Upload
hatruc
View
232
Download
6
Embed Size (px)
Citation preview
Catalogo GeneraleGeneral Catalogue
Plexiform 5
INDICE INDEXAMALFIASTROBETACIELOCLIKDELTA DIRETTODELTA INDIRETTODINAMICADINAMICA INCASSODINAMICA RASATODROPEASYECLISSEEKOSFINESTRAFOLIOFUTURAGHIBLILAMINALINEALLINGOTTOMINIVEGAMITOSMONZAONDAOVOPISAPLANETPOKERPRISMAPULSARQUADQUAD INCASSOQUASARROMARUBINOSMERALDOTESISTESIS INCASSOTESIS PIANTANATORINOTRADOTRIADETRIALVEGA
INTRODUZIONE - INTRODUCTIONGUIDA ALLA LETTURA - READING GUIDELEGENDA - LEGENDINDICE FAMIGLIE - FAMILIES INDEX ROSONI - CEILING ROSES SISTEMI DI CONTROLLO - LIGHTING CONTROL SYSTEMSINDICE CODICI - CODES INDEXCONDIZIONI GENERALI DI VENDITA - GENERAL SALE CONDITIONS
9818621878
328206212223844
2522681741982748494
32274
3127056
244302
6650
294162316232238112124260278310306134150146286
6288
226102
6141618
336338342352
6 Plexiform
Questo catalogo 2015-16 rappresenta una vera rivoluzione. Tutti i prodotti presenti sono a LED, ma a completamento dell’offerta Plexiform non vengono eliminati gli apparecchi dotati di sorgenti tradizionali.I nuovi articoli sono stati progettati partendo dalla sorgente luminosa stessa, ideati attorno al LED, sia di alta che di bassa potenza. Linee essenziali, profili minimal, forme moderne e dal design ricercato, finiture accattivanti che ampliano l’offerta architectural di Plexiform. Prodotti performanti che non badano solo alla tecnica ma anche all’estetica, coniugando dimensioni ridotte ad ottime performance luminose.Più di un terzo di questo catalogo è un’assoluta novità: 14 famiglie di nuovi prodotti, tutti rigorosamente a LED.Una vera e propria svolta per Plexiform che, oltre alle novità, continua a proporre gli articoli storici reingegnerizzati per alloggiare la sorgente LED.
SI PROFILA UNA NUOVA LUCE...
Plexiform 7
This 2015-16 catalogue represents a real revolution. All the products are LED, however articles based on traditional light sources have not been deleted from Plexiform’s product offer.The new items have been designed specifically around the high and low power LED. Clean modern lines, minimalistic profiles, refined design and distinctive finishes that extend the architectural offers that Plexiform can provide. These efficient products do take into account not only technical capability but also aesthetics, combining small sizes with excellent luminous performance.More than a third of the catalogue is totally novel: 14 ranges of new products all dedicated to LED.This represents a real breakthrough for Plexiform meaning that, in addition to the new articles, Plexiform will continue to supply traditional products revisited and re-engineered to accommodate LED sources.
WE PROFILE A NEW LIGHT...
8 Plexiform
IT’S A -EVOLUTIONPlexiform negli ultimi anni è stata protagonista di una vera e propria R-evoluzione.L’acquisizione della società nel 2012 da parte di Rossinigroup, azienda leader nella produzione di apparecchi di illuminazione e presente sul mercato da 85 anni, ha portato Plexiform ad essere parte di un gruppo, dove la sinergia e la collaborazione sono elementi necessari e imprescindibili per affrontare le innumerevoli sfide lanciate dall’attuale mercato. Un approccio manageriale e una direzione improntata a fare dell’italianità una caratteristica esportabile all’estero.Nel 2013 Plexiform ha anche cambiato “casa”: dalla storica sede di Cormano alla moderna struttura di Liscate, con un nuovo magazzino che grazie all’introduzione della radiofrequenza consente un’evasione degli ordini molto più rapida ed efficiente.Plexiform non dimentica però la sua storia e le sue radici. Quasi 50 anni di esperienza hanno permesso all’azienda di crescere e di consolidare il suo know-how nel settore illuminotecnico, consentendo una progressiva e continua espansione su scala europea ed internazionale.Queste le basi da cui partiamo ogni giorno: un importante passato che ci consente di avere lo sguardo sempre rivolto al futuro.
Plexiform 9
Plexiform in recent years has been the driving force behind a true R-evolution.The acquisition of the company in 2012 by Rossinigroup, a market leader in the production and marketing of luminaires for the past 85 years, has allowed Plexiform to be absorbed in a group whose synergy and collaborative talents are essential when addressing the complex challenges posed by an ever changing market. A directed managerial approach allows the company to infuse the characteristics present in the Italian culture into a format that becomes readily exportable.In 2013 Plexiform moved from its historical premises in Cormano to a new modern facility in Liscate, a warehouse fully equipped with a wireless computerised stock management system that has allowed Plexiform to manage an even more rapid and efficient orders fulfilment.Plexiform never forgets however its origins and roots. Almost 50 years of experience in the lighting sector have allowed the company to develop and consolidate its know-how in the industrial lighting sector leading to a progressive and continuous expansion into the European and international stage.These are the bases with which we begin every day: an important past which permits us to have our eyes always looking to the future.
10 Plexiform
Sono le nuove tecnologie il motore dell’innovazione. Il LED come base di partenza dei nuovi prodotti, ma anche di rinnovamento degli storici articoli che hanno fatto di Plexiform una solida realtà dell’industria milanese. Abbiamo progettato schede a LED di alta e bassa potenza a seconda delle necessità e delle dimensioni del corpo illuminante. Utilizziamo i migliori LED presenti sul mercato di tipo 5630, con un’efficienza massima pari a 125 lm/W, una resa cromatica di CRI>80 e temperature di colore di 3000K e 4000K. Le schede sono composte da una base d’alluminio per meglio gestire la dissipazione termica. In questo modo si raggiunge la massima durata e una migliore efficienza del LED stesso. Abbiamo progettato diversi prodotti innovativi, concepiti attorno alla scheda a LED di alta potenza e avvalendoci della collaborazione dei migliori fornitori presenti sul mercato. Abbiamo individuato nella tipologia dello Z5 Monster il LED più performante per avere un’ottima resa luminosa in uno spazio ridotto. La tipologia di LED scelto permette un’efficienza massima pari a 140 lm/W ed una resa cromatica di CRI>90 nelle due temperature di colore di 3000K e 4000K.All’interno del catalogo non solo indichiamo il flusso luminoso degli articoli, ma accompagniamo l’utente nella valutazione dell’effettivo risparmio energetico. Una tabella molto intuitiva paragona il prodotto con sorgente tradizionale allo stesso apparecchio con sorgente LED, permettendo all’utilizzatore finale una scelta più consapevole.
LED-FORM
Plexiform 11
New technologies are the driving force of innovation. LED not only is the starting point for the new products, but also the reinvention of many of the historical articles that made Plexiform a solid reality in Milanese industry.We have designed LED boards of both high and low power according to the requirements of the varied luminaries.The low power LED we utilize are the best available in the market (type 5630) with a luminous efficiency of 125 lm/W with a CRI>80 and colour temperatures of 3000K or 4000K. In order to achieve the longest life and maximize the efficiency of the LED, the boards are furnished with an aluminium base which provides excellent heat dissipation.In the design of several innovative products, conceived around high power LED boards, we availed ourselves of the collaboration and advice of the foremost suppliers in the markets. We deduced that in the characteristics of the Z5 Monster we could provide the highest lumen output from reduced luminaire sizes. The high power LED chosen has a luminous efficiency of 140 lm/W with a CRI>90 and colour temperatures of 3000K or 4000K.Within the catalogue we not only state the lumen output of the various luminaries, but we also show a comparison of energy saving against a conventional fluorescent light source.This allows the client to be fully informed in the decision process via the visual graphic shown for each product family.
12 Plexiform
Dalle idee al disegno, dalla prototipazione all’industrializzazione, dalla produzione alla vendita. Tutti i processi sono Made in Italy. Milano come capoluogo d’eccellenza del design e dell’industria. È da queste basi e dalla stretta interazione con il tessuto produttivo lombardo che nascono e si sviluppano i prodotti Plexiform. Apparecchi progettati e modulati anche in base alle richieste del cliente. Prodotti custom, tagliati su misura. Corpi illuminanti a sistema, che rispettano le normative di settore EN 60598 e rappresentano valide soluzioni tecniche per i settori office, retail e home.Ogni prodotto è testato nei laboratori dell’azienda, con l’ausilio e il supporto delle case produttrici dei LED. Fornitori qualificati e certificazione interna EN ISO 9001:2008 permettono di raggiungere standard di qualità elevati e di confermare il Made in Italy come marchio d’eccellenza.
MADE IN PLEXIFORM. MADE IN ITALY.
Plexiform 13
From ideas to design concepts, from prototype to industrial processing, from production to sales. All processes are made in Italy.Plexiform products are conceived and developed from the close interaction with the industry environment of Lombardy, whose capital of excellence in design and industry is Milan.Bespoke items designed according to customer requests or as made to measure. Light sources and systems in accordance with EN 60598 are good technical solutions for office, retail and domestic sectors.Every product is fully tested in the company laboratory with the advice and support of LED manufacturers. Qualified suppliers and internal EN ISO 9001:2008 allow the attainment of the highest quality standards and confirm made in Italy as a stamp of excellence.
14 Plexiform
Ogni prodotto deve essere corredato di accessori, da ordinare con codici e prezzi separati.Per ogni famiglia di prodotto una tabella vi guida nella composizione dell’ordine, segnalando codice dell’accessorio e quantità da ordinare per realizzare il vostro sistema.
Every product requires accessories which must be ordered separately utilising their own code numbers and associated prices.For each product family we provide a guide to customize your order with code details and required accessory quantities in order to complete the desired system.
GUIDA ALLA LETTURA
Esempio d’ordineExample of order
Guida all’ordineOrder guide
Plexiform
OVO
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso- Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be finished with:- Diffusers or antireflection optics - End cap kit- Suspension or ceiling connection kit
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso- Kit giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be finished with:- Diffusers or antireflection optics - Linear joints kit and/or angle joints- End cap kit- Suspension or ceiling connection kit
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with chosen colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
OV10301
SV878
SV880
OV80401
OV80101
SV918
Per realizzare un sistema con 3 OVO 24W di colore nero occorrono:To make a system with 3 OVO 24W black colour you need:
OVO 24W luce diretta 3 pezziOVO 24W direct light pieces
Schermi diffusori 3 pezziDiffusers pieces
Kit giunti lineari 1 pezziLinear joints kit pieces
Giunti angolari 1 pezziAngle joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
Kit sospensione 3 pezziSuspensions kit pieces
Kit giunto lineareLinear joint kit
Giunto angolareAngle joint
Testata terminaleEnd cap
Kit sospensioneSuspension kit
Kit sospensioneSuspension kit
Schermo diffusoreDiffuser
Schermo diffusore
Diffuser
Schermo diffusoreDiffuser
Testata terminaleEnd cap
ESEMPIO DI SISTEMASYSTEM EXAMPLE
OVO OVO
OVO
Kit sospensioneSuspension kit
Esempio composizione sistemaSystem composition example
Nome FamigliaFamily name
Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
65
50
40
Versione ottica antiriflesso UGR<19Version with antireflection optic UGR<19
OVO
Schermo diffusore
Diffuser
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
OV101XX 12W 1300 lm 3000K 540x50x65 1,0 kg
OV102XX 12W 1300 lm 4000K 540x50x65 1,0 kg
OV103XX 24W 2600 lm 3000K 1080x50x65 1,9 kg
OV104XX 24W 2600 lm 4000K 1080x50x65 1,9 kg
OV105XX 36W 3900 lm 3000K 1620x50x65 2,7kg
OV106XX 36W 3900 lm 4000K 1620x50x65 2,7kg
LED A LUCE DIRETTA - DIRECT LIGHT LED
Alimentatore a bordo. I moduli sono completi di schermo diffusore superiore in policarbonato autoestinguente.
Driver on board. Modules have upper diffuser in self-extinguished polycarbonate.
IP20 IK05
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
SEAMLESSNEW
LED A LUCE DIRETTA/INDIRETTA - DIRECT/INDIRECT LIGHT LED
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
OV113XX 24w+12W 3900 lm 3000K 1080x50x65 2,1 kg
OV114XX 24w+12W 3900 lm 4000K 1080x50x65 2,1 kg
OV115XX 36w+24W 6500 lm 3000K 1620x50x65 3,1 kg
OV116XX 36w+24W 6500 lm 4000K 1620x50x65 3,1 kg
Alimentatore a bordo. I moduli sono completi di schermo diffusore superiore in policarbonato autoestinguente.
Driver on board. Modules have upper diffuser in self-extinguished polycarbonate.
IP20 IK050° 15°15° 30°30° 45°45°
60°60°
75°75°
90°90°
105°105°
120°120°
135°135° 150°165°180°Angoli Gamma
60
60
120
120
180
240
SEAMLESSNEW
GIUNTO ANGOLARE SINGOLO LUMINOSO - 90° SINGLE ANGLE LIGHTED JOINT
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
OV804XX 4W 400 lm 3000K 110x110x65 0,6 kg
OV805XX 4W 400 lm 4000K 110x110x65 0,6 kg
65
110
IP20 IK05
Alimentatore a bordo. Permette di realizzare una giunzione a “L” (90°) tra due corpi. Giunti lineari e schermo diffusore in dotazione.Driver on board. Used to make a “L” (90°) joint between two fittings. Linear joints included.
110
SEAMLESSNEW
Plexiform 15
I nuovi codici alfanumerici sono più corti di quelli utilizzati in passato, rendendo molto semplice la composizione dell’ordine.
New alphanumeric codes are shorter compared to previous ones, making ordering a very simple process.
Curva fotometricaPhotometrical data
SimboliSymbol
Simboli normativiStandard symbols
CaratteristicheprodottoProduct features
Codici coloreColour codes
Tabella codici e dati tecniciCodes and technical data sheet
Disegno TecnicoTechnical drawing
READING GUIDE
Codice coloreColour code
OV 101 XX
Codice FamigliaFamily Code
Codici progressiviSequence codes
16 Plexiform
LEGENDATIPI DI CABLAGGIO - TYPES OF WIRING
CE Cablaggio con reattore elettronico Wiring with electronic ballast
CN Cablaggio con reattore ferromagnetico Wiring with ferro-magnetic ballast
CNR Cablaggio con reattore ferromagnetico rifasato Wiring with ferro-magnetic ballast, power factor corrected
SIGLE - ABBREVATION
HE Lampada T5 ad alta efficienza High efficency lamp
HO Lampada T5 ad emissione elevata High output lamp
TC-L Lampada compatta lineare Compact fluorescent lamp
T-R Lampada circolina Circular lamp
CS Con schermo With diffuser
PAR Ottica antiriflesso Antireflection optic
PAR-eco Ottica antiriflesso economica Economic antireflection optic
SDP Schermo diffusore piano Flat diffuser louvre
SLA Schermo lamellare alluminio Aluminium louvre
TP Con tubo in policarbonato With polycarbonate tube
MARCHI E SIMBOLI NORMATIVI - MARKS AND NORMATIVE SYMBOLS
Marchio di conformità della Comunità Europea European Community conformity mark
Apparecchio installabile su superfici normalmente infiammabili Can be installed on flammable surfaces
IP20 Protetto contro la penetrazione di corpi solidi con diametro superiore di 12 mm e non contro i liquidi. Protected against the penetration of solid matter with diameters over 12 mm but not against liquids.
IP40 Protetto contro la penetrazione di corpi solidi con diametro superiore di 1 mm e non contro i liquidi. Protected against the penetration of solid matter with diameters over 1 mm but not against liquids.
IP65 Stagno alla penetrazione della polvere e protetto contro i getti d’acqua. Dust-proof and protected against jets of water.
IK05 Protetto contro l’energia d’urto di 0,7 J. Protected against 0,7 J impact energy.
IK06 Protetto contro l’energia d’urto di 1 J. Protected against 1 J impact energy.
Apparecchio di classe 1. Necessita di messa a terra. Class 1 appliances. These must have their chassis connected to electrical earth.
Apparecchio di classe 2. Doppio isolamento, non necessita di messa a terra. Class 2 appliances. Earthing not required.
Plexiform 17
LEGENDSIMBOLI - SYMBOLS
Prodotto installabile a sospensione Suspension fitting
Prodotto installabile a soffitto Ceiling mounted fitting
Prodotto installabile ad incasso Recessed fitting
Prodotto installabile a parete Wall mounted fitting
Piantana Floor lamp
Prodotto installabile a sistema System installation fitting
Prodotto con sorgente a LED LED fitting
Prodotto con UGR<19UGR<19 UGR<19 fitting
Prodotto con UGR<16UGR<16 UGR<16 fitting
Prodotto con continuità di luceSEAMLESS Continuous linear light
COLORI - COLOURS
01 RAL9005 nero opaco matt black
02 RAL9010 bianco opaco matt white
03 RAL9006 grigio opaco matt grey
04 Cromo Chrome
18 Plexiform
INDICE FAMIGLIEDINAMICA ONDA
DINAMICA INCASSO LINGOTTO
DINAMICA RASATO LAMINA
SistemaSystem
SistemaSystem
SistemaSystem
SistemaSystem
Pag. 22
Pag. 38 Pag. 70
Pag. 66
Pag. 44
Pag. 50 Pag. 78
Pag. 56
Pag. 62 Pag. 88
Pag. 84
Pag. 74
NEW
NEW NEW
NEW NEW
NEW
OVO CIELO
MINIVEGA FOLIO
TRADO TRIADE
SoffittoCeiling
SoffittoCeiling
SoffittoCeiling
SoffittoCeiling
SoffittoCeiling
SoffittoCeiling
SoffittoCeiling
SoffittoCeiling
SistemaSystem
IncassoRecessed
IncassoRecessed
IncassoRecessed
IncassoRecessed
SospensioneSuspension
SospensioneSuspension
SospensioneSuspension
SospensioneSuspension
SospensioneSuspension
SospensioneSuspension
SospensioneSuspension
SospensioneSuspension
SospensioneSuspension
SospensioneSuspension
SEAMLESS
SEAMLESS
SEAMLESS
SEAMLESS
SEAMLESS
NEW
NEW
NEW NEW
NEW
NEW
UGR<19
UGR<19
UGR<19
UGR<16
UGR<19
UGR<19
UGR<19
UGR<19
Plexiform 19
FAMILIES INDEXFUTURA TESIS PIANTANA
AMALFI TESIS INCASSO
VEGA PLANET
SistemaSystem
SistemaSystem
SistemaSystem
Pag. 94
Pag. 98 Pag. 150
Pag. 146
Pag. 102
Pag. 112 Pag. 174
Pag. 124
Pag. 134 Pag. 198
Pag. 186
Pag. 162
NEW
NEW
QUAD ECLISSE
QUAD INCASSO ASTRO
TESIS EKOS
PiantanaFloor lamp
SistemaSystem
SistemaSystem
SoffittoCeiling
SoffittoCeiling
SoffittoCeiling
SoffittoCeiling
SospensioneSuspension
SospensioneSuspension
SistemaSystem
SoffittoCeiling
SospensioneSuspension
SistemaSystem
SoffittoCeiling
SospensioneSuspension
SospensioneSuspension
UGR<19
UGR<19
UGR<19
UGR<19
UGR<19
UGR<19
SoffittoCeiling
PareteWall
SospensioneSuspension
SistemaSystem
SoffittoCeiling
PareteWall
SospensioneSuspension
SistemaSystem
SoffittoCeiling
SospensioneSuspension
IncassoRecessed
IncassoRecessed
IncassoRecessed
IncassoRecessed
20 Plexiform
INDICE FAMIGLIEDELTA DIRETTO MITOS
DELTA INDIRETTO DROP
BETA QUASAR
Pag. 206
Pag. 212 Pag. 252
Pag. 244
Pag. 218
Pag. 226 Pag. 268
Pag. 232
Pag. 238 Pag. 278
Pag. 274
Pag. 260
TRIAL EASY
PRISMA FINESTRA
PULSAR ROMA
SoffittoCeiling
SistemaSystem
SoffittoCeiling
SospensioneSuspension
SistemaSystem
SoffittoCeiling
SospensioneSuspension
SistemaSystem
SospensioneSuspension
SistemaSystem
SoffittoCeiling
SospensioneSuspension
SistemaSystem
SoffittoCeiling
SospensioneSuspension
SistemaSystem
SoffittoCeiling
SospensioneSuspension
SistemaSystem
SoffittoCeiling
SospensioneSuspension
UGR<19
SistemaSystem
SoffittoCeiling
PareteWall
SospensioneSuspension
SoffittoCeiling
SospensioneSuspension
UGR<19
SoffittoCeiling
SospensioneSuspension
UGR<19 IP65
NEW
IncassoRecessed
Plexiform 21
FAMILIES INDEXTORINO POKER
PISA CLIK
MONZA GHIBLI
Pag. 286
Pag. 294 Pag. 328
Pag. 316
Pag. 302
Pag. 306
Pag. 310
Pag. 312
Pag. 322
SMERALDO
RUBINO
LINEAL
SoffittoCeiling
SoffittoCeiling
SoffittoCeiling
SoffittoCeiling
SoffittoCeiling
SistemaSystem
SoffittoCeiling
PareteWall
SoffittoCeiling
UGR<19 IP65
UGR<19 IP65
SoffittoCeiling
IP65
IncassoRecessed
22 Plexiform
Apparecchio con illuminazione a LED, per interni, ad emissione diretta o diretta/indiretta.Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso, verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 110 lm/W Ra ≥80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED fitting for indoor use, direct or direct/indirect light.Ceiling or suspension mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body, epoxy powder coating, resistant to damp enviroments and UV-ray stabilized.Supplied with electronic driver.Our LED, series 5630, are powered by constant current drivers, efficiency 110 lm/W, Ra ≥80, beam angle 120° in CCT 3000K and CCT 4000K versions.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards, EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies to RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
DINAMICASistemaSystem
SoffittoCeiling
SospensioneSuspension
SEAMLESS
UGR<19NEW
Plexiform 23
DINAMICA
KIT SOSPENSIONESUSPENSION KIT
KIT TESTATE TERMINALIEND CAPS KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
KIT GIUNTO LINEARELINEAR JOINT KIT
CORPO ILLUMINANTELIGHTING FITTING
SCHERMO DIFFUSOREDIFFUSER
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Quad FLUO T5 54W 169
Dinamica LED 24W 172
100100%consumo
consumption
EnergySaving
56%
44%consumo
consumption
10
20
30
40
50
60
70
80
90
Quad Fluo T554W
Dinamica LED24W
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
UGR<19
24 Plexiform
Per realizzare un sistema con 3 DINAMICA DOPPIO VERTICALE 24W di colore nero occorrono:To create a system with 3 DINAMICA DOUBLE VERTICAL 24W black colour you require:
DINAMICA DOPPIO VERTICALE 24W 3 pezziDINAMICA DOUBLE VERTICAL 24W pieces
Schermi diffusori 3 pezziDiffusers pieces
Kit giunti lineari 1 pezziLinear joints kit pieces
Giunti angolari 1 pezziAngle joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
Kit sospensione 3 pezziSuspensions kit pieces
DINAMICA
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso- Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Diffusers or antireflection optics - End cap kit- Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso- Kit giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Diffusers or antireflection optics - Linear joints kit and/or angle joints- End cap kit- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
DN11301
SV878
SV880
DN81201
DN80901
DN803
Kit giunto lineareLinear joint kit
Giunto angolareAngle joint
Testata terminaleEnd cap
Kit sospensioneSuspension kit
Kit sospensioneSuspension kit
Schermo diffusoreDiffuser
Schermo diffusore
Diffuser
Schermo diffusoreDiffuser
Testata terminaleEnd cap
ESEMPIO DI SISTEMASYSTEM EXAMPLE
DINAMICA DINAMICA
DIN
AMICA
Kit sospensioneSuspension kit
Plexiform 25
DINAMICADOPPIO VERTICALEcon alimentatore a bordo
DOUBLE VERTICALwith integrated driver
MONOcon alimentatore a bordo
MONOwith integrated driver
DOPPIO ORIZZONTALEcon alimentatore a bordo
DOUBLE HORIZONTALwith integrated driver
MONOcon alimentatore in remoto
MONOwith remote driver
DOPPIO ORIZZONTALEcon alimentatore in remoto
DOUBLE HORIZONTALwith remote driver
26 Plexiform
DINAMICA
Plexiform 2701 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
IP20 IK05
LED DOPPIO VERTICALE A LUCE DIRETTA CON ALIMENTATORE A BORDODIRECT LIGHT DOUBLE VERTICAL LED WITH INTEGRATED DRIVER
Alimentatore a bordo.
Integrated driver.CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DN111XX 12W 1300 lm 3000K 540x46x92 1,8 kg
DN112XX 12W 1300 lm 4000K 540x46x92 1,8 kg
DN113XX 24W 2600 lm 3000K 1080x46x92 3,0 kg
DN114XX 24W 2600 lm 4000K 1080x46x92 3,0 kg
DN115XX 36W 3900 lm 3000K 1620x46x92 4,2 kg
DN116XX 36W 3900 lm 4000K 1620x46x92 4,2 kg
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
IP20 IK05
LED DOPPIO VERTICALE A LUCE DIRETTA/INDIRETTA CON ALIMENTATORE A BORDODIRECT/INDIRECT LIGHT DOUBLE VERTICAL LED WITH INTEGRATED DRIVER
Alimentatore a bordo. I moduli sono completi di schermo diffusore superiore in policarbonato autoestinguente.
Integrated driver. Modules have upper diffuser in self-extinguishing polycarbonate.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DN121XX 24W+12W 3900 lm 3000K 1080x46x92 3,2 kg
DN122XX 24W+12W 3900 lm 4000K 1080x46x92 3,2 kg
DN123XX 36W+24W 6500 lm 3000K 1620x46x92 4,4 kg
DN124XX 36W+24W 6500 lm 4000K 1620x46x92 4,4 kg0° 15°15° 30°30° 45°45°
60°60°
75°75°
90°90°
105°105°
120°120°
135°135° 150°165°180°Angoli Gamma
60
60
120
120
180
180
240
240
300 cd/klm
GIUNTO ANGOLARE SINGOLO LUMINOSO - 90° SINGLE ANGLE ILLUMINATED JOINT
Alimentatore a bordo. Permette di realizzare una giunzione a “L” (90°) tra due corpi. Giunti lineari e schermo diffusore in dotazione.
Integrated driver. Designed to create an “L” (90°) joint between two fittings. Linear joints and diffuser included.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DN812XX 4W 400 lm 3000K 108x108x92 0,5 kg
DN813XX 4W 400 lm 4000K 108x108x92 0,5 kg
IP20 IK05
92
108108
DOPPIO VERTICALE con alimentatore a bordo. Esempio con schermo diffusoreDOUBLE VERTICAL with integrated driver. Example with diffuser
46
92
SEAMLESSNEW
SEAMLESSNEW
SEAMLESSNEW
DINAMICA
28 Plexiform
DINAMICA
46
46
MONO con alimentatore a bordo. Esempio con ottica UGR<19MONO with integrated driver. Example with optic UGR<19
LED MONO A LUCE DIRETTA CON ALIMENTATORE A BORDODIRECT LIGHT MONO LED WITH INTEGRATED DRIVER
Alimentatore a bordo.Copertura: 350 mm.Il montaggio in linea prevede una copertura ogni corpo illuminante.
Integrated driver.Cover: 350 mm.Every fitting mounted in-line has a cover.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DN101XX 12W 1300 lm 3000K 890x46x46 1,2 kg
DN102XX 12W 1300 lm 4000K 890x46x46 1,2 kg
DN103XX 24W 2600 lm 3000K 1430x46x46 1,8 kg
DN104XX 24W 2600 lm 4000K 1430x46x46 1,8 kg
DN105XX 36W 3900 lm 3000K 1970x46x46 2,4 kg
DN106XX 36W 3900 lm 4000K 1970x46x46 2,4 kg IP20 IK05
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
COPERTURA: 350 mmCOVER: 350 mm
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
NEW
DINAMICA
Plexiform 29
30 Plexiform
DINAMICA
Plexiform 3101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
DINAMICA
SOSPENSIONE LED MONO A LUCE DIRETTA CON ALIMENTATORE IN REMOTODIRECT LIGHT MONO LED SUSPENSION WITH REMOTE DRIVER
Alimentatore in remoto.Kit sospensione e rosone elettrificato inclusi.
Remote driver.Suspension kit and electrified ceiling rose included
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DN141XX 12W 1300 lm 3000K 540x46x46 2,0 kg
DN142XX 12W 1300 lm 4000K 540x46x46 2,0 kg
DN143XX 24W 2600 lm 3000K 1080x46x46 2,6 kg
DN144XX 24W 2600 lm 4000K 1080x46x46 2,6 kg
DN145XX 36W 3900 lm 3000K 1620x46x46 3,2 kg
DN146XX 36W 3900 lm 4000K 1620x46x46 3,2 kg
IP20 IK05
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
46
46
SEAMLESS
SEAMLESS
NEW
GIUNTO ANGOLARE SINGOLO LUMINOSO - 90° SINGLE ANGLE ILLUMINATED JOINT
Alimentatore in remoto. Permette di realizzare una giunzione a “L” (90°) tra due corpi. Giunti lineari e schermo diffusore in dotazione.
Remote driver. Designed to create an “L” (90°) joint between two fittings. Linear joints and diffuser included.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DN810XX 4W 400 lm 3000K 108x108x46 0,5 kg
DN811XX 4W 400 lm 4000K 108x108x46 0,5 kg
IP20 IK05
46
108 108
NEW
MONO con alimentatore in remoto. Esempio con schermo diffusoreMONO with remote driver. Example with diffuser
ALIMENTATORE: 400 mmDRIVER: 400 mm
32 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
DINAMICA
IP20 IK05
LED DOPPIO ORIZZONTALE A LUCE DIRETTA CON ALIMENTATORE A BORDODIRECT LIGHT DOUBLE HORIZONTAL LED WITH INTEGRATED DRIVER
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DN131XX 24W 2600 lm 3000K 890x92x46 2,2 kg
DN132XX 24W 2600 lm 4000K 890x92x46 2,2 kg
DN133XX 48W 5200 lm 3000K 1430x92x46 3,4 kg
DN134XX 48W 5200 lm 4000K 1430x92x46 3,4 kg
DN135XX 72W 7800 lm 3000K 1970x92x46 4,6 kg
DN136XX 72W 7800 lm 4000K 1970x92x46 4,6 kg
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma Alimentatore a bordo.Copertura: 350 mm.
Integrated driver.Cover: 350 mm.
DOPPIO ORIZZONTALE con alimentatore a bordo. Esempio con ottica UGR<19DOUBLE HORIZONTAL with integrated driver. Example with optic UGR<19
92
46
NEW
COPERTURA: 350 mmCOVER: 350 mm
Plexiform 33
DINAMICA
34 Plexiform
DINAMICA
Plexiform 3501 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
DINAMICA
IP20 IK05
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DN151XX 24W 2600 lm 3000K 540x92x46 3,0 kg
DN152XX 24W 2600 lm 4000K 540x92x46 3,0 kg
DN153XX 48W 5200 lm 3000K 1080x92x46 4,2 kg
DN154XX 48W 5200 lm 4000K 1080x92x46 4,2 kg
DN155XX 72W 7800 lm 3000K 1620x92x46 5,4 kg
DN156XX 72W 7800 lm 4000K 1620x92x46 5,4 kg
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma Alimentatore in remoto.Kit sospensione e rosone elettrificato inclusi.
Remote driver.Suspension kit and electrified ceiling rose included.
DOPPIO ORIZZONTALE con alimentatore in remoto. Esempio con schermo diffusoreDOUBLE HORIZONTAL with remote driver. Example with diffuser
SOSPENSIONE LED DOPPIO ORIZZONTALE A LUCE DIRETTA CON ALIMENTATORE IN REMOTODIRECT LIGHT DOUBLE HORIZONTAL LED SUSPENSION WITH REMOTE DRIVER
92
46
SEAMLESSNEW
ALIMENTATORE: 400 mmDRIVER: 400 mm
36 Plexiform
DescrizioneDescription
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
CodiceCode
Dimensioni mmDimensions mm
DINAMICAAccessori Accessories
Kit Testate terminali verniciate Coppia di testate in pressofusione di alluminio, verniciate. Fissaggio ad innesto con viti. Da usare su moduli singoli o sugli ultimi della linea.
Powder coated end caps kit Pair of end caps in die-cast aluminium, powder coated. Clip on fixture with screws. To be used on single modules or on the last modules of the line.
Kit Testate terminali per DOPPIO VERTICALE verniciate Due coppie di testate in pressofusione di alluminio, verniciate. Fissaggio ad innesto con viti. Da usare su moduli singoli o sugli ultimi della linea.
DOUBLE VERTICAL powder coated end caps kit Two pairs of end caps in die-cast aluminium, powder coated. Clip on fixture with screws. To be used on single modules or on the last modules of the line.
DN801XX 46x46x5
DN809XX 46x92x5
46
465
92
465
Kit attacco a soffitto per MONOIn lamiera verniciata, fissaggio con viti. Permette di fissare i corpi direttamente a soffitto.
MONO ceiling connection kitPowder coated steel sheet fixed with screws. Allows the fitting to be installed directly on the ceiling.
SV881XX 20x20x1224x20x17
1712
24
20 20
Kit attacco a soffitto per DOPPIO ORIZZONTALE In lamiera verniciata, fissaggio con viti. Permette di fissare i corpi direttamente a soffitto.
DOUBLE HORIZONTAL ceiling connection kit Powder coated steel sheet fixed with screws. Allows the fitting to be installed directly on the ceiling.
DN802XX 20x12x2054x30x20 30
2020
54
12 20
Kit attacco a soffitto per DOPPIO VERTICALE In lamiera verniciata, fissaggio con viti. Permette di fissare i corpi direttamente a soffitto.
DOUBLE VERTICAL ceiling connection kit Powder coated steel sheet fixed with screws. Allows the fitting to be installed directly on the ceiling.
DN814XX 20x20x3224x20x17
Schermo diffusore opaleIn policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
Opal diffuser Internally splined self-extinguishing polycarbonate, snap on fixture. Reduce dazzle and creates an IP40 degree protection of the fitting.
SV877 540 mm - 12WSV878 1080 mm - 24WSV879 1620 mm - 36W
Ottica antiriflesso UGR<19Lamellare in alluminio satinato, antiriflesso. Fissaggio a scatto. Adatta per uffici con videoterminali.
Antireflection optic UGR<19 Laminated matt antiglare aluminium. Snap on fixture. Suitable for offices with VDU’s.
SV927 540x30x35 - 12WSV928 1080x30x35 - 24WSV929 1620x30x35 - 36W
30
35
2
37
540-1080-1620
1732
24
20 20
Plexiform 37
DescrizioneDescription
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Codice Code
Dimensioni mmDimensions mm
DINAMICAAccessori Accessories
Kit sospensione per DOPPIO VERTICALE Coppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile. Per rosoni semplici ed elettrificati vedere pag. 336-337.
DOUBLE VERTICAL suspension kit.Pair of chromed brass ceiling roses, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Allows adjustable installation height of the suspension. For simple and electrified ceiling roses go to page 336-337.
DN803 Ø16x44
Kit giunto lineare a scomparsaIn lamiera di acciaio zincata, fissaggio con viti. Permette di realizzare una giunzione “invisibile” di due corpi in linea.
Invisible linear joint kitGalvanized steel, fixed with screws. Allows the creation of an “invisible” joint between two linear fittings.
SV880 15,5x36x4,5
4,5
3615,5
DN808XX 137x137x46 Giunto angolare cieco per DOPPIO ORIZZONTALE In estruso di alluminio, verniciato, fissaggio con viti. Permette di realizzare una giunzione a “L” (90°) tra due moduli. Giunti lineari in dotazione.
90° DOUBLE HORIZONTAL blank angle joint Extruded aluminium, powder coated, screw fixing. Designed to create an “L” (90°) joint between two modules. Linear joints included.
Giunto angolare cieco per MONOIn estruso di alluminio, verniciato, fissaggio con viti. Permette di realizzare una giunzione a “L” (90°) tra due corpi. Giunti lineari in dotazione.
90° MONO blank angle joint Extruded aluminium, powder coated, screw fixing. Designed to create an “L” (90°) joint between two fittings. Linear joints included.
DN806XX 108x108x46
137 137
46
46
108 108
DN807XX 108x108x92 Giunto angolare cieco per DOPPIO VERTICALE In estruso di alluminio, verniciato, fissaggio con viti. Permette di realizzare una giunzione a “L” (90°) tra due corpi. Giunti lineari in dotazione.
90° DOUBLE VERTICAL blank angle jointExtruded aluminium, powder coated, screw fixing. Designed to create an “L” (90°) joint between two fittings. Linear joints included.
92
108108
Kit sospensione per MONO Coppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile. Per rosoni semplici ed elettrificati vedere pag. 336-337.
MONO suspension kitPair of chromed brass ceiling roses, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Allows adjustable installation height of the suspension. For simple and electrified ceiling roses go to page 336-337.
SV918 Ø16x44
44
Ø 16
44
Ø 16
Kit sospensione per DOPPIO ORIZZONTALECoppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile. Per rosoni semplici ed elettrificati vedere pag. 336-337.
DOUBLE HORIZONTAL suspension kit Pair of chromed brass ceiling roses, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Allows adjustable installation height of the suspension. For simple and electrified ceiling roses go to page 336-337.
SV920 Ø16x44
44
Ø 16
38 Plexiform
Apparecchio con illuminazione a LED, per interni ad emissione diretta.Installazione ad incasso. Possibilità di configurazione in fila continua con giunti lineari ed angolari. Corpo in alluminio estruso, verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 110 lm/W Ra ≥80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED fitting for indoor use, direct light.Recessed mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body, epoxy powder coating, resistant to damp enviroments and UV-ray stabilized.Supplied with electronic driver.Our LED, series 5630, are powered by constant current drivers, efficiency 110 lm/W, Ra ≥80, beam angle 120° in CCT 3000K and CCT 4000K versions.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards, EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies to RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
DINAMICA INCASSO
SistemaSystem
IncassoRecessed
SEAMLESS
UGR<19NEW
Plexiform 39
INCASSO DINAMICA
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Quad incasso FLUO T5 54W 169
Dinamica incasso LED 24W 178
KIT TESTATE TERMINALIEND CAPS KIT
KIT GIUNTO LINEARELINEAR JOINT KIT
CORPO ILLUMINANTELIGHTING FITTING
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
SCHERMO DIFFUSOREDIFFUSER
100100%consumo
consumption
EnergySaving
56%
44%consumo
consumption
10
20
30
40
50
60
70
80
90
Quad incasso Fluo T554W
Dinamica incasso LED24W
UGR<19
40 Plexiform
DINAMICA INCASSO
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso- Kit testate terminali
SINGLE MOUNTING All fittings must be completed with:- Diffusers or antireflection optics - End cap kit
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso- Giunti lineari e/o giunti angolari- Kit testate terminali
IN-LINE MOUNTING All fittings must be completed with:- Diffusers or antireflection optics - Linear joints and/or angle joints- End cap kit
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
DI10301
SV878
SV880
DI80301
DI80101
ESEMPIO D’ORDINE
EXAMPLE OF ORDERPer realizzare un sistema con 3 DINAMICA INCASSO 24W di colore nero occorrono:To create a system with 3 DINAMICA INCASSO 24W black colour you require:
DINAMICA INCASSO 24W 3 pezziDINAMICA INCASSO 24W pieces
Schermi diffusori 3 pezziDiffusers pieces
Kit giunti lineari 1 pezziLinear joints kit pieces
Giunti angolari 1 pezziAngle joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
Schermo diffusoreDiffuser
Schermo diffusore
Diffuser
Schermo diffusoreDiffuser
Kit giunto lineareLinear joint kit
Giunto angolareAngle joint
Testata terminaleEnd cap
Testata terminaleEnd cap
DINAMICA INCASSO DINAMICA INCASSO
DIN
AMICA IN
CASSO
ESEMPIO DI SISTEMASYSTEM EXAMPLE
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
42 Plexiform
DINAMICA INCASSO
62
42
45
Molla in acciao armonico, consente l’installazione del corpo in cartongesso con spessore da 10 mm a 30 mm.
Sprune steel brackets allowing installations in a plaster board ceiling of thickness 10 mm up to 30 mm.
MOLLA PER INCASSO INCLUSA INCLUDED RECESSED BRACKET
Ottica antiriflesso in alluminio satinato, UGR<19.Adatta per uffici con video terminali.
Matt aluminium antireflection optic, UGR<19.Suitable for offices with VDU’s.
OTTICA ANTIRIFLESSO ANTIRIFLECTION OPTIC
FORO HOLE
50+- 3
Kit Testate terminali verniciate Coppia di testate in pressofusione di alluminio, verniciate. Fissaggio ad innesto con viti. Da usare su moduli singoli o sugli ultimi della linea.
Powder coated end caps kit Pair of end caps in die-cast aluminium, powder coated. Clip on fixture with screws. To be used on single modules or on the last modules of the line.
DI801XX 62x30x10
30
62
10
Schermo diffusore opaleIn policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
Opal diffuser Internally splined self-extinguishing polycarbonate, snap on fixture. Reduce dazzle and creates an IP40 degree protection of the fitting.
Kit giunto lineare a scomparsaIn lamiera di acciaio zincata, fissaggio con viti. Permette di realizzare una giunzione “invisibile” di due corpi in linea.
Invisible linear joint kitGalvanized steel, fixed with screws. Allows the creation of an “invisible” joint between two linear fittings.
SV880 15,5x36x4,5
30
Ottica antiriflesso UGR<19Lamellare in alluminio satinato, antiriflesso. Fissaggio a scatto. Adatta per uffici con videoterminali.
Antireflection optic UGR<19 Laminated matt antiglare aluminium. Snap on fixture. Suitable for offices with VDU’s.
DI805 540x30x35 - 12WDI806 1080x30x35 - 24WDI807 1620x30x35 - 36W
35
4,5
3615,5
2
37
540-1080-1620
SV877 540 mm - 12WSV878 1080 mm - 24WSV879 1620 mm - 36W
Plexiform 4301 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
INCASSO DINAMICA
IP20 IK05
INCASSO LED - RECESSED LED
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DI101XX 12W 1300 lm 3000K 540x62x45 0,9 kg
DI102XX 12W 1300 lm 4000K 540x62x45 0,9 kg
DI103XX 24W 2600 lm 3000K 1080x62x45 1,4 kg
DI104XX 24W 2600 lm 4000K 1080x62x45 1,4 kg
DI105XX 36W 3900 lm 3000K 1620x62x45 2,1 kg
DI106XX 36W 3900 lm 4000K 1620x62x45 2,1 kg
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
GIUNTO ANGOLARE SINGOLO LUMINOSO - 90° SINGLE ANGLE ILLUMINATED JOINT
Permette di realizzare una giunzione a “L” (90°) tra due corpi. Giunti lineari e schermo diffusore in dotazione.
Designed to create an “L” (90°) joint between two fittings. Linear joints and diffuser included.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DI803XX 4W 400 lm 3000K 116x116x45 0,5 kg
DI804XX 4W 400 lm 4000K 116x116x45 0,5 kg
IP20 IK05
45
116 116
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
ACCESSORI - ACCESSORIES
SEAMLESS
SEAMLESS
NEW
NEW
44 Plexiform
Apparecchio con illuminazione a LED, per interni ad emissione diretta.Installazione ad incasso a scomparsa totale (senza cornice). Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso, colore bianco. Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 110 lm/W Ra ≥80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED fitting for indoor use, direct light.Recessed mounted, frameless.It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body, white coloured. Epoxy powder coating, resistant to damp enviroments and UV-ray stabilized.Supplied with electronic driver, wiring in line.Our LED, series 5630, are powered by constant current drivers, efficiency 110 lm/W, Ra ≥80, beam angle 120° in CCT 3000K and CCT 4000K versions.Product complies with current EN 60598 electric safety standards, EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies to RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
DINAMICA RASATO
SistemaSystem
IncassoRecessed
SEAMLESS
UGR<19NEW
Plexiform 45
RASATO DINAMICA
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Quad incasso FLUO T5 54W 169
Dinamica incasso LED 24W 178
KIT TESTATE TERMINALIEND CAPS KIT
KIT GIUNTO LINEARELINEAR JOINT KIT
CORPO ILLUMINANTELIGHTING FITTING
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
SCHERMO DIFFUSOREDIFFUSER
100100%consumo
consumption
EnergySaving
56%
44%consumo
consumption
10
20
30
40
50
60
70
80
90
Quad incasso Fluo T554W
Dinamica incasso LED24W
UGR<19
46 Plexiform
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso- Kit testate terminali
SINGLE MOUNTING All fittings must be completed with:- Diffusers or antireflection optics - End cap kit
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso- Kit giunti lineari e/o giunti angolari- Kit testate terminali
IN-LINE MOUNTING All fittings must be completed with:- Diffusers or antireflection optics - Linear joints kit and/or angle joints- End cap kit
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare un sistema con 3 DINAMICA RASATO 24W di occorrono:To create a system with 3 DINAMICA FRAMELESS 24W you require:
DINAMICA RASATO 24W 3 pezziDINAMICA FRAMELESS 24W pieces
Schermi diffusori 3 pezziDiffusers pieces
KIT giunti lineari 1 pezziLinear joints kit pieces
Giunti angolari 1 pezziAngle joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
DR103
SV878
SV880
DR803
DR801
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
DINAMICA RASATO
Schermo diffusoreDiffuser
Schermo diffusore
Diffuser
Schermo diffusoreDiffuser
Kit giunto lineareLinear joint kit
Giunto angolareAngle joint
Testata terminaleEnd cap
Testata terminaleEnd cap
DINAMICA RASATO DINAMICA RASATO
DIN
AMICA R
ASATO
ESEMPIO DI SISTEMASYSTEM EXAMPLE
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 47
RASATO DINAMICA
48 Plexiform
DINAMICA RASATO
42
70
Ottica antiriflesso in alluminio satinato, UGR<19.Adatta per uffici con video terminali.
Matt aluminium antireflection optic, UGR<19.Suitable for offices with VDU’s.
Staffa per incasso in alluminio microforato, a tiraggio con viti.Permette l’installazione a filo su cartongesso a scomparsa totale.
Aluminium microperforated recessed bracket.Can be installed in a plasterboard for frameless applications.
STAFFA PER INCASSO INCLUSA
OTTICA ANTIRIFLESSO
INCLUDED RECESSED BRACKET
ANTIRIFLECTION OPTIC
Plexiform 4901 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
RASATO DINAMICA
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit Testate terminali Coppia di testate in alluminio, verniciate. Fissaggio ad innesto con viti. Da usare su moduli singoli o sugli ultimi della linea.
End caps kit Pair of aluminium end caps, powder coated. Clip on fixture with screws. To be used on single modules or on the last modules of the line.
DR801 42x42x1
ACCESSORI - ACCESSORIES
42
421
Schermo diffusore opaleIn policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
Opal diffuser Internally splined self-extinguishing polycarbonate, snap on fixture. Reduce dazzle and creates an IP40 degree protection of the fitting.
Kit giunto lineare a scomparsaIn lamiera di acciaio zincata, fissaggio con viti. Permette di realizzare una giunzione “invisibile” di due corpi in linea.
Invisible linear joint kitGalvanized steel, fixed with screws. Allows the creation of an “invisible” joint between two linear fittings.
SV880 15,5x36x4,5
IP20 IK05
INCASSO LED - RECESSED LED FITTING
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DR101 12W 1300 lm 3000K 540x42x70 1,0 kg
DR102 12W 1300 lm 4000K 540x42x70 1,0 kg
DR103 24W 2600 lm 3000K 1080x42x70 1,6 kg
DR104 24W 2600 lm 4000K 1080x42x70 1,6 kg
DR105 36W 3900 lm 3000K 1620x42x70 2,3 kg
DR106 36W 3900 lm 4000K 1620x42x70 2,3 kg
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
GIUNTO ANGOLARE SINGOLO LUMINOSO - 90° SINGLE ANGLE ILLUMINATED JOINT
Permette di realizzare una giunzione a “L” (90°) tra due corpi. Giunti lineari e schermo diffusore in dotazione.
Designed to create an “L” (90°) joint between two fittings. Linear joints and diffuser included.
Bianco opaco.Matt white.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DR803 4W 400 lm 3000K 106x106x70 0,5 kg
DR804 4W 400 lm 4000K 106x106x70 0,5 kg
IP20 IK05
30
Ottica antiriflesso UGR<19Lamellare in alluminio satinato, antiriflesso. Fissaggio a scatto. Adatta per uffici con videoterminali.
Antireflection optic UGR<19 Laminated matt antiglare aluminium. Snap on fixture. Suitable for offices with VDU’s.
SV927 540x30x35 - 12WSV928 1080x30x35 - 24WSV929 1620x30x35 - 36W
35
70
106 106
4,5
3615,5
SV877 540 mm - 12WSV878 1080 mm - 24WSV879 1620 mm - 36W
SEAMLESS
SEAMLESS
NEW
NEW
2
37
540-1080-1620
50 Plexiform
Apparecchio con illuminazione a LED, per interni ad emissione diretta o diretta/indiretta.Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso, verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 110 lm/W Ra ≥80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED fitting for indoor use, direct or direct/indirect light.Ceiling suspension and wall mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body, epoxy powder coating, resistant to damp enviroments and UV-ray stabilized.Supplied with electronic driver, wiring in line.Our LED, series 5630, are powered by constant current drivers, efficiency 110 lm/W, Ra ≥80, beam angle 120° in CCT 3000K and CCT 4000K versions.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards, EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies to RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
OVOSistemaSystem
SoffittoCeiling
SospensioneSuspension
SEAMLESS
UGR<19NEW
Plexiform 51
OVO
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Ovo FLUO T5 54W 169
Ovo LED 24W 172
CORPO ILLUMINANTELIGHTING FITTING
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
SCHERMO DIFFUSOREDIFFUSER
KIT SOSPENSIONESUSPENSION KIT
KIT TESTATE TERMINALIEND CAPS KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
KIT GIUNTO LINEARELINEAR JOINT KIT
100%consumo
consumption
EnergySaving
56%
44%consumo
consumption
100
10
20
30
40
50
60
70
80
90
Ovo Fluo T554W
Ovo LED24W
UGR<19
52 Plexiform
OVO
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso- Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Diffusers or antireflection optics - End cap kit- Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso- Kit giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Diffusers or antireflection optics - Linear joints kit and/or angle joints- End cap kit- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
ESEMPIO D’ORDINE EXAMPLE OF ORDER
OV10301
SV878
SV880
OV80401
OV80101
SV918
Per realizzare un sistema con 3 OVO 24W di colore nero occorrono:To create a system with 3 OVO 24W black colour you require:
OVO 24W luce diretta 3 pezziOVO 24W direct light pieces
Schermi diffusori 3 pezziDiffusers pieces
Kit giunti lineari 1 pezziLinear joints kit pieces
Giunti angolari 1 pezziAngle joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
Kit sospensione 3 pezziSuspensions kit pieces
Kit giunto lineareLinear joint kit
Giunto angolareAngle joint
Testata terminaleEnd cap
Kit sospensioneSuspension kit
Kit sospensioneSuspension kit
Schermo diffusoreDiffuser
Schermo diffusore
Diffuser
Schermo diffusoreDiffuser
Testata terminaleEnd cap
ESEMPIO DI SISTEMASYSTEM EXAMPLE
OVO OVO
OVO
Kit sospensioneSuspension kit
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 53
OVO
54 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
65
50
40
Versione ottica antiriflesso UGR<19Version with antireflection optic UGR<19
OVO
Schermo diffusore
Diffuser
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
OV101XX 12W 1300 lm 3000K 540x50x65 1,0 kg
OV102XX 12W 1300 lm 4000K 540x50x65 1,0 kg
OV103XX 24W 2600 lm 3000K 1080x50x65 1,9 kg
OV104XX 24W 2600 lm 4000K 1080x50x65 1,9 kg
OV105XX 36W 3900 lm 3000K 1620x50x65 2,7kg
OV106XX 36W 3900 lm 4000K 1620x50x65 2,7kg
LED A LUCE DIRETTA - DIRECT LIGHT LED
Alimentatore a bordo.
Integrated driver.
IP20 IK05
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
SEAMLESSNEW
LED A LUCE DIRETTA/INDIRETTA - DIRECT/INDIRECT LIGHT LED
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
OV113XX 24W+12W 3900 lm 3000K 1080x50x65 2,1 kg
OV114XX 24W+12W 3900 lm 4000K 1080x50x65 2,1 kg
OV115XX 36W+24W 6500 lm 3000K 1620x50x65 3,1 kg
OV116XX 36W+24W 6500 lm 4000K 1620x50x65 3,1 kg
Alimentatore a bordo. I moduli sono completi di schermo diffusore superiore in policarbonato autoestinguente.
Integrated driver. Modules have upper diffuser in self-extinguishing polycarbonate.
IP20 IK050° 15°15° 30°30° 45°45°
60°60°
75°75°
90°90°
105°105°
120°120°
135°135° 150°165°180°Angoli Gamma
60
60
120
120
180
180
240
240
300 cd/klm
SEAMLESSNEW
GIUNTO ANGOLARE SINGOLO LUMINOSO - 90° SINGLE ANGLE ILLUMINATED JOINT
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
OV804XX 4W 400 lm 3000K 110x110x65 0,6 kg
OV805XX 4W 400 lm 4000K 110x110x65 0,6 kg
65
110
IP20 IK05
Alimentatore a bordo. Permette di realizzare una giunzione a “L” (90°) tra due corpi. Giunti lineari e schermo diffusore in dotazione.Integrated driver. Designed to create an “L” (90°) joint between two fittings. Linear joints included.
110
SEAMLESSNEW
Plexiform 5501 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
OVOAccessori Accessories
CodiceCode
Dimensioni mmDimensions mm
DescrizioneDescription
Kit giunto lineare a scomparsa In lamiera di acciaio zincata, fissaggio con viti. Permette di realizzare una giunzione “invisibile” di due corpi in linea.
Invisible linear joint kitGalvanized steel, fixed with screws. Allows the creation of an “invisible” joint between two linear fittings.
SV880 15,5x36x4,5
Giunto angolare cieco In estruso di alluminio, verniciato, fissaggio con viti. Permette di realizzare una giunzione a “L” (90°) tra due corpi. Giunti lineari in dotazione.
90° blank angle jointExtruded aluminium, powder coated, screw fixing. Designed to create an “L” (90°) joint between two fittings. Linear joints included.
OV803XX 110x110x65
65
110 110
Kit Testate terminali verniciate Coppia di testate in pressofusione di alluminio, verniciate. Fissaggio ad innesto con viti. Da usare su moduli singoli o sugli ultimi della linea.
Powder coated end caps kit Pair of end caps in die-cast aluminium, powder coated. Clip on fixture with screws. To be used on single modules or on the last modules of the line.
OV801XX 50x65x7
Schermo diffusore opaleIn policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
Opal diffuser Internally splined self-extinguishing polycarbonate, snap on fixture. Reduce dazzle and creates an IP40 degree protection of the fitting.
65
507
Kit attacco a soffittoIn lamiera verniciata, fissaggio con viti. Permette di fissare i corpi direttamente a soffitto.
Ceiling connection kitPowder coated steel sheet fixed with screws. Allows the fitting to be installed directly on the ceiling.
OV802XX 20x20x3824x20x17
1738
24
20 20
Ottica antiriflesso UGR<19Lamellare in alluminio satinato, antiriflesso. Fissaggio a scatto. Adatta per uffici con videoterminali.
Antireflection optic UGR<19 Laminated matt antiglare aluminium. Snap on fixture. Suitable for offices with VDU’s.
OV806 540x30x35 - 12WOV807 1080x30x35 - 24WOV808 1620x30x35 - 36W
30
35
4,5
3615,5
2
37
540-1080-1620
Kit sospensioneCoppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile. Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kitPair of chromed brass ceiling roses, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Allows adjustable installation height of the suspension. For simple and electrified ceiling roses go to page 336-337.
SV918 Ø16x44
44
Ø 16
SV877 540 mm - 12WSV878 1080 mm - 24WSV879 1620 mm - 36W
56 Plexiform
Apparecchio con illuminazione a LED, per interni ad emissione diretta o diretta/indiretta.Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari. Corpo in alluminio estruso, verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 110 lm/W Ra ≥80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED fitting for indoor use, direct or direct/indirect light.Ceiling or suspension mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body, epoxy powder coating, resistant to damp enviroments and UV-ray stabilized.Supplied with electronic driver, wiring in line.Our LED, series 5630, are powered by constant current drivers, efficiency 110 lm/W, Ra ≥80, beam angle 120° in CCT 3000K and CCT 4000K versions.Product complies with current EN 60598 electric safety standards, EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies to RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
MINIVEGASistemaSystem
SoffittoCeiling
SospensioneSuspension
SEAMLESSNEW
Plexiform 57
MINIVEGA
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Quad FLUO T5 54W 169
Minivega LED 24W 188
CORPO ILLUMINANTELIGHTING FITTING
SCHERMO DIFFUSOREDIFFUSER
KIT SOSPENSIONESUSPENSION KIT
KIT TESTATE TERMINALIEND CAPS KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
KIT GIUNTO LINEARELINEAR JOINT KIT
100%consumo
consumption
EnergySaving
56%
44%consumo
consumption
100
10
20
30
40
50
60
70
80
90
Quad Fluo T554W
Minivega LED24W
58 Plexiform
MINIVEGA
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori- Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Diffusers - End cap kit- Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori- Giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Diffusers - Linear joints and/or angle joints- End cap kit- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
ESEMPIO D’ORDINE EXAMPLE OF ORDER
MV10301
MV803
SV880
MV81001
MV80101
MV806
Per realizzare un sistema con 3 MINIVEGA 24W di colore nero occorrono:To create a system with 3 MINIVEGA 24W black colour you require:
MINIVEGA 24W luce diretta 3 pezziMINIVEGA 24W direct light pieces
Schermi diffusori 3 pezziDiffusers pieces
Giunti lineari 1 pezziLinear joints pieces
Giunti angolari 1 pezziAngle joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
Kit sospensione 3 pezziSuspensions kit pieces
Kit giunto lineareLinear joint kit
Giunto angolareAngle joint
Testata terminaleEnd cap
Kit sospensioneSuspension kit
Kit sospensioneSuspension kit
Schermo diffusoreDiffuser
Schermo diffusore
Diffuser
Schermo diffusoreDiffuser
Testata terminaleEnd cap
ESEMPIO DI SISTEMASYSTEM EXAMPLE
MINIVEGA MINIVEGA
MIN
IVEGA
Kit sospensioneSuspension kit
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 5901 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
MINIVEGA
60 Plexiform
65
100
Versione con schermo diffusoreVersion with diffuser
MINIVEGA
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
MV101XX 12W 1300 lm 3000K 540x100x50 1,2 kg
MV102XX 12W 1300 lm 4000K 540x100x50 1,2 kg
MV103XX 24W 2600 lm 3000K 1080x100x50 2,1 kg
MV104XX 24W 2600 lm 4000K 1080x100x50 2,1 kg
MV105XX 36W 3900 lm 3000K 1620x100x50 3,1 kg
MV106XX 36W 3900 lm 4000K 1620x100x50 3,1 kg
LED A LUCE DIRETTA - DIRECT LIGHT LED
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma Alimentatore a bordo.
Integrated driver.
IP20 IK05
SEAMLESSNEW
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
MV113XX 24W+12W 3900 lm 3000K 1080x100x50 2,3 kg
MV114XX 24W+12W 3900 lm 4000K 1080x100x50 2,3 kg
MV115XX 36W+24W 6500 lm 3000K 1620x100x50 3,5 kg
MV116XX 36W+24W 6500 lm 4000K 1620x100x50 3,5 kg
LED A LUCE DIRETTA/INDIRETTA - DIRECT/INDIRECT LIGHT LED
Alimentatore a bordo. I moduli sono completi di schermo diffusore superiore in policarbonato autoestinguente.
Integrated driver. Modules have upper diffuser in self-extinguishing polycarbonate.
IP20 IK05
0° 15°15° 30°30° 45°45°
60°60°
75°75°
90°90°
105°105°
120°120°
135°135° 150°165°180°Angoli Gamma
60
60
120
120
180
180
240
240
300 cd/klm
SEAMLESSNEW
50
135 135
GIUNTO ANGOLARE SINGOLO LUMINOSO - 90° SINGLE ANGLE ILLUMINATED JOINT
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
MV810XX 4W 400 lm 3000K 135x135x50 0,7 kg
MV811XX 4W 400 lm 4000K 135x135x50 0,7 kg
IP20 IK05
Alimentatore a bordo. Permette di realizzare una giunzione a “L” (90°) tra due corpi. Giunti lineari in dotazione.
Integrated driver. Designed to create an “L” (90°) joint between two fittings. Linear joints included.
SEAMLESSNEW
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Plexiform 6101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
MINIVEGAAccessori Accessories
Kit giunto lineare a scomparsa In lamiera di acciaio zincata, fissaggio con viti. Permette di realizzare una giunzione “invisibile” di due corpi in linea.
Invisible linear joint kitGalvanized steel, fixed with screws. Allows the creation of an “invisible” joint between two linear fittings.
SV880 15,5x36x4,5
Giunto angolare cieco In estruso di alluminio, verniciato, fissaggio con viti. Permette di realizzare una giunzione a “L” (90°) tra due corpi. Giunti lineari in dotazione.
90° blank angle jointExtruded aluminium, powder coated, screw fixing. Designed to create an “L” (90°) joint between two fittings. Linear joints included.
MV809XX 135x135x50
50
135 135
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit Testate terminali verniciate Coppia di testate in pressofusione di alluminio, verniciate. Fissaggio ad innesto con viti. Da usare su moduli singoli o sugli ultimi della linea.
Powder coated end caps kit Pair of end caps in die-cast aluminium, powder coated. Clip on fixture with screws. To be used on single modules or on the last modules of the line.
Kit attacco a soffittoIn lamiera verniciata, fissaggio con viti. Permette di fissare i corpi direttamente a soffitto.
Ceiling connection kitPowder coated steel sheet fixed with screws. Allows the fitting to be installed directly on the ceiling.
MV801XX 50x100x5
MV805XX 20x20x3224x20x17
50100
5
Schermo diffusore opale In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
Opal diffuser Internally splined self-extinguishing polycarbonate, snap on fixture. Reduce dazzle and creates an IP40 degree protection of the fitting.
1732
24
20 20
4,5
3615,5
Kit sospensione Coppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile. Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kit Pair of chromed brass ceiling roses, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Allows adjustable installation height of the suspension. For simple and electrified ceiling roses go to page 336-337.
MV806 Ø16x44
44
Ø 16
2
52
540-1080-1620
MV802 540 mm - 12WMV803 1080 mm - 24WMV804 1620 mm - 36W
62 Plexiform
TRADO
Apparecchio con illuminazione a LED, per interni ad emissione diretta.Installazione a soffitto o sospensione.Corpo in lamiera di acciaio, verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra ≥80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni speciali.
LED fitting for indoor use, direct light.Ceiling or suspension mounted.Sheet steel body, epoxy powder coating, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W, Ra ≥80, beam angle 120° in CCT 3000K and CCT 4000K versions.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards, EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies to RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours.
SoffittoCeiling
SospensioneSuspension
UGR<19NEW
Plexiform 63
TRADO
CORPO ILLUMINANTELIGHTING FITTING
KIT ATTACCO A SOFFITTO IN DOTAZIONECEILING CONNECTION KIT INCLUDED
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
SCHERMO DIFFUSOREDIFFUSER
KIT SOSPENSIONESUSPENSION KIT
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Vega FLUO T8 72W 295
Trado LED 40W 312
100%consumo
consumption
EnergySaving
44%
56%consumo
100
10
20
30
40
50
60
70
80
90
Vega Fluo T872W
Trado LED40W
UGR<19
64 Plexiform
TRADO
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso- Kit attacco a soffitto in dotazione. Se si necessita di sospensione
ordinarla a parte
SINGLE MOUNTING All fittings must be completed with:- Diffusers or antireflection optics- Ceiling connection kits included. If suspended order suspension
accessories separately
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
ESEMPIO D’ORDINE EXAMPLE OF ORDER
TR10301
SV875
SV926
Per realizzare 1 TRADO 40W di colore nero a sospensione occorrono:To make 1 suspension TRADO 40W black colour you require:
TRADO 40W luce diretta 1 pezziTRADO 40W direct light pieces
Schermi diffusori 1 pezziDiffusers pieces
Kit sospensione 1 pezziSuspensions kit pieces
Versione con ottica antiriflesso UGR<19Version with antireflection optic UGR<19
Schermo diffusore
Diffuser
50
215
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 6501 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
TRADO
ACCESSORI - ACCESSORIES
Compreso di kit attacco a soffitto. Se si necessita di sospensione ordinarla a parte.
Ceiling connection kit included. If suspended order suspension accessories separately.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TR101XX 20W 2500 lm 3000K 574x215x50 2,0 kg
TR102XX 20W 2500 lm 4000K 574x215x50 2,0 kg
TR103XX 40W 5000 lm 3000K 1114x215x50 3,3 kg
TR104XX 40W 5000 lm 4000K 1114x215x50 3,3 kg
TR105XX 60W 7500 lm 3000K 1654x215x50 4,6 kg
TR106XX 60W 7500 lm 4000K 1654x215x50 4,6 kg
LED A LUCE DIRETTA - DIRECT LIGHT LED
IP20 IK05
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
Ottica antiriflesso UGR<19Lamellare in alluminio satinato, antiriflesso. Fissaggio a scatto. Adatta per uffici con videoterminali.
Antireflection optic UGR<19 Laminated matt antiglare aluminium. Snap on fixture. Suitable for offices with VDU’s.
TR801 540 mm - 20WTR802 1080 mm - 40WTR803 1620 mm - 60W
Schermo diffusore opale In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
Opal diffuser Internally splined self-extinguishing polycarbonate, snap on fixture. Reduce dazzle.
2
130
540-1080-1620
SV874 540 mm - 20WSV875 1080 mm - 40WSV876 1620 mm - 60W
Kit sospensione Coppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile. Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kit Pair of chromed brass ceiling roses, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Allows adjustable installation height of the suspension. For simple and electrified ceiling roses go to page 336-337.
SV926 Ø16x44 Ø 16
44
126
45
NEW
66 Plexiform
Apparecchio con illuminazione a LED, per interni ad emissione diretta.Installazione a sospensione.Corpo in lamiera di acciaio, verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, in remoto.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra ≥80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni speciali.
LED fitting for indoor use, direct light.Suspension mounted.Sheet steel body, epoxy powder coating, resistant to damp environments and UV-ray stabilized.Supplied with remote electronic driver.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W, Ra ≥80, beam angle 120° in CCT 3000K and CCT 4000K versions.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards, EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies to RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours.
ONDASospensioneSuspension
UGR<19NEW
Plexiform 67
ONDA
KIT SOSPENSIONE ELETTRIFICATA COMPRESA
ELECTRIFIED SUSPENSION KIT INCLUDED
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Vega FLUO T8 72W 295
Onda LED 36W 290
CORPO ILLUMINANTELIGHTING FITTING
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
SCHERMO DIFFUSOREDIFFUSER
100%consumo
consumption
EnergySaving
50%
50%consumo
consumption
100
10
20
30
40
50
60
70
80
90
Vega Fluo T872W
Onda LED36W
UGR<19
68 Plexiform
ONDA
95-145
34
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso
Kit sospensione elettrificata e rosone sono inclusi.
SINGLE MOUNTING All fittings must be completed with:- Diffusers or antireflection optics
Electrified suspension kit and ceiling rose are included.
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
ESEMPIO D’ORDINE EXAMPLE OF ORDER
ON10301
SV872
Per realizzare 1 ONDA 36W di colore nero occorrono:To make 1 ONDA 36W black colour you require:
ONDA 36W luce diretta 1 pezziONDA 36W direct light pieces
Schermi diffusori 1 pezziDiffusers pieces
Ottica antiriflesso
Antireflection optic
Versione con schermo diffusoreVersion with diffuser
Plexiform 6901 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
ONDA
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
ON101XX 18W 2000 lm 3000K 560x95x34 1,2 kg
ON102XX 18W 2000 lm 4000K 560x95x34 1,2 kg
ON103XX 36W 4000 lm 3000K 1100x95x34 2,0 kg
ON104XX 36W 4000 lm 4000K 1100x95x34 2,0 kg
ON105XX 54W 6000 lm 3000K 1640x95x34 2,8 kg
ON106XX 54W 6000 lm 4000K 1640x95x34 2,8 kg
ON111XX 20W 2500 lm 3000K 560x145x34 1,6 kg
ON112XX 20W 2500 lm 4000K 560x145x34 1,6 kg
ON113XX 40W 5000 lm 3000K 1100x145x34 2,8 kg
ON114XX 40W 5000 lm 4000K 1100x145x34 2,8 kg
ON115XX 60W 7500 lm 3000K 1640x145x34 4,0 kg
ON116XX 60W 7500 lm 4000K 1640x145x34 4,0 kg
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
ACCESSORI - ACCESSORIES
Schermo diffusore opale In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
Opal diffuserInternally splined self-extinguishing polycarbonate, snap on fixture. Reduce dazzle.
90
90
180
270
360
450
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
IP20 IK05
Alimentatore in remoto.Apparecchio compreso di kit sospensione elettrificata e rosone.
Remote driver. Electrified suspension kit and ceiling rose included.
Alimentatore in remoto.Apparecchio compreso di kit sospensione elettrificata e rosone .
Remote driver. Electrified suspension kit and ceiling rose included.
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
IP20 IK05
SV871 540x82x2 - 18WSV872 1080x82x2 - 36WSV873 1620x82x2 - 54W
SV874 540x130x2 - 20WSV875 1080x130x2 - 40WSV876 1620x130x2 - 60W
2
82/130
540-1080-1620
Ottica antiriflesso UGR<19Lamellare in alluminio satinato, antiriflesso. Fissaggio a scatto. Adatta per uffici con videoterminali.
Antireflection optic UGR<19 Laminated matt antiglare aluminium. Snap on fixture. Suitable for offices with VDU’s.
SV930 540x82x30 - 18WSV931 1080x82x30 - 36WSV932 1620x82x30 - 54W
SV933 540x130x30 - 20WSV934 1080x130x30 - 40WSV935 1620x130x30 - 60W
82/130
30
SOSPENSIONE LED A LUCE DIRETTA - DIRECT LIGHT LED SUSPENSION NEW
70 Plexiform
Apparecchio con illuminazione a LED, per interni ad emissione diretta.Installazione a soffitto o sospensione.Corpo in lamiera di acciaio, verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra ≥80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni speciali.
LED fitting for indoor use, direct light.Ceiling or suspension mounted.Sheet steel body, epoxy powder coating, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W, Ra ≥80, beam angle 120° in CCT 3000K and CCT 4000K versions.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards, EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies to RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours.
LINGOTTOSoffittoCeiling
SospensioneSuspension
UGR<19NEW
Plexiform 71
LINGOTTO
CORPO ILLUMINANTELIGHTING FITTING
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
SCHERMO DIFFUSOREDIFFUSER
KIT SOSPENSIONESUSPENSION KIT
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Vega FLUO T8 72W 295
Lingotto LED 40W 312
100%consumo
consumption
56%consumo
consumption
100
10
20
30
40
50
60
70
80
90
Vega Fluo T872W
Lingotto LED40W
EnergySaving
44%
UGR<19
KIT ATTACCO A SOFFITTO IN DOTAZIONECEILING CONNECTION KIT INCLUDED
72 Plexiform
LINGOTTO
130-180
35
Versione con ottica antiriflesso UGR<19Version with antireflection optic UGR<19
Schermo diffusore
Diffuser
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
LG10301
SV872
SV926
Per realizzare 1 LINGOTTO 36W di colore nero occorrono:To make 1 LINGOTTO 36W black colour you require:
LINGOTTO 36W luce diretta 1 pezziLINGOTTO 36W direct light pieces
Schermi diffusori 1 pezziDiffusers pieces
Kit sospensione 1 pezziSuspensions kit pieces
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso- Kit attacco a soffitto in dotazione. Se si necessita di sospensione
ordinarla a parte
SINGLE MOUNTING All fittings must be completed with:- Diffusers or antireflection optics- Ceiling connection kits included. If suspended order suspension accessories separately
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 7301 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
LINGOTTO
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
LG101XX 18W 2000 lm 3000K 590x130x35 1,4 kg
LG102XX 18W 2000 lm 4000K 590x130x35 1,4 kg
LG103XX 36W 4000 lm 3000K 1130x130x35 2,2 kg
LG104XX 36W 4000 lm 4000K 1130x130x35 2,2 kg
LG105XX 54W 6000 lm 3000K 1670x130x35 3,0 kg
LG106XX 54W 6000 lm 4000K 1670x130x35 3,0 kg
LG111XX 20W 2500 lm 3000K 590x180x35 1,8 kg
LG112XX 20W 2500 lm 4000K 590x180x35 1,8 kg
LG113XX 40W 5000 lm 3000K 1130x180x35 3,0 kg
LG114XX 40W 5000 lm 4000K 1130x180x35 3,0 kg
LG115XX 60W 7500 lm 3000K 1670x180x35 4,2 kg
LG116XX 60W 7500 lm 4000K 1670x180x35 4,2 kg
LED A LUCE DIRETTA - DIRECT LIGHT LED
Compreso di kit attacco a soffitto. Se si necessita di sospensione, ordinarla a parte.
Ceiling connection kit included. If suspended order suspension accessories separately.
Compreso di kit attacco a soffitto. Se si necessita di sospensione, ordinarla a parte.
Ceiling connection kit included. If suspended order suspension accessories separately.
IP20 IK05
IP20 IK05
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
ACCESSORI - ACCESSORIES
90
90
180
270
360
450
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
Schermo diffusore opale In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
Opal diffuserInternally splined self-extinguishing polycarbonate, snap on fixture. Reduce dazzle.
SV871 540x82x2 - 18WSV872 1080x82x2 - 36WSV873 1620x82x2 - 54W
SV874 540x130x2 - 20WSV875 1080x130x2 - 40WSV876 1620x130x2 - 60W
2
82/130
540-1080-1620
Ottica antiriflesso UGR<19Lamellare in alluminio satinato, antiriflesso. Fissaggio a scatto. Adatta per uffici con videoterminali.
Antireflection optic UGR<19 Laminated matt antiglare aluminium. Snap on fixture. Suitable for offices with VDU’s.
SV930 540x82x30 - 18WSV931 1080x82x30 - 36WSV932 1620x82x30 - 54W
SV933 540x130x30 - 20WSV934 1080x130x30 - 40WSV935 1620x130x30 - 60W
82/130
30
Kit sospensione Coppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile. Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kit Pair of chromed brass ceiling roses, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Allows adjustable installation height of the suspension. For simple and electrified ceiling roses go to page 336-337.
SV926 Ø16x44 Ø 16
44
NEW
74 Plexiform
Apparecchio con illuminazione a LED, per interni ad emissione diretta.Installazione a sospensione.Corpo in lamiera di acciaio, verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, in remoto.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra ≥80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni speciali.
LED fitting for indoor use, direct light.Suspension mounted.Sheet steel body, epoxy powder coating, resistant to damp environments and UV-ray stabilized.Supplied with remote electronic driver.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W, Ra ≥80, beam angle 120° in CCT 3000K and CCT 4000K versions.Product complies with current EN 60598 electric safety standards, EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies to RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours.
LAMINASospensioneSuspension
NEW
Plexiform 75
LAMINA
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Vega FLUO T8 72W 295
Lamina LED 36W 290
100%consumo
consumption
50%consumo
consumption
CORPO ILLUMINANTELIGHTING FITTING
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
SCHERMO DIFFUSOREDIFFUSER
100
10
20
30
40
50
60
70
80
90
Vega Fluo T872W
Lamina LED36W
EnergySaving
50%
KIT SOSPENSIONE ELETTRIFICATA COMPRESA
ELECTRIFIED SUSPENSION KIT INCLUDED
76 Plexiform
LAMINA
25
100-150
Versione con schermo diffusoreVersion with diffuser
Ottica antiriflesso
Antireflection optic
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
ESEMPIO D’ORDINE EXAMPLE OF ORDER
LM10301
SV872
Per realizzare 1 LAMINA 36W di colore nero occorrono:To make 1 LAMINA 36W black colour you require:
LAMINA 36W luce diretta 1 pezziLAMNINA 36W direct light pieces
Schermi diffusori 1 pezziDiffusers pieces
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o ottiche antiriflesso
Kit sospensione elettrificata e rosone sono inclusi.
SINGLE MOUNTING All fittings must be completed with:- Diffusers or antireflection optics
Electrified suspension kit and ceiling rose are included.
Plexiform 7701 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
LAMINA
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
LM101XX 18W 2000 lm 3000K 560x100x25 1,3 kg
LM102XX 18W 2000 lm 4000K 560x100x25 1,3 kg
LM103XX 36W 4000 lm 3000K 1100x100x25 2,1 kg
LM104XX 36W 4000 lm 4000K 1100x100x25 2,1 kg
LM105XX 54W 6000 lm 3000K 1640x100x25 2,9 kg
LM106XX 54W 6000 lm 4000K 1640x100x25 2,9 kg
LM111XX 20W 2500 lm 3000K 560x150x25 1,7kg
LM112XX 20W 2500 lm 4000K 560x150x25 1,7kg
LM113XX 40W 5000 lm 3000K 1100x150x25 2,9 kg
LM114XX 40W 5000 lm 4000K 1100x150x25 2,9 kg
LM115XX 60W 7500 lm 3000K 1640x150x25 4,1 kg
LM116XX 60W 7500 lm 4000K 1640x150x25 4,1 kg
SOSPENSIONE LED A LUCE DIRETTA - DIRECT LIGHT LED SUSPENSION
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
ACCESSORI - ACCESSORIES
Schermo diffusore opale In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
Opal diffuserInternally splined self-extinguishing polycarbonate, snap on fixture. Reduce dazzle.
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
90
90
180
270
360
450
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
Ottica antiriflessoLamellare in alluminio satinato, antiriflesso. Fissaggio a scatto.
Antireflection optic Laminated matt antiglare aluminium. Snap on fixture.
LM801 540X82x20 - 18WLM802 1080X82x20 - 36WLM803 1620X82x20 - 54W
LM804 540X130x20 - 20WLM805 1080X130x20 - 40WLM806 1620X130x20 - 60W
2
82/130
540-1080-1620
SV871 540x82x2 - 18WSV872 1080x82x2 - 36WSV873 1620x82x2 - 54W
SV874 540x130x2 - 20WSV875 1080x130x2 - 40WSV876 1620x130x2 - 60W
82/130
20
NEW
IP20 IK05
Alimentatore in remoto.Apparecchio compreso di kit sospensione elettrificata e rosone.
Remote driver. Electrified suspension kit and ceiling rose included.
Alimentatore in remoto.Apparecchio compreso di kit sospensione elettrificata e rosone .
Remote driver. Electrified suspension kit and ceiling rose included.
IP20 IK05
78 Plexiform
Apparecchio con illuminazione a LED, per interni ad emissione diretta.Installazione ad incasso per pannelli con struttura a vista (600x600), cartongesso, soffitto o sospensione.Corpo in lamiera di acciaio, spessore 0,8 mm.Disponibile senza diffusore o con diffusore in vetro bianco latte, verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico. Versioni con LED di potenza e LED di bassa potenza.I LED di potenza da noi utilizzati, SEOUL Z5 Moster, sono alimentati in corrente costante con una resa di 140 lm/W Ra ≥90, apertura 115°, nelle versioni CCT 3000K e 4000K.I LED di bassa potenza da noi utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 110 lm/W Ra ≥80, apertura 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta: Reattore elettronico dimmerabile o DALI. Colorazioni speciali.
LED fitting for indoor use, direct light.600x600 mm modular false ceiling, recessed, ceiling or suspension mounted.Sheet steel body, 0,8 mm thickness.Available with or without diffuser in pure white glass, baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized. Supplied with electronic driver. Power and low power LED versions.Our high power LED, SEOUL Z5 Moster, are powered by constant current drivers, efficiency 140 lm/W, Ra ≥90, beam angle 115° in CCT 3000K and 4000K versions.Our low power LED, series 5630, are powered by constant current drivers, efficiency 110 lm/W, Ra ≥80, beam angle 120° in CCT 3000K and CCT 4000K versions.Product complies with current EN 60598 electric safety standards, EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies to RoHS standards.
On request: Wiring with dimmable or DALI driver. Bespoke colours.
CIELOSoffittoCeiling
SospensioneSuspension
IncassoRecessed
NEW
Plexiform 79
CIELO
CORPO ILLUMINANTE CON LED DI POTENZA
HIGH POWER LED LIGHTING FITTING
CORPO ILLUMINANTE CON LEDDI BASSA POTENZA E VETRO DIFFUSORE
LOW POWER LED LIGHTING FITTINGWITH GLASS DIFFUSER
CORPO ILLUMINANTE CON LEDDI POTENZA E VETRO DIFFUSORE
HIGH POWER LED LIGHTING FITTINGWITH GLASS DIFFUSER
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Roma FLUO SDP T5 96W 310
Cielo LED 48W 580
100%consumo
consumption
EnergySaving
50%
50%consumo
consumption
100
10
20
30
40
50
60
70
80
90
Roma Fluo SDP T596W
Cielo LED48W
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
80 Plexiform
CIELO
IP20 IK05
Compreso di diffusore in vetro bianco latte. Attacco a plafone ordinabile separatamente.
Milky white glass diffuser included. Ceiling connection to be ordered separately.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
CI113XX 48W 5500 lm 3000K 595x595x60 3,4 kg
CI114XX 48W 5500 lm 4000K 595x595x60 3,4 kg
INCASSO LED DI POTENZA (PANNELLI 600X600 MM) A LUCE DIRETTA CON VETRO DIFFUSOREHIGH POWER DIRECT LIGHT LED FOR 600X600 MM MODULAR INSTALLATION WITH GLASS DIFFUSER
150
150
300
450
600
750
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
IP20 IK05
Compreso di diffusore in vetro bianco latte e kit sospensione.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Milky white glass diffuser and suspension kit included.For simple and electrified ceiling rose go to page 336-337.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
CI111XX 48W 5500 lm 3000K 595x595x60 3,5 kg
CI112XX 48W 5500 lm 4000K 595x595x60 3,5 kg
SOSPENSIONE LED DI POTENZA A LUCE DIRETTA CON VETRO DIFFUSOREHIGH POWER DIRECT LIGHT LED SUSPENSION WITH GLASS DIFFUSER
150
150
300
450
600
750
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
60
360
595
40
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
NEW
NEW
Plexiform 8101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
CIELO
IP20 IK05
Compreso di diffusore in vetro bianco latte e kit sospensione.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Milky white glass diffuser and suspension kit included.For simple and electrified ceiling rose go to page 336-337.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
CI121XX 25W 2800 lm 3000K 595x595x60 3,2 kg
CI122XX 25W 2800 lm 4000K 595x595x60 3,2 kg
SOSPENSIONE LED DI BASSA POTENZA A LUCE DIRETTA CON VETRO DIFFUSORELOW POWER DIRECT LIGHT LED SUSPENSION WITH GLASS DIFFUSER
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
Compreso di diffusore in vetro bianco latte. Attacco a plafone ordinabile separatamente.
Milky white glass diffuser included. Ceiling connection to be ordered separately.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
CI123XX 25W 2800 lm 3000K 595x595x60 3,1 kg
CI124XX 25W 2800 lm 4000K 595x595x60 3,1 kg
INCASSO LED DI BASSA POTENZA (PANNELLI 600X600 MM) A LUCE DIRETTA CON VETRO DIFFUSORELOW POWER DIRECT LIGHT LED FOR 600X600 MM MODULAR INSTALLATION WITH GLASS DIFFUSER
IP20 IK05
80
80
160
240
320
400
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
60
360
595
40
NEW
NEW
82 Plexiform
CIELO
IP20 IK05
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
CI103XX 48W 5500 lm 3000K 595x595x40 2,9 kg
CI104XX 48W 5500 lm 4000K 595x595x40 2,9 kg
INCASSO LED DI POTENZA A LUCE DIRETTA PER PANNELLI 600X600 MMHIGH POWER DIRECT LIGHT LED FOR 600X600 MM MODULAR INSTALLATIONS
Attacco a plafone ordinabile separatamente.
Ceiling connection to be ordered separately.
150
150
300
450
600
750
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
CI101XX 48W 5500 lm 3000K 595x595x40 3,0 kg
CI102XX 48W 5500 lm 4000K 595x595x40 3,0 kg
SOSPENSIONE A LED DI POTENZA A LUCE DIRETTA - HIGH POWER LED SUSPENSION DIRECT LIGHT
IP20 IK05
Compreso di kit sospensione.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kit included.For simple and electrified ceiling rose go to page 336-337.
150
150
300
450
600
750
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
40
595
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
NEW
NEW
Plexiform 8301 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
CIELOAccessori Accessories
Kit attacco a soffitto Coppia di “L” in lamiera di acciao zincata.
Ceiling connection kit“L” pair in galvanized steel.
CI801 400x40x30
30
40
400
Telaio per installazione in cartongessoPermette l’installazione dell’apparecchio nel cartongesso. Solo per corpi di dimensioni 595x595 mm ad incasso.
Frame for recessed installationAllows the fitting to be recessed in plasterboard ceiling. Only for 595x595 mm recessed fittings.
SV925 622x622
622
622
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
84 Plexiform
Apparecchio con illuminazione a LED, per interni ad emissione diretta.Installazione a soffitto o sospensione.Corpo in lamiera di acciaio, spessore 2,5 mm. Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.I LED di potenza da noi utilizzati, SEOUL Z5 Moster, sono alimentati in corrente costante con una resa di 140 lm/W, Ra ≥90, apertura 115°, nelle versioni CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta: Reattore elettronico dimmerabile o DALI. Colorazioni speciali.
LED fitting for indoor use, direct light.Ceiling or suspension mounted.Sheet steel body, 2,5 mm thickness. Epoxy powder coating, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver.Our power LED, SEOUL Z5 Moster, are powered by constant current drivers, efficiency 140 lm/W, Ra ≥90, beam angle 115° in CCT 3000K and 4000K versions. Product complies with current EN 60598 electric safety standards, EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies to RoHS standards.
On request: Wiring with dimmable or DALI driver. Bespoke colours.
FOLIOSoffittoCeiling
SospensioneSuspension
NEW
Plexiform 85
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Roma FLUO SDP T5 96W 310
Folio LED 48W 580
100%consumo
consumption
EnergySaving
50%
50%consumo
consumption
100
Sostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO04 = CROMO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY04 = CHROME
COLORI COLOURS
10
20
30
40
50
60
70
80
90
Roma Fluo SDP T596W
Folio LED48W
86 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey 04 cromo chrome
FOLIO
Compreso di kit sospensione elettrificata.
Electrified suspension kit included.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
FL101XX 48W 5500 lm 3000K 540x540x12 6,6 kg
FL102XX 48W 5500 lm 4000K 540x540x12 6,6 kg
FL105XX 48W 5500 lm 3000K 900x360x12 7,4 kg
FL106XX 48W 5500 lm 4000K 900x360x12 7,4 kg
SOSPENSIONE A LED A LUCE DIRETTA - LED SUSPENSION DIRECT LIGHT
IP20 IK06
150
150
300
450
600
750
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
NEW
DETTAGLIO FINITURA NERA E PARABOLA CON APERTURA FASCIO A 45°.MATT BLACK FINISHING AND BEAM ANGLE 45° DETAILS..
12
360-540
Plexiform 8701 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey 04 cromo chrome
FOLIO
Compreso di attacco a plafone.
Ceiling connections included.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
FL111XX 48W 5500 lm 3000K 540x540x12 7,3 kg
FL112XX 48W 5500 lm 4000K 540x540x12 7,3 kg
FL115XX 48W 5500 lm 3000K 900x360x12 7,8 kg
FL116XX 48W 5500 lm 4000K 900x360x12 7,8 kg
PLAFONIERA A LED A LUCE DIRETTA - LED CEILING DIRECT LIGHT
IP20 IK06
150
150
300
450
600
750
0° 15°15° 30°30°
45°45°
60°60°
75°75°
90°90°
105°105°
120°180°
cd/klm
Angoli Gamma
NEW
12
360-540
88 Plexiform
TRIADE
Apparecchio con illuminazione a LED per interni, ad emissione diretta.Installazione a plafone, a sospensione, ad incasso per controsoffitti con struttura a vista (a T rovesciata) o ad incasso per cartongesso (solo versione 600x600 mm). Corpo in lamiera di acciaio.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Ottiche paraboliche in alluminio anodizzato.Diffusore prismatizzato tra l’ottica ed il LED.Alimentazione con reattore elettronico.I LED utilizzati sono alimentati in corrente costante con una resa di 115 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Il corpo illuminante ottiene un UGR <16, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.
LED fitting for indoor use, direct light.Ceiling, suspension, recessed for false ceiling with exposed structure (upside-down T) or for plaster ceiling (only 600x600 mm version) installations.Sheet steel body.Baked with epoxy powder coatings, resistant to damp enviroments and UV-ray stabilized.Antireflection anodized aluminium optic.Prismatized diffuser between LED and optic.Supplied with electronic driver.Our LED are powered by constant current drivers, efficiency 115 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.The fitting attains UGR <16 and can be used with VDU’s. Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and following amendments.Product complies to RoHS standards.
On request:Wiring with dimmable or DALI driver.
SoffittoCeiling
SospensioneSuspension
IncassoRecessed
UGR<16NEW
Plexiform 89
TRIADE
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Roma SDP T5 96W 310
Triade LED 40W 462 10
20
30
40
50
60
70
80
90
100
Roma SDP T596W
100%consumo
consumption
Triade LED40W
EnergySaving
58%
42%consumo
consumption
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
90 Plexiform
TRIADE
UGR<16NEW
41
596
596
Per l’installazione in cartongesso utilizzare il telaio nella sezione accessori.
For recessed installation use the frame in the accessories section.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TD103 27W 3060 lm 3000K 596x596x41 3,9 kg
TD104 27W 3060 lm 4000K 596x596x41 3,9 kg
INCASSO LED A LUCE DIRETTA PER STRUTTURA A “T” ROVESCIATADIRECT LIGHT LED RECESSED FOR FALSE CEILING WITH EXPOSED STRUCTURE
150
150
300
450
600
750
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
596mm x 596mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 4600.00 lm
Massimo 502.36 cd/klm
Posizione C=0.00 G=14.00
Rendimento: 79.52%
Data: 24-03-2014
Doppia Simmetria
Codice Code
Dimensioni mmDimensions mm
ACCESSORI - ACCESSORIESDescrizione AccessoriDescription Accessories
Telaio per installazione in cartongessoPermette l’installazione dell’apparecchio nel cartongesso. Solo per corpi di dimensioni 596 x 596 mm e del tipo ad incasso.
Frame for recessed installationAllows the fitting to be recessed in plasterboard ceiling. Only for 596x596 mm recessed fittings.
SV925 622x622
622
622
UGR<16NEW
Compresa di kit sospensione.
Supplied with suspension kit.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TD113 27W 3060 lm 3000K 596x596x41 3,9 kg
TD114 27W 3060 lm 4000K 596x596x41 3,9 kg
SOSPENSIONE LED A LUCE DIRETTA – DIRECT LIGHT LED SUSPENSION
150
150
300
450
600
750
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1196mm x 296mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3060.00 lm
Massimo 502.52 cd/klm
Posizione C=90.00 G=16.00
Rendimento: 83.71%
Data: 15-04-2014
Doppia Simmetria
IP40 IK05
UGR<16NEW
Compresa di kit attacco a soffitto.
Supplied with ceiling connection kit.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TD123 27W 3060 lm 3000K 596x596x45 4,0 kg
TD124 27W 3060 lm 4000K 596x596x45 4,0 kg
PLAFONIERA LED A LUCE DIRETTA - DIRECT LIGHT LED CEILING MOUNTED
150
150
300
450
600
750
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
596mm x 596mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3060.00 lm
Massimo 504.98 cd/klm
Posizione C=60.00 G=25.00
Rendimento: 81.93%
Data: 14-04-2014
Doppia Simmetria
IP40 IK05
IP40 IK05
7
45
Plexiform 91
TRIADE
4145
Codice Code
Dimensioni mmDimensions mm
ACCESSORI - ACCESSORIESDescrizione AccessoriDescription Accessories
Telaio per installazione in cartongessoPermette l’installazione dell’apparecchio nel cartongesso. Solo per corpi di dimensioni 596 x 596 mm e del tipo ad incasso.
Frame for recessed installationAllows the fitting to be recessed in plasterboard ceiling. Only for 596x596 mm recessed fittings.
SV925 622x622
622
622
7
596
596
Compresa di kit sospensione.
Supplied with suspension kit.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TD111 40W 4600 lm 3000K 596x596x41 4,8 kg
TD112 40W 4600 lm 4000K 596x596x41 4,8 kg
SOSPENSIONE LED A LUCE DIRETTA – DIRECT LIGHT LED SUSPENSION
IP40 IK05
150
150
300
450
600
750
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1196mm x 296mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3060.00 lm
Massimo 502.52 cd/klm
Posizione C=90.00 G=16.00
Rendimento: 83.71%
Data: 15-04-2014
Doppia Simmetria
UGR<16NEW
IP40 IK05
Compresa di kit attacco a soffitto.
Supplied with ceiling connection kit.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TD121 40W 4600 lm 3000K 596x596x45 4,9 kg
TD122 40W 4600 lm 4000K 596x596x45 4,9 kg
PLAFONIERA LED A LUCE DIRETTA - DIRECT LIGHT LED CEILING MOUNTED
150
150
300
450
600
750
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
596mm x 596mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3060.00 lm
Massimo 504.98 cd/klm
Posizione C=60.00 G=25.00
Rendimento: 81.93%
Data: 14-04-2014
Doppia Simmetria
UGR<16NEW
Per l’installazione in cartongesso utilizzare il telaio nella sezione accessori.
For recessed installation use the frame in the accessories section.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TD101 40W 4600 lm 3000K 596x596x41 4,8 kg
TD102 40W 4600 lm 4000K 596x596x41 4,8 kg
INCASSO LED A LUCE DIRETTA PER STRUTTURA A “T” ROVESCIATADIRECT LIGHT LED RECESSED FOR FALSE CEILING WITH EXPOSED STRUCTURE
IP40 IK05
150
150
300
450
600
750
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
596mm x 596mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 4600.00 lm
Massimo 502.36 cd/klm
Posizione C=0.00 G=14.00
Rendimento: 79.52%
Data: 24-03-2014
Doppia Simmetria
UGR<16NEW
92 Plexiform
TRIADE
7
300
300
Compresa di kit sospensione.
Supplied with suspension kit.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TD115 27W 3060 lm 3000K 300x1200x41 3,9 kg
TD116 27W 3060 lm 4000K 300x1200x41 3,9 kg
SOSPENSIONE LED A LUCE DIRETTA – DIRECT LIGHT LED SUSPENSION
IP40 IK05
150
150
300
450
600
750
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1196mm x 296mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3060.00 lm
Massimo 502.52 cd/klm
Posizione C=90.00 G=16.00
Rendimento: 83.71%
Data: 15-04-2014
Doppia Simmetria
UGR<16NEW
IP40 IK05
Compresa di kit attacco a soffitto.
Supplied with ceiling connection kit.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TD125 27W 3060 lm 3000K 300x1200x45 4,0 kg
TD126 27W 3060 lm 4000K 300x1200x45 4,0 kg
PLAFONIERA LED A LUCE DIRETTA - DIRECT LIGHT LED CEILING MOUNTED
150
150
300
450
600
750
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
596mm x 596mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3060.00 lm
Massimo 504.98 cd/klm
Posizione C=60.00 G=25.00
Rendimento: 81.93%
Data: 14-04-2014
Doppia Simmetria
UGR<16NEW
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TD105 27W 3060 lm 3000K 300x1200x41 3,9 kg
TD106 27W 3060 lm 4000K 300x1200x41 3,9 kg
INCASSO LED A LUCE DIRETTA PER STRUTTURA A “T” ROVESCIATADIRECT LIGHT LED RECESSED FOR FALSE CEILING WITH EXPOSED STRUCTURE
IP40 IK05150
150
300
450
600
750
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
596mm x 596mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 4600.00 lm
Massimo 502.36 cd/klm
Posizione C=0.00 G=14.00
Rendimento: 79.52%
Data: 24-03-2014
Doppia Simmetria
UGR<16NEW
4145
Plexiform 93
TRIADE
94 Plexiform
FUTURA
Apparecchio con illuminazione a LED per interni, ad emissionie diretta.Installazione ad incasso per pannelli con struttura a vista (600x600 mm), cartongesso, a soffitto o a sospensione.Corpo in estruso di alluminio, colore bianco.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Schermo diffusore in metilmetacrilato.Alimentazione con reattore elettronico.I LED utilizzati sono alimentati in corrente costante Ra≥ 80, CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
LED fitting for indoor use, direct light.600x600 mm modular false ceiling, recessed, ceiling or suspension mounted.Extruded aluminium body, white finish.Baked with epoxy powder coatings, resistant to damp enviroments and UV-ray stabilized.Diffuser in methyl methacrylate.Supplied with electronic driver.Our LED are powered by constant current drivers Ra≥80, CCT 3000K and 4000k.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies to RoHS standards.
SoffittoCeiling
SospensioneSuspension
IncassoRecessed
NEW
Plexiform 95
FUTURA
10
596
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Finestra FLUO T5 96W 200
Futura LED 36W 234 10
20
30
40
50
60
70
80
90
100
Finestra FLUO T596W
100%consumo
consumption
Futura LED36W
EnergySaving
63%
37%consumo
consumption
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
96 Plexiform
FUTURALED A LUCE DIRETTA SINGOLO - DIRECT LIGHT LED SINGLE
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
FU101 36W 3100 lm 3000K 596x596x10 3,8 kg
FU102 36W 3100 lm 4000K 596x596x10 3,8 kg
F IP40 IK0580
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
595mm x 595mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3063.20 lm
Massimo 354.00 cd/klm
Posizione C=0.00 G=1.00
Rendimento: 99.65%
Data: 01-01-1998
Asimmetrico
NEW
Kit attacco a soffitto In lamiera verniciata, fissaggio a vite.
Ceiling connection kit Coated steel sheet, fixed with screws.
FU802
FU801 Ø16x44
Codice Code
Dimensioni mmDimensions mm
ACCESSORI - ACCESSORIESDescrizione AccessoriDescription Accessories
Telaio per installazione in cartongessoPermette l’installazione dell’apparecchio nel cartongesso.
Frame for recessed installationMake possible to use the fitting recessed in plasterboard ceiling.
SV925 622x622
622
622
Kit sospensione archettoDue funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Arc suspension kitPair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
44
Ø 16
Kit attacco a soffittoIn lamiera verniciata, colore bianco, con cornice coprente.
Ceiling connection kitCoated steel sheet, white coloured, with covering frame.
FU803 596x596X44
596
44
596
Plexiform 97
FUTURA
98 Plexiform
Apparecchio con illuminazione a LED per interni, ad emissione diretta.Installazione ad incasso per pannelli con struttura a vista (600x600 mm), cartongesso o a soffitto.Corpo in lamiera di acciaio, colore bianco. Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 120 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.
LED fitting for indoor use, direct light.600x600 mm modular false ceiling, plaster ceiling or ceiling mounted.Sheet steel body, white coloured. Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver.Our LED, series 5630, are powered by constant current drivers, efficiency 120 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request: Wiring with dimmable or DALI driver.
AMALFISoffittoCeiling
IncassoRecessed
NEW
Plexiform 99
50
595
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Roma SDP T5 96W 310
Amalfi LED 50W 438
100100%consumo
consumption
EnergySaving
48%
52%consumo
consumption
10
20
30
40
50
60
70
80
90
Roma SDP T596W
Amalfi LED50W
AMALFI
100 Plexiform
AMALFIAccessori Accessories
SV925 622x622
Codice Code
Dimensioni mmDimensions mm
ACCESSORI - ACCESSORIESDescrizione AccessoriDescription Accessories
Telaio per installazione in cartongessoPermette l’installazione dell’apparecchio nel cartongesso. Solo per corpi di dimensioni 596 x 596 mm e del tipo ad incasso.
Frame for recessed installationAllows the fitting to be recessed in plasterboard ceiling. Only for 596x596 mm recessed fittings.
Compreso di schermo diffusore piano trasparente e di kit attacco a soffitto.
Supplied with flat diffuser transparent and ceiling connection kit.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
AM101 50W 6000 lm 3000K 595x595x50 3,2 kg
AM102 50W 6000 lm 4000K 595x595x50 3,2 kg
LED A LUCE DIRETTA - DIRECT LIGHT LED
IP40 IK06
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
622
622
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice. For fittings with emergency kit, please add EM at the end of code.
KIT EMERGENZAEM EMERGENCY KITEM
NEW
Plexiform 101
102 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta o, solo per apparecchi a fluorescenza, con emissione diretta/indiretta (biemissione).Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso.Riflettore in alluminio speculare (fluorescenza), versione a luce diretta, ed in lamiera bianca preverniciata, per la versione a luce diretta/indiretta.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting for indoor use, direct or direct/indirect light (bi-emission) for fluorescent versions.Ceiling or suspension mounting. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body.Laminated specular aluminium reflector (fluorescent only), for direct light version and coated white steel for direct/indirect version.Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
VEGASoffittoCeiling
SospensioneSuspension
SistemaSystem
Plexiform 103
VEGA
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
KIT SOSPENSIONESUSPENSION KIT
CORPO ILLUMINANTELIGHTING FITTING
SCHERMO LAMELLARELOUVRE
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
SCHERMO DIFFUSOREDIFFUSER
KIT TESTATE TERMINALIEND CAPS KIT
GIUNTO LINEARELINEAR JOINT
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Vega FLUO T8 72W 295
Vega LED 40W 316
100100%consumo
consumption
EnergySaving
44%
56%consumo
consumption
10
20
30
40
50
60
70
80
90
Vega Fluo T872W
Vega LED40W
104 Plexiform
VEGA
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi lamellari, schermi diffusori oppure con ottiche antiriflesso- Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Louvres, diffusers or with antireflection optics- End cap kit- Suspension kit and/or ceiling connection
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi lamellari, schermi diffusori oppure con ottiche antiriflesso- Giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Louvres, diffusers or with antireflection optics- Linear joints and/or angle joints- End cap kit- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
VG10301
VG836
SV882
VG81001
SV918
VG80801
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
ESEMPIO D’ORDINE EXAMPLE OF ORDERPer realizzare un sistema con 3 VEGA LED 40W di colore nero occorrono:To create a system with 3 VEGA LED 40W black colour you require:
VEGA LED luce diretta 3 pezziVEGA LED direct light pieces
Schermi diffusori 3 pezziDiffusers pieces
Giunti lineari 1 pezziLinear joints pieces
Giunti angolari 1 pezziAngle joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
Kit sospensione 3 pezziSuspensions kit pieces
Kit giunto lineareLinear joint kit
Giunto angolareAngle joint
Testata terminaleEnd cap
Kit sospensioneSuspension kit
Kit sospensioneSuspension kit
Schermo diffusoreDiffuser
Schermo diffusore
Diffuser
Schermo diffusoreDiffuser
Testata terminaleEnd cap
ESEMPIO DI SISTEMASYSTEM EXAMPLE
VEGA VEGA
VEGA
Kit sospensioneSuspension kit
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 105
VEGA
106 Plexiform
VEGA
65
140
Versione a LED con schermo diffusoreLED version with diffuser
Ottica antiriflessoAntireflection optic
Schermo lamellareopacoOpal louvre
Schermo lamellaremetalizzatoMetalizzed louvre
Versione a luce diretta/indirettaDirect/Indirect light version
Plexiform 10701 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
VEGA
CodiceCode
PotenzaPower
Flusso lmFlux lm
CCT Dimensioni mmDimensions mm
PesoWeight
VG101XX 20W 2500 3000K 590x140x65 1,5 kgVG102XX 20W 2500 4000K 590x140x65 1,5 kgVG103XX 40W 5000 3000K 1130x140x65 2,2 kgVG104XX 40W 5000 4000K 1130x140x65 2,2 kgVG105XX 60W 7500 3000K 1670x140x65 2,9 kgVG106XX 60W 7500 4000K 1670x140x65 2,9 kg
LED A LUCE DIRETTA - DIRECT LIGHT LED
Coperture: 25+25 mm
Covers: 25+25 mm
IP20 IK05
IP20 IK05
IP20 IK05
IP20 IK05
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOVG111XX 2x24W 700x140x65 1,6 kgVG112XX 2x39W 1000x140x65 2,0 kgVG113XX 2x49W 1600x140x65 2,8 kgVG114XX 2x54W 1300x140x65 2,4 kgVG115XX 2x80W 1600x140x65 2,8 kg
HEVG116XX 2x14W 700x140x65 1,6 kgVG117XX 2x21W 1000x140x65 2,0 kgVG118XX 2x28W 1300x140x65 2,4 kgVG119XX 2x35W 1600x140x65 2,8 kg
FLUORESCENTE T5 A LUCE DIRETTA - DIRECT LIGHT T5 FLUORESCENT
I moduli sono cablati con unico reattore.Coperture: 89+89 mm
Modules are wired with a single ballast.Covers: 89+89 mm
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
VG121XX 1x18W 1080x140x65 2,2 kgVG122XX 1x30W 1380x140x65 2,6 kgVG123XX 1x36W 1680x140x65 3,0 kgVG124XX 1x58W 1980x140x65 3,4 kg
VG125XX 2x18W 1080x140x65 2,2 kgVG126XX 2x30W 1380x140x65 2,6 kgVG127XX 2x36W 1680x140x65 3,0 kgVG128XX 2x58W 1980x140x65 3,4 kg
FLUORESCENTE T8 A LUCE DIRETTA - DIRECT LIGHT T8 FLUORESCENT
I moduli bilampada sono cablati con unico reattore.Coperture: 220+280 mm.
The two-lamps modules are wired with a single ballast.Covers: 220+280 mm.
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
VG131XX 1x18W 1080x140x65 1,9 kg VG132XX 1x36W 1680x140x65 2,5 kgVG133XX 1x58W 1980x140x65 2,7 kg
VG134XX 2x18W 1080x140x65 1,9 kgVG135XX 2x36W 1680x140x65 2,5 kgVG136XX 2x58W 1980x140x65 2,7 kg
FLUORESCENTE T8 A LUCE DIRETTA/INDIRETTA - DIRECT/INDIRECT LIGHT T8 FLUORESCENT
I moduli bilampada sono cablati con unico reattore.I moduli sono completi di schermo diffusore superiore in policarbonato autoestinguente trasparente.Coperture: 220+280 mm.
The two-lamps modules are wired with a single ballast.Modules have upper diffuser in self-extinguishing transparent polycarbonate.Covers: 220+280 mm.
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1316mm x 142mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 389.52 cd/klm
Posizione C=0.00 G=20.00
Rendimento: 72.68%
Data: 13-07-2009
Asimmetrico
80
80
160
240
320
60
60
120
180
300
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1680mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 275.57 cd/klm
Posizione C=0.00 G=30.00
Rendimento: 66.36%
Data: 10-05-2000
Doppia Simmetria 240
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1680mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 190.74 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 73.17%
Data: 12-05-2000
Doppia Simmetria
NEW
108 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
VG808XX 7,5x140x65
VEGAAccessori Accessories
Kit testate terminali verniciateCoppia di testate in policarbonato autoestinguente, verniciate. Fissaggio ad innesto con viti. Da usare su moduli singoli o sugli ultimi moduli della linea.
Powder coated end cap kitPair of end caps in self-extinguishing polycarbonate, coated. Clip on fixture with screws. To be used on single modules or on the last modules of the line.
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit testate terminali Coppia di testate in policarbonato autoestinguente, fissaggio ad innesto con viti. Da usare su moduli singoli o sugli ultimi moduli della linea.
End cap kitPair of end caps in self-extinguishing polycarbonate, clip on fixture with screws. To be used on single modules or on the last modules of the line.
VG80501 7,5x140x65 - NeroVG80502 7,5x140x65 - Bianco
Schermo diffusore trasparente per T8 In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
Transparent T8 diffuser In internally splined self-extinguishing polycarbonate. Reduces dozzle. Makes it possible to obtain IP40 degree of protection for fittings.
VG842 580x125x23 - 1/2x18WVG843 880x125x23 - 1/2x30WVG844 1180x125x23 - 1/2x36WVG845 1480x125x23 - 1/2x58W
Schermo diffusore opale per LED In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
Opal LED diffuser In internally splined self-extinguishing polycarbonate. Reduces dozzle. Makes it possible to obtain IP40 degree of protection for fittings.
VG835 540x125x23 - 20WVG836 1080x125x23 - 40WVG837 1620x125x23 - 60W
Schermo diffusore trasparente per T5 In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
Transparent T5 diffuser In internally splined self-extinguishing polycarbonate. Reduces dozzle. Makes it possible to obtain IP40 degree of protection for fittings.
VG838 520x125x23 - 2x14/24WVG839 820x125x23 - 2x21/39WVG840 1120x125x23 - 2x28/54WVG841 1420x125x23 - 2x35/49/80W
Ottica antiriflesso per T5 Lamellare in alluminio speculare pre-anodizzato sottovuoto, antiriflesso, a bassissima iridescenza, a bassa luminanza e ad alto rendimento, fissaggio a scatto.
Antireflection T5 optic Laminated specular vacuum pre-anodized aluminium, antiglare with low iridescence, low luminance and high efficiency, snap on mounting.
VG849 520x125x28 - 2x14/24WVG850 1120x125x28 - 2x28/54WVG851 1420x125x28 - 2x35/49/80W
Ottica antiriflesso per T8 Lamellare in alluminio speculare pre-anodizzato sottovuoto, antiriflesso, a bassissima iridescenza, a bassa luminanza e ad alto rendimento, fissaggio a scatto.
Antireflection T8 optic Laminated specular vacuum pre-anodized aluminium, antiglare with low iridescence, low luminance and high efficiency, snap on mounting.
VG852 580x125x28 - 1/2x18WVG853 1180x125x28 - 1/2x36WVG854 1480x125x28 - 1/2x58W
65140
65140
7,5
7,5
125
540-1080-1620
23
125
520-820-1120-1420
23
125
580-880-1180-1480
23
520-1120-14
20
125
28
580-1180-14
80
125
28
Plexiform 109
VEGAAccessori Accessories
Kit attacco zincato per luce indiretta In lamiera zincata. Permette di fissare i moduli a sospensione montandoli a luce indiretta.
Galvanized suspension stirrup kit for indirect light In galvanized steel sheet. Used to suspend the modules with indirect light mounting.
VG812 88x20x29
VG820 580x125x23 - 1/2x18WVG821 880x125x23 - 1/2x30WVG822 1180x125x23 - 1/2x36WVG823 1480x125x23 - 1/2x58W
Kit schermi lamellari opali per T8 In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
Opal T8 louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Kit schermi lamellari opali per T5 In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
Opal T5 louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
VG816 520x125x23 - 2x14/24WVG817 820x125x23 - 2x21/39WVG818 1120x125x23 - 2x28/54WVG819 1420x125x23 - 2x35/49/80W
Kit schermi lamellari metallizzati per T8 In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
Metallized T8 louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
VG831 580x125x23 - 1/2x18WVG832 880x125x23 - 1/2x30WVG833 1180x125x23 - 1/2x36WVG834 1480x125x23 - 1/2x58W
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit schermi lamellari metallizzati per T5 In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
Metallized T5 louvre kitIn self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
VG827 520x125x23 - 2x14/24WVG828 820x125x23 - 2x21/39WVG829 1120x125x23 - 2x28/54WVG830 1420x125x23 - 2x35/49/80W
Kit attacco a soffitto In poliammide, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
Ceiling connection kitIn polyamide, fixed with screws. Makes it possible to fix the modules straight onto the ceiling.
VG81101 Ø35x27 - Nero/BlackVG81102 Ø35x27 - Bianco/White
29
88
27
Ø35
20
125
23
520-820-1120-14
20
125
23
520-820-1120-14
20
125
23
580-880-1180-14
80
125
23
580-880-1180-14
80
Kit sospensioneCoppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile. Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kitPair of chromed brass ceiling roses, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Allows adjustable installation height of the suspension. For simple and electrified ceiling roses go to page 336-337.
SV918 Ø16x44
44
Ø 16
110 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
VEGAAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit giunto lineare zincato a scomparsaIn lamiera di acciaio zincata, fissaggio con viti. Permette di realizzare una giunzione “invisibile” di due moduli in linea.
Galvanized invisible linear joint kitIn galvanized steel, fixed with screws. It makes possible to create an “invisible” joint of two modules in line.
SV882 60x21x4
Giunto lineareIn policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione in linea tra due moduli.
Linear jointIn self-extinguishing polycarbonate, clip on fixture with screws. Used to make a straight joint between two.
VG80601 14x140x65 - NeroVG80602 14x140x65 - Bianco
Giunto angolare In policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione a “L”(90°) tra due moduli.
90° angle joint In self-extinguishing polycarbonate, clip on fixture with screws. Used to make “L”(90°) joint between two modules.
VG80701 150x150x65 - NeroVG80702 150x150x65 - Bianco
Giunto lineare verniciato In policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione in linea tra due moduli.
Powder coat linear joint In self-extinguishing polycarbonate, clip on fixture with screws. Used to make a straight joint between two modules.
VG809XX 14x140x65
Giunto angolare verniciato In policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione a “L”(90°) tra due moduli.
Powder coat 90° angle joint In self-extinguishing polycarbonate, clip on fixture with screws. Used to make “L”(90°) joint between two modules.
VG810XX 150x150x65
Modulo binario I moduli vengono forniti con un binario elettrificato trifase (250/440V 16A) di marca IVELA, (art. 7511), completi di alimentazione destra e sinistra per la realizzazione di file continue e vanno completati con le testate terminali di chiusura.
Track Module Modules are supplied with an IVELA, (art. 7511), three-phased electrified track (250/440V 16A) complete with right and left hand feed to realize continuous lines and must be completed with end caps.
VG801XX 1080x140x65VG802XX 1380x140x65VG803XX 1680x140x65VG804XX 1980x140x65
14
140 65
14
6565
140
150
150
150
150
65
140
1080-1380-1680-1980
654
6021
Plexiform 111
VEGAAccessori Accessories
Foto: giunto a T su richiestaPhoto: T-joint on request
112 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni.Ad emissione diretta o, solo per apparecchi a fluorescenza monolampada e bilampada, con emissione diretta/indiretta (biemissione).Installazione a soffitto, sospensione o parete. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso, testate in pressofusione di alluminio.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminaliProdotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile analogico o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting for indoor use.Direct light or, only for fluorescent fittings single lamp and twin lamps, direct/indirect light (bi-emission).Ceiling, suspension or wall mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body with die-cast aluminium end caps.Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies to RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
QUADSistemaSystem
SoffittoCeiling
PareteWall
SospensioneSuspension
UGR<19
67%consumo
consumption
100%consumo
consumption
EnergySaving
33%
Plexiform 113
QUAD
CORPO ILLUMINANTELIGHTING FITTING
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
SCHERMO DIFFUSOREDIFFUSER
KIT TESTATE TERMINALIEND CAPS KIT
GIUNTO LINEARELINEAR JOINTKIT SOSPENSIONE
SUSPENSION KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
70
80
90
100
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Quad FLUO T5 54W 169
Quad LED 36W 29010
20
30
40
50
60
Quad Fluo T554W
Quad LED36W
UGR<19
114 Plexiform
QUAD 1
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- End cap kit- Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- Linear joints and/or angle joints- End cap kit- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare un sistema con 3 QUAD LED 36W di colore nero occorrono:To create a system with 3 QUAD LED 36W black colour you require:
QUAD 36W luce diretta 3 pezziQUAD 36W direct light pieces
Schermi diffusori 3 pezziDiffusers pieces
Giunti lineari 1 pezziLinear joints pieces
Giunti angolari 1 pezziAngle joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
Kit sospensione 3 pezziSuspensions kit pieces
QD10301
SV858
QD80201
QD80301
QD80101
SV918
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Giunto lineareLinear joint
Giunto angolareAngle joint
Testata terminaleEnd cap
Kit sospensioneSuspension kit
Kit sospensioneSuspension kit
Schermo diffusoreDiffuser
Schermo diffusore
Diffuser
Schermo diffusoreDiffuser
Testata terminaleEnd cap
ESEMPIO DI SISTEMASYSTEM EXAMPLE
QUAD QUAD
QU
AD
Kit sospensioneSuspension kit
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 115
QUAD 1
116 Plexiform
QUAD 1
75
65
Versione LED con schermo diffusoreLED version with diffuser
GIUNTO LINEARELINEAR JOINT
GIUNTO ANGOLAREANGLE JOINT
OTTICA ANTIRIFLESSO LED UGR<19LED ANTIRIFLECTION OPTIC UGR<19
OTTICA ANTIRIFLESSO FLUO UGR<19FLUO ANTIRIFLECTION OPTIC UGR<19
Ottica antiriflesso in alluminio satinato, UGR<19. Adatta per uffici con video terminali. Matt aluminium antireflection optic, UGR<19. Suitable for offices with VDU’s.
Plexiform 117
QUAD 1
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
QD101XX 18W 2000 lm 3000K 570x65x75 1,9 kgQD102XX 18W 2000 lm 4000K 570x65x75 1,9 kgQD103XX 36W 4000 lm 3000K 1110x65x75 3,0 kgQD104XX 36W 4000 lm 4000K 1110x65x75 3,0 kgQD105XX 54W 6000 lm 3000K 1650x65x75 4,3 kgQD106XX 54W 6000 lm 4000K 1650x65x75 4,3 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1100mm x 65mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4000.00 lm
Massimo 335.58 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 86.11%
Data: 23-07-2014
Doppia Simmetria
IP20 IK05
Copertura: 15 + 15 mm.Cover: 15 + 15 mm.
NEW
IP20 IK05CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOQD111XX 1x24W 580x65x75 2,0 kgQD112XX 1x39W 880x65x75 2,6 kgQD113XX 1x49W 1480x65x75 3,9 kgQD114XX 1x54W 1180x65x75 3,2 kgQD115XX 1x80W 1480x65x75 3,9 kg
HEQD116XX 1x14W 580x65x75 2,0 kgQD117XX 1x21W 880x65x75 2,6 kgQD118XX 1x28W 1180x65x75 3,2 kgQD119XX 1x35W 1480x65x75 3,9 kg
FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1200mm x 65mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4450.00 lm
Massimo 175.92 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 42.27%
Data: 15-01-2008
Doppia Simmetria
IP20 IK05
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOQD121XX 1x24W 580x65x75 1,9 kgQD122XX 1x39W 880x65x75 2,5 kgQD123XX 1x49W 1480x65x75 3,7 kgQD124XX 1x54W 1180x65x75 3,1 kgQD125XX 1x80W 1480x65x75 3,7 kg
HEQD126XX 1x14W 580x65x75 1,9 kgQD127XX 1x21W 880x65x75 2,5 kgQD128XX 1x28W 1180x65x75 3,1 kgQD129XX 1x35W 1480x65x75 3,7 kg
FLUORESCENTE T5 A LUCE DIRETTA/INDIRETTA – DIRECT/INDIRECT LIGHT T5 FLUORESCENT
Gli apparecchi vengono forniti completi di schermo diffusore superiore in policarbonato autoestinguente.
Fixtures supplied with upper transparent self-extinguishing polycarbonate diffuser.
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1200mm x 65mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 4450.00 lm
Massimo 119.15 cd/klm
Posizione C=45.00 G=175.00
Rendimento: 46.77%
Data: 28-07-2011
Doppia Simmetria
118 Plexiform
QUAD 1 PARETE
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Kit testate terminali
SINGLE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- End cap kit
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Giunti lineari- Kit testate terminali
IN-LINE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- Linear joints- End cap kit
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
75
65
Per realizzare un sistema con 4 QUAD parete LED 36W di colore nero occorrono:To create a system with 4 QUAD wall mounting LED 36W black colour you require:
QUAD 36W luce diretta 4 pezziQUAD 36W direct light pieces
Schermi diffusori 4 pezziDiffusers pieces
Giunti lineari 3 pezziLinear joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
QD16301
SV858
QD80201
QD80101
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Attacco a parete
Wall mounting
Versione a LED con ottica antiriflesso UGR<19LED version with UGR<19 antireflection optics
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 11901 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
PARETE QUAD 1
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
QD161XX 18W 2000 lm 3000K 570x65x75 1,9 kgQD162XX 18W 2000 lm 4000K 570x65x75 1,9 kgQD163XX 36W 4000 lm 3000K 1110x65x75 3,4 kgQD164XX 36W 4000 lm 4000K 1110x65x75 3,4 kgQD165XX 54W 6000 lm 3000K 1650x65x75 5,0 kgQD166XX 54W 6000 lm 4000K 1650x65x75 5,0 kg
LED A PARETE A LUCE DIRETTA – WALL MOUNTING DIRECT LIGHT LED
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOQD171XX 1x24W 580x65x75 1,9 kgQD172XX 1x39W 880x65x75 2,6 kgQD173XX 1x49W 1480x65x75 4,3 kgQD174XX 1x54W 1180x65x75 3,6 kgQD175XX 1x80W 1480x65x75 4,3 kg
HEQD176XX 1x14W 580x65x75 1,9 kgQD177XX 1x21W 880x65x75 2,6 kgQD178XX 1x28W 1180x65x75 3,6 kgQD179XX 1x35W 1480x65x75 4,3 kg
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOQD181XX 1x24W 580x65x75 1,8 kgQD182XX 1x39W 880x65x75 2,5 kgQD183XX 1x49W 1480x65x75 4,1 kgQD184XX 1x54W 1180x65x75 3,5 kgQD185XX 1x80W 1480x65x75 4,1 kg
HEQD186XX 1x14W 580x65x75 1,8 kgQD187XX 1x21W 880x65x75 2,5 kgQD188XX 1x28W 1180x65x75 3,5 kgQD189XX 1x35W 1480x65x75 4,1 kg
FLUORESCENTE T5 A PARETE A LUCE DIRETTA – WALL MOUNTING DIRECT LIGHT T5 FLUORESCENT
FLUO T5 A PARETE A LUCE DIRETTA/INDIRETTA – WALL MOUNTING DIRECT/INDIRECT LIGHT T5 FLUO
Attacco a parete e schermo diffusore superiore in dotazione.
Wall connection kit and upper diffuse included.
IP20 IK05
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1100mm x 65mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4000.00 lm
Massimo 335.58 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 86.11%
Data: 23-07-2014
Doppia Simmetria
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1200mm x 65mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4450.00 lm
Massimo 175.92 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 42.27%
Data: 15-01-2008
Doppia Simmetria
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1200mm x 65mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4450.00 lm
Massimo 119.15 cd/klm
Posizione C=45.00 G=175.00
Rendimento: 46.77%
Data: 28-07-2011
Doppia Simmetria
IP20 IK05
IP20 IK05
Attacco a parete in dotazione.Copertura: 15+15 mm.
Wall connection kit included.Cover: 15 + 15 mm.
Attacco a parete in dotazione.
Wall connection kit included.
NEW
120 Plexiform
QUAD 2
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Kit testate terminali- kit sospensione doppia o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- End cap kit- Double suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione doppia o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- Linear joints and/or angle joints- End cap kit- Double suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
75
195
Per realizzare un sistema con 4 QUAD LED 72W di colore nero occorrono:To create a system with 4 QUAD LED 72W black colour you require:
QUAD 72W luce diretta 4 pezziQUAD 72W direct light pieces
Schermi diffusori 8 pezziDiffusers pieces
Giunti lineari 6 pezziLinear joints pieces
Kit testate terminali 2 pezziEnd cap kit pieces
Kit sospensione doppia 4 pezziDouble suspensions kit pieces
QD13301
SV858
QD80201
QD80101
SV919
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Ottica antiriflesso
Antireflection optics
Versione a LED con schermo diffusoreLED version with diffuser
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 121
QUAD 2
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
QD131XX 36W 4000 lm 3000K 570x195x75 3,9 kgQD132XX 36W 4000 lm 4000K 570x195x75 3,9 kgQD133XX 72W 8000 lm 3000K 1110x195x75 6,1 kgQD134XX 72W 8000 lm 4000K 1110x195x75 6,1 kgQD135XX 108W 12000 lm 3000K 1650x195x75 8,6 kgQD136XX 108W 12000 lm 4000K 1650x195x75 8,6 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
IK05 IP20
IK05 IP20CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOQD141XX 2x24W 1580x195x75 4,0 kgQD142XX 2x39W 1880x195x75 5,2 kgQD143XX 2x49W 1480x195x75 7,8 kgQD144XX 2x54W 1180x195x75 6,4 kgQD145XX 2x80W 1480x195x75 7,8 kg
HEQD146XX 2x14W 580x195x75 4,0 kgQD147XX 2x21W 880x195x75 5,2 kgQD148XX 2x28W 1180x195x75 6,4 kgQD149XX 2x35W 1480x195x75 7,8 kg
FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1100mm x 65mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4000.00 lm
Massimo 335.58 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 86.11%
Data: 23-07-2014
Doppia Simmetria
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1200mm x 65mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4450.00 lm
Massimo 175.92 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 42.27%
Data: 15-01-2008
Doppia Simmetria
Copertura: 15+15 mmCover: 15+15 mm
NEW
NEW
IK05 IP20CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOQD151XX 2x24W 1580x195x75 3,8 kgQD152XX 2x39W 1880x195x75 5,0 kgQD153XX 2x49W 1480x195x75 7,5 kgQD154XX 2x54W 1180x195x75 6,2 kgQD155XX 2x80W 1480x195x75 7,5 kg
HEQD156XX 2x14W 1580x195x75 3,8 kgQD157XX 2x21W 1880x195x75 5,0 kgQD158XX 2x28W 1180x195x75 6,2 kgQD159XX 2x35W 1480x195x75 7,5 kg
FLUORESCENTE T5 A LUCE DIRETTA/INDIRETTA – DIRECT/INDIRECT LIGHT T5 FLUORESCENT
Gli apparecchi vengono forniti completi di schermo diffusore superiore in policarbonato autoestinguente.
Fixtures supplied with upper transparent self-extinguishing polycarbonate diffuser.
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1200mm x 65mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4450.00 lm
Massimo 119.15 cd/klm
Posizione C=45.00 G=175.00
Rendimento: 46.77%
Data: 28-07-2011
Doppia Simmetria
NEW
122 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
QUADAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit Testate terminali Coppia di testate in pressofusione di alluminio, verniciate. Fissaggio ad innesto con viti. Da usare su moduli singoli o sugli ultimi della linea.
End caps kit Pair of end caps in die-cast aluminium, powder coated. Clip on fixture with screws. To be used on single modules or on the last modules of the line.
QD801XX 10x65x75
75
65 10
Kit sospensione QUAD 1 Coppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
QUAD 1 suspension kit Pair of brass chrome ceiling rose, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Makes it possible the suspension of the fittings adjustable. For simple and electrified ceiling roses go to page 336-337.
SV918 Ø16x44
44
Ø 16
Kit sospensione QUAD 2 Due coppie di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
QUAD 2 suspension kit Two pairs of brass chrome ceiling rose, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Makes it possible the suspension of the fittings adjustable. For simple and electrified ceiling roses go to page 336-337.
SV919 Ø16x44
44
Ø 16
Schermo diffusore opale per LED In policarbonato autoestinguente, opale in appoggio su struttura. Permette di ridurre l’abbagliamento.
LED Opal diffuser In self-extinguishing opal polycarbonate based on fitting. Reduce dozzle.
SV857 565 mm - 18WSV858 1105 mm - 36WSV859 1645 mm - 54W
2
60
565-1105-1645
Schermo diffusore opale per T5 In policarbonato autoestinguente, opale in appoggio su struttura. Permette di ridurre l’abbagliamento.
T5 opal diffuser In self-extinguishing opal polycarbonate based on fitting. Reduce dozzle.
SV819 575 mm - 1x14/24WSV820 875 mm - 1x21/39WSV821 1175 mm - 1x28/54WSV822 1475 mm - 1x35/49/80W
2
60
575-875-1175-1475
Ottica antiriflesso per LED UGR<19 Lamellare in alluminio satinato, antiriflesso. Fissaggio a scatto. Adatta per uffici con videoterminali.
LED antireflection optic UGR<19 Laminated matt antiglare aluminium. Snap on fixture. Suitable for offices with VDU’s.
SV860 565x60x32 - 18WSV861 1105x60x32 - 36WSV862 1175x60x32 - 54W
60
32
Ottica antiriflesso per T5 UGR<19 Lamellare in alluminio speculare preanodizzato, antiriflesso a bassissima iridescenza. Fissaggio a scatto. Adatta per uffici con videoterminali.
T5 antireflection optic UGR<19Laminated specular pre-anodized aluminium antiglare with low iridescence. Snap on fixture. Suitable for offices with VDU’s.
SV829 575x60x32 - 1x14/24WSV830 875x60x32 - 1x21/39WSV831 1175x60x32 - 1x28/54WSV832 1475x60x32 - 1x35/49/80W
60
32
Plexiform 123
QUADAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Giunto lineare verniciato In profilato di alluminio e lamiera zincata, fissaggio con viti. Permette di realizzare una giunzione in linea tra due moduli.
Powder coated linear jointIn aluminium profile and galvanized plate, screw fixing. Used to make a stright joint between two modules.
QD802XX
Giunto angolare QUAD 1 In profilo di alluminio, fissaggio con viti. Permette di realizzare una giunzione a “L” (90°) tra due moduli.
QUAD 1 90° angle joint In aluminium profile, screw fixing. Designed to create an “L” (90°) joint between two modules.
QD803XX 90x90x75
Giunto angolare QUAD 2 In profilo di alluminio, fissaggio con viti. Permette di realizzare una giunzione a “L” (90°) tra due moduli.
QUAD 2 90° angle joint In aluminium profile, screw fixing. Designed to create an “L” (90°) joint between two modules.
QD804XX 220x220x75
75
200 200
Kit sospensione archetto QUAD 2 Due funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
QUAD 2 arc suspension kit Pair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
SV921 Ø16x44
Kit attacco a soffitto QUAD 1 In lamiera verniciata, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
Ceiling QUAD 1 connection kit Powder coat steel sheet fixed with screws. Makes it possible to fix the modules straight onto the ceiling.
SV881XX 20x20x1224x20x17
1712
24
20 20
Kit attacco a soffitto QUAD 2 In lamiera verniciata, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
Ceiling QUAD 2 connection kit Powder coat steel sheet fixed with screws. Makes it possible to fix the modules straight onto the ceiling.
QD805XX 20x12x20133x30x20 30
2020
133
12 20
75
90 90
44
Ø 16
124 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta.Installazione ad incasso. Possibilità di configurazione in fila continua con giunti lineari.Corpo e testate in lamiera.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni speciali.
LED or fluorescent fitting for indoor use, direct light.Recessed ceiling mounting. It allows the creation of a continuous line utilising linear joints.Sheet steel body and end caps.Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies to RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours.
QUAD INCASSO
SistemaSystem
IncassoRecessed
UGR<19
Plexiform 125
INCASSO QUADKIT GIUNTO LINEARELINEAR JOINT KIT
KIT TESTATE TERMINALIEND CAPS KIT
CORPO ILLUMINANTELIGHTING FITTING
SCHERMO DIFFUSOREDIFFUSER
70
80
90
100
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Quad incasso FLUO T5 54W 169
Quad incasso LED 36W 290 10
20
30
40
50
60
Quad incasso Fluo T554W
Quad incasso LED36W
67%consumo
consumption
100%consumo
consumption
EnergySaving
33%
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
UGR<19
126 Plexiform
QUAD 1 INCASSO
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Kit testate terminali
SINGLE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- End cap kit
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Giunti lineari- Kit testate terminali
IN-LINE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- Linear joints- End cap kit
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare un sistema con 3 QUAD INCASSO LED 36W di colore nero occorrono:To create a system with 3 QUAD INCASSO LED 36W black colour you require:
QUAD INCASSO 36W luce diretta 3 pezziQUAD INCASSO 36W direct light pieces
Schermi diffusori 3 pezziDiffusers pieces
Kit giunti lineari 2 pezziLinear joints kit pieces
Kit testate terminali 1 pezziEnd cap kit pieces
QI10301
SV858
QI803
QI80101
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Schermo diffusoreDiffuser
Schermo diffusoreDiffuser
Schermo diffusoreDiffuser
Kit giunto lineareLinear joint kit
Kit giunto lineareLinear joint kit
Testata terminaleEnd cap
Testata terminaleEnd cap
QUAD INCASSO QUAD INCASSO QUAD INCASSO
ESEMPIO DI SISTEMASYSTEM EXAMPLE
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 127
INCASSO QUAD 1
128 Plexiform
QUAD 1 INCASSO
63
84
Schermo diffusore
Diffuser
Versione FLUO con ottica antiriflesso UGR<19FLUO version with UGR<19 antireflection optics
FORO HOLE
72+- 3
Plexiform 129
INCASSO QUAD 1
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
QI101XX 18W 2000 lm 3000K 566x84x63 0,7 kgQI102XX 18W 2000 lm 4000K 566x84x63 0,7 kgQI103XX 36W 4000 lm 3000K 1106x84x63 1,4 kgQI104XX 36W 4000 lm 4000K 1106x84x63 1,4 kgQI105XX 54W 6000 lm 3000K 1646x84x63 2,2 kgQI106XX 54W 6000 lm 4000K 1646x84x63 2,2 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
IP20 IK0580
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1100mm x 65mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4000.00 lm
Massimo 335.58 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 86.11%
Data: 23-07-2014
Doppia Simmetria
NEW
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOQI111XX 1x24W 576x84x63 0,8 kgQI112XX 1x39W 876x84x63 1,2 kgQI113XX 1x49W 1476x84x63 2,0 kgQI114XX 1x54W 1176x84x63 1,5 kgQI115XX 1x80W 1476x84x63 2,0 kg
HEQI116XX 1x14W 576x84x63 0,8 kgQI117XX 1x21W 876x84x63 1,2 kgQI118XX 1x28W 1176x84x63 1,5 kgQI119XX 1x35W 1476x84x63 2,0 kg
FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT
IP20 IK0540
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1200mm x 65mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4450.00 lm
Massimo 175.92 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 42.27%
Data: 15-01-2008
Doppia Simmetria
OTTICA ANTIRIFLESSO LED UGR< 19LED ANTIRIFLECTION OPTIC UGR< 19
OTTICA ANTIRIFLESSO FLUO UGR< 19FLUO ANTIRIFLECTION OPTIC UGR< 19
Ottica antiriflesso in alluminio satinato, UGR<19. Adatta per uffici con video terminali.Matt aluminium antireflection optic, UGR<19. Suitable for offices with VDU’s.
130 Plexiform
QUAD 2 INCASSO
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori- Kit testate terminali
SINGLE MOUNTING All fittings must be completed with:- Diffusers- End cap kit
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori- Giunti lineari- Kit testate terminali
IN-LINE MOUNTING All fittings must be completed with:- Diffusers- Linear joints- End cap kit
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
63
126
Per realizzare un sistema con 4 QUAD INCASSO LED 40W di colore nero occorrono:To create a system with 4 QUAD INCASSO LED 36W black colour you require:
QUAD INCASSO 40W luce diretta 4 pezziQUAD INCASSO 40W direct light pieces
Schermi diffusori 4 pezziDiffusers pieces
Giunti lineari 3 pezziLinear joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
QI12301
SV864
QI803
QI80201
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Versione FLUO con schermo diffusoreFLUO version with diffuser
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
FORO HOLE111 +- 3
Plexiform 131
INCASSO QUAD 2
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
QI121XX 20W 2500 lm 3000K 566x126x63 0,9 kgQI122XX 20W 2500 lm 4000K 566x126x63 0,9 kgQI123XX 40W 5000 lm 3000K 1106x126x63 1,8 kgQI124XX 40W 5000 lm 4000K 1106x126x63 1,8 kgQI125XX 60W 7500 lm 3000K 1646x126x63 2,7 kgQI126XX 60W 7500 lm 4000K 1646x126x63 2,7 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOQI131XX 2x24W 576x126x63 1,0 kgQI132XX 2x39W 876x126x63 1,4 kgQI133XX 2x49W 1476x126x63 2,4 kgQI134XX 2x54W 1176x126x63 1,9 kgQI135XX 2x80W 1476x126x63 2,4 kg
HEQI136XX 2x14W 576x126x63 1,0 kgQI137XX 2x21W 876x126x63 1,4 kgQI138XX 2x28W 1176x126x63 1,9 kgQI139XX 2x35W 1476x126x63 2,4 kg
FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT
IP20 IK05
IP20 IK05
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1180mm x 125mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 248.81 cd/klm
Posizione C=45.00 G=5.00
Rendimento: 58.12%
Data: 28-07-2011
Asimmetrico
NEW
132 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
QUAD 1 INCASSOAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit testate terminali per QUAD 1 INCASSO Coppia di testate in lamiera, verniciate. Fissaggio con viti. Da usare su moduli singoli o sugli ultimi della linea.
QUAD 1 RECESSED end cap kit Pair of plate end caps, powder coat. Fix with screws. To be used on single modules or on the last modules of the line.
QI801XX 84x14x32
Kit giunto lineare per QUAD 1 INCASSO Fissaggio con coppia di viti e dadi. Permette di realizzare una giunzione in linea tra due moduli.
QUAD 1 RECESSED linear joint kitPair of screws and nuts fixing. Used to make a straight joint between two modules.
QI803
Schermo diffusore opale per LED QUAD 1 INCASSOIn policarbonato autoestinguente, opale in appoggio su struttura. Permette di ridurre l’abbagliamento.
QUAD 1 RECESSED LED opal diffuser In self-extinguishing opal polycarbonate based on fitting. Reduce dozzle.
SV857 565 mm - 18WSV858 1105 mm - 36WSV859 1645 mm - 54W
2
60
565-1105-1645
Schermo diffusore opale per QUAD 1 INCASSO T5 In policarbonato autoestinguente, opale in appoggio su struttura. Permette di ridurre l’abbagliamento.
QUAD 1 RECESSED T5 opal diffuserIn self-extinguishing opal polycarbonate based on fitting. Reduce dozzle.
SV819 575 mm - 1x14/24WSV820 875 mm - 1x21/39WSV821 1175 mm - 1x28/54WSV822 1475 mm - 1x35/49/80W
2
60
575-875-1175-1475
Ottica antiriflesso per QUAD 1 INCASSO LED UGR<19Lamellare in alluminio satinato, antiriflesso. Fissaggio a scatto. Adatta per uffici con videoterminali.
QUAD 1 RECESSED LED antireflection optic UGR<19Laminated matt antiglare aluminium. Snap on fixture. Suitable for offices with VDU’s.
SV860 565x60x32 - 18WSV861 1105x60x32 - 36WSV862 1645x60x32 - 54W
60
32
Ottica antiriflesso per QUAD 1 INCASSO T5 UGR<19 Lamellare in alluminio speculare preanodizzato, antiriflesso a bassissima iridescenza. Fissaggio a scatto. Adatta per uffici con videoterminali.
QUAD 1 RECESSED T5 antireflection optic UGR<19 Laminated specular pre-anodized aluminium antiglare with low iridescence. Snap on fixture. Suitable for offices with VDU’s.
SV829 575x60x32 - 1x14/24WSV830 875x60x32 - 1x21/39WSV831 1175x60x32 - 1x28/54WSV832 1475x60x32 - 1x35/49/80W
60
32
32
84
14
Plexiform 13301 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
INCASSO QUAD 2Accessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit testate terminali per QUAD 2 INCASSO Coppia di testate in lamiera, verniciate. Fissaggio con viti. Da usare su moduli singoli o sugli ultimi della linea.
QUAD 2 RECESSED end cap kit Pair of plate end caps, powder coat. Fix with screws. To be used on single modules or on the last modules of the line.
QI802XX 124x14x32
Kit giunto lineare per QUAD 2 INCASSO Fissaggio con coppia di viti e dadi. Permette di realizzare una giunzione in linea tra due moduli.
QUAD 2 RECESSED linear joint kitIn aluminium profile and galvanized plate, pair of screws and nuts fixing. Used to make a straight joint between two modules.
QI803
Schermo diffusore opale per QUAD 2 INCASSO LED In policarbonato autoestinguente, opale in appoggio su struttura. Permette di ridurre l’abbagliamento.
QUAD 2 RECESSED LED opal diffuser In self-extinguishing opal polycarbonate based on fitting. Reduce dozzle.
Schermo diffusore opale per QUAD 2 INCASSO T5 In policarbonato autoestinguente, opale in appoggio su struttura. Permette di ridurre l’abbagliamento.
QUAD 2 RECESSED T5 opal diffuser In self-extinguishing opal polycarbonate based on fitting. Reduce dozzle.
SV823 575 mm - 2x14/24WSV824 875 mm - 2x21/39WSV825 1175 mm - 2x28/54WSV826 1475 mm - 2x35/49/80W
SV863 565 mm - 20WSV864 1105 mm - 40WSV865 1645 mm - 60W
2
98
565-1105-1645
2
98
575-875-1175-1475
32
124
14
134 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta o con emissione diretta/indiretta (biemissione).Installazione a soffitto, sospensione o parete. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso, testate e giunzioni in pressofusione di alluminio.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting for indoor use, direct or direct/indirect light only (bi-emission).Ceiling, suspension or wall mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body with die-cast aluminium end caps and joints.Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, Wiring with line.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments.Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
TESISSistemaSystem
SoffittoCeiling
PareteWall
SospensioneSuspension
UGR<19
Plexiform 135
TESIS
70
80
90
100
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Tesis 1 FLUO T5 108W 416
Tesis 1 LED 40W 312 10
20
30
40
50
60
Tesis 1 Fluo T5108W
Tesis 1 LED40W
37%consumo
consumption
100%consumo
consumption
EnergySaving
63%
KIT SOSPENSIONESUSPENSION KIT
CORPO ILLUMINANTELIGHTING FITTING
SCHERMO DIFFUSOREDIFFUSER
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
KIT TESTATE TERMINALIEND CAPS KIT
GIUNTO LINEARELINEAR JOINT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
UGR<19
136 Plexiform
TESIS 1
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- End cap kit- Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- Linear joints and/or angle joints- End cap kit- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare un sistema con 3 TESIS LED 40W di colore nero occorrono:To create a system with 3 TESIS LED 40W black colour you require:
TESIS 40W luce diretta 3 pezziTESIS 40W direct light pieces
Schermi diffusori 3 pezziDiffusers pieces
Giunti lineari 1 pezziLinear joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
Kit sospensione 3 pezziSuspensions kit pieces
TS10301
TS811
TS80301
TS80101
SV920
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Giunto lineareLinear joint
Giunto angolareAngle joint
Testata terminaleEnd cap
Kit sospensioneSuspension kit
Kit sospensioneSuspension kit
Schermo diffusoreDiffuser
Schermo diffusore
Diffuser
Schermo diffusoreDiffuser
Testata terminaleEnd cap
ESEMPIO DI SISTEMASYSTEM EXAMPLE
TESIS TESIS
TESIS
Kit sospensioneSuspension kit
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 137
TESIS 1
138 Plexiform
TESIS 1
50
158
Versione a LED con schermo diffusoreLED version with diffuser
Luce indiretta
Indirect light
Ottica antiriflesso
Antireflection optic
Plexiform 13901 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
TESIS 1
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TS101XX 20W 2500 lm 3000K 550x158x50 2,0 kgTS102XX 20W 2500 lm 4000K 550x158x50 2,0 kgTS103XX 40W 5000 lm 3000K 1090x158x50 3,8 kgTS104XX 40W 5000 lm 4000K 1090x158x50 3,8 kgTS105XX 60W 7500 lm 3000K 1630x158x50 5,6 kgTS106XX 60W 7500 lm 4000K 1630x158x50 5,6 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TS111XX 20W+18W 4500 lm 3000K 550x158x50 1,9 kgTS112XX 20W+18W 4500 lm 4000K 550x158x50 1,9 kgTS113XX 40W+36W 9000 lm 3000K 1090x158x50 3,7 kgTS114XX 40W+36W 9000 lm 4000K 1090x158x50 3,7 kgTS115XX 60W+54W 13500 lm 3000K 1630x158x50 5,4 kgTS116XX 60W+54W 13500 lm 4000K 1630x158x50 5,4 kg
LED A LUCE DIRETTA/INDIRETTA – DIRECT/INDIRECT LIGHT LED
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOTS120XX 1x49W 1470x158x50 4,8 kgTS121XX 1x54W 1170x158x50 4,0 kgTS122XX 1x80W 1470x158x50 4,8 kg
HETS123XX 1x28W 1170x158x50 4,0 kgTS124XX 1x35W 1470x158x50 4,8 kg
HOTS125XX 2x49W 1470x158x50 5,1 kgTS126XX 2x54W 1170x158x50 4,2 kgTS127XX 2x80W 1470x158x50 5,1 kg
HETS128XX 2x28W 1170x158x50 4,2 kgTS129XX 2x35W 1470x158x50 5,1 kg
FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT
I moduli bilampada sono cablati con unico reattore.
Fluorescent two-lamps modules are wired with one single ballast.
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOTS130XX 1x49W 1470x158x50 4,6 kgTS131XX 1x54W 1170x158x50 3,9 kgTS132XX 1x80W 1470x158x50 4,6 kg
HETS133XX 1x28W 1170x158x50 3,9 kgTS134XX 1x35W 1470x158x50 4,6 kg
HOTS135XX 2x49W 1470x158x50 4,9 kgTS136XX 2x54W 1170x158x50 4,1 kgTS137XX 2x80W 1470x158x50 4,9 kg
HETS138XX 2x28W 1170x158x50 4,1 kgTS139XX 2x35W 1470x158x50 4,9 kg
FLUORESCENTE T5 A LUCE DIRETTA/INDIRETTA – DIRECT/INDIRECT LIGHT T5 FLUORESCENT
Gli apparecchi vengono forniti completi di schermo diffusore superiore in policarbonato autoestinguente.I moduli bilampada sono cablati con un unico reattore.
Fixtures supplied with upper transparent self-extinguishing polycarbonate diffuser.Two-lamps modules are wired with one single ballast.
IP20 IK06
IP20 IK06
IP20 IK06
Gli apparecchi vengono forniti completi di schermo diffusore superiore in policarbonato autoestinguente.
Fixtures supplied with upper transparent self-extinguishing polycarbonate diffuser.
IP20 IK06
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
70
70
140
140
210
210
280
280
350
350
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1100mm x 100mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 2600.00 lm
Massimo 316.13 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 125.18%
Data: 18-07-2014
Doppia Simmetria
60
60
120
180
240
300
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1210mm x 158mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 284.88 cd/klm
Posizione C=0.00 G=30.00
Rendimento: 59.98%
Data: 24-03-2010
Doppia Simmetria
50
50
100
100
150
150
200
200
250
250
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1210mm x 160mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 218.66 cd/klm
Posizione C=135.00 G=10.00
Rendimento: 76.18%
Data: 28-07-2011
Asimmetrico
NEW
NEW
140 Plexiform
TESIS 1 PARETE
50
158
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Kit testate terminali
SINGLE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- End cap kit
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Giunti lineari e/o giunti angolari- Kit testate terminali
IN-LINE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- Linear joints and/or angle joints- End cap kit
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare un sistema con 4 TESIS a parete LED 40W di colore nero occorrono:To create a system with 4 TESIS wall mounting LED 40W black colour you require:
TESIS 40W luce diretta 4 pezziTESIS 40W direct light pieces
Schermi diffusori 4 pezziDiffusers pieces
Giunti lineari 3 pezziLinear joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
TS14301
TS811
TS80301
TS80101
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Luce indiretta
Indirect light
Attacco a parete
Wall mounting
Versione con ottica antiriflessoVersion with antireflection optics
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 14101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
PARETE TESIS 1
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TS141XX 20W 2500 lm 3000K 550x158x50 3,0 kgTS142XX 20W 2500 lm 4000K 550x158x50 3,0 kgTS143XX 40W 5000 lm 3000K 1090x158x50 5,7 kgTS144XX 40W 5000 lm 4000K 1090x158x50 5,7 kgTS145XX 60W 7500 lm 3000K 1630x158x50 8,4 kgTS146XX 60W 7500 lm 4000K 1630x158x50 8,4 kg
LED A PARETE A LUCE DIRETTA – WALL MOUNTING DIRECT LIGHT LED
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TS151XX 20W+18W 4500 lm 3000K 550x158x50 2,9 kgTS152XX 20W+18W 4500 lm 4000K 550x158x50 2,9 kgTS153XX 40W+36W 9000 lm 3000K 1090x158x50 5,6 kgTS154XX 40W+36W 9000 lm 4000K 1090x158x50 5,6 kgTS155XX 60W+54W 13500 lm 3000K 1630x158x50 8,2 kgTS156XX 60W+54W 13500 lm 4000K 1630x158x50 8,2 kg
LED A PARETE A LUCE DIRETTA/INDIRETTA – WALL MOUNTING DIRECT/INDIRECT LIGHT LED
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOTS160XX 1x49W 1470x158x50 6,7 kgTS161XX 1x54W 1170x158x50 5,9 kgTS162XX 1x80W 1470x158x50 6,7 kg
HETS163XX 1x28W 1170x158x50 5,9 kgTS164XX 1x35W 1470x158x50 6,7 kg
HOTS165XX 2x49W 1470x158x50 7,0 kgTS166XX 2x54W 1170x158x50 6,1 kgTS167XX 2x80W 1470x158x50 7,0 kg
HETS168XX 2x28W 1170x158x50 6,1 kgTS169XX 2x35W 1470x158x50 7,0 kg
FLUORESCENTE T5 A PARETE A LUCE DIRETTA – WALL MOUNTING DIRECT LIGHT T5 FLUORESCENT
Attacco a parete in dotazione.I moduli bilampada sono cablati con un unico reattore.
Wall connection kit included.Two-lamps modules are wired with one single ballast.
Attacco a parete in dotazione.
Wall connection kit included.
Attacco a parete e schermo diffusore superiore in dotazione.
Wall connection kit and upper diffuser included.
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOTS170XX 1x49W 1470x158x50 6,5 kgTS171XX 1x54W 1170x158x50 5,8 kgTS172XX 1x80W 1470x158x50 6,5 kg
HETS173XX 1x28W 1170x158x50 5,8 kgTS174XX 1x35W 1470x158x50 6,5 kg
HOTS175XX 2x49W 1470x158x50 6,8 kgTS176XX 2x54W 1170x158x50 6,0 kgTS177XX 2x80W 1470x158x50 6,8 kg
HETS178XX 2x28W 1170x158x50 6,0 kgTS179XX 2x35W 1470x158x50 6,8 kg
FLUO T5 A PARETE A LUCE DIRETTA/INDIRETTA – WALL MOUNTING DIRECT/INDIRECT LIGHT T5 FLUO
Attacco a parete e schermo diffusore superiore in dotazione.I moduli bilampada sono cablati con un unico reattore.
Wall connection kit and upper diffuser included.Two-lamps modules are wired with one single ballast.
IP20 IK06
IP20 IK06
IP20 IK06
IP20 IK06
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
70
70
140
140
210
210
280
280
350
350
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1100mm x 100mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 2600.00 lm
Massimo 316.13 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 125.18%
Data: 18-07-2014
Doppia Simmetria
60
60
120
180
240
300
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1210mm x 158mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 284.88 cd/klm
Posizione C=0.00 G=30.00
Rendimento: 59.98%
Data: 24-03-2010
Doppia Simmetria
50
50
100
100
150
150
200
200
250
250
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1210mm x 160mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 218.66 cd/klm
Posizione C=135.00 G=10.00
Rendimento: 76.18%
Data: 28-07-2011
Asimmetrico
NEW
NEW
142 Plexiform
TESIS 2
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Kit testate terminali
SINGLE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- End cap kit
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso- Giunti lineari e/o giunti angolari- Kit testate terminali
IN-LINE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics- Linear joints and/or angle joints- End cap kit
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
50
298
Per realizzare un sistema con 4 TESIS LED 80W di colore nero occorrono:To create a system with 4 TESIS LED 80W black colour you require:
TESIS 80W luce diretta 4 pezziTESIS 80W direct light pieces
Schermi diffusori 8 pezziDiffusers pieces
Giunti lineari 3 pezziLinear joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
TS18301
TS811
TS80401
TS80201
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Luce indiretta
Indirect light
Ottica antiriflesso
Antireflection optic
Versione FLUO con schermo diffusoreFLUO version with diffuser
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 14301 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
TESIS 2
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TS181XX 40W 5000 lm 3000K 550x298x50 4,1 kgTS182XX 40W 5000 lm 4000K 550x298x50 4,1 kgTS183XX 80W 10000 lm 3000K 1090x298x50 8,0 kgTS184XX 80W 10000 lm 4000K 1090x298x50 8,0 kgTS185XX 120W 15000 lm 3000K 1630x298x50 11,9 kgTS186XX 120W 15000 lm 4000K 1630x298x50 11,9 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
IK06 IP20
IK06 IP20
IK06 IP20
IK06 IP20
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOTS200XX 2x49W 1470x298x50 10,9 kgTS201XX 2x54W 1170x298x50 8,3 kgTS202XX 2x80W 1470x298x50 10,9 kg
HETS203XX 2x28W 1170x298x50 8,3 kgTS204XX 2x35W 1470x298x50 10,9 kg
FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT
I moduli sono cablati con un unico reattore.Modules are wired with one single ballast.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TS191XX 40W+36W 9000 lm 3000K 550x298x50 3,9 kgTS192XX 40W+36W 9000 lm 4000K 550x298x50 3,9 kgTS193XX 80W+72W 18000 lm 3000K 1090x298x50 7,7 kgTS194XX 80W+72W 18000 lm 4000K 1090x298x50 7,7 kgTS195XX 120W+108W 27000 lm 3000K 1630x298x50 11,5 kgTS196XX 120W+108W 27000 lm 4000K 1630x298x50 11,5 kg
LED A LUCE DIRETTA/INDIRETTA – DIRECT/INDIRECT LIGHT LED
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOTS210XX 2x49W 1470x298x50 9,9 kgTS211XX 2x54W 1170x298x50 7,5 kgTS212XX 2x80W 1470x298x50 9,9 kg
HETS213XX 2x28W 1170x298x50 7,5 kgTS214XX 2x35W 1470x298x50 9,9 kg
FLUORESCENTE T5 A LUCE DIRETTA/INDIRETTA – DIRECT/INDIRECT LIGHT T5 FLUORESCENT
Gli apparecchi vengono forniti completi di schermo diffusore superiore in policarbonato autoestinguente. I moduli bilampada sono cablati con un unico reattore.
Fixtures supplied with upper transparent self-extinguishing polycarbonate diffuser. Two-lamps modules are wired with one single ballast.
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
70
70
140
140
210
210
280
280
350
350
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1100mm x 100mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 2600.00 lm
Massimo 316.13 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 125.18%
Data: 18-07-2014
Doppia Simmetria
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1210mm x 298mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 368.35 cd/klm
Posizione C=0.00 G=30.00
Rendimento: 55.76%
Data: 18-01-2008
Doppia Simmetria
50
50
100
100
150
150
200
200
250
250
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1210mm x 298mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 244.12 cd/klm
Posizione C=5.00 G=30.00
Rendimento: 80.36%
Data: 25-03-2008
Doppia Simmetria
NEW
NEW
Gli apparecchi vengono forniti completi di schermo diffusore superiore in policarbonato autoestinguente.
Fixtures supplied with upper transparent self-extinguishing polycarbonate diffuser.
144 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Schermo diffusore opale per T5In policarbonato autoestinguente, opale, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
T5 opal diffuser In self-extinguishing opal polycarbonate, snap on fixture. Reduce dozzle and makes possible to obtein IP40 degree of protection of the fitting.
Ottica antiriflesso per T5 UGR<19Lamellare in allumino speculare pre-anodizzato, antiriflesso a bassissima iridescenza. Struttura in profilo di alluminio verniciata dello stesso colore dell’apparecchio, fissaggio a scatto. Adatta per uffici con videoterminali.
T5 glossy aluminium antireflection optic UGR<19 Laminated specular pre-anodized aluminium antiglare with low iridescence. Profile powder coat in same colour of fitting, snap on fixture. Suitable for offices with VUDs.
TESIS Accessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit testate terminali TESIS 1 Coppia di testate in pressofusione di alluminio, verniciate. Fissaggio ad innesto con viti. Da usare su moduli singoli o sugli ultimi della linea.
TESIS 1 end cap kit Pair of end caps in die-cast aluminium, powder coated. Clip on fixture with screws. To be used on single modules or on the last modules of the line.
TS801XX 20x158x50
Kit testate terminali TESIS 2 Coppia di testate in pressofusione di alluminio, verniciate. Fissaggio ad innesto con viti. Da usare su moduli singoli o sugli ultimi della linea.
TESIS 2 end cap kit Pair of end caps in die-cast aluminium, powder coated. Clip on fixture with screws. To be used on single modules or on the last modules of the line.
TS802XX 20x298x50
TS813 1172 mm - 1/2x28/54WTS814 1472 mm - 1/2x35/49/80W
TS818XX 1172x130x35 - 1/2x28/54WTS819XX 1472x130x35 - 1/2x35/49/80W
50
158 20
50
298 20
SV920 Ø16x44 Kit sospensione archetto TESIS 1 Due funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
TESIS 1 arc suspension kit Pair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
44
Ø 16
44
Ø 16
Schermo diffusore opale per LED In policarbonato autoestinguente, opale, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
LED opal diffuser In self-extinguishing opal polycarbonate, snap on fixture. Reduce dozzle and makes possible to obtein IP40 degree of protection of the fitting.
2
130
552-1092-1632
2
130
1172-1472
TS810 552 mm - 20WTS811 1092 mm - 40WTS812 1632 mm - 60W
Kit sospensione archetto TESIS 2 Due funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
TESIS 2 arc suspension kit Pair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
SV921 Ø16x44
130
35
Plexiform 14501 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
TESISAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit attacco a soffitto TESIS 1 In lamiera verniciata, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
TESIS 1 ceiling connection kitPowder coat steel sheet fixed with screws. Makes it possible to fix the modules straight onto the ceiling.
TS808XX 20x12x2072x30x25
Kit attacco a soffitto TESIS 2 In lamiera verniciata, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
TESIS 2 ceiling connection kit Powder coat steel sheet fixed with screws. Makes it possible to fix the modules straight onto the ceiling.
TS809XX 20x12x20 212x30x25
TS803XX 20x158x50 Giunto lineare TESIS 1 In pressofusione di alluminio, fissaggio con viti, verniciato. Permette di realizzare una giunzione in linea tra due moduli.
TESIS 1 linear joint In die-cast aluminium, screw fixing, powder coat. Used to make a stright joint between two modules.
Giunto lineare TESIS 2 In pressofusione di alluminio, fissaggio con viti, verniciato. Permette di realizzare una giunzione in linea tra due moduli.
TESIS 2 linear joint In die-cast aluminium, screw fixing, powder coat. Used to make a stright joint between two modules.
TS804XX 20x298x50
Giunto angolare destro TESIS 1 In profilato di alluminio e pressofusione di alluminio, fissaggio con viti, verniciato. Permette di realizzare una giunzione a “L” (90°) verso destra tra due moduli.
TESIS 1 90° right angle joint In aluminium profile and die-cast aluminium, screw fixing, powder coat. Used to make a right “L” (90°) joint between two modules.
TS805XX 205x205x50
Giunto angolare sinistro TESIS 1 In profilato di alluminio e pressofusione di alluminio, fissaggio con viti, verniciato. Permette di realizzare una giunzione a “L” (90°) verso sinistra tra due moduli.
TESIS 1 90° left angle joint In aluminium profile and die-cast aluminium, screw fixing, powder coat. Used to make a left “L” (90°) joint between two modules.
TS806XX 205x205x50
Giunto angolare TESIS 2 In profilato di alluminio e pressofusione di alluminio, fissaggio con viti, verniciato. Permette di realizzare una giunzione a “L” (90°) tra due moduli.
TESIS 2 90° angle joint In aluminium profile and die-cast aluminium, screw fixing, powder coat. Designed to create an “L” (90°) joint between two modules.
TS807XX 346x346x50
50
158 20
50
298 20
205
346 346
205
205 205
5050
50
30
2520
212
1220
2520
1220
3072
146 Plexiform
TESIS PIANTANA
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta, indiretta o diretta/indiretta (biemissione).Corpo in alluminio estruso, testate in pressofusione di alluminio.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni speciali.
LED or fluorescent fitting for indoor use, direct, indirect or direct/indirect (bi-emission).Extruded aluminium body with die-cast aluminium end caps.Baked with epoxy powder coatings, resistant to damp enviroments and UV-ray stabilized.Supplied with electronic driver or ballast.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours.
PiantanaFloor lamp
UGR<19
Plexiform 14701 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
PIANTANA TESIS
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TS300XX 40W 5000 lm 3000K 625x298x1900 23,2 kgTS301XX 40W 5000 lm 4000K 625x298x1900 23,2 kg
LED A LUCE DIRETTA CON SCHERMO – DIRECT LIGHT LED WITH DIFFUSER
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TS310XX 40W+36W 9000 lm 3000K 625x298x1900 23,0 kgTS311XX 40W+36W 9000 lm 4000K 625x298x1900 23,0 kg
LED A LUCE DIRETTA/INDIRETTA CON SCHERMO – DIRECT/INDIRECT LIGHT LED WITH DIFFUSER
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TS320XX 36W 4000 lm 3000K 625x298x1900 24,9 kgTS321XX 36W 4000 lm 4000K 625x298x1900 24,9 kg
LED A LUCE INDIRETTA CON SCHERMO – INDIRECT LIGHT LED WITH DIFFUSER
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
TS330XX 2x36W 505x298x1900 22,8 kgTS331XX 2x55W 635x298x1900 23,2 kg
FLUO TC-L A LUCE DIRETTA CON SCHERMO – DIRECT LIGHT TC-L FLUO WITH DIFFUSER
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
610mm x 298mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3500.00 lm
Massimo 172.55 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 45.75%
Data: 18-01-2008
Doppia Simmetria
25
25
50
50
75
75
100
100
125
125
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
470mm x 298mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5800.00 lm
Massimo 109.44 cd/klm
Posizione C=0.00 G=155.00
Rendimento: 63.57%
Data: 25-03-2008
Doppia Simmetria
25
25
50
50
75
75
125
125
100
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
470mm x 298mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5800.00 lm
Massimo 109.44 cd/klm
Posizione C=0.00 G=155.00
Rendimento: 63.57%
Data: 25-03-2008
Doppia Simmetria
100
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 298mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 9600.00 lm
Massimo 172.55 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 45.75%
Data: 18-01-2008
Doppia Simmetria
IP40IK06
Completa di schermi diffusori.Supplied with diffusers.
IP40IK06
Completa di schermi diffusori.Supplied with diffusers.
IP40IK06
Completa di schermi diffusori.Supplied with diffusers.
IP40IK06
Completa di schermi diffusori.Supplied with diffusers.
NEW
NEW
NEW
148 Plexiform
TESIS PIANTANA
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
TS340XX 2x36W 505x298x1900 23,0 kgTS341XX 2x55W 635x298x1900 23,5 kg
FLUO TC-L A LUCE DIRETTA CON OTTICA – DIRECT LIGHT TC-L FLUO WITH OPTIC
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
TS350XX 2x36W 505x298x1900 23,5 kgTS351XX 2x55W 635x298x1900 24,2 kg
FLUO TC-L A LUCE DIRETTA/INDIRETTA CON SCHERMO – DIRECT/INDIRECT LIGHT TC-L FLUO WITH DIFFUSER
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
TS360XX 2x36W 505x298x1900 23,8 kgTS361XX 2x55W 635x298x1900 24,5 kg
FLUO TC-L A LUCE DIRETTA/INDIRETTA CON OTTICA – DIRECT/INDIRECT LIGHT TC-L FLUO WITH OPTIC
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
TS370XX 2x36W 505x298x1900 24,1 kgTS371XX 2x55W 635x298x1900 24,9 kg
FLUORESCENTE TC-L A LUCE INDIRETTA – INDIRECT LIGHT TC-L FLUORESCENT
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 298mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 9600.00 lm
Massimo 368.35 cd/klm
Posizione C=0.00 G=30.00
Rendimento: 55.76%
Data: 18-01-2008
Doppia Simmetria
125
125
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
470mm x 298mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5800.00 lm
Massimo 109.44 cd/klm
Posizione C=0.00 G=155.00
Rendimento: 63.57%
Data: 25-03-2008
Doppia Simmetria
25
25
50
50
75
75
100
100
0˚ 15˚15˚ 30˚30˚ 45˚45˚
250
250
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 298mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 9600.00 lm
Massimo 244.12 cd/klm
Posizione C=5.00 G=30.00
Rendimento: 80.36%
Data: 25-03-2008
Doppia Simmetria
50
50
100
100
150
150
200
200
25
25
50
50
75
75
100
125
125
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamm a
0
180
90
270
470mm x 298mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5800.00 lm
Massimo 109.44 cd/klm
Posizione C=0.00 G=155.00
Rendimento: 63.57%
Data: 25-03-2008
Doppia Simmetria
100
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
UGR<19
UGR<19
IP20IK06
Completa di ottiche antiriflesso.Supplied withantireflection optics.
IP20IK06
Completa di ottiche antiriflesso.Supplied withantireflection optics.
IP40IK06
IP40IK06
Completa di schermi diffusori.Supplied with diffusers.
Completa di schermi diffusori.Supplied with diffusers.
Plexiform 149
PIANTANA TESIS
Versione FLUO con ottica antiriflesso UGR<19FLUO version with UGR<19 antireflection optics
Versione FLUO con schermo diffusoreFLUO version with diffuser
150 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta.Installazione ad incasso. Possibilità di configurazione in fila continua con giunti lineari.Cornice in alluminio e cassonetto in lamiera zincata.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting for indoor use, direct light.Recessed mounting. It allows the creation of a continuous line utilising linear joints.Aluminium frame and body in galvanized sheet iron.Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
TESIS INCASSO
SistemaSystem
IncassoRecessed
UGR<19
Plexiform 151
INCASSO TESIS
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
SCHERMO DIFFUSOREDIFFUSER
70
80
90
100
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Tesis 1 incasso FLUO T5 108W 416
Tesis 1 incasso LED 40W 312 10
20
30
40
50
60
Tesis 1 incassoFluo T5 108W
Tesis 1 incassoLED 40W
37%consumo
consumption
100%consumo
consumption
EnergySaving
63%
TESIS 1 INCASSO
TESIS 2 INCASSO
UGR<19
152 Plexiform
TESIS 1 INCASSO
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso
SINGLE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso
IN-LINE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics
Per realizzare un sistema con 3 TESIS INCASSO LED 40W di colore nero occorrono:To create a system with 3 TESIS INCASSO LED 40W black colour you require:
TESIS INCASSO 40W inizio/fine linea 2 pezziTESIS INCASSO 40W start/end fitting pieces
TESIS INCASSO 40W intermedio 1 pezziTESIS INCASSO 40W intermediate fitting pieces
Schermi diffusori 3 pezziDiffusers pieces
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
TI11301
TI12301
TS811
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
ESEMPIO D’ORDINE EXAMPLE OF ORDER
Schermo diffusoreDiffuser
TESIS INCASSO inizio/fine lineaTESIS RECESSED start/end line
TESIS INCASSO intermedioTESIS RECESSED intermediate
Schermo diffusoreDiffuser
TESIS INCASSO inizio/fine lineaTESIS RECESSED start/end line
Schermo diffusoreDiffuser
ESEMPIO DI SISTEMASYSTEM EXAMPLE
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 153
INCASSO TESIS 1
75
166
Versione a LED con schermo diffusoreLED version with diffuser
Ottica antiriflesso
Antireflection optic
FORO HOLE158
154 Plexiform
TESIS 1 INCASSO
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TI101XX 20W 2500 lm 3000K 590x166x75 3,1 kgTI102XX 20W 2500 lm 4000K 590x166x75 3,1 kgTI103XX 40W 5000 lm 3000K 1130x166x75 4,0 kgTI104XX 40W 5000 lm 4000K 1130x166x75 4,0 kgTI105XX 60W 7500 lm 3000K 1670x166x75 4,9 kgTI106XX 60W 7500 lm 4000K 1670x166x75 4,9 kg
LED A LUCE DIRETTA MONTAGGIO SINGOLO – DIRECT LIGHT LED SINGLE MOUNTING
IP20 IK0570
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TI111XX 20W 2500 lm 3000K 550x166x75 2,9 kgTI112XX 20W 2500 lm 4000K 550x166x75 2,9 kgTI113XX 40W 5000 lm 3000K 1090x166x75 3,8 kgTI114XX 40W 5000 lm 4000K 1090x166x75 3,8 kgTI115XX 60W 7500 lm 3000K 1630x166x75 4,7 kgTI116XX 60W 7500 lm 4000K 1630x166x75 4,7 kg
LED A LUCE DIRETTA INTERMEDIO – DIRECT LIGHT LED INTERMEDIATE IN-LINE MOUNTING
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TI121XX 20W 2500 lm 3000K 570x166x75 3,0 kgTI122XX 20W 2500 lm 4000K 570x166x75 3,0 kgTI123XX 40W 5000 lm 3000K 1110x166x75 3,9 kgTI124XX 40W 5000 lm 4000K 1110x166x75 3,9 kgTI125XX 60W 7500 lm 3000K 1650x166x75 4,8 kgTI126XX 60W 7500 lm 4000K 1650x166x75 4,8 kg
LED A LUCE DIRETTA INIZIO/FINE LINEA – DIRECT LIGHT LED START/END IN-LINE MOUNTING
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
NEW
NEW
IP20 IK05
Da usare in combinazione con gli apparecchi intermedi.
To be used only with intermediate lighting fixture.
IP20 IK05
Da usare in combinazione con gli apparecchi inizio e fine linea.
To be used only with start and end line lighting fixture.
NEW
Plexiform 15501 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOTI130XX 1x49W 1510x166x75 4,6 kgTI131XX 1x54W 1210x166x75 4,1 kgTI132XX 1x80W 1510x166x75 4,6 kg
HETI133XX 1x28W 1210x166x75 4,1 kgTI134XX 1x35W 1510x166x75 4,6 kg
HOTI135XX 2x49W 1510x166x75 4,9 kgTI136XX 2x54W 1210x166x75 4,3 kgTI137XX 2x80W 1510x166x75 4,9 kg
HETI138XX 2x28W 1210x166x75 4,3 kgTI139XX 2x35W 1510x166x75 4,9 kg
FLUO T5 A LUCE DIRETTA MONTAGGIO SINGOLO – DIRECT LIGHT T5 FLUO SINGLE MOUNTING
IP20 IK0560
60
120
180
240
300
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1210mm x 158mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 284.88 cd/klm
Posizione C=0.00 G=30.00
Rendimento: 59.98%
Data: 24-03-2010
Doppia Simmetria
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOTI140XX 1x49W 1470x166x75 4,4 kgTI141XX 1x54W 1170x166x75 3,9 kgTI142XX 1x80W 1470x166x75 4,4 kg
HETI143XX 1x28W 1170x166x75 3,9 kgTI144XX 1x35W 1470x166x75 4,4 kg
HOTI145XX 2x49W 1470x166x75 4,7 kgTI146XX 2x54W 1170x166x75 4,1 kgTI147XX 2x80W 1470x166x75 4,7 kg
HETI148XX 2x28W 1170x166x75 4,1 kgTI149XX 2x35W 1470x166x75 4,7 kg
FLUO T5 A LUCE DIRETTA INTERMEDIO – DIRECT LIGHT T5 FLUO INTERMEDIATE IN-LINE MOUNTING
60
60
120
180
240
300
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1210mm x 158mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 284.88 cd/klm
Posizione C=0.00 G=30.00
Rendimento: 59.98%
Data: 24-03-2010
Doppia Simmetria
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOTI150XX 1x49W 1490x166x75 4,5 kgTI151XX 1x54W 1190x166x75 4,0 kgTI152XX 1x80W 1490x166x75 4,5 kg
HETI153XX 1x28W 1190x166x75 4,0 kgTI154XX 1x35W 1490x166x75 4,5 kg
HOTI155XX 2x49W 1490x166x75 4,8 kgTI156XX 2x54W 1190x166x75 4,2 kgTI157XX 2x80W 1490x166x75 4,8 kg
HETI158XX 2x28W 1190x166x75 4,2 kgTI159XX 2x35W 1490x166x75 4,8 kg
FLUO T5 A LUCE DIRETTA INIZIO/FINE LINEA – DIRECT LIGHT T5 FLUO START/END IN-LINE MOUNTING
60
60
120
180
240
300
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1210mm x 158mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 284.88 cd/klm
Posizione C=0.00 G=30.00
Rendimento: 59.98%
Data: 24-03-2010
Doppia Simmetria IP20 IK05
Da usare in combinazione con gli apparecchi intermedi.
To be used only with intermediate lighting fixture.
IP20 IK05
Da usare in combinazione con gli apparecchi inizio e fine linea.
To be used only with start and end line lighting fixture.
INCASSO TESIS 1
156 Plexiform
TESIS 2 INCASSO
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso
SINGLE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori o con ottiche antiriflesso
IN-LINE MOUNTING All fittings must be completed with:- Diffusers or with antireflection optics
Per realizzare un sistema con 3 TESIS INCASSO LED 80W di colore nero occorrono:To create a system with 3 TESIS RECESSED LED 80W black colour you require:
TESIS INCASSO 80W inizio/fine linea 2 pezziTESIS RECESSED 80W start/end fitting pieces
TESIS INCASSO 80W intermedio 1 pezziTESIS RECESSED 80W intermediate fitting pieces
Schermi diffusori 6 pezziDiffusers pieces
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
TI17301
TI18301
TS811
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
ESEMPIO D’ORDINE EXAMPLE OF ORDER
Schermo diffusoreDiffuser
TESIS INCASSO inizio/fine lineaTESIS RECESSED start/end line
TESIS INCASSO intermedioTESIS RECESSED intermediate
Schermo diffusoreDiffuser
TESIS INCASSO inizio/fine lineaTESIS RECESSED start/end line
Schermo diffusoreDiffuser
ESEMPIO DI SISTEMASYSTEM EXAMPLE
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 157
INCASSOTESIS 2
Versione FLUO con ottica antififlesso UGR<19FLUO version with antireflection optic UGR<19
305
75
Versione a LED con schermo diffusore
LED version with diffuser
FORO HOLE
297
158 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
TESIS 2 INCASSO
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TI161XX 40W 5000 lm 3000K 590x305x75 4,7 kgTI162XX 40W 5000 lm 4000K 590x305x75 4,7 kgTI163XX 80W 10000 lm 3000K 1130x305x75 6,0 kgTI164XX 80W 10000 lm 4000K 1130x305x75 6,0 kgTI165XX 120W 15000 lm 3000K 1670x305x75 7,3 kgTI166XX 120W 15000 lm 4000K 1670x305x75 7,3 kg
LED A LUCE DIRETTA MONTAGGIO SINGOLO – DIRECT LIGHT LED SINGLE MOUNTING
IK05 IP2070
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TI171XX 40W 5000 lm 3000K 550x305x75 4,5 kgTI172XX 40W 5000 lm 4000K 550x305x75 4,5 kgTI173XX 80W 10000 lm 3000K 1090x305x75 5,8 kgTI174XX 80W 10000 lm 4000K 1090x305x75 5,8 kgTI175XX 120W 15000 lm 3000K 1630x305x75 7,1 kgTI176XX 120W 15000 lm 4000K 1630x305x75 7,1 kg
LED A LUCE DIRETTA INTERMEDIO – DIRECT LIGHT LED INTERMEDIATE IN-LINE MOUNTING
IK05 IP2070
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TI181XX 40W 5000 lm 3000K 570x305x75 4,6 kgTI182XX 40W 5000 lm 4000K 570x305x75 4,6 kgTI183XX 80W 10000 lm 3000K 1110x305x75 5,9 kgTI184XX 80W 10000 lm 4000K 1110x305x75 5,9 kgTI185XX 120W 15000 lm 3000K 1650x305x75 7,2 kgTI186XX 120W 15000 lm 4000K 1650x305x75 7,2 kg
LED A LUCE DIRETTA INIZIO/FINE LINEA – DIRECT LIGHT LED START/END IN-LINE MOUNTING
IK05 IP2070
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
NEW
Da usare in combinazione con gli apparecchi intermedi.
To be used only with intermediate lighting fixture.
Da usare in combinazione con gli apparecchi inizio e fine linea.
To be used only with start and end line lighting fixture.
NEW
NEW
Plexiform 15901 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
INCASSO TESIS 2
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOTI190XX 2x49W 1510x305x75 6,9 kgTI191XX 2x54W 1210x305x75 6,1 kgTI192XX 2x80W 1510x305x75 6,9 kg
HETI193XX 2x28W 1210x305x75 6,1 kgTI194XX 2x35W 1510x305x75 6,9 kg
FLUO T5 A LUCE DIRETTA MONTAGGIO SINGOLO – DIRECT LIGHT T5 FLUO SINGLE MOUNTING
IK05 IP2040
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1210mm x 298mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 172.55 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 45.75%
Data: 18-01-2008
Doppia Simmetria
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOTI200XX 2x49W 1470x305x75 6,7 kgTI201XX 2x54W 1170x305x75 5,9 kgTI202XX 2x80W 1470x305x75 6,7 kg
HETI203XX 2x28W 1170x305x75 5,9 kgTI204XX 2x35W 1470x305x75 6,7 kg
FLUO T5 A LUCE DIRETTA INTERMEDIO – DIRECT LIGHT T5 FLUO INTERMEDIATE IN-LINE MOUNTING
IK05 IP2040
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1210mm x 298mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 172.55 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 45.75%
Data: 18-01-2008
Doppia Simmetria
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOTI210XX 2x49W 1490x305x75 6,8 kgTI211XX 2x54W 1190x305x75 6,0 kgTI212XX 2x80W 1490x305x75 6,8 kg
HETI213XX 2x28W 1190x305x75 6,0 kgTI214XX 2x35W 1490x305x75 6,8 kg
FLUO T5 A LUCE DIRETTA INIZIO/FINE LINEA – DIRECT LIGHT T5 FLUO START/END IN-LINE MOUNTING
IK05 IP2040
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1210mm x 298mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 172.55 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 45.75%
Data: 18-01-2008
Doppia Simmetria Da usare in combinazione con gli apparecchi intermedi.
To be used only with intermediate lighting fixture.
Da usare in combinazione con gli apparecchi inizio e fine linea.
To be used only with start and end line lighting fixture.
160 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Schermo diffusore opale per T5 In policarbonato autoestinguente, opale, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
T5 opal diffuser In self-extinguishing opal polycarbonate, snap on fixture. Reduce dozzle and makes possible to obtein IP40 degree of protection of the fitting.
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Schermo diffusore opale per LED In policarbonato autoestinguente, opale, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
LED opal diffuser In self-extinguishing opal polycarbonate, snap on fixture. Reduce dozzle and makes possible to obtein IP40 degree of protection of the fitting.
Ottica antiriflesso per T5 UGR<19 Lamellare in allumino speculare pre-anodizzato, antiriflesso a bassissima iridescenza. Struttura in profilo di alluminio verniciata dello stesso colore dell’apparecchio, fissaggio a scatto. Adatta per uffici con videoterminali.
T5 glossy aluminium antireflection optic UGR<19 Laminated specular pre-anodized aluminium antiglare with low iridescence. Profile powder coat in same colour of fitting, snap on fixture. Suitable for offices with VUDs.
TS818XX 1172x130x35 - 1/2x28/54WTS819XX 1472x130x35 - 1/2x35/49/80W
2
130
552-1092-1632
2
130
1172-1472
130
35
TS813 1172 mm - 1/2x28/54WTS814 1472 mm - 1/2x35/49/80W
TS810 552 mm - 20WTS811 1092 mm - 40WTS812 1632 mm - 60W
TESIS INCASSOAccessori Accessories
Plexiform 161
162 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta o, solo per apparecchi a fluorescenza, con emissione diretta/indiretta (biemissione).Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso.Riflettore in alluminio speculare (fluorescenza).Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I moduli bilampada fluorescenti sono cablati con un unico reattore.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting for indoor use, direct or, only for fluorescent fittings, direct/indirect light only (bi-emission).Ceiling or suspension mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body.Laminated specular aluminium reflector (fluorescent only).Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Fluorescent two-lamps modules are wired with one single ballast.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
PLANETSistemaSystem
SoffittoCeiling
SospensioneSuspension
Plexiform 163
PLANET
CORPO ILLUMINANTE SINGOLOSINGLE FITTING
CORPO ILLUMINANTE IN LINEAIN LINE FITTING
KIT SOSPENSIONESUSPENSION KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
GIUNTO LINEARELINEAR JOINT
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
SCHERMO DIFFUSOREDIFFUSER
70
80
90
100
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Planet FLUO T5 108W 336
Planet LED 40W 316 10
20
30
40
50
60
Planet Fluo T5108W
Planet LED40W
37%consumo
consumption
100%consumo
consumption
EnergySaving
63%
164 Plexiform
PLANET
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi alveolari, schermi diffusori oppure con ottiche antiriflesso- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Louvres, diffusers or with antireflection optics- Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi alveolari, schermi diffusori oppure con ottiche antiriflesso- Giunti lineari e/o giunti angolari- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Louvres, diffusers or with antireflection optics- Linear joints and/or angle joints- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO 03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare un sistema con 3 PLANET LED 40W di colore nero occorrono:To create a system with 3 PLANET LED 40W black colour you require:
PLANET 40W inizio linea 1 pezziPLANET 40W start line pieces
PLANET 40W intermedio 1 pezziPLANET 40W intermediate pieces
PLANET 40W fine linea 1 pezziPLANET 40W end line pieces
Schermi diffusori 3 pezziDiffusers pieces
Giunti lineari 2 pezziLinear Joints pieces
Kit sospensione 3 pezziSuspension kit pieces
PL11301
PL12301
PL13301
SV84801
SV87001
SV921
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
ESEMPIO DI SISTEMASYSTEM EXAMPLE
PLANET inizio lineaPLANET start line
Schermo diffusoreDiffuser
PLANET fine lineaPLANET end line
Schermo diffusoreDiffuser
PLANET intermedioPLANET intermediate
Schermo diffusoreDiffuser
Giunto lineareLinear joint
Giunto lineareLinear joint
Kit sospensioneSuspension kit
Kit sospensioneSuspension kit
Kit sospensioneSuspension kit
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
PLANET
Versione a LED con schermo diffusore microprismatoLED version with microprismatic diffuser
Ottica antiriflesso
Antireflection optic
Schermo alveolare opale
Opal louvre
Schermo alveolare metalizzato
Metallized louvre
40
250
Plexiform 165
166 Plexiform
PLANET
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
PL101XX 20W 2500 lm 3000K 670x250x40 2,9 kgPL102XX 20W 2500 lm 4000K 670x250x40 2,9 kgPL103XX 40W 5000 lm 3000K 1210x250x40 3,9 kgPL104XX 40W 5000 lm 4000K 1210x250x40 3,9 kgPL105XX 60W 7500 lm 3000K 1750x250x40 4,9 kgPL106XX 60W 7500 lm 4000K 1750x250x40 4,9 kg
LED A LUCE DIRETTA SINGOLO - DIRECT LIGHT LED SINGLE
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
PL111XX 20W 2500 lm 3000K 630x250x40 2,7 kgPL112XX 20W 2500 lm 4000K 630x250x40 2,7 kgPL113XX 40W 5000 lm 3000K 1170x250x40 3,7 kgPL114XX 40W 5000 lm 4000K 1170x250x40 3,7 kgPL115XX 60W 7500 lm 3000K 1710x250x40 4,7 kgPL116XX 60W 7500 lm 4000K 1710x250x40 4,7 kg
LED A LUCE DIRETTA INIZIO LINEA - DIRECT LIGHT LED START LINE
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
PL121XX 20W 2500 lm 3000K 590x250x40 2,5 kgPL122XX 20W 2500 lm 4000K 590x250x40 2,5 kgPL123XX 40W 5000 lm 3000K 1130x250x40 3,5 kgPL124XX 40W 5000 lm 4000K 1130x250x40 3,5 kgPL125XX 60W 7500 lm 3000K 1670x250x40 4,5 kgPL126XX 60W 7500 lm 4000K 1670x250x40 4,5 kg
LED A LUCE DIRETTA INTERMEDIO - DIRECT LIGHT LED INTERMEDIATE
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
PL131XX 20W 2500 lm 3000K 630x250x40 2,7 kgPL132XX 20W 2500 lm 4000K 630x250x40 2,7 kgPL133XX 40W 5000 lm 3000K 1170x250x40 3,7 kgPL134XX 40W 5000 lm 4000K 1170x250x40 3,7 kgPL135XX 60W 7500 lm 3000K 1710x250x40 4,7 kgPL136XX 60W 7500 lm 4000K 1710x250x40 4,7 kg
LED A LUCE DIRETTA FINE LINEA - DIRECT LIGHT LED END LINE
IP20 IK05
IP20 IK05
IP20 IK05
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
Da usare in combinazione con gli apparecchi intermedi e fine linea.
To be used only with intermediate and end line lighting fixture.
Da usare in combinazione con gli apparecchi inizio linea ed intermedi.
To be used only with start line and intermediate lighting fixture.
IP20 IK05
Da usare in combinazione con gli apparecchi inizio e fine linea.
To be used only with start and end line lighting fixture.
NEW
NEW
NEW
NEW
Plexiform 16701 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
PLANET
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOPL141XX 2x24W 630x250x40 2,8 kgPL142XX 2x39W 930x250x40 3,5 kgPL143XX 2x49W 1530x250x40 5,0 kgPL144XX 2x54W 1230x250x40 4,2 kgPL145XX 2x80W 1530x250x40 5,0 kg
HEPL146XX 2x14W 630x250x40 2,8 kgPL147XX 2x21W 930x250x40 3,5 kgPL148XX 2x28W 1230x250x40 4,2 kgPL149XX 2x35W 1530x250x40 5,0 kg
FLUORESCENTE T5 A LUCE DIRETTA SINGOLO - DIRECT LIGHT FLUORESCENT T5 SINGLE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOPL151XX 2x24W 605x250x40 2,6 kgPL152XX 2x39W 905x250x40 3,3 kgPL153XX 2x49W 1505x250x40 4,7 kgPL154XX 2x54W 1205x250x40 4,0 kgPL155XX 2x80W 1505x250x40 4,7 kg
HEPL156XX 2x14W 605x250x40 2,6 kgPL157XX 2x21W 905x250x40 3,3 kgPL158XX 2x28W 1205x250x40 4,0 kgPL159XX 2x35W 1505x250x40 4,7 kg
Da usare in combinazione con gli apparecchi intermedi e fine linea.
To be used only with intermediate and end line lighting fixture.
FLUORESCENTE T5 A LUCE DIRETTA INIZIO LINEA - DIRECT LIGHT FLUORESCENT T5 START LINE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOPL161XX 2x24W 580x250x40 2,5 kgPL162XX 2x39W 880x250x40 3,2 kgPL163XX 2x49W 1480x250x40 4,6 kgPL164XX 2x54W 1180x250x40 3,9 kgPL165XX 2x80W 1480x250x40 4,6 kg
HEPL166XX 2x14W 580x250x40 2,5 kgPL167XX 2x21W 880x250x40 3,2 kgPL168XX 2x28W 1180x250x40 3,9 kgPL169XX 2x35W 1480x250x40 4,6 kg
FLUORESCENTE T5 A LUCE DIRETTA INTERMEDIO - DIRECT LIGHT FLUORESCENT T5 INTERMEDIATE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOPL171XX 2x24W 605x250x40 2,6 kgPL172XX 2x39W 905x250x40 3,3 kgPL173XX 2x49W 1505x250x40 4,7 kgPL174XX 2x54W 1205x250x40 4,0 kgPL175XX 2x80W 1505x250x40 4,7 kg
HEPL176XX 2x14W 605x250x40 2,6 kgPL177XX 2x21W 905x250x40 3,3 kgPL178XX 2x28W 1205x250x40 4,0 kgPL179XX 2x35W 1505x250x40 4,7 kg
FLUORESCENTE A LUCE DIRETTA FINE LINEA - DIRECT LIGHT FLUORESCENT T5 END LINE
IP20 IK05
IP20 IK05
IP20 IK05
IP20 IK05
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
Da usare in combinazione con gli apparecchi inizio e fine linea.
To be used only with start and end line lighting fixture.
Da usare in combinazione con gli apparecchi inizio linea ed intermedi.
To be used only with start line and intermediate lighting fixture.
168 Plexiform
PLANET
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOPL181XX 2x24W 630x250x40 2,6 kgPL182XX 2x39W 930x250x40 3,2 kgPL183XX 2x49W 1530x250x40 4,4 kgPL184XX 2x54W 1230x250x40 3,8 kgPL185XX 2x80W 1530x250x40 4,4 kg
HEPL186XX 2x14W 630x250x40 2,6 kgPL187XX 2x21W 930x250x40 3,2 kgPL188XX 2x28W 1230x250x40 3,8 kgPL189XX 2x35W 1530x250x40 4,4 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA SINGOLO - DIRECT/INDIRECT LIGHT FLUO T5 SINGLE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOPL191XX 2x24W 605x250x40 2,4 kgPL192XX 2x39W 905x250x40 3,0 kgPL193XX 2x49W 1505x250x40 4,2 kgPL194XX 2x54W 1205x250x40 3,6 kgPL195XX 2x80W 1505x250x40 4,2 kg
HEPL196XX 2x14W 605x250x40 2,4 kgPL197XX 2x21W 905x250x40 3,0 kgPL198XX 2x28W 1205x250x40 3,6 kgPL199XX 2x35W 1505x250x40 4,2 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA INIZIO LINEA - DIRECT/INDIRECT LIGHT FLUO T5 START LINE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOPL201XX 2x24W 580x250x40 2,3 kgPL202XX 2x39W 880x250x40 2,9 kgPL203XX 2x49W 1480x250x40 4,1 kgPL204XX 2x54W 1180x250x40 3,5 kgPL205XX 2x80W 1480x250x40 4,1 kg
HEPL206XX 2x14W 580x250x40 2,3 kgPL207XX 2x21W 880x250x40 2,9 kgPL208XX 2x28W 1180x250x40 3,5 kgPL209XX 2x35W 1480x250x40 4,1 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA INTERMEDIO – DIRECT/INDIRECT LIGHT FLUO T5 INTERMEDIATE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOPL211XX 2x24W 605x250x40 2,4 kgPL212XX 2x39W 905x250x40 3,0 kgPL213XX 2x49W 1505x250x40 4,2 kgPL214XX 2x54W 1205x250x40 3,6 kgPL215XX 2x80W 1505x250x40 4,2 kg
HEPL216XX 2x14W 605x250x40 2,4 kgPL217XX 2x21W 905x250x40 3,0 kgPL218XX 2x28W 1205x250x40 3,6 kgPL219XX 2x35W 1505x250x40 4,2 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA FINE LINEA – DIRECT/INDIRECT LIGHT FLUO T5 END LINE
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 167.96 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 85.60%
Data: 08-07-2009
Asimmetrico
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 167.96 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 85.60%
Data: 08-07-2009
Asimmetrico
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 167.96 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 85.60%
Data: 08-07-2009
Asimmetrico
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 167.96 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 85.60%
Data: 08-07-2009
Asimmetrico
Da usare in combinazione con gli apparecchi intermedi e fine linea.Compreso di schermo diffusore superiore.
To be used only with intermediate and end line lighting fixture.Upper diffuser included.
IP20 IK05
Da usare in combinazione con gli apparecchi inizio e fine linea.Compreso di schermo diffusore superiore.
To be used only with start and end line lighting fixture.Upper diffuser included.
IP20 IK05
Da usare in combinazione con gli apparecchi inizio linea ed intermedi.Compreso di schermo diffusore superiore.
To be used only with start line and intermediate lighting fixture.Upper diffuser included.
IP20 IK05
IP20 IK05
Compreso di schermo diffusore superiore.
Upper diffuser included.
Plexiform 16901 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
PLANET
170 Plexiform
PLANET
40
430-630
Plexiform 17101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
PLANET
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
PL221XX 16W 2100 lm 3000K 430x430x40 4,4 kgPL222XX 16W 2100 lm 4000K 430x430x40 4,4 kg
PL231XX 50W 6000 lm 3000K 630x630x40 5,6 kgPL232XX 50W 6000 lm 4000K 630x630x40 5,6 kg
LED A LUCE DIRETTA SINGOLO - DIRECT LIGHT LED SINGLE
Compreso di schermo diffusore e di kit attacco a soffitto. Se si necessita di sospensione ordinarla a parte.
Diffuser and ceiling connection kit included. If suspended order suspension accessories separately.
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOPL251XX 4x24W 630x630x40 5,7 kg
HEPL252XX 4x14W 630x630x40 5,7 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA SINGOLO – DIRECT/INDIRECT LIGHT FLUO T5 SINGLE
Compreso di schermo diffusore superiore e inferiore.Ordinare a parte la sospensione.
Upper and bottom diffuser included. Order apart suspension kit.
IP40 IK05
IP40 IK05
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
596mm x 596mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6000.00 lm
Massimo 337.03 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 95.44%
Data: 16-07-2014
Doppia Simmetria
70
70
140
140
210
210
280
280
350
350
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1100mm x 100mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 2600.00 lm
Massimo 316.13 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 125.18%
Data: 18-07-2014
Doppia Simmetria
NEW
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOPL241XX 4x24W 630x630x40 5,7 kg
HEPL242XX 4x14W 630x630x40 5,7 kg
FLUORESCENTE T5 A LUCE DIRETTA SINGOLO - DIRECT LIGHT FLUORESCENT T5 SINGLE
Compreso di schermo diffusore e di kit attacco a soffitto. Se si necessita di sospensione ordinarla a parte.
Diffuser and ceiling connection kit included. If suspended order suspension accessories separately.
IP40 IK05
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
630mm x 630mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 7000.00 lm
Massimo 203.29 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 56.85%
Data: 10-07-2009
Asimmetrico
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
172 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Schermo diffusore microprismato per LED In policarbonato autoestinguente con cornice in profilo di alluminio verniciato dello stesso colore dell’apparecchio, fissaggio a scatto. Permette di ridurre l’abbagliamento e consente di ottenere il grado di protezione IP40.
LED microprismatic diffuserIn self-extinguishing polycarbonate with powder coat aluminium profile frame (same colour of the fitting), snap on fixture. Reduces dozzle and makes possible to obtein IP40 protection degree of the fitting.
Schermo diffusore microprismato per T5 In policarbonato autoestinguente con cornice in profilo di alluminio verniciato dello stesso colore dell’apparecchio, fissaggio a scatto. Permette di ridurre l’abbagliamento e consente di ottenere il grado di protezione IP40.
T5 microprismatic diffuserIn self-extinguishing polycarbonate with powder coat aluminium profile frame (same colour of the fitting), snap on fixture. Reduces dozzle and makes possible to obtein IP40 protection degree of the fitting.
Ottica antiriflesso per LEDLamellare in alluminio speculare preanodizzato, antiriflesso, a bassissima iridescenza, a bassa luminanza e ad alto rendimento, fissaggio a scatto (sporgenza dal modulo = 6 mm). Adatta per uffici con videoterminali.
LED antireflection optic Laminated specular pre-anodized aluminium, antiglare with low iridescence, low luminance and high efficiency, snap on fixture (proturing 6 mm from the module). Suitable for offices with VDUs.
Ottica antiriflesso per T5 Lamellare in allumino speculare preanodizzato, antiriflesso a bassissima iridescenza. Struttura in profilo di alluminio verniciata dello stesso colore dell’apparecchio, fissaggio a scatto (sporgenza dal modulo = 6 mm). Adatta per uffici con videoterminali.
T5 glossy aluminium antireflection opticLaminated specular pre-anodized aluminium antiglare with low iridescence. Profile powder coat in same colour of fitting, snap on fixture (proturing 6 mm from the module). Suitable for offices with VUDs.
PLANET Accessori Accessories
Kit schermi alveolari metallizzati per T5 In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
T5 metallized louvre kit In self-extinguishing polycarbonate. Snap on fixture. Reduces dozzle.
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit schermi alveolari opali per LED In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
LED opal louvre kit In self-extinguishing polycarbonate. Snap on fixture. Reduces dozzle.
Kit schermi alveolari metallizzati per LED In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
LED metallized louvre kit In self-extinguishing polycarbonate. Snap on fixture. Reduces dozzle.
SV850XX 538x158x9-2x14/24WSV851XX 838x158x9-2x21/39WSV852XX 1138x158x9-2x28/54WSV853XX 1438x158x9 2x35/49/80W
SV847XX 548x158x9 -20WSV848XX 1088x158x9 -40WSV849XX 1628x158x9 -60W
SV890 540x152x40-20WSV891 1080x152x40-40WSV892 1620x152x40-60W
SV840 540x150x12 -20WSV841 1080x150x12 -40WSV842 1620x150x12 -60W
SV893 530x152x40-2x14/24WSV894 830x152x40-2x21/39WSV895 1130x152x40-2x28/54WSV896 1430x152x40-2x35/49/80W
SV843 530x150x12 -2x14/24WSV844 830x150x12 -2x21/39WSV845 1130x150x12 -2x28/54WSV846 1430x150x12 -2x35/49/80W
SV833 540x150x12 -20WSV834 1080x150x12 -40WSV835 1620x150x12 -60W
540-1080-16
20
152
40
540-1080-16
20
150
12
540-1080-16
20
150
12
548-1088-16
28
158
9
158
9
538-838-1138-14
38
150
12
530-830-1130-14
30
530-830-1130-14
30
152
40
Plexiform 17301 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
PLANETAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
SV922 Ø16x44
Giunto lineareIn lamiera di acciaio zincata e profilo di alluminio, fissaggio con viti. Verniciato negli stessi colori dei moduli. Permette di realizzare una giunzione di due moduli in linea.
Linear jointIn galvanized steel aluminium profile, fixed with screws. Powder coat in same colour of modules. It makes possible to create an joint of two modules in line.
SV870XX
Kit schermi alveolari opali per T5 In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
T5 Opal louvre kit In self-extinguishing polycarbonate. Snap on fixture. Reduces dozzle.
SV836 530x150x12 -2x14/24WSV837 830x150x12 -2x21/39WSV838 1130x150x12 -2x28/54WSV839 1430x150x12 -2x35/49/80W
150
12
530-830-1130-14
30
SV827 142x33x23 Kit attacco a soffittoIn poliammide, di colore bianco, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
Ceiling connection kitIn polyamide, white coloured, fixed with screws. Makes it possible to fix the modues staright onto the ceiling.
142
33
23
Giunto angolareProfilo di alluminio, fissaggio con viti. Verniciato negli stessi colori dei moduli. Permette di realizzare una giunzione a “L” (90°) tra due moduli.
90° angle jointAluminium profile, fixed with screws. Powder coat in same colour of modules. It makes possible to create a “L” (90°) joint between the modules.
PL802XX 325x325x40
325
40
Kit sospensione archetto per apparecchi quadratiDue funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Arc suspension kit for square fittingsPair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
Kit sospensione archetto Due funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Arc suspension kit Pair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
SV921 Ø16x44
Kit sospensione doppia Due coppie di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Double suspension kit Two pairs of brass chrome ceiling rose, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Makes it possible the suspension of the fittings adjustable. For simple and electrified ceiling roses go to page 336-337.
SV919 Ø16x44
44
Ø 16
325
50
44
Ø 16
44
Ø 16
174 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta o, solo per apparecchi a fluorescenza, con emissione diretta/indiretta (biemissione).Installazione a soffitto o sospensione. Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso.Riflettore in alluminio speculare (fluorescenza).Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I moduli bilampada fluorescenti sono cablati con un unico reattore.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting for indoor use, direct or, only for fluorescent fittings, direct/indirect light only (bi-emission).Ceiling or suspension mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body.Laminated specular aluminium reflector (fluorescent only).Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Fluorescent two-lamps modules are wired with one single ballast.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
ECLISSESistemaSystem
SoffittoCeiling
SospensioneSuspension
Plexiform 175
ECLISSE
70
80
90
100
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Eclisse FLUO T5 108W 336
Eclisse LED 40W 316 10
20
30
40
50
60
Eclisse Fluo T5108W
Eclisse LED40W
37%consumo
consumption
100%consumo
consumption
EnergySaving
63%
KIT SOSPENSIONESUSPENSION KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
GIUNTO LINEARELINEAR JOINT
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
SCHERMO DIFFUSOREDIFFUSER
CORPO ILLUMINANTE SINGOLOSINGLE FITTING
CORPO ILLUMINANTE IN LINEAIN LINE FITTING
176 Plexiform
ECLISSE
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi alveolari, schermi diffusori oppure con ottiche antiriflesso- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Louvres, diffusers or with antireflection optics - Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi alveolari, schermi diffusori oppure con ottiche antiriflesso- Giunti lineari e/o giunti angolari- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Louvres, diffusers or with antireflection optics- Linear joints and/or angle joints- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare un sistema con 3 ECLISSE LED 40W di colore nero occorrono:To create a system with 3 ECLISSE LED 40W black colour you require:
ECLISSE 40W inizio linea 1 pezziECLISSE 40W start line pieces
ECLISSE 40W intermedio 1 pezziECLISSE 40W intermediate pieces
ECLISSE 40W fine linea 1 pezziECLISSE 40W end line pieces
Schermi diffusori 3 pezziDiffusers pieces
Giunti lineari 2 pezziLinear Joints pieces
Kit sospensione 3 pezziSuspension kit pieces
EC11301
EC12301
EC13301
SV84801
SV87001
SV921
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
ESEMPIO DI SISTEMASYSTEM EXAMPLE
ECLISSE inizio lineaECLISSE start line
Schermo diffusoreDiffuser
ECLISSE fine lineaECLISSE end line
Schermo diffusoreDiffuser
ECLISSE intermedioECLISSE intermediate
Schermo diffusoreDiffuser
Giunto lineareLinear joint
Giunto lineareLinear joint
Kit sospensioneSuspension kit
Kit sospensioneSuspension kit
Kit sospensioneSuspension kit
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 177
ECLISSE
40
280
Versione a LED con schermo diffusore microprismatoLED version with microprismatic diffuser
Ottica antiriflesso
Antireflection optic
Schermo alveolare opale
Opal louvre
Schermo alveolare metalizzato
Metallized louvre
178 Plexiform
ECLISSE
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
EC101XX 20W 2500 lm 3000K 670x280x40 3,0 kgEC102XX 20W 2500 lm 4000K 670x280x40 3,0 kgEC103XX 40W 5000 lm 3000K 1210x280x40 4,0 kgEC104XX 40W 5000 lm 4000K 1210x280x40 4,0 kgEC105XX 60W 7500 lm 3000K 1750x280x40 5,0 kgEC106XX 60W 7500 lm 4000K 1750x280x40 5,0 kg
LED A LUCE DIRETTA SINGOLO - DIRECT LIGHT LED SINGLE
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
EC111XX 20W 2500 lm 3000K 630x280x40 2,7 kgEC112XX 20W 2500 lm 4000K 630x280x40 2,7 kgEC113XX 40W 5000 lm 3000K 1170x280x40 3,8 kgEC114XX 40W 5000 lm 4000K 1170x280x40 3,8 kgEC115XX 60W 7500 lm 3000K 1710x280x40 4,8 kgEC116XX 60W 7500 lm 4000K 1710x280x40 4,8 kg
LED A LUCE DIRETTA INIZIO LINEA - DIRECT LIGHT LED START LINE
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
EC121XX 20W 2500 lm 3000K 590x280x40 2,5 kgEC122XX 20W 2500 lm 4000K 590x280x40 2,5 kgEC123XX 40W 5000 lm 3000K 1130x280x40 3,5 kgEC124XX 40W 5000 lm 4000K 1130x280x40 3,5 kgEC125XX 60W 7500 lm 3000K 1670x280x40 4,5 kgEC126XX 60W 7500 lm 4000K 1670x280x40 4,5 kg
LED A LUCE DIRETTA INTERMEDIO - DIRECT LIGHT LED INTERMEDIATE
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
EC131XX 20W 2500 lm 3000K 630x280x40 2,7 kgEC132XX 20W 2500 lm 4000K 630x280x40 2,7 kgEC133XX 40W 5000 lm 3000K 1170x280x40 3,8 kgEC134XX 40W 5000 lm 4000K 1170x280x40 3,8 kgEC135XX 60W 7500 lm 3000K 1710x280x40 4,8 kgEC136XX 60W 7500 lm 4000K 1710x280x40 4,8 kg
LED A LUCE DIRETTA FINE LINEA - DIRECT LIGHT LED END LINE
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
IP20 IK05
IP20 IK05
IP20 IK05
IP20 IK05
Da usare in combinazione con gli apparecchi intermedi e fine linea.
To be used only with intermediate and end line lighting fixture.
Da usare in combinazione con gli apparecchi inizio e fine linea.
To be used only with start and end line lighting fixture.
Da usare in combinazione con gli apparecchi inizio linea ed intermedi.
To be used only with start line and intermediate lighting fixture.
NEW
NEW
NEW
NEW
Plexiform 17901 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
ECLISSE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEC141XX 2x24W 660x280x40 3,1 kgEC142XX 2x39W 960x280x40 3,8 kgEC143XX 2x49W 1560x280x40 5,3 kgEC144XX 2x54W 1260x280x40 4,5 kgEC145XX 2x80W 1560x280x40 5,3 kg
HEEC146XX 2x14W 660x280x40 3,1 kgEC147XX 2x21W 960x280x40 3,8 kgEC148XX 2x28W 1260x280x40 4,5 kgEC149XX 2x35W 1560x280x40 5,3 kg
FLUORESCENTE T5 A LUCE DIRETTA SINGOLO - DIRECT LIGHT FLUORESCENT T5 SINGLE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEC151XX 2x24W 620x280x40 2,7 kgEC152XX 2x39W 920x280x40 3,5 kgEC153XX 2x49W 1520x280x40 4,9 kgEC154XX 2x54W 1220x280x40 4,2 kgEC155XX 2x80W 1520x280x40 4,9 kg
HEEC156XX 2x14W 620x280x40 2,7 kgEC157XX 2x21W 920x280x40 3,5 kgEC158XX 2x28W 1220x280x40 4,2 kgEC159XX 2x35W 1520x280x40 4,9 kg
FLUORESCENTE T5 A LUCE DIRETTA INIZIO LINEA - DIRECT LIGHT FLUORESCENT T5 START LINE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEC161XX 2x24W 580x280x40 2,6 kgEC162XX 2x39W 880x280x40 3,3 kgEC163XX 2x49W 1480x280x40 4,8 kgEC164XX 2x54W 1180x280x40 4,1 kgEC165XX 2x80W 1480x280x40 4,8 kg
HEEC166XX 2x14W 580x280x40 2,6 kgEC167XX 2x21W 880x280x40 3,3 kgEC168XX 2x28W 1180x280x40 4,1 kgEC169XX 2x35W 1480x280x40 4,8 kg
FLUORESCENTE T5 A LUCE DIRETTA INTERMEDIO - DIRECT LIGHT FLUORESCENT T5 INTERMEDIATE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEC171XX 2x24W 620x280x40 2,7 kgEC172XX 2x39W 920x280x40 3,5 kgEC173XX 2x49W 1520x280x40 4,9 kgEC174XX 2x54W 1220x280x40 4,2 kgEC175XX 2x80W 1520x280x40 4,9 kg
HEEC176XX 2x14W 620x280x40 2,7 kgEC177XX 2x21W 920x280x40 3,5 kgEC178XX 2x28W 1220x280x40 4,2 kgEC179XX 2x35W 1520x280x40 4,9 kg
FLUORESCENTE T5 A LUCE DIRETTA FINE LINEA - DIRECT LIGHT FLUORESCENT T5 END LINE
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
Da usare in combinazione con gli apparecchi intermedi e fine linea.
To be used only with intermediate and end line lighting fixture.
IP20 IK05
IP20 IK05
IP20 IK05
IP20 IK05
Da usare in combinazione con gli apparecchi inizio e fine linea.
To be used only with start and end line lighting fixture.
Da usare in combinazione con gli apparecchi inizio linea ed intermedi.
To be used only with start line and intermediate lighting fixture.
180 Plexiform
ECLISSE
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEC181XX 2x24W 660x280x40 2,9 kgEC182XX 2x39W 960x280x40 3,5 kgEC183XX 2x49W 1560x280x40 4,7 kgEC184XX 2x54W 1260x280x40 4,1 kgEC185XX 2x80W 1560x280x40 4,7 kg
HEEC186XX 2x14W 660x280x40 2,9 kgEC187XX 2x21W 960x280x40 3,5 kgEC188XX 2x28W 1260x280x40 4,1 kgEC189XX 2x35W 1560x280x40 4,7 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA SINGOLO - DIRECT/INDIRECT LIGHT FLUO T5 SINGLE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEC191XX 2x24W 620x280x40 2,5 kgEC192XX 2x39W 920x280x40 3,2 kgEC193XX 2x49W 1520x280x40 4,4 kgEC194XX 2x54W 1220x280x40 3,8 kgEC195XX 2x80W 1520x280x40 4,4 kg
HEEC196XX 2x14W 620x280x40 2,5 kgEC197XX 2x21W 920x280x40 3,2 kgEC198XX 2x28W 1220x280x40 3,8 kgEC199XX 2x35W 1520x280x40 4,4 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA INIZIO LINEA - DIRECT/INDIRECT LIGHT FLUO T5 START LINE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEC201XX 2x24W 580x280x40 2,4 kgEC202XX 2x39W 880x280x40 3,0 kgEC203XX 2x49W 1480x280x40 4,2 kgEC204XX 2x54W 1180x280x40 3,6 kgEC205XX 2x80W 1480x280x40 4,2 kg
HEEC206XX 2x14W 580x280x40 2,4 kgEC207XX 2x21W 880x280x40 3,0 kgEC208XX 2x28W 1180x280x40 3,6 kgEC209XX 2x35W 1480x280x40 4,2 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA INTERMEDIO – DIRECT/INDIRECT LIGHT FLUO T5 INTERMEDIATE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEC211XX 2x24W 620x280x40 2,5 kgEC212XX 2x39W 920x280x40 3,2 kgEC213XX 2x49W 1520x280x40 4,4 kgEC214XX 2x54W 1220x280x40 3,8 kgEC215XX 2x80W 1520x280x40 4,4 kg
HEEC216XX 2x14W 620x280x40 2,5 kgEC217XX 2x21W 920x280x40 3,2 kgEC218XX 2x28W 1220x280x40 3,8 kgEC219XX 2x35W 1520x280x40 4,4 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA FINE LINEA – DIRECT/INDIRECT LIGHT FLUO T5 END LINE
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 167.96 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 85.60%
Data: 08-07-2009
Asimmetrico
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 167.96 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 85.60%
Data: 08-07-2009
Asimmetrico
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 167.96 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 85.60%
Data: 08-07-2009
Asimmetrico
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 167.96 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 85.60%
Data: 08-07-2009
Asimmetrico
Da usare in combinazione con gli apparecchi intermedi e fine linea.Compreso di schermo diffusore superiore.
To be used only with intermediate and end line lighting fixture.Upper diffuser included.
IP20 IK05
Da usare in combinazione con gli apparecchi inizio e fine linea.Compreso di schermo diffusore superiore.
To be used only with start and end line lighting fixture.Upper diffuser included.
IP20 IK05
Da usare in combinazione con gli apparecchi inizio linea ed intermedi.Compreso di schermo diffusore superiore.
To be used only with start line and intermediate lighting fixture.Upper diffuser included.
IP20 IK05
IP20 IK05
Compreso di schermo diffusore superiore.
Upper diffuser included.
Plexiform 18101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
182 Plexiform
ECLISSE
40
460-660
Plexiform 18301 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
ECLISSE
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
EC221XX 16W 2100 lm 3000K 460x460x40 4,4 kgEC222XX 16W 2100 lm 4000K 460x460x40 4,4 kg
EC231XX 50W 6000 lm 3000K 660x660x40 5,6 kgEC232XX 50W 6000 lm 4000K 660x660x40 5,6 kg
LED A LUCE DIRETTA SINGOLO - DIRECT LIGHT LED SINGLE
Compreso di schermo diffusore e di kit attacco a soffitto. Se si necessita di sospensione ordinarla a parte.
Diffuser and ceiling connection kit included. If suspended order suspension accessories separately.
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEC241XX 4x24W 660x660x40 6,0 kg
HEEC242XX 4x14W 660x660x40 6,0 kg
FLUORESCENTE T5 A LUCE DIRETTA SINGOLO - DIRECT LIGHT FLUORESCENT T5 SINGLE
Compreso di schermo diffusore e di kit attacco a soffitto. Se si necessita di sospensione ordinarla a parte.
Diffuser and ceiling connection kit included. If suspended order suspension accessories separately.
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEC251XX 4x24W 660x660x40 6,0 kg
HEEC252XX 4x14W 660x660x40 6,0 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA SINGOLO – DIRECT/INDIRECT LIGHT FLUO T5 SINGLE
IP40 IK05
IP40 IK05
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
596mm x 596mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6000.00 lm
Massimo 337.03 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 95.44%
Data: 16-07-2014
Doppia Simmetria
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
630mm x 630mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 7000.00 lm
Massimo 203.29 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 56.85%
Data: 10-07-2009
Asimmetrico
Compreso di schermo diffusore superiore e inferiore.Ordinare a parte la sospensione.
Upper and bottom diffuser included. Order apart suspension kit.
IP40 IK05
70
70
140
140
210
210
280
280
350
350
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1100mm x 100mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 2600.00 lm
Massimo 316.13 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 125.18%
Data: 18-07-2014
Doppia Simmetria
NEW
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
184 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
ECLISSE Accessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
SV850XX 538x158x9-2x14/24WSV851XX 838x158x9-2x21/39WSV852XX 1138x158x9-2x28/54WSV853XX 1438x158x9 2x35/49/80W
SV847XX 548x158x9 -20WSV848XX 1088x158x9 -40WSV849XX 1628x158x9 -60W
SV890 540x152x40-20WSV891 1080x152x40-40WSV892 1620x152x40-60W
SV840 540x150x12 -20WSV841 1080x150x12 -40WSV842 1620x150x12 -60W
SV893 530x152x40-2x14/24WSV894 830x152x40-2x21/39WSV895 1130x152x40-2x28/54WSV896 1430x152x40-2x35/49/80W
SV843 530x150x12 -2x14/24WSV844 830x150x12 -2x21/39WSV845 1130x150x12 -2x28/54WSV846 1430x150x12 -2x35/49/80W
SV833 540x150x12 -20WSV834 1080x150x12 -40WSV835 1620x150x12 -60W
540-1080-16
20
152
40
540-1080-16
20
150
12
540-1080-16
20
150
12
548-1088-16
28
158
9
158
9
538-838-1138-14
38
150
12
530-830-1130-14
30
530-830-1130-14
30
152
40
Schermo diffusore microprismato per LED In policarbonato autoestinguente con cornice in profilo di alluminio verniciato dello stesso colore dell’apparecchio, fissaggio a scatto. Permette di ridurre l’abbagliamento e consente di ottenere il grado di protezione IP40.
LED microprismatic diffuserIn self-extinguishing polycarbonate with powder coat aluminium profile frame (same colour of the fitting), snap on fixture. Reduces dozzle and makes possible to obtein IP40 protection degree of the fitting.
Schermo diffusore microprismato per T5 In policarbonato autoestinguente con cornice in profilo di alluminio verniciato dello stesso colore dell’apparecchio, fissaggio a scatto. Permette di ridurre l’abbagliamento e consente di ottenere il grado di protezione IP40.
T5 microprismatic diffuserIn self-extinguishing polycarbonate with powder coat aluminium profile frame (same colour of the fitting), snap on fixture. Reduces dozzle and makes possible to obtein IP40 protection degree of the fitting.
Ottica antiriflesso per LEDLamellare in alluminio speculare preanodizzato, antiriflesso, a bassissima iridescenza, a bassa luminanza e ad alto rendimento, fissaggio a scatto (sporgenza dal modulo = 6 mm). Adatta per uffici con videoterminali.
LED antireflection optic Laminated specular pre-anodized aluminium, antiglare with low iridescence, low luminance and high efficiency, snap on fixture (proturing 6 mm from the module). Suitable for offices with VDUs.
Ottica antiriflesso per T5 Lamellare in allumino speculare preanodizzato, antiriflesso a bassissima iridescenza. Struttura in profilo di alluminio verniciata dello stesso colore dell’apparecchio, fissaggio a scatto (sporgenza dal modulo = 6 mm). Adatta per uffici con videoterminali.
T5 glossy aluminium antireflection opticLaminated specular pre-anodized aluminium antiglare with low iridescence. Profile powder coat in same colour of fitting, snap on fixture (proturing 6 mm from the module). Suitable for offices with VUDs.
Kit schermi alveolari metallizzati per T5 In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
T5 metallized louvre kit In self-extinguishing polycarbonate. Snap on fixture. Reduces dozzle.
Kit schermi alveolari opali per LED In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
LED opal louvre kit In self-extinguishing polycarbonate. Snap on fixture. Reduces dozzle.
Kit schermi alveolari metallizzati per LED In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
LED metallized louvre kit In self-extinguishing polycarbonate. Snap on fixture. Reduces dozzle.
Plexiform 18501 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
ECLISSEAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
SV922 Ø16x44
Giunto lineare In lamiera di acciaio zincata e profilo di alluminio, fissaggio con viti. Verniciato negli stessi colori dei moduli. Permette di realizzare una giunzione di due moduli in linea.
Linear jointIn galvanized steel aluminium profile, fixed with screws. Powder coat in same colour of modules. It makes possible to create an joint of two modules in line.
SV870XX
Kit schermi alveolari opali per T5 In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
T5 Opal louvre kit In self-extinguishing polycarbonate. Snap on fixture. Reduces dozzle.
SV836 530x150x12 -2x14/24WSV837 830x150x12 -2x21/39WSV838 1130x150x12 -2x28/54WSV839 1430x150x12 -2x35/49/80W
150
12
530-830-1130-14
30
SV827 142x33x23
142
33
23
Giunto angolareProfilo di alluminio, fissaggio con viti. Verniciato negli stessi colori dei moduli. Permette di realizzare una giunzione a “L” (90°) tra due moduli.
90° angle jointAluminium profile, fixed with screws. Powder coat in same colour of modules. It makes possible to create a “L” (90°) joint between the modules.
EC802XX 315x315x40
315
40
315
Kit sospensione archetto per apparecchi quadratiDue funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Arc suspension kit for square fittingsPair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
Kit sospensione archetto Due funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Arc suspension kit Pair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
SV921 Ø16x44
Kit sospensione doppia Due coppie di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Double suspension kit Two pairs of brass chrome ceiling rose, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Makes it possible the suspension of the fittings adjustable. For simple and electrified ceiling roses go to page 336-337.
SV919 Ø16x44
44
Ø 16
50
44
Ø 16
44
Ø 16
Kit attacco a soffittoIn poliammide, di colore bianco, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
Ceiling connection kitIn polyamide, white coloured, fixed with screws. Makes it possible to fix the modues staright onto the ceiling.
186 Plexiform
ASTRO
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta o, solo per apparecchi a fluorescenza, con emissione diretta/indiretta (biemissione).Installazione a soffitto o sospensione. Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso.Riflettore in alluminio speculare (fluorescenza).Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I moduli bilampada fluorescenti sono cablati con un unico reattore.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting for indoor use, direct or, only for fluorescent fittings, direct/indirect light only (bi-emission).Ceiling or suspension mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body.Laminated specular aluminium reflector (fluorescent only).Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Fluorescent two-lamps modules are wired with one single ballast.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
SistemaSystem
SoffittoCeiling
SospensioneSuspension
Plexiform 187
ASTROKIT SOSPENSIONESUSPENSION KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
70
80
90
100
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Astro FLUO T5 108W 336
Astro LED 40W 316 10
20
30
40
50
60
Astro Fluo T5108W
Astro LED40W
37%consumo
consumption
100%consumo
consumption
EnergySaving
63%
GIUNTO LINEARELINEAR JOINT
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
SCHERMO DIFFUSOREDIFFUSER
CORPO ILLUMINANTE SINGOLOSINGLE FITTING
CORPO ILLUMINANTE IN LINEAIN LINE FITTING
188 Plexiform
ASTRO
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi alveolari, schermi diffusori oppure con ottiche antiriflesso- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Louvres, diffusers or with antireflection optics - Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi alveolari, schermi diffusori oppure con ottiche antiriflesso- Giunti lineari e/o giunti angolari- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Louvres, diffusers or with antireflection optics- Linear joints and/or angle joints- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare un sistema con 3 ASTRO LED 40W di colore nero occorrono:To create a system with 3 ASTRO LED 40W black colour you require:
ASTRO 40W inizio linea 1 pezziASTRO 40W start line pieces
ASTRO 40W intermedio 1 pezziASTRO 40W intermediate pieces
ASTRO 40W fine linea 1 pezziASTRO 40W end line pieces
Schermi diffusori 3 pezziDiffusers pieces
Giunti lineari 2 pezziLinear Joints pieces
Kit sospensione 3 pezziSuspension kit pieces
AS11301
AS12301
AS13301
SV84801
SV87001
SV921
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
ESEMPIO DI SISTEMASYSTEM EXAMPLE
ASTRO inizio lineaASTRO start line
Schermo diffusoreDiffuser
ASTRO fine lineaASTRO end line
Schermo diffusoreDiffuser
ASTRO intermedioASTRO intermediate
Schermo diffusoreDiffuser
Giunto lineareLinear joint
Giunto lineareLinear joint
Kit sospensioneSuspension kit
Kit sospensioneSuspension kit
Kit sospensioneSuspension kit
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 189
ASTRO
Versione a LED con schermo diffusoreLED version with diffuser
40
235
Ottica antiriflesso
Antireflection optic
Schermo alveolare opale
Opal louvre
Schermo alveolare metalizzato
Metallized louvre
190 Plexiform
ASTRO
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
AS101XX 20W 2500 lm 3000K 625x235x40 2,4 kgAS102XX 20W 2500 lm 4000K 625x235x40 2,4 kgAS103XX 40W 5000 lm 3000K 1165x235x40 3,6 kgAS104XX 40W 5000 lm 4000K 1165x235x40 3,6 kgAS105XX 60W 7500 lm 3000K 1705x235x40 4,8 kgAS106XX 60W 7500 lm 4000K 1705x235x40 4,8 kg
LED A LUCE DIRETTA SINGOLO - DIRECT LIGHT LED SINGLE
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
AS111XX 20W 2500 lm 3000K 610x235x40 2,3 kgAS112XX 20W 2500 lm 4000K 610x235x40 2,3 kgAS113XX 40W 5000 lm 3000K 1150x235x40 3,5 kgAS114XX 40W 5000 lm 4000K 1150x235x40 3,5 kgAS115XX 60W 7500 lm 3000K 1690x235x40 4,6 kgAS116XX 60W 7500 lm 4000K 1690x235x40 4,6 kg
LED A LUCE DIRETTA INIZIO LINEA - DIRECT LIGHT LED START LINE
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
AS121XX 20W 2500 lm 3000K 590x235x40 2,2 kgAS122XX 20W 2500 lm 4000K 590x235x40 2,2 kgAS123XX 40W 5000 lm 3000K 1130x235x40 3,3 kgAS124XX 40W 5000 lm 4000K 1130x235x40 3,3 kgAS125XX 60W 7500 lm 3000K 1670x235x40 4,4 kgAS126XX 60W 7500 lm 4000K 1670x235x40 4,4 kg
LED A LUCE DIRETTA INTERMEDIO - DIRECT LIGHT LED INTERMEDIATE
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
AS131XX 20W 2500 lm 3000K 610x235x40 2,3 kgAS132XX 20W 2500 lm 4000K 610x235x40 2,3 kgAS133XX 40W 5000 lm 3000K 1150x235x40 3,5 kgAS134XX 40W 5000 lm 4000K 1150x235x40 3,5 kgAS135XX 60W 7500 lm 3000K 1690x235x40 4,6 kgAS136XX 60W 7500 lm 4000K 1690x235x40 4,6 kg
LED A LUCE DIRETTA FINE LINEA - DIRECT LIGHT LED END LINE
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
IP20 IK05
IP20 IK05
IP20 IK05
IP20 IK05
Da usare in combinazione con gli apparecchi intermedi e fine linea.
To be used only with intermediate and end line lighting fixture.
Da usare in combinazione con gli apparecchi inizio e fine linea.
To be used only with start and end line lighting fixture.
Da usare in combinazione con gli apparecchi inizio linea ed intermedi.
To be used only with start line and intermediate lighting fixture.
NEW
NEW
NEW
NEW
Plexiform 19101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
ASTRO
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOAS141XX 2x24W 615x235x40 2,6 kgAS142XX 2x39W 915x235x40 3,2 kgAS143XX 2x49W 1515x235x40 4,4 kgAS144XX 2x54W 1215x235x40 3,8 kgAS145XX 2x80W 1515x235x40 4,4 kg
HEAS146XX 2x14W 615x235x40 2,6 kgAS147XX 2x21W 915x235x40 3,2 kgAS148XX 2x28W 1215x235x40 3,8 kgAS149XX 2x35W 1515x235x40 4,4 kg
FLUORESCENTE T5 A LUCE DIRETTA SINGOLO - DIRECT LIGHT T5 FLUORESCENT SINGLE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOAS151XX 2x24W 600x235x40 2,4 kgAS152XX 2x39W 900x235x40 3,0 kgAS153XX 2x49W 1500x235x40 4,2 kgAS154XX 2x54W 1200x235x40 3,6 kgAS155XX 2x80W 1500x235x40 4,2 kg
HEAS156XX 2x14W 580x235x40 2,4 kgAS157XX 2x21W 880x235x40 3,0 kgAS158XX 2x28W 1180x235x40 3,6 kgAS159XX 2x35W 1480x235x40 4,2 kg
FLUORESCENTE T5 A LUCE DIRETTA INIZIO LINEA - DIRECT LIGHT T5 FLUORESCENT START LINE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOAS161XX 2x24W 580x235x40 2,4 kgAS162XX 2x39W 880x235x40 3,0 kgAS163XX 2x49W 1480x235x40 4,2 kgAS164XX 2x54W 1180x235x40 3,6 kgAS165XX 2x80W 1480x235x40 4,2 kg
HEAS166XX 2x14W 580x235x40 2,4 kgAS167XX 2x21W 880x235x40 3,0 kgAS168XX 2x28W 1180x235x40 3,6 kgAS169XX 2x35W 1480x235x40 4,2 kg
FLUORESCENTE T5 A LUCE DIRETTA INTERMEDIO - DIRECT LIGHT T5 FLUORESCENT INTERMEDIATE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOAS171XX 2x24W 600x235x40 2,4 kgAS172XX 2x39W 900x235x40 3,0 kgAS173XX 2x49W 1500x235x40 4,2 kgAS174XX 2x54W 1200x235x40 3,6 kgAS175XX 2x80W 1500x235x40 4,2 kg
HEAS176XX 2x14W 600x235x40 2,4 kgAS177XX 2x21W 900x235x40 3,0 kgAS178XX 2x28W 1200x235x40 3,6 kgAS179XX 2x35W 1500x235x40 4,2 kg
FLUORESCENTE T5 A LUCE DIRETTA FINE LINEA - DIRECT LIGHT T5 FLUORESCENT END LINE
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
Da usare in combinazione con gli apparecchi intermedi e fine linea.
To be used only with intermediate and end line lighting fixture.
IP20 IK05
IP20 IK05
IP20 IK05
IP20 IK05
Da usare in combinazione con gli apparecchi inizio e fine linea.
To be used only with start and end line lighting fixture.
Da usare in combinazione con gli apparecchi inizio linea ed intermedi.
To be used only with start line and intermediate lighting fixture.
192 Plexiform
ASTRO
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOAS181XX 2x24W 615x235x40 2,3 kgAS182XX 2x39W 915x235x40 3,0 kgAS183XX 2x49W 1515x235x40 4,3 kgAS184XX 2x54W 1215x235x40 3,6 kgAS185XX 2x80W 1515x235x40 4,3 kg
HEAS186XX 2x14W 615x235x40 2,3 kgAS187XX 2x21W 915x235x40 3,0 kgAS188XX 2x28W 1215x235x40 3,6 kgAS189XX 2x35W 1515x235x40 4,3 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA SINGOLO - DIRECT/INDIRECT LIGHT T5 FLUO SINGLE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOAS191XX 2x24W 600x235x40 2,2 kgAS192XX 2x39W 900x235x40 2,8 kgAS193XX 2x49W 1500x235x40 4,1 kgAS194XX 2x54W 1200x235x40 3,5 kgAS195XX 2x80W 1500x235x40 4,1 kg
HEAS196XX 2x14W 600x235x40 2,2 kgAS197XX 2x21W 900x235x40 2,8 kgAS198XX 2x28W 1200x235x40 3,5 kgAS199XX 2x35W 1500x235x40 4,1 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA INIZIO LINEA - DIRECT/INDIRECT LIGHT T5 FLUO START LINE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOAS201XX 2x24W 580x235x40 2,1 kgAS202XX 2x39W 880x235x40 2,8 kgAS203XX 2x49W 1480x235x40 4,1 kgAS204XX 2x54W 1180x235x40 3,5 kgAS205XX 2x80W 1480x235x40 4,1 kg
HEAS206XX 2x14W 580x235x40 2,1 kgAS207XX 2x21W 880x235x40 2,8 kgAS208XX 2x28W 1180x235x40 3,5 kgAS209XX 2x35W 1480x235x40 4,1 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA INTERMEDIO – DIRECT/INDIRECT LIGHT T5 FLUO INTERMEDIATE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOAS211XX 2x24W 600x235x40 2,2 kgAS212XX 2x39W 900x235x40 2,8 kgAS213XX 2x49W 1500x235x40 4,1 kgAS214XX 2x54W 1200x235x40 3,5 kgAS215XX 2x80W 1500x235x40 4,1 kg
HEAS216XX 2x14W 600x235x40 2,2 kgAS217XX 2x21W 900x235x40 2,8 kgAS218XX 2x28W 1200x235x40 3,5 kgAS219XX 2x35W 1500x235x40 4,1 kg
FLUO T5 A LUCE DIRETTA/INDIRETTA FINE LINEA – DIRECT/INDIRECT LIGHT T5 FLUO END LINE
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 167.96 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 85.60%
Data: 08-07-2009
Asimmetrico
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 167.96 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 85.60%
Data: 08-07-2009
Asimmetrico
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 167.96 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 85.60%
Data: 08-07-2009
Asimmetrico
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 167.96 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 85.60%
Data: 08-07-2009
Asimmetrico
Da usare in combinazione con gli apparecchi intermedi e fine linea.Compreso di schermo diffusore superiore.
To be used only with intermediate and end line lighting fixture.Upper diffuser included.
IP20 IK05
Da usare in combinazione con gli apparecchi inizio e fine linea.Compreso di schermo diffusore superiore.
To be used only with start and end line lighting fixture.Upper diffuser included.
IP20 IK05
Da usare in combinazione con gli apparecchi inizio linea ed intermedi.Compreso di schermo diffusore superiore.
To be used only with start line and intermediate lighting fixture.Upper diffuser included.
IP20 IK05
IP20 IK05
Compreso di schermo diffusore superiore.
Upper diffuser included.
Plexiform 19301 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
ASTRO
194 Plexiform
ASTRO
40
415-615
Plexiform 19501 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
ASTRO
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
AS221XX 16W 2100 lm 3000K 415x415x40 3,8 kgAS222XX 16W 2100 lm 4000K 415x415x40 3,8 kg
AS231XX 50W 6000 lm 3000K 615x615x40 5,0 kgAS232XX 50W 6000 lm 4000K 615x615x40 5,0 kg
LED A LUCE DIRETTA SINGOLO - DIRECT LIGHT LED SINGLE
Compreso di schermo diffusore e di kit attacco a soffitto. Se si necessita di sospensione ordinarla a parte.
Diffuser and ceiling connection kit included. If suspended order suspension accessories separately.
Compreso di schermo diffusore e di kit attacco a soffitto. Se si necessita di sospensione ordinarla a parte.
Diffuser and ceiling connection kit included. If suspended order suspension accessories separately.
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOAS241XX 4x24W 615x615x40 5,4 kg
HEAS242XX 4x14W 615x615x40 5,4 kg
FLUORESCENTE T5 A LUCE DIRETTA SINGOLO - DIRECT LIGHT T5 FLUORESCENT SINGLE
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOAS251XX 4x24W 615x615x40 5,3 kg
HEAS252XX 4x14W 615x615x40 5,3 kg
FLUORESCENTE T5 A LUCE DIR./INDIR. SINGOLO – DIR./INDIR. LIGHT T5 FLUORESCENT SINGLE
IP40 IK05
IP40 IK05
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
596mm x 596mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6000.00 lm
Massimo 337.03 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 95.44%
Data: 16-07-2014
Doppia Simmetria
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
630mm x 630mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 7000.00 lm
Massimo 203.29 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 56.85%
Data: 10-07-2009
Asimmetrico
Compreso di schermo diffusore superiore e inferiore.Ordinare a parte la sospensione.
Upper and bottom diffuser included. Order apart suspension kit.
IP40 IK05
70
70
140
140
210
210
280
280
350
350
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1100mm x 100mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 2600.00 lm
Massimo 316.13 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 125.18%
Data: 18-07-2014
Doppia Simmetria
NEW
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
196 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
ASTROAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
SV850XX 538x158x9-2x14/24WSV851XX 838x158x9-2x21/39WSV852XX 1138x158x9-2x28/54WSV853XX 1438x158x9 2x35/49/80W
SV847XX 548x158x9 -20WSV848XX 1088x158x9 -40WSV849XX 1628x158x9 -60W
SV890 540x152x40-20WSV891 1080x152x40-40WSV892 1620x152x40-60W
SV840 540x150x12 -20WSV841 1080x150x12 -40WSV842 1620x150x12 -60W
SV893 530x152x40-2x14/24WSV894 830x152x40-2x21/39WSV895 1130x152x40-2x28/54WSV896 1430x152x40-2x35/49/80W
SV843 530x150x12 -2x14/24WSV844 830x150x12 -2x21/39WSV845 1130x150x12 -2x28/54WSV846 1430x150x12 -2x35/49/80W
SV833 540x150x12 -20WSV834 1080x150x12 -40WSV835 1620x150x12 -60W
540-1080-16
20
152
40
540-1080-16
20
150
12
540-1080-16
20
150
12
548-1088-16
28
158
9
158
9
538-838-1138-14
38
150
12
530-830-1130-14
30
530-830-1130-14
30
152
40
Schermo diffusore microprismato per LED In policarbonato autoestinguente con cornice in profilo di alluminio verniciato dello stesso colore dell’apparecchio, fissaggio a scatto. Permette di ridurre l’abbagliamento e consente di ottenere il grado di protezione IP40.
LED microprismatic diffuserIn self-extinguishing polycarbonate with powder coat aluminium profile frame (same colour of the fitting), snap on fixture. Reduces dozzle and makes possible to obtein IP40 protection degree of the fitting.
Schermo diffusore microprismato per T5 In policarbonato autoestinguente con cornice in profilo di alluminio verniciato dello stesso colore dell’apparecchio, fissaggio a scatto. Permette di ridurre l’abbagliamento e consente di ottenere il grado di protezione IP40.
T5 microprismatic diffuserIn self-extinguishing polycarbonate with powder coat aluminium profile frame (same colour of the fitting), snap on fixture. Reduces dozzle and makes possible to obtein IP40 protection degree of the fitting.
Ottica antiriflesso per LEDLamellare in alluminio speculare preanodizzato, antiriflesso, a bassissima iridescenza, a bassa luminanza e ad alto rendimento, fissaggio a scatto (sporgenza dal modulo = 6 mm). Adatta per uffici con videoterminali.
LED antireflection optic Laminated specular pre-anodized aluminium, antiglare with low iridescence, low luminance and high efficiency, snap on fixture (proturing 6 mm from the module). Suitable for offices with VDUs.
Ottica antiriflesso per T5 Lamellare in allumino speculare preanodizzato, antiriflesso a bassissima iridescenza. Struttura in profilo di alluminio verniciata dello stesso colore dell’apparecchio, fissaggio a scatto (sporgenza dal modulo = 6 mm). Adatta per uffici con videoterminali.
T5 glossy aluminium antireflection opticLaminated specular pre-anodized aluminium antiglare with low iridescence. Profile powder coat in same colour of fitting, snap on fixture (proturing 6 mm from the module). Suitable for offices with VUDs.
Kit schermi alveolari metallizzati per T5 In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
T5 metallized louvre kit In self-extinguishing polycarbonate. Snap on fixture. Reduces dozzle.
Kit schermi alveolari opali per LED In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
LED opal louvre kit In self-extinguishing polycarbonate. Snap on fixture. Reduces dozzle.
Kit schermi alveolari metallizzati per LED In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
LED metallized louvre kit In self-extinguishing polycarbonate. Snap on fixture. Reduces dozzle.
Plexiform 19701 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
ASTROAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
SV922 Ø16x44
Giunto lineare In lamiera di acciaio zincata e profilo di alluminio, fissaggio con viti. Verniciato negli stessi colori dei moduli. Permette di realizzare una giunzione “invisibile” di due moduli in linea.
Linear jointIn galvanized steel aluminium profile, fixed with screws. Powder coat in same colour of modules. It makes possible to create an “invisible” joint of two modules in line.
SV870XX
Kit schermi alveolari opali per T5 In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
T5 Opal louvre kit In self-extinguishing polycarbonate. Snap on fixture. Reduces dozzle.
SV836 530x150x12 -2x14/24WSV837 830x150x12 -2x21/39WSV838 1130x150x12 -2x28/54WSV839 1430x150x12 -2x35/49/80W
150
12
530-830-1130-14
30
SV827 142x33x23
142
33
23
Giunto angolareProfilo di alluminio, fissaggio con viti. Verniciato negli stessi colori dei moduli. Permette di realizzare una giunzione a “L” (90°) tra due moduli.
90° angle jointAluminium profile, fixed with screws. Powder coat in same colour of modules. It makes possible to create a “L” (90°) joint between the modules.
AS802XX 315x315x40
315
40
50
315
Kit sospensione archetto per apparecchi quadratiDue funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Arc suspension kit for square fittingsPair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
Kit sospensione archetto Due funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Arc suspension kit Pair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
SV921 Ø16x44
Kit sospensione doppia Due coppie di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Double suspension kit Two pairs of brass chrome ceiling rose, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Makes it possible the suspension of the fittings adjustable. For simple and electrified ceiling roses go to page 336-337.
SV919 Ø16x44
44
Ø 16
44
Ø 16
44
Ø 16
Kit attacco a soffittoIn poliammide, di colore bianco, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
Ceiling connection kitIn polyamide, white coloured, fixed with screws. Makes it possible to fix the modues staright onto the ceiling.
198 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni. ad emissione diretta o diretta/indiretta.Installazione a soffitto ed a sospensione. Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso.Riflettore in alluminio speculare (fluorescenza).Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting for indoor use direct or direct/indirect.Ceiling mounted and suspension mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body.Laminated specular aluminium reflector (fluorescent only).Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
EKOSSistemaSystem
SoffittoCeiling
SospensioneSuspension
UGR<19
Plexiform 199
EKOS
CORPO ILLUMINANTESINGLE MODULE
KIT SOSPENSIONESUSPENSION KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
70
80
90
100
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Ekos FLUO PAR T8 72W 328
Ekos LED 40W 312 10
20
30
40
50
60
Ekos Fluo PAR T872W
Ekos LED40W
56%consumo
consumption
100%consumo
consumption
EnergySaving
44%
GIUNTO LINEARELINEAR JOINT
KIT TESTATE TERMINALIEND CAPS KIT
UGR<19
200 Plexiform
EKOS
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi lamellari (l’ottica antiriflesso è già compresa nella versione parabolica)- Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Louvres (parabolic version supplied with antireflection optic)- End cap kit- Suspension kit and/or ceiling connection
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi lamellari (l’ottica antiriflesso è già compresa nella versione parabolica)- Giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Louvres (parabolic version supplied with antireflection optic)- Linear joints and/or angle joints- End cap kit- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
75
220
Versione a LED con schermo lamellare opaleLED version with opal louvres
Schermo lamellare metalizzatoOttica antiriflesso
Antireflection optic Metallized louvre
Per realizzare un sistema con 4 EKOS LED 40W di colore nero occorrono:To create a system with 4 EKOS LED 40W black colour you require:
EKOS 40W luce diretta 4 pezziEKOS 40W direct light pieces
Kit schermi lamellari 4 pezziLouvre kit pieces
Giunti lineari 3 pezziLinear joints pieces
Kit testate terminali 1 pezziEnd cap kit pieces
Kit sospensione 4 pezziSuspensions kit pieces
EK10301
EK811
EK80201
EK80101
SV919
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 20101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
EKOS
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
EK101XX 20W 2500 lm 3000K 590x220x75 2,0 kgEK102XX 20W 2500 lm 4000K 590x220x75 2,0 kgEK103XX 40W 5000 lm 3000K 1130x220x75 3,2 kgEK104XX 40W 5000 lm 4000K 1130x220x75 3,2 kgEK105XX 60W 7500 lm 3000K 1670x220x75 4,4 kgEK106XX 60W 7500 lm 4000K 1670x220x75 4,4 kg
LED A LUCE DIRETTA - DIRECT LIGHT LED
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
EK111XX 1x18W 750x220x75 2,5 kgEK112XX 1x36W 1350x220x75 3,9 kgEK113XX 1x58W 1650x220x75 4,6 kg
EK114XX 2x18W 750x220x75 2,6 kgEK115XX 2x36W 1350x220x75 4,1 kgEK116XX 2x58W 1650x220x75 4,8 kg
FLUORESCENTE T8 A LUCE DIRETTA - DIRECT LIGHT T8 FLUORESCENT
I moduli bilampada sono cablati con unico reattore.Coperture: 84+84 mm.
The two-lamps modules are wired with one single ballast.Covers: 84+84 mm.
Coperture: 25+25 mm.Covers: 25+25 mm.
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
EK121XX 1x18W 750x220x75 2,3 kgEK122XX 1x36W 1350x220x75 3,6 kgEK123XX 1x58W 1650x220x75 4,3 kg
EK124XX 2x18W 750x220x75 2,5 kgEK125XX 2x36W 1350x220x75 3,8 kgEK126XX 2x58W 1650x220x75 4,4 kg
I moduli bilampada sono cablati con unico reattore.I moduli sono completi di schermo diffusore superiore in policarbonato autoestinguente.Coperture: 84+84 mm.
The two-lamps modules are wired with one single ballast.Modules have upper diffuser in self-extinguishing polycarbonate.Covers: 84+84 mm.
FLUORESCENTE T8 A LUCE DIRETTA/INDIRETTA - DIRECT/INDIRECT LIGHT T8 FLUORESCENT
IP20 IK05
IP20 IK05
IP20 IK05
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
60
60
120
180
240
300
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1350mm x 220mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 290.43 cd/klm
Posizione C=0.00 G=15.00
Rendimento: 69.62%
Data: 06-11-1998
Doppia Simmetria
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1350mm x 220mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 192.12 cd/klm
Posizione C=0.00 G=20.00
Rendimento: 81.82%
Data: 07-04-1997
Doppia Simmetria
NEW
202 Plexiform
EKOS
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
EK131XX 20W 2500 lm 3000K 590x220x75 2,2 kgEK132XX 20W 2500 lm 4000K 590x220x75 2,2 kgEK133XX 40W 5000 lm 3000K 1130x220x75 3,5 kgEK134XX 40W 5000 lm 4000K 1130x220x75 3,5 kgEK135XX 60W 7500 lm 3000K 1670x220x75 4,7 kgEK136XX 60W 7500 lm 4000K 1670x220x75 4,7 kg
LED A LUCE DIRETTA PARABOLICO - DIRECT LIGHT PARABOLIC LED
Completi di ottiche paraboliche UGR<19, adatte per uffici con videoterminali.Coperture: 25+25 mm.
Supplied with optics UGR<19, suitable for offices with VDUs.Covers: 25+25 mm.
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEK141XX 2x24W 700x220x75 2,3 kgEK142XX 2x39W 1000x220x75 3,1 kgEK143XX 2x49W 1600x220x75 4,8 kgEK144XX 2x54W 1300x220x75 3,9 kgEK145XX 2x80W 1600x220x75 4,8 kg
HEEK146XX 2x14W 700x220x75 2,3 kgEK147XX 2x21W 1000x220x75 3,1 kgEK148XX 2x28W 1300x220x75 3,9 kgEK149XX 2x35W 1600x220x75 4,8 kg
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEK151XX 2x24W 700x220x75 2,1 kgEK152XX 2x39W 1000x220x75 2,8 kgEK153XX 2x49W 1600x220x75 4,3 kgEK154XX 2x54W 1300x220x75 3,5 kgEK155XX 2x80W 1600x220x75 4,3 kg
HEEK156XX 2x14W 700x220x75 2,1 kgEK157XX 2x21W 1000x220x75 2,8 kgEK158XX 2x28W 1300x220x75 3,5 kgEK159XX 2x35W 1600x220x75 4,3 kg
FLUORESCENTE T5 PARABOLICO DIRETTO - DIRECT LIGHT PARABOLIC T5 FLUORESCENT
I moduli bilampada sono cablati con unico reattore.Completi di ottiche paraboliche UGR<19, adatte per uffici con videoterminali.Coperture: 84+84 mm.
The two-lamps modules are wired with one single ballast.Supplied with optics UGR<19, suitable for offices with VDUs.Covers: 84+84 mm.
FLUO T5 PARABOLICO A LUCE DIRETTA/INDIRETTA - DIRECT/INDIRECT LIGHT PARABOLIC T5 FLUO
I moduli bilampada sono cablati con unico reattore.I moduli sono completi di schermo diffusore superiore in policarbonato autoestinguente e di ottiche paraboliche UGR<19, adatte per uffici con videoterminali. Coperture: 84+84 mm.
The two-lamps modules are wired with one single ballast.Modules have upper diffuser in self-extinguishing polycarbonate and optics UGR<19, suitable for offices with VDUs.Covers: 84+84 mm.
IP20 IK05
IP20 IK05
IP20 IK05
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1130mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 291.66 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 82.02%
Data: 21-07-2014
Doppia Simmetria
60
60
120
180
240
300
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1300mm x 220mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 294.17 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 55.60%
Data: 13-05-2002
Doppia Simmetria
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1300mm x 220mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 188.75 cd/klm
Posizione C=0.00 G=30.00
Rendimento: 69.44%
Data: 12-01-1998
Doppia Simmetria
01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
NEW UGR<19
UGR<19
UGR<19
Plexiform 20301 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
EKOS
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
EK161XX 1x18W 750x220x75 2,8 kgEK162XX 1x36W 1350x220x75 4,3 kgEK163XX 1x58W 1650x220x75 5,2 kg
EK164XX 2x18W 750x220x75 2,9 kgEK165XX 2x36W 1350x220x75 4,5 kgEK166XX 2x58W 1650x220x75 5,4 kg
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
EK171XX 1x18W 750x220x75 2,5 kgEK173XX 1x36W 1350x220x75 3,9 kgEK163XX 1x58W 1650x220x75 4,7 kg
EK174XX 2x18W 750x220x75 2,7 kgEK175XX 2x36W 1350x220x75 4,1 kgEK176XX 2x58W 1650x220x75 4,9 kg
FLUORESCENTE T8 PARABOLICO A LUCE DIRETTA - DIRECT LIGHT PARABOLIC T8 FLUORESCENT
FLUO T8 PARABOLICO A LUCE DIRETTA/INDIRETTA - DIRECT/INDIRECT LIGHT PARABOLIC T8 FLUO
I moduli bilampada sono cablati con unico reattore.Completi di ottiche paraboliche UGR<19, adatte per uffici con videoterminali.Coperture: 84+84 mm.
The two-lamps modules are wired with one single ballast.Supplied with optics UGR<19, suitable for offices with VDUs.Covers: 84+84 mm.
I moduli bilampada sono cablati con unico reattore.I moduli sono completi di schermo diffusore superiore in policarbonato autoestinguente e di ottiche paraboliche UGR<19, adatte per uffici con videoterminali. Coperture: 84+84 mm.
The two-lamps modules are wired with one single ballast.Modules have upper diffuser in self-extinguishing polycarbonate and optics UGR<19, suitable for offices with VDUs.Covers: 84+84 mm.
IP20 IK05
IP20 IK05
60
60
120
180
240
300
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1350mm x 220mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 294.17 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 55.60%
Data: 13-05-2002
Doppia Simmetria
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1350mm x 220mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 188.75 cd/klm
Posizione C=0.00 G=30.00
Rendimento: 69.44%
Data: 12-01-1998
Doppia Simmetria
UGR<19
UGR<19
204 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Kit schermi lamellari metallizziati per T8In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
T8 metallized louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Kit schermi lamellare opali per LED In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
LED opal louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
EKOS Accessori Accessories
Kit schermi lamellare opali per T8 In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
T8 opal louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit testate terminali verniciateCoppia di testate in policarbonato autoestinguente, verniciate. Fissaggio a scatto. Da usare su moduli singoli o sugli ultimi moduli della linea.
Powder coat end cap kitPair of end caps in self-extinghuishing polycarbonate, powder coat. Snap on fixture. To be used on single modules or on the last module of the line.
EK801XX 39x220x75
Kit schermi lamellari metallizzati per LED In policarbonato autoestinguente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
LED metallized louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
EK810 540x150x12 -20WEK811 1080x150x12 -40WEK812 1620x150x12 -60W
EK813 580x150x12 - 1/2x18WEK814 1180x150x12 - 1/2x36WEK815 1480x150x12 - 1/2x58W
EK807 580x150x12 - 1/2x18WEK808 1180x150x12 - 1/2x36WEK809 1480x150x12 - 1/2x58W
EK804 540x150x12 -20WEK805 1080x150x12 -40WEK806 1620x150x12 -60W
540-1080-16
20
150
12
540-1080-16
20
150
12
580-1180-14
80
150
12
580-1180-14
80
150
12
75
220
39
Kit sospensione archetto Due funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Arc suspension kit Pair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
SV921 Ø16x44
Kit sospensione doppia Due coppie di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Double suspension kit Two pairs of brass chrome ceiling rose, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Makes it possible the suspension of the fittings adjustable. For simple and electrified ceiling roses go to page 336-337.
SV919 Ø16x44
44
Ø 16
44
Ø 16
Plexiform 20501 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
EKOSAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Giunto lineare verniciatoIn policarbonato autoestinguente, verniciato. Permette di realizzare una giunzione in linea tra due moduli.
Powder coat linear jointIn self-extinguishing polycarbonate, powder coat. Used to make a straight joint between two modules.
EK802XX 10x220x75
EK803XX 230x230x75 Giunto angolare verniciato In policarbonato autoestinguente, verniciato. Permette di realizzare una giunzione a “L”(90°) tra due moduli.
Powder coat 90° angle joint In self-extinguishing polycarbonate, powder coat. Used to make “L”(90°) joint between two modules.
SV827 142x33x23
142
3323
75
220
10
230 230
75
Kit attacco a soffittoIn poliammide, di colore bianco, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
Ceiling connection kitIn polyamide, white coloured, fixed with screws. Makes it possible to fix the modues staright onto the ceiling.
206 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta.Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso.Riflettore in alluminio speculare (fluorescenza).Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 1547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting direct light for indoor use.Ceiling or suspension mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body.Laminated specular aluminium reflector (fluorescent only).Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
DELTA DIRETTO
SistemaSystem
SoffittoCeiling
SospensioneSuspension
Plexiform 207
DIRETTO DELTA
70
80
90
100
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Delta diretta FLUO T5 56W 231
Delta diretta LED 40W 290 10
20
30
40
50
60
Delta diretta FLUO T556W
Delta diretta LED40W
71%consumo
consumption
100%consumo
consumption
EnergySaving
29%
CORPO ILLUMINANTELIGHTING FITTING
KIT SOSPENSIONESUSPENSION KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
SCHERMO DIFFUSOREDIFFUSER
SCHERMO LAMELLARELOUVRE
KIT GIUNTO LINEARELINEAR JOINT KIT
KIT TESTATE TERMINALIEND CAPS KIT
208 Plexiform
DELTA DIRETTO
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi lamellari oppure schermi diffusori- Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Louvres or diffusers - End cap kit- Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi lamellari oppure schermi diffusori- Kit giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Louvres or diffusers- Linear joints kit and/or angle joints- End cap kit- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
75
110
Versione a LED con schermo diffusoreLED version with diffuser
Schermo lamellare metalizzatoSchermo lamellare opale
Opal louvre Metallized louvre
Per realizzare un sistema con 4 DELTA LED 40W di colore nero occorrono:To create a system with 4 DELTA LED 40W black colour you require:
DELTA 40W luce diretta 4 pezziDELTA 40W direct light pieces
Schermi diffusori 4 pezziDiffusers pieces
Kit giunti lineari 3 pezziLinear Joints kit pieces
Kit testate terminali 1 pezziEnd caps kit pieces
Kit sospensioni 4 pezziSuspension kit pieces
DL20301
DL826
SV882
DL80201
SV923
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 20901 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
DIRETTO DELTA
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DL201XX 20W 2500 lm 3000K 590x110x75 1,3 kgDL202XX 20W 2500 lm 4000K 590x110x75 1,3 kgDL203XX 40W 5000 lm 3000K 1130x110x75 2,2 kgDL204XX 40W 5000 lm 4000K 1130x110x75 2,2 kgDL205XX 60W 7500 lm 3000K 1670x110x75 3,1 kgDL206XX 60W 7500 lm 4000K 1670x110x75 3,1 kg
LED A LUCE DIRETTA - DIRECT LIGHT LED
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HODL211XX 1x24W 690x110x75 1,4 kgDL212XX 1x39W 990x110x75 1,9 kgDL213XX 1x49W 1590x110x75 2,8 kgDL214XX 1x54W 1290x110x75 2,3 kgDL215XX 1x80W 1590x110x75 2,8 kg
DL216XX 2x24W 690x110x75 1,6 kgDL217XX 2x39W 990x110x75 2,0 kgDL218XX 2x49W 1590x110x75 2,9 kgDL219XX 2x54W 1290x110x75 2,5 kgDL220XX 2x80W 1590x110x75 2,9 kg
HEDL221XX 1x14W 690x110x75 1,4 kgDL222XX 1x21W 990x110x75 1,9 kgDL223XX 1x28W 1290x110x75 2,3 kgDL224XX 1x35W 1590x110x75 2,8 kg
DL225XX 2x14W 690x110x75 1,6 kgDL226XX 2x21W 990x110x75 2,0 kgDL227XX 2x28W 1290x110x75 2,5 kgDL228XX 2x35W 1590x110x75 2,9 kg
FLUORESCENTE T5 A LUCE DIRETTA - DIRECT LIGHT T5 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
DL231XX 1x18W 750x110x75 1,6 kgDL232XX 1x36W 1350x110x75 2,4 kgDL233XX 1x58W 1650x110x75 2,9 kg
DL234XX 2x18W 750x110x75 1,7 kgDL235XX 2x36W 1350x110x75 2,6 kgDL236XX 2x58W 1650x110x75 3,1 kg
FLUORESCENTE T8 A LUCE DIRETTA - DIRECT LIGHT T8 FLUORESCENT
IP20 IK05
IP20 IK05
IP20 IK05
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
90
270
180
1290mm x 110mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 10000.00 lm
Massimo 261.97 cd/klm
Posizione C=0.00 G=30.00
Rendimento: 60.61%
Data: 01-08-2005
Simmetrico 0-180
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1350mm x 110mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 236.08 cd/klm
Posizione C=0.00 G=20.00
Rendimento: 68.51%
Data: 17-03-1997
Doppia Simmetria
Coperture: 25+25 mm.Covers: 25+25 mm.
I moduli bilampada sono cablati con unico reattore.Coperture: 84+84 mm.
The two-lamps modules are wired with one single ballast.Covers: 84+84 mm.
II moduli bilampada sono cablati con unico reattore.Coperture: 84+84 mm.
The two-lamps modules are wired with one single ballast.Covers: 84+84 mm.
NEW
210 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Kit schermi lamellari metallizzati per LEDIn policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
Metallized LED louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle..
Kit schermi lamellari metallizzati per T5 In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
Metallized T5 louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Kit schermi lamellari metallizzati per T8 In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
Metallized T8 louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Schermo diffusore opale per LED In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
Opal LED diffuser In internally splined self-extinguishing polycarbonate, snap on fixture. Reduces dozzle. Makes it possible to obtein IP40 degree of protection for fittings.
Schermo diffusore per T5 In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
T5 diffuser In internally splined self-extinguishing polycarbonate, snap on fixture. Reduces dozzle. Makes it possible to obtein IP40 degree of protection for fittings.
Schermo diffusore per T8 In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
T8 diffuser In internally splined self-extinguishing polycarbonate, snap on fixture. Reduces dozzle. Makes it possible to obtein IP40 degree of protection for fittings.
DELTA DIRETTO Accessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit testate terminali Coppia di testate in policarbonato autoestinguente, fissaggio ad innesto con viti. Da usare su moduli singoli o sugli ultimi moduli della linea.
End cap kitPair of end caps in self-extinguishing polycarbonate, clip on fixture with screws. To be used on single modules or on the last modules of the line.
DL802XX 3x110x92
DL825 540x110x17 -20WDL826 1080x110x17 -40WDL827 1620x110x17 -60W
DL815 540x110x17 -20WDL816 1080x110x17 -40WDL817 1620x110x17 -60W
DL832 580x110x17 - 1/2x18WDL833 1180x110x17 - 1/2x36WDL834 1480x110x17 - 1/2x58W
DL822 580x110x17 - 1/2x18WDL823 1180x110x17 - 1/2x36WDL824 1480x110x17 - 1/2x58W
DL828 520x110x17 - 1/2x14/24WDL829 820x110x17 - 1/2x21/39WDL830 1120x110x17 - 1/2x28/54WDL831 1420x110x17 1/2x35/49/80W
DL818 520x110x17 - 1/2x14/24WDL819 820x110x17 - 1/2x21/39WDL820 1120x110x17 - 1/2x28/54WDL821 1420x110x17 1/2x35/49/80W
110
540-1080-1620
17
110
520-820-1120-1420
17
110
580-1180-1480
17
520-820-1120-14
20
110
17
540-1080-16
20
110
17
580-1180-14
80
110
17
92
110
3
Plexiform 21101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
DIRETTO DELTAAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit schermi lamellari opali per T8 In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
Opal T8 louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Kit attacco a soffitto In poliammide, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
Ceiling connection kitIn polyamide, fixed with screws. Makes it possible to fix the modules straight onto the ceiling.
DL80401 Ø35x27 - Nero/BlackDL80402 Ø35x27 - Bianco/White
Kit schermi lamellari opali per LED In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
Opal LED louvre kit In self-extinguishing polycarbonte, snap on fixture. Reduces dozzle
Kit schermi lamellari opali per T5 In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
Opal T5 louvre kitIn self-extinguishing polycarbonte, snap on fixture. Reduces dozzle.
SV923 Ø16x44
SV882 60x21x4 Kit giunto lineare a scomparsa In lamiera di acciaio zincata, fissaggio con viti. Permette di realizzare una giunzione “invisibile” di due moduli.
Invisible linear joint kit In galvanized steel, fixed with screws. It makes possible to create an “invisible” joint of two modules in line.
Giunto angolare verniciato In policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione a “L” (90°) tra due moduli.
Powder coat 90° angle joint In self-extinguishing polycarbonate, clip on fixture with screws. Designed to create an “L” (90°) joint between two modules.
DL803XX 125x125x92
DL808 520x110x17 - 1/2x14/24WDL809 820x110x17 - 1/2x21/39WDL810 1120x110x17 - 1/2x28/54WDL811 1420x110x17 1/2x35/49/80W
DL805 540x110x17 -20WDL806 1080x110x17 -40WDL807 1620x110x17 -60W
DL812 580x110x17 - 1/2x18WDL813 1180x110x17 - 1/2x36WDL814 1480x110x17 - 1/2x58W
520-820-1120-14
20
110
17
540-1080-16
20
110
17
580-1180-14
80
110
1727
Ø35
4
6021
125 125
92
Kit sospensioneCoppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kit Pair of brass chrome ceiling rose, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Makes it possible the suspension of the fittings adjustable. For simple and electrified ceiling roses go to page 336-337.
44
Ø 16
212 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione indiretta.Installazione a sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso.Riflettore in alluminio speculare (fluorescenza).Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting direct light for indoor use, indirect light.Suspension mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body.Laminated specular aluminium reflector (fluorescent only).Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
DELTA INDIRETTO
SistemaSystem
SospensioneSuspension
Plexiform 213
INDIRETTO DELTA
70
80
90
100
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Delta indiretta FLUO T5 36W 231
Delta indiretta LED 40W 290 10
20
30
40
50
60
Delta diretta FLUO T556W
Delta diretta LED40W
71%consumo
consumption
100%consumo
consumption
EnergySaving
29%
KIT SOSPENSIONESUSPENSION KIT
SCHERMO DIFFUSOREDIFFUSER
CORPO ILLUMINANTELIGHTING FITTING
KIT GIUNTO LINEARELINEAR JOINT KIT
KIT TESTATE TERMINALIEND CAPS KIT
214 Plexiform
DELTA INDIRETTO
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori- Kit testate terminali- kit sospensione
SINGLE MOUNTING All fittings must be completed with:- Diffusers - End cap kit- Suspension kit
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi diffusori- Giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione
IN-LINE MOUNTING All fittings must be completed with:- Diffusers- Linear joints and/or angle joints- End cap kit- Suspension kit
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
75
110
Per realizzare un sistema con 4 DELTA LED 40W di colore nero occorrono:To create a system with 4 DELTA LED 40W black colour you require:
DELTA 40W 4 pezziDELTA 40W pieces
Schermi diffusori 4 pezziDiffusers pieces
Giunti lineari 3 pezziLinear Joints pieces
Kit testate terminali 1 pezziEnd caps kit pieces
Kit sospensioni 4 pezziSuspension kit pieces
DL10301
DL846
SV882
DL80101
SV924
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 21501 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
INDIRETTO DELTA
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DL101XX 20W 2500 lm 3000K 590x110x75 1,2 kgDL102XX 20W 2500 lm 4000K 590x110x75 1,2 kgDL103XX 40W 5000 lm 3000K 1130x110x75 2,1 kgDL104XX 40W 5000 lm 4000K 1130x110x75 2,1 kgDL105XX 60W 7500 lm 3000K 1670x110x75 3,0 kgDL106XX 60W 7500 lm 4000K 1670x110x75 3,0 kg
LED A LUCE INDIRETTA - INDIRECT LIGHT LED
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
DL131XX 1x18W 750x110x75 1,5 kgDL132XX 1x36W 1350x110x75 2,3 kgDL133XX 1x58W 1650x110x75 2,8 kg
DL134XX 2x18W 750x110x75 1,6 kgDL135XX 2x36W 1350x110x75 2,5 kgDL136XX 2x58W 1650x110x75 3,0 kg
I moduli bilampada sono cablati con unico reattore.
The two-lamps modules are wired with one single ballast.
FLUORESCENTE T8 A LUCE INDIRETTA - INDIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HODL111XX 1x24W 690x110x75 1,3 kgDL112XX 1x39W 990x110x75 1,8 kgDL113XX 1x49W 1590x110x75 2,7 kgDL114XX 1x54W 1290x110x75 2,2 kgDL115XX 1x80W 1590x110x75 2,7 kg
DL116XX 2x24W 690x110x75 1,5 kgDL117XX 2x39W 990x110x75 1,9 kgDL118XX 2x49W 1590x110x75 2,8 kgDL119XX 2x54W 1290x110x75 2,4 kgDL120XX 2x80W 1590x110x75 2,8 kg
HEDL121XX 1x14W 690x110x75 1,3 kgDL122XX 1x21W 990x110x75 1,8 kgDL123XX 1x28W 1290x110x75 2,2 kgDL124XX 1x35W 1590x110x75 2,7 kg
DL125XX 2x14W 690x110x75 1,5 kgDL126XX 2x21W 990x110x75 1,9 kgDL127XX 2x28W 1290x110x75 2,4 kgDL128XX 2x35W 1590x110x75 2,8 kg
FLUORESCENTE T5 A LUCE INDIRETTA - INDIRECT LIGHT T5 FLUORESCENT
I moduli bilampada sono cablati con unico reattore.
The two-lamps modules are wired with one single ballast.
IP20 IK05
IP20 IK05
IP20 IK05
50
50
100
150
200
250
0˚ 60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚
150˚165˚180˚
cd/klm
Angoli Gamma
0
90
270
180
1290mm x 110mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 10000.00 lm
Massimo 239.32 cd/klm
Posizione C=0.00 G=160.00
Rendimento: 65.36%
Data: 01-08-2005
Simmetrico 0-180
50
50
100
150
200
250
0˚ 60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚
150˚165˚180˚
cd/klm
Angoli Gamma
0
90
270
180
1290mm x 110mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 10000.00 lm
Massimo 239.32 cd/klm
Posizione C=0.00 G=160.00
Rendimento: 65.36%
Data: 01-08-2005
Simmetrico 0-180
50
50
100
150
200
250
0˚ 60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚
150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1350mm x 110mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 236.70 cd/klm
Posizione C=0.00 G=155.00
Rendimento: 65.93%
Data: 17-03-1997
Doppia Simmetria
NEW
216 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Schermo diffusore per T5 In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
T5 diffuserIn internally splined self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
DELTA INDIRETTO Accessori Accessories
Schermo diffusore per T8 In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
T8 diffuser In internally splined self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit testate terminali verniciate In policarbonato autoestinguente, fissaggio ad innesto e con viti. Da usare su moduli singoli o sugli ultimi moduli della linea.
Powder coat end cap kit In self-extinguishing polycarbonate, clip on fixture with screws. To be used on single modules or on the last modules of the line.
DL801XX 3x110x75
Kit giunto lineare a scomparsa In lamiera di acciaio zincata, fissaggio con viti. Permette di realizzare una giunzione “invisibile” di due moduli.
Invisible linear joint kit In galvanized steel, fixed with screws. It makes possible to create an “invisible” joint of two modules in line.
SV882 60x21x4
DL845XX 125x125x75 Giunto angolare verniciatoIn policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione a “L” (90°) tra due moduli.
Powder coat 90° angle jointIn self-extinguishing polycarbonate, clip on fixture with screws. Designed to create an “L” (90°) joint between two modules.
Schermo diffusore per LEDIn policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento.
LED diffuserIn internally splined self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
SV924 Ø16x44
DL835 530x110x2 - 20WDL836 1070x110x2 - 40WDL837 1610x110x2 - 60W
DL842 690x110x2 - 1/2x18WDL843 1290x110x2 - 1/2x36WDL844 1590x110x2 - 1/2x58W
DL838 630x110x2 - 1/2x14/24WDL839 930x110x2 - 1/2x21/39WDL840 1230x110x2 - 1/2x28/54WDL841 1530x110x2 - 1/2x35/49/80W
75
110
3
22
110
110
2
110
530-1070-1610
630-930-1230-1530
690-1290-1590
4
6021
125 125
75
Kit sospensioneCoppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kit Pair of brass chrome ceiling rose, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Makes it possible the suspension of the fittings adjustable. For simple and electrified ceiling roses go to page 336-337.
44
Ø 16
218 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta.Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso.Riflettore in alluminio speculare (fluorescenza).Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 112 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting for indoor use, direct light.Ceiling or suspension mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body.Laminated specular aluminium reflector (fluorescent only).Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Our LED, series 5630, are powered by constant current drivers, efficiency 112 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
BETASistemaSystem
SoffittoCeiling
SospensioneSuspension
Plexiform 219
BETA
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Beta FLUO T8 36W 231
Beta LED 36W 290
CORPO ILLUMINANTELIGHTING FITTING
KIT SOSPENSIONESUSPENSION KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
SCHERMO LAMELLARELOUVRE
SCHERMO DIFFUSOREDIFFUSER
GIUNTO LINEARELINEAR JOINT
KIT TESTATE TERMINALIEND CAPS KIT
70
80
90
100
110
120
130
10
20
30
40
50
60
Beta FLUO T836W
Beta LED36W
100%Resa
Luminosa
126%Resa
Luminosa
220 Plexiform
BETA
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi lamellari o schermi diffusori - Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Lowers or diffusers - End cap kit- Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi lamellari o schermi diffusori- Giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Louvres or diffusers- Linear joints and/or angle joints- End cap kit- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Ø70
Versione a LED con schermo diffusoreLED version with diffuser
Schermo lamellare metalizzatoSchermo lamellare opale
Opal louvre Metallized louvre
Per realizzare un sistema con 4 BETA LED 36W di colore nero occorrono:To create a system with 4 BETA LED 36W black colour you require:
BETA 36W luce diretta 4 pezziBETA 36W direct light pieces
Schermi diffusori 4 pezziDiffusers pieces
Giunti lineari 3 pezziLinear Joints pieces
Kit testate terminali 1 pezziEnd caps kit pieces
Kit sospensioni 4 pezziSuspension kit pieces
BT10301
BT823
BT80201
BT80101
SV918
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 22101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
BETA
222 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
BETA
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
BT101XX 18W 2000 lm 3000K 590xØ70 1,1 kgBT102XX 18W 2000 lm 4000K 590xØ70 1,1 kgBT103XX 36W 4000 lm 3000K 1130xØ70 1,7 kgBT104XX 36W 4000 lm 4000K 1130xØ70 1,7 kgBT105XX 54W 6000 lm 3000K 1670xØ70 2,3 kgBT106XX 54W 6000 lm 4000K 1670xØ70 2,3 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
BT111XX 1x18W 990xØ70 1,6 kgBT112XX 1x30W 1290xØ70 1,8 kgBT113XX 1x36W 1590xØ70 2,0 kgBT114XX 1x58W 1890xØ70 2,6 kg
Coperture: 97+313 mm.Covers: 97+313 mm.
FLUORESCENTE T8 A LUCE DIRETTA – DIRECT LIGHT T8 FLUORESCENT
IP20 IK05
IP20 IK05
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1100mm x 65mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4000.00 lm
Massimo 335.58 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 86.11%
Data: 23-07-2014
Doppia Simmetria
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1590mm x 70mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3350.00 lm
Massimo 201.00 cd/klm
Posizione C=0.00 G=20.00
Rendimento: 56.32%
Data: 11-01-1995
Doppia Simmetria
Coperture: 25+25 mm.Covers: 25+25 mm.
NEW
Plexiform 22301 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
224 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Kit schermi lamellari metallizzati per T8In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
T8 metallized louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Kit schermi lamellari opali per T8In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
T8 opal louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Schermo diffusore per LED In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
LED diffuser In internally splined self-extinguishing polycarbonate, snap on fixture. Reduces dozzle. Makes it possible to obtein IP40 degree of protection for fittings.
Schermo diffusore per T8In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
T8 diffuser In internally splined self-extinguishing polycarbonate, snap on fixture. Reduces dozzle. Makes it possible to obtein IP40 degree of protection for fittings.
Kit testate terminali verniciate In policarbonato autoestinguente, fissaggio ad innesto e con viti. Da usare su moduli singoli o sugli ultimi moduli della linea.
Powder coat end cap kit In self-extinghuished polycarbonate, clip on fixture with screws. To be used on single modules or on the last modules of the line.
BETA Accessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit testate terminali In policarbonato autoestinguente, fissaggio ad innesto e con viti. Da usare su moduli singoli o sugli ultimi moduli della linea.
End cap kit In self-extinghuished polycarbonate, clip on fixture with screws. To be used on single modules or on the last modules of the line.
BT80101 Ø 70x3 - Nero/BlackBT80102 Ø 70x3 - Bianco/White
BT804XX Ø 70x3
Kit sospensioneCoppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kit Pair of brass chrome ceiling rose, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Makes it possible the suspension of the fittings adjustable. For simple and electrified ceiling roses go to page 336-337.
SV918 Ø16x44
BT825 580x62x18 - 1x18WBT826 880x62x18 - 1x30WBT827 1180x62x18 - 1x36WBT828 1480x62x18 - 1x58W
BT822 520x62x18 - 18WBT823 1040x62x18 - 36WBT824 1620x62x18 - 54W
BT818 580x62x18 - 1x18WBT819 880x62x18 - 1x30WBT820 1180x62x18 - 1x36WBT821 1480x62x18 - 1x58W
BT811 580x62x18 - 1x18WBT812 880x62x18 - 1x30WBT813 1180x62x18 - 1x36WBT814 1480x62x18 - 1x58W
Ø70
3
Ø70
3
62
520-1040-1620
18
62
580-880-1180-1480
18
62
18
580-880-1180-14
80
62
18
580-880-1180-14
80
44
Ø 16
Plexiform 22501 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
BETAAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit attacco a soffitto In poliammide, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
Ceiling connection kit In polyamide, fixed with screws. Makes it possible to fix the modules straight onto the ceiling.
BT80701 Ø35x27 - Nero/BlackBT80702 Ø35x27 - Bianco/White
Giunto lineare In policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione in linea tra due moduli.
Linear joint In self-extinguishing polycarbonate, clip on fixture with screws. Used to make a straight joint between two modules.
BT80201 Ø 70x12 - Nero/BlackBT80202 Ø 70x12 - Bianco/White
SV828 60x21x4 Kit giunto lineare a scomparsa In lamiera di acciaio zincata, fissaggio con viti. Permette di realizzare una giunzione “invisibile” di due moduli in linea.
Invisible linear joint kit In galvanized steel, fixed with screws. It makes possible to create an “invisible” joint of two modules in line.
Giunto angolare In policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione a “L”(90°) tra due moduli.
Angle joint In self-extinguishing polycarbonate, clip on fixture with screws. Used to make “L”(90°) joint between two modules.
BT80301 106x106xØ 70 - Nero/BlackBT80302 106x106xØ 70 - Bianco/White
Giunto lineare verniciato In policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione in linea tra due moduli.
Powder coat linear joint In self-extinguishing polycarbonate, clip on fixture with screws. Used to make a straight joint between two modules.
BT805XX Ø 70x12
Giunto angolare verniciato In policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione a “L”(90°) tra due moduli.
Powder coat 90° angle joint In self-extinguishing polycarbonate, clip on fixture with screws. Used to make “L”(90°) joint between two modules.
BT806XX 106x106xØ 70
4
6021
27
Ø35
Ø7012
Ø7012
106 106
Ø70
106 106
Ø70
226 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta.Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso.Riflettore in alluminio speculare (fluorescenza).Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 112 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting direct light for indoor use.Ceiling or suspension mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body.Laminated specular aluminium reflector (fluorescent only).Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Our LED, series 5630, are powered by constant current drivers, efficiency 112 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
TRIALSistemaSystem
SoffittoCeiling
SospensioneSuspension
Plexiform 227
TRIAL
CORPO ILLUMINANTELIGHTING FITTING
KIT SOSPENSIONESUSPENSION KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
SCHERMO LAMELLARELOUVRE
SCHERMO DIFFUSOREDIFFUSER
GIUNTO LINEARELINEAR JOINT
KIT TESTATE TERMINALIEND CAPS KIT
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Trial FLUO T8 36W 231
Trial LED 36W 290
70
80
90
100
110
120
130
10
20
30
40
50
60
Trial FLUO T836W
Trial LED36W
100%Resa
Luminosa
126%Resa
Luminosa
228 Plexiform
TRIAL
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi lamellari o schermi diffusori - Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Lowers or diffusers - End cap kit- Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi lamellari o schermi diffusori- Giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Louvres or diffusers- Linear joints and/or angle joints- End cap kit- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
65
85
Versione a LED con schermo diffusoreLED version with diffuser
Schermo lamellare metalizzatoSchermo lamellare opale
Opal louvre Metallized louvre
Per realizzare un sistema con 4 TRIAL LED 36W di colore nero occorrono:To create a system with 4 TRIAL LED 36W black colour you require:
TRIAL 36W luce diretta 4 pezziTRIAL 36W direct light pieces
Schermi diffusori 4 pezziDiffusers pieces
Giunti lineari 3 pezziLinear Joints pieces
Kit testate terminali 1 pezziEnd caps kit pieces
Kit sospensioni 4 pezziSuspension kit pieces
TL10301
TL823
TL80201
TL80101
SV918
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
TRIAL
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
TL101XX 18W 2000 lm 3000K 590x85x65 1,4 kgTL102XX 18W 2000 lm 4000K 590x85x65 1,4 kgTL103XX 36W 4000 lm 3000K 1130x85x65 1,9 kgTL104XX 36W 4000 lm 4000K 1130x85x65 1,9 kgTL105XX 54W 6000 lm 3000K 1670x85x65 2,4 kgTL106XX 54W 6000 lm 4000K 1670x85x65 2,4 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
TL111XX 1x18W 990x85x65 1,4 kgTL112XX 1x30W 1290x85x65 1,6 kgTL113XX 1x36W 1590x85x65 1,9 kgTL114XX 1x58W 1890x85x65 2,2 kg
FLUORESCENTE T8 A LUCE DIRETTA – DIRECT LIGHT T8 FLUORESCENT
IP20 IK05
IP20 IK05
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1100mm x 65mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 4000.00 lm
Massimo 335.58 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 86.11%
Data: 23-07-2014
Doppia Simmetria
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1590mm x 85mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 3350.00 lm
Massimo 317.00 cd/klm
Posizione C=0.00 G=20.00
Rendimento: 62.19%
Data: 06-12-1994
Doppia Simmetria
Coperture: 97+313 mm.Covers: 97+313 mm.
Coperture: 25+25 mm.Covers: 25+25 mm.
NEW
Plexiform 22901 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
230 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Kit schermi lamellari metallizzati per T8In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
T8 Metallized louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Kit schermi lamellari opali per T8In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
T8 Opal louvre kitIn self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Schermo diffusore trasparente per LED In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
LED Transparent diffuserIn internally splined self-extinguishing polycarbonate, snap on fixture. Reduces dozzle. Makes it possible to obtein IP40 degree of protection for fittings.
Schermo diffusore trasparente per T8In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
T8 Transparent diffuser In internally splined self-extinguishing polycarbonate, snap on fixture. Reduces dozzle. Makes it possible to obtein IP40 degree of protection for fittings.
Kit testate terminali verniciate In policarbonato autoestinguente, fissaggio ad innesto e con viti. Verniciato negli stessi colori dei moduli. Da usare su moduli singoli o sugli ultimi moduli della linea.
Powder coat end cap kitIn self-extinguishing polycarbonate, clip on fixture with screws. Powder coat in the same colour of the modules. To be used on single modules or on the last modules of the line.
TRIAL Accessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit testate terminaliIn policarbonato autoestinguente, fissaggio ad innesto e con viti. Da usare su moduli singoli o sugli ultimi moduli della linea.
End cap kit In self-extinghuished polycarbonate, clip on fixture with screws. To be used on single modules or on the last modules of the line.
TL80101 8,5x85x65 - Nero/Black
TL804XX 8,5x85x65
TL822 540x85x2 - 18WTL823 1080x85x2 - 36WTL824 1620x85x2 - 54W
TL825 580x85x2 - 1x18WTL826 880x85x2 - 1x30WTL827 1180x85x2 - 1x36WTL828 1480x85x2 - 1x58W
TL818 580x85x10 - 1x18WTL819 880x85x10 - 1x30WTL820 1180x85x10 - 1x36WTL821 1480x85x10 - 1x58W
TL811 580x85x10 - 1x18WTL812 880x85x10 - 1x30WTL813 1180x85x10 - 1x36WTL814 1480x85x10 - 1x58W
85
8,5
65
85
8,5
65
85
540-1080-1620
2
85
580-880-1180-1480
2
85
10
580-880-1180-14
80
85
10
580-880-1180-14
80
Kit sospensioneCoppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kit Pair of brass chrome ceiling rose, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Makes it possible the suspension of the fittings adjustable. For simple and electrified ceiling roses go to page 336-337.
SV918 Ø16x44
44
Ø 16
Plexiform 23101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
TRIALAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit attacco a soffitto In poliammide, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
Ceiling connection kit In polyamide, fixed with screws. Makes it possible to fix the modules straight onto the ceiling.
TL80701 Ø35x27 - Nero/Black
Giunto lineare In policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione in linea tra due moduli.
Linear joint In self-extinguishing polycarbonate, clip on fixture with screws. Used to make a straight joint between two modules.
TL80201 14x85x65 - Nero/Black
SV828 60x21x4 Kit giunto lineare a scomparsa In lamiera di acciaio zincata, fissaggio con viti. Permette di realizzare una giunzione “invisibile” di due moduli in linea.
Invisible linear joint kit In galvanized steel, fixed with screws. It makes possible to create an “invisible” joint of two modules in line.
Giunto angolare In policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione a “L” (90°) tra due moduli.
Angle joint In self-extinguishing polycarbonate, clip on fixture with screws. Used to make “L”(90°) joint between two modules.
TL80301 114x114x65 - Nero/Black
Giunto lineare verniciato In policarbonato autoestinguente, fissaggio ad innesto e con viti. Verniciato negli stessi colori dei moduli. Permette di realizzare una giunzione in linea tra due moduli.
Powder coat linear joint In self-extinguishing polycarbonate, clip on fixture with screws. Powder coat in the same colour of the modules. Used to make a straight joint between two modules.
TL805XX 14x85x65
Giunto angolare verniciato In policarbonato autoestinguente, fissaggio ad innesto e con viti. Verniciato negli stessi colori dei moduli. Permette di realizzare una giunzione a “L” (90°) tra due moduli.
Powder coat 90° angle joint In self-extinguishing polycarbonate, clip on fixture with screws. Powder coat in the same colour of the modules. Designed to create an “L” (90°) joint between two modules.
TL806XX 114x114x65
27
Ø35
4
6021
8514
8514
6565
114 114
65
114 114
65
232 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta.Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso.Riflettore in alluminio speculare (fluorescenza).Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting for indoor use, direct light.Ceiling or suspension mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body.Laminated specular aluminium reflector (fluorescent only).Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
PRISMASistemaSystem
SoffittoCeiling
SospensioneSuspension
Plexiform 233
PRISMA
CORPO ILLUMINANTELIGHTING FITTING
KIT SOSPENSIONESUSPENSION KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
SCHERMO LAMELLARELOUVRE
SCHERMO DIFFUSOREDIFFUSER
GIUNTO LINEARELINEAR JOINT
KIT TESTATE TERMINALIEND CAPS KIT
70
80
90
100
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Prisma FLUO T8 72W 288
Prisma LED 40W 312 10
20
30
40
50
60
Prisma FLUO T872W
Prisma LED40W
56%consumo
consumption
100%consumo
consumption
EnergySaving
44%
234 Plexiform
PRISMA
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi lamellari o schermi diffusori.- Kit testate terminali- Kit sospensione o kit attacco a plafoneSINGLE MOUNTING All fittings must be completed with:- Louvres or diffusers - End cap kit- Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi lamellari o schermi diffusori.- Giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafoneIN-LINE MOUNTING All fittings must be completed with:- Louvres or diffusers- Linear joints and/or angle joints- End cap kit- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
103
135
Versione a LED con schermo diffusoreLED version with diffuser
Schermo lamellare metalizzatoSchermo lamellare opale
Opal louvre Metallized louvre
Per realizzare un sistema con 4 PRISMA LED 40W di colore nero occorrono:To create a system with 4 PRISMA LED 40W black colour you require:
PRISMA 40W luce diretta 4 pezziPRISMA 40W direct light pieces
Schermi diffusori 4 pezziDiffusers pieces
Giunti lineari 3 pezziLinear Joints pieces
Kit testate terminali 1 pezziEnd caps kit pieces
Kit sospensione 4 pezziSuspension kit pieces
PR10301
SV907
PR80501
PR80401
SV918
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 23501 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
PRISMA
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
PR101XX 20W 2500 lm 3000K 590x135x103 1,7 kgPR102XX 20W 2500 lm 4000K 590x135x103 1,7 kgPR103XX 40W 5000 lm 3000K 1130x135x103 2,5 kgPR104XX 40W 5000 lm 4000K 1130x135x103 2,5 kgPR105XX 60W 7500 lm 3000K 1670x135x103 3,3 kgPR106XX 60W 7500 lm 4000K 1670x135x103 3,3 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PR111XX 1x18W 990x135x103 2,1 kgPR112XX 1x36W 1590x135x103 3,0 kgPR113XX 1x58W 1890x135x103 3,5 kg
PR114XX 2x18W 990x135x103 2,1 kgPR115XX 2x36W 1590x135x103 3,1 kgPR116XX 2x58W 1890x135x103 3,5 kg
I moduli bilampada sono cablati con unico reattore.Coperture: 205+205 mm.
The two-lamps modules are wired with one single ballast.Covers: 205+205 mm.
FLUORESCENTE T8 A LUCE DIRETTA – DIRECT LIGHT T8 FLUORESCENT
IP20 IK05
IP20 IK05
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1590mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 306.00 cd/klm
Posizione C=0.00 G=20.00
Rendimento: 65.44%
Data: 12-12-1994
Doppia Simmetria
Coperture: 25+25 mm.Covers: 25+25 mm.
NEW
236 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Kit schermi lamellari metallizzati per T8 In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
T8 metallized louvre kitIn self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Kit schermi lamellari opali per T8 In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
T8 opal louvre kitIn self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Schermo diffusore opale per LED In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
LED opal diffuser In internally splined self-extinguishing polycarbonate, snap on fixture. Reduces dozzle. Makes it possible to obtein IP40 degree of protection for fittings.
Schermo diffusore trasparente per T8 In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
T8 transparent diffuser In internally splined self-extinguishing polycarbonate, snap on fixture. Reduces dozzle. Makes it possible to obtein IP40 degree of protection for fittings.
PRISMA Accessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit testate terminaliIn policarbonato autoestinguente, fissaggio ad innesto e con viti. Da usare su moduli singoli o sugli ultimi moduli della linea.
End cap kit In self-extinghuished polycarbonate, clip on fixture with screws. To be used on single modules or on the last modules of the line.
PR80101 8,5x135x103 - Nero/Black
Kit testate terminali verniciate In policarbonato autoestinguente, fissaggio ad innesto e con viti. Verniciato negli stessi colori dei moduli. Da usare su moduli singoli o sugli ultimi moduli della linea.
Powder coat end cap kit In self-extinguishing polycarbonate, clip on fixture with screws. Powder coat in the same colour of the modules. To be used on single modules or on the last modules of the line.
PR804XX 8,5x135x103
SV906 540x135x2 - 20WSV907 1080x135x2 - 40WSV908 1620x135x2 - 60W
SV909 580x135x2 - 1/2x18WSV910 1180x135x2 - 1/2x36WSV911 1480x135x2 - 1/2x58W
SV903 580x135x10 - 1/2x18WSV904 1180x135x10 - 1/2x36WSV905 1480x135x10 - 1/2x58W
SV897 580x135x10 - 1/2x18WSV898 1180x135x10 - 1/2x36WSV899 1480x135x10 - 1/2x58W
135
8,5
103
135
8,5
103
135
540-1080-1620
2
135
580-1180-1480
2
135
10
580-1180-14
80
135
10
580-1180-14
80
Kit sospensioneCoppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kit Pair of brass chrome ceiling rose, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Makes it possible the suspension of the fittings adjustable. For simple and electrified ceiling roses go to page 336-337.
SV918 Ø16x44
44
Ø 16
Plexiform 23701 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
PRISMAAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit attacco a soffitto In poliammide, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
Ceiling connection kit In polyamide, fixed with screws. Makes it possible to fix the modules straight onto the ceiling.
PR80701 Ø35x27 - Nero/Black
Giunto lineare In policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione in linea tra due moduli.
Linear joint In self-extinguishing polycarbonate, clip on fixture with screws. Used to make a straight joint between two modules.
PR80201 13x135x103 - Nero/Black
SV882 60x21x4 Kit giunto lineare a scomparsa In lamiera di acciaio zincata, fissaggio con viti. Permette di realizzare una giunzione “invisibile” di due moduli in linea.
Invisible linear joint kitIn galvanized steel, fixed with screws. It makes possible to create an “invisible” joint of two modules in line.
Giunto angolare In policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione a “L”(90°) tra due moduli.
Angle joint In self-extinguishing polycarbonate, clip on fixture with screws. Used to make “L”(90°) joint between two modules.
PR80301 147x147x103 - Nero/Black
Giunto lineare verniciato In policarbonato autoestinguente, fissaggio ad innesto e con viti. Verniciato negli stessi colori dei moduli. Permette di realizzare una giunzione in linea tra due moduli.
Powder coat linear joint In self-extinguishing polycarbonate, clip on fixture with screws. Powder coat in the same colour of the modules. Used to make a straight joint between two modules.
PR805XX 13x135x103
Giunto angolare verniciato In policarbonato autoestinguente, fissaggio ad innesto e con viti. Verniciato negli stessi colori dei moduli. Permette di realizzare una giunzione a “L” (90°) tra due moduli.
Powder coat 90° angle joint In self-extinguishing polycarbonate, clip on fixture with screws. Powder coat in the same colour of the modules. Designed to create an “L” (90°) joint between two modules.
PR806XX 147x147x103
27
Ø354
6021
13513
103
13513
103
147 147
103
147 147
103
238 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta.Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari ed angolari.Corpo in alluminio estruso.Riflettore in alluminio speculare (fluorescenza).Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting direct light for indoor use.Ceiling or suspension mounted. It allows the creation of a continuous line utilising linear and angle joints.Extruded aluminium body.Laminated specular aluminium reflector (fluorescent only).Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic driver or ballast, wiring with line.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with dimmable or DALI driver.Bespoke colours, bespoke measurements.
PULSARSistemaSystem
SoffittoCeiling
SospensioneSuspension
Plexiform 239
PULSAR
CORPO ILLUMINANTELIGHTING FITTING
KIT SOSPENSIONESUSPENSION KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
SCHERMO LAMELLARELOUVRE
SCHERMO DIFFUSOREDIFFUSER
KI GIUNTO LINEARELINEAR JOINT KIT
KIT TESTATE TERMINALIEND CAPS KIT
70
80
90
100
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Beta FLUO T8 72W 301
Pulsar LED 40W 312 10
20
30
40
50
60
Beta FLUO T872W
Pulsar LED40W
56%consumo
consumption
100%consumo
consumption
EnergySaving
44%
240 Plexiform
PULSAR
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi lamellari o schermi diffusori - Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Lowers or diffusers - End cap kit- Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Schermi lamellari o schermi diffusori- Kit giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Louvres or diffusers- Linear joints kit and/or angle joints- End cap kit- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
55
135
Versione a LED con schermo diffusoreLED version with diffuser
Schermo lamellare opale
Opal louvre
Schermo lamellare metalizzato
Metallized louvre
Per realizzare un sistema con 4 PULSAR LED 40W di colore nero occorrono:To create a system with 4 PULSAR LED 40W black colour you require:
PULSAR 40W luce diretta 4 pezziPULSAR 40W direct light pieces
Schermi diffusori 4 pezziDiffusers pieces
Kit giunti lineari 3 pezziLinear joints kit pieces
Kit testate terminali 1 pezziEnd caps kit pieces
Kit sospensioni 4 pezziSuspension kit pieces
PU10301
SV907
SV882
PU80101
SV918
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 24101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
PULSAR
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
PU101XX 20W 2500 lm 3000K 590x135x55 1,6 kgPU102XX 20W 2500 lm 4000K 590x135x55 1,6 kgPU103XX 40W 5000 lm 3000K 1130x135x55 2,3 kgPU104XX 40W 5000 lm 4000K 1130x135x55 2,3 kgPU105XX 60W 7500 lm 3000K 1670x135x55 3,0 kgPU106XX 60W 7500 lm 4000K 1670x135x55 3,0 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PU111XX 1x18W 1080x135x55 2,2 kgPU112XX 1x36W 1680x135x55 3,0 kgPU113XX 1x58W 1980x135x55 5,9 kg
PU114XX 2x18W 1080x135x55 2,2 kgPU115XX 2x36W 1680x135x55 3,0 kgPU116XX 2x58W 1980x135x55 6,0 kg
I moduli bilampada sono cablati con unico reattore.Coperture: 220+280 mm.
The two-lamps modules are wired with one single ballast.Covers: 220+280 mm.
FLUORESCENTE T8 A LUCE DIRETTA – DIRECT LIGHT T8 FLUORESCENT
IP20 IK05
IP20 IK05
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
60
60
120
180
240
300
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1678mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 279.41 cd/klm
Posizione C=0.00 G=30.00
Rendimento: 70.17%
Data: 17-03-1997
Doppia Simmetria
Coperture: 25+25 mm.Covers: 25+25 mm.
NEW
242 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Kit schermi lamellari opali per T8In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
T8 opal louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Kit schermi lamellari metallizzati In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
T5 metallized louvre kit In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
Schermo diffusore opale per LED In policarbonato autoestinguente rigato internamente, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
LED opal diffuser In internally splined self-extinguishing polycarbonate. Reduces dozzle. Makes it possible to obtein IP40 degree of protection for fittings.
Schermo diffusore trasparente per T8In policarbonato autoestinguente fissaggio a scatto. Permette di ridurre l’abbagliamento.
T8 transparent diffuser In self-extinguishing polycarbonate, snap on fixture. Reduces dozzle.
PULSARAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit testate terminaliIn policarbonato autoestinguente, fissaggio ad innesto e con viti. Da usare su moduli singoli o sugli ultimi moduli della linea.
End cap kit In self-extinghuished polycarbonate, clip on fixture with screws. To be used on single modules or on the last modules of the line.
PU80101 8,5x135x55 - Nero/BlackPU80102 8,5x135x55 - Bianco/White
Kit testate terminali verniciate In policarbonato autoestinguente, fissaggio ad innesto e con viti. Verniciato negli stessi colori dei moduli. Da usare su moduli singoli o sugli ultimi moduli della linea.
Powder coat end cap kitIn self-extinguishing polycarbonate, clip on fixture with screws. Powder coat in the same colour of the modules. To be used on single modules or on the last modules of the line.
PU803XX 8,5x135x55
SV906 540x135x2 - 20WSV907 1080x135x2 - 40WSV908 1620x135x2 - 60W
SV909 580x135x2 - 1/2x18WSV910 1180x135x2 - 1/2x36WSV911 1480x135x2 - 1/2x58W
SV903 580x135x10 - 1/2x18WSV904 1180x135x10 - 1/2x36WSV905 1480x135x10 - 1/2x58W
SV897 580x135x10 - 1/2x18WSV898 1180x135x10 - 1/2x36WSV899 1480x135x10 - 1/2x58W
55
135
8,5
55
135
8,5
135
540-1080-1620
2
135
580-1180-1480
2
135
10
580-1180-14
80
135
10
580-1180-14
80
Kit sospensione Coppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile. Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kitPair of chromed brass ceiling roses, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Allows adjustable installation height of the suspension. For simple and electrified ceiling roses go to page 336-337.
SV918 Ø16x44
44
Ø 16
Plexiform 24301 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
PULSARAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit giunto lineare a scomparsa In lamiera di acciaio zincata, fissaggio con viti. Permette di realizzare una giunzione “invisibile” di due moduli.
Invisible linear joint kit In galvanized steel, fixed with screws. It makes possible to create an “invisible” joint of two modules in line.
SV882 60x21x4
PU80201 147x147x55 - Nero/BlackPU80202 147x147x55 - Bianco/White
Giunto angolare In policarbonato autoestinguente, fissaggio ad innesto e con viti. Permette di realizzare una giunzione a “L”(90°) tra due moduli.
Angle joint In self-extinguishing polycarbonate, clip on fixture with screws. Used to make “L”(90°) joint between two modules.
Giunto angolare verniciato In policarbonato autoestinguente, fissaggio ad innesto e con viti. Verniciato negli stessi colori dei moduli. Permette di realizzare una giunzione a “L” (90°) tra due moduli.
Powder coat 90° angle joint In self-extinguishing polycarbonate, clip on fixture with screws. Powder coat in the same colour of the modules. Designed to create an “L” (90°) joint between two modules.
PU804XX 147x147x55
Kit attacco a soffitto In poliammide, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
Ceiling connection kit In polyamide, fixed with screws. Makes it possible to fix the modules straight onto the ceiling.
PU80501 Ø35x27 - Nero/BlackPU80502 Ø35x27 - Bianco/White
27
Ø354
6021
147 147
55
147 147
55
244 Plexiform
Apparecchio fluorescente per interni monolampada e bilampada, ad emissione diretta o diretta/indiretta.Installazione a sospensione o soffitto. Installazione a soffitto o sospensione. Possibilità di configurazione in fila continua con giunti lineari.Corpo in alluminio estruso, testate e giunzioni in pressofusione di alluminio.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
Indoor fluorescent single and twin lamps fitting, direct or direct/indirect light.Ceiling or suspension mounted. It allows the creation of a continuous line utilising linear joints.Extruded aluminium body with die-cast aluminium end caps and joints.Baked with epoxy powder coatings, resistant to damp enviroments and UV-ray stabilized.Supplied with electronic ballast, wiring with line.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and following amendments.Product complies RoHS standards.
On request:Wiring with switch dim or DALI dimmable ballast.Bespoke colours, bespoke measurements.
MITOSSistemaSystem
SoffittoCeiling
SospensioneSuspension
UGR<19
Plexiform 245
MITOS
CORPO ILLUMINANTELIGHTING FITTING
KIT SOSPENSIONESUSPENSION KIT
KIT ATTACCO A SOFFITTOCEILING CONNECTION KIT
SCHERMO DIFFUSOREDIFFUSER
GIUNTO LINEARELINEAR JOINT
KIT TESTATE TERMINALIEND CAPS KIT
OTTICA ANTIRIFLESSOANTIREFLECTION OPTICUGR<19
246 Plexiform
MITOS 1
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Ottiche antiriflesso o schermi diffusori - Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Antireflection optic or diffusers - End cap kit- Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Ottiche antiriflesso o schermi diffusori- Giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Antireflection optic or diffusers- Linear joints and/or angle joints- End cap kit- Suspension or ceiling connection kits
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare un sistema con 4 MITOS 1, 1x35W di colore nero occorrono:To create a system with 4 MITOS 1, 1x35W black colour you require:
MITOS 1x35W luce diretta 4 pezziMITOS 1x35W direct light pieces
Schermi diffusori 4 pezziDiffusers pieces
Giunti lineari 3 pezziLinear Joints pieces
Kit testate terminali 1 pezziEnd caps kit pieces
Kit sospensioni 4 pezziSuspension kit pieces
MT10901
MT81001
MT80301
MT80101
MT823
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Versione con ottca antiriflesso diritta UGR<19Version with straght antireflection optic UGR<19
Schermo diffusore inclinato
Tilted diffuser
Ottica antiriflesso inclinata
Oblique antireflection optic
Schermo diffusore dritto
Straight diffuser
54
72
124124
18°
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 24701 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
MITOS 1FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOMT101XX 1x24W 1597x124x54 1,5 kgMT102XX 1x39W 1897x124x54 2,2 kgMT103XX 1x49W 1497x124x54 3,6 kgMT104XX 1x54W 1197x124x54 2,9 kgMT105XX 1x80W 1497x124x54 3,6 kg
HEMT106XX 1x14W 1597x124x54 1,5 kgMT107XX 1x21W 1897x124x54 2.2 kgMT108XX 1x28W 1197x124x54 2,9 kgMT109XX 1x35W 1497x124x54 3,6 kg
FLUORESCENTE T5 A LUCE DIRETTA/INDIRETTA – DIRECT/INDIRECT LIGHT T5 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOMT201XX 1x24W 597x124x54 1,4 kgMT202XX 1x39W 897x124x54 2,0 kgMT203XX 1x49W 1497x124x54 3,2 kgMT204XX 1x54W 1197x124x54 2,6 kgMT205XX 1x80W 1497x124x54 3,2 kg
HEMT206XX 1x14W 597x124x54 1,4 kgMT207XX 1x21W 897x124x54 2,0 kgMT208XX 1x28W 1197x124x54 2,6 kgMT209XX 1x35W 1497x124x54 3,2 kg
Gli apparecchi vengono forniti completi di schermo diffusore superiore in policarbonato autoestinguente.
Fixtures supplied with upper transparent self-extinguishing polycarbonate diffuser.
IP20 IK05
IP20 IK05
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1221mm x 124mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4450.00 lm
Massimo 145.92 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 33.43%
Data: 16-01-2008
Doppia Simmetria
50
50
100
100
150
150
200
200
250
250
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1220mm x 124mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4450.00 lm
Massimo 191.57 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 70.35%
Data: 25-03-2008
Doppia Simmetria
248 Plexiform
MITOS 2
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Ottica antiriflesso o schermi diffusori - Kit testate terminali- Kit sospensione o kit attacco a plafone
SINGLE MOUNTING All fittings must be completed with:- Antireflection optic or diffusers - End cap kit- Suspension or ceiling connection kits
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Ottica antiriflesso o schermi diffusori- Giunti lineari e/o giunti angolari- Kit testate terminali- Kit sospensione o kit attacco a plafone
IN-LINE MOUNTING All fittings must be completed with:- Antireflection optic or diffusers- Linear joints and/or angle joints- End cap kit- Suspension or ceiling connection kits
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Ottica antiriflesso inclinata
Oblique antireflection optic
Schermo diffusore dritto
Straight diffuser
Ottica antiriflesso dritto
Straight antireflection optic
Versione con schermo diffusore inclinatoVersion with tilted diffuser
54
248 248
18°18°
72
Per realizzare un sistema con 4 MITOS 2, 2x35W di colore nero occorrono:To create a system with 4 MITOS 2, 2x35W black colour you require:
MITOS 2x35W luce diretta 4 pezziMITOS 2x35W direct light pieces
Schermi diffusori 8 pezziDiffusers pieces
Giunti lineari 3 pezziLinear Joints pieces
Kit testate terminali 1 pezziEnd caps kit pieces
Kit sospensioni 4 pezziSuspension kit pieces
MT10901
MT81001
MT80401
MT80201
MT824
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 24901 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
MITOS 2FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT
FLUORESCENTE T5 A LUCE DIRETTA/INDIRETTA – DIRECT/INDIRECT LIGHT T5 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOMT301XX 2x24W 597x248x54 3,0 kgMT302XX 2x39W 897x248x54 4,4 kgMT303XX 2x49W 1497x248x54 7,2 kgMT304XX 2x54W 1197x248x54 5,8 kgMT305XX 2x80W 1497x248x54 7,2 kg
HEMT306XX 2x14W 597x248x54 3,0 kgMT307XX 2x21W 897x248x54 4,4 kgMT308XX 2x28W 1197x248x54 5,8 kgMT309XX 2x35W 1497x248x54 7,2 kg
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOMT401XX 2x24W 597x248x54 2,8 kgMT402XX 2x39W 897x248x54 4,0 kgMT403XX 2x49W 1497x248x54 6,5 kgMT404XX 2x54W 1197x248x54 5,3 kgMT405XX 2x80W 1497x248x54 6,5 kg
HEMT406XX 2x14W 597x248x54 2,8 kgMT407XX 2x21W 897x248x54 4,0 kgMT408XX 2x28W 1197x248x54 5,3 kgMT409XX 2x35W 1497x248x54 6,5 kg
Gli apparecchi vengono forniti completi di schermo diffusore superiore in policarbonato autoestinguente.
Fixtures supplied with upper transparent self-extinguishing polycarbonate diffuser.
IK05 IP20
IK05 IP20
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1221mm x 248mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 148.62 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 33.78%
Data: 18-01-2008
Doppia Simmetria
40
40
80
80
120
120
160
160
200
200
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1220mm x 248mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 182.59 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 69.90%
Data: 25-03-2008
Doppia Simmetria
250 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Kit sospensione archetto MITOS 1Due funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
MITOS 1 arc suspension kitPair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
MT823 Ø16x44
MITOS Accessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit testate terminali MITOS 1 In pressofusione di alluminio, fissaggio con viti.
MITOS 1 end cap kitIn die-cast aluminium, screw fixing.
MT801XX 12x124x54
Kit testate terminali MITOS 2In pressofusione di alluminio, fissaggio con viti.
MNITOS 2 end cap kitIn die-cast aluminium, screw fixing.
MT802XX 12x248x54
Schermo diffusore diritto opale In policarbonato autoestinguente, opale con struttura ricurva in profilo di alluminio e verniciata dello stesso colore dell’apparecchio, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
Opal straight diffuser In self-extinguishing opal polycarbonate powder coat aluminium curved profile in same colour of fitting, snap on fixture. Reduce dozzle and makes possible to obtein IP40 degree of protection of the fitting.
MT807XX 597x112x30 - 1/2x14/24WMT808XX 897x112x30 - 1/2x21/39WMT809XX 1197x112x30 - 1/2x28/54WMT810XX 1497x112x30 - 1/2x35/49/80W
Schermo diffusore inclinato opale (non orientabile) In policarbonato autoestinguente, opale con struttura ricurva a 18° in profilo di alluminio e verniciata dello stesso colore dell’apparecchio, fissaggio a scatto. Permette di ridurre l’abbagliamento e di ottenere il grado di protezione IP40.
Diffuser oblique louvre (not adjustable)In self-extinguishing opal polycarbonate aluminium curved profile 18° powder coat in same colour of fitting, snap on fixture. Reduce dozzle and makes possible to obtein IP40 degree of protection of the fitting.
MT811XX 597x112x48 - 1/2x14/24WMT812XX 897x112x48 - 1/2x21/39WMT813XX 1197x112x48 - 1/2x28/54WMT814XX 497x112x48 - 1/2x35/49/80W
Ottica antiriflesso diritta UGR<19Lamellare in allumino speculare preanodizzato, antiriflesso a bassissima iridescenza. Struttura ricurva in profilo di alluminio verniciata dello stesso colore dell’apparecchio, fissaggio a scatto. Adatta per uffici con videoterminali.
Straight antireflection optic UGR<19Laminated specular pre-anodized aluminium antiglare with low iridescence. Curved profile powder coat in same colour of fitting, snap on fixture. Suitable for offices with VUDs.
MT815XX 597x112x30 - 1/2x14/24WMT816XX 897x112x30 - 1/2x21/39WMT817XX 1197x112x30 - 1/2x28/54WMT818XX 1497x112x30 - 1/2x35/49/80W
Ottica antiriflesso inclinata (non orientabile)Lamellare in allumino speculare preanodizzato, antiriflesso a bassissima iridescenza. Struttura ricurva 18° in profilo di alluminio verniciata dello stesso colore dell’apparecchio, fissaggio a scatto. Adatta per uffici con videoterminali.
Oblique glossy aluminium antireflection optic (not adjustable)Laminated specular pre-anodized aluminium antiglare with low iridescence. Curved profile 18° powder coat in same colour of fitting, snap on fixture. Suitable for offices with VUDs.
MT819XX 597x112x48 - 1/2x14/24WMT820XX 897x112x48 - 1/2x21/39WMT821XX 1197x112x48 - 1/2x28/54WMT822XX 1497x112x48 - 1/2x35/49/80W
54
124 12
54
124 12
248
54
12
112
112
112
30
112
3048
48
44
Ø 16
Plexiform 25101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
MITOSAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit sospensione archetto MITOS 2Due funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
MITOS 2 arc suspension kitPair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
MT824 Ø16x44
MT803XX 12x124x54 Giunto lineare verniciato MITOS 1 In pressofusione di alluminio, fissaggio con viti. Permette di realizzare una giunzione in linea tra due moduli.
MITOS 1 powder coat linear joint In die-cast aluminium, screw fixing. Used to make a stright joint between two modules.
Giunto lineare verniciato MITOS 2 In pressofusione di alluminio, fissaggio con viti. Permette di realizzare una giunzione in linea tra due moduli.
MITOS 2 powder coat linear joint In die-cast aluminium, screw fixing. Used to make a stright joint between two modules.
MT804XX 12x248x54
Kit attacco a soffitto MITOS 1 In lamiera verniciata, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
MITOS 1 ceiling connection kitPowder coat steel sheet fixed with screws. Makes it possible to fix the modules straight onto the ceiling.
MT805XX 54x30x25
Kit attacco a soffitto MITOS 2 In lamiera verniciata, fissaggio con viti. Permette di fissare i moduli direttamente a soffitto.
MITOS 2 ceiling connection kitPowder coat steel sheet fixed with screws. Makes it possible to fix the modules straight onto the ceiling.
MT806XX 179x30x25
54
124 12
54
124 12
248
54
12
30
25
179
25
3054
44
Ø 16
252 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta monolampada e bilampada.Installazione a soffitto, sospensione o parete. Possibilità di configurazione in fila continua con giunti lineari.Corpo in profilo di alluminio, testate e giunzioni in pressofusione di alluminio.Schermo in policarbonato autoestinguente con bicomponente satinato, opalino.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico, linea passante.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 110 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
LED or fluorescent fitting for indoor use, direct light single lamp and twin lamp.Ceiling, suspension or wall mounted. It allows the creation of a continuous line utilising linear joints.Aluminium profile housing, die-cast aluminium end caps and joints.Self-extinguishing two-components opal polycarbonate, satin finish diffuser.Baked with epoxy powder coatings, resistant to damp enviroments and UV-ray stabilized.Supplied with electronic ballast, wiring with line.Our LED, series 5630, are powered by constant current drivers, efficiency 110 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with switch dim or DALI dimmable ballast.Bespoke colours, bespoke measurements.
DROPSistemaSystem
SoffittoCeiling
PareteWall
SospensioneSuspension
Plexiform 253
DROP
CORPO ILLUMINATELIGHTING FITTING
KIT SOSPENSIONESUSPENSION KIT
KIT ATTACCO A SOFFITTO/PARETECEILING/WALL CONNECTION KIT
SCHERMO DIFFUSOREDIFFUSER
70
80
90
100
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Drop FLUO T5 54W 96
Drop LED 24W 172 10
20
30
40
50
60
Drop FLUO T554W
Drop LED24W
44%consumo
consumption
100%consumo
consumption
EnergySaving
56%
GIUNTO LINEARELINEAR JOINT
KIT TESTATE TERMINALIEND CAPS KIT
254 Plexiform
DROP 1
74
53
Versione a LEDLED version
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Kit testate terminali- Kit sospensione, kit attacco a plafone o kit attacco a parete
SINGLE MOUNTING All fittings must be completed with:- End cap kit- Suspension, ceiling connection or wall connection kit
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Giunti lineari- Kit testate terminali- Kit sospensione, kit attacco a plafone o kit attacco a parete
IN-LINE MOUNTING All fittings must be completed with:- Linear joints- End cap kit- Suspension, ceiling connection or wall connection kit
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare un sistema con 4 DROP 1 LED 24W di colore nero occorrono:To create a system with 4 DROP 1 LED 24W black colour you require:
DROP 24W luce diretta 4 pezziDROP 24W direct light pieces
Giunti lineari 3 pezziLinear Joints pieces
Kit testate terminali 1 pezziEnd caps kit pieces
Kit sospensioni 4 pezziSuspension kit pieces
DP10301
DP80201
DP80101
SV918
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 25501 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
DROP 1
FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HODP111XX 1x24W 550x53x74 1,0 kgDP112XX 1x39W 850x53x74 1,5 kgDP113XX 1x49W 1450x53x74 2,5 kgDP114XX 1x54W 1150x53x74 2,0 kgDP115XX 1x80W 1450x53x74 2,5 kg
HE DP116XX 1x14W 550x53x74 1,0 kgDP117XX 1x21W 850x53x74 1,5 kgDP118XX 1x28W 1150x53x74 2,0 kgDP119XX 1x35W 1450x53x74 2,5 kg
Gli apparecchi vengono forniti completi di schermo diffusore opale in policarbonato autoestinguente.
Fixtures supplied with opal self-extinguishing polycarbonate diffuser.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DP101XX 12W 1300 lm 3000K 540x53x74 0,9 kgDP102XX 12W 1300 lm 4000K 540x53x74 0,9 kgDP103XX 24W 2600 lm 3000K 1080x53x74 1,8 kgDP104XX 24W 2600 lm 4000K 1080x53x74 1,8 kgDP105XX 36W 3900 lm 3000K 1620x53x74 2,7 kgDP106XX 36W 3900 lm 4000K 1620x53x74 2,7 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
Gli apparecchi vengono forniti completi di schermo diffusore opale in policarbonato autoestinguente.
Fixtures supplied with opal self-extinguishing polycarbonate diffuser.
IP40 IK06
IP40 IK06
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1100mm x 100mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 2600.00 lm
Massimo 317.38 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 84.85%
Data: 25-07-2014
Doppia Simmetria
30
30
60
90
120
150
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1192mm x 53mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4450.00 lm
Massimo 104.05 cd/klm
Posizione C=0.00 G=40.00
Rendimento: 58.36%
Data: 15-01-2008
Doppia Simmetria
NEW
256 Plexiform
DROP 2
Versione a LEDLED version
75
144
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Kit testate terminali- Kit sospensione archetto
SINGLE MOUNTING All fittings must be completed with:- End cap kit- Suspension kit
MONTAGGIO IN LINEA I corpi illuminanti dovranno essere completati con:- Giunti lineari- Kit testate terminali- Kit sospensione archetto
IN-LINE MOUNTING All fittings must be completed with:- Linear joints- End cap kit- Suspension kit
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare un sistema con 4 DROP 2 LED 48W di colore nero occorrono:To create a system with 4 DROP 2 48W black colour you require:
DROP 48W luce diretta 4 pezziDROP 48W direct light pieces
Giunti lineari 6 pezziLinear Joints pieces
Kit testate terminali 2 pezziEnd caps kit pieces
Kit sospensioni archetto 4 pezziSuspension kit pieces
DP12301
DP80201
DP80101
SV920
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 25701 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
DROP 2
SOSPENSIONE FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT SUSPENSION
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HODP131XX 2x24W 550x144x75 2,0 kgDP132XX 2x39W 850x144x75 3,1 kgDP133XX 2x49W 1450x144x75 5,3 kgDP134XX 2x54W 1150x144x75 4,2 kgDP135XX 2x80W 1450x144x75 5,3 kg
HE DP136XX 2x14W 550x144x75 2,0 kgDP137XX 2x21W 850x144x75 3,1 kgDP138XX 2x28W 1150x144x75 4,2 kgDP139XX 2x35W 1450x144x75 5,3 kg
I moduli bilampada sono cablati con unico reattore.Gli apparecchi vengono forniti completi di schermo diffusore in policarbonato autoestinguente.
Fluorescent two-lamps modules are wired with one single ballast. Fixtures supplied with opal self-extinguishing polycarbonate diffuser.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
DP121XX 24W 2600 lm 3000K 540x144x75 1,9 kg
DP122XX 24W 2600 lm 4000K 540x144x75 1,9 kg
DP123XX 48W 5200 lm 3000K 1080x144x75 3,7 kg
DP124XX 48W 5200 lm 4000K 1080x144x75 3,7 kg
DP125XX 72W 7800 lm 3000K 1620x144x75 5,5 kg
DP126XX 72W 7800 lm 4000K 1620x144x75 5,5 kg
SOSPENSIONE LED A LUCE DIRETTA – DIRECT LIGHT LED SUSPENSION
Gli apparecchi vengono forniti completi di schermo diffusore opale in policarbonato autoestinguente.
Fixtures supplied with opal self-extinguishing polycarbonate diffuser.
IK06 IP40
IK06 IP40
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1100mm x 100mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 2600.00 lm
Massimo 317.38 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 84.85%
Data: 25-07-2014
Doppia Simmetria
30
30
60
90
120
150
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1192mm x 53mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4450.00 lm
Massimo 104.05 cd/klm
Posizione C=0.00 G=40.00
Rendimento: 58.36%
Data: 15-01-2008
Doppia Simmetria
NEW
258 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
DROP Accessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit Testate terminali verniciate Coppia di testate in pressofusione di alluminio, verniciate. Fissaggio con viti. Da usare su moduli singoli o sugli ultimi della linea.
Powder coated end caps kit Pair of end caps in die-cast aluminium, powder coat. Screw fixing. To be used on single modules or on the last modules of the line.
DP801XX 21x53x74
Kit sospensione archetto DROP 2Due funi in acciao (1500 mm) con archetto, due rosoni cromati e regolatori millimetrici. Permette la sospensione degli apparecchi regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
DROP 2 arc suspension kitPair of steel ropes with arc, two chrome ceiling roses with millimetrical regulation. It makes possible the suspension of the fitting adjustable.For simple and electrified ceiling roses go to page 336-337.
Kit attacco a soffitto/parete diritto LED (solo DROP 1)Profilo in allumiinio e tappi in policarbonato, verniciati dello stesso colore della lampada. Fissaggio a scatto.
LED straight ceiling/wall connection kit (DROP 1 only) Aluminium profile and polycarbonate covers, powder coat in same colour of fixture. Snap on fixture.
Kit attacco a soffitto/parete inclinato LED (solo DROP 1) Profilo in allumiinio e tappi in policarbonato, verniciati dello stesso colore della lampada. Fissaggio a scatto.
LED oblique ceiling/wall connection kit (DROP 1 only) Aluminium profile and polycarbonate covers, powder coat in same colour of fixture. Snap on fixture.
Kit attacco a soffitto/parete diritto T5 (solo DROP 1) Profilo in allumiinio e tappi in policarbonato, verniciati dello stesso colore della lampada. Fissaggio a scatto.
T5 straight ceiling/wall connection kit (DROP 1 only)Aluminium profile and polycarbonate covers, powder coat in same colour of fixture. Snap on fixture.
Kit attacco a soffitto/parete inclinato T5 (solo DROP 1) Profilo in allumiinio e tappi in policarbonato, verniciati dello stesso colore della lampada. Fissaggio a scatto.
T5 oblique ceiling/wall connection kit (DROP 1 only) Aluminium profile and polycarbonate covers, powder coat in same colour of fixture. Snap on fixture.
DP803XX 540x30x33 - 12WDP804XX 1080x30x33 - 24WDP805XX 1620x30x33 - 36W
DP810XX 540x30x36 - 12WDP811XX 1080x30x36 - 24WDP812XX 1620x30x36 - 36W
DP806XX 550x30x33 - 1x14/24WDP807XX 850x30x33 - 1x21/39WDP808XX 1150x30x33 - 1x28/54WDP809XX 1450x30x33 - 1x35/49/80W
DP813XX 550x30x36 - 1x14/24WDP814XX 850x30x36 - 1x21/39WDP815XX 1150x30x36 - 1x28/54WDP816XX 1450x30x36 - 1x35/49/80W
74
5321
Kit sospensione DROP 1 Coppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile. Per rosoni semplici ed elettrificati vedere pag. 336-337.
DROP 1 suspension kitPair of chromed brass ceiling roses, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Allows adjustable installation height of the suspension. For simple and electrified ceiling roses go to page 336-337.
SV918 Ø16x4444
Ø 16
SV920 Ø16x44
44
Ø 16
30
33
30
33
30
36
30
36
Plexiform 25901 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
DROPAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Giunto lineare In pressofusione di alluminio, verniciato, fissaggio con viti. Permette di realizzare una giunzione in linea tra due moduli.
Linear joint In die-cast aluminium, powder coat, screw fixing. Used to make a straight joint between two modules.
DP802XX 30x53x74
7453
30
260 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta.Installazione a soffitto o sospensione.Corpo in lamiera di acciaio.Riflettore in alluminio speculare (fluorescenza).Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 125 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.La versione con ottica ottiene un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni speciali.
LED or fluorescent fitting direct light for indoor use.Ceiling or suspension mounted.Sheet steel body.Laminated specular aluminium reflector (fluorescent only).Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic ballast.Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.The optic version attains UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with switch dim or DALI dimmable ballast.Bespoke colours.
QUASARSoffittoCeiling
SospensioneSuspension
UGR<19
Plexiform 261
QUASAR
CORPO ILLUMINANTELIGHTING FITTING
KIT SOSPENSIONESUSPENSION KIT
SCHERMO DIFFUSOREDIFFUSER
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Quasar FLUO T5 54W 185
Quasar LED 36W 290
70
80
90
100
10
20
30
40
50
60
Quasar Fluo T554W
Quasar LED36W
67%consumo
consumption
100%consumo
consumption
EnergySaving
33%
UGR<19
KIT ATTACCO A SOFFITTO IN DOTAZIONECEILING CONNECTION KIT INCLUDED
262 Plexiform
QUASAR 1
Versione a LED con schermo diffusoreLED version with diffuser
Ottica antiriflesso
Antireflection optic
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori oppure ottiche antiriflesso- Kit sospensione se si necessita di sospensione
SINGLE MOUNTING All fittings must be completed with:- Diffusers or antireflection optics- Suspension kit if needed
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare 1 QUASAR 1 LED 36W di colore nero occorrono:To make 1 QUASAR 1 LED 36W black colour you require:
QUASAR 36W 1 pezziQUASAR 36W pieces
Schermi diffusori 1 pezziDiffusers pieces
Kit sospensioni 1 pezziSuspension kit pieces
QU10301
SV858
SV918
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
62
62
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 26301 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
QUASAR 1
FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOQU111XX 1x24W 582x62x62 1,0 kgQU112XX 1x39W 882x62x62 1,4 kgQU113XX 1x49W 1482x62x62 2,1 kgQU114XX 1x54W 1182x62x62 1,8 kgQU115XX 1x80W 1482x62x62 2,1 kg
HE
QU116XX 1x14W 582x62x62 1,0 kgQU117XX 1x21W 882x62x62 1,4 kgQU118XX 1x28W 1182x62x62 1,8 kgQU119XX 1x35W 1482x62x62 2,1 kg
Compreso di kit attacco a soffitto. Se si necessita di sospensione ordinarla a parte.
Ceiling connection kit inclued. If suspended order suspension accessories separately.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
QU101XX 18W 2000 lm 3000K 571x62x62 0,9 kgQU102XX 18W 2000 lm 4000K 571x62x62 0,9 kgQU103XX 36W 4000 lm 3000K 1111x62x62 1,7 kgQU104XX 36W 4000 lm 4000K 1111x62x62 1,7 kgQU105XX 54W 6000 lm 3000K 1651x62x62 2,5 kgQU106XX 54W 6000 lm 4000K 1651x62x62 2,5 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
Compreso di kit attacco a soffitto. Se si necessita di sospensione ordinarla a parte.
Ceiling connection kit inclued. If suspended order suspension accessories separately.
IP20 IK05
IP20 IK05
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1100mm x 65mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 4000.00 lm
Massimo 335.58 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 86.11%
Data: 23-07-2014
Doppia Simmetria
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
90
270
180
1182mm x 62mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 171.65 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 44.36%
Data: 10-06-2005
Simmetrico 0-180
NEW
264 Plexiform
QUASAR 2
Versione a LED con schermo diffusoreLED version with diffuser
62
97
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Schermi diffusori- Kit sospensione se si necessita di sospensione
SINGLE MOUNTING All fittings must be completed with:- Diffusers- Suspension kit if needed
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare 4 QUASAR 2 LED 40W di colore nero occorrono:To make 4 QUASAR 2 LED 40W black colour you require:
QUASAR 40W 1 pezziQUASAR 40W pieces
Schermi diffusori 1 pezziDiffusers pieces
Kit sospensioni 1 pezziSuspension kit pieces
QU12301
SV864
SV918
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 26501 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
QUASAR 2
FLUORESCENTE A LUCE DIRETTA T5 - FLUORESCENT T5 DIRECT LIGHT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOQU131XX 2x24W 582x97x62 1,1 kgQU132XX 2x39W 882x97x62 1,5 kgQU133XX 2x49W 1482x97x62 2,5 kgQU134XX 2x54W 1182x97x62 2,0 kgQU135XX 2x80W 1482x97x62 2,5 kg
HE QU136XX 2x14W 582x97x62 1,1 kgQU137XX 2x21W 882x97x62 1,5 kgQU138XX 2x28W 1182x97x62 2,0 kgQU139XX 2x35W 1482x97x62 2,5 kg
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
QU121XX 20W 2500 lm 3000K 571x97x62 1,0 kgQU122XX 20W 2500 lm 4000K 571x97x62 1,0 kgQU123XX 40W 5000 lm 3000K 1111x97x62 1,9 kgQU124XX 40W 5000 lm 4000K 1111x97x62 1,9 kgQU125XX 60W 7500 lm 3000K 1651x97x62 2,8 kgQU126XX 60W 7500 lm 4000K 1651x97x62 2,8 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
Compreso di kit attacco a soffitto. Se si necessita di sospensione ordinarla a parte.
Ceiling connection kit inclued. If suspension needed, order apart.
Compreso di kit attacco a soffitto. Se si necessita di sospensione ordinarla a parte. I corpi illuminanti sono cablati con unico reattore.
ceiling connection kit inclued. If suspension needed, order apart. Fittings are wired with one single ballast.
IP20 IK05
IP20 IK05
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1100mm x 65mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4000.00 lm
Massimo 335.58 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 86.11%
Data: 23-07-2014
Doppia Simmetria
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
90
270
180
1182mm x 152mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 10000.00 lm
Massimo 326.61 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 56.41%
Data: 02-08-2005
Simmetrico 0-180
NEW
266 Plexiform 01 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
Schermo diffusore opalino per QUASAR 2 T5 In policarbonato autoestinguente prismatizzato opale, fissaggio a scatto. Permette di ridurre l’abbagliamento.
Opal QUASAR 2 T5 diffuser In prismatized opal self-extinguishing polycarbonate, snap on fixture. Reduces dazzle.
Ottica antiriflesso per QUASAR 1 LED UGR<19 Lamellare in alluminio speculare preanodizzato antiriflesso, a bassissima iridescenza, a bassa luminanza e ad alto rendimento, fissaggio a scatto. Adatta per uffici con videoterminali.
Antireflection QUASAR 1 LED optic UGR<19 Laminated specular pre-anodized aluminium, antiglare with low iridescence, low luminance and high efficency, snap on fixture. Suitable for offices with VDUs.
QUASAR Accessori Accessories
Ottica antiriflesso per QUASAR 1 T5 UGR<19 Lamellare in alluminio speculare preanodizzato antiriflesso, a bassissima iridescenza, a bassa luminanza e ad alto rendimento, fissaggio a scatto. Adatta per uffici con videoterminali.
Antireflection QUASAR 1 T5 optic UGR<19 Laminated specular pre-anodized aluminium, antiglare with low iridescence, low luminance and high efficency, snap on fixture. Suitable for offices with VDUs.
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Schermo diffusore opalino per QUASAR 2 LED In policarbonato autoestinguente prismatizzato opale, fissaggio a scatto. Permette di ridurre l’abbagliamento.
Opal QUASAR 2 LED diffuser In prismatized opal self-extinguishing polycarbonate, snap on fixture. Reduces dazzle.
Schermo diffusore opalino per QUASAR 1 T5 In policarbonato autoestinguente prismatizzato opale, fissaggio a scatto. Permette di ridurre l’abbagliamento.
Opal QUASAR 1 T5 diffuser In prismatized opal self-extinguishing polycarbonate, snap on fixture. Reduces dazzle.
Schermo diffusore opalino per QUASAR 1 LED In policarbonato autoestinguente prismatizzato opale, fissaggio a scatto. Permette di ridurre l’abbagliamento.
Opal QUASAR 1 LED diffuser In prismatized opal self-extinguishing polycarbonate, snap on fixture. Reduces dazzle.
Kit sospensione Coppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile. Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kitPair of chromed brass ceiling roses, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Allows adjustable installation height of the suspension. For simple and electrified ceiling roses go to page 336-337.
SV918 Ø16x44
44
Ø 16
SV857 565 mm - 18WSV858 1105 mm - 36WSV859 1645 mm - 54W
2
60
565-1105-1645
SV819 575 mm - 1x14/24WSV820 875 mm - 1x21/39WSV821 1175 mm - 1x28/54WSV822 1475 mm - 1x35/49/80W
2
60
575-875-1175-1475
SV823 575 mm - 2x14/24WSV824 875 mm - 2x21/39WSV825 1175 mm - 2x28/54WSV826 1475 mm - 2x35/49/80W
2
98
575-875-1175-1475
SV863 565 mm - 20WSV864 1105 mm - 40WSV865 1645 mm - 60W
2
98
565-1105-1645
SV860 565x60x32 - 18WSV861 1105x60x32 - 36WSV862 1645x60x32 - 54W
60
32
SV829 575x60x32 - 1x14/24WSV830 875x60x32 - 1x21/39WSV831 1175x60x32 - 1x28/54WSV832 1475x60x32 - 1x35/49/80W
60
32
Plexiform 26701 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
QUASAR
268 Plexiform
Apparecchio con illuminazione fluorescente, per interni, ad emissione diretta.Installazione a soffitto o sospensione.Corpo in lamiera di acciaio.Schermo diffusore in policarbonato opale autoestinguente per ridurre l’abbagliamento.Riflettore in alluminio speculare.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.Colorazioni e misure speciali.
Fluorescent fitting for indoor use direct light.Ceiling or suspension mounted.Sheet steel body.Internally splined self-extinguishing opal polycarbonate diffuser. Reduce dozzle.Laminated specular aluminium reflector.Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic ballast.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and following amendments. Product complies RoHS standards.
On request:Wiring with switch dim or DALI dimmable ballast.Bespoke colours, bespoke measurements.
EASYSoffittoCeiling
SospensioneSuspension
NEW
Plexiform 269
EASY
CORPO ILLUMINANTELIGHTING FITTING
KIT SOSPENSIONESUSPENSION KIT
SCHERMO DIFFUSOREDIFFUSER
OTTICA ANTIRIFLESSOANTIREFLECTION OPTIC
KIT ATTACCO A SOFFITTO IN DOTAZIONECEILING CONNECTION KIT INCLUDED
270 Plexiform
50
200
EASY SCHERMO DIFFUSORE
Versione con schermo diffusoreVersion with diffuser
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Kit attacco a soffitto in dotazione. Se si necessita di sospensione
ordinarla a parte
SINGLE MOUNTING All fittings must be completed with:- Ceiling connection kit included. If suspension needed, order apart
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare 1 EASY 2x28W di colore nero con schermo occorrono:To make 1 EASY 2x28W black colour with diffuser you require:
EASY 2x28W con schermo 1 pezziEASY 2x28W with diffuser pieces
Kit sospensione 1 pezziSuspension kit pieces
EY12601
SV926
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 27101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
SCHERMO DIFFUSORE EASYFLUO T5 A LUCE DIRETTA CON SCHERMO DIFFUSORE – DIRECT LIGHT T5 FLUO WITH DIFFUSER
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEY110XX 1x24W 575x200x50 1,3 kgEY111XX 1x39W 875x200x50 1,8 kgEY112XX 1x49W 1475x200x50 2,8 kgEY113XX 1x54W 1175x200x50 2,3 kgEY114XX 1x80W 1475x200x50 2,8 kg
EY115XX 2x24W 575x200x50 1,5 kgEY116XX 2x39W 875x200x50 2,0 kgEY117XX 2x49W 1475x200x50 3,0 kgEY118XX 2x54W 1175x200x50 2,5 kgEY119XX 2x80W 1475x200x50 3,0 kg
HE EY120XX 1x14W 575x200x50 1,3 kgEY121XX 1x21W 875x200x50 1,8 kgEY122XX 1x28W 1175x200x50 2,3 kgEY123XX 1x35W 1475x200x50 2,8 kg
EY124XX 2x14W 575x200x50 1,5 kgEY125XX 2x21W 875x200x50 2,0 kgEY126XX 2x28W 1175x200x50 2,5 kgEY127XX 2x35W 1475x200x50 3,0 kg
Compreso di kit attacco a soffitto.Se si necessita di sospensione ordinarla a parte
Ceiling connection kit inclued.
If suspended order suspension accessories separately.
IP20 IK05
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
NEW
ACCESSORI - ACCESSORIES
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit sospensione doppia Due coppie di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Double suspension kit Two pairs of brass chrome ceiling rose, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Makes it possible the suspension of the fittings adjustable.For simple and electrified ceiling roses go to page 336-337.
SV919 Ø16x44
44
Ø 16
Kit sospensione Coppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile. Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kit Pair of chromed brass ceiling roses, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Allows adjustable installation height of the suspension. For simple and electrified ceiling roses go to page 336-337.
SV926 Ø16x44 Ø 16
44
272 Plexiform
EASY OTTICA ANTIRIFLESSO
50
200
Versione con ottica antiriflessoVersion with antireflection optic
MONTAGGIO SINGOLO I corpi illuminanti dovranno essere completati con:- Kit attacco a soffitto in dotazione. Se si necessita di sospensione
ordinarla a parte
SINGLE MOUNTING All fittings must be completed with:- Ceiling connection kit included. If suspension needed, order apart
COLORI COLOURSSostituire XX con il codice colore desiderato:
01 = NERO OPACO02 = BIANCO OPACO03 = GRIGIO OPACO
Replace XX with desired colour code:
01 = MATT BLACK02 = MATT WHITE03 = MATT GREY
COME PERSONALIZZARE IL VOSTRO ORDINEHOW TO CUSTOMIZE YOUR ORDER
Per realizzare 1 EASY 2x28W di colore nero con ottica occorrono:To make 1 EASY 2x28W black colour with optic you require:
EASY 2x28W con ottica 1 pezziEASY 2x28W with optic pieces
Kit sospensione 1 pezziSuspension kit pieces
EY15601
SV926
ESEMPIO D’ORDINE
EXAMPLE OF ORDER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 27301 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
OTTICA ANTIRIFLESSO EASYFLUORESCENTE T5 A LUCE DIRETTA CON OTTICA – DIRECT LIGHT T5 FLUORESCENT WITH OPTIC
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOEY140XX 1x24W 575x200x50 1,2 kgEY141XX 1x39W 875x200x50 1,7 kgEY142XX 1x49W 1475x200x50 2,7 kgEY143XX 1x54W 1175x200x50 2,2 kgEY144XX 1x80W 1475x200x50 2,7 kg
EY145XX 2x24W 575x200x50 1,4 kgEY146XX 2x39W 875x200x50 1,9 kgEY147XX 2x49W 1475x200x50 2,9 kgEY148XX 2x54W 1175x200x50 2,4 kgEY149XX 2x80W 1475x200x50 2,9 kg
HE EY150XX 1x14W 575x200x50 1,2 kgEY151XX 1x21W 875x200x50 1,7 kgEY152XX 1x28W 1175x200x50 2,2 kgEY153XX 1x35W 1475x200x50 2,7 kg
EY154XX 2x14W 575x200x50 1,4 kgEY155XX 2x21W 875x200x50 1,9 kgEY156XX 2x28W 1175x200x50 2,4 kgEY157XX 2x35W 1475x200x50 2,9 kg
Compreso di kit attacco a soffitto.Se si necessita di sospensione ordinarla a parte
Ceiling connection kit inclued.If suspension needed, order apart
IP20 IK05
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 253.69 cd/klm
Posizione C=0.00 G=35.00
Rendimento: 72.13%
Data: 09-07-2009
Asimmetrico
NEW
ACCESSORI - ACCESSORIES
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Kit sospensione doppia Due coppie di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile.Per rosoni semplici ed elettrificati vedere pag. 336-337.
Double suspension kit Two pairs of brass chrome ceiling rose, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Makes it possible the suspension of the fittings adjustable.For simple and electrified ceiling roses go to page 336-337.
SV919 Ø16x44
44
Ø 16
Kit sospensione Coppia di rosoni in ottone cromato, con funi in acciaio 1500 mm. Dispositivo per regolazione millimetrica. Carico massimo 7kg per fune. Permette la sospensione dei moduli regolabile. Per rosoni semplici ed elettrificati vedere pag. 336-337.
Suspension kit Pair of chromed brass ceiling roses, with wire ropes 1500 mm. Device for millimetric regulation. Maximum load 7kg per rope. Allows adjustable installation height of the suspension. For simple and electrified ceiling roses go to page 336-337.
SV926 Ø16x44 Ø 16
44
274 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni, ad emissione diretta. Installazione a soffitto.Corpo in lamiera di acciaio. Schermo opalino. Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico. I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 130 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K. Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.
LED or fluorescent fitting for indoor use. Ceiling mounted.Sheet steel body. Opal diffuser. Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic ballast.Our LED, series 5630, are powered by constant current drivers, efficiency 130 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with switch dim or DALI dimmable ballast.
FINESTRA
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Finestra T5 96W 200
Finestra LED 50W 462
100100%consumo
consumption
EnergySaving
48%
52%consumo
consumption
10
20
30
40
50
60
70
80
90
Finestra T596W
Finestra LED50W
SoffittoCeiling
Plexiform 275
FINESTRA
FLUORESCENTE T5 A LUCE DIRETTA - DIRECT LIGHT T5 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOFI111 4x24W 715x715x70 6,0 kg
HE FI112 4x14W 715x715x70 6,0 kg
Gli apparecchi sono cablati con un unico reattore.Vengono forniti completi di schermo opalino.
Fittings wired with one single ballast.Fittings supplied with flat opal diffuser.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
FI101 50W 6000 lm 3000K 715x715x70 6,0 kgFI102 50W 6000 lm 4000K 715x715x70 6,0 kg
LED A LUCE DIRETTA - DIRECT LIGHT LED
Completi di schermo opalino.
Supplied with flat opal diffuser.
70
715
IP40 IK06
IP40 IK06
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
596mm x 596mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6000.00 lm
Massimo 337.03 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 95.44%
Data: 16-07-2014
Doppia Simmetria
30
30
60
90
120
150
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
715mm x 715mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 7000.00 lm
Massimo 132.64 cd/klm
Posizione C=80.00 G=0.00
Rendimento: 43.44%
Data: 12-06-2008
Doppia Simmetria
NEW
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
276 Plexiform
FINESTRA
65
407
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
FI121 16W 2100 lm 3000K 407x407x65 3,8 kgFI122 16W 2100 lm 4000K 407x407x65 3,8 kg
LED A LUCE DIRETTA - DIRECT LIGHT LED
Completi di schermo opalino.
Supplied with flat opal diffuser.
IP40 IK06
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
382mm x 382mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 2800.00 lm
Massimo 351.71 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 100.25%
Data: 17-07-2014
Doppia Simmetria
NEW
FLUORESCENTE T-R CNR A LUCE DIRETTA – DIRECT LIGHT T-R FLUORESCENT CNR FITTING
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOFI131 1x32W 407x407x65 3,8 kg
Completi di schermo opalino, alimentatore ferromagnetico, starter e condensatore.
Supplied with flat opal diffuser, ferro-magnetic ballast, starter and capacitor.
IP40 IK06
30
30
60
90
120
150
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
715mm x 715mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 4800.00 lm
Massimo 132.64 cd/klm
Posizione C=80.00 G=0.00
Rendimento: 43.44%
Data: 12-06-2008
Doppia Simmetria
FLUORESCENTE TC-L A LUCE DIRETTA – DIRECT LIGHT TC-L FLUORESCENT FITTING
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HEFI132 2x24W 407x407x65 3,8 kg
Completi di schermo opalino.
Supplied with flat opal diffuser.
IP40 IK06
60
60
120
180
240
300
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
270
0
180
90
400mm x 400mm
Semipiani C
270.0
180.0 0.0
90.0
Flusso 3600.00 lm
Massimo 241.92 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 69.24%
Data: 12-06-2008
Simmetrico 90-270
Plexiform 27701 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
278 Plexiform
Apparecchio con illuminazione fluorescente per interni.Ad emissione diretta o indiretta.Installazione ad incasso per controsoffitti con struttura a vista (a T rovesciata).Corpo in lamiera di acciaio.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.Le versioni SLA e PAR-ECO ottengono un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.
Fluorescent fitting for indoor use.Direct or indirect light. Recessed mounting for false ceiling with exposed structure (upside-down T).Sheet steel body.Baked with epoxy powder coatings, resistant to damp enviroments and UV-ray stabilized.Supplied with electronic ballast.SLA and PAR-ECO versions obtain UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and following amendments. Product complies RoHS standards.
On request:Wiring with switch dim or DALI dimmable ballast.
ROMA
IP65
IncassoRecessed
UGR<19
Plexiform 27901 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
SLA ROMA
90
290-595
FLUORESCENTE T8 A LUCE DIRETTA SLA – SLA DIRECT LIGHT T8 FLUORESCENT
Completi di schermo lamellare in alluminio speculare.Gli apparecchi sono cablati con unico reattore. Gli apparecchi 4x36W sono cablati con due reattori.
Supplied with louvre in mirror-like aluminium.Fittings are wired with one single ballas. The 4x36W fittings are wired with 2 ballasts.
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
RO121 2x18W 595x290x90 2,8 kgRO122 2x36W 1195x290x90 4,9 kg
RO123 4x18W 595x595x90 4,8 kgRO124 4x36W 1195x595x90 9,2 kg
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
IP20 IK05
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 600mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5400.00 lm
Massimo 315.45 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 65.48%
Data: 18-03-1997
Doppia Simmetria
UGR<19
280 Plexiform
ROMA OTTICHE DISTANZIATE
FLUO T5 A LUCE DIRETTA CON OTTICHE DISTANZIATE - DIRECT LIGHT T5 FLUO WITH SPACED OPTICS
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HORO101 2x54W 1195x296x56 4,1 kgRO102 4x24W 596x596x56 4,3 kg
HERO103 2x28W 1195x296x56 4,1 kgRO104 4x14W 596x596x56 4,3 kg
Completi di ottiche paraboliche in alluminio speculare antiriflesso a bassa luminanza, per uffici con videoterminali. Gli apparecchi sono cablati con unico reattore.
Supplied with optics in mirror-like aluminium, antireflection, low luminance, for offices with VDUs.Fittings are wired with one single ballas.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
56
296-596
IP20 IK05
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
595mm x 595mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 7000.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
Plexiform 28101 nero opaco matt black 02 bianco opaco matt white 03 grigio opaco matt grey
FLUORESCENTE T8 A LUCE DIRETTA PAR-ECO – DIRECT LIGHT T8 FLUORESCENT PAR-ECO
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
RO111 2x18W 595x290x90 2,8 kgRO112 2x36W 1195x290x90 4,9 kg
RO113 4x18W 595x595x90 4,8 kgRO114 4x36W 1195x595x90 9,2 kg
Completi di ottiche lamellari paraboliche in alluminio speculare antiriflesso a bassa luminanza, per uffici con videoterminali.Gli apparecchi sono cablati con unico reattore. Gli apparecchi 4x36W sono cablati con due reattori.
Supplied with louvres in mirror-like aluminium, antireflection, low luminance, for offices with VDUs.Fittings are wired with one single ballas. The 4x36W fittings are wired with 2 ballasts.
PAR ECO ROMA
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
90
290-595
IP20 IK05
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 600mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5400.00 lm
Massimo 374.77 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 65.60%
Data: 08-02-2001
Doppia Simmetria
UGR<19
282 Plexiform
ROMA SDP IP40
FLUORESCENTE T8 A LUCE DIRETTA SDP – SDP DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
RO131 2x18W 595x290x90 2,8 kgRO132 2x36W 1195x290x90 4,9 kg
RO133 4x18W 595x595x90 4,8 kg
Completi di schermo diffusore piano in metacrilato trasparente prismatizzato internamente. Gli apparecchi sono cablati con un unico reattore.
Supplied with flat diffuser in internally prismatized transparent methacrylate.The fittings are wired with one single ballast.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
90
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 600mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5400.00 lm
Massimo 205.11 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.64%
Data: 22-01-2001
Doppia Simmetria
IP40 IK05
290-595
Plexiform 283
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
SDP IP65 ROMA
FLUORESCENTE T8 A LUCE DIRETTA SDP IP65 – SDP IP65 DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
RO141 2x18W 598x296x112 3,4 kgRO142 2x36W 1191x296x112 6,7 kg
RO143 4x18W 595x598x112 6,2 kg
Completi di schermo diffusore piano in metacrilato trasparente prismatizzato internamente. Gli apparecchi sono cablati con un unico reattore.
Supplied with flat diffuser in internally prismatized transparent methacrylate.The fittings are wired with one single ballast.
112
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 600mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5400.00 lm
Massimo 205.11 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.64%
Data: 22-01-2001
Doppia Simmetria
IP65 IK05
296-598
284 Plexiform
ROMA TC-L INDIRETTA LISCIA
FLUORESCENTE TC-L A LUCE INDIRETTA – INDIRECT LIGHT TC-L FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
RO151 2x55W 595x595x100 5,5 kg
Gli apparecchi sono cablati con un unico reattore.The fittings are wired with one single ballast.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
100
595
30
30
60
90
120
150
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
625mm x 625mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8400.00 lm
Massimo 141.72 cd/klm
Posizione C=0.00 G=35.00
Rendimento: 42.22%
Data: 08-08-2004
Doppia Simmetria IP20 IK05
Plexiform 285
TC-L INDIRETTA MICROFORATA ROMA
FLUO TC-L A LUCE INDIRETTA CON GRIGLIA MICROFORATA – INDIRECT LIGHT TC-L FLUO WITH MICRO-PUNCHED DIFFUSER
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
RO152 2x55W 595x595x100 5,5 kg
Gli apparecchi sono cablati con un unico reattore.The fittings are wired with one single ballast.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
100
595
30
30
60
90
120
150
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
625mm x 625mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8400.00 lm
Massimo 141.72 cd/klm
Posizione C=0.00 G=35.00
Rendimento: 42.22%
Data: 08-08-2004
Doppia Simmetria IP20 IK05
286 Plexiform
Apparecchio con illuminazione fluorescente.A luce diretta o indiretta.Installazione a soffitto.Corpo in lamiera di acciaio.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.Le versioni SLA e PAR-ECO ottengono un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.
Fluorescent fitting for indoor use.Direct or indirect light.Ceiling mounted.Sheet steel body.Baked with epoxy powder coatings, resistant to damp enviroments and UV-ray stabilized.Supplied with electronic ballast.SLA and PAR-ECO versions obtain UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and following amendments.Product complies RoHS standards.
On request:Wiring with switch dim or DALI dimmable ballast.
TORINOSoffittoCeiling
IP65UGR<19
Plexiform 287
SLA TORINO
FLUORESCENTE T8 A LUCE DIRETTA SLA – SLA DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
TO121 1x36W 1233x180x90 3,5 kgTO122 1x58W 1533x180x90 4,5 kg
TO123 2x18W 618x306x90 3,1 kgTO124 2x36W 1225x306x90 5,3 kgTO125 2x58W 1525x306x90 7,4 kg
TO126 4x18W 618x610x90 5,3 kgTO127 4x36W 1225x610x90 9,8 kg
Completi di schermo lamellare in alluminio speculare.Gli apparecchi sono cablati con unico reattore. Gli apparecchi 4x36W sono cablati con due reattori.
Supplied with louvre in mirror-like aluminium.Fittings are wired with one single ballas. The 4x36W fittings are wired with 2 ballasts.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
90
180-306-610
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 600mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 5400.00 lm
Massimo 315.45 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 65.48%
Data: 18-03-1997
Doppia Simmetria
IP20 IK05
UGR<19
288 Plexiform
TORINO OTTICHE DISTANZIATE
FLUO T5 A LUCE DIRETTA CON OTTICHE DISTANZIATE – DIRECT LIGHT T5 FLUO WITH SPACED OPTICS
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOTO101 4x24W 594x594x54 3,1 kg
HETO102 4x14W 594x594x54 3,1 kg
Completi di ottiche lamellari paraboliche in alluminio speculare antiriflesso a bassa luminanza, per uffici con videoterminali. Gli apparecchi sono cablati con unico reattore.
Supplied with louvres in mirror-like aluminium, antireflection, low luminance, for offices with VDUs.Fittings are wired with one single ballas.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
54
594
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
595mm x 595mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 7000.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
IP20 IK05
Plexiform 289
FLUORESCENTE T8 A LUCE DIRETTA PAR-ECO – DIRECT LIGHT T8 FLUORESCENT PAR-ECO
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
TO111 1x36W 1293x180x90 3,5 kgTO112 1x58W 1533x180x90 4,5 kg
TO113 2x18W 618x306x90 3,1 kgTO114 2x36W 1225x306x90 5,3 kgTO115 2x58W 1525x306x90 7,4 kg
TO116 4x18W 618x610x90 5,3 kgTO117 4x36W 1225x610x90 9,8 kg
PAR ECO TORINO
Completi di ottiche lamellari paraboliche in alluminio speculare antiriflesso a bassa luminanza, per uffici con videoterminali. Gli apparecchi sono cablati con unico reattore. Gli apparecchi 4x36W sono cablati con due reattori.
Supplied with louvres in mirror-like aluminium, antireflection, low luminance, for offices with VDUs.Fittings are wired with one single ballas. The 4x36W fittings are wired with 2 ballasts.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 600mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5400.00 lm
Massimo 374.77 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 65.60%
Data: 08-02-2001
Doppia Simmetria
IP20 IK05
90
180-306-610
UGR<19
290 Plexiform
TORINO SDP IP40
FLUORESCENTE T8 A LUCE DIRETTA SDP – SDP DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
TO131 2x18W 615x306x90 3,2 kgTO132 2x36W 1225x306x90 6,0 kg
TO133 4x18W 615x615x90 5,6 kg
Completi di schermo diffusore piano in metacrilato trasparente prismatizzato internamente. Gli apparecchi sono cablati con un unico reattore.
Supplied with flat diffuser in internally prismatized transparent methacrylateThe fittings are wired with one single ballast.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
90
306-615
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 600mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5400.00 lm
Massimo 205.11 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.64%
Data: 22-01-2001
Doppia Simmetria
IP40 IK05
Plexiform 291
SDP IP65 TORINO
FLUORESCENTE T8 A LUCE DIRETTA SDP IP65 – SDP IP65 DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
TO141 2x18W 616x315x95 3,2 kgTO142 2x36W 1222x315x95 6,7 kg
TO143 4x18W 616x616x95 6,1 kg
Completi di schermo diffusore piano in metacrilato trasparente prismatizzato internamente. Gli apparecchi sono cablati con un unico reattore.
Supplied with flat diffuser in internally prismatized transparent methacrylateThe fittings are wired with one single ballast.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
95
315-616
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 600mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5400.00 lm
Massimo 205.11 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.64%
Data: 22-01-2001
Doppia Simmetria
IP65 IK05
292 Plexiform
TORINO TC-L INDIRETTA LISCIA
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
TO151 2x55W 602x602x92 5,5 kg
Gli apparecchi sono cablati con unico reattore.
The fittings are wired with one single ballast.
FLUORESCENTE TC-L A LUCE INDIRETTA – INDIRECT LIGHT TC-L FLUORESCENT
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
92
602
30
30
60
90
120
150
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
625mm x 625mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8400.00 lm
Massimo 141.72 cd/klm
Posizione C=0.00 G=35.00
Rendimento: 42.22%
Data: 08-08-2004
Doppia Simmetria IP20 IK05
Plexiform 293
TC-L INDIRETTA MICROFORATA TORINO
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
TO152 2x55W 602x602x92 5,5 kg
Gli apparecchi sono cablati con unico reattore.
The fittings are wired with one single ballast.
FLUO TC-L A LUCE INDIRETTA CON GRIGLIA MICROFORATA – INDIRECT LIGHT TC-L FLUO WITH MICRO-PUNCHED DIFFUSER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
92
602
30
30
60
90
120
150
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
625mm x 625mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8400.00 lm
Massimo 141.72 cd/klm
Posizione C=0.00 G=35.00
Rendimento: 42.22%
Data: 08-08-2004
Doppia Simmetria IP20 IK05
294 Plexiform
Apparecchio con illuminazione fluorescente.A luce diretta o indiretta.Installazione ad incasso per cartongesso.Corpo in lamiera di acciaio.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.Le versioni SLA e PAR-ECO ottengono un UGR <19, permettendone l’uso con i videoterminali.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.
Fluorescent fitting for indoor use.Direct or indirect light.Recessed mounting for plasterboard false ceiling.Sheet steel body.Baked with epoxy powder coatings, resistant to damp enviroments and UV-ray stabilized.Supplied with electronic ballast.SLA and PAR-ECO versions obtain UGR <19 and can be used with VDU’s.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and following amendments.Product complies RoHS standards.
On request:Wiring with switch dim or DALI dimmable ballast.
PISA
IP65
IncassoRecessed
UGR<19
Plexiform 295
SLA PISA
FLUORESCENTE T8 A LUCE DIRETTA SLA – SLA DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PI121 2x18W 622x324x90 3,1 kgPI122 2x36W 1227x324x90 5,6 kg
PI123 4x18W 622x622x90 5,4 kgPI124 4x36W 1227x622x90 10,5 kg
Completi di schermo lamellare in alluminio speculare.Gli apparecchi sono cablati con unico reattore. Gli apparecchi 4x36W sono cablati con due reattori.
Supplied with louvre in mirror-like aluminium.Fittings are wired with one single ballas. The 4x36W fittings are wired with 2 ballasts.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
90
324-622
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 600mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5400.00 lm
Massimo 315.45 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 65.48%
Data: 18-03-1997
Doppia Simmetria
IP20 IK05
UGR<19
296 Plexiform
PISA OTTICHE DISTANZIATE
FLUO T5 A LUCE DIRETTA CON OTTICHE DISTANZIATE – DIRECT LIGHT T5 FLUO WITH SPACED OPTICS
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOPI101 2x54W 1195x296x56 4,1 kgPI102 4x24W 596x596x56 4,3 kg
HEPI103 2x28W 1195x296x56 4,1 kgPI104 4x14W 596x596x56 4,3 kg
Completi di ottiche lamellari paraboliche in alluminio speculare antiriflesso a bassa luminanza, per uffici con videoterminali. Gli apparecchi sono cablati con unico reattore.
Supplied with louvres in mirror-like aluminium, antireflection, low luminance, for offices with VDUs.Fittings are wired with one single ballas.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
56
296-596
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
595mm x 595mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 7000.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
IP20 IK05
Plexiform 297
PAR ECO PISA
FLUORESCENTE T8 A LUCE DIRETTA PAR-ECO – DIRECT LIGHT T8 FLUORESCENT PAR-ECO
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PI111 2x18W 622x324x90 3,1 kgPI112 2x36W 1227x324x90 5,6 kg
PI113 4x18W 622x622x90 5,4 kgPI114 4x36W 1227x622x90 10,5 kg
Completi di ottiche lamellari paraboliche in alluminio speculare antiriflesso a bassa luminanza, per uffici con videoterminali. Gli apparecchi sono cablati con unico reattore. Gli apparecchi 4x36W sono cablati con due reattori.
Supplied with louvres in mirror-like aluminium, antireflection, low luminance, for offices with VDUs.Fittings are wired with one single ballas. The 4x36W fittings are wired with 2 ballasts.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
80
80
160
240
320
400
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 600mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 5400.00 lm
Massimo 374.77 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 65.60%
Data: 08-02-2001
Doppia Simmetria
IP20 IK05
90
324-622
UGR<19
298 Plexiform
PISA SDP IP40
FLUORESCENTE T8 A LUCE DIRETTA SDP IP40 – SDP IP40 DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PI131 2x18W 622x324x90 3,6 kgPI132 2x36W 1227x324x90 6,3 kg
PI133 4x18W 622x622x90 6,6 kg
Completi di schermo diffusore piano in metacrilato trasparente prismatizzato internamente. Gli apparecchi sono cablati con un unico reattore.
Supplied with flat diffuser in internally prismatized transparent methacrylateThe fittings are wired with one single ballast.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
90
324-622
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 600mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5400.00 lm
Massimo 205.11 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.64%
Data: 22-01-2001
Doppia Simmetria
IP40 IK05
Plexiform 299
SDP IP65 PISA
FLUORESCENTE T8 A LUCE DIRETTA SDP IP65 – SDP IP65 DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PI141 2x18W 600x300x115 3,6 kgPI142 2x36W 1200x300x115 7,2 kg
PI143 4x18W 600x600x115 6,6 kg
Completi di schermo diffusore piano in metacrilato trasparente prismatizzato internamente. Gli apparecchi sono cablati con un unico reattore.
Supplied with flat diffuser in internally prismatized transparent methacrylateThe fittings are wired with one single ballast.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
115
300-600
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
600mm x 600mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5400.00 lm
Massimo 205.11 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.64%
Data: 22-01-2001
Doppia Simmetria
IP65 IK05
300 Plexiform
PISA TC-L INDIRETTA LISCIA
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PI151 2x55W 624x624x100 5,8 kg
Gli apparecchi sono cablati con unico reattore.
The fittings are wired with one single ballast.
FLUORESCENTE TC-L A LUCE INDIRETTA – INDIRECT LIGHT TC-L FLUORESCENT
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
100
624
30
30
60
90
120
150
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
625mm x 625mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8400.00 lm
Massimo 141.72 cd/klm
Posizione C=0.00 G=35.00
Rendimento: 42.22%
Data: 08-08-2004
Doppia Simmetria IP20 IK05
Plexiform 301
TC-L INDIRETTA MICROFORATA PISA
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PI152 2x55W 624x624x100 5,8 kg
Gli apparecchi sono cablati con unico reattore.
The fittings are wired with one single ballast.
FLUO TC-L A LUCE INDIRETTA CON GRIGLIA MICROFORATA – INDIRECT LIGHT TC-L FLUO WITH MICRO-PUNCHED DIFFUSER
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.
EMERGENCY KITEM
100
624
30
30
60
90
120
150
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
625mm x 625mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8400.00 lm
Massimo 141.72 cd/klm
Posizione C=0.00 G=35.00
Rendimento: 42.22%
Data: 08-08-2004
Doppia Simmetria IP20 IK05
302 Plexiform
Apparecchio con illuminazione fluorescente.Installazione a soffitto.Corpo in lamiera di acciaio e testate in policarbonato autoestinguente.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.
Fluorescent fitting for indoor use.Ceiling mounted.Sheet steel body and self-extinguishing polycarbonate end caps.Baked with epoxy powder coatings, resistant to damp enviroments and UV-ray stabilized.Supplied with electronic ballast.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and following amendments. Product complies RoHS standards.
On request:Wiring with switch dim or DALI dimmable ballast.
MONZASoffittoCeiling
Plexiform 303
SDP MONZA
FLUORESCENTE T5 A LUCE DIRETTA - DIRECT LIGHT T5 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOMZ111 2x24W 619x223x50 1,8 kgMZ112 2x39W 919x223x50 2,7 kgMZ113 2x49W 1519x223x50 4,4 kgMZ114 2x54W 1219x223x50 3,6 kgMZ115 2x80W 1519x223x50 4,4 kg
HEMZ116 2x14W 619x223x50 1,8 kgMZ117 2x21W 919x223x50 2,7 kgMZ118 2x28W 1219x223x50 3,6 kgMZ119 2x35W 1519x223x50 4,4 kg
Completi di schermo opalino.
Supplied with flat opal diffuser.
IP20 IK05
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 175.49 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 54.73%
Data: 09-07-2009
Asimmetrico
223
50
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
304 Plexiform
MONZA PAR
FLUORESCENTE T8 A LUCE DIRETTA CON OTTICHE - DIRECT LIGHT WITH OPTICS T8 FLUORESCENT
Completi di ottiche lamellari paraboliche in alluminio speculare antiriflesso a bassa luminanza, per uffici con videoterminali.
Supplied with louvres in mirror-like aluminium, antireflection, low luminance, for offices with VDUs.Fittings are wired with one single ballas.
IP20 IK05
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOMZ101 2x24W 619x223x50 1,7 kgMZ102 2x39W 919x223x50 2,5 kgMZ103 2x49W 1519x223x50 4,1 kgMZ104 2x54W 1219x223x50 3,3 kgMZ105 2x80W 1519x223x50 4,1 kg
HEMZ106 2x14W 619x223x50 1,7 kgMZ107 2x21W 919x223x50 2,5 kgMZ108 2x28W 1219x223x50 3,3 kgMZ109 2x35W 1519x223x50 4,1 kg
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1230mm x 250mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 253.69 cd/klm
Posizione C=0.00 G=35.00
Rendimento: 72.13%
Data: 09-07-2009
Asimmetrico
223
50
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 305
ASIMMETRICA MONZA
FLUORESCENTE T8 A LUCE DIRETTA ASIMMETRICA - DIRECT ASYMMETRIC LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
MZ121 1x36W 1233x193x75 3,3 kgMZ122 1x58W 1529x193x75 4,5 kg
IP20 IK05Angoli Gamma
100
300
180˚150˚
120˚
90˚
60˚
120˚
90˚
60˚
150˚
0˚30˚ 30˚
cd/klm
200
193
75
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
306 Plexiform
Apparecchio con illuminazione a LED o fluorescente per interni.Ad emissione diretta.Installazione a soffitto.Corpo in lamiera di acciaio.Schermo prismatizzato esternamente, stampato sottovuoto.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 130 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.
LED or fluorescent fitting for indoor use.Ceiling mounted.Sheet steel body.Prismatized diffuser on the outside, vacuum moulded.Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic ballast.Our LED, series 5630, are powered by constant current drivers, efficiency 130 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with switch dim or DALI dimmable ballast.
SMERALDOSoffittoCeiling
Plexiform 307
SMERALDO
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Smeraldo T5 32W 207
Smeraldo LED 16W 213
100%consumo
consumption
EnergySaving
50%
50%consumo
consumption
100
10
20
30
40
50
60
70
80
90
Smeraldo T532W
Smeraldo LED16W
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
308 Plexiform
Versione LEDLED Version
65
275-400-665
QUADRATA - SQUARE
SMERALDO
FLUORESCENTE T8 A LUCE DIRETTA – DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
SM142 1x22W 275x275x65 1,2 kgSM143 1x32W 400x400x65 2,1 kg
SM141 4x18W 665x665x65 4,8 kg
Gli apparecchi 4x18W sono cablati con unico reattore.
4x18W fittings are wired with one single ballast.
50
50
100
150
200
250
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
665mm x 665mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5400.00 lm
Massimo 210.46 cd/klm
Posizione C=0.00 G=25.00
Rendimento: 72.30%
Data: 04-07-2003
Doppia Simmetria IP40 IK05
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
SM123 16W 2100 lm 3000K 400x400x65 4,8 kgSM124 16W 2100 lm 4000K 400x400x65 4,8 kg
SM121 50W 6000 lm 3000K 665x665x65 4,8 kgSM122 50W 6000 lm 4000K 665x665x65 4,8 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
IP40 IK05
NEW
Plexiform 309
65
195-295110
RETTANGOLARE - RECTANGULAR
FLUORESCENTE T8 A LUCE DIRETTA – DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
SM131 1x18W 665x110x65 1,2 kgSM132 1x36W 1270x110x65 1,9 kgSM133 1x58W 1570x110x65 2,4 kg
SM134 2x18W 665x195x65 1,7 kgSM135 2x36W 1270x195x65 2,8 kgSM136 2x58W 1570x195x65 3,2 kg
SM137 3x36W 1270x295x65 4,9 kg
Gli apparecchi bilampada sono cablati con unico reattore, quelli 3x36W con 2 reattori.
Two lamps fittings are wired with one single ballast, 3x36W fittings with 2 ballasts.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
SM101 12W 1300 lm 3000K 665x110x65 1,4 kgSM102 12W 1300 lm 4000K 665x110x65 1,4 kgSM103 24W 2600 lm 3000K 1270x110x65 2,1 kgSM104 24W 2600 lm 4000K 1270x110x65 2,1 kg
SM111 20W 2500 lm 3000K 665x195x65 1,8 kgSM112 20W 2500 lm 4000K 665x195x65 1,8 kgSM113 40W 5000 lm 3000K 1270x195x65 3,4 kgSM114 40W 5000 lm 4000K 1270x195x65 3,4 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1270mm x 200mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 177.45 cd/klm
Posizione C=15.00 G=10.00
Rendimento: 67.42%
Data: 04-07-2003
Doppia Simmetria
IP40 IK05
IP40 IK05
SMERALDO
NEW
310 Plexiform
Apparecchio con illuminazione a LED o fluorescente per interni.Ad emissione diretta.Installazione a soffitto.Corpo in lamiera di acciaio.Schermo rigato esternamente, stampato sottovuoto.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 130 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.
LED or fluorescent fitting for indoor use.Ceiling mounted.Sheet steel body.Internally splined diffuser, vacuum moulded.Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic ballast.Our LED, series 5630, are powered by constant current drivers, efficiency 130 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with switch dim or DALI dimmable ballast.
RUBINOSoffittoCeiling
Plexiform 311
70
180
FLUORESCENTE T8 A LUCE DIRETTA – DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
RU111 2x18W 640x180x70 1,5 kgRU112 2x36W 1250x180x70 2,9 kgRU113 2x58W 1550x180x70 4,1 kg
Gli apparecchi sono cablati con un unico reattore.
Two lamps fittings are wired with one single ballast.
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
RU101 20W 2500 lm 3000K 640x180x70 1,5 kgRU102 20W 2500 lm 4000K 640x180x70 1,5 kgRU103 40W 5000 lm 3000K 1250x180x70 2,9 kgRU104 40W 5000 lm 4000K 1250x180x70 2,9 kg
LED A LUCE DIRETTA – DIRECT LIGHT LED
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1135mm x 135mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 288.18 cd/klm
Posizione C=0.00 G=0.00
Rendimento: 79.95%
Data: 22-07-2014
Doppia Simmetria
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1270mm x 200mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 177.45 cd/klm
Posizione C=15.00 G=10.00
Rendimento: 67.42%
Data: 04-07-2003
Doppia Simmetria IP40 IK05
IP40 IK05
RUBINO
Versione LEDLED Version
NEW
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
312 Plexiform
Apparecchio con illuminazione a LED o fluorescente per interni.Ad emissione diretta.Installazione a soffitto o parete.Corpo in PVC di colore bianco.Schermo in policarbonato autoestinguente trasparente, rigato internamente.Alimentazione con scheda elettronica.Corredato di attacchi a soffitto e a parete, cavo di alimentazione da 1500 mm con spina 2x10A ed interuttore on/off.La versione a LED è disponibile in CCT 3000K e CCT 4000K.La versione fluorescente è già compresa di tubi con colorazione 830 e 840.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica, e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Cavetto flessibile per connessione in linea da 150 mm.
LED or fluorescent fitting for indoor us.Direct light.Ceiling or wall mounting.Body in white PVC.Internally splined transparent self-extinghuised polycarbonate diffuser.Supplied with electronic board.Supplied with ceiling connection and wall connections, 1500 mm power cable with plug 2x10A and on/off switch.LED fitting is available in CCT 3000K and CCT 4000K.Fluorescent fitting is suppplied with 830 and 840 colour temperature tube.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:150 mm flexible connection cable.
LINEALSistemaSystem
SoffittoCeiling
PareteWall
Plexiform 313
LED LINEAL
42
22
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
LL101 4W 330 lm 3000K 322x42x22 0,3 kgLL102 4W 330 lm 4000K 322x42x22 0,3 kgLL103 7W 650 lm 3000K 550x42x22 0,4 kgLL104 7W 650 lm 4000K 550x42x22 0,4 kgLL105 14W 1200 lm 3000K 883x42x22 0,5 kgLL106 14W 1200 lm 4000K 883x42x22 0,5 kgLL107 18W 1800 lm 3000K 1180x42x22 0,6 kgLL108 18W 1800 lm 4000K 1180x42x22 0,6 kg
LED A LUCE DIRETTA - DIRECT LIGHT LED
Compreso di kit attacco a soffitto e parete e cavo di alimentazione.
Ceiling and wall mounting kit and power supply included.
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Lineal T5 28W 62
Linal LED 18W 82
100%consumo
consumption
EnergySaving
35%
65%consumo
consumption
100
10
20
30
40
50
60
70
80
90
Lineal T528W
Lineal LED18W
F IP40 IK05
60
60
120
180
240
300
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1mm x 1mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 1598.20 lm
Massimo 259.79 cd/klm
Posizione C=270.00 G=1.00
Rendimento: 100.00%
Data: 01-01-1998
Asimmetrico
NEW
314 Plexiform
LINEAL ECO
FLUORESCENTE T5 A LUCE DIRETTA - DIRECT LIGHT T5 FLUORESCENT
CodiceCode
PotenzaPower
CCT Dimensioni mmDimensions mm
PesoWeight
LL120 1x8W 3000K 310x22x42 0,2 kgLL121 1x13W 3000K 540x22x42 0,4 kgLL122 1x21W 3000K 870x22x42 0,5 kgLL123 1x28W 3000K 1170x22x42 0,6 kgLL124 1x35W 3000K 1470x22x42 0,7 kg
LL125 1x8W 4000K 310x22x42 0,2 kgLL126 1x13W 4000K 540x22x42 0,4 kgLL127 1x21W 4000K 870x22x42 0,5 kgLL128 1x28W 4000K 1170x22x42 0,6 kgLL129 1x35W 4000K 1470x22x42 0,7 kg
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1180mm x 43mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 2900.00 lm
Massimo 126.61 cd/klm
Posizione C=0.00 G=45.00
Rendimento: 78.79%
Data: 03-07-2003
Doppia Simmetria
42
22
Compreso di kit attacco a soffitto e parete e cavo di alimentazione.
Ceiling and wall mounting kit and power supply included.
F IP40 IK05
Plexiform 315
LINEALAccessori Accessories
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
Giunto di connessione flessibile 150mm elettrificato biancoPossibilità di collegare in linea massimo 12 apparecchi.
White flexible 150mm electrified connection cable Maximum 12 fittings joined up in a line.
LL801 Ø7x150
Possibilità di collegare in linea massimo:- 12 apparecchi per la versione a LED- 5 apparecchi per la versione Fluorescente
Maximum joined up in a line:- 12 fittings for LED version- 5 fittings for Fluorescent version
Interruttore on/offon/off switch
Ø7
316 Plexiform
Apparecchio con illuminazione fluorescente monolampada e bilampada per interni ad illuminazione diretta.Installazione a soffitto.Corpo in lamiera d’acciaio preverniciato, colore bianco.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico e ferromagnetico.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e successivi aggiornamenti.L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.
Fluorescent single lamp and twin lamps fitting for indoor use.Direct light.Ceiling mounted.Pre-powder coat sheet steel body, white coloured.Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic and magnetic ballast.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and following amendments. Product complies RoHS standards.
On request:Wiring with switch dim or DALI dimmable ballast.
POKERSoffittoCeiling
Plexiform 317
POKER
POKER TP MONOLAMPADASINGLE LAMP POKER TP
POKER MONOLAMPADASINGLE LAMP POKER
POKER TP BILAMPADATWIN LAMPS POKER TP
POKER BILAMPADATWIN LAMPS POKER
318 Plexiform
POKER MONOLAMPADA
FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOPK101 1x24W 577x50x86 0,7 kgPK102 1x39W 877x50x86 0,9 kgPK103 1x49W 1477x50x86 1,2 kgPK104 1x54W 1177x50x86 1,1 kgPK105 1x80W 1477x50x86 1,2 kg
HEPK111 1x14W 577x50x86 0,7 kgPK112 1x21W 877x50x86 0,9 kgPK113 1x28W 1177x50x86 1,1 kgPK114 1x35W 1477x50x86 1,2 kg
86
50
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1180mm x 43mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 147.20 cd/klm
Posizione C=0.00 G=45.00
Rendimento: 92.81%
Data: 03-07-2003
Doppia Simmetria
IP20 IK05
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 319
MONOLAMPADA POKER
FLUORESCENTE T8 CE A LUCE DIRETTA - CE DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PK141 1x18W 618x50x86 0,8 kgPK142 1x30W 923x50x86 1,0 kgPK143 1x36W 1228x50x86 1,2 kgPK144 1x58W 1528x50x86 1,4 kg
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1228mm x 50mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3350.00 lm
Massimo 144.00 cd/klm
Posizione C=0.00 G=45.00
Rendimento: 93.45%
Data: 02-07-2003
Doppia Simmetria
Alimentatore elettronico.
Electronic ballast.
IP20 IK05
Alimentatore ferromagnetico, starter e condensatore.
Magnetic ballast, starter and capacitor.
FLUORESCENTE T8 CNR A LUCE DIRETTA – CNR DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PK131 1x18W 618x50x86 1,1 kgPK132 1x30W 923x50x86 1,3 kgPK133 1x36W 1228x50x86 1,5 kgPK134 1x58W 1528x50x86 2,1 kg
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1228mm x 50mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3350.00 lm
Massimo 144.00 cd/klm
Posizione C=0.00 G=45.00
Rendimento: 93.45%
Data: 02-07-2003
Doppia Simmetria IP20 IK05
FLUORESCENTE T8 CN A LUCE DIRETTA – CN DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PK121 1x18W 618x50x86 1,0 kgPK122 1x30W 923x50x86 1,2 kgPK123 1x36W 1228x50x86 1,4 kgPK124 1x58W 1528x50x86 2,0 kg
Alimentatore ferromagnetico e starter.
Magnetic ballast and starter.30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1228mm x 50mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3350.00 lm
Massimo 144.00 cd/klm
Posizione C=0.00 G=45.00
Rendimento: 93.45%
Data: 02-07-2003
Doppia Simmetria
IP20 IK05
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
320 Plexiform
POKER BILAMPADA
FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOPK151 2x24W 577x128x74 0,8 kgPK152 2x39W 877x128x74 1,5 kgPK153 2x49W 1477x128x74 2,7 kgPK154 2x54W 1177x128x74 1,9 kgPK155 2x80W 1477x128x74 2,7 kg
HEPK161 2x14W 577x128x74 0,8 kgPK162 2x21W 877x128x74 1,5 kgPK163 2x28W 1177x128x74 1,9 kgPK164 2x35W 1477x128x74 2,7 kg
Gli apparecchi sono cablati con un unico reattore.
Fittings are wired with one single ballast.
74
128
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1228mm x 120mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 124.75 cd/klm
Posizione C=0.00 G=10.00
Rendimento: 82.39%
Data: 03-07-2003
Doppia Simmetria IP20 IK05
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 321
BILAMPADA POKERFLUORESCENTE T8 CN A LUCE DIRETTA – CN DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PK171 2x18W 618x128x74 1,1 kgPK172 2x30W 923x128x74 1,6 kgPK173 2x36W 1228x128x74 2,1 kgPK174 2x58W 1528x128x74 3,2 kg
Alimentatore ferromagnetico e starter. Gli apparecchi 2x18W sono cablati con un unico reattore.
Magnetic ballast and starter. 2x18W fittings are wired with one single ballast
FLUORESCENTE T8 CNR A LUCE DIRETTA – CNR DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PK181 2x18W 618x128x74 1,2 kgPK182 2x30W 923x128x74 1,7 kgPK183 2x36W 1228x128x74 2,2 kgPK184 2x58W 1528x128x74 3,3 kg
Alimentatore ferromagnetico, starter e condensatore. Gli apparecchi 2x18W sono cablati con un unico reattore.
Magnetic ballast, starter and capacitor. 2x18W fittings are wired with one single ballast.
FLUORESCENTE T8 CE A LUCE DIRETTA - CE DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PK191 2x18W 618x128x74 0,9 kgPK192 2x30W 923x128x74 1,4 kgPK193 2x36W 1228x128x74 1,9 kgPK194 2x58W 1528x128x74 2,9 kg
Alimentatore elettronico. Gli apparecchi sono cablati con un unico reattore.
Electronic ballast. Fittings are wired with one single ballast.
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1228mm x 128mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 132.28 cd/klm
Posizione C=0.00 G=10.00
Rendimento: 95.39%
Data: 02-07-2003
Doppia Simmetria
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1228mm x 128mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 132.28 cd/klm
Posizione C=0.00 G=10.00
Rendimento: 95.39%
Data: 02-07-2003
Doppia Simmetria
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1228mm x 128mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 132.28 cd/klm
Posizione C=0.00 G=10.00
Rendimento: 95.39%
Data: 02-07-2003
Doppia Simmetria
IP20 IK05
IP20 IK05
IP20 IK05
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
322 Plexiform
POKER TP MONOLAMPADA
FLUORESCENTE T8 TP-CN A LUCE DIRETTA - TP-CN DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PK201 1x18W 618x50x88 1,2 kgPK202 1x30W 923x50x88 1,5 kgPK203 1x36W 1228x50x88 1,7 kgPK204 1x58W 1528x50x88 2,3 kg
Alimentatore ferromagnetico e starter, tubo in policarbonato rigato internamente (IP40).
Magnetic ballast and starter, polycarbonate tube (IP40), splined on the inside
88
50
40
40
80
80
120
120
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1228mm x 50mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3350.00 lm
Massimo 124.55 cd/klm
Posizione C=0.00 G=45.00
Rendimento: 80.98%
Data: 04-07-2003
Doppia Simmetria
IP40 IK05
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 323
TP MONOLAMPADA POKER
Alimentatore ferromagnetico, starter e condensatore, tubo in policarbonato rigato internamente (IP40).
Magnetic ballast, starter and capacitor, polycarbonate tube (IP40) splined on the inside.
FLUORESCENTE T8 TP-CNR A LUCE DIRETTA / TP-CNR DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PK211 1x18W 618x50x88 1,3 kgPK212 1x30W 923x50x88 1,5 kgPK213 1x36W 1228x50x88 1,8 kgPK214 1x58W 1528x50x88 2,4 kg
Compreso di tubo in policarbonato rigato internamente (IP40).
Supplied with a polycarbonate tube (IP40) splined on the inside
FLUORESCENTE T8 TP-CE A LUCE DIRETTA / TP-CE DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PK221 1x18W 618x50x88 0,9 kgPK222 1x30W 923x50x88 1,3 kgPK223 1x36W 1228x50x88 1,5 kgPK224 1x58W 1528x50x88 1,7 kg
40
40
80
80
120
120
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1228mm x 50mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 3350.00 lm
Massimo 124.55 cd/klm
Posizione C=0.00 G=45.00
Rendimento: 80.98%
Data: 04-07-2003
Doppia Simmetria
40
40
80
80
120
120
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1228mm x 50mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3350.00 lm
Massimo 124.55 cd/klm
Posizione C=0.00 G=45.00
Rendimento: 80.98%
Data: 04-07-2003
Doppia Simmetria
IP40 IK05
IP40 IK05
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
324 Plexiform
POKER TP BILAMPADA
FLUORESCENTE T8 TP-CN A LUCE DIRETTA – TP-CN DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PK231 2x18W 618x120x88 1,5 kgPK232 2x30W 923x120x88 2,4 kgPK233 2x36W 1228x120x88 2,8 kgPK234 2x58W 1528x120x88 4,0 kg
Alimentatore ferromagnetico e starter, tubo in policarbonato rigato internamente (IP40). Gli apparecchi 2x18W sono cablati con un unico reattore
Magnetic ballast and starter, polycarbonate tube (IP40), splined on the inside. 2x18W fittings are wired with one single ballast.
88
120
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1228mm x 120mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 124.75 cd/klm
Posizione C=0.00 G=10.00
Rendimento: 82.39%
Data: 03-07-2003
Doppia Simmetria
IP40 IK05
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
Plexiform 325
TP BILAMPADA POKER
Compreso di tubo in policarbonato rigato internamente (IP40). Gli apparecchi sono cablati con un unico reattore.
Supplied with a polycarbonate tube (IP40) splined on the inside. fittings are wired with one single ballast.
FLUORESCENTE T8 TP-CNR A LUCE DIRETTA – TP-CNR DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PK241 2x18W 618x120x88 1,6 kgPK242 2x30W 923x120x88 2,5 kgPK243 2x36W 1228x120x88 2,9 kgPK244 2x58W 1528x120x88 4,1 kg
Alimentatore ferromagnetico, starter e condensatore, tubo in policarbonato rigato internamente (IP40). Gli apparecchi 2x18W sono cablati con un unico reattore.
Magnetic ballast, starter and capacitor, polycarbonate tube (IP40), splined on the inside. 2x18W fittings are wired with one single ballast.
FLUORESCENTE T8 TP-CE A LUCE DIRETTA – TP-CE DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
PK251 2x18W 618x120x88 1,3 kgPK252 2x30W 923x120x88 2,2 kgPK253 2x36W 1228x120x88 2,6 kgPK254 2x58W 1528x120x88 3,3 kg
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1228mm x 120mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 6700.00 lm
Massimo 124.75 cd/klm
Posizione C=0.00 G=10.00
Rendimento: 82.39%
Data: 03-07-2003
Doppia Simmetria
IP40 IK05
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1228mm x 120mm
Semipiani C
180.0 0 .0
270.0 90.0
Flusso 6700.00 lm
Massimo 124.75 cd/klm
Posizione C=0.00 G=10.00
Rendimento: 82.39%
Data: 03-07-2003
Doppia Simmetria
IP40 IK05
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
326 Plexiform
POKER Accessori Accessories
Kit ghiere di protezione bilampada In policarbonato autoestinguente, fissaggio ad innesto.
Twin-lamp protection ring nuts kit In self-extinguishing polycarbonate, clip on fixture.
Parabola riflettente bilampada T8 In lamiera di acciaio preverniciata, colore bianco, fissaggio con viti e dadi. Permette di concentrare il flusso luminoso.
Twin-lamp T8 reflector In pre-powder coat steel, white coloured, fixed with bolts and nuts. It makes possible to concentrate the light flow.
Kit ghiere di protezione monolampada In policarbonato autoestinguente, fissaggio ad innesto.
Single-lamp protection ring nuts kit In self-extinguishing polycarbonate, clip on fixture.
Parabola riflettente monolampada T5In lamiera di acciaio preverniciata, colore bianco, fissaggio con viti e dadi. Permette di concentrare il flusso luminoso.
Single-lamp T5 reflector In pre-powder coat steel, white coloured, fixed with bolts and nuts. It makes possible to concentrate the light flow.
Parabola riflettente monolampada T8In lamiera di acciaio preverniciata, colore bianco, fissaggio con viti e dadi. Permette di concentrare il flusso luminoso.
Single-lamp T8 reflector In pre-powder coat steel, white coloured, fixed with bolts and nuts. It makes possible to concentrate the light flow.
Parabola riflettente bilampada T5In lamiera di acciaio preverniciata, colore bianco, fissaggio con viti e dadi. Permette di concentrare il flusso luminoso.
Twin-lamp T5 reflectorIn pre-powder coat steel, white coloured, fixed with bolts and nuts. It makes possible to concentrate the light flow.
Descrizione AccessoriDescription Accessories
Codice Code
Dimensioni mmDimensions mm
PK833 Ø38x22
PK834 Ø38x22
PK817 575x132x57 - 1x14/24WPK818 875x132x57 - 1x21/39WPK819 1175x132x57 - 1x28/54WPK820 1475x132x57 - 1x28/54W
PK821 616x132x57 - 1x18WPK822 921x132x57 - 1x30WPK823 1226x132x57 - 1x36WPK824 1526x132x57 - 1x58W
PK825 575x222x57 - 2x14/24WPK826 875x222x57 - 2x21/39WPK827 1175x222x57 - 2x28/54WPK828 1475x222x57 - 2x35/49/80W
PK829 616x222x57 - 2x18WPK830 921x222x57 - 2x30WPK831 1226x222x57 - 2x36WPK832 1526x222x57 - 2x58W
132
575-875-1175-147557
222
575-875-1175-1475
57
222
616-921-1226-1526
57
132
616-921-1226-1526
57
22
Ø38
22
Ø38
Plexiform 327
328 Plexiform
Apparecchio con illuminazione a LED o fluorescente per interni.Ad emissione diretta.Installazione a soffitto.Corpo in alluminio preverniciato, colore bianco.Verniciatura a fuoco con polveri epossidiche, resistente agli ambienti umidi e stabilizzata ai raggi UV.Alimentazione con reattore elettronico.I LED utilizzati, serie 5630, sono alimentati in corrente costante con una resa di 110 lm/W Ra≥ 80, apertura fascio 120° nelle versioni da CCT 3000K e 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, e alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN 62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti. L’apparecchio è conforme alla Direttiva RoHS.
A richiesta:Reattore elettronico dimmerabile o DALI.
LED or fluorescent fitting for indoor use.Direct light.Ceiling mounted.Pre-powder coat aluminium body, white coloured.Baked with epoxy powder coatings, resistant to damp environments and UV-ray stabilized.Supplied with electronic ballast.Our LED, series 5630, are powered by constant current drivers, efficiency 110 lm/W Ra≥ 80, beam angle 120° in CCT 3000K and 4000K versions.Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471 photobiological safety standards and following amendments. Product complies RoHS standards.
On request:Wiring with switch dim or DALI dimmable ballast.
CLIKSoffittoCeiling
Plexiform 329
CLIK
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
CK101 12W 1300 lm 3000K 605x43x74 0,6 kgCK102 12W 1300 lm 4000K 605x43x74 0,6 kgCK103 24W 2600 lm 3000K 1145x43x74 0,8 kgCK104 24W 2600 lm 4000K 1145x43x74 0,8 kg
LED A LUCE DIRETTA CON SCHERMO DIFFUSORE – DIRECT LIGHT LED WITH DIFFUSER
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Click CS T5 54W 132
Click CS LED 24W 178
100100%consumo
consumption
EnergySaving
56%
44%consumo
consumption
10
20
30
40
50
60
70
80
90
Click CS T554W
Click CS LED24W
60
60
120
180
240
300
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
180
90
270
1mm x 1mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 1598.20 lm
Massimo 259.79 cd/klm
Posizione C=270.00 G=1.00
Rendimento: 100.00%
Data: 01-01-1998
Asimmetrico
74
43
IP40 IK05
Versione LEDLED Version
NEW
Compreso di schermo diffusore.
Diffuser included.
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Per la fattibilità contattare l’ufficio tecnico: [email protected]
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.For the feasibility ask technical office: [email protected]
EMERGENCY KITEM
330 Plexiform
CLIK
FLUORESCENTE T8 A LUCE DIRETTA – DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
CK131 1x8W 319x43x74 0,4 kgCK132 1x13W 547x43x74 0,5 kgCK133 1x15W 471x43x74 0,4 kgCK134 1x18W 623x43x74 0,5 kgCK135 1x30W 928x43x74 0,6 kgCK136 1x36W 1233x43x74 0,6 kgCK137 1x58W 1533x43x74 0,7 kg
FLUORESCENTE T5 A LUCE DIRETTA – DIRECT LIGHT T5 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOCK111 1x24W 580x43x74 0,5 kgCK112 1x39W 880x43x74 0,5 kgCK113 1x49W 1480x43x74 0,7 kgCK114 1x54W 1180x43x74 0,6 kgCK115 1x80W 1480x43x74 0,7 kg
HECK116 1x14W 580x43x74 0,5 kgCK117 1x21W 880x43x74 0,5 kgCK118 1x28W 1180x43x74 0,6 kgCK119 1x35W 1480x43x74 0,7 kg
74
43
IP20 IK05
IP20 IK05
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1180mm x 43mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 147.20 cd/klm
Posizione C=0.00 G=45.00
Rendimento: 92.81%
Data: 03-07-2003
Doppia Simmetria
40
40
80
80
120
120
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1233mm x 43mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3350.00 lm
Massimo 136.67 cd/klm
Posizione C=0.00 G=55.00
Rendimento: 89.53%
Data: 03-07-2003
Doppia Simmetria
Plexiform 331
CLIK
FLUORESCENTE T8 A LUCE DIRETTA CON SCHERMO DIFFUSORE – DIRECT LIGHT T8 FLUORESCENT WITH DIFFUSER
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
CK141 1x8W 319x43x74 0,4 kgCK142 1x13W 547x43x74 0,5 kgCK143 1x15W 471x43x74 0,5 kgCK144 1x18W 623x43x74 0,6 kgCK145 1x30W 928x43x74 0,7 kgCK146 1x36W 1233x43x74 0,8 kgCK147 1x58W 1533x43x74 0,9 kg
74
43
FLUORESCENTE T5 A LUCE DIRETTA CON SCHERMO DIFFUSORE – DIRECT LIGHT T5 FLUORESCENT WITH DIFFUSER
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
HOCK121 1x24W 580x43x74 0,5 kgCK122 1x39W 880x43x74 0,6 kgCK123 1x49W 1480x43x74 0,9 kgCK124 1x54W 1180x43x74 0,8 kgCK125 1x80W 1480x43x74 0,9 kg
HECK126 1x14W 580x43x74 0,5 kgCK127 1x21W 880x43x74 0,6 kgCK128 1x28W 1180x43x74 0,8 kgCK129 1x354W 1480x43x74 0,9 kg
30
30
60
60
90
90
120
120
150
150
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1180mm x 43mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 5000.00 lm
Massimo 126.61 cd/klm
Posizione C=0.00 G=45.00
Rendimento: 78.79%
Data: 03-07-2003
Doppia Simmetria
40
40
80
80
120
120
0˚ 15˚15˚ 30˚30˚ 45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚120˚
135˚135˚ 150˚165˚180˚
cd/klm
Angoli Gamma
0180
90
270
1233mm x 43mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 3350.00 lm
Massimo 121.30 cd/klm
Posizione C=0.00 G=45.00
Rendimento: 76.31%
Data: 03-07-2003
Doppia Simmetria
IP40 IK05
IP40 IK05
Compreso di schermo diffusore.
Diffuser included.
Compreso di schermo diffusore.
Diffuser included.
332 Plexiform
Apparecchio con illuminazione a LED o fluorescente, per interni ed esterni, adatto per ambienti umidi, polverosi e/o corrosivi, ad emissione diretta Installazione a soffitto.Corpo in policarbonato autoestinguente stampato ad iniezione, colore grigio, stabilizzato ai raggi UV. Schermo in policarbonato autoestinguente, stampato ad iniezione, con finitura frozen (versione a LED) e trasparente (versione fluorescente)Alimentazione con reattore elettronico. I LED utilizzati sono alimentati in corrente costante con una resa di 108 lm/W Ra≥ 80, apertura fascio 120°, CCT 4000K.Prodotto conforme alle vigenti norme EN 60598 in materia di sicurezza elettrica, alle norme EN 55015, EN 61000, EN 61547 in materia di compatibilità elettromagnetica e alle norme EN 62031, EN62471 in materia di sicurezza ottica (fotobiologico) e successivi aggiornamenti.Protetto con il grado IP65 e installabile su superfici normalmente infiammabili.L’apparecchio è conforme alla Direttiva RoHS
LED fitting for indoor and outdoor use, suitable for damp, dusty and/or corrosive environments, direct light.Ceiling mounted.In self-extinguishing polycarbonate, injection cast, grey coloured, UV-ray stabilized.Diffuser in self-extinguishing polycarbonate, injection moulded, frozen finishing (LED fitting) and transparent finishing (fluorescent fitting). Supplied with electronic ballast.Our LED are powered by constant current drivers, efficiency 108 lm/W, Ra≥80, beam angle 120°, CCT 4000k.Product complies with current EN 60598 electric safety standards, EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards and EN 62031, EN 62471 photobiological safety standards and following amendments.Protected with IP65 degree and installable on normally inflammable surfaces.Product complies to RoHS standards.
GHIBLISoffittoCeiling
IP65
Plexiform 333
GHIBLI
CodiceCode
PotenzaPower
FlussoFlux
CCT Dimensioni mmDimensions mm
PesoWeight
GL101 1x12W 1296 lm 4000K 656x85x72 0,7 kgGL102 1x24W 2592 lm 4000K 1266x85x72 1,3 kgGL103 1x30W 3240 lm 4000K 1566x85x72 1,6 kg
GL104 2x12W 2592 lm 4000K 656x118x72 1,0 kgGL105 2x24W 5184 lm 4000K 1266x118x72 1,7 kgGL106 2x30W 6480 lm 4000K 1566x118x72 2,2 kg
LED A LUCE DIRETTA - DIRECT LIGHT LED
TABELLA DI COMPARAZIONE - COMPARISON TABLE
ProdottoProduct
Potenza totaleTotal power
LuxLux
Ghibli T5 108W 327
Ghibli LED 48W 350
100100%consumo
consumption
EnergySaving
56%
44%consumo
consumption
10
20
30
40
50
60
70
80
90
Ghibli T5108W
Ghibli LED48W
70
70
140
210
280
350
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0180
90
270
1265mm x 85mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 2212.00 lm
Massimo 324.81 cd/klm
Posizione C=315.00 G=10.00
Rendimento: 100.00%
Data: 01-01-1998
Asimmetrico F IP65 IK06
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Disponibile per apparecchi di lunghezza non inferiore a 1200mm.Gli apparecchi 2x hanno una sola striscia LED collegata al gruppo di emergenza.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.Availabale only on fittings longer than 1200mm.The 2x fittings have only one strip LED connected to the emergency unit.
EMERGENCY KITEM
7272
11885
Completi di ganci in acciaio inox e kit attacco a soffitto.
Supplied with stainless steel clips and ceiling connection kit.
NEW
Versione LEDLED Version
334 Plexiform
GHIBLI
FLUORESCENTE T5 A LUCE DIRETTA - DIRECT LIGHT T5 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
GL111 1x28W 1210x65x75 1,2 kgGL112 1x35W 1510x65x75 1,6 kg
GL113 2x14W 610x104x75 0,9 kgGL114 2x28W 1210x104x75 1,6 kgGL115 2x35W 1510x104x75 2,2 kg
7575
10465
Completi di ganci in plastica e kit attacco a soffitto.
Supplied with plastic clips and ceiling connection kit.
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
90
270
180
1280mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 8900.00 lm
Massimo 170.97 cd/klm
Posizione C=0.00 G=10.00
Rendimento: 71.63%
Data: 14-06-2005
Simmetrico 0-180
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Disponibile per apparecchi di lunghezza non inferiore a 1200mm.Gli apparecchi bilampada hanno una sola lampada collegata al gruppo di emergenza.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.Availabale only on fittings longer than 1200mm.The two-lamp fittings have only one lamp connected to the emergency unit.
EMERGENCY KITEM
F IP65 IK06
Kit ganci in acciaio inox per T5
T5 stainless steel clips kit
GL801 40x20x10 - 1/2x14WGL802 40x20x10 - 1/2x28WGL803 40x20x10 - 1/2x35W
40
10
Codice Code
Dimensioni mmDimensions mm
ACCESSORI - ACCESSORIESDescrizione AccessoriDescription Accessories
Plexiform 335
Per apparecchi con kit di emergenza, aggiungere EM alla fine del codice.Disponibile per apparecchi di lunghezza non inferiore a 1200mm.Gli apparecchi bilampada hanno una sola lampada collegata al gruppo di emergenza.
KIT EMERGENZAEMFor fittings with emergency kit, please add EM at the end of code.Availabale only on fittings longer than 1200mm.The two-lamp fittings have only one lamp connected to the emergency unit.
EMERGENCY KITEM
GHIBLI
FLUORESCENTE T8 A LUCE DIRETTA - DIRECT LIGHT T8 FLUORESCENT
CodiceCode
PotenzaPower
Dimensioni mmDimensions mm
PesoWeight
GL121 1x18W 650x72x86 0,9 kgGL122 1x36W 1265x72x86 1,4 kgGL123 1x58W 1565x72x86 2,0 kg
GL124 2x18W 650x115x86 1,2 kgGL125 2x36W 1265x115x86 1,7 kgGL126 2x58W 1565x115x86 2,4 kg
8686
11572
Completi di ganci in plastica e kit attacco a soffitto.
Supplied with plastic clips and ceiling connection kit.
40
40
80
120
160
200
0˚ 15˚15˚ 30˚30˚
45˚45˚
60˚60˚
75˚75˚
90˚90˚
105˚105˚
120˚180˚
cd/klm
Angoli Gamma
0
90
270
180
1280mm x 140mm
Semipiani C
180.0 0.0
270.0 90.0
Flusso 6700.00 lm
Massimo 170.97 cd/klm
Posizione C=0.00 G=10.00
Rendimento: 71.63%
Data: 14-06-2005
Simmetrico 0-180 F IP65 IK06
Kit ganci in acciaio inox per T8
T8 stainless steel clips kit
GL804 50x25x12 - 1/2x18WGL805 50x25x12 - 1/2x36WGL806 50x25x12 - 1/2x58W
50
12
Codice Code
Dimensioni mmDimensions mm
ACCESSORI - ACCESSORIESDescrizione AccessoriDescription Accessories
336 Plexiform
ROSONI
SV801XX Ø40
SV802XX Ø40 - Ø65
SV803XX Ø40 - Ø65
Kit rosoni per sospensione semplice (senza cavo di alimentazione)Simple suspension ceiling rose kit (without supply cable)
Kit rosoni con cavo di alimentazione 3x1,5 mm2 per sospensione elettrificataElectrified suspension ceiling rose kit with 3x1,5 mm2 supply cable
Kit rosoni con cavo di alimentazione 5x1,5 mm2 per sospensione elettrificataElectrified suspension ceiling rose kit with 5x1,5 mm2 supply cable
DescrizioneDescription
Coppia di rosoni in policarbonato autoestinguente verniciato con regolatore millimetrico.Carico massimo 7 Kg per ciascuno. Permette la sospensione dei corpi illuminanti regolabile dal soffitto.
Pair of powder coat self-extinguishing polycarbonate ceiling roses and millimetric regulator.Maximum load 7 Kg each one. Makes it possible the suspension of the fitting adjustable from the ceiling.
KIT ROSONE TONDO - ROUND CEILING ROSE KIT
SV807XX 150x70x44
SV808XX 150x70x44
SV809XX 150x70x44
Kit rosoni per sospensione semplice (senza cavo di alimentazione)Simple suspension ceiling rose kit (without supply cable)
Kit rosoni con cavo di alimentazione 3x1,5 mm2 per sospensione elettrificataElectrified suspension ceiling rose kit with 3x1,5 mm2 supply cable
Kit rosoni con cavo di alimentazione 5x1,5 mm2 per sospensione elettrificataElectrified suspension ceiling rose kit with 5x1,5 mm2 supply cable
DescrizioneDescription
Coppia di rosoni in policarbonato autoestinguente verniciato con regolatore millimetrico.Carico massimo 7 Kg per ciascuno. Permette la sospensione dei corpi illuminanti regolabile dal soffitto.
Pair of powder coat self-extinguishing polycarbonate ceiling roses and millimetric regulator.Maximum load 7 Kg each one. Makes it possible the suspension of the fitting adjustable from the ceiling.
KIT ROSONE OVALE - OVAL CEILING ROSE KIT
Codice Code
Dimensioni mmDimensions mm
SV811XX 40x40x30
SV812XX 40x40x30
SV813XX 40x40x30
Kit rosoni per sospensione semplice (senza cavo di alimentazione)Simple suspension ceiling rose kit (without supply cable)
Kit rosoni con cavo di alimentazione 3x1,5 mm2 per sospensione elettrificataElectrified suspension ceiling rose kit with 3x1,5 mm2 supply cable
Kit rosoni con cavo di alimentazione 5x1,5 mm2 per sospensione elettrificataElectrified suspension ceiling rose kit with 5x1,5 mm2 supply cable
DescrizioneDescription
Coppia di rosoni in lamiera verniciata con regolatore millimetrico.Carico massimo 7 Kg per ciascuno. Permette la sospensione dei corpi illuminanti regolabile dal soffitto.
Pair of powder coat sheet steel ceiling roses and millimetric regulator.Maximum load 7 Kg each one. Makes it possible the suspension of the fitting adjustable from the ceiling.
KIT ROSONE QUADRATO - SQUARE CEILING ROSE KIT
Codice Code
Dimensioni mmDimensions mm
Codice Code
Dimensioni mmDimensions mm
44
90
50
150
30
40 40
70
Ø65 Ø40
Plexiform 337
CEILING ROSES
SV815 20x12x3
DescrizioneDescription
Codice Code
Dimensioni mmDimensions mm
Rosone quadratoRosone quadrato in lamiera verniciata con morsetto e foro per cavo di alimentazione.
Square ceilingSquare powder coat sheet steel ceiling rose with clip and hole for supply cable.
Fune acciaio zincataMatassa di fune acciaio zincata, lunghezza 100 mt.
Galvanized steel wire rope.Galvanized wire rope, length 100 mt.
SV814 100 mt x Ø1,2 mm
SV810XX 40x40x30
Staffa scorrevole In lamiera zincata. In combinazione con la matassa di fune acciaio, permette la sospensione dei moduli a una distanza superiore a 1500 mm dal soffitto.
Suspension stirrupIn galvanized sheet steel. With galvanized wire rope, it allows to suspend the modules more than 1500 mm from the ceiling.
SV804XX 180x50x55
SV805XX 180x50x55
SV806XX 180x50x55
Kit rosoni per sospensione semplice (senza cavo di alimentazione)Simple suspension ceiling rose kit (without supply cable)
Kit rosoni con cavo di alimentazione 3x1,5 mm2 per sospensione elettrificataElectrified suspension ceiling rose kit with 3x1,5 mm2 supply cable
Kit rosoni con cavo di alimentazione 5x1,5 mm2 per sospensione elettrificataElectrified suspension ceiling rose kit with 5x1,5 mm2 supply cable
DescrizioneDescription
Coppia di rosoni in policarbonato autoestinguente verniciato con regolatore millimetrico.Carico massimo 7 Kg per ciascuno. Permette la sospensione dei corpi illuminanti regolabile dal soffitto.
Pair of powder coat self-extinguishing polycarbonate ceiling roses and millimetric regulator.Maximum load 7 Kg each one. Makes it possible the suspension of the fitting adjustable from the ceiling.
KIT ROSONE BARCHETTA - NAVY CEILING ROSE KIT
ACCESSORI VARI - VARIOUS ACCESSORIES
Codice Code
Dimensioni mmDimensions mm
55
30
40 40
3
12 20
180
50
100 mt
338 Plexiform
I sensori diurni e di movimento aumentano il risparmio energetico ed il confort. I MultiSensor rilevano sia i livelli luminosi che il movimento. Inoltre i MultiSensor hanno un design compatto in quanto progettati specificatamente per lavorare con i Light Controller. Non è richiesta alcuna alimentazione esterna in quanto i sensori sono alimentati tramite il bus DALI.
Caratteristiche tecniche:• Interfaccia di configurazione tramite il Light Controller• Temperatura ambiente ta: 0 fino a 50°C• Morsetti molla ferma filo con apertura a leva: 0,5–1,5 mm2
• Consumo di corrente DALI: 4 mA
Funzioni:Rilevamento di movimento e monitoraggio della luce. Con LED integrato (rosso): la luce lampeggia durante la configurazione quando il sensore viene selezionato.
Istruzioni di installazione:• Sezione per tutti i morsetti: 0,5–1,5 mm2 sia per i cavi rigidi che per i cavi flessibili• Preparazione dei cavi del sensore• Siccome un bus DALI standard non è SELV conforme, i cavi devono essere approvati per la tensione di rete• L’alimentazione e la linea DALI possono essere posati in un unico cavo purché questo non superi una lunghezza massima di 100 mt
Informazioni aggiuntive• I MultiSensor possono funzionare solo in combinazione con il Light Controller appropriato• Fare riferimento all’ufficio tecnico Plexiform per le istruzioni su come configurare i sensori ([email protected])• Per garantire un funzionamento sicuro dei sensori, non deve essere superata la temperatura ambiente ammessa• Il sensore deve essere posizionato in modo da garantire che l’area di ricezione non sia ostruita da oggetti, mobili, ecc.• Vedere Fig. 1 per il range del sensore. L’altezza specificata nella Fig. 1 è un valore di riferimento. Per altre altezze ed in particolare per altezze
maggiori, può essere necessario testare la sensibilità dei sensori in loco, in quanto la sensibilità del sensore di movimento diminuisce in proporzione alla sua altezza di montaggio
Daylight and motion sensors increase both energy savings and convenience. MultiSensors detect both light levels and motion. In addition, MultiSensors feature a space-saving design and were specifically developed to work with Light Controllers. No external power supply is required, as the sensors are supplied via the DALI bus.
Technical notes:• Configuration interface via the Light Controller• Ambient temperature ta: 0 to 50 °C• Push-in terminals with lever opener: 0,5–1,5 mm2
• DALI current consumption: 4 mA
Functions:Motion detection and monitoring of lighting levels. With built-in LED (red): the light flashes during configuration when the sensor is selected.
Installation instructions:• Conductor cross-section of all terminals: 0,5–1,5 mm2 for both rigid and flexible conductors• Preparation of the sensor cables• As a standard DALI bus is not SELV-compliant, cables must be rated for mains voltage• The power supply and the DALI line can be laid in a single cable provided the cable does not exceed a maximum length of 100 mt
Additional information• MultiSensors can only be operated in combination with the right Light Controller• Please refer to the Plexiform technical office for exact instructions on how to configure the sensors ([email protected])• To ensure safe operation of the sensors, the maximum permitted ambient temperature must not be exceeded• The sensor must be positioned to ensure its reception range is not obstructed by objects, furniture, etc.• See Fig. 1 for the sensor range. The height specified in Fig. 1 is a reference value. For other and specifically greater heights, it may be necessary to
test the sensitivity of the sensors on site as the sensitivity of the motion sensor decreases the higher up it is mounted
SISTEMI DI CONTROLLO DELLA LUCE
Fig. 16 m
30° 30°
2,5
m
Plexiform 339
LIGHTING CONTROL SYSTEMS
SV816 Ø53x48,5h
SV818 Ø53x48,5h
SV817 Ø40x43,8h
DescrizioneDescription
DescrizioneDescription
DescrizioneDescription
Per il montaggio su superficiDimensioni: 53x48,5 mm - Peso: 30 g
Installazione SM-E (Surface Mounted)Preparare il cavo in modo appropriato e guidarlo lateralmente o da dietro attraverso il lato inferiore del sensore. Fissare il lato inferiore nella posizione desiderata usando le due viti in dotazione, poi collegare il cavo al sensore. Premere insieme, leggermente, con due dita, le molle del coperchio del sensore per consentire il bloccaggio in posizione lungo la barra di guida dentro il lato inferiore del sensore (vedere Fig. 2)
Surface mountingDimensioni: 53x48,5 mm - Peso: 30 g
Installation SM-E (Surface Mounted) Prepare the cable accordingly and thread it through the back plate of the sensor at the side or from behind. Attach the back plate in the selected position using the two screws provided, then connect the cable to the sensor. Use two fingers to lightly press the springs of the sensor cover together and allow to lock into place along the guide rails inside the sensor’s bottomface (see Fig. 2).
Per l’installazione in apparecchi di illuminazioneDimensioni: 45x31,9 mm - Peso: 30 g
Installazione IL-E (In Luminaire)Considerare la dimensione della dima del foro in cui viene inserito il sensore nella lamiera di spessore 0,5–1 mm. Far agganciare il sensore esattamente nel foro appositamente preparato nella lamiera. Agganciare l’anello antiriflesso del sensore sull’altro lato nell’alloggiamento previsto a questo scopo. (vedere Fig. 4)
Installation IL-E (In Luminaire) Heed the dimension of the drilling template when inserting the sensor in the metal plate, which is 0.5–1 mm thick. Allow the sensor to lock into place in the precisely pre-drilled hole in the metal plate. Allow the sensor cover ring to lock into place from the other side in the recesses provided (see Fig. 4).
Per il montaggio su soffitti con serracavoDimensioni: 40x43,8 mm - Peso: 30 g
Installazione FM-E (Flush Mounted)Preparare il cavo, eseguire la connessione al sensore ed applicare il serracavo se opportuno. Usare due dita per premere insieme, leggermente, le molle del sensore e consentire l’aggancio nel foro appositamente preparato (35 mm) nella posizione desiderata. (vedere Fig. 3)
Installation FM-E (Flush Mounted) Prepare the cable, connect to the sensor and attach cord grip if appropriate. Use two fingers to lightly press the sensor together and allow to lock into place in the pre-drilled hole (35 mm) in the selected position (see Fig. 3).
MULTISENSOR SM-E
MULTISENSOR IL-E
MULTISENSOR FM-E
Codice Code
Dimensioni mmDimensions mm
Codice Code
Dimensioni mmDimensions mm
Codice Code
Dimensioni mmDimensions mm
48,5
Ø 5
3
43,8
Ø 3
3
ca.5
8
Ø 4
0Ø
45
Ø 3
3
Fig. 2
Fig. 3
Fig. 4
click
click
click
340 Plexiform
SISTEMI DI CONTROLLO DELLA LUCE
SV883 83x30x19
DescrizioneDescriptionPer l’installazione in apparecchi di illuminazioneDimensioni: 83x30x19 mm - Peso: 30 gQuesti dispositivi di controllo sono adatti per il funzionamento in apparecchi di illuminazione.
Caratteristiche tecniche• Interfaccia di configurazione: tramite dip switch (sul dispositivo)• Temperatura ambiente ta: 5 fino a 50 °C• Temperatura massima dell’involucro tc: 60 °C• Durata di vita: 50.000 ore• Morsetti molla ferma filo con apertura a leva: 0,5–1,5 mm2
• Grado di protezione: IP20• Schermato contro i radiodisturbi• Per apparecchi di illuminazione in classe di protezione I e II• I MultiSensor sono collegati direttamente al bus DALI.• Numero dei dispositivi: max. 10 pz• Numero di MultiSensor: max. 4 pz
CollegamentiConnessione di rete: 220–240 V AC/DC, 0/50–60 Hz, max. assorbimento di energia 0,8 W1 bus DALI: corrente massima sul bus DALI = 20 mA. Un bus DALI standard non è SELV conforme, perciò il cavo DALI deve essere resistente alla tensione di rete. Il bus DALI dispone della protezione contro i cortocircuiti e il ripristino elettronico in presenza di sovraccarichi.1 ingresso tramite tasto configurabile
Funzioni• Rilevamento di movimento automatico e semi-automatico• Controllo costante della luce• Funzione push, (10 alimentatori elettronici sincroni)• Funzione ON/OFF• Indirizzamento (broadcast)
For luminaire installationDimensions: 83x30x19 mm - Weight: 30 gThese light control devices are suitable for operation in luminaires.
Technical notes• Configuration interface: dip switch (on the device)• Ambient temperature ta: 5 to 50 °C• Max. casing temperature tc: 60 °C• Lifetime: 50.000 hrs.• Push-in terminals with lever opener: 0,5–1,5 mm2
• Degree of protection: IP20• RFI-suppressed• For luminaires of protection class I and II• The MultiSensors are connected directly to the DALI bus.• No. of operating devices: max. 10 pcs.• No. of MultiSensors: max. 4 pcs.
ConnectionsMains connection: 220–240 V AC/DC, 0/50–60 Hz, max. power consumption 0,8 W1 DALI bus : max. current on DALI bus = 20 mA. As a standard DALI bus is not SELV-compliant, the DALI cable must be rated for mains voltage.The DALI bus features reversible electronic overload and short-circuit protection.1 configurable push button input
Functions• Automatic and semi-automatic motion detection• Constant light control• Push function (10 EBs synchronously)• ON/OFF function• Control option (broadcast)
LIGHT CONTROLLER XS
Codice Code
Dimensioni mmDimensions mm
83
75
30
19
15
Plexiform 341
LIGHTING CONTROL SYSTEMS
SV884 175x42x31,5
DescrizioneDescriptionPer il funzionamento indipendenteDimensioni: 175x42x31,5 mm - Peso: 150 gQuesti dispositivi di controllo della luce sono disponibili per il funzionamento indipendente.
Caratteristiche tecniche• Interfaccia di configurazione: tramite dip switch (sul dispositivo)• Temperatura ambiente ta: 0 fino a 50 °C• Temperatura massima dell’involucro tc: 65 °C• Morsetti a vite: 0,75–2,5 mm2
• Grado di protezione: IP20, classe di protezione II• Schermato contro i radiodisturbi• I MultiSensor sono collegati direttamente al bus DALI.• Numero dei dispositivi: max. 64 pz• Numero MultiSensor: max. 36 pz
CollegamentiConnessione di rete: 220–240 V AC/DC, 0/50–60 Hz, max. assorbimento di energia 6,5 W1 bus DALI: corrente massima sul bus DALI = 200 mA. Un bus DALI standard non è SELV conforme, perciò il cavo DALI deve essere adatto alla tensione di rete. Il bus DALI dispone della protezione contro i cortocircuiti e il ripristino elettronico in presenza di sovraccarichi.1 ingresso tramite tasto configurabile.I cavi devono essere resistenti alla tensione di rete; 220–240 V AC/DC, 0/50–60 Hz
Funzioni• Rilevamento di movimento automatico e semi-automatico• Controllo costante della luce• Funzione push, (64 alimentatori elettronici sincroni)• Funzione ON/OFF• Funzione scale (timer), software per l’analisi del sistema, protezione tramite password• Indirizzamento (broadcast)
For independent operationDimensions: 175x42x31,5 mm - Weight: 150 gThese light control devices are suitable for independent operation.
Technical notes• Configuration interface: dip switch (on the device)• Ambient temperature ta: 0 to 50 °C• Max. casing temperature tc: 65 °C• Screw terminals: 0,75–2,5 mm2
• Degree of protection: IP20, Protection class II• RFI-suppressed• The MultiSensors are connected directly to the DALI bus.• No. of operating devices: max. 64 pcs.• No. of MultiSensors: max. 36 pcs.
ConnectionsMains connection: 220–240 V AC/DC, 0/50–60 Hz, max. power consumption 6,5 W1 DALI bus : max. current on DALI bus = 200 mA. As a standard DALI bus is not SELV-compliant, the DALI cable must be rated for mains voltage. The DALI bus features reversible electronic overload and short-circuit protection.1 configurable push button input:cables must be rated for mains voltage; 220–240 V AC/DC, 0/50–60 Hz
Functions• Automatic and semi-automatic motion detection• Constant light control, push function (64 EBs synchronously),• ON/OFF function, stairwell function (timer),• Control option (broadcast)
LIGHT CONTROLLER S
Codice Code
Dimensioni mmDimensions mm
175
135 31,5
42
342 Plexiform
COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG.
INDICE PER CODICEAM101 100AM102 100AS10101 190AS10102 190AS10103 190AS10201 190AS10202 190AS10203 190AS10301 190AS10302 190AS10303 190AS10401 190AS10402 190AS10403 190AS10501 190AS10502 190AS10503 190AS10601 190AS10602 190AS10603 190AS11101 190AS11102 190AS11103 190AS11201 190AS11202 190AS11203 190AS11301 190AS11302 190AS11303 190AS11401 190AS11402 190AS11403 190AS11501 190AS11502 190AS11503 190AS11601 190AS11602 190AS11603 190AS12101 190AS12102 190AS12103 190AS12201 190AS12202 190AS12203 190AS12301 190AS12302 190AS12303 190AS12401 190AS12402 190AS12403 190AS12501 190AS12502 190AS12503 190AS12601 190AS12602 190AS12603 190AS13101 190AS13102 190AS13103 190AS13201 190AS13202 190AS13203 190AS13301 190AS13302 190AS13303 190AS13401 190AS13402 190AS13403 190AS13501 190
AS18902 192AS18903 192AS19101 192AS19102 192AS19103 192AS19201 192AS19202 192AS19203 192AS19301 192AS19302 192AS19303 192AS19401 192AS19402 192AS19403 192AS19501 192AS19502 192AS19503 192AS19601 192AS19602 192AS19603 192AS19701 192AS19702 192AS19703 192AS19801 192AS19802 192AS19803 192AS19901 192AS19902 192AS19903 192AS20101 192AS20102 192AS20103 192AS20201 192AS20202 192AS20203 192AS20301 192AS20302 192AS20303 192AS20401 192AS20402 192AS20403 192AS20501 192AS20502 192AS20503 192AS20601 192AS20602 192AS20603 192AS20701 192AS20702 192AS20703 192AS20801 192AS20802 192AS20803 192AS20901 192AS20902 192AS20903 192AS21101 192AS21102 192AS21103 192AS21201 192AS21202 192AS21203 192AS21301 192AS21302 192AS21303 192AS21401 192AS21402 192AS21403 192AS21501 192
AS13502 190AS13503 190AS13601 190AS13602 190AS13603 190AS14101 191AS14102 191AS14103 191AS14201 191AS14202 191AS14203 191AS14301 191AS14302 191AS14303 191AS14401 191AS14402 191AS14403 191AS14501 191AS14502 191AS14503 191AS14601 191AS14602 191AS14603 191AS14701 191AS14702 191AS14703 191AS14801 191AS14802 191AS14803 191AS14901 191AS14902 191AS14903 191AS15101 191AS15102 191AS15103 191AS15201 191AS15202 191AS15203 191AS15301 191AS15302 191AS15303 191AS15401 191AS15402 191AS15403 191AS15501 191AS15502 191AS15503 191AS15601 191AS15602 191AS15603 191AS15701 191AS15702 191AS15703 191AS15801 191AS15802 191AS15803 191AS15901 191AS15902 191AS15903 191AS16101 191AS16102 191AS16103 191AS16201 191AS16202 191AS16203 191AS16301 191AS16302 191AS16303 191AS16401 191
AS21502 192AS21503 192AS21601 192AS21602 192AS21603 192AS21701 192AS21702 192AS21703 192AS21801 192AS21802 192AS21803 192AS21901 192AS21902 192AS21903 192AS22101 195AS22102 195AS22103 195AS22201 195AS22202 195AS22203 195AS23101 195AS23102 195AS23103 195AS23201 195AS23202 195AS23203 195AS24101 195AS24102 195AS24103 195AS24201 195AS24202 195AS24203 195AS25101 195AS25102 195AS25103 195AS25201 195AS25202 195AS25203 195AS80201 197AS80202 197AS80203 197BT10101 222BT10102 222BT10103 222BT10201 222BT10202 222BT10203 222BT10301 222BT10302 222BT10303 222BT10401 222BT10402 222BT10403 222BT10501 222BT10502 222BT10503 222BT10601 222BT10602 222BT10603 222BT11101 222BT11102 222BT11103 222BT11201 222BT11202 222BT11203 222BT11301 222BT11302 222BT11303 222BT11401 222
AS16402 191AS16403 191AS16501 191AS16502 191AS16503 191AS16601 191AS16602 191AS16603 191AS16701 191AS16702 191AS16703 191AS16801 191AS16802 191AS16803 191AS16901 191AS16902 191AS16903 191AS17101 191AS17102 191AS17103 191AS17201 191AS17202 191AS17203 191AS17301 191AS17302 191AS17303 191AS17401 191AS17402 191AS17403 191AS17501 191AS17502 191AS17503 191AS17601 191AS17602 191AS17603 191AS17701 191AS17702 191AS17703 191AS17801 191AS17802 191AS17803 191AS17901 191AS17902 191AS17903 191AS18101 192AS18102 192AS18103 192AS18201 192AS18202 192AS18203 192AS18301 192AS18302 192AS18303 192AS18401 192AS18402 192AS18403 192AS18501 192AS18502 192AS18503 192AS18601 192AS18602 192AS18603 192AS18701 192AS18702 192AS18703 192AS18801 192AS18802 192AS18803 192AS18901 192
BT11402 222BT11403 222BT80101 224BT80102 224BT80201 225BT80202 225BT80301 225BT80302 225BT80401 224BT80402 224BT80403 224BT80501 225BT80502 225BT80503 225BT80601 225BT80602 225BT80603 225BT80701 225BT80702 225BT811 224BT812 224BT813 224BT814 224BT818 224BT819 224BT820 224BT821 224BT822 224BT823 224BT824 224BT825 224BT826 224BT827 224BT828 224CI10101 82CI10102 82CI10103 82CI10201 82CI10202 82CI10203 82CI10301 82CI10302 82CI10303 82CI10401 82CI10402 82CI10403 82CI11101 80CI11102 80CI11103 80CI11201 80CI11202 80CI11203 80CI11301 80CI11302 80CI11303 80CI11401 80CI11402 80CI11403 80CI12101 81CI12102 81CI12103 81CI12201 81CI12202 81CI12203 81CI12301 81CI12302 81CI12303 81CI12401 81CI12402 81
Plexiform 343
COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG.
CODE INDEXCI12403 81CI801 83CK101 329CK102 329CK103 329CK104 329CK111 330CK112 330CK113 330CK114 330CK115 330CK116 330CK117 330CK118 330CK119 330CK121 331CK122 331CK123 331CK124 331CK125 331CK126 331CK127 331CK128 331CK129 331CK131 330CK132 330CK133 330CK134 330CK135 330CK136 330CK137 330CK141 331CK142 331CK143 331CK144 331CK145 331CK146 331CK147 331DI10101 43DI10102 43DI10103 43DI10201 43DI10202 43DI10203 43DI10301 43DI10302 43DI10303 43DI10401 43DI10402 43DI10403 43DI10501 43DI10502 43DI10503 43DI10601 43DI10602 43DI10603 43DI80101 43DI80102 43DI80103 43DI80301 43DI80302 43DI80303 43DI80401 43DI80402 43DI80403 43DI805 43DI806 43DI807 43DL10101 215
DL22102 209DL22103 209DL22201 209DL22202 209DL22203 209DL22301 209DL22302 209DL22303 209DL22401 209DL22402 209DL22403 209DL22501 209DL22502 209DL22503 209DL22601 209DL22602 209DL22603 209DL22701 209DL22702 209DL22703 209DL22801 209DL22802 209DL22803 209DL23101 209DL23102 209DL23103 209DL23201 209DL23202 209DL23203 209DL23301 209DL23302 209DL23303 209DL23401 209DL23402 209DL23403 209DL23501 209DL23502 209DL23503 209DL23601 209DL23602 209DL23603 209DL80101 216DL80102 216DL80103 216DL80201 210DL80202 210DL80203 210DL80301 211DL80302 211DL80303 211DL80401 211DL80402 211DL805 211DL806 211DL807 211DL808 211DL809 211DL810 211DL811 211DL812 211DL813 211DL814 211DL815 210DL816 210DL817 210DL818 210DL819 210DL820 210DL821 210
DL10102 215DL10103 215DL10201 215DL10202 215DL10203 215DL10301 215DL10302 215DL10303 215DL10401 215DL10402 215DL10403 215DL10501 215DL10502 215DL10503 215DL10601 215DL10602 215DL10603 215DL11101 215DL11102 215DL11103 215DL11201 215DL11202 215DL11203 215DL11301 215DL11302 215DL11303 215DL11401 215DL11402 215DL11403 215DL11501 215DL11502 215DL11503 215DL11601 215DL11602 215DL11603 215DL11701 215DL11702 215DL11703 215DL11801 215DL11802 215DL11803 215DL11901 215DL11902 215DL11903 215DL12001 215DL12002 215DL12003 215DL12101 215DL12102 215DL12103 215DL12201 215DL12202 215DL12203 215DL12301 215DL12302 215DL12303 215DL12401 215DL12402 215DL12403 215DL12501 215DL12502 215DL12503 215DL12601 215DL12602 215DL12603 215DL12701 215DL12702 215DL12703 215DL12801 215
DL822 210DL823 210DL824 210DL825 210DL826 210DL827 210DL828 210DL829 210DL830 210DL831 210DL832 210DL833 210DL834 210DL835 216DL836 216DL837 216DL838 216DL839 216DL840 216DL841 216DL842 216DL843 216DL844 216DL84501 216DL84502 216DL84503 216DN10101 28DN10102 28DN10103 28DN10201 28DN10202 28DN10203 28DN10301 28DN10302 28DN10303 28DN10401 28DN10402 28DN10403 28DN10501 28DN10502 28DN10503 28DN10601 28DN10602 28DN10603 28DN11101 27DN11102 27DN11103 27DN11201 27DN11202 27DN11203 27DN11301 27DN11302 27DN11303 27DN11401 27DN11402 27DN11403 27DN11501 27DN11502 27DN11503 27DN11601 27DN11602 27DN11603 27DN12101 27DN12102 27DN12103 27DN12201 27DN12202 27DN12203 27DN12301 27
DL12802 215DL12803 215DL13101 215DL13102 215DL13103 215DL13201 215DL13202 215DL13203 215DL13301 215DL13302 215DL13303 215DL13401 215DL13402 215DL13403 215DL13501 215DL13502 215DL13503 215DL13601 215DL13602 215DL13603 215DL20101 209DL20102 209DL20103 209DL20201 209DL20202 209DL20203 209DL20301 209DL20302 209DL20303 209DL20401 209DL20402 209DL20403 209DL20501 209DL20502 209DL20503 209DL20601 209DL20602 209DL20603 209DL21101 209DL21102 209DL21103 209DL21201 209DL21202 209DL21203 209DL21301 209DL21302 209DL21303 209DL21401 209DL21402 209DL21403 209DL21501 209DL21502 209DL21503 209DL21601 209DL21602 209DL21603 209DL21701 209DL21702 209DL21703 209DL21801 209DL21802 209DL21803 209DL21901 209DL21902 209DL21903 209DL22001 209DL22002 209DL22003 209DL22101 209
DN12302 27DN12303 27DN12401 27DN12402 27DN12403 27DN13101 32DN13102 32DN13103 32DN13201 32DN13202 32DN13203 32DN13301 32DN13302 32DN13303 32DN13401 32DN13402 32DN13403 32DN13501 32DN13502 32DN13503 32DN13601 32DN13602 32DN13603 32DN14101 31DN14102 31DN14103 31DN14201 31DN14202 31DN14203 31DN14301 31DN14302 31DN14303 31DN14401 31DN14402 31DN14403 31DN14501 31DN14502 31DN14503 31DN14601 31DN14602 31DN14603 31DN15101 35DN15102 35DN15103 35DN15201 35DN15202 35DN15203 35DN15301 35DN15302 35DN15303 35DN15401 35DN15402 35DN15403 35DN15501 35DN15502 35DN15503 35DN15601 35DN15602 35DN15603 35DN80101 36DN80102 36DN80103 36DN80201 36DN80202 36DN80203 36DN803 37DN80601 37DN80602 37DN80603 37
344 Plexiform
COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG.
INDICE PER CODICEEC17801 179EC17802 179EC17803 179EC17901 179EC17902 179EC17903 179EC18101 180EC18102 180EC18103 180EC18201 180EC18202 180EC18203 180EC18301 180EC18302 180EC18303 180EC18401 180EC18402 180EC18403 180EC18501 180EC18502 180EC18503 180EC18601 180EC18602 180EC18603 180EC18701 180EC18702 180EC18703 180EC18801 180EC18802 180EC18803 180EC18901 180EC18902 180EC18903 180EC19101 180EC19102 180EC19103 180EC19201 180EC19202 180EC19203 180EC19301 180EC19302 180EC19303 180EC19401 180EC19402 180EC19403 180EC19501 180EC19502 180EC19503 180EC19601 180EC19602 180EC19603 180EC19701 180EC19702 180EC19703 180EC19801 180EC19802 180EC19803 180EC19901 180EC19902 180EC19903 180EC20101 180EC20102 180EC20103 180EC20201 180EC20202 180EC20203 180EC20301 180EC20302 180EC20303 180
EC15301 179EC15302 179EC15303 179EC15401 179EC15402 179EC15403 179EC15501 179EC15502 179EC15503 179EC15601 179EC15602 179EC15603 179EC15701 179EC15702 179EC15703 179EC15801 179EC15802 179EC15803 179EC15901 179EC15902 179EC15903 179EC16101 179EC16102 179EC16103 179EC16201 179EC16202 179EC16203 179EC16301 179EC16302 179EC16303 179EC16401 179EC16402 179EC16403 179EC16501 179EC16502 179EC16503 179EC16601 179EC16602 179EC16603 179EC16701 179EC16702 179EC16703 179EC16801 179EC16802 179EC16803 179EC16901 179EC16902 179EC16903 179EC17101 179EC17102 179EC17103 179EC17201 179EC17202 179EC17203 179EC17301 179EC17302 179EC17303 179EC17401 179EC17402 179EC17403 179EC17501 179EC17502 179EC17503 179EC17601 179EC17602 179EC17603 179EC17701 179EC17702 179EC17703 179
EC12101 178EC12102 178EC12103 178EC12201 178EC12202 178EC12203 178EC12301 178EC12302 178EC12303 178EC12401 178EC12402 178EC12403 178EC12501 178EC12502 178EC12503 178EC12601 178EC12602 178EC12603 178EC13101 178EC13102 178EC13103 178EC13201 178EC13202 178EC13203 178EC13301 178EC13302 178EC13303 178EC13401 178EC13402 178EC13403 178EC13501 178EC13502 178EC13503 178EC13601 178EC13602 178EC13603 178EC14101 179EC14102 179EC14103 179EC14201 179EC14202 179EC14203 179EC14301 179EC14302 179EC14303 179EC14401 179EC14402 179EC14403 179EC14501 179EC14502 179EC14503 179EC14601 179EC14602 179EC14603 179EC14701 179EC14702 179EC14703 179EC14801 179EC14802 179EC14803 179EC14901 179EC14902 179EC14903 179EC15101 179EC15102 179EC15103 179EC15201 179EC15202 179EC15203 179
DP80901 258DP80902 258DP80903 258DP81001 258DP81002 258DP81003 258DP81101 258DP81102 258DP81103 258DP81201 258DP81202 258DP81203 258DP81301 258DP81302 258DP81303 258DP81401 258DP81402 258DP81403 258DP81501 258DP81502 258DP81503 258DP81601 258DP81602 258DP81603 258DR101 49DR102 49DR103 49DR104 49DR105 49DR106 49DR801 49DR803 49DR804 49EC10101 178EC10102 178EC10103 178EC10201 178EC10202 178EC10203 178EC10301 178EC10302 178EC10303 178EC10401 178EC10402 178EC10403 178EC10501 178EC10502 178EC10503 178EC10601 178EC10602 178EC10603 178EC11101 178EC11102 178EC11103 178EC11201 178EC11202 178EC11203 178EC11301 178EC11302 178EC11303 178EC11401 178EC11402 178EC11403 178EC11501 178EC11502 178EC11503 178EC11601 178EC11602 178EC11603 178
DP12101 257DP12102 257DP12103 257DP12201 257DP12202 257DP12203 257DP12301 257DP12302 257DP12303 257DP12401 257DP12402 257DP12403 257DP12501 257DP12502 257DP12503 257DP12601 257DP12602 257DP12603 257DP13101 257DP13102 257DP13103 257DP13201 257DP13202 257DP13203 257DP13301 257DP13302 257DP13303 257DP13401 257DP13402 257DP13403 257DP13501 257DP13502 257DP13503 257DP13601 257DP13602 257DP13603 257DP13701 257DP13702 257DP13703 257DP13801 257DP13802 257DP13803 257DP13901 257DP13902 257DP13903 257DP80101 258DP80102 258DP80103 258DP80201 259DP80202 259DP80203 259DP80301 258DP80302 258DP80303 258DP80401 258DP80402 258DP80403 258DP80501 258DP80502 258DP80503 258DP80601 258DP80602 258DP80603 258DP80701 258DP80702 258DP80703 258DP80801 258DP80802 258DP80803 258
DN80701 37DN80702 37DN80703 37DN80801 37DN80802 37DN80803 37DN80901 36DN80902 36DN80903 36DN81001 31DN81002 31DN81003 31DN81101 31DN81102 31DN81103 31DN81201 27DN81202 27DN81203 27DN81301 27DN81302 27DN81303 27DN81401 36DN81402 36DN81403 36DP10101 255DP10102 255DP10103 255DP10201 255DP10202 255DP10203 255DP10301 255DP10302 255DP10303 255DP10401 255DP10402 255DP10403 255DP10501 255DP10502 255DP10503 255DP10601 255DP10602 255DP10603 255DP11101 255DP11102 255DP11103 255DP11201 255DP11202 255DP11203 255DP11301 255DP11302 255DP11303 255DP11401 255DP11402 255DP11403 255DP11501 255DP11502 255DP11503 255DP11601 255DP11602 255DP11603 255DP11701 255DP11702 255DP11703 255DP11801 255DP11802 255DP11803 255DP11901 255DP11902 255DP11903 255
Plexiform 345
COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG.
CODE INDEXEY15201 273EY15202 273EY15203 273EY15301 273EY15302 273EY15303 273EY15401 273EY15402 273EY15403 273EY15501 273EY15502 273EY15503 273EY15601 273EY15602 273EY15603 273EY15701 273EY15702 273EY15703 273FI101 275FI102 275FI111 275FI112 275FI121 276FI122 276FI131 276FI132 276FL10101 86FL10102 86FL10103 86FL10104 86FL10201 86FL10202 86FL10203 86FL10204 86FL10501 86FL10502 86FL10503 86FL10504 86FL10601 86FL10602 86FL10603 86FL10604 86FL11101 87FL11102 87FL11103 87FL11104 87FL11201 87FL11202 87FL11203 87FL11204 87FL11501 87FL11502 87FL11503 87FL11504 87FL11601 87FL11602 87FL11603 87FL11604 87FU101 96FU102 96FU801 96FU802 96FU803 96GL101 333GL102 333GL103 333GL104 333GL105 333GL106 333
EY11701 271EY11702 271EY11703 271EY11801 271EY11802 271EY11803 271EY11901 271EY11902 271EY11903 271EY12001 271EY12002 271EY12003 271EY12101 271EY12102 271EY12103 271EY12201 271EY12202 271EY12203 271EY12301 271EY12302 271EY12303 271EY12401 271EY12402 271EY12403 271EY12501 271EY12502 271EY12503 271EY12601 271EY12602 271EY12603 271EY12701 271EY12702 271EY12703 271EY14001 273EY14002 273EY14003 273EY14101 273EY14102 273EY14103 273EY14201 273EY14202 273EY14203 273EY14301 273EY14302 273EY14303 273EY14401 273EY14402 273EY14403 273EY14501 273EY14502 273EY14503 273EY14601 273EY14602 273EY14603 273EY14701 273EY14702 273EY14703 273EY14801 273EY14802 273EY14803 273EY14901 273EY14902 273EY14903 273EY15001 273EY15002 273EY15003 273EY15101 273EY15102 273EY15103 273
EK16401 203EK16402 203EK16403 203EK16501 203EK16502 203EK16503 203EK16601 203EK16602 203EK16603 203EK17101 203EK17102 203EK17103 203EK17201 203EK17202 203EK17203 203EK17301 203EK17302 203EK17303 203EK17401 203EK17402 203EK17403 203EK17501 203EK17502 203EK17503 203EK17601 203EK17602 203EK17603 203EK80101 204EK80102 204EK80103 204EK80201 205EK80202 205EK80203 205EK80301 205EK80302 205EK80303 205EK804 204EK805 204EK806 204EK807 204EK808 204EK809 204EK810 204EK811 204EK812 204EK813 204EK814 204EK815 204EY11001 271EY11002 271EY11003 271EY11101 271EY11102 271EY11103 271EY11201 271EY11202 271EY11203 271EY11301 271EY11302 271EY11303 271EY11401 271EY11402 271EY11403 271EY11501 271EY11502 271EY11503 271EY11601 271EY11602 271EY11603 271
EK13501 202EK13502 202EK13503 202EK13601 202EK13602 202EK13603 202EK14101 202EK14102 202EK14103 202EK14201 202EK14202 202EK14203 202EK14301 202EK14302 202EK14303 202EK14401 202EK14402 202EK14403 202EK14501 202EK14502 202EK14503 202EK14601 202EK14602 202EK14603 202EK14701 202EK14702 202EK14703 202EK14801 202EK14802 202EK14803 202EK14901 202EK14902 202EK14903 202EK15101 202EK15102 202EK15103 202EK15201 202EK15202 202EK15203 202EK15301 202EK15302 202EK15303 202EK15401 202EK15402 202EK15403 202EK15501 202EK15502 202EK15503 202EK15601 202EK15602 202EK15603 202EK15701 202EK15702 202EK15703 202EK15801 202EK15802 202EK15803 202EK15901 202EK15902 202EK15903 202EK16101 203EK16102 203EK16103 203EK16201 203EK16202 203EK16203 203EK16301 203EK16302 203EK16303 203
EC80201 185EC80202 185EC80203 185EK10101 201EK10102 201EK10103 201EK10201 201EK10202 201EK10203 201EK10301 201EK10302 201EK10303 201EK10401 201EK10402 201EK10403 201EK10501 201EK10502 201EK10503 201EK10601 201EK10602 201EK10603 201EK11101 201EK11102 201EK11103 201EK11201 201EK11202 201EK11203 201EK11301 201EK11302 201EK11303 201EK11401 201EK11402 201EK11403 201EK11501 201EK11502 201EK11503 201EK11601 201EK11602 201EK11603 201EK12101 201EK12102 201EK12103 201EK12201 201EK12202 201EK12203 201EK12301 201EK12302 201EK12303 201EK12401 201EK12402 201EK12403 201EK12501 201EK12502 201EK12503 201EK12601 201EK12602 201EK12603 201EK13101 202EK13102 202EK13103 202EK13201 202EK13202 202EK13203 202EK13301 202EK13302 202EK13303 202EK13401 202EK13402 202EK13403 202
EC20401 180EC20402 180EC20403 180EC20501 180EC20502 180EC20503 180EC20601 180EC20602 180EC20603 180EC20701 180EC20702 180EC20703 180EC20801 180EC20802 180EC20803 180EC20901 180EC20902 180EC20903 180EC21101 180EC21102 180EC21103 180EC21201 180EC21202 180EC21203 180EC21301 180EC21302 180EC21303 180EC21401 180EC21402 180EC21403 180EC21501 180EC21502 180EC21503 180EC21601 180EC21602 180EC21603 180EC21701 180EC21702 180EC21703 180EC21801 180EC21802 180EC21803 180EC21901 180EC21902 180EC21903 180EC22101 183EC22102 183EC22103 183EC22201 183EC22202 183EC22203 183EC23101 183EC23102 183EC23103 183EC23201 183EC23202 183EC23203 183EC24101 183EC24102 183EC24103 183EC24201 183EC24202 183EC24203 183EC25101 183EC25102 183EC25103 183EC25201 183EC25202 183EC25203 183
346 Plexiform
COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG.
INDICE PER CODICEMZ107 304MZ108 304MZ109 304MZ111 303MZ112 303MZ113 303MZ114 303MZ115 303MZ116 303MZ117 303MZ118 303MZ119 303MZ121 305MZ122 305ON10101 69ON10102 69ON10103 69ON10201 69ON10202 69ON10203 69ON10301 69ON10302 69ON10303 69ON10401 69ON10402 69ON10403 69ON10501 69ON10502 69ON10503 69ON10601 69ON10602 69ON10603 69ON11101 69ON11102 69ON11103 69ON11201 69ON11202 69ON11203 69ON11301 69ON11302 69ON11303 69ON11401 69ON11402 69ON11403 69ON11501 69ON11502 69ON11503 69ON11601 69ON11602 69ON11603 69OV10101 54OV10102 54OV10103 54OV10201 54OV10202 54OV10203 54OV10301 54OV10302 54OV10303 54OV10401 54OV10402 54OV10403 54OV10501 54OV10502 54OV10503 54OV10601 54OV10602 54OV10603 54OV11301 54
MT81901 250MT81902 250MT81903 250MT82001 250MT82002 250MT82003 250MT82101 250MT82102 250MT82103 250MT82201 250MT82202 250MT82203 250MT823 250MT824 251MV10101 60MV10102 60MV10103 60MV10201 60MV10202 60MV10203 60MV10301 60MV10302 60MV10303 60MV10401 60MV10402 60MV10403 60MV10501 60MV10502 60MV10503 60MV10601 60MV10602 60MV10603 60MV11301 60MV11302 60MV11303 60MV11401 60MV11402 60MV11403 60MV11501 60MV11502 60MV11503 60MV11601 60MV11602 60MV11603 60MV80101 61MV80102 61MV80103 61MV802 61MV803 61MV804 61MV80501 61MV80502 61MV80503 61MV806 61MV80901 61MV80902 61MV80903 61MV81001 60MV81002 60MV81003 60MV81101 60MV81102 60MV81103 60MZ101 304MZ102 304MZ103 304MZ104 304MZ105 304MZ106 304
MT40501 249MT40502 249MT40503 249MT40601 249MT40602 249MT40603 249MT40701 249MT40702 249MT40703 249MT40801 249MT40802 249MT40803 249MT40901 249MT40902 249MT40903 249MT80101 250MT80102 250MT80103 250MT80201 250MT80202 250MT80203 250MT80301 251MT80302 251MT80303 251MT80401 251MT80402 251MT80403 251MT80501 251MT80502 251MT80503 251MT80601 251MT80602 251MT80603 251MT80701 250MT80702 250MT80703 250MT80801 250MT80802 250MT80803 250MT80901 250MT80902 250MT80903 250MT81001 250MT81002 250MT81003 250MT81101 250MT81102 250MT81103 250MT81201 250MT81202 250MT81203 250MT81301 250MT81302 250MT81303 250MT81401 250MT81402 250MT81403 250MT81501 250MT81502 250MT81503 250MT81601 250MT81602 250MT81603 250MT81701 250MT81702 250MT81703 250MT81801 250MT81802 250MT81803 250
MT10901 247MT10902 247MT10903 247MT20101 247MT20102 247MT20103 247MT20201 247MT20202 247MT20203 247MT20301 247MT20302 247MT20303 247MT20401 247MT20402 247MT20403 247MT20501 247MT20502 247MT20503 247MT20601 247MT20602 247MT20603 247MT20701 247MT20702 247MT20703 247MT20801 247MT20802 247MT20803 247MT20901 247MT20902 247MT20903 247MT30101 249MT30102 249MT30103 249MT30201 249MT30202 249MT30203 249MT30301 249MT30302 249MT30303 249MT30401 249MT30402 249MT30403 249MT30501 249MT30502 249MT30503 249MT30601 249MT30602 249MT30603 249MT30701 249MT30702 249MT30703 249MT30801 249MT30802 249MT30803 249MT30901 249MT30902 249MT30903 249MT40101 249MT40102 249MT40103 249MT40201 249MT40202 249MT40203 249MT40301 249MT40302 249MT40303 249MT40401 249MT40402 249MT40403 249
LL128 314LL129 314LL801 315LM10101 77LM10102 77LM10103 77LM10201 77LM10202 77LM10203 77LM10301 77LM10302 77LM10303 77LM10401 77LM10402 77LM10403 77LM10501 77LM10502 77LM10503 77LM10601 77LM10602 77LM10603 77LM11101 77LM11102 77LM11103 77LM11201 77LM11202 77LM11203 77LM11301 77LM11302 77LM11303 77LM11401 77LM11402 77LM11403 77LM11501 77LM11502 77LM11503 77LM11601 77LM11602 77LM11603 77LM801 77LM802 77LM803 77LM804 77LM805 77LM806 77MT10101 247MT10102 247MT10103 247MT10201 247MT10202 247MT10203 247MT10301 247MT10302 247MT10303 247MT10401 247MT10402 247MT10403 247MT10501 247MT10502 247MT10503 247MT10601 247MT10602 247MT10603 247MT10701 247MT10702 247MT10703 247MT10801 247MT10802 247MT10803 247
GL111 334GL112 334GL113 334GL114 334GL115 334GL121 335GL122 335GL123 335GL124 335GL125 335GL126 335GL801 334GL802 334GL803 334GL804 335GL805 335GL806 335LG10101 73LG10102 73LG10103 73LG10201 73LG10202 73LG10203 73LG10301 73LG10302 73LG10303 73LG10401 73LG10402 73LG10403 73LG10501 73LG10502 73LG10503 73LG10601 73LG10602 73LG10603 73LG11101 73LG11102 73LG11103 73LG11201 73LG11202 73LG11203 73LG11301 73LG11302 73LG11303 73LG11401 73LG11402 73LG11403 73LG11501 73LG11502 73LG11503 73LG11601 73LG11602 73LG11603 73LL101 313LL102 313LL103 313LL104 313LL105 313LL106 313LL107 313LL108 313LL120 314LL121 314LL122 314LL123 314LL124 314LL125 314LL126 314LL127 314
Plexiform 347
COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG.
CODE INDEXPL19203 168PL19301 168PL19302 168PL19303 168PL19401 168PL19402 168PL19403 168PL19501 168PL19502 168PL19503 168PL19601 168PL19602 168PL19603 168PL19701 168PL19702 168PL19703 168PL19801 168PL19802 168PL19803 168PL19901 168PL19902 168PL19903 168PL20101 168PL20102 168PL20103 168PL20201 168PL20202 168PL20203 168PL20301 168PL20302 168PL20303 168PL20401 168PL20402 168PL20403 168PL20501 168PL20502 168PL20503 168PL20601 168PL20602 168PL20603 168PL20701 168PL20702 168PL20703 168PL20801 168PL20802 168PL20803 168PL20901 168PL20902 168PL20903 168PL21101 168PL21102 168PL21103 168PL21201 168PL21202 168PL21203 168PL21301 168PL21302 168PL21303 168PL21401 168PL21402 168PL21403 168PL21501 168PL21502 168PL21503 168PL21601 168PL21602 168PL21603 168PL21701 168PL21702 168
PL16603 167PL16701 167PL16702 167PL16703 167PL16801 167PL16802 167PL16803 167PL16901 167PL16902 167PL16903 167PL17101 167PL17102 167PL17103 167PL17201 167PL17202 167PL17203 167PL17301 167PL17302 167PL17303 167PL17401 167PL17402 167PL17403 167PL17501 167PL17502 167PL17503 167PL17601 167PL17602 167PL17603 167PL17701 167PL17702 167PL17703 167PL17801 167PL17802 167PL17803 167PL17901 167PL17902 167PL17903 167PL18101 168PL18102 168PL18103 168PL18201 168PL18202 168PL18203 168PL18301 168PL18302 168PL18303 168PL18401 168PL18402 168PL18403 168PL18501 168PL18502 168PL18503 168PL18601 168PL18602 168PL18603 168PL18701 168PL18702 168PL18703 168PL18801 168PL18802 168PL18803 168PL18901 168PL18902 168PL18903 168PL19101 168PL19102 168PL19103 168PL19201 168PL19202 168
PL14103 167PL14201 167PL14202 167PL14203 167PL14301 167PL14302 167PL14303 167PL14401 167PL14402 167PL14403 167PL14501 167PL14502 167PL14503 167PL14601 167PL14602 167PL14603 167PL14701 167PL14702 167PL14703 167PL14801 167PL14802 167PL14803 167PL14901 167PL14902 167PL14903 167PL15101 167PL15102 167PL15103 167PL15201 167PL15202 167PL15203 167PL15301 167PL15302 167PL15303 167PL15401 167PL15402 167PL15403 167PL15501 167PL15502 167PL15503 167PL15601 167PL15602 167PL15603 167PL15701 167PL15702 167PL15703 167PL15801 167PL15802 167PL15803 167PL15901 167PL15902 167PL15903 167PL16101 167PL16102 167PL16103 167PL16201 167PL16202 167PL16203 167PL16301 167PL16302 167PL16303 167PL16401 167PL16402 167PL16403 167PL16501 167PL16502 167PL16503 167PL16601 167PL16602 167
PL10203 166PL10301 166PL10302 166PL10303 166PL10401 166PL10402 166PL10403 166PL10501 166PL10502 166PL10503 166PL10601 166PL10602 166PL10603 166PL11101 166PL11102 166PL11103 166PL11201 166PL11202 166PL11203 166PL11301 166PL11302 166PL11303 166PL11401 166PL11402 166PL11403 166PL11501 166PL11502 166PL11503 166PL11601 166PL11602 166PL11603 166PL12101 166PL12102 166PL12103 166PL12201 166PL12202 166PL12203 166PL12301 166PL12302 166PL12303 166PL12401 166PL12402 166PL12403 166PL12501 166PL12502 166PL12503 166PL12601 166PL12602 166PL12603 166PL13101 166PL13102 166PL13103 166PL13201 166PL13202 166PL13203 166PL13301 166PL13302 166PL13303 166PL13401 166PL13402 166PL13403 166PL13501 166PL13502 166PL13503 166PL13601 166PL13602 166PL13603 166PL14101 167PL14102 167
PK144 319PK151 320PK152 320PK153 320PK154 320PK155 320PK161 320PK162 320PK163 320PK164 320PK171 321PK172 321PK173 321PK174 321PK181 321PK182 321PK183 321PK184 321PK191 321PK192 321PK193 321PK194 321PK201 322PK202 322PK203 322PK204 322PK211 323PK212 323PK213 323PK214 323PK221 323PK222 323PK223 323PK224 323PK231 324PK232 324PK233 324PK234 324PK241 325PK242 325PK243 325PK244 325PK251 325PK252 325PK253 325PK254 325PK817 326PK818 326PK819 326PK820 326PK821 326PK822 326PK823 326PK824 326PK825 326PK826 326PK827 326PK828 326PK829 326PK830 326PK831 326PK832 326PK833 326PK834 326PL10101 166PL10102 166PL10103 166PL10201 166PL10202 166
OV11302 54OV11303 54OV11401 54OV11402 54OV11403 54OV11501 54OV11502 54OV11503 54OV11601 54OV11602 54OV11603 54OV80101 55OV80102 55OV80103 55OV80201 55OV80202 55OV80203 55OV80301 55OV80302 55OV80303 55OV80401 54OV80402 54OV80403 54OV80501 54OV80502 54OV80503 54OV806 55OV807 55OV808 55PI101 296PI102 296PI103 296PI104 296PI111 297PI112 297PI113 297PI114 297PI121 295PI122 295PI123 295PI124 295PI131 298PI132 298PI133 298PI141 299PI142 299PI143 299PI151 300PI152 301PK101 318PK102 318PK103 318PK104 318PK105 318PK111 318PK112 318PK113 318PK114 318PK121 319PK122 319PK123 319PK124 319PK131 319PK132 319PK133 319PK134 319PK141 319PK142 319PK143 319
348 Plexiform
COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG.
INDICE PER CODICEQD18902 119QD18903 119QD80101 122QD80102 122QD80103 122QD80201 123QD80202 123QD80203 123QD80301 123QD80302 123QD80303 123QD80401 123QD80402 123QD80403 123QD80501 123QD80502 123QD80503 123QI10101 129QI10102 129QI10103 129QI10201 129QI10202 129QI10203 129QI10301 129QI10302 129QI10303 129QI10401 129QI10402 129QI10403 129QI10501 129QI10502 129QI10503 129QI10601 129QI10602 129QI10603 129QI11101 129QI11102 129QI11103 129QI11201 129QI11202 129QI11203 129QI11301 129QI11302 129QI11303 129QI11401 129QI11402 129QI11403 129QI11501 129QI11502 129QI11503 129QI11601 129QI11602 129QI11603 129QI11701 129QI11702 129QI11703 129QI11801 129QI11802 129QI11803 129QI11901 129QI11902 129QI11903 129QI12101 131QI12102 131QI12103 131QI12201 131QI12202 131QI12203 131QI12301 131
QD16102 119QD16103 119QD16201 119QD16202 119QD16203 119QD16301 119QD16302 119QD16303 119QD16401 119QD16402 119QD16403 119QD16501 119QD16502 119QD16503 119QD16601 119QD16602 119QD16603 119QD17101 119QD17102 119QD17103 119QD17201 119QD17202 119QD17203 119QD17301 119QD17302 119QD17303 119QD17401 119QD17402 119QD17403 119QD17501 119QD17502 119QD17503 119QD17601 119QD17602 119QD17603 119QD17701 119QD17702 119QD17703 119QD17801 119QD17802 119QD17803 119QD17901 119QD17902 119QD17903 119QD18101 119QD18102 119QD18103 119QD18201 119QD18202 119QD18203 119QD18301 119QD18302 119QD18303 119QD18401 119QD18402 119QD18403 119QD18501 119QD18502 119QD18503 119QD18601 119QD18602 119QD18603 119QD18701 119QD18702 119QD18703 119QD18801 119QD18802 119QD18803 119QD18901 119
QD13202 121QD13203 121QD13301 121QD13302 121QD13303 121QD13401 121QD13402 121QD13403 121QD13501 121QD13502 121QD13503 121QD13601 121QD13602 121QD13603 121QD14101 121QD14102 121QD14103 121QD14201 121QD14202 121QD14203 121QD14301 121QD14302 121QD14303 121QD14401 121QD14402 121QD14403 121QD14501 121QD14502 121QD14503 121QD14601 121QD14602 121QD14603 121QD14701 121QD14702 121QD14703 121QD14801 121QD14802 121QD14803 121QD14901 121QD14902 121QD14903 121QD15101 121QD15102 121QD15103 121QD15201 121QD15202 121QD15203 121QD15301 121QD15302 121QD15303 121QD15401 121QD15402 121QD15403 121QD15501 121QD15502 121QD15503 121QD15601 121QD15602 121QD15603 121QD15701 121QD15702 121QD15703 121QD15801 121QD15802 121QD15803 121QD15901 121QD15902 121QD15903 121QD16101 119
QD10302 117QD10303 117QD10401 117QD10402 117QD10403 117QD10501 117QD10502 117QD10503 117QD10601 117QD10602 117QD10603 117QD11101 117QD11102 117QD11103 117QD11201 117QD11202 117QD11203 117QD11301 117QD11302 117QD11303 117QD11401 117QD11402 117QD11403 117QD11501 117QD11502 117QD11503 117QD11601 117QD11602 117QD11603 117QD11701 117QD11702 117QD11703 117QD11801 117QD11802 117QD11803 117QD11901 117QD11902 117QD11903 117QD12101 117QD12102 117QD12103 117QD12201 117QD12202 117QD12203 117QD12301 117QD12302 117QD12303 117QD12401 117QD12402 117QD12403 117QD12501 117QD12502 117QD12503 117QD12601 117QD12602 117QD12603 117QD12701 117QD12702 117QD12703 117QD12801 117QD12802 117QD12803 117QD12901 117QD12902 117QD12903 117QD13101 121QD13102 121QD13103 121QD13201 121
PR11603 235PR80101 236PR80201 237PR80301 237PR80401 236PR80402 236PR80403 236PR80501 237PR80502 237PR80503 237PR80601 237PR80602 237PR80603 237PR80701 237PU10101 241PU10102 241PU10103 241PU10201 241PU10202 241PU10203 241PU10301 241PU10302 241PU10303 241PU10401 241PU10402 241PU10403 241PU10501 241PU10502 241PU10503 241PU10601 241PU10602 241PU10603 241PU11101 241PU11102 241PU11103 241PU11201 241PU11202 241PU11203 241PU11301 241PU11302 241PU11303 241PU11401 241PU11402 241PU11403 241PU11501 241PU11502 241PU11503 241PU11601 241PU11602 241PU11603 241PU80101 242PU80102 242PU80201 243PU80202 243PU80301 242PU80302 242PU80303 242PU80401 243PU80402 243PU80403 243PU80501 243PU80502 243QD10101 117QD10102 117QD10103 117QD10201 117QD10202 117QD10203 117QD10301 117
PL21703 168PL21801 168PL21802 168PL21803 168PL21901 168PL21902 168PL21903 168PL22101 171PL22102 171PL22103 171PL22201 171PL22202 171PL22203 171PL23101 171PL23102 171PL23103 171PL23201 171PL23202 171PL23203 171PL24101 171PL24102 171PL24103 171PL24201 171PL24202 171PL24203 171PL25101 171PL25102 171PL25103 171PL25201 171PL25202 171PL25203 171PL80201 173PL80202 173PL80203 173PR10101 235PR10102 235PR10103 235PR10201 235PR10202 235PR10203 235PR10301 235PR10302 235PR10303 235PR10401 235PR10402 235PR10403 235PR10501 235PR10502 235PR10503 235PR10601 235PR10602 235PR10603 235PR11101 235PR11102 235PR11103 235PR11201 235PR11202 235PR11203 235PR11301 235PR11302 235PR11303 235PR11401 235PR11402 235PR11403 235PR11501 235PR11502 235PR11503 235PR11601 235PR11602 235
Plexiform 349
COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG.
CODE INDEXSV935 69TD101 91TD102 91TD103 90TD104 90TD105 92TD106 92TD111 91TD112 91TD113 90TD114 90TD115 92TD116 92TD121 91TD122 91TD123 90TD124 90TD125 92TD126 92TI10101 154TI10102 154TI10103 154TI10201 154TI10202 154TI10203 154TI10301 154TI10302 154TI10303 154TI10401 154TI10402 154TI10403 154TI10501 154TI10502 154TI10503 154TI10601 154TI10602 154TI10603 154TI11101 154TI11102 154TI11103 154TI11201 154TI11202 154TI11203 154TI11301 154TI11302 154TI11303 154TI11401 154TI11402 154TI11403 154TI11501 154TI11502 154TI11503 154TI11601 154TI11602 154TI11603 154TI12101 154TI12102 154TI12103 154TI12201 154TI12202 154TI12203 154TI12301 154TI12302 154TI12303 154TI12401 154TI12402 154TI12403 154TI12501 154TI12502 154
SV85303 172SV857 122SV858 122SV859 122SV860 122SV861 122SV862 122SV863 133SV864 133SV865 133SV87001 173SV87002 173SV87003 173SV871 69SV872 69SV873 69SV874 65SV875 65SV876 65SV877 36SV878 36SV879 36SV880 37SV88101 36SV88102 36SV88103 36SV882 110SV883 340SV884 341SV886 133SV887 133SV888 133SV889 133SV890 172SV891 172SV892 172SV893 172SV894 172SV895 172SV896 172SV897 236SV898 236SV899 236SV903 236SV904 236SV905 236SV906 236SV907 236SV908 236SV909 236SV910 236SV911 236SV918 37SV919 122SV920 37SV921 123SV922 173SV923 211SV924 216SV925 83SV926 65SV927 36SV928 36SV929 36SV930 69SV931 69SV932 69SV933 69SV934 69
SV80803 336SV80901 336SV80902 336SV80903 336SV81001 337SV81002 337SV81003 337SV81101 336SV81102 336SV81103 336SV81201 336SV81202 336SV81203 336SV81301 336SV81302 336SV81303 336SV814 337SV815 337SV816 339SV817 339SV818 339SV819 122SV820 122SV821 122SV822 122SV823 133SV824 133SV825 133SV826 133SV827 173SV828 225SV829 122SV830 122SV831 122SV832 122SV833 172SV834 172SV835 172SV836 173SV837 173SV838 173SV839 173SV840 172SV841 172SV842 172SV843 172SV844 172SV845 172SV846 172SV84701 172SV84702 172SV84703 172SV84801 172SV84802 172SV84803 172SV84901 172SV84902 172SV84903 172SV85001 172SV85002 172SV85003 172SV85101 172SV85102 172SV85103 172SV85201 172SV85202 172SV85203 172SV85301 172SV85302 172
RO104 280RO111 281RO112 281RO113 281RO114 281RO121 279RO122 279RO123 279RO124 279RO131 282RO132 282RO133 282RO141 283RO142 283RO143 283RO151 284RO152 285RU101 311RU102 311RU103 311RU104 311RU111 311RU112 311RU113 311SM101 309SM102 309SM103 309SM104 309SM111 309SM112 309SM113 309SM114 309SM121 308SM122 308SM123 308SM124 308SM131 309SM132 309SM133 309SM134 309SM135 309SM136 309SM137 309SM141 308SM142 308SM143 308SV80101 336SV80102 336SV80103 336SV80201 336SV80202 336SV80203 336SV80301 336SV80302 336SV80303 336SV80401 337SV80402 337SV80403 337SV80501 337SV80502 337SV80503 337SV80601 337SV80602 337SV80603 337SV80701 336SV80702 336SV80703 336SV80801 336SV80802 336
QU11301 263QU11302 263QU11303 263QU11401 263QU11402 263QU11403 263QU11501 263QU11502 263QU11503 263QU11601 263QU11602 263QU11603 263QU11701 263QU11702 263QU11703 263QU11801 263QU11802 263QU11803 263QU11901 263QU11902 263QU11903 263QU12101 265QU12102 265QU12103 265QU12201 265QU12202 265QU12203 265QU12301 265QU12302 265QU12303 265QU12401 265QU12402 265QU12403 265QU12501 265QU12502 265QU12503 265QU12601 265QU12602 265QU12603 265QU13101 265QU13102 265QU13103 265QU13201 265QU13202 265QU13203 265QU13301 265QU13302 265QU13303 265QU13401 265QU13402 265QU13403 265QU13501 265QU13502 265QU13503 265QU13601 265QU13602 265QU13603 265QU13701 265QU13702 265QU13703 265QU13801 265QU13802 265QU13803 265QU13901 265QU13902 265QU13903 265RO101 280RO102 280RO103 280
QI12302 131QI12303 131QI12401 131QI12402 131QI12403 131QI12501 131QI12502 131QI12503 131QI12601 131QI12602 131QI12603 131QI13101 131QI13102 131QI13103 131QI13201 131QI13202 131QI13203 131QI13301 131QI13302 131QI13303 131QI13401 131QI13402 131QI13403 131QI13501 131QI13502 131QI13503 131QI13601 131QI13602 131QI13603 131QI13701 131QI13702 131QI13703 131QI13801 131QI13802 131QI13803 131QI13901 131QI13902 131QI13903 131QI80101 132QI80102 132QI80103 132QI80201 133QI80202 133QI80203 133QI803 133QU10101 263QU10102 263QU10103 263QU10201 263QU10202 263QU10203 263QU10301 263QU10302 263QU10303 263QU10401 263QU10402 263QU10403 263QU10501 263QU10502 263QU10503 263QU10601 263QU10602 263QU10603 263QU11101 263QU11102 263QU11103 263QU11201 263QU11202 263QU11203 263
350 Plexiform
COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG.
INDICE PER CODICETS12402 139TS12403 139TS12501 139TS12502 139TS12503 139TS12601 139TS12602 139TS12603 139TS12701 139TS12702 139TS12703 139TS12801 139TS12802 139TS12803 139TS12901 139TS12902 139TS12903 139TS13001 139TS13002 139TS13003 139TS13101 139TS13102 139TS13103 139TS13201 139TS13202 139TS13203 139TS13301 139TS13302 139TS13303 139TS13401 139TS13402 139TS13403 139TS13501 139TS13502 139TS13503 139TS13601 139TS13602 139TS13603 139TS13701 139TS13702 139TS13703 139TS13801 139TS13802 139TS13803 139TS13901 139TS13902 139TS13903 139TS14101 141TS14102 141TS14103 141TS14201 141TS14202 141TS14203 141TS14301 141TS14302 141TS14303 141TS14401 141TS14402 141TS14403 141TS14501 141TS14502 141TS14503 141TS14601 141TS14602 141TS14603 141TS15101 141TS15102 141TS15103 141TS15201 141
TR10102 65TR10103 65TR10201 65TR10202 65TR10203 65TR10301 65TR10302 65TR10303 65TR10401 65TR10402 65TR10403 65TR10501 65TR10502 65TR10503 65TR10601 65TR10602 65TR10603 65TR801 65TR802 65TR803 65TS10101 139TS10102 139TS10103 139TS10201 139TS10202 139TS10203 139TS10301 139TS10302 139TS10303 139TS10401 139TS10402 139TS10403 139TS10501 139TS10502 139TS10503 139TS10601 139TS10602 139TS10603 139TS11101 139TS11102 139TS11103 139TS11201 139TS11202 139TS11203 139TS11301 139TS11302 139TS11303 139TS11401 139TS11402 139TS11403 139TS11501 139TS11502 139TS11503 139TS11601 139TS11602 139TS11603 139TS12001 139TS12002 139TS12003 139TS12101 139TS12102 139TS12103 139TS12201 139TS12202 139TS12203 139TS12301 139TS12302 139TS12303 139TS12401 139
TL10503 229TL10601 229TL10602 229TL10603 229TL11101 229TL11102 229TL11103 229TL11201 229TL11202 229TL11203 229TL11301 229TL11302 229TL11303 229TL11401 229TL11402 229TL11403 229TL80101 230TL80201 231TL80301 231TL80401 230TL80402 230TL80403 230TL80501 231TL80502 231TL80503 231TL80601 231TL80602 231TL80603 231TL80701 231TL811 230TL812 230TL813 230TL814 230TL818 230TL819 230TL820 230TL821 230TL822 230TL823 230TL824 230TL825 230TL826 230TL827 230TL828 230TO101 288TO102 288TO111 289TO112 289TO113 289TO114 289TO115 289TO116 289TO117 289TO121 287TO122 287TO123 287TO124 287TO125 287TO126 287TO127 287TO131 290TO132 290TO133 290TO141 291TO142 291TO143 291TO151 292TO152 293TR10101 65
TI18303 158TI18401 158TI18402 158TI18403 158TI18501 158TI18502 158TI18503 158TI18601 158TI18602 158TI18603 158TI19001 159TI19002 159TI19003 159TI19101 159TI19102 159TI19103 159TI19201 159TI19202 159TI19203 159TI19301 159TI19302 159TI19303 159TI19401 159TI19402 159TI19403 159TI20001 159TI20002 159TI20003 159TI20101 159TI20102 159TI20103 159TI20201 159TI20202 159TI20203 159TI20301 159TI20302 159TI20303 159TI20401 159TI20402 159TI20403 159TI21001 159TI21002 159TI21003 159TI21101 159TI21102 159TI21103 159TI21201 159TI21202 159TI21203 159TI21301 159TI21302 159TI21303 159TI21401 159TI21402 159TI21403 159TL10101 229TL10102 229TL10103 229TL10201 229TL10202 229TL10203 229TL10301 229TL10302 229TL10303 229TL10401 229TL10402 229TL10403 229TL10501 229TL10502 229
TI15103 155TI15201 155TI15202 155TI15203 155TI15301 155TI15302 155TI15303 155TI15401 155TI15402 155TI15403 155TI15501 155TI15502 155TI15503 155TI15601 155TI15602 155TI15603 155TI15701 155TI15702 155TI15703 155TI15801 155TI15802 155TI15803 155TI15901 155TI15902 155TI15903 155TI16101 158TI16102 158TI16103 158TI16201 158TI16202 158TI16203 158TI16301 158TI16302 158TI16303 158TI16401 158TI16402 158TI16403 158TI16501 158TI16502 158TI16503 158TI16601 158TI16602 158TI16603 158TI17101 158TI17102 158TI17103 158TI17201 158TI17202 158TI17203 158TI17301 158TI17302 158TI17303 158TI17401 158TI17402 158TI17403 158TI17501 158TI17502 158TI17503 158TI17601 158TI17602 158TI17603 158TI18101 158TI18102 158TI18103 158TI18201 158TI18202 158TI18203 158TI18301 158TI18302 158
TI12503 154TI12601 154TI12602 154TI12603 154TI13001 155TI13002 155TI13003 155TI13101 155TI13102 155TI13103 155TI13201 155TI13202 155TI13203 155TI13301 155TI13302 155TI13303 155TI13401 155TI13402 155TI13403 155TI13501 155TI13502 155TI13503 155TI13601 155TI13602 155TI13603 155TI13701 155TI13702 155TI13703 155TI13801 155TI13802 155TI13803 155TI13901 155TI13902 155TI13903 155TI14001 155TI14002 155TI14003 155TI14101 155TI14102 155TI14103 155TI14201 155TI14202 155TI14203 155TI14301 155TI14302 155TI14303 155TI14401 155TI14402 155TI14403 155TI14501 155TI14502 155TI14503 155TI14601 155TI14602 155TI14603 155TI14701 155TI14702 155TI14703 155TI14801 155TI14802 155TI14803 155TI14901 155TI14902 155TI14903 155TI15001 155TI15002 155TI15003 155TI15101 155TI15102 155
Plexiform 351
COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG. COD. PAG.
CODE INDEXVG818 109VG819 109VG820 109VG821 109VG822 109VG823 109VG827 109VG828 109VG829 109VG830 109VG831 109VG832 109VG833 109VG834 109VG835 108VG836 108VG837 108VG838 108VG839 108VG840 108VG841 108VG842 108VG843 108VG844 108VG845 108VG849 108VG850 108VG851 108VG852 108VG853 108VG854 108
VG12203 107VG12301 107VG12302 107VG12303 107VG12401 107VG12402 107VG12403 107VG12501 107VG12502 107VG12503 107VG12601 107VG12602 107VG12603 107VG12701 107VG12702 107VG12703 107VG12801 107VG12802 107VG12803 107VG13101 107VG13102 107VG13103 107VG13201 107VG13202 107VG13203 107VG13301 107VG13302 107VG13303 107VG13401 107VG13402 107VG13403 107VG13501 107VG13502 107VG13503 107VG13601 107VG13602 107VG13603 107VG80101 110VG80102 110VG80103 110VG80201 110VG80202 110VG80203 110VG80301 110VG80302 110VG80303 110VG80401 110VG80402 110VG80403 110VG80501 108VG80502 108VG80601 110VG80602 110VG80701 110VG80702 110VG80801 108VG80802 108VG80803 108VG80901 110VG80902 110VG80903 110VG81001 110VG81002 110VG81003 110VG81101 109VG81102 109VG812 109VG816 109VG817 109
TS80702 145TS80703 145TS80801 145TS80802 145TS80803 145TS80901 145TS80902 145TS80903 145TS810 144TS811 144TS812 144TS813 144TS814 144TS81801 144TS81802 144TS81803 144TS81901 144TS81902 144TS81903 144VG10101 107VG10102 107VG10103 107VG10201 107VG10202 107VG10203 107VG10301 107VG10302 107VG10303 107VG10401 107VG10402 107VG10403 107VG10501 107VG10502 107VG10503 107VG10601 107VG10602 107VG10603 107VG11101 107VG11102 107VG11103 107VG11201 107VG11202 107VG11203 107VG11301 107VG11302 107VG11303 107VG11401 107VG11402 107VG11403 107VG11501 107VG11502 107VG11503 107VG11601 107VG11602 107VG11603 107VG11701 107VG11702 107VG11703 107VG11801 107VG11802 107VG11803 107VG11901 107VG11902 107VG11903 107VG12101 107VG12102 107VG12103 107VG12201 107VG12202 107
TS21402 143TS21403 143TS30001 147TS30002 147TS30003 147TS30101 147TS30102 147TS30103 147TS31001 147TS31002 147TS31003 147TS31101 147TS31102 147TS31103 147TS32001 147TS32002 147TS32003 147TS32101 147TS32102 147TS32103 147TS33001 147TS33002 147TS33003 147TS33101 147TS33102 147TS33103 147TS34001 148TS34002 148TS34003 148TS34101 148TS34102 148TS34103 148TS35001 148TS35002 148TS35003 148TS35101 148TS35102 148TS35103 148TS36001 148TS36002 148TS36003 148TS36101 148TS36102 148TS36103 148TS37001 148TS37002 148TS37003 148TS37101 148TS37102 148TS37103 148TS80101 144TS80102 144TS80103 144TS80201 144TS80202 144TS80203 144TS80301 145TS80302 145TS80303 145TS80401 145TS80402 145TS80403 145TS80501 145TS80502 145TS80503 145TS80601 145TS80602 145TS80603 145TS80701 145
TS17802 141TS17803 141TS17901 141TS17902 141TS17903 141TS18101 143TS18102 143TS18103 143TS18201 143TS18202 143TS18203 143TS18301 143TS18302 143TS18303 143TS18401 143TS18402 143TS18403 143TS18501 143TS18502 143TS18503 143TS18601 143TS18602 143TS18603 143TS19101 143TS19102 143TS19103 143TS19201 143TS19202 143TS19203 143TS19301 143TS19302 143TS19303 143TS19401 143TS19402 143TS19403 143TS19501 143TS19502 143TS19503 143TS19601 143TS19602 143TS19603 143TS20001 143TS20002 143TS20003 143TS20101 143TS20102 143TS20103 143TS20201 143TS20202 143TS20203 143TS20301 143TS20302 143TS20303 143TS20401 143TS20402 143TS20403 143TS21001 143TS21002 143TS21003 143TS21101 143TS21102 143TS21103 143TS21201 143TS21202 143TS21203 143TS21301 143TS21302 143TS21303 143TS21401 143
TS15202 141TS15203 141TS15301 141TS15302 141TS15303 141TS15401 141TS15402 141TS15403 141TS15501 141TS15502 141TS15503 141TS15601 141TS15602 141TS15603 141TS16001 141TS16002 141TS16003 141TS16101 141TS16102 141TS16103 141TS16201 141TS16202 141TS16203 141TS16301 141TS16302 141TS16303 141TS16401 141TS16402 141TS16403 141TS16501 141TS16502 141TS16503 141TS16601 141TS16602 141TS16603 141TS16701 141TS16702 141TS16703 141TS16801 141TS16802 141TS16803 141TS16901 141TS16902 141TS16903 141TS17001 141TS17002 141TS17003 141TS17101 141TS17102 141TS17103 141TS17201 141TS17202 141TS17203 141TS17301 141TS17302 141TS17303 141TS17401 141TS17402 141TS17403 141TS17501 141TS17502 141TS17503 141TS17601 141TS17602 141TS17603 141TS17701 141TS17702 141TS17703 141TS17801 141
352 Plexiform
CONDIZIONI GENERALI DI VENDITAPREMESSELe ordinazioni dei nostri prodotti si intendono sempre accettate ai prezzi e alle condizioni di vendita in vigore all’epoca della consegna della merce. A fronte di eventuali variazioni di listino e quindi di prezzi e condizioni l’acquirente avrà la facoltà di annullare gli ordini in atto con lettera raccomandata, telefax o e-mail entro 48 ore dalla nostra comunicazione di variazioni. Le nostre offerte e conferme si intendono sempre salvo disponibilità. Le ordinazioni, anche se raccolte tramite il nostro agente di vendita, si intendono subordinate alla nostra accettazione, che può essere anche parziale.
DATI TECNICIGli acquirenti sono responsabili per la scelta degli articoli in relazione alle loro caratteristiche e all’uso cui sono destinati. Si raccomanda pertanto di effettuare il montaggio e l’utilizzo secondo la regola dell’arte e della buona tecnica, rispettando il D.P.R. 547 del 27/04/1955 e successive modifiche, nonché il D.L. 81/08 del 09/04/2008, successive modifiche e integrazioni. Le caratteristiche tecniche, fisiche e dimensionali degli articoli potranno subire variazioni senza alcun preavviso e obbligo di comunicazione, secondo le nostre esigenze di fabbricazione e che riterremo necessarie per il perfezionamento degli apparecchi. I disegni e le foto sono a puro titolo esplicativo e non vincolante, sono di nostra proprietà e non possono essere consegnate a terzi né riprodotti senza la nostra autorizzazione.
SPEDIZIONILe spedizioni e i trasporti con qualsiasi mezzo, anche se franco destino dell’acquirente o destinatario, si intendono sempre effettuati a rischio e pericolo dell’acquirente. È esclusa ogni nostra responsabilità in caso di rotture, avarie, furti o manomissioni durante il trasporto.
CONSEGNAIl termine di consegna indicato nella nostra conferma d’ordine non è vincolante, pertanto non siamo tenuti a corrispondere indennizzi di sorta per eventuali danni diretti e indiretti dovuti a ritardi di consegna, a interruzione o a risoluzione parziale o totale della fornitura. Il termine di consegna indicato si riferisce alla data di disponibilità presso la nostra sede per la spedizione o il ritiro.
RESI MERCENon si accetta in nessun caso merce di ritorno. L’eventuale reso dovrà sempre essere da noi autorizzato, e sarà accettato solo in porto franco con accredito del solo materiale in buono stato di conservazione e per quanto usufruibile, con una svalutazione minima pari al 10% (dieci per cento). Per il materiale eseguito su specifica richiesta ci riserviamo la facoltà di non accettare il reso.
PAGAMENTIIl pagamento della fornitura viene effettuato nella forma espressamente specificata nella conferma d’ordine. Non si accettano sconti o arrotondamenti se non da noi autorizzati. Per nessun motivo e a nessun titolo il Committente può differire i pagamenti oltre le scadenze pattuite, particolarmente in seguito a ritardi nella consegna di materiali o a contestazioni di qualsiasi natura. Sui pagamenti pervenuti con un ritardo superiore ai 10 giorni solari dalla data di scadenza pattuita verranno addebitati gli interessi passivi calcolati al vigente tasso di rifinanziamento della BCE aumentato di 7 unità, come da D.L. n. 231 del 09/10/2002. In caso di RI.BA. insoluta si procederà inoltre, senza ulteriore avviso, all’emissione di una nota debito pari a 10,00 € quale rimborso spese. In ogni caso resta inteso che conserviamo la proprietà sui materiali forniti fino al totale pagamento degli stessi.
CONTESTAZIONITrascorsi otto giorni dal ricevimento della merce non si accettano reclami di qualsiasi natura. In caso di contestazioni si stabilisce la competenza esclusiva dell’Autorità Giudiziaria di Milano. Le eventuali contestazioni non dispensano il Committente dall’osservare le condizioni di pagamento pattuite e non implicano alcun prolungamento dei termini di pagamento convenuti. Per eventuali sostituzioni di parti difettose e/o danneggiate, si fa riferimento alla procedura Plexiform.
Plexiform 353
GENERAL SALE CONDITIONSINTRODUCTIONPurchase orders are considered accepted at the currently ruling sales prices and conditions. In the event that a price list is amended, the purchaser shall retain the right to cancel any purchase order by requesting the same in writing, by registered mail, fax or email within 48 hours from the moment of receipt of notice of the said variations or amendments. All purchase orders (even if sent via a Sales Agent) shall be considered as accepted upon our confirmation of the whole or part thereof.
TECHNICAL DATAPurchases are wholly responsible for ensuring that their choice of item is correct with regard to the desired features and usage. We advise that all items should be installed and used in conformity and within the limits prescribed in the items technical features observing D.P.R.547 dated 27/04/1995 and D.L. 81/08 dated 09/04/2008 and any subsequent variations and integrations. Due to continual product development and improvement we reserve the right to vary our product offers without prior notification. Drawings and pictures remain our intellectual property and must not be reproduced, copied or lent without our permission.
PRICESAll prices quoted in the price list are understood as ex works (carriage costs not included) unless otherwise agreed upon.
FORWARDINGCarriage and shipment of goods by whatever means of transport or shipping shall always be considered at the risk and responsibility of the purchaser and the company will not be liable for any damages, faults, theft or interference with any itembduring the transportation process.
DELIVERYDelivery times quoted at the time of order acceptance are merely indicative and not binding and the company will have no obligation or entertain third party claims for any delay, damage whether direct or indirect due to any delays in delivery, whether this be as a result of suspension of delivery, in part or in full. In cases of payment in advance, delivery time shall not commence until payment in full has been received by the company. It should be noted by the purchaser that delivery times will be extended if:a) payment is not received within the designated time periodb) the purchaser does not disclose all information required to proceed with the orderc) problems arise outside of our control with third party suppliers to the company.
RETURN OF GOODSNo goods may be returned by the purchaser or accepted by the company unless otherwise agreed in writing. For specially executed products the company reserves the right not to accept any return of such items.
PAYMENTThe payment of goods shall be effected, as confirmed in our acceptance document, at our factory and the method by which payment is made shall remain at the risk and responsibility of the purchaser. No discounts or deductions will be accepted without the express permission of the company.
COMPLAINTS AND CLAIMSAny complaint or claim arising out of the supply of goods by the company to the purchaser must be received by the company within 8 days from the date of receipt of goods by the purchaser and any failure to comply will mean that the company riserve the right to decline acceptance of such complaints or claims. In the case of a justifiable complaint which cannot be resolved by the two parties then arbitration will be sought at the Tribunal of Milan. Any pending claim does not absolve the purchaser from complying with the terms of payment as agreed at the time of order nor will any extension of payment terms be allowed.
354 Plexiform
COPYRIGHT By PLEXIFORMÈ VIETATA LA RIPRODUZIONE ANCHE PARZIALE DEL CATALOGOANY TYPE OF REPRODUCTION IS STRICTLY FORBIDDEN
Art Direction Nicola Pallotta - Dario Rossini
Prepress Nicola Pallotta
Post production Nicola Pallotta - Lorenzo Cervo
Print G. Canale & C. S.p.A. - Borgaro Torinese (TO)
Finished printing Marzo - March 2015
Plexiform srl si riserva la facoltà di modificare le caratteristiche tecniche dei prodotti presenti all’interno di questo catalogo, in qualunque momento senza preavviso.Plexiform srl reserves the right to change the technical specifications of any product illustrated inside this catalogue, at any time and without prior warning.
Certificato PEFC
Questo prodottoè realizzato conmateria primada foreste gestite inmaniera sostenibile eda fonti controllate
www.pefc.itPEFC/18-31-330