DATE:

CATALOG NUMBER LOGIC:

PROJECT: TYPE:

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

SARATOGA - PM2RM REMOTE DRIVER HOUSING (TREE STRAP)

CATALOG NUMBER LOGIC

Example: PM2RM - TS-20 - INC - WHW - MT - MB

MATERIAL

Aluminum

SERIES

PM2RM - Universal Power Module 2 Remote

MOUNTING

TS-Length - Tree Strap (Specify adjustable strap length) 18” Standard Min.

CONTROL

INC - 10W TRIAC/ELV Dimming 1-100%, 120V only

010 - 10W Dimming Driver 0-10V Dimming 1-100%

FINISH

Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)

Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)

(Also available in RAL Finishes. See submittal SUB-1439-00)

INPUT VOLTAGE

MT - 120-277 VAC

OPTIONS

SC - Safety Cable for use with Tree Strap Mount. Cable length to match strap length. 18” Standard Min.

MB - Mounting Brackets

ORDER FIXTURE SEPARATELY.

05/28/2020 SKU-1313 PM2RM P1

DATE: PROJECT: TYPE:

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

SARATOGA - PM2RM REMOTE DRIVER HOUSING (TREE STRAP)

REMOTE WIRING

Electronic TransformerRemote transformer installations require inter-connected wiring between the lamp and transformer (by others). Electronic transformers have speci�c wiring requirements between these components. Transformer manufacturers regularly recommend the following wiring details for such installations:

• Do not exceed 8 foot overall wiring distance using 12 gauge copper wire.

Please consult the factory through your local B-K Lighting Sales Representative prior to �nalizing any installation detail utilizing remote transformer wiring.

Failure to comply with specific wiring requirements will void product warranty.

(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)

O.C.

2 1/4"(57mm)

9 1/8"(232mm)

1 3/4" (44mm)

OPTIONAL MOUNTING BRACKET

2 1/4"(57mm)

7 3/4"(197mm)

3 7/8"(98mm)

SIDE VIEW

(4) Patented 1/2" (13mm) Knockouts For Use with Surface Conduit (By Others)

END VIEW

3 3/8"(86mm) 3" (76mm) Minimum

Specify Length

2" (51mm)

6 13/16"(173mm)

Adjustable Nylon Strap

FRONT VIEW

SAFETY CABLE

Safety Cable withOptional

Secure Connection,No Tools RequiredFor Assembly

05/28/2020 SKU-1313 PM2RM P1

ORDER FIXTURE SEPARATELY.

DATE: PROJECT: TYPE:

Accessories (Configure separately)

SPECIFICATIONS

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

Electrical

PHYSICAL

DRIVER One (1) 350mA, Class A, constant current driver. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.9 Power Factor, 0.25A input current, .20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. INC Driver - For use with Incandescent Standard TRIAC or ELV dimmers. 1-100% range, 120V Only. 010 Driver - For use with 0-10V dimmers. 1-100% range, external controls by others.

TREE INSTALLATION Tree Strap mounting system facilitates non-invasive installation. Adjustable nylon strap is mold and mildew resistant and will not hinder tree growth. Stainless steel safety cable maintains UPM mounting when nylon strap is disengaged.

HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 3/4” NPT female conduit entries per end cap for through wiring.

INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.

PATENTED KNOCKOUTS Four (4) 3/4” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.

FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).

WARRANTY 5-year limited warranty.

CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.

05/28/2020 SKU-1313 PM2RM P1

SARATOGA - PM2RM REMOTE DRIVER HOUSING (TREE STRAP) ORDER FIXTURE SEPARATELY.

DATE:

CATALOG NUMBER LOGIC:

PROJECT: TYPE:

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

SARATOGA - PM2RM REMOTE DRIVER HOUSING (SURFACE MOUNT)

CATALOG NUMBER LOGIC

Example: PM2RM - SM - INC - WHW - MT

MATERIAL

Aluminum

SERIES

PM2RM - Universal Power Module 2 Remote

MOUNTING

SM - Surface Mount

CONTROL

INC - 10W TRIAC/ELV Dimming 1-100%, 120V only

010 - 10W Dimming Driver 0-10V Dimming 1-100%

FINISH

Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)

Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)

(Also available in RAL Finishes. See submittal SUB-1439-00)

INPUT VOLTAGE

MT - 120-277 VAC

05/28/2020 SKU-1313 PM2RM P2

ORDER FIXTURE SEPARATELY.

DATE: PROJECT: TYPE:

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

REMOTE WIRING

Electronic TransformerRemote transformer installations require inter-connected wiring between the lamp and transformer (by others). Electronic transformers have speci�c wiring requirements between these components. Transformer manufacturers regularly recommend the following wiring details for such installations:

• Do not exceed 8 foot overall wiring distance using 12 gauge copper wire.

Please consult the factory through your local B-K Lighting Sales Representative prior to �nalizing any installation detail utilizing remote transformer wiring.

Failure to comply with speci�c wiring requirements will void product warranty.

END VIEW

(4) Patented 1/2" (13mm) Knockouts For Use with Surface Conduit (By Others)

2 3/8"(60mm)

With SuppliedMounting Bracket

(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)

7 3/4"(197mm)

2 1/4"(57mm)

9 1/4"(235mm)

O.C.

8 5/8"(219mm)

O.C.

1 3/4"(44mm)

3 3/8"

TOP VIEW

3 7/8"(98mm)

SIDE VIEW

05/28/2020 SKU-1313 PM2RM P2

SARATOGA - PM2RM REMOTE DRIVER HOUSING (SURFACE MOUNT) ORDER FIXTURE SEPARATELY.

DATE: PROJECT: TYPE:

Accessories (Configure separately)

SPECIFICATIONS

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

Electrical

PHYSICAL

DRIVER One (1) 350mA, Class A, constant current driver. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.9 Power Factor, 0.25A input current, .20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. INC Driver - For use with Incandescent Standard TRIAC or ELV dimmers. 1-100% range, 120V Only. 010 Driver - For use with 0-10V dimmers. 1-100% range, external controls by others.

SURFACE MOUNT For use with side entry, surface conduits. Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation.

HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 3/4” NPT female conduit entries per end cap for through wiring.

INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.

PATENTED KNOCKOUTS Four (4) 3/4” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.

FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).

WARRANTY 5-year limited warranty.

CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.

05/28/2020 SKU-1313 PM2RM P2

SARATOGA - PM2RM REMOTE DRIVER HOUSING (SURFACE MOUNT) ORDER FIXTURE SEPARATELY.

DATE:

CATALOG NUMBER LOGIC:

PROJECT: TYPE:

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

SARATOGA - PM2RM REMOTE DRIVER HOUSING (JUNCTION BOX - CANLOCK)

CATALOG NUMBER LOGIC

Example: PM2RM - CT - INC - WHW - MT - MB

MATERIAL

Aluminum

SERIES

PM2RM - Universal Power Module 2 Remote

MOUNTING

CR - Round Camlock Canopy (Recessed Junction Box)

CT - Rectangular Camlock Canopy (Recessed Junction Box)

CONTROL

INC - 10W TRIAC/ELV Dimming 1-100%, 120V only

010 - 10W Dimming Driver 0-10V Dimming 1-100%

FINISH

Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)

Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)

(Also available in RAL Finishes. See submittal SUB-1439-00)

INPUT VOLTAGE

MT - 120-277 VAC

OPTIONS

MB - Mounting Brackets

05/28/2020 SKU-1313 PM2RM P3

ORDER FIXTURE SEPARATELY.

DATE: PROJECT: TYPE:

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

REMOTE WIRING

Electronic TransformerRemote transformer installations require inter-connected wiring between the lamp and transformer (by others). Electronic transformers have speci�c wiring requirements between these components. Transformer manufacturers regularly recommend the following wiring details for such installations:

• Do not exceed 8 foot overall wiring distance using 12 gauge copper wire.

Please consult the factory through your local B-K Lighting Sales Representative prior to �nalizing any installation detail utilizing remote transformer wiring.

Failure to comply with speci�c wiring requirements will void product warranty.

3"(76mm)

3 1/4"(83mm)

O.C.5"(127mm)

(3mm)

RECTANGULAR CAMLOCK CANOPY

5" Dia.(127mm)

1/8"(3mm)

1/8"(3mm)

ROUND CAMLOCK CANOPY

(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)

O.C.

2 1/4"(57mm)

9 1/8"(232mm)

1 3/4" (44mm)

OPTIONAL MOUNTING BRACKET

END VIEW

(4) Patented 1/2" (13mm) Knockouts For Use withSurface Conduit (By Others)

2 1/2"(64mm)

With SuppliedMounting Plate

7 3/4"(197mm)

3 3/8"(86mm)

FRONT VIEW

3 7/8"(98mm)

SIDE VIEW

05/28/2020 SKU-1313 PM2RM P3

SARATOGA - PM2RM REMOTE DRIVER HOUSING (JUNCTION BOX - CANLOCK) ORDER FIXTURE SEPARATELY.

DATE: PROJECT: TYPE:

Accessories (Configure separately)

SPECIFICATIONS

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

Electrical

PHYSICAL

DRIVER One (1) 350mA, Class A, constant current driver. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.9 Power Factor, 0.25A input current, .20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. INC Driver - For use with Incandescent Standard TRIAC or ELV dimmers. 1-100% range, 120V Only. 010 Driver - For use with 0-10V dimmers. 1-100% range, external controls by others.

ROUND CAMLOCK CANOPY (RECESSED JUNCTION BOX)

5” dia., machined aluminum construction. Includes stainless steel universal mounting ring for use with 4” octagonal junction box. Two (2) tamper-resistant, black oxide stainless steel mounting screws. 1/8” thick HT-805A silicone foam gasket for water-tight seal. Integral Camlock provides additional 30° adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface.

RECTANGULAR CAMLOCK CANOPY (RECESSED JUNCTION BOX)

Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 1/2” NPT female conduit entries per end cap for through wiring.

HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 3/4” NPT female conduit entries per end cap for through wiring.

INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.

PATENTED KNOCKOUTS Four (4) 3/4” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.

FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).

WARRANTY 5-year limited warranty.

CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.

05/28/2020 SKU-1313 PM2RM P3

SARATOGA - PM2RM REMOTE DRIVER HOUSING (JUNCTION BOX - CANLOCK) ORDER FIXTURE SEPARATELY.

DATE:

CATALOG NUMBER LOGIC:

PROJECT: TYPE:

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

SARATOGA - PM2DRM REMOTE DRIVER HOUSING (TREE STRAP)

CATALOG NUMBER LOGIC

Example: PM2DRM - TS-20 - INC - SAP - MT - MB

MATERIAL

Aluminum

SERIES

PM2DRM - Universal Power Module 2 Dual Remote

MOUNTING

TS-Length - Tree Strap (Specify adjustable strap length) 18” Standard Min.

CONTROL

INC - 10W TRIAC/ELV Dimming 1-100%, 120V only

010 - 10W Dimming Driver 0-10V Dimming 1-100%

FINISH

Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)

Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)

(Also available in RAL Finishes. See submittal SUB-1439-00)

INPUT VOLTAGE

MT - 120-277 VAC

OPTIONS

SC - Safety Cable for use with Tree Strap Mount. Cable length to match strap length. 18” Standard Min.

MB - Mounting Brackets

05/28/2020 SKU-1313 PM2DRM P1

ORDER FIXTURE SEPARATELY.

DATE: PROJECT: TYPE:

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

REMOTE WIRING

LED DriverRemote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have speci�c wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations:

• Do not exceed 50 foot overall wiring distance using 12 gauge copper wire.

Failure to comply with speci�c wiring requirements will void product warranty.

OPTIONAL MOUNTING BRACKET

(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)

O.C.

2 1/4"(57mm)

13 7/8”(352mm)

1 3/4"(44mm)

SAFETY CABLE

Safely Cable with Optional

Secure Connection, No Tools Required for Assembly

(4) 1/2" 13mm) Knockouts For Use with Surface Conduit (By Others)

END VIEW

2" (51mm)

3 3/8"(86mm) 3" (76mm) Minimum

Specify Length6 13/16"(173mm)

Adjustable Nylon Strap

FRONT VIEW

12 1/2"(318mm)

2 1/4"(57mm)

6 1/4"(159mm)

SIDE VIEW

05/28/2020 SKU-1313 PM2DRM P1

SARATOGA - PM2DRM REMOTE DRIVER HOUSING (TREE STRAP) ORDER FIXTURE SEPARATELY.

DATE: PROJECT: TYPE:

Accessories (Configure separately)

SPECIFICATIONS

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

Electrical

PHYSICAL

DRIVER Two (2) 350mA, Class A, constant current drivers. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.9 Power Factor, 0.25A input current, .20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. INC Driver - For use with Incandescent Standard TRIAC or ELV dimmers. 1-100% range, 120V Only. 010 Driver - For use with 0-10V dimmers. 1-100% range, external controls by others.

TREE INSTALLATION Tree Strap mounting system facilitates non-invasive installation. Adjustable nylon strap is mold and mildew resistant and will not hinder tree growth. Stainless steel safety cable maintains UPM mounting when nylon strap is disengaged.

HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 3/4” NPT female conduit entries per end cap for through wiring.

INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.

PATENTED KNOCKOUTS Four (4) 3/4” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.

FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).

WARRANTY 5-year limited warranty.

CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.

05/28/2020 SKU-1313 PM2DRM P1

SARATOGA - PM2DRM REMOTE DRIVER HOUSING (TREE STRAP) ORDER FIXTURE SEPARATELY.

DATE:

CATALOG NUMBER LOGIC:

PROJECT: TYPE:

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

SARATOGA - PM2DRM REMOTE DRIVER HOUSING (SURFACE MOUNT)

CATALOG NUMBER LOGIC

Example: PM2DRM - SM - INC - SAP - MT

MATERIAL

Aluminum

SERIES

PM2DRM - Universal Power Module 2 Dual Remote

MOUNTING

SM - Surface Mount

CONTROL

INC - 10W TRIAC/ELV Dimming 1-100%, 120V only

010 - 10W Dimming Driver 0-10V Dimming 1-100%

FINISH

Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)

Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)

(Also available in RAL Finishes. See submittal SUB-1439-00)

INPUT VOLTAGE

MT - 120-277 VAC

05/28/2020 SKU-1313 PM2DRM P2

ORDER FIXTURE SEPARATELY.

DATE: PROJECT: TYPE:

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

REMOTE WIRING

LED DriverRemote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have speci�c wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations:

• Do not exceed 50 foot overall wiring distance using 12 gauge copper wire.

Failure to comply with speci�c wiring requirements will void product warranty.

END VIEW

(4) 1/2" (13mm)Knockouts For Use with Surface Conduit (By Others)

2 3/8"(60mm)

With SuppliedMounting Bracket

(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)

13 3/8"(340mm)

O.C.

2 1/4"(57mm)

O.C.

13 7/8(352mm)

1 3/4"(44mm)

3 3/8"(86mm)

12 1/2"(318mm)

TOP VIEW

6 1/4"(158mm)

SIDE VIEW

05/28/2020 SKU-1313 PM2DRM P2

SARATOGA - PM2DRM REMOTE DRIVER HOUSING (SURFACE MOUNT) ORDER FIXTURE SEPARATELY.

DATE: PROJECT: TYPE:

Accessories (Configure separately)

SPECIFICATIONS

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

Electrical

PHYSICAL

DRIVER Two (2) 350mA, Class A, constant current drivers. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.9 Power Factor, 0.25A input current, .20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. INC Driver - For use with Incandescent Standard TRIAC or ELV dimmers. 1-100% range, 120V Only. 010 Driver - For use with 0-10V dimmers. 1-100% range, external controls by others.

SURFACE MOUNT For use with side entry, surface conduits. Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation.

HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 3/4” NPT female conduit entries per end cap for through wiring.

INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.

PATENTED KNOCKOUTS Four (4) 3/4” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.

FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).

WARRANTY 5-year limited warranty.

CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.

05/28/2020 SKU-1313 PM2DRM P2

SARATOGA - PM2DRM REMOTE DRIVER HOUSING (SURFACE MOUNT) ORDER FIXTURE SEPARATELY.

DATE:

CATALOG NUMBER LOGIC:

PROJECT: TYPE:

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

SARATOGA - PM2DRM REMOTE DRIVER HOUSING (JUNCTION BOX - Camlock)

CATALOG NUMBER LOGIC

Example: PM2DRM - CT - INC - SAP - MT - MB

MATERIAL

Aluminum

SERIES

PM2DRM - Universal Power Module 2 Dual Remote

MOUNTING

CR - Round Camlock Canopy (Recessed Junction Box)

CT - Rectangular Camlock Canopy (Recessed Junction Box)

CONTROL

INC - 10W TRIAC/ELV Dimming 1-100%, 120V only

010 - 10W Dimming Driver 0-10V Dimming 1-100%

FINISH

Standard Finishes (BZP, BZW, BLP, BLW, WHP, WHW, SAP, VER)

Premium Finish (ABP, AMG, AQW, BCM, BGE, BPP, CAP, CMG, CRI, CRM, HUG, MDS, NBP, OCP, RMG, SDS, SMG, TXF, WCP, WIR)

(Also available in RAL Finishes. See submittal SUB-1439-00)

INPUT VOLTAGE

MT - 120-277 VAC

OPTIONS

MB - Mounting Brackets

05/28/2020 SKU-1313 PM2DRM P3

ORDER FIXTURE SEPARATELY.

DATE: PROJECT: TYPE:

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

REMOTE WIRING

LED DriverRemote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have speci�c wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations:

• Do not exceed 50 foot overall wiring distance using 12 gauge copper wire.

Failure to comply with speci�c wiring requirements will void product warranty.

3"(76mm)

3 1/4"(83mm)

O.C.5"(127mm)

1/8"(3mm)

RECTANGULAR CAMLOCK™ CANOPY

5" Dia.(127mm)

1/8"(3mm)

1/8"(3mm)

ROUND CAMLOCK™ CANOPY

END VIEW

(4) 1/2" (13mm) Knockouts For Use with Surface Conduit (By Others)

2 1/2" (64mm)

With SuppliedMounting Plate6 1/4"

(158mm)

SIDE VIEW

12 1/2"(318mm)

3 3/8"(86mm)

TOP VIEW

OPTIONAL MOUNTING BRACKET

(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)

O.C.

2 1/4"(57mm)

13 7/8”(352mm)

1 3/4"(44mm)

05/28/2020 SKU-1313 PM2DRM P3

SARATOGA - PM2DRM REMOTE DRIVER HOUSING (JUNCTION BOX - Camlock) ORDER FIXTURE SEPARATELY.

DATE: PROJECT: TYPE:

Accessories (Configure separately)

SPECIFICATIONS

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.

559.438.5800 | INFO@BKLIGHTING.COM | BKLIGHTING.COMMADE IN THE USA

Electrical

PHYSICAL

DRIVER Two (2) 350mA, Class A, constant current drivers. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.9 Power Factor, 0.25A input current, .20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. INC Driver - For use with Incandescent Standard TRIAC or ELV dimmers. 1-100% range, 120V Only. 010 Driver - For use with 0-10V dimmers. 1-100% range, external controls by others.

ROUND CAMLOCK CANOPY (RECESSED JUNCTION BOX)

5” dia., machined aluminum construction. Includes stainless steel universal mounting ring for use with 4” octagonal junction box. Two (2) tamper-resistant, black oxide stainless steel mounting screws. 1/8” thick HT-805A silicone foam gasket for water-tight seal. Integral Camlock provides additional 30° adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface.

RECTANGULAR CAMLOCK CANOPY (RECESSED JUNCTION BOX)

Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 1/2” NPT female conduit entries per end cap for through wiring.

HOUSING Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. Two (2) 3/4” NPT female conduit entries per end cap for through wiring.

INSTALLATION TETHER Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.

PATENTED KNOCKOUTS Four (4) 3/4” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.

FINISH StarGuard, our 15-stage, chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating and is RoHS compliant. Finish to match fixture. (specified separately).

WARRANTY 5-year limited warranty.

CERTIFICATION & LISTING Certified to CAN/CSA/ANSI Standards. UL Listed. NEMA 4X / IP66 Rated Enclosure. RoHs compliant. Made in USA with sustainable processes.

05/28/2020 SKU-1313 PM2DRM P3

SARATOGA - PM2DRM REMOTE DRIVER HOUSING (JUNCTION BOX - Camlock) ORDER FIXTURE SEPARATELY.