Embed Size (px)
DESCRIPTION
Â
Citation preview
Scott Levins Architecture Design PortfolioSummer Internship 2016
SCOTT LEVINS
(203) 816-1382
1100 WEST WAYNE ST
MUNCIE, IN 47303
Contact Information
Watch Expo Where the people circulate like a watchFall 2014
THIS BUILDING WAS DESIGNED TO BE A WATCH EXHIBITION SPACE. THE DESIGN WAS BASED ON A WATCH, RADIAL CIRCULATION WAS CRUCIAL TO THE DESIGN.
Circulation Diagram
Watch Expo
West Section(stair)
East Elevation North Elevation
Watch Expo
LL 1FL 2FL 3FL 4FL
Circulation Diagram
Watch Expo
Steam Engine Movement of steam through an engineFall 2014
South Elevation
THIS PROJECT IS A MUSEUM FOR THE HISTORY AND DEVELOPMENT OF THE STEAM ENGINE THROUGHOUT TIME. THE SPACES UTILIZE VARYING CEILING HEIGHTS IN ORDER TO MAKE THE PEOPLE FEEL LIKE STEAM BEING COMPRESSED INSIDE OF THE ENGINE.
Steam Engine
THE GLASS INLAID IN THE CONCRETE WALLS REPRESENTS THE GEARS AND MOVEMENT OF THE PARTS IN A STEAM ENGINE.
West Elevation
Steam Engine
THE CURVILINEAR GLASS REPRESENTS THE FLUIDITY OF STEAMS MOTION AND THE
LINEAR GLASS REPRESENTS THE MECHANICAL MOTION OF THE ENGINE.
Steam Engine
2nd Floor
1st Floor
Folding Origami structure spanning a Tokyo riverSpring 2014
TOKYO, JAPANN
OUR TASK WAS TO CREATE A FOLDING STRUCTURE THAT HOUSES A MULTI-USE BUILDING. ONE USE OF THE BUILDING IS A DRUMMER’S LOFT, THE SECOND IS A SCULPTOR’S APARTMENT, AND THE LAST SPACE IS A BOOKSTORE.
Folding
CIRCULATION DIAGRAM
NOISE DIAGRAM
NOISE REDUCTION WAS A LARGE FACTOR IN THE DESIGN. SEPARATING THE LOUD DRUMMER’S SPACE FROM
THE QUIET BOOKSTORE WAS A CHALLENGE IN THE GIVEN SPACIAL
CONSTRAINTS.
Folding
EACH OF THE THREE SPACES, ALTHOUGH SEPARATE, WRAP
AROUND EACH OTHER TO CREATE THE FORM OF THIS
BUILDING.
2nd LEVEL
1st LEVEL
3rd LEVEL
OCCUPANCY #1 - MUSICIAN OCCUPANCY #2 - SCULPTOR OCCUPANCY #3 - BOOKSTORE
Folding
SECTION B
SECTION A
SECTION B
SECTION A
Splitting Wood Exhibition Center for HardwoodSpring 2015
PROGRAM DIAGRAM
Splitting Wood
Base Concept
RIBBONS SPLITTING IN THE VARIOUS FACADES ALLUDES TO BRANCHES SPLITTING OUT OF EACH OTHER
INTERIOR PERSPECTIVE
Splitting Wood
THIS PROJECT WAS AN EXHIBITION CENTER FOR HARDWOOD. IT FEATURES
AN AUDITORIUM, EXHIBITION SPACE, MUSEUM, AND A FULLY FUNCTIONAL
MILL. THE SPACES UTILIZED HARDWOODS LIKE WALNUT AND CHERRY TO TIE THE
BUILDING TOGETHER.
1ST FLOOR PLAN
2ND FLOOR PLAN
3RD FLOOR PLAN
Splitting Wood
RIBBON DIAGRAM
Pushing the Limit Jails with new boundariesFall 2015
2ND FLOOR
1ST FLOOR
THE ISLAND DESIGN IS tO CREATE A calming
GARDEN-LIKE FEEL IN THE COMPLEX
My focus was on the Education Center in the Jail Complex
Pushing the Limit
HVAC and Structure Diagram
This jail re-approaches the justice system with one goal in mind; to create a calming environment for those in custody
Pushing the Limit
Pushing the Limit
THE materials THAT WERE CHOSEN PERMEATE
THROUGH ALL FACETS OF THIS COMPLEX
WOOD IS UTILIZED FOR THE CALMING
EFFECT NATURE HAS ON HUMANS
GLASS IS USED FOR THE ABILITY TO SEE OUT
INTO NATURE AND NOT FEEL LIKE A CAGED
ANIMAL
STONE IS INCORPORATED AGAIN, FOR THE
CALMING EFFECT NATURE PROVIDES
VEGETATION INFILTRATES ALL AREAS OF THE
COMPLEX FROM THE LIVING CHAMBERS TO
THE GARDEN
Steel Centered Connecting Gary and US SteelSpring 2016
NORTH - SOUTH SECTION
This was a group project that i did with three other classmates of mine. We designed a stewardship center in Gary, Indiana reconnecting the residents of Gary with the US Steel mill that used to employ thousands.
Steel Centered
NORTH - SOUTH SECTION
Since this building was to be owned by US Steel we wanted to utilize the materiality of steel in numerous aspects from structure to railings and roofing.
Steel Centered
UP
UP
1ST FLOOR
UP
UP
2ND FLOOR
REGENERATIVEDEGENERATIVE
REACTIVE
Steel Centered
EAST - WEST SECTION
*Group Project With Alexander Franklin, Bryan Kline, and Brittany Williams
My contribution to this project was largely with the
concept, the board design, and the renderings.
This model is an example of a double boolean curve made in rhino 5. This curve was the result of numerous geometric shapes being united into one.
This project was to design a movable wall partition that created
different lighting effects depending on the position of the
panels.
Digital Design Laser Cutting and model buildingFall 2014
This design was made by one curvilinear line that was rotated, arrayed, and offset.
Digital Design
