BEDS - BEDROOM / VISION AND SIGHT LINES - SINGLE BED - CLEARANCE AND DIMENSION - CLEANING REQUIREMENTS

UNIT - 07DRESSING ROOM - MAKE-UP - DRESSING - TABLE DRESSER - BED CLEARANCES – ADULT BANK BEDS - FRONT ELEVATION - ADULT BANK BEDS AND ELEVATION

UNIT - 08COOKING SPACE - COUNTER AND BASE CABINETS - GENERAL CLEARANCE – CABINET REACH COMPARISONS - SINK CENTER

UNIT - 09BATHROOM STRUCTURE - BATHROOM LAVATORY - GENERAL ANTHROPOMETRIC CONSIDERATIONS - WATER CLOSE - BIDET MINIMUM SHOWER CLEARANCES – CHILL ANTHROPOMETRIC CONSIDERATIONS

UNIT - 10DESIGNING OFFICE - PRIVATE OFFICE - EXECUTIVE DESK / VISITOR SEATING – BASIC CLEARANCES - GENERAL OFFICE - BASIC WORKSTATION WITH VISITOR SEATING - RECEPTION SPACES - RECEPTIONIST WORK STATION / COUNTER HEIGHT - CONFERENCE FORMS - CONFERENCE TABLES - SQUARE AND CIRCULAR – MERCANTILE SPACES

3

UNIT - 11SEATED CUSTOMER - DESIRABLE COUNTER HEIGHT AND LOW COUNTER HEIGHT - TABLE SIZES - MINIMUM TABLE WIDTH - OPTIMUM TABLE DEPTHS - MINIMUM AND OPTIMUM DEPTHS - TABLE - CHAIR - SERVICE AISLE

UNIT - 12TEXTILES - INTRODUCTION - INDIAN INTERIOR DESIGN - INFLUENCE OF RELIGIOUS BELIEFS - DECORATION AND ORGANIZATION - CLASSIFICATION OF FIBERS – YARN TWIST - TYPES - FABRIC STRUCTURE - TYPES OF SELVEDGES - PROPERTIES OF FIBERS - LIST OF FIBERS

4


Second Year209UIDT04-Elements of Service and Building Protection

UNIT - 01CLIMATE - STUDY OF CLIMATE CONDITION - AIR TEMPERATURE - RELATION HUMIDITY - SOLAR RADIATION - IMPORTANCE OF RADIATION - PRODUCTION FROM REPLETION

UNIT - 02MEASUREMENT - METHODS OF MEASUREMENTS - SUNBATH DIAGRAM – ORIENTATION OF INTERIOR OPENINGS - CHAJJAHS ETC - TROPICAL & SUBTROPICAL CLIMATE – HOT AND DRY CLIMATE

UNIT - 03VENTILATION - TYPES OF HEAT - SHEDDING OF HEAT - MOVEMENT OF AIR CODING OF AIR - HUMIDIFICATION - MECHANICAL VENTILATION - NATURAL VENTILATION – THERMAL CONTROL - THERMAL CONDUCTIVITY - K & U VALUE - NATURAL DAY LIGHT – VISIBLE LIGHT - DESIGNING FOR DAY LIGHT - DAY LIGHT CALCULATION - DAY LIGHT FACTOR

UNIT - 04LIGHTING - COVERS & PLANNING OF LIGHT - POSITION OF LIGHTING - POSITION OF LIGHTING POINTS - STRENGTH OF LIGHT - EFFECTIVE USE LIGHT SOURCES – ARTIFICIAL LIGHT SOURCE

UNIT - 05ELECTRIC LIGHT SOURCES - DEVELOPMENT OF NON ELECTRIC LIGHT SOURCES – LAMP COLOR - DISTRIBUTION SYSTEMS - ADVANTAGES OF ELECTRIC ENVIRONMENT - PROTECTION DEVICES - CARTRIDGE FUSES - MINIATURE CIRCUIT BREAKER – EARTH PROTECTION - SAFETY - WIRING - EAR THING

UNIT - 06PLANNING - SOURCES OF WATER SUPPLY SYSTEM - TYPES OF PIPES – PLUMING SYSTEMS, TAP VALUE & COCKS - STORAGE TANK - HOUSE PLUMING - GEP-SET – DIT GAP - DOWN TAKE TAP ETC

UNIT - 07WATER SUPPLY - HOT AND COLD SUPPLY - SANITARY ENGINEERING - ANTISIMPHONAGE PIPE - SIMPHONAGE SOIL PIPE - VENT PIPE WASTE WATER PIPE – SEWER - SEWAGE DISPOSAL - WATER CARRIAGE SYSTEM & CONSERVANCY LANE SYSTEMS

UNIT - 08REFUSE DISPOSAL - TYPES OF DISPOSAL - QUALITY & QUANTITY OF REFUSE - STORAGE & SEPARATION OF DISPOSAL - REFUSE COLLECTION - RECOVERY OF REFUSE - SEPARATION OF SAWAGE - SYSTEMS OF SANITATION

UNIT - 09CONSERVANCY SYSTEM - WATER ARRANGE SYSTEMS - MERITS & DEMERITS OF CONSERVANCY AND WATER GARAGE SYSTEMS - SEPTIC TANK - CONSTRUCTION - DISPOSAL OF SEPTIC TANK SLUDGE - TREATMENT

5

UNIT - 10SOIL ADSORPTION - METHODS OF SOIL ABSORPTION SYSTEMS - PIPE & PIPE FITTING - TRAPS - REQUIREMENTS OF GOOD TRAPS - TYPES OF TRAPS - PLUMBING OPERATION - LAYOUT OF SIMPLE - DRAINAGE SYSTEM - SOAK PITS - MAN HOLES

UNIT - 11SANITARY FITTING - TYPES OF SANITARY FITTINGS - DOMESTIC STORAGE CAMPSITES - URINALS REQUIREMENTS FOR SANITARY FITTINGS - DRAINS & SERVICES – OPEN DRAINS - DRAW SECTION

UNIT - 12FIRE FIGHTING - CAUSES OF FIRE IN BUILDINGS - TYPES OF FIRE - SPREAD OF FIRE - FIRE SAFETY - FIRE ESCAPE ROTES - OPENINGS - STAIRCASE - FIRE LIGHTS – FIRE SAFETY - FIRE DISSECTION SYSTEMS - TYPES OF FIRE DETECTION - FIRE ALARM - TYPES OF EXTINGUISHERS

6


Second Year209UIDT05-Elements of Decorative Materials

UNIT - 01TREES FOR LIFE - DEFINITION - CLASSIFICATION OF TREES - SOFT WOOD AND HARD WOODS - STRUCTURE OF TREES - FELLING STRUCTURE

UNIT - 02TIMBER - DEFECTS IN TIMBER - NATURAL FORCES - QUALITIES OF GOOD TIMBER - PRESERVATION OF TIMBER - INDUSTRIAL TIMBER - ADVANTAGE OF PLY WOODS – USES OF TIMBER - INDIAN TIMBER TRACE

UNIT - 03IRON ORES - INTRODUCTION - IRON - SELECTION OF IRON ORES - MANUFACTURING OF PIG IRON - DRESSING - CALCINATIONS AND ROASTING - SMELTING - PROPERTIES OF PIG IRON - TYPES - COMPOSITION OF CAST - IRON USES OF CAST IRON - NONFERROUS

UNIT - 04METALS - MANUFACTURE - PROPERTIES - EVALUATION AS BUILDING MATERIAL – FORMS OF ALUMINUM - COBALT, COPPER, LEAD, MAGNESIUM, NICKEL, TIN AND ZINC

UNIT - 05ALLOYS - ALUMINUM ALLOYS - COPPER ALLOYS - MAGNESIUM ALLOYS - NICKEL AND STEEL ALLOYS

UNIT - 06STEEL - INTRODUCTION - MANUFACTURE OF STEEL - BESSEMER PROCESS -CEMENTATION PROCESS - CRUCIBLE STEEL PROCESS - DUPLEX PROCESS – ELECTRIC PROCESS - L.D. PROCESS - OPEN - HEARTY PROCESS

UNIT - 07PHYSICAL PROPERTIES OF STEEL - FACTORS AFFECTING PHYSICAL PROPERTIES OF STEEL - MAGNETIC PROPERTIES OF STEEL - DEFECTS IN STEEL - PROPERTIES OF MILD AND HARD STEEL

UNIT - 08GLASS - INTRODUCTION - CLASSIFICATION OF GLASS - SODA LIME GLASS – POTASH LIME GLASS - POTASH LEAD GLASS - COMMON GLASS - MANUFACTURE OF GLASS - COLLECTION OF GLASS

UNIT - 09RAW MATERIALS - COLLECTION OF RAW MATERIALS - PREPARATION OF BATCH - MELTING IN FURNACE - FABRICATION - ANNEALING - TREATMENT OF GLASS – SPECIAL VERIFIES OF GLASS

UNIT - 10PAINTS - BASES FOR PAINTS - COLORING PIGMENTS FOR PAINTS - TYPES OF PAINTS - ALUMINUM PAINT - ANTI CORROSIVE PAINT - PLASTICS PAINT EDICT PAIN TINTING ON DIFFERENT SURFACES - REPAINTINTING OLD WOOD WORK ETC

7

UNIT - 11VARNISHES - TYPES OF VARNISHES - OIL VARNISHES - SPIRIT VARNISHES -TURPENTINE VARNISHES - WATER VARNISHES - DEFECTS IN POUNDING

UNIT - 12DISTEMPER - PROCESS OF VARNISHING - PROPERTIES OF DISTEMPERS – INGREDIENTS OF DISTEMPER - PROCESS OF DISTEMPER - WALL PAPER - WHITE - WASHING – COLOR WASHING

8


Second Year209UIDP01-Practical II

UNIT – 01

1.PHOTOGRAPHY.

2.WEAVING.

3.STUDY OF DIFFERENT FABRICS USED IN INTERIORS.

4.UPHOLSTERY - LEATHER MATERIAL STUDY.

5.GLASS - STAIN GLASS - GLASS ETCHING - FUSION PROCESS - DEEP

ETCHING ETC.

6.COMPUTER APPLICATION.

7.WORKING IN 3D SPACE.

8.W.C.S - U.C.S.

9.WIRE FRAMES.

10.SURFACE TEXTURES - TECHNIQUES.

11.PRINTING - PLOTTING.

12.SMALL PROJECT.

9


Third Year309UIDT01-Principles of Interior Designing

UNIT - 01BUILDING SYSTEM (THEORY) - THE MAIN OBJECTIVE OF THE SUBJECT IS TO HELP THE STUDENT GET AN UNDERSTANDING THE VARIOUS MATERIALS AND METHOD OF INTERIOR CONSTRUCTION SO THAT THIS KNOWLEDGE CAN BE INTEGRATED WITH THE DESIGN.

UNIT - 02BUILDING / INTERIOR MATERIALS - TYPES AND USES ONLY (STONE, BRICK, TIMBER, WOOD BASED MATERIALS, PAINT / VARNISHES, CERAMICS, TILES, ARCHITECTURAL METALS LIKE STEEL AND ALUMINIMUM).

UNIT - 03BUILDING / INTERIOR CONSTRUCTION - AN INTRODUCTION TO VARIOUSCONSTRUCTION TECHNIQUES IN INTERIORS (JOINERY, ENGLISH / FLEMISH BONDS IN BRICKS, TIMBER STAIRCASE, CLADDING, DETAILS OF DOORS, WINDOWS,CUPBOARDS, PARTITIONS, FURNITURE, ARCHES, LINTELS, FLOORING, ROOFING, CEILING).

UNIT - 04MECHANICAL AND SANITARY SERVICES - I. MECHANICAL SYSTEMS: LIFTS AND ESCALATORS - II. SANITARY SERVICES - WATER SUPPLY SYSTEM WITHIN BUILDING - DRAINAGE SYSTEM FOR RESIDENCE (HOUSE DRAINAGE) - SANITARY APPARATUS.

UNIT - 05RAIN WATER HARVESTING - PURPOSE - USE - REQUIREMENT - METHODS

UNIT - 06PRINCIPLES OF INTERIOR DESIGN - I. LANDSCAPE GARDENING AND HOUSE PLANTS - FLOWER ARRANGEMENT - II. ART IN FOOD SERVICE - DIFFERENT STYLES - III. CURRENT TRENDS IN INTERIOR DESIGN.

UNIT - 07PRINCIPLES OF INTERIOR DESIGN - IV. LABOUR SAVING EQUIPMENT AND APPLIANCES - V. IMPACT OF SOCIAL AND ECONOMIC CHANGE - VI. REFINISH AND RENOVATE OLD FURNITURE - VII. BASIC HOME REPAIRS - VIII.STUDY OF FENG SHUI AND VASTU AS USED IN MODERN HOMES.

1


Third Year309UIDT02- Interior Design Studio and Building Systems Technology

UNIT - 01BUILDING SYSTEM (THEORY) - ACOUSTICS - ROOM ACOUSTICS - NOISE CONTROL WITHIN A SPACE - AUDITORIUM ACOUSTICS.

UNIT - 02PRINCIPLES OF ILLUMINATION - TYPE LIGHTING FIXTURES - LIGHTING DESIGN IN RESIDENCES - OFFICES AND STORES.

UNIT - 03AIR CONDITIONING - PRINCIPLES OF A. C SYSTEM, TYPES OF A.C., APPLICATION IN BUILDING LIKE APARTMENTS AND GUEST ROOMS, LIBRARIES, MUSEUMS AND HOSPITALS.

UNIT - 04ELECTRICAL SERVICES - ELECTRICALSYSTEM SYMBOLS USED - 3 PHASE SYSTEM - SINGLE PHASE -SIMPLE ELECTRICAL LAYOUTS.

UNIT - 05BUILDING BYE-LAWS (M.M.D.A) NO. OF HOURS.

2


Third Year309UIDT03- Interior Design and Applied Art – Major Art

UNIT - 01MINOR & MAJOR ARTS -1.METAL WORK - SHAPING OF METAL, DECORATION,DAMASCENING, ENAMELING, METAL WORK IN INDIA - B) LAMPS & VESSELS C) BIDRI D) TANJORE PLATE ENAMELING IN INDIA - 2. GLASS WARE - STAINED GLASS HISTORY DEVELOPMENT AND ITS USAGE IN MODERN INTERIORS. VARIOUS TYPES OF GLASS AND GLASSWARE.

UNIT - 02STUDY OF DIFFERENT ARCHITECTURAL STYLES - FORMS IN RELATION TO DIFFERENT PLACES IN INDIA AND THE WEST. INDIA - BUDDHIST STUPAS, VIHANAS - SOUTH INDIAN TEMPLE ARCHITECTURE - A BRIEF STUDY OF THE BRIHADESWARA I CHIDAMBARAM TEMPLES - NORTH INDIAN TEMPLE ARCHITECTURE - ORISSAN TEMPLES -WEST - EGYPTIAN - GREEK - ROMAN - EARLY CHRISTIAN - BYZANTINE - ROMANESQUE AND GOTHIC.

UNIT - 03SCULPTURAL FORMS - A) TYPES - SCULPTURE IN ROUND, RELIEF SCULPTURE AND INTAGLIO - B) MATERIALS - HARD AND PLASTIC - C) PROCESSES - CARVING, MODELING, AND CASTING, ASSEMBLAGE - D) FUNCTION - DEPENDENT OR INDEPENDENT ON ARCHITECTURE - E) SELECTION OF APPROPRIATE SCULPTURE FOR VARIOUS INTERIORS.

UNIT - 04DRAWING - PENCIL - CRAYON - PEN AND INK AND CHARCOAL.

UNIT - 05PAINTING - TRADITIONAL MEDIA - FRESCO - TEMPERA - OIL AND WATER- COLOURS - SYNTHETIC MEDIA - ACRYLIC.

3


Third Year309UIDT04- Communication Graphics Design and Applied Arts on Textiles

UNIT - 01AWARENESS OF VARIOUS GRAPHIC PROCESSES FOR STUDENTS TO FUNCTION IN ANY PUBLISHING HOUSE - - INDUSTRIAL TRAINING.

UNIT - 02TO PROVIDE THEORETICAL AND PRACTICAL KNOWLEDGE OF BASIC DESIGNPROCESSES OF ANY PUBLISHING PROCESS - INDUSTRIAL TRAINING.

UNIT - 03I PUBLISHING DESIGN - A) EVOLUTION AND HISTORY - B) ART OF THE BOOK – HISTORY EVOLUTION - C) PRINTING PROCESSES - D) TYPES - BOOKLETS, BROCHURES, FOLDERS, POSTERS.

UNIT - 04ADVERTISING - 1. A) ROLE OF A ADVERTISING IN MODERN LIFE A) HISTORY, EVOLUTION. B) DEFINITION C) ADVANTAGES AND DISADVANTAGES D) ADVERTISING APPEALS C) ADVERTISING THROUGH PRINT MEDIA F) BROADCAST MEDIA G) OUTDOOR ADVERTISING - 2. DESIGN ORIGIN AND EVOLUTION OF LOGOS - 3. COPYWRITING – AN EFFECTIVE TOOL IN ADVERTISING - 4. MARKETING - A POTENT TOOL IN ADVERTISING -FUNDAMENTAL PROCESSES - 5. TYPOGRAPHY - VARIOUS ASPECTS.

UNIT - 05PHOTOGRAPHY - CAMERA - FUNCTIONS AND USES - PHOTOGRAPHIC PROCESSES – A BASIC UNDERSTANDING.

UNIT - 06APPLIED ART ON TEXTILES - HAND PRINTING METHODS - BLOCK - STENCIL - TIE AND DYE - SCREEN PRINTING AND BATIK - STUDY OF FIGURE IRREGULARITIES AND WHAT CAN BE DONE THROUGH DESIGN AND OPTICAL ILLUTION TO MINIMISE THE EFFECT.

UNIT - 07TYPES OF EMBROIDERY - MACHINE EMBROIDERY - APPLIQUE - CUT WORK – DRAWN THREAD WORK - BREAD WORK - SEQUINS - MIRROR WORK - CROCHETING AND TATTING.

UNIT - 08VARIOUS EMBROIDERY OF INDIA - FOLK EMBROIDERY - PHULKARKI - KASUTI - KANTHA - HEER - QUILTING - SHAWLS - CHAMBA RUMAL.

UNIT - 09KNITTING - TYPES OF KNITTING - MACHINE AND HAND KNITTING - COMMON STITCHES USED IN HAND KNITTING.

4


Third Year309UIDT05-Drawing Sculpture and Printing Interior Design

UNIT - 01SCULPTURE AND PAINTING IN THE WEST - A) ANCIENT ART - 1) EGYPTAIN ART- OLD KINGDOM, NEW KINGDOM - 2) SUMERIAN ART - 3) ASSYRIAN ART - RELIEF.

UNIT - 02B) CLASSICAL ART - 1) GREEK ART - ARCHARIC PERIOD, CLASSICAL PERIOD,HELLERUISTIC PERIOD - 2) ROMAN ART - PORTRAIT SCULPTURE.

UNIT - 03C) MEDIEVAL ART - 1. EARLY CHRISTIAN ART - CATACOMBS - 2. BYZANTINE ART - MOSAICS - 3. ROMAN ESQE ART - 4. GOTHIC ART.

UNIT - 04D) RENAISSANCE ART - 1. ITALY - EARIY AND HIGH RENAISSANCE - 2. BAROQUE.

UNIT - 05NORTH - FLANDERS: ALBRECHT DURER, MATHAIS GRUNEWALD - SPAIN: EL GRECO VELASQUEZ, GOYA.

UNIT - 06HOLLAND: FRANS HALS, REMRANDT, JAN VERMEER, LITTLE DUTCH MASTERS - FRANCE: NICOLAS POUSSIN JACQUES - LOIS DAVID, ANTOIN WATHEAU, FOUNTAIN BLEU SCHOOL, DELACROIX.

UNIT - 07ENGLAND: WILLIAM HOGARTH, THOMAS GAINS BOROUHG, JOSHUA REYNOLDS JOHN CONSTABLE, WILLIAM TURNER.

UNIT - 08MODERN ART - REALISM - IMPRESSIONISM - MANET - MONET - PISARRO. POST - IMPRESSIONISM ART NOUVEAU FAUVISM - CUBISM FUTURISM - EXPRESSIONISM - SURREALISM - ABSTRACT ART - ABSTRACT EXPRESSIONISM - VISITS TO VARIOUS ART GALLERIES - EXHIBITIONS - MUSEUMS AND PLACES OF ARTISTIC VALUE.

5


Third Year309UIDP01- Practical III – Interior Design Studio and Building Systems

Technology

UNIT - 01THE MAIN OBJECTIVE OF DESIGN STUDIO IS TO ACQUIANT THE STUDENT WITH SYMBOLS AND TO IMPART NECESSARY DRAFTING SKILLS TO EXPRESS DESIGN IDEAS. TO DEVELOP THE CREATIVE POTENTIAL OF THE STUDENTS THROUGH DESIGN EXERCISE

DRAWING STUDIO:MEASURE DRAWING USE OF DRAWING INSTRUMENTS, TYPES OF LINES, LETTERING SYMBOLS, DIMENSIONING, USE OF SCALES.

PRACTICAL

1. FLOWER ARRANGEMENT.

2. TABLE SETTING.

3. SURVEY ON LATEST MATERIALS AND APPLIANCES AVAILABLE.

4. VISIT TO APPLIANCE STORES, ANTIQUE STORES & GARDENS.

5. DETAILS OF FURNITURE, MEASURES DRAWING OF FURNITURE.

6. DESIGN STUDIO:

1. EXERCISE OS DESIGN OF SIMPLE INTERIORS EXAMPLE - INTERIOR OF BEDROOMS, KITCHENS, BATHROOMS, RESTAURANTS, SHOPS, HOTEL LOBBY ETC.

2. AN INITIAL STUDY OF SIMILAR SPACE ANTHROPOMETRIC STUDY.

7. BASIC SKETCHING EXERCISES, DRAWING FROM OBJECTS, NATURE ETC.

8. STAINED GLASS PAINTING.

9. ACRYLIC PAINTING ON TABLES, POTS ETC.

10. VISITS TO CRAFT MELAS, EXHIBITIONS, GALLERIES ETC.

6

Documents

Sc... · Web viewDECORATION AND ORNAMENTATION - DEFINITION - PROPERTIES - TYPES OF DECORATION AND ORNAMENTATION UNIT - 07 FIBERS - CLASSIFICATION OF FIBERS - YARN TWIST TYPES - FABRIC