Embed Size (px)
Citation preview
5/13/2018 Scada Based Industrial Monitoring and Control System - slidepdf.com
http://slidepdf.com/reader/full/scada-based-industrial-monitoring-and-control-system 1/3
SCADA BASED INDUSTRIAL MONITORING AND
CONTROL SYSTEM
Abstract:
In numerous industrial fields it is necessary to record the parameter variations to which a
product is subjected, in cases where, depending on circumstances, one or more variations
or the overstepping of predetermined Parameter could make the product unsuitable for
subsequent use. Such device has many applications. One crucial application is to monitor
and control a process where fluids have to be handles at certain predefined conditions like
temperature and pressure control is necessary.
The project design consists of a microcontroller which is connected with a Parametrs
sensing devices. The data collected from the sensors are given to the signal conditioning
system for proper modification of the signal so that the controller can process the data. The
collected information is then passed on to the computer which will be interface to the
microcontroller. If the measured parameters Goes above the set point or critical values,
then proper action will be taken by the control unit, and the parameters data will be
recorded in EEPROM
Block Diagram:
5/13/2018 Scada Based Industrial Monitoring and Control System - slidepdf.com
http://slidepdf.com/reader/full/scada-based-industrial-monitoring-and-control-system 2/3
Hardware Required:
Microcontroller Unit
Sensor unit[P]
CAN interface Display
Buzzer
Controlling or switching unit[R]
Software Required:
CO
N
T
R O
L
LE
R
C
O
NT
R
OL
L
ER
C
O
NT
R
OL
L
ER
R
R
R
P
P
P
R
R
R
P
P
P
Display
CAN
Buzzer
EEPROM
KeyPad
5/13/2018 Scada Based Industrial Monitoring and Control System - slidepdf.com
http://slidepdf.com/reader/full/scada-based-industrial-monitoring-and-control-system 3/3
Embedded C
Keil C compiler
