SC-MS-051 Hydraulic Bollard CP275-750

Embed Size (px)

Citation preview

  • 7/30/2019 SC-MS-051 Hydraulic Bollard CP275-750

    1/2

    Gunnebo Middle East FZE Dubai Airport Free

    Zone

    P.O. Box 54435

    Dubai

    United Arab Emirates

    Phone + 971 4 7017837

    Fax + 971 4 7017835

    Email : [email protected]

    www.gunnebo.com

    1

    Blocking BollardsType: CP 275-750

    Bollards Diameter: 275 mm

    Blocking Height: 750 mm

    Installation Depth: 1290 mm

    Impact load at 400 mmimpact height:

    206 kN (Stainless Steel) proven by static calculation.

    Distance between bollards: Max. 1,5 m centre-centre

    Blocking Element: Stainless Steel.

    Bollards Design: With standpipe

  • 7/30/2019 SC-MS-051 Hydraulic Bollard CP275-750

    2/2

    Gunnebo Middle East FZE Dubai Airport Free

    Zone

    P.O. Box 54435

    Dubai

    United Arab Emirates

    Phone + 971 4 7017837

    Fax + 971 4 7017835

    Email : [email protected]

    www.gunnebo.com

    2

    Wheel load: 100 kN wheel load according to SLW-60-DIN 1072

    Lightening: Optional

    Raising Time : Single: Approx: 4 sec./Double: Aprrox. 8 Sec

    Lowering Time : Single: Aprrox: 3 sec./ Double: Aprrox: 3 sec

    Hydraulic aggregate : In Separate drive cabinet

    Blocking Element : Cylindrical: Diameter: 275 mm,Drive Cabinet: For outdoor installation

    Locking mechanism fordrive cabinet:

    Comfort handle with profile cylinder

    Motor: 4.0 kW

    Hydraulic hose length 25 m

    Remote operation: Bollard(s) to remain in raised position upon power failureThe bollard(s) can be lowered manually by operatingthe ball cock valveAccumulator for remote operation, three movementsactivation of solenoid valves via rechargeable batterypackHand pump for manual operation during power failure

    Corrosion protection: Multiple layers of zinc structure basedTRI-PROTECT plastic coating

    Blocking element Dark grey , Optional Stainless steelCover standpipe Coated RAL 7016 (anthracite grey)Stand pipe: Hot dip galvanised

    Drive cabinet RAL 7035 (light grey)

    Location of control board Control board in drive cabinet

    Type of hydraulic oil: Mineral oil HLP 22

    Drainage: A connection point of a 100 mm diameter hollow pipe atthe bottom of the standpipe