184 CFC Distributors, Inc. Jan. 2018 Catalog Phone 800-548-6633

SCH Easy Cut II Cutting System

The SCH Easy Cut II Conversion Kits is a universal cutting system that can be used in any type of crop in the world of agriculture. With the use of spring steel guards, completely hardened sections and roller guides, the Easy Cut II cutting system combines high quality and wear resistant components to pro-

vide the most innovative knife system in the market today. The Easy Cut II system eliminates the need for any adjustments, mean-ing more uptime and less maintenance. SCH has specially designed each part to be universal. By doing so, each of the common components can be used on many different applications. The SCH Easy Cut II system provides a high cutting performance even in extreme harvesting conditions. Every platform on the market today can be updated to the SCH Easy Cut II Conversion Kit.

Roller Guide Conversion KitSCH roller guides greatly reduce the amount of force required from the knife drive to power the knife. On conventional cutting systems the knife runs against a wear plate. With the SCH roller guides, the knife runs against the top and bottom roller guides allowing the knife to move more freely. This also reduces the amount of wear on the knifeback. The top and bottom roller guides are alternated every foot, which allows the knife to move more smoothly across the entire header.

Wear Bar (aka Wear Plate) Conversion KitSCH wear bars have a similar concept as the conventional cutting systems in the market but require less adjusting. The hardened wear plates support the knifeback from behind, while the section rides on top of the wear plate. This feature combined with the box design of the guards creates a tight fitting knife and eliminates the need for hold downs and any adjustments.

What’s Included?Each kit includes all the necessary parts to convert your current header into an Easy Cut II cutting system. Along with this, each kit includes mounting instructions on how to assemble the kit. Every conversion kit also includes 2 extra standard guards and a 10-pack of sections with mounting hardware.

■ Knife Assembly ■ Spacer Plates or Wear Plates■ Roller Guides (if roller kit ordered) ■ Mounting Hardware■ Knifehead ■ Spare Parts■ Guards ■ Mounting Instructions

185Fax 800-528-2554 www.cfcdist.com

Easy Cut Kit Pricing:

SCH Kit Price Adjustments:

All double drive kits Add $294.00All Hiniker bars Add $141.00All Massey Ferguson/Claas combine models Add $141.00All Massey Ferguson 8450 & 8460 models Add $141.00White combines with wobble box & Hart Carter floating cutter bar Deduct $78.00Massey Ferguson combines with wobble box & Hart Carter floating cutter bar Deduct $78.00Pitman arm style drives, Love and Hart Carter (combines only) Deduct $78.00

SCH EASY CUT PricingWidth SCH Kit with

Wear PlatesSCH Kit

with RollersWidth SCH Kit with

Wear PlatesSCH Kit

with Rollers15’ $1,316.92 $1,477.70 24’ $1,875.84 $2,133.1016’ $1,385.84 $1,557.36 25’ $1,921.78 $2,189.78

16.5’ $1,416.44 $1,593.32 30’ $2,166.80 $2,488.4017.5’ $1,485.38 $1,672.94 35’ $2,396.50 $2,771.6418’ 1,523.64 $1,716.60 40’ $2,713.80 $3,142.5820’ $1,653.80 $1,868.20 45’ $3,021.28 $3,535.78

22.5’ $1,814.58 $2,055.78*Installing a roller guide kit on an existing SCH EasyCut cutting system requires a

new knifeback.

186 CFC Distributors, Inc. Jan. 2018 Catalog Phone 800-548-6633

SCH Easy Cut Cutterbar Parts

Heat treated, 7 serrations per inch.Order No. Description Stock RetailSC10978 Chrome section to fit SCH Easy Cut cutting systems. Sold and priced each, must be

ordered in multiples of 25.9316 $1.99

420.100.058 Chrome section to fit SCH Easy Cut, Made in the USA. (aftermarket) Sold and priced each, must be ordered in multiples of 25.

5018 $1.50

SC80503 Bolt and nut package of 50 to fasten sections to bar. 5495 $13.50SC10931 Metric bolt 6 x 16 for attaching sections to bar. 425 $0.30SC10067 Metric bolt 6 x 18 for knifeheads and splice kits. 425 $0.30SC83610 Metric bolt 6 x 20 for knife heads. 628 $0.32SC10071 Metric bolt 6 x 25 for knife heads. 921 $0.36SC10072 Metric bolt 6 x 28 for knife heads. 132 $0.39SC13961 Metric flange nut 6 mm. 414 $0.20

Sections & Bolts

Threaded Inserts for Drive heads and Splice KitsOrder No. Description Stock RetailSC10937 Insert for Splice Kits. 250 $0.69SC10941 Insert for Knifeheads. 928 $0.39SC83607 Splice Kit for SCH sickle assemblies. 06518 $20.80

GuardsOrder No. Description Stock RetailSC16538 SCH 2 point regular guard, 12 mm (Agco 300, 500, 800 and draper, JD 200/900). 31615 $21.50SC16539 SCH 2 point regular guard, 14 mm (HCC, Love). 31614 $21.50SC16540 SCH 2 point regular guard, 17 mm (IH flex, Hesston). 31612 $21.50SC16541 SCH 3 point regular guard, 12 mm. 87236 $43.70SC16542 SCH 3 point regular guard, 14 mm. 87236 $43.70SC16543 SCH 3 point regular guard, 17 mm. 87236 $43.70SC17573 SCH 2 point head guard, 17 mm. 55836 $51.40SC16517 SCH 2 point 12 mm open top reinforced first guard. 52926 $39.00SC16518 SCH 2 point 14 mm open top reinforced first guard. 52924 $39.00SC16470 SCH 2 point 17 mm open top reinforced first guard. 52927 $39.00

SC10628 SC10616 SC10619 SC16470

187Fax 800-528-2554 www.cfcdist.com

Sickle AssembliesReplacement sickle assemblies, please advise make and model for accurate ordering. Retail $22.00/foot.

Order No. Description Stock Retail80279 22.5’ LH knife with overlap parts for a double drive SCH cutting system on heads

that start with a 1/2 section. (for 45’ heads.)521739 $495.00

80280 22.5’ RH knife with overlap parts for a double drive SCH cutting system on heads that start with a 1/2 section. (for 45’ heads.)

521731 $495.00

SC80249 35’ Sickle assembly with 1/2 section for single drive cutterbars. Commonly used on John Deere and MacDon.

057758 $770.00

Here are a few common sickles:

SCH Double Drive PartsOrder No. Description Stock RetailSC16223 Countersunk section for Double Drive Sickles using SCH cutting systems. These sec-

tions are used in the overlap area of the system. Coarse serrations. 9221 $3.05

SC10045 Bolt, countersunk, 6mm x 16mm. Replaces SCH 80012 626 .35SC13666 Overlap strap, 2 sections 04819 $23.00SC13665 Overlap strap, 3 sections 02917 $24.00SC16519 12mm 2-point open top center guard 60928 $38.75SC16520 14mm 2-point open top center guard 60921 $38.75SC16469 17mm 2-point open top center guard 60927 $38.75

188 CFC Distributors, Inc. Jan. 2018 Catalog Phone 800-548-6633

SCH Drive heads Order No. Description Stock RetailSC11207 John Deere 200/900 series drive head for SCH cutting system with OEM wobble box. 571114 $149.00SC14266 Case-IH 1020 drive head for SCH cutting systems with OEM wobble box. 571114 $149.00SC02401 Case-IH 3020 drive head, Left hand for SCH cutting systems with OEM wobble box. 050916 $254.00SC02896 Case-IH 3020 drive head, Right hand for SCH cutting systems with OEM wobble box. 050911 $254.00SC11222 Agco adjustable register knife head. 3/4” threads. 52981 $119.00SCP013997 Agco adjustable register knife head. 7/8” threads. 05886 $118.00SC15421 John Deere 600 series drive head. 571119 $139.00SC11339 John Deere 200/900 series with SCH PRO drive. 524011 $149.00SC81379 MacDon Drive head for Left hand sickle FD70, FD75, A30-S. 83099 $120.50SC81380 MacDon Drive head for Right hand sickle. FD70, FD75 83091 $120.50

SC11207

SCH Wear BarsOrder No. Description Stock Retail

SC17011 Wear plate, 4mm, 2-hole, (brown) 0125 $2.80SC17012 Wear plate, 5mm, 2-hole, (blue) 4426 $3.25SC17013 Wear plate, 6mm, 2-hole, (black) 4335 $4.45SC17014 Wear plate, 4mm, 3-hole, (brown) 3233 $4.30SC17015 Wear plate, 5mm, 3-hole, (blue) 3234 $4.30SC17016 Wear plate, 6mm, 3-hole, (black) 4738 $4.99SC10741 Wear plate, 4mm, 4-hole, (brown) 4721 $3.65SC10742 Wear plate, 5mm, 4-hole, (blue) 3233 $4.30SC10743 Wear plate, 6mm, 4-hole, (black) 4739 $4.99SC10753 Wear plate, 5mm, 4-hole, double sided, (blue) 5948 $6.60SC10754 Wear plate, 6mm, 4-hole, double sided, (black) 0258 $6.93SC82817 SCH Skid plate for MacDon. fits model year 2006 and after,

MacDon 973, 974, FD60, FD70, D60; Case-IH 2052, 2062, 2152, 2162; Required when installing SCH EasyCut on these headers.

52418 $19.00

Number stamped on top of wear plate indicates thickness in millimeters. Color also indicates thickness.

SCH Bridge RollersOrder No. Description Stock RetailSC15768 SCH bridge roller. Introduced in 2007; bolts on top of

guard and edge of roller rides on bottom of the section.31316 $17.50

SC16330 SCH bridge roller. Introduced in 2010; bolts on top of guard and edge of roller rides on top of the section.

31317 $17.50