1-800-800-9900www.scofield.com

1-800-800-9900www.scofield.com

© 2018 Scofield, A Business Unit of Sika Corporation. © 2018 Scofield, A Business Unit of Sika Corporation.

SCOFIELD Texturetop is the superior solution for resurfacing and texturing interior or exterior concrete surfaces for commercial, industrial, or residential use in new construction or renovation. SCOFIELD Texturetop is color-matched to the full range of standard and custom colors available and can be used to restore existing interior concrete floors and exterior hardscapes, or to correct construction errors.

Colors:Available in 24 standard colors. See color chart A-132.

Packaging:Base unit - 53 lb. bag.Color pack - 2 lbs.

Coverage:One SCOFIELD Texturetop Stamp grade bag mixed with one color pack will cover approximately 24 sq. ft. to adepth of 1/4”.The amount required will vary depending on depth of installation, substrate surface profile and texture, preparation procedures, specified surface finish, and other conditions.

Ideal uses:Where depth is required for imprinting with stamp tools or embossing skins, such as LITHOTEX® Pavecrafters®.

Application:Apply with a gauge rake spreader in thicknesses from 1/8” to 3/8”.Can be textured with rollers or embossing skins.When texturing using imprinting tools or embossing skins, a release agent such as LITHOTEX Liquid Release or SCOFIELD Liquid Release SG is recommended.Achieves a compressive strength of 4,000 psi in 28 days.

Keys to success:Requires an ICRI surface profile between CSP#3 and CSP#5.Concrete substrate must be free of oils, laitance, curing compounds, or other bond-inhibiting materials.All cracks should be repaired and cured prior to application of SCOFIELD Texturetop.Place as soon as possible after mixing.All working joints in the substrate must be reproduced through the topping.

Stamp Grade

ContractorSheet

SCOFIELD® Texturetop®

SCOFIELD® Texturetop®

Stamp Grade

| Stampable Cementitious Topping |

ContractorSheet

| Stampable Cementitious Topping |

L. M. Scofield Company - A SIKA COMPANY L. M. Scofield Company - A SIKA COMPANY

SCOFIELD Texturetop is the superior solution for resurfacing and texturing interior or exterior concrete surfaces for commercial, industrial, or residential use in new construction or renovation. SCOFIELD Texturetop is color-matched to the full range of standard and custom colors available and can be used to restore existing interior concrete floors and exterior hardscapes, or to correct construction errors.

Colors:Available in 24 standard colors. See color chart A-132.

Packaging:Base unit - 53 lb. bag.Color pack - 2 lbs.

Coverage:One SCOFIELD Texturetop Stamp grade bag mixed with one color pack will cover approximately 24 sq. ft. to adepth of 1/4”.The amount required will vary depending on depth of installation, substrate surface profile and texture, preparation procedures, specified surface finish, and other conditions.

Ideal uses:Where depth is required for imprinting with stamp tools or embossing skins, such as LITHOTEX® Pavecrafters®.

Application:Apply with a gauge rake spreader in thicknesses from 1/8” to 3/8”.Can be textured with rollers or embossing skins.When texturing using imprinting tools or embossing skins, a release agent such as LITHOTEX Liquid Release or SCOFIELD Liquid Release SG is recommended.Achieves a compressive strength of 4,000 psi in 28 days.

Keys to success:Requires an ICRI surface profile between CSP#3 and CSP#5.Concrete substrate must be free of oils, laitance, curing compounds, or other bond-inhibiting materials.All cracks should be repaired and cured prior to application of SCOFIELD Texturetop.Place as soon as possible after mixing.All working joints in the substrate must be reproduced through the topping.

1-800-800-9900www.scofield.com

1-800-800-9900www.scofield.com

© 2018 Scofield, A Business Unit of Sika Corporation. © 2018 Scofield, A Business Unit of Sika Corporation.

Stamp Grade Stamp GradeSCOFIELD

® Texturetop®

SCOFIELD® Texturetop®

| Stampable Cementitious Topping | | Stampable Cementitious Topping |

L. M. Scofield Company - A SIKA COMPANY L. M. Scofield Company - A SIKA COMPANY

Prior to beginning the job, consult the appropriate Scofield Tech-Data Bulletin, SCOFIELD Texturetop Stamp Grade TD-2440.

Prior to beginning the job, consult the appropriate Scofield Tech-Data Bulletin, SCOFIELD Texturetop Stamp Grade TD-2440.

Sealing: For optimum performance and durability, SCOFIELD® Selectseal Plus™ is recommended. May also be sealed with SCOFIELD® Cureseal-W™, SCOFIELD® Cureseal-S™, CEMENTONE® Clear Sealer, or COLORCURE® Concrete Sealer.

SCOFIELD Texturetop: Creates hard, abrasion-resistant wear surfaces. Fast setting, with rapid strength gain for fast-track installation. Excellent moisture and freeze/thaw resistance. Can be stained with LITHOCHROME® Chemstain® Classic or LITHOCHROME® Tintura™ Stain. SCOFIELD Texturetop is also available in Stencil Grade and Trowel & Spray Grade.

Sealing: For optimum performance and durability, SCOFIELD® Selectseal Plus™ is recommended. May also be sealed with SCOFIELD® Cureseal-W™, SCOFIELD® Cureseal-S™, CEMENTONE® Clear Sealer, or COLORCURE® Concrete Sealer.

SCOFIELD Texturetop: Creates hard, abrasion-resistant wear surfaces. Fast setting, with rapid strength gain for fast-track installation. Excellent moisture and freeze/thaw resistance. Can be stained with LITHOCHROME® Chemstain® Classic or LITHOCHROME® Tintura™ Stain. SCOFIELD Texturetop is also available in Stencil Grade and Trowel & Spray Grade.