Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
1
1. INTRODUCTION
1.1 INTRODUCTION
- EASYKEY is the easy tool for electronic key programming. It has manufactured by DTDAuto Technology Center, Institute of Physics, Vietnam Academy of Science and Technology since 2019. It will save time and money when you solve problems relate to lost key situations and adding new key. - EASYKEY is a useful product for: + Customers are electronic key locksmith + Customers are repairer with low financial level + Support many automatic features for normal smart key repairer - Used for vehicles that equipped smart key system of HONDA, YAMAHA, PIAGGIO, VESPA, SUZUKI brands.
HONDA: AIR BLADE 125, CLICK-i 125, LEAD 125, PCX 2015-2019, PCX Hybrid, FORZA, SH MODE, SH 125/150 ESP, SH 300i ABS, SCOOPY-i ESP, VARIO 150, VARIO ESP, X-ADV, SUPER CUB... YAMAHA: TMAX, XMAX, NMAX, SMAX, AEROX, LEXI, FREEGO S, LATTE, GRAND Hybrid, JANUS Limited, JANUS Premium, NVX 155 ABS, NVX Deluxe, NVX Doxou, QBIX...
PIAGGIO: BEVERLY 125/300/350 MIUG3, FLY 125/150 MIUG3, FLY 125/150 3V MIUG3, LIBERTY 125/150 MIUG3, LIBERTY 125/150 3V MIUG3, LIBERTY 125/150 3V PGN04, LIBERTY 125/150 3V PGT01, LIBERTY 125/150 3V PGS01, LYBERTY ABS PGS06, LIBERTY 125/150 AC19I/20I, LIBERTY 125/150 AC191/201, X10 125/350 MIUG3, MEDLEY* 125/150 PGQ16, FLY 125/150 AC19I/20I…
VESPA: 946 125/150 3V MIUG3, GTS 125/150/300 MIUG3, LT 125/150 3V MIUG3, LX 125/150 MIUG3, LX 125/150 3V MIUG3, SPRINT 125/150 3V PGS02, LX 125/150 AC19I/AC20I, LX
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
2
125/150 AC19I/AC20I, S 125/150 3V MIUG3, SPRINT 125/150 3V PGN04, SPRINT 125/150 3V PGT01, PRIMAVERA 125/150 MIUG3, PRIMAVERA 125/150 PGN04, S125/150 MIUG3, GTS 125/150 MIUG2...
SUZUKI: GSX-R150
Note: The function with an asterisk (*) will appear on the next version
Standard package image
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
3
1.3 OPTIONS & FUNCTION
OPTIONS FUNCTION
EASYKEY 4.0 STD
(standard version)
- Read all KEYID# and ECMID from vehicle SCU - Program all of case about Smart Key System: ON VEHICLE, ON SIMULATOR & Fast automatic programming direct to SCU & ECM (without vehicles) as following: + Register more FOB# for all of cases + Register FOB# when lost all of the FOB# + Delete KEYID in SCU memory + Synchronize SCU & ECM for all of cases + Inactivate FOB# code in SCU when lost FOB# + Check FOB# & SCU + Display status of KEY (ON/OFF) + Display SCU information - Restore SCU data from sample data for HONDA (this function used to repair software inside SCU when SCU data is fault) - Copy data from source SCU to destination SCU for all motorbikes that have Smart key system: HONDA, YAMAHA, SUZUKI (This function used to repair, swap SCU when have SCU hardware/software fault)
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
4
- Quick sync SCU & ECM (without FOB) for HONDA: SH, PCX, X-ADV... and equivalent vehicles
- A gift MOTODATA software used to lookup motorbikes repair data on computer or mobile for 01 year (Note: If you want to continue using for the next time then pay renewal fee. Renewal fee is 15 $US for next year)
EASYKEY 4.0 TMA
(Add YAMAHA TMAX)
- Include all functions of 4.0 STD unit - Add key programming for o xe YAMAHA TMAX + Register more FOB + Register FOB# when lost all of the FOB# + Inactivate/Activate FOB# in SCU + Read KEYID# in SCU + Delete KEYID# in SCU memory + Copy SCU data + Check KEYID + Check FOB & SCU Note: 4.0 STD version is not supported YAMAHA TMAX, If you want to use this function then you upgrade from 4.0 STD version with additional fee
- A gift MOTODATA software used to lookup motorbikes repair data on computer or mobile for 01 year (Note: If you want to continue using for the next time then pay renewal fee. Renewal fee is 15 $US for next year)
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
5
EXTENSION ACCESSORY
(MOTOBOX Optional)
Support extender function as following: - Simulate INPUT/ OUTPUT signals of CM for testing, diagnostic and repairing ECU & ODO hardware - ODO value correction with new solutions for most common motorcycles - Reprogramming & upgrade ECM's firmware for HONDA, PIAGGIO/VESPA vehicles - Support for all HONDA, YAMAHA, PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs), SYM, SUZUKI, KYMCO PGM-FI/FI motorbikes
1.4 DESCRIPTION OF FUNCTION KEYPADS
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
6
No COMPONENT FUNCTION DESCRIPTION
1 LCD Main display Display all information for the using
2 “Enter/OK” button Perform a command menu follow selection
3 “Shift Up” button Shift cursor to Up to select function
4 “Shift Down” button Shift cursor to Down to select function
5 “Shift Left” button Shift cursor to Left to enter KEY ID
6 “Shift Right” button Shift cursor to Right to enter KEY ID
7 “Exit/Cancel” button Exit or cancel the function
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
7
2. PROGRAM SMART KEY
2.1 PROGRAM SCU FOR HONDA, YAMAHA, SUZUKI
This function used for automatic registration steps directly with SCU that need not connect SCU to vehicle. When you use this function, you need choose the right cable for vehicle.
BRANDS MODELS CABLE TYPE
PCX 2015-2019, PCX Hybrid, SH MODE, SH 125 ESP, SH 150 ESP, SH 300i ABS, SCOOPY-I ESP, X-ADV, SUPER CUP
EK07-SP02
AIR BLADE 125, CLICK-I 125, LEAD 125, VARIO 150, VISION ESP
EK07-LV02
FREEGO S, LATTE, GRANDE Hybrid, JANUS limited, JANUS premium, NVX 155 ABS, NVX deluxe, NVX doxou, NVX, Qbix, X-Max
EK07-YS02
TMAX EK07-TM02
GSX R150 EK07-YS02
Step 1: Select “Programming smartkey” from main screen then press “Select/OK”, the screen display list of manufacturers:
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
8
Step 2: Select “Honda smart key” and press “Select/OK” button, the screen display list of models. Use “Shift Down” button to select model (example: PCX hybrid), then select “Perform w/o vehicle”:
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
9
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
10
Note: Select cable as instruction on screen (example: HONDA EK07-SH02 cable) then press “Select/OK”, the screen display function table:
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
11
Step 3: Use “Shift Down” button to select function (example: Lost all of the keys) then press “Select/OK” button. You view and execute as instructions on the screen until the end result screen shows.
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
12
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
13
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
14
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
15
2.2 READ KEYID/ECM ID FROM SCU FOR HONDA, YAMAHA, SUZUKI
This function used to read KEYID/ECMID từ SCU for HONDA, YAMAHA, SUZUKI *Important note: - Check that the wire and footprint soldering is correct according
to the guide diagram at “ID SMART KEY” iterm of MOTODATA
software.
- Good soldering contact, good connector, not wrong, short-
circuits with other points by welding.
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
16
WIRING DIAGRAM FOR HONDA SH, PCX
Ple
ase v
iew
connection d
iagra
m o
n M
OTO
DATA s
oft
ware
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
17
WIRING DIAGRAM FOR HONDA LEAD, AIR BLADE
Ple
ase v
iew
connection d
iagra
m o
n M
OTO
DATA s
oft
ware
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
18
WIRING DIAGRAM FOR CLICK, VARIO
Ple
ase v
iew
connection d
iagra
m o
n M
OTO
DATA s
oft
ware
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
19
WIRING DIAGRAM FOR YAMAHA, SUZUKI
Ple
ase v
iew
connection d
iagra
m o
n M
OTO
DATA s
oft
ware
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
20
Step 1: Use “Shift Down” button to select “Read KEYID# from SCU” function, then press “Select/OK” button:
Step 2: You choose right cable type (example: EK07-SP01) and connect EASYKEY to SCU as diagram wiring:
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
21
Step 3: Press “Select/OK” button to read KEYID and ECMID:
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
22
If reading is successful then the screen display KEYID/ECMID information:
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
23
If reading is unsuccessful then please check connection, wire or SCU then do it again.
2.3 FIND ECMID FROM ECM
Please wait update for the next version
2.4 DELETE KEYID IN SCU
This function used to dekete KEYID# in SCU when SCU full registered 04 FOBs.
From function table use “Shift Down” button to select “Delete KEYID in SCU” function, then press “Select/OK” button:
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
24
You view and execute as instructions on the screen until the end result screen shows.
2.5 RESTORE DATA SCU
From function table use “Shift Down” button to select “Restore data SCU” function, then press “Select/OK” button:
You view and execute as instructions on the screen until the end result screen shows.
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
25
2.6 COPY DATA FROM RESOURCE SCU TO DESTINATION SCU
From function table use “Shift Down” button to select “Copy data SCU -> SCU” function, then press “Select/OK” button:
You view and execute as instructions on the screen until the end result screen shows.
2.7 PROGRAM IMMOBILIZER FOR PIAGGIO/VESPA
This function used for key programming of PIAGGIO/ VESPA that have IC types are: AC13I, AC191, AC19I, AC20I, AC21I, AC23I, AC24I, AC25I, AC27I, AC32I, AC5I, AC8I, ACI600, AC601, ACI602, ACI603, ACI604, ACI605, ACI606, ACII, AC2I, AC5I, AC8I, AC13I and ECM types are: MIU1, MIU2, MIU G3/RIU1, MIU4, PGU09, PGN04/PGS02/PGT01 in the following cases: - Read IDKEY - Register slave key when have master key - Register key when lost all keys (master and slave key) - Replace ECM - Unsubscribe key and reset immobilizer
Note: Use “EK07-DLC” cable for programming key of PIAGGIO/VESPA
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
26
Step 1: From “KEY PROGRAMMING” screen, you select vehicle (example: Piaggio Beverly)
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
27
Step 2: Press “Select/OK” button, the screen display function table
Use “Shift Down” button to select function that you want to operate. You view and execute as instructions on the screen until the end result screen shows.
3. ADJUST ODOMETER
This function used to adjust ODO value for HONDA, YAMAHA, PIAGGIO, VESPA, SUZUKI. You need connect EASYKEY to MOTOBOX for this function. Step 1: Use “Shift/Down” to select “Adjust Odometer” then press “Select/OK”
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
28
Step 2: Select model to adjust odometer (example: SH 150ESP 2017-2019) then press “Select/OK” button
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
29
Step 3: Use “EK07-LINK” cable to connect EASYKEY to MOTOBOX then press “Select/OK” button. If connection is succesuful then the screen display as below:
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
30
Connect ODO cable or CHIP board to MOTOBOX. Press “Select/OK” button to continue. You view and execute as instructions on the screen.
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
31
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
32
The screen display IC type of odometer (ex: IC type is 93C66). You must remove dashboard, determine position of weld points on circuit board as guide image at MOTODATA software:
Step 4: Press “Select/OK” button, the screen display functions:
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
33
- When you check odometer, if you see clockwise do not change or meter can be fail, you need use “Write original data” function to repair data in odometer - When you replace a new dashboard or odometer is fault that you need edit new ODO value equivalent with ODO value to follow motorcycle using time and maintenance time you need to “Adjust Odometer” function. Use “Shift Up/Down” button to select function that you want to operate. You view and execute as instructions on the screen until the end result screen shows.
4. REPROGRAM FIRWARE
This function used to program or upgrade software inside MCU (firmware) of HONDA, PIAGGIO, VESPA. Step 1: - Use “EK07-LINK” to connect EASYKEY with MOTOBOX - Use “EK07-DLC” to connect MOTOBOX with DLC connector
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
34
Step 2: Use “Shift Down” to select “Reprogram firmware”
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
35
Use “Shift Down” to select model (ex: Piaggio Liberty)
Step 3: Press “Select/OK” button. You view and execute as instructions on the screen until the end result screen shows.
5. SIMULATE SIGNAL
This function used to simulate INPUT and OUTPUT signals of ECM. Step 1: Use “Shift Down” to select “Simulate ECU signals” then press “Select/OK” button.
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
36
Step 2: Use “EK07-LINK” cable to connect EASYKEY with MOTOBOX as below:
After connection has completed, press “Select/OK” button to continue. Step 3: The screen displays simulation signals. Press “Shift Up/ Down” button to view list of signals, you select signal type that you need simulate then press “Select/ OK” button. Example: VSS signal
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
37
Step 4: Use “Shifft Up” or “Shifft Down” to increase or decrease value of electric pulse signal.
Step 5: Use the simulation signals to generate at output of MOTOBOX for diagnosis and ECU repair. You view below image:
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
38
6. UPDATE, UPGRADE EASYKEY
6.1 REPAIR
1. Internet connection computer 2. Connect EASYKEY to computer via EK07-UPDATE cable
6.2 PERFROM STEPS
1. Download and install “ULTRAVIEWER” software
GND
IGPLS, INJ (20VDC/20A)
CKP, VSS (12VDC/0,1A)
MAP, TP, TW, TA (0.2÷5VDC/0,5A)
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
39
2. From function table you use “Shift Down” button to select “EASYKEY information” then press “Select/OK” button, the screen display information of EASYKEY:
P/N: Product number of EASYKEY
Version 4.0
DTDAUTO TECHNOLOGY TEAM – EDITED 05/06/2020 www.dtdauto.com
40
3. Contact with DTDAuto (email: [email protected]) to request update/upgrade support. Please send “Product number” of EASYKEY and “Your ID”, “Password” of Ultraviewer to DTDAuto. 4. Do not use mouse and keyboard. Wait for DTDAuto technician to perform. It will take about 15 to 30 minutes.
INDEX
1. INTRODUCTION ................................................................................ 1 1.1 INTRODUCTION ............................................................................. 1 1.3 OPTIONS & FUNCTION .................................................................... 3 1.4 DESCRIPTION OF FUNCTION KEYPADS ............................................. 5
2. PROGRAM SMART KEY ...................................................................... 7 2.1 PROGRAM SCU FOR HONDA, YAMAHA, SUZUKI .................................. 7 2.2 READ KEYID/ECM ID FROM SCU FOR HONDA, YAMAHA, SUZUKI ........ 15 2.3 FIND ECMID FROM ECM ................................................................ 23 2.4 DELETE KEYID IN SCU .................................................................. 23 2.5 RESTORE DATA SCU ..................................................................... 24 2.6 COPY DATA FROM RESOURCE SCU TO DESTINATION SCU ............... 25 2.7 PROGRAM IMMOBILIZER FOR PIAGGIO/VESPA ................................ 25
3. ADJUST ODOMETER ........................................................................ 27 4. REPROGRAM FIRWARE ................................................................... 33 5. SIMULATE SIGNAL .......................................................................... 35 6. UPDATE, UPGRADE EASYKEY .......................................................... 38
6.1 REPAIR ....................................................................................... 38 6.2 PERFROM STEPS .......................................................................... 38
___________________________________________
DTDAUTO TECHNOLOGY CENTER
Phone: (+84)913.555.416, (+84)913.001.792
Address 1: No. D1, 93 Alley, Cau Giay st., Hanoi, Vietnam
Address 2: Floor 3, BuildingA25, Institute of Physics / Institute of Science and Technology of Vietnam, No. 18 Hoang Quoc Viet, Hanoi, Vietnam
Email: [email protected]
Website: http://www.dtdauto.com; http://www.cartools.com.vn; http://www.cartraining.com.vn