SCIENTIFIC CURRICULUM VITAE · 1. Full name: NGUYEN THOI TRUNG 2. Birthday: 06/12/1976 3. Sex: Male 4. Profession: Researcher, Lecturer 5. Academic degree: PhD Year of issue: 2010

1

SCIENTIFIC CURRICULUM VITAE

I. Personal information

1. Full name: NGUYEN THOI TRUNG

2. Birthday: 06/12/1976 3. Sex: Male

4. Profession: Researcher, Lecturer

5. Academic degree: PhD Year of issue: 2010

6. Position/title: Director of Institute for Computational Science, Ton Duc Thang University

7. Contact:

TT Office Home

1 Home

adress

Institute for Computational Science,

Ton Duc Thang University, 19 Nguyen

Huu Tho, Tan Phong ward, District 7,

HCMC

2 Phone/ fax (084) 028 377 55024 0933 666 226

3 Email [email protected] [email protected]

8. Period of research:

Time Institution Position

03/2010 -

11/2013

Division of Computational Mechanics, Ton Duc

Thang University

Deputy head

Part-time researcher

11/2013 -

02/2014

Department for Management of Science and

Technology Development, Ton Duc Thang

University

Director assistant

(part-time)

11/2013 -

now

Division of Computational Mathematics and

Engineering, Ton Duc Thang University

Head

(part-time)

Since

02/2014 -

now

Institute for Computational Science, Ton Duc Thang

University

Director

(full-time)

9. Education background (latest):

Level Time Institution Major/Specialty

Bachelor 1994-1999

Ho Chi Minh City University of

Technology (HCMUT) – Vietnam

National University–HCMC

Civil Engineer

Bachelor 1994-2001 University of Science – Vietnam Mathematics and Computer

Picture

2

Level Time Institution Major/Specialty

National University–HCMC Science

Master 2000-2003 University of Science –Vietnam

National University–HCMC Applied Mechanics

Master 2001-2003 University of Liege (Belgium) Modelisation of Continuum

PhD 2005-2010 National University of Singapore

(NUS). Mechanical Engineering

Bachelor 2012-2015

Ho Chi Minh City University of

Social Sciences and Humanities –

Vietnam National University –

HCMC

Philosophy (Political

Science)

II. Research and supervision

1. Main research directions

- Numerical methods in computational solids mechanics (Smoothed Finite Element

Methods, Moving elements, Isogeometric elements (IGA)…)

- Computational nonlinear solid mechanics (material nonlinear (visco-elastoplasticity),

geometric nonlinear (plates, shells))

- Computational fracture solid mechanics (eXtended S-FEM, Enriched S-FEM,

Wavelet analysis…)

- Computational optimization in mechanics (topology optimization, structural

optimization, dynamic optimization, intelligent optimization, multi-objective

optimization, reliability-based optimization, limit analysis)

- Reliability analysis in solid mechanics (FORM, SORM, Monte Carlo, Surface

Responsse, intelligent reliability analysis (Neural-Network)…)

- Computational solid mechanics in multiphysics environment (fluid (acoustic) - solid

interaction, dynamics response of plates on foundations, analysis of structures (2D,

plates, shells) using intelligent materials (FGM, Composite, Piezo-electricity) …)

- Intelligent computation in solid mechanics (Neural Network, Fuzzy, Artificial

intelligence, Code parallelization …)

- Numerical methods for Structural Health Monitoring (SHM)

- Parallel Computing

- Inverse Problems

2. Research projects

No

Project

Code &

Levels of

Orgnization

Time

Role (Pricinpal

investigator or

members)

Period of

time Results

1.

Application of optimization

methods for composite

material

T2003-06

University of

Science – VNU-

HCMC

1 year Principal

Investigator

2003 to

2004 Completed

3

No

Project

Code &

Levels of

Orgnization

Time

Role (Pricinpal

investigator or

members)

Period of

time Results

2.

Research and development

of the smoothed finite

element methods for

modeling and simulating the

interaction problems in the

multiphysics environments

107.02-2010.01

National

Foundation for

Science and

Technology

Development

(NAFOSTED)

2 years

Principal

Investigator

11/2010

to

11/2012

Completed

3.

Development of smoothed

finite element methods for

computation and

optimization of some

problems in the multiphysics

environments

107.02-2012.05

National

Foundation for

Science and

Technology

Development

(NAFOSTED)

2 years

Principal

Investigator

03/2013

to

01/2015

Completed

4.



computation, optimization

and reliability analysis of

stiffened plate and shell

structures

B2013-18-03

Princial Project –

Rank B (VNU-

HCM)

2 years Principal

Investigator

03/2013

to

03/2015

Completed

5.



free vibration analysis of

cracked Mindlin plate/shell

structures

FOSTECT.2014.

BR.01, Ton Duc

Thang

University

(FOSTECT)

1 year

Principal

Investigator

02/2015

to

02/2016

Completed

6.

Development of numerical

methods for computation,

optimization and reliability

analysis of some problems in

the multiple physical

environments

107.99-2014.11

National

Foundation for

Science and

Technology

Development

(NAFOSTED)

2 years Principal

Investigator

06/2015

to

06/2017

Completed

7.

Development of numerical

methods for computation,

optimization and health

monitoring of the structures

in the multiple physical

environments

107.02-2017.08

National

Foundation for

Science and

Technology

Development

(NAFOSTED)

2 years Principal

Investigator

11/2017

to

11/2019

On going

3. Supervision (Master, PhD)

No Name of students Name of thesis / University Years Level Results

PhD-01

Bui Xuan Thang

(University of

Science –VNU-

HCM)

Development of finite element

methods for analysis and

optimization of stiffened plate

structures

(2012 - ) PhD

4


PhD-02

Le Hung Tien (Ton

Duc Thang

University)

Development of effective

optimization approaches for BIM

application in AEC industry in

Vietnam

(2018 -

2021) PhD

PhD-03

Dinh Cong Du

(Ton Duc Thang

University)

Development of efficient numerical

approaches for optimal sensor

placement and damage detection for

civil engineering structures

(2018 -

2021) PhD

PhD-04

Truong Thi Tam

(Ton Duc Thang

University)

Development of high performance

smart numerical approaches for

optimization and damage diagnose of

structures

(2019 -

2022) PhD

PhD-05

Nguyen Trang Thao

(Ton Duc Thang

University)

Cluster analysis of probability

density functions using evolutionary

optimization algorithms and

application

(2019 -

2022) PhD

MSc-01

Phung Van Phuc

(University of

Technical

Education HCM)

Development of the edge-based

smoothed finite element method for

simulating the fluid-solid interaction

problems

11/2011 MSc 9.5/10

MSc-02

Nguyen Ngoc Nhan

(University of

Science –VNU-

HCM)

Development of the node-based

smoothed finite element method for

simulating the fluid-solid interaction

problems

1/2012 MSc 9.3/10

MSc-03

Tran Van Phat

(HCMC University

of Technology)

Reliability analysis of piezoelectric

composite laminate plates by the

edge-based smoothed finite element

method

2/2012 MSc 7.0/10

MSc-04

Ong Kim Sang

(HCMC University

of Technology)

Reliability analysis of FGM plates by

the edge-based smoothed finite

element method (ES-FEM)

2/2012 MSc 8.7/10

MSc-05

Pham Van Truc

(HCMC University

of Technology)

Reliability analysis of composite

laminate plates by the edge-based

smoothed finite element method

2/2012 MSc 8.0/10

MSc-06

Nguyen Quoc Huy

(HCMC University

of Technology)

Reliability analysis of free vibration

frequencies of Mindlin plates/shells

by CS-DSG3

9/2012 MSc 7.6/10

MSc-07

Thai Hong Son

(HCMC University

of Technology)

Free vibration of Mindlin shells in

coupling with the fluid by the

coupling method CS-DSG3/FS-FEM

9/2012 MSc 7.9/10

MSc-08

Lieu Xuan Qui

(HCMC University

of Technology)

Analysis of solids subjected to the

effect of fluid flow by the edge-

based smoothed finite element

method (ES-FEM)

9/2012 MSc 8.8/10

5


MSc-09

Nguyen Quoc Toan

(HCMC University

of Technology)

A coupling CS-MIN3/FS-FEM for

free vibration of Mindlin plates in

coupling with the fluid

9/2012 MSc 7.6/10

MSc-10

Pham Đuc Tuan

(HCMC University

of Technology)

Analysis of Reissner-Mindlin plate

stiffend by Timoshenko beam by the

CS-DSG3

9/2012 MSc 8.2/10

MSc-11

Pham Ngoc Tan

(HCMC University

of Technology)

Dynamics analysis of structures

subjected to dynamics loads on the

topbase foundation

9/2012 MSc 8.1/10

MSc-12

Van Đinh Hung

(HCMC University

of Technology)

Analysis of bubble deck plates using

circle and improved elliptic balls 9/2012 MSc 9.0/10

MSc-13

Truong Anh Tuan

(HCMC University

of Technology)

Limit analysis of Mindlin plates by

the CS-DSG3 and second-order cone

programming (SOCP)

2/2013 MSc 6.7/10

MSc-14

Vo Thi Mong

Tuyen

(HCMC University

of Technology)

Optimization of Mindlin plate

stiffened by Timoshenko beam by

the Genetic Algorithm (GA) and the

CS-DSG3

2/2013 MSc 7.0/10

MSc-15

Tran Van Dan

(HCMC University

of Technology)

Optimization of composite laminate

plates by the Genetic Algorithm

(GA) and the CS-DSG3

2/2013 MSc 8.0/10

MSc-16

Đo Chi Thanh

(HCMC University

of Technology)

Geometrical nonlinear analysis of

composite laminate plates by the CS-

MIN3

2/2013 MSc 7.8/10

MSc-17

Nguyen Anh Tuan

(HCMC University

of Technology)

Free vibration analyis of cracked

Mindlin plate by the XCS-DSG3,

and crack identification of the

cracked plates by wavelet analysis

2/2013 MSc 7.8/10

MSc-18

Chuong Tuong Anh

(HCMC University

of Technology)

Analyze of stiffened Mindlin shells

by the CS-DSG3 9/2013 MSc 7.0/10

MSc-19

Tran Phuong Bao

(HCMC University

of Technology)

Analyze of cracked Mindlin shells by

the XCS-DSG3 9/2013 MSc 8.0/10

MSc-20

Tran Nhu Diem

(Military

technology

Institute)

Analyze of composite laminate plate

on Pasternak elastic foundation by

the CS-DSG3

9/2013 MSc 8.8/10

MSc-21

Tran Đac Quan

(Open University -

HCMC)

Reliability-based topology

optimization of shell structures 9/2013 MSc 7.5/10

MSc-22 Huynh Thanh

Phuong

Reliability-based design optimization

of structural truss 9/2013 MSc 8.0/10

6


(Open University -

HCMC)

MSc-23

Đinh Ha Duy

(HCMC University

of Technology)

Dynamics analysis of highway train

considering the curve of rails and

interaction of foundation

9/2013 MSc 8.5/10

MSc-24

Le Do Phuong An

(HCMC University

of Technology)

Reliability analysis of Mindlin plate

on the Topbase reinforced

foundation

2/2014 MSc 7.4/10

MSc-25

Nguyen Duy Phu

(HCMC University

of Technology)

Dynamics analysis of moving mass

on the three-layer foundation using

the moving element MFM

8/2014 MSc 7.6/10

MSc-26

Bui Nguyen Trong

Toan

(HCMC University

of Technology)

Dynamics analysis of structures

subjected to earthquake loads and

material nonlinear using the roof

floor as mass damping system TMD

8/2014 MSc 8.1/10

MSc-27

Ngo Thi Hong

Quyen

(Open University -

HCMC)


of predefined steel frame 2/2014 MSc 7.6/10

MSc-28

Dinh Cong Du

(Open University -

HCMC)

Static and free vibration analysis of

sandwich composite shells using

layerwise theory and smoothed finite

element CS-MIN3

11/2014 MSc 7.9/10

MSc-29

Le Quang Vinh

(Open University -

HCMC)

Geometrical and dimensional

optimization of truss structures using

Improved Differential Evolution

(DE)

11/2014 MSc 7.6/10

MSc-30

Le Thai Binh

(Ton Duc Thang

University)

Mass optimization of I-figure steel

beam structures using HMPSO

method

12/2014 MSc 7.0/10

MSc-31

Nguyen Thuy Đoan

Nhi (Ton Duc

Thang University)

Multiobjective optimization of

folded composite plates using

NSGA - II method

12/2014 MSc 8.0/10

MSc-32

Dong Vu Nguyen

Bach (Ton Duc

Thang University)

Free vibration analysis of cracked

FGM plates using extended

smoothed finite element XCS-MIN3

12/2014 MSc 7.4/10

MSc-33

Tran Quang Minh

(HCMC University

of Technology)

Static, free vibration and buckling

analysis of stiffened folded plates

using smoothed finite element CS-

FEM-MIN3

12/2014 MSc 7.5/10

MSc-34

Hoang The Manh

(HCMC University

of Technology)

Position optimization of stiff floors

using combined method between

multiobjective and Differential

Evolution methods

12/2014 MSc 5.7/10

MSc-35 Nguyen Viet Cuong Reliability-based optimization of 01/2015 MSc 8.5/10

7


(HUTECH) composite plates using Differential

Evolution method and SORA

MSc-36

Nguyen Thi Thanh

Truc

(HUTECH)

Truss optimization subjected to

frequency constraints using

Differential Evolution algorithm

01/2015 MSc 7.5/10

MSc-37 Huynh Trong Nghia

(HUTECH)

Analysis of truss structures subjected

to effects of fuzzy parameters using

Differential Evolution algorithm

04/2015 MSc 7.1/10

MSc-38 Nguyen Minh Tho

(HUTECH)


of pile foundations using double loop

method

04/2015 MSc 7.8/10

MSc-39 Le Van Dung

(HUTECH)

Reliability analysis of glass-cab

structures using Artificial Neural

Network and First order Reliability

Method

04/2015 MSc 7.5/10

MSc-40

Nguyen Đang

Thach (HCMC

Architect

University)

Geometrical nonlinear analysis of

plates, shells using CS-DSG3 8/2015 MSc 8.4/10

MSc-41

Pham Ba Nha

(HCMC University

of Technology)

Dynamics analysis of Kirchhoff

plates on visco-elastic foundation

subjected to moving loads using

moving triangular elements

8/2015 MSc 8.0/10

MSc-42

Le Dinh Van

(Open University-

HCMC)

Reliability-based optimization of

stiffened oil shells using coupled

method PSO-SQP

10/2015 MSc 8.5/10

MSc-43

Truong Hue An

(HCMC University

of Technology)

Time-based reliability analysis of

steel concrete structures along the

coast

02/2016 MSc 7.4/10

MSc-44

Tran Minh Lam

(HCMC University

of Technology)


stiffened shells using single-loop

algorithm

02/2016 MSc 7.1/10

MSc-45

Ho Huu Vinh

(HCMC University

of Technology)

Development of differential

evolution algorithm for reliability-

based optimization using discrete

design variables

06/2016 MSc 10/10

MSc-46

Bui Vinh Thai

(Open University-

HCMC)

Reliability-based multi-objective

optimization for steel frames using

single-loop algorithm

06/2016 MSc 7.3/10

MSc-47

Le Trung Thinh

(HCMC University

of Technology)

Reliability analysis of steel frame

structures subjected to corrosion over

time

07/2016 MSc 6.5/10

MSc-48

Le Duc Thang

(HCMC University

of Technology)

Optimization design of

magnetorheological brake (MRB)

using improved DE algorithm

09/2016 MSc 10/10

8


MSc-49

Vu Đinh Thach

(HUTECH

University)

Reliability analysis of 3D steel frame

using ANFIS and MONTE-CARLO 12/2016 MSc 7.4/10

MSc-50

Lam Thi Phuc

Hanh (HUTECH

University)


steel structures using definite single-

loop algorithm

12/2016 MSc 7.3/10

MSc-51

Nguyen Quang Kha

(Bach Khoa

University)

Analysis and vibration control of

piezo FGM plate structures using

CS-DSG3

01/2017 MSc 8.85/10

MSc-52

Đo Qui Toan

(Open University-

HCMC)

Damage diagnose of frame structures

using discrete located vector (DLV)

method and DE algorithm

03/2017 MSc 7.7/10

MSc-53

Nguyen Thanh Tien

(Open University-

HCMC)

Damage diagnose of multi-layer

composite beams using discrete

located vector (DLV) method and

DE algorithm

03/2017 MSc 8.5/10

MSc-54

Nguyen Minh Nhan

(Bach Khoa

University)

Analysis of corrugated panels using

smoothed finite element methods 07/2017 MSc 9.0/10

MSc-55

Pham Duy Sang

(Bach Khoa

University)

Damage diagnose of FGM plate

using strain energy method and DE

evolution algorithm

08/2017 MSc 8.8/10

MSc-56

Le Quang Hoa

(Open University-

HCMC)


optimization design for pile

foundation

08/2017 MSc 7.5/10

MSc-57

Tran Quoc Tuan

(HUTECH

University)

Damage diagnose of truss structures

using Cuckoo Search (CS) algorithm

and vibration information of

structures

10/2017 MSc 7.5/10

MSc-58

Nguyen Thanh

Liem (HUTECH

University)

Multi-objective optimization of

laminated composite beam structures

subjected to frequency constraint

using NSGA-II method

10/2017 MSc 7.4/10

MSc-59

Duong Gia Dung

(HUTECH

University)


optimization of truss structures using

NSGA-II method

10/2017 MSc 8.0/10

MSc-60

Nguyen Ngoc Linh

(HUTECH

University)

Damage diagnose of 2D beam

structures based on dynamics

parameters of structures using strain

energy method & ABC algorithm

10/2017 MSc 6.5/10

MSc-61

Pham Khanh Thai

Duy (Open

University -

HCMC)

Chẩn đoán hư hại cho tấm composite

nhiều lớp sử dụng phương pháp năng

lượng biến dạng và giải thuật tìm

kiếm phân nhánh ngẫu nhiên

08/2018 MSc 8.8/10

9

III. International publications (120 ISI papers)

1. Scientific papers

No Authors Title Journal Vol/pages Year Rank

1. Liu GR, Dai

KY, Nguyen-Thoi T

A smoothed finite element

method for mechanics

problems

Computational

Mechanics 39: 859-877 2007 SCI

2.

Liu GR, Nguyen-

Thoi T, Dai KY,

Lam KY

Theoretical aspects of the

smoothed finite element

method (SFEM)

International

journal for

numerical methods

in Engineering

71: 902-930 2007 SCI

3. Dai KY, Liu

GR, Nguyen-Thoi T

An n-sided polygonal


method (nSFEM) for solid

mechanics

Finite elements in

analysis and design 43: 847-860 2007 SCI

4.

Zhang GY, Liu

GR, Nguyen-Thoi

T, Song CX, Han X,

Zhong ZH, Li GY

The upper bound property

for solid mechanics of the

linearly conforming radial

point interpolation method

(LC-RPIM)

International

Journal of

Computational

Methods

4(3): 521-

541 2007 SCIE

5.

Nguyen-Thoi T, Liu

GR, Dai KY, Lam

KY

Selective Smoothed Finite

Element Method

Tsinghua Science

and Technology

12(5): 497-

508 2007 SCIE

6. Liu GR, Nguyen-

Thoi T, Lam KY

A novel Alpha Finite

Element Method (aFEM)

for exact solution to

mechanics problems using

triangular and tetrahedral

elements

Computer Methods

in Applied

Mechanics and

Engineering

197: 3883-

3897 2008 SCI

7.

Cui XY, Liu GR, Li

GY, Zhao

X, Nguyen-Thoi T,

Sun GY

A smoothed finite element

method (SFEM) for linear

and geometrically

nonlinear analysis of

plates and shells

CMES-Computer

Modeling in

Engineering and

Sciences

28(2): 109-

125 2008 SCIE

8. Liu GR, Nguyen-

Thoi T, Lam KY

A novel FEM by scaling

the gradient of strains with

factor a (aFEM)

Computational


9.

Liu GR, Xu X,

Zhang GY, Nguyen-

Thoi T

A superconvergent point

interpolation method (SC-

PIM) with piecewise

linear strain field using

triangular mesh

International

Journal for

numerical methods

in Engineering

77: 1439-

1467 2009 SCI

10.

Liu GR, Nguyen-

Thoi T, Nguyen-

Xuan H, Lam KY

A node-based smoothed

finite element method

(NS-FEM) for upper

bound solution to solid

mechanics problems

Computers and

Structures 87: 14-26 2009 SCI

10


11. Liu GR, Nguyen-

Thoi T, Lam KY

An edge-based smoothed


(ES-FEM) for static, free

and forced vibration

analyses in solids

Journal of Sound

and Vibration

320: 1100-

1130 2009 SCI

12.

Nguyen-Thoi T, Liu

GR, Lam KY, Zhang

GY

A Face-based Smoothed

Finite Element Method

(FS-FEM) for 3D linear

and nonlinear solid

mechanics problems using

4-node tetrahedral elements

International

Journal for

Numerical Methods

in Engineering

78: 324-353 2009 SCI

13.

Liu GR, Nguyen-

Thoi T, Nguyen-

Xuan H, Dai KY,

Lam KY

On the essence and the

evaluation of the shape

functions for the smoothed


(SFEM) (Letter to Editor)

International

Journal for

Numerical Methods

in Engineering

77: 1863-

1869 2009 SCI

14.

Liu GR, Nguyen-

Xuan H, Nguyen-

Thoi T, Xu X

A novel Galerkin-like

weakform and a

superconvergent alpha


(SaFEM) for mechanics

problems using triangular

meshes

Journal of

Computational

Physics

228: 4055-

4087 2009 SCI

15.

Nguyen-Xuan H, Liu

GR, Nguyen-Thoi

T, Nguyen-Tran C

An edge–based smoothed


(ES-FEM) for analysis of

two–dimensional

piezoelectric structures

Smart Materials

and Structures

18: 065015,

12pp 2009 SCI

16. Nguyen-Xuan

H, Nguyen-Thoi T

A stabilized smoothed

finite element method for

free vibration analysis of

Mindlin-Reissner plates

International

Journal for

Numerical Methods

in Biomedical

Engineering

25: 882-906 2009 SCI

17.

Nguyen-Thoi T, Liu

GR, Vu-Do HC,

Nguyen-Xuan H

A face-based smoothed

finite element method (FS-

FEM) for visco-

elastoplastic analyses of 3D

solids using tetrahedral

mesh

Computer Methods

in Applied

Mechanics and

Engineering

198: 3479-

3498 2009 SCI

18.

Nguyen-Thoi T, Liu

GR, Vu-Do HC,

Nguyen-Xuan H


finite element method (ES-

FEM) for visco-

elastoplastic analyses of 2D

solids using triangular mesh

Computational


19. Nguyen-Xuan H, Liu

GR, Thai-Hoang



with stabilized discrete

Computer Methods

in Applied

Mechanics and

199: 471-

489 2009 SCI

http://dx.doi.org.libproxy1.nus.edu.sg/10.1016/j.cma.2009.09.001

11


C, Nguyen-Thoi T shear gap technique for

analysis of Reissner-

Mindlin plates

Engineering

20. Nguyen-Thoi T, Liu

GR,Nguyen-Xuan H

Additional properties of

the node-based smoothed


(NS-FEM) for solid

mechanics problems

International

Journal of

Computational

Methods

6(4): 633-

666 2009 SCIE

21.

Chen L, Nguyen-

Xuan H, Nguyen-

Thoi T, Zeng KY,

Wu SC

Assessment of smoothed

point interpolation

methods (PIMs) for elastic

mechanics

International

Journal for

Numerical Methods

in Biomedical

Engineering

26(12):

1635-1655 2010 SCI

22.

Wu SC, Liu GR, Cui

XY, Nguyen TT,

Zhang GY


point interpolation method

(ES-PIM) for heat transfer

analysis of rapid

manufacturing system

International

Journal of Heat and

Mass Transfer

53(9-10):

1938 –

1950

2010 SCI

23.

Tran Ngoc Thanh,

GR Liu, Nguyen-

Xuan H, Nguyen-

Thoi T



primal-dual shakedown

analysis of structures

International

Journal for

Numerical Methods

in Engineering

82(7): 917-

938 2010 SCI

24.

Liu GR, Chen

L, Nguyen-Thoi T,

Zeng K, G. Y. Zhang

A novel singular node-

based smoothed finite

element method (NS-

FEM) for upper bound

solutions of cracks

International

Journal for

Numerical Methods

in Engineering

83(11):

1466-1497 2010 SCI

25.

Liu GR, Nguyen-

Xuan H, Nguyen-

Thoi T

A theoretical study on the

smoothed FEM (S-FEM)

models: properties,

accuracy and convergence

rates

International

Journal for

Numerical Methods

in Engineering

84(10):

1222-1256 2010 SCI

26.

H. Nguyen-Xuan,

T. Rabczuk,

N. Nguyen-

Thanh, T. Nguyen-

Thoi, S. Bordas



with stabilized discrete

shear gap technique for

analysis of Reissner–

Mindlin plates

Computational

Mechanics

46(5): 679-

701 2010 SCI

27.

T. Nguyen-Thoi,

H.C. Vu-Do, T.

Rabczuk, H.

Nguyen-Xuan



(NS-FEM) for upper

bound solution to visco-

elastoplastic analyses of

solids using triangular and

tetrahedral meshes

Computer Methods

in Applied

Mechanics and

Engineering

199(45-48):

3005-3027 2010 SCI

12


28.

Nguyen-Thoi T, Liu

GR, Nguyen-Xuan

H, Nguyen-Tran C

Adaptive analysis using

the node-based smoothed


(NS-FEM)

International

Journal for

Numerical Methods

in Biomedical

Engineering

27(2): 198-

218 2011 SCI

29. Nguyen-Thoi T, Liu

GR, Nguyen-Xuan H

An n-sided polygonal

edge-based smoothed


(nES-FEM) for solid

mechanics

International

Journal for

Numerical Methods

in Biomedical

Engineering

27(9):

1446-1472 2011 SCI

30.

Liu GR, Nguyen-

Xuan H, Nguyen-

Thoi T

A variationally consistent

aFEM (VCaFEM) for

solid mechanics problems

International

Journal for

Numerical Methods

in Engineering

85(4): 461-

497 2011 SCI

31.

L. Chen, GY. Zhang,

J. Zhang, T.

Nguyen-Thoi, Q.

Tang

An adaptive edge-based

smoothed point

interpolation method for

mechanics problems

International

Journal of

Computer

Mathematics

88(11):

2379-2402 2011 SCIE

32.

H. Nguyen-Xuan,

Loc V. Tran, T.

Nguyen-Thoi, H.C

Vu Do

Analysis of functionally

graded plates using an

edge-based smoothed


Composite

Structures

93(11):

3019-3039 2011 SCIE

33.

H. Nguyen-Xuan, T.

Rabczuk, T.

Nguyen-Thoi, T. N.

Tran. N. Nguyen-

Thanh

Computation of limit and

shakedown loads using a

node-based smoothed


International

Journal for

Numerical Methods

in Engineering

90(3): 287-

310 2012 SCI

34.

T. Nguyen-Thoi, P.

Phung-Van, H.

Nguyen-Xuan, Chien

H. Thai

A cell-based smoothed

discrete shear gap method

(CS-DSG3) using

triangular elements for

static and free vibration

analyses of Reissner-

Mindlin plates

International

Journal for

Numerical Methods

in Engineering

91(7): 705-

741 2012 SCI

35.

C. Thai-Hoang, H.

Nguyen-Xuan, N.

Nguyen-Thanh, T.

Nguyen-Thoi, T.

Rabczuk

Static, free vibration, and

buckling analysis of

laminated composite

Reissner–Mindlin plates

using NURBS-based

isogeometric approach

International

Journal for

Numerical Methods

in Engineering

91(6): 571-

603 2012 SCI

36.

Chien H. Thai, Loc

V. Tran, Dung T.

Tran, T. Nguyen-

Thoi, H. Nguyen-

Xuan

Analysis of laminated

composite plates using

higher-order shear

deformation plate theory

and node-based smoothed


Applied

Mathematical

Modelling

36(11):

5657-5677 2012 SCIE

13


37.

H. Nguyen-Xuan,

Loc V. Tran, Chien

H. Thai, T. Nguyen-

Thoi

Analysis of functionally

graded plates by an

efficient finite element

method with node-based

strain smoothing

Thin-Walled

Structures 54: 1-18 2012 SCIE

38.

T. Nguyen-Thoi, P.

Phung-Van, H.

Luong-Van, H.

Nguyen-Van, H.

Nguyen-Xuan


three-node Mindlin plate

element (CS-MIN3) for


analyses of plates

Computational

Mechanics

51(1): 65-

81 2013 SCI

39.

T. Nguyen-Thoi, T.

Bui-Xuan, P. Phung-

Van, H. Nguyen-

Xuan, P. Ngo-Thanh

Static, free vibration and

buckling analyses of

stiffened plates by CS-

FEM-DSG3 using

triangular elements

Computers and

Structures

125: 100-

113 2013 SCI

40.

T. Nguyen-Thoi, P.

Phung-Van, Chien

H. Thai, H. Nguyen-

Xuan



(CS-DSG3) using

triangular elements for


analyses of shell structures

International

Journal of

Mechanical

Sciences

74: 32-45 2013 SCI

41.

H. Nguyen-Xuan,

Chien H. Thai, T.

Nguyen-Thoi

Isogeometric finite

element analysis of

composite sandwich plates

using a new higher order

shear deformation theory

Composite Part B:

Engineering 55: 558-574 2013 SCI

42.

P. Phung-Van, T.

Nguyen-Thoi, T. Le-

Dinh, H. Nguyen-

Xuan

Static, free vibration

analyses and dynamic

control of composite plates

integrated with

piezoelectric sensors and

actuators by the cell-based

smoothed discrete shear

gap method (CS-FEM-

DSG3)

Smart Materials

and Structures

22(9):

095026 2013 SCI

43.

P. Phung-Van, T.

Nguyen-Thoi, L.

Tran-Vinh, H.

Nguyen-Xuan



(CS-DSG3) based on the

C0-type higher-order

shear deformation theory

for static and free

vibration analyses of

functionally graded plates

Computational

Materials Science 79: 857-872 2013 SCI

44.

H.H. Phan Dao, H.

Nguyen-Xuan,

Chien. H.

Thai, T.Nguyen-

Thoi, T. Rabczuk



analysis of laminated

composite plates

International

Journal of

Computational

Methods

10(1):

1340005 2013 SCIE

14


45.

T. Nguyen-Thoi, P.

Phung-Van, T.

Rabczuk, H.

Nguyen-Xuan, C.

Le-Van

An application of the ES-

FEM in solid domain for

dynamic analysis of 2D

fluid-solid interaction

problems

International

Journal of

Computational

Methods

10(1):

1340003 2013 SCIE

46.

Canh.V. Le, H.

Nguyen-Xuan, H.

Askes, T.

Rabczuk, T.

Nguyen-Thoi

Computation of limit load

using edge-based


method and second-order

cone programming

International

Journal of

Computational

Methods

10(1):

1340004 2013 SCIE

47.

T. Nguyen-Thoi, P.

Phung-Van, T.

Rabczuk, H.

Nguyen-Xuan, C.

Le-Van

Free and forced vibration

analysis using the n-sided

polygonal cell-based


method (nCS-FEM)

International

Journal of

Computational

Methods

10(1):

1340008 2013 SCIE

48.

H. Luong-Van, T.

Nguyen-Thoi, GR.

Liu, P. Phung-Van



using three-node shear-

locking free Mindlin plate

element (CS-FEM-MIN3)

for dynamic response of

laminated composite

plates on viscoelastic

foundation

Engineering

Analysis with

Boundary Elements

42: 8-19 2014 SCI

49.

P. Phung-Van, T.

Nguyen-Thoi, H.

Luong-Van, Q. Lieu-

Xuan

Geometrically nonlinear

analysis of functionally

graded plates using a cell-

based smoothed three-

node plate element (CS-

MIN3) based on the C0-

HSDT

Computer Methods

in Applied

Mechanics and

Engineering

270: 15-36 2014 SCI

50.

P. Phung-Van, Chien

H. Thai, T. Nguyen-

Thoi, H. Nguyen-

Xuan

Static and free vibration

analyses of composite and

sandwich plates by an

edge-based smoothed


(ES-DSG3) using

triangular elements based

on layerwise theory

Composites Part B:

Engineering 60: 227-238 2014 SCI

51.

P. Phung-Van, T.

Nguyen-Thoi, H.

Luong-Van, C. Thai-

Hoang, H. Nguyen-

Xuan



(CS-FEM-DSG3) using

layerwise deformation

theory for dynamic

response of composite

plates resting on

viscoelastic foundation

Computer Methods

in Applied

Mechanics and

Engineering

272: 138-

159 2014 SCI

15


52.

P. Phung-Van, H.

Luong-Van, T.

Nguyen-Thoi, H.

Nguyen-Xuan



(CS-DSG3) based on the

higher-order shear

deformation theory for

dynamic responses of

Mindlin plates on the


subjected to a moving

sprung vehicle

International

Journal for

Numerical Methods

in Engineering

98(13):

988-1014 2014 SCI

53.

T. Nguyen-Thoi, P.

Phung-Van, S.

Nguyen-Hoang, Q.

Lieu-Xuan

A coupled alpha-FEM for

dynamic analyses of 2D

fluid-solid interaction

problems

Journal of

Computational and

Applied

Mathematics

271: 130-

149 2014 SCI

54.

P. Phung-Van, T.

Nguyen-Thoi, T.

Bui-Xuan, Q. Lieu-

Xuan



element (CS-MIN3) based

on the C0-type higher-

order shear deformation

for geometrically

nonlinear analysis of

laminated composite plates

Computational

Materials Science

96(Part B):

549 - 558 2014 SCI

55.

T. Nguyen-Thoi, T.

Bui-Xuan, P. Phung-

Van, S. Nguyen-

Hoang, H. Nguyen-

Xuan



element (ES-MIN3) for


analyses of plates

KSCE Journal of

Civil Engineering

18(4):

1072-1082 2014 SCIE

56.

T. Nguyen-Thoi, P.

Phung-Van, S.

Nguyen-Hoang, Q.

Lieu-Xuan

A smoothed coupled

NS/nES-FEM for dynamic

analysis of 2D fluid-solid

interaction problems

Applied

Mathematics and

Computation

232: 324-

346 2014 SCIE

57.

P. Phung-Van, T.

Nguyen-Thoi, H.

Dang-Trung, N.

Nguyen-Minh



(CS-FEM-DSG3) using

layerwise theory based on

the C0-type higher-order

shear deformation for


analyses of sandwich and

composite plates

Composite

Structures

111: 553-

565 2014 SCIE

58.

H. Nguyen-Van,N.

Nguyen-Hoai, T.

Chau-Dinh, T.

Nguyen-Thoi

Geometrically nonlinear

analysis of composite plate

and shell via a quadrilateral

element with good coarse-

mesh accuracy

Composite

Structures

112: 327–

338 2014 SCIE

59. T. Nguyen-Thoi, T.

Rabczuk, T. Lam-

Phat, V. Ho-Huu, P.

Free vibration analysis of

cracked Mindlin plate

using an extended cell-

Theoretical and

Applied Fracture

Mechanics

72: 150-163 2014 SCIE

16


Phung-Van based smoothed discrete

shear gap method (XCS-

DSG3)

60.

T. Nguyen-Thoi, P.

Phung-Van, M.H.

Nguyen-Thoi, H.

Dang-Trung

An upper-bound limit

analysis of Mindlin plates

using CS-DSG method

and second-order cone

programming

Journal of

Computational and

Applied

Mathematics

281: 32-48 2015 SCI

61.

Khader M. Hamdia,

Tom Lahmer, Trung

Nguyen-Thoi,

Timon Rabczuk

Predicting The Fracture

Toughness of PNCs: A

Stochastic Approach

Based on ANN and ANFIS

Computational

Materials Science

102: 304-

313 2015 SCI

62.

V. Ho-Huu, T.

Nguyen-Thoi, M.H.

Nguyen-Thoi, L. Le-

Anh

An improved constrained

differential evolution

using discrete variables

(D-ICDE) for layout

optimization of truss

structures

Expert Systems

with Applications

42: 7057-

7069 2015 SCI

63.

T. Nguyen-Thoi, P.

Phung-Van, V. Ho-

Huu, L. Le-Anh



(ES-FEM) for dynamic

analyses of 2D fluid-solid


KSCE Journal of

Civil Engineering

19(3): 641-

650 2015 SCIE

64.

Loc. V.

Tran, T.Nguyen-

Thoi, Chien. H.

Thai, H. Nguyen-

Xuan



(ES-DSG) using the C0-

type higher-order shear

deformation theory for

analysis of laminated

composite plates

Mechanics of

Advanced

Materials and

Structures

22(4): 248-

268 2015 SCIE

65.

T. Vo-Duy, N.

Nguyen-Minh, H.

Dang-Trung, A.

Tran-Viet, T.

Nguyen-Thoi

Damage assessment of

laminated composite beam

structures using damage

locating vector (DLV)

method

Frontiers of

Structural and Civil

Engineering

9(4): 457-

465 2015 SCIE

66.

M.H. Nguyen-Thoi,

L. Le-Anh, V. Ho-

Huu, T. Nguyen-

Thoi

An extended cell-based


gap method (XCS-DSG3)

for free vibration analysis

of cracked Reissner-

Mindlin shells

Frontiers of


Engineering

9(4): 341-

358 2015 SCIE

67.

Khader M. Hamdia,

Mohammed A.

Msekh, Mohammad

Silani, Nam Vu-Bac,

Xiaoying

Zhuang, Trung

Nguyen-Thoi,

Timon Rabczuk

Uncertainty quantification

of the fracture properties

of polymeric

nanocomposites based on

phase field modeling

Composite

Structures

133: 1177-

1190 2015 SCIE

17


68.

N. Nguyen-Minh, T.

Nguyen-Thoi, T.

Bui-Xuan, T. Vo-

Duy


analyses of stiffened

folded plates using a cell-

based smoothed discrete

shear gap method (CS-

FEM-DSG3)

Applied

Mathematics and

Computation

266: 212-

234 2015 SCIE

69.

L. Le-Anh, T.

Nguyen-Thoi, V.

Ho-Huu, H. Dang-

Trung, T. Bui-Xuan

Static and frequency

optimization of folded

laminated composite

plates using an adjusted

differential evolution

algorithm and a smoothed

triangular plate element

Composite

Structures

127: 382-

394 2015 SCIE

70.

T. Nguyen-Thoi,

M.H. Nguyen-Thoi,,

T. Vo-Duy, N.

Nguyen-Minh

Development of the cell-


shear gap plate element

(CS-FEM-DSG3) using

three-node triangles

International

Journal of

Computational

Methods

12(4),

1540015 2015 SCIE

71.

Jafar Amani, Erkan

Oterkus, P.M.

Areias, G. Zi, T.

Nguyen-Thoi,

Timon Rabczuk

A non-ordinary state-

based peridynamics

formulation for

thermoplastic fracture

International

Journal of Impact

Engineering

87: 83-94 2016 SCI

72.

Hai Le-The; Bao Ta-

Quoc; Hoa Le-

Thanh; Tao

Dong; Trung

Nguyen-Thoi, Frank

Karlsen

Geometric effects on

mixing performance in a

novel passive micromixer

with trapezoidal-zigzag

channels

Journal of

Micromechanics

and

Microengineering

25(9):

094004 2016 SCI

73.

V. Ho-Huu, T.

Nguyen-Thoi, T.

Vo-Duy, T. Nguyen-

Trang

An adaptive elitist

differential evolution for


structures with discrete

design variables

Computers and

Structures 165: 59-75 2016 SCI

74.

Pham-Toan

Thang, T. Nguyen-

Thoi

A new approach for

nonlinear dynamic

buckling of S-FGM

toroidal shell segments

with axial and

circumferential stiffeners

Aerospace Science

and Technology 53: 1-9 2016 SCI

75.

V. Ho-Huu, T. Vo-

Duy, T. Luu-Van, L.

Le-Anh, T. Nguyen-

Thoi

Optimal design of truss

structures with frequency

constraints using

improved differential

evolution algorithm based

on an adaptive mutation

scheme

Automation in

Construction 68: 81-94 2016 SCI

18


76.

Wei Zeng, Gui-Rong

Liu, Chen

Jiang, Trung

Nguyen-Thoi, Yong

Jiang

A generalized beta finite

element method with

coupled smoothing

techniques for solid

mechanics

Engineering

Analysis with

Boundary Elements

73: 103-119 2016 SCI

77.

Le Duc Thang, Ho

Huu Vinh, Nguyen

Thoi Trung,

Nguyen Quoc Hung

A new design approach

based on differential

evolution algorithm for

geometric optimization of

magnetorheological brakes

Smart Materials

and Structures

25(12):

125020 2016 SCI

78.

T. Nguyen-Thoi, L.

Le-Anh, V. Ho-Huu,

T. Nguyen-Trang

An effective reliability-

based Improved

Constrained Differential

Evolution for reliability-

based design optimization

of truss structures

Advances in

Engineering

Software

92: 48-56 2016 SCIE

79.

Pham-Toan

Thang, T. Nguyen-

Thoi, Jaehong Lee

Closed-form expression

for nonlinear analysis of

imperfect sigmoid-FGM

plates with variable

thickness resting on elastic

medium

Composite

Structures

143: 143 -

150 2016 SCIE

80.

V. Ho-Huu, T.D.

Do-Thi, H. Dang-

Trung, T. Vo-

Duy, T. Nguyen-

Thoi

Optimization of laminated

composite plates for

maximizing buckling load

using improved

differential evolution and


method

Composite

Structures

146: 132-

147 2016 SCIE

81.

T. Vo-Duy, V. Ho-

Huu, H. Dang-

Trung, T. Nguyen-

Thoi

A two-step approach for

damage detection in

laminated composite

structures using modal

strain energy method and

an improved differential

evolution algorithm

Composite


82.

T. Nguyen-Thoi, T.

Rabczuk, V. Ho-

Huu, L. Le-Anh, H.

Dang-Trung, T. Vo-

Duy

An extended cell-based

smoothed three-node

Mindlin plate element

(XCS-MIN3) for free

vibration analysis of

cracked FGM plates

International

Journal of

Computational

Methods

14(1):

1750011 2016 SCIE

83.

N. Vu-Bac, T.

Lahmer, X.

Zhuang, T. Nguyen-

Thoi, T. Rabczuk

A software framework for

probabilistic sensitivity

analysis for

computationally expensive

models

Advances in

Engineering

Software

100: 19-31 2016 SCIE

19


84.

Pham Toan

Thang, Nguyen-

Thoi T

Effect of stiffeners on

nonlinear buckling of

cylindrical shells with

functionally graded

coatings under torsional

load

Composite

Structures

153: 654-

661 2016 SCIE

85.

Pham Toan Thang,

Nguyen Dinh

Duc, Nguyen-Thoi

T

Effects of variable

thickness and imperfection

on nonlinear buckling of

sigmoid-functionally

graded cylindrical panels

Composite


86.

Ao Hung

Linh, Nguyen Thoi

Trung, Ho Huu

Vinh, Le Anh Linh,

Nguyen Trang Thao,

Chau Minh Quang

Backtracking search

optimization

algorithm and its

application for roller

bearing fault diagnosis

International

Journal of

Acoustics and

Vibration

21(4): 445-

452 2016 SCIE

87.

H. Dang-Trung, H.

Luong-Van, T.

Nguyen-Thoi, K.K.

Ang

Analyses of stiffened

plates resting on the


subjected to a moving load

by a cell-based smoothed

triangular plate element

International

Journal of

Structural Stability

and Dynamics

16(10):

1750011 2016 SCIE

88.

T. Vo-Duy, V. Ho-

Huu, T.D. Do-Thi,

H. Dang-Trung, T.

Nguyen-Thoi

A global numerical

approach for lightweight

design optimization of

laminated composite

plates subjected to

frequency constraints

Composite

Structures

159: 646-

655 2017 SCIE

89.

T. Banh-Thien, H.

Dang-Trung, L. Le-

Anh, V. Ho-Huu, T.

Nguyen-Thoi

Buckling analysis of non-

uniform thickness

nanoplates in an elastic

medium using the

Isogeometric analysis

Composite

Structures

162: 182-

193 2017 SCIE

90. Pham-Toan Thang,

Nguyen-Dinh Duc,

T. Nguyen-Thoi

Thermomechanical

buckling and post-

buckling of cylindrical

shell with functionally

graded coatings and

reinforced by stringers

Aerospace Science


91.

Nguyen Dinh Duc,

Jaehong Lee, T.

Nguyen-Thoi, Pham

Toan Thang

Static response and free

vibration of functionally

graded carbon nanotube-

reinforced composite

rectangular plates resting

on Winkler-Pasternak

elastic foundations

Aerospace Science


20


92.

K. Nguyen-Quang,

H. Dang-Trung, V.

Ho-Huu, H. Luong-

Van, T. Nguyen-

Thoi

Analysis and control of

FGM plates integrated

with piezoelectric sensors

and actuators using cell-


shear gap method (CS-

DSG3)

Composite

Structures

165: 115-

129 2017 SCIE

93.

D. Dinh-Cong, T.

Vo-Duy, N. Nguyen-

Minh, V. Ho-Huu, T.

Nguyen-Thoi

A two-stage assessment

method using DLV

method and DE algorithm

for damage identification

of cross-ply laminated

composite beams

Advances in

Structural

Engineering

20(12):

1807-1827 2017 SCIE

94.

T. Vo-Duy, D.

Duong-Gia, V. Ho-

Huu, H.C. Vu-Do, T.

Nguyen-Thoi

Multi-objective

optimization of laminated

composite beam structures

using NSGA-II algorithm

Composite

Structures

168, 498-

509 2017 SCIE

95.

Tai Vo-Van, Trung

Nguyen-Thoi, Trung

Vo-Duy, Vinh Ho-

Huu, Thao Nguyen-

Trang

Modified Genetic

Algorithm-based

Clustering for Probability

Density Functions

Journal of

Statistical

Computation and

Simulation

87:10,

1964-1979 2017 SCIE

96.

Sy Dzung Nguyen,

Huu-Vinh Ho, Thoi-

Trung Nguyen,

Nang Toan Truong,

Tae-Il Seo

Novel fuzzy sliding

controller for MRD

suspensions subjected to

uncertainty and

disturbance

Engineering

Applications of

Artificial

Intelligence

61: 65–76 2017 SCIE

97.

D. Dinh-Cong, T.

Vo-Duy, V. Ho-Huu,

H. Dang-Trung, T.

Nguyen-Thoi

An efficient multi-stage

optimization approach for

damage detection in plate

structures

Advances in

Engineering

Software

112, 76-87 2017 SCIE

98.

Duy Dat Vo,

Aleksey Lipnitskii,

Truong Khang

Nguyen, Thoi

Trung Nguyen.

Nitrogen trapping ability of

Hydrogen-induced vacancy

and the formation of AlN

layer on Aluminum surface.

Coatings 7(6): 79 2017 SCIE

99.

L. Le-Anh, T. Bui-

Vinh, V. Ho-Huu,

T. Nguyen-Thoi.

An efficient coupled

numerical method for

reliability-based design

optimization of steel

frames

Journal of

Constructional

Steel Research

138: 389-

400 2017 SCIE

100.

T. Nguyen-Sy, A.D.

Tran-Le, T. Nguyen-

Thoi, T. Langlet

A multi-scale

homogenization approach

for the effective thermal

conductivity of dry lime–

hemp concrete

Journal of Building

Performance

Simulation

11(2): 179-

189 2018 SCIE

21


101.

D. Dinh-Cong, V.

Ho-Huu, T. Vo-Duy,

H.Q. Ngo-Thi, T.

Nguyen-Thoi

Efficiency of Jaya

algorithm for solving the

optimization-based

structural damage

identification problem

based on a hybrid

objective function

Engineering

Optimization

50(8):

1233-1251 2018 SCIE

102.

T. Nguyen-Thoi, A.

Tran-Viet, N.

Nguyen-Minh; T.

Vo-Duy, V. Ho-Huu

A combination of damage

locating vector method

(DLV) and differential

evolution algorithm (DE)

for structural damage

assessment

Frontiers of


Engineering

12(1): 92-

108 2018 SCIE

103.

V. Ho-Huu, T.

Nguyen-Thoi, T.

Khac-Truong, L. Le-

Anh, T. Vo-Duy

An improved differential

evolution based on

roulette wheel selection

for shape and size


structures with frequency

constraints

Neural Computing

and Applications

29(1): 167-

185 2018 SCIE

104.

K. Nguyen-Quang,

T. Vo-Duy, H. Dang-

Trung, T. Nguyen-

Thoi

An isogeometric approach

for dynamic response of

laminated FG-CNT


plates integrated with

piezoelectric layers

Computer Methods

in Applied

Mechanics and

Engineering

332:25-46 2018 SCI

105.

N. Nguyen-Minh, N.

Tran-Van, T. Bui-

Xuan, T. Nguyen-

Thoi.

Static analysis of

corrugated panels using

homgenization models and

a cell-based smoothed

mindlin plate element

(CS-MIN3).

Frontiers of


Engineerin

13(2): 251-

272 2018 SCIE

106.

T. Vo-Duy, V. Ho-

Huu, T. Nguyen-

Thoi.


laminated FG-CNT


beams using finite element

method.

Frontiers of


Engineering

13(2): 324-

336 2018 SCIE

107.

T. Nguyen-Thoi, T.

Bui-Xuan, GR. Liu,

T. Vo-Duy


analysis of stiffened flat

shells by a cell-based


gap method (CS-FEM-

DSG3) using three-node

triangular elements

International

Journal of

Computational

Methods

15(6):

1850056 2018 SCIE

108.

C. Le-Quoc, Linh A.

Le, V. Ho-Huu,

Huynh P.D, T.

Nguyen-Thoi

An Immersed Boundary

Proper Generalized

Decomposition (IB-PGD)

for fluid-structure


International

Journal of

Computational

Methods

15(6):

1850045 2018 SCIE

22


109.

T. Vo-Duy, T.

Truong-Thi, V. Ho-

Huu, T. Nguyen-

Thoi.

Frequency optimization of

laminated FG-CNT


quadrilateral plates using

smoothed FEM and

evolution algorithm

Journal of

Composite

Materials

52(14):

1971-1986 2018 SCIE

110.

Nhan Nguyen-Minh,

Nha Tran-Van,

Thang Bui-Xuan,

Trung Nguyen-

Thoi.


corrugated panels using

homogenization methods

and a cell-based smoothed

Mindlin plate element

(CS-MIN3)

Thin-Walled

Structures,

124: 184-

201 2018 SCIE

111.

V. Ho-Huu, L. Le-

Anh, T. Nguyen-

Thoi

A global single-loop

deterministic algorithm for


optimization of structures

with continuous and

discrete design variables

Engineering

Optimization

50(12):

2071-2019 2018 SCIE

112.

Vinh Ho-Huu, Trung

Vo-Duy, Trung

Nguyen-Thoi, Dung

Duong, Thang Le-

Duc

An efficient combination

of multi-objective

evolutionary optimization

and reliability analysis for



structures

Expert Systems

with Applications

102: 262-

272 2018 SCIE

113.

Pham Toan Thang, T

Nguyen-Thoi,

Dongkyu Lee,

Joowon Kang,

Jaehong Lee

Elastic buckling and free

vibration analyses of

porous-cellular plates with

uniform and non-uniform

porosity distributions

Aerospace Science


114.

T. Truong-Thi, T.

Vo-Duy, V. Ho-Huu,

T. Nguyen-Thoi*


analyses of functionally

graded carbon nanotube


plates using CS-DSG3

International

Journal of

Computational

Methods

1850133 2018 SCIE

115.

D. Dinh-Cong, T.

Vo-Duy, T. Nguyen-

Thoi*

Damage assessment in

truss structures with

limited sensors using a

two-stage method and

model reduction

Applied Soft

Computing 66: 264-277 2018 SCIE

116.

Pham Toan Thang,

T. Nguyen-Thoi,

and Jaehong Lee

Mechanical stability of

metal foam cylindrical

shells with various

porosity distributions

Mechanics of

Advanced

Materials and

Structure

1-9 2018 SCIE

117.

D. Dinh-Cong, H.

Dang-Trung, T.

Nguyen-Thoi*

An efficient approach for

optimal sensor placement

and damage identification

in laminated composite

structures

Advances in

Engineering

Software

119: 48-59 2018 SCIE

https://www.sciencedirect.com/science/article/pii/S127096381830172X





23


118.

V Ho-Huu, T Vo-

Duy, D Duong-Gia,

T Nguyen-Thoi

An efficient procedure for

lightweight optimal design

of composite laminated

beams

Steel and

Composite

Structures

27(3): 297-

310 2018 SCIE

119.

Ho Kieu Diem, Vo

Duy Trung, Nguyen

Thoi Trung, Vo Van

Tai, Nguyen Trang

Thao

A differential evolution-

based clustering for

probability density

functions

IEEE Access 6: 41325-

41336 2018 SCIE

120.

D. Dinh-Cong, T.

Vo-Duy, V. Ho-Huu,

T. Nguyen-Thoi

Damage assessment in

plate-like structures using

a two-stage method based

on modal strain energy

change and Jaya algorithm

Inverse Problems in

Science and

Engineering

27(2): 166-

189 2019 SCIE

121.

T Nguyen-Trang, T

Nguyen-Thoi, T

Truong-Khac, AT

Pham-Chau,

HungLinh Ao

An Efficient Hybrid

Optimization Approach

Using Adaptive Elitist

Differential Evolution and

Spherical Quadratic

Steepest Descent and Its

Application for Clustering

Scientific

Programming

Article ID

7151574,

15 pages

2019 SCIE

122.

Pham Toan Thang,

T. Nguyen-Thoi,

Jaehong Lee

Closed-form solution for

nonlinear buckling

analysis of FG-CNTRC

cylindrical shells with

initial geometric

imperfections

European Journal

of Mechanics -

A/Solids

73: 483-

491. 2019 SCI

2. International books and national Books: 02 books

No Authors Title Publisher Year Rank

1 G. R. Liu, Nguyen

Thoi Trung

Smoothed Finite Element

Methods

CRC-Press,

NewYork 2010

2 Nguyen Thoi

Trung, Nguyen

Xuan Hung

Finite element Method using

Matlab. Construction

Publishing House

Hanoi,

Vietnam, 2015

IV. Editorships

Editor Board of SCIE journal: Mathematical Problems in Engineering (From 2011 - 2015).

Deputy Editor in Chief of Journal of Advanced Engineering and

Computation (JAEC) (Since 5/2017 to now).

International Editor Board, Journal of Computational Applied

Mechanics (JCAMECH) (ESCI, Emerging Sources Citation Index) (Since 2/2018 to now).

http://jaec.tdt.edu.vn/

https://jcamech.ut.ac.ir/journal/editorial.board#edb42

24

V. Refereeing/reviewing service

No Journal Publisher Rank

1. International Journal for Numerical

Methods in Engineering John Wiley & Sons Inc. SCI

2. Computer Methods in Applied

Mechanics and Engineering Elsevier BV

SCI

3. KSCE Journal of Civil Engineering Springer Verlag SCIE

4. International Journal of

Computational Methods World Scientific Publishing Co

SCIE

5. Computers and Structures Elsevier Ltd. SCI

6. Finite elements in analysis and design Elsevier BV SCI

7. Engineering Analysis with Boundary

Elements Elsevier Ltd.

SCI

8. Computational Materials Science Elsevier BV SCI

9. European Journal of Mechanics –

A/Solid Elsevier BV

SCI

10. Thin Wall Structures Elsevier BV SCI

11. Expert Systems With Applications Elsevier Ltd. SCI

12. Engineering Computations Emerald Group Publishing Ltd. SCIE

13. Journal of Thermoplastic Composite

Materials SAGE Publications

SCIE

14. Advances in Materials Science and

Engineering Hindawi Publishing Corporation

SCIE

15. Composite Structures Elsevier BV SCIE

16. Applied Mathematical Modelling Elsevier BV SCI

17. Vietnam Journal of Mechanics

18. Journal of Advanced Engineering and

Computation Ton Duc Thang University

VI. Scientific awards

No Name of awards Organization Years

1 Silver medal upon graduation

Ho Chi Minh City University

of Technology (HCMUT) –

Vietnam National University–

HCM- Vietnam

1999

25

No Name of awards Organization Years

2 A three-month scholarship in

Belgium master program EU-EMMC 2002 - 2003

3 PhD scholarship National University of

Singapore 2005 – 2009

4 President graduate fellowship

of NUS (Singapore)

National University of

Singapore 2007 – 2008

5 Best PhD Thesis award

(Singapore)

National University of

Singapore 2011

6 Excellence research award Vietnam National University –

HCMC

2011, 2012,

2013

7 Excellence research award Ton Duc Thang University 2013, 2014

8 Exceptional Excellence

research award Ton Duc Thang University 2017

9 Lifetime achievement award Ton Duc Thang University 2018

VII. Reference

Professor Duc. T. Nguyen, Civil and Environmental Engineering Department, Old

Dominion University (ODU), & Director, Multi-disciplinary Parallel-Vector

Computation Institute, ODU, USA. Email: [email protected];

http://eng.odu.edu/cee/directory/dnguyen.shtml.

- Professor Gui-Rong Liu, Professor and Ohio Eminent Scholar, School of Aerospace

Systems, College of Engineering and Applied Science, University of Cincinnati, USA,

Email: [email protected].

- Associate. Prof. Nguyen Quoc Hung, Head of Research Management Department;

Vice Dean of Engineering Faculty; Senior Lecturer in Structural Dynamics &

Mechatronics; Vietnamese Germany University (VGU). Email:

[email protected]

- Professor Dr.-Ing Timon Rabczuk, Institute of Structural Mechanics (ISM), Bauhaus-

University Weimar, Germany, E-mail: [email protected]

VIII. Other Information

H-Index (Scopus): 43 (citation = 5815) (updated on 31th May 2019)

Link_(Scopus):

https://www.scopus.com/authid/detail.uri?origin=resultslist&authorId=24171745600&zone=

H-Index (Google Scholar): 47 (citation = 7544) (updated on 31th May 2019)

Link (Google Scholar): http://scholar.google.com.vn/citations?hl=vi&user=hE7o5mMAAAAJ

mailto:[email protected]

http://eng.odu.edu/cee/directory/dnguyen.shtml



http://scholar.google.com.vn/citations?hl=vi&user=hE7o5mMAAAAJ

Documents

SCIENTIFIC CURRICULUM VITAE · 1. Full name: NGUYEN THOI TRUNG 2. Birthday: 06/12/1976 3. Sex: Male 4. Profession: Researcher, Lecturer 5. Academic degree: PhD Year of issue: 2010