The Sapura 3000, operated by SapuraAcergy under Joint Venture, is a class-leading deepwater heavy lift and pipelay vessel.

• Length 151m x breadth 38m• 240t S-lay system• 400t J-lay system• Main crane 3,000t• Accommodation for 330 persons• Deck area 3,275m²• 2 x work-class ROVs

seabed-to-surface

Sapura3000Pipelay / Heavy Lift

General InformationType Pipelay / Heavy LiftClassification ABSFlag BahamasYear Built 2008

Principal DimensionsLength Overall (m) 151m without stingerBreadth (m) 38mDepth Main Deck (m) 15mOperating Draft (m) 6.5mGross Tonnage (t) 32,060tTransit Speed (knots) 8 knotsEndurance (days) 45 days (at full DP in pipe lay mode)

DP SystemDP Classification DP class IIReference System 3 x DGPS, 2 x Tautwire, 1 x Fan

beam, 1 x HiPAP, 1 x Sonardyne

Power and PropulsionMain EnginesNumber 6Type Wartsila 32Power (hp) 4000kW

GeneratorsNumber 6Type AlconzaPower (kVA) 3200kVA

ThrustersNumber 2Type Wartsila Lips LCT FS275-SL/ WN

Power (hp) 2400kWLocation Port and starboard sternNumber 5Type Wartsila Lips LMT FS1510-

350/1530 MNRPower (hp) 2,400kWLocation 3 each forward and 2 each aft

Main DeckClear Deck Area (m²) 3,275m²Deck Strength (t/m²) 10t/m²

Capacities Fuel Oil (m³) 2,392m³Lube Oil (m³) 84m³Fresh Water (m³) 3,045m³Ballast Water (m³) 11,562m³

Sapura 3000

AccommodationBerths (No.) 330Cabins (No.) 115

Helideck Type Sikorski S92 mtow: 12.8t

ROV System ROVs (No. and type) 2 x ACV with TMSOperating Depth Rating (m) 3,000m

Cranes Main Crane Capacity (t) 3,000t at 27m radiusManufacturer Huisman BVOperating Water Depth (m) 2,000mLocation At the sternMain Crane Comments 2,200t at 31m radius full revolving

Auxiliary Crane Capacity (t) 2 x 40t at 29m radiusLocation Port and starboardA-frame Capacity (t) 360t

Pipelaying SystemRigid Lay S-Lay and J-Lay

S-Lay:Max Tension (t) 240t nominalTensioners (No. and type) 3 each 80t capacityPipe Range (inches) 6-inch to 60-inchStorage Capacity (t) 4,500tWelding Stations (No.) 9 stations, comprising: 6 x welding 2 x non-destructive testing 1 x coatingStinger (m) 90mOperating Water Depth (m) 2,000mA&R Capacity (t) 360t

J-Lay:Max Tension (t) 400tPipe Range (inches) 4-inch to 20-inch ODWelding Stations (No.) 1Joint Type Double joint with hang off collarOperating Water Depth (m) 3,000mA&R Capacity (t) 360tJ-Lay Comments J-Lay tower not permanently installed

www.subsea7.com© Subsea 7, 2015

Information correct at time of going to press

Mar

ch 2

015