Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Sl.
No. Quantity TNBP
No.
Rate Both in figures
and in words (Rs.)Unit
Amount
(In Rupees)
1 79Nos
(Seventy
nine
numbers
only)
1No
(Each)
Schedule - "A" NAME OF THE WORK: Providing street Light arrangements and Jungle clearance in SIPCOT Industrial Complex /Growth Centres/Park at
Perundurai, Hosur, Siruseri, Ranipet and Gummidipoondi.
EMD :
Rs.3,77,000/-
Tender Date : 06.11.2019
Description of Work
Section A
Special Repairs to street lights system at Phase II,Expn-I&II in SIPCOT Industrial Complex at Hosur
Supply, installation, testing and commissioning of90wLED street
lights(make like Heavells,crompton,Bajaj,Philips or equivalent)
consisting of separate optical and control gear, having IP 65 or
better rating, enclosure made of pressure die casting aluminum
having toughned glass, Input voltage range of 90 to 270 V AC and
Input frequency range of 47 to 63 HZ, PF > 0.9 (lag), external surge
protection up to 10 K.V. It shall have CRI > 70 and color
temperature range between 3000 - 6000 deg K.LED chips shall be
high power 2 W CREE/ NICHIA OR equivalent having efficiency of not
less than 100 lumens / watt and junction temp. not exceeding 85
Deg celsius with life of 50000 hours having warranty not less than 5
years. LEDs should be arranged in combination of series and parallel
connections: power electronic circuits shall have protection for short
circuit , over voltage, over current and over temperature. Thickness
of the fixtures not to exceed 70mm, weight shall not exceed 8 kg
etc., the fixtures shall be conforming to Indian standards or
International standards CE / UL etc., and all materials used in
manufacture shall be RoHS compliant etc., complete Including
dismantling of Existing fittings and as directed by SIPCOT Officers.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
2
a 8Cum
(Eight
cubic metre
only)
1 Cum
(one cubic
metre)
b 0.60Cum
(Zero point
six zero
cubic metre
only)
1 Cum
(one cubic
metre)
11m street light pole foundation arrangements as per following
specifications
Earth work excavation for foundation in all classes of soils such as
sand silt or other loose soilshard stiff clay, stiff black cotton soil,
hard red earth, shales, murram, gravel, stoney earth and earth
mixed with small size boulders etc. except hard rock requiring
blasting as per SS 20-B (HGS SS.20.B.) and depositing the same to
the low lying area /median, foot path portion(only good earth to be
deposited in median and foot path portion for the required quantity)
as directed by Engineer in charge with initial lead of 10m and lift of
2m etc. complete as per standard specification and as directed by
the SIPCOT officers.
Providing plain Cement Concrete 1:4:8 (One cement, Four sand and
Eight aggregate) using 40mm size Hard broken granite stone jelly
for foundation, flooring bed, dummy columns, mudmat below
column footings, Grade beams etc. laid in layers not exceeding 15cm
thick including cost and conveyance of all materials and labour to
work site, mixing of concrete, laying, compacting, curing with all
leads for soft potable water, hire and fuel charges for all tools and
plants including all other incidental charges such as bailing out water
for forming protective bunds, coffer dams and shoring, strutting etc.
complete complying with standard specifications and as directed by
"SIPCOT" officers. (in all heights and all depths)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
c 4Cum
(Four cubic
metre only)
1 Cum
(one cubic
metre)
d 30Sqm
(Thirty
square
meter only)
1 Sqm
(one
square
metre)
Providing Reinforced Cement Concrete 1:1 1/2:3 (One cement, One
and a half sand and three jelly) using Machine crushed 20mm size
Hard Broken granite ISS stone Jelly for all "REINFORCED CEMENT
CONCRETE WORKS" including cost and conveyance of all materials
and labour to work site excluding cost of centering, shuttering,
strutting and cost of MS / RTS Reinforcement grills placed in position
but including machine mixing of concrete, laying, vibrating with
mechanical vibrators, finishing, curing, including cost of soft potable
water treatment of bearing [(i.e.) Junction of walls / beams and
slabs] smooth with cement mortar 1:3 (One cement and Three sand)
and kraft paper laid over it without claim for extra and and all labour
charges for mixing concrete, laying, curing, vibrating charges, hire
charges for all tools and plants and all other incidental charges etc.
complete complying with standard specifications and as directed by
"SIPCOT" officers.
Supplying and erecting steel centering for sides and soffits including
supports and strutting for all concrete works in all floors using mild
steel BG 10 sheets of size 90 cm x 60 cm stiffened with welded mild
steel angles of size 25mm x 25mm x 3mm for boarding laid over
silver oak (country wood) joists of size 10cm x 6.5cm spaced at
about 90cm centre to centre and supported by casurina props of 10
cm to 13cm dia spaced at 75cm centre to centre etc., Complete
complying with standard specification and as directed by SIPCOT
Officers. For vertical surfaces.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
e 3Qtl
(Three
Quintal only)
1 Qtl
(One
Quintal)
3 3 Nos
(Three
numbers
only)
1 No
(One
Number)
Supplying, Fabricating and placing in position steel
reinforcement grills using M.S. / R.T.S. rods of all sizes of
reinforcement for all Reinforced cement concrete works
including cost and conveyance of steel, binding wire,spacer
bars, cover blocks, labour charges for unbending of rods,
straighteing, cutting, fabricating, tying, lifting, placing in
position, overlaping to the required length whereever
necessary cover blocks and all other incidental charges etc.
complete complying with standard specifications and as
directed by "SIPCOT" officers. (The steel rods must be Fe 415
grade of any brand with ISI marking and necessary test
certicate to be produced before using it at site)
Fabrication, supply and installation of outdoor street lighting
service pillar box of size 900 mm x 900 mm x 300 mm made
out of 16 SWG MS sheet steel fitted with required size of
wooden plange board 1 No. 100 A main switch 3nos of 100A
fuse unit suitable copper bus bars for neutral line
etc.complete.The pillar box fabricated with front double door
arrangements with locking facility painted with one coat of
primer and two coats of Aluminium finish.The pillar to be
installed in angle iron frame pedestal with concrete grouting
etc. complete including cost and conveyance of all materials
and labour including pedestal concrete and angle iron frame
pedestal etc. complete and as directed by SIPCOT Officials.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
4 3Nos
(Three
numbers
only)
Fabrication, Supply, installation of outdoor TNEB service
connection pillar box of size 1250mm X 900mm X 300mm
made out of 16 SWG sheet steel metal with locable door
incorporated with 1 No. 100 amps TPN rewireable fuse switch
and 32 Amps 4 way fuse DB with 12 Nos. 63A porcelain fuse
cut outs only with 1 No. copper earth link and neutral link and
1 No. of 63 Amps TP contactor with 230 holes coil and 24
hours and 1 No. of timer of L & T make or equilant with its
control wiring, power interconnection with 7/16 copper wire
from main switch to contactor and contactor to fuse DB etc.
complete. The pillar painted with one coat of red oxide and 2
coats of aluminium finish as required by TNEB etc. The pillar
to be installed in angle iron frame pedestal with concrete
grouting etc. complete and as directed by SIPCOT Officers.
1No
(Each)
5 Supplying and fixing of the following UG cable in a trench to
be excavated at adepth of 0.75m putting 30cm layer of M
sand and refilling with earth to make good etc., as per
specification the price shall also be inclusive of all end
termination jointing as required at site. Necessary cable
brackets shall also be taken into account for the cables to be
brought into feeder pillars and lighting cable as per IS 1554
(Pt-II) etc complete complying to appropriate specification /
standard and as directed by SIPCOT Officers.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
a 18RM
(Eighteen
running
metre only)
3.5core x70sq.mm Al.Armoured UG cable from service box to
pillar box
1 Rm
(One
Running
metre)
b 2500RM
(Two
thousand
five hundred
running
metre only)
4core x16sq.mm Al.Armoured UG cable for pole 1 Rm
(One
Running
metre)
6 Supplying and fixing of the following UG cable Gland with
connection and cable fixing in the MS switch board of the pole
and pillar Box main etc. complete and as directed by SIPCOT
Officials.
a 9Nos
(Nine
numbers
only)
3.5core x70sq.mm Al.Armoured UG cable from service box to
pillar box
1No
(Each)
b 170Nos
(One
hundred and
seventy
numbers
only)
4core x25sq.mm Al.Armoured UG cable for pole 1No
(Each)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
7 3 Nos
(Three
numbers
only)
Earthing as per ISI specification with an earth elctrode of 2.5
m class "B" GI Pipe of dia not less than 40 mm with copper
earth plate of size 125 mm x 50 mm x 6 mm with necessary
funneling arrangements with necesssary masonry work and
with 38 mm RCC cover slab for the brick masonry with
appropriate specification / standards and as directed by
SIPCOT Officers.
1No (Each)
8 135RM
(One
hundred and
thirty five
running
metre only)
Supply,delivery and laying of 90mm dia. HDPE pipes including
cost and laying charges into trenches etc. complete complying
with appropriate specification / standards and as directed by
SIPCOT Officers etc. complete.
1 Rm
(One
Running
metre)
9 7 Nos
(Seven
numbers
only)
Removing of existing 11mtr bended street light pole, supply
and welded on the bottom of old pole with suitable size of
6mm thick M.S.plate including erection etc. complete
complying with appropriate specification / standards and as
directed by SIPCOT Officers etc. complete.
1No
(Each)
10 73Nos
(Seventy
three
numbers
only)
Removing of existing connector box, rusted 4way connector,
porcelin fuse unit, painting with aluminium paint on the box
and supply and fixing of 4 way connector, 6A DP MCB with
rail. The connector box re-erection on the pole etc. complete
complying with appropriate specification / standards and as
directed by SIPCOT Officers etc. complete.
1No
(Each)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
11 79Nos
(Seventy
nine
numbers
only)
Supply and erection of connector box water proof type made
out of 16 SWG CRCA sheet metal comprising of 1 NO 6A DP
MCB with rail, 4 WAY connector etc. complete complying with
appropriate specification / standards and as directed by
SIPCOT Officers etc. complete.
1No
(Each)
12 79Nos
(Seventy
nine
numbers
only)
Removing of existing street light fitting and aluminium wire in
the pole etc. complete complying with appropriate
specification / standards and as directed by SIPCOT Officers
etc. complete.
1No
(Each)
13 250RM
(Two
hundred and
fifty running
metres only)
Supply and laying of 10SWG GI wire for connector box
earthing etc. complete complying with appropriate
specification / standards and as directed by SIPCOT Officers
etc. complete.
1 Rm
(One
Running
metre)
14 1000RM
(One
thousand
running
metres only)
Supply and laying of 3 Core x 2.5 sq.mm copper flexible cable
etc. complete complying with appropriate specification /
standards and as directed by SIPCOT Officers etc. complete.
1 Rm
(One
Running
metre)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
15 79Nos
(Seventy
nine
numbers
only)
Supply and painting with aluminium paint on the street light
pole etc. complete complying with appropriate specification /
standards and as directed by SIPCOT Officers etc. complete.
1No
(Each)
16 3 Nos
(Three
numbers
only)
Removing of existing pillar box and service connecion box
including cable and end termination etc. complete complying
with appropriate specification / standards and as directed by
SIPCOT Officers etc. complete.
1No
(Each)
17 3 Nos
(Three
numbers
only)
Supply and erection of outdoor type stand mounted street
light feeder pillar manual and auto ON/OFF with suitable TPN
40 Amps,MCB 4 pole timer switch, TPN contactor for the
automatic switching of street light fittings all component used
L&T make panel manufactured with CRP 14 gauge sheet with
powder coating. Incomer:63 A TPN MCB Outgoing:63 A TPN
CONTACTOR Control Circuit:Single digital time switch with 6A
control MCB Floor Mounting
1No
(Each)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
18 67 Nos
(Sixty seven
numbers
only)
Supply, deliveryand erection of 10m height Hot Dip Galvanized
Octogonal single collar Poleswith 150mm bottom A/F & 70mm
top A/F madeup of 3mm thick HT sheet along with base plate
of size 240 x 240 x 16mm along with 1000mm long
Double/Single arm bracket made up of 40NB GI pipe ,
Backelite sheet connectors for fixing of street light fittings
including 4nos of M20mm dia Ms J bolts of size 750mm long
top-En8 grade foundation bolts along with Template for the
above poles & Terminals suitable for the same etc complete
and as directed by SIPCOT Officers.
1No
(Each)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
19 67 Nos
(Sixty seven
numbers
only)
Supply, installation, testing and commissioning of90wLED
street lights(make like Heavells,crompton,Bajaj,Philips or
equivalent) consisting of separate optical and control gear,
having IP 65 or better rating, enclosure made of pressure die
casting aluminum having toughened glass, Input voltage
range of 90 to 270 V AC and Input frequency range of 47 to
63 HZ, PF > 0.9 (lag), external surge protection up to 10 K.V.
It shall have CRI > 70 and color temperature range between
3000 - 6000 deg K.LED chips shall be high power 2 W CREE/
NICHIA OR equivalent having efficiency of not less than 100
lumens / watt and junction temp. not exceeding 85 Deg
celsius with life of 50000 hours having warranty not less than
5 years. LEDs should be arranged in combination of series
and parallel connections: power electronic circuits shall have
protection for short circuit , over voltage, over current and
over temperature. Thickness of the fixtures not to exceed
70mm, weight shall not exceed 8 kg etc., the fixtures shall be
conforming to Indian standards or International standards CE
/ UL etc., and all materials used in manufacture shall be RoHS
compliant etc., complete Including dismantling of Existing
fittings and as directed by SIPCOT Officers.
1No
(Each)
20 Providing foundation arrangements to the street light poles as
per following specifications
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
a 90Cum
(Nin ety
cubic metre
only)
Earth work excavation for foundation in all classes of soils
such as sand silt or other loose soil,hard stiff clay, stiff black
cotton soil, hard red earth, shales, murram, gravel, stoney
earth and earth mixed with small size boulders etc. except
hard rock requiring blasting as per SS 20-B (HGS SS.20.B.)
and depositing the same to the low lying area /median, foot
path portion(only good earth to be deposited in median and
foot path portion for the required quantity) as directed by
Engineer in charge with initial lead of 10m and lift of 2m etc.
complete as per standard specification and as directed by the
SIPCOT officers.
1 Cum
(one cubic
metre)
b 4Cum
(Four cubic
metre only)
Providing plain Cement Concrete 1:4:8 (One cement, Four
sand and Eight aggregate) using 40mm size Hard broken
granite stone jelly for foundation, flooring bed, dummy
columns, mudmat below column footings, Grade beams etc.
laid in layers not exceeding 15cm thick including cost and
conveyance of all materials and labour to work site, mixing of
concrete, laying, compacting, curing with all leads for soft
potable water, hire and fuel charges for all tools and plants
including all other incidental charges such as bailing out water
for forming protective bunds, coffer dams and shoring,
strutting etc. complete complying with standard specifications
and as directed by "SIPCOT" officers. (in all heights and all
depths)
1 Cum
(one cubic
metre)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
c 45Cum
(Fouty five
cubic metre
only)
Providing Reinforced Cement Concrete 1:1 1/2:3 (One
cement, One and a half sand and three jelly) using Machine
crushed 20mm size Hard Broken granite ISS stone Jelly for all
"REINFORCED CEMENT CONCRETE WORKS" including cost
and conveyance of all materials and labour to work site
excluding cost of centering, shuttering, strutting and cost of
MS / RTS Reinforcement grills placed in position but including
machine mixing of concrete, laying, vibrating with mechanical
vibrators, finishing, curing, including cost of soft potable water
treatment of bearing [(i.e.) Junction of walls / beams and
slabs] smooth with cement mortar 1:3 (One cement and
Three sand) and kraft paper laid over it without claim for extra
and and all labour charges for mixing concrete, laying, curing,
vibrating charges, hire charges for all tools and plants and all
other incidental charges etc. complete complying with
standard specifications and as directed by "SIPCOT" officers.
1 Cum
(one cubic
metre)
d 300Sqm
(Three
hundred
square
meter only)
Supplying and erecting steel centering for sides and soffits
including supports and strutting for all concrete works in all
floors using mild steel BG 10 sheets of size 90 cm x 60 cm
stiffened with welded mild steel angles of size 25mm x 25mm
x 3mm for boarding laid over silver oak (country wood) joists
of size 10cm x 6.5cm spaced at about 90cm centre to centre
and supported by casurina props of 10 cm to 13cm dia spaced
at 75cm centre to centre etc., Complete complying with
standard specification and as directed by SIPCOT Officers. (For
vertical surfaces)
1 Sqm
(one
square
metre)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
e 25Qtl
(Twenty five
Quintal only)
Supplying, Fabricating and placing in position steel
reinforcement grills using M.S. / R.T.S. rods of all sizes of
reinforcement for all Reinforced cement concrete works
including cost and conveyance of steel, binding wire,spacer
bars, cover blocks, labour charges for unbending of rods,
straighteing, cutting, fabricating, tying, lifting, placing in
position, overlaping to the required length whereever
necessary cover blocks and all other incidental charges etc.
complete complying with standard specifications and as
directed by "SIPCOT" officers. (The steel rods must be Fe 415
grade of any brand with ISI marking and necessary test
certicate to be produced before using it at site)
1 Qtl
(One
Quintal)
21 3 Nos
(Three
numbers
only)
1 No
(One
Number)
Fabrication, supply and installation of Outdoor street lighting
service pillar box of size 900 mm x 900 mm x 300 mm made
out of 16 SWG MS sheet steel fixed with required size of
wooden plange board , with 1 No. 100 A main switch 3nos of
100A fuse unitsuitable copper bus bars for neutral line
etc.complete.The pillar box fabricated with front double door
arrangements with locking facility painted with one coat of
primer and two coats of Aluminium finish.The pillar to be
installed in angle iron frame pedestal with concrete grouting
etc. complete including cost and conveyance of all materials
and labour including pedestal concrete and angle iron frame
pedestal etc. complete and as directed by SIPCOT Officials.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
22 3Nos
(Three
numbers
only)
Fabrication, Supply, installation of outdoor TNEB service
connection pillar box of size 1250mm X 900mm X 300mm
made out of 16 SWG sheet steel metal with locable door
incorporated with 1 No. 100 amps TPN rewireable fuse switch
and 32 Amps 4 way fuse DB with 12 Nos. 63A porcelain fuse
cutout only with 1 No. copper earth link and neutral link and 1
No. of 63 Amps contactor with 230 volt coil and 1 No. 24
hours timer of L & T make or equivalent with its control wiring,
power interconnection with 7/16 copper wire from main switch
to contactor and contactor to fuse DB etc. completed. The
pillar painted with one coat of red oxide and 2 coats of
aluminium finish as required by TNEB etc. The pillar to be
installed in angle iron frame pedestal with concrete grouting
etc. complete and as directed by SIPCOT Officers.
1No
(Each)
23 Supplying,laying and jointing of the following size of PVC
armoured LTUG cable with ISI mark in a trench to be
excavated at adepth of 0.75m and laying the cable into the
trunch and refilling the earth to make good etc. including cost
and conveyance of all materials and labour including pedestal
concrete and angle iron frame pedestal etc. complete and as
directed by SIPCOT Officials.(Excluding the cost of HDPE pipes
and laying the same into trenches will be extra)
a 150RM
(One
hundred and
fifty running
metre only)
3.5core x50sq.mm PVC .Armoured LTUG Aluminium cable 1 Rm
(One
Running
metre)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
b 4650RM
(Four
thousand
six
hundredand
fifty
running
metre only)
4core x16sq.mm PVC .Armoured LTUG Aluminium cable 1 Rm
(One
Running
metre)
24 700RM
(Seven
hundred
running
metre only)
Supply,laying, jointing and testing of 2 corex1.50 sq.mm PVC
insulated Sc unsheathed Cu.cable conductor cable of 1100V
grade with necessary jointing materials etc., complete
including cost and conveyance of cable and labou charges for
laying the cable etc. complete and as directed by SIPCOT
Officials.
1 Rm
(One
Running
metre)
25 3 Nos
(Three
numbers
only)
Earthing as per ISI specification with an earth elctrode of 2.10
m class "B" GI Pipe of dia not less than 40 mm with copper
earth plate of size 125 mm x 50 mm x 6 mm with necessary
funneling arrangements with necesssary masonry work and
with 38 mm RCC cover slab for the brick masonry etc
complete with appropriate specification / standards and as
directed by SIPCOT Officers.
1No (Each)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
26 67Nos
(Sixty seven
numbers
only)
Coil earth to street light poles with 8 SWG GI wire of 11.50mts
cof length in which 10mts of total length compressed in to a
coil of one metre length connected suitable with hexagonal
earth bolt of size 8mmx25mm welded on the pole at one end
with a coil position fixed on the earth etc. complete complying
with appropriate specification / standards and as directed by
SIPCOT Officers etc. complete.
1No
(Each)
27 530RM
(Five
hundred and
thirty
running
metre only)
Supply,delivery and laying of 90mm dia. HDPE pipes including
cost and laying charges into trenches etc. complete complying
with appropriate specification / standards and as directed by
SIPCOT Officers etc. complete.
1 Rm
(One
Running
metre)
28 134RM
(One
hundred and
thirty four
running
metre only)
Supply,delivery and laying of 50mm dia. HDPE pipes including
cost and laying charges into pole pillars for connecting cable
into poles etc. complete complying with appropriate
specification / standards and as directed by SIPCOT Officers
etc. complete.
1 Rm
(One
Running
metre)
28 items (Twenty eight items only) Sub Total
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
Sl.
No.
Quantity
TNBP
No.
Rate Both in figures
and in words (Rs.)Unit
Amount
(In Rupees)
1
a 3 Nos
(Three
numbers
only)
1No
(Each)
Description of Work
Supply, deliveryand erection of 10m height consisting of
139.70mmODx4.50mm thickx5200mm length,
114.30mmODx4.50mm thickx2400mm length,
88.90mmODx3.25mm thickx2400mm length, GI Steel tubular
pole with base plate (300x300x6mm) 8.20m above ground
level including earth work excavation , providing cement
concrete 1:2:4(0,45x0.45x0.45m),SMC box and painting two
coats of aluminium paint including one coat red oxide primer
etc., with required bolts& Nuts suitable for street light fittings
etc complete and as directed by SIPCOT Officers.
For Double collar pole
SECTION-B
Name of Work:Upgradation of Street Light system Viz.Replacing S.V.lamps with LED street light fittings, Replacing damaged street light
poles, Replacing damaged cables and painting of poles at DTA in SIPCOT Industrial Growth centre, Perundurai
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
b 106Nos
(One
hundred and
six numbers
only)
1No
(Each)
2
a 300 Nos
(Three
hundred
numbers
only)
1No
(Each)
For single collar pole
Replacement of S.V.lamp street light fittings with90W&120W
street lights (Philips/Havels or equivalant make) bhaving
pressure diecast aluminium IP 66 roadway luminaire with our
eye power LED as light source with toughened glass, input
volltage frequency range of 50HZ,PF 0.95 with 100 lumens
/watt having a long life of 50000 burning hours with awarranty
of 3 years from the date of supply / over voltage protection &
with 5KV surge protection having THD of 10% and as per IEC
safety standards etc complete and as directed by SIPCOT
Officers.
For Double collar pole-120W street light fittings
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
b 1067Nos
(Onethousan
d sixty seven
numbers
only)
1No
(Each)
3 2750 RM .
(Two
thousand
seven
hundred and
fiftyrunning
metre only)
1 Rm
(One
Running
metre)
4 14500 RM .
(Fourteen
thousand
five hundred
running
metre only)
1 Rm
(One
Running
metre)
5 20000 RM .
(Twenty
thousand
running
metre only)
1 Rm
(One
Running
metre)
For Single collar pole-90W street light fittings
Supply and laying of 3 1/2 95 sq.mm PVC armoured LTUG
cable with ISI mark n a trench to be excavated at a depth of
1.00 metre putting 0.30 mt. Layer of sand and covering the
cable completely with bricks and sand and refilling the earth to
make good etc complete and as directed by SIPCOT Officers.
Supply and laying of4x16 sq.mm PVC armoured LTUG cable
with ISI mark in a trench to be excavated at a depth of 0.75
metre putting 0.15 mt. Layer of sand and covering the cable
completely with bricks and sand and refilling the earth to
make good etc complete and as directed by SIPCOT Officers.
Supply and laying and testing of 3 corex 1.50 sq.mm PVC
Insulated SC unsheathed Cu.cable conductor of 110V grade
with necessary jointing materials etc., complete including cost
and conveyance of cable and labour charges for laying the
cable completely with bricks and sand and refilling the earth to
make good etc complete and as directed by SIPCOT Officers.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
6 5650 Sqm
(Five
thousand
six hundred
fifty squre
meter only)
Painting two coats with aluminium paint over one coat of red
oxide primer including cost of paint, labour and other
materials like brushes, putty and scaffolding charges etc.,
complete complying with standard specification and as
directed by the departmental officers.
1 Sqm
(one
square
metre)
6 items (Six items only) SubTotal
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
Sl.
No.
Quantity
TNBP
No.
Rate Both in figures
and in words (Rs.)Unit
Amount
(In Rupees)
1 20 Nos
(Twenty
numbers
only)
1No
(Each)
2 4Nos
(Four
numbers
only)
Supply of 12.5mtr. high mast for wind velocity160Kmph
having individual length of 6.50m,3mm thick 300mm dia
bottom and top150mm dia having galvanizing thickness of
average 70micron for bottom and top sections with
accessories like motor, double drum winch of gear ratio 50:1,
trailing cabe 5 core 2.5sqmm, 6mm SS wire rope, head frame
lantern ring, lighting finial suitable for 6 nos 300W flood
lighting but without flood light rate etc. complete complying
with appropriate specification / standards and as directed by
SIPCOT Officers etc. complete.
1No
(Each)
Description of Work
Supply, deliveryand erection of 9m height Hot Dip Galvanized
Octogonal single collar Poleswith 150mm bottom A/FV 70mm
top A/Fmadeup of 3mm thick HT sheet along with base plate
of size 204x204x16mm along with 1000mm long Single arm
bracket made up of 40NB GI pipe , Backelite sheet connectors
for fixing of street light fittings including 4nos of M20mm dia
Ms J bolts of size 750mm long top-En8 grade foundation bolts
along with Template for the above poles & Terminals suitable
for the same etc complete and as directed by SIPCOT
Officers.(as per drawing enclosed)
SECTION-C
Name of Work:Replacing the existing Sodium vapour street Light fittings with LED fittings,Jungle clearance,Desilting of existing drains,and
repainting of kerb walls at SIPCOT I.T.Park Siruseri
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
3
a 20Nos
(Twenty
numbers
only)
1No
(Each)
Supply, installation, testing and commissioning of following
capacity of LED street lights(make like
Heavells,crompton,Bajaj,Philips or equivalent) consisting of
separate optical and control gear, having IP 65 or better
rating, enclosure made of pressure die casting aluminum
having toughned glass, Input voltage range of 90 to 270 V AC
and Input frequency range of 47 to 63 HZ, PF > 0.9 (lag),
external surge protection up to 10 K.V. It shall have CRI > 70
and color temperature range between 3000 - 6000 deg K.LED
chips shall be high power 1 W CREE/ NICHIA OR equivalent
having efficiency of not less than 100 lumens / watt and
junction temp. not exceeding 85 Deg celsius with life of 50000
hours having warranty not less than 5 years. LEDs should be
arranged in combination of series and parallel connections:
power electronic circuits shall have protection for short circuit
, over voltage, over current and over temperature. Thickness
of the fixtures not to exceed 70mm, weight shall not exceed 8
kg etc., the fixtures shall be conforming to Indian standards or
International standards CE / UL etc., and all materials used in
manufacture shall be RoHS compliant etc., complete Including
dismantling of Existing fittings and as directed by SIPCOT
Officers.
120W LED fittings
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
b 24Nos
(Twenty four
numbers
only)
1No
(Each)
4
a 38Cum
(Thirty eight
cubic metre
only)
1 Cum
(one cubic
metre)
200W LED Flood light fittings
Providing foundation arrangements to the street light poles as
per following specifications
Earth work excavation for foundation in all classes of soils
such as sand, silt or other loose soil,hard stiff clay, stiff black
cotton soil, hard red earth, shales, murram, gravel, stoney
earth and earth mixed with small size boulders etc. except
hard rock requiring blasting as per SS 20-B (HGS SS.20.B.)
and depositing the same to the low lying area /median, foot
path portion(only good earth to be deposited in median and
foot path portion for the required quantity) as directed by
Engineer in charge with initial lead of 10m and lift of 2m etc.
complete as per standard specification and as directed by the
SIPCOT officers.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
b 2Cum
(Two cubic
metre only)
1 Cum
(one cubic
metre)
Providing plain Cement Concrete 1:4:8 (One cement, Four
sand and Eight aggregate) using 40mm size Hard broken
granite stone jelly for foundation, flooring bed, dummy
columns, mudmat below column footings, Grade beams etc.
laid in layers not exceeding 15cm thick including cost and
conveyance of all materials and labour to work site, mixing of
concrete, laying, compacting, curing with all leads for soft
potable water, hire and fuel charges for all tools and plants
including all other incidental charges such as bailing out water
for forming protective bunds, coffer dams and shoring,
strutting etc. complete complying with standard specifications
and as directed by "SIPCOT" officers. (in all heights and all
depths)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
c 18Cum
(Eighteen
cubic metre
only)
1 Cum
(one cubic
metre)
Providing Reinforced Cement Concrete 1:1 1/2:3 (One
cement, One and a half sand and three jelly) using Machine
crushed 20mm size Hard Broken granite ISS stone Jelly for all
"REINFORCED CEMENT CONCRETE WORKS" including cost
and conveyance of all materials and labour to work site
excluding cost of centering, shuttering, strutting and cost of
MS / RTS Reinforcement grills placed in position but including
machine mixing of concrete, laying, vibrating with mechanical
vibrators, finishing, curing, including cost of soft potable water
treatment of bearing [(i.e.) Junction of walls / beams and
slabs] smooth with cement mortar 1:3 (One cement and
Three sand) and kraft paper laid over it without claim for extra
and and all labour charges for mixing concrete, laying, curing,
vibrating charges, hire charges for all tools and plants and all
other incidental charges etc. and providing weap holes at 1m
interval including cost of PVC pipes if required as directed by
SIPCOT officers etc. complete complying with standard
specifications and as directed by "SIPCOT" officers.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
d 110Sqm
(One
hundred and
ten square
meter only)
1 Sqm
(one
square
metre)
e 9Qtl
(Nine
Quintal only)
1 Qtl
(One
Quintal)
Supplying and erecting steel centering for sides and soffits
including supports and strutting for all concrete works in all
floors using mild steel BG 10 sheets of size 90 cm x 60 cm
stiffened with welded mild steel angles of size 25mm x 25mm
x 3mm for boarding laid over silver oak (country wood) joists
of size 10cm x 6.5cm spaced at about 90cm centre to centre
and supported by casurina props of 10 cm to 13cm dia spaced
at 75cm centre to centre etc., Complete complying with
standard specification and as directed by SIPCOT Officers. For
vertical surfaces such as RCC facia, fins, drops etc.,
Supplying, Fabricating and placing in position steel
reinforcement grills using M.S. / R.T.S. rods of all sizes of
reinforcement for all Reinforced cement concrete works
including cost and conveyance of steel, binding wire,spacer
bars, cover blocks, labour charges for unbending of rods,
straighteing, cutting, fabricating, tying, lifting, placing in
position, overlaping to the required length whereever
necessary cover blocks and all other incidental charges etc.
complete complying with standard specifications and as
directed by "SIPCOT" officers. (The steel rods must be Fe 415
grade of any brand with ISI marking and necessary test
certicate to be produced before using it at site)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
5 4Nos
(Four
numbers
only)
Supply of foundation bolts manufactured from special steel
along with nuts, washers,anchor plate and common template
etc., Complete complying with standard specification and as
directed by SIPCOT Officers.
1No
(Each)
6 4Nos
(Four
numbers
only)
Installation of high mast feeder pillar by grouting the sand in
concrete etc., Complete complying with standard specification
and as directed by SIPCOT Officers.
1No
(Each)
7 4Nos
(Four
numbers
only)
Erection of High mast with the help of suitable tools and
plants, wiring of luminaires with alll wiring materials like PVC
insulated PVC sheathed flexible cable of suitable copper
conductor cores of 1.5sq.mm, lugs and labour etc., Complete
complying with standard specification and as directed by
SIPCOT Officers.
1No
(Each)
8 4Nos
(Four
numbers
only)
Supply of twin dome aviation obstruction lights with 2nos of
100W GLS lamps of approved make etc., Complete complying
with standard specification and as directed by SIPCOT
Officers.
1No
(Each)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
9 5 Nos
(Five
numbers
only)
1 No
(One
Number)
Fabrication, supply and installation of TNEB service connection
distribution pillar box outdoor type of size 900 mm x 900 mm
x 300 mm made out of 16 SWG MS sheet steel with lockable
door, with 1 No. 100 A main switch 3nos of 100A fuse
unitsuitable copper bus bars for neutral line etc.complete.The
pillar box fabricated with front double door arrangements with
locking facility painted with one coat of primer and two coats
of Aluminium finish.The pillar to be installed in angle iron
frame pedestal with concrete grouting etc. including cost and
conveyance of all materials and labour including pedestal
concrete and angle iron frame pedestal etc. complete and as
directed by SIPCOT Officials.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
10 5 Nos
(Five
numbers
only)
1 No
(One
Number)
11 Supply,laying and jointing of following size of PVC armoured
LTUG aluminium cable with ISI mark in a trench to be
excated at a depth of 0.75m and routing the cable into the
90mm dia HDPE pipes laid completely and refilling the earth to
make good etc. complete and as directed by SIPCOT Officials.
Fabrication, supply and installation of TNEB service connection
distribution pillar box outdoor type of size 1250mm x 900 mm
x 300 mm made out of 16 SWG MS sheet steel with lockable
door, with 1 No. 100 A TPN rewirable fuse switch and 32 A 4
way fuse DB with 12 Nos. 63A porcelain fuse cut-outs with
1No. copper earth link and neutral link and 1 No. of 63 A TP
Contactor with 230 V Coil and 1 No. of 24 Hours Timer of L &
T make or equivalent with its contorl wiring, power
interconnection with 7/16 copper wire from main switch to
contactor and contactor to fuse DB etc., complete. The pillar
painted with one coat of red-oxide and 2 coats of aluminium
finish as required by TNEB etc., The pillar to be installed in
angle iron frame pedestal with concrete grouting etc.
including cost and conveyance of all materials and labour
including pedestal concrete and angle iron frame pedestal etc.
complete and as directed by SIPCOT Officials.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
a 500RM
( Five
hundred and
fifty running
metre only)
3 1/2 Core x70Sq.mm PVC armoured LTUG aluminium cable 1 Rm
(One
Running
metre)
b 2000RM
(Twothousan
d running
metre only)
4Core x 16Sq.mm PVC armoured LTUG aluminium cable 1 Rm
(One
Running
metre)
12 5 Nos
(Five
numbers
only)
Earthing as per ISI specification with an earth elctrode of 2.10
m class "B" GI Pipe of dia not less than 40 mm with copper
earth plate of size 125 mm x 50 mm x 6 mm with necessary
funneling arrangements with necesssary masonry work and
with 38 mm RCC cover slab for the brick masonry with
appropriate specification / standards and as directed by
SIPCOT Officers.
1No (Each)
13 4Nos
(Four
numbers
only)
Coil earth to street light poles with 8SWG Gi wire of 11.50mts
cof length in which 10mts of total length compressed in to a
coil of one metre length connected suitable with hexagonal
earth bolt of size 8mmx25mm welded on the pole at one end
with a coil position frixed on the earth etc. complete
complying with appropriate specification / standards and as
directed by SIPCOT Officers etc. complete.
1No
(Each)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
14 2000RM
(Two
thousand
running
metre only)
Supply,delivery and laying of 90mm dia. HDPE pipes including
cost and laying charges into trenches etc. complete complying
with appropriate specification / standards and as directed by
SIPCOT Officers etc. complete.
1 Rm
(One
Running
metre)
15 24RM
(Twenty
four running
metre only)
Supply,delivery and laying of 50mm dia. HDPE pipes including
cost and laying charges into pole pillars for connecting cable
into polesa etc. complete complying with appropriate
specification / standards and as directed by SIPCOT Officers
etc. complete.
1 Rm
(One
Running
metre)
16
a 6Nos
(Six
numbers
only)
1No
(Each)
Supply, deliveryand erection of 9m height Hot Dip Galvanized
Octogonal Poleswith 140mm bottom A/F & 70mm top A/F
madeup of 3mm thick HT sheet along with base plate of size
300x300x16mm along with 1000mm long Double/Single arm
bracket made up of 40NB GI pipe , Backelite sheet connectors
for fixing of styreet light fittings including 4nos of M20mm dia
Ms J bolts of size 750mm long top-En8 grade foundation bolts
along with Template for the above poles & Terminals suitable
for the same etc complete and as directed by SIPCOT
Officers.(as per drawing enclosed)
For Twin Collor poles
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
b 4Nos
(Four
numbers
only)
1No
(Each)
17
a 14Cum
(Fourteen
cubic metre
only)
1 Cum
(one cubic
metre)
Providing foundation arrangements to the street light poles as
per following specifications
Earth work excavation for foundation in all classes of soils
such as sand, silt or other loose soil, hard stiff clay, stiff black
cotton soil, hard red earth, shales, murram, gravel, stoney
earth and earth mixed with small size boulders etc. except
hard rock requiring blasting as per SS 20-B (HGS SS.20.B.)
and depositing the same to the low lying area /median, foot
path portion(only good earth to be deposited in median and
foot path portion for the required quantity) as directed by
Engineer in charge with initial lead of 10m and lift of 2m etc.
complete as per standard specification and as directed by the
SIPCOT officers.
For Single Collor poles
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
b 1Cum
(One cubic
metre only)
1 Cum
(one cubic
metre)
Providing plain Cement Concrete 1:4:8 (One cement, Four
sand and Eight aggregate) using 40mm size Hard broken
granite stone jelly for foundation, flooring bed, dummy
columns, mudmat below column footings, Grade beams etc.
laid in layers not exceeding 15cm thick including cost and
conveyance of all materials and labour to work site, mixing of
concrete, laying, compacting, curing with all leads for soft
potable water, hire and fuel charges for all tools and plants
including all other incidental charges such as bailing out water
for forming protective bunds, coffer dams and shoring,
strutting etc. complete complying with standard specifications
and as directed by "SIPCOT" officers. (in all heights and all
depths)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
c 7Cum
(Seven
cubic metre
only)
1 Cum
(one cubic
metre)
Providing Reinforced Cement Concrete 1:1 1/2:3 (One
cement, One and a half sand and three jelly) using Machine
crushed 20mm size Hard Broken granite ISS stone Jelly for all
"REINFORCED CEMENT CONCRETE WORKS" including cost
and conveyance of all materials and labour to work site
excluding cost of centering, shuttering, strutting and cost of
MS / RTS Reinforcement grills placed in position but including
machine mixing of concrete, laying, vibrating with mechanical
vibrators, finishing, curing, including cost of soft potable water
treatment of bearing [(i.e.) Junction of walls / beams and
slabs] smooth with cement mortar 1:3 (One cement and
Three sand) and kraft paper laid over it without claim for extra
and and all labour charges for mixing concrete, laying, curing,
vibrating charges, hire charges for all tools and plants and all
other incidental charges etc. and providing weap holes at 1m
interval including cost of PVC pipes if required as directed by
SIPCOT officers etc. complete complying with standard
specifications and as directed by "SIPCOT" officers.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
d 45Sqm
(Forty five
square
meter only)
1 Sqm
(one
square
metre)
e 4Qtl
(Four
Quintal only)
1 Qtl
(One
Quintal)
Supplying and erecting steel centering for sides and soffits
including supports and strutting for all concrete works in all
floors using mild steel BG 10 sheets of size 90 cm x 60 cm
stiffened with welded mild steel angles of size 25mm x 25mm
x 3mm for boarding laid over silver oak (country wood) joists
of size 10cm x 6.5cm spaced at about 90cm centre to centre
and supported by casurina props of 10 cm to 13cm dia spaced
at 75cm centre to centre etc., Complete complying with
standard specification and as directed by SIPCOT Officers. For
vertical surfaces such as RCC facia, fins, drops etc.,
Supplying, Fabricating and placing in position steel
reinforcement grills using M.S. / R.T.S. rods of all sizes of
reinforcement for all Reinforced cement concrete works
including cost and conveyance of steel, binding wire,spacer
bars, cover blocks, labour charges for unbending of rods,
straighteing, cutting, fabricating, tying, lifting, placing in
position, overlaping to the required length whereever
necessary cover blocks and all other incidental charges etc.
complete complying with standard specifications and as
directed by "SIPCOT" officers. (The steel rods must be Fe 415
grade of any brand with ISI marking and necessary test
certicate to be produced before using it at site)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
18 334Nos
(Three
hundred and
thirty four
numbers
only)
Supply,installation,testing and commissioning of 120 watts of
LED fitting with inbuilt tilt angle arrangement,IP66 protection
toughened glass diffuser presure die cast housing with potted
driver type ,driver inbuilt 4KVA surge of efficiency >85%
,external surge 4KVA within lumainaires of efficiency >100
lumens/watt PF=0.95,THD<10%,frequency 50HZ and
thickness of fixture not exceed 70mm & weight <8kg etc.
complete complying with appropriate specification / standards
and as directed by SIPCOT Officers etc. complete.
1No
(Each)
19 60Nos
(Sixty
numbers
only)
Supply,installation,testing and commissioning of 200 watts of
LED flood light fitting Aesthethetically designed roadway
luminaiare with excellent thermal management,poly carbonate
diffuser,IP66 protection,pressure die casthousing with potted
driver type, driver in built 4Kva surge, external surge5Kva
within the luminaires efficiency >100 lumens/watt and
thickness of fixture not exceed 70mm & weight <8kg etc.
complete complying with appropriate specification / standards
and as directed by SIPCOT Officers
1No
(Each)
20 Supply,laying and jointing of following size of PVC armoured
LTUG aluminium cable with ISI mark in a trench to be
excated at a depth of 0.75m,putting 0.3m layer of sand and
refilling with earth to make good etc. complete and as
directed by SIPCOT Officials.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
a 15000RM
(Fifteen
thousand
running
metre only)
4Core x 16Sq.mm PVC armoured LTUG aluminium cable 1 Rm
(One
Running
metre)
b 2000RM
(Twothousan
d running
metre only)
3 1/2 Core x70Sq.mm PVC armoured LTUG aluminium cable 1 Rm
(One
Running
metre)
21 298Nos
(Two
hundred and
ninety eight
numbers
only)
Painting two coats with aluminium paint and numbering the
poles with white paint including cost of paint, labour and
other materials like brushes, putty and scaffolding charges
etc., complete complying with standard specification and as
directed by the departmental officers.
1No
(Each)
22 70500sq.m
(Seventy
thousand
five hundred
square
metres only)
Clearing Juliflira jungle with uprooting in 6the sides of berms
etc. complete and as directed by SIPCOT Officials.
1Sq.m
(One
square
metre)
Name of Work:Jungle clearance and uprooting Juliflora Jungle in the main roads and secondary roads and OSR and desilting of RCC & precast
drains at SIPCOT I.T.Park Siruseri
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
23 40Hours
(Forty hours
only)
Deploying machinery for clearing uprooted jungle etc.
complete and as directed by SIPCOT Officials.
1Hr
(One
hour)
24 7050Cum
(Seven
thousand
fifty square
metres only)
Disposal of cleared Juliflora jungle from site to a distance of
10KM lead including loading, unloading and conveying the
same etc. complete and as directed by SIPCOT Officials.
1Cum
(One cubic
metre)
25 7500Cum
(Seven
thousand
five hundred
cubic metres
only)
Earthwork by deploying earth movcing machinery for
mdesilting channel and forming bund on either side and
depositing the earth on banks etc. complete and as directed
by SIPCOT Officials.
1Cum
(One cubic
metre)
Name of Work:Desilting of Drains inSIPCOT I.T.Park Siruseri
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
26 7500Cum
(Seven
thousand
five hundred
square
metres only)
Disposal of desilted earth from site to a distance of 10KM lead
including loading, unloading and conveying the same etc.
complete and as directed by SIPCOT Officials.
1Cum
(One cubic
metre)
27 9600 Sqm
(Nine
thousand
six
hundredsqur
e meter
only)
Painting two coats of black and white bands alternatively each
coat separately using black and white paintsincluding cost of
paint, labour and other materials like brushes, etc., complete
complying with standard specification and as directed by the
departmental officers.
1Sq.m
(One
square
metre)
27 items (Twenty seven items only) SubTotal
Name of Work:Repainting of Kerb walls,centre median,speed breakers with black and white paint and in main roads and secondary roads at
SIPCOT I.T.Park Siruseri
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
Sl.
No.
Quantity
TNBP
No.
Rate Both in figures
and in words (Rs.)Unit
Amount
(In Rupees)
1 128000 Sqm
(One lakh
twenty eight
thousand
squre meter
only)
Clearing light jungle etc. complete and as directed by SIPCOT
Officials.
1Sq.m
(One
square
metre)
2 38500Cum
(Thirty eight
thousand
five hundred
cubic metres
only)
Desilting of side drain and removal of debris/waste earth
dumped along the road sides and conveying the same with a
lead of 2Km including cost and conveyance of all charges etc.
complete and as directed by SIPCOT Officials.
1Cum
(One cubic
metre)
2 items (Two items only) Sub Total
Section-D
Name of work;Clearing light Jungles and Desilting of side drain and waste earth available in side berms at SIPCOT Indusatrial
Complex,Gummidipoondi
Description of Work
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
Sl.
No.
Quantity
TNBP
No.
Rate Both in figures
and in words (Rs.)Unit
Amount
(In Rupees)
1
a 20Nos
(Twenty
numbers
only)
1No
(Each)
For Single Collor poles
SECTION-E
Name of work;Replacement of 250W SV Lamp fittings with 120W LED Street Light fittings and providing Highmast Lights for the Street Light
system,Clearing the light jungle and Desilting RCC Drain in PhaseI & II at SIPCOT Industrial Complex, Ranipet
Description of Work
Supply, deliveryand erection of 10m height Hot Dip Galvanized
Octogonal Poleswith 150mm bottom A/F & 70mm top
A/Fmadeup of 3mm thick HT sheet along with base plate of
size 240x240x16mm along with 1000mm long Double/Single
arm bracket made up of 40NB GI pipe , Backelite sheet
connectors for fixing of street light fittings including 4nos of
M20mm dia Ms J bolts of size 750mm long top-En8 grade
foundation bolts along with Template for the above poles &
Terminals suitable for the same etc complete and as directed
by SIPCOT Officers.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
2
a 187Nos
(One
hundred and
eighty seven
numbers
only)
1No
(Each)
3 1 Cum
(one cubic
metre)
Supply,Installation,testing and commissioning of LED street
lights 120W fitting (Philips/Havels or equivalant make) having
IP 66 rating made of versatile pressure die casting aluminium
having with toughened glass, input volltage frequency range
from 90V to 270V frequency 47 to 63 HZ,PF 0.95 & LED
make used shall be not less than and 100lm/Watt having a
long life of 50000 burning hours with a warranty of 5 years
from the date of supply and with over voltage protection &
with 10KV surge protection having THD of 10% and as per IEC
safety standards etc complete and as directed by SIPCOT
Officers.
For Twin Collor poles
Providing foundation arrangements to the street light poles as
per following specifications
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
a 3Cum
(Three
cubic metre
only)
1 Cum
(one cubic
metre)
b 1Cum
(One cubic
metre only)
1 Cum
(one cubic
metre)
Earth work excavation for foundation in all classes of soils
such as sand, silt or other loose soil, hard stiff clay, stiff black
cotton soil, hard red earth, shales, murram, gravel, stoney
earth and earth mixed with small size boulders etc. except
hard rock requiring blasting as per SS 20-B (HGS SS.20.B.)
and depositing the same to the low lying area /median, foot
path portion(only good earth to be deposited in median and
foot path portion for the required quantity) as directed by
Engineer in charge with initial lead of 10m and lift of 2m etc.
complete as per standard specification and as directed by the
SIPCOT officers.
Providing plain Cement Concrete 1:4:8 (One cement, Four
sand and Eight aggregate) using 40mm size Hard broken
granite stone jelly for foundation, flooring bed, dummy
columns, mudmat below column footings, Grade beams etc.
laid in layers not exceeding 15cm thick including cost and
conveyance of all materials and labour to work site, mixing of
concrete, laying, compacting, curing with all leads for soft
potable water, hire and fuel charges for all tools and plants
including all other incidental charges such as bailing out water
for forming protective bunds, coffer dams and shoring,
strutting etc. complete complying with standard specifications
and as directed by "SIPCOT" officers. (in all heights and all
depths)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
c 12 Cum
(Twelve
cubic metre
only)
1 Cum
(one cubic
metre)
Providing Reinforced Cement Concrete 1:1 1/2:3 (One
cement, One and a half sand and three jelly) using Machine
crushed 20mm size Hard Broken granite ISS stone Jelly for all
"REINFORCED CEMENT CONCRETE WORKS" including cost
and conveyance of all materials and labour to work site
excluding cost of centering, shuttering, strutting and cost of
MS / RTS Reinforcement grills placed in position but including
machine mixing of concrete, laying, vibrating with mechanical
vibrators, finishing, curing, including cost of soft potable water
treatment of bearing [(i.e.) Junction of walls / beams and
slabs] smooth with cement mortar 1:3 (One cement and
Three sand) and kraft paper laid over it without claim for extra
and and all labour charges for mixing concrete, laying, curing,
vibrating charges, hire charges for all tools and plants and all
other incidental charges etc. and providing weap holes at 1m
interval including cost of PVC pipes if required as directed by
SIPCOT officers etc. complete complying with standard
specifications and as directed by "SIPCOT" officers.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
d 75 Sqm
(Seventy five
square
meter only)
1 Sqm
(one
square
metre)
e 0.50Qtl
(Zero point
five zero
Quintal only)
1 Qtl
(One
Quintal)
Supplying and erecting steel centering for sides and soffits
including supports and strutting for all concrete works in all
floors using mild steel BG 10 sheets of size 90 cm x 60 cm
stiffened with welded mild steel angles of size 25mm x 25mm
x 3mm for boarding laid over silver oak (country wood) joists
of size 10cm x 6.5cm spaced at about 90cm centre to centre
and supported by casurina props of 10 cm to 13cm dia spaced
at 75cm centre to centre etc., Complete complying with
standard specification and as directed by SIPCOT Officers. For
vertical surfaces such as RCC facia, fins, drops etc.,
Supplying, Fabricating and placing in position steel
reinforcement grills using M.S. / R.T.S. rods of all sizes of
reinforcement for all Reinforced cement concrete works
including cost and conveyance of steel, binding wire,spacer
bars, cover blocks, labour charges for unbending of rods,
straighteing, cutting, fabricating, tying, lifting, placing in
position, overlaping to the required length whereever
necessary cover blocks and all other incidental charges etc.
complete complying with standard specifications and as
directed by "SIPCOT" officers. (The steel rods must be Fe 415
grade of any brand with ISI marking and necessary test
certicate to be produced before using it at site)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
4 10 Nos
(Ten
numbers
only)
1 No
(One
Number)
5 11Nos
(eleven
numbers
only)
1 No
(One
Number)
Fabrication, supply and installation of TNEB service connection
distribution pillar box outdoor type of size 900 mm x 900 mm
x 300 mm made out of 16 SWG MS sheet steel with lockable
door, with 1 No. 100 A maqin3nos of 100A fuse unitsuitable
copper bus bars for neutral line etc.complete.The pillar box
fabricated with front double door arrangements with locking
facility painted with one coat of primer and two coats of
Aluminium finish.The pillar to be installed in angle iron frame
pedestal with concrete grouting etc. including cost and
conveyance of all materials and labour including pedestal
concrete and angle iron frame pedestal etc. complete and as
directed by SIPCOT Officials.
Fabrication, Supply, installation of outdoor TNEB service
connection pillar box of 1250mm X 900mm X 300mm made
out of 16 SWG sheet steel matel incorporated with 1 No. 100
amps TPN rewireable fuse switch with 12 Nos. 63A porcelain
fuse cut only with 1 No. copper earth link and neutral link and
1 No. of 24 hours timer of L & T make with its control woring,
power interconnection with 7/16 copper wire from main switch
to contactor and contactor to fuse DB etc. completed. The
pillar painted with one coat of red oxide and 2 coats of
aluminium finish as required by TNEB etc. The pillar to be
installed in angle iron frame pedestal with concrete grouting
etc. complete and as directed by SIPCOT Officers.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
6
a 1500RM
(one
thousand
five hundred
running
metre only)
3 1/2 Core x 50Sq.mm PVC armoured LTUG aluminium
cable
1 Rm
(One
Running
metre)
b 13800RM
(Thirteen
thousand
eight
hundred
running
metre only)
4Core x 16Sq.mm PVC armoured LTUG aluminium cable 1 Rm
(One
Running
metre)
7 1700RM
(One
thousand
seven
hundred
running
metre only)
1 Rm
(One
Running
metre)
Supply,laying and jointing of following size of PVC armoured
LTUG aluminium cable with ISI mark in a trench to be
excated at a depth of 0.75m,putting 0.3m layer of sand and
refilling with earth to make good etc. complete and as
directed by SIPCOT Officials.
Supply, laying and testing of 2 core x 1.50 sq.mm PVC
insulated SC unsheathed Cu.cable conductor cable of 1100 V
grade with necessary jointing materials etc., complete
including cost and conveyance of cable and labour charges for
laying the cable etc. complete complying with appropriate
specification / standards and as directed by SIPCOT Officers
etc. complete.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
8 164Nos
(One
hundred
sixty four
numbers
only)
1No
(Each)
9 164Nos
(One
hundred
sixty four
numbers
only)
Supply and fixing of SMC four way street light pole box of size
225x180x110mm with 6mm hylem sheet, 10AMS connector
box in the pole suitable etc. complete complying with
appropriate specification / standards and as directed by
SIPCOT Officers etc. complete.
1No
(Each)
10 23Nos
(Twenty
three
numbers
only)
Supply of Double Arm bracket having length of 1500mm
suitable to fix 2Nos 120W LED street light fitting but without
fitting rate etc. complete complying with appropriate
specification / standards and as directed by SIPCOT Officers
etc. complete.
1No
(Each)
11 141Nos
(One
hundred and
forty one
numbers
only)
Supply of Single Arm bracket having length of 1000mm
suitable to fix 120W LED street light fitting but without fitting
rate etc. complete complying with appropriate specification /
standards and as directed by SIPCOT Officers etc. complete.
1No
(Each)
Earthing as per ISI specification with an earth elctrode of 2.10
m class "B" GI Pipe of dia not less than 40 mm with copper
earth plate of size 125 mm x 50 mm x 6 mm with necessary
funneling arrangements with necesssary masonry work and
with 38 mm RCC cover slab for the brick masonry with
appropriate specification / standards and as directed by
SIPCOT Officers.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
12 740 Sqm
(Seven
hundred
forty squre
meter only)
Painting two coats with aluminium paint over one coat of red
oxide primer including cost of paint, labour and other
materials like brushes, putty and scaffolding charges etc.,
complete complying with standard specification and as
directed by the departmental officers.
1 Sqm
(one
square
metre)
13 2Nos
(Two
numbers
only)
Supply of 12.5mtr. high mast for wind velocity160Kmph
having individual length of 6.50m,3mm thick bottom and
top150mm having galvanizing thickness of average 70micron
for bottom and top sec tions with accessories lioke motor,
double drum winch of gear ration 50:1, trailing cabe 5 core
2.5sqmm, 6mm SS wire rope, head frame lantern ring,
lighting finial suitable for 6 nos 300W flood lighting finial
suitable for 6nos 300W flood light but without flood light rate
etc. complete complying with appropriate specification /
standards and as directed by SIPCOT Officers etc. complete.
1No
(Each)
14 2Nos
(Two
numbers
only)
Supply of foundation bolts of M24 size having length 750 mm
6 Nos of bolt per mast made of TOR steel having galvanized
on the threaded portion of the bolt etc. complete complying
with appropriate specification / standards and as directed by
SIPCOT Officers etc. complete.
1No
(Each)
Name of work;Providing High Mast light at PhaseIII in SIPCOT Industrial Complex, Ranipet
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
15 12Nos
(Twelve
numbers
only)
Supply and delivery of 300 watts of LED flood light fitting
Aesthethetically designed roadway luminaiare with excellent
thermal management,poly carbonate diffuser,IP66
protection,pressure die casthousing with potted driver type,
driver in built 4Kva surge, external surge5Kva within the
luminaire cut as per ref:LSFO-300-CDL/60,BIS registration
number mentioned in the driver etc. complete complying with
appropriate specification / standards and as directed by
SIPCOT Officers etc. complete.
1No
(Each)
16 2Nos
(Two
numbers
only)
Supply of twin dome aviation obstruction lights with two nos.
of 100W GLS lamps of approved make and as directed by
SIPCOT officers.
1No
(Each)
17 2Nos
(Two
numbers
only)
Supply of outdoor stand mounted feeder pillar with 32A TPN
MCB incomer, single dial time switch, 45A TP contactor for the
automatic switching of luminaries, power tool control with
2nos. 9A contactor and raise lower push button, incoming
35sq.mm and out going 16 & 2.5sq.mm terminals etc.,
Complete and as directed by SIPCOT officers.
1No
(Each)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
18 2Nos
(Two
numbers
only)
Fabrication, supply, installation of outdoor service pillar box of
suitable size 900x900x300mm made by 16 SWG sheet steel
metal fitted with required size of wooden plank board, 1 No. of
100 Amps main switch, 3 Nos. of 100 A fuse unit, suitable
copper bus bars for neutral line etc., complete. The pillar box
fabricated with front double door arrangements with one coat
of primer and 2 coats of aluminium finish. The pillar to be
erected with suitable angle iron frame pedestal with concrete
grouting etc., complete and as directed by SIPCOT officers.
1No
(Each)
19 2Nos
(Two
numbers
only)
Fabrication, Supply, installation of outdoor TNEB service
connection pillar box of 1250mm X 900mm X 300mm made
out of 16 SWG sheet steel matel incorporated with 1 No. 100
amps TPN rewireable fuse switch with 12 Nos. 63A porcelain
fuse cut only with 1 No. copper earth link and neutral link and
1 No. of 24 hours timer of L & T make with its control woring,
power interconnection with 7/16 copper wire from main switch
to contactor and contactor to fuse DB etc. completed. The
pillar painted with one coat of red oxide and 2 coats of
aluminium finish as required by TNEB etc. The pillar to be
installed in angle iron frame pedestal with concrete grouting
etc. complete and as directed by SIPCOT Officers.
1No
(Each)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
20 2Nos
(Two
numbers
only)
Providing foundation pedestal for High mast light including
earth work excavation, PCC 1;4;8,vibrated reinforced cement
concrete 1;1 1/2:3, including reinforcement, formwork and
centering etc. complete and as directed by SIPCOT Officers.
1No
(Each)
21 2Nos
(Two
numbers
only)
Erection of High mast with the help of suitable tools and
plants, wiring of luminaires with all wiring materials like PVC
insulated PVC sheathed flexible cable of suitable copper
conductor cores of 1.5sq.mm, lugs and labour etc., Complete
complying with standard specification and as directed by
SIPCOT Officers.
1No
(Each)
22 4Nos
(Four
numbers
only)
providing GI pipe earthing -2nos per High mast with 2.50m
long 40mm dia GI pipe including connection to to high mast
earth terminal with 25x3mm GI flats with all material and
labour etc., Complete complying with standard specification
and as directed by SIPCOT Officers.
1No
(Each)
23 Supply,laying and jointing of following size of PVC armoured
LTUG aluminium cable with ISI mark in a trench to be
excated at a depth of 0.75m,putting 0.3m layer of sand and
refilling with earth to make good etc. complete and as
directed by SIPCOT Officials.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
a 200RM
(Two
hundred
running
metre only)
3 1/2 Core x 25Sq.mm PVC armoured LTUG aluminium
cable
1 Rm
(One
Running
metre)
24 4Nos
(Four
numbers
only)
Supply and fixing of cable end termination of 3 1/2 Core x 25
Sq.mm PVC LTUG Aluminium armoured cable with necessary
aluminium cable sockets by crimping with etc.,electrical
connection complete and as directed by SIPCOT Officials.
1No
(Each)
25 56200 Sqm
(fifty six
thousand
two hundred
squre meter
only)
Clearing light jungle etc. complete and as directed by SIPCOT
Officials.
1Sq.m
(One
square
metre)
Name of work: Clearing the light jungle in the road side berms and desilting the RCC drain in Phase I & II at SIPCOT Industrial
Complex ,Ranipet.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
26 2800Cum
(Two
thousand
eight
hundred
cubic metres
only)
Desilting of side drain and refilling in the low lying areas in
places as shown by SIPCOT officers etc. complete and as
directed by SIPCOT Officials.(Phase I&II area)
1Cum
(One cubic
metre)
27 80Hours
(Eighty
hours only)
Deploying machinery for clearing uprooted jungle and desilted
earth etc. complete and as directed by SIPCOT Officials.
1Hr
(One
hour)
28 8420Cum
(Eight
thousand
four hundred
and forty
square
metres only)
Disposal of cleared Juliflora jungle and desilted earth from
site to a distance of 5KM lead including loading and conveying
the same etc. complete and as directed by SIPCOT Officials.
1Cum
(One cubic
metre)
Name of work: I Painting the Median kerb wall in Phase I & II at SIPCOT Industrial Complex ,Ranipet.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
29 3400 Sqm
(Three
thousand
fcur
hundredsqur
e meter
only)
Painting two coats of black and white bands alternatively each
coat separately using black and white paintsincluding cost of
paint, labour and other materials like brushes, etc., complete
complying with standard specification and as directed by the
departmental officers.
1Sq.m
(One
square
metre)
30 36000 Sqm
(Thirty six
thousand
squre meter
only)
Clearing light jungle etc. complete and as directed by SIPCOT
Officials.(PhaseIII area)
1Sq.m
(One
square
metre)
31 2400Cum
(Two
thousand
four
hundred
cubic metres
only)
Desilting of side drain and refilling in the low lying areas in
places as shown by SIPCOT officers etc. complete and as
directed by SIPCOT Officials.
1Cum
(One cubic
metre)
Name of Work: Painting the Median Kerb Wall for the Roads in Phase - III at SIPCOT Industrial Complex, Ranipet.
Name of work: Clearing the light jungle in the road side berms and desilting the PCC drain in Phase III at SIPCOT Industrial
Complex ,Ranipet.
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
32 60Hours
(Sixty hours
only)
Deploying machinery for clearing uprooted jungle and desilted
earth etc. complete and as directed by SIPCOT Officials.
1Hr
(One
hour)
33 6000Cum
(Six
thousand
square
metres only)
Disposal of cleared Juliflora jungle and desilted earth from
site to a distance of 5KM lead including loading, unloading and
conveying the same etc. complete and as directed by SIPCOT
Officials.
1Cum
(One cubic
metre)
SubToatal33 items (Thirty three items only)
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE
Overall Total
GST 12% on Section E Sub Total
Section C Sub total
GST 12% on Section C Sub Total
Section D Sub total
GST 12% on Section D Sub Total
Section ESub total
GST 12% on Section B Sub Total
General Abstract
Section A Sub total
GST 12% on Section A Sub Total
Section B Sub total
CONTRACTOR
No.of Corrections:.........
No. of Overwritings:.........
SE