Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Simplex is a registered trademark owned by Simplex Cables (UK) Ltd. (SCL) is registered in The Trade Mark Registry in Great Britain and registered trade-marks of Caparo, the UK arm of the Caparo Group.
Simplex is a specialized and independent electrical component manufac-turer of cable glands, Lugs and fittings & accessories. As an ISO certified com-pany conforming to the international standards of quality and have better output yielding capacity resulting from our skillful workmanship, exquisite technique, good quality guarantee and excellent service.
The Company
The UK-based Caparo Group, founded by The Rt. Hon. Lord Paul of Marylebone, includes a global network of businesses under the Caparo name. Caparo is a diversified operation comprised of businesses that supply steel, electrical and engineering products to modern industries. Our customers are the biggest names in electrical, automotive, construction, aerospace, steel conversion and distribution, engineering and medical.
Today, we remain committed to growing and investing in our busi-nesses…building on our far-reaching heritage and culture.
INDEX
SR.NO
PRODUCT DESCRIPTION
BW CABLEGLAND
21
PAGENO.
SR.NO
PRODUCT DESCRIPTION
SHROUDS(PVC/LSHF)
1010
PAGENO.
CW CABLEGLAND
32INSULATEDCABLECONNECTORS
1112
11
A2 CABLEGLAND
43 CABLE LUGS131415
12
E1W CABLEGLAND
54LSOH SINGLEBOLD CABLECLEAT
1613
CW ALUMINUMCABLE GLAND
65LSOH DOUBLEBOLD CABLECLEAT
1714
PG NYLONCABLE GLAND
76ALUMINUMDOUBLE BOLTaCABLE CLEAT
1815
PG METALCABLE GLAND
87ALUMINUMTREFOILCABLE CLEAT
1916
FIRE RATEDCABLE GLAND
98 BI-METALLICLUGS
2017
WIPINGGLAND
109
1
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
C A
E F
B D
TECHNICAL AND ORDERING DATACable Gland Size
Cable Bedding Diameter
‘A’
Cable Overall
Diameter ‘B’
Armour Range
Across Flat ‘D’
Across Corners
‘D’
Entry Thread
‘C’
“Minimum Thread Length
‘E’
Nominal Protrusion Length ‘F’
Max Max Min Max Max Max
BW20S:SCUL 20S 11.70 16.10 0.90 1.25 22.00 24.00 M20 10 18
BW20L:SCUL 20 14.00 21.10 0.90 1.25 28.00 30.50 M20 10 22
BW25:SCUL 25 20.00 27.40 1.25 1.60 33.00 36.00 M25 10 26
BW32:SCUL 32 26.30 34.40 1.60 2.00 41.00 44.50 M32 10 28
BW40:SCUL 40 32.20 42.40 1.60 2.00 50.00 56.30 M40 10 30
BW50S:SCUL 50S 38.20 50.10 2.00 2.50 57.10 62.50 M50 15 30
BW50L:SCUL 50 44.10 55.70 2.00 2.50 65.00 70.00 M50 15 32
BW63S:SCUL 63S 50.00 62.40 2.50 2.50 76.00 82.50 M63 15 38
BW63L:SCUL 63 56.00 68.20 2.50 2.50 80.00 85.70 M63 15 38
BW75S:SCUL 75S 62.00 76.80 2.50 2.50 90.00 98.70 M75 15 40
BW75L:SCUL 75 68.00 82.90 2.50 3.15 95.00 103.70 M75 15 40
» BW type brass gland, for indoor use with all kind of Steel Wire Armoured (SWA) cable and Aluminium Wire Armoured (AWA) cable.
» Provides mechanical cable retention & electrical continuity via armoured wire termination.
» Permanently crimped, low impendence earth
termination. » Cable gland complete kit includes: brass gland,
locknut, earth tag and shroud. » Sizes M25 and lower, will contain two kits and sizes
M32 and above will include one kit.
BW CABLE GLAND
ThreadingStandardIngress Protection RatingCable TypeProtection MaterialContinuous Operating TempStandard AccessoriesOptional
MetricBS 6121:2005IP 2XSWA and AWABrass CuZn39Pb3 (CW614N) to EN12168 - 20° C to + 130° CEarth Tag, LocknutPVC or LS0H Shroud Brass Nickel Plating Upon Request
SPECIFICATIONS
BW20S:SMP
BW20L:SMP
BW25:SMP
BW32:SMP
BW40:SMP
BW50S:SMP
BW50L:SMP
BW63S:SMP
BW63L:SMP
BW75S:SMP
BW75L:SMP
2
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
C A
E F
B D
TECHNICAL AND ORDERING DATA
Part #
Cable Gland Size
Cable Overall
Bedding Cable
Diameter ‘A’
Overall Cable
Diameter ’B’
Armour Range
Across Flat ‘D’
Acros Corners
‘D’
Entry Thread
‘C’
Mini-mum
Thread Length
‘E’
Nom-inal
Protru-sion
Length ‘F’
Min Min Max Min Max Max Max
CW20S16:SCUL 20S/16 8.70 6.10 11.50 0.90 1.00 24.00 26.60 M20 10 43
CW20S:SCUL 20S 11.70 9.50 15.90 0.90 1.25 24.00 26.60 M20 10 43
CW20L:SCUL 20 14.00 12.50 20.90 0.90 1.25 30.50 33.30 M20 10 50
CW25:SCUL 25 20.00 18.20 26.20 1.25 1.60 36.00 40.00 M25 10 55
CW32:SCUL 32 26.30 23.70 33.90 1.60 2.00 46.00 51.00 M32 10 55
CW40:SCUL 40 32.20 27.90 40.40 1.60 2.00 55.00 61.00 M40 10 55
CW50S:SCUL 50S 38.20 35.50 46.70 2.00 2.50 61.00 67.00 M50 15 56
CW50L:SCUL 50 44.10 40.40 53.10 2.00 2.50 70.10 76.00 M50 15 70
CW63S:SCUL 63S 50.00 45.60 59.40 2.00 2.50 76.00 82.20 M63 15 70
CW63L:SCUL 63 56.00 54.60 65.90 2.00 2.50 80.00 86.00 M63 15 80
CW75S:SCUL 75S 62.00 59.00 72.10 2.00 2.50 90.00 99.00 M75 15 81
CW75L:SCUL 75 68.00 66.70 78.50 2.00 2.50 100.00 109.00 M75 15 96
» CW type brass cable gland for use with Steel Wire Armoured Cable (SWA).
» Single compression gland, providing mechanical cable retention and electrical continuity via armoured wire termination. Environmental seal on the outer sheath to IP 66.
» Controlled outer load retention seal. » Cable gland complete kit includes: brass gland,
locknut, earth tag and shroud. » Sizes M25 and lower, will contain two kits and sizes
M32 and above will include one kit.
MetricBS 6121:2005, EN 62444:2013IP66Steel Wire Armor (SWA)Brass CuZn39Pb3 (CW614N) to EN12168- 20° C to + 130° CEarth Tag, Locknut, Entry Thread SealPVC or LS0H ShroudBrass Nickel Plating Upon Request
SPECIFICATIONSThreadingStandardIngress Protection RatingCable TypeProtection MaterialContinuous Operating TempStandard AccessoriesOptional
CW20S16:SMP
CW20S:SMP
CW20L:SMP
CW25:SMP
CW32:SMP
CW40:SMP
CW50S:SMP
CW50L:SMP
CW63S:SMP
CW63L:SMP
CW75S:SMP
CW75L:SMP
CW CABLE GLAND
3
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
C A
E F
D
» A2 type brass cable gland for use with all types of unarmoured cable.
» Single compression gland, with displacement type seal. providing mechanical cable retention and an environmental seal on outer sheath to IP-66, 67 and 68.
» Cable gland complete kit includes: brass gland, locknut and shroud.
» Sizes M25 and lower, will contain two kits and sizes M32 and above will include one kit.
ThreadingStandardIngress Protection RatingCable TypeProtection MaterialContinuous Operating TempStandard AccessoriesOptional
MetricBS 6121:2005, EN 62444:2013IP66, 67 and 68UnarmouredBrass CuZn39Pb3 (CW614N) to EN12168- 20° C to + 130° CLocknut, Entry Thread SealPVC or LS0H ShroudBrass Nickel Plating Upon Request
SPECIFICATIONS
TECHNICAL AND ORDERING DATA
Part #
Cable Gland Size
Cable Overall Bedding Cable Diameter ‘A’;B;
Across Flat ‘D’
Across Corners
‘D’
Entry Thread ‘C’ Minimum Thread
Length ‘E’
Nominal Protrusion Length ‘F’
Min Max Max Max Metric NPT
A220S16:SCUL 20S/16 3.10 8.70 24.00 26.60 M20 1/2" 10 21
A220S:SCUL 20S 6.10 11.70 24.00 26.60 M20 1/2" 10 21
A220L:SCUL 20 6.50 14.00 27.00 29.00 M20 1/2" 10 24
A225:SCUL 25 11.10 20.00 36.00 39.90 M25 3/4" 10 26
A232:SCUL 32 17.00 26.30 41.00 45.50 M32 1" 10 27
A240:SCUL 40 23.50 32.20 50.00 54.60 M40 1 1/4" 10 28
A250S:SCUL 50S 31.00 38.20 55.00 59.00 M50 1 1/2" 15 29
A250L:SCUL 50 35.60 44.10 60.00 65.40 M50 2" 15 30
A263S:SCUL 63S 41.50 50.00 70.00 76.00 M63 2" 15 30
A263L:SCUL 63 47.20 56.00 76.00 82.30 M63 2 1/2" 15 30
A275S:SCUL 75S 54.00 62.00 85.00 92.50 M75 2 1/2" 15 32
A275L:SCUL 75 61.10 68.00 85.00 92.50 M75 3" 15 32
A2 CABLE GLAND
A220S16:SMP
A220S:SMP
A220L:SMP
A225:SMP
A232:SMP
A240:SMP
A250S:SMP
A250L:SMP
A263S:SMP
A263L:SMP
A275S:SMP
A275L:SMP
4
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
C B D
E F
A
ThreadingStandardIngress Protection RatingCable TypeProtection MaterialContinuous Operating TempStandard AccessoriesOptional
MetricBS 6121:2005, EN 62444:2013IP66All types of armoured cablesBrass CuZn39Pb3 (CW614N) to EN12168- 20° C to + 130° CEarth Tag, Locknut, Entry Thread SealPVC or LS0H ShroudBrass Nickel Plating Upon Request
» E1W type brass cable gland for use with all types of armoured cables.
» Double compression gland, providing mechanical cable retention and electric continuity via armoured wire termination.
» Environmental seal on the outer sheath to IP 66.
Inner seal provides grip to inner layer of cable and secures it against self loosing.
» Cable gland complete kit includes: brass gland, locknut, earth tag and shroud.
» Sizes M25 and lower, will contain two kits and sizes M32 and above will include one kit.
SPECIFICATIONS
TECHNICAL AND ORDERING DATA
Part #
Cable Gland Size
Cable Over-all Bedding Cable Diam-
eter ‘A’
Overall Cable Diameter’b’
Armour Range
Across Flat ‘D’
Across Corners
‘D’
Entry Thread
‘C’
“Min-imum
Thread Length
‘E’”
Nom-inal
Protru-sion
Length ‘F’Min Max Min Max Min Max Max Max Metric NPT
E1W20S16:SCUL 20S/16 3.10 8.70 6.10 11.50 0.90 1.00 24.00 26.60 M20 1/2" 10 63
E1W20S:SCUL 20S 6.10 11.70 9.50 15.90 0.90 1.25 24.00 26.00 M20 1/2" 10 63
E1W20L:SCUL 20 6.50 14.00 12.50 20.90 0.90 1.25 30.50 33.30 M20 1/2" 10 67
E1W25:SCUL 25 11.10 20.00 18.20 26.20 1.25 1.60 37.50 40.50 M25 3/4" 10 78
E1W32:SCUL 32 17.00 26.30 23.70 33.90 1.60 2.00 46.00 51.00 M32 1" 10 78
E1W40:SCUL 40 22.00 32.20 27.90 40.40 1.60 2.00 55.00 61.00 M40 1 1/4" 10 83
E1W50S:SCUL 50S 29.50 38.20 35.50 46.70 2.00 2.50 61.00 66.50 M50 1 1/2" 15 78
E1W50L:SCUL 50 35.60 44.10 40.40 53.10 2.00 2.50 70.10 77.00 M50 2" 15 81
E1W63S:SCUL 63S 40.10 50.00 45.60 59.40 2.00 2.50 75.00 83.20 M63 2" 15 93
E1W63L:SCUL 63 47.20 56.00 54.60 65.90 2.00 2.50 80.00 88.00 M63 2 1/2" 15 95
E1W75S:SCUL 75S 52.80 62.00 59.00 72.10 2.00 2.50 89.00 101.60 M75 2 1/2" 15 103
E1W75L:SCUL 75 59.10 68.00 66.70 78.50 2.00 2.50 99.00 111.10 M75 3" 15 110
E1W20S16:SMP
E1W20S:SMP
E1W20L:SMP
E1W25:SMP
E1W32:SMP
E1W40:SMP
E1W50S:SMP
E1W50L:SMP
E1W63S:SMP
E1W63L:SMP
E1W75S:SMP
E1W75L:SMP
E1W CABLE GLAND
5
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
C A
E F
B D
» CW type aluminium cable gland for use with Aluminium Wire Armoured Cable (AWA).
» Single compression gland providing mechanical cable retention and electrical continuity via armoured wire termination.
» Environmental seal on the outer sheath to IP 66.
» Controlled outer load retention seal. » Environmental friendly, aluminium alloy used for
extra strength & performance. » Cable gland kit includes: aluminium gland, locknut,
earth tag and shroud.
TECHNICAL AND ORDERING DATA
Part #
Cable Gland Size
Cable Bedding Diameter
‘A’
Overall Cable Diameter ‘B’
Armour Range
Across Flat ‘D’
Across Corners
‘D’
“Minimum Thread Length
‘E’
Nomi-nal Pro-trusion Length
‘F’Max Min Max Min Max Max Max
ALCW50S:SCUL 50S 38.20 35.20 46.70 2.00 2.50 60.00 66.50 15 56
ALCW50L:SCUL 50 44.10 40.40 53.10 2.00 2.50 70.10 78.60 15 70
ThreadingStandardIngress Protection RatingCable TypeProtection MaterialContinuous Operating TempStandard AccessoriesOptional
MetricBS 6121:2005, EN 62444:2013IP66Aluminium Wire Armoured (AWA)6082 Extruded Aluminium Alloy-20° C to +130° CEarth Tag, Locknut, Entry Thread SealPVC or LS0H Shroud
SPECIFICATIONS
CW ALUMINIUM CABLE GLAND
ALCW50S:SMP
ALCW50L:SMP
6
HG
L
D1
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these without
PG NYLON CABLE GLAND
Material:Hermetic seal:O-Ring:Working temperature:
Color:
PA (NYLON), UL 94 V-2NBR, (EPDM Upon Request)EPDM-40C° to 100C° in static state, Instantaneous heat resistance up to 120C°,-20C° to 80C° in dynamic state, Instantaneous heat resistance up to 100C°Grey, Black, other colors customized.
SPECIFICATIONS
TECHNICAL AND ORDERING DATAPart # Thread H GL
RAL7035 D1 mm mm mm mm
P0707 PG 7 3-6,5 21 8 15
P0705 PG 7 2-5 21 8 15
P0908 PG 9 4-8 22 8 19
P0906 PG 9 2-6 22 8 19
P1110 PG 11 5-10 25 8 22
P1107 PG 11 3-7 25 8 22
P13512 PG 13,5 6-12 27 9 24
P13509 PG 13,5 5-9 27 9 24
P1614 PG 16 10-14 28 10 27
P1612 PG 16 7-12 28 10 27
P1915-DH PG 19 11-15 30 12 27
P2118 PG 21 13-18 31 11 33
P2116 PG 21 9-16 31 11 33
P2925 PG 29 18-25 37 11 42
P2920 PG 29 13-20 37 11 42
P3632 PG 36 22-32 48 13 53
P3626 PG 36 20-26 48 13 53
P4238 PG 42 32-38 49 13 60
P4231 PG 42 25-31 49 13 60
P4844 PG 48 37-44 49 14 65
P4835 PG 48 29-35 49 14 65
P4830 PG 48 25-30,5 49 14 65
P4840 PG 48 30,5-40 49 14 65
P4850 PG 48 40-50 52 14 72
7
HG
LD1
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
PG METAL CABLE GLAND
Material:Fixture pack:Hermetic seal:O-Ring:Protection degree:Working temperature:
Nickel-plated brassPA (NYLON), UL 94 V-2NBR, (EPDM Upon Request)EPDMIP68-40C° to 100C°, Instantaneous heat resistance up to 120C°
SPECIFICATIONS
TECHNICAL AND ORDERING DATAPart # Thread H GL
D1 mm mm mm mm
P0707BR PG 7 3-6,5 19 5 14
P0705BR PG 7 2-5 19 5 14
P0908BR PG 9 4-8 21 6 17
P0906BR PG 9 2-6 21 6 17
P1110BR PG 11 5-10 22 6 20
P1107BR PG 11 3-7 22 6 20
P13512BR PG 13,5 6-12 23 6,5 22
P13509BR PG 13,5 5-9 23 6,5 22
P1614BR PG 16 10-14 24 6,5 24
P1612BR PG 16 7-12 24 6,5 24
P2118BR PG 21 13-18 25 7 30
P2116BR PG 21 9-16 25 7 30
P2925BR PG 29 18-25 31 8 40
P2920BR PG 29 13-20 31 8 40
P3632BR PG 36 22-32 37 8 50
P3626BR PG 36 20-26 37 8 50
P4238BR PG 42 32-38 37 9 57
P4231BR PG 42 25-31 37 9 57
P4844BR PG 48 37-44 38 10 64
P4835BR PG 48 29-35 38 10 64
8
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
» Suitable for Indoor and Outdoor application. » Suitable for use with all Fire Alarm. » Compressible entry thread seals molded into Gland Body. » Available in two colors Red & White. » Supplied complete with Locknut.
» Material : Flame Retardant Nylon » Protection : IP-68 » Complies with BS EN-50262 » Supplied complete with Locknut.
SPECIFICATIONS
TECHNICAL AND ORDERING DATA
Gland Kit Reference Cable Dimension (mm) Cable Dimension (mm) Hexagon (mm)
Part # Size Qty Per Kit Diameter Entry
Thread (D)ThreadLth (E)
ProtrusionLth (F)
A/F(G)
A/C(H)
Min Max
BIFP20 20 100 6 12 M20X1.5 12 30 24 26.5
BIFP25 25 100 9 17 M25X2.5 10 32 30 32
Kit Comprises :
Nylon GlandNylon lock nut
FG
H
E
O
FIRE RATED CABLE GLAND
SMP20
SMP25
9
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
Wiping Gland
SPECIFICATIONS
Wiping Gland for indoor and outdoor use with all types of Steel Wire Armoured (SWA) cable and Aluminium Wire Armoured (AWA) cable providing mechanical cable retention & electrical continuity via armored wire termina-tion and Environmental seal on the cable outer sheath.
Type Wipiing GlandStandard BS 2874Material Brass Size X, Y and ZApplication SWA & AWA Armoured CableAccessories Hot Dip Galvanized Mild Steel Clamp, Neoprene Gasket.Packing As Per Standard Packing
Shrouds (PVC/LSHF)
SPECIFICATIONS
Shrouds adds extra protection to Cable Glands, made from high grade polyvi-nyl chloride. The shrouds are used to increase the protection against external chemical and environmental agents of cable glands, especially on cable entrance. The significative reduction of dirt or foreign substances on the cable gland will facilitate the future maintenance of cable glands. The arrow end of the sleeves is readily cut with a knife, enabling it to be slipped over a wide range of cable diameters and assists ease of installations. Standard Shrouds are produced from black PVC. LSHF shroud mostly used in Grey colour but we also supply in white, red, and blue colour.
Type PVC Shroud / LSHF ShroudStandard BS Material Black High-Grade Polyvinylchloride LSF and LSOH Shroud manufactured Low smoke and halogen free materialsProtection Class IP68Packing As Per Standard Packing Optional Available in Light Grey, Grey and Black for PVC CablesAvailable in Red Colour for LSHF Cables
10
INSULATED CABLE CONNECTORS
MALE PRE-INSULATION SPLICEMDD1.25-110
MDD1.25-187
MDD1.25-250
MDD 2-187
MDD 2-250
MDD 5.5-250
FEMALE PRE-INSULATION SPLICEFDD1.25-110
FDD1.25-187
FDD1.25-250
FDD2-187
FDD2-250
FDD5.5-250
FDD5.5-375
BULLET SHAPE MALE PRE-INSULATION TERMINALMPD 1.25-156
MPD 2-156
MPD 2-195
MPD 5.5-195
BULLET SHAPE FEMALE PRE-INSULATION TERMINALFRD 1.25-156
FRD 2-156
FRD 2-195
FRD 5.5-195
SMP-MDD:1.25-110
SMP-MPD:1.25-156
SMP-FDD:1.25-110
SMP-FRD:1.25-156
SMP-MDD:1.25-187
SMP-MPD:2-156
SMP-FDD:1.25-187
SMP-FRD:2-156
SMP-MDD:1.25-250
SMP-MPD:2-195
SMP-FDD:1.25-250
SMP-FRD:2-195
SMP-MDD:2-187
SMP-MPD:5.5-195
SMP-FDD:2-187
SMP-FRD:5.5-195
SMP-MDD:2-250
SMP-FDD:2-250
SMP-MDD:5.5-250
SMP-FDD:5.5-250
SMP-FDD:5.5-375
11
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
NEEDLE SHAPE PRE-INSULATION TERMINALPTV 1.25-9
PTV 1.25-10
PTV 1.25-12
PTV 1.25-13
PTV 2-10
PTV 2-12
PTV 2-13
PTV 5.5-13
PLATE SHAPE PRE-INSULATION TERMINALDBV 1.25-10
DBV 1.25-11
DBV 1.25-14
DBV 1.25-18
DBV 2-10
DBV 2-18
DBV 5.5-10
SMP-PTV:1.25-9
SMP-PTV:1.25-10
SMP-DBV:1.25-10
SMP-PTV:1.25-12
SMP-DBV:1.25-11
SMP-PTV:1.25-13
SMP-DBV:1.25-14
SMP-PTV:2-10
SMP-DBV:1.25-18
SMP-PTV:2-12
SMP-DBV:2-10
SMP-PTV:2-13
SMP-DBV:2-18
SMP-PTV:5.5-13
SMP-DBV:5.5-10
12
w
F EL
D
B A
T
Our cable lugs range allows cable insertion to be
Inspection Hole: The unique design of the inspection hole, helps the conductor to insert fully. The stopper at the end of the insertion allows the conductor to
place itself rightly inside the surface area of the crimp.
Application: Suitable for low & medium voltage switch gear & control panel.“
TECHNICAL AND ORDERING DATA
Part #
Cond. Size
“Barrel O.D. ‘A’
“Barrel I.D. ‘B’
“Stud Hole
Center ‘E’”
Stud Hole
Center To End of Palm ‘F’
Palm Width
‘W’
“Barrel Length
‘D’
“Total Length
‘L’
Thick-ness ‘T’
1.5-3:SCUL 1.5 3.8 1.9 4.5 4.5 7 7 18 1.9
1.5-4:SCUL 1.5 3.8 1.9 7.5 4.5 7 7 21 1.9
1.5-5:SCUL 1.5 3.8 1.9 7.5 4.5 8 7 21 1.9
1.5-6:SCUL 1.5 3.8 1.9 7.5 4.5 9 7 22 1.9
2.5-3:SCUL 2.5 3.9 2.4 4 4.5 7 8 18.5 1.5
2.5-4:SCUL 2.5 3.9 2.4 7.5 4.5 7 8 22 1.5
2.5-5:SCUL 2.5 3.9 2.4 7.5 4.5 9 8 22 1.5
2.5-6:SCUL 2.5 3.9 2.4 7.5 5.5 9.5 8 23 1.5
2.5-8:SCUL 2.5 3.9 2.4 7.5 7.5 12 8 25 1.5
4-3:SCUL 4 4.7 2.8 4.5 4.5 7 8 19 1.9
4-4:SCUL 4 4.7 2.8 7.5 4.5 7 8 22 1.9
4-5:SCUL 4 4.7 2.8 7.5 4.5 8.5 8 22 1.9
4-6:SCUL 4 4.7 2.8 7.5 5.5 10 8 23 1.9
4-8:SCUL 4 4.7 2.8 10.5 6.5 13 8 27 1.9
4-10:SCUL 4 4.7 2.8 11.5 7.5 14 11 32 1.9
6-4:SCUL 6 5.3 3.4 7.5 4.5 7.5 8.5 23.5 1.9
6-5:SCUL 6 5.3 3.4 7.5 4.5 8.5 8.5 23.5 1.9
StandardMaterial
Finish
IEC 61238-1Manufactured from seamless copper (99.5% min.) tube conforming to BS EN 12449:2012Electro tin-plated conforming to BS EN 1872:1984
SPECIFICATIONS
1.5-3:SMP
1.5-4:SMP
1.5-5:SMP
1.5-6:SMP
2.5-3:SMP
2.5-4:SMP
2.5-5:SMP
2.5-6:SMP
2.5-8:SMP
4-3:SMP
4-4:SMP
4-5:SMP
4-6:SMP
4-8:SMP
4-10:SMP
6-4:SMP
6-5:SMP
CABLE LUGS
13
6-6:SCUL 6 5.3 3.4 7.5 5.5 9.5 9 25 1.9
6-8:SCUL 6 5.3 3.4 10 7 12 9 29 1.9
6-10:SCUL 6 5.3 3.4 12 8 15 11 34 1.9
10-6:SCUL 10 6.6 4.7 6.4 6 10 8 24.5 1.7
10-8:SCUL 10 6.6 4.7 8 7 13 9.5 30.5 1.2
10-10:SCUL 10 7.1 4.4 12 10 16 12 39.5 1.4
10-12:SCUL 10 7.1 4.4 12 10 18 10 10.5 1.2
16-6:SCUL 16 7.5 5.5 8.8 6.2 10.8 9.5 30 2
16-8:SCUL 16 7.5 5.5 8.8 6.2 13.5 9.5 30 1.6
16-10:SCUL 16 7.5 5.5 10.9 9.6 15 9.5 36 1.5
16-12:SCUL 16 8 5.6 12 10 18 11.5 42 1.3
25-6:SCUL 25 9.4 7 8.8 6.5 13.8 12 32.5 2.4
25-8:SCUL 25 9.4 7 8 7 13.8 12 32.5 2.4
25-10:SCUL 25 9.4 7 10.9 9.6 16 13 39.5 2.1
25-12:SCUL 25 9.4 7 10.5 10 18 12.5 39 1.7
35-6:SCUL 35 10.6 8.2 8.7 6.3 15.3 15 36.5 2.4
35-8:SCUL 35 10.6 8.2 7.6 7.3 15.3 15 36.5 2.4
35-10:SCUL 35 10.6 8.2 10.9 9.6 15.3 15 41 2.4
35-12:SCUL 35 10.6 8.2 10 10.4 18 15 41 2.4
50-6:SCUL 50 11.9 9.5 8.8 6.2 17.4 14.9 37.5 2.5
50-8:SCUL 50 11.9 9.5 8 7 17.4 14.9 37.5 2.5
50-10:SCUL 50 11.9 9.5 10.9 9.6 17.4 15.5 42.5 2.5
50-12:SCUL 50 11.9 9.5 10.7 9.8 17.4 15.5 42.5 2.5
70-6:SCUL 70 14.5 11.5 9 6.4 20.9 17 41.5 3
70-8:SCUL 70 14.5 11.5 8.6 6.4 20.9 17 40.5 3
70-10:SCUL 70 14.5 11.5 10.9 9.6 20.9 17.5 47 3
70-12:SCUL 70 14.5 11.5 10.7 9.8 20.9 17.5 46.5 3
70-16:SCUL 70 14.5 11.5 13 13 20.9 17 51 3
95-6:SCUL 95 16.7 13.5 10 9.2 24.4 19 50 3.2
95-8:SCUL 95 16.7 13.5 10.1 9.9 24.4 19 50 3.2
95-10:SCUL 95 16.7 13.5 10.9 9.6 24.4 19 50 3.2
95-12:SCUL 95 16.7 13.5 10.5 10 24.4 19 50 3.2
95-14:SCUL 95 16.7 13.5 13 13 24.4 19 58 3.2
95-16:SCUL 95 16.7 13.5 13 13 24.4 19 59 3.2
120-8:SCUL 120 19 15 14.4 9.6 27.3 20 55.5 4
120-10:SCUL 120 19 15 14.4 9.6 27.3 20 55.5 4
120-12:SCUL 120 19 15 14 10 27.3 20 56.5 4
120-16:SCUL 120 19 15 14 14 27.3 20 64 4
150-10:SCUL 150 21 16.5 14 10 30.2 23 61 4.5
150-12:SCUL 150 21 16.5 13 13 30.2 23 61 4.5
6-6:SMP
35-10:SMP
6-8:SMP
35-12:SMP
6-10:SMP
50-6:SMP
10-6:SMP
50-8:SMP
10-8:SMP
50-10:SMP
10-10:SMP
50-12:SMP
10-12:SMP
70-6:SMP
16-6:SMP
70-8:SMP
16-8:SMP
70-10:SMP
16-10:SMP
70-12:SMP
120-8:SMP
16-12:SMP
70-16:SMP
120-10:SMP
25-6:SMP
95-6:SMP
120-12:SMP
25-8:SMP
95-8:SMP
120-16:SMP
25-10:SMP
95-10:SMP
150-10:SMP
25-12:SMP
95-12:SMP
150-12:SMP
35-6:SMP
95-14:SMP
35-8:SMP
95-16:SMP
14
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: egnahc ot thgir eht sevreser selbaC xelpmiS dna ylno ecnadiug rof era dedivorp snoisnemid ehT :remialcsiD
150-14:SCUL 150 21 16.5 13 13 30.2 23 61 4.5
150-16:SCUL 150 21 16.5 13 13 30.2 23 65 4.5
185-10:SCUL 185 23 18.5 14.8 9.2 33.3 29 66.5 4.36
185-12:SCUL 185 23 18.5 15.5 9.2 33.3 29 68 4.5
185-14:SCUL 185 23 18.5 15.5 9.2 33.3 29 67 4.5
185-16:SCUL 185 23 18.5 13 13 33.3 29 70 4.5
240-10:SCUL 240 26 21 18 17 37.7 39 88 5
240-12:SCUL 240 26 21 18 17 37.7 40 88.5 5
240-14:SCUL 240 26 21 18 17 37.7 40 88 5
240-16:SCUL 240 26 21 18 17 37.7 40 88 5
240-20:SCUL 240 26 21 18 17 37.7 40 88 5
300-10:SCUL 300 28 23 18 17 41 37 97 5
300-12:SCUL 300 28 23 18 17 41 37 97 5
300-14:SCUL 300 28 23 18 17 41 37 97 5
300-16:SCUL 300 28 23 18 17 41 37 97 5
300-20:SCUL 300 28 23 18 17 41 37 97 5
400-10:SCUL 400 32 27 22 22 47.3 38 108 5
400-12:SCUL 400 32 27 22 22 47.3 38 108 5
400-14:SCUL 400 32 27 22 22 47.3 38 108 5
400-16:SCUL 400 32 27 22 22 47.3 38 108.5 5
400-20:SCUL 400 32 27 22 22 47.3 38 108 5
500-10:SCUL 500 36 30 28 24 53 38 117 6.9
500-12:SCUL 500 36 30 28 24 53 38 117 6.9
500-14:SCUL 500 36 30 28 24 53 38 117 6.9
500-16:SCUL 500 36 30 28 24 53 38 117.5 6.9
500-20:SCUL 500 36 30 28 24 53 38 117 6.9
630-16:SCUL 630 45 34 23 25.1 63.3 48 130.5 10
630-20:SCUL 630 45 34 23 25.1 63.3 48 130.5 10
630-BL:SCUL 630 45 34 23 25.1 63.3 48 130.5 10
800-BL:SCUL 800 49 38 - - 70 65 172 11
HT/BM Cable Lugs Available based on request
150-14:SMP
400-12:SMP
150-16:SMP
400-14:SMP
185-10:SMP
400-16:SMP
185-12:SMP
400-20:SMP
185-14:SMP
500-10:SMP
185-16:SMP
500-12:SMP
240-10:SMP
500-14:SMP
240-12:SMP
500-16:SMP
240-14:SMP
500-20:SMP
240-16:SMP
630-16:SMP
240-20:SMP
630-20:SMP
300-10:SMP
630-BL:SMP
300-12:SMP
800-BL:SMP
300-14:SMP
300-16:SMP
300-20:SMP
400-10:SMP
15
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
CB
A
D
LSOH SINGLE BOLT CABLE CLEAT
TECHNICAL AND ORDERING DATA
Part #
Cleat DetailsCable Diameter ‘D’
BA C
Min Max Min Max
SB-01:SCUL 15 18 32 12 10.5 14.5
SB-02:SCUL 17 22 36 14 12.2 16.7
SB-03:SCUL 21 26 43 16 14.6 19.8
SB-04:SCUL 25 31 51 18 17.7 24
SB-05:SCUL 30 37 57 20 21.7 28.5
SB-06:SCUL 35 43 65 22 26.2 34.2
SB-07:SCUL 42 52 78 25 31.9 41.6
SB-08:SCUL 50 62 91 26 39.3 51.1
»indoor and outdoor applications.
» The curvature of the cleat mounting surface is appropriate for cable diameters 10mm to 51mm.
» Designed to assure cable retention and support, without causing damage or deformation to the cable.
» Excellent resistance to ultraviolet and weather.
StandardCable TypeMaterialContinuous Operating TemperatureCurrent Rating
BS EN 50368Designed for all types of cablesLow Smoke Zero Halogen Polymer -40°C to +60°CRecommended up to 1KVA
SPECIFICATIONS
SB-01:SMP
SB-02:SMP
SB-03:SMP
SB-04:SMP
SB-05:SMP
SB-06:SMP
SB-07:SMP
SB-08:SMP
16
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
DC
AE
B
TECHNICAL AND ORDERING DATA
PART #Cleat Details Cable Diameter ‘D’
C A B E Min Max
DB-01:SCUL 89 102 45 80 50 58
DB-02:SCUL 93 102 45 80 56 64
DB-03:SCUL 98 114 45 92 62 70
DB-04:SCUL 104 114 50 92 68 76
DB-05:SCUL 110 126 50 104 74 82
DB-06:SCUL 118 126 50 104 80 88
DB-07:SCUL 121 136 60 114 86 94
» Two bolt type design suitable for all types of LV cables.
» The curvature of the cleat mounting surface is appropriate for cable diameters ranging from 50mm to 94mm.
» Designed to assure cable retention and support, without causing damage or deformation to the cable.
» Excellent resistance to ultraviolet and weather.
StandardCable TypeMaterialContinuous Operating TemperatureCurrent Rating
BS EN 50368Designed for all types of cablesLow Smoke Zero Halogen Polymer-40°C to +60°CRecommended up to 1KVA
LSOH DOUBLE BOLT CABLE CLEAT
DB-01:SMP
DB-02:SMP
DB-03:SMP
DB-04:SMP
DB-05:SMP
DB-06:SMP
DB-07:SMP
SPECIFICATIONS
17
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
» » Suitable for use with cables from diameter 51mm to 114mm » » Epoxy coated for more hostile conditions.
Cable TypeMaterialContinuous Operating Temperature Current Rating
Designed for all types of cablesAluminium– 60° C to + 100° C Recommended above 1KVA
TECHNICAL AND ORDERING DATA
Part #Cable Diameter
RangeCleat Details
Fixing HoleW H D P
ATC:51-57 51-57 96 68 59 76 M10
ATC:57-64 57-64 6 75 49 76 M10
ATC:64-70 64-70 96 84 64 118 M10
ATC:70-76 70-76 134 90 64 114 M10
ATC:76-83 76-83 142 96 64 114 M12
ATC:83-89 83-89 142 102 64 114 M12
ATC:89-95 89-95 154 114 64 114 M12
ATC:95-101 95-101 154 120 76 126 M12
ATC:101-108 101-108 169 134 76 140 M12
ATC:108-114 108-114 169 140 76 149 M12
ALUMINIUM DOUBLE BOLT CABLE CLEAT
SPECIFICATIONS
18
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
C
D
B
A
» Suitable for use with LV, MV and HV cables. » Few range accommodates wide range of cable diameter. » » Epoxy coated for more hostile conditions.
Cable TypeMaterialContinuous Operating Temperature Current Rating
Designed for all types of cablesAluminium– 60° C to + 100° C Recommended above 1KVA
SPECIFICATIONS
TECHNICAL AND ORDERING DATA
Part # Cable DiameterCleat Details
A B C D
ATFCSP:15-30 15-30 30 45 108 80
ATFCSP:30-45 30-45 30 66 151 120
ATFCSP:45-60 45-60 40 85 184 151
ATFCSP:60-75 60-75 40 114 226 193
ATFCSP:75-90 75-90 40 142 267 235
ATFCSP:90-107 90-107 50 171 319 282
ATFCSP:107-129 107-129 57 203 390 352
ATFCSP:129-155 129-155 57 244 455 397
ALUMINIUM TREFOIL CABLE CLEAT
19
» Dimensions are displayed in millimeters unless otherwise stated. » Photographs are not a true representation of the product above.
Disclaimer: The dimensions provided are for guidance only and Simplex Cables reserves the right to change these
B
d
Cu
Ø
Al
StandardMaterialSurface Treatment
IEC 61238-1E-Cu; Al (99.6%)Bright
SPECIFICATIONS
TECHNICAL AND ORDERING DATA
Part #DIMENSIONS (mm)
D B Ø
16BS-10:SCUL 5.60 20.00 10.50
25BS-10:SCUL 6.50 20.00 10.50
35BS-10:SCUL 8.50 20.00 10.50
50BS-12:SCUL 9.50 24.00 12.80
70BS-12:SCUL 11.00 24.00 12.80
95BS-12:SCUL 12.50 24.00 12.80
120BS-12:SCUL 13.70 30.00 12.80
150BS-12:SCUL 15.50 30.00 12.80
185BS-12:SCUL 17.00 35.00 12.80
240BS-12:SCUL 19.50 35.00 12.80
300BS-16:SCUL 23.30 36.00 16.50
400BS-16:SCUL 26.00 36.00 16.50
500BS-16:SCUL 29.00 60.00 17.00
630BS-16:SCUL 32.50 60.00 17.00
BI-METALLIC LUGS
16BS-10:SMP
185BS-12:SMP
25BS-10:SMP
240BS-12:SMP
35BS-10:SMP
300BS-16:SMP
50BS-12:SMP
400BS-16:SMP
70BS-12:SMP
500BS-16:SMP
95BS-12:SMP
630BS-16:SMP
120BS-12:SMP
150BS-12:SMP
20
OUR GLOBAL PRESENCE
www.caparomiddleeast.com
Rigid conduit tube, HDG Malleable fittings Steel fittings Brass fittings Switch and socket boxes Conduit bending machines Flexible Tube and fittings
www.walsallconduits.co.uk
Rigid conduit tube, HDG Malleable fittings Steel fittings Brass fittings Switch and socket boxes Conduit bending machines Flexible Tube and fittings
www.bullmooseindustries.com
Bull Moose Industries: products and services of exceptional strength
Bull Moose Tube Bull Moose Mobility
www.caparo.co.in
High Tensile Fasteners Automotive, Aerospace and General
Engineering Applications
Carbon Steel, Alloyed Steel and Stainless
Steel
www.caparo.co.in Forging and machined components parts
for automotive and non - automotive application. Crank shafts Connecting rods Transmission parts Full range of forging capabilities
www.caparo.co.in Precision, high pressure and gravity die casting
Pressure tight cast parts Safety critical parts
Automotive and non -automotive sectors