1/4/2014 Scale up well logs - petrofaq http://petrofaq.org/wiki/Scale_up_well_logs 1/1 Scale up well logs From petrofaq Scale up (or blocking ) well logs is the process of assigning well log data to grid cells. In the model each grid cell has a single value for each property (porosity, permeability, etc). Because the grid cells are much larger than the well logs density, well log data must be scaled up before it assigned to the grid cells. Retrieved from "http://petrofaq.org/w/index.php?title=Scale_up_well_logs&oldid=3006" Categories: Glossary Reservoir Modeling&Simulation This page was last modified on 22 April 2013, at 11:23. This page has been accessed 188 times.
Scale up (or blocking ) well logs is the process of assigning
well log data to grid cells.
In the model each grid cell has a single value for each property
(porosity, permeability, etc). Because the grid cellsare much
larger than the well logs density, well log data must be scaled up
before it assigned to the grid cells.
Retrieved from
"http://petrofaq.org/w/index.php?title=Scale_up_well_logs&oldid=3006"
