Schneider Electric wiring devices, lighting control & automation

Schneider Electric wiring devices, lighting control & automation

Product catalogue

2

Look for energy saving products throughout this edition

Electrical solutions

Lighting control & automationEnvironmental considerations and rising energy costs mean we all need to make the most of the energy we use. Innovative products such as dimmers, PIR sensors and thermostats do more with less.

Wiring accessoriesSchneider Electric provide a comprehensive range of wiring accessories that guarantee quality, flexibility, safety and performance with practical features that save the installer time and energy.

3

Lighting control & automation KNX ......................................................................................................... 6-75

Wireless lighting control .........................................................................76-99

Connect ..............................................................................................76-91 Sphere .................................................................................................92-95

ULTI .......................................................................................................96-99

Data networking ................................................................................... 100-103

LexCom Performance ......................................................... 100-103

Wiring accessoriesUltimate ..................................................................................................... 106-181

Slimline white moulded ...................................................... 107-121

Part M solutions ...................................................................... 122-131

Screwless flat plate ............................................................... 132-149

Flat plate ..................................................................................... 150-167

Low profile .................................................................................. 168-181

Exclusive ................................................................................................... 182-207

Square edge white moulded ........................................... 183-188

Decorative .................................................................................. 189-192

Metal clad ................................................................................... 193-200

T2 ceiling accessories ......................................................... 201-207

Energy efficiency. ................................................................................ 208-211

Occupancy sensors .............................................................. 208-211

High impact resistant. ....................................................................... 212-219

E-Series polycarbonate ...................................................... 212-219

Weatherproof ........................................................................................ 220-226

IP55 & IP66 .............................................................................. 220-224

Kavacha ....................................................................................... 225-226

Industrial switchgear .......................................................................... 227-232 56 Series ..................................................................................... 227-232

Technical information ......................................................................233-257

Alpha code index ...........................................................................................258

Contents

For more information call us on 0870 608 8 608 or click on www.schneider-electric.com/uk

4

How to make your building smart

Lighting control & automation

Lighting control & automationKNX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-75

Wireless lighting controlConnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76-91

Sphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92-95

ULTI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96-99

Data networking LexCom Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100-103

Technical information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233-248

Meeting the needs of the way we live and work today takes more than just a pretty face, it takes innovative products designed to deliver the high levels of control, adaptability, connectivity and energy efficiency demanded by 21st Century consumers.

Imagine building functions which can be adapted to the needs of the user easily and cost effectively, with minimal disruption. Schneider Electric provide the ideal lighting control & automation solutions, to help you meet the installation requirements.

5

6

Delivering intelligence

7

KNXGlobally valid standardKNX is a global standard used by over 200 manufacturers worldwide.

Certified system All KNX products – regardless of manufacturer – are certified by the KNX Association, which guarantees their compatibility and interoperability.

Cost efficiency KNX guarantees savings on energy consumption and hence on energy costs too.

Flexibility via expandability The KNX system can be easily adapted with minimum interruption should the building requirements change.

KNXPower supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-11

System components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13

Interfaces / gateways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Push-buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-17

Binary inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-22

Presence detectors & movement detectors . . . . . . . . . . . . 23-28

Other sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-33

Switch actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-47

Blind / switch actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-55

Dimming actuators / control units . . . . . . . . . . . . . . . . . . . . . 56-63

Control & display devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65

Room temperature control units. . . . . . . . . . . . . . . . . . . . . . . 66-73

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74-75

8


KNXOverview of power supplies

KNX power supply REG‑K KNX power supply REG‑K with emergency power input

Article number MTN684016 MTN684032 MTN684064 MTN683816 MTN683832 MTN683890

Output current 160 mA 320 mA 640 mA 160 mA 320 mA 640 mA

Maximum number of bus devices 32 64 64 32 64 64

Input voltage, 50‑60 Hz AC 110-230 V AC 110-230 V

Output voltage DC 30 V DC 30 V

Device width 4 modules 4 modules

Connections and displays

LED display for maximum current

Reset switch

Connection for emergency power supply art. no. MTN683901

—

9


KNX

KNX power supply REG‑K/160 mA

MTN684016

For generating the bus voltage for a line with up to 32 bus devices.With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n Nominal voltage: AC 110-230 V ±10% n Operating voltage: min. AC 92 V - max. AC 253 V n Mains frequency: 50-60 Hz ±10% n Output voltage: DC 30 V n Output current: max. 160 mA, short-circuit-proof n Device width: 4 TE = approx. 72 mmn Contents: With bus connecting terminal and cable cover.

Part number Description QtyMTN684016 Light grey 1

KNX power supply REG‑K/160 mA with emergency power input

MTN683816

For generating the bus voltage for a line with up to 32 bus devices. The emergency power supply REG can be connected in order to buffer the bus voltage.With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n Nominal voltage: AC 110-230 V ±10% n Operating voltage: min. AC 92 V - max. AC 253 V n Mains frequency: 50-60 Hz ±10% n Output voltage: DC 30 V n Output current: max. 160 mA, short-circuit-proof n Device width: 4 TE = approx. 72 mmn Accessories: REG emergency power supply MTN683901n Contents: With bus connecting terminal and cable cover.


10


KNX


MTN684032

For generating the bus voltage for a line with up to 64 bus devices. With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n Nominal voltage: AC 110-230 V ±10% n Operating voltage: min. AC 92 V - max. AC 253 V n Mains frequency: 50-60 Hz ±10% n Output voltage: DC 30 V n Output current: max. 320 mA, short-circuit-proof n Device width: 4 TE = approx. 72 mmn Contents: With bus connecting terminal and cable cover.



MTN683832

For generating the bus voltage for a line with up to 64 bus devices. The emergency power supply REG can be connected in order to buffer the bus voltage. With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n Nominal voltage: AC 110-230 V ±10% n Operating voltage: min. AC 92 V - max. AC 253 V n Mains frequency: 50-60 Hz ±10% n Output voltage: DC 30 V n Output current: max. 320 mA, short-circuit-proof n Device width: 4 TE = approx. 72 mmn Accessories: REG emergency power supply MTN683901n Contents: With bus connecting terminal and cable cover.



MTN684064

For generating the bus voltage for a line with up to 64 bus devices. With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n Nominal voltage: AC 110-230 V ±10% n Operating voltage: min. AC 92 V - max. AC 253 V n Mains frequency: 50-60 Hz ±10% n Output voltage: DC 30 V n Output current: max. 640 mA, short-circuit-proof n Device width: 4 TE = approx. 72 mmn Contents: With bus connecting terminal and cable cover.



MTN683890

For generating the bus voltage for a line with up to 64 bus devices. The emergency power supply REG can be connected in order to buffer the bus voltage. With integrated choke to decouple the power supply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n Nominal voltage: AC 110-230 V ±10% n Operating voltage: min. AC 92 V - max. AC 253 V n Mains frequency: 50-60 Hz ±10% n Output voltage: DC 30 V n Output current: max. 640 mA, short-circuit-proof n Device width: 4 TE = approx. 72 mmn Accessories: REG emergency power supply MTN683901n Contents: With bus connecting terminal and cable cover.


11


KNX

REG emergency power supply

MTN683901

To buffer the bus voltage. If a complete mains failure occurs, an external lead gel battery with a voltage of DC 12 V (SELV) can be connected to the REG power supply for buffering. The lead gel battery is recharged or maintained in its charged state by integrated charging electronics.A binary input can be connected in order to register the operational statuses (mains voltage, error warning, battery operation).For installation on DIN rails TH35 according to EN 60715. A data rail is not necessary.n Nominal voltage: AC 110-230 V ±10%n Operating voltage: min. AC 92 V - max. AC 253 Vn Mains frequency: 50-60 Hz ±10%n Output to power supply: n Output voltage: DC 30 V ±2 Vn Output current: without battery with mains supply max. 300 mA, with battery without mains supply max. 640 mAn Short-circuit current: < 1.5 An Charging current: max. 1 An Connections: plug-in screw terminal for main connector, operating state (4-pin, 3 floating contacts) and emergency power supply. Plug-in terminal for battery connection (two 1 mm pins)n Device width: 4 modules = approx. 72 mmn In KNX, to be completed with: KNX power supply REG-K/160 mA with emergency power input MTN683816, KNX power supply REG-K/320 mA with emergency power input MTN683832, KNX power supply REG-K/640 mA with emergency power input MTN683890n Accessories: Lead gel battery MTN668990, MTN668991, Binary input REG-K/4x24 MTN644892, Power supply REG, 24 V DC / 0.4 A MTN693003n Contents: With connecting terminal and cable cover


Lead gel battery

MTN668990

MTN668991

Lead gel battery to connect to the emergency input of the power supply 320 REG-K with battery connection.n Nominal voltage: DC 12 V n In KNX, to be completed with: REG emergency power supply MTN683901

Part number Description QtyMTN668990 7.2 Ah capacity 1

MTN668991 18 Ah capacity

12


KNX

Coupler REG‑K

MTN680204

For logical connection and electrical isolation of lines and areas.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n Device width: 2 modules = approx. 36 mmn Contents: With 2 bus connecting terminals.


Bus connecting terminal

MTN689701

For connecting max. 4 core pairs to an KNX device, can also be used as a branch terminal.Consists of two interlocked terminal parts in red (“+”) and dark grey (“-”), each with 4 plug-in terminals. For solid conductors with a diameter of 0.6 to 0.8 mm.n Contents: 1 PU = 50 terminals.

Part number Description QtyMTN689701 Red/dark grey 1

Branch terminal, yellow/white

MTN689702

Branch terminal comprising two interlocking terminal parts in yellow and white, each with 4 plug-in terminals. For solid conductors with a diameter of 0.6 to 0.8 mm. For wiring the yellow/white cores of the bus cable.n Contents: 1 PU = 50 terminals.

Part number Description QtyMTN689702 Yellow/white 1

IR remote control Distance 2010

MTN570222

10 channel IR remote control. For the control of all TELE sensor covers, blind push-buttons with IR receiver, presence detectors with IR receivers and KNX devices with IR receivers.n Battery: 2 microcells (IEC LR 03, AAA) n Range: up to 20 mn Receiver: TELE sensor cover System M MTN5779.., MTN5703.., Artec/Trancent/Antique MTN5709.., Blind push-button with IR receiver and sensor connection System M MTN5880.., MTN5864.., Artec/Trancent/Antique MTN5844.., ARGUS Presence with IR receiver and for extension unit operation MTN550591, Push-button, 4-gang plus with IR receiver System M MTN6279.., MTN6175.., Artec/Trancent/Antique MTN6284.., KNX 1-gang push-button with IR receiver Altira , Unica , Unica Top , Unica , Unica Top , Unica n Contents: Without battery.

Part number Description QtyMTN570222 Black 1

KNX/IP router REG‑K

MTN680329

The KNX/IP router enables telegrams to be forwarded between different lines via LAN (IP) as a rapid backbone. The device can additionally serve as a programming interface in order to connect a PC with the KNX bus (e.g. for ETS programming with suitable ETS).The IP address can be assigned dynamically via a DHCP server or via manual configuration (ETS parameter). The device operates in accordance with the KNXnet/IP specification using Core, device management, tunnelling and routing. The KNX/IP router forwards telegrams in both directions whilst taking a filter table into account and can buffer up to 150 telegrams.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n Supply voltage: DC 12-30 V (at DC 24 V 40 mA), AC 12-24 Vn Device width: 2 modules = approx. 36 mmn In KNX, to be completed with: Power supply REG, 24 V DC / 0.4 A MTN693003, Power supply REG, 24 V DC / 1.25 A MTN693004, Power supply REG, AC 24 V/1 A MTN663529, Also alternatively Power over Ethernet (PoE).n Contents: With bus connecting terminal.


13


KNX

KNX Logic module Basic REG‑K

MTN676090

In KNX installations, the logic module serves as a logic and control device. It has 10 logic, 10 filter/timer, 8 converter and 12 multiplexer modules. With 3 freely programmable push-buttons and 3 status LEDs. They can be assigned control and test functions and can be operated on the device.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.KNX software functions: 10 logic modules (AND, OR, XOR)Each with up to 8 binary input objects and an output object.n Input and output object inversion.n Output disable via gate function.n Behaviour of each input object after bus reset.n Adjustable sending behaviour.10 filter and timer modulesn Binary input objects and an output object with time delays.n Binary input object filtering before output.n Output disable via gate function.n Behaviour of each input object after bus reset.n Adjustable sending behaviour.8 converter modulesn Conversion of 1 bit switching telegrams into 2 bit priority control.n Conversion of 1 bit switching telegrams into 8 bit value telegrams.n Conversion of 8 bit value telegrams into 1 bit switching telegrams.n Output disable via gate function.n Behaviour of each input object after bus reset.n Adjustable sending behaviour.12 multiplexer modules (lighting control) Multiplexer modules are used to selectively control telegrams, e.g. to toggle between single room and total room control for conference rooms with partition walls.n Supported telegram formats by module: 1 bit, 2 bit, 4 bit, 8 bit , 2 byte.n A module can be used for the 4 byte format.n Telegram forwarding/blocking in one or both directions using the control object.n Adjustable gate behaviour.n Adjustable control object behaviour.n Output disable via gate function.n Adjustable sending behaviour.n Adjustable sending delay.Push‑button and LED assignmentn The three push-buttons and the three LEDs can be freely assigned with binary objects.n Behaviour per LED.n Behaviour per push-button.Behaviour after bus resetn Adjustable module start-up delay after bus voltage recovery.n Device width: 2.5 module = approx. 45 mm


14


KNX

USB interface REG‑K

MTN681829

For connecting a programming or diagnostics device with a USB1.1 or USB2 interface to the KNX.With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n Device width: 2 modules = approx. 36 mmn Contents: With bus connecting terminal and cable cover.


KNX DALI gateway REG‑K/1/16(64)/64/IP1

MTN67250001

The KNX DALI gateway connects KNX to the DALI bus. The gateway is a control device in category I with an integrated DALI power supply for the EBs (electronic control gear).It supports the switching and dimming of up to 64 EBs in 16 groups and the control up to 16 scenes. In addition, the 64 EBs can be individually controlled or combined via KNX group addresses. Error messages of individual EBs or each connected lamp can be transmitted to the KNX and visualised. DALI commissioning and configuration, as well as group assignment and scene setting, can be carried out using:n The device (display and operating buttons which can be optionally disabled)n The integrated Web serverWith integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Switching, dimming and value object per group and EB. Staircase timer function, status objects, delays between status feedbacks. Detailed error messages per EB and group. Two separate user profiles with their own password. Test of DALI EBs for emergency lighting with central battery or built-in battery with selectable test intervals. Parallel broadcast triggering of all EBs, switch-on/switch-off. Dimming speeds for relative dimming and dimming values. Dimming value max./min. Various modes (normal, permanent, night, panic). Effect module with 16 effects and a total of up to 500 steps. Operating hours counter and automatic burn-in per EB.Functions: Web server:Access via the LAN network using a PC, PDA or web panel. Commissioning is also made easier using a WLAN adapter. The internal web pages can be used to start up the device, and to configure, operate and display all important functions. - Configuring: scenes, effects, service, maintenance, burn-in, operating hours - Operating: device, EBs and groups - Displays: Status and error messagesn Supply voltage: AC/DC 100-240 V, 50/60 Hz n Outputs: DALI D+, D-, DC 16-18 V (basic insulation, not SELV), max. 250 mA, short circuit-proof n Interfaces: KNX, Ethernet RJ-45, DALI n Type: Control device in category I (single master) n Wire range: Supply or DALI: 1.5-2.5 mm² n Type of protection: IP 20 n Device width: 4 modules = approx. 72 mmn Contents: With bus connecting terminal.

Part number Description Qty

MTN67250001 Light grey 1

15


KNX

Push‑button, 1‑gang plus

MTN617119

With integrated bus coupling unit.Push-button with 2 operating buttons, operating and status display and labelling field. The operating displaycan also be used as an orientation light.The device is connected to the bus line with a bus connecting terminal.n KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulseedges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with2-byte telegrams (distinction between short and long operation), 8-bit linear regulator, scene retrieval, scenesaving, disable functions.n Accessories: Labelling sheets for push-buttons MTN6183..n Contents: With protective hood for plaster.With bus connecting terminal.

Part number Description QtyMTN617119 Polar white 1

MTN627514 Anthracite 1

MTN627560 Aluminium 1


MTN617219

With integrated bus coupling unit. Push-button with 4 operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light.The device is connected to the bus line with a bus connecting terminal.n KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte telegrams (distinction between short and long operation), 8-bit linear regulator, scene retrieval, scene saving, disable functions.n Accessories: Labelling sheets for push-buttons MTN6183..n Contents: With protective hood for plaster. With bus connecting terminal.




16


KNX


MTN617419

With integrated bus coupling unit. Push-button with 8 operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light.The device is connected to the bus line with a bus connecting terminal.n KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte telegrams (distinction between short and long operation), 8-bit linear regulator, scene retrieval, scene saving, disable functions.n Accessories: Labelling sheets for push-buttons MTN6183..n Contents: With protective hood for plaster. With bus connecting terminal.


MTN617419 Polar white 1



Ultimate screwless flat plate KNX framesPart number Description QtyGU8434** 1 module 1

GU8434PC

GU8434BN

GU8434PN

Note Replace ** with suffix code to denote finish required:SS Stainless steel PB Polished brass PW Painted whitePC Polished chrome PN Pearl nickel BN Black nickel

17


KNX

Push‑button, 4‑gang plus with IR receiver

MTN617519

With integrated bus coupling unit. Push-button with 8 operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light.The functions of each of the keys can be triggered using an IR remote control. The push-button is pre-programmed for operation with a Merten IR remote control Distance. Many other IR remote controls (e.g. existing TV or CD player remote controls) can be taught into the push-buttons. The device is connected to the bus line with a bus connecting terminal.n KNX software functions: Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte telegrams (distinction between short and long operation), 8-bit linear regulator, scene retrieval, scene saving, disable functions.Accessories: Labelling sheets for multi-function push-button with IR receiver System M MTN6184 ..n Transmitter: IR remote control Distance 2010 MTN570222n Contents: With protective hood for plaster. With bus connecting terminal.





Labelling sheets for push‑buttons

MTN618319

For individual labelling of the push-buttons with text or symbols.n Accessories from: Push-button, 1-gang plus MTN6275.., MTN6171.., Push-button, 2-gang plus MTN6276.., MTN6172.., Push-button, 4-gang plus MTN6278.., MTN6174..n Contents: 1 sheet for every 28 products.


MTN618320 Silver 1

Labelling sheets for multi‑function pushbutton with IR receiver

MTN618419

For individual labelling of the multi-function push-button with IR receiver.n Accessories from: Push-button, 4-gang plus with IR receiver MTN6279.., MTN6175..n Contents: 1 sheet for every 28 products.


MTN618420 Silver 1

18


KNXOverview binary inputs

Push‑button interface plus Binary input REG‑K/x10 Binary input REG‑K/x24 Binary input REG‑K/x230

Article number MTN670802 MTN670804 MTN644492 MTN644592 MTN644892 MTN644792 MTN644992 MTN644692

Number of channels 2 4 4 8 4 8 4 8

Outputs 2 (only for low-current LEDs)

4 (only for low-current LEDs)

— — — — — —

Device width 40x30.5x12.5 mm (LxWxH) 2.5 modules 4 modules 2.5 modules 4 modules 2,5 modules 4 modules

Use casesConnection of conventional push-buttons

or floating contactsConnection of conventional push-buttons

or floating contacts

Connection of conventional devices with AC / DC 24 V outputs, for example,

window contacts, wind sensors, glass break sensors

Connection of conventional devices with AC 230 V outputs

Installation site In the vicinity of push-buttons Cabinet Cabinet Cabinet

Connecting terminal — Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals

Internally generated voltage — —

Input voltage / Contact voltage — / 3.5 V — / 10 V AC/DC 24 V / — AC 230 V / —

Input current / Contact current — / 2 mA — / 2 mA AC 6 mA, DC 15 mA / — AC 12 mA / —

Tresholds — — 0 signal: ≤ 5 V1 signal: ≥11 V

0 signal: ≤ 40 V1 signal: ≥160 V

Maximum line length 7.5 m 50 m 100 m 100 m

Software

Toggle

Switching

Dimming (via one/two inputs)

Blind (via one/two inputs)

Blind with position values

Edges (1 bit, 2 bit, 4 bit, 1 byte, 2 byte)

Edges (1 bit, 2 bit, 4 bit, 1 byte, 2 byte) short and long operation

8 bit slider

Scenes

Pulse counter

Switch counter

Reset counter

Cyclical sending (1 bit, 2 bit, 1 byte)

Locking function for each chanel

Locking function ■ Adjustable for each channel ■ All channels follow the function of a master

channel

19

Push‑button interface plus Binary input REG‑K/x10 Binary input REG‑K/x24 Binary input REG‑K/x230



Outputs 2 (only for low-current LEDs)

4 (only for low-current LEDs)

— — — — — —

Device width 40x30.5x12.5 mm (LxWxH) 2.5 modules 4 modules 2.5 modules 4 modules 2,5 modules 4 modules

Use casesConnection of conventional push-buttons

or floating contactsConnection of conventional push-buttons

or floating contacts

Connection of conventional devices with AC / DC 24 V outputs, for example,

window contacts, wind sensors, glass break sensors

Connection of conventional devices with AC 230 V outputs

Installation site In the vicinity of push-buttons Cabinet Cabinet Cabinet

Connecting terminal — Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals

Internally generated voltage — —

Input voltage / Contact voltage — / 3.5 V — / 10 V AC/DC 24 V / — AC 230 V / —

Input current / Contact current — / 2 mA — / 2 mA AC 6 mA, DC 15 mA / — AC 12 mA / —

Tresholds — — 0 signal: ≤ 5 V1 signal: ≥11 V

0 signal: ≤ 40 V1 signal: ≥160 V

Maximum line length 7.5 m 50 m 100 m 100 m

Software

Toggle

Switching

Dimming (via one/two inputs)

Blind (via one/two inputs)

Blind with position values

Edges (1 bit, 2 bit, 4 bit, 1 byte, 2 byte)

Edges (1 bit, 2 bit, 4 bit, 1 byte, 2 byte) short and long operation

8 bit slider

Scenes

Pulse counter

Switch counter

Reset counter

Cyclical sending (1 bit, 2 bit, 1 byte)

Locking function for each chanel

Locking function ■ Adjustable for each channel ■ All channels follow the function of a master

channel

20


Push‑button interface, 2‑gang plus

MTN670802

Generates an internal signal voltage for connecting two conventional push-buttons or floating contacts, and for connecting two low-current LEDs.The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional 60 mm switch box.n KNX software functions: Switching, dimming or controlling blinds via 1 or 2 inputs, position values for blind control (8-bit), pulse edges with 1-, 2-, 4-, or 8-bit telegrams, differentiation between short and long activation, initialisation telegram, cyclical transmission, pulse edges with 2-byte telegrams, 8-bit linear regulator, scenes, counter, disable function, break contact/make contact, debounce time. Outputs for connecting control lamps (low-current LEDs) for the status display.n For each input/output object type: n Contact voltage: < 3 V (SELV) n Contact current: < 0.5 mA n Output current: max. 2 mA n Max. cable length: 30 cm unshielded, can be extended up to max. 7.5 m with twisted unshielded cable. n Dimensions: approx. 40x30.5x12.5 mm (LxWxH)



Push‑button interface, 4‑gang plus

MTN670804

Generates an internal signal voltage for connecting four conventional push-buttons or floating contacts, and for connecting four low-current LEDs.The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional 60 mm switch box.KNX software functions: Switching, dimming or controlling blinds via 1 or 2 inputs, position values for blind control (8-bit), pulse edges with 1-, 2-, 4-, or 8-bit telegrams, differentiation between short and long activation, initialisation telegram, cyclical transmission, pulse edges with 2-byte telegrams, 8-bit linear regulator, scenes, counter, disable function, break contact/make contact, debounce time. Outputs for connecting control lamps (low-current LEDs) for the status display.n For each input/output object type: n Contact voltage: < 3 V (SELV) n Contact current: < 0.5 mA n Output current: max. 2 mA n Max. cable length: 30 cm unshielded, can be extended up to max. 7.5 m with twisted unshielded cable. n Dimensions: approx. 40x30.5x12.5 mm (LxWxH)


Binary input REG‑K/4x10

MTN644492

For connecting four conventional push-buttons or floating contacts to the KNX. Internally generates a signal voltage SELV, electrically isolated from the bus.With integrated bus coupler and plug-in screw terminals. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.Inputs: 4 n Contact voltage: max. 10 V, clocked n Contact current: max. 2 mA, pulsing n Cable length: max. 50 m n Device width: 2.5 modules = approx. 45 mmn Contents: With bus connecting terminal and cable cover.


KNX

21


Binary input REG‑K/8x10a

MTN644592

For connecting eight conventional push-buttons or floating contacts to the KNX. Internally generates a signal voltage SELV, electrically isolated from the bus.With integrated bus coupler and plug-in screw terminals. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.Inputs: 8 n Contact voltage: max. 10 V, clocked n Contact current: max. 2 mA, pulsing n Cable length: max. 50 m n Device width: 4 modules = approx. 70 mmn Contents: With bus connecting terminal and cable cover.




MTN644892

For connecting four conventional devices with AC/DC 24 V outputs to the KNX.With integrated bus coupler and plug-in screw terminals. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.n Input voltage: AC / DC 24 V n Inputs: 4 n Input current: DC 15 mA (30 V), n AC 6 mA (27 V) n 0 signal: ≤ 5 V n 1 signal: ≥ 11 V n Cable length: max. 100 m n Device width: 2.5 modules = approx. 45 mmn Accessories: Power supply REG, 24 V DC / 0.4 A MTN693003, Power supply REG, 24 V DC / 1.25 A MTN693004, Power supply REG, AC 24 V/1 A MTN663529n Contents: With bus connecting terminal and cable cover.



MTN644792

For connecting 8 conventional devices with AC/DC 24 V outputs to KNX.With integrated bus coupler and plug-in screw terminals. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.n Input voltage: AC/DC 24V n Inputs: 8 n Input current: DC approx. 15 mA/AC approx. 6 mA n Line length: max. 100 m n Device width: 4 modules = approx. 72 mmn Accessories: Power supply REG, 24 V DC / 0.4 A MTN693003, Power supply REG, 24 V DC / 1.25 A n MTN693004, Power supply REG, AC 24 V/1 A MTN663529n Contents: With bus connecting terminal and cable cover.


KNX

22



MTN644992

For connecting four conventional devices with AC 230 V outputs to the KNX.With integrated bus coupler and plug-in screw terminals. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.n Input voltage: AC 230 V, 50-60Hz n Inputs: 4 n Input current: AC 12 mA n 0 signal: ≤ 40 V n 1 signal: ≥ 160 V n Cable length: max. 100 m n Device width: 2.5 modules = approx. 45 mmn Contents: With bus connecting terminal and cable cover.




MTN644692

For connecting eight conventional devices with AC 230 V outputs to the KNX.With integrated bus coupler and plug-in screw terminals. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.n Input voltage: AC 230V, 50-60Hz n Inputs: 8 n Input current: AC approx. 7 mA n Line length: max. 100 m n Device width: 4 modules = approx. 72 mmn Contents: With bus connecting terminal and cable cover.


KNX

23


KNXOverview of presence & movement detectors

KNX ARGUS Presence Basic

KNX ARGUS Presence KNX ARGUS Presence with light control and IR receiver

Article number MTN6307.. MTN6308.. MTN6309..

Use cases (examples)

Offices, waiting rooms

Large offices, waiting rooms, classrooms, private

areas, public buildings

Large offices, waiting rooms, classrooms, private

areas, public buildings

Lighting, heating control

Lighting, blinds, heating control

Lighting, blinds, heating control,

constant light control

Installation site Ceiling mounting, indoor Ceiling mounting, indoor Ceiling mounting, indoor

Protection type IP 20 IP 20 IP 20

Recomended mounting height 2.5 m 2.5 m 2.5 m

Angle of detection 360° 360° 360°

Range (right, left / front) 7 m radius 7 m radius 7 m radius

Number of levels 6 6 6

Number of zones 136 136 136

Number of switching segments 544 544 544

Number of movement sensors 4 4 4

Light sensor 10-2000 Lux 10-2000 Lux 10-2000 Lux

Staircase timer adjustable on the device — — —

Staircase timer adjustable in the ETS 1 s - 255 h 1 s - 255 h 1s - 255 h

Software

Light regulation for a permanent desired brightness — —

Number of movement/presence blocks 2 5 5+1 (1 for light control)

Number of functions per block 4 4 4

Functions per block ■ Output telegrams 1 bit, 1 byte, 2 byte ■ Staircase timer ■ Self‑adjusting staircase timer ■ Sensitivity adjustable ■ Range adjustable ■ Brightness treshold ■ Locking function ■ Sensitivity and range of the movement sensors

sector‑specifically adjustable

—

Brightness value correction —

Cyclical sending of the determined brightness value

Cyclical sending of brightness value via 2 bytes object

Brightness threshold adjustable via object —

Master/Slave function —

Monitoring function (cyclical sending) —

Dead time adjustable (noise reduction) — — —

IR receiver up to 10 channels ■ IR functions with KNX telegrams ■ Configuration of brightness treshold, staircase

timer and range

——

——

24


KNXOverview of presence & movement detectors

KNX ARGUS 180/2,20 m, flush‑mounted

KNX ARGUS 180, flush‑mounted

KNX ARGUS 220

Article number MTN6317.., MTN6327.. MTN6316.., MTN6326.. MTN6325..

Use cases (examples)

Corridors, private areas, public buildings

Corridors, private areas, public areas with limited

access

Entrance areas, patios, garages, large-scale indoor areas where devices with a protection type higher

IP20 are required (working rooms, wellness centres, ...)



Lighting

Installation siteFlush mounting, indoor Flush mounting, indoor

Surface mounting, outdoor, indoor

Protection type IP 20 IP 20 IP 55

Recomended mounting height 2.2 m oder 1.1 m (halved range)

1.10 m 2.5 m

Angle of detection 180° 180° 220°, adjustable lense

Range (right, left / front) 8 m right/left, 12 m to the front

8 m radius14 m right/left, 16 m to the

front

Number of levels 6 1 7

Number of zones 46 14 112

Number of switching segments — — 448

Number of movement sensors 2 1 1

Light sensor 10-2000 Lux 10-2000 Lux 3-2000 Lux

Staircase timer adjustable on the device 1 s - 8 min 1 s - 8 min 1 s - 8 min

Staircase timer adjustable in the ETS 1 s - 255 h 1 s - 255 h 1 s - 255 h

Software

Light regulation for a permanent desired brightness — — —

Number of movement/presence blocks 5 5 5

Number of functions per block 4 4 4

Functions per block ■ Output telegrams 1 bit, 1 byte, 2 byte ■ Staircase timer ■ Self‑adjusting staircase timer ■ Sensitivity adjustable ■ Range adjustable ■ Brightness treshold ■ Locking function ■ Sensitivity and range of the movement sensors

sector‑specifically adjustable

—

—

Brightness value correction —

Cyclical sending of the determined brightness value — — —

Cyclical sending of brightness value via 2 bytes object

Brightness threshold adjustable via object — — —

Master/Slave function

Monitoring function (cyclical sending)

Dead time adjustable (noise reduction)

IR receiver up to 10 channels ■ IR functions with KNX telegrams ■ Configuration of brightness treshold, staircase

timer and range

——

——

——

25

KNXLighting control & automation

KNX ARGUS 220

MTN632519

KNX movement detector for outdoors. 220° surface monitoring for large house fronts and sections of the house. With integrated bus coupler. The physical address is programmed with a magnet. n 360° short-range zone (approx. 4 m radius). n Large wiring compartment and plug system.n Looping is possible.n LED function display for fast alignment at the installation site. n Operating elements are protected under the easily accessible cover plate. n Flexibly adjustable sensor head. n Possible to blank out individual lens areas.Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket.n KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Self-adjusting staircase timer. n Angle of detection: 220° n Range: max. 16 m n Number of levels: 7 n Number of zones: 112 with 448 switching segments n Light sensor: infinitely variable from approx. 3 - 1000 lux, ∞ lux (infinite: movement detection is independent of the position of the sensor head) n Time: can be set externally from 1 s to approx. 8 min. in 6 levels or via ETS from approx. 3 s to approx. 152 hours n Sensitivity: infinitely adjustable n Possible settings for sensor head: n Wall mounting: 9° up, 24° down, 12° left/right, ±12° axial n Ceiling mounting: 4° up, 29° down, 25° left/right, ±8.5° axial n EC directives: Low-voltage guideline 2006/95/EC and EMC directive 2004/108/EC n Type of protection: IP 55n Accessories: Mounting bracket MTN565291, Programming magnet MTN639190n Contents: With cover plate and segments to limit the area of detection, screws and plugs.




KNX ARGUS 180, flush‑mounted

MTN631619

Movement detector for indoors. When a movement is detected, a data telegram defined by the programming is transmitted.With integrated bus coupling unit. n KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Self-adjusting staircase timer. n Angle of detection: 180° n Range: 8 m (for mounting height of 1.1 m) n Number of levels: 1 n Number of zones: 14 n Sensitivity: infinitely adjustable (ETS or potentiometer) n Light sensor: infinitely adjustable from approx. 10 to 2000 Lux (ETS or potentiometer) n Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS) n EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/ECn Contents: With bus connecting terminal and supporting plate.

Part number Description QtyMTN631619 Polar white, glossy 1



26


KNX ARGUS 180/2.20 m flush‑mounted

MTN631719

Indoor movement detector with anti-crawl protection. When a movement is detected, a data telegram defined by the programming is transmitted.With integrated bus coupling unit. For wall mounting in a size 60 mounting box, optimal installation at 2.2 m.n KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Two movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. n Angle of detection: 180° n Range: 8 m right/left, 12 m to the front (for a mounting height of 2.20 m) n Mounting height: 2.2 m or 1.1 m with half the range n Number of levels: 6 n Number of zones: 46 n Number of movement sensors: 2, sector-orientated, adjustable n Sensitivity: infinitely adjustable (ETS or potentiometer) n Light sensor: infinitely adjustable from approx. 10 to 2000 Lux (ETS or potentiometer) n Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS) EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/ECn Contents: With bus connecting terminal and supporting plate. With cover segments to limit the area of detection.


MTN631719 Polar white, glossy 1



KNX ARGUS Presence Basic

MTN630719

Presence detection indoors. If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device constantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.With integrated bus coupling unit. For ceiling mounting in a size 60 mounting box, optimal installation at 2.5 m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence.n KNX software functions: Two movement/presence blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation (no master/slave), safety pause, disable function. Self-adjusting staircase timer. Actual brightness value: can be specified via the internal and/or an external light sensor.n Angle of detection: 360° n Range: a radius of max. 7 m (at a mounting height of 2.50 m) n Number of levels: 6 n Number of zones: 136 with 544 switching segments n Number of movement sensors: 4 n Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNX n EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/ECn Accessories: Surface-mounted housing for ARGUS Presence MTN550619n Contents: With bus connecting terminal and supporting plate.



27


KNX ARGUS Presence

MTN630860

Presence detection indoors. If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device constantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.With integrated bus coupling unit. For ceiling mounting in a size 60 mounting box, optimal installation at 2.5 m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence.n KNX software functions: Five movement/presence blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, monitoring, safety pause, disable function. Four movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction.n Angle of detection: 360° n Range: a radius of max. 7 m (at a mounting height of 2.50 m) n Number of levels: 6 n Number of zones: 136 with 544 switching segments n Number of movement sensors: 4, separately adjustable n Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNX n EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/ECn Accessories: Surface-mounted housing for ARGUS Presence MTN550619n Contents: With bus connecting terminal and supporting plate.




KNX ARGUS Presence with light control and IR receiver

MTN630919

Presence detection indoors. If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device constantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS. Light control enables the required brightness in a room to be achieved permanently. Dimming and the optional use of a second lighting group maintains a constant brightness. Individual ARGUS Presence configurations can be changed or other KNX devices can be controlled remotely using the IR receiver.With integrated bus coupling unit. For ceiling mounting in a size 60 mounting box, optimal installation at 2.5 m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence.n KNX software functions: Five movement/presence blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. An additional light control block: brightness can be maintained constant by dimming and an additional adjustable level. IR receiver function. IR configuration: setting the brightness threshold, staircase timer factors or range. Normal operation, master, slave, monitoring, safety pause, disable function. Four movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction.n Angle of detection: 360° n Range: a radius of max. 7 m (at a mounting height of 2.50 m) n Number of levels: 6 n Number of zones: 136 with 544 switching segments n Number of movement sensors: 4, separately adjustable n Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNX n Number of IR channels: 10 for controlling KNX devices, 10 for configuration n EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/ECn Accessories: Surface-mounted housing for ARGUS Presence MTN550619n Transmitter: IR remote control Distance 2010 MTN570222n Contents: With bus connecting terminal and supporting plate.



28


Surface‑mounted housing for ARGUS Presence

MTN550619

The surface-mounted housing for ARGUS Presence devices also allows them to be surface mounted.To be completed with: ARGUS Presence MTN550590, ARGUS Presence with IR receiver and for extension unit operation MTN550591, KNX ARGUS Presence Basic MTN6307.., KNX ARGUS Presence MTN6308.., KNX ARGUS Presence with light control and IR receiver MTN6309..


KNX ARGUS Presence 180/2.20 m flush‑mounted

MTN630419

Presence detection indoors. If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device constantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.With integrated bus coupling unit. For wall mounting in a size 60 mounting box, optimal installation at 2.2 m. With anti-crawl protection.n KNX software functions: Five movement/presence blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, monitoring, safety pause, disable function. Two movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction.n Angle of detection: 180° n Range: 8 m right/left, 12 m to the front (for a mounting height of 2.20 m) n Mounting height: 2.2 m or 1.1 m at half the range n Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS) n Number of levels: 6 n Number of zones: 46 n Number of movement sensors: 2, separately adjustable n Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNX n EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/ECn Contents: With bus connecting terminal and supporting plate. n With cover segments to limit the area of detection.





KNX brightness and temperature sensor

MTN663991

The sensor records brightness and temperature and transmits these values to the bus. It has a temperature sensor and a brightness sensor. n 3 universal channels for single tasks or logic operations. Temperature and brightness threshold in any combination. n Sun protection channel for blinds/roller shutter control. Objects for: twilight threshold, brightness threshold, drive control, automatic sun function, teaching, security. n Automatic sun protection. Controls the blinds automatically during the day. n Teaching object. With this, every brightness threshold can be reset by the touch of a key.n Suitable for mounting on an outside wall. With integrated bus coupler. The bus is connected using a bus connecting terminal.n Power consumption: max. 150 mW n Sensors: 2 n Temperature measurement range: - 25 °C to + 55 °C (±5 % or ±1 degree) n Brightness measurement range: 1 to 100,000 lux (±20% or ±5 lux) n Type of protection: IP 54 according to DIN EN 60529 for vertical installation with cover n Dimensions: 110 x 72 x 54 mm


KNX

29

Temperature sensor

MTN663596

The temperature is measured with the temperature sensor and converted into an analogue output signal of 0-10 V.For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sensor.n Measuring range: -30° C to +70° C linear n Output: 0 ... 10 V short-circuit-proof External power supply: n Voltage: 24 V DC (15-30 V DC) n Power consumption: approx. 3mA General specifications: n Incoming cable: using PG7 screw fitting n Recommended cable: 3 x 0.25 mm2 n Type of protection: IP 65 n Dimensions: 58 x 35 x 64 (W x H x D)In KNX, to be completed with: Weather station REG-K/4-gang MTN682991, Analogue input REG-K 4-gang MTN682191, Analogue input module REG/4-gang MTN682192Part number Description QtyMTN663596 Light grey 1


KNX CO2, humidity and temperature sensor AP

MTN60050001

The device is a combined sensor for CO2, temperature and humidity measurement (relative humidity). It is used to monitor the air quality in meeting rooms, offices, schools/kindergartens , passive or low-energy houses and living areas without controlled ventilation.The CO2 content of the air is a verifiable indicator of the ambient air quality. The higher the CO2 content, the worse the ambient air is.n KNX software functions: Threshold adjustment range: 500–2550 ppm. Object “”Physical value”: 0-9999 ppm. There are 3 independent measured value thresholds for CO2 and relative humidity and a threshold for the temperature value. An action is carried out if the thresholds are not reached or if they are exceeded: Send priority. Switching, value. Each threshold has a locking object.n Power supply: bus voltage n Current consumption from bus: max. 10 mA n Ambient temperature: -5 °C ... +45 °C n Measuring range, CO2: 300 – 9999 ppm n Measuring range, temperature: 0 °C ... +40 °C n Measuring range, humidity: linear 20 % ... 100 % n Type of protection: IP 20 in accordance with DIN EN 60529 n Dimensions: 74x74x31 mmPart number Description QtyMTN60050001 1

KNX Basic weather station

MTN663990

The KNX Basic weather station records weather data, analyses these and can transmit them to the bus. The device has a wind sensor, precipitation sensor, temperature sensor and brightness sensor. n Wind, brightness and temperature are each sent as a 2-byte value, rain as 1-byte. Wind can be sent either in m/s or km/h. n 4 universal channels for single tasks or logic operations. Four logic functions per channel are possible. n 3 sun protection channels for external blinds/roller shutter control. For example, this makes sun protection for up to three facades possible. Objects for: twilight threshold, brightness threshold, drive control, automatic sun function, teaching, security. n Automatic sun protection. Controls the blinds automatically during the day. n Teaching object. With this, every brightness threshold can be reset by the touch of a key. n Integrated heating for rain sensor.Suitable for mounting on an outside wall or with optional accessories on a corner or on a mast. With integrated bus coupler. The bus is connected using a bus connecting terminal. An additional AC 230 V power supply is required for the heating unit.n Power supply: AC 230 V n Power consumption: max. 10 mA with bus voltage n Power consumption: 10 W with heating n Sensors: 4 n Measuring range: - 20 °C to + 55 °C n Brightness range: 1 to 100,000 lux n Angle of detection: 150° n Type of protection: IP 44 per EN 60529 n Dimensions: 280 x 160 x 135 mmn Accessories: Mast and corner fastening for KNX Basic weather station MTN663992Part number Description QtyMTN663990 Polar white 1

KNX

30


Weather station REG‑K/4‑gang

MTN682991

The weather station records and processes analogue sensor signals such as wind speed, brightness, twilight, precipitation and a DCF-77 signal. Up to four analogue sensors and the DCF-77 weather combi-sensor can be connected in any combination. In connection with the 4-gang analogue input module, 8 analogue inputs are available, to which the connection is made using the sub-bus.If DCF-77 weather combi-sensors are used, it is possible to a ccess a pre-configured setting in the software. The measured values are converted by the weather station into 1 byte / 2 byte telegrams (EIS 6/5 value). This enables bus devices (visualisation software, measured value displays) to access the control processes, generate signals or control weather-dependent processes. Programming is performed using the ETS tool for the weather station. n Two limit values per sensor (not for rain) n Connection of multiple wind sensors n 14 signals can be evaluated n Evaluation of DCF-77 time signal (date and time)n Astro function n Logic operation controller for application of limit-value-dependent actions (even external) n Shading of individual façade segments n Signal monitoring of the combi-sensors with object for the following protective measures n Checking the wind signal for conclusiveness with object for the following protective measures n Selective façade shading (for 4 façades) with adjustment of the basic brightness, façade alignment, angle of opening relative to the sun. n External objects for intervention in basic brightness, angle of opening and limit values n Alarm byte n Continuity monitoring with report on the busFor installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n Auxiliary voltage: AC 24 V (+/-10 %) n Analogue inputs: 4 n Current interface: 0 ... 20 mA, 4 ... 20 mA n Voltage interface: 0 ... 1 V, 0 ... 10 V n Outputs: DC 24 V, 100 mA n Device width: 4 modules = approx. 72 mmn In KNX, to be completed with: Power supply REG, AC 24 V/1 A MTN663529n Accessories: Analogue input module REG/4-gang MTN682192, Weather combi-sensor DCF-77 MTN663692, Wind sensor with 0-10 V interface MTN663591, Wind sensor with 0-10 V interface and heating MTN663592, Rain sensor MTN663595, Brightness sensor MTN663593, Twilight sensor MTN663594, Temperature sensor MTN663596n Contents: With bus connecting terminal and cable cover.


KNX

KNX CO2, humidity and temperature sensor APMast and corner fastening for KNX Basic weather station

MTN663992

To be completed with: KNX Basic weather station MTN663990

Part number Description QtyMTN663992 1

31


KNX

Wind sensor with 0‑10 V interface

MTN682991

The wind sensor evaluates the wind speed and converts it into an analogue 0-10 V output voltage.For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sensor.n Measuring range: 0.7 ... 40 m/s, linear n Output: 0 ... 10 V n External power supply: n Voltage: 24 V DC (18-32 V DC) n Power consumption: approx. 12 mA n General specifications: n Type of protection: IP 65 n Load: max. 60 m/s transient n Incoming cable: 3 m, LiYY 6 x 0.25 mm2 n Fixing method: Mounting bracket n Mounting position: verticaln In KNX, to be completed with: Weather station REG-K/4-gang MTN682991, Analogue input REG-K 4-gang MTN682191, Analogue input module REG/4-gang MTN682192n Contents: With mounting bracket.


Wind sensor with 0‑10 V interface and heating

MTN663592

The wind sensor evaluates the wind speed and converts it into an analogue 0-10 V output voltage. The integrated heater can be operated via an external power supply of AC 24 V/500 mA for trouble-free operation in frosty weather.For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sensor.n Measuring range: 0.7 ... 40 m/s, linear n Output: 0 ... 10 V n External power supply: n Voltage: 24 V DC (18-32 V DC) n Power consumption: approx. 12 mA n Heating: 24 V DC/AC PTC element (80° C) n General specifications: n Type of protection: IP 65 n Load: max. 60 m/s transient n Incoming cable: 3 m, LiYY 6 x 0.25 mm2 n Fixing method: Mounting bracket n Mounting position: verticaln In KNX, to be completed with: Weather station REG-K/4-gang MTN682991, Analogue input REG-K 4-gang MTN682191, Analogue input module REG/4-gang MTN682192n Accessories: Power supply REG, AC 24 V/1 A MTN663529n Contents: With mounting bracket.



Weather combi‑sensor DCF‑77

MTN663692

The weather combi-sensor includes a wind sensor, precipitation sensor, twilight sensor and three brightness sensors (East, South, West). With integral DCF77 receiver, antenna rotatable through 45° and integrated heater (protection against thawing and condensation). Suitable for external installation on a wall or a pole. The sensor is connected to an REG-K 4-gang weather station. The weather data is evaluated in the weather station. The necessary power supplies are provided by the weather station with connected power supply REG.n Power supply: AC 24 V (+/- 15 %) n Power consumption: max. 600 mA (with heating) n Sensors: 6 n Wind speed: 1 ... 40 m/s (≤ 0.5 m/s) n Brightness: 0 ... 110 klux (+/- 10 %) n Twilight 0 ... 250 lux n Type of protection: IP 65 when installed n Temperature range: - 40 °C ... + 60 °C (non-icing) n Fixing method: Mounting bracket n Dimensions: 130x200 mm (ØxH)n In KNX, to be completed with: Weather station REG-K/4-gang MTN682991


MTN663692 Black 1

32


Rain sensor

MTN663595

The rain sensor is used to record and evaluate precipitation and is intended for external mounting. A sensor evaluates the conductivity of the rainwater. The heating is controlled by a microprocessor which supplies an output signal of 0 V or 10 V. The end of the rainfall can be recorded almost immediately with the help of an in-built heater. The heater requires an additional voltage of 24 V AC or DC.For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sensor.n Output: 0 V dry, 10 V rain n External power supply: n Voltage: 24 V DC (15-30 V DC) n Power consumption: approx. 10 mA (without heating) n Heating: 24 V DC/AC max. 4.5 W n General specifications: n Type of protection: IP 65 n Incoming cable: 3 m, UYY 5 x 0.25 mm2 n Fixing method: Mounting bracket n Mounting position: approx. 45°n In KNX, to be completed with: Weather station REG-K/4-gang MTN682991, Analogue input REG-K 4-gang MTN682191, Analogue input module REG/4-gang MTN682192n Accessories: Power supply REG, AC 24 V/1 A MTN663529n Contents: With holder for installing the sensor on walls and masts.


Temperature sensor

MTN663596

The temperature is measured with the temperature sensor and converted into an analogue output signal of 0-10 V.For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sensor.n Measuring range: -30° C to +70° C linear n Output: 0 ... 10 V short-circuit-proof n External power supply: n Voltage: 24 V DC (15-30 V DC) n Power consumption: approx. 3 mA n General specifications: n Incoming cable: using PG7 screw fitting n Recommended cable: 3 x 0.25 mm2 n Type of protection: IP 65 n Dimensions: 58 x 35 x 64 (W x H x D)n In KNX, to be completed with: Weather station REG-K/4-gang MTN682991, Analogue input REG-K 4-gang MTN682191, Analogue input module REG/4-gang MTN682192



Brightness sensor

MTN663593

The brightness sensor is required for recording and evaluating brightness. Brightness is recorded via a photoelectric diode and electronically converted into an analogue output signal of 0 V - 10 V.For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sensor.n Measuring range: 0 to 60,000 lux, linear n Output: 0 ... 10 V short-circuit-proof n External power supply: n Voltage: 24 V DC (15-30 V DC) n Power consumption: approx. 5 mA n General specifications: n Incoming cable: using PG7 screw fitting n Recommended cable: 3 x 0.25 mm2 n Type of protection: IP 65 n Dimensions: 58 x 35 x 64 (W x H x D)n In KNX, to be completed with: Weather station REG-K/4-gang MTN682991, Analogue input REG-K 4-gang MTN682191, Analogue input module REG/4-gang MTN682192



KNX

Analogue input REG‑K 4‑gang

MTN682191

The analogue input records and processes analogue sensor signals. Up to four analogue sensors can be connected in any combination. In connection with the analogue input module REG/4-gang, 8 analogue inputs are available, to which the connection is made using the sub-bus. Evaluation and limit value processing is performed in the analogue input. With continuity checking of the 4 ... 20 mA inputs. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n Auxiliary voltage: AC 24 V (+/-10 %) n Analogue inputs: 4 n Current interface: 0 ... 20 mA, 4 ... 20 mA n Voltage interface: 0 ... 1 V, 0 ... 10 V n Outputs: DC 24 V, 100 mA n Continuity checking: 4 ... 20 mA n Device width: 4 modules = approx. 72 mmn In KNX, to be completed with: Power supply REG, AC 24 V/1 A MTN663529n Accessories: Analogue input module REG/4-gang MTN682192, Wind sensor with 0-10 V interface MTN663591, Wind sensor with 0-10 V interface and heating MTN663592, Rain sensor MTN663595, Brightness sensor MTN663593, Twilight sensor MTN663594, Temperature sensor MTN663596n Contents: With bus connecting terminal and cable cover.


Analogue input module REG/4‑gang

MTN682192

Extension module to extend weather station REG-K/4-gang and analogue input REG-K/4-gang from 4 to 8 analogue outputs. Connections are made using the sub-bus. Up to four analogue sensors can be connected in any combination.Evaluation and limit value processing is performed in the analogue input or weather station. With continuity checking of the 4 ... 20 mA inputs. For installation on DIN rails TH35 according to EN 60715.n Auxiliary voltage: AC 24 V (+/-10 %) n Rating: max. 4 VA n Analogue inputs: 4 n Current interface: 0 ... 20 mA, 4 ... 20 mA n Voltage interface: 0 ... 1 V, 0 ... 10 V (DC) n A/D conversion: 14 bit n Outputs: DC 24 V, 100 mA n Continuity checking: 4 ... 20 mA n Device width: 4 modules = approx. 72 mmn In KNX, to be completed with: Weather station REG-K/4-gang MTN682991, Analogue input REG-K 4-gang MTN682191, Power supply REG, AC 24 V/1 A MTN663529n Accessories: Wind sensor with 0-10 V interface MTN663591, Wind sensor with 0-10 V interface and heating MTN663592, Rain sensor MTN663595, Brightness sensor MTN663593, Twilight sensor MTN663594, Temperature sensor MTN663596n Contents: With sub-bus jumper.



KNX timer REG‑K

MTN677290

The timer sends time and date to the bus and can be operated with or without a DCF77 antenna. n Automatic changeover between summer and winter time (can be switched off) n Own adjustable changeover rule n The data can be sent periodically or on request n Lithium cell: time stays the same in the event of loss of bus powerFor installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n Accuracy: 1 s/day, the application allows additional adjustment n Reserve power: 10 years n Antenna line length: max. 100 m n Type of protection: IP 20 n EC directives: Low-voltage guideline 2006/95/EC and EMC directive 2004/108/EC n Device width: 2 modules = approx. 36 mmn Accessories: DCF77 antenna MTN668091



33


KNX

34


KNXFunctions overview switch actuators

Blind/switch actuator REG‑K/ x/x/10

with manual mode

Switch actuator REG‑K/8x230/6

Switch actuator REG‑K/x230/10 with manual mode


Switch actuator REG‑K/x230/16 with manual mode and current detection

Article number MTN649908MTN649912 MTN646808 MTN649202 MTN649204 MTN649208 MTN649212 MTN647393 MTN647593 MTN647893 MTN648493 MTN647395 MTN647595 MTN647895 MTN648495

Number of switch contacts 16 24 8 2 4 8 12 2 4 8 12 2 4 8 12Device width

8 TE 12 TE 4 modules2.5

modules4 modules 4 modules 6 modules 2.5 modules 4 modules 8 modules 12 modules 2.5 modules 4 modules 8 modules 12 modules

Manual mode ■ Mechanical ■ Electrical ■ Reset by manual mode triggered actions

— (lockable)

—

———

— (lockable)

———

—

Connecting terminal (consumer load) Plug-in screw terminalsPlug-in screw

terminalsPlug-in screw terminals Screw terminals Screw terminals

Nominal voltage, AC, 50‑60 Hz AC 100-240 V AC 230 V AC 230 V AC 100-240 V AC 230 V AC 100-240 V AC 230 V AC 100-240 V AC 230 V AC 100-240 V AC 100-240 VNominal current 10 A, cosϕ = 0,6 6 A, cosϕ = 0.6 10 A, cosϕ = 1 / 10 A, cosϕ = 0.6 16 A, cosϕ = 0.6 16 A, cosϕ = 0.6Connection power max. at AC 230 V ■ Incandescent lamps ■ Halogen lamps ■ Capacitive load ■ Fluorescent lamps

2000 W1700 W105 µF1800 W

uncompensated,1000 W parallel-

compensated

1380 W1380 W105 µF

1000 VA

2000 W1700 W105 µF

1800 W uncompensated, 1000 W parallel-compensated

3600 W2500 W200 µF

2500 VA

3600 W2500 W200 µF

2500 VA

DC power supply not allowed not allowed not allowed not allowed Purely resistive loads allowed, DC 12-24 V, +10 %, 0,1 - 16 ASoftwareON/OFF delayStaircase lighting function with/without manual OFF ■ Retriggerable ■ Fix (for all push‑buttons the same time) ■ Variable (for all push‑buttons different

times) ■ Retriggerable and adding ■ Retrigger to the higher time ■ Prewarn

————

————

————

————

Flashing — —Make/Break contact adjustableChangeover contact adjustable — — —Status/Status feedback ■ Active ■ Passive ■ Manual mode: Identify and acknowledge /

Reset ■ Delayed per device / Delayed per channel

/ —— /

— / —— / —

/ —— / —

— / —— / —

/ /

Behaviour of bus voltage failure / bus voltage recovery

/ / / / /

Scenes ■ Sending delay

5—

8—

5—

8—

8

Higher priority functions Disable function Logic function or priority function

Disable function Logic function or priority function



Logic function Disable function or priority function

Disable function ■ Behaviour of locking after bus voltage

recoveryLogic function ■ Logic operation ■ Value comparison / logic / gate function /

filter / time delay— / — / — / — / — — / — / — / — / — — / — / — / — / — — / — / — / — / — / / / /

Central function ■ Time delay / Save changes — / — — / — — / — — / — /

Safety function — — — —Line monitoring (sending live signal) — — — —

35


with manual mode






Number of switch contacts 16 24 8 2 4 8 12 2 4 8 12 2 4 8 12Device width

8 TE 12 TE 4 modules2.5

modules4 modules 4 modules 6 modules 2.5 modules 4 modules 8 modules 12 modules 2.5 modules 4 modules 8 modules 12 modules

Manual mode ■ Mechanical ■ Electrical ■ Reset by manual mode triggered actions

— (lockable)

—

———

— (lockable)

———

—

Connecting terminal (consumer load) Plug-in screw terminalsPlug-in screw

terminalsPlug-in screw terminals Screw terminals Screw terminals

Nominal voltage, AC, 50‑60 Hz AC 100-240 V AC 230 V AC 230 V AC 100-240 V AC 230 V AC 100-240 V AC 230 V AC 100-240 V AC 230 V AC 100-240 V AC 100-240 VNominal current 10 A, cosϕ = 0,6 6 A, cosϕ = 0.6 10 A, cosϕ = 1 / 10 A, cosϕ = 0.6 16 A, cosϕ = 0.6 16 A, cosϕ = 0.6Connection power max. at AC 230 V ■ Incandescent lamps ■ Halogen lamps ■ Capacitive load ■ Fluorescent lamps

2000 W1700 W105 µF1800 W

uncompensated,1000 W parallel-

compensated

1380 W1380 W105 µF

1000 VA

2000 W1700 W105 µF

1800 W uncompensated, 1000 W parallel-compensated

3600 W2500 W200 µF

2500 VA

3600 W2500 W200 µF

2500 VA

DC power supply not allowed not allowed not allowed not allowed Purely resistive loads allowed, DC 12-24 V, +10 %, 0,1 - 16 ASoftwareON/OFF delayStaircase lighting function with/without manual OFF ■ Retriggerable ■ Fix (for all push‑buttons the same time) ■ Variable (for all push‑buttons different

times) ■ Retriggerable and adding ■ Retrigger to the higher time ■ Prewarn

————

————

————

————

Flashing — —Make/Break contact adjustableChangeover contact adjustable — — —Status/Status feedback ■ Active ■ Passive ■ Manual mode: Identify and acknowledge /

Reset ■ Delayed per device / Delayed per channel

/ —— /

— / —— / —

/ —— / —

— / —— / —

/ /

Behaviour of bus voltage failure / bus voltage recovery

/ / / / /

Scenes ■ Sending delay

5—

8—

5—

8—

8

Higher priority functions Disable function Logic function or priority function




Logic function Disable function or priority function

Disable function ■ Behaviour of locking after bus voltage

recoveryLogic function ■ Logic operation ■ Value comparison / logic / gate function /

filter / time delay— / — / — / — / — — / — / — / — / — — / — / — / — / — — / — / — / — / — / / / /

Central function ■ Time delay / Save changes — / — — / — — / — — / — /

Safety function — — — —Line monitoring (sending live signal) — — — —

36


with manual mode






Current detection ■ AC/DC ■ Display energy consumption* ■ Several limit monitorings ■ Switch counter ■ Hours counter ■ Combined counter (Switch and hour

counter with limit monitoring)

——————

——————

——————

——————

Heating function ■ Switching ON/OFF (2‑point valve) ■ Continuous (PWM) ■ Cyclic surveillance of control value ■ Locking in summer/winter mode ■ Collected response „All valves closed“ ■ Current detection ■ Valve protection cyclical / with telegram ■ Valve protection feedback / status ■ Behaviour when bus voltage fails / when

bus voltage returns

——————

— / —— / —— / —

——————

— / —— / —— / —

——————

— / —— / —— / —

——————

— / —— / —— / —

/ / /


KNXFunctions overview switch actuators

37


with manual mode






Current detection ■ AC/DC ■ Display energy consumption* ■ Several limit monitorings ■ Switch counter ■ Hours counter ■ Combined counter (Switch and hour

counter with limit monitoring)

——————

——————

——————

——————

Heating function ■ Switching ON/OFF (2‑point valve) ■ Continuous (PWM) ■ Cyclic surveillance of control value ■ Locking in summer/winter mode ■ Collected response „All valves closed“ ■ Current detection ■ Valve protection cyclical / with telegram ■ Valve protection feedback / status ■ Behaviour when bus voltage fails / when

bus voltage returns

——————

— / —— / —— / —

——————

— / —— / —— / —

——————

— / —— / —— / —

——————

— / —— / —— / —

/ / /

38

Switch actuator, flush‑mounted/230/16

MTN629993

For switching a load via a make contact. With integrated bus coupler and screw terminals. The device is connected to the bus with a bus connecting terminal. The actuator can be built into a 47 mm ceiling socket with hook or a flush-mounted switch box.n KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour.n Nominal voltage: AC 100-240 V ±10% n Operating voltage: min. AC 90 V - max. AC 265 V n Mains frequency: 50-60 Hz ±10% n Nominal current: 16 A, ohmic load cosϕ = 1 10 A, inductive load cosϕ = 0,6 Nominal load n Incandescent lamps: AC 100 V, max. 1173 W AC 230 V, max. 2700 W AC 240 V, max. 2817 W n Halogen lamps: AC 100 V, max. 739 W AC 230 V, max. 1700 W AC 240 V, max. 1773 W n Fluorescent lamps: AC 100 V, max. 434 VA AC 230 V, max. 1000 VA AC 240 V, max. 1043 VA parallel-compensated n Capacitive load: AC 230 V, 10 A, max. 105 µF n Dimensions: 51x52x29 mm (WxHxD)n Contents: With bus connecting terminal.


KNX switch actuator 16 A FM with 2 inputs

MTN60030001

1-gang switch actuator with two inputs for installation in a size 60 switch box or ceiling socket-outlet with hook. Floating contacts can be connected to the two inputs. The first input is assigned to the actuator at the factory, enabling operation without programming. Connection to 230 V via a flexible cable, approx. 20 cm long. The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable. The connecting cable for the inputs can be extended to a max. of 5 m.n KNX software functions: Switch actuator functions: Operation as break contact or make contact. Selection of default position on bus voltage failure/recovery. Switch on and/or off delay. Time switch function. Switching. Status feedback. Logic operation. Disable function or priority control. Status feedback object can be inverted. n Input function: Free assignment of the switching, dimming, blind and valuator functions. Locking object. Behaviour when bus voltage recovers. Switching: two switch objects per input. Command on rising/falling edge (ON, OFF, TOGGLE, no reaction). Dimming: Single surface and dual-surface operation. Time between dimming and switching and dim step values. Telegram repetition and send stop telegram. Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), Operation concept (Step - Move - Step or Move - Step). Time between short and long operation. Slat adjustment time. Valuator and lightscene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge. Value adjustment via long push-button action for valuator. Lightscene ext. unit with memory function.n Nominal voltage: AC 230 V n Nominal current: 16 A, ohmic load n Switch contact: Make contact, floating relay contact n Nominal output n Incandescent lamps: AC 230 V, max. 2500 W n Halogen lamps: AC 230 V, max. 2200 W n LV halogen lamps: max. 1000 VA, wound transformer max. 1000 W, electronic transformers n Capacitive load: AC 230 V, 10 A, max. 105 µF n Inputs: 2 n Temperature range: -5 °C to 45 °C n Type of protection: IP 20 n Dimensions: 53x53x28 (WxHxD)Note: For installation in a double box or an electronic box (Kaiser). There must be a minimum gap of 4mm between the 230V connection and the connection for the KNX/Inputs (SELV)


MTN60030001 1


KNX

39

2‑gang KNX switch actuator 6 A FM with 2 inputs

MTN60030002

2-gang switch actuator with two inputs for installation in a size 60 switch box. Floating contacts can be connected to the two inputs. The inputs have already been assigned to the corresponding actuators at the factory, enabling operation without programming.Connection to 230 V via a flexible cable, approx. 20 cm long. The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable. The connecting cable for the inputs can be extended to a max. of 5 m.n KNX software functions: Switch actuator functions: Operation as break contact or make contact. Selection of default position on bus voltage failure/recovery. Switch on and/or off delay. Time switch function. Switching. Status feedback. Logic operation. Disable function or priority control. Status feedback object can be inverted. n Input function: Free assignment of the switching, dimming, blind and valuator functions. Locking object. Behaviour when bus voltage recovers. Switching: two switch objects per input. Command on rising/falling edge (ON, OFF, TOGGLE, no reaction). Dimming: Single surface and dual-surface operation. Time between dimming and switching and dim step values. Telegram repetition and send stop telegram. Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), Operation concept (Step - Move - Step or Move - Step). Time between short and long operation. Slat adjustment time. Valuator and Scene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge. Value adjustment via long push-button action for valuator. Scene ext. unit with memory function.n Nominal voltage: AC 230 V n Nominal current: 6 A, ohmic load n Switch contacts: 2x make contacts n Nominal output n Incandescent lamps: AC 230 V, max. 1200 W n Halogen lamps: AC 230 V, max. 1200 W n LV halogen lamps: max. 500 VA, wound transformer max. 500 W, electronic transformers n Capacitive load: AC 230 V, 6 A, max. 14 µF n Inputs: 2 n Temperature range: -5 °C to 45 °C n Type of protection: IP 20 n Dimensions: 53x53x28 (WxHxD)Note: For installation in a double box or an electronic box (Kaiser). There must be a minimum gap of 4mm between the 230V connection and the connection for the KNX/Inputs (SELV)


Switch actuator REG‑K/2x230/10 with manual mode

MTN649202

For independent switching of up to 2 loads via make contacts. The function of the switching channels is freely configurable. All switching outlets can be operated manually using push-button operation.Channel status display via LEDs. A green LED indicates readiness for operation.With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel.n Power supply: Nominal voltage: AC 230 V, 50-60 Hz n For each switch output: n Nominal current: 10 A, cosϕ = 1; 10 A, cosϕ = 0.6 n Incandescent lamps: AC 230 V, max. 2000 W n Halogen lamps: AC 230 V, max. 1700 W n Fluorescent lamps: AC 230 V, max. 1800 W, uncompensated AC 230 V, max. 1000 W with parallel compensation n Capacitive load: AC 230 V, max. 105 µF n Device width: 2.5 modules = approx. 45 mmn Contents: With bus connecting terminal and cable cover.




KNX

40


MTN647393

For independent switching of two loads via make contacts. With integrated bus coupler and screw terminals. The 230 V switch output can be operated with a manual switch.A green LED indicates readiness for operation after the application has been loaded.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour.n Nominal voltage: AC 100-240 V ±10% n Operating voltage: min. AC 90 V - max. AC 265 V n Mains frequency: 50-60 Hz ±10% n For each switching contact: n Nominal current: 16 A, inductive load cosϕ = 0,6 Nominal load n Incandescent lamps: AC 100 V, max. 1600 W AC 230 V, max. 3600 W AC 240 V, max. 3840 W n Halogen lamps: AC 100 V, max. 1086 W AC 230 V, max. 2500 W AC 240 V, max. 2608 W n Fluorescent lamps: AC 100 V, max. 1086 VA AC 230 V, max. 2500 VA AC 240 V, max. 2608 VA parallel-compensated n Capacitive load: AC 230 V, 16 A, max. 200 µF n Device width: 2.5 modules = approx. 45 mmn Contents: With bus connecting terminal and cable cover.



KNX

41

Switch actuator REG‑K/2x230/16 with manual mode and current detection

MTN647395

For independent switching of two loads via make contacts. The actuator has integrated current detection that measures the load current on each channel. All 230 V switch outputs can be operated with manual switches. With integrated bus coupling unit.A green LED indicates that the device is ready for operation once the application has been loaded. The load is connected with screw terminals.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Operation as break contact or make contact. Staircase lighting function with/without manual OFF function and switch-off warning. Delay functions. Scenes. Logic function. Blocking or priority control. Feedback function. Status. Central function with delay. Parameterisation for bus voltage failure and recovery. Behaviour for download. Current detection function: Behaviour when value exceeds/falls short of the threshold value. Energy, operating and switch on counter with limit value monitoring. Flash function.For alternating current (AC) per channel: n Nominal voltage: AC 100-240 V ±10% n Operating voltage: min. AC 90 V - max. AC 265 V n Mains frequency: 50-60 Hz ±10% n Nominal current: 16 A, inductive load cosϕ = 0,6 n Nominal load n Incandescent lamps: AC 100 V, max. 1600 W AC 230 V, max. 3600 W AC 240 V, max. 3840 W n Halogen lamps: AC 100 V, max. 1086 W AC 230 V, max. 2500 W AC 240 V, max. 2608 W n Fluorescent lamps: AC 100 V, max. 1086 VA AC 230 V, max. 2500 VA AC 240 V, max. 2608 VA parallel-compensated n Capacitive load: AC 230 V, 16 A, max. 200 µF n Motor load: AC 100 V, max. 434 W AC 230 V, max. 1000 W AC 240 V, max. 1043 W For direct current (DC) per channel: n Nominal voltage: DC 12-24 V, 0.1-16 A n Nominal current: 16 A n Current detection (load current): n Detection range: 0.1 A to 16 A (sine effective value or DC) n Sensing accuracy: +/- 8% of the current value at hand (sine) and +/- 100 mA n Frequency: 50/60 Hz, for alternating current (AC) n Description: 100 mA n Device width: 2.5 modules = approx. 45 mmn Contents: With bus connecting terminal and cable cover.Part number Description QtyMTN647395 Light grey 1


MTN649204

For independent switching of up to 4 loads via make contacts. The function of the switching channels is freely configurable. All switching outlets can be operated manually using push-button operation. Channel status display via LEDs. A green LED indicates readiness for operation. With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel.Power supply: n Nominal voltage: AC 230 V, 50-60 Hz For each switch output: n Nominal current: 10 A, cosϕ = 1; 10 A, cosϕ = 0.6 n Incandescent lamps: AC 230 V, max. 2000 W n Halogen lamps: AC 230 V, max. 1700 W n Fluorescent lamps: AC 230 V, max. 1800 W, uncompensated AC 230 V, max. 1000 W with parallel compensation n Capacitive load: AC 230 V, max. 105 µF n Device width: 4 modules = approx. 72 mmn Contents: With bus connecting terminal and cable cover.Part number Description QtyMTN649204 Light grey 1


KNX

42


MTN647593

For independent switching of four loads via make contacts. With integrated bus coupler 2 and screw terminals. The 230 V switch output can be operated with a manual switch.A green LED indicates readiness for operation after the application has been loaded.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour.n Nominal voltage: AC 230 V, 50-60 Hz For each switching contact: n Nominal current: 16 A, cosϕ = 0,6 n Incandescent lamps: AC 230 V, max. 3600 W n Halogen lamps: AC 230 V, max. 2500 W n Fluorescent lamps: AC 230 V, max. 2500 VA n Capacitive load: AC 230 V, 16 A, max. 200 µF n Device width: 4 modules = approx. 72 mmn Contents: With bus connecting terminal and cable cover.




MTN647595

For independent switching of four loads via make contacts. The actuator has integrated current detection that measures the load current on each channel. All 230 V switch outputs can be operated with manual switches. With integrated bus coupling unit.A green LED indicates that the device is ready for operation once the application has been loaded. The load is connected with screw terminals.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Operation as break contact or make contact. Staircase lighting function with/without manual OFF function and switch-off warning. Delay functions. Scenes. Logic function. Blocking or priority control. Feedback function. Status. Central function with delay. Parameterisation for bus voltage failure and recovery. Behaviour for download. Current detection function: Behaviour when value exceeds/falls short of the threshold value. Energy, operating and switch on counter with limit value monitoring. Flash function.n Nominal voltage: AC 230 V, 50 - 60 Hz Per switching contact: n Nominal current: 16 A, cosϕ = 0.6 n Incandescent lamps: AC 230 V, max. 3600 W n Halogen lamps: AC 230 V, max. 2500 W n Fluorescent lamps: AC 230 V, max. 2500 VA, with parallel compensation n Capacitive load: AC 230 V, 16 A, max. 200 µF n Motor load: AC 230 V, max. 1000 W Current detection load current: n Detection range: 0.1 A to 16 A (sine effective value or DC) n Sensing accuracy: +/- 8% of the current value at hand (sine) and +/- 100 mA n Frequency: 50/60 Hz n Description: 100 mA n Device width: 4 modules = approx. 72 mmn Contents: With bus connecting terminal and cable cover.



KNX

43


MTN646808

For independent switching of eight loads via make contacts. With integrated bus coupler and plug-in screw terminals.A green LED indicates readiness for operation after the application has been loaded.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour.n Nominal voltage: AC 230 V, 50-60 Hz For each switching contact: n Nominal current: 6 A, cosϕ = 0.6 n Incandescent lamps: AC 230 V, max. 1380 W n Halogen lamps: AC 230 V, max. 1380 W n Fluorescent lamps: AC 230 V, max. 1000 VA n Capacitive load: AC 230 V, 6 A, max. 105 µF n Device width: 4 modules = approx. 72 mmn Contents: With bus connecting terminal and cable cover.




MTN649208

For independent switching of up to 8 loads via make contacts. The function of the switching channels is freely configurable. All switching outlets can be operated manually using push-button operation.Channel status display via LEDs. A green LED indicates readiness for operation.With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel.Power supply: n Nominal voltage: AC 230 V, 50-60 Hz For each switch output: n Nominal current: 10 A, cosϕ = 1; 10 A, cosϕ = 0.6 n Incandescent lamps: AC 230 V, max. 2000 W n Halogen lamps: AC 230 V, max. 1700 W n Fluorescent lamps: AC 230 V, max. 1800 W, uncompensated n AC 230 V, max. 1000 W with parallel compensation n Capacitive load: AC 230 V, max. 105 µF n Device width: 4 modules = approx. 72 mmn Contents: With bus connecting terminal and cable cover.



KNX

44


MTN647893

For independent switching of 8 loads via make contacts. All 230 V switch outputs can be operated with manual switches. With integrated bus coupler.The device is connected to the mains via screw terminals; every second L connection is bridged internally. A green LED indicates readiness for operation after the application has been loaded.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour.n Nominal voltage: AC 100-240 V ±10% n Operating voltage: min. AC 90 V - max. AC 265 V n Mains frequency: 50-60 Hz ±10% For each switching contact: n Nominal current: 16 A, inductive load cosϕ = 0,6 Nominal load n Incandescent lamps: AC 100 V, max. 1600 W AC 230 V, max. 3600 W AC 240 V, max. 3840 W n Halogen lamps: AC 100 V, max. 1086 W AC 230 V, max. 2500 W AC 240 V, max. 2608 W n Fluorescent lamps: AC 100 V, max. 1086 VA AC 230 V, max. 2500 VA AC 240 V, max. 2608 VA parallel-compensated n Capacitive load: AC 230 V, 16 A, max. 200 µF n Device width: 8 modules = approx. 144 mmn Contents: With bus connecting terminal and cable cover.




KNX

45


MTN647895

For independently switching 8 loads via make contacts. The actuator has integrated current detection that measures the load current on each channel. All 230 V switch outputs can be operated with manual switches. With integrated bus coupling unit.A green LED indicates that the device is ready for operation once the application has been loaded. The load is connected with screw terminals.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Operation as break contact or make contact. Staircase lighting function with/without manual OFF function and switch-off warning. Delay functions. Scenes. Logic function. Blocking or priority control. Feedback function. Status. Central function with delay. Parameterisation for bus voltage failure and recovery. Behaviour for download. Current detection function: Behaviour when value exceeds/falls short of the threshold value. Energy, operating and switch on counter with limit value monitoring. Flash function.For alternating current (AC) per channel: n Nominal voltage: AC 100-240 V ±10% n Operating voltage: min. AC 90 V - max. AC 265 V n Mains frequency: 50-60 Hz ±10% n Nominal current: 16 A, inductive load cosϕ = 0,6 Nominal load n Incandescent lamps: AC 100 V, max. 1600 W AC 230 V, max. 3600 W AC 240 V, max. 3840 W n Halogen lamps: AC 100 V, max. 1086 W AC 230 V, max. 2500 W AC 240 V, max. 2608 W n Fluorescent lamps: AC 100 V, max. 1086 VA AC 230 V, max. 2500 VA AC 240 V, max. 2608 VA parallel-compensated n Capacitive load: AC 230 V, 16 A, max. 200 µF n Motor load: AC 100 V, max. 434 W AC 230 V, max. 1000 W AC 240 V, max. 1043 W For direct current (DC) per channel: n Nominal voltage: DC 12-24 V, 0.1-16 A n Nominal current: 16 A n Current detection (load current): n Detection range: 0.1 A to 16 A (sine effective value or DC) n Sensing accuracy: +/- 8% of the current value at hand (sine) and +/- 100 mA n Frequency: 50/60 Hz, for alternating current (AC) n Description: 100 mA n Device width: 8 modules = approx. 144 mmn Contents: With bus connecting terminal and cable cover.



KNX

46


MTN649212

For independent switching of up to 12 loads via make contacts. The function of the switching channels is freely configurable. All switching outlets can be operated manually using push-button operation.Channel status display via LEDs. A green LED indicates readiness for operation.With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel.Power supply: n Nominal voltage: AC 230 V, 50 - 60 Hz n External auxiliary voltage (optional): AC 110 - 240 V, 50 - 60 Hz, max. 2 VA For each switch output: n Nominal current: 10 A, cosϕ = 1; 10 A, cosϕ = 0.6 n Incandescent lamps: AC 230 V, max. 2000 W n Halogen lamps: AC 230 V, max. 1700 W n Fluorescent lamps: AC 230 V, max. 1800 W, uncompensated AC 230 V, max. 1000 W parallel-compensated n Capacitive load: AC 230 V, max. 105 µF n Device width: 6 modules = approx. 108 mmn Contents: With bus connecting terminal and cable cover.



MTN648493

For independent switching of 12 loads via make contacts. All 230 V switch outputs can be operated with manual switches. With integrated bus coupler.The device is connected to the mains via screw terminals; every second L connection is bridged internally. A green LED indicates readiness for operation after the application has been loaded.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour.n Nominal voltage: AC 230 V, 50-60 Hz Per switch contact: n Nominal current: 16 A, cosϕ =0.6 n Incandescent lamps: AC 230 V, max. 3600 W n Halogen lamps: AC 230 V, max. 2500 W n Fluorescent lamps: AC 230 V, max. 2500 VA n Capacitive load: AC 230 V, 16 A, max. 200 µF n Device width: 12 modules = approx. 216 mmn Contents: With bus connecting terminal and cable cover.




KNX

47


MTN648495

For independently switching 12 loads via make contacts. The actuator has integrated current detection that measures the load current on each channel. All 230 V switch outputs can be operated with manual switches. With integrated bus coupling unit.A green LED indicates that the device is ready for operation once the application has been loaded. The load is connected with screw terminals.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Operation as break contact or make contact. Staircase lighting function with/without manual OFF function and switch-off warning. Delay functions. Scenes. Logic function. Blocking or priority control. Feedback function. Status. Central function with delay. Parameterisation for bus voltage failure and recovery. Behaviour for download. Current detection function: Behaviour when value exceeds/falls short of the threshold value. Energy, operating and switch on counter with limit value amonitoring. Flash function.For alternating current (AC) per channel: n Nominal voltage: AC 100-240 V ±10% n Operating voltage: min. AC 90 V - max. AC 265 V n Mains frequency: 50-60 Hz ±10% n Nominal current: 16 A, inductive load cosϕ = 0,6 Nominal load n Incandescent lamps: AC 100 V, max. 1600 W AC 230 V, max. 3600 W AC 240 V, max. 3840 W n Halogen lamps: AC 100 V, max. 1086 W AC 230 V, max. 2500 W AC 240 V, max. 2608 W n Fluorescent lamps: AC 100 V, max. 1086 VA AC 230 V, max. 2500 VA AC 240 V, max. 2608 VA parallel-compensated n Capacitive load: AC 230 V, 16 A, max. 200 µF n Motor load: AC 100 V, max. 434 W AC 230 V, max. 1000 W AC 240 V, max. 1043 W For direct current (DC) per channel: n Nominal voltage: DC 12-24 V, 0.1-16 A n Nominal current: 16 A Current detection (load current): n Detection range: 0.1 A to 16 A (sine effective value or DC) n Sensing accuracy: +/- 8% of the current value at hand (sine) and +/- 100 mA n Frequency: 50/60 Hz, for alternating current (AC) n Description: 100 mA n Device width: 12 modules = approx. 216 mmn Contents: With bus connecting terminal and cable cover.



KNX

48


KNXOverview rail mounted devices blind actuators

Blind actuator REG‑K/4x/6

Blind actuator REG‑K/4x24/6

with manual mode

Roller shutter actuator REG‑K/4x/10

with manual mode

Blind actuator REG‑K/x/10 with manual mode


with manual mode

Blind/switch actuator REG‑K/x/x/10 with manual mode



Device width 4 modules 4 modules 4 modules 4 modules 8 modules 8 modules 12 modules

Manual mode push‑buttons —

Connecting terminal (consumer load) Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals

Nominal voltage, AC, 50‑60 Hz AC 230 V — AC 100-240 V AC 100-240 V AC 230 V AC 100-240 V

Nominal voltage, DC — DC 24 V, ±10 % — — — —

Nominal current 6 A, cosϕ = 0,6 6 A 10 A, cosϕ = 0,6 10 A, cosϕ = 0,6 10 A, cosϕ = 0,6 10 A, cosϕ = 0,6

Auxiliary power (optional) — — — — AC 110-240 V, 50-60 Hz, max. 2 VA

AC 110-240 V, 50-60 Hz, max. 2 VA

Software

Configuration switching or blind — — — — —

Defining blind type —

Slat functionality —

Calibration (reference movement)

Movement range limit —

Pause on reverse on change in direction

Extended drive parameters

Control by ■ manual mode via the push‑buttons of the actuator ■ automatic objects or preset objects ■ manual operation via objects

——

Manual mode enable/disable when bus voltage fails — — — — (Precondition: auxiliary power)

(Precondition: auxiliary power)

Locking manual operation via objects —

Weather alarm functions ■ Wind alarm ■ Rain alarm ■ Frost alarm ■ Set the order of priority ■ Behaviour at start/end of the wether alarm

311

311

311

311

311

11—

Alarm functions ■ Behavior at the start/end of the alarm

—

Set the order of priority for higher‑level functions(alarm, weather alarm, locking, movement range)

—

Scenes 4 5 5 5 5 5

Disable function ■ Behavior at the start/end of the locking

—

Behaviour of bus voltage failure / bus voltage recovery / download / / / / / / / / / / / /

Status messages ■ Hight ■ Slat ■ Automatic ■ Drive locking or movement range limit

———

49


Blind actuator REG‑K/4x24/6

with manual mode

Roller shutter actuator REG‑K/4x/10

with manual mode

Blind actuator REG‑K/x/10 with manual mode


with manual mode

Blind/switch actuator REG‑K/x/x/10 with manual mode



Device width 4 modules 4 modules 4 modules 4 modules 8 modules 8 modules 12 modules

Manual mode push‑buttons —

Connecting terminal (consumer load) Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals

Nominal voltage, AC, 50‑60 Hz AC 230 V — AC 100-240 V AC 100-240 V AC 230 V AC 100-240 V

Nominal voltage, DC — DC 24 V, ±10 % — — — —

Nominal current 6 A, cosϕ = 0,6 6 A 10 A, cosϕ = 0,6 10 A, cosϕ = 0,6 10 A, cosϕ = 0,6 10 A, cosϕ = 0,6

Auxiliary power (optional) — — — — AC 110-240 V, 50-60 Hz, max. 2 VA

AC 110-240 V, 50-60 Hz, max. 2 VA

Software

Configuration switching or blind — — — — —

Defining blind type —

Slat functionality —

Calibration (reference movement)

Movement range limit —

Pause on reverse on change in direction

Extended drive parameters

Control by ■ manual mode via the push‑buttons of the actuator ■ automatic objects or preset objects ■ manual operation via objects

——

Manual mode enable/disable when bus voltage fails — — — — (Precondition: auxiliary power)

(Precondition: auxiliary power)

Locking manual operation via objects —

Weather alarm functions ■ Wind alarm ■ Rain alarm ■ Frost alarm ■ Set the order of priority ■ Behaviour at start/end of the wether alarm

311

311

311

311

311

11—

Alarm functions ■ Behavior at the start/end of the alarm

—

Set the order of priority for higher‑level functions(alarm, weather alarm, locking, movement range)

—

Scenes 4 5 5 5 5 5

Disable function ■ Behavior at the start/end of the locking

—

Behaviour of bus voltage failure / bus voltage recovery / download / / / / / / / / / / / /

Status messages ■ Hight ■ Slat ■ Automatic ■ Drive locking or movement range limit

———

50

Blind/switch actuator REG‑K/8x/16x/10 with manual mode

MTN649908

For independent control of up to 8 blind/roller shutter drives or for switching up to 16 loads via make contacts. The function of the blind or switching channels is freely configurable. All blind/switch outputs can be operated manually using push-buttons.The bus is connected using a bus connecting terminal; a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation.With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Weather alarm. 8-bit positioning for height and slats. Scenes. Status and feedback function. Switch actuator functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel.n Nominal voltage: AC 100-240 V ±10% n Operating voltage: min. AC 90 V - max. AC 265 V n Mains frequency: 50-60 Hz ±10% For each blind output: n Nominal current: 10 A, inductive load cosϕ = 0.6 n Motor load: AC 100 V, max. 434 W AC 230 V, max. 1000 W AC 240 V, max. 1043 W For each switch output: n Nominal current: 10 A, ohmic load cosϕ = 1 n 10 A, inductive load cosϕ = 0.6 Nominal load n Incandescent lamps: AC 100 V, max. 869 W AC 230 V, max. 2000 W AC 240 V, max. 2086 W n Halogen lamps: AC 100 V, max. 739 W AC 230 V, max. 1700 W AC 240 V, max. 1773 W n Fluorescent lamps: AC 100 V, max. 434 VA AC 230 V, max. 1000 VA AC 240 V, max. 1043 VA parallel-compensated n Capacitive load: AC 230 V, 10 A, max. 105 µF External auxiliary voltage (optional): n Nominal voltage: AC 110-240 V ±10% n Operating voltage: min. AC 92 V - max. AC 265 V n Device width: 8 modules = approx. 144 mmNote: The blind actuator/switch actuator cannot be used in conjunction with the weather-dependent automatic functions of the weather combi-sensor/DCF77 art. no. MTN663692. If you require these functions then use the blind actuators art. no. MTN6498...Contents: With bus connecting terminal and cable cover.



KNX

51

Blind / switch actuator REG‑K/12x/24x/10 with manual mode

MTN649912

For independent control of up to 12 blind/roller shutter drives or for switching up to 24 loads via make contacts. The function of the blind or switching channels is freely configurable. All blind/switch outputs can be operated manually using push-buttons.Channel status display via LEDs. A green LED indicates readiness for operation.With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Weather alarm. 8-bit positioning for height and slats. Scenes. Status and feedback function. Switch actuator functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel.n Nominal voltage: AC 100-240 V ±10% n Operating voltage: min. AC 90 V - max. AC 265 V n Mains frequency: 50-60 Hz ±10% For each blind output: n Nominal current: 10 A, inductive load cosϕ = 0.6 n Motor load: AC 100 V, max. 434 W AC 230 V, max. 1000 W AC 240 V, max. 1043 W For each switch output: n Nominal current: 10 A, ohmic load cosϕ = 1 10 A, inductive load cosϕ = 0.6 Nominal load n Incandescent lamps: AC 100 V, max. 869 W AC 230 V, max. 2000 W AC 240 V, max. 2086 W n Halogen lamps: AC 100 V, max. 739 W AC 230 V, max. 1700 W AC 240 V, max. 1773 W n Fluorescent lamps: AC 100 V, max. 434 VA AC 230 V, max. 1000 VA AC 240 V, max. 1043 VA parallel-compensated n Capacitive load: AC 230 V, 10 A, max. 105 µF n External auxiliary voltage (optional): n Nominal voltage: AC 110-240 V ±10% n Operating voltage: min. AC 92 V - max. AC 265 V n Device width: 12 modules = approx. 216 mmNote: The blind actuator/switch actuator cannot be used in conjunction with the weather-dependent automatic functions of the weather combi-sensor/DCF77 art. no. MTN663692. If you require these functions then use the blind actuators art. no. MTN6498...Contents: With bus connecting terminal and cable cover.


Blind actuator REG‑K/2x/10 with manual mode

MTN649802

For independent control of 2 blind/roller shutter drives. The function of the blind channels is freely configurable. All blind outputs can be operated manually using push-button operation.Channel status display via LEDs. A green LED indicates readiness for operation.With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Differentiated disable functions and weather alarms. 8-bit positioning for height and slat. Scenes. Manual/automatic mode. Differentiated status and status feedback functions.For each blind output: n Nominal voltage: AC 100-240 V ±10% n Operating voltage: min. AC 90 V - max. AC 265 V n Mains frequency: 50-60 Hz ±10% n Nominal current: 10 A, inductive load cosϕ = 0.6 n Motor load: AC 100 V, max. 434 W AC 230 V, max. 1000 W AC 240 V, max. 1043 W n Device width: 4 modules = approx. 72 mmn Contents: With bus connecting terminal and cable cover.



KNX

52

Blind actuator REG‑K/4x24/6 with manual mode

MTN648704

For independent control of 4 blind/roller shutter drives. The function of the blind channels is freely configurable. All blind outputs can be operated manually using push-button operation.Channel status display via LEDs. A green LED indicates readiness for operation.With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Differentiated disable functions and weather alarms. 8-bit positioning for height and slat. Scenes. Manual/automatic mode. Differentiated status and status feedback functions.For each blind output: n Nominal voltage: DC 24 V ±10 % n Nominal current: 6 A n Load types: 24 V direct current drives n Device width: 4 modules = approx. 72 mmn Contents: With bus connecting terminal and cable cover.



MTN646704

For independent control of 4 blind/roller shutter drives. With integrated bus coupler and plug-in screw terminals.A green LED indicates readiness for operation after the application has been loaded.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Weather alarms. 8-bit positioning for height and slats. Scenes. Automatic function. Differentiated status and feedback functions.For each blind output: n Nominal voltage: AC 230 V, 50-60 Hz n Nominal current: 6 A, cosϕ = 0.6 n Motor load: AC 230 V, max. 1000 W n Device width: 4 modules = approx. 72 mmn Contents: With bus connecting terminal and cable cover.



Roller shutter actuator REG‑K/4x/10 with manual mode

MTN646704

For independent control of 4 roller shutter drives. The function of the roller shutter channels is freely configurable. All roller shutter outputs can be operated manually using push-button operation.Channel status display via LEDs. A green LED indicates readiness for operation.With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Roller shutter functions: Running time. Idle time. Differentiated disable functions and weather alarms. 8-bit positioning for height. Scenes. Manual/automatic function. Differentiated status and status feedback functions.For each roller shutter output: n Nominal voltage: AC 100-240 V ±10% n Operating voltage: min. AC 90 V - max. AC 265 V n Mains frequency: 50-60 Hz ±10% n Nominal current: 10 A, inductive load cosϕ = 0.6 n Motor load: AC 100 V, max. 434 W AC 230 V, max. 1000 W AC 240 V, max. 1043 W n Device width: 4 modules = approx. 72 mmn Contents: With bus connecting terminal and cable cover.




KNX

53


MTN649804

For independent control of 4 blind/roller shutter drives. The functions of the blind channels is freely configurable. All blind outputs can be operated manually using push-button operation.Channel status display via LEDs. A green LED indicates readiness for operation.With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Differentiated disable functions and weather alarms. 8-bit positioning for height and slat. Scenes. Manual/automatic mode. Differentiated status and status feedback functions.For each blind output: n Nominal voltage: AC 100-240 V ±10% n Operating voltage: min. AC 90 V - max. AC 265 V n Mains frequency: 50-60 Hz ±10% n Nominal current: 10 A, inductive load cosϕ = 0.6 n Motor load: AC 100 V, max. 434 W AC 230 V, max. 1000 W AC 240 V, max. 1043 W n Device width: 4 modules = approx. 72 mmn Contents: With bus connecting terminal and cable cover.



MTN649808

For independent control of 8 blind/roller shutter drives. The functions of the blind channels is freely configurable. All blind outputs can be operated manually using push-buttons.Channel status display via LEDs. A green LED indicates readiness for operation.With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval. Differentiated disable functions and weather alarms. 8-bit positioning for height and slat. Scenes. Manual/automatic mode. Differentiated status and status feedback functions.For each blind output: n Nominal voltage: AC 230 V, 50 - 60 Hz n Nominal current:10 A, cosϕ = 0.6 n Motor load: AC 230 V, max. 1000 W n External auxiliary voltage (optional): AC 110-240 V, 50-60 Hz, max. 2 VA n Device width: 8 modules = approx. 144 mmn Contents: With bus connecting terminal and cable cover.




KNX

54

KNX blind actuator FM with 3 inputs

MTN60030004

1-gang blind actuator with three inputs for installation in a size 60 switch box. Floating contacts can be connected to the three inputs. The inputs have already been assigned to the actuator at the factory, enabling operation without programming.Connection to 230 V via a flexible cable, approx. 20 cm long. The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable. The connecting cable for the inputs can be extended to a max. of 5 m.n KNX software functions: Blind actuator function: Operation mode: Blinds, roller shutters, awnings or ventilation flaps. Raising or lowering times with extension for the upper limit position. Status feedback of the position or of the slat position. Active/passive status feedback, cycl. status feedback function. Up to 5 safety functions (3 wind alarms, 1 rain alarm, 1 frost alarm). Cycl. monitoring. Sun protection function with fixed and variable positions. Shading controls with heating/cooling automatic mode and presence function. Behaviour when bus voltage fails/recovers. Status feedback delay after bus voltage recovery. Priority function. 8 Scene function. Memory function for scenes. n Input function: Free assignment of the switching, dimming, blind and valuator functions. Locking object. Behaviour when bus voltage recovers. Switching: two switch objects per input. Command on rising/falling edge (ON, OFF, TOGGLE, no reaction). Dimming: Single surface and dual-surface operation. Time between dimming and switching and dim step values. Telegram repetition and send stop telegram. Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), Operation concept (Step - Move - Step or Move - Step). Time between short and long operation. Slat adjustment time. Valuator and Scene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge. Value adjustment via long push-button action for valuator. Scene ext. unit with memory function.n Nominal voltage: AC 230 V, 50/60 Hz n Switching current: 3 A, AC1 Nominal output n Motor: AC 230 V, 600 VA n Inputs: 3 n Temperature range: -5 °C to 45 °C n Type of protection: IP 20 n Dimensions: 53x53x28 (WxHxD)Note: For installation in a double box or an electronic box (Kaiser). There must be a minimum gap of 4mm between the 230V connection and the connection for the KNX/Inputs (SELV)




KNX

55

KNX blind and heating actuator with 3 inputs

MTN60030006

1-gang blind actuator and 1-gang heating actuator with three inputs for installation in a size 60 switch box. Floating contacts can be connected to the inputs. The inputs have already been assigned to the actuator at the factory, enabling operation without programming.Connection to 230 V via a flexible cable, approx. 20 cm long. The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable. The connecting cable for the inputs can be extended to a max. of 5 m.n KNX software functions: Blind actuator function: Operation mode: Blinds, roller shutters, awnings or ventilation flaps. Raising or lowering times with extension for the upper limit position. Status feedback of the position or of the slat position. Active/passive status feedback, cycl. status feedback function. Up to 5 safety functions (3 wind alarms, 1 rain alarm, 1 frost alarm). Cycl. monitoring. Sun protection function with fixed and variable positions. Shading controls with heating/cooling automatic mode and presence function. Behaviour when bus voltage fails/recovers. Status feedback delay after bus voltage recovery. Priority function. 8 Scene function. Memory function for scenes. n Heating actuator function: Can be controlled by a control value (1 bit or 1 byte). Status indication (1 bit or 1 byte). Valve control (de-energised open/closed). Summer or winter mode can be selected. Cyclical monitoring of control value. Emergency mode and alarm signal. Priority control (forced setting for summer and winter mode with different values). Behaviour when bus voltage recovers and fails. Overload or short circuit signal. Control of the valve drives (switching or via PWM). Function to protect valves from sticking. n Input function: Free assignment of the switching, dimming, blind and valuator functions. Locking object. Behaviour when bus voltage recovers. n Switching: two switch objects per input. Command on rising/falling edge (ON, OFF, TOGGLE, no reaction). n Dimming: Single surface and dual-surface operation. Time between dimming and switching and dim step values. Telegram repetition and send stop telegram. n Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), Operation concept (Step - Move - Step or Move - Step). Time between short and long operation. Slat adjustment time. Valuator and Scene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge. Value adjustment via long push-button action for valuator. Scene ext. unit with memory function.n Nominal voltage: AC 230 V, 50/60 Hz Blind output n Switching current: 3 A, AC1 Nominal output n Motor: AC 230 V, 600 VA Heating output n Switch contact: Triac n Nominal current: 5 to 25 mA, max. 2 valve drives n Inputs: 3 n Temperature range: -5 °C to 45 °C n Type of protection: IP 20 n Dimensions: 53x53x28 (WxHxD)Note: For installation in a double box or an electronic box (Kaiser). There must be a minimum gap of 4mm between the 230V connection and the connection for the KNX/Inputs (SELV)




KNX

56


KNXOverview of rail mounted devices dimming actuators

Dimminig actuator REG‑K/2x230/300 W

Universal dimming actuator REG‑K/4x230/150 W



Universal dimming actuator REG‑K/230/500 W


Article number MTN646630 MTN649315 MTN649325 MTN649330 MTN649350 MTN649310Number of channels 2 4 4 2 1 1

Device width 6 modules 6 modules 8 modules 4 modules 4 modules 4 modulesManual operation push‑buttons —

Connecting terminal (consumer load) Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals Plug-in screw terminalsNominal voltage

AC 230 V, 50 Hz AC 220-230 V, 50/60 Hz AC 220-230 V, 50/60 Hz AC 220-230 V, 50/60 Hz AC 220-230 V, 50/60 Hz

AC 110-230 V, 50/60 Hz; 0,22-4,3 A

110 V, 50 Hz: 24-480 VA230V, 50 Hz: 50-1000 VA110 V, 60 Hz: 24-400 VA230V, 60 Hz: 50-850 VA

Nominal power at 230 V

■ n Configuration of 4 channels — 4 x 150 W/VA 4 x 250 W/VA — — —

■ n Configuration of 3 channels — 1x300 W/VA, 2x150 W/VA 1 x 500 W/VA, 2 x 250 W/VA — — —

■ n Configuration of 2 channels 2x300 W/VA 2x300 W/VA 2x500 W/VA 2x300 W/VA — —

■ n Configuration of 1 channel — 1x300 W/VA 1x500 W/VA 1x500 W/VA 1x500 W/VA 1x1000 W/VA

Minimum resistive load 25 W 25 W 25 W 25 W 25 W 25 WMinimum resistive‑inductive load 25 VA 50 VA 50 VA 50 VA 50 VA 50 VAMinimum resistive‑capacitive load — 50 VA 50 VA 50 VA 50 VA 50 VAAutomatic load detection —Connection of different Phases — — — — —Input for extension unit operation, lockable (switching, staircase lighting function)

— AC 230 V, 50/60 Hz — AC 230 V, 50/60 Hz AC 230 V, 50/60 HzAC 110-230 V, 50/60 Hz,mechanical push-buttons

SoftwareManual operation enable/disable via bus — Dimming function ■ n Minimum dimming value / Maximum dimming value ■ n Starting behaviour / Memory function ■ n Dimming object switches channel ■ n Value object switches channel ■ n Same dimming time at central function and scenes ■ n Delay times for ON and OFF ■ n Base dimming curve with 3 threholds ■ n Dimming time reduction via object ■ n 4 preconfigured dimming sets for the dimming time

reduction*

/ — /

Only OFF———

1 Treshold at 50 %— —

/ /

/ /

/ /

/ /

/ /

Staircase lighting function with/without manual OFF ■ n Retriggerable ■ n Not retriggerable ■ n Time addable ■ n Prewarn

—————

Scenes (1 byte) — 8 8 8 8 8Central function —Higher priority function

— Disable function Logic operation or priority function

Disable function Logic operation or priority function




Logic operation ■ n AND, OR ■ n Switch object has an inverted impact to the logic

operation

——

Disable function ■ n Behaviour of locking after bus voltage recovery ■ n Behavior at the start/end of the locking

——

Behaviour of bus voltage failure / bus voltage recovery / download

/ / — — / / — / / — / / — / / — / /

Status messages ■ n Switch ■ n Brightness value ■ n Error

——

4 switchable speed sets with 6 values . This corresponds to 24 storable dimming speeds for:Switch on, switch off staircase timer, dim, values , scenes, higher priority functions.

57

Dimminig actuator REG‑K/2x230/300 W






Article number MTN646630 MTN649315 MTN649325 MTN649330 MTN649350 MTN649310Number of channels 2 4 4 2 1 1

Device width 6 modules 6 modules 8 modules 4 modules 4 modules 4 modulesManual operation push‑buttons —

Connecting terminal (consumer load) Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals Plug-in screw terminals Plug-in screw terminalsNominal voltage

AC 230 V, 50 Hz AC 220-230 V, 50/60 Hz AC 220-230 V, 50/60 Hz AC 220-230 V, 50/60 Hz AC 220-230 V, 50/60 Hz

AC 110-230 V, 50/60 Hz; 0,22-4,3 A

110 V, 50 Hz: 24-480 VA230V, 50 Hz: 50-1000 VA110 V, 60 Hz: 24-400 VA230V, 60 Hz: 50-850 VA

Nominal power at 230 V

■ n Configuration of 4 channels — 4 x 150 W/VA 4 x 250 W/VA — — —

■ n Configuration of 3 channels — 1x300 W/VA, 2x150 W/VA 1 x 500 W/VA, 2 x 250 W/VA — — —

■ n Configuration of 2 channels 2x300 W/VA 2x300 W/VA 2x500 W/VA 2x300 W/VA — —

■ n Configuration of 1 channel — 1x300 W/VA 1x500 W/VA 1x500 W/VA 1x500 W/VA 1x1000 W/VA

Minimum resistive load 25 W 25 W 25 W 25 W 25 W 25 WMinimum resistive‑inductive load 25 VA 50 VA 50 VA 50 VA 50 VA 50 VAMinimum resistive‑capacitive load — 50 VA 50 VA 50 VA 50 VA 50 VAAutomatic load detection —Connection of different Phases — — — — —Input for extension unit operation, lockable (switching, staircase lighting function)

— AC 230 V, 50/60 Hz — AC 230 V, 50/60 Hz AC 230 V, 50/60 HzAC 110-230 V, 50/60 Hz,mechanical push-buttons

SoftwareManual operation enable/disable via bus — Dimming function ■ n Minimum dimming value / Maximum dimming value ■ n Starting behaviour / Memory function ■ n Dimming object switches channel ■ n Value object switches channel ■ n Same dimming time at central function and scenes ■ n Delay times for ON and OFF ■ n Base dimming curve with 3 threholds ■ n Dimming time reduction via object ■ n 4 preconfigured dimming sets for the dimming time

reduction*

/ — /

Only OFF———

1 Treshold at 50 %— —

/ /

/ /

/ /

/ /

/ /

Staircase lighting function with/without manual OFF ■ n Retriggerable ■ n Not retriggerable ■ n Time addable ■ n Prewarn

—————

Scenes (1 byte) — 8 8 8 8 8Central function —Higher priority function

— Disable function Logic operation or priority function





Logic operation ■ n AND, OR ■ n Switch object has an inverted impact to the logic

operation

——

Disable function ■ n Behaviour of locking after bus voltage recovery ■ n Behavior at the start/end of the locking

——

Behaviour of bus voltage failure / bus voltage recovery / download

/ / — — / / — / / — / / — / / — / /

Status messages ■ n Switch ■ n Brightness value ■ n Error

——

58

Dimming actuator REG‑K/2x230/300 W

MTN646630

AC 230 V, 50 HzFor switching and dimming incandescent lamps and dimmable, wound transformers (ohmic / inductive load). (Phase control) With integral bus coupler, plug-in screw terminals, short-circuit and overload protection and soft start function to protect the lamps.Readiness for operation is indicated by a green LED after the application has been loaded, and an overload of one channel or both channels is indicated by a flashing light.n KNX software functions: Starting behaviour, memory function, dimming speed, switching off by relative dimming, configurable minimum brightness and behaviour on bus voltage failure/recovery are programmable.n Nominal voltage: AC 230 V, 50 Hz n Nominal power/channel: max. 300 W/VA n Minimum load: 25 W/VA n Short-circuit protection: via fuse n Device width: 6 modules = approx. 108 mmn Contents: With bus connecting terminal and cable cover.




MTN649310

AC 230 V, 50-60 HzFor switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers. (Phase control and phase alignment) With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature protection with soft start function.The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Dimming operation via KNX, extension units and on the device, different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback.n Nominal voltage: AC 110-230 V ±10% n Operating voltage: min. AC 92 V - max. AC 253 V n Mains frequency: 50/60 Hz ±2% Nominal load n Ohmic loads: AC 110 V /50 Hz, 14-480 W AC 230 V /50 Hz, 30-1000 W AC 110 V /60 Hz, 14-400 W AC 230 V /60 Hz, 30-850 W n Inductive/capacitive loads: AC 110 V /50 Hz, 24-480 VA AC 230 V /50 Hz, 50-1000 VA AC 110 V /60 Hz, 24-400 VA AC 230 V /60 Hz, 50-850 VA n Input (extension unit operation): AC 110-230 V, 50/60 Hz (same phase as the dimming channel) n Device width: 4 modules = approx. 72 mmn Extension unit operation: Extension TELE insert MTN573998n Contents: With bus connecting terminal and cable cover.




KNX

59


MTN649350

AC 230 V, 50-60 HzFor switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers. (Phase control and phase alignment) With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature protection with soft start function.The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Dimming operation via KNX, extension units and on the device, different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback.n Nominal voltage: AC 220 - 230 V, 50/60 Hz n Nominal power/channel: max. 500 W/VA 25 W minimum load (ohmic) 50 VA minimum load (ohmic/inductive/capacitive) n Input (extension unit operation): AC 230 V, 50/60 Hz (same phase as the dimming channel) n Device width: 4 modules = approx. 72 mmn Extension unit operation: Extension TELE insert MTN573998n Contents: With bus connecting terminal and cable cover.




MTN649330

AC 230 V, 50-60 HzFor switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers. (Phase control and phase alignment) With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature protection with soft start function.The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Dimming operation via KNX, extension units and on the device, different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback.n Nominal voltage: AC 220 - 230 V, 50/60 Hz n Nominal power/channel: max. 300 W/VA 25 W minimum load (ohmic) 50 W minimum load (ohmic/inductive/capacitive) n Input (extension unit operation): AC 230 V, 50/60 Hz (same phase as the dimming channels) n Device width: 4 modules = approx. 72 mmn Extension unit operation: Extension TELE insert MTN573998n Contents: With bus connecting terminal and cable cover.




KNX

60


MTN649325

AC 230 V, 50-60 HzFor switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers (Automatic load detection). (Phase control and phase alignment)The connection of different outer conductors is allowed.With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature protection with soft start function. For installation onto DIN rails EN 50022. The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected. Bus connection is via bus terminals; a data rail is not necessary.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Dimming operation via KNX, Dimming operation on the device, different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback.n Nominal voltage: AC 220 - 230 V, 50/60 Hz n Channels: 4 (different phases possible) n Nominal power: 4 x 250 W/VA n 3 channels: 1 x 500 W/VA and 2 x 250 W/VA n 2 channels: 2 x 500 W/VA n Minimum load/channel: 25 W (ohmic) 50 VA (ohmic-inductive/ohmic-capacitive) n Device width: 8 HP = approx. 144 mmn Contents: With bus connecting terminal and cable cover.




MTN649315

AC 230 V, 50-60 HzFor switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers. (Phase control and phase alignment) With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature protection with soft start function.The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Dimming operation via KNX, extension units and on the device, different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback.n Nominal voltage: AC 220 - 230 V, 50/60 Hz n Nominal power/channel: max. 150 W/VA 25 W minimum load (ohmic) 50 VA minimum load (ohmic/inductive/capacitive) n Input (extension unit operation): AC 230 V, 50/60 Hz (same phase as the dimming channels) n Device width: 6 modules = approx. 105 mmn Extension unit operation: Extension TELE insert MTN573998n Contents: With bus connecting terminal and cable cover.




KNX

61

KNX universal dimming actuator FM 50‑210 W/VA with 2 inputs

MTN60030003

1-gang universal dimming actuator with two inputs for installation in a size 60 switch box. Floating contacts can be connected to the two inputs. The inputs have already been assigned to the actuator at the factory, enabling operation without programming.Connection to 230 V via a flexible cable, approx. 20 cm long. The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable. The connecting cable for the inputs can be extended to a max. of 5 m.n KNX software functions: Dimming actuator function: Switching and dimming lamps. Switch on and dimming behaviour can be adjusted. Feedback of the switching state and the brightness value. “Soft ON”, “Soft OFF” and time dimmer. Dimming or jumping to brightness values. Time-delayed switch off when a switch off brightness is not reached. Short circuit and load failure signal. Scene operation. Blocked operation via an object with parameterisable brightness value at the beginning and the end of blocking. Behaviour of the dimming actuator after bus voltage recovery. n Input function: Free assignment of the switching, dimming, blind and valuator functions. Locking object. Behaviour when bus voltage recovers. n Switching: two switch objects per input. Command on rising/falling edge (ON, OFF, TOGGLE, no reaction). n Dimming: Single surface and dual-surface operation. Time between dimming and switching and dim step values. Telegram repetition and send stop telegram. n Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), Operation concept (Step - Move - Step or Move - Step). Time between short and long operation. Slat adjustment time. n Valuator and Scene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge. Value adjustment via long push-button action for valuator. Scene ext. unit with memory function.n Nominal voltage: AC 230 V, 50/60 Hz Connected load n Ohmic load: AC 230 V, 50 to 210 W n Incandescent lamps: AC 230 V, 50 to 210 W n Halogen lamps: AC 230 V, 50 to 210 W n LV halogen lamps: 50 to 210 W/VA, wound transformer 50 to 210 W, electronic transformers n Inputs: 2 n Type of protection: IP 20 n Dimensions: 53x53x28 (WxHxD)Note: For installation in a double box or an electronic box (Kaiser). There must be a minimum gap of 4mm between the 230V connection and the connection for the KNX/Inputs (SELV)




KNX

62

Control unit 0‑10 V REG‑K/1‑gang with manual mode

MTN647091

For connecting devices with 0-10 V interface to KNX. With integrated bus coupler and screw terminals (230 V) or plug-in screw terminals (0-10 V). Each individual 230 V switch output can be operated manually with a manual switch. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback, behaviour on bus voltage recovery.n Switch contact: for switching the electronic ballasts/transformers n Nominal voltage: AC 100-240 V ±10% n Operating voltage: min. AC 90 V - max. AC 265 V n Mains frequency: 50-60 Hz ±10% n Nominal current: 16 A, inductive load cosϕ = 0.6 Nominal load n Incandescent lamps: AC 100 V, max. 1600 W AC 230 V, max. 3600 W AC 240 V, max. 3840 W n Halogen lamps: AC 100 V, max. 1086 W AC 230 V, max. 2500 W AC 240 V, max. 2608 W n Fluorescent lamps: AC 100 V, max. 1086 VA AC 230 V, max. 2500 VA AC 240 V, max. 2608 VA parallel-compensated n Capacitive load: AC 100 V, max. 1600 W, 200 µF AC 230 V, max. 3600 W, 200 µF AC 240 V, max. 3840 W, 200 µF n 0-10 V interface: 0.12-100 mA n Voltage range: DC 0-10 V n Device width: 2.5 HP = approx. 45 mmn Contents: With bus connecting terminal and cable cover.



Control unit 0‑10 V REG‑K/3‑gang with manual mode

MTN646991

For connecting devices with 0-10 V interface to KNX. With integrated bus coupler and screw terminals (230 V) or plug-in screw terminals (0-10 V). Each individual 230 V switch output can be operated manually with a manual switch. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback, behaviour on bus voltage recovery.n Switch contact: for switching the electronic ballasts/transformers n Nominal voltage: AC 230 V, 50-60 Hz n Nominal current: 16 A, cosϕ = 0.6 n Switching capacity: AC 230 V, 3600 W, cosϕ = 1 n Capacitive load: AC 230 V, 16 A, 200 µF n Incandescent lamps: AC 230 V, max. 3600 W n Halogen lamps: AC 230 V, max. 2500 W n Fluorescent lamps: AC 230 V, max. 3600 VA, uncompensated AC 230 V, max. 2500 VA, with parallel compensation n LV- halogen lamps with wound transformer: max. 2000 VA n 0-10 V interface: 0.12-100 mA n Voltage range: DC 0-10 V n Device width: 4 HP = ca. 72 mmn Contents: With bus connecting terminal and cable cover.




KNX

63

Analogue actuator REG‑K/4‑gang

MTN682291

The output channels can be parameterised for different current and voltage signals to control different analogue variables (e.g. servomotors). The actuator has four analogue outputs. For use in connection with the analogue actuator module REG/4-gang, 8 analogue outputs are provided. Connections are made using the sub-bus.With continuity checking of the current outputs.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n Auxiliary voltage: AC 24 V (+/-10 %) n Analogue outputs: 4 n Current signals: 0 ... 20 mA, 4 ... 20 mA n Voltage signals: 0 ... 1 V, 0.. 10 V n Continuity checking: 4 ... 20 mA n Outputs: DC 24 V, 100 mA (total) n Device width: 4 modules = approx. 72 mmn In KNX, to be completed with: Power supply REG, AC 24 V/1 A MTN663529n Accessories: Analogue actuator module REG/4-gang MTN682292n Contents: With bus connecting terminal and cable cover.



Analogue actuator module REG/4‑gang

MTN682292

Extension module to extend analogue actuator REG-K/4-gang from 4 to 8 analogue outputs. Connections are made using the sub-bus. The output channels can be independently parameterised for different current and voltage signals to control different control values (e.g. servomotors).For installation on DIN rails TH35 according to EN 60715.n Auxiliary voltage: AC 24 V (+/-10 %) n Analogue outputs: 4 n Current signals: 0 ... 20 mA, 4 ... 20 mA n Voltage signals: 0 ... 1 V, 0.. 10 V (DC) n Continuity checking: 4 ... 20 mA n Outputs: DC 24 V, 100 mA (total) n Device width: 4 modules = approx. 72 mmn In KNX, to be completed with: Analogue actuator REG-K/4-gang MTN682291n Contents: With sub-bus jumper.




KNX

64

Touch panel 7”

MTN62600007

The 7” touch panel is used for the visualisation and control of current building states and functions. The integrated visualisation software with the self-explanatory user interface offers a high level of operating convenience when operating the touch-sensitive TFT display.Windows CE.NET is installed as the operating system. Further functions: n Integrated room temperature controller (measurement and control) n Night reduction of display brightness for improved energy efficiency n LAN programming directly from the ETS Plugin n Real-time week time switch with internet time synchronisation n Presence simulation (recording and play-back of switching habits) n Alarm management n Internet access n Load a slide show n Automatic standby switching n Password protection n Adjustable user interface The 7” touch panel has a LAN (10/100 Mbit/s), KNX and USB interface.. With integrated loudspeaker. Due to its flat design in a flush-mounted housing, its uses range from residential to commercial applications. It can be installed horizontally or vertically.n KNX software functions: Switching, dimming, operation of sunshade systems such as roller shutters, awnings and blinds. Save and retrieve scenes Transmit values. Telegram status display. Temperature display. Logic functions. Disable module. Dynamic language selection via KNX object.n Nominal voltage: AC 230 V, 50 Hz n Power consumption: 2 W in energy-saving mode, 9 W when in operation n Ambient operating temperature: -5°C to 45 °C n Display size: 17.8 cm (7“) n Resolution: 800 x 480 pixels n Display type: TFT n Colours shown: 65.000 n Hardware: 312 MHz Intel XScale PXA270 n RAM: 64 MB n Flash memory: 64 MB n Type of protection: IP 20 n Dimensions: 196x137x52 mm (HxWxD)In KNX, to be completed with: Flush-mounted mounting box for IP touch panel 7” MEG6270-0003, Inner frame set for 7” touch panel MTN6270-01.., Glass frame for 7” touch panel MTN6270-3619, Metal frame for 7” touch panel MTN6270-3714/-3721, Aluminium frame for 7” touch panel MTN6270-37.., Frame for 7” touch panel MTN6270-00..



Inner frame set for 7” touch panel

MTN62700119

The set consists of the inner frame and the USB cover. The design frames, which are available in various types of material, are attached to the touch panel using the inner frame.n In KNX, to be completed with: Touch panel 7” MTN6260-0007, Glass frame for 7” touch panel MTN6270-3619, Metal frame for 7” touch panel MTN6270-3714/-3721, Aluminium frame for 7” touch panel MTN6270-37.., Frame for 7” touch panel MTN6270-00..n Replacement part: USB cover for 7” touch panel MTN6270-02..


MTN62700122 Black 1


KNX

65

Flush‑mounted mounting box for IP touch panel 7”

MTN62700003

For flush-mounted installation of the touch panel 7” and for installing into a cavity wall.DimensionsOuter dimensions: 195x140x55 mm (HxWxD)In KNX, to be completed with: Touch panel 7” MTN6260-0007

Part number Description QtyMTN62700003 Grey 1

Glass frame for 7” touch panel

MTN62703619

Decorative glass frame for 7” touch panel.In KNX, to be completed with: Touch panel 7” MTN6260-0007, Inner frame set for 7” touch panel MTN6270-01..

Part number Description QtyMTN62703619 Brilliant white 1

Metal frame for 7” touch panel

MTN62703721

Decorative solid metal frame for 7” touch panel.In KNX, to be completed with: Touch panel 7” MTN6260-0007, Inner frame set for 7” touch panel MTN6270-01..

Part number Description QtyMTN62703721 Polished brass 1

MTN62703714 Steel

Aluminium frame for 7” touch panel

MTN62703719

Decorative aluminium frame for 7” touch panel.In KNX, to be completed with: Touch panel 7” MTN6260-0007, Inner frame set for 7” touch panel MTN6270-01..

Part number Description QtyMTN62703760 Aluminium 1


MTN62703722 Black 1

Frame for 7” touch panel

MTN62703719

Decorative frame for 7” touch panel.In KNX, to be completed with: Touch panel 7” MTN6260-0007, Inner frame set for 7” touch panel MTN6270-01..


MTN62700022 Black


KNX

66

Push‑button 2‑gang plus with room temperature control unit

MTN62120319

Convenient control unit with 4 operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. With room temperature control unit and display.With 5 red LEDs.The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal.KNX software functions: Functions of the push-buttons: Switching, toggling, dimming, blind control (relative or absolute), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte telegrams (distinction between short and long operation), 8-bit linear regulator, scene retrieval, scene saving, disable functions, timed control with synchronisation, notification functions, the cyclic reading of external temperature values, fan control, operating modes, move setpoints.Functions of the room temperature control unit: Controller type: 2-step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 100% or switching ON/OFF Controller mode: n Heating with one controller output n Cooling with one controller output n Heating and cooling with separate controller outputs n Heating and cooling with one controller output n 2-step heating with 2 control outputs n 2-step cooling with 2 control outputs n 2-step heating and cooling with 4 control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as 1 byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Scene function. n Operation: Menu.n Contents: With bus connecting terminal and supporting plate. n Screw for protection against dismantling. n With protective hood for plaster.





KNX

67

Room temperature control unit with display

MTN62410319

Convenient control unit with 8 operating buttons, operating and status display and labelling field. The operating display can also be used as an orientation light. With room temperature control unit and display. With integrated piezoelectric buzzer to display alarm states and IR receiver. All functions of the respective buttons can be controlled via IR remote control.With 9 red LEDs.The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit display for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display. The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is connected using a bus connecting terminal.KNX software functions: Functions of the push-buttons: Switching, toggling, dimming, blind control (relative or absolute), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte telegrams (distinction between short and long operation), 8-bit linear regulator, scene retrieval, scene saving, disable functions, timed control with synchronisation, notification functions, the cyclic reading of external temperature values, fan control, operating modes, move setpoints.Functions of the room temperature control unit: Controller type: 2-step control, continuous PI controller, switching PI controller (PWM) Output: continuous in the range 0 to 100% or switching ON/OFF Controller mode: n Heating with one controller output n Cooling with one controller output n Heating and cooling with separate controller outputs n Heating and cooling with one controller output n 2-step heating with 2 control outputs n 2-step cooling with 2 control outputs n 2-step heating and cooling with 4 control outputs Operating modes: Comfort, comfort extension, standby, night reduction, frost/heat protection Move all setpoints, save all setpoint temperatures and operating modes when reset, external temperature monitoring, additional output of the control value as 1 byte value on the PWM. Monitoring function for the actual temperature, valve protection function. Scene function. n Operation: Menu.n Transmitter: IR remote control Distance 2010 MTN570222n To be completed with: M-Smart frame, 2-gang without central bridge piece MTN4788.., M-Arc frame, 2-gang without central bridge piece MTN4858.., M-Star frame, 2-gang without central bridge piece MTN4668.., MTN4768.., MTN4868.., M-Plan frames, 2-gang without central bridge piece MTN4888.., MTN5158.., Metal frame, 2-gang without central bridge piece M-Elegance MTN4038.., Wood frame, 2-gang without central bridge piece M-Elegance MTN4058.., Real glass frame, 2-gang without central bridge piece M-Elegance MTN4048..n Contents: With bus connecting terminal and supporting plate. Screw for protection against dismantling. With protective hood for plaster.





KNX

68

Room temperature control unit for properties

MTN62210319

The device is a room temperature control unit and a binary input. Depending on the operating mode, the current temperature setpoint value and the room temperature, a control value for the heating or cooling control unit is transmitted to the KNX. The temperature can either be recorded by the internal or the external temperature sensor which must be connected to the push-button interface. The push-button interface generates an internal signal voltage for connecting max. four conventional push-buttons or floating contacts. Of these, two inputs can be used to connect low current LEDs.With integrated bus coupler. The bus is connected using a bus connecting terminal.KNX software functions: Functions of the room temperature control unit: Controller type: 2-step control, continuous PI control, switching PI control (PWM) Output: continuous in the range 0 to 100% or switching ON/OFF Controller mode: n Heating with one controller output n Cooling with one controller output n Heating and cooling with separate controller outputs n Heating and cooling with one controller output n 2-step heating with 2 control outputs n 2-step cooling with 2 control outputs Operating modes: comfort, comfort extension, standby, night economy, frost/heat protection Operation: Setpoint adjustment can be parameterised in the range with adjusting wheel; presence push-button functions can be parameterised/switched off Valve protection, controller disable Push-button interface functions: Switching, dimming, external blinds, valuator (dimming valuator, extension unit for light scenes with/without memory function, temperature valuator, brightness valuator).Push-button interface: up to 4 inputs, 2 of which can be used as outputs and one for connecting the remote sensor. n Output voltage: 5 V (SELV) n Output current: max. 0.8 mA Max. cable length: Inputs/outputs max. 5 m, remote sensor max. 50 mn Accessories: Remote sensor for room temperature control unit UP/PI MTN616790

Part number Description QtyMTN62210319 Polar white, glossy 1




KNX

69

KNX valve drive with status LED and 2 inputs

MTN69210001

EMO valve drive for heating valves. The device has 2 inputs for window contacts or presence detectors for instance. Valve lift display via red LEDs. With automatic valve lift detection. The valve drive can be connected directly to the KNX. A separate power supply is not required. With integrated bus coupler.n Power consumption: max. 10 mA n Lift: max. 7,5 mm n Positioning force: 120 N n Type of protection: IP 21 n Protection class: III as per EN 60730 n Installation: Snaps onto the valve adapter n Dimensions: (H x Wx D) 82 x 50 x 65 mmn Contents: With 2 valve adapters (VA10/VA78).


KNX fan coil actuator REG‑K

MTN645094

For heating, ventilation and air conditioning control. For controlling fan convectors with up to three speeds, as well as for controlling three-step motor drives (continuous/pulse-width-modulated) or two-step thermal drives. The actuator supports 2-pipe and 4-pipe systems.Two floating binary inputs for window contact and level contact for condensed water container, for example. Connection of 1-speed to 3-speed fans. The multi-function push-button with room temperature control can be used to activate the fan coil actuator.With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Fan control: In automatic mode, the fan speeds are controlled dependently by the control value of the multi-function push-button. The three fan speeds and automatic mode can be switched via EIB telegram. The fan can be controlled either directly or via actuators / suitable dimming actuators. Fan speed feedback is possible via corresponding status feedback objects e.g. status LED of the push-button. The fan speed as well as the automatic status “(Auto)” can be displayed on the display of the multi-function push-button with TCU. Valve control: n Type of controller: PI controller (PWM and continuous). n Controller mode: Heating and/or cooling with common or separate valve outputs. n Operating modes: The operating mode is selected in the multi-function push-button with TCUn Power supply: AC 230 V ±10 %, 50/60 Hz n Power consumption: max. 3 VA n Outputs: 3 floating contacts (fan coil), 2 semi-conductor switches (valve connections) n Switching capacity for valves: 0.5 A, AC 24V - 230 V n Additional relay switching capacity: 16 A n Fan relay switching capacity: 8 A n Inputs: 2, max. cable length 5 m n Operation: Key for fan levels and heating/cooling mode n Displays: 9 status LEDs n Device width: 4 modules = approx. 72 mmn Accessories: Thermoelectric valve drive 230 V MTN639125, Thermoelectric valve drive 24 V MTN639126



KNX

70

Heating actuator REG‑K/6x230/0.05 A

MTN645129

For actuation of thermoelectric valve drives for heating or cooling ceilings. The heating actuator has 6 electronic outputs. Up to 4 valve drives can be connected to each output. The outputs are either switch activated (1 bit) or PWM signal (1 byte) activated. Each output is overload-protected and short-circuit-protected.For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.n KNX software functions: Cycle time, status feedback, summer and winter operation, cyclical monitoring of variables, locking each output in a forced position, behaviour on bus power failure and recovery, overload and short circuit status, mains power loss reporting, collective fault reporting connected to all valves, transmission of the largest 1 byte variable value.n Nominal voltage: AC 230 V, 50-60 Hz n Outputs: 6, electronic n Nominal current: 0.05 A, ohmic n Starting current: max. 1.5 A n Minimum load per used output: 1 valve drive n Number of valve drives max. 4 per output n Device width: 4 modules = approx. 72 mmn Accessories: Thermoelectric valve drive 230 V MTN639125n Contents: With bus connecting terminal and cable cover.



KNX heating actuator FM with 3 inputs

MTN60030005

1-gang heating actuator with three inputs for installation in a size 60 switch box. Floating contacts can be connected to the inputs. Connection to 230 V via a flexible cable, approx. 20 cm long. The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable. The connecting cable for the inputs can be extended to a max. of 5 m.n KNX software functions: Heating actuator function: Can be controlled by a control value (1 bit or 1 byte). Status indication (1 bit or 1 byte). Valve control (de-energised open/closed). Summer or winter mode can be selected. Cyclical monitoring of control value. Emergency mode and alarm signal. Priority control (forced setting for summer and winter mode with different values). Behaviour when bus voltage recovers and fails. Overload or short circuit signal. Control of the valve drives (switching or via PWM). Function to protect valves from sticking. Input function: Free assignment of the switching, dimming, blind and valuator functions. Locking object. Behaviour when bus voltage recovers. n Switching: two switch objects per input. Command on rising/falling edge (ON, OFF, TOGGLE, no reaction). n Dimming: Single surface and dual-surface operation. Time between dimming and switching and dim step values. Telegram repetition and send stop telegram. n Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), Operation concept (Step - Move - Step or Move - Step). Time between short and long operation. Slat adjustment time. n Valuator and Scene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge. Value adjustment via long push-button action for valuator. Scene ext. unit with memory function.n Nominal voltage: AC 230 V, 50/60 Hz n Switch contact: Triac n Nominal current: 5 to 25 mA, max. 2 valve drives n Inputs: 3 n Temperature range: -5 °C to 45 °C n Type of protection: IP 20 n Dimensions: 53x53x28 (WxHxD)Note: For installation in a double box or an electronic box (Kaiser). There must be a minimum gap of 4mm between the 230V connection and the connection for the KNX/Inputs (SELV)



KNX

71

KNX blind and heating actuator with 3 inputs

MTN60030006

1-gang blind actuator and 1-gang heating actuator with three inputs for installation in a size 60 switch box. Floating contacts can be connected to the inputs. The inputs have already been assigned to the actuator at the factory, enabling operation without programming.Connection to 230 V via a flexible cable, approx. 20 cm long. The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable. The connecting cable for the inputs can be extended to a max. of 5 m.n KNX software functions: Blind actuator function: Operation mode: Blinds, roller shutters, awnings or ventilation flaps. Raising or lowering times with extension for the upper limit position. Status feedback of the position or of the slat position. Active/passive status feedback, cycl. status feedback function. Up to 5 safety functions (3 wind alarms, 1 rain alarm, 1 frost alarm). Cycl. monitoring. Sun protection function with fixed and variable positions. Shading controls with heating/cooling automatic mode and presence function. Behaviour when bus voltage fails/recovers. Status feedback delay after bus voltage recovery. Priority function. 8 Scene function. Memory function for scenes. Heating actuator function: Can be controlled by a control value (1 bit or 1 byte). Status indication (1 bit or 1 byte). Valve control (de-energised open/closed). Summer or winter mode can be selected. Cyclical monitoring of control value. Emergency mode and alarm signal. Priority control (forced setting for summer and winter mode with different values). Behaviour when bus voltage recovers and fails. Overload or short circuit signal. Control of the valve drives (switching or via PWM). Function to protect valves from sticking. Input function: Free assignment of the switching, dimming, blind and valuator functions. Locking object. Behaviour when bus voltage recovers. n Switching: two switch objects per input. Command on rising/falling edge (ON, OFF, TOGGLE, no reaction). n Dimming: Single surface and dual-surface operation. Time between dimming and switching and dim step values. Telegram repetition and send stop telegram. n Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), Operation concept (Step - Move - Step or Move - Step). Time between short and long operation. Slat adjustment time. Valuator and Scene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge. Value adjustment via long push-button action for valuator. Scene ext. unit with memory function.n Nominal voltage: AC 230 V, 50/60 Hz Blind output n Switching current: 3 A, AC1 Nominal output n Motor: AC 230 V, 600 VA Heating output n Switch contact: Triac n Nominal current: 5 to 25 mA, max. 2 valve drives n Inputs: 3 n Temperature range: -5 °C to 45 °C n Type of protection: IP 20 n Dimensions: 53x53x28 (WxHxD)Note: For installation in a double box or an electronic box (Kaiser). There must be a minimum gap of 4mm between the 230V connection and the connection for the KNX/Inputs (SELV)


MTN60030006 1


KNX

72

Thermoelectric valve drive 230 V

MTN639125

Thermoelectric valve drive for opening and closing valves. For 2-step or PWM control of heating, air conditioning and ventilation systems, individual room control of surface heaters, control of heating circuit distributors, radiators, convector heaters, cooling ceilings. Operation is carried out by the heating actuator REG-K/ 6x230/0.05 A or a room temperature control unit (230 V) with 2-step or PWM output.Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributors. n First-open function: The drive is factory-set to de-energised open. This allows the heating to be operated during the building shell phase. n De-energised closed n Functional display (open, closed, intermediate settings) n Adjustment control n Protection against dismantling n Plug-in connecting cable n Plug-in assemblyn Supply voltage: AC 230 V, 50/60 Hz n Starting current: max. 300 mA for max. 200 ms n Operating current: 8 mA n Power consumption: 1.8 W n Lift: approx. 4 mm n Running time: 45 s/mm n Positioning force: 100 N n Circulating medium temperature: 0-100°C n Type of protection: IP 54 / II, in all installation positions n Connecting cable: 1 m, 2x0.75 mm² PVC n Dimensions: 60x44x61 mm (HxWxD)n To be completed with: Room temperature control insert with switch MTN536302/04In KNX, to be completed with: Heating actuator REG-K/6x230/0.05 A MTN645129, KNX fan coil actuator REG-K MTN645094, KNX heating actuator FM with 3 inputs MTN6003-0005, KNX blind and heating actuator with 3 inputs MTN6003-0006n Accessories: Valve adapter VA50 for thermoelectric valve drive MTN639150, Valve adapter VA78 for thermoelectric valve drive MTN639178, Valve adapter VA80 for thermoelectric valve drive MTN639180



KNX

73

Thermoelectric valve drive 24 V

MTN639126

Thermoelectric valve drive for opening and closing valves. For 2-step or PWM control of heating, air conditioning and ventilation systems, individual room control of surface heaters, control of heating circuit distributors, radiators, convector heaters, cooling ceilings. Fan coil actuator REG-K or a room temperature control unit (24 V) with 2-step or PWM output activates.Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributors. n First-open function: The drive is factory-set to de-energised open. This allows the heating to be operated during the building shell phase. n De-energised closed n Functional display (open, closed, intermediate settings) n Adjustment control n Protection against dismantling n Plug-in connecting cable n Plug-in assemblyn Supply voltage: AC/DC 24 V +20%/-10%, 0-60 Hz n Starting current: max. 250 mA for max. 2 min n Operating current: 75 mA n Power consumption: 1.8 W n Lift: approx. 4 mm n Running time: 45 s/mm n Positioning force: 100 N n Medium temperature: 0-100°C n Type of protection/protection class: IP 54 / II, in all installation positions n Connecting cable: 1 m, 2x0.75 mm² PVC n Dimensions: 60 x 44 x 61 mm (HxWxD)n To be completed with: Room temperature control insert with switch MTN536302/04, Power supply REG, AC 24 V/1 A MTN663529In KNX, to be completed with: Heating actuator REG-K/6x230/0.05 A MTN645129, KNX fan coil actuator REG-K MTN645094, KNX heating actuator FM with 3 inputs MTN6003-0005, KNX blind and heating actuator with 3 inputs MTN6003-0006, Power supply REG, AC 24 V/1 A MTN663529n Accessories: Valve adapter VA50 for thermoelectric valve drive MTN639150, Valve adapter VA78 for thermoelectric valve drive MTN639178, Valve adapter VA80 for thermoelectric valve drive MTN639180




KNX

74

Valve adapter VA50 for thermoelectric valve drive

MTN639150

For Honeywell+Braukmann, Reich, Landis+Gyr, MNG, Cazzagniga.Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributorsn To be completed with: Thermoelectric valve drive 230 V MTN639125, Thermoelectric valve drive 24 V MTN639126



MTN639178

For Danfoss RA.Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributorsn To be completed with: Thermoelectric valve drive 230 V MTN639125, Thermoelectric valve drive 24 V MTN639126



MTN639180

For Heimeier, Herb, Onda, Schlösser (from 1993), Oventrop M30x1.5, TeSa.Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributorsn To be completed with: Thermoelectric valve drive 230 V MTN639125, Thermoelectric valve drive 24 V MTN639126a


Power supply REG, 24 V DC / 0.4 A

MTN693003

Power supply for 24 V binary inputs. For installation onto DIN rails EN 50022. With integrated overload and short-circuit protection.For installation on DIN rails TH35 according to EN 60715.n Primary supply: AC 230 V, 48-63 Hz n Output voltage: DC 24 V +/- 3 % n Output current: max. 0.4 A n Output power: max. 10 W n Device width: 1 module = approx. 18 mmn For supplying power to: Binary input REG-K/4x24 MTN644892, Binary input REG-K/8x24 MTN644792, KNX/IP router REG-K MTN680329, IP touch panel 10” MTN683090



Power supply REG, 24 V DC / 1.25 A

MTN693004

Power supply for 24 V binary inputs, REG-K panel control, KNX/IP router REG-K, 10” IP touch panel.With integrated overload and short-circuit protection.For installation on DIN rails TH35 according to EN 60715.n Primary supply: AC 100-240 V, 50-60 Hz n Output voltage: DC 24 V +/- 3 % n Output current: max. 1.25 A n Output power: max. 30 W n Device width: 4 modules = approx. 72 mmn For supplying power to: Binary input REG-K/4x24 MTN644892, Binary input REG-K/8x24 MTN644792, KNX/IP router REG-K MTN680329, IP touch panel 10” MTN683090, TeleController Plus REG-K MTN680790




KNX

75

Power supply REG, AC 24 V/1 A

MTN663529

Power supply for 24 V binary inputs, weather station REG-K/4-gang, analogue input module REG-K/4-gang, rain sensor, wind sensor with 0 - 10 V interface and heating, KNX/IP router REG-K.With fuse.For installation on DIN rails TH35 according to EN 60715.n Primary supply: AC 230 V, +/- 10 %, 50-60 Hz n Output voltage: AC 24 V n Output current: max. 1 A n Fuse: 5x20 mm, 250 V, T 160 mA n Device width: 5 modules = approx. 90 mmn For supplying power to: Binary input REG-K/8x24 MTN644792, Weather station REG-K/4-gang MTN682991, Analogue input module REG/4-gang MTN682192, Rain sensor MTN663595, Wind sensor with 0-10 V interface and heating MTN663592, KNX/IP router REG-K MTN680329, Thermoelectric valve drive 24 V MTN639126n Contents: With spare fuse.



KNX

76

Simple and intelligent

77

The CONNECT radio system is the perfect solution for anyone who wants to modernise their electrical installation. It offers a great amount of flexibility, comfort and safety where the control of functions like lighting, blinds or multimedia is concerned.

The CONNECT radio system is a bi-directional radio network which allows all devices to transmit and receive signals simultaneously.

Connect

Z‑Wave technology Mesh system for high signal integrity & reliability.

Remote access emote access and control via the web when you need to be in touch away from home.

Comprehensive system integrationPart of a wider Z wave alliance of over 650 products provide integration of Lighting, Safety, Security, Multi media, Comfort, Convenience and Energy Efficiency.

Part of the UItimate familyCommon aesthetics and finishes allow Connect to be integrated seamlessly with new and existing Ultimate wiring accessory installations.

78

ConnectLighting control & automation

Explanation of symbols

Z-Wave standard

The device can assume the functions of the system administrator.

The device has the routing function. It automatically relays signals and maintains fault-free operation.

The device transmits signals.

The device receives signals and switches accordingly e.g. light or roller shutter.

The EASY CONNECT method is not available or only available with restrictions.

Switching

230 V incandescent lamps

230 V halogen lamps

fluorescent lamp

Dimmable, wound transformers

Electronic transformers for trailing edge dimmer

Dimming/switching ■ Surface-mounted visible installation possible in conjunction with surface-mounted housing. ■ The following applies for all types of dimmers: If the dimmers cannot dissipate sufficient heat (cavity walls, multiple combinations and surface-mounted combinations), the connected loads specified may not be exploited to the maximum.

230 V incandescent lamps

230 V halogen lamps

Dimmable, wound transformers

Electronic transformers for trailing edge dimmer

79

ConnectFunctions and device overview


Devices Device features Radio functions

Radio features

EASY CONNECT CONNECT radio configuration (additional)

CONNECT radio central unit, schneider-electric@home, colourMTN5059..

■ Central device eight freely programmable operating buttons

■ User interface schneider-electric@home

■ Central control and

visualisation of the radio system

■ Administration of central functions of the radio system (scenes, annual time switch programs, history function)

M

TV

DVD

14

2 35 6

7 8 9

0

+ +

STB

R

z CONNECT radio universal remote controlMTN50510000

■ Remote control for the radio receivers, Merten IR devices and up to five IR AV devices

■ Switch on,

switch off, toggle, dim, raise/lower roller shutters, scene

■ Graphic programming of all CONNECT functions

CONNECT radio push-button, MoveMTN5080.., MTN5081..

■ Battery-powered mobile radio transmitter

■ Toggle, dim ■ Switch on, switch off, ■ push-button operation (bell),

scene

CONNECT radio push-button, 1-gangMTN5061.., MTN5051..

■ Operator button, battery-powered, 2 channels, 12 radio receivers per channell

■ Switch on,

switch off, dim, raise/lower roller shutters

■ Toggle, push-button operation (bell), scenes, division of channels

CONNECT radio push-button, 2-gangMTN5062.., MTN5052..

■ Operator button, battery-powered, 4 channels, 12 radio receivers per channell

■ Switch on,

switch off, dim, raise/lower roller shutters

■ Toggle, push-button operation (bell), scenes, division of channels

CONNECT radio transmitter flush-mounted, 4-gangMTN506004

■ Battery-powered, for up to 4 floating switch contacts

■ Receiver can be remote-controlled via push-buttons

■ Switch on, switch off, dim,

raise/lower shutters, push-button operation (bell), configuration as push-button or switch for all inputs

CONNECT radio receiver, 1-gang switchMTN50110011AC 230 V, 10 A

■ Switching one load via make contact

■ Switch on,

switch off, toggle

■ Staircase lighting function, ON/OFF delay

CONNECT radio receiver, 1-gang universal dimmer MTN50100011AC 230 V, 25 VA-250 VA

■ Switching and dimming external loads

■ Switch on (to

memory value), switch off, dim

■ Adjustable dimming speed, staircase lighting function, master/slave, brightness limit, switch on to brightness limit, memory function that can be switched off

CONNECT radio receiver, flush-mounted, 2-gang switch MTN50120011AC 230 V, 6 A

■ Switching two loads via make contact

■ Only channel

1 can be used: Switch on, switch off, toggle

■ Channel 2 can be used: staircase lighting function, ON/OFF delay

CONNECT radio receiver, flush-mounted, 1-gang switch, 2-pole MTN50110012AC 230 V, 10 A

■ Switching one load via make contact a 2-pole make contact

■ Switch on,

switch off, toggle


CONNECT radio receiver, flush-mounted, 1-gang roller shutter MTN50150011AC 230 V, 6 A, cosϕ =0,6; 500 VA

■ Controlling one roller shutter drive

■ Roller shutter

Up/Down, Stop ■ Slat, up/down duration

80


Devices Device features Radio functions

Radio features

EASY CONNECT CONNECT radio configuration (additional)

Connect 230 V radio Transmitter CONNECT, 2-gangMTN50160012

■ 230 V-powered, with two 230 V input channels (e.g. to connect twilight switches)

■ 12 radio receivers per channel

■ Only channel

1 can be used: Toggle, dim, shutter control

■ Channel 2 can be used: switch on, switch off, dim, raise/lower shutters,

■ push-button operation (bell), configuration as push-button or switch for all inputs

RF Router CONNECTMTN50180010

■ Router

■ Graphical integration of the router into the RF System CONNECT

CONNECT radio plug adapter, switchMTN50600119, BS plugAC 230 V, 50 Hz16 A, cosϕ=1, max. 35mF

■ Switching external loads with plug.

■ Switch on, switch off, toggle


CONNECT radio plug adapter, universal dimmerMTN50610119, BS plugAC 230 V, 50 Hz40 VA-350 VA

■ Switching and dimming external loads with plug

■ Switch on (to memory value), switch off, dim

■ Adjustable dimming speed, staircase lighting function, brightness limit, switch on to brightness limit, memory function that can be switched off

Radio ARGUS 220 CONNECTMTN5052-31..

■ Outdoor movement detector

■ Up to 4 movement detectors can be networked and set via the remote control for radio ARGUS 220 CONNECT

■ Fully integrate the radio

ARGUS into the radio network

■ Teaching receiver ■ Use function module like

scene, message and alarm

Remote control for ARGUS 220 CONNECTMTN50521100

■ Radio remote control ■ Functions: permanent

ON, permanent OFF, automatic, brightness threshold, switching duration, set and change the sensitivity to movement.

■ Up to 4 radio

ARGUS 220 CONNECT can be networked and set via the remote control.

81


Central unit, schneider‑electric@home, colourCentral device with eight freely programmable operator buttons and 3.5” colour display for the central control and visualisation of a CONNECT radio system. The user interface is schneider-electric@home. Radio features: RouterThe radio central unit is configured with the CONNECT radio configurator. It is installed in a flush-mounted double box. For the flush mounted power supply an additional flush-mounted box is covered by the radio central unit.n Functions:

- Administration of central functions of the radio system (32 scenes, time switch with 20 weekly and 12 annual time switch programs, 1 history function)- IP address: fixed or dynamic assignment via DHCP- Integrated web server for PC operation, touch panel, PDA operation with schneider-electric@home- Integrated real-time clock with reserve power of 4 hrs.- Piezo loudspeaker for acoustic alarm- Alarm/message display and additional e-mail forwarding- Signalling when e-mails arrive- Multimedia application: Controlling network mp3 players or streaming clients- JPG image slide shows (FTP server on the Network)- Displaying current news (RSS feeds)

n Power consumption: max. approx. 7 W n Power supply: DC 24 V, 0.3 A n Operating elements: clickwheel, arrow buttons, back key, home key, 8 operator buttons for direct access n Display size: 3.5“ (8.9 cm) n Resolution: 320 x 240 pixels n Display type: TFT with 16 million colours n Interfaces: 1 x RJ45 Ethernet 10/100 MBit/s; CONNECT radio system n Memory: 8 MB Flash/RAM n Radio frequency: 868 MHz n Radio range: up to 50 m in free field, up to 20 m indoors n Dimensions: 220 x 105 x 50 mm (HxWxD) n Type of protection: IP 20n Accessories: Power supply, flush-mounted MTN505599n Note: A RJ45 crossover lead for field assembly is recommended for the Ethernet connection

The configuration software is available on the Internet.n Contents: With design frame.




MTN505919

Central unit power supply, flush‑mounted

MTN505599

For supplying power to the CONNECT radio central unit.The power supply is installed via a flush-mounted box directly above the radio central unit’s flush-mounted double box.n Primary supply: AC 230 V, 48-63 Hz n Output voltage: DC 24 V +/- 3 % n Output current: max. 0.5 A n Connecting terminals:Screw terminalsn For supplying power to: CONNECT radio central unit, schneider-electric@home, colour MTN5059.


MTN505599 Power supply, flush-mounted 1

Central unit back boxesBoth back boxes are required to install the central unit.


ALB71322 50mm 1 gang back box 1

ALB71335 50mm 2 gang back box 1

82


Software configuration tool & USB dongle

MTN506801

The radio system is conveniently configured on the PC using the CONNECT radio configuration tool and the radio USB data interface. The data interface is only required during programming.n Functions: ■ - “plug and play” installation ■ - Driver for all common Windows operating systems ■ - Fastening clip for fastening on to a Notebook display ■ - Power supply via the PC’s USB interface.

n Note: Software and updates available at www.schneider-electric.com. Follow the link to your local webside.n Contents: CD with CONNECT radio configuration tool, USB cable.


MTN506801 CONNECT radio USB data interface 1

Universal remote control

MTN50510000

n Radio remote control and IR remote control in a single device. For activating:- Devices in the CONNECT radio system- Schneider-Electric and Merten IR devices- Up to four IR AV devices such as TV,VCR, DVB-T, CTV, DVD/ TER, AUX

With the remote control, 6 groups or scenes can be controlled on each of 2 levels. 12 devices can be connected for each button pair.Radio features: System administrator, transmittern Functions:Easy CONNECT:

- Switch on, switch off, dim, raise/lower roller shutters, scene- Programming in EASY CONNECT as a system administrator

n Additionally with CONNECT radio configuration tool:- Graphical programming of the functions

n Extended functions for IR/AV:- Supports more than 1,000 manufacturers. The IR codes are selected from a list or by using the search function.- Teach-in function for IR codes using the original remote control

n Radio frequency: 868 MHzn Radio range: up to 100 m in free field, up to 30 m indoorsn IR range: up to 15 mn Battery: 3 microcells (IEC LR 03, AAA)n Display element: multi-colour LEDn Note: The device can assume the properties of a system administrator. The remote controlmust be used as the system administrator in connection with the EASY CONNECT method. Inconnection with the CONNECT radio configurator, it can be used as required.n Contents: With battery.n With a codes table for nearly all conventional devices, like TV,VCR, DVB-T, CTV, DVD/ TER,AUX ...



83


Move push‑buttons

MTN508119

Battery-powered mobile radio transmitter with 1 channel. For activating the CONNECT radio system’s radio receiver. A maximum of 12 radio receivers can be connected. Radio features: System administrator (see note)Suitable for sticking onto walls or glass, screwing onto walls or flush-mounted boxes, or installing in a multiple combination.n Functions:- Easy CONNECT: Toggle, dim- With CONNECT radio configuration tool: - additionally switch on, switch off, push-button operation (bell), scenesn Channels: 1n Radio frequency: 868 MHzn Range: up to 100 m in free field, up to 30 m indoorsn Battery: 1 lithium button cell (CR 2450N)n Battery life: > 5 yearsn Display elements: LED for transmission confirmation/programmingn Operating elements: 1 buttonn Dimensions: 44 x 12.5 mm (Ø x H)Note: The device can assume the features and characteristics of the system administrator. As this a mobile device we recommend that you select a fixed device as system administrator. For example, use a Connect 1 gang push-button.n Contents: Battery, wall bracket, double-sided adhesive strips, single-sided adhesive foils aluminium-coloured, screws, dowels.Note: Frames sold separately.





MTN508119 & MTN515119

Move push‑button framesPart number Description Qty




84


1 gang push‑buttons

MTN506119

Battery-powered radio transmitter with 2 channels. For activating the CONNECT radio system’s radio receiver. A maximum of 12 radio receivers per channel can be connected. Radio features: System administratorSuitable for sticking onto walls or glass, screwing onto walls or flush-mounted boxes, or installing in a multiple combination.n Functions:- EASY CONNECT: Switch on, switch off, dim, raise/lower roller shutters- With CONNECT radio configuration tool: additionally toggle, push-button operation (bell), scenes, division of channelsn Channels: 2n Radio frequency: 868 MHzn Range: up to 100 m in free field, up to 30 m indoorsn Battery: 1 lithium button cell (CR 2450N)n Battery life: > 5 yearsn Display elements: LED for transmission confirmation/programmingn Operating elements: 2 buttonsn Contents: Battery, retaining plate, double-sided adhesive strips, single-sided adhesive foils aluminium coloured, screws, dowels.Note: Ultimate frames are sold separately.





Ultimate screwless flat plate Connect front platesPart number Description Qty

GU8432** 1 module 1

2 gang push‑buttons

MTN506219

Battery-powered radio transmitter with 4 channels. For activating the CONNECT radio system’s radio receiver. A maximum of 12 radio receivers per channel can be connected. Radio features: System administratorSuitable for sticking onto walls or glass, screwing onto walls or flush-mounted boxes, or installing in a multiple combination.n Functions:- EASY CONNECT: Switch on, switch off, dim, raise/lower roller shutters- With CONNECT radio configuration tool: additionally toggle, push-button operation (bell), scenes, division of channelsn Channels: 4n Radio frequency: 868 MHzn Range: up to 100 m in free field, up to 30 m indoorsn Battery: 1 lithium button cell (CR 2450N)n Battery life: > 5 yearsn Display elements: LED for transmission confirmation/programmingn Operating elements: 4 buttonsn Contents: Battery, retaining plate, double-sided adhesive strips, single-sided aluminium coloured adhesive foil, screws.Part number Description QtyMTN506219 Polar white, glossy 1MTN505214 Anthracite 1MTN505260 Aluminium 1

GU8432BN

GU8432PN

Note Replace ** with suffix code to denote finish required:SS Stainless steel PB Polished brass PW Painted whitePC Polished chrome PN Pearl nickel BN Black nickel

85

2 gang wired transmitter

MTN50160012

Radio transmitter with 2 inputs for 230V switching contacts (e.g. light-sensitive switch). For remote control of other receivers of the CONNECT radio system. n Radio features: Transmitter, router (see note) n Automatic recognition of the connected devices (switches or push-buttons).- With screw terminals.- Suitable for surface mounting.- Integrated fixing holes.n Functions:- Easy Connect: channel 1 can be used to toggle, dim or shutter control- With CONNECT radio configuration tool: channel 2 usablen Channels: 2n Radio frequency: 868 MHzn Range: up to 100m in free field, up to 30m indoorsn Nominal voltage: AC 230V, 50/60Hzn Power consumption: < 1 Wn Display elements: LEDn Operating elements: Push-buttons for programmingn Type of protection: IP 20n Dimensions: 29 x 54 x 135mm (H x W x D)Note: The device can assume the features and characteristics of the system administrator.


MTN50160012 2 gang push-button 1

4‑gang battery powered transmitter

MTN506004

Battery-powered radio transmitter for connecting up to 4 floating switch contacts (e.g. standard push-buttons). For the remote control of other receivers from the CONNECT radio system via push-buttons from the Merten switch ranges.n Radio features: Transmittern Automatic recognition of the connected devices (switches or push-buttons).n Suitable for installation underneath push-button inserts or in empty flush-mounted boxes.n Functions:- With CONNECT radio configuration tool: Switch on, switch off, toggle, dim, raise/lower shutters, push-button operation (bell), configuration as push-button or switch for all inputs.n Channels: 4n Radio frequency: 868 MHzn Range: up to 100 m in free field, up to 30 m indoorsn Battery: 1 lithium button cell (CR 2450N)n Battery life: > 5 yearsn Display elements: LEDn Operating elements: Push-buttons for programmingn Dimensions: 43 x 41 x 14 mm (H x W x D)


MTN506004 4-gang battery powered transmitter 1


86

1 gang switch receiver

MTN50110011

For switching loads via a make contact. Can be remote-controlled via transmitters in the CONNECT system.n Radio features: Router- With screw terminals.- Suitable for surface mounting.- Integrated fixing holes.n Functions:- EASY CONNECT: Switch on, switch off, toggle- With CONNECT radio configuration tool: additionally staircase lighting function, ON/OFF delayn Channels: 1n Radio frequency: 868 MHzn Range: up to 100 m in free field, up to 30 m indoorsn Nominal voltage: AC 230 V, 50/60 Hzn Power consumption: < 1 Wn Connected loads:Incandescent lamps: AC 230 V, 2000 Wn Halogen lamps: AC 230 V, 1500 Wn Capacitive load: 35 µFn Display elements: LEDn Operating elements: Push-buttons for programmingn Type of protection: IP 20n Dimensions: 29 x 54 x 135 mm (H x W x D)n Accessories: Capacitor MTN542895


MTN50110011 1 gang switch receiver 1

2 gang switch receiver

MTN50120011

For switching two loads via make contact. Can be remote-controlled via CONNECT radio system transmitters.n Radio features: router- With screw terminals.- Suitable for surface mounting.- Integrated fixing holes.n Functions:- EASY CONNECT: 1. Channel can be used, switch on, switch off, toggle- With CONNECT radio configuration tool: 2. Channel + additionally staircase lighting function, ON/OFF delayn Channels: 2n Radio frequency: 868 MHzn Range: up to 100 m in free field, up to 30 m indoorsn Nominal voltage: AC 230 V, 50/60 Hzn Power consumption: < 1 Wn Connected loads:Incandescent lamps: AC 230 V, 600 Wn Halogen lamps: AC 230 V, 600 Wn Display elements: LEDn Operating elements: Push-buttons for programmingn Type of protection: IP 20n Dimensions: 29 x 54 x 135 mm (H x W x D)n Accessories: Capacitor MTN542895Note: Do not connect any capacitive loads.


MTN50120011 2 gang switch receiver 1


87

1 gang 2‑pole switch receiver

MTN50110012

For switching a load via a 2-pole make contact. Can be remote-controlled via CONNECT radio system transmitters.n Radio features: router- With screw terminals.- Suitable for surface mounting.- Integrated fixing holes.n Functions:- EASY CONNECT: Switch on, switch off, toggle- With CONNECT radio configuration tool: additionally staircase lighting function, ON/OFF delayn Channels: 1n Radio frequency: 868 MHzn Range: up to 100 m in free field, up to 30 m indoorsn Nominal voltage: AC 230 V, 50/60 Hzn Power consumption: < 1 Wn Connected loads:Incandescent lamps: AC 230 V, 1200 Wn Halogen lamps: AC 230 V, 800 Wn Capacitive load: 14 µFn Display elements: LEDn Operating elements: Push-buttons for programmingn Type of protection: IP 20n Dimensions: 29 x 54 x 135 mm (H x W x D)n Accessories: Capacitor MTN542895


MTN50110012 1 gang 2-pole switch receiver 1

Switch plug adaptor

MTN50600119

For switching external loads with British Standard plug. n Radio features: router- Manual operation via the sensor surface and remote control possible via CONNECT radio system transmitters.n Functions:- EASY CONNECT: Switch on, switch off, toggle- With CONNECT radio configuration tool: additionally staircase lighting function, ON/OFF delayn Channels: 1n Radio frequency: 868 MHzn Range: up to 100 m in free field, up to 30 m indoorsn Nominal voltage: AC 230 V, 50 Hzn Power consumption: < 1 Wn Incandescent lamps: AC 230 V, max. 2000 Wn Halogen lamps: AC 230 V, max. 2000 Wn Capacitive load: max. 35 µFn Display elements: LEDn Operating elements: Sensor surface for local operation and programmingn Type of protection: IP 20n Dimensions: 120x65x38 mm (HxWxD)




88

Universal dimmer receiver

MTN50100011

To switch and dim external loads.n Radio feature: router- For ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transformers and electronic transformers. (Phase control or phase alignment).- Manual operation using the key on the device via an extension unit and remote controlled using the CONNECT radio system’s transmitter.- The integrated universal dimmer automatically recognises the connected load. Do not connect any mixed loads. With overload protection, short circuit protection and memory function.- Suitable for surface mounting.- Integrated fixing holes.n Functions:- EASY CONNECT: Switch on (to memory value), switch off, dim- With CONNECT radio configuration tool: additionally adjustable dimming speed, staircase lighting function, master/slave, brightness limit, switch on to brightness limit, memory function that can be switched offn Channels: 1n Radio frequency: 868 MHzn Range: up to 100 m in free field, up to 30 m indoorsn Nominal voltage: AC 230 V, 50/60 Hzn Power consumption: < 1 Wn Minimum load: 25 VAn Maximum load: 250 VAn Display elements: LEDn Operating elements: Push-buttons for programmingn Type of protection: IP 20n Dimensions: 29 x 54 x 135 mm (H x W x D)n Accessories: Capacitor MTN542895


MTN50100011 Universal dimmer receiver 1

Universal dimmer plug adaptor

MTN50610119

For switching and dimming external lighting loads with British Standard plug.n Radio features: router- For ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transformers and electronic transformers. (Phase control or phase alignment).- Manual operation via the sensor surface and remote control possible via CONNECT radio system transmitters.- The integrated universal dimmer automatically recognises the connected load. Do not connect any mixed loads.- With memory function, can be switched off.n Functions:- EASY CONNECT: Switch on (to memory value), switch off, dim- With CONNECT radio configuration tool: additionally adjustable dimming speed, staircase lighting function, brightness limit, switch on to brightness limit, memory function that can be switched offn Channels: 1n Radio frequency: 868 MHzn Range: up to 100 m in free field, up to 30 m indoorsn Nominal voltage: AC 230 V, 50 Hzn Power consumption: < 1 Wn Minimum load: 40 VAn Maximum load: 350 VAn Display elements: LEDn Operating elements: Sensor surface for local operation and programmingn Type of protection: IP 20n Dimensions: 120x65x38 mm (HxWxD)




89

Change‑over relay receiver

MTN50150011

For controlling a roller shutter drive. Can be remote-controlled via CONNECT radio system transmitters.n Radio features: router- With screw terminals.- Suitable for surface mounting.- Integrated fixing holes.n Functions:- EASY CONNECT: Roller shutter Up/Down, Stop- With CONNECT radio configuration tool: Louvres, up/down durationn Channels: 1n Radio frequency: 868 MHzn Range: up to 100m in free field, up to 30m indoorsn Nominal voltage: AC 230V, 50/60Hzn Power consumption: < 1 Wn Connected loads:Motor load: AC 230 V, 500 VAn Display elements: LEDn Operating elements: Push-buttons for programmingn Type of protection: IP20n Dimensions: 29 x 54 x 135mm (H x W x D)n Accessories: Capacitor MTN542895


MTN50150011 Change-over relay receiver 1

CONNECT radio router, surface‑mounted

MTN50180010

Router to extend the range of the CONNECT radio system.n Radio features: router- With screw terminals.- Suitable for surface mounting.- Integrated fixing holes.n Functions:- With CONNECT radio configurator: Integration in the CONNECT radio systemn Radio frequency: 868 MHzn Range: up to 100m in free field, up to 30m indoorsn Nominal voltage: AC 230V, 50/60Hzn Power consumption: < 1 Wn Display elements: LEDn Operating elements: Push-buttons for programmingn Dimensions: 29 x 54 x 135mm (H x W x D)


MTN50180010 CONNECT radio router, surface-mounted 1


90

ARGUS 220 movement detectors

MTN50523119

Electronic movement detector. 220° surface monitoring for large house fronts and sections of the house.n 360° short-range zone (approx. 4 m radius).n Large wiring compartment and plug system.n Looping is possible.n LED function display for fast alignment at the installation site.n Operating elements are protected under the easily accessible cover plate.n Flexibly adjustable sensor head.n Possible to blank out individual lens areas.Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket.n Functions:- Up to four radio ARGUS 220 CONNECT devices or switch actuators can be networked and set via the remote control (permanent ON, permanent OFF, automatic, brightness threshold, switching time, set and change the sensitivity to movement.)

n In conjunction with the CONNECT radio configuration tool, you can:- Fully integrate the radio ARGUS 200 CONNECT into the radio network and network with other devices.- Use function module like scene, message and alarm.- Twilight switch function.n Nominal voltage: AC 230V, 50 Hzn Incandescent lamps: AC 230V, max. 2000Wn Halogen lamps: AC 230V, max. 2000Wn Fluorescent lamps: AC 230V, 1200W uncompensatedn Capacitive load: max. 35 µFn Max. switching current: 16A, AC 230V, cosϕ = 1n Angle of detection: 220°n Range: max. 16mn Number of levels: 7n Number of zones: 112 with 448 switching segmentsn Light sensor: continuously adjustable from 3-1000 luxn Time: 1 sec. to approx. 8 min. in 6 stepsn Sensitivity: continuously adjustablen Neutral conductor: requiredn Sensor head adjustment for wall mounting: - 9° up, 24° down, 12° left/right, ±12° axialn Sensor head adjustment for ceiling mounting: - 4° up, 29° down, 25° left/right, ±8.5° axialn EC guidelines: Low voltage directive 2006/95/EEC and EMC directive 2004/108/EECn Radio frequency: 868 MHzn Transmission range: up to 100 m in free field, up to 30 m indoorsn Type of protection: IP 55n Dimensions: 151x93x71mm (HxWxD)n Accessories: Remote control for radio ARGUS 220 CONNECT MTN5052-1100, Mounting bracket TN565291, Capacitor MTN542895n Contents: With cover plate and segments to limit the area of detection, screws and plugs.





91

Remote control for ARGUS 220

MTN50521100

One radio ARGUS 220 CONNECT or one radio receiver switch each can be linked, networked and set for each key (A1-A4) on the remote control.n Functions: You can set the following functions on the ARGUS: Operating mode (permanent ON, permanent OFF, automatic), brightness threshold, switching duration, set and change the sensitivity to movement.n Channels: 4n Radio frequency: 868 MHzn Range: up to 100 m in free field, up to 30 m indoorsn Battery: 1 lithium button cell (CR 2450N)n Display elements: Status LEDn Receiver: Radio ARGUS 220 CONNECT MTN5052-31.n Contents: With battery.


MTN50521100 Remote control for ARGUS 220 1

MTN542895

CapacitorFor use in push-button circuits to prevent flickering of the neon lamp and/or instantaneous switching of the installation relay when several push-buttons with neon lamps are in use.For interference suppression of inductive loads, e.g. relays, contactors, fluorescent lamps, transformers, if the induction voltage of these devices leads to the retriggering of the ARGUS.


MTN542895 AC 230 V, 0.33 µF 1


92

Taking your home into a new dimension

With today’s homeowners demanding more from their electrical installations, the need for greater control has never been more important. With its modern design, Sphere conveys style and sophistication with simple installation.

Total lighting control

93

SphereHow does it work sectionSphere operates by sending a coded wireless signal from a controller to the wired-in circuit receiver units discreetly located into the ceiling, or under furniture when used with portable lighting. The receivers can be mounted inline, which enables table lamps, uplighters and other lighting outputs to be incorporated into the complete lighting solution.

Total control at your fingertips At the push of a button, the light levels can be controlled to meet the desired ambience.The wall controllers have a choice of interchangeable front plates, and fully complement Schneider Electric’s Ultimate range, with the ability to be mounted to any surface and require no wiring, making installation simple and straightforward

Simplicity at its bestSphere requires no complicated software or specialist installation, which means programming couldn’t be simpler

A world of possibilitiesThere is no limit to the number of receivers that can be installed in each property, so every room could potentially be controlled individually.Receivers can operate up to 30 metres away from the controller, offering flexibility for the homeowner.

94

SphereLighting control & automation

Controllers

GSWWC5

n Dimensions of wall controllers: 88 x 88mmn Minimum mounting depth (wall controller): 16mmn Fix screws: M3.5 x 25mm & 30mmn Pattress box supplied for surface mounting all wall controllersn Wireless transmission up to 30m (subject to conditions)n Battery operation for maximum life (CR 2032)n Controllers are suitable for use as standalone devices or as mastering units for whole house controln 433 MHz radio frequencyn EN 60950-2000n Wall controller is supplied with Stainless Steel front plate. Other front plates are available to ordern Hand controller can easily be reconfigured as a master controllern All handheld controllers are supplied with Stainless Steel front plates and wall mounting brackets


GSWWC5 5 Channel wall controller 1

GSWWC8 8 Channel wall controller 1

GSWHC5 5 Channel hand held controller 1

GSWHC8 8 Channel hand held controller 1

GSW2GFP8BN

Replacement wall controller face plates n 1 gang face plates - dimensions: 88 x 88mmn 2 gang face plates - dimensions: 88 x 148mmn For use when fitting a wall controller in place of an existing 2 gang flush mounting boxn 2 gang face plates are supplied with new mounting grid


GSW1GFP5** 5 Channel 1 gang face plate 1




GSWWDRFP** Wall dimmable receiver face plate 1

Note: Replace ** with suffix code to denote cover plate finish:PB Polished Brass PC Polished ChromeSS Stainless Steel BN Black Nickel

95

Receivers

GSWWDR30

GSW10VFLDR

GSWCDR35

GSWFDR35

n For use with a wide range of lights and control equipmentn Relay receivers suitable for fluorescent lighting loads, LED lighting loads, as well as a wide range of other

equipment, e.g. extractor fans etcn Ceiling receiver designed for use with LV halogen, mains halogen and incandescent loadsn Colour coded terminalsn BS EN 60669-2-1-2000n Mains operationn Loads: - Dimmable receiver - 350VA (20W/VA min. load) - Relay receiver - 5A (2A motor load) - Wall dimmable receiver - 300W/VA (50VA/60W min load) - Fluorescent dimmable receiver - 1-10V controln Wall dimmable receiver is supplied with a Stainless Steel frontplate. Other frontplates are available to order


GSWWDR30 Wall dimmable receiver - 300W/VA* 1

GSWFDR35 Floor dimmable receiver - 350VA 1

GSWCDR35 Ceiling dimmable receiver - 350VA 1

GSWCRR5A Ceiling relay receiver - 5A 1

GSW10VFLDR Ceiling fluorescent dimmable receiver - 1-10V 1

* Minimum mounting depth 25mm two wire connection

SphereLighting control & automation

96

With its ultra-clean lines, sleekly chic square profile, the award winning ULTI is instantly identifiable

ULTI lets you set the perfect lighting. The push of a button is all it takes to activate one-touch scene control and recalls your favourite pre-programmed combination of lights and light intensity. Expandable, easy to upgrade and to programme, ever adaptable ULTI redefines the art of fine lighting.

Redefining Lighting

97

ULTIRF boundless communicationsAs all ULTI switches incorporate patented radio frequency (RF) enabled wireless receivers, you can seamlessly integrate the operation of all automated lights within 4,000 square feet via just one remote control. Unlike conventional line-of-sight Infra Red (IR) systems, ULTI also enables you to wirelessly control your pre-programmed lighting scenes through solid walls.

A TruRetrofit lighting control Eliminating neutral wires and rewiring dramas, ULTI’s patented EZinstall Wireless Technology can be easily installed in around five minutes.

Unlike other lighting control systems, you simply remove your original switch and upgrade to an EZinstall replacement. ULTI’s true retrofitability even enables the instant automation of older buildings.

Expandable, flexibleDesigned with distributed intelligence, ULTI is astonishingly easy to upgrade. Every lighting point is controlled through an individual remote controller, thus eliminating rewiring hassles. ULTI’s expandability also gives you flexibility to add switches and dimmers to meet your needs as your space evolves.

Cover plate Control unit Power unit

Programme clear button

Programme button LED backlight

Command button

Control interfaceunit connector

LED Programme mode

98

ULTILighting control & automation

Switches

UC21SWXGL

n 100/240V n 1 gang = 2000VAn 2 gang = 2 x 1000VAn 50/60Hzn Mounting box depth: 35mmn Decor spacer should be used where existing box depth insufficient. (transparent grey)n Capacitor for specific lamp types where minimum load requirements are not met.


U201SRY2KW001 1G switch module 2000VA 240V (module only) 1

UC21SW*** 1G switch cover 1

U202SRY2KW001 2G switch module 2000VA 240V (module only) 1

UC22SW*** 2G switch cover 1

UAX004 0.47uF load capacitor 1

Dimmer switches

UC22DMXCG

n 200/240Vn 1 gang = 600VAn 2 gang = 2 x 300VAn 50/60Hzn Mounting box depth: 35mmn Decor spacer should be used where existing box depth insufficient. (transparent grey)


U201DST600001 1x600VA 240V Dimmer (Module Only) 1

UC21DM*** 1G Dimmer Cover plate 1

U202DST600001 2x300VA 240V Dimmer (Module Only) 1

UC22DM*** 2G Dimmer Cover plate 1

UAX001 Decor spacer for switches and dimmers (8 & 15mm) 1

Lamp dimmern 13A socket with clip on remoten 200/240Vn 50/60 Hz


U101DFR400XBL1 400W lamp dimmer set with remote control 1

Note Replace *** with suffix code to denote cover plate finish:XPW Pearl white XGL Crystal glassXCG Champagne gold XBS Brushed silver

99

Note Replace *** with suffix code to denote cover plate finish:XPW Pearl white XGL Crystal glassXCG Champagne gold XBS Brushed silver

ULTILighting control & automation

Freelocate switches, remote & repeatern 100m range (subject to conditions, see technical pages).


U105RHH001BPW1 5 key hand held remote 1 control Pearl White 1

U106RWM001XBS1

n Freelocate supplied as complete item n 100m range (subject to conditions, see technical pages)


U102RWM001***1 2 key 2 scene Freelocate switch 1

U106RWM001***1 6 key 5 scene Freelocate switch 1

UAX003 Black lockable bracket 1

n Built in RF receiver and transmitter extends RF signal coverage of remote units and Freelocate switchesn BS 13A socketn 220/240V


U10XARR001210 RF Repeater pearl white 1

Socket outlets

UCT25XGL

n LED outlets are supplied with amber or blue illumination on the push switch mechanism to co-ordinate with the selectable blue or amber backlight on ULTI switches and dimmers

Part number Description QtyUS15A00 1G 13A switched socket amber LED (module only) 1

US15B00 1G 13A switched socket blue LED (module only) 1

UC15*** 1G socket cover 1

UST25A00 2G 13A switched socket amber LED (module only) 1

UST25B00 2G 13A switched socket blue LED (module only) 1

UCT25*** 2G socket cover 1

US155000 1G 5A switched socket amber LED (module only) 1

US155XGL 1G 5A socket cover crystal glass 1

U201SPMDPB00 1G 16A DP switch amber/blue LED (module only) 1

UC21DPPXGL 1G 16A switch cover crystal glass 1

Communication outlets

UC31TVXGL

UC32TDXGL

n RJ45 CAT 6

Part number Description QtyUS31RJ000 1G RJ45 socket (module only) 1

UC31RJ*** 1G RJ45 cover plate 1

US32TD000 2G RJ45 socket (module only) 1

UC32TD*** 2G RJ45 cover plate 1

US31TV000 TV outlet (module only) 1

UC31TV*** TV outlet cover plate 1

100

Flexibility in the home

101

LexCom PerformanceThe flexible multimedia choiceLexCom Performance is a good choice if you have an active interest in modern home technology and computers. You will get a network solution with a great capacity and multimedia access from all outlets thanks to the Triple play device.

Fast to install and easy to expandLexCom Performance makes the installation easy and fast. Just put the central core unit with its 8 outgoing links, somewhere in the home. From there, a single cable carries the three separate signals for TV, phone and data to every outlet in every room.

Plug & Triple play With a Triple Play Splitter, all outlets can be turned into a Multimedia hub. Just plug the Splitter in and the outlet can be used for phone, broadband or TV. This will make digital boxes, extension cords and cross connections obsolete. It is truly a flexible connectivity, eliminating inconveniences and creating more freedom.

102

LexCom Performance Lighting control & automation

Core systemDistribution of voice, data & image signalsn 2 RJ11 telephone linesn 8 data ports RJ45 STPn Gain forward -5/ +15dBn Tilt (equaliser): +/- 6dbn Input voltage 12 Vdcn Dimension: 300 x 250 x 90 mmn Weight: 500g


VDIR528010 Active central processing unit 1

CableLexCom Performance installation cable, S/STPn 4 twisted pairs individually shielded S/STPn White outer jacket (RAL 9010), LSFROHn International colour coding


VDIR534810 Cable white box – 120m 1

VDIR534830 Cable white drum – 300m 1

Outlet connectorRJ45 jack for LexCom Performance terminal outletsn Screened wide band connector STPn Does not require tool for wiringn International colour coding


VDI552012 LexCom Performance STP connector 1

Part number Description QtyGU8450** Ultimate screwless 1 module Euro plate

Dimensions: 88 x 88mm (1 module)1

GU8250** Ultimate flat plate 1 module Euro plateDimensions: 88 x 88mm (1 module)

1

GU8550** Ultimate low profile 1 module Euro plateDimensions: 88 x 88mm (1 module)

1

GU8050 Ultimate moulded 1 module Euro plate Dimensions: 86 x 86mm (1 module)

1

GEURO1 Exclusive moulded 1 module Euro plate Dimensions: 86 x 86mm (1 module)

1

To order a complete unit requires:n LexCom Performance connectorn Outlet modulen Euro plate

Part number Description QtyGUE7091* LexCom Performance data outlet module 8

Triple playEnables all 3 services to be used simultaneously from one outlet n 1 in RJ45 3 out RJ45 (supplied with 3m input cord)n Flame retardant PVC black cablen Balun in the RJ45 plug


VDIR593001 Triple play splitter 1

VDIR647402 Triple play input cord 0.5m 1

Note Replace * with suffix code to denote colour required:W White B Black

Note Replace ** with suffix code to denote plate finish required:SS Stainless steel PN Pearl nickel PC Polished chromePW Painted White PB Polished brass BN Black nickel

103

LexCom Performance networking system


Dedicated cords and accessoriesConnection cord between the wall outlet and the TV or Radio equipmentn Mixed cord TV/R IEC (male) / RJ45 with superior shielding constructionn Flame retardant PVC black cablen Balun in the RJ45 plugn Female IEC adapter included for Radion Provided in 3 meter length


VDIR643003 TV/Radio cord 1

Connection and patch cord for data applicationn 2 pairs straight wiringn RJ45 to RJ45 screened cordn PVC grey cablen Overmoulded RJ45 plug


VDIR547402 Data cord, 0.5m 1

VDIR547403 Data cord, 1m 1




Stacking cord to daisy chain two LexCom Performance unitsn Mixed cord RJ11 / RJ45 unscreenedn PVC black cablen Overmoulded RJ45 plugn Provided in 1 meter length


VDIR542111 Stacking cord 1

VDIR580021 Cable jacket stripper 1

The tool kit provides a small range of tools especially adapted, it includes:-n 1 cable jacket strippern 1 LSA punch down tooln 1 flat screw driver for gain adjustn 1 cross screw driver for overall mountingn 1 wrench key for F-conn


VDIR580020 Tool kit 1

A test system to verify the installation work and to enable correct configuration of the installationn Allows the 8 links to be testedn Tests the wire map (continuity and shorts)n Tests cable link length adjustments for TV output leveln Powered by LexCom Performance core unit


VDIR580010 Test kit 1

104

Meeting installation requirements

105

Schneider Electric provide a comprehensive range of wiring accessories that guarantee quality, flexibility, safety and performance with the practical features that save the installer time and energy.

Wiring Accessories

Ultimate rangeSlimline white moulded . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107-121

Part M solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122-133

Screwless flat plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132-149

Flat plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150-167

Low Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168-181

Exclusive rangeSquare edge white moulded. . . . . . . . . . . . . . . . . . . . . . . . .183-188

Decorative . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189-192

Metal clad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193-200

T2 ceiling accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201-207

Energy efficiency Occupancy sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208-211

High impact resistant E-Series polycarbonate . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212-219

WeatherproofIP55 & IP66. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220-224

Kavacha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225-226

Industrial switchgear56 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227-232

Technical information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .249-257

106

Ultimate range

The stylish, modern alternative

107

Ultimate slimline white moulded wiring accessories offer a stylish, modern alternative.

Aesthetically pleasing and ultra-slim, these sleek fittings make for ease of installation with their subtle curved profile and minimum back projections.

The range, which includes euromodular and grid variants, was designed to complement the Ultimate screwless and flat plate ranges for situations where a combination of fittings may be required.

Ultimate slimline white moulded

Features & benefits:

Consumer

An ultra-slim plate for minimum projection when flush fitted Curved rockers with tactile switch action Slim-line, compact neons for a less obtrusive look Screw cap covers provide a sleek finishing touch

Installer

Minimal back projection for both new and retrofits (switches 16mm, sockets 25mm) Unique integral locking facility on isolator for added safety Fully rated switches at 16AX for fluorescent and inductive loads Colour coded in-line terminals make selection even easier Double pole options on 1-gang and 2-gang switched sockets (twin-earth terminals on 2 gang sockets) All fuse carriers are lockable to prevent accidents during maintenance Plated earth straps assist longevity for a corrosion free life

108

Colors Mountingboxdepth

White Red Grey

13A socket‑outlet

1G unswitched GU3050 25/35mm

2G unswitched GU3060 GU3060RD 25/35mm

1G switched GU3010 25/35mm

1G switched with neon GU3011 25/35mm


2G switched with neons GU3021 25/35mm

1G DP switched GU3010D GU3010DRD GU3010DGY 25/35mm

2G DP switched GU3020D 25/35mm

13A DP outboard rocker switched socket‑outlet

2G DP switched GU3030 GU3030RD GU3030GY 25/35mm

2G switched with clean earth GU3031 25/35mm

2G switched red with rockers, clean earth and neons GU3032 25/35mm

2G switched with clean earth and non standard GU3033 25/35mm

2G switched with red rockers, clean earth, non standard and neons GU3034 25/35mm

Round pinsocket‑outlet

2A unswitched GU3070 25mm


15A switched GU3090 25mm

15A switched with neon GU3091 25mm

16AX plate switches

1G 1 way GU1011 16mm

1G 2 way GU1012 GU1012GY 16mm

1G 16A 2 way retractive* GU1012R 16mm

1G 16A 2 way retractive marked press* GU1012RP 16mm

1G 16A 2 way retractive marked with bell symbol** GU1012RB 16mm





10A 3 pole isolator* GU1013 25mm

1G intermediate* GU1014 GU1014GY 25mm

16AX wide rocker switches

1G 2 way GRWH1012 GRWH1012GY 25mm


3G 2 way GRWH1032A GRWH1032GY 25mm

1G 10AX intermediate* GRWH1014 GRWH1014GY 25mm

10AX architrave switches

1G 2 way architrave GU1012A 16mm


Mains dimmer switches

1G 1 way 400 W rotary GU6011 16mm

1G 2 way 400 W push GU6012 25mm




Low voltage dimmer switches

1G 1 way 400 VA rotary GU6011LV 16mm

1G 2 way 400 VA push GU6012LV 25mm




Ultimate slimline white moulded Selection table

Wiring accessories

109


White Red Grey

13A socket‑outlet

1G unswitched GU3050 25/35mm

2G unswitched GU3060 GU3060RD 25/35mm


1G switched with neon GU3011 25/35mm


2G switched with neons GU3021 25/35mm

1G DP switched GU3010D GU3010DRD GU3010DGY 25/35mm

2G DP switched GU3020D 25/35mm

13A DP outboard rocker switched socket‑outlet

2G DP switched GU3030 GU3030RD GU3030GY 25/35mm

2G switched with clean earth GU3031 25/35mm

2G switched red with rockers, clean earth and neons GU3032 25/35mm

2G switched with clean earth and non standard GU3033 25/35mm

2G switched with red rockers, clean earth, non standard and neons GU3034 25/35mm

Round pinsocket‑outlet



15A switched GU3090 25mm

15A switched with neon GU3091 25mm

16AX plate switches



1G 16A 2 way retractive* GU1012R 16mm

1G 16A 2 way retractive marked press* GU1012RP 16mm

1G 16A 2 way retractive marked with bell symbol** GU1012RB 16mm





10A 3 pole isolator* GU1013 25mm

1G intermediate* GU1014 GU1014GY 25mm




3G 2 way GRWH1032A GRWH1032GY 25mm

1G 10AX intermediate* GRWH1014 GRWH1014GY 25mm





1G 1 way 400 W rotary GU6011 16mm






1G 1 way 400 VA rotary GU6011LV 16mm






White Red Grey

20AX & 32A DP switches and flex outlet plates

1G 20A DP GU2010 25mm

1G 20A DP with neon GU2011 25mm

1G 20A DP with flex outlet GU2013 25mm

1G 20A DP with neonAnd flex outlet GU2014 25mm

1G 20A DP with flex outletAnd neon marked water heater GU2014WH 25mm

1G 32A DP switch with neon GU4031 35mm

25A side entry flex outlet plate GU2033 25mm

20A front entry flex outlet plate GU2003 25mm

13A fused connection units

13A unswitched GU5000 GU5000RD 25mm

13A unswitched with neon GU5001 25mm

13A unswitched with flex outlet GU5003 25mm

13A unswitched with neon & flex outlet GU5004 25mm


3A unswitched with flex outlet GU50033 25mm

13A DP switched GU5010 GU5010GY 25mm

13A DP switched with neon GU5011 GU5011GY 25mm

13A DP switched with flex outlet GU5013 25mm

13A DP switched with neon & flex outlet GU5014 25mm

45A DP switches

1G 45A DP GU4010 47mm


2G 45A DP GU4020 47mm


45A DP cooker control units

45A DP cooker control unit & 13A switched socket-outlet GU4000 47mm

45A DP cooker control unit & 13A switched socket-outlet with neons GU4001 47mm

Cooker connection unit GU4050 47mm

Shaver socket outlet

115 / 230V dual voltage shaver socket-outlet GU7090 47mm

Telephone outlets

Single G RJ11 outlet GU7051 25mm

Single G telephone master GU7061 25mm

Single G telephone secondary GU7062 25mm

Data outlets Single G RJ45 outlet GU7071 25mm

Twin G RJ45 outlet GU7072 25mm

Quad RJ45 outlet GU7074 35mm

TV outlets Single G tv/fm co-axial GU7010 25mm

Twin G tv/fm co-axial GU7020 25mm

Single G satellite GU7030 25mm

Twin G satellite/co-axial GU7040 25mm

Screened TV outlets Single G diplex TV/FM GU7021 35mm

Single G triplex TV/FM/SAT GU7081 35mm

Blank plates & replacement screw capped covers

1G blank plate GU8010

2G blank plate GU8020

Moulded screw capped covers GUMSCO

110

Ultimate slimline white moulded Grid front plate selection table

Wiring accessories

Fit installation box and mounting grid. Pull through cables, cut and strip to length.

Terminate each cable to the appropriate switch, (clear terminal markings).

Once wired the modules, simply but securely clip into the mounting grid.

Finally after decorating, fit the cover plate.

Front plates are available in a choice of 11 finishes - Polished Brass, Mirror Steel, Stainless Steel, Pearl Nickel, Black Nickel, Brushed Chrome, White Metal, White Moulded, Metal Clad Grey and Silver.

1 2 3 4 6 8 9 12 18 24

FlushMoulded White GUG01G GUG02G GUG03G GUG04G GUG06G GUG08G GUG09G GUG12G GUG18G GUG24G

Part M Grey front plates GUG01GGY GUG02GGY GUG03GGY GUG04GGY

Dimensions 88 x 88mm 88 x 88mm 88 x 148mm 88 x 148mm 156 x 156mm 156 x 156mm 216 x 156mm 216 x 156mm 398 x 156mm 398 x 156mm

Flush mounting boxes

GBG01 GBG01 GBG02 GBG02 GBG03 GBG03 GBG04F GBG04F GBG06F GBG06F

Dimensions 76 x 76 42mm

76 x 7642mm

136 x 76 42mm

136 x 76 42mm

136 x 136 42mm

136 x 136 42mm

193 x 133 42mm

193 x 133 42mm

374 x 133 42mm

374 x 133 42mm

111

Ultimate slimline white mouldedWiring accessories

Description Code6AX & 10AX modules white moulded

6AX 2 way retractive and centre off switch module GUG202OCW

10AX 1 way switch module GUG101W


10AX 2 way retractive switch module GUG102RW

10AX intermediate switch module GUG10IW

20AX modules white moulded



20AX 2 way on and off module GUG2020W

20AX DP switch module GUG20DPW

20AX printedmodules white moulded

20AX DP switch module marked microwave GUG20DPMWW

20AX DP switch module marked cooker hood GUG20DPCHW

20AX DP switch module marked dishwasher GUG20DPDWW

20AX DP switch module marked freezer GUG20DPFZW

20AX DP switch module marked washing machine GUG20DPWMW

20AX DP switch module marked tumble dryer GUG20DPTDW

20AX DP switch module marked heater GUG20DPHTW

20AX DP switch module marked hob GUG20DPHOW

20AX DP switch module marked oven GUG20DPOVW

20AX DP switch module marked boiler GUG20DPBOW

20AX DP switch module marked waste disposal GUG20DPWDW

20AX DP switch module marked extractor fan GUG20DPEFW

20AX DP switch module marked fan GUG20DPFAW

20AX DP switch module marked fridge freezer GUG20DPFFZW

20AX DP switch module marked fridge GUG20DPFRW

20AX DP switch module marked washer/dryer GUG20DPWDYW

20AX secret key modules painted white

20AX DP key switch module GUG20DPKWPW

20AX DP key switch module marked EMG.LTG GUG20DPKELWPW

20AX 2 way key switch module GUG202KWPW

20AX 2 way key switch module marked EMG.LTG GUG202KELWPW

Communication modules painted white

Master telephone outlet GUGTELMWPW

Secondary telephone outlet GUGTELSWPW

Single RJ11 data outlet GUGRJ11WPW


Single TV/FM coaxial GUGCOWPW

Single satellite GUGSATWPW

13A fused connection unit module GUG13FCUWPW

Flexible outlet (10mm diameter) GUG16COWPW

Blank modules White blank module GUGBW

Indicator modules Red neon indicator module GUGINDWR

Orange neon indicator module GUGINDWO

Green neon indicator module GUGINDWG

Spares Hex screws (plate to grid) moulded UHEXSPW

Hex screw key GUGSHK

Key switch module spare key GUGKSK

Additional Earth terminal GGTKIT

112

Ultimate slimline white mouldedPainted white grid modules

Wiring accessories

Finishes

Painted white

Choose module + cap to create following module

Module

10AX & 20AX switch component modules

10AX 1 way SP GUG101MW GUGRPW


10AX intermediate SP GUG10IMW GUGRPW


20AX 2 way and off SP GUG2020MW GUGRPW


20AX DP GUG20DPMW GUGRPW


Module

20AX DP printed switch component modules

Marked boiler GUG20DPMW GUGRBOPW

Marked cooker hood GUG20DPMW GUGRCHPW

Marked dish washer GUG20DPMW GUGRDWPW

Marked extractor fan GUG20DPMW GUGREFPW

Marked fridge GUG20DPMW GUGRFRPW

Marked fan GUG20DPMW GUGRFAPW

Marked freezer GUG20DPMW GUGRFZPW

Marked fridge/freezer GUG20DPMW GUGRFRFZPW

Marked hob GUG20DPMW GUGRHOPW

Marked heater GUG20DPMW GUGRHEPW

Marked microwave GUG20DPMW GUGRMWPW

Marked oven GUG20DPMW GUGROVPW

Marked tumble dryer GUG20DPMW GUGRTDPW

Marked washer dryer GUG20DPMW GUGRWDYPW

Marked waste disposal GUG20DPMW GUGRWDPW

Marked washing machine GUG20DPMW GUGRWMPW

6AX & 10AX modules

6AX 2 way retractive and centre off switch module GUG202OCWPW

10AX 2 way retractive switch module GUG102RWPW

10AX 2 way toggle switch module GUG102TWPW

10AX intermediate toggle switch module GUG10ITWPW

20AX secret keymodules




Communication modules Master telephone outlet GUGTELMWPW






Electronic dimmer Electronic 300W/VA 2 way & multiway standard dimmer module GUGEMDIMWPW16

Electronic 300W/VA infra red dimmer module GUGEMRDIMW16

2 way retractive switch GUGEMWWPW16

1 channel remote control GU6000RC116

Connection unit & flex outlet


Flex outlet (10mm dia) GUG16COWPW

Blank modules Blank module metal finish GUGBWPW

Blank module plastic GUGWB




Spares

Hex screws (plate to grid) UHEXSPW




113


13A unswitched socket outlets

GU3050

n Dimensions: 86 x 86mm (1 gang), 86 x 146mm (2 gang)n Mounting box: - SB251 (F) GU9125 (S) – 1 gang - SB351 (F) GU9135 (S) – 1 gang - SB252 (F) GU9225 (S) – 2 gang - SB352 (F) GU9235 (S) – 2 gangn Fix screws: M3.5 x 30mmn BS 1363


GU3050 1 gang unswitched 10

GU3060 2 gang unswitched 5

13A SP switched socket outlets

GU3021

n Dimensions: 86 x 86mm (1 gang), 86 x 146mm (2 gang)n Mounting box: - SB251 (F) GU9125 (S) – 1 gang - SB351 (F) GU9135 (S) – 1 gang - SB252 (F) GU9225 (S) – 2 gang (limited cable access) - SB352 (F) GU9235 (S) – 2 gangn Fix screws: M3.5 x 30mmn BS 1363

Part number Description QtyGU3010 1 gang switched 10

GU3011 1 gang switched with neon 10

GU3020 2 gang switched 5

GU3021 2 gang switched with neons 5

13A DP switched socket outlets

GU3010D

n Dimensions: 86 x 86mm (1 gang), 86 x 146mm (2 gang)n Mounting box: - SB251 (F) GU9125 (S) – 1 gang - SB351 (F) GU9135 (S) – 1 gang - SB252 (F) GU9225 (S) – 2 gang (limited cable access) - SB352 (F) GU9235 (S) – 2 gangn Fix screws: M3.5 x 30mmn BS 1363

Part number Description QtyGU3010D 1 gang DP switched 10

GU3020D 2 gang DP switched 5

13A DP outboard rocker switched socket outlets

GU3030

n Dimensions: 86 x 146mm (2 gang)n Mounting box: - SB252 (F) GU9225 (S) – 2 gang (limited cable access) - SB352 (F) GU9235 (S) – 2 gangn Fix screws: M3.5 x 30mmn BS 1363 (where applicable)

Part number Description QtyGU3030 2 gang switched 5

GU3031 2 gang switched with clean earth 5

GU3032 2 gang switched red with rockers, clean earth and neons 5

GU3033 2 gang switched with clean earth and non standard 5

GU3034 2 gang switched with red rockers, clean earth, non standard and neons 5

Turn to page 29 to view our full range of Part M solutions.

Note All 2 gang sockets include twin earth terminals as standard, enabling high integrity earthing. To aid flush installation 35mm steel boxes are recommended.

114


Round pin socket outlets

GU3080

n Dimensions: 86 x 86mmn Mounting box: - SB251 (F) GU9125 (S) – 1 gangn Fix screws: M3.5 x 30mmn BS 546


GU3070 2A unswitched 10


GU3090 15A switched 10

GU3091 15A switched with neon 10

16AX plate switches

GU1012

GU1013

n Dimensions: 86 x 86mm (1-3 gang), 86 x 146mm (4-6 gang)n Mounting box: - SB161 (F) GU9116 (S) 1-2 gang - SB251 (F) GU9125 (S) 3 gang - SB252 (F) GU9225 (S) 4-6 gangn Fix screws: M3.5 x 18mmn BS EN 60669-1n BS EN 60947-3 (GU1013)


GU1011 1 gang 1 way 10


GU1012R *1 gang 2 way retractive 10

GU1012RP *1 gang 2 way retractive marked press 10

GU1012RB *1 gang 2 way retractive marked with bell symbol 10





GU1013 **3 pole isolator 10

GU1014 **1 gang intermediate 10


GRWH1012

n Dimensions: 87 x 87mmn Mounting box: - SB251 (F) GU9125 (S)n Fix screws: M3.5 x 25mmn * 10AX rated onlyn BS EN 60669-1


GRWH1012 16AX 1 gang 2 way 10

GRWH1022 16AX 2 gang 2 way 10

GRWH1032A 16AX 3 gang 2 way 10

GRWH1014 10AX 1 gang intermediate 10


GU1012A

n Dimensions: 33 x 86mm (1 gang), 33 x 148mm (2 gang)n Mounting box: - SBA251A (F) GPAT1G16A (S) 1 gang - SBA252A (F) GPAT2G16A (S) 2 gangn Fix screws: M3.5 x 18mmn BS EN 60669-1


GU1012A 1 gang 2 way architrave 10

GU1022A 2 gang 2 way architrave 10

* 16A rated** 10A rated

115



GU6032

n Dimensions: 86 x 86mm (1-2 gang), 86 x 146mm (3-4 gang)n Mounting box: - SB161 (F) GU9116 (S) 1-2 gang - SB252 (F) GU9225 (S) 3-4 gangn Fix screws: M3.5 x 30mm n BS EN 60669-2-1


GU6011 1 gang 1 way 400W rotary 1

GU6012 1 gang 2 way 400W push 1





GU6022LV

n Dimensions: 86 x 86mm (1-2 gang), 86 x 146mm (3-4 gang)n Mounting box: - SB161 (F) GU9116 (S) 1-2 gang - SB252 (F) GU9225 (S) 3-4 gangn Fix screws: M3.5 x 30mmn BS EN 60669-2-1


GU6011LV 1 gang 1 way 400VA rotary 1

GU6012LV 1 gang 2 way 400VA push 1




20AX & 32A DP switches and flex outlet plates

GU2014WH

n Dimensions: 86 x 86mmn Mounting box: - SB251 (F) GU9125 (S)n Fix screws: M3.5 x 30mmn BS EN 60669-1


GU2010 20A DP 10

GU2011 20A DP with neon 10

GU2013 20A DP with flex outlet 10

GU2014 20A DP with neon and flex outlet 10

GU2014WH 20A DP with flex outlet and neon marked water heater 10

GU4031 32A 1 gang DP switch with neon 10

GU2003

n BS 5733


GU2033 25A side entry flex outlet plate 10

GU2003 20A front entry flex outlet plate 10

* 1 way dimmers can be used to replace standard wall switches and retrofit into 16mm mounting box.

Note: Mains dimmer switches are not suitable on low voltage circuits. See technical section. 1 and 2 gang 2 way dimmer switches include spacing frame for mounting in plaster depth 16mm boxes.

116


13A unswitched fused connection units

GU5000

n Dimensions: 86 x 86mmn Mounting box: - SB251 (F) GU9125 (S)n Fix screws: M3.5 x 30mmn BS 1363



GU5001 13A unswitched with neon 10

GU5003 13A unswitched with flex outlet 10

GU5004 13A unswitched with neon & flex outlet 10


GU50033 3A unswitched with flex outlet 10

13A switched fused connection units

GU5014

n Dimensions: 86 x 86mmn Mounting box: - SB251 (F) GU9125 (S)n Fix screws: M3.5 x 30mmn BS 1363


GU5010 13A DP switched 10

GU5011 13A DP switched with neon 10

GU5013 13A DP switched with flex outlet 10

GU5014 13A DP switched with neon & flex outlet 10

Ultimate engraved range20A DP Control switch 13A Fused connection unit

DP switch DP with neon DP with flex outlet

DP with flex outlet & neon

Unswitched Switched Switched with neon

Air conditioner GU2013AC GU2014AC

Boiler GU5010BO GU5011BO

Cooker hood GU5010CH GU5011CH

Dish washer GU5010DW GU5011DW

Extractor fan GU5010EF GU5011EF

Fan GU5010FA GU5011FA

Freezer GU5010FZ GU5011FZ

Fridge GU5010FR GU5011FR

Fridge/freezer GU5010FFZ GU5011FFZ

Hob GU5010HO GU5011HO

Heater GU2010HT GU2011HT GU2013HT GU2014HT GU5000HT GU5010HT GU5011HT

Microwave GU5000MW GU5010MW GU5011MW

Oven GU2010OV GU2011OV

Security GU5000SS

Towel rail GU2011TR GU2013TR GU5000TR

GU5003TR*

Tumble dryer GU5000TD GU5010TD GU5011TD

Waste disposal GU5000WD GU5010WD GU5011WD

Washing machine GU5010WM GU5011WM

* GU5003TR includes flex outlet

117


45A DP switches

GU4011

GU4021

n Dimensions: 86 x 86mm (1 gang), 146 x 86mm (2 gang)n Mounting box: - SB471 (F) GU9147 (S) - SB472 (F) GU9247 (S)n Fix screws: M3.5 x 30mmn BS EN 60669-1


GU4010 45A 1 gang DP 10

GU4011 45A 1 gang DP with neon 10

GU4020 45A 2 gang DP 5

GU4021 45A 2 gang DP with neon 5

45A DP cooker control units

GU4001

n Dimensions: 86 x 86mm (1 gang), 86 x 146mm (2 gang)n Mounting box: - SB471 (F) GU9147 (S) 1 gang - SB472 (F) GU9247 (S) 2 gangn Fix screws: M3.5 x 30mmn BS 4177


GU4000 45A DP cooker control unit & 13A switched socket 5

GU4001 45A DP cooker control unit & 13A switched socket with neons 5

GU4050 Cooker connection unit 10

Shaver socket

GU7090

n Dimensions: 146 x 86mmn Mounting box: - SB472 (F) GU9247 (S)n Fix screws: M3.5 x 30mmn BS EN 61558-2-5


GU7090 115/230V dual voltage shaver socket 1

Telephone outlets

GU7062

n Dimensions: 86 x 86mmn Mounting box: - SB251 (F) GU9125 (S)n Fix screws: M3.5 x 30mmn BS EN 41003


GU7051 Single gang RJ11 outlet 10

GU7061 Single gang telephone master 10

GU7062 Single gang telephone secondary 10

118


Data outlets

GU7071

n Dimensions: 86 x 86mmn Mounting box: - SB251 (F) GU9125 (S) single/twin - SB352 (F) GU9235 (S) quadn Fix screws: M3.5 x 30mmn CAT5en BS EN 41003


GU7071 Single gang RJ45 outlet 10

GU7072 Twin gang RJ45 outlet 10

GU7074 Quad RJ45 outlet 5

TV outlets

GU7030

n Dimensions: 86 x 86mmn Mounting box: - SB251 (F) GU9125 (S)n Fix screws: M3.5 x 30mmn BS 3041 (where applicable)


GU7010 Single gang tv/fm co-axial 10

GU7020 Twin gang tv/fm co-axial 10

GU7030 Single gang satellite 10

GU7040 Twin gang satellite/co-axial 5

Screened TV outlets

GU7081

n Dimensions: 86 x 86mmn Mounting box: - SB251 (F) GU9125 (S)n Fix screws: M3.5 x 30mmn BS 3041 (where applicable)


GU7021 Single gang diplex TV/FM 10

GU7081 Single gang triplex TV/FM/SAT 10

Blank plates & replacement screw capped covers

GU8010

n Dimensions: 86 x 86mm (1 gang), 86 x 146mm (2 gang)n Fix screws: M3.5 x 30mmn BS 5733


GU8010 1 gang blank plate 10

GU8020 2 gang blank plate 10

GUMSCO Moulded screw capped covers 100

GUG03G

Grid platesPart number Description Dimensions QtyGUG01G 1 gang 88 x 88mm 1

GUG02G 2 gang 88 x 88mm 1






GUG12G 12 gang 216 x 156mm 1

GUG18G 18 gang 398 x 156mm 1

GUG24G 24 gang 398 x 156mm 1

119


Surface pattresses

GU9116

n BS 5733n All supplied complete with earth terminals


GU9116 1 gang 16mm 10

GU9125 1 gang 25mm 10

GU9225 2 gang 25mm 5

GU9D25 Dual 25mm 5

GU9135 1 gang 35mm 10


GU9147 1 gang 47mm 10


GPAT1G16A 1 gang 16mm architrave 10

GPAT2G16A 2 gang 16mm architrave 10

Euro modular plates

GU8080

n Dimensions: 86 x 86mm (1-2 module), 86 x 146mm (4 module) n Refer to module for appropriate mounting box depth


GU8050 1 module 10

GU8060 2 module 10

GU8080 4 module 5

Euro modular plates

GUE7030W

GUE7010W

GUE7061W

n Dimensions: 25 x 50mm (single), 50 x 50mm (double)n Mounting box: - 1 module: SB251 (F) 1 gang SB252 (F) 2 gang - 2 module: SB351 (F) 1 gang SB352 (F) 2 gang

Part number Description Module size Qty

GUE7010W TV/Radio diplexer 2 1

GUE7011W Single IEC coax (female) 1 1

GUE7012W Single IEC coax (male) 1 1

GUE7030W Single F type sat 1 1

GUE7040W TV/Sat diplexer 2 1

GUE7081W TV/FM/Sat triplexer 2 1

GUE7082W TV/FM/Sat 1/Sat 2 quadplexer 2 1

GUE7020W HDMI 2 1

GUE7051W RJ11 modem 1 1

GUE7061W Telephone (BT master) 1 1

GUE7062W Telephone (BT secondary) 1 1

GUE7071W RJ45 CAT5e (not screened) 1 1

GUE7072W RJ45 CAT6 (not screened) 1 1

GUE7075W VGA 1 1

GUE7091W LexCom Performance outlet 1 8

GUE7000W 2 x Phono socket 1 1

GUE7001W 2 x Loudspeaker socket 1 1

GUE8010W Blank module 1 5

120

Ultimate slimline white moulded Wiring accessories

6AX, 10AX & 20AX switch modules ‑ white moulded

GUG101W

n 10AX & 20AX ratingsn Tactile switch actionn BS EN 60669-1


GUG202OCW 6AX 2 way retractive and centre off switch module 1

GUG101W 10AX 1 way switch module 1


GUG102RW 10AX 2 way retractive switch module 1

GUG10IW 10AX intermediate switch module 1



GUG2020W 20AX 2 way on and off module 1

GUG20DPW 20AX DP switch module 1

20AX secret key modules ‑ painted white n BS EN 60669-1

GUG20DPKELWPW


GUG20DPKWPW 20AX DP key switch module 1

GUG20DPKELWPW 20AX DP key switch module marked EMG.LTG 1

GUG202KWPW 20AX 2 way key switch module 1

GUG202KELWPW 20AX 2 way key switch module marked EMG.LTG 1

Communication modules ‑ painted white n BS EN 41003 n BS EN 3041 (where applicable)

GUGRJ45WPW


GUGTELMWPW Master telephone outlet 1

GUGTELSWPW Secondary telephone outlet 1

GUGRJ11WPW Single RJ11 data outlet 1


GUGCOWPW Single TV/FM coaxial 1

GUGSATWPW Single satellite 1

GUG13FCUWPW 13A fused connection unit module 1

GUG16COWPW Flexible outlet (10mm diameter) 1

121

Ultimate slimline white moulded Wiring accessories

Indicator modules

GUGINDWR

n 240Vn BS 5733


GUGINDWG Green indicator with white surround 1

GUGINDWO Orange Indicator with white surround 1

GUGINDWR Red indicator with white surround 1

GUGBW

Blank modulesPart number Description Qty

GUGBW White blank module 1

GUG20DPTDW

20AX DP printed modules ‑ white mouldedn Pre printed modules for greater flexibilityn BS EN 60669-1


GUG20DP**W 20AX DP switch module 1

Replace ** with the suffix code to denote the printing required:MW Microwave HT Heater WD Waste disposalCH Cooker hood WDY Washer/dryer EF Extractor fanDW Dishwasher HO Hob FA FanFZ Freezer OV Oven FFZ Fridge freezerWM Washing machine BO Boiler FR FridgeTD Tumble dryer

122

Complying with Part M

123

Part M solutions

Part M of the Buildings Regulation 2000, took effect on 1st May 2004 for England and Wales, sets out requirements and guidelines covering access to, and use of, buildings and its facilities to meet the requirement highlighted in the Disability Discrimination Act (DDA) 2005.

Practical advice on elements such as provision of wide doorways and appropriate sanitary facilities are covered by this regulation.

Part M specifically highlights the use of switches, outlets and controls, giving guidance on four main product elements:

Ease of operation Visibility Height Freedom from obstruction

Contrasting coloured rockers, to improve visibility of switches and sockets Switches with larger rockers and sockets that have wider gaps between rockers, to ease

operation Grey or red coloured bangles to improve visibility and to aid operation of lighting Engraved products to help identify electrical switches and their application Colour contrasting grid plates providing additional flexibility Grooved socket to direct the plug into the earth terminal Solutions to use with cable management Range of red devices for applications which call for equipment to identify essential or critical

supply


124

Part M solutionsWiring accessories

13A socket outlets

GU3030GY

n Dimensions: 86 x 86mm (1 gang), 86 x 146mm (1 gang)n Mounting box: - SB251 (F) 1 gang - SB351 (F) 1 gang - SB252 (F) 2 gang - SB352 (F) 2 gangn Fix screws: M3.5 x 30mmn BS 1363


GU3010DGY 1 gang DP switched - Grey 10

GU3030GY 2 gang DP switched with outboard rockers - Grey 5

GSKTSW2GV 2 gang ‘V’ grooved locator socket 5

16AX plate switches

GRWH1022GY

n Dimensions: - Standard Rocker 86 x 86mm - Wide rocker 87 x 87mmn Mounting box: - Standard rocker SB161 (F) 1-2 gang SB251 (F) 3 gang & intermediate - Wide rocker SB251 (F) GU9125 (S) n Fix screws: - Standard rocker M3.5 x 18mm - Wide rocker M3.5 x 25mmn BS EN 60669-1


GU1012GY 1 gang 2 way 10

GU1022GY **2 gang 2 way 10

GU1032GY **3 gang 2 way 10

GU1014GY ***1 gang intermediate 10

GU1012RGY *1 gang 2 way retractive 10

GRWH1012GY 1 gang 2 way wide rocker 10



GRWH1014GY ***1 gang intermediate 10

GRGYWF01 Replacement grey frame for wide rocker range 10

20AX DP switch

GU2010GY

n Dimensions: 86 x 86mmn Mounting box: - SB251 (F) GU9125 (S)n Fix screws: M3.5 x 30mmn BS EN 60669-1


GU2010GY DP switched 10

13A switched fused connection units

GU5011GY

n Dimensions: 86 x 86mmn Mounting box: SB251 (F) GU9125 (S)n Fix screws: M3.5 x 30mmn BS 1363


GU5010GY DP switched 10

GU5011GY DP switched with neon 10

* 16A rated** 10A rated*** 10AX rated

Note: All 2 gang sockets include twin earth terminals as standard, enabling high integrity earthing. To aid flush installation 35mm steel boxes are recommended.

125


Flush moulded front plates

GUG03GGY

n Supplied with mounting grids

Part number Description Dimensions Qty

GUG01GGY 1 module 88 x 88mm 1




GPULLGY

Ceiling pull cordPart number Description Qty

GPULLGY Grey 1.5m pull cord with single grey bangle 10

DDA cable management plate

DDA1BL & DDA2BL


DDA1BL 1 gang Traffic Blue 10

DDA1CH 1 gang Charcoal Grey 10

DDA2BL 2 gang Traffic Blue 10

DDA2CH 2 gang Charcoal Grey 10

Essential supply 13A socket outlets

GU3010DRD

n Dimensions: 86 x 86mm (1 gang), 86 x 146mm (1 gang) n Mounting box: - SB251 (F) 1 gang - SB351 (F) 1 gang - SB252 (F) 2 gang - SB352 (F) 2 gangn Fix screws: M3.5 x 30mmn BS 1363


GU3060RD 2 gang unswitched 5

GU3010DRD 1 gang DP switched 10

GU3030RD 2 gang DP switched with outboard rockers 5

Essential supply 13A fused connection units

GU5000RD

n Dimensions: 86 x 86mmn Mounting box: SB251 (F) GU9125 (S)n Fix screws: M3.5 x 30mmn BS 1363


GU5000RD Unswitched 10

GU5010RD DP switched 10

Essential supply ceiling pull cord

GPULLRD


GPULLRD Red 1.5m pull cord with twin red bangles 10


126

Exclusive engraved range ‑ 20A DP control switchDP switch DP with neon DP with flex outlet DP with flex outlet & neon

Air conditioner GSWDP20AFOAC GSWDPN20AFOAC

Heater GSWDP20AHT GSWDPN20AHT GSWDP20AFOHT GSWDPN20AFOHT

Oven GSWDP20AOV GSWDPN20AOV

Towel rail GSWDP20AFOTR GSWDPN20AFOTR

Exclusive engraved range ‑ 13A fused connection unitUnswitched Switched Switched with neon

Boiler GSWSPURBO GSWNSPURBO

Cooker hood GSWSPURCH GSWNSPURCH

Dishwasher GSWSPURDW GSWNSPURDW

Extractor fan GSWSPUREF GSWNSPUREF

Fan GSWSPURFA GSWNSPURFA

Freezer GSWSPURFZ GSWNSPURFZ

Fridge GSWSPURFR GSWNSPURFR

Fridge/freezer GSWSPURFFZ GSWNSPURFFZ

Hob GSWSPURHO GSWNSPURHO

Heater GSPURHT GSWSPURHT GSWNSPURHT

Microwave GSWSPURMW GSWNSPURMW

Security GSPURSS

Towel rail GSPURTR

Tumble dryer GSPURTD GSWSPURTD GSWNSPURTD

Washer dryer GSPURWDY GSWSPURWDY GSWNSPURWDY

Waste disposal GSPURWD GSWSPURWD GSWNSPURWD

Washing machine GSPURWM GSWSPURWM GSWNSPURWM


127

Ultimate engraved range ‑ 20A DP control switchDP switch DP with neon DP with flex outlet DP with flex outlet & neon

Air conditioner GU2013AC GU2014AC

Heater GU2010HT GU2011HT GU2013HT GU2014HT

Oven GU2010OV GU2011OV

Towel rail GU2011TR GU2013TR

Ultimate engraved range ‑ 13A fused connection unitUnswitched Switched Switched with neon

Boiler GU5010BO GU5011BO

Cooker hood GU5010CH GU5011CH

Dish washer GU5010DW GU5011DW

Extractor fan GU5010EF GU5011EF

Fan GU5010FA GU5011FA

Freezer GU5010FZ GU5011FZ

Fridge GU5010FR GU5011FR

Fridge/freezer GU5010FFZ GU5011FFZ

Hob GU5010HO GU5011HO

Heater GU5000HT GU5010HT GU5011HT

Microwave GU5000MW GU5010MW GU5011MW

Security GU5000SS

Towel rail GU5000TR

GU5003TR*

Tumble dryer GU5000TD GU5010TD GU5011TD

Waste disposal GU5000WD GU5010WD GU5011WD

Washing machine GU5010WM GU5011WM

* GU5003TR includes flex outlet


128



GUG101W












20AX secret key modules ‑ painted white

GUG20DPKELWPW

n BS EN 60669-1






Communication modules ‑ painted white

GUGRJ45WPW

n BS EN 41003 n BS EN 3041 (where applicable)










129


Indicator modules

GUG101W

n 240Vn BS 5733





GUG101W



GUG101W

20AX DP printed modules ‑ mouldedn Pre printed modules for greater flexibilityn BS EN 60669-1




130


Selection table

Description Code

6AX & 10AX modules white moulded






20AX modules white moulded





20AX printedmodules white moulded

















131


Selection table

Description Code

20AX secret key modules painted white





Communication modules painted white

















132

133

Ultimate screwless flat plate provides one of the most comprehensive ranges of beautifully crafted, sleek, sophisticated fittings on the market.

More choice, more style, and packed with innovative technical features for easy installation.

Ultimate screwless flat plate

Consumer

Comprehensive range from dimmer switches to data communication and all control applications Unique ‘glow in the dark’ optional mounting frame Slimline, compact neons for a subtle effect Curved, matching metal capped rockers that are aesthetically pleasing and easy to operate with a choice of white or black interior Large plate footprint avoids the need for additional decorating on retrofits

Installer

Full 16AX fluorescent rating on all plate switches Easy-fit screwless front plate simply but securely clips onto the mounting system Even with the front plate removed access to live parts is restricted Large in-line angled colour coded terminals to aid cable insertion and selection Minimal back projection to allow installation using standard flush mounting boxes for both new and retrofits Accessories supplied with both long and short screws for installation flexibility Double pole options on 1-gang and 2-gang switched sockets (Twin earth terminals on 2-gang sockets) Fully matched grid system


134

Finishes

Pianoblack

Glosswhite Transparent

Polishedbrasswhite interior

Polishedbrassblack interior

Polished chrome white interior

Polished chrome black interior

Pearl nickelwhite interior

Stainlesssteelwhite interior

Stainlesssteelblack interior

Whitemetalwhite interior

Black nickelblack interior

Mountingboxdepth

13A socket outlets

1G 13A unswitched GU3450WPB GU3450BPB GU3450WPC GU3450BPC GU3450WPN GU3450WSS GU3450BSS GU3450WPW GU3450BBN *25/35mm


1G 13A switched GU3410CLR GU3410WPB GU3410BPB GU3410WPC GU3410BPC GU3410WPN GU3410WSS GU3410BSS GU3410WPW GU3410BBN *25/35mm

1G 13A DP switched GU3410DBBK GU3410DWWH GU3410DWPB GU3410DBPB GU3410DWPC GU3410DBPC GU3410DWPN GU3410DWSS GU3410DBSS GU3410DWPW GU3410DBBN *25/35mm

1G 13A switched + neon GU3411WPB GU3411BPB GU3411WPC GU3411BPC GU3411WPN GU3411WSS GU3411BSS GU3411WPW GU3411BBN *25/35mm



2G 13A O/B DP switched + C/E GU3431WWH GU3431WPC GU3431BPC GU3431WSS GU3431BSS GU3431WPW 35mm

2G 13A O/B DP switched + C/E + N/S + Neon GU3434WPC GU3434WSS GU3434BSS 35mm


Media plate 4 socket 8 euromodule GU3420DWPCMP GU3420DWSSMP GU3420DWPWMP 40mm

Round pinsocket outlets

2A unswitched GU3470WPB GU3470BPB GU3470WPC GU3470BPC GU3470WPN GU3470WSS GU3470BSS GU3470WPW GU3470BBN 25mm

5A unswitched GU3480BBK GU3480WWH GU3480WPB GU3480BPB GU3480WPC GU3480BPC GU3480WPN GU3480WSS GU3480BSS GU3480WPW GU3480BBN 25mm

15A switched GU3490WPB GU3490BPB GU3490WPC GU3490BPC GU3490WPN GU3490WSS GU3490BSS GU3490WPW GU3490BBN 25mm

16AX plate switches

1G 2W switch GU1412BBK GU1412WWH GU1412CLR GU1412WPB GU1412BPB GU1412WPC GU1412BPC GU1412WPN GU1412WSS GU1412BSS GU1412WPW GU1412BBN 16mm


3G 2W switch GU1432CLR GU1432WPB GU1432BPB GU1432WPC GU1432BPC GU1432WPN GU1432WSS GU1432BSS GU1432WPW GU1432BBN 25mm

4G 2W switch GU1442WPB GU1442BPB GU1442WPC GU1442BPC GU1442WPN GU1442WSS GU1442BSS GU1442WPW GU1442BBN 25mm


1G TP isolator GU1413BBK GU1413WWH GU1413WPB GU1413BPB GU1413WPC GU1413BPC GU1413WPN GU1413WSS GU1413BSS GU1413WPW GU1413BBN 25mm

1G intermediate switch GU1414WPB GU1414BPB GU1414WPC GU1414BPC GU1414WPN GU1414WSS GU1414BSS GU1414WPW GU1414BBN 25mm

1G 2W retractive switch GU1412RWPB GU1412RBPB GU1412RWPC GU1412RBPC GU1412RWPN GU1412RWSS GU1412RBSS GU1412RWPW GU1412RBBN 25mm

PIR plate switch

1G 1W switch with override GUPA1411BSS

1G 1W switch GUP1411BSS

32A Keycard switch

32A Keycard switch GU1412KWPB GU1412KBPB GU1412KWPC GU1412KBPC GU1412KWPN GU1412KWSS GU1412KBSS GU1412KWPW GU1412KBBN 47mm

10AX toggle switches

1G 2W 10AX GU1412TCLR GU1412TPB GU1412TPB GU1412TPC GU1412TPC GU1412TPN GU1412TSS GU1412TSS GU1412TPW GU1412TBN 16mm


3G 2W 10AX GU1432TPB GU1432TPB GU1432TPC GU1432TPC GU1432TPN GU1432TSS GU1432TSS GU1432TPW GU1432TBN 25mm


Dimmer switches

1G 1W 400W mains GU6411PB GU6411PB GU6411PC GU6411PC GU6411PN GU6411SS GU6411SS GU6411PW GU6411BN 16mm

1G 2W 400W mains GU6412BK GU6412WH GU6412CLR GU6412PB GU6412PB GU6412PC GU6412PC GU6412PN GU6412SS GU6412SS GU6412PW GU6412BN 25mm




1G 1W 400VA low voltage GU6411LVPB GU6411LVPB GU6411LVPC GU6411LVPC GU6411LVPN GU6411LVSS GU6411LVSS GU6411LVPW GU6411LVBN 16mm





1G slimline 300VA electronic GU6412EWPB GU6412EBPB GU6412EWPC GU6412EBPC GU6412EWPN GU6412EWSS GU6412EBSS GU6412EWPW GU6412EBBN 25mm

1G slimline IR remote control 300VA electronic GU6412RWPB GU6412RBPB GU6412RWPC GU6412RBPC GU6412RWPN GU6412RWSS GU6412RBSS GU6412RWPW GU6412RBBN 25mm

2G 2 x 200W/VA electronic GU6422EWPB GU6422EBPB GU6422EWPC GU6422EBPC GU6422EWPN GU6422EWSS GU6422EBSS GU6422EWPW GU6422EBBN 25mm

1G 1000W/VA electronic GU64121WPB GU64121BPB GU64121WPC GU64121BPC GU64121WPN GU64121WSS GU64121BSS GU64121WPW GU64121BBN 47mm

1 channel remote contol GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 N/A

20A DP & 32Aplate switches

20A DP switch GU2410CLR GU2410WPB GU2410BPB GU2410WPC GU2410BPC GU2410WPN GU2410WSS GU2410BSS GU2410WPW GU2410BBN 25mm

20A DP switch + flex outlet GU2413WPB GU2413BPB GU2413WPC GU2413BPC GU2413WPN GU2413WSS GU2413BSS GU2413WPW GU2413BBN 35mm

20A DP switch + neon GU2411BBK GU2411WWH GU2411WPB GU2411BPB GU2411WPC GU2411BPC GU2411WPN GU2411WSS GU2411BSS GU2411WPW GU2411BBN 25mm

20A DP switch + neon + flex outlet GU2414WPB GU2414BPB GU2414WPC GU2414BPC GU2414WPN GU2414WSS GU2414BSS GU2414WPW GU2414BBN 35mm

20A DP switch + neon + flex outlet GU2414WHWPB GU2414WHBPB GU2414WHWPC GU2414WHBPC GU2414WHWPN GU2414WHWSS GU2414WHBSS GU2414WHWPW GU2414WHBBN 35mm

32A 1G DP switch + neon GU4431WPB GU4431BPB GU4431WPC GU4431BPC GU4431WPN GU4431WSS GU4431BSS GU4431WPW GU4431BBZ 47mm

*Dependent upon wiring configuration, to aid installation 35mm flush steel boxes are recommended. Due to large plate foot print products may not be compatible with flush dual mounting boxes

Ultimate screwless flat plate selection table

Wiring accessories

135

Finishes

Pianoblack











Mountingboxdepth

13A socket outlets








2G 13A O/B DP switched + C/E GU3431WWH GU3431WPC GU3431BPC GU3431WSS GU3431BSS GU3431WPW 35mm

2G 13A O/B DP switched + C/E + N/S + Neon GU3434WPC GU3434WSS GU3434BSS 35mm


Media plate 4 socket 8 euromodule GU3420DWPCMP GU3420DWSSMP GU3420DWPWMP 40mm

Round pinsocket outlets


5A unswitched GU3480BBK GU3480WWH GU3480WPB GU3480BPB GU3480WPC GU3480BPC GU3480WPN GU3480WSS GU3480BSS GU3480WPW GU3480BBN 25mm

15A switched GU3490WPB GU3490BPB GU3490WPC GU3490BPC GU3490WPN GU3490WSS GU3490BSS GU3490WPW GU3490BBN 25mm

16AX plate switches



3G 2W switch GU1432CLR GU1432WPB GU1432BPB GU1432WPC GU1432BPC GU1432WPN GU1432WSS GU1432BSS GU1432WPW GU1432BBN 25mm



1G TP isolator GU1413BBK GU1413WWH GU1413WPB GU1413BPB GU1413WPC GU1413BPC GU1413WPN GU1413WSS GU1413BSS GU1413WPW GU1413BBN 25mm

1G intermediate switch GU1414WPB GU1414BPB GU1414WPC GU1414BPC GU1414WPN GU1414WSS GU1414BSS GU1414WPW GU1414BBN 25mm

1G 2W retractive switch GU1412RWPB GU1412RBPB GU1412RWPC GU1412RBPC GU1412RWPN GU1412RWSS GU1412RBSS GU1412RWPW GU1412RBBN 25mm

PIR plate switch

1G 1W switch with override GUPA1411BSS

1G 1W switch GUP1411BSS

32A Keycard switch

32A Keycard switch GU1412KWPB GU1412KBPB GU1412KWPC GU1412KBPC GU1412KWPN GU1412KWSS GU1412KBSS GU1412KWPW GU1412KBBN 47mm






Dimmer switches











1G slimline 300VA electronic GU6412EWPB GU6412EBPB GU6412EWPC GU6412EBPC GU6412EWPN GU6412EWSS GU6412EBSS GU6412EWPW GU6412EBBN 25mm

1G slimline IR remote control 300VA electronic GU6412RWPB GU6412RBPB GU6412RWPC GU6412RBPC GU6412RWPN GU6412RWSS GU6412RBSS GU6412RWPW GU6412RBBN 25mm

2G 2 x 200W/VA electronic GU6422EWPB GU6422EBPB GU6422EWPC GU6422EBPC GU6422EWPN GU6422EWSS GU6422EBSS GU6422EWPW GU6422EBBN 25mm

1G 1000W/VA electronic GU64121WPB GU64121BPB GU64121WPC GU64121BPC GU64121WPN GU64121WSS GU64121BSS GU64121WPW GU64121BBN 47mm

1 channel remote contol GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 N/A

20A DP & 32Aplate switches

20A DP switch GU2410CLR GU2410WPB GU2410BPB GU2410WPC GU2410BPC GU2410WPN GU2410WSS GU2410BSS GU2410WPW GU2410BBN 25mm

20A DP switch + flex outlet GU2413WPB GU2413BPB GU2413WPC GU2413BPC GU2413WPN GU2413WSS GU2413BSS GU2413WPW GU2413BBN 35mm

20A DP switch + neon GU2411BBK GU2411WWH GU2411WPB GU2411BPB GU2411WPC GU2411BPC GU2411WPN GU2411WSS GU2411BSS GU2411WPW GU2411BBN 25mm

20A DP switch + neon + flex outlet GU2414WPB GU2414BPB GU2414WPC GU2414BPC GU2414WPN GU2414WSS GU2414BSS GU2414WPW GU2414BBN 35mm

20A DP switch + neon + flex outlet GU2414WHWPB GU2414WHBPB GU2414WHWPC GU2414WHBPC GU2414WHWPN GU2414WHWSS GU2414WHBSS GU2414WHWPW GU2414WHBBN 35mm

32A 1G DP switch + neon GU4431WPB GU4431BPB GU4431WPC GU4431BPC GU4431WPN GU4431WSS GU4431BSS GU4431WPW GU4431BBZ 47mm


136

Finishes

Pianoblack











Mountingboxdepth

13A Fused connection units


13A unswitched + flex outlet GU5403WPB GU5403BPB GU5403WPC GU5403BPC GU5403WPN GU5403WSS GU5403BSS GU5403WPW GU5403BBN 35mm

13A switched GU5410CLR GU5410WPB GU5410BPB GU5410WPC GU5410BPC GU5410WPN GU5410WSS GU5410BSS GU5410WPW GU5410BBN 35mm

13A switched + flex outlet GU5413WPB GU5413BPB GU5413WPC GU5413BPC GU5413WPN GU5413WSS GU5413BSS GU5413WPW GU5413BBN 35mm

13A switched + neon GU5411BBK GU5411WWH GU5411WPB GU5411BPB GU5411WPC GU5411BPC GU5411WPN GU5411WSS GU5411BSS GU5411WPW GU5411BBN 35mm

13A switched + neon + flex outlet GU5414WPB GU5414BPB GU5414WPC GU5414BPC GU5414WPN GU5414WSS GU5414BSS GU5414WPW GU5414BBN 35mm

45A control switches

45A 2G DP switch + neon GU4421WPB GU4421BPB GU4421WPC GU4421BPC GU4421WPN GU4421WSS GU4421BSS GU4421WPW GU4421BBN 47mm

45A cooker control units

45A DP cooker control unit + 13A switched socket + neon

GU4401BBK GU4401WWH GU4401WPB GU4401BPB GU4401WPC GU4401BPC GU4401WPN GU4401WSS GU4401BSS GU4401WPW GU4401BBN 47mm


115/230V dual voltage GU7490BBK GU7490WWH GU7490WPB GU7490BPB GU7490WPC GU7490BPC GU7490WPN GU7490WSS GU7490BSS GU7490WPW GU7490BBN 47mm

Telephone socket outlets

RJ11 telephone outlet GU7451WPB GU7451BPB GU7451WPC GU7451BPC GU7451WPN GU7451WSS GU7451BSS GU7451WPW GU7451BBN 25mm

Master telephone outlet GU7461BBK GU7461WWH GU7461WPB GU7461BPB GU7461WPC GU7461BPC GU7461WPN GU7461WSS GU7461BSS GU7461WPW GU7461BBN 25mm

Secondary telephone outlet GU7462BBK GU7462WWH GU7462CLR GU7462WPB GU7462BPB GU7462WPC GU7462BPC GU7462WPN GU7462WSS GU7462BSS GU7462WPW GU7462BBN 25mm

Single RJ45 outlet GU7471WPB GU7471BPB GU7471WPC GU7471BPC GU7471WPN GU7471WSS GU7471BSS GU7471WPW GU7471BBN 35mm

TV socket outlets

Single TV/FM coaxial socket GU7410BBK GU7410WWH GU7410CLR GU7410WPB GU7410BPB GU7410WPC GU7410BPC GU7410WPN GU7410WSS GU7410BSS GU7410WPW GU7410BBN 25mm

Twin TV/FM coaxial socket GU7420WPB GU7420BPB GU7420WPC GU7420BPC GU7420WPN GU7420WSS GU7420BSS GU7420WPW GU7420BBN 35mm

Single satellite socket GU7430WPB GU7430BPB GU7430WPC GU7430BPC GU7430WPN GU7430WSS GU7430BSS GU7430WPW GU7430BBN 25mm

Euro modular plates

1G euro plate GU8450PB GU8450PB GU8450PC GU8450PC GU8450PN GU8450SS GU8450SS GU8450PW GU8450BN **



Blank plates

1G blank plate GU8410PB GU8410PB GU8410PC GU8410PC GU8410PN GU8410SS GU8410SS GU8410PW GU8410BN N/A



Ultimate screwless flat plate selection table

Wiring accessories

137

Finishes

Pianoblack











Mountingboxdepth

13A Fused connection units


13A unswitched + flex outlet GU5403WPB GU5403BPB GU5403WPC GU5403BPC GU5403WPN GU5403WSS GU5403BSS GU5403WPW GU5403BBN 35mm

13A switched GU5410CLR GU5410WPB GU5410BPB GU5410WPC GU5410BPC GU5410WPN GU5410WSS GU5410BSS GU5410WPW GU5410BBN 35mm

13A switched + flex outlet GU5413WPB GU5413BPB GU5413WPC GU5413BPC GU5413WPN GU5413WSS GU5413BSS GU5413WPW GU5413BBN 35mm

13A switched + neon GU5411BBK GU5411WWH GU5411WPB GU5411BPB GU5411WPC GU5411BPC GU5411WPN GU5411WSS GU5411BSS GU5411WPW GU5411BBN 35mm

13A switched + neon + flex outlet GU5414WPB GU5414BPB GU5414WPC GU5414BPC GU5414WPN GU5414WSS GU5414BSS GU5414WPW GU5414BBN 35mm

45A control switches

45A 2G DP switch + neon GU4421WPB GU4421BPB GU4421WPC GU4421BPC GU4421WPN GU4421WSS GU4421BSS GU4421WPW GU4421BBN 47mm


45A DP cooker control unit + 13A switched socket + neon

GU4401BBK GU4401WWH GU4401WPB GU4401BPB GU4401WPC GU4401BPC GU4401WPN GU4401WSS GU4401BSS GU4401WPW GU4401BBN 47mm


115/230V dual voltage GU7490BBK GU7490WWH GU7490WPB GU7490BPB GU7490WPC GU7490BPC GU7490WPN GU7490WSS GU7490BSS GU7490WPW GU7490BBN 47mm

Telephone socket outlets


Master telephone outlet GU7461BBK GU7461WWH GU7461WPB GU7461BPB GU7461WPC GU7461BPC GU7461WPN GU7461WSS GU7461BSS GU7461WPW GU7461BBN 25mm

Secondary telephone outlet GU7462BBK GU7462WWH GU7462CLR GU7462WPB GU7462BPB GU7462WPC GU7462BPC GU7462WPN GU7462WSS GU7462BSS GU7462WPW GU7462BBN 25mm


TV socket outlets

Single TV/FM coaxial socket GU7410BBK GU7410WWH GU7410CLR GU7410WPB GU7410BPB GU7410WPC GU7410BPC GU7410WPN GU7410WSS GU7410BSS GU7410WPW GU7410BBN 25mm



Euro modular plates




Blank plates




138

Ultimate screwless flat plateGrid front plate selection table

Wiring accessories





Front plates are available in a choice of 6 finishes - Polished Brass, Mirror Steel, Stainless Steel, Pearl Nickel, Black Nickel, Painted White.

1 2 3 4 6 8 9 12 18 24

FlushScrewless Stainless steel GUGS01GSS GUGS02GSS GUGS03GSS GUGS04GSS GUGS06GSS GUGS08GSS GUGS09GSS GUGS12GSS GUGS18GSS GUGS24GSS

Mirror steel GUGS01GMS GUGS02GMS GUGS03GMS GUGS04GMS GUGS06GMS GUGS08GMS GUGS09GMS GUGS12GMS GUGS18GMS GUGS24GMS

Polished brass GUGS01GPB GUGS02GPB GUGS03GPB GUGS04GPB GUGS06GPB GUGS08GPB GUGS09GPB GUGS12GPB GUGS18GPB GUGS24GPB

Black nickel GUGS01GBN GUGS02GBN GUGS03GBN GUGS04GBN GUGS06GBN GUGS08GBN GUGS09GBN GUGS12GBN GUGS18GBN GUGS24GBN

Pearl nickel GUGS01GPN GUGS02GPN GUGS03GPN GUGS04GPN GUGS06GPN GUGS08GPN GUGS09GPN GUGS12GPN GUGS18GPN GUGS24GPN

White metal GUGS01GPW GUGS02GPW GUGS03GPW GUGS04GPW GUGS06GPW GUGS08GPW GUGS09GPW GUGS12GPW GUGS18GPW GUGS24GPW





76 x 7642mm

136 x 76 42mm

136 x 76 42mm

136 x 136 42mm

136 x 136 42mm

193 x 133 42mm

193 x 133 42mm

374 x 133 42mm

374 x 133 42mm

139

Ultimate screwless flat plate White interior grid modules

Wiring accessories

Finishes

Stainlesssteel

Mirrorsteel

Polishedbrass

Pearl nickel

Painted white


Module Plain rocker cap


10AX 1 way SP GUG101MW GUGRSS GUGRMS GUGRPB GUGRPN GUGRPW


10AX intermediate SP GUG10IMW GUGRSS GUGRMS GUGRPB GUGRPN GUGRPW


20AX 2 way and off SP GUG2020MW GUGRSS GUGRMS GUGRPB GUGRPN GUGRPW


20AX DP GUG20DPMW GUGRSS GUGRMS GUGRPB GUGRPN GUGRPW




Marked boiler GUG20DPMW GUGRBOSS GUGRBOMS GUGRBOPB GUGRBOPN GUGRBOPW

Marked cooker hood GUG20DPMW GUGRCHSS GUGRCHMS GUGRCHPB GUGRCHPN GUGRCHPW

Marked dish washer GUG20DPMW GUGRDWSS GUGRDWMS GUGRDWPB GUGRDWPN GUGRDWPW

Marked extractor fan GUG20DPMW GUGREFSS GUGREFMS GUGREFPB GUGREFPN GUGREFPW

Marked fridge GUG20DPMW GUGRFRSS GUGRFRMS GUGRFRPB GUGRFRPN GUGRFRPW

Marked fan GUG20DPMW GUGRFASS GUGRFAMS GUGRFAPB GUGRFAPN GUGRFAPW

Marked freezer GUG20DPMW GUGRFZSS GUGRFZMS GUGRFZPB GUGRFZPN GUGRFZPW

Marked fridge/freezer GUG20DPMW GUGRFRFZSS GUGRFRFZMS GUGRFRFZPB GUGRFRFZPN GUGRFRFZPW

Marked hob GUG20DPMW GUGRHOSS GUGRHOMS GUGRHOPB GUGRHOPN GUGRHOPW

Marked heater GUG20DPMW GUGRHESS GUGRHEMS GUGRHEPB GUGRHEPN GUGRHEPW

Marked microwave GUG20DPMW GUGRMWSS GUGRMWMS GUGRMWPB GUGRMWPN GUGRMWPW

Marked oven GUG20DPMW GUGROVSS GUGROVMS GUGROVPB GUGROVPN GUGROVPW

Marked tumble dryer GUG20DPMW GUGRTDSS GUGRTDMS GUGRTDPB GUGRTDPN GUGRTDPW

Marked washer dryer GUG20DPMW GUGRWDYSS GUGRWDYMS GUGRWDYPB GUGRWDYPN GUGRWDYPW

Marked waste disposal GUG20DPMW GUGRWDSS GUGRWDMS GUGRWDPB GUGRWDPN GUGRWDPW

Marked washing machine GUG20DPMW GUGRWMSS GUGRWMMS GUGRWMPB GUGRWMPN GUGRWMPW

6AX & 10AX modules

6AX 2 way retractive and centre off switch module GUG202OCWSS GUG202OCWMS GUG202OCWPB GUG202OCWPN GUG202OCWPW

10AX 2 way retractive switch module GUG102RWSS GUG102RWMS GUG102RWPB GUG102RWPN GUG102RWPW

10AX 2 way toggle switch module GUG102TWSS GUG102TWMS GUG102TWPB GUG102TWPN GUG102TWPW

10AX intermediate toggle switch module GUG10ITWSS GUG10ITWMS GUG10ITWPB GUG10ITWPN GUG10ITWPW


20AX DP key switch module GUG20DPKWSS GUG20DPKWMS GUG20DPKWPB GUG20DPKWPN GUG20DPKWPW

20AX 2 way key switch module GUG202KWSS GUG202KWMS GUG202KWPB GUG202KWPN GUG202KWPW

20AX 2 way key switch module marked EMG.LTG GUG202KELWSS GUG202KELWMS GUG202KELWPB GUG202KELWPN GUG202KELWPW

Communication modules

Master telephone outlet GUGTELMWSS GUGTELMWMS GUGTELMWPB GUGTELMWPN GUGTELMWPW

Secondary telephone outlet GUGTELSWSS GUGTELSWMS GUGTELSWPB GUGTELSWPN GUGTELSWPW

Single RJ11 data outlet GUGRJ11WSS GUGRJ11WMS GUGRJ11WPB GUGRJ11WPN GUGRJ11WPW


Single TV/FM coaxial GUGCOWSS GUGCOWMS GUGCOWPB GUGCOWPN GUGCOWPW

Single satellite GUGSATWSS GUGSATWMS GUGSATWPB GUGSATWPN GUGSATWPW

Electronic dimmer Electronic 300W/VA 2 way & multiway standard dimmer module

GUGEMDIMWSS16 GUGEMDIMWMS16 GUGEMDIMWPW16 GUGEMDIMWPW16 GUGEMDIMWPW16

Electronic 300W/VA infra red dimmer module GUGEMRDIMW16 GUGEMRDIMW16 GUGEMRDIMW16 GUGEMRDIMW16 GUGEMRDIMW16

2 way retractive switch GUGEMWWSS16 GUGEMWWMS16 GUGEMWWPB16 GUGEMWWPN16 GUGEMWWPW16

1 channel remote control GU6000RC116 GU6000RC116 GU6000RC116 GU6000RC116 GU6000RC116


13A fused connection unit module GUG13FCUWSS GUG13FCUWMS GUG13FCUWPB GUG13FCUWPN GUG13FCUWPW

Flex outlet (10mm dia) GUG16COWSS GUG16COWMS GUG16COWPB GUG16COWPN GUG16COWPW

Blank modules Blank module metal finish GUGBWSS GUGBWMS GUGBWPB GUGBWPN GUGBWPW





Spares

Hex screws (plate to grid) UHEXSSS UHEXSMS UHEXSPB UHEXSPN UHEXSPW




140

Ultimate screwless flat plate Black interior grid modules selection table

Wiring accessories

Finishes

Stainlesssteel

Mirrorsteel

Polishedbrass

Black nickel

Painted black




10AX 1 way SP GUG101MB GUGRSS GUGRMS GUGRPB GUGRBN GUGRBLK


10AX intermediate SP GUG10IMB GUGRSS GUGRMS GUGRPB GUGRBN GUGRBLK


20AX 2 way and off SP GUG2020MB GUGRSS GUGRMS GUGRPB GUGRBN GUGRBLK


20AX DP GUG20DPMB GUGRSS GUGRMS GUGRPB GUGRBN GUGRBLK


Module


Marked boiler GUG20DPMB GUGRBOSS GUGRBOMS GUGRBOPB GUGRBOBN GUGRBOBLK

Marked cooker hood GUG20DPMB GUGRCHSS GUGRCHMS GUGRCHPB GUGRCHBN GUGRCHBLK

Marked dish washer GUG20DPMB GUGRDWSS GUGRDWMS GUGRDWPB GUGRDWBN GUGRDWBLK

Marked extractor fan GUG20DPMB GUGREFSS GUGREFMS GUGREFPB GUGREFBN GUGREFBLK

Marked fridge GUG20DPMB GUGRFRSS GUGRFRMS GUGRFRPB GUGRFRBN GUGRFRBLK

Marked fan GUG20DPMB GUGRFASS GUGRFAMS GUGRFAPB GUGRFABN GUGRFABLK

Marked freezer GUG20DPMB GUGRFZSS GUGRFZMS GUGRFZPB GUGRFZBN GUGRFZBLK

Marked fridge/freezer GUG20DPMB GUGRFRFZSS GUGRFRFZMS GUGRFRFZPB GUGRFRFZBN GUGRFRFZBLK

Marked hob GUG20DPMB GUGRHOSS GUGRHOMS GUGRHOPB GUGRHOBN GUGRHOBLK

Marked heater GUG20DPMB GUGRHESS GUGRHEMS GUGRHEPB GUGRHEBN GUGRHEBLK

Marked microwave GUG20DPMB GUGRMWSS GUGRMWMS GUGRMWPB GUGRMWBN GUGRMWBLK

Marked oven GUG20DPMB GUGROVSS GUGROVMS GUGROVPB GUGROVBN GUGROVBLK

Marked tumble dryer GUG20DPMB GUGRTDSS GUGRTDMS GUGRTDPB GUGRTDBN GUGRTDBLK

Marked washer dryer GUG20DPMB GUGRWDYSS GUGRWDYMS GUGRWDYPB GUGRWDYBN GUGRWDYBLK

Marked waste disposal GUG20DPMB GUGRWDSS GUGRWDMS GUGRWDPB GUGRWDBN GUGRWDBLK

Marked washing machine GUG20DPMB GUGRWMSS GUGRWMMS GUGRWMPB GUGRWMBN GUGRWMBLK

6AX & 10AX modules

6AX 2 way retractive and centre off switch module GUG202OCBSS GUG202OCBMS GUG202OCBPB GUG202OCBBN GUG202OCBLK

10AX 2 way retractive switch module GUG102RBSS GUG102RBMS GUG102RBPB GUG102RBBN GUG102RBLK

10AX 2 way toggle switch module GUG102TBSS GUG102TBMS GUG102TBPB GUG102TBBN

10AX intermediate toggle switch module GUG10ITBSS GUG10ITBMS GUG10ITBPB GUG10ITBBN


20AX DP key switch module GUG20DPKBSS GUG20DPKBMS GUG20DPKBPB GUG20DPKBBN GUG20DPKBLK

20AX 2 way key switch module GUG202KBSS GUG202KBMS GUG202KBPB GUG202KBBN GUG202KBLK

20AX 2 way key switch module marked EMG.LTG GUG202KELBSS GUG202KELBMS GUG202KELBPB GUG202KELBBN GUG202KELBBN


Master telephone outlet GUGTELMBSS GUGTELMBMS GUGTELMBPB GUGTELMBBN GUGTELMBLK

Secondary telephone outlet GUGTELSBSS GUGTELSBMS GUGTELSBPB GUGTELSBBN GUGTELSBLK

Single RJ11 data outlet GUGRJ11BSS GUGRJ11BMS GUGRJ11BPB GUGRJ11BBN GUGRJ11BLK


Single TV/FM coaxial GUGCOBSS GUGCOBMS GUGCOBPB GUGCOBBN GUGCOBLK

Single satellite GUGSATBSS GUGSATBMS GUGSATBPB GUGSATBBN GUGSATBLK


GUGEMDIMBSS16 GUGEMDIMBMS16 GUGEMDIMBPB16 GUGEMDIMBBN16

Electronic 350W/VA infra red dimmer module GUGEMRDIMB16 GUGEMRDIMB16 GUGEMRDIMB16 GUGEMRDIMB16

2 way retractive switch GUGEMWBSS16 GUGEMWBMS16 GUGEMWBPB16 GUGEMWBBN16

1 channel remote control GU6000RC116 GU6000RC116 GU6000RC116 GU6000RC116


13A fused connection unit module GUG13FCUBSS GUG13FCUBMS GUG13FCUBPB GUG13FCUBBN GUG13FCUBLK

Flex outlet (10mm dia) GUG16COBSS GUG16COBMS GUG16COBPB GUG16COBBN GUG16COBLK

Blank modules Blank module metal finish GUGBBSS GUGBBMS GUGBBPB GUGBBBN

Blank module plastic GUGBB

Indicator modules Red neon indicator module GUGINDBR

Orange neon indicator module GUGINDBO

Green neon indicator module GUGINDBG

Spares

Hex screws (plate to grid)




141

Ultimate screwless flat plateWiring accessories

13A unswitched sockets

GU3450WSS

n Dimensions: 88 x 88mm (1 gang), 88 x 148mm (2 gang)n Mounting box: - SB251 (F) 1 gang - SB351 (F) 1 gang - SB252 (F) 2 gang - SB352 (F) 2 gangn Fix screws: M3.5 x 25mm and 30mm n BS 1363


GU3450*** 1 gang 1

GU3460*** 2 gang 1

13A switched sockets

GU3421BPB

GU3420CLR


Part number Description QtyGU3410*** 1 gang switched 1

GU3411*** 1 gang switched with neon 1

GU3420*** 2 gang switched 1

GU3421*** 2 gang switched with neons 1

GU3410D*** 1 gang DP switched 1


13A DP outboard rocker switched socket outletn Dimensions: 88 x 148mmn Mounting box: - SB252 (F) 2 gang - SB352 (F) 2 gangn Fixed screws: M3.5 x 25mm and 30mm n BS 1363

GU3431WSS


GU3431*** 2 gang switched with clean earth 1

GU3434*** 2 gang switched with clean earth, non standard and neons 1


GU3470BPC

n Dimensions: 88 x 88mmn Mounting box: SB251 (F)n Fixed screws: M3.5 x 25mm and 30mm n BS 546


GU3470*** 2A unswitched 1


GU3490*** 15A switched 1

Note Replace *** with suffix code to denote finish/interior colour required:WSS Stainless steel with white interior WPN Pearl nickel with white interior BPC Polished chrome with black interiorBSS Stainless steel with black interior BPB Polished brass with black interior WPC Polished chrome with white interiorWPW Painted white with white interior WPB Polished brass with white interior BBN Black nickel with black interiorBBK Polycarbonate piano black WWH Polycarbonate gloss white CLR Transparent

142



Media plates n Dimensions: 178 x 286mmn Mounting box dimensions: 160 x 270 x 40mm depth n Fix screws: M3.5 x 25mm and 30mmn BS 5733n BS 1363-2

GU3420DWSSMP

Part number Description QtyGU3420DWSSMP Media plate 4 socket 8 euromodule stainless steel white inserts 1GU3420DWPWMP Media plate 4 socket 8 euromodule white metal white inserts 1GU3420DWPCMP Media plate 4 socket 8 euromodule polished chrome white inserts 1GU3420DMP Media plate mounting box (Flush galv.) 1

16AX plate switches

GU1400F

GU1442WSS

GU1413WWH

n Dimensions: 88 x 88mm (1-3 gang), 88 x148mm (4-6 gang)n Mounting box: See selection table n Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-1n BS EN 60947-3 (GU1413***)n The glow in the dark frame discreetly sign-posts the profile of the switch and aids switch location Part number Description QtyGU1412*** 1 gang 2 way SP 1GU1412R*** *10A 1 gang 2 way retractive 1GU1422*** 2 gang 2 way SP 1GU1432*** 3 gang 2 way SP 1GU1442*** 4 gang 2 way SP 1GU1462*** 6 gang 2 way SP 1GU1413*** **3 pole isolator 1GU1414*** 1 gang intermediate 1GU1400F 1 gang glow in the dark frame 10

150W PIR plate switch

GUPA1411BSS

n Dimensions: 88 x 88mm (1 gang) n Mounting box: SB161 (F) 1 gangn Fix screws: M3.5 x 25mm and 30mmn 2 wire connectionn Operating distance = 6M at 45º horizontaln BS EN 60669-2-1n Stainless steel finish only with black insertn Time setting: 15 sec - 30 minn 10 - 2000 LuxPart number Description QtyGUPA1411BSS 1 gang 1 way PIR switch with override 1GUP1411BSS 1 gang 1 way PIR switch 1


GU1422TPB

n Dimensions: 88 x 88mm (1-3 gang), 88 x148mm (4 gang)n Mounting box: - SB161 (F) 1-2 gang - SB351 (F) 3 gang - SB252 (F) 4 gangn Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-1Part number Description QtyGU1412T** 1 gang 2 way 1GU1422T** 2 gang 2 way 1GU1432T** 3 gang 2 way 1GU1442T** 4 gang 2 way 1

* 16A rated** 10A rated

143


Electronic dimmers

GU6412EWSS

n Dimensions: 88 x 88mm (300VA)n Mounting box: Min SB251 (300VA)n Fix screws: M3.5 x 25mm and 30mmn IR remote unit requires remote controln All dimmers can be installed on 2 way and multiway circuitsn For 2 way operating remote switch must be changed for retractive switchn BS EN 60669-2-1

Part number Description QtyGU6412E*** 1 gang 300W/VA 1

GU6422E*** 2 gang 2 x 200W/VA 1

GU6412R*** 1 gang IR remote control 300W/VA 1

GU6000RC1 1 channel IR remote control 1

Note: Electronic dimmers not suitable for use with CFL and LED lamps of any type

GU64121WSS

n Dimensions: 88 x 148mm (1000W/VA)n Mounting box: SB472 (1000W)n Fix screws: M3.5 x 25mm and 30mmn 1000W dimmer is fitted on to a 2 gang platen All dimmers can be installed on 2 way and multiway circuitsn For 2 way operating remote switch must be changed for retractive switchn BS EN 60669-2-1

Part number Description QtyGU64121*** 1 gang 1000W/VA Black or White inserts 1

For product information and specification see technical section

Mains and low voltage dimmer switches

GU6412BK

GU6422PB

GU6412LVSS

n Dimensions: 88 x 88mm (1-2 gang), 88 x 148mm (3-4 gang)n Mounting box: - SB161 (F) 1G 1W only - SB251 (F) 1-2 gang - SB352 (F) 3-4 gangn Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-2-1

Part number Description QtyMains

GU6411** 1 gang 1 way 400W* 1

GU6412** 1 gang 2 way 400W 1

GU6422** 2 gang 2 way 250W 1

GU6432** 3 gang 2 way 250W 1

GU6442** 4 gang 2 way 250W 1

Low voltage

GU6411LV** 1 gang 1 way 400VA* 1

GU6412LV** 1 gang 2 way 400VA 1




Mains dimmer switches are not suitable on low voltage circuits. See technical section *1 way dimmers can be used to replace standard wall switches and retrofit into 16mm mounting box


144


Key card switch

GU1412KWPB

n Dimensions: 88 x 88mmn Mounting box: SB471(F)n Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-1n Non reader type, accepts any card (not supplied)n Will accept cards up to 85 x 53mmn Requires L&N connection

Part number Description QtyGU1412K*** 32A SP keycard switch with 30 sec time delay 1

20AX & 32A DP switches

GU2411BBN

n Dimensions: 88 x 88mmn Mounting box: SB351(F)n Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-1

Part number Description QtyGU2410*** 20A DP switch 1

GU2411*** 20A DP switch with neon 1

GU2413*** 20A DP switch with flex outlet 1

GU2414*** 20A DP switch with neon an flex outlet 1

GU2414WH*** 20A DP switch with neon and flex outlet marked water heater 1

GU4431*** 32A 1 gang DP switch with neon 1


GU5410WPC

n Dimensions: 88 x 88mmn Mounting box: - Unswitched SB251 (F) - Switched SB351 (F)n Fix screws: M3.5 x 25mm and 30mmn BS 1363

Part number Description QtyGU5400*** Unswitched 1

GU5403*** Unswitched with flex outlet 1

GU5410*** DP switched 1

GU5411*** DP switched with neon 1

GU5413*** DP switched with flex outlet 1

GU5414*** DP switched with neon and flex outlet 1

45A DP switches

GU4431BBN

n Dimensions: 148 x 88mm n Mounting box: SB472 (F)n Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-1

Part number Description QtyGU4421*** 45A 2 gang DP switch with neon (fits 2 gang box) 1

45A DP cooker controls

GU4401BPB

n Dimensions: 88 x 148mmn Mounting box: SB472 (F)n Fix screws: M3.5 x 25mm and 30mmn BS 4177

Part number Description QtyGU4401*** DP cooker control unit & 13A switched socket with neons 1


145


Shaver sockets

GU7490WSS

n Dimensions: 148 x 88mmn Mounting box: SB472 (F)n Fix screws: M3.5 x 25mm and 30mmn BS EN 61558-2-5


GU7490*** 115/230V dual voltage 1

Special unique design allows perfect fit to 47mm box

Telephone & data outlets

GU7461WPB

n Dimensions: 88 x 88mmn Mounting box: - SB251 (F) - SB351 (F)n Fix screws: M3.5 x 25mm and 30mmn BS EN 41003n Refer to euro modular range for further combinations


GU7451*** Single RJ11 outlet 1

GU7461*** Single telephone master 1

GU7462*** Single telephone secondary 1


TV outlets

GU7410WPN

n Dimensions: 88 x 88mmn Mounting box: SB251 (F)n Fix screws: M3.5 x 25mm and 30mmn Products are direct connection and not suitable for common connectionn BS 3041 (where applicable)

Part number De scription QtyGU7410*** Single TV/FM socket 1

GU7420*** Twin TV/FM socket 1

GU7430*** Single SAT socket 1

Blank plates

GU8410SS

n Dimensions: 88 x 88mm (1 gang), 88 x 148mm (2 gang)n Fix screws: M3.5 x 25mm and 30mmn BS 5733

Part number De scription QtyGU8410** 1 gang 1

GU8420** 2 gang 1


146


Euro modular plates

GU8480PN

n Dimensions: 88 x 88mm (1-2 gang), 88 x 148mm (4 gang)n Mounted grid supplied with framen Refer to module for appropriate mounting box depth


GU8450** 1 gang euro modular plate 1



Euro modules

GUE7081B

GUE7020B


Part number Description Module size QtyGUE7010* TV/Radio diplexer 2 1

GUE7011* Single IEC coax (female) 1 1

GUE7012* Single IEC coax (male) 1 1

GUE7030* Single F type sat 1 1

GUE7040* TV/Sat diplexer 2 1

GUE7081* TV/FM/Sat triplexer 2 1

GUE7082* TV/FM/Sat 1/Sat quadplexer 2 1

GUE7072W

GUE7020* HDMI 2 1

GUE7051* RJ11 modem 1 1

GUE7061* Telephone (BT master) 1 1

GUE7062* Telephone (BT secondary) 1 1

GUE7071* RJ45 CAT5e (not screened) 1 1

GUE7072* RJ45 CAT6 (not screened) 1 1

GUE7075* VGA 1 1

GUE7091* LexCom Performance outlet 1 8

GUE7000* 2 x Phono socket 1 1

GUE7001* 2 x Loudspeaker socket 1 1

GUE8010* Blank module 1 5

Grid plate

GUGS06GPB

Part number Description Dimensions QtyGUGS01G** 1 gang 88 x 88mm 1

GUGS02G** 2 gang 88 x 88mm 1





GUGS09G** 9 gang m 216 x 156mm 1

GUGS12G** 12 gang 216 x 156mm 1

GUGS18G** 18 gang 398 x 156mm 1

GUGS24G** 24 gang 3 398 x 156mm 1

Note Replace * with suffix code to denote module finish required:W White B BlackNote Replace ** with suffix code to denote plate finish required:SS Stainless steel BN Black nickelPN Pearl nickel PB Polished brassPC Polished chrome PW White metal

147

Ultimate screwless flat plate Wiring accessories

10AX & 20AX switch metal modules

Select required switch module and rocker cap

Snap rocker cap onto module

Module is now complete and ready to use

n 10AX & 20AX switch modules available in black or whiten Rocker caps available in all metal finishesn Pre printed rocker caps n Clear terminal marking printed onto grey back mouldings ensures easy identificationn Easy assemblyn BS EN 60669-1


Switch modules

White surround

GUG101MW 10AX 1 way SP 1


GUG10IMW 10AX intermediate SP 1


GUG2020MW 20AX 2 way and off SP 1


GUG20DPMW 20AX DP 1

Black surround

GUG101MB 10AX 1 way SP 1


GUG10IMB 10AX intermediate SP 1


GUG2020MB 20AX 2 way and off SP 1


GUG20DPMB 20AX DP 1


Metal rocker caps

GUGR** Plain rocker cap 6

GUGRBO** Marked boiler 6

GUGRCH** Marked cooker hood 6

GUGRDW** Marked dish washer 6

GUGREF** Marked extractor fan 6

GUGRFR** Marked fridge 6

GUGRFA** Marked fan 6

GUGRFZ** Marked freezer 6

GUGRFRFZ** Marked fridge/freezer 6

GUGRHO** Marked hob 6

GUGRHE** Marked heater 6

GUGRMW** Marked microwave 6

GUGROV** Marked oven 6

GUGRTD** Marked tumble dryer 6

GUGRWDY** Marked washer dryer 6

GUGRWD** Marked waste disposal 6

GUGRWM** Marked washing machine 6

Note Replace ** with suffix code to denote finish/interior colour requiredSS Stainless steel PN Pearl nickelPC Polished chrome BN Black nickelPB Polished brass PW Painted whiteBLK Painted black

148

6AX, 10AX & 20AX switch modules

GUG202KWPW

n BS EN 60669-1


GUG202OC*** 6AX 2 way retractive and centre off 1

GUG2020*** 6AX 2 way and centre off 1

GUG102R*** 10AX 2 way retractive SP 1

GUG102T*** 10AX 2 way SP toggle switch 1

GUG10IT*** 10AX intermediate toggle 1

GUG20DPK*** 20A 1 way DP key operated 1

GUG202K*** 20AX 2 way key operated 1

GUG202KEL*** 20AX 2 way key operated marked emergency lighting 1


GUGTELMWSS

n BS EN 3041 (where applicable)


GUGTELM*** BT master telephone 1

GUGTELS*** BT secondary telephone 1

GUGRJ11*** RJ11 telephone 1

GUGRJ45*** RJ45 data 1

GUGCO*** Direct coaxial TV 1

GUGSAT*** F type satellite 1

Note Replace *** with suffix code to denote finish/interior colour requiredNote Replace ** with suffix code to denote finish requiredWSS Stainless steel with white interior WPN Pearl nickel with white interior BMS Mirror steel with black interiorBSS Stainless steel with black interior BPB Polished brass with black interior WMS Mirror steel with white interiorWPW Painted white with white interior WPB Polished brass with white interior BBN Black nickel with black interiorBLK Painted black with black interior

Ultimate screwless flat plate Wiring accessories

149


Electronic dimmer modules

GUGEMDIMWPB16

n Electronic modules are capable of 2 way or multiway dimmingn For lamp suitability check the technical sectionn Min load 60W/50VAn Retractive switch for use with electronic dimmers onlyn Not compatible with moulded grid plates n Modules will require derating when used in multi-gang applications


GUGEMDIM***16 300W/VA universal multiway touch dimmer module 1

GUGEMRDIMW16/B16 300W/VA universal multiway touch dimmer module with infra red remote option (black or white)

1

GUGEMW*** 2 way & multiway retractive switch* 1


*50mA max rating

Fuse connections & flex outlets

GUG13FCUWMS

n Full metal surround on all modulesn Modules are completely interchangeablen BS 1363 n BS 5733


GUG13FCU*** 13A fuse carrier 1

GUG16CO*** Flex outlet up to 10mm ø 1

GUGBW White moulded blank 1

GUGBB Black moulded blank 1

GUGB*** Metal finish blank plate 1

Indicator modules

GUGINDWG

n 240Vn BS 5733


White

GUGINDWG Green indicator 1

GUGINDWO Orange Indicator 1

GUGINDWR Red indicator 1

Black

GUGINDBG Green indicator 1

GUGINDBO Orange Indicator 1

GUGINDBR Red indicator 1

Note Replace *** with suffix code to denote finish/interior colour requiredWSS Stainless steel with white interior WPN Pearl nickel with white interior BMS Mirror steel with black interiorBSS Stainless steel with black interior BPB Polished brass with black interior WMS Mirror steel with white interiorWPW Painted white with white interior WPB Polished brass with white interior BBN Black nickel with black interiorBLK Painted black with black interior

150

151

The ultra-slim Ultimate flat plate range is all about superior engineering and urbane style. This beautifully crafted, easy to install range adds that special finishing touch to any interior.

Available in a choice of six high quality plate finishes with black or white interior options, coordinating these accessories has never been easier.

Ultimate flat plate

Consumer

Comprehensive range extends to toggle and dimmer switches plus data communication and all control applications Colour matched flat headed screws and eyelets add that finishing touch Large plate footprint avoids the need for additional decorating on retrofits Smooth tactile switch action Slimline, compact neons for a subtle effect Curved, matching metal capped rockers that are aesthetically pleasing and easy to operate with a choice of white or black interior Fully matched grid system

Installer

Full 16AX fluorescent rating on all plate switches Minimal back projection to allow installation using standard flush mounting boxes for both new and retrofits, i.e. shaver sockets also allow installation using a standard 47mm mounting box Metal capped fuse carriers provide more visible metal on the plate Accessories supplied with both long and short screws for installation flexibility Large in-line angled colour coded terminals to aid cable insertion and selection Foam gasket to assist mounting on uneven walls or provide a barrier to moisture Double pole options on 1-gang and 2-gang switched sockets (Twin earth terminals on 2-gang sockets)


152

Ultimate flat plate selection tableWiring accessories

Finishes

Polished brass white interior

Polished brass black interior








Mountingboxdepth

13A socket outlets 1G 13A unswitched GU3250WPB GU3250BPB GU3250WPC GU3250BPC GU3250WPN GU3250WSS GU3250BSS GU3250WPW GU3250BBN *25/35mm

2G 13A unswitched GU3260WPB GU3260BPB GU3260WPC GU3260BPC GU3260WPN GU3260WSS GU3260BSS GU3260WPW GU3260BBN *25/35mm1G 13A switched GU3210WPB GU3210BPB GU3210WPC GU3210BPC GU3210WPN GU3210WSS GU3210BSS GU3210WPW GU3210BBN *25/35mm2G 13A switched GU3220WPB GU3220BPB GU3220WPC GU3220BPC GU3220WPN GU3220WSS GU3220BSS GU3220WPW GU3220BBN *25/35mm1G 13A switched + neon GU3211WPB GU3211BPB GU3211WPC GU3211BPC GU3211WPN GU3211WSS GU3211BSS GU3211WPW GU3211BBN *25/35mm2G 13A switched + neon GU3221WPB GU3221BPB GU3221WPC GU3221BPC GU3221WPN GU3221WSS GU3221BSS GU3221WPW GU3221BBN *25/35mm1G 13A DP switched GU3210DWPB GU3210DBPB GU3210DWPC GU3210DBPC GU3210DWPN GU3210DWSS GU3210DBSS GU3210DWPW GU3210DBBN *25/35mm2G 13A DP switched GU3220DWPB GU3220DBPB GU3220DWPC GU3220DBPC GU3220DWPN GU3220DWSS GU3220DBSS GU3220DWPW GU3220DBBN *25/35mm2G 13A O/B DP switched + C/E GU3231WPC GU3231BPC GU3231WSS GU3231BSS GU3231WPW GU3231BBN 35mm2G 13A O/B DP switched + C/E + N/S + Neon GU3234WPC GU3234WSS GU3234BSS 35mm1G 13A unswitched floor socket GU3251WPB GU3251WSS *25/35mm2G 13A unswitched floor socket GU3252WPB GU3252WSS 25/35mm

Round pin socket outlets 2A unswitched GU3270WPB GU3270BPB GU3270WPC GU3270BPC GU3270WPN GU3270WSS GU3270BSS GU3270WPW GU3270BBN 25mm5A unswitched GU3280WPB GU3280BPB GU3280WPC GU3280BPC GU3280WPN GU3280WSS GU3280BSS GU3280WPW GU3280BBN 25mm15A switched GU3290WPB GU3290BPB GU3290WPC GU3290BPC GU3290WPN GU3290WSS GU3290BSS GU3290WPW GU3290BBN 25mm

16AX plate switches 1G 2W switch GU1212WPB GU1212BPB GU1212WPC GU1212BPC GU1212WPN GU1212WSS GU1212BSS GU1212WPW GU1212BBN 16mm2G 2W switch GU1222WPB GU1222BPB GU1222WPC GU1222BPC GU1222WPN GU1222WSS GU1222BSS GU1222WPW GU1222BBN 16mm3G 2W switch GU1232WPB GU1232BPB GU1232WPC GU1232BPC GU1232WPN GU1232WSS GU1232BSS GU1232WPW GU1232BBN 25mm4G 2W switch GU1242WPB GU1242BPB GU1242WPC GU1242BPC GU1242WPN GU1242WSS GU1242BSS GU1242WPW GU1242BBN 25mm6G 2W switch GU1262WPB GU1262BPB GU1262WPC GU1262BPC GU1262WPN GU1262WSS GU1262BSS GU1262WPW GU1262BBN 25mm**1G TP isolator GU1213WPB GU1213BPB GU1213WPC GU1213BPC GU1213WPN GU1213WSS GU1213BSS GU1213WPW GU1213BBN 25mm1G intermediate switch GU1214WPB GU1214BPB GU1214WPC GU1214BPC GU1214WPN GU1214WSS GU1214BSS GU1214WPW GU1214BBN 25mm**1G 2W retractive switch GU1212RWPB GU1212RBPB GU1212RWPC GU1212RBPC GU1212RWPN GU1212RWSS GU1212RBSS GU1212RWPW GU1212RBBN 25mm

10AX toggle switches 1G 2W 10AX GU1212TPB GU1212TPB GU1212TPC GU1212TPC GU1212TPN GU1212TSS GU1212TSS GU1212TPW GU1212TBN 16mm2G 2W 10AX GU1222TPB GU1222TPB GU1222TPC GU1222TPC GU1222TPN GU1222TSS GU1222TSS GU1222TPW GU1222TBN 16mm3G 2W 10AX GU1232TPB GU1232TPB GU1232TPC GU1232TPC GU1232TPN GU1232TSS GU1232TSS GU1232TPW GU1232TBN 25mm4G 2W 10AX GU1242TPB GU1242TPB GU1242TPC GU1242TPC GU1242TPN GU1242TSS GU1242TSS GU1242TPW GU1242TBN 25mm

Dimmer switches 1G 1W 400W mains GU6211PB GU6211PB GU6211PC GU6211PC GU6211PN GU6211SS GU6211SS GU6211PW GU6211BN 16mm1G 2W 400W mains GU6212PB GU6212PB GU6212PC GU6212PC GU6212PN GU6212SS GU6212SS GU6212PW GU6212BN 25mm2G 2W 250W mains GU6222PB GU6222PB GU6222PC GU6222PC GU6222PN GU6222SS GU6222SS GU6222PW GU6222BN 25mm3G 2W 250W mains GU6232PB GU6232PB GU6232PC GU6232PC GU6232PN GU6232SS GU6232SS GU6232PW GU6232BN 35mm4G 2W 250W mains GU6242PB GU6242PB GU6242PC GU6242PC GU6242PN GU6242SS GU6242SS GU6242PW GU6242BN 35mm1G 1W 400VA low voltage GU6211LVPB GU6211LVPB GU6211LVPC GU6211LVPC GU6211LVPN GU6211LVSS GU6211LVSS GU6211LVPW GU6211LVBN 16mm1G 2W 400VA low voltage GU6212LVPB GU6212LVPB GU6212LVPC GU6212LVPC GU6212LVPN GU6212LVSS GU6212LVSS GU6212LVPW GU6212LVBN 25mm2G 2W 250VA low voltage GU6222LVPB GU6222LVPB GU6222LVPC GU6222LVPC GU6222LVPN GU6222LVSS GU6222LVSS GU6222LVPW GU6222LVBN 25mm3G 2W 250VA low voltage GU6232LVPB GU6232LVPB GU6232LVPC GU6232LVPC GU6232LVPN GU6232LVSS GU6232LVSS GU6232LVPW GU6232LVBN 35mm4G 2W 250VA low voltage GU6242LVPB GU6242LVPB GU6242LVPC GU6242LVPC GU6242LVPN GU6242LVSS GU6242LVSS GU6242LVPW GU6242LVBN 35mm1G slimline IR remote control 300VA electronic GU6212RWPB GU6212RBPB GU6212RWPC GU6212RBPC GU6212RWPN GU6212RWSS GU6212RBSS GU6212RWPW GU6212RBBN 25mm1 channel remote contol GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 N/A

20A DP plate switches 20A DP switch GU2210WPB GU2210BPB GU2210WPC GU2210BPC GU2210WPN GU2210WSS GU2210BSS GU2210WPW GU2210BBN 25mm20A DP switch + flex outlet GU2213WPB GU2213BPB GU2213WPC GU2213BPC GU2213WPN GU2213WSS GU2213BSS GU2213WPW GU2213BBN 35mm20A DP switch + neon GU2211WPB GU2211BPB GU2211WPC GU2211BPC GU2211WPN GU2211WSS GU2211BSS GU2211WPW GU2211BBN 25mm20A DP switch + neon + flex outlet GU2214WPB GU2214BPB GU2214WPC GU2214BPC GU2214WPN GU2214WSS GU2214BSS GU2214WPW GU2214BBN 35mm20A DP switch + neon + flex outlet marked water heater GU2214WHWPB GU2214WHBPB GU2214WHWPC GU2214WHBPC GU2214WHWPN GU2214WHWSS GU2214WHBSS GU2214WHWPW GU2214WHBBN 35mm32A 1G DP switch + neon GU4231WPB GU4231BPB GU4231WPC GU4231BPC GU4231WPN GU4231WSS GU4231BSS GU4231WPW GU4231BBN 47mm

Fused connection units 13A unswitched GU5200WPB GU5200BPB GU5200WPC GU5200BPC GU5200WPN GU5200WSS GU5200BSS GU5200WPW GU5200BBN 25mm13A unswitched + flex outlet GU5203WPB GU5203BPB GU5203WPC GU5203BPC GU5203WPN GU5203WSS GU5203BSS GU5203WPW GU5203BBN 35mm13A switched GU5210WPB GU5210BPB GU5210WPC GU5210BPC GU5210WPN GU5210WSS GU5210BSS GU5210WPW GU5210BBN 35mm13A switched + flex outlet GU5213WPB GU5213BPB GU5213WPC GU5213BPC GU5213WPN GU5213WSS GU5213BSS GU5213WPW GU5213BBN 35mm13A switched + neon GU5211WPB GU5211BPB GU5211WPC GU5211BPC GU5211WPN GU5211WSS GU5211BSS GU5211WPW GU5211BBN 35mm13A switched + neon+ flex outlet GU5214WPB GU5214BPB GU5214WPC GU5214BPC GU5214WPN GU5214WSS GU5214BSS GU5214WPW GU5214BBN 35mm

* Dependent upon wiring configuration, to aid installation 35mm flush steel boxes are recommended. ** 10A rated

Due to large plate foot print products may not be compatible with flush dual mounting boxes

153

Finishes










Mountingboxdepth

13A socket outlets 1G 13A unswitched GU3250WPB GU3250BPB GU3250WPC GU3250BPC GU3250WPN GU3250WSS GU3250BSS GU3250WPW GU3250BBN *25/35mm

2G 13A unswitched GU3260WPB GU3260BPB GU3260WPC GU3260BPC GU3260WPN GU3260WSS GU3260BSS GU3260WPW GU3260BBN *25/35mm1G 13A switched GU3210WPB GU3210BPB GU3210WPC GU3210BPC GU3210WPN GU3210WSS GU3210BSS GU3210WPW GU3210BBN *25/35mm2G 13A switched GU3220WPB GU3220BPB GU3220WPC GU3220BPC GU3220WPN GU3220WSS GU3220BSS GU3220WPW GU3220BBN *25/35mm1G 13A switched + neon GU3211WPB GU3211BPB GU3211WPC GU3211BPC GU3211WPN GU3211WSS GU3211BSS GU3211WPW GU3211BBN *25/35mm2G 13A switched + neon GU3221WPB GU3221BPB GU3221WPC GU3221BPC GU3221WPN GU3221WSS GU3221BSS GU3221WPW GU3221BBN *25/35mm1G 13A DP switched GU3210DWPB GU3210DBPB GU3210DWPC GU3210DBPC GU3210DWPN GU3210DWSS GU3210DBSS GU3210DWPW GU3210DBBN *25/35mm2G 13A DP switched GU3220DWPB GU3220DBPB GU3220DWPC GU3220DBPC GU3220DWPN GU3220DWSS GU3220DBSS GU3220DWPW GU3220DBBN *25/35mm2G 13A O/B DP switched + C/E GU3231WPC GU3231BPC GU3231WSS GU3231BSS GU3231WPW GU3231BBN 35mm2G 13A O/B DP switched + C/E + N/S + Neon GU3234WPC GU3234WSS GU3234BSS 35mm1G 13A unswitched floor socket GU3251WPB GU3251WSS *25/35mm2G 13A unswitched floor socket GU3252WPB GU3252WSS 25/35mm

Round pin socket outlets 2A unswitched GU3270WPB GU3270BPB GU3270WPC GU3270BPC GU3270WPN GU3270WSS GU3270BSS GU3270WPW GU3270BBN 25mm5A unswitched GU3280WPB GU3280BPB GU3280WPC GU3280BPC GU3280WPN GU3280WSS GU3280BSS GU3280WPW GU3280BBN 25mm15A switched GU3290WPB GU3290BPB GU3290WPC GU3290BPC GU3290WPN GU3290WSS GU3290BSS GU3290WPW GU3290BBN 25mm

16AX plate switches 1G 2W switch GU1212WPB GU1212BPB GU1212WPC GU1212BPC GU1212WPN GU1212WSS GU1212BSS GU1212WPW GU1212BBN 16mm2G 2W switch GU1222WPB GU1222BPB GU1222WPC GU1222BPC GU1222WPN GU1222WSS GU1222BSS GU1222WPW GU1222BBN 16mm3G 2W switch GU1232WPB GU1232BPB GU1232WPC GU1232BPC GU1232WPN GU1232WSS GU1232BSS GU1232WPW GU1232BBN 25mm4G 2W switch GU1242WPB GU1242BPB GU1242WPC GU1242BPC GU1242WPN GU1242WSS GU1242BSS GU1242WPW GU1242BBN 25mm6G 2W switch GU1262WPB GU1262BPB GU1262WPC GU1262BPC GU1262WPN GU1262WSS GU1262BSS GU1262WPW GU1262BBN 25mm**1G TP isolator GU1213WPB GU1213BPB GU1213WPC GU1213BPC GU1213WPN GU1213WSS GU1213BSS GU1213WPW GU1213BBN 25mm1G intermediate switch GU1214WPB GU1214BPB GU1214WPC GU1214BPC GU1214WPN GU1214WSS GU1214BSS GU1214WPW GU1214BBN 25mm**1G 2W retractive switch GU1212RWPB GU1212RBPB GU1212RWPC GU1212RBPC GU1212RWPN GU1212RWSS GU1212RBSS GU1212RWPW GU1212RBBN 25mm

10AX toggle switches 1G 2W 10AX GU1212TPB GU1212TPB GU1212TPC GU1212TPC GU1212TPN GU1212TSS GU1212TSS GU1212TPW GU1212TBN 16mm2G 2W 10AX GU1222TPB GU1222TPB GU1222TPC GU1222TPC GU1222TPN GU1222TSS GU1222TSS GU1222TPW GU1222TBN 16mm3G 2W 10AX GU1232TPB GU1232TPB GU1232TPC GU1232TPC GU1232TPN GU1232TSS GU1232TSS GU1232TPW GU1232TBN 25mm4G 2W 10AX GU1242TPB GU1242TPB GU1242TPC GU1242TPC GU1242TPN GU1242TSS GU1242TSS GU1242TPW GU1242TBN 25mm

Dimmer switches 1G 1W 400W mains GU6211PB GU6211PB GU6211PC GU6211PC GU6211PN GU6211SS GU6211SS GU6211PW GU6211BN 16mm1G 2W 400W mains GU6212PB GU6212PB GU6212PC GU6212PC GU6212PN GU6212SS GU6212SS GU6212PW GU6212BN 25mm2G 2W 250W mains GU6222PB GU6222PB GU6222PC GU6222PC GU6222PN GU6222SS GU6222SS GU6222PW GU6222BN 25mm3G 2W 250W mains GU6232PB GU6232PB GU6232PC GU6232PC GU6232PN GU6232SS GU6232SS GU6232PW GU6232BN 35mm4G 2W 250W mains GU6242PB GU6242PB GU6242PC GU6242PC GU6242PN GU6242SS GU6242SS GU6242PW GU6242BN 35mm1G 1W 400VA low voltage GU6211LVPB GU6211LVPB GU6211LVPC GU6211LVPC GU6211LVPN GU6211LVSS GU6211LVSS GU6211LVPW GU6211LVBN 16mm1G 2W 400VA low voltage GU6212LVPB GU6212LVPB GU6212LVPC GU6212LVPC GU6212LVPN GU6212LVSS GU6212LVSS GU6212LVPW GU6212LVBN 25mm2G 2W 250VA low voltage GU6222LVPB GU6222LVPB GU6222LVPC GU6222LVPC GU6222LVPN GU6222LVSS GU6222LVSS GU6222LVPW GU6222LVBN 25mm3G 2W 250VA low voltage GU6232LVPB GU6232LVPB GU6232LVPC GU6232LVPC GU6232LVPN GU6232LVSS GU6232LVSS GU6232LVPW GU6232LVBN 35mm4G 2W 250VA low voltage GU6242LVPB GU6242LVPB GU6242LVPC GU6242LVPC GU6242LVPN GU6242LVSS GU6242LVSS GU6242LVPW GU6242LVBN 35mm1G slimline IR remote control 300VA electronic GU6212RWPB GU6212RBPB GU6212RWPC GU6212RBPC GU6212RWPN GU6212RWSS GU6212RBSS GU6212RWPW GU6212RBBN 25mm1 channel remote contol GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 GU6000RC1 N/A

20A DP plate switches 20A DP switch GU2210WPB GU2210BPB GU2210WPC GU2210BPC GU2210WPN GU2210WSS GU2210BSS GU2210WPW GU2210BBN 25mm20A DP switch + flex outlet GU2213WPB GU2213BPB GU2213WPC GU2213BPC GU2213WPN GU2213WSS GU2213BSS GU2213WPW GU2213BBN 35mm20A DP switch + neon GU2211WPB GU2211BPB GU2211WPC GU2211BPC GU2211WPN GU2211WSS GU2211BSS GU2211WPW GU2211BBN 25mm20A DP switch + neon + flex outlet GU2214WPB GU2214BPB GU2214WPC GU2214BPC GU2214WPN GU2214WSS GU2214BSS GU2214WPW GU2214BBN 35mm20A DP switch + neon + flex outlet marked water heater GU2214WHWPB GU2214WHBPB GU2214WHWPC GU2214WHBPC GU2214WHWPN GU2214WHWSS GU2214WHBSS GU2214WHWPW GU2214WHBBN 35mm32A 1G DP switch + neon GU4231WPB GU4231BPB GU4231WPC GU4231BPC GU4231WPN GU4231WSS GU4231BSS GU4231WPW GU4231BBN 47mm

Fused connection units 13A unswitched GU5200WPB GU5200BPB GU5200WPC GU5200BPC GU5200WPN GU5200WSS GU5200BSS GU5200WPW GU5200BBN 25mm13A unswitched + flex outlet GU5203WPB GU5203BPB GU5203WPC GU5203BPC GU5203WPN GU5203WSS GU5203BSS GU5203WPW GU5203BBN 35mm13A switched GU5210WPB GU5210BPB GU5210WPC GU5210BPC GU5210WPN GU5210WSS GU5210BSS GU5210WPW GU5210BBN 35mm13A switched + flex outlet GU5213WPB GU5213BPB GU5213WPC GU5213BPC GU5213WPN GU5213WSS GU5213BSS GU5213WPW GU5213BBN 35mm13A switched + neon GU5211WPB GU5211BPB GU5211WPC GU5211BPC GU5211WPN GU5211WSS GU5211BSS GU5211WPW GU5211BBN 35mm13A switched + neon+ flex outlet GU5214WPB GU5214BPB GU5214WPC GU5214BPC GU5214WPN GU5214WSS GU5214BSS GU5214WPW GU5214BBN 35mm

* Dependent upon wiring configuration, to aid installation 35mm flush steel boxes are recommended. ** 10A rated


154

Ultimate flat plate selection tableWiring accessories

Finishes










Mountingboxdepth

45A control switches 45A 2G DP switch + neon GU4221WPB GU4221BPB GU4221WPC GU4221BPC GU4221WPN GU4221WSS GU4221BSS GU4221WPW GU4221BBN 47mm


45A DP cooker control unit + 13A switched socket + neon GU4201WPB GU4201BPB GU4201WPC GU4201BPC GU4201WPN GU4201WSS GU4201BSS GU4201WPW GU4201BBN 47mm

Shaver socket outlet 115/230V dual voltage GU7290WPB GU7290BPB GU7290WPC GU7290BPC GU7290WPN GU7290WSS GU7290BSS GU7290WPW GU7290BBN 47mm

Telephone and data outlets


Master telephone outlet GU7261WPB GU7261BPB GU7261WPC GU7261BPC GU7261WPN GU7261WSS GU7261BSS GU7261WPW GU7261BBN 25mm

Secondary telephone outlet GU7262WPB GU7262BPB GU7262WPC GU7262BPC GU7262WPN GU7262WSS GU7262BSS GU7262WPW GU7262BBN 25mm


TV socket outlets Single TV/FM coaxial socket GU7210WPB GU7210BPB GU7210WPC GU7210BPC GU7210WPN GU7210WSS GU7210BSS GU7210WPW GU7210BBN 25mm



Euro modular plates 1G euro plate GU8250PB GU8250PB GU8250PC GU8250PC GU8250PN GU8250SS GU8250SS GU8250PW GU8250BN **



Blank plates 1G blank plate GU8210PB GU8210PB GU8210PC GU8210PC GU8210PN GU8210SS GU8210SS GU8210PW GU8210BN N/A


Replacement screws M3.5 x 50mm countersunk USCREW50PB USCREW50PB USCREW50PC USCREW50PC USCREW50PN USCREW50SS USCREW50SS USCREW50PW USCREW50BN N/A


155

Finishes










Mountingboxdepth

45A control switches 45A 2G DP switch + neon GU4221WPB GU4221BPB GU4221WPC GU4221BPC GU4221WPN GU4221WSS GU4221BSS GU4221WPW GU4221BBN 47mm


45A DP cooker control unit + 13A switched socket + neon GU4201WPB GU4201BPB GU4201WPC GU4201BPC GU4201WPN GU4201WSS GU4201BSS GU4201WPW GU4201BBN 47mm

Shaver socket outlet 115/230V dual voltage GU7290WPB GU7290BPB GU7290WPC GU7290BPC GU7290WPN GU7290WSS GU7290BSS GU7290WPW GU7290BBN 47mm

Telephone and data outlets


Master telephone outlet GU7261WPB GU7261BPB GU7261WPC GU7261BPC GU7261WPN GU7261WSS GU7261BSS GU7261WPW GU7261BBN 25mm

Secondary telephone outlet GU7262WPB GU7262BPB GU7262WPC GU7262BPC GU7262WPN GU7262WSS GU7262BSS GU7262WPW GU7262BBN 25mm


TV socket outlets Single TV/FM coaxial socket GU7210WPB GU7210BPB GU7210WPC GU7210BPC GU7210WPN GU7210WSS GU7210BSS GU7210WPW GU7210BBN 25mm



Euro modular plates 1G euro plate GU8250PB GU8250PB GU8250PC GU8250PC GU8250PN GU8250SS GU8250SS GU8250PW GU8250BN **



Blank plates 1G blank plate GU8210PB GU8210PB GU8210PC GU8210PC GU8210PN GU8210SS GU8210SS GU8210PW GU8210BN N/A


Replacement screws M3.5 x 50mm countersunk USCREW50PB USCREW50PB USCREW50PC USCREW50PC USCREW50PN USCREW50SS USCREW50SS USCREW50PW USCREW50BN N/A


156

Ultimate flat plateGrid front plate selection table

Wiring accessories





Front plates are available in a choice of 6 finishes - Polished Brass, Mirror Steel, Stainless Steel, Pearl Nickel, Black Nickel, Painted White.

1 2 3 4 6 8 9 12 18 24

FlushFlat plate Stainless steel GUG01GSS GUG02GSS GUG03GSS GUG04GSS GUG06GSS GUG08GSS GUG09GSS GUG12GSS GUG18GSS GUG24GSS

Mirror steel GUG01GMS GUG02GMS GUG03GMS GUG04GMS GUG06GMS GUG08GMS GUG09GMS GUG12GMS GUG18GMS GUG24GMS

Polished brass GUG01GPB GUG02GPB GUG03GPB GUG04GPB GUG06GPB GUG08GPB GUG09GPB GUG12GPB GUG18GPB GUG24GPB

Black nickel GUG01GBN GUG02GBN GUG03GBN GUG04GBN GUG06GBN GUG08GBN GUG09GBN GUG12GBN GUG18GBN GUG24GBN

Pearl nickel GUG01GPN GUG02GPN GUG03GPN GUG04GPN GUG06GPN GUG08GPN GUG09GPN GUG12GPN GUG18GPN GUG24GPN

White metal GUG01GPW GUG02GPW GUG03GPW GUG04GPW GUG06GPW GUG08GPW GUG09GPW GUG12GPW GUG18GPW GUG24GPW




76 x 7642mm

136 x 76 42mm

136 x 76 42mm

136 x 136 42mm

136 x 136 42mm

193 x 133 42mm

193 x 133 42mm

374 x 133 42mm

374 x 133 42mm

157

Ultimate flat plate White interior grid modules

Wiring accessories

Finishes

Stainlesssteel

Mirrorsteel

Polishedbrass

Pearl nickel

Painted white






10AX intermediate SP GUG10IMW GUGRSS GUGRMS GUGRPB GUGRPN GUGRPW


20AX 2 way and off SP GUG2020MW GUGRSS GUGRMS GUGRPB GUGRPN GUGRPW


20AX DP GUG20DPMW GUGRSS GUGRMS GUGRPB GUGRPN GUGRPW




Marked boiler GUG20DPMW GUGRBOSS GUGRBOMS GUGRBOPB GUGRBOPN GUGRBOPW

Marked cooker hood GUG20DPMW GUGRCHSS GUGRCHMS GUGRCHPB GUGRCHPN GUGRCHPW

Marked dish washer GUG20DPMW GUGRDWSS GUGRDWMS GUGRDWPB GUGRDWPN GUGRDWPW

Marked extractor fan GUG20DPMW GUGREFSS GUGREFMS GUGREFPB GUGREFPN GUGREFPW

Marked fridge GUG20DPMW GUGRFRSS GUGRFRMS GUGRFRPB GUGRFRPN GUGRFRPW

Marked fan GUG20DPMW GUGRFASS GUGRFAMS GUGRFAPB GUGRFAPN GUGRFAPW

Marked freezer GUG20DPMW GUGRFZSS GUGRFZMS GUGRFZPB GUGRFZPN GUGRFZPW

Marked fridge/freezer GUG20DPMW GUGRFRFZSS GUGRFRFZMS GUGRFRFZPB GUGRFRFZPN GUGRFRFZPW

Marked hob GUG20DPMW GUGRHOSS GUGRHOMS GUGRHOPB GUGRHOPN GUGRHOPW

Marked heater GUG20DPMW GUGRHESS GUGRHEMS GUGRHEPB GUGRHEPN GUGRHEPW

Marked microwave GUG20DPMW GUGRMWSS GUGRMWMS GUGRMWPB GUGRMWPN GUGRMWPW

Marked oven GUG20DPMW GUGROVSS GUGROVMS GUGROVPB GUGROVPN GUGROVPW

Marked tumble dryer GUG20DPMW GUGRTDSS GUGRTDMS GUGRTDPB GUGRTDPN GUGRTDPW

Marked washer dryer GUG20DPMW GUGRWDYSS GUGRWDYMS GUGRWDYPB GUGRWDYPN GUGRWDYPW

Marked waste disposal GUG20DPMW GUGRWDSS GUGRWDMS GUGRWDPB GUGRWDPN GUGRWDPW

Marked washing machine GUG20DPMW GUGRWMSS GUGRWMMS GUGRWMPB GUGRWMPN GUGRWMPW

6AX & 10AX modules

6AX 2 way retractive and centre off switch module GUG202OCWSS GUG202OCWMS GUG202OCWPB GUG202OCWPN GUG202OCWPW

10AX 2 way retractive switch module GUG102RWSS GUG102RWMS GUG102RWPB GUG102RWPN GUG102RWPW

10AX 2 way toggle switch module GUG102TWSS GUG102TWMS GUG102TWPB GUG102TWPN GUG102TWPW

10AX intermediate toggle switch module GUG10ITWSS GUG10ITWMS GUG10ITWPB GUG10ITWPN GUG10ITWPW


20AX DP key switch module GUG20DPKWSS GUG20DPKWMS GUG20DPKWPB GUG20DPKWPN GUG20DPKWPW

20AX 2 way key switch module GUG202KWSS GUG202KWMS GUG202KWPB GUG202KWPN GUG202KWPW

20AX 2 way key switch module marked EMG.LTG GUG202KELWSS GUG202KELWMS GUG202KELWPB GUG202KELWPN GUG202KELWPW


Master telephone outlet GUGTELMWSS GUGTELMWMS GUGTELMWPB GUGTELMWPN GUGTELMWPW

Secondary telephone outlet GUGTELSWSS GUGTELSWMS GUGTELSWPB GUGTELSWPN GUGTELSWPW



Single TV/FM coaxial GUGCOWSS GUGCOWMS GUGCOWPB GUGCOWPN GUGCOWPW

Single satellite GUGSATWSS GUGSATWMS GUGSATWPB GUGSATWPN GUGSATWPW


GUGEMDIMWSS16 GUGEMDIMWMS16 GUGEMDIMWPW16 GUGEMDIMWPW16 GUGEMDIMWPW16

Electronic 300W/VA infra red dimmer module GUGEMRDIMW16 GUGEMRDIMW16 GUGEMRDIMW16 GUGEMRDIMW16 GUGEMRDIMW16

2 way retractive switch GUGEMWWSS16 GUGEMWWMS16 GUGEMWWPB16 GUGEMWWPN16 GUGEMWWPW16

1 channel remote control GU6000RC116 GU6000RC116 GU6000RC116 GU6000RC116 GU6000RC116


13A fused connection unit module GUG13FCUWSS GUG13FCUWMS GUG13FCUWPB GUG13FCUWPN GUG13FCUWPW

Flex outlet (10mm dia) GUG16COWSS GUG16COWMS GUG16COWPB GUG16COWPN GUG16COWPW

Blank modules Blank module metal finish GUGBWSS GUGBWMS GUGBWPB GUGBWPN GUGBWPW





Spares

Hex screws (plate to grid) UHEXSSS UHEXSMS UHEXSPB UHEXSPN UHEXSPW




158

Ultimate flat plate Black interior grid modules

Wiring accessories

Finishes

Stainlesssteel

Mirrorsteel

Polishedbrass

Black nickel

Painted black






10AX intermediate SP GUG10IMB GUGRSS GUGRMS GUGRPB GUGRBN GUGRBLK


20AX 2 way and off SP GUG2020MB GUGRSS GUGRMS GUGRPB GUGRBN GUGRBLK


20AX DP GUG20DPMB GUGRSS GUGRMS GUGRPB GUGRBN GUGRBLK


Module


Marked boiler GUG20DPMB GUGRBOSS GUGRBOMS GUGRBOPB GUGRBOBN GUGRBOBLK

Marked cooker hood GUG20DPMB GUGRCHSS GUGRCHMS GUGRCHPB GUGRCHBN GUGRCHBLK

Marked dish washer GUG20DPMB GUGRDWSS GUGRDWMS GUGRDWPB GUGRDWBN GUGRDWBLK

Marked extractor fan GUG20DPMB GUGREFSS GUGREFMS GUGREFPB GUGREFBN GUGREFBLK

Marked fridge GUG20DPMB GUGRFRSS GUGRFRMS GUGRFRPB GUGRFRBN GUGRFRBLK

Marked fan GUG20DPMB GUGRFASS GUGRFAMS GUGRFAPB GUGRFABN GUGRFABLK

Marked freezer GUG20DPMB GUGRFZSS GUGRFZMS GUGRFZPB GUGRFZBN GUGRFZBLK

Marked fridge/freezer GUG20DPMB GUGRFRFZSS GUGRFRFZMS GUGRFRFZPB GUGRFRFZBN GUGRFRFZBLK

Marked hob GUG20DPMB GUGRHOSS GUGRHOMS GUGRHOPB GUGRHOBN GUGRHOBLK

Marked heater GUG20DPMB GUGRHESS GUGRHEMS GUGRHEPB GUGRHEBN GUGRHEBLK

Marked microwave GUG20DPMB GUGRMWSS GUGRMWMS GUGRMWPB GUGRMWBN GUGRMWBLK

Marked oven GUG20DPMB GUGROVSS GUGROVMS GUGROVPB GUGROVBN GUGROVBLK

Marked tumble dryer GUG20DPMB GUGRTDSS GUGRTDMS GUGRTDPB GUGRTDBN GUGRTDBLK

Marked washer dryer GUG20DPMB GUGRWDYSS GUGRWDYMS GUGRWDYPB GUGRWDYBN GUGRWDYBLK

Marked waste disposal GUG20DPMB GUGRWDSS GUGRWDMS GUGRWDPB GUGRWDBN GUGRWDBLK

Marked washing machine GUG20DPMB GUGRWMSS GUGRWMMS GUGRWMPB GUGRWMBN GUGRWMBLK

6AX & 10AX modules

6AX 2 way retractive and centre off switch module GUG202OCBSS GUG202OCBMS GUG202OCBPB GUG202OCBBN GUG202OCBLK

10AX 2 way retractive switch module GUG102RBSS GUG102RBMS GUG102RBPB GUG102RBBN GUG102RBLK

10AX 2 way toggle switch module GUG102TBSS GUG102TBMS GUG102TBPB GUG102TBBN

10AX intermediate toggle switch module GUG10ITBSS GUG10ITBMS GUG10ITBPB GUG10ITBBN


20AX DP key switch module GUG20DPKBSS GUG20DPKBMS GUG20DPKBPB GUG20DPKBBN GUG20DPKBLK

20AX 2 way key switch module GUG202KBSS GUG202KBMS GUG202KBPB GUG202KBBN GUG202KBLK

20AX 2 way key switch module marked EMG.LTG GUG202KELBSS GUG202KELBMS GUG202KELBPB GUG202KELBBN GUG202KELBBN


Master telephone outlet GUGTELMBSS GUGTELMBMS GUGTELMBPB GUGTELMBBN GUGTELMBLK

Secondary telephone outlet GUGTELSBSS GUGTELSBMS GUGTELSBPB GUGTELSBBN GUGTELSBLK



Single TV/FM coaxial GUGCOBSS GUGCOBMS GUGCOBPB GUGCOBBN GUGCOBLK

Single satellite GUGSATBSS GUGSATBMS GUGSATBPB GUGSATBBN GUGSATBLK


GUGEMDIMBSS16 GUGEMDIMBMS16 GUGEMDIMBPB16 GUGEMDIMBBN16

Electronic 350W/VA infra red dimmer module GUGEMRDIMB16 GUGEMRDIMB16 GUGEMRDIMB16 GUGEMRDIMB16

2 way retractive switch GUGEMWBSS16 GUGEMWBMS16 GUGEMWBPB16 GUGEMWBBN16

1 channel remote control GU6000RC116 GU6000RC116 GU6000RC116 GU6000RC116


13A fused connection unit module GUG13FCUBSS GUG13FCUBMS GUG13FCUBPB GUG13FCUBBN GUG13FCUBLK

Flex outlet (10mm dia) GUG16COBSS GUG16COBMS GUG16COBPB GUG16COBBN GUG16COBLK

Blank modules Blank module metal finish GUGBBSS GUGBBMS GUGBBPB GUGBBBN





Spares





159

Ultimate flat plateWiring accessories

13A unswitched sockets

GU3250WSS



GU3250*** 1 gang 1

GU3260*** 2 gang 1

13A switched sockets

GU3220WPC




GU3211*** 1 gang switched with neon 1


GU3221*** 2 gang switched with neons 1



13A DP outboard rocker switched socket outlet

GU3234WSS

n Dimensions: 88 x 88mmn Mounting box: - SB252 (F) - SB352 (F)n Fixed screws: M3.5 x 25mm and 30mm n BS 1363

Part number Description QtyGU3231*** 2 gang switched with clean earth 1

GU3234*** 2 gang switched with clean earth non standard and neons 1


GU3280WPB

n Dimensions: 88 x 88mmn Mounting box: SB251 (F)n Fixed screws: M3.5 x 25mm and 30mm n BS 546

Part number Description QtyGU3270*** 2A unswitched 1


GU3290*** 15A switched 1

Note Replace *** with suffix code to denote finish/interior colour required:WSS Stainless steel with white interior WPN Pearl nickel with white interior BPC Polished chrome with black interiorBSS Stainless steel with black interior BPB Polished brass with black interior WPC Polished chrome with white interiorWPW Painted white with white interior WPB Polished brass with white interior BBN Black nickel with black interior

Note: All 2 gang sockets include twin earth terminals as standard, enabling high integrity earthing. To aid flush installation 35mm steel boxes are recommended. (BS 7671).

160


13A floor sockets

GU3251WSS

n Dimensions: 88 x 88mm (1 gang), 88 x 148mm (2 gang)n Mounting box: - SB251 (F) 1 gang - SB351 (F) 1 gang - SB252 (F) 2 gang - SB352 (F) 2 gangn Fixed screws: M3.5 x 25mm and 30mmn BS 1363 Part number Description QtyGU3251W** 1 gang unswitched 1GU3252W** 2 gang unswitched 1Floor socket interiors are manufactured from high impact thermoplastic for strength.

16AX plate switches

GU1212BSS

n Dimensions: 88 x 88mm (1-3 gang), 88 x 148mm (4-6 gang)n Mounting box: See selection tablen Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-1n BS EN 60947-3 (GU1213***)Part number Description QtyGU1212*** 1 gang 2 way SP 1GU1212R*** *1 gang 2 way retractive 1GU1222*** 2 gang 2 way SP 1GU1232*** 3 gang 2 way SP 1GU1242*** 4 gang 2 way SP 1GU1262*** 6 gang 2 way SP 1GU1213*** **3 pole isolator 1GU1214*** 1 gang intermediate 1


GU1212TBN

n Dimensions: 88 x 88mm (1-3 gang), 88 x 148mm (4 gang)n Mounting box: - SB161 (F) 1-2 gang - SB251 (F) 3 gang - SB252 (F) 4 gangn Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-1Part number Description QtyGU1212T** 1 gang 2 way 1GU1222T** 2 gang 2 way 1GU1232T** 3 gang 2 way 1GU1242T** 4 gang 2 way 1

Electronic dimmers

GU6000RC1

GU6222EWPB

n Dimensions: 88 x 88mmn Mounting box: Min SB251n Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-2-1n IR remote unit requires remote control (GU6000RC1)n All dimmers can be installed on 2 way and multiway circuitsn For 2 way operating remote switch must be changed for retractive switchn For lamp suitability check the technical section

Part number Description QtyGU6212R*** 1 gang slimline IR remote control 300VA 1


Note: Electronic dimmers are not suitable for use with CFL and LED lamps.* 16A rated ** 10A rated

161


Mains and low voltage dimmer switches

GU6222PB

GU6242LVPC

n Dimensions: 88 x 88mm (1-2 gang), 88 x 148mm (3-4 gang)n Mounting box: - SB251 (F) 1-2 gang - SB352 (F) 3-4 gangn Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-2-1n Supplied with 15mm & 30mm screws

Part number Description QtyMains

GU6211** 1 gang 1 way 400W* 1

GU6212** 1 gang 2 way 400W 1

GU6222** 2 gang 2 way 250W 1

GU6232** 3 gang 2 way 250W 1

GU6242** 4 gang 2 way 250W 1

Low voltage

GU6211LV** 1 gang 1 way 400VA* 1




GU6242LV** 4 gang 2 way 250 VA 1

* 1 way dimmers can be used to replace standard wall switches and retrofit into 16mm mounting boxMains dimmer switches are not suitable on low voltage circuits. See technical section.

20A & 32A DP switches

GU2211WPB

n Dimensions: 88 x 88mmn Mounting box: SB351 (F)n Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-1

Part number Description QtyGU2210*** 20A DP switch 1

GU2211*** 20A DP switch with neon 1

GU2213*** 20A DP switch with flex outlet 1

GU2214*** 20A DP switch with neon and flex outlet 1

GU2214WH*** 20A DP switch with neon and flex outlet marked water heater 1


Note Replace *** with suffix code to denote finish/interior colour required:Note Replace ** with suffix code to denote finish colour required:WSS Stainless steel with white interior WPN Pearl nickel with white interior BPC Polished chrome with black interiorBSS Stainless steel with black interior BPB Polished brass with black interior WPC Polished chrome with white interiorWPW Painted white with white interior WPB Polished brass with white interior BBN Black nickel with black interior

162


GU5214WPN



GU5200*** Unswitched 1

GU5203*** Unswitched with flex outlet 1



GU5213*** DP switched with flex outlet 1



45A DP switches

GU4221BPB

n Dimensions: 148 x 88mmn Mounting box: SB472 (F) n Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-1




GU4201WPN



GU4201*** DP cooker control unit and 13A switched socket with neons 1

Shaver sockets

GU7290WPN

n Dimensions: 148 x 88mmn Mounting box: SB472 (F)n Fix screws: M3.5 x 25mm and 30mmn Unique 47mm flush fittingn BS EN 61558-2-5




163

Blank plates & replacement screws

GU8210SS


Part number Description QtyGU8210** 1 gang 1

GU8220** 2 gang 1

USCREW50** Ultimate screw - M3.5 x 50mm 100



GU7262BBN







TV outlets

GU7210WPN

n Dimensions: 88 x 88mmn Mounting box: SB351 (F) 1-2 gangn Fix screws: M3.5 x 25mm and 30mmn Products are direct connection and are not suitable for common connection.n BS 3041 (where applicable)

Part number Description QtyGU7210*** Single TV/FM socket 1

GU7220*** Twin TV/FM socket 1

GU7230*** Single SAT socket 1


164


Euro modular plates

GU8450PC


Part number Description QtyGU8250** 1 gang euro modular plate 1



Note Replace ** with suffix code to denote plate finish required:SS Stainless steel PC Polished chrome PB Polished brassPN Pearl nickel BN Black nickel PW White metalNote Replace * with suffix code to denote module colour required:W White B Black

Euro modules

GUE7081B

GUE7020B


Part number Description Module size QtyGUE7010* TV/Radio diplexer 2 1







GUE7072W

GUE7020* HDMI 2 1






GUE7075* VGA 1 1





Grid plate

GUG09GSS

Part number Description Dimensions QtyGUG01G** 1 gang 88 x 88mm 1

GUG02G** 2 gang 88 x 88mm 1

GUG03G** 3 gang 88 x 148mm 1

GUG04G** 4 gang 88 x 148mm 1

GUG06G** 6 gang 156 x 156mm 1

GUG08G** 8 gang 156 x 156mm 1

GUG09G** 9 gang 216 x 156mm 1

GUG12G** 12 gang 216 x 156mm 1

GUG18G** 18 gang 398 x 156mm 1

GUG24G** 24 gang 398 x 156mm 1

165

Note Replace ** with suffix code to denote plate finish required:SS Stainless steel PC Polished chrome PB Polished brassPN Pearl nickel BN Black nickel PW White metalNote Replace * with suffix code to denote module colour required:W White B Black






n 10AX & 20AX switch modules available in black or whiten Rocker caps available in all metal finishesn Pre printed rocker caps n Clear terminal marking printed onto grey back mouldings ensures easy identificationn Easy assemblyn BS EN 60669-1


Switch modules

White surround







GUG20DPMW 20AX DP 1

Black surround







GUG20DPMB 20AX DP 1


Metal rocker caps


















Note Replace ** with suffix code to denote finish/interior colour requiredSS Stainless steel PN Pearl nickelPC Polished chrome BN Black nickelPB Polished brass PW Painted whiteBLK Painted black

166

Note Replace *** with suffix code to denote finish/interior colour requiredNote Replace ** with suffix code to denote finish requiredWSS Stainless steel with white interior WPN Pearl nickel with white interior BMS Mirror steel with black interiorBSS Stainless steel with black interior BPB Polished brass with black interior WMS Mirror steel with white interiorWPW Painted white with white interior WPB Polished brass with white interior BBN Black nickel with black interiorBLK Painted black with black interior


GUG20DPKWPW

n BS EN 60669-1











GUGTELMWSS

n Full metal surround on all modules n Easy to fit front locking modulesn BS EN 3041 (where applicable)









167

Wiring accessories


GUGEMDIMWPB16

n Electronic modules are capable of 2 way or multiway dimmingn For lamp suitability check the technical sectionn Min load 60W/50VAn Retractive switch for use with electronic dimmers onlyn Not compatible with moulded grid plates n Modules will require derating when used in multi-gang applicationsPart number Description QtyGUGEMDIM***16 300W/VA universal multiway touch dimmer module 1GUGEMRDIMW16/B16 300W/VA universal multiway touch dimmer module with infra red remote

option (black or white)1

GUGEMW*** 2 way & multiway retractive switch* 1GU6000RC1 1 channel IR remote control 1*50mA max rating


GUG13FCUWMS

n Full metal surround on all modulesn Modules are completely interchangeablen BS 1363 n BS 5733 Part number Description QtyGUG13FCU*** 13A fuse carrier 1GUG16CO*** Flex outlet up to 10mm ø 1GUGBW White moulded blank 1GUGBB Black moulded blank 1GUGB*** Metal finish blank plate 1

Indicator modules

GUGINDWG

n 240Vn BS 5733Part number Description QtyWhiteGUGINDWG Green indicator 1GUGINDWO Orange Indicator 1GUGINDWR Red indicator 1BlackGUGINDBG Green indicator 1GUGINDBO Orange Indicator 1GUGINDBR Red indicator 1

Note Replace *** with suffix code to denote finish/interior colour requiredWSS Stainless steel with white interior WPN Pearl nickel with white interior BMS Mirror steel with black interiorBSS Stainless steel with black interior BPB Polished brass with black interior WMS Mirror steel with white interiorWPW Painted white with white interior WPB Polished brass with white interior BBN Black nickel with black interiorBLK Painted black with black interior

Ultimate flat plate

168

169

The Ultimate range is complemented with the addition of the low profile range. Smooth curved lines with a slim profile and minimal back projection makes an ideal upgrade from white moulded accessories.

Low profile accessories are available in a choice of brushed or polished chrome, with either black or white interiors. The range includes low profile grid plates.

Ultimate low profile

Consumer

Large plate footprint avoids the need for additional decorating on retrofits Consistent profile allows accessories to be mounted adjacently Colour matched flat headed screws and eyelets add that finishing touch Slimline, compact neons for a subtle effect

Installer

Full 16AX fluorescent rating on all plate switches Minimal back projection to allow installation using standard flush mounting boxes for both new and retrofits Smooth tactile switch action incorporating positive drive switch mechanism Metal capped fuse carriers provide more visible metal on the plate Accessories supplied with both long and short screws for installation flexibility Large in-line angled colour coded terminals to aid cable insertion and selection


170

Ultimate low profile Selection table

Wiring accessories

Finishes



Brushed chrome white interior

Brushed chrome black interior

Mounting box depth

13A socket outlets 1G 13A switched GU3510WPC GU3510BPC GU3510WBC GU3510BBC *25/35mm

2G 13A switched GU3520WPC GU3520BPC GU3520WBC GU3520BBC *25/35mm

2G O/B switched GU3530WPC GU3531BPC GU3532WBC GU3533BBC *25/35mm

2G O/B switched + C/E GU3531WPC GU3531BPC GU3531WBC GU3531BBC *25/35mm

5A unswitched round pin GU3580WPC GU3580BPC GU3580WBC GU3580BBC 25mm

16AX plateswitches 1G 2W switch GU1512WPC GU1512BPC GU1512WBC GU1512BBC 16mm

2G 2W switch GU1522WPC GU1522BPC GU1522WBC GU1522BBC 16mm



**1G TP isolator GU1513WPC GU1513BPC GU1513WBC GU1513BBC 25mm

1G intermediate switch GU1514WPC GU1514BPC GU1514WBC GU1514BBC 25mm

Dimmer switches 1G 2W 400W mains GU6512WPC GU6512BPC GU6512WBC GU6512BBC 25mm

2G 2W 250W mains GU6522WPC GU6522BPC GU6522WBC GU6522BBC 25mm


20A DP plateswitches 20A DP switch + flex outlet GU2513WPC GU2513BPC GU2513WBC GU2513BBC 35mm

20A DP switch + neon GU2511WPC GU2511BPC GU2511WBC GU2511BBC 35mm


13A unswitched GU5500WPC GU5500BPC GU5500WBC GU5500BBC 25mm

13A switched GU5510WPC GU5510BPC GU5510WBC GU5510BBC 35mm

13A switched + neon GU5511WPC GU5511BPC GU5511WBC GU5511BBC 35mm

13A switched + neon+ flex outlet GU5514WPC GU5514BPC GU5514WBC GU5514BBC 35mm

45A DP switches 45A 2G DP switch + neon GU4521WPC GU4521BPC GU4521WBC GU4521BBC 35mm


45A DP cooker control unit + 13A switched socket + neon GU4501WPC GU4501BPC GU4501WBC GU4501BBC 47mm

Shaver sockets 115/230V dual voltage GU7590WPC GU7590BPC GU7590WBC GU7590BBC 47mm

Telephone & data outlets Master telephone outlet GU7561WPC GU7561BPC GU7561WBC GU7561BBC *25/35mm

Secondary telephone outlet GU7562WPC GU7562BPC GU7562WBC GU7562BBC *25/35mm

TV outlets Single TV/FM coaxial socket GU7510WPC GU7511BPC GU7512WBC GU7513BBC 25mm

Euro modular plates 1G euro plate GU8550PC GU8550PC GU8550BC GU8550BC **

2G euro plate GU8560PC GU8560PC GU8560BC GU8560BC **


Blank plates 1G blank plate GU8510PC GU8510PC GU8510BC GU8510BC N/A

2G blank plate GU8520PC GU8520PC GU8520BC GU8520BC N/A

* Dependent upon wiring configuration, to aid installation 35mm flush steel boxes are recommended** 10A rated


171

Finishes



Brushed chrome white interior

Brushed chrome black interior

Mounting box depth

13A socket outlets 1G 13A switched GU3510WPC GU3510BPC GU3510WBC GU3510BBC *25/35mm

2G 13A switched GU3520WPC GU3520BPC GU3520WBC GU3520BBC *25/35mm

2G O/B switched GU3530WPC GU3531BPC GU3532WBC GU3533BBC *25/35mm

2G O/B switched + C/E GU3531WPC GU3531BPC GU3531WBC GU3531BBC *25/35mm

5A unswitched round pin GU3580WPC GU3580BPC GU3580WBC GU3580BBC 25mm

16AX plateswitches 1G 2W switch GU1512WPC GU1512BPC GU1512WBC GU1512BBC 16mm




**1G TP isolator GU1513WPC GU1513BPC GU1513WBC GU1513BBC 25mm

1G intermediate switch GU1514WPC GU1514BPC GU1514WBC GU1514BBC 25mm

Dimmer switches 1G 2W 400W mains GU6512WPC GU6512BPC GU6512WBC GU6512BBC 25mm



20A DP plateswitches 20A DP switch + flex outlet GU2513WPC GU2513BPC GU2513WBC GU2513BBC 35mm

20A DP switch + neon GU2511WPC GU2511BPC GU2511WBC GU2511BBC 35mm


13A unswitched GU5500WPC GU5500BPC GU5500WBC GU5500BBC 25mm

13A switched GU5510WPC GU5510BPC GU5510WBC GU5510BBC 35mm

13A switched + neon GU5511WPC GU5511BPC GU5511WBC GU5511BBC 35mm

13A switched + neon+ flex outlet GU5514WPC GU5514BPC GU5514WBC GU5514BBC 35mm

45A DP switches 45A 2G DP switch + neon GU4521WPC GU4521BPC GU4521WBC GU4521BBC 35mm


45A DP cooker control unit + 13A switched socket + neon GU4501WPC GU4501BPC GU4501WBC GU4501BBC 47mm

Shaver sockets 115/230V dual voltage GU7590WPC GU7590BPC GU7590WBC GU7590BBC 47mm

Telephone & data outlets Master telephone outlet GU7561WPC GU7561BPC GU7561WBC GU7561BBC *25/35mm

Secondary telephone outlet GU7562WPC GU7562BPC GU7562WBC GU7562BBC *25/35mm

TV outlets Single TV/FM coaxial socket GU7510WPC GU7511BPC GU7512WBC GU7513BBC 25mm

Euro modular plates 1G euro plate GU8550PC GU8550PC GU8550BC GU8550BC **



Blank plates 1G blank plate GU8510PC GU8510PC GU8510BC GU8510BC N/A

2G blank plate GU8520PC GU8520PC GU8520BC GU8520BC N/A

* Dependent upon wiring configuration, to aid installation 35mm flush steel boxes are recommended** 10A rated


172

Ultimate low profileGrid front plate selection table

Wiring accessories





Front plates are available in a choice of 2 finishes - Polished Chrome, Brushed Chrome.

1 2 3 4 6 8

FlushLow profile Brushed chrome GUGL01BC GUGL02BC GUGL03BC GUGL04BC GUGL06BC GUGL08BC

Polished chrome GUGL01PC GUGL02PC GUGL03PC GUGL04PC GUGL06PC GUGL08PC


GBG01 GBG01 GBG02 GBG02 GBG03 GBG03

Dimensions 76 x 76 42mm 76 x 7642mm

136 x 76 42mm 136 x 76 42mm 136 x 136 42mm 136 x 136 42mm

173

Ultimate low profileWhite interior grid modules

Wiring accessories

Finishes

Mirrorsteel

Painted white




10AX 1 way SP GUG101MW GUGRMS GUGRPW


10AX intermediate SP GUG10IMW GUGRMS GUGRPW


20AX 2 way and off SP GUG2020MW GUGRMS GUGRPW


20AX DP GUG20DPMW GUGRMS GUGRPW


Module


Marked boiler GUG20DPMW GUGRBOMS GUGRBOPW

Marked cooker hood GUG20DPMW GUGRCHMS GUGRCHPW

Marked dish washer GUG20DPMW GUGRDWMS GUGRDWPW

Marked extractor fan GUG20DPMW GUGREFMS GUGREFPW

Marked fridge GUG20DPMW GUGRFRMS GUGRFRPW

Marked fan GUG20DPMW GUGRFAMS GUGRFAPW

Marked freezer GUG20DPMW GUGRFZMS GUGRFZPW

Marked fridge/freezer GUG20DPMW GUGRFRFZMS GUGRFRFZPW

Marked hob GUG20DPMW GUGRHOMS GUGRHOPW

Marked heater GUG20DPMW GUGRHEMS GUGRHEPW

Marked microwave GUG20DPMW GUGRMWMS GUGRMWPW

Marked oven GUG20DPMW GUGROVMS GUGROVPW

Marked tumble dryer GUG20DPMW GUGRTDMS GUGRTDPW

Marked washer dryer GUG20DPMW GUGRWDYMS GUGRWDYPW

Marked waste disposal GUG20DPMW GUGRWDMS GUGRWDPW

Marked washing machine GUG20DPMW GUGRWMMS GUGRWMPW

6AX & 10AX modules

6AX 2 way retractive and centre off switch module GUG202OCWMS GUG202OCWPW

10AX 2 way retractive switch module GUG102RWMS GUG102RWPW

10AX 2 way toggle switch module GUG102TWMS GUG102TWPW

10AX intermediate toggle switch module GUG10ITWMS GUG10ITWPW


20AX DP key switch module GUG20DPKWMS GUG20DPKWPW

20AX 2 way key switch module GUG202KWMS GUG202KWPW

20AX 2 way key switch module marked EMG.LTG GUG202KELWMS GUG202KELWPW

Communication modules Master telephone outlet GUGTELMWMS GUGTELMWPW

Secondary telephone outlet GUGTELSWMS GUGTELSWPW

Single RJ11 data outlet GUGRJ11WMS GUGRJ11WPW

Single RJ45 data outlet GUGRJ45WMS GUGRJ45WPW

Single TV/FM coaxial GUGCOWMS GUGCOWPW

Single satellite GUGSATWMS GUGSATWPW

Electronic dimmer Electronic 300W/VA 2 way & multiway standard dimmer module GUGEMDIMWMS16 GUGEMDIMWPW16

Electronic 300W/VA infra red dimmer module GUGEMRDIMW16 GUGEMRDIMW16

2 way retractive switch GUGEMWWMS16 GUGEMWWPW16

1 channel remote control GU6000RC116 GU6000RC116


13A fused connection unit module GUG13FCUWMS GUG13FCUWPW

Flex outlet (10mm dia) GUG16COWMS GUG16COWPW

Blank modules Blank module metal finish GUGBWMS GUGBWPW





Spares

Hex screws (plate to grid) UHEXSMS UHEXSPW




174

Ultimate low profileBlack interior grid modules

Wiring accessories

Finishes

Mirrorsteel

Painted black




10AX 1 way SP GUG101MB GUGRMS GUGRBLK


10AX intermediate SP GUG10IMB GUGRMS GUGRBLK


20AX 2 way and off SP GUG2020MB GUGRMS GUGRBLK


20AX DP GUG20DPMB GUGRMS GUGRBLK


Module


Marked boiler GUG20DPMB GUGRBOMS GUGRBOBLK

Marked cooker hood GUG20DPMB GUGRCHMS GUGRCHBLK

Marked dish washer GUG20DPMB GUGRDWMS GUGRDWBLK

Marked extractor fan GUG20DPMB GUGREFMS GUGREFBLK

Marked fridge GUG20DPMB GUGRFRMS GUGRFRBLK

Marked fan GUG20DPMB GUGRFAMS GUGRFABLK

Marked freezer GUG20DPMB GUGRFZMS GUGRFZBLK

Marked fridge/freezer GUG20DPMB GUGRFRFZMS GUGRFRFZBLK

Marked hob GUG20DPMB GUGRHOMS GUGRHOBLK

Marked heater GUG20DPMB GUGRHEMS GUGRHEBLK

Marked microwave GUG20DPMB GUGRMWMS GUGRMWBLK

Marked oven GUG20DPMB GUGROVMS GUGROVBLK

Marked tumble dryer GUG20DPMB GUGRTDMS GUGRTDBLK

Marked washer dryer GUG20DPMB GUGRWDYMS GUGRWDYBLK

Marked waste disposal GUG20DPMB GUGRWDMS GUGRWDBLK

Marked washing machine GUG20DPMB GUGRWMMS GUGRWMBLK

6AX & 10AX modules

6AX 2 way retractive and centre off switch module GUG202OCBMS GUG202OCBLK

10AX 2 way retractive switch module GUG102RBMS GUG102RBLK

10AX 2 way toggle switch module GUG102TBMS

10AX intermediate toggle switch module GUG10ITBMS


20AX DP key switch module GUG20DPKBMS GUG20DPKBLK

20AX 2 way key switch module GUG202KBMS GUG202KBLK

20AX 2 way key switch module marked EMG.LTG GUG202KELBMS GUG202KELBBN

Communication modules Master telephone outlet GUGTELMBMS GUGTELMBLK

Secondary telephone outlet GUGTELSBMS GUGTELSBLK

Single RJ11 data outlet GUGRJ11BMS GUGRJ11BLK

Single RJ45 data outlet GUGRJ45BMS GUGRJ45BLK

Single TV/FM coaxial GUGCOBMS GUGCOBLK

Single satellite GUGSATBMS GUGSATBLK

Electronic dimmer Electronic 300W/VA 2 way & multiway standard dimmer module GUGEMDIMBMS16

Electronic 350W/VA infra red dimmer module GUGEMRDIMB16

2 way retractive switch GUGEMWBMS16

1 channel remote control GU6000RC116


13A fused connection unit module GUG13FCUBMS GUG13FCUBLK

Flex outlet (10mm dia) GUG16COBMS GUG16COBLK

Blank modules Blank module metal finish GUGBBMS





Spares





175

Ultimate low profileWiring accessories

13A switched socket outlets

GU3520BPC

n Dimensions: 88 x 88mm (1 gang), 88 x 148mm (2 gang)n Mounting box: - SB251 (F) 1 gang - SB351 (F) 1 gang - SB252 (F) 2 gang - SB352 (F) 2 gangn Fix screws: M3.5 x 25mm and 30mm n BS 1363 Part number Description QtyGU3510*** 1 gang switched 1GU3520*** 2 gang switched 1

13A DP switched socket outlets with outboard rockers

GU3531WPC

Part number Description QtyGU3530*** 2 gang switchedGU3531*** 2 gang switched with clean earth 1GU3532*** 2 gang switched with red neon rockers and clean earthGU3533*** 2 gang switched with clean earth and non-standardGU3534*** 2 gang switched with red neon rockers, clean earth and non-standard


GU3580WBC

n Dimensions: 88 x 88mmn Mounting box: SB251 (F)n Fixed screws: M3.5 x 25mm and 30mm n BS 546Part number Description QtyGU3580*** 5A unswitched 1

16AX plate switches

GU1522BBC

n Dimensions: 88 x 88mm (1-3 gang), 88 x 148mm (4 gang)n Mounting box: - SB161 (F) 1-2 gang - SB251 (F) 3 gang - SB252 (F) 4 gangn Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-1n BS EN 60947-3 (GU1513***)Part number Description QtyGU1512*** 1 gang 2 way SP 1GU1522*** 2 gang 2 way SP 1GU1532*** 3 gang 2 way SP 1

GU1542*** 4 gang 2 way SP 1GU1514*** 1 gang intermediate 1GU1513*** *3 pole isolator 1


GU6522BC

n Dimensions: 88 x 88mm (1-2 gang), 88 x 148mm (3 gang)n Mounting box: - SB251 (F) 1-2 gang - SB352 (F) 3 gangn Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-2-1

Part number Description QtyGU6512** 1 gang 2 way 400W 1GU6522** 2 gang 2 way 250W 1GU6532** 3 gang 2 way 250W 1* 10A rated

Note Replace *** with suffix code to denote finish/interior colour required:Note Replace ** with suffix code to denote finish colour required:WPC Polished chrome with white interior WBC Brushed chrome with white interiorBPC Polished chrome with black interior BBC Brushed chrome with black interior

176


20AX DP switches

GU2511WBC

n Dimensions: 88 x 88mmn Mounting box: SB351(F)n Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-1


GU2511*** DP switch with neon 1

GU2513*** DP switch with flex outlet 1


GU5511BPC


Part number Description QtyGU5500*** Unswitched 1




45A DP switches

GU4521WBC

n Dimensions: 148 x 88mm (2 gang)n Mounting box: SB472 (F) 2 gangn Fix screws: M3.5 x 25mm and 30mmn BS EN 60669-1




GU4501WPC



GU4501*** DP cooker control unit & 13A switched socket with neons 1

Shaver sockets

GU7590WBC

n Dimensions: 148 x 88mmn Mounting box: SB472 (F)n Fix screws: M3.5 x 25mm and 30mmn BS EN 61558-2-5



Special unique design allows perfect fit to 47mm box

Note Replace *** with suffix code to denote finish/interior colour required:WPC Polished chrome with white interior WBC Brushed chrome with white interiorBPC Polished chrome with black interior BBC Brushed chrome with black interior

177



GU7561WPC





TV outlets

GU7510BBC

n Dimensions: 88 x 88mmn Mounting box: SB251 (F)n Fix screws: M3.5 x 25mm and 30mmn Products are direct connection and not suitable for common connectionn BS 3041 (where applicable)


GU7510*** Single TV/FM socket 1

Blank plates

GU8510PC



GU8510** 1 gang 1

GU8520** 2 gang 1

Note Replace *** with suffix code to denote finish/interior colour required:WPC Polished chrome with white interior WBC Brushed chrome with white interiorBPC Polished chrome with black interior BBC Brushed chrome with black interior

Note Replace ** with suffix code to denote finish required:PC Polished chrome BC Brushed chrome

178






n 10AX & 20AX switch modules available in black or whiten Pre printed rocker caps n Clear terminal marking printed onto grey back mouldings ensures easy identificationn Easy assemblyn BS EN 60669-1


Switch modules

White surround







GUG20DPMW 20AX DP 1

Black surround







GUG20DPMB 20AX DP 1


Metal rocker caps


















Note Replace ** with suffix code to denote finish/interior colour requiredMS Mirror steel PW Painted whiteBLK Painted black

179

Note Replace ** with suffix code to denote finish/interior colour requiredMS Mirror steel PW Painted whiteBLK Painted black


GUGRJ45WPW

n Full metal surround on all modulesn 10AX & 20AX ratingsn Tactile switch actionn BS EN 60669-1











GUGRJ45WMS

n Full metal surround on all modules n Easy to fit front locking modulesn BS EN 3041 (where applicable)








Note Replace *** with suffix code to denote finish/interior colour requiredNote Replace ** with suffix code to denote finish requiredBMS Mirror steel with black interior WMS Mirror steel with white interiorBLK Painted black with black interior WPW Painted white with white interior


180



GUGEMDIMWMS16

n Electronic modules are capable of 2 way or multiway dimmingn For lamp suitability check the technical sectionn Min load 60W/50VAn Retractive switch for use with electronic dimmers onlyn Not compatible with moulded grid plates n Modules will require derating when used in multi-gang applicationsPart number Description QtyGUGEMDIM***16 300W/VA universal multiway touch dimmer module 1GUGEMRDIMW16/B16 300W/VA universal multiway touch dimmer module with infra red remote

option (black or white)1

GUGEMW*** 2 way & multiway retractive switch* 1GU6000RC1 1 channel IR remote control 1*50mA max rating


GUG13FCUWMS

n Full metal surround on all modulesn Modules are completely interchangeablen BS 1363 n BS 5733 Part number Description QtyGUG13FCU*** 13A fuse carrier 1GUG16CO*** Flex outlet up to 10mm ø 1GUGBW White moulded blank 1GUGBB Black moulded blank 1GUGB*** Metal finish blank plate 1

Indicator modules

GUGINDWG

n 240Vn BS 5733Part number Description QtyWhiteGUGINDWG Green indicator 1GUGINDWO Orange Indicator 1GUGINDWR Red indicator 1BlackGUGINDBG Green indicator 1GUGINDBO Orange Indicator 1GUGINDBR Red indicator 1

Note Replace *** with suffix code to denote finish/interior colour requiredNote for flat plate & screwless grid plates, replace ** with suffix code to denote finish requiredWPW Painted white with white interior BMS Mirror steel with black interiorBLK Painted black with black interior WMS Mirror steel with white interiorNote for low profile grid plates, replace ** with suffix code to denote finish required BC Brushed chrome MS Mirror steel

181


Note Replace * with suffix code to denote finish:B Black W White

Note Replace ** with suffix code to denote finish required:PC Polished chrome BC Brushed chrome

Euro modular plates

GU8550PC


Part number Description QtyGU8550** 1 gang euro modular plate 1



Euro modules

GUE7081B

GUE7020B


Part number Description Module size Qty

GUE7010* TV/Radio diplexer 2 1







GUE7072W

GUE7020* HDMI 2 1





GUE7075* VGA 1 1







Grid plate

GUGL04BC

Part number Description Dimensions QtyGUGL01** 1 gang 88 x 88mm 1

GUGL02** 2 gang 88 x 88mm 1

GUGL03** 3 gang 88 x 148mm 1

GUGL04** 4 gang 88 x 148mm 1

GUGL06** 6 gang 156 x 156mm 1

GUGL08** 8 gang 156 x 156mm 1

182

Timeless & traditional

Exclusive range

183

This highly successful Exclusive square edge range of white moulded wiring accessories maintains the superb quality and easy to install technical specification with exceptional value for money.

To provide additional safety in residential and commercial applications, the Exclusive white moulded range includes a series of RCD wiring accessories. The range includes both types of RCD - passive/latching and active/non-latching, which behave differently when the circuit is de-energised.

The Exclusive range includes a range of socket outlets; from sockets with outboard rockers, to retrofit converta sockets.

Exclusive square edge white moulded

Consumer

Timeless traditional profile suitable for both domestic and commercial use Oustanding value for money Energy efficient solutions with dimmers, enabling energy savings of up to 30%

Installer

Optional cable outlet facility provides the choice of either surface or flush cable access Plate profiles match across the entire range DP socket outlets provide both easy access to connections together with twin earth terminals for high integrity earthing Easy access generous terminals Full 10AX plate switch rating for fluorescent and inductive loads Residual current devices with active and passive controls for residential and commercial installations


184

Wiring accessories

13A socket outlets

GSKTSW2G

n Dimensions: 86 x 86mm (1 gang), 86 x 146mm (2 gang) n Mounting box: - SB251 (F) 1 gang GPAT1G25 (S) - SB252 (F) 2 gang GPAT2G25 (S)n Fix screws: M3.5 x 30mm n BS 1363n ‘V’ locator socket includes grooves for fast insertion of plug


GSKT1G 1 gang unswitched 10

GSKT2G 2 gang unswitched 5

GSKTSW1G 1 gang switched 10

GSKTSW2G2 2 gang switched 5

GSKTSWDP1G 1 gang DP switched 5

GSKTSWDP2G 2 gang DP switched 1

GSKTSWDPOB2G 2 gang DP switched with outboard rockers 5

GSKTSW2GV 2 gang switched ‘V’ locator 5

13A 3 gang socket outlet

GSKTSW3G(not to scale)

n Dimensions: 86 x 205mmn Mounting box: GPAT3G25 (S) n Fix screws: M3.5 x 30mm n BS 1363


GSKTSW3G 3 gang switched and fused 5

13A 1 to 2 gang converta socket outlet

GSKTSWDP1G2G

n BS 1363


GSKTSWDP1G2G 1 to 2 gang switched 5


GSKT5A1G

n Dimensions: 86 x 86mmn Mounting box: SB251 (F) GPAT1G25 (S) n Fix screws: M3.5 x 30mmn BS 546

Part number Description QtyGSKT2A1G 2A unswitched 10

GSKT5A1G 5A unswitched 10

GSKT15A1G 15A unswitched 10

GSKTSW15A1G 15A switched 10

DP RCD protected socket outlets

LSKT1GR

LSKT2GR

n Dimensions: 86 x 146mm n Mounting box: SB252 (F) GPAT2G25 (S) n Fix screws: M3.5 x 30mm n BS 7288n Electronic latch - active controln Mechanical latch - passive control


LSKT1GR 1 gang RCD 30mA unswitched - active control 1

LSKT2GR 2 gang RCD 30mA unswitched - active control 1

LSKT2GRP 2 gang RCD 30mA unswitched - passive control 1

GMCPRCDSKT1G 1 gang RCD 30mA switched - passive control 1

GMCPRCDSKT2G 2 gang RCD 30mA switched - passive control 1

Active control - device will fail safe in the event of loss of supply. Suitable for domestic use.

Passive control - device will only trip in the event of a fault. Suitable for freezers and commercial applications.



185

Wiring accessories

10AX plate switches

GSW1G2W

n Dimensions: 86 x 86mm (1-3 gang), 86 x 146mm (4 gang)n Mounting box: - SB161 (F) GPAT1G16 (S) 1-2 gang - SB251 (F) GPAT1G25 3 gang - SB252 (F) GPAT2G25 (S) 4 gangn Fix screws: M3.5 x 20mm n BS EN 60669-1n BS EN 60947-3 (GSWIS02)n BS 3676 (GSWTPS)


GSW1G1W 1 gang 1 way 10





GSWISO2 *3 pole isolator 10

GSWTPS *Triple pole switch 10

GSWINT 1 gang intermediate 10

GSW1G2WR *1 gang 2 way retractive 10

GSW1G2WRP *1 gang 2 way retractive marked ‘press’ 10

GSW1G2WRB *1 gang 2 way retractive marked with bell symbol 10

*10A rated

GSWA1G2W

n Dimensions: 33 x 86mm (1 gang), 33 x 148mm (2 gang)n Mounting box: - SBA251A (F) GPAT1G16A (S) 1 gang - SBA252A (F) GPAT2G16A (S) 2 gang n Fix screws: M3.5 x 20mm n BS EN 60669-1


GSWA1G2W 1 gang 2 way architrave 10

GSWA2G2W 2 gang 2 way architrave 10

Slimline rotary dimmers

GD2G1W

n Dimensions: 86 x 86mmn Mounting box: - SB161 (F) GPAT1G16 (S) 1 gang 1 way - SB251 (F) GPAT1G25 (S) 1-2 gang 2 wayn Fix screws: M3.5 x 30mmn For use with incandescent lamps onlyn BS EN 60669-2-1

Part number Description QtyGD1G1W 1 gang 1 way 60-250W* 1

GD2G1W 2 gang 1 way 60-250W 1

GD1G1W4 1 gang 1 way 60-400W* 1

* Ultra slim module for mounting on 16mm box

Push dimmers

GD3G2W

n Dimensions: 86 x 86mm (1 & 2 gang) , 86 x 146mm (3 & 4 gang)n Mounting box: - SB251 (F) GPAT1G25 (S) 1-2 gang - SB252 (F) GPAT2G25 (S) 3-4 gangn Fix screws: M3.5 x 30mmn For use with incandescent lamps onlyn BS EN 60669-2-1

Part number Description QtyGD1G2W 1 gang 2 way 250W 1

GD1G2W4 1 gang 2 way 400W 1

GD2G2W 2 gang 2 way 250W 1




Note Mains dimmer switches are not suitable on LV circuits. See technical section. Soft start low voltage dimmers are only suitable for dimming wire wound laminated, toroidal and some electronic transformers– not suitable for dimming fluorescent or incandescent lamps.

186

Soft start low voltage dimmers

GLVD1G1W4

n Dimensions: 86 x 86mmn Mounting box: - SB161 (F) GPAT1G16 (S) 1 gang 1 way - SB251 (F) GPAT1G25 (S) 1-2 gang 2 way n Fix screws: M3.5 x 30mmn BS EN 60669-2-1


GLVD1G1W Rotary 1G 1 way 60-250VA 1

GLVD1G2W Push 1G 2 way 60-250VA 1

GLVD2G1W Rotary 2G 1 way 60-250VA 1

GLVD2G2W Push 2G 2 way 60-250VA 1

GLVD1G1W4 Rotary 1G 1 way 60-400VA 1

GLVD1G2W4 Push 1G 2 way 60-400VA 1

20AX DP switches

GSWDPN20A

n Dimensions: 86 x 86mm n Mounting box: SB251 (F) GPAT1G25 (S)n Fix screws: M3.5 x 30mmn BS EN 60669-1


GSWDP20A DP 10

GSWDPN20A DP with neon 10

GSWDP20AFO DP with flex outlet 10

GSWDPN20AFO DP with flex outlet + neon 10

GSWDPN20AFOWH DP with flex outlet (marked water heater) 10


GSPUR

n Dimensions: 86 x 86mmn Mounting box: SB251 (F) GPAT1G25 (S) n Fix screws: M3.5 x 30mmn BS 1363


GSPUR *13A unswitched 10

GSPUR3A *3A unswitched 10

GNSPUR *13A unswitched with neon 10

GSWSPUR *13A DP switched 10

GSWNSPUR *13A DP switched with neon 10

GFOPLATE 20A front entry flex outlet plate 10

GSFOPLATE 25A side entry flex outlet plate 10

*optional flex outlet facility

Note Mains dimmer switches are not suitable on LV circuits. See technical section. Soft start low voltage dimmers are only suitable for dimming wire wound laminated, toroidal and some electronic transformers– not suitable for dimming fluorescent or incandescent lamps.

Exclusive square edgewhite moulded

Wiring accessories

Exclusive engraved range20A DP Control switch 13A Fused connection unit

DP switch DP with neon DP with flex outlet

DP with flex outlet & neon

Unswitched Switched Switched with neon

Air conditioner GSWDP20AFOAC GSWDPN20AFOACBoiler GSWSPURBO GSWNSPURBO

Cooker hood GSWSPURCH GSWNSPURCH

Dishwasher GSWSPURDW GSWNSPURDW

Extractor fan GSWSPUREF GSWNSPUREFFan GSWSPURFA GSWNSPURFAFreezer GSWSPURFZ GSWNSPURFZFridge GSWSPURFR GSWNSPURFRFridge/freezer GSWSPURFFZ GSWNSPURFFZHob GSWSPURHO GSWNSPURHOHeater GSWDP20AHT GSWDPN20AHT GSWDP20AFOHT GSWDPN20AFOHT GSPURHT GSWSPURHT GSWNSPURHTMicrowave GSWSPURMW GSWNSPURMWOven GSWDP20AOV GSWDPN20AOVSecurity GSPURSSTowel rail GSWDP20AFOTR GSWDPN20AFOTR GSPURTRTumble dryer GSPURTD GSWSPURTD GSWNSPURTDWasher dryer GSPURWDY GSWSPURWDY GSWNSPURWDYWaste disposal GSPURWD GSWSPURWD GSWNSPURWDWashing machine GSPURWM GSWSPURWM GSWNSPURWM

187

45A DP switches and cooker controls

G45ACCUN

n Dimensions: 86 x 86mm (1 gang), 86 x 146mm (2 gang) n Mounting box: - SB471 (F) 1 gang GPAT1G47 (S) - SB472 (F) 2 gang GPAT2G47 (S) n Fix screws: M3.5 x 30mmn BS 4177 n BS 5733n BS EN 60669-1

Part number Description QtyGCKR45A 45A DP 1 gang 5

GCKRN45A 45A DP 1 gang with neon 5

GCKR45A2G 45A DP 2 gang 5

GCKRN45A2G 45A DP 2 gang with neon 5

G45ACCU 45A Cooker control unit with 13A socket 1

G45ACCUN 45A Cooker control unit with 13A socket and neon 1

G45CX 45A connection unit 10

Shaver socket

GSHVSKT

n Dimensions: 146 x 86mmn Mounting box: SB472 (F) GPAT2G47 (S) n Fix screws: M3.5 x 30mmn BS EN 61558-2-5


GSHVSKT Shaver socket with dual 115/230V output 1

GADAPTSVR Shaver adaptor 1A fuse (fuse to BS 646) 20


GSKTCOAX2G

n Dimensions: 86 x 86mm n Mounting box: SB251 (F) GPAT1G25 (S)n Fix screws: M3.5 x 30mm n BS EN 41003n BS 3041 (where applicable)

Part number Description QtyGTELMAS Single telephone master 10

GTELSEC Single telephone secondary 10

GSKTCOAX Single direct connection TV 10

GSKTCOAX2G Twin direct connection TV 10

Data outlets

GTEL/RJ11

n Dimensions: 86 x 86mm n Mounting box: SB251 (F) GPAT1G25 (S) n Fix screws: M3.5 x 30mm n BS EN 41003

Part number Description QtyGTELRJ11 RJ11 outlet 10

GTELRJ45 RJ45 outlet 10

Blank plates & replacement screws

GBLANK2G

n Dimensions: 86 x 86mm (1 gang), 86 x 146mm (2 gang) n Fix screws: M3.5 x 30mmn BS 5733

Part number Description QtyGBLANK1G 1 gang blank plate 10

GBLANK2G 2 gang blank plate 5


Wiring accessories

188


Wiring accessories

Euro modules

GUE7030W

GUE7010W

GUE7061W


Part number Description Module size QtyGUE7010W TV/Radio diplexer 2 1

GUE7011W Single IEC coax (female) 1 1

GUE7012W Single IEC coax (male) 1 1

GUE7030W Single F type sat 1 1

GUE7040W TV/Sat diplexer 2 1

GUE7081W TV/FM/Sat triplexer 2 1

GUE7082W TV/FM/Sat 1/Sat 2 quadplexer 2 1

GUE7020W HDMI 2 1

GUE7051W RJ11 modem 1 1

GUE7061W Telephone (BT master) 1 1

GUE7062W Telephone (BT secondary) 1 1

GUE7071W RJ45 CAT5e (not screened) 1 1

GUE7072W RJ45 CAT6 (not screened) 1 1

GUE7075W VGA 1 1

GUE7091W LexCom Performance outlet 1 8

GUE7000W 2 x Phono socket 1 1

GUE7001W 2 x Loudspeaker socket 1 1

GUE8010W Blank module 1 5

Surface pattress boxes

GPAT2G25

GPAT1G16

n All moulded pattresses are supplied with earth terminaln BS 5733


GPAT1G16 1 gang 16mm deep 10



GPATDG25 Dual 25mm deep 10



GPAT1G16A 1 gang architrave 16mm deep 20

GPAT2G16A 2 gang architrave 16mm deep 10

Converter pattresses

GPAT2GC25

n GPAT3G25 is for use with GSKTSW3G, see Exclusive moulded section


GPAT2GC25 1-2 gang 25mm deep 5

GPAT3G25 1-3 gang 25mm deep 5

Euro platesPart number Description Qty

GEURO1 1 module 10

GEURO2 2 module 10

GEURO4 4 module 5

189

The Exclusive decorative metal plate range is designed to suit domestic interiors and commercial applications and offers an extensive range of accessories.

The range is available in either Matt Chrome or Polished Chrome finishes, both with white interiors.

Exclusive decorative

Full 10AX plate switch rating for fluorescent and inductive loads Comprehensive range to complete any installation requirement High quality Exclusive interiors used throughout Timeless traditional plate profile suitable for both domestic and commercial use Plate profiles match across the entire range Includes a range of traditional style surface switches


Due to large plate footprint products may not be compatible with flush mounting dual boxes

190

Wiring accessories

13A socket outlets

GEP3520WPC

n Dimensions: 95 x 95mm (1 gang), 95 x 154.5mm (2 gang) n Mounting box: - SB251 (F) 1 gang - SB252 (F) 2 gang n Fix screws: M3.5 x 30mm n BS 1363

Part number Description QtyGEP3550*** 1 gang unswitched 1

GEP3560*** 2 gang unswitched 1

GEP3510*** 1 gang switched 1

GEP3520*** 2 gang switched 1

GEP3580*** 1 gang 5A round pin unswitched 1

10AX plate switches

GEP1532WMC

n Dimensions: 95 x 95mm (1 - 3 gang), 95 x 154.5mm (4 gang)n Mounting box: - SB161 (F) 1 - 2 gang - SB251 (F) 3 gang - SB252 (F) 4 gangn Fix screws: M3.5 x 25mmn BS EN 60669-1 n BS EN 60947-3 (GEP1513***)

Part number Description QtyGEP1512*** 1 gang 2 way 1

GEP1522*** 2 gang 2 way 1



GEP1513*** *3 pole isolator 1

GEP1514*** 1 gang intermediate 1

GEP1512T** 1 gang 2 way toggle 1

GEP1522T** 2 gang 2 way toggle 1

*10A rated


GEP6512PC

n Dimensions: 95 x 95mm (1 - 2 gang)n Mounting box: SB251 (F) 1 - 2 gangn Fix screws: M3.5 x 30mmn BS EN 60669-2-1


GEP6512** 1 gang 2 way 400W 1

GEP6522** 2 gang 2 way 250W 1


GEP6512LVPC

n Dimensions: 95 x 95mm (1 - 2 gang), 95 x 154.5mm (3 - 4 gang)n Mounting box: - SB251 (F) 1 - 2 gang - SB252 (F) 3 - 4 gangn Fix screws: M3.5 x 30mm n BS EN 60669-2-1

Part number Description QtyGEP6512LV** 1 gang 2 way 400VA LV 1

GEP6522LV** 2 gang 2 way 250VA LV 1




Note Mains dimmer switches are not suitable on low voltage circuits. See technical section

Note Replace *** with suffix code to denote finish/interior colour required:Note Replace ** with suffix code to denote finish required:WMC Matt chrome with white interior WPC Polished chrome with white interior

191

Wiring accessories

20A DP switches

GEP2511WMC

n Dimensions: 95 x 95mmn Mounting box: SB251 (F) n Fix screws: M3.5 x 30mm n BS EN 60669-1

Part number Description QtyGEP2510*** DP switch 1

GEP2511*** DP switch with neon 1


GEP5511WMC

n Dimensions : 95 x 95mm n Mounting box: SB251 (F) 1 gangn Fix screws: M3.5 x 30mm n BS 1363

Part number Description QtyGEP5500*** Unswitched 1

GEP5501*** Unswitched with neon 1

GEP5510*** Switched 1

GEP5511*** Switched with neon 1

45A DP switches

GEP4521WPC

n Dimensions : 95 x 95mm n Mounting box: SB471 (F) n Fix screws: M3.5 x 30mm n BS EN 60669-1

Part number Description QtyGEP4520*** DP switch 1

GEP4521*** DP switch with neon 1

45A cooker control unit

GEP4501WPC

n Dimensions: 95 x 154.5mmn Mounting box: SB472 (F)n Fix screws: M3.5 x 30mmn BS 4177

Part number Description QtyGEP4501*** 45A DP cooker connection unit with neon 1

Shaver socket

GEP7590WPC

n Dimensions: 154.5 x 95mmn Mounting box: SB472 (F)n Fix screws: M3.5 x 30mmn BS EN 61558-2-5

Part number Description QtyGEP7590*** 115/230V dual voltage 1


GEP7561WPC

n Dimensions: 95 x 95mmn Mounting box: SB251 (F)n Fix screws: M3.5 x 30mmn BS EN 41003

Part number Description QtyGEP7561*** Master telephone outlet 1

GEP7562*** Secondary telephone outlet 1


Note Replace *** with suffix code to denote finish/interior colour required:WMC Matt chrome with white interior WPC Polished chrome with white interior

192

Exclusive decorativeWiring accessories

TV socket outlets

GEP7510WPC

n Dimensions : 95 x 95mmn Mounting box: SB351 (F)n Fix screws: M3.5 x 30mm n BS 3041 (where applicable)


GEP7510*** Single TV/FM coaxial 1

GEP7521** Diplex outlet 1

GEP7581** Triplex outlet 1

Blank plates

GEP8510PC

n Dimensions: 95 x 95mm (1 gang), 95 x 154.5mm (2 gang)n Fix screws: M3.5 x 30mmn BS 5733


GEP8510** 1 gang blank plate 1

GEP8520** 2 gang blank plate 1

10A traditional style surface switches

363WE


363BR 10A 2 way surface switch - Brown 1

363WE 10A 2 way surface switch - White 1

360WE DP foot switch - White 5

360BK DP foot switch - Black 5

10A traditional dolly style switches

E192030WE


E192030WE 1 gang SP 250V Brass - White Base 1

E192030BK 1 gang SP 250V Brass - Black Base 1

E192030MIBK 1 gang SP 250V Brass Intermediate - Black Base 1

E1920R30WE Ribbed 1 gang SP 250V 2 way Brass - White Base 1

E1920R30MIWE Ribbed 1 gang SP 250V Intermediate Brass - White Base 1

Mounting blocks

E1920MB2PN


E1920MBR1PN 1920 mounting block 1 gang round - Pine 1

E1920MB1PN 1920 mounting block 1 gang square - Pine 1

E1920MB2PN 1920 mounting block 2 gang - Pine 1

Note Replace *** with suffix code to denote finish/interior colour required:Note Replace ** with suffix code to denote finish required:WMC Matt chrome with white interior WPC Polished chrome with white interior

193

Our Exclusive metal clad range has been built to perform. The strong, industrial design supported by a robust technical specification makes this range the perfect choice for a variety of commercial and public buildings.

Popular trends in the domestic market for modern loft style interiors also provide the perfect backdrop for this range which is available in either grey or silver grey finishes.

Exclusive metal clad

Consumer

Comprehensive range Tough and impact resistant Choice of grey and silver grey finishes ideal for commercial spaces and modern domestic interiors

Installer

Easy to install All products are supplied complete with 42mm deep surface mounting box in matching finish Boxes are supplied with a full selection of 20mm knockouts 1 – 24 gang grid cover plates available


194

Exclusive metal cladWiring accessories

*All cover plates are supplied with appropriate grid frames





Front plates are available in a choice of 2 finishes - Metal Clad Grey and Silver.

1 2 3 4 6 8 9 12 18 24

SurfaceMetal clad Metal clad grey GUG01GMC GUG02GMC GUG03GMC GUG04GMC GUG06GMC GUG08GMC GUG09GMC GUG12GMC GUG18GMC GUG24GMC

Metal clad silver GUG01GSMC GUG02GSMC GUG03GSMC GUG04GSMC GUG06GSMC GUG08GSMC GUG09GSMC GUG12GSMC GUG18GSMC GUG24GSMC


Surface mounting

Grey GBG01 GBG01 GBG02 GBG02 GBG03 GBG03 GBG04S GBG04S GBG06S GBG06S

Silver GBGS01 GBGS01 GBGS02 GBGS02 GBGS03 GBGS03 GBGS04S GBGS04S GBGS06S GBGS06S


76 x 76 42mm

136 x 76 42mm

136 x 76 42mm

136 x 136 42mm

136 x 136 42mm

202 x 136 42mm

202 x 136 42mm

334 x 136 42mm

384 x 136 42mm

195

Exclusive metal cladWhite grid switch modules

Wiring accessories

Selection tableDescription Code

6AX & 10AX modules moulded






20AX modules moulded





20AX printedmodules moulded

















20AX secret key modules metal rockers





Communication modules metal rockers














Hex screws (plate to grid) metal clad UHEXSSS




196

Wiring accessories

13A socket outlets

GMCS131SS

n Dimensions: 79 x 79 x 42mm (1 gang), 79 x 139 x 42mm (2 gang)n BS 1363

Part number Grey Silver grey

Description Qty

GMC131S GMCS131S 1 gang unswitched 10

GMC132S GMCS132S 2 gang unswitched 5

GMC131SS GMCS131SS 1 gang switched 10

GMC132SS GMCS132SS 2 gang switched 5

GMC51S GMCS51S 5A round pin unswitched 10

13A DP outboard rocker switched socket outlet ‑ greyn Dimensions: 79 x 139 x 42mmn BS 1363

Part number Description QtyGU3631GMC 2 gang switched with clean earth 1

RCD protected devices ‑ grey

LMCSKT2GR

n Dimensions: 92 x 145 x 49mmn Electronic latch - active controln Mechanical latch - passive controln Passive devices do not require resetting in the event of power failuren BS 7288n LMCSKT1GR requires a 2 gang back box


LMCSKT1GR 1 gang RCD 30mA active control 1

LMCSKT2GR 2 gang RCD 30mA active control 1

LMCSKT2GRP 2 gang RCD 30mA passive control 1

GMCPRCDSKT1G 1 gang switched RCD 30mA passive 1

GMCPRCDSKT2G 2 gang RCD 30mA passive control

GMCPRCDFCU 1 gang fused connection unit RCD 30mA passive 1

Active control - device will fail safe in the event of loss of supply. Suitable for domestic use.Passive control - device will only trip in the event of a fault. Suitable for freezers and commercialapplications.

10AX plate switches

GMC612

n Dimensions: 79 x 79 x 42mmn BS EN 60669-1


Description Qty

GMC612 GMCS612 1 gang 2 way 10



GMCINT GMCSINT 1 gang intermediate 10


197

Wiring accessories


GMCS13SSP

n Dimensions: 79 x 79 x 42mmn BS 1363


Description Qty

GMC13SP GMCS13SP Unswitched 10

GMC13SPN GMCS13SPN Unswitched with neon 10

GMC13SPF GMCS13SPF Unswitched with flex outlet 10

GMC13SPNF GMCS13SPNF Unswitched with neon and flex outlet 10

GMC13SSP GMCS13SSP DP switched 10

GMC13SSPN GMCS13SSPN DP switched with neon 10

GMC13SSPF GMCS13SSPF DP switched with f/outlet 10

GMC13SSPNF GMCS13SSPNF DP switched with neon and flex outlet 10


20A DP switches

GMCS20SN

n Dimensions: 79 x 79 x 42mmn BS EN 60669-1

Part number Gey Silver grey

Description Qty

GMC20S GMCS20S 20A DP 10

GMC20SN GMCS20SN 20A DP with neon 10

45A switches

GMC45S

n Dimensions: 79 x 79 x 42mm (1 gang), 139 x 79 x 42mm (2 gang)n BS EN 60669-1


Description Qty

GMC45S GMCS45S 1 gang DP 10

GMC45SN GMCS45SN 1 gang DP with neon 10

GMC45S2N GMCS45S2N 2 gang DP with neon 5

Note: All products except grid plates are supplied complete with 42mm depth surface mounting box in matching finish. 1 gang box includes 5 x 20mm knockouts, 2 gang box includes 8 x 20mm knockouts

198

Wiring accessories

Blank plates

GMCB1

n Dimensions: 79 x 79 x 42mm (1 gang), 79 x 139 x 42mm (2 gang)n BS 5733n Blank plate supplied with surface mounting box


Description Qty

GMCB1 GMCSB1 1 gang blank plate 10

GMCB2 GMCSB2 2 gang blank plate 5



Surface metal clad grid plates

GUG03GSMC

n BS 5733n Supplied with mounting grid

Part number Grey Silver

Description Qty

GUG01GMC GUG01GSMC 1 module 1










Surface mounting boxes (for grid plates)

GBG01

n All boxes are supplied with 20mm knockouts and earth terminalsn BS 5733

Part numberGrey Silver

Description Qty

GBG01 GBGS01 1-2 gang mounting box 10



GBG04S GBGS04S 9-12 gang mounting box 1

GBG06S GBGS06S 18-24 gang mounting box 1

199

Wiring accessories Exclusive metal clad


GUG20DPKELWPW

20AX secret key modules ‑ painted whites n BS EN 60669-1






Communication modules ‑ painted white n BS EN 41003 n BS EN 3041 (where applicable)

GUGRJ45WPW











GUG101W












200

Indicator modules

GUGINDWR

n 240Vn BS 5733





GUGBW



GUG20DPTDW

20AX DP printed modules ‑ mouldedn Pre printed modules for greater flexibilityn BS EN 60669-1




Wiring accessories Exclusive metal clad

201

The highly successful T2 ceiling accessories range maintains superb quality and easy to install technical specification that has established this design as a firm favourite.

The range includes polycarbonate and safety ceiling accessories. When safety is of the utmost importance the range of safety ceiling accessories from Schneider Electric ensures the supply is completely disconnected until a lamp is fully inserted. Thus the risk of electric shock is minimised, with full double pole switching.

T2 ceiling & accessories

Fully coordinated fully rated T2 range incorporates large footprint for easy installation together with raised mounting feet to assist installation on uneven surfaces Ample wiring space with four knockouts Clear terminals for easy visibility and installation Batten holders and ceiling roses share a common base assembly with 50.8mm fixing centres Pendant lamp holder has integral cord grip to prevent cable pull on terminals The range includes polycarbonate and lamp activated lampholders Full range of accessories including dry lining and conduit boxes


202

Wiring accessories

Batten lampholder

GABAT

n Clear terminals for easy visibility and installationn Ample wiring space with four knockoutsn Large capacity earth terminaln Pendant lamp holder has integral cord grip to prevent cable pull on terminalsn Batten lamp holders (straight and angled) are pre-wiredn BS EN 61184

Part number Description QtyGBAT Pre-wired batten-lampholder 10

GBATC Pre-wired clear base batten-lampholder 10

GABAT Pre-wired angled batten-lampholder 10

GABATC Pre-wired clear base angled batten-lamp holder 10

Fixed terminal batten holder & ceiling rose

GEBAT

n Raised mounting feet assist mounting on uneven surfacesn Batten holders and ceiling roses share a common base assembly. Fixing centres are 50.8mmn Bases also include easy joist mounting facilityn BS EN 61184n BS 67


GEBAT T2 batten holder 3 terminal 10

GRO Ceiling rose 10

GROC Clear base ceiling rose 10

Pendants & lampholder

GPEND6

n High heat resistance (T2 rated) to BS EN 61184:1995. (Batten holders & lamp holders only) n Max lamp rating 150Wn Plunger springs are enclosed in brass sleevesn Zinc plated steel bayonet sleeve for durabilityn BS EN 60598-2-1n BS EN 61184


GPEND6 Pre-wired 6” pendant 10

GPEND6C Pre-wired 6” clear base pendant 10

GPEND9 Pre-wired 9” pendant 10

GPEND9C Pre-wired 9” clear base pendant 10

GLHC Lampholder with integral cord grip 20

Energy saving pendantn Complies with Part L of the building regulations n Build properties must have a fixed proportion of lighting points suitable for compact fluorescent lamps onlyn Requires 1 x 13W 4 pin compact fluorescent lamp (not supplied) or 1 x 18W 4 pin compact fluorescent lamp (not supplied)

Part number Description QtyGESPEND613 13W Energy saving pendant with 6” flex 1

GESPEND618 18W Energy saving pendant with 6” flex 1

Polycarbonate ceiling accessories

E93PS6WE

Part number Description QtyE93PS6WE Pendant set, 6 inch, white 1

E93PS9WE Pendant set, 9 inch, white 1

E93WE Ceiling rose, white 1

E94WE Batten holder, white 1

E501SSWE Lamp holder, short skirt 1

T2 ceiling & accessories

203

Safety ceiling accessories

GBATS

n T2 Ratedn Mains supply is disconnected until lamp is fully inserted.n DP switching mechanism for complete isolationn Terminals can only be accessed via tooln BS EN 61184n BS 7895

Part number Description QtyGBATS Pre-wired safety batten lamp holder 10

GPEND6S 6" safety pendant lamp holder 10

GLHCS Safety lamp holder with integral cord grip 10

Ceiling switches

GSWPULL45N

n All items have 1.5m white nylon cordn GSWPULL6 and GSWPULL62 fit BESA boxes with standard 50.8mm centre distances between the fixingsn Fully rated at 6AX for fluorescent or inductive loadsn 45A suitable for use as an isolator switchn BS EN 60669-1

Part number Description QtyGSWPULL6 6AX 1 way 10

GSWPULL62 6AX 2 way 10

GSWPULL45 45A double pole 1 way 10

GSWPULL45N 45A double pole 1 way with neon 10

Wiring accessories T2 ceiling & accessories

204

Junction boxes (white or brown)

GJB5ABR

GJB620A

n Dimensions: 5A & 20A – Ø74mm, 30A – Ø85mmn Terminal capacity: 5A 4 x 1.5mm2, 20A 2 x 2.5mm2, 30A 4 x 4mm2

n BS EN 60670-22


GJB5ABR 5A 4 terminal selective entry 4 x 1.5mm 10

GJB20ABR 20A 4 terminal selective entry 3 x 2.5mm 10

GJBN20ABR 20A 4 terminal non-selective entry 3 x 2.5mm 10

GJB620ABR 20A 6 terminal selective entry x 2.5mm 10

GJB30ABR 30A 3 terminal selective entry x 4mm 10

GJBN20ASBR Compact 20A 4 terminal non-selective entry 59mm diameter 10

25mm deep breakaway boxesn Material: uPVCn Colour: whiten BS 4662n All boxes can be used with both standard and coiled miniature trunking n Note: Please see details relating to thermal expansion


MMB251W 1 gang 10

MMB252W 2 gang 10

MMB252SW 2 gang side entry 10

Standard boxes accept 16 x 16mm and 25 x 16mm mini. Reducer kits for other sizes available on request.

Deep boxes with mini entries Part number Description QtyRounded corners

TBR321W 1 gang 10

TBR322W 2 gang 10

Square corners

TBU321W 1 gang 10

TBU322W 2 gang 10

TBU441W 1 gang 10


205


Mini entry adaptersFor use with TBU and TBR boxes


MTAU1W 16 x 16mm 10

MTAU2W 25 x 16mm 10

MTAU3W 38 x 16mm 10

Ceiling rose boxPart number Description QtyCRA12W 16 x 16mm to 25 x 16mm entries, fixing centre 50.8mm

Overall diameter 82mm, depth 13.5mm25

Conduit boxes ‑ square cornersPart number Description QtyKBS252W 2 gang knockout 25mm deep 10

KBU321W 1 gang knockout 32mm deep 10

KBU322W 2 gang knockout 32mm deep 10

PBU441W Plain 44mm deep 10

KBU441W Knockout 44mm deep 10

Note: Square cornered boxes still have infill corners to take round corner plates if required

Conduit boxes ‑ round cornersPart number Description QtyKBR251W 1 gang knockout 25mm deep 20

PBR332W 2 gang plain 32mm deep 20

KBR321W 1 gang knockout 32mm deep 20

KBR322W 2 gang knockout 32mm deep 20

206


Circular dry lining boxn Quick and simple to install n Suitable for pendant drops, smoke alarms etc n Maximum weight support is 3kg at 60°Cn 2 knockouts - both 20mmn Overall diameter 67mmn M3.5 x 30mm required


CRB2W 50.8mm fixing centre 10

Dry lining boxes

GDL1

n Can be installed on thin wall sectionn Ideal for plasterboard n Minimum and maximum thickness 2 - 17mmn BS 5733


GDL1 1 gang 34mm deep 10

GDL2 2 gang 34mm deep 10

Flush galvanised steel boxes

SB161

n All galvanised steel accessory boxes are supplied with earth terminal and screwn Supplied with fixed and adjustable lugsn Fitted with selection of 20mm knockouts in sides and back of boxesn BS 4662

Part number Description QtySB161 1 gang 16mm deep 20

SB251 1 gang 25mm deep 10






Plugs & adaptors

TOP13A

n BS 1363 (13A plugs)n Uses fuse to BS 1361n BS 546 (round pin plugs)n Round pin plugs unfused

Part number Description QtyTOP2AR 2A round pin plug 20

TOP5AR 5A round pin plug 20

TOP15AR 15A round pin plug 20

TOP133A Plug top fitted with 3A fuse 20

TOP13A Plug top fitted with 13A fuse 20

ADAPT2W 2 way unfused adaptor 10

ADAPT3WF 3 way fused adaptor 10

400112 3A BS1362 fuses, 4 pack 1

400113 5A BS1362 fuses, 4 pack 1

400114 13A BS1362 fuses, 4 pack 1

207

Moulded enclosuresDimensions (LxWxD)mm Size code - 80 x 40mm 1 - 80 x 80 x 40mm 2 - 100 x 100 x 50mm 3 - 120 x 80 x 50mm 4 - 150 x 110 x 70mm 5 - 190 x 140 x 70mm 6 - 240 x 190 x 90mm 7 - 300 x 220 x 120mm 8 - 380 x 300 x 120mm 9

Part number Size code No. of entries QtyPlain ‑ IP56

GE115P 3 6 1

GE125P 4 6 1

GE157P 5 10 1

GE197P 6 10 1

GE249P 7 12 1

GE321P* 8 12 1

GE381P* 9 12 1

Stepped glands ‑ IP56

GE84S** 1 4 1

GE884S** 2 6 1

GE115S 3 6 1

* Hinged lid** IP44 rating

Internal back platesPart number Size code QtyGEBP6 6 1

GEPB7 7 1

GEBP8 8 1

GEBP9 9 1

T2 ceiling & accessoriesWiring accessoriesWiring accessories

208

Sensitive sensors

209

By leveraging state of the art infra-red, and combined ultrasonic and infrared (dual technologies), our ultra sensitive occupancy sensors offer you the ultimate in reliable, efficient and cost effective lighting control.

This provides a quick and environmentally friendly way of reducing energy consumption with easy setup. Compared to a traditional manual switch, there are significant potential energy savings that can be achieved by utilising occupancy sensors.

The Schneider Electric occupancy sensor range, combines a selection of outdoor passive infra-red devices, and indoor ceiling or wall mountable devices.

Occupancy sensors

Consumer Delivers measurable energy savings. Solutions which are complementary to the Ultimate screwless flat plate range of wiring accessories. A range of technologies for effective detection of different installations.

Installer Passive infra-red and ultrasonic technologies for different applications. Optional programming from infra-red remote control Suitable for use with different lighting loads (incandescent, AC halogen, LV halogen, fluorescent).


210

Wiring accessories

Ceiling mounted sensorsn Surface or flush mount (SAEUEMSCDBWE flush mount only)n 7m at 2.5m height range (SAEUEMSCUWE 12m x 18m at 2.5m height range)

Technical overview

Description SAEUEMSCUWE SAEUEMSCSAWE SAEUEMSCDBWE

For more information please contact us on 0870 608 8 608

Product Description Flush/Surface Mount Single Load 360° Movement Sensor

Flush/Surface Mount Single Load 360° Movement Sensor

Flush Mount Dual Load 360° Movement Sensor

Field of view 360° 360° 360°

Range PIR: about Φ8m; ULT: an ellipse of 12m×18m at 2.5M height.

7M at 2.5M height 7M at 2.5M height

Mounting Ceiling (Surface / Flush) Ceiling (Surface/Flush) Ceiling (Flush-mount)

Single or Dual Load: Single Single Dual

IR Remote Control* SAEUEMSIR10T SAEUEMS1RWE

incandescent 2000W 2000W 2000W

halogen lamps 230V 1000W 1000W 1000W

halogen w. Electronic transformer

1000VA 1000VA 1000VA

fluorescent tubes 900VA/100μF 900VA/100μF 900VA/100μF

Energy Saving lamps 900VA 900VA 900VA

Other loads than lighting 10A Not allowed 5A

IP class IP20 IPX0 sensor IP40 , power box IP20

Time setting Time 1 (for lighting): Adjustable from 5 sec to 20 min

5 sec to 20 min Time 1 (for lighting): Adjustable from 5 sec to 20 min

Time 2 (for HVAC): Adjustable from 10 sec to 60 min


Test Mode Yes - Test (2sec on, 2sec off) & (short impulse: 1 sec on, 9 sec off)

Yes - Test (2sec on, 2sec off) & (short impulse: 1 sec on, 9 sec off)

Yes - Test (2sec on, 2sec off) & (short impulse: 1 sec on, 9 sec off)

Lux setting 10 Lux to 2000 Lux 10 Lux to 2000 Lux 10 Lux to 2000 Lux

Operating temp range 0oC to 50oC 0oC to 45oC 0oC to 45oC

Connection 3-wires 3-wires 3-wires

Parallel connection of detectors

Yes Yes Yes

Switching modes Auto/Off Manual on N/a

Product Dimensions Ø111.5 x 72mmØ111.5 x 43.5mm (flush)68mmØ Cut-out

Ø111.5 x 59mmØ111.5 x 30mm (flush)65mmØ Cut-out

Ø80 x 16.5mm(H)65mmØ Cut-out

Load

SE7124

SE7124 NOV 10

Single Load

PIR / Dual

Technology

PIR

Dual

Single Load / Dual Load

Flush Mount

Dual Load

Surafce Mount / Flush Mount

* IR remote control available 2011

SAEUEMSCUWE

Part number Description QtySAEUEMSCUWE Single-load 360° PIR and ultrasonic sensor 1

SAEUEMSIR10T IR Remote for SAEUEMSCUWE 1

SAEUEMSCSAWE Single-load 360° PIR sensor 1

SAEUEMSCDBWE Dual-load 360° PIR sensor 1

E751

n Surface mount n Detection area 6m x 6m at 2.4m height range

Part number Description QtyE751 Infrascan single-load 2A 120° PIR sensor 5

E751R Infrascan single-load 10A 120° PIR sensor 5

Ceiling

Floor Scanned areavertical plane

Scanned areahorizontal plane

120º head rotation

120º

8.5m

appro

x

90º viewing angle Detection area 6 x 6 metres

Field of view:

90º90º

Ceiling



120º head rotation

120º

8.5m

appro

x


Field of view:

90º90º

Ceiling



120º head rotation

120º

8.5m

appro

x


Field of view:

90º90º

Wall mounted PIR plate switch

GUPA1411BSS

n Field of view: 90° n Range: 5m at 1.2m height n Time setting: 15sec - 30min n Stainless Steel finish with black interior

Part number Description QtyGUPA1411BSS 1 gang 1 way PIR plate switch with override 1

GUP1411BSS 1 gang 1 way PIR plate switch 1

Occupancy sensors indoor solutions

211

Wiring accessories

Outdoor PIR detectors

CCT56P008

E750WPRGY

n Detection field up to 18 metresn Includes seperate mounting basen Base includes conduit entriesn Suitable for wall or ceiling mounting

Part number Description QtyCCT56P004 Single-load PIR 120° detector 1

CCT56P008 Single-load PIR 360° detector 1

E750WPRGY Infrascan single-load PIR 110° detector 5

110º @ 15m

18m8m4m1.2m

Optimum“approach path”


2.4m

5ºtilt

110º @ 15m

18m8m4m1.2m



2.4m

5ºtilt

Occupancy sensors outdoor solutions

212

213

The E-Series range of wiring accessories is made of high impact resistant polycarbonate components. Besides incorporating a modular design and multi-gang capability, it consists of flush plates that are further enhanced with specially designed screw caps that conceal all mounting screws.

E-Series switches and sockets are tough, resilient, built to take hard knocks and guaranteed to provide exceptional product life.

E-Series mechanisms are designed to international safety standards and areavailable in single or double pole versions. These mechanisms provide greaterinstallation flexibility.

E-Series polycarbonate

Wiring accessories Comprehensive product offer Virtually indestructible front plates Any mechanism can be fitted to switch plates UV stable Outboard rockers as standard

Plates & mechanisms The wide choice of mechanisms fit E-Series plates Mechanisms clip into front plates for fast installation Any combination possible to tailor bespoke requirements Rockers are manufactured from virtually indestructible polycarbonate Blank plugs are available for unused apertures


214

Wiring accessories

13A unswitched socket outlets

E426WE

n BS 1363

Part number Description QtyE426WE 1 gang 3 pin socket outlet 1

13A SP switched socket outlets with outboard rockers (2 gang)

E15WE

E15NWE

n BS 1363


E15WE 1 gang 3 pin switched socket outlet 1

E15NWE 1 gang 3 pin switched socket outlet with neon 1

E25WE 2 gang 3 pin switched socket outlet 1

E25NWE 2 gang 3 pin switched socket outlet with neon 1

13A DP switched socket outlets

E15DWE

n BS 1363


E15DWE 1 gang DP switched socket 1

13A DP switched sockets with ‘HI’ earth and outboard rockers

E25DWE

n BS 1363

Part number Description QtyE25DWE 2 gang DP switched with high integrity earth 1

13A clean earth socket outlets with outboard rockers

E25CESFNWE

E25SFWE

n BS 1363

Part number Description QtyE25CESFNWE 2 gang clean earth filtered switched socket outlet

with surge protection and neon1

E25SFWE 2 gang switched socket with surge protection 1

E25CESFWE 2 gang switched socket with surge protection and filtered clean earth 1

5A round pin unswitched socket outlets

E4265WE

n BS 546

Part number Description QtyE4265WE 1 gang 3 pin socket outlet 1

E-Series polycarbonate

215

IP54 wall switch

E31WP23SAWE

n BS 5733


E31WP23SAWE 1 gang 2 way switch IP54 1

E31WPWE Wall plate to accept mechanisms 1

6A TP fan isolator

E30T6AWE

n BS EN 60947-3


E30T6A 250V TP fan isolator 1

Time delay switch

E319WE

n Adjustable up to 20 minutesn Can be used in multiple switch configurationsn Suitable for staircases and corridorsn IEC 60669-2-1

Part number Description QtyE319WE 10A 1 gang pneumatic 1

10A architrave switches

30WE

n BS EN 60669-1

Part number Description Qty30WE 1 gang 2 way 1

10A wall switches

E311SAWE

E342SAWE

n BS EN60669-1

Part number Description QtyE311SAWE 1 gang 1 way 1

E312SAWE 1 gang 2 way 1

E31IAWE 1 gang intermediate 1

E322SAWE 2 gang 2 way 3 terminal 1

E332SAWE 3 gang 2 way 3 terminal 1

E342SAWE 4 gang 2 way 1

Rotary dimmer

E31RD400WE

n BS EN 60669-2

Part number Description QtyE31RD400WE 240V 400W 1 gang 1 way dimmer 1

Wiring accessories E-Series polycarbonate

216

20A DP flush switches

E32D20NGEWE

n BS EN 60669-1

Part number Description QtyE31D20GEWE 1 gang DP 1

E32D20NGEWE DP with neon & bottom cable outlet 1


E30FSGWE

n BS 1363


E30FSGWE Unswitched 1

E30FSGNWE Unswitched with neon indicator 1

E31DFSGWE Switched 1

E31DFSGNWE Switched with neon indicator 1

45A DP switches

ED45NWE

n BS EN 60669-1


ED45WE DP switch 1

ED45NWE DP switch with neon 1


ED4513NWE

n BS 4177

Part number Description QtyED4513NWE DP switch & 13A switched socket outlet with neon indicator 1


217

Universal shaver socket outlet

E727WE

n BS EN 61558-2-5

Part number Description QtyE727WE 115V 240V shaver unit 1

Telephone outlets

E34061MWE

n BS EN 41003

Part number Description QtyE34061MWE Single master telephone 1

E34061SWE Single secondary telephone 1

ET01E US style telephone 1

TV outlets

E32TV75WE

n BS 3041

Part number Description QtyE31TV75WE Single co-axial 1

E32TV75WE Twin co-axial 1

E31TVFWE Single ‘F’ type satellite connector 1


Blank plates

E31XWE

n BS 5733

Part number Description QtyE31XWE 1 gang blank flush plate 1

E312XWE 2 gang blank flush plate 1

Surface patresses

ET238WE

n BS 1363


701WE 1 gang architrave 1

E238WE 1 gang 35mm 1

ET238WE 2 gang 35mm 1

218


13A switched Converta socket outletsn Polycarbonate construction providing high levels of impact resistancen Double pole isolation on 2 into 3 version onlyn High integrity earthing as standardn BS 1363


E251WE 1 into 2 switched 1

E251BP 1 into 2 switched blister packed 1

E25DF32WE 2 into 3 switched 1

E25DF32BP 2 into 3 switched blister packed 1

n Private or public sector, domestic or commercial applications

n Allows 2 gang socket to fit on 1 gang box or 3 gang socket to fit on 2 gang box

n Quick and easy replacement

n Saves time and money

n Reduces the need for redecorating

n Virtually indestructible polycarbonate front plate

n Dual earth for easy installation

Converta wiring accessories are an ideal retrofit component for existing installations. They allow single to double, or double to triple conversion of standard flush-mounted wiring accessories without the need for additional cabling or chasing.

1 to 2 gang 2 to 3 gang

219

Wiring accessories E series polycarbonate plates and mechanisms

Wall plates

E32WE

n BS 5733

Part number Description QtyE31WE 1 gang flush plate 1

E32WE 2 gang flush plate 1




ET36WE 6 gang flush plate 1

32WE 2 gang architrave plate 1

E31WPWE IP54 1 gang plate for mechanisms 1

Switch mechanisms

30MD20WE

301SMWE

n BS 60669-1


301SMWE 10A 1 way 2 terminal 1

302SMWE 10A 2 way 3 terminal 1

30MIWE 10A intermediate switch module 1

39MWE 10A 4 terminal 3 position ‘LO-OFF-HI’ 1

30FLM15WE 15A switch mechanism (For fluorescent loads only ) 1

30M20WE 20A 2 way 4 terminal 1

30MD20WE 20A DP 1

30TKMWE 20A 2 way toggle key actuated 1

30M35WE 35A 2 way 4 terminal 1

Bell push mechanisms

30MBPNWE

n BS 60669-1


30MBPWE 15A 440V bell push button - White 1

30MBPNWE 15A 250V push button with neon - White 1

30MBPRWE 10A bell press button marked ‘PRESS’ - White 1

Neon indicator, light mechanisms, fuse units and surge protection

30NRD

n BS 5733n BS 5518n BS 1363

Part number Description Qty30NRD 250V neon indicator - Red 1

30NGR 250V neon indicator - Green 1

32E450LMWE 400VA dimmer to suit low voltage transformer - White 1

32E450TMWE 400VA dimmer to suit low voltage transformer trailing edge - White 1

30FSWE 13A fuse carrier - White 1

30SFMOP Surge Filter 1

30RJ45SMA5SHWE

TV & data outletsPart number Description Qty

30RJ45SMA5SHWE CAT5 mechanism with shutter - White 1

30RJ45SMA6SHWE CAT6 mechanism with shutter - white 1

30TV75MSWE 75 ohm crimp type - screw fixed TV antenna socket 1

30PFMWE F type satellite connector - white 1

9WE

Screw and capsPart number Description Qty

31J Securing screws for mechanisms 10

9WE Plain screw caps - White 10

30PWE Moulded removable plugs - plain 1

220

221

Our weatherproof range are tough, durable options for outdoor or more arduous environments. Socket outlets are IP66 or IP55 rated for even greater weather resistance.

The smooth, curved design also delivers on aesthetic appeal whilst providing a high performance application. The range is available as 1 to 3-gang switches, 20AX switches and 1 to 2-gang sockets, together with an RCD protected 2-gang socket outlet for essential personal protection.

Weatherproof IP66 & IP55

Consumer

Smooth, curved aesthetic design Manufactured from tough, durable thermoplastic IP66 for maximum weatherproof protection whilst in use IP55 for general outdoor weatherproof protection

Installer

Standard knockouts for 20mm conduit entry with additional cut-out facility to convert to 25mm conduit entry IP66 sockets accept standard 13A plugs including moulded on plugs Switches can be operated through membrane, thereby maintaining full IP rating


222

Wiring accessories

IP66 – 13A socket outlets

GWPIU3020

n BS 1363n IP66 maintained whilst in use

Part number Description QtyGWPIU3050 1 gang unswitched 1

GWPIU3060 2 gang unswitched 1

GWPIU3020 2 gang switched 1

IP66 – 13A RCD socket outlets

GWPIU3020R

n BS 7288n IP66 maintained whilst in use

Part number Description QtyGWPIU3020R 2 gang RCD 30mA - active 1

GWPIU3020RP 2 gang switched RCD 30mA Passive Passive devices do not require resetting in the event of power failure

1

IP66 grid enclosure & grid modules

GWP9000

n BS 5733 n BS EN 60670

Part number Description QtyGWP9000 2 module enclosure 1

GWPIUKIT IP66 seal kit 2 x silicone seals + 2 x mounting brackets 1

Weatherproof grid modules

n Standards (Where applicable) BS EN 60669-1, BS1363, BS 5733n Key switch is supplied with common key

GRL2020PW 20AX 2 way and off switch module 1

GRL202KPW 20AX 2 way key switch module 1

GRL20DPNPW 20AX DP switch module with neon 1

GRL20DPKPW 20AX DP key switch module 1

GRL13FCUPW 13A SP Fuse carrier 1

GRLINDRPW 240V Red indicator 1

GRLCOPW Cord outlet module (10mm dia.) 1

WeatherproofIP66

223

Wiring accessories

IP55 – 10AX switches

GWP1632

n BS EN 60669-1

Part number Description QtyGWP1612 1 gang 2 way 1

GWP1622 2 gang 2 way 1

GWP1632 3 gang 2 way 1

GWP1614 1 gang intermediate 1

IP55 – 20AX switches

GWP2011

n BS EN 60669-1

Part number Description QtyGWP2010 DP 1

GWP2011 DP with neon 1

WeatherproofIP55

IP55 ‑ 13A socket outlets

GWP3020

n BS 1363

Part number Description QtyGWP3050* 1 gang unswitched 1

GWP3060* 2 gang unswitched 1

GWP3010* 1 gang switched 1

GWP3020* 2 gang switched 1

*IP4X whilst socket is in use

224

Wiring accessories WeatherproofIP55


E551SS

n IEC 60529

Part number Description QtyE551US 13A 1 gang unswitched socket 1

E551SS 13A 1 gang switched socket 1

E552US 13A 2 gang unswitched socket 1

IP55 ‑ 10AX switches

E5512S

Part number Description QtyE5512S 10AX 1 gang 2 way switch 1

E5522S 10AX 2 gang 2 way switch 1

E55PB 10AX retractive switch 1

IP55 ‑ enclosure and grommets

E55CB

Part number Description QtyE55CB Connection box 1

E55GP Grommets (pk 10) 1

225

Kavacha weather protected accessories are made of heat resistant polycarbonate and utilise insulated screws for safe mounting on metal structures. They incorporate weatherproof gaskets that guarantee tight sealing to prevent penetration of water, as well as locking facility for safety purposes.

Kavacha

Switches

A safety feature for mounting switches to metal structures is the insulating caps that cover base mounting screws to totally protect them from any live cables

Impact resistant base and cover can both be subjected to violent collisions. They are sealed with 1 piece of weatherseal gasket

Lever is pad-lockable in the “OFF” position For spilt-type air-conditioner, pump and any motor applications

Sockets

Usable with normal home appliance electrical plugs Protection shield for socket outlet to ensure IP rating is maintained even when it is

plugged Drainage holes prevent accumulation of water droplets due to condensation Large press dolly, easy lift cover For swimming pool, garage, balcony and any outdoor utility areas


226

Wiring accessories Kavacha


CSO313

n IEC 60529n IEC 60669-1n BS 1363 n BS 1363-2

Part number Description QtyCSC313 13A switched socket 1

CSO313 13A 250V unswitched socket 1

CSO3132 13A 250V twin unswitched socket 1

IP66 ‑ switches

CSW1202

n IEC 60669-1

Part number Description QtyCSW120 16A 250V 1 gang 2 way switch with looping terminal 1

CSW1202 20A 250V 2 gang 2 way switch with looping terminal 1

CSW220 20A 500V 1 gang DP isolator switch 1

TP control switches

WHB340RG

n IEC 60529

Part number Description QtyWHB320RG 20A 440V TP surface mount isolator grey 1

WHB340RG 35A 440V TP surface mount isolator grey 1

WHB355RG 55A 440V TP surface mount isolator grey 1

WHC363RG 63A 440V TP surface mount isolator grey (32mm conduit entry each end) 1

227

Designed to satisfy customer needs, precisely engineered and carefully manufactured, the 56 Series is as versatile as your customers’ requirements. Industrial switchgear, being one of the most important components of industry, has to be tough, safe, and able to take hard knocks and give reliable performance under adverse conditions.

The 56 Series has satisfies these challenges with the use of durable engineering plastics. The 56 Series has been tested for protection against ingress of water and dust to international protection ratings IP56, and in many instances exceeds this level of protection.

Industrial switchgear 56 Series

Switches

Chemical resistant for arduous environments The aesthetic appearance of the 56 Series makes it the ideal choice for installation in

commercial facilities such as television studios, shopping centres and warehouses 56 Series products are just as acceptable alongside a public or domestic swimming pool Sockets

Quick, easy and safe wiring Hi-impact polycarbonate materials proven and tested to operate in extreme

temperatures from -40°C to +55°C Specially formulated chemical resistance – resistant orange specifically designed for

environments where harsh chemicals are used Solvent bonding capability Greater UV resistance Modules making assembly simple


228

What suits one industry might not be the perfect match for another. That’s why the 56 Series was specifically designed to mix and match. There is an extensive choice of modules available, including switches, sockets and residual current devices.

56 Series mounting enclosures range from 1 to 9 gang. This allows assemblies to be customised - from a simple switch station to a large electrical control panel.

Accessories can be ordered without the back box by choosing the product code with LE (less enclosure) towards the end.

Designed to mix and match

Captive stainless steel combination head fixings for corrosion resistance and effortless installation

8mm Padlock ON/OFF facility

Rotary ON/OFF switch

Permanent laser engraved ratings and specifications are durable & clearly displayed.

Redesigned transparent socket cover for improved visibility, strength & accessibility.

Larger and easy-to-use latch design. Socket cover automatically closes to ensure IP rating is maintained. Padlocking option available.

229

Wiring accessories 56 Series

IP66 ‑ 13A socket outlet

56SO313LEGY

n IEC 60529n BS 1363

Part number Description Qty56SO313GY 13A 250V 3 pin socket outlet with enclosure - Grey 1

56SO332GY 32A 240V socket outlet with enclosure - Gre 1

56SO520LEGY 20A 220/250V 5 pin surface socket outlet - Grey 1

56SO313LEGY 13A 250V 3 pin surface socket outlet - Grey 1

56SO313RO 13A 250V 3 pin surface socket outlet - Resistant Orange 1

56C3134ELGY 13A 250V 1 gang socket with RCD protection - Grey 1

56C31324ELGY 13A 250V 2 gang socket with RCD protection - Grey 1

56CV313LEGY 13A 250V 1 gang combination surface switched socket outlet 1

IP66 ‑ fuse units

56FCULEGY

n IEC 60529

Part number Description Qty56FCULEGY 15A 250V switched fused spur - Grey 1

IP66 ‑ rotary switch n IEC 60669-1n IEC 60529

Part number Description Qty56SW110GY 10A 240V 1 way rotary switch with enclosure - Grey 1

56SW110LEGY 10A 250V 1 way rotary switch - Grey 1

56SW110LERO 10A 250V 1 way rotary switch - Resistant Orange 1

56SW120LEGY 20A 250V rotary switch - Grey 1

56SW120LERO 20A 250V rotary switch - Resistant Orange 1

56SW132LEGY 32A 250V rotary switch - Grey 1

IP66 ‑ DP switch disconnector n BS EN 60947-3

Part number Description Qty56SW220LEGY 20A 500V DP switch disconnector - Grey 1

56SW220LERO 20A 500V DP switch disconnector - Resistant Orange 1

56SW232LEGY 32A 500V DP switch disconnector - Grey 1

56SW232LERO 32A 500V DP switch disconnector - Resistant Orange 1

56SW120LEGY

56SW220LEGY

230

IP66 ‑ TP switch disconnector n BS EN 60947-3

Part number Description Qty56SW310LEGY 10A 500V TP switch disconnector - Grey 1

56SW320LEGY 20A 500V TP switch disconnector - Grey 1

56SW320LERO 20A 500V TP switch disconnector - Resistant Orange 1






IP66 ‑ control switchesn IEC 60669-1n IEC 60529

Part number Description Qty56SSW10LEGY 10A 250V single sliding dolly switch - Grey 1

56SSW15LEGY 15A 250V single sliding dolly switch - Grey 1

56SSW15LERO 15A 250V single sliding dolly switch - Resistant Orange 1

56SSW210LEGY 10A 250V 2 way switch - Grey 1

56SSW215LEGY 15A 250V 2 way switch - Grey 1

56SW220COLEGY 20A 500V DP changeover & reversing switch - Grey 1

56SW420LEGY 20A 440V 4 pole switch - Grey 1

56SW420LERO 20A 440V 4 pole switch - Resistant Orange 1

56PBS1LEGY Emergency stop push switch - Grey 1

56SW332LERO

56SSW15LEGY


IP66 ‑ industrial socket outletsn IEC 60529n BS 1363

Part number Description Qty56SO3166LEGY 16A 16h 220/250V 3 pin surface socket outlet - Grey 1

56SO3326LEGY 32A 6h 220/250V 3 pin surface socket outlet - Grey 1





IP66 ‑ plugsn IEC 60529n BS 1363n BS 546

Part number Description Qty56P310GY 10A 250V 3 pin straight plug - Grey 1

56P313GY 13A 250V 3 pin straight plug - Grey 1

56P313RO 13A 250V 3 pin straight plug - Resistant Orange 1

56P315GY 15A 250V 3 pin straight plug - Grey 1

56P313EO 13A 250V pin straight plug - Electric Orange 1

56PA332EO 32A 250V 3 round pin angled plug - Electric Orange 1

56SO3166LEGY

56P313GY

231


Moulded coversn IEC 60529n BS 5733

Part number Description Qty5632LEGY 1 gang lid for 2 x E-Series mechanisms - Grey 1

5632LERO 1 gang lid for 2 x E-Series mechanisms - Resistant Orange 1

56CB4GY 2 gang lid for 4 module device - Grey 1

56CB4NGY 2 gang lid with neon for 4 module device - Grey 1

56CB4NRO 2 gang lid with neon for 4 module device - Resistant Orange 1

56L1GY Blank lid for 1 gang enclosure - Grey 1

56L2GY Blank lid for 2 gang enclosure - Grey 1

Surface mounted enclosures

56E3GY

56E6GY

56E4VHGY

n BS EN 60947-3

Part number Description Dimensions Qty56E1GY Surface mount 1 module - Grey 101 x 101 x 63mm 1

56E1RO Surface mount 1 module - Resistant Orange 102 x 101 x 63mm 1

56ED2GY 2 gang deep - Grey 198 x 101 x 100mm 1

56E2GY 2 gang - Grey 198 x 101 x 63mm 1

56E2RO 2 gang - Resistant Orange 199 x 101 x 63mm 1





56E4VHGY 4 gang vertical - Grey 391 x 101 x 63mm 1






56ES1GY Surface mount 1 module shallow - Grey 101 x 101 x 38mm 1

56ES2RO Surface mount 2 module shallow - Resistant Orange

198 x 101 x 38mm 1

56ES2GY Surface mount 2 module shallow - Grey 101 x 101 x 38mm 1

232


Flush mounting surroundsPart number Description Qty56FA1GY 1 gang flush surround - Grey 1

56FA2GY 2 gang flush surround - Grey 1



Combination devices

56C313GY

n IEC 60529n BS 1363

Part number Description Qty56C313GY 13A 250V 3 pin combination surface switched socket outlet - Grey 1

56SO313GY 13A 250V 3 pin surface socket outlet - Grey 1

56SO332GY 32A 250V 3 pin surface socket outlet - Grey 1

Switched fused connection units with enclosure

56FCUGY

n IEC 60529

Part number Description Qty56FCUGY 15A 250V switched fused spur - Grey 1

Junction boxn IEC 60529n BS 5733

Part number Description Qty56JB1GY 1 gang junction box - Grey 1

56JB1GY

56FA1GY

233

Technicalinformation

234

Conventional electrical installation within a building is wired. Where wiring becomes too complicated or is simply impossible, radio is used.

Using radio systems makes sense especially when

n Customer requirements change and for example functions are to be upgraded.

n A house or flat is to be modernised.

n Flexibility of the installation site is required.

A huge number of functions of a conventional electrical installation can be performed with the CONNECT radio system:

n Switching lights on/off

n Dimming lights

n Blind control

n Timer

n Scenes

“Scenes” can also be programmed. Not only one function is carried out at the push of a button but several different ones (for example

switching on lights and simultaneously moving roller shutters). An additional advantage of the CONNECT radio system is that it is a bi-

directional radio network. That means that all devices can transmit and receive signals simultaneously. It is possible for signals to be routed or

for alternative radio transmission paths to be found (e.g. during temporary faults).

Other properties:

n Secure transmission using frequency range 868 MHz

n Clear addressing enables interference-free operation of multiple radio systems side by side

n Very flexible installation and configuration

n Implementation of groups, scene controlling options and central functions

n The extensive range of products covers areas of application such as:

- Lighting control

- Roller shutter control

- Time switching functions

- Staircase lighting function

- Scenes

n No cable required, due to the use of battery-powered transmitters

n Extension of existing installations

n Extremely flat battery-powered push-button, e.g. for attaching to glass

n Indoor transmission range: around 30 m (depending on installation site and building characteristics such as materials and wall thicknesses)

n Range in free field: approx. 100 m

Configuration

You have two configuration possibilities, depending on your requirements:

The EASY CONNECT method

For connecting max. five devices which are in the direct vicinity of each other (e.g. in one room). Configuration is carried out manually.

Using the CONNECT radio configuration tool

For systems between different rooms with up to 100 devices and extensive functions (scenes, central switching function, switch times,

individual key assignment). To do this you will need the CONNECT radio configuration tool which offers configuration, documentation and

diagnostic tools. Configuration is carried out using a PC.

System administrator

For both configuration methods, one device must always be included as a “system administrator”. Information is saved in the system

administrator, for instance routing tables, the functions of all integrated devices as well as a defined network ID and device IDs. A system

administrator must therefore be available when programming or carrying out changes.

The device allocated the system administration function must be in a fixed location which is easily accessible. We therefore recommend you

use a push-button (e.g. radio push-button 1-gang/2-gang) as a system administrator. You can see which devices may be used as system

administrators in the following tables.

In the following, the push-button which is to adopt the system administrator function is referred to as the “system administrator”.

The following symbols can be found in the following circuits and device tables:

Technical information

Connect

Functional principle

235


Connect

The device can assume the functions of the system administrator. We recommend

you use only fixed devices as system administrator (e.g. CONNECT radio

push-button, 1-gang).

The device has the routing function. It automatically relays signals and maintains

fault-free operation.

The device transmits signals.

The device receives signals and switches accordingly e.g. light or roller shutter.

The EASY CONNECT method is not available or only available with restrictions.

Z-Wave standardThe device is compatible with Z-wave products from other manu-

facturers.

EASY CONNECT

The EASY CONNECT configuration method is used when the radio network consists of maximum five devices, which are located in direct

reception range of each other (e.g. in a room).

Symbols

236


Connect

Requirements

n With new radio systems the push-button, on which a receiver is firstly programmed, manages the system administration. The system

administrator is installed last of all as you will need to be able to move it near the devices which are to be programmed.

n Install all devices, except for the system administrator, at their final installation locations and connect them.

Connect the loads to the receivers. Some receivers use the load to display confirmation of commands received during the learning process.

Teaching devices

Connections between devices are established by first teaching all receivers individually to the system administrator.

Subsequently, additional transmitters are taught to the system administrator. During this procedure the connections and functions of the

system administrator are copied to the transmitters. That means the transmitters carry out the same functions as the system administrator.

The teaching process

Only three steps are necessary to carry out teaching. Basic procedure:

1 Move the (prospective) system administrator into the vicinity of the device which is to be taught.

2 First of all press the key on the (prospective) system administrator three times within approximately 1.5 seconds.

- If a system administrator does not yet exist, the LED will start to flash for approximately 6 seconds and then will light up continuously for

approximately 30 seconds.

- If a system administrator exists already, the LED will immediately light up for 30 seconds.

You have time to teach a different device during the 30-second period when the LED lights up continuously.

3 First of all press the key/programming button/sensor surface on the device to the taught three times within approximately 1.5 seconds. This

is confirmed by the LED lighting up for approximately 1 second.

The system administrator and the device which was to be taught are now connected with each other. If you want to teach additional devices,

repeat the three steps.

Example: Installation of a two-way circuit with two receivers:

1 2

3x

3x1 2+

6 s 30 s

Step 1: Teach receiver 2 to the system administrator.

3+

1 2

3x

3x1 3

30 s

Step 2: Teach receiver 3 to the system administrator.

3x

4

3+

1 2

3x

1

4 30 s

Step 3: Teach transmitter 4 to the system administrator

1 12 2

33 44

1 12 2

33 44

Result: You have installed a two-way circuit with

two transmitters (push-buttons) and two loads.

Easy Connect

237


Connect

One‑way circuit

Two‑way circuit

Intermediate switch circuit

Roller shutter control

Two‑circuit switch and combinations

The CONNECT 1‑gang radio push‑button is always

assigned the function of the left key on the system

administrator.

Combinations that are not permitted

Easy Connect circuit diagrams

Changeover

relay receivers

Changeover

relay receivers

238


Connect

You select this configuration method when you want to set up a radio network between rooms with a wide range of functions (scenes, central

function, switching times, individual stored key functions to name but a few). The system is capable of managing up to 100 devices.

Requirements

n You need a laptop, the “CONNECT radio configuration tool” software and the “CONNECT radio USB data interface”.

n Ensure that receivers are distributed throughout the entire building. Receivers are able to route radio commands. If a radio transmission path

is temporarily disrupted, other receivers within range can route the radio commands. The more receivers in range of the transmitter and of

each other, the more reliable and stable operation will be.

n If a CONNECT radio system device has been previously programmed, it is recommended to reset to factory settings before trying to

integrate it into a new system.

Setting up a new CONNECT radio system

Basic procedure:

1 Install devices

2 Connect the configuration tool/program the system administrator

3 Register devices

4 Insert function channels in the “Building view”

5 Connect devices

6 Program devices

Installing devices

Install all the devices at their final installation locations and connect them. This is necessary as the devices recognize where other devices

capable of routing radio commands are located even when being registered.

Connect the loads to the receivers. Some receivers use the load in order to confirm commands received.

Connecting the configuration tool/programming the system administrator

The configuration tool must be connected to the network in order to register new devices or to change an existing radio network. The

connection is always made via the system administrator. Therefore you are prompted to actuate the system administrator or the prospective

system administrator (three times within approximately 1.5 seconds). The system administration is then transferred to the configuration

tool so that you may set up or change the system. As soon as the configuration tool is disconnected from the radio network, the system

administration is transferred back to the original system administrator.

Registering devices

Once the configuration tool is connected to the radio network, you must register the devices. Here the configuration tool reads out all of the

devices’ information in order to be able to integrate them into the radio network. Register all the receivers first and then all the transmitters

in a room. Only receivers are able to route radio commands. Information about which receivers are present is also stored in the transmitters.

The sequence in which devices are registered is therefore important. In order to register a device you must actuate it three times within 1.5

seconds. To confirm, the receivers briefly change their current switching status; on the transmitters, the LED in the push-button flashes. The

device to be registered must be located in the direct vicinity of the “CONNECT radio USB data interface” connected to the laptop.

Software configuration tool

239

Standard lamp

Inserting function channels in the “Building view”

A device has one or several function channels which are used to carry out functions. A 2 gang push-button, has

up to four channels, for instance:

Each of these channels can be allocated a function via a connection. The functions available

depend on the properties of the device. The individual function channels are shown in the building view as a

tree-structure according to their logical arrangement (place of actuation/operation). The logical arrangement is

usually the same as the installation location.

Connecting devices

If the devices have been registered and the function channels have been inserted in the building view, you have

to link the individual devices or their function channels. This is done graphically by simply dragging a line from

the transmitter to the receiver. The configuration tool automatically detects which functions are available for the

connected channels and sets a logical function for this connection. Example: If you connect a push-button to

a dimmable plug adapter, the dimmer function will then automatically be set. The channels are pre-set for each

device but can be changed.

Programming devices

In the final step, the information must be supplied to the individual devices. This is done by programming the

individual devices. The laptop must be connected to the radio system and be in direct reception range of the

device which is to be programmed.

Note: You always find the latest updates in the download section of www.schneider‑electric.com/uk


Connect

1 2

34

Selected: Living room Transmitter

Receiver

Dimming

Lamp in hallway

Living room lampLiving room/hall light

Living room/hall light

CONNECT radio push-button,

2-gang,

(left rocker 1/6)

CONNECT radio push-button, 2-gang, Merten

(right rocker 2/6)

CONNECT radio sensor surface, switch,

CONNECT radio sensor surface, dimmer,

CONNECT radio plug adapter, switch

Switching

Software configuration tool

240


Sphere

General informationVoltage 220 – 240V 50Hz

Operating frequency 433MHz

Number of channels 5 or 8

Number of unique house codes 256

Operating distance 30 meters

Operating temperature 0oC to + 40oC

Operating humidity 0% to 95%

Receiver terminationProduct Part number Termination

Ceiling dimmable receiver GSWCDR35 L & N*

Ceiling relay receiver GSWCRR5A L & N*

Floor dimmable receiver GSWFDR35 L, N, & E

Fluorescent dimmable receiver GSW10VFLDR L, N, & E

Technical informationLamp / Load type Sphere component

Dimming SwitchingCeiling/Floor

dimmable receiverGSWCDR35GSWFDR35

Wall dimmable receiver

GSWWDR30

Fluorescent dimmable receiver

GSW10VFLDR

Ceiling relay receiverGSWCRR5A

Min/Max loads Min 20W/VAMax 350W/VA

Min 50VA/60WMax 300W/VA

Max 800W / 4 ballasts Max 5A (2A motor load) (1)

Low Voltage (12V) halogen lamps

Dimming electronic or magnetic transformer (4)

Y Y – (trailing edge electronic

transformers only)

N Y – on/off only

Mains GLS / reflector etc, mains (230/240V) halogen lamps (3)

Y Y N Y – on/off only

Linear fluorescent lamps

T8 and high output T5 lamps

N N Y (only with 1-10V control

electronic ballast)

Y – on/off only

Linear fluorescent lamps

T4 lamps and T5 4-13W lamps

N N N Y – on/off only

Compact fluorescent lamps with separate ballast

4 pin lamps N N Y (only with 1-10V control

electronic ballast)

Y – on/off only

CFLi lamps (including those marked ‘dimmable’)

‘Plug-in’ Compact fluorescent lamps


Light-emitting diode (LED) (Solid state lighting)

Mains voltage lamps N (2) N (2) N Y – on/off only

Light-emitting diode (LED) (Solid state lighting)

When used withseparate driver

N N Y (with 1-10V control driver)

Y – on/off only

High intensity discharge lamps

N N N Y – on/off only Max 400W (1)

Other loads: relay, contactor, ceiling fan, wall fan, extractor fan etc.

Motor load N N N Y – on/off only

Luminaires that already incorporate a dimmer

Father / child up lighter etc


1. For higher loads use a suitable contactor.2. Dimmable LED lamps may be suitable for use with Ceiling / Floor Dimmer Receivers, if designed for use with triac (leading edge) type dimmers. Dimmable LED

lamps may be compatible with the Wall Dimmer Receiver if designed for use with trailing edge type dimmers.3. Avoid using inferior economy or unbranded mains voltage incandescent or halogen lamps.4. Using dimming electronic transformers and low voltage halogen lamps eliminates potential end of life issues with mains halogen and incandescent lamps. When

dimming with electronic transformers check minimum loading with manufacturer. Do not use torodial (round shape) magnetic transformers unless specifically stated by the manufacturer to be dimmable. Do not mix electronic and magnetic transformers on the same Receiver.

241


Sphere

Frequently asked questionsCan I have more than one Controller in a room?

Multiple Controllers can be used to control the same lights in a room (e.g. 1 Wall Controller and 1 Handheld Controller). Controllers are added by simply duplicating the Haze, Room and Mode switch settings on each of the additonal Controllers. Note if a Controller sends the same command as the previous command sent from another Controller, there will be no response. A second button push will be required. (This is a result of the last Controller command information being held only in the Receivers). One Controller can dim the channels and an alternate Controller can operate scenes. To do this set the dimming/scene switch to ‘D’ or ‘SC’ as required.

How do I replace a lost or damaged Controller?

If a Controller is damaged or lost, obtain a replacement and find the record made of the switch settings on the old Controller then duplicate these exactly on the new Controller. Since all the channel and scene settings are stored in the Receivers, no reprogramming is necessary.

Where should I install the Controllers?

Once programming the Receivers has finished, position the Controller(s). As the system is wireless these can be positioned anywhere in the home, taking into account range limitations. A fixed Controller by the door of every room equipped with Sphere will be easy to find when entering or exiting.

What is happening if the lighting seems to change by itself?

Sphere control commands are heavily encrypted. As such unexpected changes to the lighting in one or more rooms can only be caused by Sphere Controllers that have the same switch settings being operated nearby, for instance in adjacent rooms or neighbouring apartments that have the Sphere system. The best way to avoid conflicting operation is to plan the switch settings in advance for all adjacent and nearby systems. However it is still possible that interference could occur if a new Sphere system is installed locally. In this case, the House switch settings on the Controller of the affected room(s) will need altering as follows. (Note that access to the Receivers will be required to press the Receiver buttons during this process).

1. Change the coding of the House switches on the Controller of an affected room by moving one (or more) switch to its alternate position. The associated Receivers will no longer respond. Note that at least one switch needs to be in the up position.

2. Check that the new switch setting does not interfere with other rooms or neighbouring systems.

3. Once a House switch setting has been found that does not interfere with other Sphere systems the channels of the associated Receivers will need to be reassigned as described in the ‘System set up’ section, page 20, in effect starting a new installation. As long as the Receivers are assigned to the same channels as before, stored scenes will be not be affected.

4. If there are more Controllers for the same room, their switch settings should also be updated. Ensure a note is made of the new switch settings.

Following a period of successful installation and use:

1. If there is no response to Controller commands.

a) Check that the mains supply to the installation is still in place, i.e. no MCB’s have tripped.

b) Check that the controller LED’s light when a button is pushed and that the batteries are OK as described on page 36.

c) Ensure no room or house switch has been changed inadvertently.

d) Ensure there are working lamps running from affected Receivers / in affected channel(s).

e) Check the points above, and then gain access to and observe at least one of the Receivers (if installed a Floor Receiver is most convenient) to see if the Receiver LED flashes when the centre button of a Controller is pushed.

f) If all checks are OK and the fault still occurs, contact the Helpline, page 43.

2. If any of the lighting loads develop unusual behaviour e.g. flicker or cannot be turned off.

a) Check that the relevant connected load is the correct type (pages 34–35).

b) Disconnect the supply to the system by tripping the appropriate circuit breaker / removing the circuit fuse, then reconnect the supply by resetting the circuit breaker / replacing the fuse (if in doubt contact a qualified electrician) then operate the system.

c) If after carrying out the above the behaviour continues to occur, contact the Helpline, page 41.

If there are any more questions about the Sphere system or how to use it and to find out about updates and more FAQ’s, please visit the website www.schneider-electric.com/uk/sphere

242


ULTI

SpecificationSwitches Dimmer

Description 1-Gang 2-Gang 1-Gang 2-Gang

Safety Compliance IEC60669-2-1

Operation Toggle on/off Toggle On/ Off/ Adjust lighting intensity

Memory Up to 8 Remote Control Units 8 Remote Control Units

LED Backlight Changeable Amber / Blue colour Changeable Amber / Blue colour

Load Type Please Refer to Load Table

1. Incandescent2. Low Volt. Halogen with magnetic transformer

Electronic Dimmable3. Low Volt. Halogen with Ballast dimmable electronic

transformer

Minimum Load 25W 40W per channel

Maximum Load Please Refer to Load Table 600W 400w per gang, total

600W for both gangs combined

Operating Temperature 0ºC to + 40ºC

Operating Humidity 0% to 95%

Operating Voltage & Frequesncy 220-240V AC, 50/60Hz

Radio Frequency 434MHz

Mounting Centres 60.3mm 60.3mm

Dimensions 87mm x 87mm x 39mm

Load type tableThe table below shows the maximum rating for 1‑gang and 2‑gang switch operating at 220‑240V ACSwitch

Lamp type1‑gang total switch load

2‑gang total switch load

Incadescent lamp 2000W Max power for one gang 2000WMax total power for both gangs added 2000W

Low voltage halogen (12V) with magnetic transformer

1900WMax power for one gang 1900W Max total power for both gangs added 1900W

Low voltage halogen (12V) with electronic transformer 1900W Max power for one gang 1900WMax total power for both gangs added 1900W

Fluorescent lamp with electronic ballast* 1800W Max power for one gang 1800WMax total power for both gangs added 1800W

Fluorescent lamp with magnetic ballast power factor correction capacitor*

1800WMax power for one gang 1800WMax total power for both gangs added 1800W

Fluorescent lamp with magnetic ballast but without power factor correction capacitor*

1000WMax power for one gang 1000WMax total power for both gangs added 1000W

Energy saving lamp* 1400W Max power for one gang 1400WMax total power for both gangs added 1400W

Dimmer

Lamp type1‑gang total switch load

2‑gang total switch load

Incadescent lamp 600WMax power for one gang 400W

Max total power for both gangs added 600W

Low voltage halogen (12V) with magnetic transformer 600VAMax power for one gang 400VA

Max total power for both gangs added 600VA

Low voltage halogen (12V) with electronic transformer 600VAMax power for one gang 400VA

Max total power for both gangs added 600VA* Each 0.47uF/275VAC, “X2” bypass capacitor is required to connect parallel to the load in the gang(s) with energy saving lamp or compact fluorescent lamp.

243


ULTI

FreelocateProduct FreeLocate FreeLocate

2‑Setting Switch 6‑Setting Switch

Memory 2 scenes/2 devicessettings

5 scenes/5 devices

settings, All Off.

Battery Type CR2032 button cell battery

Operating Temperature 0 °C to 40 °C



Operating Range 100m (Open environment)*

Dimensions (H) x (W) x (D) 85mm x 85mm x 13mm

* The performance of the operating range is subject to the actual conditions of the environment, such as weather and installation conditions. Under normal circumstances a longer range can be achieved outdoors, since indoors obstacles like concrete walls and metal shelves may shorten the operating range.

Hand held remote Spec/product Remote controller

Memory 5 scenes/5 devices settings, Master Dim Up/Down and All-Off

Battery Type 2 x AAA batteries

Operating Temperature 0 °C to + 40 °C



Operating Range 100m (Open environment)*

Dimensions (H) x (W) x (D) 125mm x 51mm x 25mm

* The performance of the operating range is subject to the actual conditions of the environment, such as weather and installation conditions. Under normal circumstances a longer range can be achieved outdoors, since indoors obstacles like concrete walls and metal shelves may shorten the operating range.

Function comparison tableFreeLocate 2‑ FreeLocate 6‑ Remote control

Scene Programming • • •Device Programming • • •Disabling Programmed Scene Setting* • • -Enabling Programmed Scene/Device* • • -Disabling All-Off Command - • •Enabling All-Off Command* • • •Scene/Device Mode Selection (Single Function) • • •Scene/Device Mode Selection (Multiple Function)* • • •Changing All-Off Function to Scene Function* - • -Resume All-Off Function* - • -Switch/Dimmer Partial Memory Clear • • •* Only applicable to the Switches and Dimmers of Product No. Starting with U20.

Environment and installation considerationsAs the system uses radio frequencies, performance is dependant on the installation. Reliable operation in the following environments can be achieved although the effective range will be reduced by:n Installation in metal frame buildings or extensionsn Operation through solid or cavity stone, brick or block walls n Operation through more than one floor, ceiling or partition walln Locations near radio or television transmittersn Damp atmospheres e.g. swimming pools or saunasIf erratic operation is experienced moving closer to the receivers can usually be expected to restore correct operation.

244


ULTI

Frequently asked questionsQuestions Answers

1. Is two way / intermediate control acheivable using ULTI? Yes. By using a FreeLocate switch

2. What is the purpose of 047uF load capacitor UAX004? This capacitor should be used for specific lamp types where minimum load requirements are not met

3. What size of mounting box should be used with ULTI switches and dimmers?

A 35mm or deeper back box should be used.

Trouble shooting guideSymptom Possible cause Solution

Switch / Dimmer is not responding to the Remote Control Unit

1. Not previously programmed or improper programming.

Repeat the Programming Procedures explained programming. in the Manual.

2. Switch/Dimmer is set to Programme mode.The LED indicator is turned on red now, indicating the unit is in Programming mode. Programme button to exit Programming mode.

3. Voltage is too low.Make sure the operating voltage range is within the requirement.

4. Power rating is too lowReplace a load that meets the minimum loading requirement.

5. RF wireless control is disabled. (Programme flashes continuously in the pattern of 2)

Press the Programme Button of the LED Switch/Dimmer 6 times within 1 minute. Programme LED should stop flashing.

Unable to programme.

1. Red Programme LED flashes after the Programme Button is pressed.

This indicates the memory is full. Perform Programme Button is pressed. Memory Clearing Procedures to release space.

2. The Switch does not receive programming commands.

Check the position of the function selector at the commands. back of the FreeLocate Switch. Make sure it is in the Programme position.

3. RF wireless control is disabled. (Programme flashes continuously in the pattern of 2)

Press the Programme Button of Switch 6 times within 1 minute. Programme LED should stop flashing.

Main light or LED backlight does not turn on.

1. Wires are not properly secured or connected in the terminals.

Make sure the wires are secured, screws are in the terminals. fastened and the Live or Load wires have been connected to the correct terminals.

2. MCB is OFF or has been tripped.Switch on the MCB. If a breaker continually trips, contact a registered electrician to find out the cause of the problem

3. Temporary disorder. Switch off the MCB and then on again to reset the switch.

Main load is turned off automatically.

1. Power rating is too low. Replace the load that meets the minimum loading requirement.

2. Wires are not properly secured in the terminals.

Make sure the wires are secured and screws are terminals. Fastened properly.

3. Controlled by other remote control unit within the area.

Determine which remote control unit(s) is (are) the area. controlling the particular main light. (Refer to Memory Clearing Procedures).

Programme LED flashes continuously in a pattern of 2 for 1 minute then stops.Pattern continues when Control Button is pressed again.

1. Low Volt Halogen (12V) is blownReplace the lamp load if it is blown, then perform a unit reset.

2. Magnetic transformer is faulty. Check the status of magnetic transformer.

245


LexCom Performance

Ease of installationn Insulation displacement contacts (IDCs) with easy, fast connection using the universal connector tooln The system is easy to adjust with the test kit; simply check the amplification level and the overall signal level

ScalabilityThe LexCom Performance VDI system has open interfaces to existing and future applications (wireless, voice over IP, digital video, etc.), thus giving the user complete freedom of choice (some restrictions may apply).The standard LexCom Perfromance solution offers one unit for 8 telecommunication outlets. When greater resources or distribution capacity are needed, simply add a second unit daisy-chained to the first.

Aesthetic and functional integrationThe LexCom Performance core unit, attractive and discreet, can be easily integrated into the house, due to:n Limited space requirementsn Installation on DIN rail very appropriate for modular enclosuresn Attachment to 10˝ mounting for incorporation in 10˝ VDI cabinet (supplied by others)n Side clips for wall mounting or any other horizontal mounting method

Ease of usen No cross-connection required: once the core unit has been connected to the phone cable end, the TV cable or aerial and the data selector

switch, the user can access all supported services from the telecommunication outletsn Simply connect radios, TV sets, telephones and data applications with the correct cord to one of the 8 predefined links to obtain the

desired applicationn One of the two phone lines can be selected on each of the links at any time

Satellite TVLexCom Performance will not transmit feeds from the LNB of a satellite receiver. To achieve the same satellite channel in multiple rooms you must use the RF output on the receiver and connect to RF in on the LexCom Perfromance unit.

Cable TVThe LexCom Performance system will allow the use of multiple cable receivers within the home. Restrictions to interactive services will apply as the LexCom Perfromance does not accommodate for return path.

BroadbandWith the LexCom Performance system you can have access to a high speed broadband networks that can provide you video, entertainment, online gaming, plus the ability to download music and video. Other opportunities include VoIP (Voice over IP), SOHO (small office, home office), home schooling, and many more.

Aerial/CATV input

Cabled TV broadband output

LexCom Performance cable to outlet plate

Data input ports

Power indicator

Telephone1 input

Telephone2 input

LexCom Performance external view

1 2 3 4 5 6 7 8

Gain

(1)

Tilt(2)

Power input

Overall RF Gain control

RF Tilt control

Multi LexCom Performance connection point *Do not use unless connecting to multiple units*

Cable & earth clamp

Earth point

Local RF Gain control

IDC connections

Phone line selection

LexCom Performance internal view

LexCom Performance core unit

Telephone indicator

246


LexCom PerformanceSet up and configuration

Cable TV and broadband internet configurationOutput will provide:n A connection to the cable TVn The choice between the two phone linesn Access to internet

Consists of :n 1 CATV connectionn 1 or 2 phone linesn 1 CATV modemn Data switch

1 2 3 4 5 6 7 8CATV

Modem

CATV

Tel. 1

Tel.2

1 2 3 4 5 6 7 8

ADSLFilter

ADSLModem Ethernet

Aerial

Tel.

Tel.2

TV/RF input ADSL broadband plus Output will provide:n A connection to the TV aerial and other RF signalsn Choice between the two phone linesn Access to internet

Consists of :n 1 TV aerial connectionn 2 phone linesn 1 ADSL filtern 1 ADSL router/modemn Data switch if insufficient output ports on router

TV/RF input & dataOutput will provide:n A connection to the TV aerial and other RF signalsn Choice between the two phone linesn Access to the local computer network

Consists of:n 1 TV aerial connectionn 2 phone linesn Data switch

Aerial

Tel.1

Tel.2

247


LexCom Performance

The active all-in-one module provides the interface for the LexCom Performance system. The incoming services are distributed into the cable links on individual pairs by the dedicated features of the core unit, such as;

n Broadband amplifier for TV/Radio with separate output stages

n Data panel with true cat.6 link performance n Telephone line splitter with support of 2 different

lines (maximum of 4 ren per line)

The system requires LexCom Performance cable in its use to accommodate a link length from 2 to 50 metres.

Below the cover, the links are terminated to the unit, and turning-adjustment of each output stage is done per link to adapt for the lengths. Also global adjustments for Gain and Tilt of the incoming CATV line is possible.

If more than 8 outlets are needed in an installation, 2 or more core units can be daisy chained to achieve 16, 24,..outlets capacity.

The core unit includes power supply and connection cords for the telephone line inputs.

Core unit electrical and technical dataPower consumption 14W maxBandwidth 47-862 MHz (CATV on all links)Grain forward Global = -5 / +15 dBTilt (equalizer) Global = + / - 6 dBInput level 60-77 dBµV (CATV RF input)Return loss -10 dB min. (CATV RF input)

Insertion lossRF input to DATA = 4 dBRF input to TEST = 10 dBDATA to RF input = 4 dB

Screening attenuation > 90 dB (class A)Impedance input 75 Ohm (CATV RF input)Input voltage 12 VdcConstruction and material data

Input interface

Tele lines: 2 x RJ11Data ports: 8 x RJ45 STPCATV RF: F-conn. (fe-male)Security line: RJ3 1XPower supply: 5.5mm jack (+ on centre)

Output interfaceCable links: LSA punch down (TIA568B)CATV test: F-conn. (fe-male)CATV data: F-conn. (fe-male)

Standards and approvalsApplication standard EN50083-2: emission and immunityCabling standards EN50173:2002 Cat.6 PL

A 4-pair high bandwidth and double shielded installation cable for LexCom Performance applications. It offers Superior shielding with each pair individually shielded in metal foil and the overall tinned copper wire braid (S/STP).

The cable is specifically matching the applications in the LexCom Performance system, using the well known colour coding from LAN installations.

The LexCom Performance installation cable can be used in both surface and flush mounted installations and shows excellent resistance to damage and reduction of performance due to stress from the installation work.

The cable is offered in both 120 m box and 300 m drums, where the box is matching the average cable need for an apartment installation.

Installation cable electrical and technical dataAttenuation 47 dB @ 600 MHz / 100 meter Bandwidth 0 - 900 MHzImpedance 100 Ohm nom.

NEXT93 dB @ 100MHz80 dB @ 300 MHz75 dB @ 600 MHz

Signal Velocity 0.8 cBending radius under installation

Min. 65 mm.

Bending radius Installed Min. 30 mm.Temperature, Installation 0 °C to +50 °CTemperature, Operation -20 °C to +60 °CConstruction and material dataMaterial LSFROHWeight 55 kg/kmPrinting Home installation cable 2x4xAWG23 SSTPCaloriefic Value 0.55 MJ/mCable Ø 7.1 mmColour: conductor White/Blue, white/orange, white/green, white/brownColour: sheath White RAL 9010Standards and approvalsAbsence of halogens ISO 60754-2Flame Retardance ISO 60332-1 / -3Application standard EN 50173-1Cable standards EN 50288-5-1Application standard ISO 11801

248


LexCom Performance

Trouble shooting Recommendations and installation

Telephone Connections For all telephone connections, you have to use a two wire line adaptor in order to avoid any short circuit or non-functioning of other services (TV & data).

Security Input Do not use the Security Input unless used with the stacking cord. Failure to do so will cause permanent damage of line one.

Non-functioning telephone If the telephone line 1 does not work, but that the telephone line 2 still works, the line 1 could have been damaged by the RJ11 plug connected in the security socket. If it is the case, please contact Schneider Electric Ltd.

PABX

Where a PABX is in use, you must use 1Pair telephone cord between the PABX and line 1 or line 2. If the PABX requires more than 1Pair, it will not be compliant with the LexCom Performance system with the potential risk of damaging the PABX.

Noise on the telephone line 1 or line 2

If noise on the telephone line 1 or 2, check the system :* without the ADSL filter, * by plugging directly the telephone on the telephone line from the operator (disconnection of the LexCom Performance). If no noise occurs when doing these operations separately, the problem should come from the mismatch impedance between the used telephone and the LexCom Performance.

Poor TV picture Adjust Gain and Tilt to improve signalPoor/No TV signal using triple play Ensure the correct input cable is used from wall outlet plate to triple play

Data/broadband cableThe dedicated LexCom Performance cables must be used for all data and broadband services

Data input to LexCom PerformanceCat 5, Cat 5E, Cat 6 or dedicated LexCom Performance cables can be used as inputs

Frequently asked questions Answers

Can I distribute HDMI over LexCom Performance? LexCom Performance will distribute RF television, data and telephone

What is the minimum and maximum single length I can run LexCom Performance cable?

min. 2m, max. 50m

Can I use Cat. 5 or Cat. 6 cable? No, bandwidth is insufficient on Cat. 5 and Cat. 6 cable

Is it possible to receive more than one signal from one outlet?

Yes. Incorporating a Tripleplay splitter enables you to connect to TV, Data and telephone at one LexCom Performance outlet.

Do I need to run 3 cables to each wall outlet? One of the many advantages of LexCom Performance is that you only need to run one cable to each LexCom Performance outlet

Can I have infra-red control over my equipment? Yes, by using a seperate RF to IR Convertor (available seperately from retail outlets)

Can I distribute cable or satellite broadcast? LexCom Performance will not transmit feeds from the LNB of a satellite receiver. To achieve the same satellite channel in multiple rooms you must use the RF output on the receiver and connect to RF in on the LexCom Performance unit.

The LexCom Performance system will allow the use of multiple cable receivers within the home. Restrictions to interactive services will apply as the LexCom Performance does not accommodate for return path.

With the LexCom Performance system you can have access to a high speed broadband networks that can provide you video, entertainment, online gaming, plus the ability to download music and video. Other opportunities include VoIP (Voice over IP), SOHO (small office, home office), home schooling, and many more.

249


Wiring accessories

Recommended quantity of socket outlets for domestic installation Inadequate installations can occur when not enough socket outlets have been installed or where the existing sockets are located in the wrong areas. This could lead to potentially dangerous improvisations.The table below summarises the recommendations of the Electrical Installation Industry Liaison Committee (EIILC) regarding the minimum number of twin switched socket outlets per room, suitable for domestic installations. This takes into account likely uses and likely trends.

Room Number of sockets Room Number of socketsKitchen 4 Landing/stairs 1Lounge 6 Hall 1Dining room 3 Garage 2Double bedroom 3 Store/workroom 1Single bed-sitting room 3 Central heating boiler point 1

Wiring circuits for 6AX and 10AX switches

Diagram A – One way circuits

Diagram C – Intermediate circuits

Diagram B – Two way circuits

Note: 1 way or 2 way switches can be replaced by dimmer switches. Rotary dimmers are 1 way only whilst Push dimmers are 2 way. LV dimmers are suitable for use on the LV input side only.

L1 L2

LN

LN

N2 L2

L1N1COMCOM

COM COM

L1 L1

L2 L2

L1 L1

L2 L2

LN

LN

COM COM

COM COM

L1 L1 L2 L1

L2 L3 L4 L2

L1 L1

L2 L2

L1 L2

L3 L4

LN

LN

Note: Metal clad accessories are supplied complete with a 42mm surface mounted box in the same matching finish. Metal plate accessories are not suitable for mounting on surface moulded pattresses.*Dependent upon wiring configuration **For 16mm flush fitted steel boxes use adaptor plate supplied when mounting 2 Way Ultimate slim line moulded dimmer switches

Accessories mounting boxProduct Description Ultimate

white mouldedExclusivewhite moulded

Ultimateflat plate

Roccadecorative

Exclusive brassand metal plate

6AX/10AX plate switches

1-2 gang 16mm 16mm 16mm 25mm 25mm3 gang 25mm 25mm 25mm 25mm 25mm4-6 gang 25mm 25mm 25mm 25mmTP isolator 25mm 25mm 25mm 25mm

Dimmer switches1 & 2 gang **16mm/25mm **16mm/25mm 25mm 35mm 25mm3 & 4 gang 25mm 25mm 25mm 25mm

Socket outlets1 gang 25mm*/35mm 25mm 25mm*/35mm 25mm 25mm2 gang 25mm*/35mm 25mm 25mm*/35mm 25mm 25mm3 gang 25mm

Round pin sockets 25mm 25mm 25mm 25mmRCD socket outlets 1 & 2 gang 25mm 25mmFused connection units 25mm 25mm 35mm 35mm 25mmFlex outlet plates 25mm 25mm20AX key switches 25mm 25mm 25mm 35mm 25mm20AX DP switches 25mm 25mm 25mm 35mm 25mm

32A DP plate switches1 gang 47mm 47mm 47mm2 gang 47mm 47mm 47mm 47mm

45A DP switches1 gang 47mm 47mm 47mm2 gang 47mm 47mm 47mm 47mm

45A DP ceiling switch 47mmCooker connection units 47mm 47mm 47mm 47mmCooker terminal box 47mm 47mmShaver sockets 47mm 47mm 47mmTelephone socket outlets Master & secondary 25mm 25mm 25mm 25mm 25mmCo-axial socket outlets Single & twin 25mm 25mm 25mm 25mm 25mmDiplex and triplex 25mm 25mm 35mm 25mm 25mmSatellite socket 25mm 25mm 25mm 25mmRJ45 & RJ11 35mm 35mm 35mm 35mm 35mm

250


Wiring accessories

Dimmer switchesGeneral Information:When specifying dimmers it is advisable to obtain as much information as possible to ensure suitability and compatibility of products. Consider the following:n Type of lamps/lightingn Type of control gear used in the light fittings, (if applicable) e.g. type. make and model number of transformer or ballast, etcn Number of light fittings/load of each dimmern Number of circuits/dimmersn Number of dimmers on each platen Number of switching positions for each circuitn Any requirement for dimming lights from more than one position

1 gang plate size Dimmer modules

Max.each dimmer

Min.each dimmer

Total per plate

1 250W 60W 250W1 400W 60W 400W1 (Electronic) 300VA 60VA 350VA2 250W 60W 500W2 (Electronic) 200VA 60VA 400VAMaximum load of 400W for the plate should not be exceeded.

Dimmer modules

Max.each dimmer

Min.each dimmer

Total per plate

1 1000W 100W 1000W

3 250W 60W 750W

4 250W 60W 1000W

Maximum load of 1000W for the plate should not be exceeded.GET mains dimmers are NOT designed for dimming with any form of Low Voltage transformer. For this application a suitably rated Low Voltage Dimmer Switch should be used.

Dimmer guidelinesMoulded plate mounted dimmers can generally be used with the supplied pattress to replace standard wall switches (where a 16mm box depth is typically used). For flat plate mounted dimmers, 25mm boxes are required, except for the 1000W Electronic dimmer that requires a 47mm box. All rotary dimmer terminations and wiring are the same as for standard switches, i.e. COM, L2 (and also L1 for two-way dimmers). Rotary one-way dimmers can only be used for switching and dimming from one position. Rotary two-way (push) dimmers can be used to replace any one, (but not both), of the two-way switch circuit, (note that only one dimmer can be used per switch circuit or lamp(s); thus the lights can be switched from more than one position but can only be dimmed from one. With any rotary dimmer, if replacing an existing switch or dimmer, make a careful note of which wires are installed in which terminals on the old unit, and then connect them into the terminals with corresponding markings on the new dimmer. To ensure that plate temperatures are within maximum limits, maximum total connected load for a single size plate is 630W, and for a double size plate is 1000W. For Low Voltage lighting, remember to allow for transformer losses when calculating the total circuit load, typically 15% - 20%.

To use electronic dimmers in 1, 2 or more way circuits the circuit diagrams below and the Important Notes MUST be followed exactly.

Simulated ‘Off ‑ Click’Recent developments within the industry have resulted in rotary dimmer modules not having the positive ‘Off Click’ as the dimmer is switched off. This has led to consumers returning product identifying they are not functioning. To counter this GET have introduced a ‘simulated Off’. The range has been designed to withstand a higher inrush current than others in the market. This inrush is typical when lamps turn on for the lamps ‘blow’. Typically this inrush or energy surge can be up to 100 times the normal current being supplied to a lamp. For example the inrush for a 150W lamp could be up to 40NS over 10 milliseconds. A number of dimmer products in the market when tested have a maximum capacity of approximately 20NS. The new GET product has an equivalent capacity of SONS. This, therefore means that the GET product will last longer within installations, depending on the switching duty. A thermal fuse protects the GET module. This will not protect the unit against an inrush but against overloads and short-circuits etc. This fuse is not self restoring or replaceable. It’s function is to protect against electrical and fire damage. This requirement was not mandatory in the previous standard and therefore some modules in circulation potentially do not have the safety feature, unlike ours.

Tungsten/Mains Voltage Tungsten Halogen LightingMost Tungsten lamps can be dimmed; these include standard GLS lamps, candle lamps, reflector and mains voltage Tungsten Halogenlamps etc. Tungsten lamps of mains voltage halogen type (GZ10, GU10 or G9) can be dimmed using standard Tungsten dimmers. However, to protect the dimmer, it is important to de-rate the dimmers maximum rating by 50%, (e.g. for dimmer rated as SOW- 400W, it’s Tungsten Halogen lamp rating becomes SOW- 200W). This de-rating requirement only applies to Plate and Grid dimmers rated up to 1500W, for other dimmers, observe individual product guidelines. While observing maximum dimmer ratings, also ensure that the connected load is not less than the minimum rating of each dimmer, otherwise the lamps may flicker and the dimmer may fail.

Maximum permitted loads in Watts for multiple dimmers in a single enclosure

Front plate gang size 2 3 4 6 8 9 12 18 24

Per row (max rating W) 400 480 480 480 480 480 480 480 480

Total plate (max rating W)

400 480 480 740 740 940 940 1440 1800

251


Wiring accessories

IMPORTANT NOTES - for 1 Way Installation

1. Read General Installation Safety Instructions before starting work

2. Do not connect any conductor to dimmer terminal marked RS. This is for use with 2 way switching

1 way installation wiring diagram

2 way and multi‑way installation wiring diagram

Important notes - for two way and multi - way installation1. Read General Installation Safety Instructions before starting work.2. Any existing 2 Way or Intermediate switches MUST be replaced with Retractive Press Switches.3. Any number of Retractive Press Switches may be installed provided total cable length does not exceed 50m.4. Either 1 Way normally open or 2 Way Retractive Push Switches may be used.5. If 2 Way retractive switches are used, connect to Common (COM) and normally open L1 (1 WAY) terminals as shown. Do NOT use the L2

(2 WAY) terminal.6. If replacing an existing 2 Way switch,cut back and insulate the unused 2 way wire previously connected to the L2 (2 way) terminal.7. All Metal Wall Boxes and Metal Plate Switches must be earthed.8. Do NOT connect more than 1 Dimmer in the same circuit,9. Remove label covering centre terminal on rear of dimmer. This terminal is to be connected to Retractive Switch as shown in wiring

diagram. Do NOT connect any other conductor to this terminal.

Circuit, lamp and other equipment compatibilityTo ensure optimum performance and reliability is obtained from dimmer switches the following recommendations and precautions should be followed as appropriate to the type of dimmer:

General recommendationsCircuitsIt is recommended that all lighting circuits incorporating dimmers be protected by a 6A or up to a 10A maximum Type B miniature circuit breaker.

Tungsten halogen lampsWhen using mains voltage Tungsten Halogen lamps, it is essential that these types of lamp incorporate internal fuses or are constructed such that arcing at the end of life cannot occur and are from quality lamp manufacturers. The use of inferior low quality lamps is not recommended and will invalidate any guarantee or warranty supplied with the dimmer switch.

Dimmable low voltage transformersn Always check transformer compatibility BEFORE installation and if in doubt always check with the dimmer Helpline or the transformer

manufacturer. It is recommended that electronic dimmable transformers be loaded to at least 70% of their rated maximum wattage.n When running multiple lamps on dimmable electronic transformers ensure that all lamps are working correctly. Replace failed lamps as

soon as possible as a single failed lamp may cause flickering of all other lamps connected to the same dimmer.n Do NOT mix electronic and magnetic transformers on the same dimmer switch.n It is recommended that a maximum number of 5 Low Voltage transformers only should be connected to an individual dimmer switch.

Electronic dimmersCircuitsn For two-way or more switching ONLY use retractive switches. Do NOT use two-way switches.

252


Wiring accessories

n The live supply for retractive switches must come from the live (L) connection of the dimmer.

Lampsn Do NOT use with Compact Fluorescent Lamps (CFL) even if marked “dimmable”, Fluorescent lamps and Light Emitting Diode (LED) lamps

of any description or motor loads.

Dimmable low voltage transformersn These Electronic dimmer switches, except the 1kW, use leading edge (phase delay) dimming technology and must therefore be used with

compatible good quality dimmable electronic or wire-wound (magnetic) transformers. Trailing edge (phase cut) dimmable transformers must not be used.

n The 1kW dimmer switch uses trailing edge (phase cut) dimming technology and must therefore be used with compatible good quality dimmable electronic transformers. Do not use the 1kW dimmer with magnetic transformers.

Rotary and 2 way (push) dimmersCircuitsn Only use two-way (push) dimmers in two-way switching circuits. Only use one two-way dimmer in a two-way switching circuit.

Lampsn These dimmer switches are suitable for dimming incandescent lamps and dimmable CFL lamps only and are NOT to be used with

Fluorescent lamps, Light Emitting Diode (LED) lamps of any description or motor loads. Use of non-dimmable CFL lamps may permanently damage the dimmer or the lamp and will invalidate any guarantee or warranty supplied with the dimmer switch.

n It is recommended that a maximum number of 5 dimming CFL lamps only should be connected to an individual dimmer switch.

Dimmable low voltage transformersn Only use Low Voltage dimmers with transformers. Do not use mains voltage dimmers.n The Low Voltage dimmer switches use leading edge (phase delay) dimming technology and must therefore be used with compatible good

quality dimmable electronic or wire-wound transformers. Trailing edge (phase cut) dimmable transformers must not be used.

Co‑Axial and Satellite socketsNon isolated Non-isolated products are intended for direct connection to a single or two separate TV/FM aerial downleads. These units are not designed for use in multi outlet systems.Single TV/FM outlet for connection to a single TV or FM coaxial aerial lead.Twin outlet for connection to each of two separate TV/FM, coaxial aerial leads.

Diplex and TriplexPerformanceDiplex TV/FM diplex units for connection to a single coaxial aerial lead with combined TV and FM signals.The connector standard IEC 169-2 plug for TV and IEC 169-2 socket for Radio.

Triplex TV/FM/SAT triplex unit for connection to a single coaxial aerial lead with combined TV, FM and satellite signals.TV: 470-860MHZRadio: (FM) 87.5 – 108 MHz and (DAB) 217.5 – 230 MHz.Satellite: DC – 200kHz and 950-2300MHz.The connector standard is ‘f’ for satellite, IEC 169-2 plug for TV and IEC 169-2 socket for Radio.

253


Wiring accessories

Telephone socket outletsIt is legal for a contractor to install a secondary telephone socket with associated wiring into house-holds with single exchange lines. The contractor may install a secondary socket and wire up to the master socket and wiring to the exchange. This does not include wiring the actual master socket or to the exchange itself. this final connection must be made by an approved installer.

For commercial and industrial installations a PBX (or PABX) internal exchange or ‘intelligent’ telephones are often fitted. In this case, the contractor may install all of the equipment except for the PBX unit installation. Again this must be carried out by a BSI approved installer and the interface between the PBX/PABX internal system and the incoming external lines must be connected by British Telecom.

GET telephone sockets are suitable for use in accordance with BS 7671, formerly the 16th Edition of the IEE Wiring regulations and should be wired in accordance with the diagrams shown.

Existing incoming

cable from PBX etc.

1st socket outlet(single master)

Additional socket outlet(s)(single secondary)

Example of typical connection1 Connection to 2 & 52 Earth recall (when used) connect to terminal 43 Connection to terminal 3 is not usually required

NB (a) Standard 4 wire cable is shown below as incoming cable. If terminals 1 and 6 (normally unused) are required, 6 wire cable may be used.

(b) All socket outlet connections are parallel – any number of socket outlets can be connected, but it is recommended that only a maximum of 5 telephones be used at any one time on one line.

254


56 Series plastic chemical resistant comparison chart

Product Type (Colour) All mounting enclosures(ie back box)

Grey transparentcovers and plugs

Resistant orange (RO)covers and plug s

Acids Weak Solutions Hydrochloric A A ANitric 10% A A AConcentrate Sulphuric Acid 100% A D D

Alkalis Weak Solutions Sodium Hydroxide 10% (Caustic Soda) A D BConcentrate Potassuim Hydroxide 100% A-B D DAutomotivePetroleum A D ALubricating Oils D AHydraulic Oil D A

Solvents Aliphatic hydrocarbons (alkanes)Methane B A APropane A A AAlcoholsEthelene Glycol A A AGlycerol (Glycerin) A C BMethyl Alcohol (Methanol) A D BEthyl Alcohol (Ethanol) A A AAminesAniline D D DAromatic HydrocarbonsMethyl Benzene D D BXylene D D BEthersDimethyl Ethyl A A AKetonesAcetone A D CAcetophenone D D CEthyl Methyl Ketone D D CMiscellaneousDetergent A A AInorganic Salts Magnesium Sulphate A A A

Oxidising agentsWeak Solution Sodium Hydrochlorite 5% A A AStrong SolutionHydrogen Peroxide 30% A A AWaterAmbient A A AHot >600C C A BSteam D D DThis table should be used as a guide only. Any end user should test to evaluate the suitability of any chemical with any plastic.

A ‑ ExcellentRecommended no adverse effects after extended exposure.

B ‑ GoodAcceptable minimal loss of mechanical properties after long periods of exposure.

C ‑ FairMarginal acceptability.

D ‑ PoorNot recommended for use.

255


Ingress Protection ratings

TEST PROTECTION

x No test applied No specifi c protection

0 No test appliedInherent degree of protection

1 Protected against drops of water falling vertically.

2

Protected against drops of water falling at up to 15 degrees from the vertical.

3Protected against spraying water at up to 60 degrees from the vertical.

4 Protected against splashing water from all directions.

5 Protected against jets of water from all directions.

6Protected against jets of water of similar force to heavy seas.

7 Protected against the effects of temporary immersion.

8 Protected against the effects of continuous immersion.

Defi ned by IEC 60529

PROTECTION AGAINST LIQUIDS

TEST PROTECTION



1

Protected against solid objects equal to or greater than 50mm diameter. (eg. accidental contact with hand)

2

Protected against solid objects equal to or greater than 12.5mm diameter.(eg. contact with fi nger)

3

Protected against solid objects equal to or greater than 2.5mm diameter. (eg. tools and wires)

4

Protected against solid objects equal to or greater than 1mm diameter.(eg. fi ne tools and wires)

5Protected against quantities of dust that could intefere with satisfactory operation.

6 Completely protected against dust.

Defi ned by IEC 60529DIN 40050 CEI 70-1

PROTECTION AGAINST SOLIDS

TEST PROTECTION



1 Protected against drops of water falling vertically.

2

Protected against drops of water falling at up to 15 degrees from the vertical.

3Protected against spraying water at up to 60 degrees from the vertical.

4 Protected against splashing water from all directions.

5 Protected against jets of water from all directions.

6Protected against jets of water of similar force to heavy seas.

7 Protected against the effects of temporary immersion.

8 Protected against the effects of continuous immersion.

Defi ned by IEC 60529

PROTECTION AGAINST LIQUIDS

TEST PROTECTION



1

Protected against solid objects equal to or greater than 50mm diameter. (eg. accidental contact with hand)

2

Protected against solid objects equal to or greater than 12.5mm diameter.(eg. contact with fi nger)

3

Protected against solid objects equal to or greater than 2.5mm diameter. (eg. tools and wires)

4

Protected against solid objects equal to or greater than 1mm diameter.(eg. fi ne tools and wires)

5Protected against quantities of dust that could intefere with satisfactory operation.

6 Completely protected against dust.

Defi ned by IEC 60529DIN 40050 CEI 70-1

PROTECTION AGAINST SOLIDS

256

Ceiling Mounted Wall Mounted Outdoor

Product Code SAEUEMSCUWE SAEUEMSCSAWE SAEUEMSCDBWE E751 E751R GUPA1411BSS GUP1411BSS E750WPRGY CCT56P004 CCT56P008

Product Description Single-Load 360° PIR and Ultrasonic Sensor

Single-Load 360° PIR Sensor

Dual-Load 360° PIR Sensor

Infrascan single-load 120° PIR sensor

Infrascan Single-load 120° PIR sensor

Ultimate screwless 90° PIR plate switch - with override

Ultimate screwless 90° PIR plate switch


Single-load 120° PIR sensor


Operating voltage 230V 50/60Hz 230V 50/60Hz 230V 50/60Hz 200-265V 50Hz 200-265V 50Hz 230V 50Hz 230V 50Hz 200-265V 50Hz 220-240V 50Hz 220-240V 50Hz

Field of view 360° 360° 360° 120° 120° 90° 90° 110° 120° 360°

Range 12m×18m at 2.5m height 7m at 2.5m height 7m at 2.5m height 6m x 6m, 8.5m from sensor head. Head rotatable through 120°

6m x 6m, 8.5m from sensor head. Head rotatable through 120°

5m at 1.2m height 5m at 1.2m height 18m at 2.4m height 12m (forward) 12m

Mounting Ceiling (surface / flush) Ceiling (surface / flush) Ceiling (flush) Ceiling (surface) Ceiling (surface) Wall (flush) Wall (flush) Wall or ceiling (surface)

Wall or ceiling (surface) Wall or ceiling (surface)

Single or Dual Load: Single Single Dual Single Single Single Single Single Single Single

IR Remote Control* SAEUEMSIR10T X X X X X X X X X

Incandescent 2000W 2000W 2000W 2A 10A 150W 150W 10A 1000W 1000W

Halogen lamps 230V 1000W 1000W 1000W 2A 10A 150W 150W 10A 900W 800W

Halogen w. Electronic transformer

1000VA 1000VA 1000VA 2A (iron core transformer only)

10A 150VA 150VA 10A 250VA 315VA

Fluorescent tubes 900VA/100µF 900VA/100µF 900VA/100µF X 10A X X 10A 200VA 250VA

Energy Saving lamps 900VA 900VA 900VA X 500W X X 500W 4 x 23W 4 x 23W


IP44 IP44 X X IP66 IP55 IP55



5 sec to 20 min(user adjustable)


15 sec – 30 min (through 7 time increments)



Approx 3 sec – 3 min, lower tolerance 2 – 6s


Time 2 (for HVAC): Adjust-able from 10 sec to 60 min


Test Mode Yes Yes Yes Yes Yes No No Yes Yes Yes

Lux setting 10 - 2000 Lux 10 - 2000 Lux 10 - 2000 Lux Continuous from 1 Lux to full sunlight

Continuous from 1 Lux to full sunlight

10 - 2000 Lux 10 - 2000 Lux Continuous from 1 Lux to full sunlight

5 – 2000 Lux 5 – 2000 Lux

Operating temp range 0°C to +50°C 0°C to +45°C 0°C to +45°C 0°C to +40°C 0°C to +40°C +5°C to +25°C +5°C to +25°C 0°C to +50°C -15°C to +40°C -15°C to +40°C

Connection 3-wires 3-wires 3-wires 2 wires 3-wires 2 wires 2 wires 3-wires 3-wires 3-wires


Yes Yes Yes No Yes Yes Yes Yes Yes Yes

Switching modes Auto/Off Manual on X Auto mode, manual override

Auto mode, manual override


X Auto mode, manual override






Ø 100 x 57mm(H) Ø 100 x 57mm(H) 88 x 88mm 88 x 88mm Mounting centres84mm

With corner bracket 164mm (L) x 80mm (W) x 75mm (H)without corner brackets140mm (L) x 80mm (W) x 75mm (H)

With corner bracket 170mm (L) x 88mm (W) x 76mm (H)without corner bracket142.5mm (L) x 88mm (W) x 76mm (H)


Occupancy sensors technical overview

257

Ceiling Mounted Wall Mounted Outdoor

Product Code SAEUEMSCUWE SAEUEMSCSAWE SAEUEMSCDBWE E751 E751R GUPA1411BSS GUP1411BSS E750WPRGY CCT56P004 CCT56P008

Product Description Single-Load 360° PIR and Ultrasonic Sensor

Single-Load 360° PIR Sensor

Dual-Load 360° PIR Sensor


Infrascan Single-load 120° PIR sensor

Ultimate screwless 90° PIR plate switch - with override

Ultimate screwless 90° PIR plate switch




Operating voltage 230V 50/60Hz 230V 50/60Hz 230V 50/60Hz 200-265V 50Hz 200-265V 50Hz 230V 50Hz 230V 50Hz 200-265V 50Hz 220-240V 50Hz 220-240V 50Hz

Field of view 360° 360° 360° 120° 120° 90° 90° 110° 120° 360°

Range 12m×18m at 2.5m height 7m at 2.5m height 7m at 2.5m height 6m x 6m, 8.5m from sensor head. Head rotatable through 120°

6m x 6m, 8.5m from sensor head. Head rotatable through 120°

5m at 1.2m height 5m at 1.2m height 18m at 2.4m height 12m (forward) 12m

Mounting Ceiling (surface / flush) Ceiling (surface / flush) Ceiling (flush) Ceiling (surface) Ceiling (surface) Wall (flush) Wall (flush) Wall or ceiling (surface)

Wall or ceiling (surface) Wall or ceiling (surface)

Single or Dual Load: Single Single Dual Single Single Single Single Single Single Single

IR Remote Control* SAEUEMSIR10T X X X X X X X X X

Incandescent 2000W 2000W 2000W 2A 10A 150W 150W 10A 1000W 1000W

Halogen lamps 230V 1000W 1000W 1000W 2A 10A 150W 150W 10A 900W 800W

Halogen w. Electronic transformer

1000VA 1000VA 1000VA 2A (iron core transformer only)

10A 150VA 150VA 10A 250VA 315VA

Fluorescent tubes 900VA/100µF 900VA/100µF 900VA/100µF X 10A X X 10A 200VA 250VA

Energy Saving lamps 900VA 900VA 900VA X 500W X X 500W 4 x 23W 4 x 23W


IP44 IP44 X X IP66 IP55 IP55










Time 2 (for HVAC): Adjust-able from 10 sec to 60 min


Test Mode Yes Yes Yes Yes Yes No No Yes Yes Yes

Lux setting 10 - 2000 Lux 10 - 2000 Lux 10 - 2000 Lux Continuous from 1 Lux to full sunlight

Continuous from 1 Lux to full sunlight

10 - 2000 Lux 10 - 2000 Lux Continuous from 1 Lux to full sunlight

5 – 2000 Lux 5 – 2000 Lux

Operating temp range 0°C to +50°C 0°C to +45°C 0°C to +45°C 0°C to +40°C 0°C to +40°C +5°C to +25°C +5°C to +25°C 0°C to +50°C -15°C to +40°C -15°C to +40°C

Connection 3-wires 3-wires 3-wires 2 wires 3-wires 2 wires 2 wires 3-wires 3-wires 3-wires


Yes Yes Yes No Yes Yes Yes Yes Yes Yes

Switching modes Auto/Off Manual on X Auto mode, manual override



X Auto mode, manual override






Ø 100 x 57mm(H) Ø 100 x 57mm(H) 88 x 88mm 88 x 88mm Mounting centres84mm

With corner bracket 164mm (L) x 80mm (W) x 75mm (H)without corner brackets140mm (L) x 80mm (W) x 75mm (H)

With corner bracket 170mm (L) x 88mm (W) x 76mm (H)without corner bracket142.5mm (L) x 88mm (W) x 76mm (H)


Occupancy sensors technical overview

258

Item Page No. Item Page No. Item Page No.

Alpha numerical index

400112 206400113 206400114 206301SMWE 219302SMWE 21930FLM15WE 21930FSWE 21930M20WE 21930M35WE 21930MBPNWE 21930MBPRWE 21930MBPWE 21930MD20WE 21930MIWE 21930NGR 21930NRD 21930PFMWE 21930PWE 21930RJ45SMA5SHWE 21930SFMOP 21930TKMWE 21930TV75MSWE 21930WE 21531J 21932E450LMWE 21932WE 219360BK 192360WE 192363BR 192363WE 19239MWE 2195632LEGY 2315632LERO 23156C313GY 23256CB4GY 23156CB4NGY 23156CB4NRO 23156CV313LEGY 22956E1GY 23156E1RO 23156E2GY 23156E2RO 23156E3GY 23156E3RO 23156E4GY 23156E4RO 23156E4VHGY 23156E6GY 23156E6RO 23156E8GY 23156E8RO 23156ES1GY 23156ES2GY 23156ES2RO 23156FA1GY 23256FA2GY 23256FA3GY 23256FA4GY 23256FCUGY 23256FCULEGY 22956JB1GY 23256L1GY 23156L2GY 23156P310GY 23056P313EO 230

56P313GY 23056P313RO 23056P315GY 23056PA332EO 23056PBS1LEGY 23056SO313GY 23256SO313LEGY 22956SO3166LEGY 23056SO3326LEGY 23056SO332GY 23256SO4166LEGY 23056SO4326LEGY 23056SO5166LEGY 23056SO520LEGY 22956SSW10LEGY 23056SSW15LEGY 23056SSW15LERO 23056SSW210LEGY 23056SSW215LEGY 23056SW110LEGY 22956SW110LERO 22956SW120LEGY 22956SW120LERO 22956SW132LEGY 22956SW220COLEGY 23056SW220LEGY 22956SW220LERO 22956SW232LEGY 22956SW232LERO 22956SW310LEGY 23056SW320LEGY 23056SW320LERO 23056SW332LEGY 23056SW332LERO 23056SW350LEGY 23056SW363LEGY 23056SW363LERO 23056SW420LEGY 230701WE 2179WE 219ADAPT2W 206ADAPT3WF 206ALB71322 81ALB71335 81CCT56P004 211CCT56P008 211CRA12W 205CRB2W 206CSC313 226CSO313 226CSO3132 226CSW120 226CSW1202 226CSW220 226E15DWE 214E15NWE 214E15WE 214E192030BK 192E192030MIBK 192E192030WE 192E1920MB1PN 110, 138, 192E1920MB2PN 110, 138, 192E1920MBR1PN 110, 138, 192E1920R30MIWE 192E1920R30WE 192

E238WE 217E251BP 218E251WE 218E25CESFNWE 214E25CESFWE 214E25DF32BP 218E25DF32WE 218E25DWE 214E25NWE 214E25SFWE 214E25WE 214E30FSGNWE 216E30FSGWE 216E30T6A 215E311SAWE 215E312SAWE 215E312XWE 217E319WE 215E31D20GEWE 216E31DFSGNWE 216E31DFSGWE 216E31IAWE 215E31RD400WE 215E31TBWE 216E31TV75WE 217E31TVFWE 217E31WE 219E31WP23SAWE 215E31WPWE 219E31XWE 217E322SAWE 215E32D20NGEWE 216E32TV75WE 217E32WE 219E332SAWE 215E33WE 219E34061MWE 217E34061SWE 217E342SAWE 215E34WE 219E35WE 219E4265WE 214E426WE 214E501SSWE 202E5512S 224E551SS 224E551US 224E5522S 224E552US 224E55CB 224E55GP 224E55PB 224E727WE 217E750WPRGY 211E751 210E751R 210E93PS6WE 202E93PS9WE 202E93WE 202E94WE 202ED4513NWE 216ED45NWE 216ED45WE 216ET01E 217ET238WE 217

259



ET36WE 219G45ACCU 187G45ACCUN 187G45CX 187GABAT 202GABATC 202GADAPTSVR 187GBAT 202GBATC 202GBATS 203GBG01 110, 138, 156, 172, 194, 198GBG02 110, 138, 156, 172, 194, 198GBG03 110, 138, 156, 172, 194, 198GBG04F 110, 138, 156, 172, 194, 198GBG04S 110, 138, 156, 172, 194, 198GBG06F 110, 138, 156, 172, 194, 198GBG06S 110, 138, 156, 172, 194, 198GBGS01 110, 138, 156, 172, 194, 198GBGS02 110, 138, 156, 172, 194, 198GBGS03 110, 138, 156, 172, 194, 198GBGS04S 110, 138, 156, 172, 194, 198GBGS06S 110, 138, 156, 172, 194, 198GBLANK1G 187GBLANK2G 187GCKR45A 187GCKR45A2G 187GCKRN45A 187GCKRN45A2G 187GD1G1W 185GD1G1W4 185GD1G2W 185GD1G2W4 185GD2G1W 185GD2G2W 185GD3G2W 185GD4G2W 185GDL1 206GDL2 206GE115P 207GE115S 207GE125P 207GE157P 207GE197P 207GE249P 207GE321P 207GE381P 207GE84S 207GE884S 207GEBAT 202GEBP6 207GEBP8 207GEBP9 207GEP1512*** 190GEP1512T** 190GEP1513*** 190GEP1514*** 190GEP1522*** 190GEP1522T** 190GEP1532*** 190GEP1542*** 190GEP2510*** 191GEP2511*** 191GEP3510*** 190GEP3520*** 190GEP3550*** 190

GEP3560*** 190GEP3580*** 190GEP4501*** 191GEP4520*** 191GEP4521*** 191GEP5500*** 191GEP5501*** 191GEP5510*** 191GEP5511*** 191GEP6512** 190GEP6512LV** 190GEP6522** 190GEP6522LV** 190GEP6532LV** 190GEP6542LV** 190GEP7510*** 192GEP7521** 192GEP7561*** 191GEP7562*** 191GEP7581** 192GEP7590*** 191GEP8510** 192GEP8520** 192GESPEND613 202GESPEND618 202GEURO1 102, 188GEURO2 188GEURO4 188GFOPLATE 186GGTKIT 111, 139, 157, 173, 193GJB20A 204GJB20ABR 204GJB30A 204GJB30ABR 204GJB5A 204GJB5ABR 204GJB620A 204GJB620ABR 137, 204GJBN20A 204GJBN20ABR 137, 204GJBN20ASBR 204GLHC 202GLHCS 203GLVD1G1W 186GLVD1G1W4 186GLVD1G2W 186GLVD1G2W4 186GLVD2G1W 186GLVD2G2W 186GMC131S 196GMC131SS 196GMC132S 196GMC132SS 196GMC13SP 197GMC13SPF 197GMC13SPN 197GMC13SPNF 197GMC13SSP 197GMC13SSPF 197GMC13SSPN 197GMC13SSPNF 197GMC20S 197GMC20SN 197GMC45S 197GMC45S2N 197

GMC45SN 197GMC51S 196GMC612 196GMC622 196GMC632 196GMCB1 197GMCB2 197GMCINT 196GMCPRCDFCU 196GMCPRCDSKT1G 196GMCPRCDSKT2G 196GMCS131S 196GMCS131SS 196GMCS132S 196GMCS132SS 196GMCS13SP 197GMCS13SPF 197GMCS13SPN 197GMCS13SPNF 197GMCS13SSP 197GMCS13SSPF 197GMCS13SSPN 197GMCS13SSPNF 197GMCS20S 197GMCS20SN 197GMCS45S 197GMCS45S2N 197GMCS45SN 197GMCS51S 196GMCS612 196GMCS622 196GMCS632 196GMCSB1 197GMCSB2 197GMCSINT 196GNSPUR 186GPAT1G16 188GPAT1G16A 188GPAT1G25 188GPAT1G47 188GPAT2G16A 188GPAT2G25 188GPAT2G47 188GPAT2GC25 188GPAT3G25 188GPATDG25 188GPEND6 202GPEND6C 202GPEND6S 203GPEND9 202GPEND9C 202GPULLGY 125GPULLRD 125GRGYWF01 124GRL13FCUPW 222GRL2020PW 222GRL202KPW 222GRL20DPKPW 222GRL20DPNPW 222GRLCOPW 222GRLINDRPW 222GRO 202GROC 202GRWH1012 108, 114GRWH1012GY 124

260



GRWH1014 108, 114GRWH1014GY 124GRWH1022 108, 114GRWH1022GY 124GRWH1032A 108, 114GRWH1032GY 124GSFOPLATE 186GSHVSKT 187GSKT15A1G 184GSKT1G 184GSKT2A1G 184GSKT2G 184GSKT5A1G 184GSKTCOAX 187GSKTCOAX2G 187GSKTSW15A1G 184GSKTSW1G 184GSKTSW2G2 184GSKTSW2GEX 184GSKTSW2GV 124GSKTSW3G 184GSKTSWDP1G 184GSKTSWDP2G 184GSKTSWDPOB2G 184GSPUR 186GSPUR3A 186GSPURHT 126, 186GSPURSS 126, 186GSPURTD 126, 186GSPURTR 126, 186GSPURWD 126, 186GSPURWDY 126, 186GSPURWM 126, 186GSW10VFLDR 95GSW1G1W 185GSW1G2W 185GSW1G2WR 185GSW1G2WRP 185GSW1GFP5BN 94GSW1GFP5PB 94GSW1GFP5PC 94GSW1GFP5PN 94GSW1GFP5PW 94GSW1GFP5SS 94GSW1GFP8BN 94GSW1GFP8PB 94GSW1GFP8PC 94GSW1GFP8PN 94GSW1GFP8PW 94GSW1GFP8SS 94GSW2G2W 185GSW2GFP5BN 94GSW2GFP5PB 94GSW2GFP5PC 94GSW2GFP5PN 94GSW2GFP5PW 94GSW2GFP5SS 94GSW2GFP8BN 94GSW2GFP8PB 94GSW2GFP8PC 94GSW2GFP8PN 94GSW2GFP8PW 94GSW2GFP8SS 94GSW3G2W 185GSW4G2W 185

GSWA1G2W 185GSWA2G2W 185GSWCDR35 95GSWCRR5A 95GSWDP20A 186GSWDP20AFO 186GSWDP20AFOAC 126, 186GSWDP20AFOHT 126, 186GSWDP20AFOTR 126, 186GSWDP20AHT 126, 186GSWDP20AOV 126, 186GSWDPN20A 186GSWDPN20AFO 186GSWDPN20AFOAC 126, 186GSWDPN20AFOHT 126, 186GSWDPN20AFOTR 126, 186GSWDPN20AFOWH 186GSWDPN20AHT 126, 186GSWDPN20AOV 126, 186GSWFDR35 95GSWHC5 94GSWHC8 94GSWINT 185GSWISO2 185GSWNSPUR 186GSWNSPURBO 126, 186GSWNSPURCH 126, 186GSWNSPURDW 126, 186GSWNSPUREF 126, 186GSWNSPURFA 126, 186GSWNSPURFFZ 126, 186GSWNSPURFR 126, 186GSWNSPURFZ 126, 186GSWNSPURHO 126, 186GSWNSPURHT 126, 186GSWNSPURMW 126, 186GSWNSPURTD 126, 186GSWNSPURWD 126, 186GSWNSPURWDY 126, 186GSWNSPURWM 126, 186GSWPULL45 203GSWPULL45N 203GSWPULL6 203GSWPULL62 203GSWSPUR 186GSWSPURBO 126, 186GSWSPURCH 126, 186GSWSPURDW 126, 186GSWSPUREF 126, 186GSWSPURFA 126, 186GSWSPURFFZ 126, 186GSWSPURFR 126, 186GSWSPURFZ 126, 186GSWSPURHO 126, 186GSWSPURHT 126, 186GSWSPURMW 126, 186GSWSPURTD 126, 186GSWSPURWD 126, 186GSWSPURWDY 126, 186GSWSPURWM 126, 186GSWTPS 185GSWWC5 94GSWWC8 94GSWWDR30 95GSWWDRFPBN 94

GSWWDRFPPB 94GSWWDRFPPC 94GSWWDRFPPN 94GSWWDRFPPW 94GSWWDRFPSS 94GTELMAS 187GTELRJ11 187GTELRJ45 187GTELSEC 187GU1011 108, 114GU1012 108, 114GU1012A 108, 114GU1012GY 124GU1012R 108, 114GU1012RGY 124GU1012RP 108, 114GU1013 108, 114GU1014 108, 114GU1014GY 124GU1022 108, 114GU1022A 108, 114GU1022GY 124GU1032 108, 114GU1032GY 124GU1042 108, 114GU1062 108, 114GU1212*** 160GU1212R**** 160GU1212T** 160GU1213*** 160GU1214*** 160GU1222*** 160GU1222T** 160GU1232*** 160GU1232T** 160GU1242*** 160GU1242T** 160GU1262*** 160GU1400F 142GU1412*** 142GU1412K*** 144GU1412R*** 142GU1412T** 142GU1413*** 142GU1414*** 142GU1422*** 142GU1422T** 142GU1432*** 142GU1432T** 142GU1442*** 142GU1442T** 142GU1462*** 142GU1512*** 175GU1513*** 175GU1514*** 175GU1522*** 175GU1532*** 175GU1542*** 175GU2003 108, 115GU2010 108, 115GU2010GY 124GU2010HT 116, 127GU2010OV 116, 127GU2011 108, 115GU2011HT 116, 127

261



GU2011OV 116, 127GU2011TR 116, 127GU2013 108, 115GU2013AC 116, 127GU2013HT 116, 127GU2013TR 116, 127GU2014 108, 115GU2014AC 116, 127GU2014HT 116, 127GU2014WH 108, 115GU2033 108, 115GU2210*** 161GU2211*** 161GU2213*** 161GU2214*** 161GU2214WH*** 161GU2410*** 144GU2411*** 144GU2413*** 144GU2414*** 144GU2414WH*** 144GU2511*** 176GU2513*** 176GU3010 108, 113GU3010D 108, 113GU3010DGY 124GU3010DRD 125GU3011 108, 113GU3020 108, 113GU3020D 108, 113GU3021 108, 113GU3030 108, 113GU3030GY 124GU3030RD 125GU3031 108, 113GU3032 108, 113GU3033 108, 113GU3034 108, 113GU3050 108, 113GU3060 108, 113GU3060RD 125GU3070 108, 114GU3080 108, 114GU3090 108, 114GU3091 108, 114GU3210*** 159GU3210D*** 159GU3211*** 159GU3220*** 159GU3220D*** 159GU3221*** 159GU3231*** 159GU3234*** 159GU3250*** 159GU3251*** 160GU3252*** 160GU3260*** 159GU3270*** 159GU3280*** 159GU3290*** 159GU3410*** 141GU3410D*** 141GU3411*** 141GU3420*** 141

GU3420D*** 141GU3420D***MP 142GU3420DMP 142GU3420DWPCMP 142GU3420DWPWMP 142GU3421*** 141GU3431*** 141GU3434*** 141GU3450*** 141GU3460*** 141GU3470*** 141GU3480*** 141GU3490*** 141GU3510*** 175GU3520*** 175GU3531*** 175GU3580*** 175GU3631GMC 196GU3631GMCS 196GU4000 109, 117GU4001 109, 117GU4010 109, 117GU4011 109, 117GU4020 109, 117GU4021 109, 117GU4031 108, 115GU4050 109, 117GU4201*** 162GU4221*** 162GU4231*** 161GU4401*** 144GU4421*** 144GU4431*** 144GU4501*** 176GU4521*** 176GU5000 109, 116GU50003 109, 116GU5000HT 116, 127GU5000MW 116, 127GU5000RD 125GU5000SS 116, 127GU5000TD 116, 127GU5000TR 116, 127GU5000WD 116, 127GU5001 109, 116GU5003 109, 116GU50033 109, 116GU5003TR 116, 127GU5004 109, 116GU5010 109, 116GU5010BO 116, 127GU5010CH 116, 127GU5010DW 116, 127GU5010EF 116, 127GU5010FA 116, 127GU5010FFZ 116, 127GU5010FR 116, 127GU5010FZ 116, 127GU5010GY 124GU5010HO 116, 127GU5010HT 116, 127GU5010MW 116, 127GU5010RD 125GU5010TD 116, 127GU5010WD 116, 127

GU5010WM 116, 127GU5011 109, 116GU5011BO 116, 127GU5011CH 116, 127GU5011DW 116, 127GU5011EF 116, 127GU5011FA 116, 127GU5011FFZ 116, 127GU5011FR 116, 127GU5011FZ 116, 127GU5011GY 124GU5011HO 116, 127GU5011HT 116, 127GU5011MW 116, 127GU5011TD 116, 127GU5011WD 116, 127GU5011WM 116, 127GU5013 109, 116GU5014 109, 116GU5200*** 162GU5203*** 162GU5210*** 162GU5211*** 162GU5213*** 162GU5214*** 162GU5400*** 144GU5403*** 144GU5410*** 144GU5411*** 144GU5413*** 144GU5414*** 144GU5500*** 176GU5510*** 176GU5511*** 176GU5514*** 176

GU6000RC1149, 160, 167,

180GU6011 108, 115GU6011LV 108, 115GU6012 108, 115GU6012LV 108, 115GU6022 108, 115GU6022LV 108, 115GU6032 108, 115GU6032LV 108, 115GU6042 108, 115GU6042LV 108, 115GU6211** 161GU6211LV** 161GU6212** 161GU6212LV** 161GU6212R*** 160GU6222** 161GU6222LV** 161GU6232** 161GU6232LV** 161GU6242** 161GU6242LV** 161GU6411** 143GU6411LV** 143GU6412** 143GU64121** 143GU6412E*** 143GU6412LV** 143GU6412R*** 143

262



GU6422** 143GU6422E*** 143GU6422LV** 143GU6432** 143GU6432LV** 143GU6442** 143GU6442LV** 143GU6512** 175GU6522** 175GU6532** 175GU7010 109, 118GU7020 109, 118GU7021 109, 118GU7030 109, 118GU7040 109, 118GU7051 109, 117GU7061 109, 117GU7062 109, 117GU7071 109, 118GU7072 109, 118GU7074 109, 118GU7081 109, 118GU7090 109, 117GU7210*** 163GU7220*** 163GU7230*** 163GU7251*** 163GU7261*** 163GU7262*** 163GU7271*** 163GU7290*** 162GU7410*** 145GU7420*** 145GU7430*** 145GU7451*** 145GU7461*** 145GU7462*** 145GU7471*** 145GU7490*** 145GU7510*** 177GU7561*** 177GU7562*** 177GU7590*** 176GU8010 109, 118GU8020 109, 118GU8210** 163GU8220** 163GU8250** 164GU8260** 164GU8280** 164GU8410** 145GU8420** 145GU8432BN 84GU8432PB 84GU8432PC 84GU8432PN 84GU8432PW 84GU8432SS 84GU8434BN 16GU8434PB 16GU8434PC 16GU8434PN 16GU8434PW 16GU8434SS 16GU8450** 146

GU8460** 146GU8480** 146GU8510** 177GU8520** 177GU8550** 181GU8560** 181GU8580** 181GU9116 119GU9125 119GU9135 119GU9147 119GU9225 119GU9235 119GU9247 119GU9D25 119GUE7000* 119, 146, 164, 181, 188GUE7001* 119, 146, 164, 181, 188GUE7010* 119, 146, 164, 181, 188GUE7011* 119, 146, 164, 181, 188GUE7012* 119, 146, 164, 181, 188GUE7020* 119, 146, 164, 181, 188GUE7030* 119, 146, 164, 181, 188GUE7040* 119, 146, 164, 181, 188GUE7051* 119, 146, 164, 181, 188GUE7061* 119, 146, 164, 181, 188GUE7062* 119, 146, 164, 181, 188GUE7071* 119, 146, 164, 181, 188GUE7072* 119, 146, 164, 181, 188GUE7075* 119, 146, 164, 181, 188GUE7081* 119, 146, 164, 181, 188GUE7082* 119, 146, 164, 181, 188GUE7091* 119, 146, 164, 181, 188GUE8010* 119, 146, 164, 181, 188GUG01G 118GUG01G** 164GUG01GGY 125GUG01GMC 197GUG01GSMC 197GUG02G 118GUG02G** 164GUG02GGY 125GUG02GMC 197GUG02GSMC 197GUG03G 118GUG03G** 164GUG03GGY 125GUG03GMC 197GUG03GSMC 197GUG04G 118GUG04G** 164GUG04GGY 125GUG04GMC 197GUG04GSMC 197GUG06G 118GUG06G** 164GUG06GMC 197GUG06GSMC 197GUG08G 118GUG08G** 164GUG08GMC 197GUG08GSMC 197GUG09G 118GUG09G** 164GUG09GMC 197GUG09GSMC 197

GUG101MB 147, 165, 178GUG101MW 147, 165, 178GUG101W 198GUG102MB 147, 165, 178GUG102MW 147, 165, 178GUG102R*** 148, 166, 179GUG102RW 198GUG102T** 148, 166, 179GUG102W 198GUG10IMB 147, 165, 178GUG10IMW 147, 165, 178GUG10IT*** 148, 166, 179GUG10IW 198GUG12G 118GUG12G** 164GUG12GMC 197GUG12GSMC 197GUG13FCU*** 149, 167, 180GUG13FCUWPW 198GUG16CO*** 149, 167, 180GUG16COWPW 198GUG18G 118GUG18G** 164GUG18GMC 197GUG18GSMC 197GUG201MB 147, 165, 178GUG201MW 147, 165, 178GUG201W 198GUG2020MB 147, 165, 178GUG2020MW 147, 165, 178GUG2020W 198GUG202K*** 148, 166, 179GUG202KEL*** 148, 166, 179GUG202KELWPW 198GUG202KWPW 198GUG202MB 147, 165, 178GUG202MW 147, 165, 178GUG202OC*** 148, 166, 179GUG202W 198GUG20DPBOW 199GUG20DPCHW 199GUG20DPDWW 199GUG20DPEFW 199GUG20DPFAW 199GUG20DPFFZW 199GUG20DPFRW 199GUG20DPFZW 199GUG20DPHOW 199GUG20DPHTW 199GUG20DPK*** 148, 166, 179GUG20DPKELWPW 198GUG20DPKWPW 198GUG20DPMB 147, 165, 178GUG20DPMW 147, 165, 178GUG20DPMWW 199GUG20DPOVW 199GUG20DPTDW 199GUG20DPW 198GUG20DPWDW 199GUG20DPWDYW 199GUG20DPWMW 199GUG24G 118GUG24G** 164GUG24GMC 197GUG24GSMC 197

263



GUGB*** 149, 167, 180GUGBB 149, 167, 180GUGBW 149, 167, 180, 199GUGCO*** 148, 166, 179GUGCOWPW 198GUGEMDIM***16 149, 167, 180GUGEMRDIMB16 149, 167, 180GUGEMRDIMW16 149, 167, 180GUGEMW*** 149, 167, 180GUGINDBG 149, 167, 180GUGINDBO 149, 167, 180GUGINDBR 149, 167, 180GUGINDWG 149, 167, 180, 199GUGINDWO 149, 167, 180, 199GUGINDWR 149, 167, 180, 199GUGKSK 111, 139, 157, 173, 193GUGL01** 181GUGL02** 181GUGL03** 181GUGL04** 181GUGL06** 181GUGL08** 181GUGR** 147, 165, 178GUGRBO** 147, 165, 178GUGRCH** 147, 165, 178GUGRDW** 147, 165, 178GUGREF** 147, 165, 178GUGRFA** 147, 165, 178GUGRFR** 147, 165, 178GUGRFRFZ** 147, 165, 178GUGRFZ** 147, 165, 178GUGRHE** 147, 165, 178GUGRHO** 147, 165, 178GUGRJ11*** 148, 166, 179GUGRJ11WPW 198GUGRJ45*** 148, 166, 179GUGRJ45WPW 198GUGRMW** 147, 165, 178GUGROV** 147, 165, 178GUGRTD** 147, 165, 178GUGRWD** 147, 165, 178GUGRWDY** 147, 165, 178GUGRWH** 147, 165, 178GUGRWM** 147, 165, 178GUGS01G** 146GUGS02G** 146GUGS03G** 146GUGS04G** 146GUGS06G** 146GUGS08G** 146GUGS09G** 146GUGS12G** 146GUGS18G** 146GUGS24G** 146GUGSAT*** 148, 166, 179GUGSATWPW 198GUGSHK 111, 139, 157, 173, 193GUGTELM*** 148, 166, 179GUGTELMWPW 198GUGTELS*** 148, 166, 179GUGTELSWPW 198GUMSCO 109, 118GUP1411BSS 210GUPA1411BSS 210GWP1612 223

GWP1614 223GWP1622 223GWP1632 223GWP2010 223GWP2011 223GWP3010 223GWP3020 223GWP3050 223GWP3060 223GWP9000 222GWPIU3020 222GWPIU3020R 222GWPIU3020RP 222GWPIU3050 222GWPIU3060 222GWPIUKIT 222KBR251W 205KBR321W 205KBR322W 205KBS252W 205KBU321W 205KBU322W 205KBU441W 205LMCSKT1GR 196LMCSKT2GR 196LMCSKT2GRP 196LSKT1GR 184LSKT2GR 184LSKT2GRP 184MMB251W 204MMB252SW 204MMB252W 204MTAU1W 205MTAU2W 205MTAU3W 205MTN486114 83MTN486160 83MTN50100011 88MTN50110011 86MTN50110012 87MTN50120011 86MTN50150011 89MTN50160012 85MTN50180010 89MTN50510000 82MTN505114 84MTN505160 84MTN50521100 91MTN505214 84MTN50523119 90MTN50523160 90MTN505260 84MTN505599 81MTN505919 81MTN505960 81MTN50600119 87MTN506004 85MTN50610119 88MTN506119 84MTN506219 84MTN506801 82MTN508014 83MTN508060 83MTN508119 83MTN515119 83

MTN542895 91MTN550619 28MTN570222 12MTN60030001 38MTN6003-0002 39MTN60030003 61MTN60030004 54MTN60030005 70MTN60030006 55, 71MTN60050001 29MTN617119 15MTN617219 15MTN617419 16MTN617519 17MTN618319 17MTN618320 17MTN618419 17MTN618420 17MTN62120319 66MTN62120414 66MTN62120460 66MTN62210319 68MTN62210414 68MTN62210460 68MTN62410319 67MTN62410414 67MTN62410460 67MTN62600007 64MTN62700003 65MTN62700019 65MTN62700022 65MTN62700119 64MTN62700122 64MTN62703619 65MTN62703714 65MTN62703719 65MTN62703721 65MTN62703722 65MTN62703760 65MTN627514 15MTN627560 15MTN627614 15MTN627660 15MTN627814 16MTN627860 16MTN627914 17MTN627960 17MTN629993 38MTN630419 28MTN630614 28MTN630660 28MTN630719 23, 26MTN630760 23, 26MTN630819 23, 27MTN630860 23, 27MTN630919 23, 27MTN630960 23, 27MTN631619 24, 25MTN631719 24, 26MTN632519 24, 25MTN632569 24, 25MTN632614 24, 25MTN632660 24, 25MTN632714 24, 26MTN632760 26

264



MTN639125 72MTN639126 73MTN639150 74MTN639178 74MTN639180 74MTN644492 18, 20MTN644592 18, 21MTN644692 19, 22MTN644792 19, 21MTN644892 19, 21MTN644992 19, 22MTN645094 69MTN645129 70MTN646630 56, 58MTN646704 48, 52MTN646808 34, 36, 43MTN646991 62MTN647091 62MTN647393 35, 37, 40MTN647395 35, 37, 41MTN647593 35, 37, 42MTN647595 35, 37, 42MTN647893 35, 37, 44MTN647895 35, 37, 45MTN648493 35, 37, 46MTN648495 35, 37, 47MTN648704 48, 52MTN649202 34, 36, 39MTN649204 34, 36, 41MTN649208 34, 36, 43MTN649212 34, 36, 46MTN649310 57, 58MTN649315 56, 60MTN649325 57, 60MTN649330 57, 59MTN649350 57, 59MTN649704 48, 52MTN649802 49, 51MTN649804 49, 53MTN649808 49, 53MTN649908 34, 36, 49, 50MTN649912 34, 36, 49, 51MTN663529 75MTN663591 31MTN663592 31MTN663593 32MTN663594 30, 33MTN663595 32MTN663596 29, 32MTN663692 31MTN663990 29MTN663991 28MTN663992 30MTN668990 11MTN668991 11MTN670802 18, 20MTN670804 18, 20MTN67250001 14MTN676090 13MTN677290 33MTN680204 12MTN680329 12MTN681829 14MTN682191 33MTN682192 33

MTN682291 63MTN682292 63MTN682991 30MTN683816 8, 9MTN683832 8, 10MTN683890 8, 10MTN683901 11MTN684016 8, 9MTN684032 8, 10MTN684064 8, 10MTN689701 12MTN689702 12MTN69210001 69MTN693003 74MTN693004 74PBR332W 205PBU441W 205SAEUEMSCDBWE 210SAEUEMSCSAWE 210SAEUEMSCUWE 210SAEUEMSIR10T 210SB161 206SB251 206SB252 206SB351 206SB352 206SB471 206SB472 206TBR321W 204TBR322W 204TBU321W 204TBU322W 204TBU441W 204TOP133A 206TOP13A 206TOP15AR 206TOP2AR 206TOP5AR 206U101DFR400XBL1 98U102RWM001XBS1 99U102RWM001XCG1 99U102RWM001XGL1 99U102RWM001XPW1 99U105RHH001BPW1 99U106RWM001XBS1 99U106RWM001XCG1 99U106RWM001XGL1 99U106RWM001XPW1 99U10XARR001210 99U201DST600001 98U201SPMDPB00 99U201SRY2KW001 98U202DST600001 98U202SRY2KW001 98UAX003 99UAX004 98UC15XBS 99UC15XCG 99UC15XGL 99UC15XPW 99UC21DMXBS 98UC21DMXCG 98UC21DMXGL 98UC21DMXPW 98UC21DPPXGL 99

UC21SWXBS 98UC21SWXCG 98UC21SWXGL 98UC21SWXPW 98UC22DMXBS 98UC22DMXCG 98UC22DMXGL 98UC22DMXPW 98UC22SWXBS 98UC22SWXCG 98UC22SWXGL 98UC22SWXPW 98UC31RJXBS 99UC31RJXGL 99UC31TVXGL 99UC32TDXGL 99UCT25XBS 99UCT25XCG 99UCT25XGL 99UCT25XPW 99UHEXS** 111, 139, 157, 173, 193US155000 99US155XGL 99US15A00 99US15B00 99US31RJ000 99US31TV000 99US32TD000 99USCREW50** 163UST25A00 99UST25B00 99VDI552012 102VDIR528010 102VDIR534810 102VDIR534830 102VDIR542111 103VDIR547402 103VDIR547403 103VDIR547404 103VDIR547405 103VDIR547406 103VDIR580010 103VDIR580020 103VDIR580021 103VDIR593001 102VDIR643003 103VDIR647402 102WHB320RG 226WHB340RG 226WHB355RG 226WHC363RG 226

265

Notes

266

Notes

UK contact details -

0870 608 8 608Fax 0870 608 8 606

Ireland contact details -

01 601 2200Fax 01 601 2201

As a global specialist in energy management with operations in more than 100 countries, Schneider Electric offers integrated solutions across multiple market segments, including leadership positions in Utilities & Infrastructures, Industries & Machine Manufacturers, Non-residential Buildings, Data Centres & Networks and in Residential.

Focused on making energy safe, reliable, efficient, productive and green, the Group’s 130,000 plus employees achieved sales of 22.4 billion euros in 2011, through an active commitment to help individuals and organisations make the most of their energy.

We are changing our brand names and becoming one Schneider Electric. You’ll get the same great quality products, but from one name you can remember and trust. This provides you and your customers with the reassurance associated with Schneider Electric.

Some of our market leading brands have already become Schneider Electric including Merlin Gerin, Telemecanique, Square D, GET, Mita, Sarel, Himel, Thorsman, Tower and TAC.

Working as one Schneider Electric makes it clearer that our ranges are highly compatible for integrated solutions.

Schneider Electric Ltd

Schneider Electric Limited is a company registered in England and Wales.Registered number: 1407228. Registered office: Stafford Park 5, Telford, Shropshire TF3 3BL.

© 2011 Schneider Electric. All Rights Reserved. Schneider Electric, Active Energy Management, Compact, EcoStruxure, ION Enterprise, iRIO, Make the most of your energy, Masterpact, Micrologic, Power Plant To Plug, Modbus, and PowerLogic are owned by Schneider Electric Industries SAS, or its affiliated companies in the United States and other countries. 998-3432.

As standards, specifications and designs change from time to time, please ask for confirmation of the information given in this publication. S

E75

99 J

UN

201

2

United KingdomStafford Park 5, TelfordShropshire TF3 3BLTel: 0870 608 8 608Fax: 0870 608 8 606www.schneider-electric.com/uk

IrelandHead office, Block aMaynooth Business CampusMaynooth, Co. KildareTel: (01) 601 2200Fax: (01) 601 2201www.schneider-electric.com/ie

member of

Documents

Schneider Electric wiring devices, lighting control & automation