sation formation User Manual Notice d'utili‐ Benutzerin ... · sockets. • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug

SI1F7955B

User Manual

Hob

Notice d'utili‐sation

Table decuisson

Benutzerin‐formation

Kochfeld

CONTENTSSafety information 2Safety instructions 4Product description 6Daily use 8Flexible induction cooking area 12Hints and tips 15

Care and cleaning 18Troubleshooting 18Installation 21Technical data 22Energy efficiency 23

Subject to change without notice.

SAFETY INFORMATIONBefore the installation and use of the appliance, carefullyread the supplied instructions. The manufacturer is notresponsible for any injuries or damages that are the result ofincorrect installation or usage. Always keep the instructionsin a safe and accessible location for future reference.

Children and vulnerable people safety• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory ormental capabilities or lack of experience and knowledge ifthey have been given supervision or instruction concerningthe use of the appliance in a safe way and understand thehazards involved.

• Children between 3 and 8 years of age and persons withvery extensive and complex disabilities shall be kept awayunless continuously supervised.

• Children of less than 3 years of age should be kept awayunless continuously supervised.

• Do not let children play with the appliance.• Keep all packaging away from children and dispose of it

appropriately.• Keep children and pets away from the appliance when it

operates or when it cools down. Accessible parts are hot.• If the appliance has a child safety device, it should be

activated.• Children shall not carry out cleaning and user maintenance

of the appliance without supervision.

2

General Safety• WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to avoidtouching heating elements.

• Do not operate the appliance by means of an externaltimer or separate remote-control system.

• WARNING: Unattended cooking on a hob with fat or oilcan be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch off theappliance and then cover flame e.g. with a lid or a fireblanket.

• CAUTION: The cooking process has to be supervised. Ashort term cooking process has to be supervisedcontinuously.

• WARNING: Danger of fire: Do not store items on thecooking surfaces.

• Metallic objects such as knives, forks, spoons and lidsshould not be placed on the hob surface since they can gethot.

• Do not use a steam cleaner to clean the appliance.• After use, switch off the hob element by its control and do

not rely on the pan detector.• If the glass ceramic surface / glass surface is cracked,

switch off the appliance and unplug it from the mains. Incase the appliance is connected to the mains directly usingjunction box, remove the fuse to disconnect the appliancefrom power supply. In either case contact the AuthorisedService Centre.

• If the supply cord is damaged, it must be replaced by themanufacturer, an authorized Service or similarly qualifiedpersons in order to avoid a hazard.

• WARNING: Use only hob guards designed by themanufacturer of the cooking appliance or indicated by themanufacturer of the appliance in the instructions for use assuitable or hob guards incorporated in the appliance. Theuse of inappropriate guards can cause accidents.

3

SAFETY INSTRUCTIONSInstallation

WARNING! Only a qualifiedperson must install thisappliance.

WARNING! Risk of injury ordamage to the appliance.

• Remove all the packaging.• Do not install or use a damaged

appliance.• Follow the installation instructions

supplied with the appliance.• Keep the minimum distance from other

appliances and units.• Always take care when moving the

appliance as it is heavy. Always usesafety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant toprevent moisture to cause swelling.

• Protect the bottom of the appliancefrom steam and moisture.

• Do not install the appliance adjacent toa door or under a window. Thisprevents hot cookware falling from theappliance when the door or the windowis opened.

• Each appliance has cooling fans on thebottom.

• If the appliance is installed above adrawer:– Do not store any small pieces or

sheets of paper that could be pulledin, as they can damage the coolingfans or impair the cooling system.

– Keep a distance of minimum 2 cmbetween the bottom of theappliance and parts stored in thedrawer.

Electrical ConnectionWARNING! Risk of fire andelectric shock.

• All electrical connections should bemade by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation makesure that the appliance is disconnectedfrom the power supply.

• Make sure that the parameters on therating plate are compatible with theelectrical ratings of the mains powersupply.

• Make sure the appliance is installedcorrectly. Loose and incorrect electricitymains cable or plug (if applicable) canmake the terminal become too hot.

• Use the correct electricity mains cable.• Do not let the electricity mains cable

tangle.• Make sure that a shock protection is

installed.• Use the strain relief clamp on the cable.• Make sure the mains cable or plug (if

applicable) does not touch the hotappliance or hot cookware, when youconnect the appliance to the nearsockets.

• Do not use multi-plug adapters andextension cables.

• Make sure not to cause damage to themains plug (if applicable) or to themains cable. Contact our AuthorisedService Centre or an electrician tochange a damaged mains cable.

• The shock protection of live andinsulated parts must be fastened insuch a way that it cannot be removedwithout tools.

• Connect the mains plug to the mainssocket only at the end of theinstallation. Make sure that there isaccess to the mains plug after theinstallation.

• If the mains socket is loose, do notconnect the mains plug.

• Do not pull the mains cable todisconnect the appliance. Always pullthe mains plug.

• Use only correct isolation devices: lineprotecting cut-outs, fuses (screw typefuses removed from the holder), earthleakage trips and contactors.

• The electrical installation must have anisolation device which lets you

4

disconnect the appliance from themains at all poles. The isolation devicemust have a contact opening width ofminimum 3 mm.

UseWARNING! Risk of injury,burns and electric shock.

• Remove all the packaging, labellingand protective film (if applicable) beforefirst use.

• Use this appliance in a householdenvironment.

• Do not change the specification of thisappliance.

• Make sure that the ventilation openingsare not blocked.

• Do not let the appliance stayunattended during operation.

• Set the cooking zone to “off” after eachuse.

• Do not rely on the pan detector.• Do not put cutlery or saucepan lids on

the cooking zones. They can becomehot.

• Do not operate the appliance with wethands or when it has contact withwater.

• Do not use the appliance as a worksurface or as a storage surface.

• If the surface of the appliance iscracked, disconnect immediately theappliance from the power supply. Thisto prevent an electrical shock.

• Users with a pacemaker must keep adistance of minimum 30 cm from theinduction cooking zones when theappliance is in operation.

• When you place food into hot oil, it maysplash.

WARNING! Risk of fire andexplosion

• Fats and oil when heated can releaseflammable vapours. Keep flames orheated objects away from fats and oilswhen you cook with them.

• The vapours that very hot oil releasescan cause spontaneous combustion.

• Used oil, that can contain foodremnants, can cause fire at a lowertemperature than oil used for the firsttime.

• Do not put flammable products or itemsthat are wet with flammable productsin, near or on the appliance.

WARNING! Risk of damage tothe appliance.

• Do not keep hot cookware on thecontrol panel.

• Do not put a hot pan cover on the glasssurface of the hob.

• Do not let cookware to boil dry.• Be careful not to let objects or

cookware fall on the appliance. Thesurface can be damaged.

• Do not activate the cooking zones withempty cookware or without cookware.

• Do not put aluminium foil on theappliance.

• Cookware made of cast iron, aluminiumor with a damaged bottom can causescratches on the glass / glass ceramic.Always lift these objects up when youhave to move them on the cookingsurface.

• This appliance is for cooking purposesonly. It must not be used for otherpurposes, for example room heating.

Care and cleaning• Clean the appliance regularly to

prevent the deterioration of the surfacematerial.

• Deactivate the appliance and let it cooldown before you clean it.

• Disconnect the appliance from theelectrical supply before maintenance.

• Do not use water spray and steam toclean the appliance.

• Clean the appliance with a moist softcloth. Only use neutral detergents. Donot use any abrasive products,abrasive cleaning pads, solvents ormetal objects.

5

Service• To repair the appliance contact an

Authorised Service Centre.• Use original spare parts only.

DisposalWARNING! Risk of injury orsuffocation.

• Contact your municipal authority forinformation on how to discard theappliance correctly.

• Disconnect the appliance from themains supply.

• Cut off the mains electrical cable closeto the appliance and dispose of it.

PRODUCT DESCRIPTIONCooking surface layout

3 2

1

1

1

1 Induction cooking zone2 Control panel3 Flexible induction cooking area

consisting of four sections

Control panel layout

1113

6 751 2 3 4 8

12 910

Use the sensor fields to operate the appliance. The displays, indicators and sounds tellwhich functions operate.

Sensorfield

Function Comment

1 ON / OFF To activate and deactivate the hob.

2 Lock / Child Safety De‐vice

To lock / unlock the control panel.

3 Flexi-Heat To activate and deactivate the function.

6

Sensorfield

Function Comment

4 Flexi4Zone To switch between three modes of the func‐tion.

5 - Heat setting display To show the heat setting.

6 - Timer indicators ofcooking zones

To show for which zone you set the time.

7 - Timer display To show the time in minutes.

8 Auto-Vent To activate and deactivate the manual modeof the function.

9 Pause To activate and deactivate the function.

10 - Control bar To set a heat setting.

11 - To select the cooking zone.

12 / - To increase or decrease the time.

13 - Control bar To show the heat setting for the flexible in‐duction cooking area.

Heat setting displays

Display Description

The cooking zone is deactivated.

- The cooking zone operates.

Pause operates.

Accelerator operates.

Power function operates.

+ digit There is a malfunction.

/ / Eco-Heat (3-step Residual heat indicator): continue cooking / keepwarm / residual heat.

Lock / Child Safety Device operates.

Incorrect or too small cookware or no cookware on the cooking zone.

Automatic Switch Off operates.

/ / Flexi-Heat operates.

7

Eco-Heat (3 step Residual heatindicator)

WARNING! / / Thereis a risk of burns from residualheat. The indicators show thelevel of the residual heat for thecooking zones you arecurrently using. The indicatorsmay also come on for theneighbouring cooking zoneseven if you are not using them.

The induction cooking zones produce theheat necessary for the cooking processdirectly in the bottom of the cookware. Theglass ceramic is heated by the heat of thecookware.

DAILY USE

WARNING! Refer to Safetychapters.

Activating and deactivatingTouch for 1 second to activate ordeactivate the hob.

Automatic Switch OffThe function deactivates the hobautomatically if:• all cooking zones are deactivated,• you do not set the heat setting after you

activate the hob,• you spill something or put something

on the control panel for more than 10seconds (a pan, a cloth, etc.). Anacoustic signal sounds and the hobdeactivates. Remove the object orclean the control panel.

• the hob gets too hot (e.g. when asaucepan boils dry). Let the cookingzone cool down before you use the hobagain.

• you use incorrect cookware. Thesymbol comes on and the cookingzone deactivates automatically after 2minutes.

• you do not deactivate a cooking zoneor change the heat setting. After sometime comes on and the hobdeactivates.

The relation between the heat settingand the time after which the hobdeactivates:

Heat setting The hob deacti‐vates after

, 1 - 3 6 hours

4 - 7 5 hours

8 - 9 4 hours

10 - 14 1.5 hour

The heat settingTo set or change the heat setting:Touch the control bar at the correct heatsetting or move your finger along thecontrol bar until you reach the correct heatsetting.

Using the cooking zonesPlace the cookware in the centre of theselected zone. Induction cooking zonesadapt to the dimension of the bottom ofthe cookware automatically.

8

AcceleratorActivate this function to get a desired heatsetting in a shorter time. When it is on, thezone operates on the highest setting in thebeginning and then continues to cook atthe desired heating setting.

To activate the function thecooking zone must be cold.

To activate the function for a cookingzone: touch the end of the control bar onthe right ( comes on). Immediatelytouch a desired heat setting. After 3seconds comes on.To deactivate the function: change theheat setting.

Power functionThis function makes more power availableto the induction cooking zones. Thefunction can be activated for the inductioncooking zone only for a limited period oftime. After this time the induction cookingzone automatically sets back to thehighest heat setting.

Refer to “Technical information”chapter.

To activate the function for a cookingzone: touch the end of the control bar onthe right. comes on.To deactivate the function: change theheat setting.

TimerCount Down TimerYou can use this function to set how longthe cooking zone should operate for asingle cooking session.First set the heat setting for the cookingzone then set the function.To set the cooking zone: touch again and again until the indicator of anecessary cooking zone comes on.

To activate the function: touch of thetimer to set the time (00 - 99 minutes).

When the indicator of the cooking zonestarts to flash slowly the time countsdown.To see the remaining time: set thecooking zone with . The indicator ofthe cooking zone starts to flash quickly.The display shows the remaining time.To change the time: set the cooking zonewith . Touch or .To deactivate the function: set thecooking zone with and touch .The remaining time counts back to 00.The indicator of the cooking zone goesout.

When the time comes to anend, the sound operates and00 flashes. The cooking zonedeactivates.

To stop the sound: touch .CountUp Timer (The count up timer)You can use this function to monitor howlong the cooking zone operates.To set the cooking zone: touch again and again until the indicator of anecessary cooking zone comes on.

To activate the function: touch of thetimer. comes on. When the indicator ofthe cooking zone starts to flash slowly thetime counts up. The display switchesbetween and counted time (minutes).To see how long the cooking zoneoperates: set the cooking zone with

. The indicator of the cooking zonestarts to flash quickly. The display showshow long the zone operates.To deactivate the function: set thecooking zone with and touch or

. The indicator of the cooking zone goesout.Minute MinderYou can use this function as a MinuteMinder when the hob is activated and the

9

cooking zones do not operate. The heatsetting display shows .To activate the function: touch .Touch or of the timer to set the time.When the time comes to an end, thesound operates and 00 flashes.To stop the sound: touch .

The function has no effect onthe operation of the cookingzones.

PauseThis function sets all cooking zones thatoperate to the lowest heat setting.When the function operates, all othersymbols on the control panels are locked.The function does not stop the timerfunctions.Touch to activate the function.

comes on. The heat setting is loweredto 1.To deactivate the function, touch .The previous heat setting comes on.

LockYou can lock the control panel whilecooking zones operate. It prevents anaccidental change of the heat setting.Set the heat setting first.

To activate the function: touch . comes on for 4 seconds. The Timer stayson.To deactivate the function: touch .The previous heat setting comes on.

When you deactivate the hob,you also deactivate thisfunction.

Child Safety DeviceThis function prevents an accidentaloperation of the hob.To activate the function: activate the hobwith . Do not set the heat setting. Touch

for 4 seconds. comes on.Deactivate the hob with .To deactivate the function: activate thehob with . Do not set the heat setting.Touch for 4 seconds. comes on.Deactivate the hob with .To override the function for only onecooking time: activate the hob with .

comes on. Touch for 4 seconds. Set the heat setting in 10 seconds. Youcan operate the hob. When you deactivatethe hob with the function operatesagain.

OffSound Control (Deactivatingand activating the sounds)Deactivate the hob. Touch for 3seconds. The display comes on and goesout. Touch for 3 seconds. or comes on. Touch of the timer tochoose one of the following:• - the sounds are off• - the sounds are onTo confirm your selection wait until thehob deactivates automatically.

When the function is set to you canhear the sounds only when:• you touch • Minute Minder comes down• Count Down Timer comes down• you put something on the control panel.

Power management• Cooking zones are grouped according

to the location and number of thephases in the hob. See the illustration.

• Each phase has a maximum electricityloading of 3700 W.

• The function divides the powerbetween cooking zones connected tothe same phase.

• The function activates when the totalelectricity loading of the cooking zones

10

connected to a single phase exceeds3700 W.

• The function decreases the power tothe other cooking zones connected tothe same phase.

• The heat setting display of the reducedzones changes between two levels.

Auto-VentIt is an advanced automatic function whichconnects the hob to an Auto-Vent hood.Both the hob and the hood have aninfrared signal communicator. Speed ofthe fan is defined automatically on basis ofmode setting and temperature of thehottest cookware on the hob. You canalso operate the fan from the hobmanually.

For most of the hoods theremote system is originallydeactivated. Activate it beforeyou use the function. For moreinformation refer to hood usermanual.

Operating the function automaticallyTo operate the function automatically setthe automatic mode to H1 – H6. The hobis originally set to H5. The hood reactswhenever you operate the hob. The hobrecognizes temperature of the cookwareautomatically and adjusts the speed of thefan.

Automatic modes

Auto‐maticlight

Boil‐ing1)

Fry‐ing2)

ModeH0

Off Off Off

ModeH1

On Off Off

ModeH2 3)

On Fanspeed1

Fanspeed1

ModeH3

On Off Fanspeed1

ModeH4

On Fanspeed1

Fanspeed1

ModeH5

On Fanspeed1

Fanspeed2

ModeH6

On Fanspeed2

Fanspeed3

1) The hob detects the boiling process and activatesfan speed in accordance with automatic mode.2) The hob detects the frying process and activatesfan speed in accordance with automatic mode.3) This mode activates the fan and the light and doesnot rely on the temperature.

Changing the automatic mode1. Deactivate the appliance.2. Touch for 3 seconds. The display

comes on and goes off.3. Touch for 3 seconds.4. Touch a few times until

comes on.5. Touch of the Timer to select an

automatic mode.To operate the hood directly onthe hood panel deactivate theautomatic mode of the function.

11

When you finish cooking anddeactivate the hob, the hoodfan may still operate for acertain period of time. After thattime the system deactivates thefan automatically and preventsyou from accidental activationof the fan for the next 30seconds.

Operating the fan speed manuallyYou can also operate the functionmanually. To do that touch when thehob is active. This deactivates automaticoperation of the function and allows you tochange the fan speed manually. Whenyou press you raise the fan speed byone. When you reach an intensive level

and press again you will set fan speedto 0 which deactivates the hood fan. Tostart the fan again with fan speed 1 touch

.

To activate automatic operationof the function, deactivate thehob and activate it again.

Activating the lightYou can set the hob to activate the lightautomatically whenever you activate thehob. To do so set the automatic mode toH1 – H6.

The light on the hooddeactivates 2 minutes afterdeactivating the hob.

FLEXIBLE INDUCTION COOKING AREA


Flexi4Zone functionThe flexible induction cooking areaconsists of four sections. The sections canbe combined into two cooking zones withdifferent size, or into one large cookingarea. You choose the combination of thesections by choosing the mode applicableto the size of the cookware you want touse. There are three modes: Standard(activated automatically when you activatethe hob), Big mode and Max mode.

To set the heat setting use twoleft side control bars.

Switching between the modesTo switch between the modes use sensorfield: .

When you switch between themodes the heat setting is setback to 0.

Diameter and position of the cookwareChoose the mode applicable to the sizeand the shape of the cookware. Thecookware should cover the selected areaas much as possible. Place the cookwarecentrally on the selected area!Place the cookware with the bottomdiameter smaller than 160 mm centrally ona single section.

12

100-160mm

Place the cookware with the bottomdiameter larger then 160 mm centrallybetween two sections.

> 160 mm

Flexi4Zone standard modeThis mode is active when you activate thehob. It connects the sections into twoseparate cooking zones. You can set theheat setting for each zone separately. Usetwo left side control bars.

Correct cookware position:

Incorrect cookware position:

Flexi4Zone big modeTo activate the mode press until yousee the correct mode indicator . Thismode connects three rear sections intoone cooking zone. The one front section isnot connected and operates as a separatecooking zone. You can set the heat settingfor each zone separately. Use two left sidecontrol bars.

Correct cookware position:To use this mode you have to place thecookware on the three connectedsections. If you use cookware smaller thantwo sections the display shows andafter 2 minutes the zone switches off.

13


Flexi4Zone max modeTo activate the mode press until yousee the correct mode indicator . Thismode connects all sections into onecooking zone. To set the heat setting useany of the two control bars on the left side.

Correct cookware position:To use this mode you have to place thecookware on the four connected sections.If you use cookware smaller than threesections the display shows and after 2minutes the zone switches off.


Flexi-HeatThis function allows you to adjust thetemperature by moving the cookware to adifferent position on the induction cookingarea.The function divides the induction cookingarea into three areas with different heatsettings. The hob detects the position ofthe cookware and adjust the heat settingcorresponding with the position. You canplace the cookware in the front, middle orrear position. If you place the cookware inthe front you get the highest heat setting.To decrease it, move the cookware tomiddle or rear position.

Use only one pot when youoperate the function.

14

General information:• 160 mm is the minimum bottom

diameter of the cookware for thisfunction.

• Heat setting display for the left rearcontrol bar shows the position of thecookware on the induction cookingarea. Front , middle , rear .

• Heat setting display for the left frontcontrol bar shows the heat setting. Tochange the heat setting use left frontcontrol bar.

• When you activate the function for thefirst time you will get heat setting for the front position, for the middleposition and for the rear position.

You can change the heat settings foreach position separately. The hob willremember your heat settings next timeyou activate the function.

Activating the functionTo activate the function place thecookware in the correct position on thecooking area. Touch . The indicatorabove the symbol comes on. If you do notplace the cookware on the cooking area

comes on and after 2 minutes theflexible induction cooking area is set to .Deactivating the function

To deactivate the function touch or setthe heat setting to . The indicator abovethe symbol goes off.

HINTS AND TIPS


CookwareFor induction cooking zones astrong electro-magnetic fieldcreates the heat in thecookware very quickly.

Use the induction cookingzones with suitable cookware.

Cookware material• correct: cast iron, steel, enamelled

steel, stainless steel, multi-layer bottom(with a correct marking from amanufacturer).

• not correct: aluminium, copper, brass,glass, ceramic, porcelain.

Cookware is suitable for an inductionhob if:

15

• water boils very quickly on a zone setto the highest heat setting.

• a magnet pulls on to the bottom of thecookware.

The bottom of the cookwaremust be as thick and flat aspossible.Ensure pan bases are cleanand dry before placing on thehob surface.

Cookware dimensionsInduction cooking zones adapt to thedimension of the bottom of the cookwareautomatically.The cooking zone efficiency is related tothe diameter of the cookware. Thecookware with a diameter smaller than theminimum receives only a part of the powergenerated by the cooking zone.

Refer to "Technical data".

The noises during operationIf you can hear:• crack noise: cookware is made of

different materials (a sandwichconstruction).

• whistle sound: you use a cooking zonewith a high power level and the

cookware is made of different materials(a sandwich construction).

• humming: you use a high power level.• clicking: electric switching occurs.• hissing, buzzing: the fan operates.The noises are normal and do notindicate any malfunction.

Eco-Off (Eco Timer)To save energy, the heater of the cookingzone deactivates before the count downtimer sounds. The difference in theoperation time depends on the heatsetting level and the length of the cookingoperation.

Examples of cookingapplicationsThe correlation between the heat settingof a zone and its consumption of power isnot linear. When you increase the heatsetting, it is not proportional to theincrease of the consumption of power. Itmeans that a cooking zone with themedium heat setting uses less than a halfof its power.

The data in the table is forguidance only.

Heat setting Use to: Time(min)

Hints

- 1 Keep cooked food warm. asnec‐essary

Put a lid on the cookware.

1 - 3 Hollandaise sauce, melt: but‐ter, chocolate, gelatine.

5 - 25 Mix from time to time.

1 - 3 Solidify: fluffy omelettes, bakedeggs.

10 -40

Cook with a lid on.

3 - 5 Simmer rice and milkbaseddishes, heat up ready-cookedmeals.

25 -50

Add at least twice as much liq‐uid as rice, mix milk disheshalfway through the proce‐dure.

16

Heat setting Use to: Time(min)

Hints

5 - 7 Steam vegetables, fish, meat. 20 -45

Add a couple of tablespoonsof liquid.

7 - 9 Steam potatoes. 20 -60

Use max. ¼ l of water for 750g of potatoes.

7 - 9 Cook larger quantities of food,stews and soups.

60 -150

Up to 3 l of liquid plus ingredi‐ents.

9 - 12 Gentle fry: escalope, veal cor‐don bleu, cutlets, rissoles,sausages, liver, roux, eggs,pancakes, doughnuts.

asnec‐essary

Turn halfway through.

12 - 13 Heavy fry, hash browns, loinsteaks, steaks.

5 - 15 Turn halfway through.

14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. Power function is activated.

Hints and Tips for Auto-VentWhen you operate the hob with thefunction:• Protect the hood panel from direct

sunlight.• Do not spot halogen light on the hood

panel.• Do not cover the hob control panel.• Do not interrupt the signal between the

hob and the hood (for example with ahand or a cookware handle). See thepicture.

The hood in the picture is onlyexemplary.

Other remotely controlledappliances may block thesignal. Do not use any remotelycontrolled appliances at thetime when you use the functionon the hob.

Cooker hoods with the Auto-VentfunctionTo find the full range of cooker hoodswhich work with this function refer to ourconsumer website.

17

CARE AND CLEANING


General information• Clean the hob after each use.• Always use cookware with a clean

base.• Scratches or dark stains on the surface

have no effect on how the hoboperates.

• Use a special cleaner suitable for thesurface of the hob.

• Use a special scraper for the glass.The printing on the flexibleinduction cooking area maybecome dirty or change itscolour from sliding thecookware. You can clean thearea in a standard way.

Cleaning the hob• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar,otherwise, the dirt can cause damageto the hob. Take care to avoid burns.Use a special hob scraper on the glasssurface at an acute angle and move theblade on the surface.

• Remove when the hob is sufficientlycool: limescale rings, water rings, fatstains, shiny metallic discoloration.Clean the hob with a moist cloth and anon-abrasive detergent. After cleaning,wipe the hob dry with a soft cloth.

• Remove shiny metallicdiscoloration: use a solution of waterwith vinegar and clean the glasssurface with a cloth.

TROUBLESHOOTING


What to do if...

Problem Possible cause Remedy

You cannot activate or oper‐ate the hob.

The hob is not connected toan electrical supply or it isconnected incorrectly.

Check if the hob is correctlyconnected to the electricalsupply. Refer to the connec‐tion diagram.

The fuse is blown. Make sure that the fuse isthe cause of the malfunc‐tion. If the fuse is blownagain and again, contact aqualified electrician.

You do not set the heat set‐ting for 10 seconds.

Activate the hob again andset the heat setting in lessthan 10 seconds.

You touched 2 or more sen‐sor fields at the same time.

Touch only one sensor field.

Pause function operates. Refer to "Daily use".

18


There is water or fat stainson the control panel.

Clean the control panel.

An acoustic signal soundsand the hob deactivates.An acoustic signal soundswhen the hob is deactivated.

You put something on oneor more sensor fields.

Remove the object from thesensor fields.

The hob deactivates. You put something on thesensor field .

Remove the object from thesensor field.

Residual heat indicator doesnot come on.

The zone is not hot becauseit operated only for a shorttime or the sensor is dam‐aged.

If the zone operated suffi‐ciently long to be hot, speakto an Authorised ServiceCentre.

Auto-Vent does not work. You covered the controlpanel.

Remove the object from thecontrol panel.

Accelerator does not oper‐ate.

The zone is hot. Let the zone become suffi‐ciently cool.

The highest heat setting isset.

The highest heat setting hasthe same power as the func‐tion.

The heat setting changesbetween two levels.

Power management oper‐ates.

Refer to "Daily use".

The sensor fields becomehot.

The cookware is too large oryou put it too near to thecontrols.

Put large cookware on therear zones if possible.

There is no sound when youtouch the panel sensorfields.

The sounds are deactivated. Activate the sounds. Referto "Daily use".

The flexible induction cook‐ing area does not heat upthe cookware.

The cookware is in a wrongposition on the flexible in‐duction cooking area.

Place the cookware in thecorrect position on the flexi‐ble induction cooking area.The position of the cook‐ware depends on the activa‐ted function or functionmode. Refer to "Flexible in‐duction cooking area".

19


The diameter of the bottomof the cookware is incorrectfor the activated function orfunction mode.

Use cookware with a diame‐ter applicable to the activa‐ted function or functionmode. Use cookware with adiameter smaller than 160mm on a single section ofthe flexible induction cook‐ing area. Refer to "Flexibleinduction cooking area".

comes on. Automatic Switch Off oper‐ates.

Deactivate the hob and acti‐vate it again.

comes on. Child Safety Device or Lockoperates.

Refer to "Daily use".

comes on. There is no cookware on thezone.

Put cookware on the zone.

The cookware is unsuitable. Use suitable cookware. Re‐fer to "Hints and tips".

The diameter of the bottomof the cookware is too smallfor the zone.

Use cookware with correctdimensions. Refer to "Tech‐nical data".

Flexi4Zone operates. One ormore sections of the func‐tion mode which operatesare not covered by the cook‐ware.

Place the cookware on thecorrect number of sectionsof the function mode whichoperates or change thefunction mode. Refer to"Flexible induction cookingarea".

Flexi-Heat operates. Twopots are placed on the flexi‐ble induction cooking area.

Use only one pot. Refer to"Flexible induction cookingarea".

and a number come on. There is an error in the hob. Deactivate the hob and acti‐vate it again after 30 sec‐onds. If comes on again,disconnect the hob from theelectrical supply. After 30seconds, connect the hobagain. If the problem contin‐ues, speak to an AuthorisedService Centre.

You can hear a constantbeep noise.

The electrical connection isincorrect.

Disconnect the hob from theelectrical supply. Ask aqualified electrician to checkthe installation.

20

If you cannot find a solution...If you cannot find a solution to the problemyourself, contact your dealer or anAuthorised Service Centre. Give the datafrom the rating plate. Give also three digitletter code for the glass ceramic (it is inthe corner of the glass surface) and an

error message that comes on. Make sure,you operated the hob correctly. If not theservicing by a service technician or dealerwill not be free of charge, also during thewarranty period. The instructions aboutthe Service Centre and conditions ofguarantee are in the guarantee booklet.

INSTALLATION


Before the installationBefore you install the hob, write down theinformation bellow from the rating plate.The rating plate is on the bottom of thehob.

Serial number ...........................

Built-in hobsOnly use the built-in hobs after youassemble the hob into correct built-in unitsand work surfaces that align to thestandards.

Connection cable• The hob is supplied with a connection

cable.• To replace the damaged mains cable,

use the cable type: H05V2V2-F whichwithstands a temperature of 90°C orhigher. Speak to your local ServiceCentre.

Assembly

min.

50mm

min.

500mm

min.

55mm

R 5mm

490+1

mm880+1mm

21

min.28 mm

min.12 mm

min. 60mm

If the appliance is installedabove a drawer, the hobventilation can warm up theitems stored in the drawerduring the cooking process.You can instal a separationpanel but it is not mandatory.

TECHNICAL DATARating plate

Model SI1F7955B PNC 949 594 445 00Typ 62 E5A 05 AA 400 V 3N 50 - 60 HzInduction 11.0 kW Made in GermanySer.Nr. ................. 11.0 kWSMEG

22

Cooking zones specification

Cooking zone Nominal pow‐er (maximumheat setting)[W]

Power func‐tion [W]

Power func‐tion maximumduration [min]

Cookware di‐ameter [mm]

Middle front 18003500

28003700

1010

145 - 245245 - 280

Right front 1400 2500 4 125 - 145

Right rear 2300 3200 10 125 - 210

Flexible induc‐tion cookingarea

2300 3200 10 minimum 100

The power of the cooking zones can bedifferent in some small range from thedata in the table. It changes with thematerial and dimensions of the cookware.

For optimal cooking results use cookwareno larger than the diameter in the table.

ENERGY EFFICIENCYProduct information according to EU 66/2014

Model identification SI1F7955B

Type of hob Built-In Hob

Number of cooking zones 3

Number of cooking areas 1

Heating technology Induction

Diameter of circular cook‐ing zones (Ø)

Middle frontRight frontRight rear

28.0 cm14.5 cm21.0 cm

Lenght (L) and width (W) ofthe cooking area

Left L 45.3 cmW 21.4 cm

Energy consumption percooking zone (EC electriccooking)

Middle frontRight frontRight rear

176.5 Wh / kg180.2 Wh / kg179.6 Wh / kg

Energy consumption of thecooking area (EC electriccooking)

Left 182.6 Wh / kg

Energy consumption of thehob (EC electric hob)

180.7 Wh / kg

23

EN 60350-2 - Household electric cookingappliances - Part 2: Hobs - Methods formeasuring performance

Energy savingYou can save energy during everydaycooking if you follow below hints.• When you heat up water, use only the

amount you need.

• If it is possible, always put the lids onthe cookware.

• Before you activate the cooking zoneput the cookware on it.

• Put the smaller cookware on thesmaller cooking zones.

• Put the cookware directly in the centreof the cooking zone.

• Use the residual heat to keep the foodwarm or to melt it.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol . Putthe packaging in relevant containers torecycle it. Help protect the environmentand human health by recycling waste ofelectrical and electronic appliances. Do

not dispose of appliances marked with thesymbol with the household waste.Return the product to your local recyclingfacility or contact your municipal office.

24

867346323-C-152018

Documents

sation formation User Manual Notice d'utili‐ Benutzerin ... · sockets. • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug