sAW BlADes - Emerge2 Digital

1201

sAW BlADeshigh performAnCe super sAwzAll® blAdesMatrixIIhighspeedsteelteethwith8%cobalt.Toughbi-metaldesignforthefastestcutting,longestbladelifeavailable.1/2"universaltang.

Wood Cutting Blade

Wood, Nail embedded Wood and Demolition

Plaster Cutting Blade

Metal Cutting Blade

All Purpose Blade

tungsten Carbide Blade

ice HardenedtM sawzall® Blade for metal

ice HardenedtM The torch® sawzall® Blade for metal

Dimensions Pack of 5 Price L" x W" x Thick" TPI Recommended for Cutting Model No. /Each

wood cutting bLades 6 x 3/4 x 0.050 6 Very fast cutting nail TW181 9 x 3/4 x 0.050 6 embedded wood and TW182 12 x 3/4 x 0.050 6 general roughing in TW183 wood, naiL eMbedded wood & deMoLition 6 x 1.0 x 0.062 5 Plunge cutting TW185 9 x 1.0 x 0.062 5 Demolition work TW186 12 x 1.0 x 0.062 5 Long demolition blade TW187 pLaster cutting bLade 5 x 3/4 x 0.050 6 Cuts forward and backward stroke TW188 MetaL cutting bLades 6 x 3/4 x 0.035 14 Metal 3/16" thru 1/4" TW189 6 x 3/4 x 0.035 18 Metal 1/8" thru 3/16" TW190 9 x 3/4 x 0.035 18 Metal 1/8" thru 3/16" TW191 6 x 3/4 x 0.035 24 Metal thinner than 1/8" TW192 4 x 3/4 x 0.035 14 Metal 3/16" thru 1/4" TE533 9 x 3/4 x 0.035 14 Metal 3/16" thru 1/4" TE534 12 x 3/4 x 0.035 18 Metal 1/8" thru 3/16" TE535 aLL purpose bLades 6 x 3/4 x 0.050 8 1/2 All Woods, Nail Embedded TW193 8 x 3/4 x 0.050 8 1/2 Composition Material, Plastic TW194 12 x 3/4 x 0.050 8 1/2 Non-Ferrous Metals, Cast Iron TW195 ice hardenedtM the torch® sawzaLL® bLade for MetaL 6 x 1 x 0.042 10 TBO316 6 x 1 x 0.042 14 TBO320 6 x 1 x 0.042 18 TBO324 9 x 1 x 0.042 14 TBO336 9 x 1 x 0.042 18 TBO340 ice hardenedtM sawzaLL® bLade for MetaL 6 x 3/4 x 0.042 14 TBO318 6 x 3/4 x 0.042 18 TBO322 6 x 3/4 x 0.042 24 TBO326 6 x 3/4 x 0.042 8-12 TBO328 6 x 3/4 x 0.042 8-12 TBO330 9 x 3/4 x 0.042 14 TBO334 9 x 3/4 x 0.042 18 TBO338

diAmond griT The TorChTm sAwzAll® blAdes Features and benefits:• D6Asteelbody,durable1"tallprofileforstraighterandcleanercuts• Featuringindustrialdiamondgritembeddedinhighstrengthnickel• Bladeslastupto30xlongerandcut2xfasterthantraditionalcarbidegritblades

iCe harDeneDTm Sawzall® blaDe for meTal• Cryogenicallytreatedtominimizesoftmetal(austenite)

andcreatemorehardmetal(martensite)forup to50%longerlifethanstandardblades

• Combinationofreliefanglesformsaradiusonthebackofthetooththatreducesstressbuild-upandextendsbladelife

• Precisionformingprocesscreatessharperteethforfastcutting• MatrixIIbi-metalteethforgreaterdurability

iCe harDeneDTm The TorCh® Sawzall® blaDe for meTal• AllthefeaturesofIceHardenedTMSawzall®bladeformetal,plus:• Precisionformingprocesscreatessharperteethforfastcutting• Athicker,morerigidbladebodyresistsfracturing

andbendingformaximumdurability• The1"tallbladebodyreducesblade

twistingforstraighter,moreaccuratecuts

Dimensions Type Model Price L" x W" x Thick" Grit Recommended for Cutting No. /Each

6 x 1 x 0.042 Diamond coarse Cast iron, hard tile (grade 5), ceramic tile, plaster, TBO299 9 x 1 x 0.042 Diamond coarse masonry, brick, fibreglass and other abrasive materials TBO300

Dimensions Type Pack of 3 Price L" x W" x Thick" Grit Recommended for Cutting Model No. /Each

tungsten carbide bLades 6 x 3/4 x 0.030 Coarse fibreglass, ceramic tile, stone brick, TW197 9 x 3/4 x 0.039 Coarse plaster and marble TE536

MAteriAl HANDliNg &

storAge

JANitoriAl & MAiNteNANCe

sAFety equiPMeNt & suPPlies

WelDiNg & MetAlWorkiNg

tools & equiPMeNt

sHiPPiNg & PACkAgiNg

iNstruMeNts, sCAles &

eleCtriCAl

oFFiCe ProDuCts

1202

sAW BlADeswhAT you should know AbouT CirCulAr sAw blAdesToothdesignisthedeterminingfactorindecidingwhichbladeisbestforwhichindustrialapplication.

Here'saquickoverviewofhowsubtlechangesinbevel,gulletandkerfaffectcuttingperformance.

grinDTherearemanytypesofgrinds, butthefivebasiconesare:

Flattopgrind(FTG)-bestforripping.

Alternatetopbevel(ATB)-forcrosscutting,cut-offandtrimming.

Triplechipgrind(TCG)-perfect forhard,abrasivematerialslike non-ferrousmetals,hardwoods and plastics.

Multi-purposecarbidetipped(MCT) orrippingandcrosscutting,mitre.

Tri-grind(TRI)-combinationgrind.

beVelTeethcanhaveasinglebevel,twobevelsornobevelatall.Typesofbevelscanalternatefromtoothtotoothonagivenblade.Thebeveliswhatgivesthebladeitsspecificcuttingpattern.

gulleTThis is the space between teeth that clears the workpieceofchipsafterthecut.Thedeeperthegullet,themoreefficientlychipsarecleared.

kerfThisisthefaceofthetooth,wheretheactualcuttingtakesplace.Thepatternofalternatingkerfs,knownasthegrind,decideswhatapplicationsabladeisbestfor.

kerf

Face

gullet

Bevel

Direction of cut

top

TCSFeatureFreud'snewestandmostresilientPermashield®coating.ThisbladenowcombinesFreud'shighestqualitybladewithitshighestqualitycoating.TheTCScoatinghelpsreducebladedistortingheatandmakescuttingabreeze.

geNerAl PurPose • Crosscutandcutoffofhardandsoftwoods

sliDiNg CoMPouND Miter BlADes• Easyfastcutting

lAMiNAte & CHiPBoArD • Cutsdenseabrasiveman-madematerials

CrossCut & FiNisHiNg• Ultrasmoothcrosscutandmitres

riPPiNg• Ripshardandsoftwoods

premier fuSion general purpoSe Saw blaDeS• Ripswoods,crosscutswood,

plywood,laminate

indusTriAl blAdes

general purpoSe Saw blaDeS• Forcrosscuttingthickhardwoodsandsoftwoods

(3/4"to31/2")andthinnerstockmaterial(1/4"to1")• Anti-vibrationdesign,SilverIceTM coating

Model Mfg. Blade No. of Hook Price No. No. Dia." Arbor" Teeth Kerf" Degrees Grind /Each

TT639 LU72M014 14 1 54 0.138 13 ATB

Model Mfg. Blade No. of Hook Price No. No. Dia." Arbor" Teeth Kerf" Grind /Each

TBO352 P408 8 5/8 34 Hi 0.126 ATB TBO353 P410 10 5/8 40 Hi 0.126 ATB TBO354 P412 12 1 48 Hi 0.126 ATB


TT815 LU84R008 8 5/8 40 0.126 10 MCT TT817 LU84R010 10 5/8 50 0.126 10 MCT TT818 LU84R012 12 1 60 0.126 10 MCT


TT833 LU91R008 8 5/8 48 0.090 -5 ATB TT834 LU91R010 10 5/8 60 0.090 -5 TCG


TT809 LM72R008 8 5/8 24 0.126 20 FTG TT810 LM72R010 10 5/8 24 0.126 20 FTG TT811 LM72R012 12 1 30 0.169 20 FTG


TT821 LU85R008 8 5/8 64 0.116 10 ATB TT823 LU85R010 10 5/8 80 0.116 10 ATB TT824 LU85R012 12 1 96 0.116 10 ATB


TT836 LU98R008 8 5/8 64 0.126 -10 TCG TT838 LU98R010 10 5/8 80 0.126 -10 TCG TT839 LU98R012 12 1 96 0.126 -10 TCG

heaVy-DuTy glue line ripping blaDeS• Ripswood,crosscutswood,

chipboard,plywood,laminate


TBO357 LM74R010 10 5/8 30 0.118 TCG TBO358 LM74R012 12 1 40 0.118 TCG TBO359 LM74R014 14 1 44 0.138 TCG

miTre CroSSCuT • Crosscutandmitreofhardandsoftwoods


TT684 LU73M010 10 5/8 60 0.126 10 ATB TT685 LU73M012 12 1 72 0.126 10 ATB TT686 LU73M014 14 1 84 0.138 10 ATB

Double SiDeD laminaTe/melamine• Ripswood,crosscutswood,

chipboard,plywood,melamine,laminate


TBO360 LM97R008 8 5/8 64 0.126 TCG TBO361 LM97R010 10 5/8 80 0.126 TCG TBO362 LM97R012 12 1 96 0.126 TCG TBO363 LM97R014 14 1 108 0.138 TCG

oFFiCe ProDuCts


eleCtriCAl


tools & equiPMeNt




MAteriAl HANDliNg &

storAge

1203

sAW BlADes

Diablo® Saw blaDeS• Thinkerf,idealforportableandlowpoweredsaws• Perma-Shield®coating,keepstheblades

resistant to gumming and corrosion• Laser-cutstabilizerventsreduces

vibrationandheatbuiltup

Model Mfg. Blade No. of Hook Price No. No. Dia." Arbor" Teeth Grind /Each

TV663 TK303 7 1/4 5/8 40 FTG TV664 TK304 8 1/4 5/8 40 FTG TV665 TK306 10 5/8 40 FTG

ConTrACTor sAw blAdes

SawS for non-ferrouS meTal• Materialmustbeclampedfirmlytothetable

on both sides during cutting operation and theuseofcoolantisveryimportant

grooVing Saw blaDeS for aluminum• Usedformilling,cleanupand

groovingofaluminumwelds and cutting out welding tracks

• Usedwithhandheldgrinder

meTal CuTTing Saw blaDe• Forcuttingferrousmetalsupto25HRC,

aluminum,woodandcompositematerial

Model Mfg Blade No. of Price No. No. Dia." Arbor" Teeth Kerf /Each

TBO728 8-40 MET 8 5/8 40 0.086 TBO729 10-48 MET 10 1 48 0.094 TRW236 12-60 MET 12 1 60 0.094 TRW240 12-80 MET 12 1 80 0.094 TBO730 14-90 MET 14 1 90 0.1


TRW242 6 1/4-48 N/F 6 1/4 5/8 48 0.113 -6 TCG TRW244 7 1/4-58 N/F 7 1/4 5/8 58 0.113 -6 TCG TRW114 8-48 N/F 8 5/8 48 0.113 -6 TCG TRW245 8-64 N/F 8 5/8 64 0.113 -6 TCG TRW117 10-80 N/F 10 5/8 80 0.126 -6 TCG TRW153 10-100 N/F 10 5/8 100 0.126 -6 TCG TRW119 12-96 N/F 12 1 96 0.126 -6 TCG TRW120 14-84 N/F 14 1 84 0.126 -6 TCG TRW121 14-108 N/F 14 1 108 0.126 -6 TCG TRW163 15-100 N/F 15 1 100 0.126 -6 TCG

Model Mfg. Blade Dia. No. of Price No. No. mm Arbor" Teeth Kerf" /Each

TRW263 4-24 N/F 100 5/8 24 0.154 TRW264 4-30 N/F 100 5/8 30 0.154 TRW265 4 1/2-24 N/F 115 5/8 24 0.154 TRW266 4 1/2-30 N/F 115 5/8 30 0.154

CroSSCuT & plywooD • Smoothcrosscutandplywood

Combination• Forrippingandcrosscutting


TDX905 D1050X 10 5/8 50 ATB

Finishing• Forripping,crosscutting,decking,

fencingandplywood


TDX992 D0740A 7 1/4 5/8 40 ATB TEX006 D0840X 8 1/2 5/8 40 ATB

Fine Finishing• Forcrosscuttingoak,pine,melamine,

plywoodandmolding,verysmoothfinish


TEX005 D0860S 8 1/2 5/8 60 ATB TDX909 D1060S 10 5/8 60 ATB TDX931 D1280X 12 1 80 ATB

general Purpose• Forcuttingoak,pine,plywood,

pressure treated lumber and beams


TDX901 D1040X 10 5/8 40 ATB TDX926 D1244X 12 1 44 ATB

GlovesTraffic conTrol

Spill ControlEyEwEar

Safety

MAteriAl HANDliNg &

storAge




tools & equiPMeNt



eleCtriCAl

oFFiCe ProDuCts

Documents

sAW BlADes - Emerge2 Digital