Upload
srikanth-rao
View
159
Download
16
Embed Size (px)
DESCRIPTION
sap
Citation preview
Technology Brief
Installing and Configuring Intermec Device Types for SAP
IntroductionIntermec printers are now certified through the SAP Printer Vendor Program. Integrated barcode labeling with SAP is optimized with Intermec device types for SAP Smart Forms and mySAP Business Suite.
Intermec also continues to support printing barcode labels from SAPScript in SAP R/3, XML-enabled printing in SAP Auto-ID Infrastructure and third-party label design and print management solutions.
Using this documentThis document is intended to assist system integrators and SAP administrators when installing and configuring Intermec device types in a typical SAP system. It is not an exhaustive guide for SAP printing. Knowledge of SAP device administration and appropriate system-level permissions are assumed.
The following documents may be helpful when using Intermec SAP device types: SAP Printing Guide (BC-CCM-PRN) SAP Note # 1760619
Supported PrintersThe following printers are supported by Intermec SAP device types: PM43 and PM43c PD43 and PD43c PC23d, PC43d and PC43t PF2i and PF4i PM4i PX4i and PX6i PD41 and PD42 PB22, PB32 and PB50
Supported Command LanguagesIntermec SAP device types support Direct Protocol. No other printer command languages are supported.
Supported Host SystemsIntermec device types for SAP support printing from Smart Forms and mySAP Business Suite. The Device Type Printer Wizard described in this document is available on SAP BASIS 6.20 and higher with the following Support Packages installed: SAP_BASIS Release 6.20: SAPKB62063 SAP_BASIS Release 6.40: SAPKB64021 SAP_BASIS Release 7.00: SAPKB70014 SAP_BASIS Release 7.10: SAPKB71004
Download SAP Device TypesThe Intermec SAP Device Types may be downloaded from www.intermec.com/SAP. The following files are included in the device type package: ABAP Page Description Language (PDL) Driver PRI files Device Types. There is one *.PRI file for each
printer type as follows: Printer Type Supported Printers
Intermec 6 inch (203 dpi) DP PX6i
Intermec 6 inch (300 dpi) DP PX6i
Intermec 6 inch (406 dpi) DP PX6i
Intermec 4 inch (203 dpi) DP PX4i, PM4i, PM43, PM43c, PF4i, PD41 , PD42, PC43d, PC43t, PB50
Intermec 4 inch (300 dpi) DP PX4i, PM4i, PM43, PD4x, PC43
Intermec 4 inch (406 dpi) DP PX4i, PM4i, PM43, PM43c
Intermec 3 inch (203 dpi) DP PB32
Intermec 2 inch (203 dpi) DP PF2i, PC23d, PB22
Intermec 2 inch (300 dpi) DP PC23d
Save the Intermec device type package to a location on your server and extract the files
Importing SAP Device Types Before Intermec printers can be recognized by the SAP system, the printer device types and driver must be installed. Install the device types as follows:
1. Logon to the SAP System
2. Open Spool Administration (browse or type SPAD in the transaction code area)
3. Select Utilities(M)For device typesImport
4. Select Device Type and insert the Object name; Insert the .PRI file location and click Execute.
Installing the Transport PackageInstall the ABAP PDL drivers for Intermec printers using the following steps:
1. Copy the transport files to the proper locations in your SAP system:
a. Copy the K*.PVD to the Cofile folder located at D:\usr\sap\trans\cofile
b. Copy the R*.PVD to the Data folder located at D:\usr\sap\trans\data
2. Logon to the SAP ECC Dev System
3. Open transaction STMS (Browse or type STMS in the transaction code area)
4. Select ExtrasOther RequestsAdd
5. Enter the target client and click the Check box
6. Search for the desired transport using the *wildcard selection and the transport file name (do not include the .PVD extension) and click the Check box
7. Identify the desired Transport Number and select it
8. Verify Transport Request and click the Check box
9. Click Yes to attach the Transport to the import queue.
Configuring an Intermec Output DeviceThis section describes how to create and configure an Intermec device using the Device Type Printer Wizard. Import of Intermec device types and driver should be completed prior to this step as described in previous sections of this document.
1. Open Spool Administration (browse or type SPAD in the transaction code area)
2. Click Display next to Output Devices
3. Click the Change icon
4. Click the Create icon
5. Enter the Output Device name, the Short name and click on the Wizard icon
6. From the Device Type Selection Window select Intermec from the Manufacturers Name drop down box and click the Show Printers button to see the list of available Intermec printers Right-click a printer to select it and then click the Check box
7. Enter the printer Model and Location as necessary
8. Click on the Access Method tab
9. Select the Host Spool Access Method, available methods for Intermec Device Types are: F: Printing on Front End Computer, or G: Front End Printing with Control Tech
10. Enter _DEFAULT in the Host Printer field to route print jobs from the local machine to the default installed printer Checking No Device Selection at Frontend will route jobs to the default printer Click the Save icon.
Standard FeaturesThis section outlines the standard features that are found in Intermecs SAP device types implementation.
BarcodesBarcode Name Description Options
INT2OF5 Interleaved 2 of 5
Linear height, rotation, ratio, check digit, no human readable
CODE39 Code 39 Linear height, rotation, ratio, check digit, no human readable
CODE39A Code 39 (full ASCII)
Linear height, rotation, ratio, full ascii character set, human readable
CODE93 Code 93 Linear height, rotation, check digit, human readable
CODE128 Code 128 Linear height, rotation, full ascii character set, subset a, b and c, human readable
EAN8 EAN-8 Rotation, check digit, human readable
EAN13 EAN-13 Rotation, check digit, no human readable
POSTNET USPS POSTNET 5 and USPS POSTNET 9
Rotation, check digit, no human readable
PDF417 Rotation, security level, linear height, columns, rows, truncation
MSI MSI Rotation, ratio of the small bars, no human readable
GraphicsThe following graphics type is supported with Intermec SAP device types: Monochrome bitmap images are supported on PM, PD and
PC Series printers
ShapesThe following shape types are supported with Intermec SAP device types: Box Horizontal and vertical lines
FontsThe following font functionality is supported with Intermec SAP device types: Downloading of TrueType fonts from SAP Italics UTF-8 code page
The following SAP Font Families are supported with printer resident fonts:
SAP Font Family
COURIER MICR_E
HELVE COURCYR
LETGOTH COUR_I7
OCRA HELVCYR
OCRB HELV_I7
TIMES TIMECYR
LNPRINT TIME_I7
MICR_C
The following SAP Font Families are supported through downloadable fonts:
SAP Font Family
A_SIMP KPBATANP
A_TRAD KPDODUM
A_TRAN KPGULIM
CNHEI KPGUNGSE
CNKAI KPSAMMUL
CNSONG THANGSAN
CNSONGP THDRAFT
DBGOTHIC THVIJIT
DBMINCHO TWDPHEI
JPMINCHO TWMING
JPMINCHP TWMINGP
KPBATANG TWSONG
RFIDThe following RFID functionality is supported with Intermec SAP device types: ISO 18000-6C/EPC Gen2 Write support for RFID inlays Protection for RFID inlays Writing KILL PASSCODE into memory for RFID inlays Writing into EPC memory bank starts at position 4 Writing into USR memory bank starts at position 0
Limitations/ConsiderationsPrinter Configuration and Status Printer command languages IPL, ESIM, ZSIM, DSIM, CSIM, XSIM
or ESC/P are not supported Printer settings, including media settings, are not configurable
via the SAP system SAP print options are not supported SNMP status feedback is not provided
Fonts The following font options are not supported or have limitations where noted: Cascading fonts Bitmap fonts Underline Superscript/Subscript Code pages other than UTF-8 PB22, PB32 and PB50 do not support printing Cyrillic characters Asian language fonts may have wider or narrower spacing when
compared to the mapped SAP standard system fonts.
Printer Hardware Cutter Control is not configurable via the SAP system Pre-defined finishing modes, such as cut and peel off, are not
configurable via the SAP system
North AmericaCorporate Headquarters6001 36th Avenue WestEverett, Washington 98203Phone: (425) 348 2600Fax: (425) 355 9551
North Latin America Headquarters OfficeMexicoPhone: (+52) 55 52 41 48 00Toll Free NOLA:01800 490 4990
South Latin AmericaHeadquarters Office BrazilPhone: (+55) 11 3711 6776Fax: (+55) 11 5502 6780
Europe, Middle East & Africa Headquarters OfficeReading, United KingdomPhone: (+44) 118 923 0800Fax: (+44) 118 923 0801
Asia Pacific Headquarters OfficeSingaporePhone: (+65) 6303 2100Fax: (+65) 6303 2199
Media SalesEMEA: (+31) 24 372 3167USA: (513) 874 5882http://intermec.custhelp.com
SalesToll Free NA: (800) 934 3163Toll in NA: (425) 348 2726Freephone ROW: 00800 4488 8844
OEM SalesPhone: (425) 348 2762
Customer Service and SupportToll Free NA: (800) 755 5505Toll in NA: (425) 356 1799EMEA: intermec.custhelp.com
Internetwww.intermec.com
Worldwide Locationswww.intermec.com/locations
Graphics Print jobs with graphics will not be printed on the following printers:
PF2i and PF4i configurations PM4i configurations PX4i and PX6i configurations PD41 and PD42 configurations PB22, PB32 and PB50 configurations
Color graphics are not supported Automatic image scaling across different DPI printers is not
supported
OtherSending very large print jobs over a wireless interface to the PB22 and PB32 may fail. This is not related to the SAP device type, but rather an issue in the printer firmware. This issue will be resolved in a future firmware release.
ReferencesOther suggested reading: SAP Device Types Release Notes in the Intermec Device Types
download packet Whitepaper: Bar Code & RFID Label Printing: Options for
Printing from SAP SAP Printing Guide (BC-CCM-PRN)
ConclusionIntermec device types and drivers for SAP make Intermec printers even easier to integrate with SAP Smart Forms and mySAP Business Suite.
While this document is intended to assist system integrators and SAP administrators when installing and configuring Intermec device types in a typical SAP system, it is not an exhaustive guide for SAP printing. Please refer to the SAP Printing Guide.
More information about integrating Intermec devices with SAP may be found at www.intermec.com/SAP.
2014 Honeywell International Inc.612286-B 12/14